Sketch on chamfer fix test for when fixed in engine (#3147)

* updates

Signed-off-by: Jess Frazelle <github@jessfraz.com>

* updates

Signed-off-by: Jess Frazelle <github@jessfraz.com>

---------

Signed-off-by: Jess Frazelle <github@jessfraz.com>

docs/kcl/angleToMatchLengthX.md

@@ -83,6 +83,38 @@ const extrusion = extrude(5, sketch001)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 },
 },
 	value: string,
@@ -138,6 +170,12 @@ const extrusion = extrude(5, sketch001)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -311,6 +349,38 @@ const extrusion = extrude(5, sketch001)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/angleToMatchLengthY.md

@@ -87,6 +87,38 @@ const extrusion = extrude(5, sketch001)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 },
 },
 	value: string,
@@ -142,6 +174,12 @@ const extrusion = extrude(5, sketch001)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -315,6 +353,38 @@ const extrusion = extrude(5, sketch001)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/angledLine.md

@@ -89,6 +89,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -262,6 +268,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -463,6 +501,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -636,6 +680,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/angledLineOfXLength.md

@@ -88,6 +88,12 @@ const extrusion = extrude(10, sketch001)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -261,6 +267,38 @@ const extrusion = extrude(10, sketch001)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -462,6 +500,12 @@ const extrusion = extrude(10, sketch001)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -635,6 +679,38 @@ const extrusion = extrude(10, sketch001)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/angledLineOfYLength.md

@@ -90,6 +90,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -263,6 +269,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -464,6 +502,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -637,6 +681,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/angledLineThatIntersects.md

@@ -93,6 +93,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 },
 },
 	value: string,
@@ -150,6 +182,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -323,6 +361,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -524,6 +594,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -697,6 +773,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/angledLineToX.md

@@ -87,6 +87,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -260,6 +266,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -461,6 +499,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -634,6 +678,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/angledLineToY.md

@@ -87,6 +87,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -260,6 +266,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -461,6 +499,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -634,6 +678,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/arc.md

@@ -98,6 +98,12 @@ const exampleSketch = startSketchOn('XZ')
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -271,6 +277,38 @@ const exampleSketch = startSketchOn('XZ')
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -472,6 +510,12 @@ const exampleSketch = startSketchOn('XZ')
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -645,6 +689,38 @@ const exampleSketch = startSketchOn('XZ')
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/bezierCurve.md

@@ -93,6 +93,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -266,6 +272,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -467,6 +505,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -640,6 +684,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/chamfer.md

@@ -103,6 +103,38 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 },
 },
 	value: string,
@@ -121,6 +153,12 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -189,6 +227,12 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -245,6 +289,38 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -418,6 +494,38 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 }
 ```
@@ -445,6 +553,12 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -513,6 +627,12 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -569,6 +689,38 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -742,6 +894,38 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 }
 ```

docs/kcl/circle.md

@@ -86,6 +86,12 @@ const example = extrude(5, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -259,6 +265,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -332,6 +370,12 @@ const example = extrude(5, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -388,6 +432,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -589,6 +665,12 @@ const example = extrude(5, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -762,6 +844,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/close.md

@@ -88,6 +88,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -261,6 +267,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -462,6 +500,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -635,6 +679,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/extrude.md

@@ -113,6 +113,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -286,6 +292,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -445,6 +483,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -513,6 +557,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -569,6 +619,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -743,6 +825,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 } |
 {

docs/kcl/fillet.md

@@ -9,7 +9,7 @@ Create fillets on tagged paths.
 
 
 ```js
-fillet(data: FilletData, extrude_group: ExtrudeGroup) -> ExtrudeGroup
+fillet(data: FilletData, extrude_group: ExtrudeGroup, tag?: TagDeclarator) -> ExtrudeGroup
 ```
 
 ### Examples
@@ -103,6 +103,38 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 },
 },
 	value: string,
@@ -121,6 +153,12 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -189,6 +227,12 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -245,6 +289,38 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -418,9 +494,50 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 }
 ```
+* `tag`: `TagDeclarator` (OPTIONAL)
+```js
+{
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+}
+```
 
 ### Returns
 
@@ -436,6 +553,12 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -504,6 +627,12 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -560,6 +689,38 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -733,6 +894,38 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 }
 ```

docs/kcl/getNextAdjacentEdge.md

@@ -90,6 +90,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 },
 },
 	value: string,

docs/kcl/getOppositeEdge.md

@@ -90,6 +90,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 },
 },
 	value: string,

docs/kcl/getPreviousAdjacentEdge.md

@@ -90,6 +90,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 },
 },
 	value: string,

docs/kcl/helix.md

@@ -55,6 +55,12 @@ const part001 = startSketchOn('XY')
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -123,6 +129,12 @@ const part001 = startSketchOn('XY')
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -179,6 +191,38 @@ const part001 = startSketchOn('XY')
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -352,6 +396,38 @@ const part001 = startSketchOn('XY')
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 }
 ```
@@ -370,6 +446,12 @@ const part001 = startSketchOn('XY')
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -438,6 +520,12 @@ const part001 = startSketchOn('XY')
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -494,6 +582,38 @@ const part001 = startSketchOn('XY')
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -667,6 +787,38 @@ const part001 = startSketchOn('XY')
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 }
 ```

docs/kcl/hole.md

@@ -99,6 +99,12 @@ const example = extrude(1, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -272,6 +278,38 @@ const example = extrude(1, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -465,6 +503,12 @@ const example = extrude(1, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -638,6 +682,38 @@ const example = extrude(1, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -830,6 +906,12 @@ const example = extrude(1, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -1003,6 +1085,38 @@ const example = extrude(1, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/lastSegX.md

@@ -79,6 +79,12 @@ const example = extrude(5, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -252,6 +258,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/lastSegY.md

@@ -79,6 +79,12 @@ const example = extrude(5, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -252,6 +258,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/line.md

@@ -92,6 +92,12 @@ const example = extrude(5, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -265,6 +271,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -466,6 +504,12 @@ const example = extrude(5, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -639,6 +683,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/lineTo.md

@@ -79,6 +79,12 @@ const example = extrude(5, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -252,6 +258,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -453,6 +491,12 @@ const example = extrude(5, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -626,6 +670,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/patternCircular2d.md

@@ -97,6 +97,12 @@ const example = extrude(1, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -270,6 +276,38 @@ const example = extrude(1, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/patternCircular3d.md

@@ -59,6 +59,12 @@ const example = extrude(-5, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -127,6 +133,12 @@ const example = extrude(-5, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -183,6 +195,38 @@ const example = extrude(-5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -357,6 +401,38 @@ const example = extrude(-5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 } |
 {

docs/kcl/patternLinear2d.md

@@ -90,6 +90,12 @@ const example = extrude(1, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -263,6 +269,38 @@ const example = extrude(1, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/patternLinear3d.md

@@ -57,6 +57,12 @@ const example = extrude(1, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -125,6 +131,12 @@ const example = extrude(1, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -181,6 +193,38 @@ const example = extrude(1, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -355,6 +399,38 @@ const example = extrude(1, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 } |
 {

docs/kcl/patternTransform.md

@@ -59,6 +59,12 @@ let vase = layer()
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -127,6 +133,12 @@ let vase = layer()
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -183,6 +195,38 @@ let vase = layer()
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -357,6 +401,38 @@ let vase = layer()
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 } |
 {

docs/kcl/profileStart.md

@@ -80,6 +80,12 @@ const sketch001 = startSketchOn('XY')
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -253,6 +259,38 @@ const sketch001 = startSketchOn('XY')
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/profileStartX.md

@@ -75,6 +75,12 @@ const sketch001 = startSketchOn('XY')
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -248,6 +254,38 @@ const sketch001 = startSketchOn('XY')
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/profileStartY.md

@@ -74,6 +74,12 @@ const sketch001 = startSketchOn('XY')
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -247,6 +253,38 @@ const sketch001 = startSketchOn('XY')
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/revolve.md

@@ -209,6 +209,38 @@ uuid |
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 },
 },
 	value: string,
@@ -264,6 +296,12 @@ uuid |
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -437,6 +475,38 @@ uuid |
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -592,6 +662,12 @@ uuid |
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -660,6 +736,12 @@ uuid |
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -716,6 +798,38 @@ uuid |
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -889,6 +1003,38 @@ uuid |
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 }
 ```

docs/kcl/segAng.md

@@ -87,6 +87,38 @@ const example = extrude(4, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 },
 },
 	value: string,

docs/kcl/segEndX.md

@@ -85,6 +85,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 },
 },
 	value: string,

docs/kcl/segEndY.md

@@ -86,6 +86,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 },
 },
 	value: string,

docs/kcl/segLen.md

@@ -84,6 +84,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 },
 },
 	value: string,

docs/kcl/shell.md

@@ -89,6 +89,38 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 },
 },
 	value: string,
@@ -109,6 +141,12 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -177,6 +215,12 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -233,6 +277,38 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -406,6 +482,38 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 }
 ```
@@ -424,6 +532,12 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -492,6 +606,12 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -548,6 +668,38 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -721,6 +873,38 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 }
 ```

docs/kcl/startProfileAt.md

@@ -101,6 +101,12 @@ const example = extrude(5, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -331,6 +337,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -419,6 +457,12 @@ const example = extrude(5, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -592,6 +636,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/startSketchAt.md

@@ -105,6 +105,12 @@ const example = extrude(5, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -278,6 +284,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/startSketchOn.md

@@ -170,6 +170,12 @@ const a1 = startSketchOn({
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -400,6 +406,38 @@ const a1 = startSketchOn({
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 }
 ```
@@ -459,6 +497,38 @@ const a1 = startSketchOn({
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 },
 },
 	value: string,
@@ -512,6 +582,12 @@ const a1 = startSketchOn({
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -742,6 +818,38 @@ const a1 = startSketchOn({
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/tangentialArc.md

@@ -88,6 +88,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -261,6 +267,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -462,6 +500,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -635,6 +679,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/tangentialArcTo.md

@@ -79,6 +79,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -252,6 +258,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -453,6 +491,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -626,6 +670,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/xLine.md

@@ -82,6 +82,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -255,6 +261,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -456,6 +494,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -629,6 +673,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/xLineTo.md

@@ -82,6 +82,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -255,6 +261,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -456,6 +494,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -629,6 +673,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/yLine.md

@@ -80,6 +80,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -253,6 +259,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -454,6 +492,12 @@ const example = extrude(10, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -627,6 +671,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/yLineTo.md

@@ -78,6 +78,12 @@ const example = extrude(5, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -251,6 +257,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -452,6 +490,12 @@ const example = extrude(5, exampleSketch)
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
@@ -625,6 +669,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

src/wasm-lib/kcl/src/ast/types.rs

@@ -24,7 +24,7 @@ use crate::{
     errors::{KclError, KclErrorDetails},
     executor::{
         BodyType, ExecutorContext, MemoryItem, Metadata, PipeInfo, ProgramMemory, SourceRange, StatementKind,
-        TagIdentifier, UserVal,
+        TagEngineInfo, TagIdentifier, UserVal,
     },
     parser::PIPE_OPERATOR,
     std::{kcl_stdlib::KclStdLibFn, FunctionKind},
@@ -1347,11 +1347,23 @@ impl CallExpression {
                         for value in &extrude_group.value {
                             if let Some(tag) = value.get_tag() {
                                 // Get the past tag and update it.
-                                let Some(t) = extrude_group.sketch_group.tags.get(&tag.name) else {
+                                let mut t = if let Some(t) = extrude_group.sketch_group.tags.get(&tag.name) {
-                                    return Err(KclError::Semantic(KclErrorDetails {
+                                    t.clone()
-                                        message: format!("Tag {} is not on sketch group", tag.name),
+                                } else {
-                                        source_ranges: vec![tag.into()],
+                                    // It's probably a fillet or a chamfer.
-                                    }));
+                                    // Initialize it.
+                                    TagIdentifier {
+                                        value: tag.name.clone(),
+                                        info: Some(TagEngineInfo {
+                                            id: value.get_id(),
+                                            surface: Some(value.clone()),
+                                            path: None,
+                                            sketch_group: extrude_group.id,
+                                        }),
+                                        meta: vec![Metadata {
+                                            source_range: tag.clone().into(),
+                                        }],
+                                    }
                                 };
 
                                 let Some(ref info) = t.info else {
@@ -1361,7 +1373,6 @@ impl CallExpression {
                                     }));
                                 };
 
-                                let mut t = t.clone();
                                 let mut info = info.clone();
                                 info.surface = Some(value.clone());
                                 t.info = Some(info);

src/wasm-lib/kcl/src/executor.rs

@@ -841,7 +841,7 @@ pub struct TagEngineInfo {
     /// The sketch group the tag is on.
     pub sketch_group: uuid::Uuid,
     /// The path the tag is on.
-    pub path: BasePath,
+    pub path: Option<BasePath>,
     /// The surface information for the tag.
     pub surface: Option<ExtrudeSurface>,
 }
@@ -916,7 +916,7 @@ impl SketchGroup {
         tag_identifier.info = Some(TagEngineInfo {
             id: base.geo_meta.id,
             sketch_group: self.id,
-            path: base.clone(),
+            path: Some(base.clone()),
             surface: None,
         });
 
@@ -1009,6 +1009,7 @@ pub enum FilletOrChamfer {
         radius: f64,
         /// The engine id of the edge to fillet.
         edge_id: uuid::Uuid,
+        tag: Box<Option<TagDeclarator>>,
     },
     /// A chamfer.
     Chamfer {
@@ -1038,7 +1039,7 @@ impl FilletOrChamfer {
 
     pub fn tag(&self) -> Option<TagDeclarator> {
         match self {
-            FilletOrChamfer::Fillet { .. } => None,
+            FilletOrChamfer::Fillet { tag, .. } => *tag.clone(),
             FilletOrChamfer::Chamfer { tag, .. } => *tag.clone(),
         }
     }
@@ -1326,6 +1327,36 @@ pub enum ExtrudeSurface {
     /// An extrude plane.
     ExtrudePlane(ExtrudePlane),
     ExtrudeArc(ExtrudeArc),
+    Chamfer(ChamferSurface),
+    Fillet(FilletSurface),
+}
+
+// Chamfer surface.
+#[derive(Debug, Clone, Deserialize, Serialize, PartialEq, ts_rs::TS, JsonSchema)]
+#[ts(export)]
+#[serde(rename_all = "camelCase")]
+pub struct ChamferSurface {
+    /// The id for the chamfer surface.
+    pub face_id: uuid::Uuid,
+    /// The tag.
+    pub tag: Option<TagDeclarator>,
+    /// Metadata.
+    #[serde(flatten)]
+    pub geo_meta: GeoMeta,
+}
+
+// Fillet surface.
+#[derive(Debug, Clone, Deserialize, Serialize, PartialEq, ts_rs::TS, JsonSchema)]
+#[ts(export)]
+#[serde(rename_all = "camelCase")]
+pub struct FilletSurface {
+    /// The id for the fillet surface.
+    pub face_id: uuid::Uuid,
+    /// The tag.
+    pub tag: Option<TagDeclarator>,
+    /// Metadata.
+    #[serde(flatten)]
+    pub geo_meta: GeoMeta,
 }
 
 /// An extruded plane.
@@ -1361,6 +1392,8 @@ impl ExtrudeSurface {
         match self {
             ExtrudeSurface::ExtrudePlane(ep) => ep.geo_meta.id,
             ExtrudeSurface::ExtrudeArc(ea) => ea.geo_meta.id,
+            ExtrudeSurface::Fillet(f) => f.geo_meta.id,
+            ExtrudeSurface::Chamfer(c) => c.geo_meta.id,
         }
     }
 
@@ -1368,6 +1401,8 @@ impl ExtrudeSurface {
         match self {
             ExtrudeSurface::ExtrudePlane(ep) => ep.tag.clone(),
             ExtrudeSurface::ExtrudeArc(ea) => ea.tag.clone(),
+            ExtrudeSurface::Fillet(f) => f.tag.clone(),
+            ExtrudeSurface::Chamfer(c) => c.tag.clone(),
         }
     }
 }

src/wasm-lib/kcl/src/std/args.rs

@@ -37,7 +37,7 @@ impl Args {
     }
 
     // Add a modeling command to the batch but don't fire it right away.
-    pub async fn batch_modeling_cmd(
+    pub(crate) async fn batch_modeling_cmd(
         &self,
         id: uuid::Uuid,
         cmd: kittycad::types::ModelingCmd,
@@ -48,7 +48,7 @@ impl Args {
     // Add a modeling command to the batch that gets executed at the end of the file.
     // This is good for something like fillet or chamfer where the engine would
     // eat the path id if we executed it right away.
-    pub async fn batch_end_cmd(
+    pub(crate) async fn batch_end_cmd(
         &self,
         id: uuid::Uuid,
         cmd: kittycad::types::ModelingCmd,
@@ -57,7 +57,7 @@ impl Args {
     }
 
     /// Send the modeling cmd and wait for the response.
-    pub async fn send_modeling_cmd(
+    pub(crate) async fn send_modeling_cmd(
         &self,
         id: uuid::Uuid,
         cmd: kittycad::types::ModelingCmd,
@@ -109,7 +109,8 @@ impl Args {
     }
 
     /// Flush just the fillets and chamfers for this specific ExtrudeGroupSet.
-    pub async fn flush_batch_for_extrude_group_set(
+    #[allow(clippy::vec_box)]
+    pub(crate) async fn flush_batch_for_extrude_group_set(
         &self,
         extrude_groups: Vec<Box<ExtrudeGroup>>,
     ) -> Result<(), KclError> {
@@ -176,7 +177,7 @@ impl Args {
         self.make_user_val_from_json(serde_json::Value::Number(serde_json::Number::from(n)))
     }
 
-    pub fn make_user_val_from_f64(&self, f: f64) -> Result<MemoryItem, KclError> {
+    pub(crate) fn make_user_val_from_f64(&self, f: f64) -> Result<MemoryItem, KclError> {
         self.make_user_val_from_json(serde_json::Value::Number(serde_json::Number::from_f64(f).ok_or_else(
             || {
                 KclError::Type(KclErrorDetails {
@@ -187,11 +188,11 @@ impl Args {
         )?))
     }
 
-    pub fn get_number(&self) -> Result<f64, KclError> {
+    pub(crate) fn get_number(&self) -> Result<f64, KclError> {
         FromArgs::from_args(self, 0)
     }
 
-    pub fn get_number_array(&self) -> Result<Vec<f64>, KclError> {
+    pub(crate) fn get_number_array(&self) -> Result<Vec<f64>, KclError> {
         let mut numbers: Vec<f64> = Vec::new();
         for arg in &self.args {
             let parsed = arg.get_json_value()?;
@@ -200,11 +201,11 @@ impl Args {
         Ok(numbers)
     }
 
-    pub fn get_pattern_transform_args(&self) -> Result<(u32, FnAsArg<'_>, ExtrudeGroupSet), KclError> {
+    pub(crate) fn get_pattern_transform_args(&self) -> Result<(u32, FnAsArg<'_>, ExtrudeGroupSet), KclError> {
         FromArgs::from_args(self, 0)
     }
 
-    pub fn get_hypotenuse_leg(&self) -> Result<(f64, f64), KclError> {
+    pub(crate) fn get_hypotenuse_leg(&self) -> Result<(f64, f64), KclError> {
         let numbers = self.get_number_array()?;
 
         if numbers.len() != 2 {
@@ -217,7 +218,7 @@ impl Args {
         Ok((numbers[0], numbers[1]))
     }
 
-    pub fn get_circle_args(
+    pub(crate) fn get_circle_args(
         &self,
     ) -> Result<
         (
@@ -231,51 +232,53 @@ impl Args {
         FromArgs::from_args(self, 0)
     }
 
-    pub fn get_sketch_groups(&self) -> Result<(SketchGroupSet, Box<SketchGroup>), KclError> {
+    pub(crate) fn get_sketch_groups(&self) -> Result<(SketchGroupSet, Box<SketchGroup>), KclError> {
         FromArgs::from_args(self, 0)
     }
 
-    pub fn get_sketch_group(&self) -> Result<Box<SketchGroup>, KclError> {
+    pub(crate) fn get_sketch_group(&self) -> Result<Box<SketchGroup>, KclError> {
         FromArgs::from_args(self, 0)
     }
 
-    pub fn get_data<'a, T>(&'a self) -> Result<T, KclError>
+    pub(crate) fn get_data<'a, T>(&'a self) -> Result<T, KclError>
     where
         T: FromArgs<'a> + serde::de::DeserializeOwned,
     {
         FromArgs::from_args(self, 0)
     }
 
-    pub fn get_import_data(&self) -> Result<(String, Option<crate::std::import::ImportFormat>), KclError> {
+    pub(crate) fn get_import_data(&self) -> Result<(String, Option<crate::std::import::ImportFormat>), KclError> {
         FromArgs::from_args(self, 0)
     }
 
-    pub fn get_sketch_group_and_optional_tag(&self) -> Result<(Box<SketchGroup>, Option<TagDeclarator>), KclError> {
+    pub(crate) fn get_sketch_group_and_optional_tag(
+        &self,
+    ) -> Result<(Box<SketchGroup>, Option<TagDeclarator>), KclError> {
         FromArgs::from_args(self, 0)
     }
 
-    pub fn get_data_and_optional_tag<'a, T>(&'a self) -> Result<(T, Option<FaceTag>), KclError>
+    pub(crate) fn get_data_and_optional_tag<'a, T>(&'a self) -> Result<(T, Option<FaceTag>), KclError>
     where
         T: serde::de::DeserializeOwned + FromMemoryItem<'a> + Sized,
     {
         FromArgs::from_args(self, 0)
     }
 
-    pub fn get_data_and_sketch_group<'a, T>(&'a self) -> Result<(T, Box<SketchGroup>), KclError>
+    pub(crate) fn get_data_and_sketch_group<'a, T>(&'a self) -> Result<(T, Box<SketchGroup>), KclError>
     where
         T: serde::de::DeserializeOwned + FromArgs<'a>,
     {
         FromArgs::from_args(self, 0)
     }
 
-    pub fn get_data_and_sketch_group_set<'a, T>(&'a self) -> Result<(T, SketchGroupSet), KclError>
+    pub(crate) fn get_data_and_sketch_group_set<'a, T>(&'a self) -> Result<(T, SketchGroupSet), KclError>
     where
         T: serde::de::DeserializeOwned + FromArgs<'a>,
     {
         FromArgs::from_args(self, 0)
     }
 
-    pub fn get_data_and_sketch_group_and_tag<'a, T>(
+    pub(crate) fn get_data_and_sketch_group_and_tag<'a, T>(
         &'a self,
     ) -> Result<(T, Box<SketchGroup>, Option<TagDeclarator>), KclError>
     where
@@ -284,28 +287,30 @@ impl Args {
         FromArgs::from_args(self, 0)
     }
 
-    pub fn get_data_and_sketch_surface<'a, T>(&'a self) -> Result<(T, SketchSurface, Option<TagDeclarator>), KclError>
+    pub(crate) fn get_data_and_sketch_surface<'a, T>(
+        &'a self,
+    ) -> Result<(T, SketchSurface, Option<TagDeclarator>), KclError>
     where
         T: serde::de::DeserializeOwned + FromMemoryItem<'a> + Sized,
     {
         FromArgs::from_args(self, 0)
     }
 
-    pub fn get_data_and_extrude_group_set<'a, T>(&'a self) -> Result<(T, ExtrudeGroupSet), KclError>
+    pub(crate) fn get_data_and_extrude_group_set<'a, T>(&'a self) -> Result<(T, ExtrudeGroupSet), KclError>
     where
         T: serde::de::DeserializeOwned + FromMemoryItem<'a> + Sized,
     {
         FromArgs::from_args(self, 0)
     }
 
-    pub fn get_data_and_extrude_group<'a, T>(&'a self) -> Result<(T, Box<ExtrudeGroup>), KclError>
+    pub(crate) fn get_data_and_extrude_group<'a, T>(&'a self) -> Result<(T, Box<ExtrudeGroup>), KclError>
     where
         T: serde::de::DeserializeOwned + FromMemoryItem<'a> + Sized,
     {
         FromArgs::from_args(self, 0)
     }
 
-    pub fn get_data_and_extrude_group_and_tag<'a, T>(
+    pub(crate) fn get_data_and_extrude_group_and_tag<'a, T>(
         &'a self,
     ) -> Result<(T, Box<ExtrudeGroup>, Option<TagDeclarator>), KclError>
     where
@@ -314,19 +319,15 @@ impl Args {
         FromArgs::from_args(self, 0)
     }
 
-    pub fn get_tag_and_extrude_group(&self) -> Result<(TagIdentifier, Box<ExtrudeGroup>), KclError> {
+    pub(crate) fn get_tag_to_number_sketch_group(&self) -> Result<(TagIdentifier, f64, Box<SketchGroup>), KclError> {
         FromArgs::from_args(self, 0)
     }
 
-    pub fn get_tag_to_number_sketch_group(&self) -> Result<(TagIdentifier, f64, Box<SketchGroup>), KclError> {
+    pub(crate) fn get_number_sketch_group_set(&self) -> Result<(f64, SketchGroupSet), KclError> {
         FromArgs::from_args(self, 0)
     }
 
-    pub fn get_number_sketch_group_set(&self) -> Result<(f64, SketchGroupSet), KclError> {
+    pub(crate) async fn get_adjacent_face_to_tag(
-        FromArgs::from_args(self, 0)
-    }
-
-    pub async fn get_adjacent_face_to_tag(
         &self,
         tag: &TagIdentifier,
         must_be_planar: bool,
@@ -375,29 +376,37 @@ impl Args {
                     None
                 }
             }
+            ExtrudeSurface::Chamfer(chamfer) => {
+                if let Some(chamfer_tag) = &chamfer.tag {
+                    if chamfer_tag.name == tag.value {
+                        Some(Ok(chamfer.face_id))
+                    } else {
+                        None
+                    }
+                } else {
+                    None
+                }
+            }
+            // The must be planar check must be called before the fillet check.
+            ExtrudeSurface::Fillet(_) if must_be_planar => Some(Err(KclError::Type(KclErrorDetails {
+                message: format!("Tag `{}` is a non-planar surface", tag.value),
+                source_ranges: vec![self.source_range],
+            }))),
+            ExtrudeSurface::Fillet(fillet) => {
+                if let Some(fillet_tag) = &fillet.tag {
+                    if fillet_tag.name == tag.value {
+                        Some(Ok(fillet.face_id))
+                    } else {
+                        None
+                    }
+                } else {
+                    None
+                }
+            }
         } {
             return face_from_surface;
         }
 
-        // A face could also be the result of a chamfer or fillet.
-        // TODO: come back to this.
-        /* if let Some(face_from_chamfer_fillet) = extrude_group.fillet_or_chamfers.iter().find_map(|fc| {
-            if let Some(ntag) = &fc.tag() {
-                if ntag.name == tag.value {
-                    Some(Ok(fc.id()))
-                } else {
-                    None
-                }
-            } else {
-                None
-            }
-        }) {
-            // We want to make sure we execute the fillet before this operation.
-            self.flush_batch_for_extrude_group_set(extrude_group.into()).await?;
-
-            return face_from_chamfer_fillet;
-        }*/
-
         // If we still haven't found the face, return an error.
         Err(KclError::Type(KclErrorDetails {
             message: format!("Expected a face with the tag `{}`", tag.value),

src/wasm-lib/kcl/src/std/chamfer.rs

@@ -9,7 +9,7 @@ use serde::{Deserialize, Serialize};
 use crate::{
     ast::types::TagDeclarator,
     errors::{KclError, KclErrorDetails},
-    executor::{ExtrudeGroup, FilletOrChamfer, MemoryItem},
+    executor::{ChamferSurface, ExtrudeGroup, ExtrudeSurface, FilletOrChamfer, GeoMeta, MemoryItem},
     std::{fillet::EdgeReference, Args},
 };
 
@@ -90,6 +90,7 @@ async fn inner_chamfer(
         }));
     }
 
+    let mut extrude_group = extrude_group.clone();
     let mut fillet_or_chamfers = Vec::new();
     for edge_tag in data.tags {
         let edge_id = match edge_tag {
@@ -116,9 +117,19 @@ async fn inner_chamfer(
             length: data.length,
             tag: Box::new(tag.clone()),
         });
+
+        if let Some(ref tag) = tag {
+            extrude_group.value.push(ExtrudeSurface::Chamfer(ChamferSurface {
+                face_id: edge_id,
+                tag: Some(tag.clone()),
+                geo_meta: GeoMeta {
+                    id,
+                    metadata: args.source_range.into(),
+                },
+            }));
+        }
     }
 
-    let mut extrude_group = extrude_group.clone();
     extrude_group.fillet_or_chamfers = fillet_or_chamfers;
 
     Ok(extrude_group)

src/wasm-lib/kcl/src/std/fillet.rs

@@ -8,8 +8,11 @@ use serde::{Deserialize, Serialize};
 use uuid::Uuid;
 
 use crate::{
+    ast::types::TagDeclarator,
     errors::{KclError, KclErrorDetails},
-    executor::{ExtrudeGroup, FilletOrChamfer, MemoryItem, TagIdentifier, UserVal},
+    executor::{
+        ExtrudeGroup, ExtrudeSurface, FilletOrChamfer, FilletSurface, GeoMeta, MemoryItem, TagIdentifier, UserVal,
+    },
     std::Args,
 };
 
@@ -39,9 +42,10 @@ pub enum EdgeReference {
 
 /// Create fillets on tagged paths.
 pub async fn fillet(args: Args) -> Result<MemoryItem, KclError> {
-    let (data, extrude_group): (FilletData, Box<ExtrudeGroup>) = args.get_data_and_extrude_group()?;
+    let (data, extrude_group, tag): (FilletData, Box<ExtrudeGroup>, Option<TagDeclarator>) =
+        args.get_data_and_extrude_group_and_tag()?;
 
-    let extrude_group = inner_fillet(data, extrude_group, args).await?;
+    let extrude_group = inner_fillet(data, extrude_group, tag, args).await?;
     Ok(MemoryItem::ExtrudeGroup(extrude_group))
 }
 
@@ -77,6 +81,7 @@ pub async fn fillet(args: Args) -> Result<MemoryItem, KclError> {
 async fn inner_fillet(
     data: FilletData,
     extrude_group: Box<ExtrudeGroup>,
+    tag: Option<TagDeclarator>,
     args: Args,
 ) -> Result<Box<ExtrudeGroup>, KclError> {
     // Check if tags contains any duplicate values.
@@ -90,9 +95,10 @@ async fn inner_fillet(
         }));
     }
 
+    let mut extrude_group = extrude_group.clone();
     let mut fillet_or_chamfers = Vec::new();
-    for tag in data.tags {
+    for edge_tag in data.tags {
-        let edge_id = match tag {
+        let edge_id = match edge_tag {
             EdgeReference::Uuid(uuid) => uuid,
             EdgeReference::Tag(edge_tag) => args.get_tag_engine_info(&edge_tag)?.id,
         };
@@ -114,10 +120,21 @@ async fn inner_fillet(
             id,
             edge_id,
             radius: data.radius,
+            tag: Box::new(tag.clone()),
         });
+
+        if let Some(ref tag) = tag {
+            extrude_group.value.push(ExtrudeSurface::Fillet(FilletSurface {
+                face_id: edge_id,
+                tag: Some(tag.clone()),
+                geo_meta: GeoMeta {
+                    id,
+                    metadata: args.source_range.into(),
+                },
+            }));
+        }
     }
 
-    let mut extrude_group = extrude_group.clone();
     extrude_group.fillet_or_chamfers = fillet_or_chamfers;
 
     Ok(extrude_group)

src/wasm-lib/kcl/src/std/segment.rs

@@ -36,8 +36,14 @@ pub async fn segment_end_x(args: Args) -> Result<MemoryItem, KclError> {
 }]
 fn inner_segment_end_x(tag: &TagIdentifier, args: Args) -> Result<f64, KclError> {
     let line = args.get_tag_engine_info(tag)?;
+    let path = line.path.clone().ok_or_else(|| {
+        KclError::Type(KclErrorDetails {
+            message: format!("Expected a line segment with a path, found `{:?}`", line),
+            source_ranges: vec![args.source_range],
+        })
+    })?;
 
-    Ok(line.path.to[0])
+    Ok(path.to[0])
 }
 
 /// Returns the segment end of y.
@@ -67,8 +73,14 @@ pub async fn segment_end_y(args: Args) -> Result<MemoryItem, KclError> {
 }]
 fn inner_segment_end_y(tag: &TagIdentifier, args: Args) -> Result<f64, KclError> {
     let line = args.get_tag_engine_info(tag)?;
+    let path = line.path.clone().ok_or_else(|| {
+        KclError::Type(KclErrorDetails {
+            message: format!("Expected a line segment with a path, found `{:?}`", line),
+            source_ranges: vec![args.source_range],
+        })
+    })?;
 
-    Ok(line.path.to[1])
+    Ok(path.to[1])
 }
 
 /// Returns the last segment of x.
@@ -188,8 +200,14 @@ pub async fn segment_length(args: Args) -> Result<MemoryItem, KclError> {
 }]
 fn inner_segment_length(tag: &TagIdentifier, args: Args) -> Result<f64, KclError> {
     let line = args.get_tag_engine_info(tag)?;
+    let path = line.path.clone().ok_or_else(|| {
+        KclError::Type(KclErrorDetails {
+            message: format!("Expected a line segment with a path, found `{:?}`", line),
+            source_ranges: vec![args.source_range],
+        })
+    })?;
 
-    let result = ((line.path.from[1] - line.path.to[1]).powi(2) + (line.path.from[0] - line.path.to[0]).powi(2)).sqrt();
+    let result = ((path.from[1] - path.to[1]).powi(2) + (path.from[0] - path.to[0]).powi(2)).sqrt();
 
     Ok(result)
 }
@@ -222,8 +240,14 @@ pub async fn segment_angle(args: Args) -> Result<MemoryItem, KclError> {
 }]
 fn inner_segment_angle(tag: &TagIdentifier, args: Args) -> Result<f64, KclError> {
     let line = args.get_tag_engine_info(tag)?;
+    let path = line.path.clone().ok_or_else(|| {
+        KclError::Type(KclErrorDetails {
+            message: format!("Expected a line segment with a path, found `{:?}`", line),
+            source_ranges: vec![args.source_range],
+        })
+    })?;
 
-    let result = between(line.path.from.into(), line.path.to.into());
+    let result = between(path.from.into(), path.to.into());
 
     Ok(result.degrees())
 }
@@ -259,8 +283,14 @@ fn inner_angle_to_match_length_x(
     args: Args,
 ) -> Result<f64, KclError> {
     let line = args.get_tag_engine_info(tag)?;
+    let path = line.path.clone().ok_or_else(|| {
+        KclError::Type(KclErrorDetails {
+            message: format!("Expected a line segment with a path, found `{:?}`", line),
+            source_ranges: vec![args.source_range],
+        })
+    })?;
 
-    let length = ((line.path.from[1] - line.path.to[1]).powi(2) + (line.path.from[0] - line.path.to[0]).powi(2)).sqrt();
+    let length = ((path.from[1] - path.to[1]).powi(2) + (path.from[0] - path.to[0]).powi(2)).sqrt();
 
     let last_line = sketch_group
         .value
@@ -319,8 +349,14 @@ fn inner_angle_to_match_length_y(
     args: Args,
 ) -> Result<f64, KclError> {
     let line = args.get_tag_engine_info(tag)?;
+    let path = line.path.clone().ok_or_else(|| {
+        KclError::Type(KclErrorDetails {
+            message: format!("Expected a line segment with a path, found `{:?}`", line),
+            source_ranges: vec![args.source_range],
+        })
+    })?;
 
-    let length = ((line.path.from[1] - line.path.to[1]).powi(2) + (line.path.from[0] - line.path.to[0]).powi(2)).sqrt();
+    let length = ((path.from[1] - path.to[1]).powi(2) + (path.from[0] - path.to[0]).powi(2)).sqrt();
 
     let last_line = sketch_group
         .value

src/wasm-lib/kcl/src/std/sketch.rs

@@ -739,10 +739,16 @@ async fn inner_angled_line_that_intersects(
     args: Args,
 ) -> Result<Box<SketchGroup>, KclError> {
     let intersect_path = args.get_tag_engine_info(&data.intersect_tag)?;
+    let path = intersect_path.path.clone().ok_or_else(|| {
+        KclError::Type(KclErrorDetails {
+            message: format!("Expected an intersect path with a path, found `{:?}`", intersect_path),
+            source_ranges: vec![args.source_range],
+        })
+    })?;
 
     let from = sketch_group.current_pen_position()?;
     let to = intersection_with_parallel_line(
-        &[intersect_path.path.from.into(), intersect_path.path.to.into()],
+        &[path.from.into(), path.to.into()],
         data.offset.unwrap_or_default(),
         data.angle,
         from,
@@ -1233,7 +1239,7 @@ pub(crate) async fn inner_start_profile_at(
             tag_identifier.info = Some(TagEngineInfo {
                 id: current_path.geo_meta.id,
                 sketch_group: path_id,
-                path: current_path.clone(),
+                path: Some(current_path.clone()),
                 surface: None,
             });
             HashMap::from([(tag.name.to_string(), tag_identifier)])

src/wasm-lib/tests/executor/main.rs

@@ -2471,7 +2471,7 @@ const part001 = cube([0,0], 20)
 }
 
 #[tokio::test(flavor = "multi_thread")]
-#[ignore] // Ignore until this is fixed in the engine: https://github.com/KittyCAD/engine/issues/2260
+// Will return an error until this is fixed in the engine: https://github.com/KittyCAD/engine/issues/2260
 async fn serial_test_sketch_on_face_of_chamfer() {
     let code = r#"fn cube = (pos, scale) => {
   const sg = startSketchOn('XY')
@@ -2490,7 +2490,7 @@ const part001 = cube([0,0], 20)
     tags: [getOppositeEdge(line1)]
   }, %, $chamfer1)
 
-const sketch001 = startSketchOn(part001, 'chamfer1')
+const sketch001 = startSketchOn(part001, chamfer1)
     |> startProfileAt([4.28, 3.83], %)
     |> line([2.17, -0.03], %)
     |> line([-0.07, -1.8], %)
@@ -2500,11 +2500,17 @@ const sketch001 = startSketchOn(part001, 'chamfer1')
     |> extrude(10, %)
 "#;
 
-    let result = execute_and_snapshot(code, UnitLength::Mm).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm).await;
-    twenty_twenty::assert_image(
+    /*twenty_twenty::assert_image(
         "tests/executor/outputs/sketch_on_face_of_chamfer.png",
         &result,
         MIN_DIFF,
+    );*/
+
+    assert!(result.is_err());
+    assert_eq!(
+        result.err().unwrap().to_string(),
+        r#"engine: KclErrorDetails { source_ranges: [SourceRange([410, 441])], message: "Modeling command failed: []" }"#
     );
 }