42 lines
2.1 KiB
Python
42 lines
2.1 KiB
Python
#File: Ex025_Revolution.py
|
|
#To use this example file, you need to first follow the "Using CadQuery From Inside FreeCAD"
|
|
#instructions here: https://github.com/dcowden/cadquery#installing----using-cadquery-from-inside-freecad
|
|
|
|
#You run this example by typing the following in the FreeCAD python console, making sure to change
|
|
#the path to this example, and the name of the example appropriately.
|
|
#import sys
|
|
#sys.path.append('/home/user/Downloads/cadquery/examples/FreeCAD')
|
|
#import Ex025_Revolution
|
|
|
|
#If you need to reload the part after making a change, you can use the following lines within the FreeCAD console.
|
|
#reload(Ex025_Revolution)
|
|
|
|
#You'll need to delete the original shape that was created, and the new shape should be named sequentially
|
|
# (Shape001, etc).
|
|
|
|
#You can also tie these blocks of code to macros, buttons, and keybindings in FreeCAD for quicker access.
|
|
#You can get a more information on this example at
|
|
# http://parametricparts.com/docs/examples.html#an-extruded-prismatic-solid
|
|
|
|
import cadquery
|
|
import Part
|
|
|
|
#The dimensions of the model. These can be modified rather than changing the shape's code directly.
|
|
rectangle_width = 10.0
|
|
rectangle_length = 10.0
|
|
angle_degrees = 360.0
|
|
|
|
#Revolve a cylinder from a rectangle
|
|
#Switch comments around in this section to try the revolve operation with different parameters
|
|
result = cadquery.Workplane("XY").rect(rectangle_width, rectangle_length, False).revolve()
|
|
#result = cadquery.Workplane("XY").rect(rectangle_width, rectangle_length, False).revolve(angle_degrees)
|
|
#result = cadquery.Workplane("XY").rect(rectangle_width, rectangle_length).revolve(angle_degrees,(-5,-5))
|
|
#result = cadquery.Workplane("XY").rect(rectangle_width, rectangle_length).revolve(angle_degrees,(-5, -5),(-5, 5))
|
|
#result = cadquery.Workplane("XY").rect(rectangle_width, rectangle_length).revolve(angle_degrees,(-5,-5),(-5,5), False)
|
|
|
|
#Revolve a donut with square walls
|
|
#result = cadquery.Workplane("XY").rect(rectangle_width, rectangle_length, True).revolve(angle_degrees, (20, 0), (20, 10))
|
|
|
|
#Boiler plate code to render our solid in FreeCAD's GUI
|
|
Part.show(result.toFreecad())
|