Updating KCL examples on docs (#2355)

* updating KCL examples on docs

* update images and docs

Signed-off-by: Jess Frazelle <github@jessfraz.com>

---------

Signed-off-by: Jess Frazelle <github@jessfraz.com>
Co-authored-by: Jess Frazelle <github@jessfraz.com>

docs/kcl/abs.md

@@ -19,7 +19,17 @@ abs(num: number) -> number
 ### Examples
 
 ```js
-const myVar = abs(-4)
+const myAngle = -120
+
+const sketch001 = startSketchOn('-XZ')
+  |> startProfileAt([0, 0], %)
+  |> line([8, 0], %)
+  |> angledLine({ angle: abs(myAngle), length: 5 }, %)
+  |> line([-5, 0], %)
+  |> angledLine({ angle: myAngle, length: 5 }, %)
+  |> close(%)
+
+const baseExtrusion = extrude(5, sketch001)
 ```
 
 ### Arguments

docs/kcl/std.json

@@ -29,7 +29,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "const myVar = abs(-4)"
+      "const myAngle = -120\n\nconst sketch001 = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> line([8, 0], %)\n  |> angledLine({ angle: abs(myAngle), length: 5 }, %)\n  |> line([-5, 0], %)\n  |> angledLine({ angle: myAngle, length: 5 }, %)\n  |> close(%)\n\nconst baseExtrusion = extrude(5, sketch001)"
     ]
   },
   {
@@ -1068,7 +1068,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "const part001 = startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> line([1, 3.82], %, 'seg01')\n  |> angledLineToX([\n       -angleToMatchLengthX('seg01', 10, %),\n       5\n     ], %)\n  |> close(%)\n  |> extrude(5, %)"
+      "const sketch001 = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> line([2, 5], %, 'seg01')\n  |> angledLineToX([\n       -angleToMatchLengthX('seg01', 7, %),\n       10\n     ], %)\n  |> close(%)\n\nconst extrusion = extrude(5, sketch001)"
     ]
   },
   {
@@ -2074,7 +2074,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "const part001 = startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> line([1, 3.82], %, 'seg01')\n  |> angledLineToX([\n       -angleToMatchLengthY('seg01', 10, %),\n       5\n     ], %)\n  |> close(%)\n  |> extrude(5, %)"
+      "const sketch001 = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> line([1, 2], %, 'seg01')\n  |> angledLine({\n       angle: angleToMatchLengthY('seg01', 15, %),\n       length: 5\n     }, %)\n  |> yLineTo(0, %)\n  |> close(%)\n\nconst extrusion = extrude(5, sketch001)"
     ]
   },
   {
@@ -4070,7 +4070,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> angledLine({ angle: 45, length: 10 }, %, \"edge1\")\n  |> line([10, 10], %)\n  |> line([0, 10], %)\n  |> close(%, \"edge2\")\n  |> extrude(10, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> yLineTo(15, %)\n  |> angledLine({ angle: 30, length: 15 }, %)\n  |> line([8, -10], %)\n  |> yLineTo(0, %)\n  |> close(%)\n\nconst example = extrude(10, exampleSketch)"
     ]
   },
   {
@@ -6066,7 +6066,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn('XZ')\n  |> startProfileAt([0, 0], %)\n  |> angledLineOfXLength({ angle: 45, length: 10 }, %, \"edge1\")\n  |> line([10, 10], %)\n  |> line([0, 10], %)\n  |> close(%, \"edge2\")\n  |> extrude(10, %)"
+      "const sketch001 = startSketchOn('XZ')\n  |> startProfileAt([0, 0], %)\n  |> angledLineOfXLength({ angle: 45, length: 10 }, %, \"edge1\")\n  |> angledLineOfXLength({ angle: -15, length: 20 }, %, \"edge2\")\n  |> line([0, -5], %)\n  |> close(%, \"edge3\")\n\nconst extrusion = extrude(10, sketch001)"
     ]
   },
   {
@@ -8062,7 +8062,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn('YZ')\n  |> startProfileAt([0, 0], %)\n  |> angledLineOfYLength({ angle: 45, length: 10 }, %, \"edge1\")\n  |> line([10, 10], %)\n  |> line([0, 10], %)\n  |> close(%, \"edge2\")\n  |> extrude(10, %)\n  |> fillet({ radius: 2, tags: [\"edge1\"] }, %)"
+      "const exampleSketch = startSketchOn('XZ')\n  |> startProfileAt([0, 0], %)\n  |> line([10, 0], %)\n  |> angledLineOfYLength({ angle: 45, length: 10 }, %)\n  |> line([0, 10], %)\n  |> angledLineOfYLength({ angle: 135, length: 10 }, %)\n  |> line([-10, 0], %)\n  |> line([0, -30], %)\n\nconst example = extrude(10, exampleSketch)"
     ]
   },
   {
@@ -10048,7 +10048,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "const part001 = startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> lineTo([2, 2], %, \"yo\")\n  |> lineTo([3, 1], %)\n  |> angledLineThatIntersects({\n       angle: 180,\n       intersectTag: 'yo',\n       offset: 12\n     }, %, \"yo2\")\n  |> line([4, 0], %)\n  |> close(%, \"yo3\")\n  |> extrude(10, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> lineTo([5, 10], %)\n  |> lineTo([-10, 10], %, \"lineToIntersect\")\n  |> lineTo([0, 20], %)\n  |> angledLineThatIntersects({\n       angle: 80,\n       intersectTag: 'lineToIntersect',\n       offset: 10\n     }, %)\n  |> close(%)\n\nconst example = extrude(10, exampleSketch)"
     ]
   },
   {
@@ -12029,7 +12029,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> angledLineToX({ angle: 45, to: 10 }, %, \"edge1\")\n  |> line([10, 10], %)\n  |> line([0, 10], %)\n  |> close(%, \"edge2\")\n  |> extrude(10, %)\n  |> fillet({ radius: 2, tags: [\"edge1\"] }, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> angledLineToX({ angle: 30, to: 10 }, %)\n  |> line([0, 10], %)\n  |> line([-10, 0], %)\n  |> close(%)\n\nconst example = extrude(10, exampleSketch)"
     ]
   },
   {
@@ -14010,7 +14010,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> angledLineToY({ angle: 45, to: 10 }, %, \"edge1\")\n  |> line([10, 10], %)\n  |> line([0, 10], %)\n  |> close(%, \"edge2\")\n  |> extrude(10, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> angledLineToY({ angle: 60, to: 20 }, %)\n  |> line([-20, 0], %)\n  |> angledLineToY({ angle: 70, to: 10 }, %)\n  |> close(%)\n\nconst example = extrude(10, exampleSketch)"
     ]
   },
   {
@@ -16038,7 +16038,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn('-YZ')\n  |> startProfileAt([0, 0], %)\n  |> arc({\n       angle_start: 0,\n       angle_end: 360,\n       radius: 10\n     }, %, \"edge1\")\n  |> extrude(10, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> line([10, 0], %)\n  |> arc({\n       angle_start: 0,\n       angle_end: 280,\n       radius: 16\n     }, %)\n  |> close(%)"
     ]
   },
   {
@@ -18106,7 +18106,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> bezierCurve({\n       to: [10, 10],\n       control1: [5, 0],\n       control2: [5, 10]\n     }, %, \"edge1\")\n  |> close(%)\n  |> extrude(10, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> line([0, 10], %)\n  |> bezierCurve({\n       to: [10, 10],\n       control1: [5, 0],\n       control2: [5, 10]\n     }, %)\n  |> lineTo([10, 0], %)\n  |> close(%)\n\nconst example = extrude(10, exampleSketch)"
     ]
   },
   {
@@ -20424,7 +20424,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "const circles = startSketchOn('XY')\n  |> circle([5, 5], 1, %)\n  |> patternLinear2d({\n       axis: [1, 1],\n       repetitions: 12,\n       distance: 3\n     }, %)\n\nconst rectangle = startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> line([0, 50], %)\n  |> line([50, 0], %)\n  |> line([0, -50], %)\n  |> close(%)\n  |> hole(circles, %)"
+      "const exampleSketch = startSketchOn(\"-XZ\")\n  |> circle([0, 0], 10, %)\n\nconst example = extrude(5, exampleSketch)"
     ]
   },
   {
@@ -22381,7 +22381,7 @@
     "deprecated": false,
     "examples": [
       "startSketchOn('XZ')\n  |> startProfileAt([0, 0], %)\n  |> line([10, 10], %)\n  |> line([10, 0], %)\n  |> close(%)\n  |> extrude(10, %)",
-      "startSketchOn('YZ')\n  |> startProfileAt([0, 0], %)\n  |> line([10, 10], %)\n  |> line([10, 0], %)\n  |> close(%, \"edge1\")\n  |> extrude(10, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> line([10, 0], %)\n  |> line([0, 10], %)\n  |> close(%)\n\nconst example = extrude(10, exampleSketch)"
     ]
   },
   {
@@ -25953,7 +25953,8 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> line([0, 10], %)\n  |> line([10, 0], %)\n  |> line([0, -10], %)\n  |> close(%)\n  |> extrude(5, %)"
+      "const example = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> line([10, 0], %)\n  |> arc({\n       angle_end: 0,\n       angle_start: 120,\n       radius: 5\n     }, %)\n  |> line([5, 0], %)\n  |> line([0, 10], %)\n  |> bezierCurve({\n       control1: [-10, 0],\n       control2: [2, 10],\n       to: [-5, 10]\n     }, %)\n  |> line([-5, -2], %)\n  |> close(%)\n  |> extrude(10, %)",
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([-10, 0], %)\n  |> arc({\n       angle_end: -60,\n       angle_start: 120,\n       radius: 5\n     }, %)\n  |> line([10, 0], %)\n  |> line([5, 0], %)\n  |> bezierCurve({\n       control1: [-3, 0],\n       control2: [2, 10],\n       to: [-5, 10]\n     }, %)\n  |> line([-4, 10], %)\n  |> line([-5, -2], %)\n  |> close(%)\n\nconst example = extrude(10, exampleSketch)"
     ]
   },
   {
@@ -27516,7 +27517,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "const part001 = startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> line([0, 10], %, \"thing\")\n  |> line([10, 0], %)\n  |> line([0, -10], %, \"thing2\")\n  |> close(%)\n  |> extrude(10, %)\n  |> fillet({ radius: 2, tags: [\"thing\", \"thing2\"] }, %)"
+      "const width = 20\nconst length = 10\nconst thickness = 1\nconst filletRadius = 2\n\nconst mountingPlateSketch = startSketchOn(\"XY\")\n  |> startProfileAt([-width / 2, -length / 2], %)\n  |> lineTo([width / 2, -length / 2], %, 'edge1')\n  |> lineTo([width / 2, length / 2], %, 'edge2')\n  |> lineTo([-width / 2, length / 2], %, 'edge3')\n  |> close(%, 'edge4')\n\nconst mountingPlate = extrude(thickness, mountingPlateSketch)\n  |> fillet({\n       radius: filletRadius,\n       tags: [\n         getNextAdjacentEdge('edge1', %),\n         getNextAdjacentEdge('edge2', %),\n         getNextAdjacentEdge('edge3', %),\n         getNextAdjacentEdge('edge4', %)\n       ]\n     }, %)"
     ]
   },
   {
@@ -28335,7 +28336,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "const box = startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> line([0, 10], %)\n  |> line([10, 0], %)\n  |> line([0, -10], %, 'revolveAxis')\n  |> close(%)\n  |> extrude(10, %)\n\nconst sketch001 = startSketchOn('XY')\n  |> startProfileAt([0, -10], %)\n  |> line([0, -10], %)\n  |> line([2, 0], %)\n  |> line([0, 10], %)\n  |> close(%)\n  |> revolve({\n       axis: getEdge('revolveAxis', box),\n       angle: 90\n     }, %)"
+      "const box = startSketchOn('XZ')\n  |> startProfileAt([0, 0], %)\n  |> line([0, 10], %, 'revolveAxis')\n  |> line([10, 0], %)\n  |> line([0, -10], %)\n  |> close(%)\n  |> extrude(10, %)\n\nconst revolution = startSketchOn('XZ')\n  |> startProfileAt([-10, 0], %)\n  |> line([0, 10], %)\n  |> line([2, 0], %)\n  |> line([0, -10], %)\n  |> close(%)\n  |> revolve({\n       axis: getEdge('revolveAxis', box),\n       angle: 90\n     }, %)"
     ]
   },
   {
@@ -29121,7 +29122,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "const part001 = startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> line([0, 10], %, \"thing\")\n  |> line([10, 0], %, \"thing1\")\n  |> line([0, -10], %, \"thing2\")\n  |> close(%, \"thing3\")\n  |> extrude(10, %)\n  |> fillet({\n       radius: 2,\n       tags: [getNextAdjacentEdge(\"thing3\", %)]\n     }, %)"
+      "const exampleSketch = startSketchOn('XZ')\n  |> startProfileAt([0, 0], %)\n  |> line([10, 0], %)\n  |> angledLine({ angle: 60, length: 10 }, %)\n  |> angledLine({ angle: 120, length: 10 }, %)\n  |> line([-10, 0], %)\n  |> angledLine({ angle: 240, length: 10 }, %, 'referenceEdge')\n  |> close(%)\n\nconst example = extrude(5, exampleSketch)\n  |> fillet({\n       radius: 3,\n       tags: [\n         getNextAdjacentEdge(\"referenceEdge\", %)\n       ]\n     }, %)"
     ]
   },
   {
@@ -29907,7 +29908,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "const part001 = startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> line([0, 10], %, \"thing\")\n  |> line([10, 0], %)\n  |> line([0, -10], %, \"thing2\")\n  |> close(%)\n  |> extrude(10, %)\n  |> fillet({\n       radius: 2,\n       tags: [\"thing\", getOppositeEdge(\"thing\", %)]\n     }, %)"
+      "const exampleSketch = startSketchOn('XZ')\n  |> startProfileAt([0, 0], %)\n  |> line([10, 0], %)\n  |> angledLine({ angle: 60, length: 10 }, %)\n  |> angledLine({ angle: 120, length: 10 }, %)\n  |> line([-10, 0], %)\n  |> angledLine({ angle: 240, length: 10 }, %, 'referenceEdge')\n  |> close(%)\n\nconst example = extrude(5, exampleSketch)\n  |> fillet({\n       radius: 3,\n       tags: [getOppositeEdge(\"referenceEdge\", %)]\n     }, %)"
     ]
   },
   {
@@ -30693,7 +30694,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "const part001 = startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> line([0, 10], %, \"thing\")\n  |> line([10, 0], %, \"thing1\")\n  |> line([0, -10], %, \"thing2\")\n  |> close(%, \"thing3\")\n  |> extrude(10, %)\n  |> fillet({\n       radius: 2,\n       tags: [getPreviousAdjacentEdge(\"thing3\", %)]\n     }, %)"
+      "const exampleSketch = startSketchOn('XZ')\n  |> startProfileAt([0, 0], %)\n  |> line([10, 0], %)\n  |> angledLine({ angle: 60, length: 10 }, %)\n  |> angledLine({ angle: 120, length: 10 }, %)\n  |> line([-10, 0], %)\n  |> angledLine({ angle: 240, length: 10 }, %, 'referenceEdge')\n  |> close(%)\n\nconst example = extrude(5, exampleSketch)\n  |> fillet({\n       radius: 3,\n       tags: [\n         getPreviousAdjacentEdge(\"referenceEdge\", %)\n       ]\n     }, %)"
     ]
   },
   {
@@ -32254,7 +32255,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "const part001 = startSketchOn('XY')\n  |> circle([5, 5], 10, %)\n  |> extrude(10, %)\n  |> helix({ revolutions: 16, angle_start: 0 }, %)"
+      "const part001 = startSketchOn('XY')\n  |> circle([5, 5], 10, %)\n  |> extrude(10, %)\n  |> helix({\n       angle_start: 0,\n       ccw: true,\n       revolutions: 16,\n       angle_start: 0\n     }, %)"
     ]
   },
   {
@@ -36159,7 +36160,8 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "const square = startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> line([0, 10], %)\n  |> line([10, 0], %)\n  |> line([0, -10], %)\n  |> close(%)\n  |> hole(circle([2, 2], .5, %), %)\n  |> hole(circle([2, 8], .5, %), %)\n  |> extrude(2, %)"
+      "const exampleSketch = startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> line([0, 5], %)\n  |> line([5, 0], %)\n  |> line([0, -5], %)\n  |> close(%)\n  |> hole(circle([1, 1], .25, %), %)\n  |> hole(circle([1, 4], .25, %), %)\n\nconst example = extrude(1, exampleSketch)",
+      "fn squareHoleSketch = () => {\n  const squareSketch = startSketchOn('-XZ')\n    |> startProfileAt([-1, -1], %)\n    |> line([2, 0], %)\n    |> line([0, 2], %)\n    |> line([-2, 0], %)\n    |> close(%)\n  return squareSketch\n}\n\nconst exampleSketch = startSketchOn('-XZ')\n  |> circle([0, 0], 3, %)\n  |> hole(squareHoleSketch(), %)"
     ]
   },
   {
@@ -37807,7 +37809,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn(\"YZ\")\n  |> startProfileAt([0, 0], %)\n  |> line([5, 0], %, \"thing\")\n  |> line([5, 5], %)\n  |> line([0, lastSegX(%)], %)\n  |> close(%)\n  |> extrude(5, %)"
+      "const exampleSketch = startSketchOn(\"-XZ\")\n  |> startProfileAt([0, 0], %)\n  |> line([5, 0], %)\n  |> line([20, 5], %)\n  |> line([0, lastSegX(%)], %)\n  |> line([-15, 0], %)\n  |> close(%)\n\nconst example = extrude(5, exampleSketch)"
     ]
   },
   {
@@ -38796,7 +38798,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn(\"YZ\")\n  |> startProfileAt([0, 0], %)\n  |> line([5, 0], %, \"thing\")\n  |> line([5, 5], %)\n  |> line([0, lastSegY(%)], %)\n  |> close(%)\n  |> extrude(5, %)"
+      "const exampleSketch = startSketchOn(\"-XZ\")\n  |> startProfileAt([0, 0], %)\n  |> line([5, 0], %)\n  |> line([20, 5], %)\n  |> line([0, lastSegY(%)], %)\n  |> line([-15, 0], %)\n  |> close(%)\n\nconst example = extrude(5, exampleSketch)"
     ]
   },
   {
@@ -40892,7 +40894,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn('-XY')\n  |> startProfileAt([0, 0], %)\n  |> line([10, 10], %)\n  |> line([20, 10], %, \"edge1\")\n  |> close(%, \"edge2\")\n  |> extrude(10, %)"
+      "const exampleSketch = startSketchOn(\"-XZ\")\n  |> startProfileAt([0, 0], %)\n  |> line([10, 0], %)\n  |> line([0, 10], %)\n  |> line([-10, 0], %)\n  |> close(%)\n\nconst example = extrude(5, exampleSketch)"
     ]
   },
   {
@@ -42862,7 +42864,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "fn rectShape = (pos, w, l) => {\n  const rr = startSketchOn('YZ')\n    |> startProfileAt([pos[0] - (w / 2), pos[1] - (l / 2)], %)\n    |> lineTo([pos[0] + w / 2, pos[1] - (l / 2)], %, \"edge1\")\n    |> lineTo([pos[0] + w / 2, pos[1] + l / 2], %, \"edge2\")\n    |> lineTo([pos[0] - (w / 2), pos[1] + l / 2], %, \"edge3\")\n    |> close(%, \"edge4\")\n  return rr\n}\n\n// Create the mounting plate extrusion, holes, and fillets\nconst part = rectShape([0, 0], 20, 20)\n  |> extrude(10, %)"
+      "const exampleSketch = startSketchOn(\"-XZ\")\n  |> startProfileAt([0, 0], %)\n  |> lineTo([10, 0], %)\n  |> lineTo([0, 10], %)\n  |> lineTo([-10, 0], %)\n  |> close(%)\n\nconst example = extrude(5, exampleSketch)"
     ]
   },
   {
@@ -45067,7 +45069,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "const part = startSketchOn('XY')\n  |> circle([0, 0], 2, %)\n  |> patternCircular2d({\n       center: [20, 20],\n       repetitions: 12,\n       arcDegrees: 210,\n       rotateDuplicates: true\n     }, %)\n  |> extrude(1, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([.5, 25], %)\n  |> line([0, 5], %)\n  |> line([-1, 0], %)\n  |> line([0, -5], %)\n  |> close(%)\n  |> patternCircular2d({\n       center: [0, 0],\n       repetitions: 12,\n       arcDegrees: 360,\n       rotateDuplicates: true\n     }, %)\n\nconst example = extrude(1, exampleSketch)"
     ]
   },
   {
@@ -46648,7 +46650,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "const part = startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> line([0, 1], %)\n  |> line([1, 0], %)\n  |> line([0, -1], %)\n  |> close(%)\n  |> extrude(1, %)\n  |> patternCircular3d({\n       axis: [1, 1, 0],\n       center: [10, 0, 10],\n       repetitions: 10,\n       arcDegrees: 360,\n       rotateDuplicates: true\n     }, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> circle([0, 0], 1, %)\n\nconst example = extrude(-5, exampleSketch)\n  |> patternCircular3d({\n       axis: [1, -1, 0],\n       center: [10, -20, 0],\n       repetitions: 10,\n       arcDegrees: 360,\n       rotateDuplicates: true\n     }, %)"
     ]
   },
   {
@@ -49626,7 +49628,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "const part = startSketchOn('XY')\n  |> circle([0, 0], 2, %)\n  |> patternLinear2d({\n       axis: [0, 1],\n       repetitions: 12,\n       distance: 2\n     }, %)\n  |> extrude(1, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> circle([0, 0], 1, %)\n  |> patternLinear2d({\n       axis: [1, 0],\n       repetitions: 6,\n       distance: 4\n     }, %)\n\nconst example = extrude(1, exampleSketch)"
     ]
   },
   {
@@ -51191,7 +51193,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "const part = startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> line([0, 1], %)\n  |> line([1, 0], %)\n  |> line([0, -1], %)\n  |> close(%)\n  |> extrude(1, %)\n  |> patternLinear3d({\n       axis: [1, 0, 1],\n       repetitions: 3,\n       distance: 6\n     }, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> line([0, 2], %)\n  |> line([3, 1], %)\n  |> line([0, -4], %)\n  |> close(%)\n\nconst example = extrude(1, exampleSketch)\n  |> patternLinear3d({\n       axis: [1, 0, 1],\n       repetitions: 6,\n       distance: 6\n     }, %)"
     ]
   },
   {
@@ -54119,7 +54121,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "const part001 = startSketchOn('XY')\n  |> startProfileAt([4.83, 12.56], %)\n  |> line([15.1, 2.48], %)\n  |> line([3.15, -9.85], %, 'seg01')\n  |> line([-15.17, -4.1], %)\n  |> angledLine([segAng('seg01', %), 12.35], %)\n  |> line([-13.02, 10.03], %)\n  |> close(%)\n  |> extrude(4, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> line([10, 0], %)\n  |> line([5, 10], %, 'seg01')\n  |> line([-10, 0], %)\n  |> angledLine([segAng('seg01', %), 10], %)\n  |> line([-10, 0], %)\n  |> angledLine([segAng('seg01', %), -15], %)\n  |> close(%)\n\nconst example = extrude(4, exampleSketch)"
     ]
   },
   {
@@ -55116,7 +55118,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn(\"YZ\")\n  |> startProfileAt([0, 0], %)\n  |> line([5, 0], %, \"thing\")\n  |> line([5, 5], %)\n  |> line([segEndX(\"thing\", %), 5], %)\n  |> close(%)\n  |> extrude(5, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> line([20, 0], %, \"thing\")\n  |> line([0, 5], %)\n  |> line([segEndX(\"thing\", %), 0], %)\n  |> line([-20, 10], %)\n  |> close(%)\n\nconst example = extrude(5, exampleSketch)"
     ]
   },
   {
@@ -56113,7 +56115,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn(\"YZ\")\n  |> startProfileAt([0, 0], %)\n  |> line([5, 0], %, \"thing\")\n  |> line([5, 5], %)\n  |> line([segEndY(\"thing\", %), 5], %)\n  |> close(%)\n  |> extrude(5, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> line([20, 0], %)\n  |> line([0, 3], %, \"thing\")\n  |> line([-10, 0], %)\n  |> line([0, segEndY(\"thing\", %)], %)\n  |> line([-10, 0], %)\n  |> close(%)\n\nconst example = extrude(5, exampleSketch)"
     ]
   },
   {
@@ -57110,7 +57112,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn(\"YZ\")\n  |> startProfileAt([0, 0], %)\n  |> line([5, 0], %, \"thing\")\n  |> line([5, 5], %)\n  |> line([0, segLen(\"thing\", %)], %)\n  |> close(%)\n  |> extrude(5, %)"
+      "const exampleSketch = startSketchOn(\"-XZ\")\n  |> startProfileAt([0, 0], %)\n  |> angledLine({ angle: 60, length: 10 }, %, \"thing\")\n  |> tangentialArc({ offset: -120, radius: 5 }, %)\n  |> angledLine({\n       angle: -60,\n       length: segLen(\"thing\", %)\n     }, %)\n  |> close(%)\n\nconst example = extrude(5, exampleSketch)"
     ]
   },
   {
@@ -58485,7 +58487,9 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> line([10, 10], %)\n  |> line([10, 0], %)\n  |> close(%)\n  |> extrude(10, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> line([10, 0], %)\n  |> line([0, 10], %)\n  |> line([-10, 0], %)\n  |> close(%)\n\nconst example = extrude(5, exampleSketch)",
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([10, 10], %)\n  |> line([10, 0], %)\n  |> line([0, 10], %)\n  |> line([-10, 0], %)\n  |> close(%)\n\nconst example = extrude(5, exampleSketch)",
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([-10, 23], %)\n  |> line([10, 0], %)\n  |> line([0, 10], %)\n  |> line([-10, 0], %)\n  |> close(%)\n\nconst example = extrude(5, exampleSketch)"
     ]
   },
   {
@@ -59479,7 +59483,9 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchAt([0, 0])\n  |> line([10, 10], %)\n  |> line([20, 10], %, \"edge1\")\n  |> close(%, \"edge2\")\n  |> extrude(10, %)"
+      "const exampleSketch = startSketchAt([0, 0])\n  |> line([10, 0], %)\n  |> line([0, 10], %)\n  |> line([-10, 0], %)\n  |> close(%)\n\nconst example = extrude(5, exampleSketch)",
+      "const exampleSketch = startSketchAt([10, 10])\n  |> line([10, 0], %)\n  |> line([0, 10], %)\n  |> line([-10, 0], %)\n  |> close(%)\n\nconst example = extrude(5, exampleSketch)",
+      "const exampleSketch = startSketchAt([-10, 23])\n  |> line([10, 0], %)\n  |> line([0, 10], %)\n  |> line([-10, 0], %)\n  |> close(%)\n\nconst example = extrude(5, exampleSketch)"
     ]
   },
   {
@@ -60752,8 +60758,9 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> line([10, 10], %)\n  |> line([20, 10], %, \"edge1\")\n  |> close(%, \"edge2\")\n  |> extrude(10, %)",
-      "fn cube = (pos, scale) => {\n  const sg = startSketchOn('XY')\n    |> startProfileAt(pos, %)\n    |> line([0, scale], %)\n    |> line([scale, 0], %)\n    |> line([0, -scale], %)\n    |> close(%)\n    |> extrude(scale, %)\n\n  return sg\n}\n\nconst box = cube([0, 0], 20)\n\nconst part001 = startSketchOn(box, \"start\")\n  |> startProfileAt([0, 0], %)\n  |> line([10, 10], %)\n  |> line([20, 10], %, \"edge1\")\n  |> close(%)\n  |> extrude(20, %)"
+      "const exampleSketch = startSketchOn(\"XY\")\n  |> startProfileAt([0, 0], %)\n  |> line([10, 0], %)\n  |> line([0, 10], %)\n  |> line([-10, 0], %)\n  |> close(%)\n\nconst example = extrude(5, exampleSketch)\n\nconst exampleSketch002 = startSketchOn(example, 'end')\n  |> startProfileAt([1, 1], %)\n  |> line([8, 0], %)\n  |> line([0, 8], %)\n  |> line([-8, 0], %)\n  |> close(%)\n\nconst example002 = extrude(5, exampleSketch002)\n\nconst exampleSketch003 = startSketchOn(example002, 'end')\n  |> startProfileAt([2, 2], %)\n  |> line([6, 0], %)\n  |> line([0, 6], %)\n  |> line([-6, 0], %)\n  |> close(%)\n\nconst example003 = extrude(5, exampleSketch003)",
+      "const exampleSketch = startSketchOn(\"XY\")\n  |> startProfileAt([0, 0], %)\n  |> line([10, 0], %)\n  |> line([0, 10], %, 'sketchingFace')\n  |> line([-10, 0], %)\n  |> close(%)\n\nconst example = extrude(10, exampleSketch)\n\nconst exampleSketch002 = startSketchOn(example, 'sketchingFace')\n  |> startProfileAt([1, 1], %)\n  |> line([8, 0], %)\n  |> line([0, 8], %)\n  |> line([-8, 0], %)\n  |> close(%, 'sketchingFace002')\n\nconst example002 = extrude(10, exampleSketch002)\n\nconst exampleSketch003 = startSketchOn(example002, 'sketchingFace002')\n  |> startProfileAt([-8, 12], %)\n  |> line([0, 6], %)\n  |> line([6, 0], %)\n  |> line([0, -6], %)\n  |> close(%)\n\nconst example003 = extrude(5, exampleSketch003)",
+      "const exampleSketch = startSketchOn('XY')\n  |> startProfileAt([4, 12], %)\n  |> line([2, 0], %)\n  |> line([0, -6], %)\n  |> line([4, -6], %)\n  |> line([0, -6], %)\n  |> line([-3.75, -4.5], %)\n  |> line([0, -5.5], %)\n  |> line([-2, 0], %)\n  |> close(%)\n\nconst example = revolve({ axis: 'y', angle: 180 }, exampleSketch)\n\nconst exampleSketch002 = startSketchOn(example, 'end')\n  |> startProfileAt([4.5, -5], %)\n  |> line([0, 5], %)\n  |> line([5, 0], %)\n  |> line([0, -5], %)\n  |> close(%)\n\nconst example002 = extrude(5, exampleSketch002)"
     ]
   },
   {
@@ -62781,7 +62788,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn('-YZ')\n  |> startProfileAt([0, 0], %)\n  |> line([10, 10], %, \"edge1\")\n  |> tangentialArc({ radius: 10, offset: 90 }, %, \"edge1\")\n  |> close(%)\n  |> extrude(10, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> angledLine({ angle: 60, length: 10 }, %)\n  |> tangentialArc({ radius: 10, offset: -120 }, %)\n  |> angledLine({ angle: -60, length: 10 }, %)\n  |> close(%)\n\nconst example = extrude(10, exampleSketch)"
     ]
   },
   {
@@ -64751,7 +64758,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn('-YZ')\n  |> startProfileAt([0, 0], %)\n  |> line([10, 10], %, \"edge0\")\n  |> tangentialArcTo([10, 0], %)\n  |> close(%)\n  |> extrude(10, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> angledLine({ angle: 60, length: 10 }, %)\n  |> tangentialArcTo([15, 15], %)\n  |> line([10, -15], %)\n  |> close(%)\n\nconst example = extrude(10, exampleSketch)"
     ]
   },
   {
@@ -66805,7 +66812,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn('YZ')\n  |> startProfileAt([0, 0], %)\n  |> xLine(10, %)\n  |> line([10, 10], %)\n  |> close(%, \"edge1\")\n  |> extrude(10, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> xLine(15, %)\n  |> angledLine({ angle: 80, length: 15 }, %)\n  |> line([8, -10], %)\n  |> xLine(10, %)\n  |> angledLine({ angle: 120, length: 30 }, %)\n  |> xLine(-15, %)\n  |> close(%)\n\nconst example = extrude(10, exampleSketch)"
     ]
   },
   {
@@ -68770,7 +68777,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> xLineTo(10, %, \"edge1\")\n  |> line([10, 10], %)\n  |> close(%, \"edge2\")\n  |> extrude(10, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> xLineTo(15, %)\n  |> angledLine({ angle: 80, length: 15 }, %)\n  |> line([8, -10], %)\n  |> xLineTo(40, %)\n  |> angledLine({ angle: 135, length: 30 }, %)\n  |> xLineTo(10, %)\n  |> close(%)\n\nconst example = extrude(10, exampleSketch)"
     ]
   },
   {
@@ -70735,7 +70742,7 @@
     "unpublished": false,
     "deprecated": false,
     "examples": [
-      "startSketchOn('XY')\n  |> startProfileAt([0, 0], %)\n  |> yLine(10, %)\n  |> line([10, 10], %)\n  |> close(%, \"edge1\")\n  |> extrude(10, %)"
+      "const exampleSketch = startSketchOn('-XZ')\n  |> startProfileAt([0, 0], %)\n  |> yLine(15, %)\n  |> angledLine({ angle: 30, length: 15 }, %)\n  |> line([8, -10], %)\n  |> yLine(-5, %)\n  |> close(%)\n\nconst example = extrude(10, exampleSketch)"
     ]
   },
   {

src/wasm-lib/kcl/src/std/extrude.rs

@@ -29,13 +29,46 @@ pub async fn extrude(args: Args) -> Result<MemoryItem, KclError> {
 /// Extrudes by a given amount.
 ///
 /// ```no_run
-/// startSketchOn('XY')
+/// const example = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
-///     |> line([0, 10], %)
 ///   |> line([10, 0], %)
-///     |> line([0, -10], %)
+///   |> arc({
+///     angle_end: 0,
+///     angle_start: 120,
+///     radius: 5,
+///   }, %)
+///   |> line([5, 0], %)
+///   |> line([0, 10], %)
+///   |> bezierCurve({
+///     control1: [-10, 0],
+///     control2: [2, 10],
+///     to: [-5, 10],
+///   }, %)
+///   |> line([-5, -2], %)
 ///   |> close(%)
-///     |> extrude(5, %)
+///   |> extrude(10, %)
+/// ```
+///
+/// ```no_run
+/// const exampleSketch = startSketchOn('-XZ')
+///   |> startProfileAt([-10, 0], %)
+///   |> arc({
+///     angle_end: -60,
+///     angle_start: 120,
+///     radius: 5,
+///   }, %)
+///   |> line([10, 0], %)
+///   |> line([5, 0], %)
+///   |> bezierCurve({
+///     control1: [-3, 0],
+///     control2: [2, 10],
+///     to: [-5, 10],
+///   }, %)
+///   |> line([-4, 10], %)
+///   |> line([-5, -2], %)
+///   |> close(%)
+///
+/// const example = extrude(10, exampleSketch)
 /// ```
 #[stdlib {
     name = "extrude"

src/wasm-lib/kcl/src/std/fillet.rs

@@ -48,14 +48,28 @@ pub async fn fillet(args: Args) -> Result<MemoryItem, KclError> {
 /// Create fillets on tagged paths.
 ///
 /// ```no_run
-/// const part001 = startSketchOn('XY')
-///     |> startProfileAt([0,0], %)
-///     |> line([0, 10], %, "thing")
-///     |> line([10, 0], %)
-///     |> line([0, -10], %, "thing2")
-///     |> close(%)
-///     |> extrude(10, %)
-///     |> fillet({radius: 2, tags: ["thing", "thing2"]}, %)
+/// const width = 20
+/// const length = 10
+/// const thickness = 1
+/// const filletRadius = 2
+///
+/// const mountingPlateSketch = startSketchOn("XY")
+///   |> startProfileAt([-width/2, -length/2], %)
+///   |> lineTo([width/2, -length/2], %, 'edge1')
+///   |> lineTo([width/2, length/2], %, 'edge2')
+///   |> lineTo([-width/2, length/2], %, 'edge3')
+///   |> close(%, 'edge4')
+///
+/// const mountingPlate = extrude(thickness, mountingPlateSketch)
+///   |> fillet({
+///     radius: filletRadius,
+///     tags: [
+///       getNextAdjacentEdge('edge1', %),
+///       getNextAdjacentEdge('edge2', %),
+///       getNextAdjacentEdge('edge3', %),
+///       getNextAdjacentEdge('edge4', %)
+///     ],
+///   }, %)
 /// ```
 #[stdlib {
     name = "fillet",
@@ -130,14 +144,29 @@ pub async fn get_opposite_edge(args: Args) -> Result<MemoryItem, KclError> {
 /// Get the opposite edge to the edge given.
 ///
 /// ```no_run
-/// const part001 = startSketchOn('XY')
-///     |> startProfileAt([0,0], %)
-///     |> line([0, 10], %, "thing")
+/// const exampleSketch = startSketchOn('XZ')
+///   |> startProfileAt([0, 0], %)
 ///   |> line([10, 0], %)
-///     |> line([0, -10], %, "thing2")
+///   |> angledLine({
+///     angle: 60,
+///     length: 10,
+///   }, %)
+///   |> angledLine({
+///     angle: 120,
+///     length: 10,
+///   }, %)
+///   |> line([-10, 0], %)
+///   |> angledLine({
+///     angle: 240,
+///     length: 10,
+///   }, %, 'referenceEdge')
 ///   |> close(%)
-///     |> extrude(10, %)
-///     |> fillet({radius: 2, tags: ["thing", getOppositeEdge("thing", %)]}, %)
+///
+/// const example = extrude(5, exampleSketch)
+///   |> fillet({
+///     radius: 3,
+///     tags: [getOppositeEdge("referenceEdge", %)],
+///   }, %)
 /// ```
 #[stdlib {
     name = "getOppositeEdge",
@@ -199,14 +228,29 @@ pub async fn get_next_adjacent_edge(args: Args) -> Result<MemoryItem, KclError>
 /// Get the next adjacent edge to the edge given.
 ///
 /// ```no_run
-/// const part001 = startSketchOn('XY')
-///     |> startProfileAt([0,0], %)
-///     |> line([0, 10], %, "thing")
-///     |> line([10, 0], %, "thing1")
-///     |> line([0, -10], %, "thing2")
-///     |> close(%, "thing3")
-///     |> extrude(10, %)
-///     |> fillet({radius: 2, tags: [getNextAdjacentEdge("thing3", %)]}, %)
+/// const exampleSketch = startSketchOn('XZ')
+///   |> startProfileAt([0, 0], %)
+///   |> line([10, 0], %)
+///   |> angledLine({
+///     angle: 60,
+///     length: 10,
+///   }, %)
+///   |> angledLine({
+///     angle: 120,
+///     length: 10,
+///   }, %)
+///   |> line([-10, 0], %)
+///   |> angledLine({
+///     angle: 240,
+///     length: 10,
+///   }, %, 'referenceEdge')
+///   |> close(%)
+///
+/// const example = extrude(5, exampleSketch)
+///   |> fillet({
+///     radius: 3,
+///     tags: [getNextAdjacentEdge("referenceEdge", %)],
+///   }, %)
 /// ```
 #[stdlib {
     name = "getNextAdjacentEdge",
@@ -277,14 +321,29 @@ pub async fn get_previous_adjacent_edge(args: Args) -> Result<MemoryItem, KclErr
 /// Get the previous adjacent edge to the edge given.
 ///
 /// ```no_run
-/// const part001 = startSketchOn('XY')
-///     |> startProfileAt([0,0], %)
-///     |> line([0, 10], %, "thing")
-///     |> line([10, 0], %, "thing1")
-///     |> line([0, -10], %, "thing2")
-///     |> close(%, "thing3")
-///     |> extrude(10, %)
-///     |> fillet({radius: 2, tags: [getPreviousAdjacentEdge("thing3", %)]}, %)
+/// const exampleSketch = startSketchOn('XZ')
+///   |> startProfileAt([0, 0], %)
+///   |> line([10, 0], %)
+///   |> angledLine({
+///     angle: 60,
+///     length: 10,
+///   }, %)
+///   |> angledLine({
+///     angle: 120,
+///     length: 10,
+///   }, %)
+///   |> line([-10, 0], %)
+///   |> angledLine({
+///     angle: 240,
+///     length: 10,
+///   }, %, 'referenceEdge')
+///   |> close(%)
+///
+/// const example = extrude(5, exampleSketch)
+///   |> fillet({
+///     radius: 3,
+///     tags: [getPreviousAdjacentEdge("referenceEdge", %)],
+///   }, %)
 /// ```
 #[stdlib {
     name = "getPreviousAdjacentEdge",

src/wasm-lib/kcl/src/std/helix.rs

@@ -43,7 +43,12 @@ pub async fn helix(args: Args) -> Result<MemoryItem, KclError> {
 /// const part001 = startSketchOn('XY')
 ///   |> circle([5, 5], 10, %)
 ///   |> extrude(10, %)
-///     |> helix({revolutions: 16, angle_start: 0}, %)
+///   |> helix({
+///     angle_start: 0,
+///     ccw: true,
+///     revolutions: 16,
+///     angle_start: 0
+///  }, %)
 /// ```
 #[stdlib {
     name = "helix",

src/wasm-lib/kcl/src/std/math.rs

@@ -125,7 +125,23 @@ pub async fn abs(args: Args) -> Result<MemoryItem, KclError> {
 /// Computes the absolute value of a number.
 ///
 /// ```no_run
-/// const myVar = abs(-4)
+/// const myAngle = -120
+///
+/// const sketch001 = startSketchOn('-XZ')
+///   |> startProfileAt([0, 0], %)
+///   |> line([8, 0], %)
+///   |> angledLine({
+///     angle: abs(myAngle),
+///     length: 5,
+///   }, %)
+///   |> line([-5, 0], %)
+///   |> angledLine({
+///     angle: myAngle,
+///     length: 5,
+///   }, %)
+///   |> close(%)
+///
+/// const baseExtrusion = extrude(5, sketch001)
 /// ```
 #[stdlib {
     name = "abs",

src/wasm-lib/kcl/src/std/patterns.rs

@@ -90,10 +90,15 @@ pub async fn pattern_linear_2d(args: Args) -> Result<MemoryItem, KclError> {
 /// A linear pattern on a 2D sketch.
 ///
 /// ```no_run
-/// const part =  startSketchOn('XY')
-///     |> circle([0,0], 2, %)
-///     |> patternLinear2d({axis: [0,1], repetitions: 12, distance: 2}, %)
-///     |> extrude(1, %)
+/// const exampleSketch = startSketchOn('-XZ')
+///   |> circle([0, 0], 1, %)
+///   |> patternLinear2d({
+///        axis: [1, 0],
+///        repetitions: 6,
+///        distance: 4
+///      }, %)
+///
+/// const example = extrude(1, exampleSketch)
 /// ```
 #[stdlib {
     name = "patternLinear2d",
@@ -150,14 +155,19 @@ pub async fn pattern_linear_3d(args: Args) -> Result<MemoryItem, KclError> {
 /// A linear pattern on a 3D model.
 ///
 /// ```no_run
-/// const part = startSketchOn('XY')
+/// const exampleSketch = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
-///     |> line([0,1], %)
-///     |> line([1, 0], %)
-///     |> line([0, -1], %)
+///   |> line([0, 2], %)
+///   |> line([3, 1], %)
+///   |> line([0, -4], %)
 ///   |> close(%)
-///     |> extrude(1, %)
-///     |> patternLinear3d({axis: [1, 0, 1], repetitions: 3, distance: 6}, %)       
+///
+/// const example = extrude(1, exampleSketch)
+///   |> patternLinear3d({
+///        axis: [1, 0, 1],
+///        repetitions: 6,
+///       distance: 6
+///     }, %)
 /// ```
 #[stdlib {
     name = "patternLinear3d",
@@ -339,10 +349,20 @@ pub async fn pattern_circular_2d(args: Args) -> Result<MemoryItem, KclError> {
 /// A circular pattern on a 2D sketch.
 ///
 /// ```no_run
-/// const part = startSketchOn('XY')
-///     |> circle([0,0], 2, %)
-///     |> patternCircular2d({center: [20, 20], repetitions: 12, arcDegrees: 210, rotateDuplicates: true}, %)
-///     |> extrude(1, %)
+/// const exampleSketch = startSketchOn('-XZ')
+///   |> startProfileAt([.5, 25], %)
+///   |> line([0, 5], %)
+///   |> line([-1, 0], %)
+///   |> line([0, -5], %)
+///   |> close(%)
+///   |> patternCircular2d({
+///        center: [0, 0],
+///        repetitions: 12,
+///        arcDegrees: 360,
+///        rotateDuplicates: true
+///      }, %)
+///
+/// const example = extrude(1, exampleSketch)
 /// ```
 #[stdlib {
     name = "patternCircular2d",
@@ -380,14 +400,17 @@ pub async fn pattern_circular_3d(args: Args) -> Result<MemoryItem, KclError> {
 /// A circular pattern on a 3D model.
 ///
 /// ```no_run
-/// const part = startSketchOn('XY')
-///     |> startProfileAt([0, 0], %)
-///     |> line([0,1], %)
-///     |> line([1, 0], %)
-///     |> line([0, -1], %)
-///     |> close(%)
-///     |> extrude(1, %)
-///     |> patternCircular3d({axis: [1,1,0], center: [10, 0, 10], repetitions: 10, arcDegrees: 360, rotateDuplicates: true}, %)
+/// const exampleSketch = startSketchOn('-XZ')
+///   |> circle([0, 0], 1, %)
+///
+/// const example = extrude(-5, exampleSketch)
+///   |> patternCircular3d({
+///        axis: [1, -1, 0],
+///        center: [10, -20, 0],
+///        repetitions: 10,
+///        arcDegrees: 360,
+///        rotateDuplicates: true
+///      }, %)
 /// ```
 #[stdlib {
     name = "patternCircular3d",

src/wasm-lib/kcl/src/std/revolve.rs

@@ -291,21 +291,24 @@ pub async fn get_edge(args: Args) -> Result<MemoryItem, KclError> {
 /// Get an edge on a 3D solid.
 ///
 /// ```no_run
-/// const box = startSketchOn('XY')
+/// const box = startSketchOn('XZ')
 ///   |> startProfileAt([0, 0], %)
-///     |> line([0, 10], %)
+///   |> line([0, 10], %, 'revolveAxis')
 ///   |> line([10, 0], %)
-///     |> line([0, -10], %, 'revolveAxis')
+///   |> line([0, -10], %)
 ///   |> close(%)
 ///   |> extrude(10, %)
 ///
-/// const sketch001 = startSketchOn('XY')
-///     |> startProfileAt([0, -10], %)
-///     |> line([0, -10], %)
-///     |> line([2, 0], %)
+/// const revolution = startSketchOn('XZ')
+///   |> startProfileAt([-10, 0], %)
 ///   |> line([0, 10], %)
+///   |> line([2, 0], %)
+///   |> line([0, -10], %)
 ///   |> close(%)
-///     |> revolve({ axis: getEdge('revolveAxis', box), angle: 90 }, %)
+///   |> revolve({
+///        axis: getEdge('revolveAxis', box),
+///        angle: 90
+///      }, %)
 /// ```
 #[stdlib {
     name = "getEdge",

src/wasm-lib/kcl/src/std/segment.rs

@@ -22,13 +22,15 @@ pub async fn segment_end_x(args: Args) -> Result<MemoryItem, KclError> {
 /// Returns the segment end of x.
 ///
 /// ```no_run
-/// startSketchOn("YZ")
+/// const exampleSketch = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
-///     |> line([5, 0], %, "thing")
-///     |> line([5, 5], %)
-///     |> line([segEndX("thing", %), 5], %)
+///   |> line([20, 0], %, "thing")
+///   |> line([0, 5], %)
+///   |> line([segEndX("thing", %), 0], %)
+///   |> line([-20, 10], %)
 ///   |> close(%)
-///     |> extrude(5, %)
+///  
+/// const example = extrude(5, exampleSketch)
 /// ```
 #[stdlib {
     name = "segEndX",
@@ -58,13 +60,16 @@ pub async fn segment_end_y(args: Args) -> Result<MemoryItem, KclError> {
 /// Returns the segment end of y.
 ///
 /// ```no_run
-/// startSketchOn("YZ")
+/// const exampleSketch = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
-///     |> line([5, 0], %, "thing")
-///     |> line([5, 5], %)
-///     |> line([segEndY("thing", %), 5], %)
+///   |> line([20, 0], %)
+///   |> line([0, 3], %, "thing")
+///   |> line([-10, 0], %)
+///   |> line([0, segEndY("thing", %)], %)
+///   |> line([-10, 0], %)
 ///   |> close(%)
-///     |> extrude(5, %)
+///  
+/// const example = extrude(5, exampleSketch)
 /// ```
 #[stdlib {
     name = "segEndY",
@@ -94,13 +99,15 @@ pub async fn last_segment_x(args: Args) -> Result<MemoryItem, KclError> {
 /// Returns the last segment of x.
 ///
 /// ```no_run
-/// startSketchOn("YZ")
+/// const exampleSketch = startSketchOn("-XZ")
 ///   |> startProfileAt([0, 0], %)
-///     |> line([5, 0], %, "thing")
-///     |> line([5, 5], %)
+///   |> line([5, 0], %)
+///   |> line([20, 5], %)
 ///   |> line([0, lastSegX(%)], %)
+///   |> line([-15, 0], %)
 ///   |> close(%)
-///     |> extrude(5, %)
+///
+/// const example = extrude(5, exampleSketch)
 /// ```
 #[stdlib {
     name = "lastSegX",
@@ -134,13 +141,15 @@ pub async fn last_segment_y(args: Args) -> Result<MemoryItem, KclError> {
 /// Returns the last segment of y.
 ///
 /// ```no_run
-/// startSketchOn("YZ")
+/// const exampleSketch = startSketchOn("-XZ")
 ///   |> startProfileAt([0, 0], %)
-///     |> line([5, 0], %, "thing")
-///     |> line([5, 5], %)
+///   |> line([5, 0], %)
+///   |> line([20, 5], %)
 ///   |> line([0, lastSegY(%)], %)
+///   |> line([-15, 0], %)
 ///   |> close(%)
-///     |> extrude(5, %)
+///
+/// const example = extrude(5, exampleSketch)
 /// ```
 #[stdlib {
     name = "lastSegY",
@@ -173,13 +182,23 @@ pub async fn segment_length(args: Args) -> Result<MemoryItem, KclError> {
 /// Returns the length of the segment.
 ///
 /// ```no_run
-/// startSketchOn("YZ")
+/// const exampleSketch = startSketchOn("-XZ")
 ///   |> startProfileAt([0, 0], %)
-///     |> line([5, 0], %, "thing")
-///     |> line([5, 5], %)
-///     |> line([0, segLen("thing", %)], %)
+///   |> angledLine({
+///     angle: 60,
+///     length: 10,
+///   }, %, "thing")
+///   |> tangentialArc({
+///     offset: -120,
+///     radius: 5,
+///   }, %)
+///   |> angledLine({
+///     angle: -60,
+///     length: segLen("thing", %),
+///   }, %)
 ///   |> close(%)
-///     |> extrude(5, %)
+///
+/// const example = extrude(5, exampleSketch)
 /// ```
 #[stdlib {
     name = "segLen",
@@ -212,15 +231,17 @@ pub async fn segment_angle(args: Args) -> Result<MemoryItem, KclError> {
 /// Returns the angle of the segment.
 ///
 /// ```no_run
-/// const part001 = startSketchOn('XY')
-///     |> startProfileAt([4.83, 12.56], %)
-///     |> line([15.1, 2.48], %)
-///     |> line([3.15, -9.85], %, 'seg01')
-///     |> line([-15.17, -4.1], %)
-///     |> angledLine([segAng('seg01', %), 12.35], %)
-///     |> line([-13.02, 10.03], %)
+/// const exampleSketch = startSketchOn('-XZ')
+///   |> startProfileAt([0, 0], %)
+///   |> line([10, 0], %)
+///   |> line([5, 10], %, 'seg01')
+///   |> line([-10, 0], %)
+///   |> angledLine([segAng('seg01', %), 10], %)
+///   |> line([-10, 0], %)
+///   |> angledLine([segAng('seg01', %), -15], %)
 ///   |> close(%)
-///     |> extrude(4, %)
+///
+/// const example = extrude(4, exampleSketch)
 /// ```
 #[stdlib {
     name = "segAng",
@@ -252,15 +273,16 @@ pub async fn angle_to_match_length_x(args: Args) -> Result<MemoryItem, KclError>
 /// Returns the angle to match the given length for x.
 ///
 /// ```no_run
-/// const part001 = startSketchOn('XY')
+/// const sketch001 = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
-///     |> line([1, 3.82], %, 'seg01')
+///   |> line([2, 5], %, 'seg01')
 ///   |> angledLineToX([
-///         -angleToMatchLengthX('seg01', 10, %),
-///         5
+///        -angleToMatchLengthX('seg01', 7, %),
+///        10
 ///      ], %)
 ///   |> close(%)
-///     |> extrude(5, %)
+///
+/// const extrusion = extrude(5, sketch001)
 /// ```
 #[stdlib {
     name = "angleToMatchLengthX",
@@ -319,15 +341,17 @@ pub async fn angle_to_match_length_y(args: Args) -> Result<MemoryItem, KclError>
 /// Returns the angle to match the given length for y.
 ///
 /// ```no_run
-/// const part001 = startSketchOn('XY')
+/// const sketch001 = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
-///     |> line([1, 3.82], %, 'seg01')
-///     |> angledLineToX([
-///         -angleToMatchLengthY('seg01', 10, %),
-///         5
-///         ], %)
+///   |> line([1, 2], %, 'seg01')
+///   |> angledLine({
+///     angle: angleToMatchLengthY('seg01', 15, %),
+///     length: 5,
+///     }, %)
+///   |> yLineTo(0, %)
 ///   |> close(%)
-///     |> extrude(5, %)
+///  
+/// const extrusion = extrude(5, sketch001)
 /// ```
 #[stdlib {
     name = "angleToMatchLengthY",

src/wasm-lib/kcl/src/std/shapes.rs

@@ -32,17 +32,10 @@ pub async fn circle(args: Args) -> Result<MemoryItem, KclError> {
 /// Sketch a circle.
 ///
 /// ```no_run
-/// const circles = startSketchOn('XY')
-///     |> circle([5, 5], 1, %)
-///     |> patternLinear2d({axis: [1,1], repetitions: 12, distance: 3}, %)
+/// const exampleSketch = startSketchOn("-XZ")
+///   |> circle([0, 0], 10, %)
 ///
-/// const rectangle = startSketchOn('XY')
-///     |> startProfileAt([0, 0], %)
-///     |> line([0, 50], %)
-///     |> line([50, 0], %)
-///     |> line([0, -50], %)
-///     |> close(%)
-///     |> hole(circles, %)
+/// const example = extrude(5, exampleSketch)
 /// ```
 #[stdlib {
     name = "circle",

src/wasm-lib/kcl/src/std/sketch.rs

@@ -35,19 +35,14 @@ pub async fn line_to(args: Args) -> Result<MemoryItem, KclError> {
 /// Draw a line to a point.
 ///
 /// ```no_run
-/// fn rectShape = (pos, w, l) => {
-///     const rr = startSketchOn('YZ')
-///         |> startProfileAt([pos[0] - (w / 2), pos[1] - (l / 2)], %)
-///         |> lineTo([pos[0] + w / 2, pos[1] - (l / 2)], %, "edge1")
-///         |> lineTo([pos[0] + w / 2, pos[1] + l / 2], %, "edge2")
-///         |> lineTo([pos[0] - (w / 2), pos[1] + l / 2], %, "edge3")
-///         |> close(%, "edge4")
-///     return rr
-/// }
+/// const exampleSketch = startSketchOn("-XZ")
+///   |> startProfileAt([0, 0], %)
+///   |> lineTo([10, 0], %)
+///   |> lineTo([0, 10], %)
+///   |> lineTo([-10, 0], %)
+///   |> close(%)
 ///
-/// // Create the mounting plate extrusion, holes, and fillets
-/// const part = rectShape([0, 0], 20, 20)
-///  |> extrude(10, %)
+/// const example = extrude(5, exampleSketch)
 /// ```
 #[stdlib {
     name = "lineTo",
@@ -106,12 +101,23 @@ pub async fn x_line_to(args: Args) -> Result<MemoryItem, KclError> {
 /// Draw a line to a point on the x-axis.
 ///
 /// ```no_run
-/// startSketchOn('XY')
+/// const exampleSketch = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
-///    |> xLineTo(10, %, "edge1")
-///    |> line([10, 10], %)
-///    |> close(%, "edge2")
-///    |> extrude(10, %)
+///   |> xLineTo(15, %)
+///   |> angledLine({
+///     angle: 80,
+///     length: 15,
+///   }, %)
+///   |> line([8, -10], %)
+///   |> xLineTo(40, %)
+///   |> angledLine({
+///     angle: 135,
+///     length: 30,
+///   }, %)
+///   |> xLineTo(10, %)
+///   |> close(%)
+///
+/// const example = extrude(10, exampleSketch)
 /// ```
 #[stdlib {
     name = "xLineTo",
@@ -175,12 +181,14 @@ pub async fn line(args: Args) -> Result<MemoryItem, KclError> {
 /// Draw a line.
 ///
 /// ```no_run
-/// startSketchOn('-XY')
+/// const exampleSketch = startSketchOn("-XZ")
 ///   |> startProfileAt([0, 0], %)
-///  |> line([10, 10], %)
-///  |> line([20, 10], %, "edge1")
-///  |> close(%, "edge2")
-///  |> extrude(10, %)
+///   |> line([10, 0], %)
+///   |> line([0, 10], %)
+///   |> line([-10, 0], %)
+///   |> close(%)
+///
+/// const example = extrude(5, exampleSketch)
 /// ```
 #[stdlib {
     name = "line",
@@ -242,12 +250,23 @@ pub async fn x_line(args: Args) -> Result<MemoryItem, KclError> {
 /// Draw a line on the x-axis.
 ///
 /// ```no_run
-/// startSketchOn('YZ')
+/// const exampleSketch = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
+///   |> xLine(15, %)
+///   |> angledLine({
+///     angle: 80,
+///     length: 15,
+///   }, %)
+///   |> line([8, -10], %)
 ///   |> xLine(10, %)
-///  |> line([10, 10], %)
-///  |> close(%, "edge1")
-///  |> extrude(10, %)
+///   |> angledLine({
+///     angle: 120,
+///     length: 30,
+///   }, %)
+///   |> xLine(-15, %)
+///   |> close(%)
+///
+/// const example = extrude(10, exampleSketch)
 /// ```
 #[stdlib {
     name = "xLine",
@@ -273,12 +292,18 @@ pub async fn y_line(args: Args) -> Result<MemoryItem, KclError> {
 /// Draw a line on the y-axis.
 ///
 /// ```no_run
-/// startSketchOn('XY')
+/// const exampleSketch = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
-/// |> yLine(10, %)
-/// |> line([10, 10], %)
-/// |> close(%, "edge1")
-/// |> extrude(10, %)
+///   |> yLine(15, %)
+///   |> angledLine({
+///     angle: 30,
+///     length: 15,
+///   }, %)
+///   |> line([8, -10], %)
+///   |> yLine(-5, %)
+///   |> close(%)
+///
+/// const example = extrude(10, exampleSketch)
 /// ```
 #[stdlib {
     name = "yLine",
@@ -320,16 +345,18 @@ pub async fn angled_line(args: Args) -> Result<MemoryItem, KclError> {
 /// Draw an angled line.
 ///
 /// ```no_run
-/// startSketchOn('XY')
+/// const exampleSketch = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
+///   |> yLineTo(15, %)
 ///   |> angledLine({
-///     angle: 45,
-///     length: 10,
-///   }, %, "edge1")
-///   |> line([10, 10], %)
-///   |> line([0, 10], %)
-///   |> close(%, "edge2")
-///   |> extrude(10, %)
+///     angle: 30,
+///     length: 15,
+///   }, %)
+///   |> line([8, -10], %)
+///   |> yLineTo(0, %)
+///   |> close(%)
+///
+/// const example = extrude(10, exampleSketch)
 /// ```
 #[stdlib {
     name = "angledLine",
@@ -402,16 +429,14 @@ pub async fn angled_line_of_x_length(args: Args) -> Result<MemoryItem, KclError>
 /// Draw an angled line of a given x length.
 ///
 /// ```no_run
-/// startSketchOn('XZ')
+/// const sketch001 = startSketchOn('XZ')
 ///   |> startProfileAt([0, 0], %)
-///   |> angledLineOfXLength({
-///       angle: 45,
-///       length: 10,
-///     }, %, "edge1")
-///   |> line([10, 10], %)
-///   |> line([0, 10], %)
-///   |> close(%, "edge2")
-///   |> extrude(10, %)
+///   |> angledLineOfXLength({ angle: 45, length: 10 }, %, "edge1")
+///   |> angledLineOfXLength({ angle: -15, length: 20 }, %, "edge2")
+///   |> line([0, -5], %)
+///   |> close(%, "edge3")
+///
+/// const extrusion = extrude(10, sketch001)
 /// ```
 #[stdlib {
     name = "angledLineOfXLength",
@@ -457,17 +482,14 @@ pub async fn angled_line_to_x(args: Args) -> Result<MemoryItem, KclError> {
 /// Draw an angled line to a given x coordinate.
 ///
 /// ```no_run
-/// startSketchOn('XY')
+/// const exampleSketch = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
-///   |> angledLineToX({
-///     angle: 45,
-///     to: 10,
-///     }, %, "edge1")
-///   |> line([10, 10], %)
+///   |> angledLineToX({ angle: 30, to: 10 }, %)
 ///   |> line([0, 10], %)
-///   |> close(%, "edge2")
-///   |> extrude(10, %)
-///   |> fillet({radius: 2, tags: ["edge1"]}, %)
+///   |> line([-10, 0], %)
+///   |> close(%)
+///  
+/// const example = extrude(10, exampleSketch)
 /// ```
 #[stdlib {
     name = "angledLineToX",
@@ -502,17 +524,16 @@ pub async fn angled_line_of_y_length(args: Args) -> Result<MemoryItem, KclError>
 /// Draw an angled line of a given y length.
 ///
 /// ```no_run
-/// startSketchOn('YZ')
+/// const exampleSketch = startSketchOn('XZ')
 ///   |> startProfileAt([0, 0], %)
-///   |> angledLineOfYLength({
-///       angle: 45,
-///       length: 10,
-///     }, %, "edge1")
-///   |> line([10, 10], %)
+///   |> line([10, 0], %)
+///   |> angledLineOfYLength({ angle: 45, length: 10 }, %)
 ///   |> line([0, 10], %)
-///   |> close(%, "edge2")
-///   |> extrude(10, %)
-///   |> fillet({radius: 2, tags: ["edge1"]}, %)
+///   |> angledLineOfYLength({ angle: 135, length: 10 }, %)
+///   |> line([-10, 0], %)
+///   |> line([0, -30], %)
+///
+/// const example = extrude(10, exampleSketch)
 /// ```
 #[stdlib {
     name = "angledLineOfYLength",
@@ -547,16 +568,14 @@ pub async fn angled_line_to_y(args: Args) -> Result<MemoryItem, KclError> {
 /// Draw an angled line to a given y coordinate.
 ///
 /// ```no_run
-/// startSketchOn('XY')
+/// const exampleSketch = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
-///   |> angledLineToY({
-///       angle: 45,
-///       to: 10,
-///     }, %, "edge1")
-///   |> line([10, 10], %)
-///   |> line([0, 10], %)
-///   |> close(%, "edge2")
-///   |> extrude(10, %)
+///   |> angledLineToY({ angle: 60, to: 20 }, %)
+///   |> line([-20, 0], %)
+///   |> angledLineToY({ angle: 70, to: 10 }, %)
+///   |> close(%)
+///
+/// const example = extrude(10, exampleSketch)
 /// ```
 #[stdlib {
     name = "angledLineToY",
@@ -603,18 +622,19 @@ pub async fn angled_line_that_intersects(args: Args) -> Result<MemoryItem, KclEr
 /// Draw an angled line that intersects with a given line.
 ///
 /// ```no_run
-/// const part001 = startSketchOn('XY')
+/// const exampleSketch = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
-///   |> lineTo([2, 2], %, "yo")
-///   |> lineTo([3, 1], %)
+///   |> lineTo([5, 10], %)
+///   |> lineTo([-10, 10], %, "lineToIntersect")
+///   |> lineTo([0, 20], %)
 ///   |> angledLineThatIntersects({
-///       angle: 180,
-///       intersectTag: 'yo',
-///       offset: 12,
-///     }, %, "yo2")
-///   |> line([4, 0], %)
-///   |> close(%, "yo3")
-///   |> extrude(10, %)
+///        angle: 80,
+///        intersectTag: 'lineToIntersect',
+///        offset: 10
+///      }, %)
+///   |> close(%)
+///
+/// const example = extrude(10, exampleSketch)
 /// ```
 #[stdlib {
     name = "angledLineThatIntersects",
@@ -661,11 +681,33 @@ pub async fn start_sketch_at(args: Args) -> Result<MemoryItem, KclError> {
 /// Start a sketch at a given point on the 'XY' plane.
 ///
 /// ```no_run
-/// startSketchAt([0, 0])
-///    |> line([10, 10], %)
-///    |> line([20, 10], %, "edge1")
-///    |> close(%, "edge2")
-///    |> extrude(10, %)
+/// const exampleSketch = startSketchAt([0, 0])
+///   |> line([10, 0], %)
+///   |> line([0, 10], %)
+///   |> line([-10, 0], %)
+///   |> close(%)
+///
+/// const example = extrude(5, exampleSketch)
+/// ```
+///
+/// ```no_run
+/// const exampleSketch = startSketchAt([10, 10])
+///   |> line([10, 0], %)
+///   |> line([0, 10], %)
+///   |> line([-10, 0], %)
+///   |> close(%)
+///
+/// const example = extrude(5, exampleSketch)
+/// ```
+///
+/// ```no_run
+/// const exampleSketch = startSketchAt([-10, 23])
+///   |> line([10, 0], %)
+///   |> line([0, 10], %)
+///   |> line([-10, 0], %)
+///   |> close(%)
+///
+/// const example = extrude(5, exampleSketch)
 /// ```
 #[stdlib {
     name = "startSketchAt",
@@ -813,35 +855,85 @@ pub async fn start_sketch_on(args: Args) -> Result<MemoryItem, KclError> {
 /// Start a sketch on a specific plane or face.
 ///
 /// ```no_run
-/// startSketchOn('XY')
+/// const exampleSketch = startSketchOn("XY")
 ///   |> startProfileAt([0, 0], %)
-///  |> line([10, 10], %)
-///  |> line([20, 10], %, "edge1")
-///  |> close(%, "edge2")
-///  |> extrude(10, %)
+///   |> line([10, 0], %)
+///   |> line([0, 10], %)
+///   |> line([-10, 0], %)
+///   |> close(%)
+///
+/// const example = extrude(5, exampleSketch)
+///
+/// const exampleSketch002 = startSketchOn(example, 'end')
+///   |> startProfileAt([1, 1], %)
+///   |> line([8, 0], %)
+///   |> line([0, 8], %)
+///   |> line([-8, 0], %)
+///   |> close(%)
+///
+/// const example002 = extrude(5, exampleSketch002)
+///
+/// const exampleSketch003 = startSketchOn(example002, 'end')
+///   |> startProfileAt([2, 2], %)
+///   |> line([6, 0], %)
+///   |> line([0, 6], %)
+///   |> line([-6, 0], %)
+///   |> close(%)
+///
+/// const example003 = extrude(5, exampleSketch003)
 /// ```
 ///
 /// ```no_run
-/// fn cube = (pos, scale) => {
-///     const sg = startSketchOn('XY')
-///         |> startProfileAt(pos, %)
-///         |> line([0, scale], %)
-///         |> line([scale, 0], %)
-///         |> line([0, -scale], %)
-///         |> close(%)
-///         |> extrude(scale, %)
-///
-///     return sg
-/// }
-///
-/// const box = cube([0,0], 20)
-///
-/// const part001 = startSketchOn(box, "start")
+/// const exampleSketch = startSketchOn("XY")
 ///   |> startProfileAt([0, 0], %)
-/// |> line([10, 10], %)
-/// |> line([20, 10], %, "edge1")
+///   |> line([10, 0], %)
+///   |> line([0, 10], %, 'sketchingFace')
+///   |> line([-10, 0], %)
 ///   |> close(%)
-/// |> extrude(20, %)
+///
+/// const example = extrude(10, exampleSketch)
+///
+/// const exampleSketch002 = startSketchOn(example, 'sketchingFace')
+///   |> startProfileAt([1, 1], %)
+///   |> line([8, 0], %)
+///   |> line([0, 8], %)
+///   |> line([-8, 0], %)
+///   |> close(%, 'sketchingFace002')
+///
+/// const example002 = extrude(10, exampleSketch002)
+///
+/// const exampleSketch003 = startSketchOn(example002, 'sketchingFace002')
+///   |> startProfileAt([-8, 12], %)
+///   |> line([0, 6], %)
+///   |> line([6, 0], %)
+///   |> line([0, -6], %)
+///   |> close(%)
+///
+/// const example003 = extrude(5, exampleSketch003)
+/// ```
+///
+/// ```no_run
+/// const exampleSketch = startSketchOn('XY')
+///   |> startProfileAt([4, 12], %)
+///   |> line([2, 0], %)
+///   |> line([0, -6], %)
+///   |> line([4, -6], %)
+///   |> line([0, -6], %)
+///   |> line([-3.75, -4.5], %)
+///   |> line([0, -5.5], %)
+///   |> line([-2, 0], %)
+///   |> close(%)
+///
+/// const example = revolve({ axis: 'y', angle: 180 }, exampleSketch)
+///  
+/// const exampleSketch002 = startSketchOn(example, 'end')
+///   |> startProfileAt([4.5, -5], %)
+///   |> line([0, 5], %)
+///   |> line([5, 0], %)
+///   |> line([0, -5], %)
+///   |> close(%)
+///
+/// const example002 = extrude(5, exampleSketch002)
 /// ```
 #[stdlib {
     name = "startSketchOn",
@@ -1031,12 +1123,36 @@ pub async fn start_profile_at(args: Args) -> Result<MemoryItem, KclError> {
 /// Start a profile at a given point.
 ///
 /// ```no_run
-/// startSketchOn('XY')
+/// const exampleSketch = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
-///     |> line([10, 10], %)
 ///   |> line([10, 0], %)
+///   |> line([0, 10], %)
+///   |> line([-10, 0], %)
 ///   |> close(%)
-///     |> extrude(10, %)
+///
+/// const example = extrude(5, exampleSketch)
+/// ```
+///
+/// ```no_run
+/// const exampleSketch = startSketchOn('-XZ')
+///   |> startProfileAt([10, 10], %)
+///   |> line([10, 0], %)
+///   |> line([0, 10], %)
+///   |> line([-10, 0], %)
+///   |> close(%)
+///
+/// const example = extrude(5, exampleSketch)
+/// ```
+///
+/// ```no_run
+/// const exampleSketch = startSketchOn('-XZ')
+///   |> startProfileAt([-10, 23], %)
+///   |> line([10, 0], %)
+///   |> line([0, 10], %)
+///   |> line([-10, 0], %)
+///   |> close(%)
+///
+/// const example = extrude(5, exampleSketch)
 /// ```
 #[stdlib {
     name = "startProfileAt",
@@ -1111,12 +1227,13 @@ pub async fn close(args: Args) -> Result<MemoryItem, KclError> {
 /// ```
 ///
 /// ```no_run
-/// startSketchOn('YZ')
+/// const exampleSketch = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
-///    |> line([10, 10], %)
 ///   |> line([10, 0], %)
-///    |> close(%, "edge1")
-///    |> extrude(10, %)
+///   |> line([0, 10], %)
+///   |> close(%)
+///
+/// const example = extrude(10, exampleSketch)
 /// ```
 #[stdlib {
     name = "close",
@@ -1199,14 +1316,17 @@ pub async fn arc(args: Args) -> Result<MemoryItem, KclError> {
 /// Draw an arc.
 ///
 /// ```no_run
-/// startSketchOn('-YZ')
+/// const exampleSketch = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
+///   |> line([10, 0], %)
 ///   |> arc({
 ///        angle_start: 0,
-///     angle_end: 360,
-///     radius: 10,
-///   }, %, "edge1")
-///   |> extrude(10, %)
+///        angle_end: 280,
+///        radius: 16
+///      }, %)
+///   |> close(%)
+///     
+// const example = extrude(10, exampleSketch)
 /// ```
 #[stdlib {
     name = "arc",
@@ -1299,15 +1419,20 @@ pub async fn tangential_arc(args: Args) -> Result<MemoryItem, KclError> {
 /// Draw an arc.
 ///
 /// ```no_run
-/// startSketchOn('-YZ')
+/// const exampleSketch = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
-///   |> line([10, 10], %, "edge1")
-///   |> tangentialArc({
-///     radius: 10,
-///     offset: 90,
-///   }, %, "edge1")
+///   |> angledLine({
+///     angle: 60,
+///     length: 10,
+///   }, %)
+///   |> tangentialArc({ radius: 10, offset: -120 }, %)
+///   |> angledLine({
+///     angle: -60,
+///     length: 10,
+///   }, %)
 ///   |> close(%)
-///   |> extrude(10, %)
+///
+/// const example = extrude(10, exampleSketch)
 /// ```
 #[stdlib {
     name = "tangentialArc",
@@ -1418,12 +1543,17 @@ pub async fn tangential_arc_to(args: Args) -> Result<MemoryItem, KclError> {
 /// Draw an arc.
 ///
 /// ```no_run
-/// startSketchOn('-YZ')
+/// const exampleSketch = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
-/// |> line([10, 10], %, "edge0")
-/// |> tangentialArcTo([10, 0], %)
+///   |> angledLine({
+///     angle: 60,
+///     length: 10,
+///   }, %)
+///   |> tangentialArcTo([15, 15], %)
+///   |> line([10, -15], %)
 ///   |> close(%)
-/// |> extrude(10, %)
+///
+/// const example = extrude(10, exampleSketch)
 /// ```
 #[stdlib {
     name = "tangentialArcTo",
@@ -1498,15 +1628,18 @@ pub async fn bezier_curve(args: Args) -> Result<MemoryItem, KclError> {
 /// Draw a bezier curve.
 ///
 /// ```no_run
-/// startSketchOn('XY')
+/// const exampleSketch = startSketchOn('-XZ')
 ///   |> startProfileAt([0, 0], %)
+///   |> line([0, 10], %)
 ///   |> bezierCurve({
 ///        to: [10, 10],
 ///        control1: [5, 0],
-///      control2: [5, 10],
-///    }, %, "edge1")
+///        control2: [5, 10]
+///      }, %)
+///   |> lineTo([10, 0], %)
 ///   |> close(%)
-///  |> extrude(10, %)
+///
+/// const example = extrude(10, exampleSketch)
 /// ```
 #[stdlib {
     name = "bezierCurve",
@@ -1580,15 +1713,33 @@ pub async fn hole(args: Args) -> Result<MemoryItem, KclError> {
 /// Use a sketch to cut a hole in another sketch.
 ///
 /// ```no_run
-/// const square = startSketchOn('XY')
+/// const exampleSketch = startSketchOn('XY')
 ///   |> startProfileAt([0, 0], %)
-///     |> line([0, 10], %)
-///     |> line([10, 0], %)
-///     |> line([0, -10], %)
+///   |> line([0, 5], %)
+///   |> line([5, 0], %)
+///   |> line([0, -5], %)
 ///   |> close(%)
-///     |> hole(circle([2, 2], .5, %), %)
-///     |> hole(circle([2, 8], .5, %), %)
-///     |> extrude(2, %)
+///   |> hole(circle([1, 1], .25, %), %)
+///   |> hole(circle([1, 4], .25, %), %)
+///
+/// const example = extrude(1, exampleSketch)
+/// ```
+///
+/// ```no_run
+/// fn squareHoleSketch = () => {
+///     const squareSketch = startSketchOn('-XZ')
+///       |> startProfileAt([-1, -1], %)
+///       |> line([2, 0], %)
+///       |> line([0, 2], %)
+///       |> line([-2, 0], %)
+///       |> close(%)
+///     return squareSketch
+///   }
+///  
+///   const exampleSketch = startSketchOn('-XZ')
+///     |> circle([0, 0], 3, %)
+///     |> hole(squareHoleSketch(), %)
+//   const example = extrude(1, exampleSketch)
 /// ```
 #[stdlib {
     name = "hole",