From 542a9a3f1365618ab87316d507b28ae3259abf46 Mon Sep 17 00:00:00 2001
From: Jonathan Tran <jonnytran@gmail.com>
Date: Mon, 14 Apr 2025 12:19:09 -0400
Subject: [PATCH] Fix to update prompt-to-edit snapshot (#6320)

* Fix to update prompt-to-edit snapshot

* Delete snapshot with no TS test file
---
 ...hot-tests-spec-ts--change-colour.snap.json | 33 -------------------
 ...example-snapshots--change-colour.snap.json |  9 ++---
 2 files changed, 5 insertions(+), 37 deletions(-)
 delete mode 100644 e2e/playwright/snapshots/prompt-to-edit/prompt-to-edit-snapshot-tests-spec-ts--change-colour.snap.json

diff --git a/e2e/playwright/snapshots/prompt-to-edit/prompt-to-edit-snapshot-tests-spec-ts--change-colour.snap.json b/e2e/playwright/snapshots/prompt-to-edit/prompt-to-edit-snapshot-tests-spec-ts--change-colour.snap.json
deleted file mode 100644
index 9636941ee..000000000
--- a/e2e/playwright/snapshots/prompt-to-edit/prompt-to-edit-snapshot-tests-spec-ts--change-colour.snap.json
+++ /dev/null
@@ -1,33 +0,0 @@
-{
-  "original_source_code": "sketch001 = startSketchOn(XZ)\nprofile001 = startProfileAt([57.81, 250.51], sketch001)\n  |> line(end = [121.13, 56.63], tag = $seg02)\n  |> line(end = [83.37, -34.61], tag = $seg01)\n  |> line(end = [19.66, -116.4])\n  |> line(end = [-221.8, -41.69])\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude001 = extrude(profile001, length = 200)\nsketch002 = startSketchOn('XZ')\n  |> startProfileAt([-73.64, -42.89], %)\n  |> xLine(length = 173.71)\n  |> line(end = [-22.12, -94.4])\n  |> xLine(length = -156.98)\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude002 = extrude(sketch002, length = 50)\nsketch003 = startSketchOn(XY)\n  |> startProfileAt([52.92, 157.81], %)\n  |> angledLine(angle = 0, length = 176.4, tag = $rectangleSegmentA001)\n  |> angledLine(angle = segAng(rectangleSegmentA001) - 90,\n       length = 53.4\n     ], tag = $rectangleSegmentB001)\n  |> angledLine(angle = segAng(rectangleSegmentA001),\n       length = -segLen(rectangleSegmentA001)\n     tag = $rectangleSegmentC001)\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude003 = extrude(sketch003, length = 20)\n",
-  "prompt": "make this neon green please, use #39FF14",
-  "source_ranges": [
-    {
-      "prompt": "The users main selection is the end cap of a general-sweep (that is an extrusion, revolve, sweep or loft).\nThe source range most likely refers to \"startProfileAt\" simply because this is the start of the profile that was swept.\nIf you need to operate on this cap, for example for sketching on the face, you can use the special string END i.e. `startSketchOn(someSweepVariable, END)`\nWhen they made this selection they main have intended this surface directly or meant something more general like the sweep body.\nSee later source ranges for more context.",
-      "range": {
-        "start": {
-          "line": 11,
-          "column": 5
-        },
-        "end": {
-          "line": 11,
-          "column": 40
-        }
-      }
-    },
-    {
-      "prompt": "This is the sweep's source range from the user's main selection of the end cap.",
-      "range": {
-        "start": {
-          "line": 17,
-          "column": 13
-        },
-        "end": {
-          "line": 17,
-          "column": 44
-        }
-      }
-    }
-  ],
-  "kcl_version": "0.2.48"
-}
diff --git a/e2e/playwright/snapshots/prompt-to-edit/prompt-to-edit-snapshot-tests-spec-ts--edit-with-ai-example-snapshots--change-colour.snap.json b/e2e/playwright/snapshots/prompt-to-edit/prompt-to-edit-snapshot-tests-spec-ts--edit-with-ai-example-snapshots--change-colour.snap.json
index 94b3ec8ef..e8925316b 100644
--- a/e2e/playwright/snapshots/prompt-to-edit/prompt-to-edit-snapshot-tests-spec-ts--edit-with-ai-example-snapshots--change-colour.snap.json
+++ b/e2e/playwright/snapshots/prompt-to-edit/prompt-to-edit-snapshot-tests-spec-ts--edit-with-ai-example-snapshots--change-colour.snap.json
@@ -1,9 +1,9 @@
 {
-  "original_source_code": "sketch001 = startSketchOn(XZ)\nprofile001 = startProfileAt([57.81, 250.51], sketch001)\n  |> line(end = [121.13, 56.63], tag = $seg02)\n  |> line(end = [83.37, -34.61], tag = $seg01)\n  |> line(end = [19.66, -116.4])\n  |> line(end = [-221.8, -41.69])\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude001 = extrude(profile001, length = 200)\nsketch002 = startSketchOn(XZ)\n  |> startProfileAt([-73.64, -42.89], %)\n  |> xLine(length = 173.71)\n  |> line(end = [-22.12, -94.4])\n  |> xLine(length = -156.98)\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude002 = extrude(sketch002, length = 50)\nsketch003 = startSketchOn(XY)\n  |> startProfileAt([52.92, 157.81], %)\n  |> angledLine(angle = 0, 176.4], %, $rectangleSegmentA001)\n  |> angledLine([\n       segAng(rectangleSegmentA001) - 90,\n       53.4\n     ], %, length = $rectangleSegmentB001)\n  |> angledLine(\n       angle = segAng(rectangleSegmentA001),\n       length = -segLen(rectangleSegmentA001),\n     tag = $rectangleSegmentC001)\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude003 = extrude(sketch003, length = 20)\n",
+  "original_source_code": "sketch001 = startSketchOn(XZ)\nprofile001 = startProfileAt([57.81, 250.51], sketch001)\n  |> line(end = [121.13, 56.63], tag = $seg02)\n  |> line(end = [83.37, -34.61], tag = $seg01)\n  |> line(end = [19.66, -116.4])\n  |> line(end = [-221.8, -41.69])\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude001 = extrude(profile001, length = 200)\nsketch002 = startSketchOn(XZ)\n  |> startProfileAt([-73.64, -42.89], %)\n  |> xLine(length = 173.71)\n  |> line(end = [-22.12, -94.4])\n  |> xLine(length = -156.98)\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude002 = extrude(sketch002, length = 50)\nsketch003 = startSketchOn(XY)\n  |> startProfileAt([52.92, 157.81], %)\n  |> angledLine(angle = 0, length = 176.4, tag = $rectangleSegmentA001)\n  |> angledLine(\n       angle = segAng(rectangleSegmentA001) - 90,\n       length = 53.4,\n       tag = $rectangleSegmentB001,\n     )\n  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude003 = extrude(sketch003, length = 20)\n",
   "prompt": "make this neon green please, use #39FF14",
   "source_ranges": [
     {
-      "prompt": "The users main selection is the end cap of a general-sweep (that is an extrusion, revolve, sweep or loft).\nThe source range most likely refers to \"startProfileAt\" simply because this is the start of the profile that was swept.\nIf you need to operate on this cap, for example for sketching on the face, you can use the special string END i.e. `startSketchOn(someSweepVariable, END)`\nWhen they made this selection they main have intended this surface directly or meant something more general like the sweep body.\nSee later source ranges for more context.",
+      "prompt": "The users main selection is the end cap of a general-sweep (that is an extrusion, revolve, sweep or loft).\nThe source range most likely refers to \"startProfileAt\" simply because this is the start of the profile that was swept.\nIf you need to operate on this cap, for example for sketching on the face, you can use the special string END i.e. `startSketchOn(someSweepVariable, face = END)`\nWhen they made this selection they main have intended this surface directly or meant something more general like the sweep body.\nSee later source ranges for more context.",
       "range": {
         "start": {
           "line": 11,
@@ -29,5 +29,6 @@
       }
     }
   ],
-  "kcl_version": "0.2.57"
-}
+  "project_name": "testDefault",
+  "kcl_version": "0.2.61"
+}
\ No newline at end of file