change up docs format (#1711)

* change up docs format

Signed-off-by: Jess Frazelle <github@jessfraz.com>

* change up docs format

Signed-off-by: Jess Frazelle <github@jessfraz.com>

* change up docs format

Signed-off-by: Jess Frazelle <github@jessfraz.com>

* fix

Signed-off-by: Jess Frazelle <github@jessfraz.com>

* workflow to push docs

Signed-off-by: Jess Frazelle <github@jessfraz.com>

* fix[

Signed-off-by: Jess Frazelle <github@jessfraz.com>

* initial commit

Signed-off-by: Jess Frazelle <github@jessfraz.com>

* fix

Signed-off-by: Jess Frazelle <github@jessfraz.com>

* initial commit

Signed-off-by: Jess Frazelle <github@jessfraz.com>

* initial commit

Signed-off-by: Jess Frazelle <github@jessfraz.com>

* fixes

Signed-off-by: Jess Frazelle <github@jessfraz.com>

* updates

Signed-off-by: Jess Frazelle <github@jessfraz.com>

---------

Signed-off-by: Jess Frazelle <github@jessfraz.com>

docs/kcl/KNOWN-ISSUES.md

@@ -1,4 +1,8 @@
-# Known Issues
+---
+title: "KCL Known Issues"
+excerpt: "Known issues with the KCL standard library for the Zoo Modeling App."
+layout: manual
+---
 
 The following are bugs that are not in modeling-app or kcl itself. These bugs
 once fixed in engine will just start working here with no language changes.

docs/kcl/abs.md

@@ -0,0 +1,30 @@
+---
+title: "abs"
+excerpt: "Computes the absolute value of a number."
+layout: manual
+---
+
+Computes the absolute value of a number.
+
+
+
+```
+abs(num: number) -> number
+```
+
+### Examples
+
+```kcl
+const myVar = abs(-4)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/acos.md

@@ -0,0 +1,30 @@
+---
+title: "acos"
+excerpt: "Computes the arccosine of a number (in radians)."
+layout: manual
+---
+
+Computes the arccosine of a number (in radians).
+
+
+
+```
+acos(num: number) -> number
+```
+
+### Examples
+
+```kcl
+const myVar = acos(0.5)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/angleToMatchLengthX.md

@@ -0,0 +1,202 @@
+---
+title: "angleToMatchLengthX"
+excerpt: "Returns the angle to match the given length for x."
+layout: manual
+---
+
+Returns the angle to match the given length for x.
+
+
+
+```
+angleToMatchLengthX(segment_name: string, to: number, sketch_group: SketchGroup) -> number
+```
+
+### Examples
+
+```kcl
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> line({ to: [1, 3.82], tag: 'seg01' }, %)
+  |> angledLineToX([
+       -angleToMatchLengthX('seg01', 10, %),
+       5
+     ], %)
+  |> close(%)
+```
+
+### Arguments
+
+* `segment_name`: `string` (REQUIRED)
+* `to`: `number` (REQUIRED)
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`number`
+
+
+

docs/kcl/angleToMatchLengthY.md

@@ -0,0 +1,202 @@
+---
+title: "angleToMatchLengthY"
+excerpt: "Returns the angle to match the given length for y."
+layout: manual
+---
+
+Returns the angle to match the given length for y.
+
+
+
+```
+angleToMatchLengthY(segment_name: string, to: number, sketch_group: SketchGroup) -> number
+```
+
+### Examples
+
+```kcl
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> line({ to: [1, 3.82], tag: 'seg01' }, %)
+  |> angledLineToX([
+       -angleToMatchLengthY('seg01', 10, %),
+       5
+     ], %)
+  |> close(%)
+```
+
+### Arguments
+
+* `segment_name`: `string` (REQUIRED)
+* `to`: `number` (REQUIRED)
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`number`
+
+
+

docs/kcl/angledLine.md

@@ -0,0 +1,374 @@
+---
+title: "angledLine"
+excerpt: "Draw an angled line."
+layout: manual
+---
+
+Draw an angled line.
+
+
+
+```
+angledLine(data: AngledLineData, sketch_group: SketchGroup) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> angledLine({ angle: 45, length: 10, tag: "edge1" }, %)
+  |> line([10, 10], %)
+  |> line([0, 10], %)
+  |> close(%, "edge2")
+  |> extrude(10, %)
+```
+
+### Arguments
+
+* `data`: `AngledLineData` - Data to draw an angled line. (REQUIRED)
+```
+{
+	// The angle of the line.
+	angle: number,
+	// The length of the line.
+	length: number,
+	// The tag.
+	tag: string,
+} |
+[number, number]
+```
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/angledLineOfXLength.md

@@ -0,0 +1,374 @@
+---
+title: "angledLineOfXLength"
+excerpt: "Draw an angled line of a given x length."
+layout: manual
+---
+
+Draw an angled line of a given x length.
+
+
+
+```
+angledLineOfXLength(data: AngledLineData, sketch_group: SketchGroup) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+startSketchOn('XZ')
+  |> startProfileAt([0, 0], %)
+  |> angledLineOfXLength({ angle: 45, length: 10, tag: "edge1" }, %)
+  |> line([10, 10], %)
+  |> line([0, 10], %)
+  |> close(%, "edge2")
+  |> extrude(10, %)
+```
+
+### Arguments
+
+* `data`: `AngledLineData` - Data to draw an angled line. (REQUIRED)
+```
+{
+	// The angle of the line.
+	angle: number,
+	// The length of the line.
+	length: number,
+	// The tag.
+	tag: string,
+} |
+[number, number]
+```
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/angledLineOfYLength.md

@@ -0,0 +1,375 @@
+---
+title: "angledLineOfYLength"
+excerpt: "Draw an angled line of a given y length."
+layout: manual
+---
+
+Draw an angled line of a given y length.
+
+
+
+```
+angledLineOfYLength(data: AngledLineData, sketch_group: SketchGroup) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+startSketchOn('YZ')
+  |> startProfileAt([0, 0], %)
+  |> angledLineOfYLength({ angle: 45, length: 10, tag: "edge1" }, %)
+  |> line([10, 10], %)
+  |> line([0, 10], %)
+  |> close(%, "edge2")
+  |> extrude(10, %)
+  |> fillet({ radius: 2, tags: ["edge1"] }, %)
+```
+
+### Arguments
+
+* `data`: `AngledLineData` - Data to draw an angled line. (REQUIRED)
+```
+{
+	// The angle of the line.
+	angle: number,
+	// The length of the line.
+	length: number,
+	// The tag.
+	tag: string,
+} |
+[number, number]
+```
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/angledLineThatIntersects.md

@@ -0,0 +1,381 @@
+---
+title: "angledLineThatIntersects"
+excerpt: "Draw an angled line that intersects with a given line."
+layout: manual
+---
+
+Draw an angled line that intersects with a given line.
+
+
+
+```
+angledLineThatIntersects(data: AngledLineThatIntersectsData, sketch_group: SketchGroup) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> lineTo({ to: [2, 2], tag: "yo" }, %)
+  |> lineTo([3, 1], %)
+  |> angledLineThatIntersects({
+       angle: 180,
+       intersectTag: 'yo',
+       offset: 12,
+       tag: "yo2"
+     }, %)
+  |> line([4, 0], %)
+  |> close(%, "yo3")
+  |> extrude(10, %)
+```
+
+### Arguments
+
+* `data`: `AngledLineThatIntersectsData` - Data for drawing an angled line that intersects with a given line. (REQUIRED)
+```
+{
+	// The angle of the line.
+	angle: number,
+	// The tag of the line to intersect with.
+	intersectTag: string,
+	// The offset from the intersecting line.
+	offset: number,
+	// The tag.
+	tag: string,
+}
+```
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/angledLineToX.md

@@ -0,0 +1,375 @@
+---
+title: "angledLineToX"
+excerpt: "Draw an angled line to a given x coordinate."
+layout: manual
+---
+
+Draw an angled line to a given x coordinate.
+
+
+
+```
+angledLineToX(data: AngledLineToData, sketch_group: SketchGroup) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> angledLineToX({ angle: 45, to: 10, tag: "edge1" }, %)
+  |> line([10, 10], %)
+  |> line([0, 10], %)
+  |> close(%, "edge2")
+  |> extrude(10, %)
+  |> fillet({ radius: 2, tags: ["edge1"] }, %)
+```
+
+### Arguments
+
+* `data`: `AngledLineToData` - Data to draw an angled line to a point. (REQUIRED)
+```
+{
+	// The angle of the line.
+	angle: number,
+	// The tag.
+	tag: string,
+	// The point to draw to.
+	to: number,
+} |
+[number, number]
+```
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/angledLineToY.md

@@ -0,0 +1,374 @@
+---
+title: "angledLineToY"
+excerpt: "Draw an angled line to a given y coordinate."
+layout: manual
+---
+
+Draw an angled line to a given y coordinate.
+
+
+
+```
+angledLineToY(data: AngledLineToData, sketch_group: SketchGroup) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> angledLineToY({ angle: 45, to: 10, tag: "edge1" }, %)
+  |> line([10, 10], %)
+  |> line([0, 10], %)
+  |> close(%, "edge2")
+  |> extrude(10, %)
+```
+
+### Arguments
+
+* `data`: `AngledLineToData` - Data to draw an angled line to a point. (REQUIRED)
+```
+{
+	// The angle of the line.
+	angle: number,
+	// The tag.
+	tag: string,
+	// The point to draw to.
+	to: number,
+} |
+[number, number]
+```
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/arc.md

@@ -0,0 +1,387 @@
+---
+title: "arc"
+excerpt: "Draw an arc."
+layout: manual
+---
+
+Draw an arc.
+
+
+
+```
+arc(data: ArcData, sketch_group: SketchGroup) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+startSketchOn('-YZ')
+  |> startProfileAt([0, 0], %)
+  |> arc({
+       angle_start: 0,
+       angle_end: 360,
+       radius: 10,
+       tag: "edge1"
+     }, %)
+  |> extrude(10, %)
+```
+
+### Arguments
+
+* `data`: `ArcData` - Data to draw an arc. (REQUIRED)
+```
+{
+	// The end angle.
+	angle_end: number,
+	// The start angle.
+	angle_start: number,
+	// The radius.
+	radius: number,
+	// The tag.
+	tag: string,
+} |
+{
+	// The center.
+	center: [number, number],
+	// The radius.
+	radius: number,
+	// The tag.
+	tag: string,
+	// The to point.
+	to: [number, number],
+}
+```
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/asin.md

@@ -0,0 +1,30 @@
+---
+title: "asin"
+excerpt: "Computes the arcsine of a number (in radians)."
+layout: manual
+---
+
+Computes the arcsine of a number (in radians).
+
+
+
+```
+asin(num: number) -> number
+```
+
+### Examples
+
+```kcl
+const myVar = asin(0.5)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/atan.md

@@ -0,0 +1,30 @@
+---
+title: "atan"
+excerpt: "Computes the arctangent of a number (in radians)."
+layout: manual
+---
+
+Computes the arctangent of a number (in radians).
+
+
+
+```
+atan(num: number) -> number
+```
+
+### Examples
+
+```kcl
+const myVar = atan(1.0)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/bezierCurve.md

@@ -0,0 +1,378 @@
+---
+title: "bezierCurve"
+excerpt: "Draw a bezier curve."
+layout: manual
+---
+
+Draw a bezier curve.
+
+
+
+```
+bezierCurve(data: BezierData, sketch_group: SketchGroup) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> bezierCurve({
+       to: [10, 10],
+       control1: [5, 0],
+       control2: [5, 10],
+       tag: "edge1"
+     }, %)
+  |> close(%)
+  |> extrude(10, %)
+```
+
+### Arguments
+
+* `data`: `BezierData` - Data to draw a bezier curve. (REQUIRED)
+```
+{
+	// The first control point.
+	control1: [number, number],
+	// The second control point.
+	control2: [number, number],
+	// The tag.
+	tag: string,
+	// The to point.
+	to: [number, number],
+}
+```
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/ceil.md

@@ -0,0 +1,30 @@
+---
+title: "ceil"
+excerpt: "Computes the smallest integer greater than or equal to a number."
+layout: manual
+---
+
+Computes the smallest integer greater than or equal to a number.
+
+
+
+```
+ceil(num: number) -> number
+```
+
+### Examples
+
+```kcl
+const myVar = ceil(4.5)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/circle.md

@@ -0,0 +1,250 @@
+---
+title: "circle"
+excerpt: "Sketch a circle on the given plane"
+layout: manual
+---
+
+Sketch a circle on the given plane
+
+
+
+```
+circle(center: [number, number], radius: number, surface: SketchSurface, tag?: String) -> SketchGroup
+```
+
+### Arguments
+
+* `center`: `[number, number]` (REQUIRED)
+* `radius`: `number` (REQUIRED)
+* `surface`: `SketchSurface` - A sketch group type. (REQUIRED)
+```
+{
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+* `tag`: `String` (OPTIONAL)
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/close.md

@@ -0,0 +1,369 @@
+---
+title: "close"
+excerpt: "Close the current sketch."
+layout: manual
+---
+
+Close the current sketch.
+
+
+
+```
+close(sketch_group: SketchGroup, tag?: String) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+startSketchOn('XZ')
+  |> startProfileAt([0, 0], %)
+  |> line([10, 10], %)
+  |> line([10, 0], %)
+  |> close(%)
+```
+
+```kcl
+startSketchOn('YZ')
+  |> startProfileAt([0, 0], %)
+  |> line([10, 10], %)
+  |> line([10, 0], %)
+  |> close(%, "edge1")
+```
+
+### Arguments
+
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+* `tag`: `String` (OPTIONAL)
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/cos.md

@@ -0,0 +1,30 @@
+---
+title: "cos"
+excerpt: "Computes the sine of a number (in radians)."
+layout: manual
+---
+
+Computes the sine of a number (in radians).
+
+
+
+```
+cos(num: number) -> number
+```
+
+### Examples
+
+```kcl
+const anotherVar = cos(2 * pi())
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/e.md

@@ -0,0 +1,29 @@
+---
+title: "e"
+excerpt: "Return the value of Euler’s number `e`."
+layout: manual
+---
+
+Return the value of Euler’s number `e`.
+
+
+
+```
+e() -> number
+```
+
+### Examples
+
+```kcl
+const myVar = e()
+```
+
+### Arguments
+
+
+### Returns
+
+`number`
+
+
+

docs/kcl/extrude.md

@@ -0,0 +1,330 @@
+---
+title: "extrude"
+excerpt: "Extrudes by a given amount."
+layout: manual
+---
+
+Extrudes by a given amount.
+
+
+
+```
+extrude(length: number, sketch_group: SketchGroup) -> ExtrudeGroup
+```
+
+### Examples
+
+```kcl
+startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> line([0, 10], %)
+  |> line([10, 0], %)
+  |> line([0, -10], %)
+  |> close(%)
+  |> extrude(5, %)
+```
+
+### Arguments
+
+* `length`: `number` (REQUIRED)
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`ExtrudeGroup` - An extrude group is a collection of extrude surfaces.
+```
+{
+	// The id of the extrusion end cap
+	endCapId: uuid,
+	// The height of the extrude group.
+	height: number,
+	// The id of the extrude group.
+	id: uuid,
+	// The position of the extrude group.
+	position: [number, number, number],
+	// The rotation of the extrude group.
+	rotation: [number, number, number, number],
+	// The sketch group paths.
+	sketchGroupValues: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The id of the extrusion start cap
+	startCapId: uuid,
+	// The extrude surfaces.
+	value: [{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudePlane",
+} |
+{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudeArc",
+}],
+	// The x-axis of the extrude group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the extrude group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the extrude group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/fillet.md

@@ -0,0 +1,307 @@
+---
+title: "fillet"
+excerpt: "Create fillets on tagged paths."
+layout: manual
+---
+
+Create fillets on tagged paths.
+
+
+
+```
+fillet(data: FilletData, extrude_group: ExtrudeGroup) -> ExtrudeGroup
+```
+
+### Examples
+
+```kcl
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> line({ to: [0, 10], tag: "thing" }, %)
+  |> line([10, 0], %)
+  |> line({ to: [0, -10], tag: "thing2" }, %)
+  |> close(%)
+  |> extrude(10, %)
+  |> fillet({ radius: 2, tags: ["thing", "thing2"] }, %)
+```
+
+### Arguments
+
+* `data`: `FilletData` - Data for fillets. (REQUIRED)
+```
+{
+	// The radius of the fillet.
+	radius: number,
+	// The tags of the paths you want to fillet.
+	tags: [uuid |
+string],
+}
+```
+* `extrude_group`: `ExtrudeGroup` - An extrude group is a collection of extrude surfaces. (REQUIRED)
+```
+{
+	// The id of the extrusion end cap
+	endCapId: uuid,
+	// The height of the extrude group.
+	height: number,
+	// The id of the extrude group.
+	id: uuid,
+	// The position of the extrude group.
+	position: [number, number, number],
+	// The rotation of the extrude group.
+	rotation: [number, number, number, number],
+	// The sketch group paths.
+	sketchGroupValues: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The id of the extrusion start cap
+	startCapId: uuid,
+	// The extrude surfaces.
+	value: [{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudePlane",
+} |
+{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudeArc",
+}],
+	// The x-axis of the extrude group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the extrude group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the extrude group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`ExtrudeGroup` - An extrude group is a collection of extrude surfaces.
+```
+{
+	// The id of the extrusion end cap
+	endCapId: uuid,
+	// The height of the extrude group.
+	height: number,
+	// The id of the extrude group.
+	id: uuid,
+	// The position of the extrude group.
+	position: [number, number, number],
+	// The rotation of the extrude group.
+	rotation: [number, number, number, number],
+	// The sketch group paths.
+	sketchGroupValues: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The id of the extrusion start cap
+	startCapId: uuid,
+	// The extrude surfaces.
+	value: [{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudePlane",
+} |
+{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudeArc",
+}],
+	// The x-axis of the extrude group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the extrude group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the extrude group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/floor.md

@@ -0,0 +1,30 @@
+---
+title: "floor"
+excerpt: "Computes the largest integer less than or equal to a number."
+layout: manual
+---
+
+Computes the largest integer less than or equal to a number.
+
+
+
+```
+floor(num: number) -> number
+```
+
+### Examples
+
+```kcl
+const myVar = floor(4.5)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/getExtrudeWallTransform.md

@@ -0,0 +1,175 @@
+---
+title: "getExtrudeWallTransform"
+excerpt: "Returns the extrude wall transform."
+layout: manual
+---
+
+Returns the extrude wall transform.
+
+
+
+```
+getExtrudeWallTransform(surface_name: string, extrude_group: ExtrudeGroup) -> ExtrudeTransform
+```
+
+### Examples
+
+```kcl
+const box = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> line([0, 10], %)
+  |> line([10, 0], %)
+  |> line({ to: [0, -10], tag: "surface" }, %)
+  |> close(%)
+  |> extrude(5, %)
+
+const transform = getExtrudeWallTransform('surface', box)
+```
+
+### Arguments
+
+* `surface_name`: `string` (REQUIRED)
+* `extrude_group`: `ExtrudeGroup` - An extrude group is a collection of extrude surfaces. (REQUIRED)
+```
+{
+	// The id of the extrusion end cap
+	endCapId: uuid,
+	// The height of the extrude group.
+	height: number,
+	// The id of the extrude group.
+	id: uuid,
+	// The position of the extrude group.
+	position: [number, number, number],
+	// The rotation of the extrude group.
+	rotation: [number, number, number, number],
+	// The sketch group paths.
+	sketchGroupValues: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The id of the extrusion start cap
+	startCapId: uuid,
+	// The extrude surfaces.
+	value: [{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudePlane",
+} |
+{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudeArc",
+}],
+	// The x-axis of the extrude group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the extrude group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the extrude group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`ExtrudeTransform`
+```
+{
+	position: [number, number, number],
+	rotation: [number, number, number, number],
+}
+```
+
+
+

docs/kcl/getNextAdjacentEdge.md

@@ -0,0 +1,171 @@
+---
+title: "getNextAdjacentEdge"
+excerpt: "Get the next adjacent edge to the edge given."
+layout: manual
+---
+
+Get the next adjacent edge to the edge given.
+
+
+
+```
+getNextAdjacentEdge(tag: String, extrude_group: ExtrudeGroup) -> Uuid
+```
+
+### Examples
+
+```kcl
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> line({ to: [0, 10], tag: "thing" }, %)
+  |> line({ to: [10, 0], tag: "thing1" }, %)
+  |> line({ to: [0, -10], tag: "thing2" }, %)
+  |> close(%)
+  |> extrude(10, %)
+  |> fillet({
+       radius: 2,
+       tags: [getNextAdjacentEdge("thing", %)]
+     }, %)
+```
+
+### Arguments
+
+* `tag`: `String` (REQUIRED)
+* `extrude_group`: `ExtrudeGroup` - An extrude group is a collection of extrude surfaces. (REQUIRED)
+```
+{
+	// The id of the extrusion end cap
+	endCapId: uuid,
+	// The height of the extrude group.
+	height: number,
+	// The id of the extrude group.
+	id: uuid,
+	// The position of the extrude group.
+	position: [number, number, number],
+	// The rotation of the extrude group.
+	rotation: [number, number, number, number],
+	// The sketch group paths.
+	sketchGroupValues: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The id of the extrusion start cap
+	startCapId: uuid,
+	// The extrude surfaces.
+	value: [{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudePlane",
+} |
+{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudeArc",
+}],
+	// The x-axis of the extrude group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the extrude group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the extrude group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`Uuid`
+
+
+

docs/kcl/getOppositeEdge.md

@@ -0,0 +1,171 @@
+---
+title: "getOppositeEdge"
+excerpt: "Get the opposite edge to the edge given."
+layout: manual
+---
+
+Get the opposite edge to the edge given.
+
+
+
+```
+getOppositeEdge(tag: String, extrude_group: ExtrudeGroup) -> Uuid
+```
+
+### Examples
+
+```kcl
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> line({ to: [0, 10], tag: "thing" }, %)
+  |> line([10, 0], %)
+  |> line({ to: [0, -10], tag: "thing2" }, %)
+  |> close(%)
+  |> extrude(10, %)
+  |> fillet({
+       radius: 2,
+       tags: ["thing", getOppositeEdge("thing", %)]
+     }, %)
+```
+
+### Arguments
+
+* `tag`: `String` (REQUIRED)
+* `extrude_group`: `ExtrudeGroup` - An extrude group is a collection of extrude surfaces. (REQUIRED)
+```
+{
+	// The id of the extrusion end cap
+	endCapId: uuid,
+	// The height of the extrude group.
+	height: number,
+	// The id of the extrude group.
+	id: uuid,
+	// The position of the extrude group.
+	position: [number, number, number],
+	// The rotation of the extrude group.
+	rotation: [number, number, number, number],
+	// The sketch group paths.
+	sketchGroupValues: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The id of the extrusion start cap
+	startCapId: uuid,
+	// The extrude surfaces.
+	value: [{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudePlane",
+} |
+{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudeArc",
+}],
+	// The x-axis of the extrude group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the extrude group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the extrude group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`Uuid`
+
+
+

docs/kcl/getPreviousAdjacentEdge.md

@@ -0,0 +1,171 @@
+---
+title: "getPreviousAdjacentEdge"
+excerpt: "Get the previous adjacent edge to the edge given."
+layout: manual
+---
+
+Get the previous adjacent edge to the edge given.
+
+
+
+```
+getPreviousAdjacentEdge(tag: String, extrude_group: ExtrudeGroup) -> Uuid
+```
+
+### Examples
+
+```kcl
+const part001 = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> line({ to: [0, 10], tag: "thing" }, %)
+  |> line({ to: [10, 0], tag: "thing1" }, %)
+  |> line({ to: [0, -10], tag: "thing2" }, %)
+  |> close(%)
+  |> extrude(10, %)
+  |> fillet({
+       radius: 2,
+       tags: [getPreviousAdjacentEdge("thing2", %)]
+     }, %)
+```
+
+### Arguments
+
+* `tag`: `String` (REQUIRED)
+* `extrude_group`: `ExtrudeGroup` - An extrude group is a collection of extrude surfaces. (REQUIRED)
+```
+{
+	// The id of the extrusion end cap
+	endCapId: uuid,
+	// The height of the extrude group.
+	height: number,
+	// The id of the extrude group.
+	id: uuid,
+	// The position of the extrude group.
+	position: [number, number, number],
+	// The rotation of the extrude group.
+	rotation: [number, number, number, number],
+	// The sketch group paths.
+	sketchGroupValues: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The id of the extrusion start cap
+	startCapId: uuid,
+	// The extrude surfaces.
+	value: [{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudePlane",
+} |
+{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudeArc",
+}],
+	// The x-axis of the extrude group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the extrude group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the extrude group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`Uuid`
+
+
+

docs/kcl/hole.md

@@ -0,0 +1,532 @@
+---
+title: "hole"
+excerpt: "Use a sketch to cut a hole in another sketch."
+layout: manual
+---
+
+Use a sketch to cut a hole in another sketch.
+
+
+
+```
+hole(hole_sketch_group: SketchGroupSet, sketch_group: SketchGroup) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+const square = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> line([0, 10], %)
+  |> line([10, 0], %)
+  |> line([0, -10], %)
+  |> close(%)
+  |> hole(circle([2, 2], .5, startSketchOn('XY')), %)
+  |> hole(circle([2, 8], .5, startSketchOn('XY')), %)
+  |> extrude(2, %)
+```
+
+### Arguments
+
+* `hole_sketch_group`: `SketchGroupSet` - A sketch group or a group of sketch groups. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	type: "sketchGroup",
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	type: "sketchGroups",
+}
+```
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/import.md

@@ -0,0 +1,136 @@
+---
+title: "import"
+excerpt: "Import a CAD file."
+layout: manual
+---
+
+Import a CAD file.
+
+For formats lacking unit data (STL, OBJ, PLY), the default import unit is millimeters. Otherwise you can specify the unit by passing in the options parameter. If you import a gltf file, we will try to find the bin file and import it as well.
+Import paths are relative to the current project directory. This only works in the desktop app not in browser.
+
+```
+import(file_path: String, options?: ImportFormat) -> ImportedGeometry
+```
+
+### Examples
+
+```kcl
+const model = import("thing.obj")
+```
+
+```kcl
+const model = import("cube.obj", { type: "obj", units: "m" })
+```
+
+```kcl
+const model = import("my_model.gltf")
+```
+
+```kcl
+const model = import("my_model.sldprt")
+```
+
+```kcl
+const model = import("my_model.step")
+```
+
+### Arguments
+
+* `file_path`: `String` (REQUIRED)
+* `options`: `ImportFormat` - Import format specifier (OPTIONAL)
+```
+{
+	type: "fbx",
+} |
+{
+	type: "gltf",
+} |
+{
+	// Co-ordinate system of input data. Defaults to the [KittyCAD co-ordinate system.
+	coords: {
+	// Axis the front face of a model looks along.
+	forward: {
+	// Axis specifier.
+	axis: "y" | "z",
+	// Specifies which direction the axis is pointing.
+	direction: "positive" | "negative",
+},
+	// Axis pointing up and away from a model.
+	up: {
+	// Axis specifier.
+	axis: "y" | "z",
+	// Specifies which direction the axis is pointing.
+	direction: "positive" | "negative",
+},
+},
+	type: "obj",
+	// The units of the input data. This is very important for correct scaling and when calculating physics properties like mass, etc. Defaults to millimeters.
+	units: "cm" | "ft" | "in" | "m" | "mm" | "yd",
+} |
+{
+	// Co-ordinate system of input data. Defaults to the [KittyCAD co-ordinate system.
+	coords: {
+	// Axis the front face of a model looks along.
+	forward: {
+	// Axis specifier.
+	axis: "y" | "z",
+	// Specifies which direction the axis is pointing.
+	direction: "positive" | "negative",
+},
+	// Axis pointing up and away from a model.
+	up: {
+	// Axis specifier.
+	axis: "y" | "z",
+	// Specifies which direction the axis is pointing.
+	direction: "positive" | "negative",
+},
+},
+	type: "ply",
+	// The units of the input data. This is very important for correct scaling and when calculating physics properties like mass, etc. Defaults to millimeters.
+	units: "cm" | "ft" | "in" | "m" | "mm" | "yd",
+} |
+{
+	type: "sldprt",
+} |
+{
+	type: "step",
+} |
+{
+	// Co-ordinate system of input data. Defaults to the [KittyCAD co-ordinate system.
+	coords: {
+	// Axis the front face of a model looks along.
+	forward: {
+	// Axis specifier.
+	axis: "y" | "z",
+	// Specifies which direction the axis is pointing.
+	direction: "positive" | "negative",
+},
+	// Axis pointing up and away from a model.
+	up: {
+	// Axis specifier.
+	axis: "y" | "z",
+	// Specifies which direction the axis is pointing.
+	direction: "positive" | "negative",
+},
+},
+	type: "stl",
+	// The units of the input data. This is very important for correct scaling and when calculating physics properties like mass, etc. Defaults to millimeters.
+	units: "cm" | "ft" | "in" | "m" | "mm" | "yd",
+}
+```
+
+### Returns
+
+`ImportedGeometry` - Data for an imported geometry.
+```
+{
+	// The ID of the imported geometry.
+	id: uuid,
+	// The original file paths.
+	value: [string],
+}
+```
+
+
+

docs/kcl/index.md

@@ -0,0 +1,80 @@
+---
+title: "KCL Standard Library"
+excerpt: "Documentation for the KCL standard library for the Zoo Modeling App."
+layout: manual
+---
+
+# KCL Standard Library
+
+## Types
+
+## Table of Contents
+
+* [Types](types.md)
+* [Known Issues](KNOWN-ISSUES.md)
+* [`abs`](abs.md)
+* [`acos`](acos.md)
+* [`angleToMatchLengthX`](angleToMatchLengthX.md)
+* [`angleToMatchLengthY`](angleToMatchLengthY.md)
+* [`angledLine`](angledLine.md)
+* [`angledLineOfXLength`](angledLineOfXLength.md)
+* [`angledLineOfYLength`](angledLineOfYLength.md)
+* [`angledLineThatIntersects`](angledLineThatIntersects.md)
+* [`angledLineToX`](angledLineToX.md)
+* [`angledLineToY`](angledLineToY.md)
+* [`arc`](arc.md)
+* [`asin`](asin.md)
+* [`atan`](atan.md)
+* [`bezierCurve`](bezierCurve.md)
+* [`ceil`](ceil.md)
+* [`circle`](circle.md)
+* [`close`](close.md)
+* [`cos`](cos.md)
+* [`e`](e.md)
+* [`extrude`](extrude.md)
+* [`fillet`](fillet.md)
+* [`floor`](floor.md)
+* [`getExtrudeWallTransform`](getExtrudeWallTransform.md)
+* [`getNextAdjacentEdge`](getNextAdjacentEdge.md)
+* [`getOppositeEdge`](getOppositeEdge.md)
+* [`getPreviousAdjacentEdge`](getPreviousAdjacentEdge.md)
+* [`hole`](hole.md)
+* [`import`](import.md)
+* [`lastSegX`](lastSegX.md)
+* [`lastSegY`](lastSegY.md)
+* [`legAngX`](legAngX.md)
+* [`legAngY`](legAngY.md)
+* [`legLen`](legLen.md)
+* [`line`](line.md)
+* [`lineTo`](lineTo.md)
+* [`ln`](ln.md)
+* [`log`](log.md)
+* [`log10`](log10.md)
+* [`log2`](log2.md)
+* [`max`](max.md)
+* [`min`](min.md)
+* [`patternCircular2d`](patternCircular2d.md)
+* [`patternCircular3d`](patternCircular3d.md)
+* [`patternLinear2d`](patternLinear2d.md)
+* [`patternLinear3d`](patternLinear3d.md)
+* [`pi`](pi.md)
+* [`pow`](pow.md)
+* [`segAng`](segAng.md)
+* [`segEndX`](segEndX.md)
+* [`segEndY`](segEndY.md)
+* [`segLen`](segLen.md)
+* [`sin`](sin.md)
+* [`sqrt`](sqrt.md)
+* [`startProfileAt`](startProfileAt.md)
+* [`startSketchAt`](startSketchAt.md)
+* [`startSketchOn`](startSketchOn.md)
+* [`tan`](tan.md)
+* [`tangentialArc`](tangentialArc.md)
+* [`tangentialArcTo`](tangentialArcTo.md)
+* [`tau`](tau.md)
+* [`toDegrees`](toDegrees.md)
+* [`toRadians`](toRadians.md)
+* [`xLine`](xLine.md)
+* [`xLineTo`](xLineTo.md)
+* [`yLine`](yLine.md)
+* [`yLineTo`](yLineTo.md)

docs/kcl/lastSegX.md

@@ -0,0 +1,199 @@
+---
+title: "lastSegX"
+excerpt: "Returns the last segment of x."
+layout: manual
+---
+
+Returns the last segment of x.
+
+
+
+```
+lastSegX(sketch_group: SketchGroup) -> number
+```
+
+### Examples
+
+```kcl
+startSketchOn("YZ")
+  |> startProfileAt([0, 0], %)
+  |> line({ to: [5, 0], tag: "thing" }, %)
+  |> line([5, 5], %)
+  |> line([0, lastSegX(%)], %)
+  |> close(%)
+  |> extrude(5, %)
+```
+
+### Arguments
+
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`number`
+
+
+

docs/kcl/lastSegY.md

@@ -0,0 +1,199 @@
+---
+title: "lastSegY"
+excerpt: "Returns the last segment of y."
+layout: manual
+---
+
+Returns the last segment of y.
+
+
+
+```
+lastSegY(sketch_group: SketchGroup) -> number
+```
+
+### Examples
+
+```kcl
+startSketchOn("YZ")
+  |> startProfileAt([0, 0], %)
+  |> line({ to: [5, 0], tag: "thing" }, %)
+  |> line([5, 5], %)
+  |> line([0, lastSegY(%)], %)
+  |> close(%)
+  |> extrude(5, %)
+```
+
+### Arguments
+
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`number`
+
+
+

docs/kcl/legAngX.md

@@ -0,0 +1,31 @@
+---
+title: "legAngX"
+excerpt: "Returns the angle of the given leg for x."
+layout: manual
+---
+
+Returns the angle of the given leg for x.
+
+
+
+```
+legAngX(hypotenuse: number, leg: number) -> number
+```
+
+### Examples
+
+```kcl
+legAngX(5, 3)
+```
+
+### Arguments
+
+* `hypotenuse`: `number` (REQUIRED)
+* `leg`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/legAngY.md

@@ -0,0 +1,31 @@
+---
+title: "legAngY"
+excerpt: "Returns the angle of the given leg for y."
+layout: manual
+---
+
+Returns the angle of the given leg for y.
+
+
+
+```
+legAngY(hypotenuse: number, leg: number) -> number
+```
+
+### Examples
+
+```kcl
+legAngY(5, 3)
+```
+
+### Arguments
+
+* `hypotenuse`: `number` (REQUIRED)
+* `leg`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/legLen.md

@@ -0,0 +1,31 @@
+---
+title: "legLen"
+excerpt: "Returns the length of the given leg."
+layout: manual
+---
+
+Returns the length of the given leg.
+
+
+
+```
+legLen(hypotenuse: number, leg: number) -> number
+```
+
+### Examples
+
+```kcl
+legLen(5, 3)
+```
+
+### Arguments
+
+* `hypotenuse`: `number` (REQUIRED)
+* `leg`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/line.md

@@ -0,0 +1,371 @@
+---
+title: "line"
+excerpt: "Draw a line."
+layout: manual
+---
+
+Draw a line.
+
+
+
+```
+line(data: LineData, sketch_group: SketchGroup) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+startSketchOn('-XY')
+  |> startProfileAt([0, 0], %)
+  |> line([10, 10], %)
+  |> line({ to: [20, 10], tag: "edge1" }, %)
+  |> close(%, "edge2")
+  |> extrude(10, %)
+```
+
+### Arguments
+
+* `data`: `LineData` - Data to draw a line. (REQUIRED)
+```
+{
+	// The tag.
+	tag: string,
+	// The to point.
+	to: [number, number],
+} |
+[number, number]
+```
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/lineTo.md

@@ -0,0 +1,386 @@
+---
+title: "lineTo"
+excerpt: "Draw a line to a point."
+layout: manual
+---
+
+Draw a line to a point.
+
+
+
+```
+lineTo(data: LineToData, sketch_group: SketchGroup) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+fn rectShape = (pos, w, l) => {
+  const rr = startSketchOn('YZ')
+  |> startProfileAt([pos[0] - (w / 2), pos[1] - (l / 2)], %)
+  |> lineTo({
+       to: [pos[0] + w / 2, pos[1] - (l / 2)],
+       tag: "edge1"
+     }, %)
+  |> lineTo({
+       to: [pos[0] + w / 2, pos[1] + l / 2],
+       tag: "edge2"
+     }, %)
+  |> lineTo({
+       to: [pos[0] - (w / 2), pos[1] + l / 2],
+       tag: "edge3"
+     }, %)
+  |> close(%, "edge4")
+  return rr
+}
+
+// Create the mounting plate extrusion, holes, and fillets
+const part = rectShape([0, 0], 20, 20)
+```
+
+### Arguments
+
+* `data`: `LineToData` - Data to draw a line to a point. (REQUIRED)
+```
+{
+	// The tag.
+	tag: string,
+	// The to point.
+	to: [number, number],
+} |
+[number, number]
+```
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/ln.md

@@ -0,0 +1,30 @@
+---
+title: "ln"
+excerpt: "Computes the natural logarithm of the number."
+layout: manual
+---
+
+Computes the natural logarithm of the number.
+
+
+
+```
+ln(num: number) -> number
+```
+
+### Examples
+
+```kcl
+const myVar = ln(4)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/log.md

@@ -0,0 +1,31 @@
+---
+title: "log"
+excerpt: "Computes the logarithm of the number with respect to an arbitrary base."
+layout: manual
+---
+
+Computes the logarithm of the number with respect to an arbitrary base.
+
+The result might not be correctly rounded owing to implementation details; `log2()` can produce more accurate results for base 2, and `log10()` can produce more accurate results for base 10.
+
+```
+log(num: number, base: number) -> number
+```
+
+### Examples
+
+```kcl
+const myVar = log(4, 2)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+* `base`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/log10.md

@@ -0,0 +1,30 @@
+---
+title: "log10"
+excerpt: "Computes the base 10 logarithm of the number."
+layout: manual
+---
+
+Computes the base 10 logarithm of the number.
+
+
+
+```
+log10(num: number) -> number
+```
+
+### Examples
+
+```kcl
+const myVar = log10(4)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/log2.md

@@ -0,0 +1,30 @@
+---
+title: "log2"
+excerpt: "Computes the base 2 logarithm of the number."
+layout: manual
+---
+
+Computes the base 2 logarithm of the number.
+
+
+
+```
+log2(num: number) -> number
+```
+
+### Examples
+
+```kcl
+const myVar = log2(4)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/max.md

@@ -0,0 +1,30 @@
+---
+title: "max"
+excerpt: "Computes the maximum of the given arguments."
+layout: manual
+---
+
+Computes the maximum of the given arguments.
+
+
+
+```
+max(args: [number]) -> number
+```
+
+### Examples
+
+```kcl
+const myVar = max(4, 5, 6)
+```
+
+### Arguments
+
+* `args`: `[number]` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/min.md

@@ -0,0 +1,30 @@
+---
+title: "min"
+excerpt: "Computes the minimum of the given arguments."
+layout: manual
+---
+
+Computes the minimum of the given arguments.
+
+
+
+```
+min(args: [number]) -> number
+```
+
+### Examples
+
+```kcl
+const myVar = min(4, 5, 6)
+```
+
+### Arguments
+
+* `args`: `[number]` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/patternCircular2d.md

@@ -0,0 +1,213 @@
+---
+title: "patternCircular2d"
+excerpt: "A circular pattern on a 2D sketch."
+layout: manual
+---
+
+A circular pattern on a 2D sketch.
+
+
+
+```
+patternCircular2d(data: CircularPattern2dData, sketch_group: SketchGroup) -> [SketchGroup]
+```
+
+### Examples
+
+```kcl
+const part = startSketchOn('XY')
+  |> circle([0, 0], 2, %)
+  |> patternCircular2d({
+       center: [20, 20],
+       repetitions: 12,
+       arcDegrees: 210,
+       rotateDuplicates: true
+     }, %)
+```
+
+### Arguments
+
+* `data`: `CircularPattern2dData` - Data for a circular pattern on a 2D sketch. (REQUIRED)
+```
+{
+	// The arc angle (in degrees) to place the repetitions. Must be greater than 0.
+	arcDegrees: number,
+	// The center about which to make th pattern. This is a 2D vector.
+	center: [number, number],
+	// The number of repetitions. Must be greater than 0. This excludes the original entity. For example, if `repetitions` is 1, the original entity will be copied once.
+	repetitions: number,
+	// Whether or not to rotate the duplicates as they are copied.
+	rotateDuplicates: string,
+}
+```
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`[SketchGroup]`
+
+
+

docs/kcl/patternCircular3d.md

@@ -0,0 +1,188 @@
+---
+title: "patternCircular3d"
+excerpt: "A circular pattern on a 3D model."
+layout: manual
+---
+
+A circular pattern on a 3D model.
+
+
+
+```
+patternCircular3d(data: CircularPattern3dData, extrude_group: ExtrudeGroup) -> [ExtrudeGroup]
+```
+
+### Examples
+
+```kcl
+const part = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> line([0, 1], %)
+  |> line([1, 0], %)
+  |> line([0, -1], %)
+  |> close(%)
+  |> extrude(1, %)
+  |> patternCircular3d({
+       axis: [1, 1, 0],
+       center: [10, 0, 10],
+       repetitions: 10,
+       arcDegrees: 360,
+       rotateDuplicates: true
+     }, %)
+```
+
+### Arguments
+
+* `data`: `CircularPattern3dData` - Data for a circular pattern on a 3D model. (REQUIRED)
+```
+{
+	// The arc angle (in degrees) to place the repetitions. Must be greater than 0.
+	arcDegrees: number,
+	// The axis around which to make the pattern. This is a 3D vector.
+	axis: [number, number, number],
+	// The center about which to make th pattern. This is a 3D vector.
+	center: [number, number, number],
+	// The number of repetitions. Must be greater than 0. This excludes the original entity. For example, if `repetitions` is 1, the original entity will be copied once.
+	repetitions: number,
+	// Whether or not to rotate the duplicates as they are copied.
+	rotateDuplicates: string,
+}
+```
+* `extrude_group`: `ExtrudeGroup` - An extrude group is a collection of extrude surfaces. (REQUIRED)
+```
+{
+	// The id of the extrusion end cap
+	endCapId: uuid,
+	// The height of the extrude group.
+	height: number,
+	// The id of the extrude group.
+	id: uuid,
+	// The position of the extrude group.
+	position: [number, number, number],
+	// The rotation of the extrude group.
+	rotation: [number, number, number, number],
+	// The sketch group paths.
+	sketchGroupValues: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The id of the extrusion start cap
+	startCapId: uuid,
+	// The extrude surfaces.
+	value: [{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudePlane",
+} |
+{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudeArc",
+}],
+	// The x-axis of the extrude group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the extrude group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the extrude group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`[ExtrudeGroup]`
+
+
+

docs/kcl/patternLinear2d.md

@@ -0,0 +1,210 @@
+---
+title: "patternLinear2d"
+excerpt: "A linear pattern on a 2D sketch."
+layout: manual
+---
+
+A linear pattern on a 2D sketch.
+
+
+
+```
+patternLinear2d(data: LinearPattern2dData, sketch_group: SketchGroup) -> [SketchGroup]
+```
+
+### Examples
+
+```kcl
+const part = startSketchOn('XY')
+  |> circle([0, 0], 2, %)
+  |> patternLinear2d({
+       axis: [0, 1],
+       repetitions: 12,
+       distance: 2
+     }, %)
+```
+
+### Arguments
+
+* `data`: `LinearPattern2dData` - Data for a linear pattern on a 2D sketch. (REQUIRED)
+```
+{
+	// The axis of the pattern. This is a 2D vector.
+	axis: [number, number],
+	// The distance between each repetition. This can also be referred to as spacing.
+	distance: number,
+	// The number of repetitions. Must be greater than 0. This excludes the original entity. For example, if `repetitions` is 1, the original entity will be copied once.
+	repetitions: number,
+}
+```
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`[SketchGroup]`
+
+
+

docs/kcl/patternLinear3d.md

@@ -0,0 +1,182 @@
+---
+title: "patternLinear3d"
+excerpt: "A linear pattern on a 3D model."
+layout: manual
+---
+
+A linear pattern on a 3D model.
+
+
+
+```
+patternLinear3d(data: LinearPattern3dData, extrude_group: ExtrudeGroup) -> [ExtrudeGroup]
+```
+
+### Examples
+
+```kcl
+const part = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> line([0, 1], %)
+  |> line([1, 0], %)
+  |> line([0, -1], %)
+  |> close(%)
+  |> extrude(1, %)
+  |> patternLinear3d({
+       axis: [1, 0, 1],
+       repetitions: 3,
+       distance: 6
+     }, %)
+```
+
+### Arguments
+
+* `data`: `LinearPattern3dData` - Data for a linear pattern on a 3D model. (REQUIRED)
+```
+{
+	// The axis of the pattern.
+	axis: [number, number, number],
+	// The distance between each repetition. This can also be referred to as spacing.
+	distance: number,
+	// The number of repetitions. Must be greater than 0. This excludes the original entity. For example, if `repetitions` is 1, the original entity will be copied once.
+	repetitions: number,
+}
+```
+* `extrude_group`: `ExtrudeGroup` - An extrude group is a collection of extrude surfaces. (REQUIRED)
+```
+{
+	// The id of the extrusion end cap
+	endCapId: uuid,
+	// The height of the extrude group.
+	height: number,
+	// The id of the extrude group.
+	id: uuid,
+	// The position of the extrude group.
+	position: [number, number, number],
+	// The rotation of the extrude group.
+	rotation: [number, number, number, number],
+	// The sketch group paths.
+	sketchGroupValues: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The id of the extrusion start cap
+	startCapId: uuid,
+	// The extrude surfaces.
+	value: [{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudePlane",
+} |
+{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudeArc",
+}],
+	// The x-axis of the extrude group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the extrude group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the extrude group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`[ExtrudeGroup]`
+
+
+

docs/kcl/pi.md

@@ -0,0 +1,29 @@
+---
+title: "pi"
+excerpt: "Return the value of `pi`. Archimedes’ constant (π)."
+layout: manual
+---
+
+Return the value of `pi`. Archimedes’ constant (π).
+
+
+
+```
+pi() -> number
+```
+
+### Examples
+
+```kcl
+const myVar = pi() * 3.0
+```
+
+### Arguments
+
+
+### Returns
+
+`number`
+
+
+

docs/kcl/pow.md

@@ -0,0 +1,31 @@
+---
+title: "pow"
+excerpt: "Computes the number to a power."
+layout: manual
+---
+
+Computes the number to a power.
+
+
+
+```
+pow(num: number, pow: number) -> number
+```
+
+### Examples
+
+```kcl
+const myVar = pow(4, 2)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+* `pow`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/segAng.md

@@ -0,0 +1,202 @@
+---
+title: "segAng"
+excerpt: "Returns the angle of the segment."
+layout: manual
+---
+
+Returns the angle of the segment.
+
+
+
+```
+segAng(segment_name: string, sketch_group: SketchGroup) -> number
+```
+
+### Examples
+
+```kcl
+const part001 = startSketchOn('XY')
+  |> startProfileAt([4.83, 12.56], %)
+  |> line([15.1, 2.48], %)
+  |> line({ to: [3.15, -9.85], tag: 'seg01' }, %)
+  |> line([-15.17, -4.1], %)
+  |> angledLine([segAng('seg01', %), 12.35], %)
+  |> line([-13.02, 10.03], %)
+  |> close(%)
+  |> extrude(4, %)
+```
+
+### Arguments
+
+* `segment_name`: `string` (REQUIRED)
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`number`
+
+
+

docs/kcl/segEndX.md

@@ -0,0 +1,200 @@
+---
+title: "segEndX"
+excerpt: "Returns the segment end of x."
+layout: manual
+---
+
+Returns the segment end of x.
+
+
+
+```
+segEndX(segment_name: string, sketch_group: SketchGroup) -> number
+```
+
+### Examples
+
+```kcl
+startSketchOn("YZ")
+  |> startProfileAt([0, 0], %)
+  |> line({ to: [5, 0], tag: "thing" }, %)
+  |> line([5, 5], %)
+  |> line([segEndX("thing", %), 5], %)
+  |> close(%)
+  |> extrude(5, %)
+```
+
+### Arguments
+
+* `segment_name`: `string` (REQUIRED)
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`number`
+
+
+

docs/kcl/segEndY.md

@@ -0,0 +1,200 @@
+---
+title: "segEndY"
+excerpt: "Returns the segment end of y."
+layout: manual
+---
+
+Returns the segment end of y.
+
+
+
+```
+segEndY(segment_name: string, sketch_group: SketchGroup) -> number
+```
+
+### Examples
+
+```kcl
+startSketchOn("YZ")
+  |> startProfileAt([0, 0], %)
+  |> line({ to: [5, 0], tag: "thing" }, %)
+  |> line([5, 5], %)
+  |> line([segEndY("thing", %), 5], %)
+  |> close(%)
+  |> extrude(5, %)
+```
+
+### Arguments
+
+* `segment_name`: `string` (REQUIRED)
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`number`
+
+
+

docs/kcl/segLen.md

@@ -0,0 +1,200 @@
+---
+title: "segLen"
+excerpt: "Returns the length of the segment."
+layout: manual
+---
+
+Returns the length of the segment.
+
+
+
+```
+segLen(segment_name: string, sketch_group: SketchGroup) -> number
+```
+
+### Examples
+
+```kcl
+startSketchOn("YZ")
+  |> startProfileAt([0, 0], %)
+  |> line({ to: [5, 0], tag: "thing" }, %)
+  |> line([5, 5], %)
+  |> line([0, segLen("thing", %)], %)
+  |> close(%)
+  |> extrude(5, %)
+```
+
+### Arguments
+
+* `segment_name`: `string` (REQUIRED)
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`number`
+
+
+

docs/kcl/sin.md

@@ -0,0 +1,30 @@
+---
+title: "sin"
+excerpt: "Computes the sine of a number (in radians)."
+layout: manual
+---
+
+Computes the sine of a number (in radians).
+
+
+
+```
+sin(num: number) -> number
+```
+
+### Examples
+
+```kcl
+const myVar = sin(2 * pi())
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/sqrt.md

@@ -0,0 +1,30 @@
+---
+title: "sqrt"
+excerpt: "Computes the square root of a number."
+layout: manual
+---
+
+Computes the square root of a number.
+
+
+
+```
+sqrt(num: number) -> number
+```
+
+### Examples
+
+```kcl
+const myVar = sqrt(4)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/startProfileAt.md

@@ -0,0 +1,265 @@
+---
+title: "startProfileAt"
+excerpt: "Start a profile at a given point."
+layout: manual
+---
+
+Start a profile at a given point.
+
+
+
+```
+startProfileAt(data: LineData, sketch_surface: SketchSurface) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> line([10, 10], %)
+```
+
+### Arguments
+
+* `data`: `LineData` - Data to draw a line. (REQUIRED)
+```
+{
+	// The tag.
+	tag: string,
+	// The to point.
+	to: [number, number],
+} |
+[number, number]
+```
+* `sketch_surface`: `SketchSurface` - A sketch group type. (REQUIRED)
+```
+{
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/startSketchAt.md

@@ -0,0 +1,203 @@
+---
+title: "startSketchAt"
+excerpt: "Start a sketch at a given point on the 'XY' plane."
+layout: manual
+---
+
+Start a sketch at a given point on the 'XY' plane.
+
+
+
+```
+startSketchAt(data: LineData) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+startSketchAt([0, 0])
+  |> line([10, 10], %)
+```
+
+### Arguments
+
+* `data`: `LineData` - Data to draw a line. (REQUIRED)
+```
+{
+	// The tag.
+	tag: string,
+	// The to point.
+	to: [number, number],
+} |
+[number, number]
+```
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/startSketchOn.md

@@ -0,0 +1,286 @@
+---
+title: "startSketchOn"
+excerpt: "Start a sketch on a specific plane or face."
+layout: manual
+---
+
+Start a sketch on a specific plane or face.
+
+
+
+```
+startSketchOn(data: SketchData, tag?: SketchOnFaceTag) -> SketchSurface
+```
+
+### Examples
+
+```kcl
+startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> line([10, 10], %)
+  |> line({ to: [20, 10], tag: "edge1" }, %)
+  |> close(%, "edge2")
+```
+
+```kcl
+fn cube = (pos, scale) => {
+  const sg = startSketchOn('XY')
+  |> startProfileAt(pos, %)
+  |> line([0, scale], %)
+  |> line([scale, 0], %)
+  |> line([0, -scale], %)
+  |> close(%)
+  |> extrude(scale, %)
+
+  return sg
+}
+
+const box = cube([0, 0], 20)
+
+const part001 = startSketchOn(box, "start")
+  |> startProfileAt([0, 0], %)
+  |> line([10, 10], %)
+  |> line({ to: [20, 10], tag: "edge1" }, %)
+  |> close(%)
+  |> extrude(20, %)
+```
+
+### Arguments
+
+* `data`: `SketchData` - Data for start sketch on. You can start a sketch on a plane or an extrude group. (REQUIRED)
+```
+"XY" |
+"-XY" |
+"XZ" |
+"-XZ" |
+"YZ" |
+"-YZ" |
+{
+	plane: {
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s X axis be?
+	x_axis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	y_axis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	z_axis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+} |
+{
+	// The id of the extrusion end cap
+	endCapId: uuid,
+	// The height of the extrude group.
+	height: number,
+	// The id of the extrude group.
+	id: uuid,
+	// The position of the extrude group.
+	position: [number, number, number],
+	// The rotation of the extrude group.
+	rotation: [number, number, number, number],
+	// The sketch group paths.
+	sketchGroupValues: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The id of the extrusion start cap
+	startCapId: uuid,
+	// The extrude surfaces.
+	value: [{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudePlane",
+} |
+{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The name.
+	name: string,
+	// The position.
+	position: [number, number, number],
+	// The rotation.
+	rotation: [number, number, number, number],
+	// The source range.
+	sourceRange: [number, number],
+	type: "extrudeArc",
+}],
+	// The x-axis of the extrude group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the extrude group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the extrude group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+* `tag`: `SketchOnFaceTag` - A tag for sketch on face. (OPTIONAL)
+```
+"start" | "end" |
+string
+```
+
+### Returns
+
+`SketchSurface` - A sketch group type.
+```
+{
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/tan.md

@@ -0,0 +1,30 @@
+---
+title: "tan"
+excerpt: "Computes the tangent of a number (in radians)."
+layout: manual
+---
+
+Computes the tangent of a number (in radians).
+
+
+
+```
+tan(num: number) -> number
+```
+
+### Examples
+
+```kcl
+const myVar = tan(2 * pi())
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/tangentialArc.md

@@ -0,0 +1,377 @@
+---
+title: "tangentialArc"
+excerpt: "Draw an arc."
+layout: manual
+---
+
+Draw an arc.
+
+
+
+```
+tangentialArc(data: TangentialArcData, sketch_group: SketchGroup) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+startSketchOn('-YZ')
+  |> startProfileAt([0, 0], %)
+  |> line({ to: [10, 10], tag: "edge0" }, %)
+  |> tangentialArc({ radius: 10, offset: 90, tag: "edge1" }, %)
+  |> close(%)
+  |> extrude(10, %)
+```
+
+### Arguments
+
+* `data`: `TangentialArcData` - Data to draw a tangential arc. (REQUIRED)
+```
+{
+	// Offset of the arc, in degrees.
+	offset: number,
+	// Radius of the arc. Not to be confused with Raiders of the Lost Ark.
+	radius: number,
+} |
+{
+	// The tag.
+	tag: string,
+	// Where the arc should end. Must lie in the same plane as the current path pen position. Must not be colinear with current path pen position.
+	to: [number, number],
+} |
+[number, number]
+```
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/tangentialArcTo.md

@@ -0,0 +1,362 @@
+---
+title: "tangentialArcTo"
+excerpt: "Draw an arc."
+layout: manual
+---
+
+Draw an arc.
+
+
+
+```
+tangentialArcTo(to: [number], sketch_group: SketchGroup, tag?: String) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+startSketchOn('-YZ')
+  |> startProfileAt([0, 0], %)
+  |> line({ to: [10, 10], tag: "edge0" }, %)
+  |> tangentialArcTo([10, 0], %)
+  |> close(%)
+```
+
+### Arguments
+
+* `to`: `[number]` (REQUIRED)
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+* `tag`: `String` (OPTIONAL)
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/tau.md

@@ -0,0 +1,29 @@
+---
+title: "tau"
+excerpt: "Return the value of `tau`. The full circle constant (τ). Equal to 2π."
+layout: manual
+---
+
+Return the value of `tau`. The full circle constant (τ). Equal to 2π.
+
+
+
+```
+tau() -> number
+```
+
+### Examples
+
+```kcl
+const myVar = tau()
+```
+
+### Arguments
+
+
+### Returns
+
+`number`
+
+
+

docs/kcl/toDegrees.md

@@ -0,0 +1,30 @@
+---
+title: "toDegrees"
+excerpt: "Converts a number from radians to degrees."
+layout: manual
+---
+
+Converts a number from radians to degrees.
+
+
+
+```
+toDegrees(num: number) -> number
+```
+
+### Examples
+
+```kcl
+const myVar = toDegrees(2 * pi())
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/toRadians.md

@@ -0,0 +1,30 @@
+---
+title: "toRadians"
+excerpt: "Converts a number from degrees to radians."
+layout: manual
+---
+
+Converts a number from degrees to radians.
+
+
+
+```
+toRadians(num: number) -> number
+```
+
+### Examples
+
+```kcl
+const myVar = toRadians(180)
+```
+
+### Arguments
+
+* `num`: `number` (REQUIRED)
+
+### Returns
+
+`number`
+
+
+

docs/kcl/types.md

@@ -1,4 +1,8 @@
-# Types
+---
+title: "KCL Types"
+excerpt: "Documentation of types for the KCL standard library for the Zoo Modeling App."
+layout: manual
+---
 
 `KCL` defines the following types and keywords the language.
 

docs/kcl/xLine.md

@@ -0,0 +1,371 @@
+---
+title: "xLine"
+excerpt: "Draw a line on the x-axis."
+layout: manual
+---
+
+Draw a line on the x-axis.
+
+
+
+```
+xLine(data: AxisLineData, sketch_group: SketchGroup) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+startSketchOn('YZ')
+  |> startProfileAt([0, 0], %)
+  |> xLine(10, %)
+  |> line([10, 10], %)
+  |> close(%, "edge1")
+  |> extrude(10, %)
+```
+
+### Arguments
+
+* `data`: `AxisLineData` - Data to draw a line on an axis. (REQUIRED)
+```
+{
+	// The length of the line.
+	length: number,
+	// The tag.
+	tag: string,
+} |
+number
+```
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/xLineTo.md

@@ -0,0 +1,371 @@
+---
+title: "xLineTo"
+excerpt: "Draw a line to a point on the x-axis."
+layout: manual
+---
+
+Draw a line to a point on the x-axis.
+
+
+
+```
+xLineTo(data: AxisLineToData, sketch_group: SketchGroup) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> xLineTo({ to: 10, tag: "edge1" }, %)
+  |> line([10, 10], %)
+  |> close(%, "edge2")
+  |> extrude(10, %)
+```
+
+### Arguments
+
+* `data`: `AxisLineToData` - Data to draw a line to a point on an axis. (REQUIRED)
+```
+{
+	// The tag.
+	tag: string,
+	// The to point.
+	to: number,
+} |
+number
+```
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/yLine.md

@@ -0,0 +1,371 @@
+---
+title: "yLine"
+excerpt: "Draw a line on the y-axis."
+layout: manual
+---
+
+Draw a line on the y-axis.
+
+
+
+```
+yLine(data: AxisLineData, sketch_group: SketchGroup) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> yLine(10, %)
+  |> line([10, 10], %)
+  |> close(%, "edge1")
+  |> extrude(10, %)
+```
+
+### Arguments
+
+* `data`: `AxisLineData` - Data to draw a line on an axis. (REQUIRED)
+```
+{
+	// The length of the line.
+	length: number,
+	// The tag.
+	tag: string,
+} |
+number
+```
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+

docs/kcl/yLineTo.md

@@ -0,0 +1,372 @@
+---
+title: "yLineTo"
+excerpt: "Draw a line to a point on the y-axis."
+layout: manual
+---
+
+Draw a line to a point on the y-axis.
+
+
+
+```
+yLineTo(data: AxisLineToData, sketch_group: SketchGroup) -> SketchGroup
+```
+
+### Examples
+
+```kcl
+startSketchOn('XZ')
+  |> startProfileAt([0, 0], %)
+  |> yLineTo({ to: 10, tag: "edge1" }, %)
+  |> line([10, 10], %)
+  |> close(%, "edge2")
+  |> extrude(10, %)
+  |> fillet({ radius: 2, tags: ["edge2"] }, %)
+```
+
+### Arguments
+
+* `data`: `AxisLineToData` - Data to draw a line to a point on an axis. (REQUIRED)
+```
+{
+	// The tag.
+	tag: string,
+	// The to point.
+	to: number,
+} |
+number
+```
+* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+### Returns
+
+`SketchGroup` - A sketch group is a collection of paths.
+```
+{
+	// The plane id or face id of the sketch group.
+	entityId: uuid,
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The position of the sketch group.
+	position: [number, number, number],
+	// The rotation of the sketch group base plane.
+	rotation: [number, number, number, number],
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "ToPoint",
+} |
+{
+	// arc's direction
+	ccw: string,
+	// the arc's center
+	center: [number, number],
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArcTo",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "TangentialArc",
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Horizontal",
+	// The x coordinate.
+	x: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "AngledLineTo",
+	// The x coordinate.
+	x: number,
+	// The y coordinate.
+	y: number,
+} |
+{
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+	type: "Base",
+}],
+	// The x-axis of the sketch group base plane in the 3D space
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The y-axis of the sketch group base plane in the 3D space
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis of the sketch group base plane in the 3D space
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+}
+```
+
+
+