modeling-app/rust/kcl-lib/tests/rotate_after_fillet/unparsed.snap

---
source: kcl-lib/src/simulation_tests.rs
description: Result of unparsing rotate_after_fillet.kcl
---
export boltDiameter = 0.625
export boltLength = 2.500
export boltHeadLength = boltDiameter
export boltHeadDiameter = 0.938
export boltHexDrive = 1 / 2
export boltHexFlatLength = boltHexDrive / (2 * cos(toRadians(30)))
export boltThreadLength = 1.75

export fn bolt() {
  // Create the head of the cap screw
  boltHead = startSketchOn(XZ)
    |> circle(center = [0, 0], radius = boltHeadDiameter / 2, tag = $topEdge)
    |> extrude(length = -boltHeadLength)
    |> fillet(radius = 0.020, tags = [topEdge, getOppositeEdge(topEdge)])

  // Define the sketch of the hex pattern on the screw head
  hexPatternSketch = startSketchOn(boltHead, 'start')
    |> startProfileAt([
         boltHexDrive / 2,
         boltHexFlatLength / 2
       ], %)
    |> angledLine(angle = 270, length = boltHexFlatLength)
    |> angledLine(angle = 210, length = boltHexFlatLength)
    |> angledLine(angle = 150, length = boltHexFlatLength)
    |> angledLine(angle = 90, length = boltHexFlatLength)
    |> angledLine(angle = 30, length = boltHexFlatLength)
    |> close()
    |> extrude(length = -boltHeadLength * 0.75)

  boltBody = startSketchOn(boltHead, 'end')
    |> circle(center = [0, 0], radius = boltDiameter / 2, tag = $filletEdge)
    |> extrude(length = boltLength)
    |> fillet(radius = .020, tags = [getOppositeEdge(filletEdge)])
    |> appearance(color = "#4dd043", metalness = 90, roughness = 90)

  return boltBody
}

bolt()
  |> rotate(roll = 3.14, pitch = 3.14, yaw = 3.14)

// https://www.mcmaster.com/91251a404/