modeling-app/rust/kcl-lib/e2e/executor/inputs/server-rack-heavy.kcl

//Zoo server rack model with fully detailed vertical rails

const bendRad = 0.05
const thickness = 0.1046
const railHeight = 45 // u
const originStart = [4, 1, 5.114]
const depth = 48
const serverDepth = 31
const width = 21.53

// simple caster model at each corner
fn caster = (originStart) => {
  const plane001c = {
      origin: [
        -(3.543 - 2.756) / 2 + originStart[0],
        -(3.543 - 2.756) / 2 + originStart[1],
        4.114
      ],
      x_axis: [1.0, 0.0, 0.0],
      y_axis: [0.0, 1.0, 0.0],
      z_axis: [0.0, 0.0, 1.0]
  }

  const sketch001c = startSketchOn(plane001c)
    |> startProfileAt([0, 0], %)
    |> xLine(length = 3.543)
    |> yLine(length = 3.543)
    |> xLine(length = -3.543)
    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
    |> close()
    |> hole(circle(center = [
         (3.543 - 2.756) / 2,
         (3.543 - 2.756) / 2
       ], radius = 8.8 / 2 / 25.4), %)
    |> hole(circle(center = [
         (3.543 - 2.756) / 2 + 2.756,
         (3.543 - 2.756) / 2
       ], radius = 8.8 / 2 / 25.4 ), %)
    |> hole(circle(center = [
         (3.543 - 2.756) / 2,
         (3.543 - 2.756) / 2 + 2.756
       ], radius = 8.8 / 2 / 25.4 ), %)
    |> hole(circle(center = [
         (3.543 - 2.756) / 2 + 2.756,
         (3.543 - 2.756) / 2 + 2.756
       ], radius = 8.8 / 2 / 25.4 ), %)
    |> extrude(length = -.25)

  const sketch002c = startSketchOn(sketch001c, face = 'START')
    |> startProfileAt([-originStart[0], 2.2 + originStart[1]], %)
    |> arc(
         angle_start = 30,
         angle_end = 330,
         radius = 3.2 / 2
       )
    |> close()
    |> extrude(length = 3.1)

  const plane002c = {
      origin: [
        0 + originStart[0],
        0.8 + originStart[1],
        0
      ],
      x_axis: [1, 0, 0],
      y_axis: [0, 0, 1],
      z_axis: [1, 0, 0]
  }
  const sketch003c = startSketchOn(plane002c)
    |> circle(center = [0, 1.2], radius = 2.48 / 2)
  const examplec = extrude(sketch003c, length = -1 - (3 / 16))
  return examplec
}

// generate 4 casters
caster([
  (3.543 - 2.756) / 2,
  (3.543 - 2.756) / 2 + 2.75
])
caster([
  -(3.543 - 2.756) / 2 + width - 2.756,
  (3.543 - 2.756) / 2 + .4
])
caster([
  (3.543 - 2.756) / 2,
  serverDepth + 5 - ((3.543 - 2.756) / 2) - 2.2
])
caster([
  -(3.543 - 2.756) / 2 + width - 2.756,
  depth - ((3.543 - 2.756) / 2) - 2.756 - 1.7
])

// left wall
const plane001 = {
    origin: [
      originStart[0] - 4,
      originStart[1] + 2,
      4.114
    ],
    x_axis: [0, 1, 0],
    y_axis: [0, 0, 1],
    z_axis: [1, 0, 0]
}

const sketch001l = startSketchOn(plane001)
  |> startProfileAt([0, 0], %)
  |> xLine(length = serverDepth + .8)
  |> angledLine(angle = -45, endAbsoluteY = 1)
  |> xLine(length = -serverDepth + 2 - .8, tag = $seg01)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude001l = extrude(sketch001l, length = 1)

const sketch002l = startSketchOn(plane001)
  |> startProfileAt([serverDepth + .8, 0], %)
  |> yLine(length = railHeight * 1.75 + 2)
  |> angledLine(angle = -135, endAbsoluteX = serverDepth - 1 + .8)
  |> yLine(length = -railHeight * 1.75)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude002l = extrude(sketch002l, length = 1)

const sketch003l = startSketchOn(plane001)
  |> startProfileAt([
       serverDepth + .8,
       railHeight * 1.75 + 2
     ], %)
  |> xLine(length = -serverDepth - .8, tag = $seg02)
  |> angledLine(angle = -45, endAbsoluteY = railHeight * 1.75 - 1 + 2)
  |> xLine(length = serverDepth - 2 + .8)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude003l = extrude(sketch003l, length = 1)

const sketch004l = startSketchOn(plane001)
  |> startProfileAt([0, 0], %)
  |> yLine(length = railHeight * 1.75 + 2)
  |> angledLine(angle = 135, endAbsoluteY = railHeight * 1.75 + 2 - 1)
  |> yLine(length = -railHeight * 1.75)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude004l = extrude(sketch004l, length = 1)

const sketch005l = startSketchOn(plane001)
  |> startProfileAt([serverDepth - 1.25, 1], %)
  |> line(end = [-serverDepth + 2.25, railHeight * 1.75], tag = $lineToIntersect4)
  |> xLine(length = 1)
  |> line(end = [serverDepth - 2.25, -railHeight * 1.75], tag = $lineToIntersect5)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude005l = extrude(sketch005l, length = 1)

const sketch006l = startSketchOn(plane001)
  |> startProfileAt([1, 1], %)
  |> angledLineThatIntersects(
       angle = 70,
       intersectTag = lineToIntersect4,
       offset = 0,
     )
  |> angledLine(angle = -70, length = 1.414 )
  |> angledLine(angle = 70 + 180, endAbsoluteY = 2 - 1)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude006l = extrude(sketch006l, length = 1)

const sketch007l = startSketchOn(plane001)
  |> startProfileAt([
       serverDepth - 1.2,
       railHeight * 1.75 + 1
     ], %)
  |> angledLineThatIntersects(
       angle = 70,
       intersectTag = lineToIntersect5,
       offset = 0,
     )
  |> angledLine(angle = -70, length = 1.414 )
  |> angledLine(angle = 70 + 180, endAbsoluteY = railHeight * 1.75 + 1)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude007l = extrude(sketch007l, length = 1)

// right wall
const plane002 = {
    origin: [
      originStart[0] - 4 + width - 1,
      originStart[1] - 1,
      4.114
    ],
    x_axis: [0, 1, 0],
    y_axis: [0, 0, 1],
    z_axis: [1, 0, 0]
}

const sketch001w = startSketchOn(plane002)
  |> startProfileAt([0, 0], %)
  |> xLine(length = depth)
  |> angledLine(angle = -45, endAbsoluteY = 1)
  |> xLine(length = -depth + 2, tag = $seg01w)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude001w = extrude(sketch001w, length = 1)

const sketch002w = startSketchOn(plane002)
  |> startProfileAt([depth, 0], %)
  |> yLine(length = railHeight * 1.75 + 2)
  |> angledLine(angle = -135, endAbsoluteX = depth - 1)
  |> yLine(length = -railHeight * 1.75)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude002w = extrude(sketch002w, length = 1)

const sketch003w = startSketchOn(plane002)
  |> startProfileAt([depth, railHeight * 1.75 + 2], %)
  |> xLine(length = -depth, tag = $seg02w)
  |> angledLine(angle = -45, endAbsoluteY = railHeight * 1.75 - 1 + 2)
  |> xLine(length = depth - 2)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude003w = extrude(sketch003w, length = 1)

const sketch004w = startSketchOn(plane002)
  |> startProfileAt([0, 0], %)
  |> yLine(length = railHeight * 1.75 + 2)
  |> angledLine(angle = 135, endAbsoluteY = railHeight * 1.75 + 2 - 1)
  |> yLine(length = -railHeight * 1.75)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude004w = extrude(sketch004w, length = 1)

const sketch005w = startSketchOn(plane002)
  |> startProfileAt([1, 40.6 + 1.75 / 2], %)
  |> angledLine(angle = -23, length = 35.5 )
  |> angledLine(angle = -23 + 90 + 45, length = 1.413 )
  |> angledLine(angle = -23, endAbsoluteX = 1, tag = $lineToIntersect)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude005w = extrude(sketch005w, length = 1)

const sketch006w = startSketchOn(plane002)
  |> startProfileAt([
       1 + 35.5 * cos(23 * pi() / 180),
       40.6 - (35.5 * sin(23 * pi() / 180)) + 1.75 / 2
     ], %)
  |> angledLine(angle = -23 + 90, endAbsoluteX = depth - 1)
  |> yLine(length = 2.56)
  |> angledLineThatIntersects(
       angle = -23 + 90 + 180,
       intersectTag = lineToIntersect,
       offset = 0,
       tag = $lineToIntersect2,
     )
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude006w = extrude(sketch006w, length = 1)

const sketch007w = startSketchOn(plane002)
  |> startProfileAt([depth - 1, 60.65 + 1.75 / 2], %)
  |> angledLine(angle = -23 + 180, length = 34.93 , tag = $lineToIntersect3)
  |> angledLine(angle = 23 - 90, length = 1.414 )
  |> angledLineThatIntersects(
       angle = -23 + 180,
       intersectTag = lineToIntersect2,
       offset = 0,
     )
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude007w = extrude(sketch007w, length = 1)

const sketch008w = startSketchOn(plane002)
  |> startProfileAt([1, 41.7 + 1.75 / 2], %)
  |> angledLineThatIntersects(
       angle = -23 + 90,
       intersectTag = lineToIntersect3,
       offset = 0,
     )
  |> angledLine(angle = -23 - 45, length = 1.414 )
  |> angledLineThatIntersects(
       angle = -23 - 90,
       intersectTag = lineToIntersect,
       offset = 0,
     )
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude008w = extrude(sketch008w, length = 1)

const sketch009w = startSketchOn(plane002)
  |> startProfileAt([31.2, 33.3 + 1.75 / 2], %)
  |> angledLine(angle = -23 - 45, length = 1.414 )
  |> angledLine(angle = 90 - 23, length = 28 )
  |> angledLine(angle = -23 + 45, length = -1.414 )
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude009w = extrude(sketch009w, length = 1)

const sketch010w = startSketchOn(plane002)
  |> startProfileAt([31.2, 33.3 + 1.75 / 2], %)
  |> angledLine(angle = -23 - 45, length = 1.414 )
  |> angledLine(angle = 180 - 23, length = 28 )
  |> angledLine(angle = -23 + 45, length = 1.414 )
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude010w = extrude(sketch010w, length = 1)

const sketch011w = startSketchOn(plane002)
  |> startProfileAt([
       31.2 - ((28 - 2) * cos(23 * pi() / 180)),
       33.3 + (28 - 2) * sin(23 * pi() / 180) + 1.75 / 2
     ], %)
  |> angledLine(angle = 90 - 23, length = 28 - 2 )
  |> angledLine(angle = -23 - 45, length = -1.414 )
  |> angledLine(angle = 90 - 23 + 180, length = 28 )
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude011w = extrude(sketch011w, length = 1)

const sketch012w = startSketchOn(plane002)
  |> startProfileAt([
       31.2 + (28 - 2) * sin(23 * pi() / 180),
       33.3 + (28 - 2) * cos(23 * pi() / 180) + 1.75 / 2
     ], %)
  |> angledLine(angle = 180 - 23, length = 28 - 2 )
  |> angledLine(angle = -23 - 45, length = -1.414 )
  |> angledLine(angle = -23, length = 28 )
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude012w = extrude(sketch012w, length = 1)

const sketch013w = startSketchOn(plane002)
  |> startProfileAt([
       1 + 4 * cos(23 * pi() / 180),
       40.6 - (4 * sin(23 * pi() / 180)) + 1.75 / 2
     ], %)
  |> angledLine(angle = -23, length = 1 )
  |> angledLine(angle = -23 + 90, endAbsoluteX = 1)
  |> yLine(length = 2.56)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude013w = extrude(sketch013w, length = 1)

const sketch014w = startSketchOn(plane002)
  |> startProfileAt([
       1 + 12 * cos(23 * pi() / 180),
       40.6 - (12 * sin(23 * pi() / 180)) + 1.75 / 2
     ], %)
  |> angledLine(angle = -23 - 90, length = 36 / 2 )
  |> angledLine(angle = -23, length = 1 )
  |> angledLine(angle = -23 - 90, length = -36 / 2 )
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude014w = extrude(sketch014w, length = 1)

const sketch015w = startSketchOn(plane002)
  |> startProfileAt([
       1 + (36 - 5.55 - 8) * cos(23 * pi() / 180),
       40.6 - ((36 - 5.55 - 8) * sin(23 * pi() / 180)) + 1.75 / 2
     ], %)
  |> angledLine(angle = -23 - 90, length = 36 / 2 )
  |> angledLine(angle = -23, length = 1 )
  |> angledLine(angle = -23 - 90, length = -36 / 2 )
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude015w = extrude(sketch015w, length = 1)

const sketch016w = startSketchOn(plane002)
  |> startProfileAt([
       1 + (36 - 5.5) * cos(23 * pi() / 180),
       40.6 - ((36 - 5.5) * sin(23 * pi() / 180)) + 1.75 / 2
     ], %)
  |> angledLine(angle = -23 - 90, length = 36 / 2 )
  |> angledLine(angle = -23, length = 1 )
  |> angledLine(angle = -23 - 90, length = -36 / 2 )
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude016w = extrude(sketch016w, length = 1)

const sketch017w = startSketchOn(plane002)
  |> startProfileAt([
       depth - 1 - (3.7 * cos(23 * pi() / 180)),
       60.65 + 3.7 * sin(23 * pi() / 180) + 1.75 / 2
     ], %)
  |> arc(angleStart = -23, angleEnd = 180 - 23, radius = 7 / 2 + 2)
  |> angledLine(angle = -23 + 180, length = -1 )
  |> arc(angleStart = 180 - 23, angleEnd = -23, radius = 7 / 2 + 1)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude017w = extrude(sketch017w, length = 1)

const sketch018w = startSketchOn(plane002)
  |> startProfileAt([
       depth - 1 - (19.3 * cos(23 * pi() / 180)),
       60.65 + 19.3 * sin(23 * pi() / 180) + 1.75 / 2
     ], %)
  |> arc(angleStart = -23, angleEnd = 180 - 23, radius = 7 / 2 + 2)
  |> angledLine(angle = -23 + 180, length = -1 )
  |> arc(angleStart = 180 - 23, angleEnd = -23, radius = 7 / 2 + 1)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude018w = extrude(sketch018w, length = 1)

const sketch019w = startSketchOn(plane002)
  |> startProfileAt([1, 27.8 + 1.75 / 2], %)
  |> angledLine(angle = -23, length = 7 )
  |> angledLine(angle = -23 + 90, length = -1 )
  |> angledLine(angle = -23, endAbsoluteX = 1)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude019w = extrude(sketch019w, length = 1)

const sketch020w = startSketchOn(plane002)
  |> startProfileAt([
       1 + (36 - 5.53 - 12) * cos(23 * pi() / 180),
       27.8 + 1.75 / 2 - ((36 - 5.53 - 12) * sin(23 * pi() / 180))
     ], %)
  |> angledLine(angle = -23, length = 7 )
  |> angledLine(angle = -23 + 90, length = -1 )
  |> angledLine(angle = -23 + 180, length = 7 )
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude020w = extrude(sketch020w, length = 1)

const sketch021w = startSketchOn(plane002)
  |> startProfileAt([1, 21.9], %)
  |> angledLine(angle = -23, endAbsoluteX = depth - 1)
  |> yLine(length = -1.1)
  |> angledLine(angle = -23, endAbsoluteX = 1)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude021w = extrude(sketch021w, length = 1)

const sketch022w = startSketchOn(plane002)
  |> startProfileAt([depth - 1, 74.1], %)
  |> angledLine(angle = 180 - 23, endAbsoluteY = railHeight * 1.75 + 1)
  |> xLine(length = -2.56)
  |> angledLine(angle = -23, endAbsoluteX = depth - 1)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude022w = extrude(sketch022w, length = 1)

const sketch023w = startSketchOn(plane002)
  |> startProfileAt([1, 69.53 + 1.75], %)
  |> angledLine(angle = 90 - 23, endAbsoluteY = railHeight * 1.75 + 1)
  |> xLine(length = 1.086)
  |> angledLine(angle = 90 - 23, endAbsoluteX = 1)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude023w = extrude(sketch023w, length = 1)

const sketch024w = startSketchOn(plane002)
  |> startProfileAt([1, 16.5], %)
  |> angledLine(angle = -23, endAbsoluteY = 1)
  |> xLine(length = -2.56)
  |> angledLine(angle = -23, endAbsoluteX = 1)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude024w = extrude(sketch024w, length = 1)

const sketch025w = startSketchOn(plane002)
  |> startProfileAt([1, 4], %)
  |> angledLine(angle = -23, endAbsoluteY = 1)
  |> xLine(length = -2.56)
  |> angledLine(angle = -23, endAbsoluteX = 1)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude025w = extrude(sketch025w, length = 1)

// Base plane of rack
const plane003 = {
    origin: [0, 0, 4.114],
    x_axis: [1, 0, 0],
    y_axis: [0, 1, 0],
    z_axis: [0, 0, 1]
}

const sketch005 = startSketchOn(plane003)
  |> startProfileAt([width - 1, 0], %)
  |> line(end = [-width + 2, 3])
  |> line(end = [0, 1])
  |> line(end = [width - 2, -3])
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()

const extrude005 = extrude(sketch005, length = 1)

const sketch006 = startSketchOn(plane003)
  |> startProfileAt([width - 1, 0 + 2.756], %)
  |> line(end = [-width + 2, 3])
  |> line(end = [0, 1])
  |> line(end = [width - 2, -3])
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()

const extrude006 = extrude(sketch006, length = 1)

const sketch007 = startSketchOn(plane003)
  |> startProfileAt([width - 1, depth], %)
  |> line(end = [-width + 1, -depth + serverDepth + 3.8])
  |> line(end = [1, 0])
  |> line(end = [0, -.75])
  |> line([
       width - 2,
       depth - serverDepth - 5 + .6
     ], %)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude007 = extrude(sketch007, length = 1)

const sketch008 = startSketchOn(plane003)
  |> startProfileAt([width - 1, depth - 2.8], %)
  |> line(end = [-width + 2, -depth + serverDepth + 4.4])
  |> line(end = [0, -1.32])
  |> line(end = [width - 2, depth - serverDepth - 4.4])
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()

const extrude008 = extrude(sketch008, length = 1)

// Top Plane
const plane004 = {
    origin: [0, 0, 4.114 + railHeight * 1.75 + 2],
    x_axis: [1, 0, 0],
    y_axis: [0, 1, 0],
    z_axis: [0, 0, 1]
}

const sketch005t = startSketchOn(plane004)
  |> startProfileAt([width - 1, 0], %)
  |> line(end = [-width + 2, 3])
  |> line(end = [0, 1])
  |> line(end = [width - 2, -3])
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()

const extrude005t = extrude(sketch005t, length = -1)

const sketch007t = startSketchOn(plane004)
  |> startProfileAt([width - 1, depth], %)
  |> line(end = [-width + 1, -depth + serverDepth + 3.8])
  |> line(end = [1, 0])
  |> line(end = [0, -.75])
  |> line([
       width - 2,
       depth - serverDepth - 5 + .6
     ], %)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude007t = extrude(sketch007t, length = -1)

const sketch008t = startSketchOn(plane004)
  |> startProfileAt([width - 1, 0 + 2.756], %)
  |> line(end = [-width + 2, 3])
  |> line(end = [0, 1])
  |> line(end = [width - 2, -3])
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude008t = extrude(sketch008t, length = -1)

const sketch009t = startSketchOn(plane004)
  |> startProfileAt([width - 1, depth - 2.8], %)
  |> line(end = [-width + 2, -depth + serverDepth + 4.4])
  |> line(end = [0, -1.32])
  |> line(end = [width - 2, depth - serverDepth - 4.4])
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()

const extrude009t = extrude(sketch009t, length = -1)

// front left vertical rail
// Define planes so the rail can be moved
const planeXYfl = {
    origin: [0, 0, originStart[2]],
    xAxis: [1.0, 0.0, 0.0],
    yAxis: [0.0, 1.0, 0.0],
    zAxis: [0.0, 0.0, 1.0]
}

const planeXZfl = {
    origin: [originStart[1], originStart[0], originStart[2]],
    xAxis: [0, 1, 0],
    yAxis: [0, 0, 1],
    zAxis: [1, 0, 0]
}

const planeYZfl = {
    origin: [originStart[1], originStart[0], originStart[2]],
    xAxis: [-1, 0, 0],
    yAxis: [0, 0, 1],
    zAxis: [1, 0, 0]
}

// Base flange
const sketch001fl = startSketchOn(planeXZfl)
  |> startProfileAt([bendRad + thickness, 0], %)
  |> angledLine(angle = 0, length = 2 - bendRad - thickness, tag = $rectangleSegmentA001fl)
  |> angledLine(angle = segAng(rectangleSegmentA001fl) + 90, length = railHeight * 1.75, tag = $rectangleSegmentB001fl)
  |> angledLine(angle = segAng(rectangleSegmentA001fl), length = -segLen(rectangleSegmentA001fl), tag = $rectangleSegmentC001fl)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude001fl = extrude(sketch001fl, length = thickness)

// First flange
const sketch002fl = startSketchOn(planeYZfl)
  |> startProfileAt([-bendRad - thickness, 0], %)
  |> angledLine(angle = 180, length = 0.89 - bendRad - thickness, tag = $rectangleSegmentA002fl)
  |> angledLine(angle = segAng(rectangleSegmentA002fl) - 90, length = railHeight * 1.75, tag = $rectangleSegmentB002fl)
  |> angledLine(angle = segAng(rectangleSegmentA002fl), length = -segLen(rectangleSegmentA002fl), tag = $rectangleSegmentC002fl)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()

const extrude002fl = extrude(sketch002fl, length = thickness)

// Bend
const sketch003fl = startSketchOn(planeXYfl)
  |> startProfileAt([0 + thickness + bendRad+originStart[1], originStart[0]], %)
  |> arc(angleStart = 270, angleEnd = 180, radius = bendRad + thickness)
  |> xLine(length = thickness)
  |> arc(angleStart = 180, angleEnd = 270, radius = bendRad)
  |> yLine(length = -thickness)
  |> close()

const extrude003fl = extrude(sketch003fl, length = railHeight * 1.75)

// EIA-310-D standard hole pattern
const sketch004fl = startSketchOn(extrude002fl, face = 'START')
  |> startProfileAt([0.72 + originStart[1], originStart[2] + 0.15], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA003fl)
  |> angledLine(angle = segAng(rectangleSegmentA003fl) - 90, length = 0.375, tag = $rectangleSegmentB003fl)
  |> angledLine(angle = segAng(rectangleSegmentA003fl), length = -segLen(rectangleSegmentA003fl), tag = $rectangleSegmentC003fl)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude004fl = extrude(sketch004fl, length = -thickness)

// EIA-310-D standard hole pattern
const sketch005fl = startSketchOn(extrude002fl, face = 'START')
  |> startProfileAt([0.72 + originStart[1],originStart[2] +  0.15 + .62], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA004fl)
  |> angledLine(angle = segAng(rectangleSegmentA004fl) - 90, length = 0.375, tag = $rectangleSegmentB004fl)
  |> angledLine(angle = segAng(rectangleSegmentA004fl), length = -segLen(rectangleSegmentA004fl), tag = $rectangleSegmentC004fl)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude005fl = extrude(sketch005fl, length = -thickness)

// EIA-310-D standard hole pattern
const sketch006fl = startSketchOn(extrude002fl, face = 'START')
  |> startProfileAt([
       0.72 + originStart[1],
      originStart[2] + 0.15 + 0.62 + 0.50
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA005fl)
  |> angledLine(angle = segAng(rectangleSegmentA005fl) - 90, length = 0.375, tag = $rectangleSegmentB005fl)
  |> angledLine(angle = segAng(rectangleSegmentA005fl), length = -segLen(rectangleSegmentA005fl), tag = $rectangleSegmentC005fl)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude006fl = extrude(sketch006fl, length = -thickness)

// EIA-310-D standard hole pattern
const sketch007fl = startSketchOn(extrude001fl, face = 'START')
  |> startProfileAt([-1.45 - originStart[0], originStart[2] + 0.15], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA006fl)
  |> angledLine(angle = segAng(rectangleSegmentA006fl) - 90, length = 0.375, tag = $rectangleSegmentB006fl)
  |> angledLine(angle = segAng(rectangleSegmentA006fl), length = -segLen(rectangleSegmentA006fl), tag = $rectangleSegmentC006fl)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude007fl = extrude(sketch007fl, length = -thickness)

// EIA-310-D standard hole pattern
const sketch008fl = startSketchOn(extrude001fl, face = 'START')
  |> startProfileAt([-1.45 - originStart[0],originStart[2] + 0.15 + 0.62], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA007fl)
  |> angledLine(angle = segAng(rectangleSegmentA007fl) - 90, length = 0.375, tag = $rectangleSegmentB007fl)
  |> angledLine(angle = segAng(rectangleSegmentA007fl), length = -segLen(rectangleSegmentA007fl), tag = $rectangleSegmentC007fl)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude008fl = extrude(sketch008fl, length = -thickness)

// EIA-310-D standard hole pattern
const sketch009fl = startSketchOn(extrude001fl, face = 'START')
  |> startProfileAt([
       -1.45 - originStart[0],
       originStart[2] + 0.15 + 0.62 + 0.5
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA008fl)
  |> angledLine(angle = segAng(rectangleSegmentA008fl) - 90, length = 0.375, tag = $rectangleSegmentB008fl)
  |> angledLine(angle = segAng(rectangleSegmentA008fl), length = -segLen(rectangleSegmentA008fl), tag = $rectangleSegmentC008fl)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude009fl = extrude(sketch009fl, length = -thickness)

// define slots
const sketch010fl = startSketchOn(extrude001fl, face = 'START')
  |> startProfileAt([
       -1.12 + (.75 - .438) / 2 - originStart[0],
       originStart[2] + .81 - (.438 / 2)
     ], %)
  |> xLine(length = 0.75 - .438)
  |> tangentialArc(endAbsolute = [-0.66 - originStart[0],originStart[2] +  .81 + .438 / 2])
  |> xLine(length = -0.75 + .438)
  |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = 2,
       distance = 1.22
     )
const extrude010fl = extrude(sketch010fl, length = -thickness)

// define slots
const sketch011fl = startSketchOn(extrude001fl, face = 'START')
  |> startProfileAt([
       -1.12 + (.75 - .438) / 2 - originStart[0],
      originStart[2] + railHeight * 1.75 / 2 + .438 / 2
     ], %)
  |> xLine(length = 0.75 - .438)
  |> tangentialArc(endAbsolute = [
       -0.66 - originStart[0],
       originStart[2] + railHeight * 1.75 / 2 - (.438 / 2)
     ])
  |> xLine(length = -0.75 + .438)
  |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()

const extrude011fl = extrude(sketch011fl, length = -thickness)

// define slots
const sketch012fl = startSketchOn(extrude001fl, face = 'START')
  |> startProfileAt([
       -1.12 + (.75 - .438) / 2 - originStart[0], originStart[2] +
       railHeight * 1.75 - .81 + .438 / 2
     ], %)
  |> xLine(length = 0.75 - .438)
  |> tangentialArc(endAbsolute = [
       -0.66 - originStart[0], originStart[2]+
       railHeight * 1.75 - .81 - (.438 / 2)
     ])
  |> xLine(length = -0.75 + .438)
  |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, -1],
       instances = 2,
       distance = 1.22
     )
const extrude012fl = extrude(sketch012fl, length = -thickness)

// FRONT RIGHT VERTICAL RAIL
// Define planes so the rail can be moved
const planeXYfr = {
    origin: [0, 0, originStart[2]],
    xAxis: [1.0, 0.0, 0.0],
    yAxis: [0.0, 1.0, 0.0],
    zAxis: [0.0, 0.0, 1.0]
}

const planeXZfr = {
    origin: [
      originStart[1] + width - thickness - 2,
      originStart[0],
      originStart[2]
    ],
    xAxis: [0, 1, 0],
    yAxis: [0, 0, 1],
    zAxis: [1, 0, 0]
}

const planeYZfr = {
    origin: [
      originStart[1] + width - 2,
      originStart[0],
      originStart[2]
    ],
    xAxis: [-1, 0, 0],
    yAxis: [0, 0, 1],
    zAxis: [1, 0, 0]
}

// Base flange
const sketch001fr = startSketchOn(planeXZfr)
  |> startProfileAt([bendRad + thickness, 0], %)
  |> angledLine(angle = 0, length = 2 - bendRad - thickness, tag = $rectangleSegmentA001fr)
  |> angledLine(angle = segAng(rectangleSegmentA001fr) + 90, length = railHeight * 1.75, tag = $rectangleSegmentB001fr)
  |> angledLine(angle = segAng(rectangleSegmentA001fr), length = -segLen(rectangleSegmentA001fr), tag = $rectangleSegmentC001fr)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude001fr = extrude(sketch001fr, length = thickness)

// First flange
const sketch002fr = startSketchOn(planeYZfr)
  |> startProfileAt([0.89, 0], %)
  |> angledLine(angle = 180, length = 0.89 - bendRad - thickness, tag = $rectangleSegmentA002fr)
  |> angledLine(angle = segAng(rectangleSegmentA002fr) - 90, length = railHeight * 1.75, tag = $rectangleSegmentB002fr)
  |> angledLine(angle = segAng(rectangleSegmentA002fr), length = -segLen(rectangleSegmentA002fr), tag = $rectangleSegmentC002fr)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()

const extrude002fr = extrude(sketch002fr, length = thickness)

// Bend
const sketch003fr = startSketchOn(planeXYfr)
  |> startProfileAt([
       bendRad + originStart[1] + width - 2 - thickness - bendRad,
       originStart[0] + bendRad + thickness
     ], %)
  |> arc(angleStart = 0, angleEnd = -90, radius = bendRad)
  |> yLine(length = -thickness)
  |> arc(angleStart = -90, angleEnd = 0, radius = bendRad + thickness)
  |> close()

const extrude003fr = extrude(sketch003fr, length = railHeight * 1.75)

// EIA-310-D standard hole pattern
const sketch004fr = startSketchOn(extrude002fr, face = 'START')
  |> startProfileAt([
       -0.35 + originStart[1] + width - 2,
       originStart[2] + 0.15
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA003fr)
  |> angledLine(angle = segAng(rectangleSegmentA003fr) - 90, length = 0.375, tag = $rectangleSegmentB003fr)
  |> angledLine(angle = segAng(rectangleSegmentA003fr), length = -segLen(rectangleSegmentA003fr), tag = $rectangleSegmentC003fr)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude004fr = extrude(sketch004fr, length = -thickness)

// EIA-310-D standard hole pattern
const sketch005fr = startSketchOn(extrude002fr, face = 'START')
  |> startProfileAt([
       -0.35 + originStart[1] + width - 2,
       originStart[2] + 0.15 + .62
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA004fr)
  |> angledLine(angle = segAng(rectangleSegmentA004fr) - 90, length = 0.375, tag = $rectangleSegmentB004fr)
  |> angledLine(angle = segAng(rectangleSegmentA004fr), length = -segLen(rectangleSegmentA004fr), tag = $rectangleSegmentC004fr)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude005fr = extrude(sketch005fr, length = -thickness)

// EIA-310-D standard hole pattern
const sketch006fr = startSketchOn(extrude002fr, face = 'START')
  |> startProfileAt([
       -0.35 + originStart[1] + width - 2,
       originStart[2] + 0.15 + 0.62 + 0.50
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA005fr)
  |> angledLine(angle = segAng(rectangleSegmentA005fr) - 90, length = 0.375, tag = $rectangleSegmentB005fr)
  |> angledLine(angle = segAng(rectangleSegmentA005fr), length = -segLen(rectangleSegmentA005fr), tag = $rectangleSegmentC005fr)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude006fr = extrude(sketch006fr, length = -thickness)

// EIA-310-D standard hole pattern
const sketch007fr = startSketchOn(extrude001fr, face = 'START')
  |> startProfileAt([
       -1.45 - originStart[0],
       originStart[2] + 0.15
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA006fr)
  |> angledLine(angle = segAng(rectangleSegmentA006fr) - 90, length = 0.375, tag = $rectangleSegmentB006fr)
  |> angledLine(angle = segAng(rectangleSegmentA006fr), length = -segLen(rectangleSegmentA006fr), tag = $rectangleSegmentC006fr)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude007fr = extrude(sketch007fr, length = -thickness)

// EIA-310-D standard hole pattern
const sketch008fr = startSketchOn(extrude001fr, face = 'START')
  |> startProfileAt([
       -1.45 - originStart[0],
       originStart[2] + 0.15 + 0.62
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA007fr)
  |> angledLine(angle = segAng(rectangleSegmentA007fr) - 90, length = 0.375, tag = $rectangleSegmentB007fr)
  |> angledLine(angle = segAng(rectangleSegmentA007fr), length = -segLen(rectangleSegmentA007fr), tag = $rectangleSegmentC007fr)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude008fr = extrude(sketch008fr, length = -thickness)

// EIA-310-D standard hole pattern
const sketch009fr = startSketchOn(extrude001fr, face = 'START')
  |> startProfileAt([
       -1.45 - originStart[0],
       originStart[2] + 0.15 + 0.62 + 0.5
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA008fr)
  |> angledLine(angle = segAng(rectangleSegmentA008fr) - 90, length = 0.375, tag = $rectangleSegmentB008fr)
  |> angledLine(angle = segAng(rectangleSegmentA008fr), length = -segLen(rectangleSegmentA008fr), tag = $rectangleSegmentC008fr)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude009fr = extrude(sketch009fr, length = -thickness)

// define slots
const sketch010fr = startSketchOn(extrude001fr, face = 'START')
  |> startProfileAt([
       -1.12 + (.75 - .438) / 2 - originStart[0],
       originStart[2] + .81 - (.438 / 2)
     ], %)
  |> xLine(length = 0.75 - .438)
  |> tangentialArc(endAbsolute = [
       -0.66 - originStart[0],
       originStart[2] + .81 + .438 / 2
     ])
  |> xLine(length = -0.75 + .438)
  |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = 2,
       distance = 1.22
     )
const extrude010fr = extrude(sketch010fr, length = -thickness)

// define slots
const sketch011fr = startSketchOn(extrude001fr, face = 'START')
  |> startProfileAt([
       -1.12 + (.75 - .438) / 2 - originStart[0],
       originStart[2] + railHeight * 1.75 / 2 + .438 / 2
     ], %)
  |> xLine(length = 0.75 - .438)
  |> tangentialArc(endAbsolute = [
       -0.66 - originStart[0],
       originStart[2] + railHeight * 1.75 / 2 - (.438 / 2)
     ])
  |> xLine(length = -0.75 + .438)
  |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()

const extrude011fr = extrude(sketch011fr, length = -thickness)

// define slots
const sketch012fr = startSketchOn(extrude001fr, face = 'START')
  |> startProfileAt([
       -1.12 + (.75 - .438) / 2 - originStart[0],
       originStart[2] + railHeight * 1.75 - .81 + .438 / 2
     ], %)
  |> xLine(length = 0.75 - .438)
  |> tangentialArc(endAbsolute = [
       -0.66 - originStart[0],
       originStart[2] + railHeight * 1.75 - .81 - (.438 / 2)
     ])
  |> xLine(length = -0.75 + .438)
  |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, -1],
       instances = 2,
       distance = 1.22
     )
const extrude012fr = extrude(sketch012fr, length = -thickness)

// RIGHT REAR VERTICAL RAIL
// Define planes so the rail can be moved
const planeXYrr = {
    origin: [0, serverDepth, originStart[2]],
    xAxis: [1.0, 0.0, 0.0],
    yAxis: [0.0, 1.0, 0.0],
    zAxis: [0.0, 0.0, 1.0]
}

const planeXZrr = {
    origin: [
      originStart[1] + width - thickness - 2,
      originStart[0]+serverDepth-2-bendRad,
      originStart[2]
    ],
    xAxis: [0, 1, 0],
    yAxis: [0, 0, 1],
    zAxis: [1, 0, 0]
}

const planeYZrr = {
    origin: [
      originStart[1] + width - 2,
      originStart[0]+serverDepth,
      originStart[2]
    ],
    xAxis: [-1, 0, 0],
    yAxis: [0, 0, 1],
    zAxis: [1, 0, 0]
}

// Base flange
const sketch001rr = startSketchOn(planeXZrr)
  |> startProfileAt([bendRad + thickness, 0], %)
  |> angledLine(angle = 0, length = 2 - bendRad - thickness, tag = $rectangleSegmentA001rr)
  |> angledLine(angle = segAng(rectangleSegmentA001rr) + 90, length = railHeight * 1.75, tag = $rectangleSegmentB001rr)
  |> angledLine(angle = segAng(rectangleSegmentA001rr), length = -segLen(rectangleSegmentA001rr), tag = $rectangleSegmentC001rr)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude001rr = extrude(sketch001rr, length = thickness)

// First flange
const sketch002rr = startSketchOn(planeYZrr)
  |> startProfileAt([0.89, 0], %)
  |> angledLine(angle = 180, length = 0.89 - bendRad - thickness, tag = $rectangleSegmentA002rr)
  |> angledLine(angle = segAng(rectangleSegmentA002rr) - 90, length = railHeight * 1.75, tag = $rectangleSegmentB002rr)
  |> angledLine(angle = segAng(rectangleSegmentA002rr), length = -segLen(rectangleSegmentA002rr), tag = $rectangleSegmentC002rr)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()

const extrude002rr = extrude(sketch002rr, length = thickness)

// Bend
const sketch003rr = startSketchOn(planeXYrr)
  |> startProfileAt([
       bendRad + originStart[1] + width - 2-bendRad,
       originStart[0]-bendRad
     ], %)
  |> arc(angleStart = 0, angleEnd = 90, radius = bendRad+thickness)
  |> yLine(length = -thickness)
    |> arc(angleStart = 90, angleEnd = 0, radius = bendRad)
  |> close()

const extrude003rr = extrude(sketch003rr, length = railHeight * 1.75)

// EIA-310-D standard hole pattern
const sketch004rr = startSketchOn(extrude002rr, face = 'START')
  |> startProfileAt([
       -0.35 + originStart[1] + width - 2,
       originStart[2] + 0.15
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA003rr)
  |> angledLine(angle = segAng(rectangleSegmentA003rr) - 90, length = 0.375, tag = $rectangleSegmentB003rr)
  |> angledLine(angle = segAng(rectangleSegmentA003rr), length = -segLen(rectangleSegmentA003rr), tag = $rectangleSegmentC003rr)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude004rr = extrude(sketch004rr, length = -thickness)

// EIA-310-D standard hole pattern
const sketch005rr = startSketchOn(extrude002rr, face = 'START')
  |> startProfileAt([
       -0.35 + originStart[1] + width - 2,
       originStart[2] + 0.15 + .62
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA004rr)
  |> angledLine(angle = segAng(rectangleSegmentA004rr) - 90, length = 0.375, tag = $rectangleSegmentB004rr)
  |> angledLine(angle = segAng(rectangleSegmentA004rr), length = -segLen(rectangleSegmentA004rr), tag = $rectangleSegmentC004rr)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude005rr = extrude(sketch005rr, length = -thickness)

// EIA-310-D standard hole pattern
const sketch006rr = startSketchOn(extrude002rr, face = 'START')
  |> startProfileAt([
       -0.35 + originStart[1] + width - 2,
       originStart[2] + 0.15 + 0.62 + 0.50
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA005rr)
  |> angledLine(angle = segAng(rectangleSegmentA005rr) - 90, length = 0.375, tag = $rectangleSegmentB005rr)
  |> angledLine(angle = segAng(rectangleSegmentA005rr), length = -segLen(rectangleSegmentA005rr), tag = $rectangleSegmentC005rr)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude006rr = extrude(sketch006rr, length = -thickness)

// EIA-310-D standard hole pattern
const sketch007rr = startSketchOn(extrude001rr, face = 'START')
  |> startProfileAt([
       -originStart[0]-serverDepth+1.7,
       originStart[2] + 0.15
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA006rr)
  |> angledLine(angle = segAng(rectangleSegmentA006rr) - 90, length = 0.375, tag = $rectangleSegmentB006rr)
  |> angledLine(angle = segAng(rectangleSegmentA006rr), length = -segLen(rectangleSegmentA006rr), tag = $rectangleSegmentC006rr)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude007rr = extrude(sketch007rr, length = -thickness)

// EIA-310-D standard hole pattern
const sketch008rr = startSketchOn(extrude001rr, face = 'START')
  |> startProfileAt([
       -originStart[0]-serverDepth+1.7,
       originStart[2] + 0.15 + 0.62
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA007rr)
  |> angledLine(angle = segAng(rectangleSegmentA007rr) - 90, length = 0.375, tag = $rectangleSegmentB007rr)
  |> angledLine(angle = segAng(rectangleSegmentA007rr), length = -segLen(rectangleSegmentA007rr), tag = $rectangleSegmentC007rr)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude008rr = extrude(sketch008rr, length = -thickness)

// EIA-310-D standard hole pattern
const sketch009rr = startSketchOn(extrude001rr, face = 'START')
  |> startProfileAt([
       -originStart[0]-serverDepth+1.7,
       originStart[2] + 0.15 + 0.62 + 0.5
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA008rr)
  |> angledLine(angle = segAng(rectangleSegmentA008rr) - 90, length = 0.375, tag = $rectangleSegmentB008rr)
  |> angledLine(angle = segAng(rectangleSegmentA008rr), length = -segLen(rectangleSegmentA008rr), tag = $rectangleSegmentC008rr)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude009rr = extrude(sketch009rr, length = -thickness)

// define slots
const sketch010rr = startSketchOn(extrude001rr, face = 'START')
  |> startProfileAt([
       -1.12 + (.75 - .438) / 2 - originStart[0]+1.5-serverDepth,
       originStart[2] + .81 - (.438 / 2)
     ], %)
  |> xLine(length = 0.75 - .438)
  |> tangentialArc(endAbsolute = [
       -0.66 - originStart[0]+1.5-serverDepth,
       originStart[2] + .81 + .438 / 2
     ])
  |> xLine(length = -0.75 + .438)
  |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = 2,
       distance = 1.22
     )
const extrude010rr = extrude(sketch010rr, length = -thickness)

// define slots
const sketch011rr = startSketchOn(extrude001rr, face = 'START')
  |> startProfileAt([
       -1.12 + (.75 - .438) / 2 - originStart[0]+1.5-serverDepth,
       originStart[2] + railHeight * 1.75 / 2 + .438 / 2
     ], %)
  |> xLine(length = 0.75 - .438)
  |> tangentialArc(endAbsolute = [
       -0.66 - originStart[0]+1.5-serverDepth,
       originStart[2] + railHeight * 1.75 / 2 - (.438 / 2)
     ])
  |> xLine(length = -0.75 + .438)
  |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()

const extrude011rr = extrude(sketch011rr, length = -thickness)

// define slots
const sketch012rr = startSketchOn(extrude001rr, face = 'START')
  |> startProfileAt([
       -1.12 + (.75 - .438) / 2 - originStart[0]+1.5-serverDepth,
       originStart[2] + railHeight * 1.75 - .81 + .438 / 2
     ], %)
  |> xLine(length = 0.75 - .438)
  |> tangentialArc(endAbsolute = [
       -0.66 - originStart[0]+1.5-serverDepth,
       originStart[2] + railHeight * 1.75 - .81 - (.438 / 2)
     ])
  |> xLine(length = -0.75 + .438)
  |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, -1],
       instances = 2,
       distance = 1.22
     )
const extrude012rr = extrude(sketch012rr, length = -thickness)

// REAR LEFT VETCIAL RAIL
// Define planes so the rail can be moved
const planeXYrl = {
    origin: [0, serverDepth, originStart[2]],
    xAxis: [1.0, 0.0, 0.0],
    yAxis: [0.0, 1.0, 0.0],
    zAxis: [0.0, 0.0, 1.0]
}

const planeXZrl = {
    origin: [
      originStart[1],
      originStart[0] + serverDepth - 2 - bendRad,
      originStart[2]
    ],
    xAxis: [0, 1, 0],
    yAxis: [0, 0, 1],
    zAxis: [1, 0, 0]
}

const planeYZrl = {
    origin: [
      originStart[1],
      originStart[0] + serverDepth,
      originStart[2]
    ],
    xAxis: [-1, 0, 0],
    yAxis: [0, 0, 1],
    zAxis: [1, 0, 0]
}
// Base flange
const sketch001rl = startSketchOn(planeXZrl)
  |> startProfileAt([bendRad + thickness, 0], %)
  |> angledLine(angle = 0, length = 2 - bendRad - thickness, tag = $rectangleSegmentA001rl)
  |> angledLine(angle = segAng(rectangleSegmentA001rl) + 90, length = railHeight * 1.75, tag = $rectangleSegmentB001rl)
  |> angledLine(angle = segAng(rectangleSegmentA001rl), length = -segLen(rectangleSegmentA001rl), tag = $rectangleSegmentC001rl)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
const extrude001rl = extrude(sketch001rl, length = thickness)

// First flange
const sketch002rl = startSketchOn(planeYZrl)
  |> startProfileAt([-bendRad - thickness, 0], %)
  |> angledLine(angle = 180, length = 0.89 - bendRad - thickness, tag = $rectangleSegmentA002rl)
  |> angledLine(angle = segAng(rectangleSegmentA002rl) - 90, length = railHeight * 1.75, tag = $rectangleSegmentB002rl)
  |> angledLine(angle = segAng(rectangleSegmentA002rl), length = -segLen(rectangleSegmentA002rl), tag = $rectangleSegmentC002rl)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()

const extrude002rl = extrude(sketch002rl, length = thickness)

// Bend
const sketch003rl = startSketchOn(planeXYrl)
  |> startProfileAt([
       bendRad + originStart[1] + thickness,
       originStart[0]
     ], %)
  |> arc(angleStart = 90, angleEnd = 180, radius = bendRad)
  |> xLine(length = -thickness)
  |> arc(angleStart = 180, angleEnd = 90, radius = bendRad + thickness)
  |> close()

const extrude003rl = extrude(sketch003rl, length = railHeight * 1.75)

// EIA-310-D standard hole pattern
const sketch004rl = startSketchOn(extrude002rl, face = 'START')
  |> startProfileAt([
       -1.38 + 2 + thickness + originStart[1],
       originStart[2] + 0.15
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA003rl)
  |> angledLine(angle = segAng(rectangleSegmentA003rl) - 90, length = 0.375, tag = $rectangleSegmentB003rl)
  |> angledLine(angle = segAng(rectangleSegmentA003rl), length = -segLen(rectangleSegmentA003rl), tag = $rectangleSegmentC003rl)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude004rl = extrude(sketch004rl, length = -thickness)

// EIA-310-D standard hole pattern
const sketch005rl = startSketchOn(extrude002rl, face = 'START')
  |> startProfileAt([
       -1.38 + 2 + thickness + originStart[1],
       originStart[2] + 0.15 + .62
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA004rl)
  |> angledLine(angle = segAng(rectangleSegmentA004rl) - 90, length = 0.375, tag = $rectangleSegmentB004rl)
  |> angledLine(angle = segAng(rectangleSegmentA004rl), length = -segLen(rectangleSegmentA004rl), tag = $rectangleSegmentC004rl)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     ) 
const extrude005rl = extrude(sketch005rl, length = -thickness)

// EIA-310-D standard hole pattern
const sketch006rl = startSketchOn(extrude002rl, face = 'START')
  |> startProfileAt([
       -1.38 + 2 + thickness + originStart[1],
       originStart[2] + 0.15 + 0.62 + 0.50
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA005rl)
  |> angledLine(angle = segAng(rectangleSegmentA005rl) - 90, length = 0.375, tag = $rectangleSegmentB005rl)
  |> angledLine(angle = segAng(rectangleSegmentA005rl), length = -segLen(rectangleSegmentA005rl), tag = $rectangleSegmentC005rl)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude006rl = extrude(sketch006rl, length = -thickness)

// EIA-310-D standard hole pattern
const sketch007rl = startSketchOn(extrude001rl, face = 'START')
  |> startProfileAt([
       1.75 - originStart[0] - serverDepth,
       originStart[2] + 0.15
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA006rl)
  |> angledLine(angle = segAng(rectangleSegmentA006rl) - 90, length = 0.375, tag = $rectangleSegmentB006rl)
  |> angledLine(angle = segAng(rectangleSegmentA006rl), length = -segLen(rectangleSegmentA006rl), tag = $rectangleSegmentC006rl)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude007rl = extrude(sketch007rl, length = -thickness)

// EIA-310-D standard hole pattern
const sketch008rl = startSketchOn(extrude001rl, face = 'START')
  |> startProfileAt([
       1.75 - originStart[0] - serverDepth,
       originStart[2] + 0.15 + 0.62
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA007rl)
  |> angledLine(angle = segAng(rectangleSegmentA007rl) - 90, length = 0.375, tag = $rectangleSegmentB007rl)
  |> angledLine(angle = segAng(rectangleSegmentA007rl), length = -segLen(rectangleSegmentA007rl), tag = $rectangleSegmentC007rl)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude008rl = extrude(sketch008rl, length = -thickness)

// EIA-310-D standard hole pattern
const sketch009rl = startSketchOn(extrude001rl, face = 'START')
  |> startProfileAt([
       1.75 - originStart[0] - serverDepth,
       originStart[2] + 0.15 + 0.62 + 0.5
     ], %)
  |> angledLine(angle = 0, length = -0.375, tag = $rectangleSegmentA008rl)
  |> angledLine(angle = segAng(rectangleSegmentA008rl) - 90, length = 0.375, tag = $rectangleSegmentB008rl)
  |> angledLine(angle = segAng(rectangleSegmentA008rl), length = -segLen(rectangleSegmentA008rl), tag = $rectangleSegmentC008rl)
  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = railHeight,
       distance = 0.62 + 0.62 + 0.5
     )
const extrude009rl = extrude(sketch009rl, length = -thickness)

// define slots
const sketch010rl = startSketchOn(extrude001rl, face = 'START')
  |> startProfileAt([
       -1.12 + (.75 - .438) / 2 - originStart[0] - serverDepth + 1.5,
       originStart[2] + .81 - (.438 / 2)
     ], %)
  |> xLine(length = 0.75 - .438)
  |> tangentialArc(endAbsolute = [
       -0.66 - originStart[0] - serverDepth + 1.5,
       originStart[2] + .81 + .438 / 2
     ])
  |> xLine(length = -0.75 + .438)
  |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, 1],
       instances = 2,
       distance = 1.22
     )
const extrude010rl = extrude(sketch010rl, length = -thickness)

// define slots
const sketch011rl = startSketchOn(extrude001rl, face = 'START')
  |> startProfileAt([
       -1.12 + (.75 - .438) / 2 - originStart[0] - serverDepth + 1.5,
       originStart[2] + railHeight * 1.75 / 2 + .438 / 2
     ], %)
  |> xLine(length = 0.75 - .438)
  |> tangentialArc(endAbsolute = [
       -0.66 - originStart[0] - serverDepth + 1.5,
       originStart[2] + railHeight * 1.75 / 2 - (.438 / 2)
     ])
  |> xLine(length = -0.75 + .438)
  |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()

const extrude011rl = extrude(sketch011rl, length = -thickness)

// define slots
const sketch012rl = startSketchOn(extrude001rl, face = 'START')
  |> startProfileAt([
       -1.12 + (.75 - .438) / 2 - originStart[0] - serverDepth + 1.5,
       originStart[2] + railHeight * 1.75 - .81 + .438 / 2
     ], %)
  |> xLine(length = 0.75 - .438)
  |> tangentialArc(endAbsolute = [
       -0.66 - originStart[0] - serverDepth + 1.5,
       originStart[2] + railHeight * 1.75 - .81 - (.438 / 2)
     ])
  |> xLine(length = -0.75 + .438)
  |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
  |> close()
  |> patternLinear2d(
       axis = [0, -1],
       instances = 2,
       distance = 1.22
     )
const extrude012rl = extrude(sketch012rl, length = -thickness)

// GENERATE SERVER MODELS
// Define planes so the server can be moved
fn streamServer = (serverPos) => {
  const planeXYs = {
      origin: [0, 0 + 2, 4.114 + 1 + serverPos * 1.75],
      xAxis: [1.0, 0.0, 0.0],
      yAxis: [0.0, 1.0, 0.0],
      zAxis: [0.0, 0.0, 1.0]
  }

  const planeXZs = {
      origin: [0 + 1.2 + .1, 0 + 2, 0],
      xAxis: [0, -1, 0],
      yAxis: [0, 0, 1],
      zAxis: [1, 0, 0]
  }
  const planeXZs2 = {
      origin: [18 + 1.4, 0 + 2, 0],
      xAxis: [0, -1, 0],
      yAxis: [0, 0, 1],
      zAxis: [1, 0, 0]
  }

  const sketch001s = startSketchOn(planeXYs)
    |> startProfileAt([1 + 1.2, 1], %)
    |> angledLine(angle = 0, length = 17.2, tag = $rectangleSegmentA001)
    |> angledLine(angle = segAng(rectangleSegmentA001) + 90, length = 29, tag = $rectangleSegmentB001)
    |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
    |> close()
  const extrude001s = extrude(sketch001s, length = 7)

  const sketch002s = startSketchOn(planeXZs)
    |> startProfileAt([-1, 4.114 + 1 + serverPos * 1.75], %)
    |> yLine(length = 6.98)
    |> xLine(length = 0.2)
    |> yLine(length = -0.36)
    |> xLine(length = 0.5)
    |> tangentialArc(endAbsolute = [
         0.3,
         17.15 + 4.114 + 1 + serverPos * 1.75 - 11.114
       ])
    |> yLine(length = -1.77)
    |> tangentialArc(endAbsolute = [
         -0.13,
         14.89 + 4.114 + 1 + serverPos * 1.75 - 11.114
       ])
    |> xLine(length = -0.52)
    |> yLine(length = -0.42)
    |> line(end = [0.34, -0.15])
    |> yLine(length = -2.97)
    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
    |> close()

  const extrude002s = extrude(sketch002s, length = 1.8 / 2)

  const sketch003s = startSketchOn(planeXZs2)
    |> startProfileAt([-1, 4.114 + 1 + serverPos * 1.75], %)
    |> yLine(length = 6.98)
    |> xLine(length = 0.2)
    |> yLine(length = -0.36)
    |> xLine(length = 0.5)
    |> tangentialArc(endAbsolute = [
         0.3,
         17.15 + 4.114 + 1 + serverPos * 1.75 - 11.114
       ])
    |> yLine(length = -1.77)
    |> tangentialArc(endAbsolute = [
         -0.13,
         14.89 + 4.114 + 1 + serverPos * 1.75 - 11.114
       ])
    |> xLine(length = -0.52)
    |> yLine(length = -0.42)
    |> line(end = [0.34, -0.15])
    |> yLine(length = -2.97)
    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
    |> close()

  const extrude003s = extrude(sketch003s, length = 1.8 / 2)
  return extrude003s
}

// generate servers at Z height in U's
// streamServer(4)
// streamServer(8)
// streamServer(12)
// streamServer(16)
// streamServer(20)


// streamServer(29)
// streamServer(33)
// streamServer(37)