diff --git a/src/wasm-lib/tests/executor/inputs/angled_line.kcl b/src/wasm-lib/tests/executor/inputs/angled_line.kcl
new file mode 100644
index 000000000..94fb2b859
--- /dev/null
+++ b/src/wasm-lib/tests/executor/inputs/angled_line.kcl
@@ -0,0 +1,9 @@
+const part001 = startSketchOn('XY')
+  |> startProfileAt([4.83, 12.56], %)
+  |> line([15.1, 2.48], %)
+  |> line([3.15, -9.85], %, $seg01)
+  |> line([-15.17, -4.1], %)
+  |> angledLine([segAng(seg01), 12.35], %)
+  |> line([-13.02, 10.03], %)
+  |> close(%)
+  |> extrude(4, %)
diff --git a/src/wasm-lib/tests/executor/inputs/close_arc.kcl b/src/wasm-lib/tests/executor/inputs/close_arc.kcl
new file mode 100644
index 000000000..ecd867c07
--- /dev/null
+++ b/src/wasm-lib/tests/executor/inputs/close_arc.kcl
@@ -0,0 +1,9 @@
+const center = [0,0]
+const radius = 40
+const height = 3
+
+const body = startSketchOn('XY')
+      |> startProfileAt([center[0]+radius, center[1]], %)
+      |> arc({angle_end: 360, angle_start: 0, radius: radius}, %)
+      |> close(%)
+      |> extrude(height, %)
diff --git a/src/wasm-lib/tests/executor/inputs/dimensions_match.kcl b/src/wasm-lib/tests/executor/inputs/dimensions_match.kcl
new file mode 100644
index 000000000..4c1f3a9a6
--- /dev/null
+++ b/src/wasm-lib/tests/executor/inputs/dimensions_match.kcl
@@ -0,0 +1,7 @@
+const part001 = startSketchOn('XY')
+  |> startProfileAt([-10, -10], %)
+  |> line([20, 0], %)
+  |> line([0, 20], %)
+  |> line([-20, 0], %)
+  |> close(%)
+  |> extrude(10, %)
diff --git a/src/wasm-lib/tests/executor/inputs/helix_ccw.kcl b/src/wasm-lib/tests/executor/inputs/helix_ccw.kcl
new file mode 100644
index 000000000..6975ab7b9
--- /dev/null
+++ b/src/wasm-lib/tests/executor/inputs/helix_ccw.kcl
@@ -0,0 +1,4 @@
+const part001 = startSketchOn('XY')
+     |> circle([5, 5], 10, %)
+     |> extrude(10, %)
+     |> helix({revolutions: 16, angle_start: 0, ccw: true}, %)
diff --git a/src/wasm-lib/tests/executor/inputs/helix_defaults.kcl b/src/wasm-lib/tests/executor/inputs/helix_defaults.kcl
new file mode 100644
index 000000000..e85eab8de
--- /dev/null
+++ b/src/wasm-lib/tests/executor/inputs/helix_defaults.kcl
@@ -0,0 +1,4 @@
+const part001 = startSketchOn('XY')
+     |> circle([5, 5], 10, %)
+     |> extrude(10, %)
+     |> helix({revolutions: 16, angle_start: 0}, %)
diff --git a/src/wasm-lib/tests/executor/inputs/helix_defaults_negative_extrude.kcl b/src/wasm-lib/tests/executor/inputs/helix_defaults_negative_extrude.kcl
new file mode 100644
index 000000000..9a2f3efc1
--- /dev/null
+++ b/src/wasm-lib/tests/executor/inputs/helix_defaults_negative_extrude.kcl
@@ -0,0 +1,4 @@
+const part001 = startSketchOn('XY')
+     |> circle([5, 5], 10, %)
+     |> extrude(-10, %)
+     |> helix({revolutions: 16, angle_start: 0}, %)
diff --git a/src/wasm-lib/tests/executor/inputs/helix_with_length.kcl b/src/wasm-lib/tests/executor/inputs/helix_with_length.kcl
new file mode 100644
index 000000000..1847d4ad0
--- /dev/null
+++ b/src/wasm-lib/tests/executor/inputs/helix_with_length.kcl
@@ -0,0 +1,4 @@
+const part001 = startSketchOn('XY')
+     |> circle([5, 5], 10, %)
+     |> extrude(10, %)
+     |> helix({revolutions: 16, angle_start: 0, length: 3}, %)
diff --git a/src/wasm-lib/tests/executor/inputs/member_expression_sketch_group.kcl b/src/wasm-lib/tests/executor/inputs/member_expression_sketch_group.kcl
new file mode 100644
index 000000000..f02e76a00
--- /dev/null
+++ b/src/wasm-lib/tests/executor/inputs/member_expression_sketch_group.kcl
@@ -0,0 +1,17 @@
+fn cube = (pos, scale) => {
+  const sg = startSketchOn('XY')
+    |> startProfileAt(pos, %)
+    |> line([0, scale], %)
+    |> line([scale, 0], %)
+    |> line([0, -scale], %)
+    |> close(%)
+
+  return sg
+}
+
+const b1 = cube([0,0], 10)
+const b2 = cube([3,3], 4)
+    |> extrude(10, %)
+
+const pt1 = b1.value[0]
+const pt2 = b2.value[0]
diff --git a/src/wasm-lib/tests/executor/inputs/negative_args.kcl b/src/wasm-lib/tests/executor/inputs/negative_args.kcl
new file mode 100644
index 000000000..1983ef07e
--- /dev/null
+++ b/src/wasm-lib/tests/executor/inputs/negative_args.kcl
@@ -0,0 +1,19 @@
+const width = 5
+const height = 10
+const length = 12
+
+fn box = (sk1, sk2, scale) => {
+  const boxSketch = startSketchOn('XY')
+    |> startProfileAt([sk1, sk2], %)
+    |> line([0, scale], %)
+    |> line([scale, 0], %)
+    |> line([0, -scale], %)
+    |> close(%)
+    |> extrude(scale, %)
+  return boxSketch
+}
+
+box(0, 0, 5)
+box(10, 23, 8)
+let thing = box(-12, -15, 10)
+box(-20, -5, 10)
diff --git a/src/wasm-lib/tests/executor/inputs/parametric.kcl b/src/wasm-lib/tests/executor/inputs/parametric.kcl
new file mode 100644
index 000000000..688095315
--- /dev/null
+++ b/src/wasm-lib/tests/executor/inputs/parametric.kcl
@@ -0,0 +1,18 @@
+const sigmaAllow = 35000 // psi
+const width = 9 // inch
+const p = 150 // Force on shelf - lbs
+const distance = 6 // inches
+const FOS = 2
+
+const leg1 = 5 // inches
+const leg2 = 8 // inches
+const thickness = sqrt(distance * p * FOS * 6 / sigmaAllow / width) // inches
+const bracket = startSketchOn('XY')
+  |> startProfileAt([0, 0], %)
+  |> line([0, leg1], %)
+  |> line([leg2, 0], %)
+  |> line([0, -thickness], %)
+  |> line([-leg2 + thickness, 0], %)
+  |> line([0, -leg1 + thickness], %)
+  |> close(%)
+  |> extrude(width, %)
diff --git a/src/wasm-lib/tests/executor/inputs/parametric_with_tan_arc.kcl b/src/wasm-lib/tests/executor/inputs/parametric_with_tan_arc.kcl
new file mode 100644
index 000000000..f6c085837
--- /dev/null
+++ b/src/wasm-lib/tests/executor/inputs/parametric_with_tan_arc.kcl
@@ -0,0 +1,26 @@
+const sigmaAllow = 15000 // psi
+const width = 11 // inch
+const p = 150 // Force on shelf - lbs
+const distance = 12 // inches
+const FOS = 2
+const thickness = sqrt(distance * p * FOS * 6 / ( sigmaAllow * width ))
+const filletR = thickness * 2
+const shelfMountL = 9
+const wallMountL = 8
+
+const bracket = startSketchAt([0, 0])
+  |> line([0, wallMountL], %)
+  |> tangentialArc({
+    radius: filletR,
+    offset: 90
+  }, %)
+  |> line([-shelfMountL, 0], %)
+  |> line([0, -thickness], %)
+  |> line([shelfMountL, 0], %)
+  |> tangentialArc({
+    radius: filletR - thickness,
+    offset: -90
+  }, %)
+  |> line([0, -wallMountL], %)
+  |> close(%)
+  |> extrude(width, %)
diff --git a/src/wasm-lib/tests/executor/main.rs b/src/wasm-lib/tests/executor/main.rs
index 7d2abfc82..7eb27622b 100644
--- a/src/wasm-lib/tests/executor/main.rs
+++ b/src/wasm-lib/tests/executor/main.rs
@@ -150,77 +150,21 @@ async fn kcl_test_execute_with_function_sketch_with_position() {
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_execute_with_angled_line() {
-    let code = r#"const part001 = startSketchOn('XY')
-  |> startProfileAt([4.83, 12.56], %)
-  |> line([15.1, 2.48], %)
-  |> line([3.15, -9.85], %, $seg01)
-  |> line([-15.17, -4.1], %)
-  |> angledLine([segAng(seg01), 12.35], %)
-  |> line([-13.02, 10.03], %)
-  |> close(%)
-  |> extrude(4, %)
-"#;
-
+    let code = kcl_input!("angled_line");
     let result = execute_and_snapshot(code, UnitLength::Mm).await.unwrap();
     assert_out("angled_line", &result);
 }
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_execute_parametric_example() {
-    let code = r#"const sigmaAllow = 35000 // psi
-const width = 9 // inch
-const p = 150 // Force on shelf - lbs
-const distance = 6 // inches
-const FOS = 2
-
-const leg1 = 5 // inches
-const leg2 = 8 // inches
-const thickness = sqrt(distance * p * FOS * 6 / sigmaAllow / width) // inches
-const bracket = startSketchOn('XY')
-  |> startProfileAt([0, 0], %)
-  |> line([0, leg1], %)
-  |> line([leg2, 0], %)
-  |> line([0, -thickness], %)
-  |> line([-leg2 + thickness, 0], %)
-  |> line([0, -leg1 + thickness], %)
-  |> close(%)
-  |> extrude(width, %)
-"#;
-
+    let code = kcl_input!("parametric");
     let result = execute_and_snapshot(code, UnitLength::Mm).await.unwrap();
     assert_out("parametric", &result);
 }
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_execute_parametric_with_tan_arc_example() {
-    let code = r#"const sigmaAllow = 15000 // psi
-const width = 11 // inch
-const p = 150 // Force on shelf - lbs
-const distance = 12 // inches
-const FOS = 2
-const thickness = sqrt(distance * p * FOS * 6 / ( sigmaAllow * width ))
-const filletR = thickness * 2
-const shelfMountL = 9
-const wallMountL = 8
-
-const bracket = startSketchAt([0, 0])
-  |> line([0, wallMountL], %)
-  |> tangentialArc({
-    radius: filletR,
-    offset: 90
-  }, %)
-  |> line([-shelfMountL, 0], %)
-  |> line([0, -thickness], %)
-  |> line([shelfMountL, 0], %)
-  |> tangentialArc({
-    radius: filletR - thickness,
-    offset: -90
-  }, %)
-  |> line([0, -wallMountL], %)
-  |> close(%)
-  |> extrude(width, %)
-"#;
-
+    let code = kcl_input!("parametric_with_tan_arc");
     let result = execute_and_snapshot(code, UnitLength::Mm).await.unwrap();
     assert_out("parametric_with_tan_arc", &result);
 }
@@ -280,24 +224,7 @@ async fn kcl_test_execute_kittycad_svg() {
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_member_expression_sketch_group() {
-    let code = r#"fn cube = (pos, scale) => {
-  const sg = startSketchOn('XY')
-    |> startProfileAt(pos, %)
-    |> line([0, scale], %)
-    |> line([scale, 0], %)
-    |> line([0, -scale], %)
-    |> close(%)
-
-  return sg
-}
-
-const b1 = cube([0,0], 10)
-const b2 = cube([3,3], 4)
-    |> extrude(10, %)
-
-const pt1 = b1.value[0]
-const pt2 = b2.value[0]
-"#;
+    let code = kcl_input!("member_expression_sketch_group");
 
     let result = execute_and_snapshot(code, UnitLength::Mm).await.unwrap();
     assert_out("member_expression_sketch_group", &result);
@@ -305,11 +232,7 @@ const pt2 = b2.value[0]
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_helix_defaults() {
-    let code = r#"const part001 = startSketchOn('XY')
-     |> circle([5, 5], 10, %)
-     |> extrude(10, %)
-     |> helix({revolutions: 16, angle_start: 0}, %)
-"#;
+    let code = kcl_input!("helix_defaults");
 
     let result = execute_and_snapshot(code, UnitLength::Mm).await.unwrap();
     assert_out("helix_defaults", &result);
@@ -317,11 +240,7 @@ async fn kcl_test_helix_defaults() {
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_helix_defaults_negative_extrude() {
-    let code = r#"const part001 = startSketchOn('XY')
-     |> circle([5, 5], 10, %)
-     |> extrude(-10, %)
-     |> helix({revolutions: 16, angle_start: 0}, %)
-"#;
+    let code = kcl_input!("helix_defaults_negative_extrude");
 
     let result = execute_and_snapshot(code, UnitLength::Mm).await.unwrap();
     assert_out("helix_defaults_negative_extrude", &result);
@@ -329,11 +248,7 @@ async fn kcl_test_helix_defaults_negative_extrude() {
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_helix_ccw() {
-    let code = r#"const part001 = startSketchOn('XY')
-     |> circle([5, 5], 10, %)
-     |> extrude(10, %)
-     |> helix({revolutions: 16, angle_start: 0, ccw: true}, %)
-"#;
+    let code = kcl_input!("helix_ccw");
 
     let result = execute_and_snapshot(code, UnitLength::Mm).await.unwrap();
     assert_out("helix_ccw", &result);
@@ -341,11 +256,7 @@ async fn kcl_test_helix_ccw() {
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_helix_with_length() {
-    let code = r#"const part001 = startSketchOn('XY')
-     |> circle([5, 5], 10, %)
-     |> extrude(10, %)
-     |> helix({revolutions: 16, angle_start: 0, length: 3}, %)
-"#;
+    let code = kcl_input!("helix_with_length");
 
     let result = execute_and_snapshot(code, UnitLength::Mm).await.unwrap();
     assert_out("helix_with_length", &result);
@@ -353,14 +264,7 @@ async fn kcl_test_helix_with_length() {
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_dimensions_match() {
-    let code = r#"const part001 = startSketchOn('XY')
-  |> startProfileAt([-10, -10], %)
-  |> line([20, 0], %)
-  |> line([0, 20], %)
-  |> line([-20, 0], %)
-  |> close(%)
-  |> extrude(10, %)
-"#;
+    let code = kcl_input!("dimensions_match");
 
     let result = execute_and_snapshot(code, UnitLength::Mm).await.unwrap();
     assert_out("dimensions_match", &result);
@@ -368,16 +272,7 @@ async fn kcl_test_dimensions_match() {
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_close_arc() {
-    let code = r#"const center = [0,0]
-const radius = 40
-const height = 3
-
-const body = startSketchOn('XY')
-      |> startProfileAt([center[0]+radius, center[1]], %)
-      |> arc({angle_end: 360, angle_start: 0, radius: radius}, %)
-      |> close(%)
-      |> extrude(height, %)
-"#;
+    let code = kcl_input!("close_arc");
 
     let result = execute_and_snapshot(code, UnitLength::Mm).await.unwrap();
     assert_out("close_arc", &result);
@@ -385,25 +280,7 @@ const body = startSketchOn('XY')
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_negative_args() {
-    let code = r#"const width = 5
-const height = 10
-const length = 12
-
-fn box = (sk1, sk2, scale) => {
-  const boxSketch = startSketchOn('XY')
-    |> startProfileAt([sk1, sk2], %)
-    |> line([0, scale], %)
-    |> line([scale, 0], %)
-    |> line([0, -scale], %)
-    |> close(%)
-    |> extrude(scale, %)
-  return boxSketch
-}
-
-box(0, 0, 5)
-box(10, 23, 8)
-let thing = box(-12, -15, 10)
-box(-20, -5, 10)"#;
+    let code = kcl_input!("negative_args");
 
     let result = execute_and_snapshot(code, UnitLength::Mm).await.unwrap();
     assert_out("negative_args", &result);