ByoungSooPark/modeling-app
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

BREAKING: KCL @settings are the source of truth for units (#5808)

Browse Source
This commit is contained in:
Jonathan Tran
2025-03-31 10:56:03 -04:00
committed by GitHub
parent eac5abba79
commit efc8c82d8b
237 changed files with 820 additions and 2146 deletions
Download Patch File Download Diff File Expand all files Collapse all files

46
e2e/playwright/point-click.spec.ts
View File

@ -137,7 +137,7 @@ test.describe('Point-and-click tests', () => {
await scene.moveCameraTo(cameraPos, cameraTarget)
await test.step('check chamfer selection changes cursor positon', async () => {
await test.step('check chamfer selection changes cursor position', async () => {
await expect(async () => {
// sometimes initial click doesn't register
await clickChamfer()
@ -173,7 +173,7 @@ test.describe('Point-and-click tests', () => {
})
await test.step('Check there is no errors after code created in previous steps executes', async () => {
await editor.expectState({
activeLines: ['sketch001 = startSketchOn(XZ)'],
activeLines: ['@settings(defaultLengthUnit = in)'],
highlightedCode: '',
diagnostics: [],
})
@ -299,7 +299,8 @@ test.describe('Point-and-click tests', () => {
await test.step('verify at the end of the test that final code is what is expected', async () => {
await editor.expectEditor.toContain(
`sketch001 = startSketchOn(XZ)
`@settings(defaultLengthUnit = in)
sketch001 = startSketchOn(XZ)
|> startProfileAt([75.8, 317.2], %) // [$startCapTag, $EndCapTag]
|> angledLine([0, 268.43], %, $rectangleSegmentA001)
|> angledLine([
@ -369,7 +370,7 @@ profile001 = startProfileAt([205.96, 254.59], sketch002)
})
})
test('Works on chamfers that are non in a pipeExpression can break up multi edges in a chamfer array', async ({
test('Works on chamfers that are not in a pipeExpression can break up multi edges in a chamfer array', async ({
context,
page,
homePage,
@ -418,7 +419,8 @@ profile001 = startProfileAt([205.96, 254.59], sketch002)
|>close()`,
})
await editor.expectEditor.toContain(
`sketch001 = startSketchOn(XZ)
`@settings(defaultLengthUnit = in)
sketch001 = startSketchOn(XZ)
|> startProfileAt([75.8, 317.2], %)
|> angledLine([0, 268.43], %, $rectangleSegmentA001)
|> angledLine([
@ -1639,9 +1641,10 @@ loft001 = loft([sketch001, sketch002])
{
targetType: 'circle',
testPoint: { x: 700, y: 250 },
initialCode: `sketch001 = startSketchOn('YZ')
initialCode: `@settings(defaultLengthUnit = in)
sketch001 = startSketchOn(YZ)
profile001 = circle(sketch001, center = [0, 0], radius = 500)
sketch002 = startSketchOn('XZ')
sketch002 = startSketchOn(XZ)
|> startProfileAt([0, 0], %)
|> xLine(length = -500)
|> tangentialArcTo([-2000, 500], %)`,
@ -1649,7 +1652,8 @@ sketch002 = startSketchOn('XZ')
{
targetType: 'rectangle',
testPoint: { x: 710, y: 255 },
initialCode: `sketch001 = startSketchOn('YZ')
initialCode: `@settings(defaultLengthUnit = in)
sketch001 = startSketchOn(YZ)
profile001 = startProfileAt([-400, -400], sketch001)
|> angledLine([0, 800], %, $rectangleSegmentA001)
|> angledLine([
@ -1662,7 +1666,7 @@ profile001 = startProfileAt([-400, -400], sketch001)
], %)
|> line(endAbsolute = [profileStartX(%), profileStartY(%)])
|> close()
sketch002 = startSketchOn('XZ')
sketch002 = startSketchOn(XZ)
|> startProfileAt([0, 0], %)
|> xLine(length = -500)
|> tangentialArcTo([-2000, 500], %)`,
@ -1806,7 +1810,8 @@ sketch002 = startSketchOn('XZ')
toolbar,
cmdBar,
}) => {
const initialCode = `sketch001 = startSketchOn(YZ)
const initialCode = `@settings(defaultLengthUnit = in)
sketch001 = startSketchOn(YZ)
|> circle(
center = [0, 0],
radius = 500
@ -2475,7 +2480,8 @@ extrude001 = extrude(profile001, length = 5)
cmdBar,
}) => {
// Code samples
const initialCode = `sketch001 = startSketchOn(XY)
const initialCode = `@settings(defaultLengthUnit = in)
sketch001 = startSketchOn(XY)
|> startProfileAt([-12, -6], %)
|> line(end = [0, 12])
|> line(end = [24, 0])
@ -2767,7 +2773,8 @@ extrude001 = extrude(sketch001, length = -12)
toolbar,
}) => {
// Code samples
const initialCode = `sketch001 = startSketchOn(XY)
const initialCode = `@settings(defaultLengthUnit = in)
sketch001 = startSketchOn(XY)
|> startProfileAt([-12, -6], %)
|> line(end = [0, 12])
|> line(end = [24, 0], tag = $seg02)
@ -2921,7 +2928,8 @@ chamfer04 = chamfer(extrude001, length = 5, tags = [getOppositeEdge(seg02)])
toolbar,
cmdBar,
}) => {
const initialCode = `sketch001 = startSketchOn(XZ)
const initialCode = `@settings(defaultLengthUnit = in)
sketch001 = startSketchOn(XZ)
|> circle(center = [0, 0], radius = 30)
extrude001 = extrude(sketch001, length = 30)
`
@ -3056,7 +3064,8 @@ extrude001 = extrude(sketch001, length = 30)
toolbar,
cmdBar,
}) => {
const initialCode = `sketch001 = startSketchOn(XY)
const initialCode = `@settings(defaultLengthUnit = in)
sketch001 = startSketchOn(XY)
|> startProfileAt([-20, 20], %)
|> xLine(length = 40)
|> yLine(length = -60)
@ -3174,7 +3183,8 @@ extrude001 = extrude(sketch001, length = 40)
})
const shellSketchOnFacesCases = [
`sketch001 = startSketchOn(XZ)
`@settings(defaultLengthUnit = in)
sketch001 = startSketchOn(XZ)
|> circle(center = [0, 0], radius = 100)
|> extrude(length = 100)
@ -3182,7 +3192,8 @@ sketch002 = startSketchOn(sketch001, 'END')
|> circle(center = [0, 0], radius = 50)
|> extrude(length = 50)
`,
`sketch001 = startSketchOn(XZ)
`@settings(defaultLengthUnit = in)
sketch001 = startSketchOn(XZ)
|> circle(center = [0, 0], radius = 100)
extrude001 = extrude(sketch001, length = 100)
@ -3578,7 +3589,8 @@ radius = 8.69
toolbar,
cmdBar,
}) => {
const initialCode = `sketch001 = startSketchOn(XZ)
const initialCode = `@settings(defaultLengthUnit = in)
sketch001 = startSketchOn(XZ)
profile001 = circle(
sketch001,
center = [0, 0],