fix edge functions when after sketch on face/fn (#3184)

Signed-off-by: Jess Frazelle <github@jessfraz.com>

docs/kcl/angleToMatchLengthX.md

@@ -124,7 +124,7 @@ const extrusion = extrude(5, sketch001)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -198,7 +198,7 @@ const extrusion = extrude(5, sketch001)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/angleToMatchLengthY.md

@@ -128,7 +128,7 @@ const extrusion = extrude(5, sketch001)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -202,7 +202,7 @@ const extrusion = extrude(5, sketch001)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/angledLine.md

@@ -43,7 +43,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -117,7 +117,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -455,7 +455,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -529,7 +529,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/angledLineOfXLength.md

@@ -42,7 +42,7 @@ const extrusion = extrude(10, sketch001)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -116,7 +116,7 @@ const extrusion = extrude(10, sketch001)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -454,7 +454,7 @@ const extrusion = extrude(10, sketch001)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -528,7 +528,7 @@ const extrusion = extrude(10, sketch001)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/angledLineOfYLength.md

@@ -44,7 +44,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -118,7 +118,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -456,7 +456,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -530,7 +530,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/angledLineThatIntersects.md

@@ -136,7 +136,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -210,7 +210,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -548,7 +548,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -622,7 +622,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/angledLineToX.md

@@ -41,7 +41,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -115,7 +115,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -453,7 +453,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -527,7 +527,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/angledLineToY.md

@@ -41,7 +41,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -115,7 +115,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -453,7 +453,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -527,7 +527,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/arc.md

@@ -52,7 +52,7 @@ const exampleSketch = startSketchOn('XZ')
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -126,7 +126,7 @@ const exampleSketch = startSketchOn('XZ')
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -464,7 +464,7 @@ const exampleSketch = startSketchOn('XZ')
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -538,7 +538,7 @@ const exampleSketch = startSketchOn('XZ')
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/bezierCurve.md

@@ -47,7 +47,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -121,7 +121,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -459,7 +459,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -533,7 +533,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/chamfer.md

@@ -181,7 +181,7 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -581,7 +581,7 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {

docs/kcl/circle.md

@@ -114,7 +114,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -324,7 +324,7 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -619,7 +619,7 @@ const example = extrude(5, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -693,7 +693,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/close.md

@@ -42,7 +42,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -116,7 +116,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -454,7 +454,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -528,7 +528,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/extrude.md

@@ -67,7 +67,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group_set`: `SketchGroupSet` - A sketch group or a group of sketch groups. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -141,7 +141,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -511,7 +511,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {

docs/kcl/fillet.md

@@ -181,7 +181,7 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -581,7 +581,7 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {

docs/kcl/helix.md

@@ -82,7 +82,7 @@ const part001 = startSketchOn('XY')
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -473,7 +473,7 @@ const part001 = startSketchOn('XY')
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {

docs/kcl/hole.md

@@ -53,7 +53,7 @@ const example = extrude(1, exampleSketch)
 * `hole_sketch_group`: `SketchGroupSet` - A sketch group or a group of sketch groups. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -127,7 +127,7 @@ const example = extrude(1, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -457,7 +457,7 @@ const example = extrude(1, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -531,7 +531,7 @@ const example = extrude(1, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -860,7 +860,7 @@ const example = extrude(1, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -934,7 +934,7 @@ const example = extrude(1, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/lastSegX.md

@@ -33,7 +33,7 @@ const example = extrude(5, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -107,7 +107,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/lastSegY.md

@@ -33,7 +33,7 @@ const example = extrude(5, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -107,7 +107,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/line.md

@@ -46,7 +46,7 @@ const example = extrude(5, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -120,7 +120,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -458,7 +458,7 @@ const example = extrude(5, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -532,7 +532,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/lineTo.md

@@ -33,7 +33,7 @@ const example = extrude(5, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -107,7 +107,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -445,7 +445,7 @@ const example = extrude(5, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -519,7 +519,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/patternCircular2d.md

@@ -51,7 +51,7 @@ const example = extrude(1, exampleSketch)
 * `sketch_group_set`: `SketchGroupSet` - A sketch group or a group of sketch groups. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -125,7 +125,7 @@ const example = extrude(1, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/patternCircular3d.md

@@ -87,7 +87,7 @@ const example = extrude(-5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {

docs/kcl/patternLinear2d.md

@@ -44,7 +44,7 @@ const example = extrude(1, exampleSketch)
 * `sketch_group_set`: `SketchGroupSet` - A sketch group or a group of sketch groups. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -118,7 +118,7 @@ const example = extrude(1, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/patternLinear3d.md

@@ -85,7 +85,7 @@ const example = extrude(1, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {

docs/kcl/patternTransform.md

@@ -87,7 +87,7 @@ let vase = layer()
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {

docs/kcl/profileStart.md

@@ -34,7 +34,7 @@ const sketch001 = startSketchOn('XY')
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -108,7 +108,7 @@ const sketch001 = startSketchOn('XY')
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/profileStartX.md

@@ -29,7 +29,7 @@ const sketch001 = startSketchOn('XY')
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -103,7 +103,7 @@ const sketch001 = startSketchOn('XY')
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/profileStartY.md

@@ -28,7 +28,7 @@ const sketch001 = startSketchOn('XY')
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -102,7 +102,7 @@ const sketch001 = startSketchOn('XY')
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/revolve.md

@@ -250,7 +250,7 @@ uuid |
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -324,7 +324,7 @@ uuid |
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -690,7 +690,7 @@ uuid |
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {

docs/kcl/shell.md

@@ -169,7 +169,7 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -560,7 +560,7 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {

docs/kcl/startProfileAt.md

@@ -129,7 +129,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -411,7 +411,7 @@ const example = extrude(5, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -485,7 +485,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/startSketchAt.md

@@ -59,7 +59,7 @@ const example = extrude(5, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -133,7 +133,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/startSketchOn.md

@@ -198,7 +198,7 @@ const a1 = startSketchOn({
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -610,7 +610,7 @@ const a1 = startSketchOn({
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {

docs/kcl/tangentialArc.md

@@ -42,7 +42,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -116,7 +116,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -454,7 +454,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -528,7 +528,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/tangentialArcTo.md

@@ -33,7 +33,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -107,7 +107,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -445,7 +445,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -519,7 +519,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/xLine.md

@@ -36,7 +36,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -110,7 +110,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -448,7 +448,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -522,7 +522,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/xLineTo.md

@@ -36,7 +36,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -110,7 +110,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -448,7 +448,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -522,7 +522,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/yLine.md

@@ -34,7 +34,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -108,7 +108,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -446,7 +446,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -520,7 +520,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

docs/kcl/yLineTo.md

@@ -32,7 +32,7 @@ const example = extrude(5, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -106,7 +106,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -444,7 +444,7 @@ const example = extrude(5, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -518,7 +518,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,

packages/codemirror-lsp-client/src/plugin/lsp.ts

@@ -17,7 +17,6 @@ import type {
   PluginSpec,
   ViewPlugin,
 } from '@codemirror/view'
-import { setDiagnosticsEffect } from '@codemirror/lint'
 import { EditorView, Tooltip } from '@codemirror/view'
 
 import type { PublishDiagnosticsParams } from 'vscode-languageserver-protocol'

src/wasm-lib/Cargo.lock

@@ -1391,7 +1391,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-lib"
-version = "0.2.2"
+version = "0.2.3"
 dependencies = [
  "anyhow",
  "approx",
@@ -1460,7 +1460,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-test-server"
-version = "0.1.3"
+version = "0.1.4"
 dependencies = [
  "anyhow",
  "hyper",

src/wasm-lib/kcl-test-server/Cargo.toml

@@ -1,7 +1,7 @@
 [package]
 name = "kcl-test-server"
 description = "A test server for KCL"
-version = "0.1.3"
+version = "0.1.4"
 edition = "2021"
 license = "MIT"
 

src/wasm-lib/kcl/Cargo.toml

@@ -1,7 +1,7 @@
 [package]
 name = "kcl-lib"
 description = "KittyCAD Language implementation and tools"
-version = "0.2.2"
+version = "0.2.3"
 edition = "2021"
 license = "MIT"
 repository = "https://github.com/KittyCAD/modeling-app"

src/wasm-lib/kcl/src/ast/types.rs

@@ -1392,6 +1392,7 @@ impl CallExpression {
 
                                 let mut info = info.clone();
                                 info.surface = Some(value.clone());
+                                info.sketch_group = extrude_group.id;
                                 t.info = Some(info);
 
                                 memory.update_tag(&tag.name, t.clone())?;
@@ -1400,9 +1401,15 @@ impl CallExpression {
                                 extrude_group.sketch_group.tags.insert(tag.name.clone(), t);
                             }
                         }
+
+                        // Find the stale sketch group in memory and update it.
+                        if let Some(current_env) = memory.environments.get_mut(memory.current_env.index()) {
+                            current_env.update_sketch_group_tags(&extrude_group.sketch_group);
+                        }
                     }
                     _ => {}
                 }
+
                 Ok(result)
             }
             FunctionKind::Std(func) => {

src/wasm-lib/kcl/src/executor.rs

@@ -193,6 +193,22 @@ impl Environment {
     pub fn contains_key(&self, key: &str) -> bool {
         self.bindings.contains_key(key)
     }
+
+    pub fn update_sketch_group_tags(&mut self, sg: &SketchGroup) {
+        if sg.tags.is_empty() {
+            return;
+        }
+
+        for (_, val) in self.bindings.iter_mut() {
+            if let MemoryItem::SketchGroup(ref mut sketch_group) = val {
+                if sketch_group.original_id == sg.original_id {
+                    for tag in sg.tags.iter() {
+                        sketch_group.tags.insert(tag.0.clone(), tag.1.clone());
+                    }
+                }
+            }
+        }
+    }
 }
 
 /// Dynamic state that depends on the dynamic flow of the program, like the call
@@ -899,7 +915,7 @@ pub struct TagEngineInfo {
 #[ts(export)]
 #[serde(tag = "type", rename_all = "camelCase")]
 pub struct SketchGroup {
-    /// The id of the sketch group.
+    /// The id of the sketch group (this will change when the engine's reference to it changes.
     pub id: uuid::Uuid,
     /// The paths in the sketch group.
     pub value: Vec<Path>,
@@ -910,6 +926,10 @@ pub struct SketchGroup {
     /// Tag identifiers that have been declared in this sketch group.
     #[serde(default, skip_serializing_if = "HashMap::is_empty")]
     pub tags: HashMap<String, TagIdentifier>,
+    /// The original id of the sketch group. This stays the same even if the sketch group is
+    /// is sketched on face etc.
+    #[serde(skip)]
+    pub original_id: uuid::Uuid,
     /// Metadata.
     #[serde(rename = "__meta")]
     pub meta: Vec<Metadata>,

src/wasm-lib/kcl/src/std/sketch.rs

@@ -1290,6 +1290,7 @@ pub(crate) async fn inner_start_profile_at(
 
     let sketch_group = SketchGroup {
         id: path_id,
+        original_id: path_id,
         on: sketch_surface.clone(),
         value: vec![],
         meta: vec![args.source_range.into()],

src/wasm-lib/tests/executor/inputs/pentagon_fillet_sugar.kcl

@@ -24,7 +24,7 @@ const plumbus1 =
   |> extrude(plumbusLen, %)
   |> fillet({
        radius: 5,
-       tags: [c1.tags.arc_tag]
+       tags: [c1.tags.arc_tag, getOppositeEdge(c1.tags.arc_tag)]
      }, %)
 const c2 = circl(200, a)
 const plumbus0 =
@@ -32,7 +32,7 @@ const plumbus0 =
   |> extrude(plumbusLen, %)
   |> fillet({
        radius: 5,
-       tags: [c2.tags.arc_tag]
+       tags: [c2.tags.arc_tag, getOppositeEdge(c2.tags.arc_tag)]
      }, %)
 
 

src/wasm-lib/tests/executor/main.rs

@@ -1746,7 +1746,7 @@ const plumbus0 = circle0
   |> extrude(10, %)
   |> fillet({
        radius: 0.5,
-       tags: [circle0.tags.arc1]
+       tags: [circle0.tags.arc1, getOppositeEdge(circle0.tags.arc1)]
      }, %)
 
 const circle1 = make_circle(p, p.sketchGroup.tags.b, [0, 0], 2.5)
@@ -1754,7 +1754,7 @@ const plumbus1 = circle1
    |> extrude(10, %)
    |> fillet({
         radius: 0.5,
-        tags: [circle1.tags.arc1]
+        tags: [circle1.tags.arc1, getOppositeEdge(circle1.tags.arc1)]
       }, %)
 "#;