update all kcl-samples w/ format (#5999)

rust/kcl-lib/tests/kcl_samples/multi-axis-robot/artifact_graph_flowchart.snap.md

@@ -1,162 +1,162 @@
 ```mermaid
 flowchart LR
   subgraph path2 [Path]
-    2["Path<br>[228, 283, 4]"]
-    3["Segment<br>[289, 351, 4]"]
-    4["Segment<br>[357, 472, 4]"]
-    5["Segment<br>[478, 598, 4]"]
-    6["Segment<br>[604, 689, 4]"]
-    7["Segment<br>[695, 702, 4]"]
+    2["Path<br>[224, 279, 4]"]
+    3["Segment<br>[285, 347, 4]"]
+    4["Segment<br>[353, 468, 4]"]
+    5["Segment<br>[474, 594, 4]"]
+    6["Segment<br>[600, 685, 4]"]
+    7["Segment<br>[691, 698, 4]"]
     8[Solid2d]
   end
   subgraph path28 [Path]
-    28["Path<br>[1137, 1194, 4]"]
-    29["Segment<br>[1137, 1194, 4]"]
+    28["Path<br>[1134, 1191, 4]"]
+    29["Segment<br>[1134, 1191, 4]"]
     30[Solid2d]
   end
   subgraph path36 [Path]
-    36["Path<br>[1413, 1450, 4]"]
-    37["Segment<br>[1413, 1450, 4]"]
+    36["Path<br>[1389, 1426, 4]"]
+    37["Segment<br>[1389, 1426, 4]"]
     38[Solid2d]
   end
   subgraph path44 [Path]
-    44["Path<br>[1582, 1721, 4]"]
-    45["Segment<br>[1582, 1721, 4]"]
+    44["Path<br>[1558, 1698, 4]"]
+    45["Segment<br>[1558, 1698, 4]"]
     46[Solid2d]
   end
   subgraph path54 [Path]
-    54["Path<br>[1966, 2105, 4]"]
-    55["Segment<br>[1966, 2105, 4]"]
+    54["Path<br>[1944, 2084, 4]"]
+    55["Segment<br>[1944, 2084, 4]"]
     56[Solid2d]
   end
   subgraph path65 [Path]
-    65["Path<br>[205, 265, 5]"]
-    66["Segment<br>[205, 265, 5]"]
+    65["Path<br>[203, 263, 5]"]
+    66["Segment<br>[203, 263, 5]"]
     67[Solid2d]
   end
   subgraph path75 [Path]
-    75["Path<br>[516, 552, 5]"]
-    76["Segment<br>[558, 602, 5]"]
-    77["Segment<br>[608, 696, 5]"]
-    78["Segment<br>[702, 751, 5]"]
-    79["Segment<br>[757, 813, 5]"]
-    80["Segment<br>[819, 826, 5]"]
+    75["Path<br>[493, 529, 5]"]
+    76["Segment<br>[535, 579, 5]"]
+    77["Segment<br>[585, 673, 5]"]
+    78["Segment<br>[679, 728, 5]"]
+    79["Segment<br>[734, 790, 5]"]
+    80["Segment<br>[796, 803, 5]"]
     81[Solid2d]
   end
   subgraph path97 [Path]
-    97["Path<br>[923, 1091, 5]"]
-    98["Segment<br>[923, 1091, 5]"]
+    97["Path<br>[900, 1075, 5]"]
+    98["Segment<br>[900, 1075, 5]"]
     99[Solid2d]
   end
   subgraph path105 [Path]
-    105["Path<br>[1316, 1462, 5]"]
-    106["Segment<br>[1316, 1462, 5]"]
+    105["Path<br>[1279, 1426, 5]"]
+    106["Segment<br>[1279, 1426, 5]"]
     107[Solid2d]
   end
   subgraph path116 [Path]
-    116["Path<br>[1778, 1943, 5]"]
-    117["Segment<br>[1778, 1943, 5]"]
+    116["Path<br>[1743, 1917, 5]"]
+    117["Segment<br>[1743, 1917, 5]"]
     118[Solid2d]
   end
   subgraph path125 [Path]
-    125["Path<br>[2189, 2229, 5]"]
-    126["Segment<br>[2189, 2229, 5]"]
+    125["Path<br>[2142, 2182, 5]"]
+    126["Segment<br>[2142, 2182, 5]"]
     127[Solid2d]
   end
   subgraph path137 [Path]
-    137["Path<br>[253, 396, 6]"]
-    138["Segment<br>[402, 518, 6]"]
-    139["Segment<br>[524, 602, 6]"]
-    140["Segment<br>[608, 724, 6]"]
-    141["Segment<br>[730, 786, 6]"]
-    142["Segment<br>[792, 799, 6]"]
+    137["Path<br>[251, 394, 6]"]
+    138["Segment<br>[400, 516, 6]"]
+    139["Segment<br>[522, 600, 6]"]
+    140["Segment<br>[606, 722, 6]"]
+    141["Segment<br>[728, 784, 6]"]
+    142["Segment<br>[790, 797, 6]"]
     143[Solid2d]
   end
   subgraph path159 [Path]
-    159["Path<br>[915, 979, 6]"]
-    160["Segment<br>[915, 979, 6]"]
+    159["Path<br>[913, 977, 6]"]
+    160["Segment<br>[913, 977, 6]"]
     161[Solid2d]
   end
   subgraph path167 [Path]
-    167["Path<br>[1169, 1364, 6]"]
-    168["Segment<br>[1169, 1364, 6]"]
+    167["Path<br>[1146, 1354, 6]"]
+    168["Segment<br>[1146, 1354, 6]"]
     169[Solid2d]
   end
   subgraph path175 [Path]
-    175["Path<br>[1588, 1632, 6]"]
-    176["Segment<br>[1588, 1632, 6]"]
+    175["Path<br>[1557, 1601, 6]"]
+    176["Segment<br>[1557, 1601, 6]"]
     177[Solid2d]
   end
   subgraph path190 [Path]
-    190["Path<br>[1869, 2060, 6]"]
-    191["Segment<br>[1869, 2060, 6]"]
+    190["Path<br>[1839, 2031, 6]"]
+    191["Segment<br>[1839, 2031, 6]"]
     192[Solid2d]
   end
   subgraph path201 [Path]
-    201["Path<br>[2412, 2586, 6]"]
-    202["Segment<br>[2412, 2586, 6]"]
+    201["Path<br>[2384, 2559, 6]"]
+    202["Segment<br>[2384, 2559, 6]"]
     203[Solid2d]
   end
   subgraph path210 [Path]
-    210["Path<br>[273, 506, 7]"]
-    211["Segment<br>[512, 631, 7]"]
-    212["Segment<br>[637, 717, 7]"]
-    213["Segment<br>[723, 842, 7]"]
-    214["Segment<br>[848, 918, 7]"]
-    215["Segment<br>[924, 931, 7]"]
+    210["Path<br>[271, 504, 7]"]
+    211["Segment<br>[510, 629, 7]"]
+    212["Segment<br>[635, 715, 7]"]
+    213["Segment<br>[721, 840, 7]"]
+    214["Segment<br>[846, 916, 7]"]
+    215["Segment<br>[922, 929, 7]"]
     216[Solid2d]
   end
   subgraph path232 [Path]
-    232["Path<br>[1045, 1245, 7]"]
-    233["Segment<br>[1045, 1245, 7]"]
+    232["Path<br>[1043, 1252, 7]"]
+    233["Segment<br>[1043, 1252, 7]"]
     234[Solid2d]
   end
   subgraph path240 [Path]
-    240["Path<br>[1471, 1659, 7]"]
-    241["Segment<br>[1471, 1659, 7]"]
+    240["Path<br>[1457, 1646, 7]"]
+    241["Segment<br>[1457, 1646, 7]"]
     242[Solid2d]
   end
   subgraph path255 [Path]
-    255["Path<br>[2079, 2364, 7]"]
-    256["Segment<br>[2079, 2364, 7]"]
+    255["Path<br>[2067, 2353, 7]"]
+    256["Segment<br>[2067, 2353, 7]"]
     257[Solid2d]
   end
   subgraph path264 [Path]
-    264["Path<br>[2463, 2746, 7]"]
-    265["Segment<br>[2463, 2746, 7]"]
+    264["Path<br>[2452, 2736, 7]"]
+    265["Segment<br>[2452, 2736, 7]"]
     266[Solid2d]
   end
   subgraph path273 [Path]
-    273["Path<br>[2900, 2938, 7]"]
-    274["Segment<br>[2900, 2938, 7]"]
+    273["Path<br>[2890, 2928, 7]"]
+    274["Segment<br>[2890, 2928, 7]"]
     275[Solid2d]
   end
   subgraph path282 [Path]
-    282["Path<br>[3068, 3293, 7]"]
-    283["Segment<br>[3299, 3393, 7]"]
-    284["Segment<br>[3399, 3542, 7]"]
-    285["Segment<br>[3548, 3642, 7]"]
-    286["Segment<br>[3648, 3750, 7]"]
-    287["Segment<br>[3756, 3858, 7]"]
-    288["Segment<br>[3864, 3964, 7]"]
-    289["Segment<br>[3970, 4026, 7]"]
-    290["Segment<br>[4032, 4039, 7]"]
+    282["Path<br>[3058, 3283, 7]"]
+    283["Segment<br>[3289, 3383, 7]"]
+    284["Segment<br>[3389, 3532, 7]"]
+    285["Segment<br>[3538, 3632, 7]"]
+    286["Segment<br>[3638, 3740, 7]"]
+    287["Segment<br>[3746, 3848, 7]"]
+    288["Segment<br>[3854, 3954, 7]"]
+    289["Segment<br>[3960, 4016, 7]"]
+    290["Segment<br>[4022, 4029, 7]"]
     291[Solid2d]
   end
   subgraph path316 [Path]
-    316["Path<br>[4168, 4393, 7]"]
-    317["Segment<br>[4399, 4495, 7]"]
-    318["Segment<br>[4501, 4649, 7]"]
-    319["Segment<br>[4655, 4751, 7]"]
-    320["Segment<br>[4757, 4861, 7]"]
-    321["Segment<br>[4867, 4971, 7]"]
-    322["Segment<br>[4977, 5079, 7]"]
-    323["Segment<br>[5085, 5141, 7]"]
-    324["Segment<br>[5147, 5154, 7]"]
+    316["Path<br>[4158, 4383, 7]"]
+    317["Segment<br>[4389, 4485, 7]"]
+    318["Segment<br>[4491, 4639, 7]"]
+    319["Segment<br>[4645, 4741, 7]"]
+    320["Segment<br>[4747, 4851, 7]"]
+    321["Segment<br>[4857, 4961, 7]"]
+    322["Segment<br>[4967, 5069, 7]"]
+    323["Segment<br>[5075, 5131, 7]"]
+    324["Segment<br>[5137, 5144, 7]"]
     325[Solid2d]
   end
-  1["Plane<br>[203, 222, 4]"]
-  9["Sweep Extrusion<br>[716, 763, 4]"]
+  1["Plane<br>[201, 218, 4]"]
+  9["Sweep Extrusion<br>[712, 759, 4]"]
   10[Wall]
   11[Wall]
   12[Wall]
@@ -171,43 +171,43 @@ flowchart LR
   21["SweepEdge Adjacent"]
   22["SweepEdge Opposite"]
   23["SweepEdge Adjacent"]
-  24["EdgeCut Chamfer<br>[769, 1045, 4]"]
-  25["EdgeCut Chamfer<br>[769, 1045, 4]"]
-  26["EdgeCut Chamfer<br>[769, 1045, 4]"]
-  27["EdgeCut Chamfer<br>[769, 1045, 4]"]
-  31["Sweep Extrusion<br>[1208, 1274, 4]"]
+  24["EdgeCut Chamfer<br>[765, 1042, 4]"]
+  25["EdgeCut Chamfer<br>[765, 1042, 4]"]
+  26["EdgeCut Chamfer<br>[765, 1042, 4]"]
+  27["EdgeCut Chamfer<br>[765, 1042, 4]"]
+  31["Sweep Extrusion<br>[1205, 1271, 4]"]
   32[Wall]
   33["Cap End"]
   34["SweepEdge Opposite"]
   35["SweepEdge Adjacent"]
-  39["Sweep Extrusion<br>[1464, 1494, 4]"]
+  39["Sweep Extrusion<br>[1440, 1470, 4]"]
   40[Wall]
   41["Cap End"]
   42["SweepEdge Opposite"]
   43["SweepEdge Adjacent"]
-  47["Sweep Extrusion<br>[1868, 1915, 4]"]
+  47["Sweep Extrusion<br>[1846, 1893, 4]"]
   48[Wall]
   49["SweepEdge Opposite"]
   50["SweepEdge Adjacent"]
-  51["Sweep Extrusion<br>[1868, 1915, 4]"]
-  52["Sweep Extrusion<br>[1868, 1915, 4]"]
-  53["Sweep Extrusion<br>[1868, 1915, 4]"]
-  57["Sweep Extrusion<br>[2240, 2287, 4]"]
+  51["Sweep Extrusion<br>[1846, 1893, 4]"]
+  52["Sweep Extrusion<br>[1846, 1893, 4]"]
+  53["Sweep Extrusion<br>[1846, 1893, 4]"]
+  57["Sweep Extrusion<br>[2220, 2267, 4]"]
   58[Wall]
   59["SweepEdge Opposite"]
   60["SweepEdge Adjacent"]
-  61["Sweep Extrusion<br>[2240, 2287, 4]"]
-  62["Sweep Extrusion<br>[2240, 2287, 4]"]
-  63["Sweep Extrusion<br>[2240, 2287, 4]"]
-  64["Plane<br>[176, 199, 5]"]
-  68["Sweep Extrusion<br>[279, 317, 5]"]
+  61["Sweep Extrusion<br>[2220, 2267, 4]"]
+  62["Sweep Extrusion<br>[2220, 2267, 4]"]
+  63["Sweep Extrusion<br>[2220, 2267, 4]"]
+  64["Plane<br>[174, 197, 5]"]
+  68["Sweep Extrusion<br>[277, 315, 5]"]
   69[Wall]
   70["Cap Start"]
   71["Cap End"]
   72["SweepEdge Opposite"]
   73["SweepEdge Adjacent"]
-  74["Plane<br>[487, 510, 5]"]
-  82["Sweep Extrusion<br>[841, 871, 5]"]
+  74["Plane<br>[464, 487, 5]"]
+  82["Sweep Extrusion<br>[818, 848, 5]"]
   83[Wall]
   84[Wall]
   85[Wall]
@@ -222,35 +222,35 @@ flowchart LR
   94["SweepEdge Adjacent"]
   95["SweepEdge Opposite"]
   96["SweepEdge Adjacent"]
-  100["Sweep Extrusion<br>[1105, 1137, 5]"]
+  100["Sweep Extrusion<br>[1089, 1121, 5]"]
   101[Wall]
   102["Cap End"]
   103["SweepEdge Opposite"]
   104["SweepEdge Adjacent"]
-  108["Sweep Extrusion<br>[1694, 1726, 5]"]
+  108["Sweep Extrusion<br>[1659, 1691, 5]"]
   109[Wall]
   110["Cap End"]
   111["SweepEdge Opposite"]
   112["SweepEdge Adjacent"]
-  113["Sweep Extrusion<br>[1694, 1726, 5]"]
-  114["Sweep Extrusion<br>[1694, 1726, 5]"]
-  115["Sweep Extrusion<br>[1694, 1726, 5]"]
-  119["Sweep Extrusion<br>[1957, 1990, 5]"]
+  113["Sweep Extrusion<br>[1659, 1691, 5]"]
+  114["Sweep Extrusion<br>[1659, 1691, 5]"]
+  115["Sweep Extrusion<br>[1659, 1691, 5]"]
+  119["Sweep Extrusion<br>[1931, 1964, 5]"]
   120[Wall]
   121["Cap End"]
   122["SweepEdge Opposite"]
   123["SweepEdge Adjacent"]
-  124["Plane<br>[2160, 2183, 5]"]
-  128["Sweep Extrusion<br>[2231, 2262, 5]"]
+  124["Plane<br>[2113, 2136, 5]"]
+  128["Sweep Extrusion<br>[2184, 2215, 5]"]
   129[Wall]
   130["Cap Start"]
   131["Cap End"]
   132["SweepEdge Opposite"]
   133["SweepEdge Adjacent"]
-  134["EdgeCut Fillet<br>[323, 406, 5]"]
-  135["EdgeCut Fillet<br>[1996, 2079, 5]"]
-  136["Plane<br>[224, 247, 6]"]
-  144["Sweep Extrusion<br>[813, 861, 6]"]
+  134["EdgeCut Fillet<br>[321, 383, 5]"]
+  135["EdgeCut Fillet<br>[1970, 2032, 5]"]
+  136["Plane<br>[222, 245, 6]"]
+  144["Sweep Extrusion<br>[811, 859, 6]"]
   145[Wall]
   146[Wall]
   147[Wall]
@@ -265,43 +265,43 @@ flowchart LR
   156["SweepEdge Adjacent"]
   157["SweepEdge Opposite"]
   158["SweepEdge Adjacent"]
-  162["Sweep Extrusion<br>[994, 1027, 6]"]
+  162["Sweep Extrusion<br>[992, 1025, 6]"]
   163[Wall]
   164["Cap End"]
   165["SweepEdge Opposite"]
   166["SweepEdge Adjacent"]
-  170["Sweep Extrusion<br>[1379, 1409, 6]"]
+  170["Sweep Extrusion<br>[1369, 1399, 6]"]
   171[Wall]
   172["Cap End"]
   173["SweepEdge Opposite"]
   174["SweepEdge Adjacent"]
-  178["Sweep Extrusion<br>[1784, 1817, 6]"]
+  178["Sweep Extrusion<br>[1754, 1787, 6]"]
   179[Wall]
   180["Cap End"]
   181["SweepEdge Opposite"]
   182["SweepEdge Adjacent"]
-  183["Sweep Extrusion<br>[1784, 1817, 6]"]
-  184["Sweep Extrusion<br>[1784, 1817, 6]"]
-  185["Sweep Extrusion<br>[1784, 1817, 6]"]
-  186["Sweep Extrusion<br>[1784, 1817, 6]"]
-  187["Sweep Extrusion<br>[1784, 1817, 6]"]
-  188["Sweep Extrusion<br>[1784, 1817, 6]"]
-  189["Sweep Extrusion<br>[1784, 1817, 6]"]
-  193["Sweep Extrusion<br>[2327, 2360, 6]"]
+  183["Sweep Extrusion<br>[1754, 1787, 6]"]
+  184["Sweep Extrusion<br>[1754, 1787, 6]"]
+  185["Sweep Extrusion<br>[1754, 1787, 6]"]
+  186["Sweep Extrusion<br>[1754, 1787, 6]"]
+  187["Sweep Extrusion<br>[1754, 1787, 6]"]
+  188["Sweep Extrusion<br>[1754, 1787, 6]"]
+  189["Sweep Extrusion<br>[1754, 1787, 6]"]
+  193["Sweep Extrusion<br>[2299, 2332, 6]"]
   194[Wall]
   195["Cap End"]
   196["SweepEdge Opposite"]
   197["SweepEdge Adjacent"]
-  198["Sweep Extrusion<br>[2327, 2360, 6]"]
-  199["Sweep Extrusion<br>[2327, 2360, 6]"]
-  200["Sweep Extrusion<br>[2327, 2360, 6]"]
-  204["Sweep Extrusion<br>[2588, 2618, 6]"]
+  198["Sweep Extrusion<br>[2299, 2332, 6]"]
+  199["Sweep Extrusion<br>[2299, 2332, 6]"]
+  200["Sweep Extrusion<br>[2299, 2332, 6]"]
+  204["Sweep Extrusion<br>[2561, 2591, 6]"]
   205[Wall]
   206["Cap End"]
   207["SweepEdge Opposite"]
   208["SweepEdge Adjacent"]
-  209["Plane<br>[244, 267, 7]"]
-  217["Sweep Extrusion<br>[945, 993, 7]"]
+  209["Plane<br>[242, 265, 7]"]
+  217["Sweep Extrusion<br>[943, 991, 7]"]
   218[Wall]
   219[Wall]
   220[Wall]
@@ -316,42 +316,42 @@ flowchart LR
   229["SweepEdge Adjacent"]
   230["SweepEdge Opposite"]
   231["SweepEdge Adjacent"]
-  235["Sweep Extrusion<br>[1260, 1293, 7]"]
+  235["Sweep Extrusion<br>[1267, 1300, 7]"]
   236[Wall]
   237["Cap End"]
   238["SweepEdge Opposite"]
   239["SweepEdge Adjacent"]
-  243["Sweep Extrusion<br>[1923, 1956, 7]"]
+  243["Sweep Extrusion<br>[1911, 1944, 7]"]
   244[Wall]
   245["Cap End"]
   246["SweepEdge Opposite"]
   247["SweepEdge Adjacent"]
-  248["Sweep Extrusion<br>[1923, 1956, 7]"]
-  249["Sweep Extrusion<br>[1923, 1956, 7]"]
-  250["Sweep Extrusion<br>[1923, 1956, 7]"]
-  251["Sweep Extrusion<br>[1923, 1956, 7]"]
-  252["Sweep Extrusion<br>[1923, 1956, 7]"]
-  253["Sweep Extrusion<br>[1923, 1956, 7]"]
-  254["Sweep Extrusion<br>[1923, 1956, 7]"]
-  258["Sweep Extrusion<br>[2378, 2411, 7]"]
+  248["Sweep Extrusion<br>[1911, 1944, 7]"]
+  249["Sweep Extrusion<br>[1911, 1944, 7]"]
+  250["Sweep Extrusion<br>[1911, 1944, 7]"]
+  251["Sweep Extrusion<br>[1911, 1944, 7]"]
+  252["Sweep Extrusion<br>[1911, 1944, 7]"]
+  253["Sweep Extrusion<br>[1911, 1944, 7]"]
+  254["Sweep Extrusion<br>[1911, 1944, 7]"]
+  258["Sweep Extrusion<br>[2367, 2400, 7]"]
   259[Wall]
   260["Cap Start"]
   261["Cap End"]
   262["SweepEdge Opposite"]
   263["SweepEdge Adjacent"]
-  267["Sweep Extrusion<br>[2761, 2794, 7]"]
+  267["Sweep Extrusion<br>[2751, 2784, 7]"]
   268[Wall]
   269["Cap Start"]
   270["Cap End"]
   271["SweepEdge Opposite"]
   272["SweepEdge Adjacent"]
-  276["Sweep Extrusion<br>[2953, 2987, 7]"]
+  276["Sweep Extrusion<br>[2943, 2977, 7]"]
   277[Wall]
   278["Cap Start"]
   279["Cap End"]
   280["SweepEdge Opposite"]
   281["SweepEdge Adjacent"]
-  292["Sweep Extrusion<br>[4054, 4087, 7]"]
+  292["Sweep Extrusion<br>[4044, 4077, 7]"]
   293[Wall]
   294[Wall]
   295[Wall]
@@ -375,7 +375,7 @@ flowchart LR
   313["SweepEdge Adjacent"]
   314["SweepEdge Opposite"]
   315["SweepEdge Adjacent"]
-  326["Sweep Extrusion<br>[5156, 5189, 7]"]
+  326["Sweep Extrusion<br>[5146, 5179, 7]"]
   327[Wall]
   328[Wall]
   329[Wall]
@@ -399,25 +399,25 @@ flowchart LR
   347["SweepEdge Adjacent"]
   348["SweepEdge Opposite"]
   349["SweepEdge Adjacent"]
-  350["StartSketchOnFace<br>[1099, 1131, 4]"]
-  351["StartSketchOnFace<br>[1375, 1407, 4]"]
-  352["StartSketchOnFace<br>[1544, 1576, 4]"]
-  353["StartSketchOnFace<br>[1928, 1960, 4]"]
-  354["StartSketchOnFace<br>[885, 917, 5]"]
-  355["StartSketchOnFace<br>[1278, 1310, 5]"]
-  356["StartSketchOnFace<br>[1740, 1772, 5]"]
-  357["StartSketchOnFace<br>[875, 909, 6]"]
-  358["StartSketchOnFace<br>[1129, 1163, 6]"]
-  359["StartSketchOnFace<br>[1550, 1582, 6]"]
-  360["StartSketchOnFace<br>[1831, 1863, 6]"]
-  361["StartSketchOnFace<br>[2374, 2406, 6]"]
-  362["StartSketchOnFace<br>[1007, 1039, 7]"]
-  363["StartSketchOnFace<br>[1433, 1465, 7]"]
-  364["StartSketchOnFace<br>[2039, 2073, 7]"]
-  365["StartSketchOnFace<br>[2425, 2457, 7]"]
-  366["StartSketchOnFace<br>[2860, 2894, 7]"]
-  367["StartSketchOnFace<br>[3028, 3062, 7]"]
-  368["StartSketchOnFace<br>[4128, 4162, 7]"]
+  350["StartSketchOnFace<br>[1096, 1128, 4]"]
+  351["StartSketchOnFace<br>[1351, 1383, 4]"]
+  352["StartSketchOnFace<br>[1520, 1552, 4]"]
+  353["StartSketchOnFace<br>[1906, 1938, 4]"]
+  354["StartSketchOnFace<br>[862, 894, 5]"]
+  355["StartSketchOnFace<br>[1241, 1273, 5]"]
+  356["StartSketchOnFace<br>[1705, 1737, 5]"]
+  357["StartSketchOnFace<br>[873, 907, 6]"]
+  358["StartSketchOnFace<br>[1106, 1140, 6]"]
+  359["StartSketchOnFace<br>[1519, 1551, 6]"]
+  360["StartSketchOnFace<br>[1801, 1833, 6]"]
+  361["StartSketchOnFace<br>[2346, 2378, 6]"]
+  362["StartSketchOnFace<br>[1005, 1037, 7]"]
+  363["StartSketchOnFace<br>[1419, 1451, 7]"]
+  364["StartSketchOnFace<br>[2027, 2061, 7]"]
+  365["StartSketchOnFace<br>[2414, 2446, 7]"]
+  366["StartSketchOnFace<br>[2850, 2884, 7]"]
+  367["StartSketchOnFace<br>[3018, 3052, 7]"]
+  368["StartSketchOnFace<br>[4118, 4152, 7]"]
   1 --- 2
   2 --- 3
   2 --- 4

rust/kcl-lib/tests/kcl_samples/multi-axis-robot/ops.snap

@@ -67,8 +67,8 @@ description: Operations executed multi-axis-robot.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
-          "value": "XY"
+          "type": "Plane",
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }