update all kcl-samples w/ format (#5999)

public/kcl-samples/80-20-rail/main.kcl

@@ -7,7 +7,7 @@
 // Define function
 fn rail8020(originStart, railHeight, railLength) {
   // Sketch side 1 of profile
-  sketch001 = startSketchOn('-XZ')
+  sketch001 = startSketchOn(-XZ)
     |> startProfileAt([
          originStart[0],
          0.1 * railHeight + originStart[1]
@@ -194,7 +194,7 @@ fn rail8020(originStart, railHeight, railLength) {
            .5 * railHeight + originStart[0],
            .5 * railHeight + originStart[1]
          ],
-         radius = .205 * railHeight / 2
+         radius = .205 * railHeight / 2,
        ), %)
     |> extrude(length = railLength)
     |> fillet(
@@ -216,7 +216,7 @@ fn rail8020(originStart, railHeight, railLength) {
            getNextAdjacentEdge(edge28),
            getNextAdjacentEdge(edge29),
            getNextAdjacentEdge(edge30)
-         ]
+         ],
        )
     |> fillet(
          radius = 0.03,
@@ -237,7 +237,7 @@ fn rail8020(originStart, railHeight, railLength) {
            getNextAdjacentEdge(edge26),
            getNextAdjacentEdge(edge31),
            getNextAdjacentEdge(edge32)
-         ]
+         ],
        )
   return sketch001
 }

public/kcl-samples/a-parametric-bearing-pillow-block/main.kcl

@@ -15,57 +15,37 @@ padding = 1.5
 bearingDia = 3
 
 // (Needs to be updated). Sketch the block and extrude up to where the counterbore diameter starts.
-extrude001 = startSketchOn('XY')
+extrude001 = startSketchOn(XY)
   |> startProfileAt([-width / 2, -length / 2], %)
   |> line(endAbsolute = [width / 2, -length / 2])
   |> line(endAbsolute = [width / 2, length / 2])
   |> line(endAbsolute = [-width / 2, length / 2])
   |> close()
   |> extrude(length = height)
-  
 extrude002 = startSketchOn(extrude001, 'end')
   |> circle(
-      center = [
+       center = [
          -(width / 2 - (padding / 2)),
          -(length / 2 - (padding / 2))
-      ],
+       ],
-      radius = cbDia / 2,
+       radius = cbDia / 2,
      )
-  |> patternLinear2d(
+  |> patternLinear2d(instances = 2, distance = length - padding, axis = [0, 1])
-      instances = 2,
+  |> patternLinear2d(instances = 2, distance = width - padding, axis = [1, 0])
-      distance = length - padding,
-      axis = [0, 1],
-     )
-  |> patternLinear2d(
-      instances = 2,
-      distance = width - padding,
-      axis = [1, 0],
-    )
   |> extrude(%, length = -cbDepth)
 
 extrude003 = startSketchOn(extrude001, 'start')
   |> circle(
-        center = [
+       center = [
-           -(width / 2 - (padding / 2)),
+         -(width / 2 - (padding / 2)),
-           -(length / 2 - (padding / 2))
+         -(length / 2 - (padding / 2))
-        ],
+       ],
-        radius = holeDia / 2,
+       radius = holeDia / 2,
      )
-  |> patternLinear2d(
+  |> patternLinear2d(instances = 2, distance = length - padding, axis = [0, 1])
-      instances = 2,
+  |> patternLinear2d(instances = 2, distance = width - padding, axis = [1, 0])
-      distance = length - padding,
-      axis = [0, 1],
-    )
-  |> patternLinear2d(
-      instances = 2,
-      distance = width - padding,
-      axis = [1, 0],
-    )
   |> extrude(length = -height + cbDepth)
 
 extrude004 = startSketchOn(extrude001, 'end')
-  |> circle(
+  |> circle(center = [0, 0], radius = bearingDia / 2)
-      center = [0, 0],
+  |> extrude(length = -height)
-      radius = bearingDia/2,
-    )
-  |> extrude(length = -height)

public/kcl-samples/ball-bearing/main.kcl

@@ -17,21 +17,15 @@ chainThickness = sphereDia / 8
 linkDiameter = sphereDia / 4
 
 // Sketch the inside bearing piece
-insideWallSketch = startSketchOn(offsetPlane("XY", offset = -overallThickness / 2))
+insideWallSketch = startSketchOn(offsetPlane(XY, offset = -overallThickness / 2))
-  |> circle(
+  |> circle(center = [0, 0], radius = shaftDia / 2 + wallThickness)
-       center = [0, 0],
+  |> hole(circle(center = [0, 0], radius = shaftDia / 2), %)
-       radius = shaftDia / 2 + wallThickness
-     )
-  |> hole(circle(
-       center = [0, 0],
-       radius = shaftDia / 2
-     ), %)
 
 // Extrude the inside bearing piece
 insideWall = extrude(insideWallSketch, length = overallThickness)
 
 // Create the sketch of one of the balls
-ballsSketch = startSketchOn("XY")
+ballsSketch = startSketchOn(XY)
   |> startProfileAt([shaftDia / 2 + wallThickness, 0.001], %)
   |> arc({
        angleEnd = 0,
@@ -47,11 +41,11 @@ balls = revolve(ballsSketch, axis = "X")
        axis = [0, 0, 1],
        center = [0, 0, 0],
        instances = nBalls,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 
 // Create the sketch for the chain around the balls
-chainSketch = startSketchOn("XY")
+chainSketch = startSketchOn(XY)
   |> startProfileAt([
        shaftDia / 2 + wallThickness + sphereDia / 2 - (chainWidth / 2),
        0.125 * sin(toRadians(60))
@@ -72,17 +66,17 @@ chainHead = revolve(chainSketch, axis = "X")
        axis = [0, 0, 1],
        center = [0, 0, 0],
        instances = nBalls,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 
 // Create the sketch for the links in between the chains
-linkSketch = startSketchOn("XZ")
+linkSketch = startSketchOn(XZ)
   |> circle(
        center = [
          shaftDia / 2 + wallThickness + sphereDia / 2,
          0
        ],
-       radius = linkDiameter / 2
+       radius = linkDiameter / 2,
      )
 
 // Revolve the link sketch
@@ -92,19 +86,13 @@ linkRevolve = revolve(linkSketch, axis = 'Y', angle = 360 / nBalls)
        axis = [0, 0, 1],
        center = [0, 0, 0],
        instances = nBalls,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 
 // Create the sketch for the outside walls
-outsideWallSketch = startSketchOn(offsetPlane("XY", offset = -overallThickness / 2))
+outsideWallSketch = startSketchOn(offsetPlane(XY, offset = -overallThickness / 2))
-  |> circle(
+  |> circle(center = [0, 0], radius = outsideDiameter / 2)
-       center = [0, 0],
+  |> hole(circle(center = [0, 0], radius = shaftDia / 2 + wallThickness + sphereDia), %)
-       radius = outsideDiameter / 2
-     )
-  |> hole(circle(
-       center = [0, 0],
-       radius = shaftDia / 2 + wallThickness + sphereDia
-     ), %)
 
 outsideWall = extrude(outsideWallSketch, length = overallThickness)
 

public/kcl-samples/bench/bench-parts.kcl

@@ -130,7 +130,7 @@ fn armRestProfile(plane, offset) {
 
 export fn armRest(plane, offset) {
   path = armRestPath(  offsetPlane(plane, offset = offset))
-  profile = armRestProfile(  offsetPlane("-XZ", offset = 20), offset)
+  profile = armRestProfile(  offsetPlane(-XZ, offset = 20), offset)
   sweep(profile, path = path)
   return 0
 }

public/kcl-samples/bench/main.kcl

@@ -16,19 +16,19 @@ import backSlats from "bench-parts.kcl"
 import armRest from "bench-parts.kcl"
 
 // Create the dividers, these hold the seat and back slats
-divider("YZ")
+divider(YZ)
-divider(offsetPlane("-YZ", offset = benchLength / 2))
+divider(offsetPlane(-YZ, offset = benchLength / 2))
-divider(offsetPlane("YZ", offset = benchLength / 2))
+divider(offsetPlane(YZ, offset = benchLength / 2))
 
 // Create the connectors to join the dividers
-connector(offsetPlane("YZ", offset = -benchLength / 2), benchLength)
+connector(offsetPlane(YZ, offset = -benchLength / 2), benchLength)
 
 // Create the seat slats
-seatSlats(offsetPlane("YZ", offset = -benchLength / 2 - dividerThickness / 2), benchLength + dividerThickness)
+seatSlats(offsetPlane(YZ, offset = -benchLength / 2 - (dividerThickness / 2)), benchLength + dividerThickness)
 
 // Create the back slats
-backSlats(offsetPlane("YZ", offset = -benchLength / 2 - dividerThickness / 2), benchLength + dividerThickness)
+backSlats(offsetPlane(YZ, offset = -benchLength / 2 - (dividerThickness / 2)), benchLength + dividerThickness)
 
 // Create the arm rests
-armRest("-YZ", benchLength / 2)
+armRest(-YZ, benchLength / 2)
-armRest("-YZ", -benchLength / 2)
+armRest(-YZ, -benchLength / 2)

public/kcl-samples/bracket/main.kcl

@@ -1,7 +1,6 @@
 // Shelf Bracket
 // This is a bracket that holds a shelf. It is made of aluminum and is designed to hold a force of 300 lbs. The bracket is 6 inches wide and the force is applied at the end of the shelf, 12 inches from the wall. The bracket has a factor of safety of 1.2. The legs of the bracket are 5 inches and 2 inches long. The thickness of the bracket is calculated from the constraints provided.
 
-
 // Define constants
 sigmaAllow = 35000 // psi (6061-T6 aluminum)
 width = 6 // inch
@@ -12,14 +11,16 @@ wallMountL = 2 // inches
 shelfDepth = 12 // Shelf is 12 inches in depth from the wall
 moment = shelfDepth * p // assume the force is applied at the end of the shelf to be conservative (lb-in)
 
+
 // Calculate required thickness of bracket
 thickness = sqrt(moment * factorOfSafety * 6 / (sigmaAllow * width)) // this is the calculation of two brackets holding up the shelf (inches)
 
+
 filletRadius = .25
 extFilletRadius = filletRadius + thickness
 mountingHoleDiameter = 0.5
 
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> xLine(length = shelfMountL - thickness, tag = $seg01)
   |> yLine(length = thickness, tag = $seg02)
@@ -29,48 +30,18 @@ sketch001 = startSketchOn('XZ')
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg06)
   |> close()
   |> extrude(%, length = width)
-  |> fillet(
+  |> fillet(radius = extFilletRadius, tags = [getNextAdjacentEdge(seg03)])
-       radius = extFilletRadius,
+  |> fillet(radius = filletRadius, tags = [getNextAdjacentEdge(seg06)])
-       tags = [getNextAdjacentEdge(seg03)],
+  |> fillet(radius = filletRadius, tags = [seg02, getOppositeEdge(seg02)])
-     )
+  |> fillet(radius = filletRadius, tags = [seg05, getOppositeEdge(seg05)])
-  |> fillet(
-       radius = filletRadius,
-       tags = [getNextAdjacentEdge(seg06)],
-     )
-  |> fillet(
-      radius = filletRadius,
-      tags = [seg02, getOppositeEdge(seg02)],
-    )
-  |> fillet(
-      radius = filletRadius,
-      tags = [seg05, getOppositeEdge(seg05)],
-    )
 
 sketch002 = startSketchOn(sketch001, seg03)
-  |> circle(
+  |> circle(center = [-1.25, 1], radius = mountingHoleDiameter / 2)
-    center = [-1.25, 1],
+  |> patternLinear2d(instances = 2, distance = 2.5, axis = [-1, 0])
-    radius = mountingHoleDiameter / 2,
+  |> patternLinear2d(instances = 2, distance = 4, axis = [0, 1])
-  )
+  |> extrude(%, length = -thickness - .01)
-  |> patternLinear2d(
-    instances = 2,
-    distance = 2.5,
-    axis = [-1, 0],
-  )
-  |> patternLinear2d(
-    instances = 2,
-    distance = 4,
-    axis = [0, 1],
-  )
-  |> extrude(%, length = -thickness-.01)
 
 sketch003 = startSketchOn(sketch001, seg04)
-  |> circle(
+  |> circle(center = [1, -1], radius = mountingHoleDiameter / 2)
-    center = [1, -1],
+  |> patternLinear2d(instances = 2, distance = 4, axis = [1, 0])
-    radius = mountingHoleDiameter / 2,
+  |> extrude(%, length = -thickness - 0.1)
-  )
-  |> patternLinear2d(
-    instances = 2,
-    distance = 4,
-    axis = [1, 0],
-  )
-  |> extrude(%, length = -thickness-0.1)

public/kcl-samples/car-wheel-assembly/brake-caliper.kcl

@@ -1,16 +1,14 @@
 // Brake Caliper
 // Brake calipers are used to squeeze the brake pads against the rotor, causing larger and larger amounts of friction depending on how hard the brakes are pressed.
 
-
 // Set units
 @settings(defaultLengthUnit = in)
 
-
 // Import Constants
 import caliperTolerance, caliperPadLength, caliperThickness, caliperOuterEdgeRadius, caliperInnerEdgeRadius, rotorDiameter, rotorTotalThickness, yAxisOffset from "globals.kcl"
 
 // Sketch the brake caliper profile
-brakeCaliperSketch = startSketchOn('XY')
+brakeCaliperSketch = startSketchOn(XY)
   |> startProfileAt([
        rotorDiameter / 2 + caliperTolerance,
        0

public/kcl-samples/car-wheel-assembly/car-rotor.kcl

@@ -1,39 +1,28 @@
 // Wheel rotor
 // A component of a disc brake system. It provides a surface for brake pads to press against, generating the friction needed to slow or stop the vehicle.
 
-
 // Set units
 @settings(defaultLengthUnit = in)
 
-
 // Import Constants
 import rotorDiameter, rotorInnerDiameter, rotorSinglePlateThickness, rotorInnerDiameterThickness, lugHolePatternDia, lugSpacing, rotorTotalThickness, spacerPatternDiameter, spacerDiameter, spacerLength, spacerCount, wheelDiameter, lugCount, yAxisOffset, drillAndSlotCount from "globals.kcl"
 
-rotorSketch = startSketchOn('XZ')
+rotorSketch = startSketchOn(XZ)
-  |> circle(
+  |> circle(center = [0, 0], radius = rotorDiameter / 2)
-       center = [0, 0],
-       radius = rotorDiameter / 2
-     )
 rotor = extrude(rotorSketch, length = rotorSinglePlateThickness)
   |> appearance(color = "#dbcd70", roughness = 90, metalness = 90)
 
 rotorBumpSketch = startSketchOn(rotor, 'end')
-  |> circle(
+  |> circle(center = [0, 0], radius = rotorInnerDiameter / 2)
-       center = [0, 0],
-       radius = rotorInnerDiameter / 2
-     )
 rotorBump = extrude(rotorBumpSketch, length = rotorInnerDiameterThickness)
 
 lugHoles = startSketchOn(rotorBump, 'end')
-  |> circle(
+  |> circle(center = [-lugSpacing / 2, 0], radius = 0.315)
-       center = [-lugSpacing / 2, 0],
-       radius = 0.315
-     )
   |> patternCircular2d(
        arcDegrees = 360,
        center = [0, 0],
        instances = lugCount,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
   |> extrude(%, length = -(rotorInnerDiameterThickness + rotorSinglePlateThickness))
   |> appearance(color = "#dbcd70", roughness = 90, metalness = 90)
@@ -44,35 +33,26 @@ centerSpacer = startSketchOn(rotor, 'start')
   |> extrude(%, length = spacerLength)
 
 secondaryRotorSketch = startSketchOn(centerSpacer, 'end')
-  |> circle(
+  |> circle(center = [0, 0], radius = rotorDiameter / 2)
-       center = [0, 0],
-       radius = rotorDiameter / 2
-     )
 secondRotor = extrude(secondaryRotorSketch, length = rotorSinglePlateThickness)
 
 lugHoles2 = startSketchOn(secondRotor, 'end')
-  |> circle(
+  |> circle(center = [-lugSpacing / 2, 0], radius = 0.315)
-       center = [-lugSpacing / 2, 0],
-       radius = 0.315
-     )
   |> patternCircular2d(
        arcDegrees = 360,
        center = [0, 0],
        instances = lugCount,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
   |> extrude(length = -rotorSinglePlateThickness)
 
 spacerSketch = startSketchOn(rotor, 'start')
-  |> circle(
+  |> circle(center = [spacerPatternDiameter / 2, 0], radius = spacerDiameter)
-       center = [spacerPatternDiameter / 2, 0],
-       radius = spacerDiameter
-     )
   |> patternCircular2d(
        arcDegrees = 360,
        center = [0, 0],
        instances = spacerCount,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 spacers = extrude(spacerSketch, length = spacerLength)
 
@@ -87,7 +67,7 @@ rotorSlottedSketch = startSketchOn(rotor, 'START')
        center = [0, 0],
        instances = drillAndSlotCount,
        arcDegrees = 360,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 rotorSlotted = extrude(rotorSlottedSketch, length = -rotorSinglePlateThickness / 2)
 
@@ -102,7 +82,7 @@ secondRotorSlottedSketch = startSketchOn(secondRotor, 'END')
        center = [0, 0],
        instances = drillAndSlotCount,
        arcDegrees = 360,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 
 extrude(secondRotorSlottedSketch, length = -rotorSinglePlateThickness / 2)

public/kcl-samples/car-wheel-assembly/car-tire.kcl

@@ -1,21 +1,22 @@
 // Tire
 // A tire is a critical component of a vehicle that provides the necessary traction and grip between the car and the road. It supports the vehicle's weight and absorbs shocks from road irregularities.
 
-
 // Set units
 @settings(defaultLengthUnit = in)
 
-
 // Import Constants
 import tireInnerDiameter, tireOuterDiameter, tireDepth, bendRadius, tireTreadWidth, tireTreadDepth, tireTreadOffset from "globals.kcl"
 
 // Create the sketch of the tire
-tireSketch = startSketchOn("XY")
+tireSketch = startSketchOn(XY)
   |> startProfileAt([tireInnerDiameter / 2, tireDepth / 2], %)
-  |> line(endAbsolute = [
+  |> line(
-       tireOuterDiameter / 2 - bendRadius,
+       endAbsolute = [
-       tireDepth / 2
+         tireOuterDiameter / 2 - bendRadius,
-     ], tag = $edge1)
+         tireDepth / 2
+       ],
+       tag = $edge1,
+     )
   |> tangentialArc({ offset = -90, radius = bendRadius }, %)
   |> line(endAbsolute = [
        tireOuterDiameter / 2,

public/kcl-samples/car-wheel-assembly/car-wheel.kcl

@@ -1,69 +1,49 @@
 // Car Wheel
 // A sports car wheel with a circular lug pattern and spokes.
 
-
 // Set units
 @settings(defaultLengthUnit = in)
 
-
 // Import Constants
 import lugCount, lugSpacing, offset, backSpacing, wheelWidth, wheelDiameter, spokeCount, spokeGap, spokeAngle, spokeThickness from "globals.kcl"
 
 // Create the wheel center
-lugBase = startSketchOn('XZ')
+lugBase = startSketchOn(XZ)
-  |> circle(
+  |> circle(center = [0, 0], radius = (lugSpacing + 1.5) / 2)
-       center = [0, 0],
+  |> hole(circle(center = [0, 0], radius = (lugSpacing - 1.5) / 2), %)
-       radius = (lugSpacing + 1.5) / 2
-     )
-  |> hole(circle(
-       center = [0, 0],
-       radius = (lugSpacing - 1.5) / 2
-     ), %)
   |> extrude(length = wheelWidth / 20)
 
 // Extend the wheel center and bore holes to accomidate the lug heads
 lugExtrusion = startSketchOn(lugBase, 'END')
-  |> circle(
+  |> circle(center = [0, 0], radius = (lugSpacing + 1.5) / 2)
-       center = [0, 0],
+  |> hole(circle(center = [0, 0], radius = (lugSpacing - 1.5) / 2), %)
-       radius = (lugSpacing + 1.5) / 2
-     )
-  |> hole(circle(
-       center = [0, 0],
-       radius = (lugSpacing - 1.5) / 2
-     ), %)
   |> extrude(length = wheelWidth / 10)
 
 // Create the circular pattern for the lugs
 lugClearance = startSketchOn(lugExtrusion, 'END')
-  |> circle(
+  |> circle(center = [lugSpacing / 2, 0], radius = 1.2 / 2)
-       center = [lugSpacing / 2, 0],
-       radius = 1.2 / 2
-     )
   |> patternCircular2d(
        arcDegrees = 360,
        center = [0, 0],
        instances = lugCount,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
   |> extrude(length = -wheelWidth / 10)
 
 // Create the circular pattern for the lug holes
 lugHoles = startSketchOn(lugBase, 'END')
-  |> circle(
+  |> circle(center = [lugSpacing / 2, 0], radius = 16 * mm() / 2)
-       center = [lugSpacing / 2, 0],
-       radius = 16 * mm() / 2
-     )
   |> patternCircular2d(
        arcDegrees = 360,
        center = [0, 0],
        instances = lugCount,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
   |> extrude(length = -wheelWidth / 20)
   |> appearance(color = "#ffffff", metalness = 0, roughness = 0)
 
 // Add detail to the wheel center by revolving curved edge profiles
-wheelCenterInner = startSketchOn('XY')
+wheelCenterInner = startSketchOn(XY)
   |> startProfileAt([(lugSpacing - 1.5) / 2, 0], %)
   |> yLine(length = -wheelWidth / 10 - (wheelWidth / 20))
   |> bezierCurve({
@@ -77,7 +57,7 @@ wheelCenterInner = startSketchOn('XY')
   |> revolve(axis = 'y')
   |> appearance(color = "#ffffff", metalness = 0, roughness = 0)
 
-wheelCenterOuter = startSketchOn('XY')
+wheelCenterOuter = startSketchOn(XY)
   |> startProfileAt([(lugSpacing + 1.5) / 2, 0], %)
   |> yLine(length = -wheelWidth / 10 - (wheelWidth / 20))
   |> bezierCurve({
@@ -145,7 +125,7 @@ fn spoke(spokeGap, spokeAngle, spokeThickness) {
          center = [0, -2000, 0],
          instances = spokeCount,
          arcDegrees = 360,
-         rotateDuplicates = true
+         rotateDuplicates = true,
        )
     |> appearance(color = "#ffffff", metalness = 0, roughness = 0)
   return spokePattern
@@ -155,7 +135,7 @@ spoke(spokeGap, spokeAngle, spokeThickness)
 spoke(-spokeGap, -spokeAngle, -spokeThickness)
 
 // Define and revolve wheel exterior
-startSketchOn('XY')
+startSketchOn(XY)
   |> startProfileAt([
        wheelDiameter / 2,
        -wheelWidth + backSpacing + offset

public/kcl-samples/car-wheel-assembly/globals.kcl

@@ -20,7 +20,7 @@ export lugDiameter = 24 * mm()
 export lugHeadLength = lugDiameter * .5
 export lugThreadDiameter = lugDiameter / 2 * .85
 export lugLength = 30 * mm()
-export lugThreadDepth = lugLength - 12.7 * mm()
+export lugThreadDepth = lugLength - (12.7 * mm())
 
 // Car Rotor
 export rotorDiameter = 12
@@ -50,4 +50,4 @@ export caliperTolerance = 0.050
 export caliperPadLength = 1.6
 export caliperThickness = 0.39
 export caliperOuterEdgeRadius = 0.39
-export caliperInnerEdgeRadius = 0.12
+export caliperInnerEdgeRadius = 0.12

public/kcl-samples/car-wheel-assembly/lug-nut.kcl

@@ -1,11 +1,9 @@
 // Lug Nut
 // lug Nuts are essential components used to create secure connections, whether for electrical purposes, like terminating wires or grounding, or for mechanical purposes, such as providing mounting points or reinforcing structural joints.
 
-
 // Set units
 @settings(defaultLengthUnit = in)
 
-
 // Import Constants
 import lugDiameter, lugHeadLength, lugThreadDiameter, lugLength, lugThreadDepth, lugSpacing from "globals.kcl"
 

public/kcl-samples/car-wheel-assembly/main.kcl

@@ -4,24 +4,24 @@
 // Set units
 @settings(defaultLengthUnit = in)
 
-import 'car-wheel.kcl' as carWheel
+import "car-wheel.kcl" as carWheel
-import 'car-rotor.kcl' as carRotor
+import "car-rotor.kcl" as carRotor
 import "brake-caliper.kcl" as brakeCaliper
-import 'lug-nut.kcl' as lugNut
+import "lug-nut.kcl" as lugNut
-import 'car-tire.kcl' as carTire
+import "car-tire.kcl" as carTire
-import lugCount from 'globals.kcl'
+import lugCount from "globals.kcl"
 
 carRotor
   |> translate(translate = [0, 0.5, 0])
 carWheel
 lugNut
   |> patternCircular3d(
-     arcDegrees = 360,
+       arcDegrees = 360,
-     axis = [0, 1, 0],
+       axis = [0, 1, 0],
-     center = [0, 0, 0],
+       center = [0, 0, 0],
-     instances = lugCount,
+       instances = lugCount,
-     rotateDuplicates = false
+       rotateDuplicates = false,
-   )
+     )
 brakeCaliper
   |> translate(translate = [0, 0.5, 0])
 carTire

public/kcl-samples/color-cube/main.kcl

@@ -6,42 +6,42 @@
 
 // Globals referenced in drawRectangle
 size = 100
-halfSize = size/2
+halfSize = size / 2
 extrudeLength = 1.0
 metalConstant = 50
 roughnessConstant = 50
 
 // Create planes for 6 sides of a cube
-bluePlane = offsetPlane('XY', offset = halfSize)
+bluePlane = offsetPlane(XY, offset = halfSize)
-yellowPlane = offsetPlane('XY', offset = -halfSize)
+yellowPlane = offsetPlane(XY, offset = -halfSize)
-greenPlane = offsetPlane('XZ', offset = -halfSize)
+greenPlane = offsetPlane(XZ, offset = -halfSize)
-purplePlane = offsetPlane('-XZ', offset = -halfSize)
+purplePlane = offsetPlane(-XZ, offset = -halfSize)
-redPlane = offsetPlane('YZ', offset = halfSize - extrudeLength)
+redPlane = offsetPlane(YZ, offset = halfSize - extrudeLength)
-tealPlane = offsetPlane('YZ', offset = -halfSize)
+tealPlane = offsetPlane(YZ, offset = -halfSize)
 
 // Sketch a rectangle centered at the origin of the profile
-fn sketchRectangle (profile, color) {
+fn sketchRectangle(profile, color) {
   return profile
-  |> startProfileAt([-halfSize, halfSize], %)
+    |> startProfileAt([-halfSize, halfSize], %)
-  |> angledLine([0, size], %, $rectangleSegmentA001)
+    |> angledLine([0, size], %, $rectangleSegmentA001)
-  |> angledLine([
+    |> angledLine([
-       segAng(rectangleSegmentA001) - 90,
+         segAng(rectangleSegmentA001) - 90,
-       size
+         size
-     ], %, $rectangleSegmentB001)
+       ], %, $rectangleSegmentB001)
-  |> angledLine([
+    |> angledLine([
-       segAng(rectangleSegmentA001),
+         segAng(rectangleSegmentA001),
-       -segLen(rectangleSegmentA001)
+         -segLen(rectangleSegmentA001)
-     ], %, $rectangleSegmentC001)
+       ], %, $rectangleSegmentC001)
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close()
+    |> close()
-  |> extrude(%, length = extrudeLength)
+    |> extrude(%, length = extrudeLength)
-  |> appearance(color = color, metalness = metalConstant, roughness = roughnessConstant)
+    |> appearance(color = color, metalness = metalConstant, roughness = roughnessConstant)
 }
 
 // Sketch each side of the cube
-sketchRectangle(bluePlane,'#0000FF')
+sketchRectangle(bluePlane, '#0000FF')
-sketchRectangle(yellowPlane,'#FFFF00')
+sketchRectangle(yellowPlane, '#FFFF00')
-sketchRectangle(greenPlane,'#00FF00')
+sketchRectangle(greenPlane, '#00FF00')
-sketchRectangle(redPlane,'#FF0000')
+sketchRectangle(redPlane, '#FF0000')
-sketchRectangle(tealPlane,'#00FFFF')
+sketchRectangle(tealPlane, '#00FFFF')
-sketchRectangle(purplePlane,'#FF00FF')
+sketchRectangle(purplePlane, '#FF00FF')

public/kcl-samples/cycloidal-gear/main.kcl

@@ -4,12 +4,11 @@
 // Set Units
 @settings(defaultLengthUnit = in)
 
-
 fn cycloidalGear(gearPitch, gearHeight, holeDiameter, helixAngle) {
   // Create a function to draw the gear profile as a sketch. Rotate each profile about the gear's axis by an helix angle proportional to the total gear height
   fn gearSketch(gHeight) {
     helixAngleP = helixAngle * gHeight / gearHeight
-    gearProfile = startSketchOn(offsetPlane("XY", offset = gHeight))
+    gearProfile = startSketchOn(offsetPlane(XY, offset = gHeight))
       |> startProfileAt([
            gearPitch * 1.55 * cos(toRadians(helixAngleP)) + gearPitch * sin(toRadians(-helixAngleP)),
            gearPitch * 1.55 * sin(toRadians(helixAngleP)) + gearPitch * cos(toRadians(-helixAngleP))
@@ -31,10 +30,7 @@ fn cycloidalGear(gearPitch, gearHeight, holeDiameter, helixAngle) {
       |> tangentialArc({ radius = gearPitch, offset = -180 }, %)
       |> tangentialArcTo([profileStartX(%), profileStartY(%)], %)
       |> close(%)
-      |> hole(circle(
+      |> hole(circle(center = [0, 0], radius = holeDiameter / 2), %)
-           center = [0, 0],
-           radius = holeDiameter / 2
-         ), %)
     return gearProfile
   }
 

public/kcl-samples/dodecahedron/main.kcl

@@ -39,7 +39,7 @@ plane = {
 }
 
 // Create a regular pentagon inscribed in a circle of radius pentR
-bottomFace = startSketchOn('XY')
+bottomFace = startSketchOn(XY)
   |> polygon({
        radius = pentR,
        numSides = 5,
@@ -66,7 +66,7 @@ bottomBowl = patternCircular3d(
   axis = [0, 0, 1],
   center = [0, 0, 0],
   arcDegrees = 360,
-  rotateDuplicates = true
+  rotateDuplicates = true,
 )
 
 // pattern the bottom to create the top face
@@ -76,7 +76,7 @@ patternCircular3d(
   axis = [0, 1, 0],
   center = [0, 0, inscR],
   arcDegrees = 360,
-  rotateDuplicates = true
+  rotateDuplicates = true,
 )
 
 // pattern the bottom angled faces to create the top
@@ -86,5 +86,5 @@ patternCircular3d(
   axis = [0, 1, 0],
   center = [0, 0, inscR],
   arcDegrees = 360,
-  rotateDuplicates = true
+  rotateDuplicates = true,
 )

public/kcl-samples/enclosure/main.kcl

@@ -11,7 +11,7 @@ wallThickness = 3
 holeDia = 4
 
 // Model a box with base enclosure dimensions
-sketch001 = startSketchOn('XY')
+sketch001 = startSketchOn(XY)
   |> startProfileAt([0, 0], %)
   |> angledLine([0, width], %, $rectangleSegmentA001)
   |> angledLine([
@@ -32,14 +32,11 @@ extrude001 = extrude(sketch001, length = height)
          getNextAdjacentEdge(rectangleSegmentB001),
          getNextAdjacentEdge(rectangleSegmentC001),
          getNextAdjacentEdge(rectangleSegmentD001)
-       ]
+       ],
      )
 
   // Apply a shell to the enclosure base to create the internal storage
-  |> shell(
+  |> shell(faces = ["end"], thickness = wallThickness)
-       faces = ["end"],
-       thickness = wallThickness
-     )
 
 // Define a function to create the internal structure to secure a fastener at each corner
 fn function001(originStart) {
@@ -55,14 +52,8 @@ fn function001(originStart) {
 
   // Create a pillar with a fasterner hole at the center
   sketch002 = startSketchOn(plane001)
-    |> circle(
+    |> circle(center = [originStart[0], originStart[1]], radius = holeDia + wallThickness)
-         center = [originStart[0], originStart[1]],
+    |> hole(circle(center = [originStart[0], originStart[1]], radius = holeDia), %)
-         radius = holeDia + wallThickness
-       )
-    |> hole(circle(
-         center = [originStart[0], originStart[1]],
-         radius = holeDia
-       ), %)
   extrude002 = extrude(sketch002, length = height - wallThickness)
 
   return extrude002
@@ -87,7 +78,7 @@ function001([
 ])
 
 // Define lid position and outer surface
-sketch003 = startSketchOn('XY')
+sketch003 = startSketchOn(XY)
   |> startProfileAt([width * 1.2, 0], %)
   |> angledLine([0, width], %, $rectangleSegmentA002)
   |> angledLine([
@@ -105,28 +96,28 @@ sketch003 = startSketchOn('XY')
          width * 1.2 + wallThickness * 3 + holeDia,
          wallThickness * 3 + holeDia
        ],
-       radius = holeDia
+       radius = holeDia,
      ), %)
   |> hole(circle(
        center = [
          width * 1.2 + wallThickness * 3 + holeDia,
          length - (wallThickness * 3 + holeDia)
        ],
-       radius = holeDia
+       radius = holeDia,
      ), %)
   |> hole(circle(
        center = [
          width * 2.2 - (wallThickness * 3 + holeDia),
          wallThickness * 3 + holeDia
        ],
-       radius = holeDia
+       radius = holeDia,
      ), %)
   |> hole(circle(
        center = [
          width * 2.2 - (wallThickness * 3 + holeDia),
          length - (wallThickness * 3 + holeDia)
        ],
-       radius = holeDia
+       radius = holeDia,
      ), %)
 extrude003 = extrude(sketch003, length = wallThickness)
   |> fillet(
@@ -136,7 +127,7 @@ extrude003 = extrude(sketch003, length = wallThickness)
          getNextAdjacentEdge(rectangleSegmentB002),
          getNextAdjacentEdge(rectangleSegmentC002),
          getNextAdjacentEdge(rectangleSegmentD002)
-       ]
+       ],
      )
 
 // Define lid inner and sealing surfaces
@@ -161,28 +152,28 @@ sketch004 = startSketchOn(extrude003, 'END')
          width * 1.2 + wallThickness * 3 + holeDia,
          wallThickness * 3 + holeDia
        ],
-       radius = holeDia + wallThickness
+       radius = holeDia + wallThickness,
      ), %)
   |> hole(circle(
        center = [
          width * 1.2 + wallThickness * 3 + holeDia,
          length - (wallThickness * 3 + holeDia)
        ],
-       radius = holeDia + wallThickness
+       radius = holeDia + wallThickness,
      ), %)
   |> hole(circle(
        center = [
          width * 2.2 - (wallThickness * 3 + holeDia),
          wallThickness * 3 + holeDia
        ],
-       radius = holeDia + wallThickness
+       radius = holeDia + wallThickness,
      ), %)
   |> hole(circle(
        center = [
          width * 2.2 - (wallThickness * 3 + holeDia),
          length - (wallThickness * 3 + holeDia)
        ],
-       radius = holeDia + wallThickness
+       radius = holeDia + wallThickness,
      ), %)
 extrude004 = extrude(sketch004, length = wallThickness)
   |> fillet(
@@ -192,5 +183,5 @@ extrude004 = extrude(sketch004, length = wallThickness)
          getNextAdjacentEdge(rectangleSegmentB003),
          getNextAdjacentEdge(rectangleSegmentC003),
          getNextAdjacentEdge(rectangleSegmentD003)
-       ]
+       ],
      )

public/kcl-samples/exhaust-manifold/main.kcl

@@ -45,15 +45,9 @@ fn primaryTube(n, angle001, length001, length002, length003) {
        }, %)
 
   // Create the cross section of each tube and sweep them
-  sweepProfile = startSketchOn('XY')
+  sweepProfile = startSketchOn(XY)
-    |> circle(
+    |> circle(center = [pos001, 0], radius = primaryTubeDiameter / 2)
-         center = [pos001, 0],
+    |> hole(circle(center = [pos001, 0], radius = primaryTubeDiameter / 2 - wallThickness), %)
-         radius = primaryTubeDiameter / 2
-       )
-    |> hole(circle(
-         center = [pos001, 0],
-         radius = primaryTubeDiameter / 2 - wallThickness
-       ), %)
     |> sweep(path = sweepPath)
 
   return {  }
@@ -66,7 +60,7 @@ primaryTube(2, 24.3, 5, 5, 3)
 primaryTube(3, 25.2, 5, 5, 3)
 
 // Create the mounting flange for the header
-flangeSketch = startSketchOn('XY')
+flangeSketch = startSketchOn(XY)
   |> startProfileAt([3 + 1.3, -1.25], %)
   |> xLine(length = -2.6, tag = $seg01)
   |> tangentialArc({ radius = .3, offset = -40 }, %)
@@ -87,22 +81,10 @@ flangeSketch = startSketchOn('XY')
   |> close()
 
   // Create openings in the flange to accommodate each tube
-  |> hole(circle(
+  |> hole(circle(center = [0, 0], radius = primaryTubeDiameter / 2 - wallThickness), %)
-       center = [0, 0],
+  |> hole(circle(center = [2, 0], radius = primaryTubeDiameter / 2 - wallThickness), %)
-       radius = primaryTubeDiameter / 2 - wallThickness
+  |> hole(circle(center = [4, 0], radius = primaryTubeDiameter / 2 - wallThickness), %)
-     ), %)
+  |> hole(circle(center = [6, 0], radius = primaryTubeDiameter / 2 - wallThickness), %)
-  |> hole(circle(
-       center = [2, 0],
-       radius = primaryTubeDiameter / 2 - wallThickness
-     ), %)
-  |> hole(circle(
-       center = [4, 0],
-       radius = primaryTubeDiameter / 2 - wallThickness
-     ), %)
-  |> hole(circle(
-       center = [6, 0],
-       radius = primaryTubeDiameter / 2 - wallThickness
-     ), %)
 
   // Add mounting holes to the flange
   |> hole(circle(
@@ -110,28 +92,28 @@ flangeSketch = startSketchOn('XY')
          -primaryTubeDiameter * .6,
          -primaryTubeDiameter * .6
        ],
-       radius = 0.25 / 2
+       radius = 0.25 / 2,
      ), %)
   |> hole(circle(
        center = [
          primaryTubeDiameter * .6,
          primaryTubeDiameter * .6
        ],
-       radius = 0.25 / 2
+       radius = 0.25 / 2,
      ), %)
   |> hole(circle(
        center = [
          3 * 2 - (primaryTubeDiameter * .6),
          primaryTubeDiameter * .6
        ],
-       radius = 0.25 / 2
+       radius = 0.25 / 2,
      ), %)
   |> hole(circle(
        center = [
          3 * 2 + primaryTubeDiameter * .6,
          -primaryTubeDiameter * .6
        ],
-       radius = 0.25 / 2
+       radius = 0.25 / 2,
      ), %)
 
   // Extrude the flange and fillet the edges
@@ -141,12 +123,12 @@ flangeSketch = startSketchOn('XY')
        tags = [
          getNextAdjacentEdge(seg04),
          getNextAdjacentEdge(seg07)
-       ]
+       ],
      )
   |> fillet(
        radius = .25,
        tags = [
          getNextAdjacentEdge(seg03),
          getNextAdjacentEdge(seg08)
-       ]
+       ],
      )

public/kcl-samples/flange/main.kcl

@@ -21,44 +21,32 @@ nHoles = 4
 assertGreaterThan(nHoles, 1, "nHoles must be greater than 1")
 
 // Create the circular pattern for the mounting holes
-circles = startSketchOn('XY')
+circles = startSketchOn(XY)
-  |> circle(
+  |> circle(center = [mountingHolePlacementDiameter / 2, 0], radius = mountingHoleDia / 2)
-       center = [mountingHolePlacementDiameter / 2, 0],
-       radius = mountingHoleDia / 2
-     )
   |> patternCircular2d(
        arcDegrees = 360,
        center = [0, 0],
        instances = nHoles,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 
 // Create the base of the flange and add the mounting holes
-flangeBase = startSketchOn('XY')
+flangeBase = startSketchOn(XY)
-  |> circle(
+  |> circle(center = [0, 0], radius = baseDia / 2)
-       center = [0, 0],
-       radius = baseDia / 2
-     )
   |> hole(circles, %)
   |> extrude(length = baseThickness)
 
 // Create the extrusion on the top of the flange base
 topExtrusion = startSketchOn(flangeBase, 'end')
-  |> circle(
+  |> circle(center = [0, 0], radius = topTotalDiameter / 2)
-       center = [0, 0],
-       radius = topTotalDiameter / 2
-     )
   |> extrude(length = topTotalThickness)
 
 // Create the extrusion on the bottom of the flange base
 bottomExtrusion = startSketchOn(flangeBase, 'start')
-  |> circle(
+  |> circle(center = [0, 0], radius = bottomTotalDiameter / 2)
-       center = [0, 0],
-       radius = bottomTotalDiameter / 2
-     )
   |> extrude(length = bottomThickness)
 
 // Cut a hole through the entire body
 pipeHole = startSketchOn(topExtrusion, 'end')
-  |> circle(center = [0, 0], radius = pipeDia/2)
+  |> circle(center = [0, 0], radius = pipeDia / 2)
   |> extrude(%, length = -(topTotalThickness + baseThickness + bottomThickness))

public/kcl-samples/focusrite-scarlett-mounting-bracket/main.kcl

@@ -62,7 +62,7 @@ bracketBody = bs
          getPreviousAdjacentEdge(bs.tags.edge2),
          getPreviousAdjacentEdge(bs.tags.edge3),
          getPreviousAdjacentEdge(bs.tags.edge6)
-       ]
+       ],
      )
 
 // define the tab plane
@@ -87,7 +87,7 @@ tabsR = startSketchOn(tabPlane)
          width / 2 + thk + tabWidth / 2,
          length / 2 + thk - (tabLength / (3 / 2))
        ],
-       radius = holeDiam / 2
+       radius = holeDiam / 2,
      ), %)
   |> extrude(length = -tabThk)
   |> fillet(
@@ -95,13 +95,9 @@ tabsR = startSketchOn(tabPlane)
        tags = [
          getNextAdjacentEdge(edge11),
          getNextAdjacentEdge(edge12)
-       ]
+       ],
-     )
-  |> patternLinear3d(
-       axis = [0, -1, 0],
-       instances = 2,
-       distance = length + 2 * thk - (tabLength * 4 / 3)
      )
+  |> patternLinear3d(axis = [0, -1, 0], instances = 2, distance = length + 2 * thk - (tabLength * 4 / 3))
 
 // build the tabs of the mounting bracket (left side)
 tabsL = startSketchOn(tabPlane)
@@ -115,7 +111,7 @@ tabsL = startSketchOn(tabPlane)
          -width / 2 - thk - (tabWidth / 2),
          length / 2 + thk - (tabLength / (3 / 2))
        ],
-       radius = holeDiam / 2
+       radius = holeDiam / 2,
      ), %)
   |> extrude(length = -tabThk)
   |> fillet(
@@ -123,13 +119,9 @@ tabsL = startSketchOn(tabPlane)
        tags = [
          getNextAdjacentEdge(edge21),
          getNextAdjacentEdge(edge22)
-       ]
+       ],
-     )
-  |> patternLinear3d(
-       axis = [0, -1, 0],
-       instances = 2,
-       distance = length + 2 * thk - (tabLength * 4 / 3)
      )
+  |> patternLinear3d(axis = [0, -1, 0], instances = 2, distance = length + 2 * thk - (tabLength * 4 / 3))
 
 // define a plane for retention bumps
 retPlane = {

public/kcl-samples/food-service-spatula/main.kcl

@@ -44,7 +44,7 @@ fn slot(sketch1, start, end, width) {
 }
 
 // create a sketch on the "XY" plane
-sketch000 = startSketchOn('XY')
+sketch000 = startSketchOn(XY)
 
 // create a profile of the flipper
 flipperProfile = startProfileAt([-flipperLength, -32.0], sketch000)
@@ -83,11 +83,11 @@ fillet(
   tags = [
     getNextAdjacentEdge(backEdge),
     getPreviousAdjacentEdge(backEdge)
-  ]
+  ],
 )
 
 // create a sketch on the "XZ" plane offset by half the thickness
-sketch001 = startSketchOn(offsetPlane("XZ", offset = -handleWidth / 2))
+sketch001 = startSketchOn(offsetPlane(XZ, offset = -handleWidth / 2))
 
 // create a profile of the spatula handle
 handleProfile = startProfileAt([0.0, flipperThickness], sketch001)
@@ -109,7 +109,7 @@ fillet(
   tags = [
     getNextAdjacentEdge(handleBottomEdge),
     getNextAdjacentEdge(handleTopEdge)
-  ]
+  ],
 )
 
 // define a plane which is at the end of the handle
@@ -163,4 +163,4 @@ sketch003 = startSketchOn(grip, gripEdgeTop)
 gripHoleProfile = slot(sketch003, [0, 200], [0, 210], gripSlotWidth)
 
 // cut a hole in the grip
-extrude(gripHoleProfile, length = -gripWidth-20)
+extrude(gripHoleProfile, length = -gripWidth - 20)

public/kcl-samples/french-press/main.kcl

@@ -10,7 +10,7 @@ carafeHeight = 7.32
 handleThickness = 0.65
 
 // Upper ring of the metal structure
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([carafeDiameter / 2, 5.7], %)
   |> angledLine([0, 0.1], %, $rectangleSegmentA001)
   |> angledLine([
@@ -91,15 +91,12 @@ sketch002 = startSketchOn(plane001)
        center = [0, 0, 0],
        instances = 4,
        arcDegrees = 360,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 
 // Cross plate
-sketch003 = startSketchOn(offsetPlane('XY', offset = 1))
+sketch003 = startSketchOn(offsetPlane(XY, offset = 1))
-  |> circle(
+  |> circle(center = [0, 0], radius = carafeDiameter / 2 - 0.15)
-       center = [0, 0],
-       radius = carafeDiameter / 2 - 0.15
-     )
 
 extrude001 = extrude(sketch003, length = 0.050)
 
@@ -117,13 +114,13 @@ sketch004 = startSketchOn(extrude001, 'END')
        center = [0, 0],
        instances = 3,
        arcDegrees = 360,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 
 extrude002 = extrude(sketch004, length = -0.050)
 
 // Filter screen
-sketch005 = startSketchOn('XZ')
+sketch005 = startSketchOn(XZ)
   |> startProfileAt([0.15, 1.11], %)
   |> xLine(endAbsolute = carafeDiameter / 2 - 0.2)
   |> angledLineToX({
@@ -138,7 +135,7 @@ sketch005 = startSketchOn('XZ')
   |> revolve(axis = 'y')
 
 // Plunger and stem
-sketch006 = startSketchOn('XZ')
+sketch006 = startSketchOn(XZ)
   |> startProfileAt([0.1, 1], %)
   |> line(end = [0.1, 0])
   |> angledLineToX({ angle = 10, to = 0.05 }, %)
@@ -151,11 +148,8 @@ sketch006 = startSketchOn('XZ')
   |> revolve(axis = 'y')
 
 // Spiral plate
-sketch007 = startSketchOn(offsetPlane('XY', offset = 1.12))
+sketch007 = startSketchOn(offsetPlane(XY, offset = 1.12))
-  |> circle(
+  |> circle(center = [0, 0], radius = carafeDiameter / 2 - 0.24)
-       center = [0, 0],
-       radius = carafeDiameter / 2 - 0.24
-     )
   |> hole(circle(center = [0, 0], radius = .15), %)
 
 extrude003 = extrude(sketch007, length = 0.050)
@@ -167,7 +161,7 @@ sketch008 = startSketchOn(extrude003, 'END')
        center = [0, 0],
        instances = 8,
        arcDegrees = 360,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 
 extrude004 = extrude(sketch008, length = -0.050)
@@ -179,24 +173,21 @@ sketch009 = startSketchOn(extrude003, 'END')
        center = [0, 0],
        instances = 4,
        arcDegrees = 360,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 
 extrude005 = extrude(sketch009, length = -0.050)
 
 // Extrude a glass carafe body
-sketch010 = startSketchOn("XY")
+sketch010 = startSketchOn(XY)
-  |> circle(
+  |> circle(center = [0, 0], radius = carafeDiameter / 2)
-       center = [0, 0],
-       radius = carafeDiameter / 2
-     )
 
 // Perform a shell operation to hollow the carafe body with the top face removed
 extrude006 = extrude(sketch010, length = carafeHeight)
   |> shell(faces = ["end"], thickness = .07)
 
 // Draw and revolve the lid
-sketch011 = startSketchOn('XZ')
+sketch011 = startSketchOn(XZ)
   |> startProfileAt([0.2, carafeHeight - 0.7], %)
   |> xLine(length = carafeDiameter / 2 - 0.3)
   |> yLine(length = 0.7)
@@ -213,7 +204,7 @@ sketch011 = startSketchOn('XZ')
   |> revolve(axis = 'y')
 
 // Draw and extrude handle
-sketch012 = startSketchOn(offsetPlane('XZ', offset = handleThickness / 2))
+sketch012 = startSketchOn(offsetPlane(XZ, offset = handleThickness / 2))
   |> startProfileAt([2.3, 6.4], %)
   |> line(end = [0.56, 0])
   |> tangentialArcTo([4.1, 5.26], %)

public/kcl-samples/gear-rack/main.kcl

@@ -12,7 +12,7 @@ height = 12
 minHeight = 10.875
 
 // Create the body of the rack
-rackBody = startSketchOn('XY')
+rackBody = startSketchOn(XY)
   |> startProfileAt([-length / 2, 0], %)
   |> line(end = [length, 0])
   |> line(end = [0, minHeight])
@@ -22,7 +22,7 @@ rackBody = startSketchOn('XY')
 
 // Create a function for sketch of a single tooth
 fn tooth() {
-  toothSketch = startSketchOn('XY')
+  toothSketch = startSketchOn(XY)
     |> startProfileAt([-length / 2 + 0.567672, minHeight], %)
     |> tangentialArcToRelative([0.157636, 0.110378], %)
     |> line(end = [0.329118, 0.904244])
@@ -38,14 +38,10 @@ fn tooth() {
 
 // Pattern the single tooth over the length of the rack body
 teeth = tooth()
-  |> patternLinear3d(
+  |> patternLinear3d(axis = [10, 0, 0], distance = 1.570796, instances = 63)
-       axis = [10, 0, 0],
-       distance = 1.570796,
-       instances = 63
-     )
 
 // Sketch and extrude the first end cap. This is a partial tooth
-endCapTooth = startSketchOn('XY')
+endCapTooth = startSketchOn(XY)
   |> startProfileAt([-length / 2, 11.849525], %)
   |> line(end = [0.314524, -0.864147])
   |> tangentialArcToRelative([0.157636, -0.110378], %)
@@ -54,7 +50,7 @@ endCapTooth = startSketchOn('XY')
   |> extrude(length = width)
 
 // Sketch and extrude the second end cap. This is a partial tooth
-endCapTooth2 = startSketchOn('XY')
+endCapTooth2 = startSketchOn(XY)
   |> startProfileAt([length / 2, 11.849525], %)
   |> line(end = [-0.314524, -0.864147])
   |> tangentialArcToRelative([-0.157636, -0.110378], %)

public/kcl-samples/gear/main.kcl

@@ -17,35 +17,32 @@ gearHeight = 3
 
 // Interpolate points along the involute curve
 cmo = 101
-rs = map([0..cmo], fn (i) {
+rs = map([0..cmo], fn(i) {
   return baseDiameter / 2 + i / cmo * (tipDiameter - baseDiameter) / 2
 })
 
 // Calculate operating pressure angle
-angles = map(rs, fn (r) {
+angles = map(rs, fn(r) {
   return toDegrees(  acos(baseDiameter / 2 / r))
 })
 
 // Calculate the involute function
-invas = map(angles, fn (a) {
+invas = map(angles, fn(a) {
   return tan(toRadians(a)) - toRadians(a)
 })
 
 // Map the involute curve
-xs = map([0..cmo], fn (i) {
+xs = map([0..cmo], fn(i) {
   return rs[i] * cos(invas[i])
 })
 
-ys = map([0..cmo], fn (i) {
+ys = map([0..cmo], fn(i) {
   return rs[i] * sin(invas[i])
 })
 
 // Extrude the gear body
-body = startSketchOn('XY')
+body = startSketchOn(XY)
-  |> circle(
+  |> circle(center = [0, 0], radius = baseDiameter / 2)
-       center = [0, 0],
-       radius = baseDiameter / 2
-     )
   |> extrude(length = gearHeight)
 
 toothAngle = 360 / nTeeth / 1.5
@@ -63,7 +60,7 @@ fn rightInvolute(i, sg) {
 }
 
 // Draw gear teeth
-start = startSketchOn('XY')
+start = startSketchOn(XY)
   |> startProfileAt([xs[101], ys[101]], %)
 teeth = reduce([0..100], start, leftInvolute)
   |> arc({
@@ -79,7 +76,7 @@ teeth = reduce([0..100], start, leftInvolute)
        center = [0, 0, 0],
        instances = nTeeth,
        arcDegrees = 360,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 
 // Define the constants of the keyway and the bore hole

public/kcl-samples/gridfinity-baseplate-magnets/main.kcl

@@ -34,7 +34,7 @@ fn face(plane) {
 }
 
 // extrude a single side of the bin
-singleSide = extrude(face(offsetPlane("YZ", offset = cornerRadius)), length = binLength - (cornerRadius * 2), )
+singleSide = extrude(face(offsetPlane(YZ, offset = cornerRadius)), length = binLength - (cornerRadius * 2))
 
 // create the other sides of the bin by using a circular pattern
 sides = patternCircular3d(
@@ -43,7 +43,7 @@ sides = patternCircular3d(
   axis = [0, 0, 1],
   center = [binLength / 2, binLength / 2, 0],
   instances = 4,
-  rotateDuplicates = true
+  rotateDuplicates = true,
 )
 
 // define an axis axis000
@@ -55,7 +55,7 @@ axis000 = {
 }
 
 // create a single corner of the bin
-singleCorner = revolve(face(offsetPlane("YZ", offset = cornerRadius)), angle = -90, axis = axis000)
+singleCorner = revolve(face(offsetPlane(YZ, offset = cornerRadius)), angle = -90, axis = axis000)
 
 // create the corners of the bin
 corners = patternCircular3d(
@@ -64,7 +64,7 @@ corners = patternCircular3d(
   axis = [0, 0, 1],
   center = [binLength / 2, binLength / 2, 0],
   instances = 4,
-  rotateDuplicates = true
+  rotateDuplicates = true,
 )
 
 // create the baseplate by patterning sides
@@ -72,26 +72,18 @@ basePlateSides = patternLinear3d(
        sides,
        axis = [1.0, 0.0, 0.0],
        instances = countBinWidth,
-       distance = binLength
+       distance = binLength,
-     )
-  |> patternLinear3d(
-       axis = [0.0, 1.0, 0.0],
-       instances = countBinLength,
-       distance = binLength
      )
+  |> patternLinear3d(axis = [0.0, 1.0, 0.0], instances = countBinLength, distance = binLength)
 
 // create the corners of the baseplate by patterning the corners
 basePlateCorners = patternLinear3d(
        corners,
        axis = [1.0, 0.0, 0.0],
        instances = countBinWidth,
-       distance = binLength
+       distance = binLength,
-     )
-  |> patternLinear3d(
-       axis = [0.0, 1.0, 0.0],
-       instances = countBinLength,
-       distance = binLength
      )
+  |> patternLinear3d(axis = [0.0, 1.0, 0.0], instances = countBinLength, distance = binLength)
 
 // create the center cutout for the magnet profile
 fn magnetCenterCutout(plane) {
@@ -149,20 +141,17 @@ fn magnetBase(plane) {
 }
 
 // create sketch profile sketch000Profile002
-magnetsSketch = startSketchOn('XY')
+magnetsSketch = startSketchOn(XY)
-  |> circle(
+  |> circle(center = [cornerRadius * 2, cornerRadius * 2], radius = magOuterDiam / 2)
-       center = [cornerRadius * 2, cornerRadius * 2],
-       radius = magOuterDiam / 2
-     )
   |> patternCircular2d(
        center = [binLength / 2, binLength / 2],
        instances = 4,
        arcDegrees = 360,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 
 // create a profile with holes for the magnets
-magnetProfile = magnetBase("XY")
+magnetProfile = magnetBase(XY)
   |> hole(magnetsSketch, %)
 
 // create an extrusion of the magnet cutout with holes
@@ -177,11 +166,11 @@ magnetHolesExtrudeFillets = fillet(
     getPreviousAdjacentEdge(magnetHolesExtrude.sketch.tags.line001),
     getNextAdjacentEdge(magnetHolesExtrude.sketch.tags.line003),
     getPreviousAdjacentEdge(magnetHolesExtrude.sketch.tags.line003)
-  ]
+  ],
 )
 
 // create a profile without the holes for the magnets
-magnetProfileNoMagnets = magnetBase(offsetPlane("XY", offset = -magDepth))
+magnetProfileNoMagnets = magnetBase(offsetPlane(XY, offset = -magDepth))
 
 // create an extrusion of the magnet cutout without holes
 magnetCutoutExtrude = extrude(magnetProfileNoMagnets, length = -magDepth)
@@ -195,7 +184,7 @@ magnetCutoutExtrudeFillets = fillet(
     getPreviousAdjacentEdge(magnetCutoutExtrude.sketch.tags.line001),
     getNextAdjacentEdge(magnetCutoutExtrude.sketch.tags.line003),
     getPreviousAdjacentEdge(magnetCutoutExtrude.sketch.tags.line003)
-  ]
+  ],
 )
 
 // pattern the magnet cutouts with holes
@@ -203,23 +192,15 @@ patternLinear3d(
        magnetHolesExtrudeFillets,
        axis = [1.0, 0.0, 0.0],
        instances = countBinWidth,
-       distance = binLength
+       distance = binLength,
-     )
-  |> patternLinear3d(
-       axis = [0.0, 1.0, 0.0],
-       instances = countBinLength,
-       distance = binLength
      )
+  |> patternLinear3d(axis = [0.0, 1.0, 0.0], instances = countBinLength, distance = binLength)
 
 // pattern the magnet cutouts without holes
 patternLinear3d(
        magnetCutoutExtrudeFillets,
        axis = [1.0, 0.0, 0.0],
        instances = countBinWidth,
-       distance = binLength
+       distance = binLength,
-     )
-  |> patternLinear3d(
-       axis = [0.0, 1.0, 0.0],
-       instances = countBinLength,
-       distance = binLength
      )
+  |> patternLinear3d(axis = [0.0, 1.0, 0.0], instances = countBinLength, distance = binLength)

public/kcl-samples/gridfinity-baseplate/main.kcl

@@ -31,7 +31,7 @@ fn face(plane) {
 }
 
 // extrude a single side of the bin
-singleSide = extrude(face(offsetPlane("YZ", offset = cornerRadius)), length = binLength - (cornerRadius * 2))
+singleSide = extrude(face(offsetPlane(YZ, offset = cornerRadius)), length = binLength - (cornerRadius * 2))
 
 // create the other sides of the bin by using a circular pattern
 sides = patternCircular3d(
@@ -40,7 +40,7 @@ sides = patternCircular3d(
   axis = [0, 0, 1],
   center = [binLength / 2, binLength / 2, 0],
   instances = 4,
-  rotateDuplicates = true
+  rotateDuplicates = true,
 )
 
 // define an axis axis000
@@ -52,7 +52,7 @@ axis000 = {
 }
 
 // create a single corner of the bin
-singleCorner = revolve(face(offsetPlane("YZ", offset = cornerRadius)), angle = -90, axis = axis000)
+singleCorner = revolve(face(offsetPlane(YZ, offset = cornerRadius)), angle = -90, axis = axis000)
 
 // create the corners of the bin
 corners = patternCircular3d(
@@ -61,7 +61,7 @@ corners = patternCircular3d(
   axis = [0, 0, 1],
   center = [binLength / 2, binLength / 2, 0],
   instances = 4,
-  rotateDuplicates = true
+  rotateDuplicates = true,
 )
 
 // create the baseplate by patterning sides
@@ -69,23 +69,15 @@ basePlateSides = patternLinear3d(
        sides,
        axis = [1.0, 0.0, 0.0],
        instances = countBinWidth,
-       distance = binLength
+       distance = binLength,
-     )
-  |> patternLinear3d(
-       axis = [0.0, 1.0, 0.0],
-       instances = countBinLength,
-       distance = binLength
      )
+  |> patternLinear3d(axis = [0.0, 1.0, 0.0], instances = countBinLength, distance = binLength)
 
 // create the corners of the baseplate by patterning the corners
 basePlateCorners = patternLinear3d(
        corners,
        axis = [1.0, 0.0, 0.0],
        instances = countBinWidth,
-       distance = binLength
+       distance = binLength,
-     )
-  |> patternLinear3d(
-       axis = [0.0, 1.0, 0.0],
-       instances = countBinLength,
-       distance = binLength
      )
+  |> patternLinear3d(axis = [0.0, 1.0, 0.0], instances = countBinLength, distance = binLength)

public/kcl-samples/gridfinity-bins-stacking-lip/main.kcl

@@ -47,7 +47,7 @@ fn face(plane) {
 }
 
 // extrude a single side of the bin
-singleSide = extrude(face(offsetPlane("YZ", offset = cornerRadius + binTol)), length = binLength - (cornerRadius * 2))
+singleSide = extrude(face(offsetPlane(YZ, offset = cornerRadius + binTol)), length = binLength - (cornerRadius * 2))
 
 // create the other sides of the bin by using a circular pattern
 sides = patternCircular3d(
@@ -60,7 +60,7 @@ sides = patternCircular3d(
     0
   ],
   instances = 4,
-  rotateDuplicates = true
+  rotateDuplicates = true,
 )
 
 // define an axis axis000
@@ -75,7 +75,7 @@ axis000 = {
 }
 
 // create a single corner of the bin
-singleCorner = revolve(face(offsetPlane("YZ", offset = cornerRadius + binTol)), angle = -90, axis = axis000)
+singleCorner = revolve(face(offsetPlane(YZ, offset = cornerRadius + binTol)), angle = -90, axis = axis000)
 
 // create the corners of the bin
 corners = patternCircular3d(
@@ -88,10 +88,10 @@ corners = patternCircular3d(
     0
   ],
   instances = 4,
-  rotateDuplicates = true
+  rotateDuplicates = true,
 )
 
-singleBinFill = startSketchOn("XY")
+singleBinFill = startSketchOn(XY)
   |> startProfileAt([
        binBaseLength + binTol,
        binBaseLength + binTol
@@ -108,7 +108,7 @@ singleBinFill = startSketchOn("XY")
          getPreviousAdjacentEdge(line000),
          getNextAdjacentEdge(line002),
          getPreviousAdjacentEdge(line002)
-       ]
+       ],
      )
 
 magCutout000 = startSketchOn(singleBinFill, "start")
@@ -117,7 +117,7 @@ magCutout000 = startSketchOn(singleBinFill, "start")
          -magOffset - binBaseLength - binTol,
          magOffset + binBaseLength + binTol
        ],
-       radius = magOuterDiam / 2
+       radius = magOuterDiam / 2,
      )
   |> patternCircular2d(
        arcDegrees = 360,
@@ -126,7 +126,7 @@ magCutout000 = startSketchOn(singleBinFill, "start")
          (binLength + 2 * binTol) / 2
        ],
        instances = 4,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
   |> extrude(length = -magDepth)
 
@@ -135,42 +135,30 @@ binSides = patternLinear3d(
        sides,
        axis = [1.0, 0.0, 0.0],
        instances = countBinWidth,
-       distance = binLength + binTol * 2
+       distance = binLength + binTol * 2,
-     )
-  |> patternLinear3d(
-       axis = [0.0, 1.0, 0.0],
-       instances = countBinLength,
-       distance = binLength + binTol * 2
      )
+  |> patternLinear3d(axis = [0.0, 1.0, 0.0], instances = countBinLength, distance = binLength + binTol * 2)
 
 // create the corners of the baseplate by patterning the corners
 binCorners = patternLinear3d(
        corners,
        axis = [1.0, 0.0, 0.0],
        instances = countBinWidth,
-       distance = binLength + binTol * 2
+       distance = binLength + binTol * 2,
-     )
-  |> patternLinear3d(
-       axis = [0.0, 1.0, 0.0],
-       instances = countBinLength,
-       distance = binLength + binTol * 2
      )
+  |> patternLinear3d(axis = [0.0, 1.0, 0.0], instances = countBinLength, distance = binLength + binTol * 2)
 
 // create the fill of the bin by patterning the corners
 binFill = patternLinear3d(
        singleBinFill,
        axis = [1.0, 0.0, 0.0],
        instances = countBinWidth,
-       distance = binLength + binTol * 2
+       distance = binLength + binTol * 2,
-     )
-  |> patternLinear3d(
-       axis = [0.0, 1.0, 0.0],
-       instances = countBinLength,
-       distance = binLength + binTol * 2
      )
+  |> patternLinear3d(axis = [0.0, 1.0, 0.0], instances = countBinLength, distance = binLength + binTol * 2)
 
 //
-binTop = startSketchOn(offsetPlane("XY", offset = height))
+binTop = startSketchOn(offsetPlane(XY, offset = height))
   |> startProfileAt([0, 0], %)
   |> xLine(length = (binLength + 2 * binTol) * countBinWidth, tag = $line010)
   |> yLine(length = (binLength + 2 * binTol) * countBinLength, tag = $line011)
@@ -184,7 +172,7 @@ binTop = startSketchOn(offsetPlane("XY", offset = height))
          getPreviousAdjacentEdge(line010),
          getNextAdjacentEdge(line012),
          getPreviousAdjacentEdge(line012)
-       ]
+       ],
      )
   |> shell(faces = ["end"], thickness = binThk)
 
@@ -265,7 +253,7 @@ lipLengths = patternCircular3d(
     0
   ],
   instances = 2,
-  rotateDuplicates = true
+  rotateDuplicates = true,
 )
 
 // create the other sides of the lips by using a circular pattern
@@ -279,7 +267,7 @@ lipWidths = patternCircular3d(
     0
   ],
   instances = 2,
-  rotateDuplicates = true
+  rotateDuplicates = true,
 )
 
 // define an axis axis000
@@ -307,7 +295,7 @@ lipCorners000 = patternCircular3d(
     0
   ],
   instances = 2,
-  rotateDuplicates = true
+  rotateDuplicates = true,
 )
 
 // create the corners of the bin
@@ -321,5 +309,5 @@ lipCorners001 = patternCircular3d(
     0
   ],
   instances = 2,
-  rotateDuplicates = true
+  rotateDuplicates = true,
 )

public/kcl-samples/gridfinity-bins/main.kcl

@@ -40,7 +40,7 @@ fn face(plane) {
 }
 
 // extrude a single side of the bin
-singleSide = extrude(face(offsetPlane("YZ", offset = cornerRadius + binTol)), length = binLength - (cornerRadius * 2), )
+singleSide = extrude(face(offsetPlane(YZ, offset = cornerRadius + binTol)), length = binLength - (cornerRadius * 2))
 
 // create the other sides of the bin by using a circular pattern
 sides = patternCircular3d(
@@ -53,7 +53,7 @@ sides = patternCircular3d(
     0
   ],
   instances = 4,
-  rotateDuplicates = true
+  rotateDuplicates = true,
 )
 
 // define an axis axis000
@@ -68,7 +68,7 @@ axis000 = {
 }
 
 // create a single corner of the bin
-singleCorner = revolve(face(offsetPlane("YZ", offset = cornerRadius + binTol)), angle = -90, axis = axis000)
+singleCorner = revolve(face(offsetPlane(YZ, offset = cornerRadius + binTol)), angle = -90, axis = axis000)
 
 // create the corners of the bin
 corners = patternCircular3d(
@@ -81,10 +81,10 @@ corners = patternCircular3d(
     0
   ],
   instances = 4,
-  rotateDuplicates = true
+  rotateDuplicates = true,
 )
 
-singleBinFill = startSketchOn("XY")
+singleBinFill = startSketchOn(XY)
   |> startProfileAt([
        binBaseLength + binTol,
        binBaseLength + binTol
@@ -101,7 +101,7 @@ singleBinFill = startSketchOn("XY")
          getPreviousAdjacentEdge(line000),
          getNextAdjacentEdge(line002),
          getPreviousAdjacentEdge(line002)
-       ]
+       ],
      )
 
 magCutout000 = startSketchOn(singleBinFill, "start")
@@ -110,7 +110,7 @@ magCutout000 = startSketchOn(singleBinFill, "start")
          -magOffset - binBaseLength - binTol,
          magOffset + binBaseLength + binTol
        ],
-       radius = magOuterDiam / 2
+       radius = magOuterDiam / 2,
      )
   |> patternCircular2d(
        arcDegrees = 360,
@@ -119,7 +119,7 @@ magCutout000 = startSketchOn(singleBinFill, "start")
          (binLength + 2 * binTol) / 2
        ],
        instances = 4,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
   |> extrude(length = -magDepth)
 
@@ -128,42 +128,30 @@ binSides = patternLinear3d(
        sides,
        axis = [1.0, 0.0, 0.0],
        instances = countBinWidth,
-       distance = binLength + binTol * 2
+       distance = binLength + binTol * 2,
-     )
-  |> patternLinear3d(
-       axis = [0.0, 1.0, 0.0],
-       instances = countBinLength,
-       distance = binLength + binTol * 2
      )
+  |> patternLinear3d(axis = [0.0, 1.0, 0.0], instances = countBinLength, distance = binLength + binTol * 2)
 
 // create the corners of the baseplate by patterning the corners
 binCorners = patternLinear3d(
        corners,
        axis = [1.0, 0.0, 0.0],
        instances = countBinWidth,
-       distance = binLength + binTol * 2
+       distance = binLength + binTol * 2,
-     )
-  |> patternLinear3d(
-       axis = [0.0, 1.0, 0.0],
-       instances = countBinLength,
-       distance = binLength + binTol * 2
      )
+  |> patternLinear3d(axis = [0.0, 1.0, 0.0], instances = countBinLength, distance = binLength + binTol * 2)
 
 // create the fill of the bin by patterning the corners
 binFill = patternLinear3d(
        singleBinFill,
        axis = [1.0, 0.0, 0.0],
        instances = countBinWidth,
-       distance = binLength + binTol * 2
+       distance = binLength + binTol * 2,
-     )
-  |> patternLinear3d(
-       axis = [0.0, 1.0, 0.0],
-       instances = countBinLength,
-       distance = binLength + binTol * 2
      )
+  |> patternLinear3d(axis = [0.0, 1.0, 0.0], instances = countBinLength, distance = binLength + binTol * 2)
 
 // create the top of the bin
-binTop = startSketchOn(offsetPlane("XY", offset = height))
+binTop = startSketchOn(offsetPlane(XY, offset = height))
   |> startProfileAt([0, 0], %)
   |> xLine(length = (binLength + 2 * binTol) * countBinWidth, tag = $line010)
   |> yLine(length = (binLength + 2 * binTol) * countBinLength, tag = $line011)
@@ -177,6 +165,6 @@ binTop = startSketchOn(offsetPlane("XY", offset = height))
          getPreviousAdjacentEdge(line010),
          getNextAdjacentEdge(line012),
          getPreviousAdjacentEdge(line012)
-       ]
+       ],
      )
   |> shell(faces = ["end"], thickness = binThk)

public/kcl-samples/hex-nut/main.kcl

@@ -11,7 +11,7 @@ diameter = 0.3125
 
 // Define a function for the hex nut
 fn hexNut(start, thk, innerDia) {
-  hexNutSketch = startSketchOn('-XZ')
+  hexNutSketch = startSketchOn(-XZ)
     |> startProfileAt([start[0] + innerDia, start[1]], %)
     |> angledLine({ angle = 240, length = innerDia }, %)
     |> angledLine({ angle = 180, length = innerDia }, %)
@@ -19,10 +19,7 @@ fn hexNut(start, thk, innerDia) {
     |> angledLine({ angle = 60, length = innerDia }, %)
     |> angledLine({ angle = 0, length = innerDia * .90 }, %)
     |> close()
-    |> hole(circle(
+    |> hole(circle(center = [start[0], start[1]], radius = innerDia / 2), %)
-         center = [start[0], start[1]],
-         radius = innerDia / 2
-       ), %)
     |> extrude(length = thk)
   return hexNutSketch
 }

public/kcl-samples/keyboard/main.kcl

@@ -19,7 +19,7 @@ row5 = row4 + keyHeight + spacing
 row6 = row5 + keyHeight + spacing
 
 // Sketch the side profile of the keyboard base and extrude to total width
-sketch001 = startSketchOn('YZ')
+sketch001 = startSketchOn(YZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [-0.14, 0.68], tag = $seg01)
   |> angledLine([7, row6 + 3 * spacing + keyHeight], %, $seg02)
@@ -89,7 +89,7 @@ fn keyFn(originStart, keyWidth, keyHeight, repeats, color) {
     |> close()
     |> extrude(length = keyDepth)
     |> appearance(color = color)
-// Repeat key when desired. This will default to zero
+    // Repeat key when desired. This will default to zero
     |> patternLinear3d(
          %,
          instances = repeats + 1,

public/kcl-samples/kitt/main.kcl

@@ -20,7 +20,7 @@ kitBodyWidth = 26
 kitBodyHeight = 25
 kitBodyDepth = 18
 
-kitBody = startSketchOn('XZ')
+kitBody = startSketchOn(XZ)
   |> startProfileAt([-kitBodyWidth / 2, kitBodyElevation], %)
   |> line(end = [0, kitBodyHeight])
   |> line(end = [kitBodyWidth, 0], tag = $seg01)
@@ -159,7 +159,7 @@ kitShoeHeight = 3
 fn kitLeg(offsetFront, offsetSide) {
   kitShoeOffsetFront = kitShoeLength / 2 - (kitBodyDepth / 2) - offsetFront
 
-  kitFootPrint = startSketchOn('XY')
+  kitFootPrint = startSketchOn(XY)
     |> startProfileAt([offsetSide, kitShoeOffsetFront], %)
     |> line(end = [kitShoeWidth, 0])
     |> line(end = [0, -kitShoeLength])

public/kcl-samples/lego/main.kcl

@@ -26,7 +26,7 @@ assertGreaterThan(lbumps, 1, "lbumps must be greater than 1")
 assertGreaterThan(wbumps, 1, "wbumps must be greater than 1")
 
 // Make the base
-base = startSketchOn('XY')
+base = startSketchOn(XY)
   |> startProfileAt([-totalWidth / 2, -totalLength / 2], %)
   |> line(end = [totalWidth, 0])
   |> line(end = [0, totalLength])
@@ -53,18 +53,10 @@ peg = startSketchOn(base, 'end')
          -(pitch * (wbumps - 1) / 2),
          -(pitch * (lbumps - 1) / 2)
        ],
-       radius = bumpDiam / 2
+       radius = bumpDiam / 2,
-     )
-  |> patternLinear2d(
-       axis = [1, 0],
-       instances = wbumps,
-       distance = pitch
-     )
-  |> patternLinear2d(
-       axis = [0, 1],
-       instances = lbumps,
-       distance = pitch
      )
+  |> patternLinear2d(axis = [1, 0], instances = wbumps, distance = pitch)
+  |> patternLinear2d(axis = [0, 1], instances = lbumps, distance = pitch)
   |> extrude(length = bumpHeight)
 
 // Create the pegs on the bottom of the base
@@ -74,16 +66,8 @@ tubePattern = startSketchOn(shellExtrude, 'start')
          -(pitch * (wbumps - 1) / 2 - (pitch / 2)),
          -(pitch * (lbumps - 1) / 2 - (pitch / 2))
        ],
-       radius = bumpDiam / 2
+       radius = bumpDiam / 2,
-     )
-  |> patternLinear2d(
-       axis = [1, 0],
-       instances = wbumps - 1,
-       distance = pitch
-     )
-  |> patternLinear2d(
-       axis = [0, 1],
-       instances = lbumps - 1,
-       distance = pitch
      )
+  |> patternLinear2d(axis = [1, 0], instances = wbumps - 1, distance = pitch)
+  |> patternLinear2d(axis = [0, 1], instances = lbumps - 1, distance = pitch)
   |> extrude(length = bumpHeight)

public/kcl-samples/mounting-plate/main.kcl

@@ -13,7 +13,7 @@ centerHoleDiameter = 2
 
 // Create a function that defines the body width and length of the mounting plate. Tag the corners so they can be passed through the fillet function.
 fn rectShape(pos, w, l) {
-  rr = startSketchOn('XY')
+  rr = startSketchOn(XY)
     |> startProfileAt([pos[0] - (w / 2), pos[1] - (l / 2)], %)
     |> line(endAbsolute = [pos[0] + w / 2, pos[1] - (l / 2)], tag = $edge1)
     |> line(endAbsolute = [pos[0] + w / 2, pos[1] + l / 2], tag = $edge2)
@@ -34,33 +34,30 @@ part = rs
          -plateWidth / 2 + holeIndex,
          plateLength / 2 - holeIndex
        ],
-       radius = holeRadius
+       radius = holeRadius,
      ), %)
   |> hole(circle(
        center = [
          plateWidth / 2 - holeIndex,
          plateLength / 2 - holeIndex
        ],
-       radius = holeRadius
+       radius = holeRadius,
      ), %)
   |> hole(circle(
        center = [
          -plateWidth / 2 + holeIndex,
          -plateLength / 2 + holeIndex
        ],
-       radius = holeRadius
+       radius = holeRadius,
      ), %)
   |> hole(circle(
        center = [
          plateWidth / 2 - holeIndex,
          -plateLength / 2 + holeIndex
        ],
-       radius = holeRadius
+       radius = holeRadius,
-     ), %)
-  |> hole(circle(
-       center = [0, 0],
-       radius = centerHoleDiameter
      ), %)
+  |> hole(circle(center = [0, 0], radius = centerHoleDiameter), %)
   |> extrude(length = plateThickness)
   |> fillet(
        radius = filletRadius,
@@ -69,5 +66,5 @@ part = rs
          getPreviousAdjacentEdge(rs.tags.edge2),
          getPreviousAdjacentEdge(rs.tags.edge3),
          getPreviousAdjacentEdge(rs.tags.edge4)
-       ]
+       ],
      )

public/kcl-samples/multi-axis-robot/globals.kcl

@@ -28,37 +28,37 @@ export axisJ3CArmThickness = 2.5
 
 // Planes
 export plane001 = {
-    plane = {
+  plane = {
-      origin = [0.0, 0.0, baseHeight - 1.5 + 0.1],
+    origin = [0.0, 0.0, baseHeight - 1.5 + 0.1],
-      xAxis = [1.0, 0.0, 0.0],
+    xAxis = [1.0, 0.0, 0.0],
-      yAxis = [0.0, 1.0, 0.0],
+    yAxis = [0.0, 1.0, 0.0],
-      zAxis = [0.0, 0.0, 1.0]
+    zAxis = [0.0, 0.0, 1.0]
-    }
   }
+}
 
 export plane002 = {
-    plane = {
+  plane = {
-      origin = [0.0, 0.0, 0.0],
+    origin = [0.0, 0.0, 0.0],
-      xAxis = [
+    xAxis = [
-        sin(toRadians(axisJ1)),
+      sin(toRadians(axisJ1)),
-        cos(toRadians(axisJ1)),
+      cos(toRadians(axisJ1)),
-        0.0
+      0.0
-      ],
+    ],
-      yAxis = [0.0, 0.0, 1.0],
+    yAxis = [0.0, 0.0, 1.0],
-      zAxis = [1.0, 0.0, 0.0]
+    zAxis = [1.0, 0.0, 0.0]
-    }
   }
+}
 
 // Define Plane to Move J2 Axis Robot Arm
 export plane003 = {
-    plane = {
+  plane = {
-      origin = [-0.1, 0.0, 0.0],
+    origin = [-0.1, 0.0, 0.0],
-      xAxis = [
+    xAxis = [
-        sin(toRadians(axisJ1)),
+      sin(toRadians(axisJ1)),
-        cos(toRadians(axisJ1)),
+      cos(toRadians(axisJ1)),
-        0.0
+      0.0
-      ],
+    ],
-      yAxis = [0.0, 0.0, 1.0],
+    yAxis = [0.0, 0.0, 1.0],
-      zAxis = [1.0, 0.0, 0.0]
+    zAxis = [1.0, 0.0, 0.0]
-    }
+  }
-  }
+}

public/kcl-samples/multi-axis-robot/main.kcl

@@ -4,10 +4,10 @@
 // Set Units
 @settings(defaultLengthUnit = in)
 
-import 'robot-arm-base.kcl' as robotArmBase
+import "robot-arm-base.kcl" as robotArmBase
-import 'robot-rotating-base.kcl' as rotatingBase
+import "robot-rotating-base.kcl" as rotatingBase
-import 'robot-arm-j2.kcl' as j2RobotArm
+import "robot-arm-j2.kcl" as j2RobotArm
-import 'robot-arm-j3.kcl' as j3RobotArm
+import "robot-arm-j3.kcl" as j3RobotArm
 
 robotArmBase
 rotatingBase

public/kcl-samples/multi-axis-robot/robot-arm-base.kcl

@@ -1,15 +1,13 @@
 // Robot Arm Base
 
-
 // Set Units
 @settings(defaultLengthUnit = in)
 
-
 // Import Constants
 import basePlateRadius, basePlateThickness, baseChamfer, baseHeight from "globals.kcl"
 
 // Base Plate
-sketch001 = startSketchOn('XY')
+sketch001 = startSketchOn(XY)
   |> startProfileAt([-basePlateRadius, -basePlateRadius], %)
   |> angledLine([0, 2 * basePlateRadius], %, $rectangleSegmentA001)
   |> angledLine([
@@ -30,17 +28,14 @@ extrude001 = extrude(sketch001, length = basePlateThickness)
          getNextAdjacentEdge(rectangleSegmentB001),
          getNextAdjacentEdge(rectangleSegmentC001),
          getNextAdjacentEdge(rectangleSegmentD001)
-       ]
+       ],
      )
 
 // Base Motor for actuating first joint
 sketch002 = startSketchOn(extrude001, 'END')
   |> circle(center = [0, 0], radius = 4, tag = $referenceEdge)
 extrude002 = extrude(sketch002, length = baseHeight - basePlateThickness - 1.5)
-  |> fillet(
+  |> fillet(radius = 0.1, tags = [getOppositeEdge(referenceEdge)])
-       radius = 0.1,
-       tags = [getOppositeEdge(referenceEdge)]
-     )
 sketch003 = startSketchOn(extrude002, 'END')
   |> circle(center = [0, 0], radius = 0.5)
 extrude003 = extrude(sketch003, length = 1)
@@ -52,13 +47,13 @@ sketch4A = startSketchOn(extrude001, 'END')
          -basePlateRadius + 1,
          -basePlateRadius + baseChamfer + 0.5
        ],
-       radius = 0.4
+       radius = 0.4,
      )
   |> patternCircular2d(
        arcDegrees = 360,
        center = [0, 0],
        instances = 4,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 
 extrude4A = extrude(sketch4A, length = -basePlateThickness)
@@ -69,13 +64,13 @@ sketch4B = startSketchOn(extrude001, 'END')
          -basePlateRadius + 0.5 + baseChamfer,
          -basePlateRadius + 1
        ],
-       radius = 0.4
+       radius = 0.4,
      )
   |> patternCircular2d(
        arcDegrees = 360,
        center = [0, 0],
        instances = 4,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 
 extrude(sketch4B, length = -basePlateThickness)

public/kcl-samples/multi-axis-robot/robot-arm-j2.kcl

@@ -1,10 +1,8 @@
 // J2 Axis for Robot Arm
 
-
 // Set Units
 @settings(defaultLengthUnit = in)
 
-
 import axisJ1, axisJ2, axisJ2ArmWidth, axisJ2ArmLength, axisJ2ArmThickness, plane003 from "globals.kcl"
 
 // Create Body of J2 Robot Arm
@@ -35,24 +33,19 @@ sketch012 = startSketchOn(extrude011, 'START')
   |> circle(center = [-1.75, 8], radius = 1.9, tag = $referenceEdge4)
 
 extrude012 = extrude(sketch012, length = 0.15)
-  |> fillet(
+  |> fillet(radius = 0.1, tags = [getOppositeEdge(referenceEdge4)])
-       radius = 0.1,
-       tags = [getOppositeEdge(referenceEdge4)]
-     )
 sketch013 = startSketchOn(extrude011, 'START')
   |> circle(
-     center = [
+       center = [
          -1.75 - (axisJ2ArmLength * cos(toRadians(axisJ2))),
          8 + axisJ2ArmLength * sin(toRadians(axisJ2))
        ],
-     radius = 1.9,
+       radius = 1.9,
-     tag = $referenceEdge5)
+       tag = $referenceEdge5,
+     )
 
 extrude013 = extrude(sketch013, length = 1)
-  |> fillet(
+  |> fillet(radius = 0.1, tags = [getOppositeEdge(referenceEdge5)])
-       radius = 0.1,
-       tags = [getOppositeEdge(referenceEdge5)]
-     )
 
 // Draw Bolt Patterns on J2 Robot Arm
 sketch014 = startSketchOn(extrude012, 'END')
@@ -61,7 +54,7 @@ sketch014 = startSketchOn(extrude012, 'END')
        center = [-1.75, 8],
        instances = 8,
        arcDegrees = 360,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 
 extrude014 = extrude(sketch014, length = 0.15)
@@ -72,7 +65,7 @@ sketch015 = startSketchOn(extrude013, 'END')
          -1.75 - ((axisJ2ArmLength - 1) * cos(toRadians(axisJ2))),
          8 + (axisJ2ArmLength - 1.5) * sin(toRadians(axisJ2))
        ],
-       radius = 0.2
+       radius = 0.2,
      )
   |> patternCircular2d(
        center = [
@@ -81,7 +74,7 @@ sketch015 = startSketchOn(extrude013, 'END')
        ],
        instances = 4,
        arcDegrees = 360,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 
 extrude015 = extrude(sketch015, length = 0.15)
@@ -92,7 +85,7 @@ sketch016 = startSketchOn(extrude011, 'END')
          1.75 + axisJ2ArmLength * cos(toRadians(axisJ2)),
          8 + axisJ2ArmLength * sin(toRadians(axisJ2))
        ],
-       radius = 0.3
+       radius = 0.3,
      )
 
 extrude(sketch016, length = 1)

public/kcl-samples/multi-axis-robot/robot-arm-j3.kcl

@@ -1,10 +1,8 @@
 // J3 Robot Arm
 
-
 // Set Units
 @settings(defaultLengthUnit = in)
 
-
 import plane002, axisJ2, axisJ3C, axisJ4, axisJ2ArmLength, axisJ3CArmLength, axisJ3CArmWidth, axisJ3CArmThickness from "globals.kcl"
 
 // Create Body of J3 Robot Arm
@@ -38,13 +36,11 @@ sketch018 = startSketchOn(extrude017, 'END')
          8 + axisJ2ArmLength * sin(toRadians(axisJ2))
        ],
        radius = 3.7 / 2,
-     tag = $referenceEdge6)
+       tag = $referenceEdge6,
+     )
 
 extrude018 = extrude(sketch018, length = 0.15)
-  |> fillet(
+  |> fillet(radius = 0.1, tags = [getOppositeEdge(referenceEdge6)])
-       radius = 0.1,
-       tags = [getOppositeEdge(referenceEdge6)]
-     )
 
 // Draw Bolt Pattern on J3 Robot Arm
 sketch019 = startSketchOn(extrude018, 'END')
@@ -53,7 +49,7 @@ sketch019 = startSketchOn(extrude018, 'END')
          1.75 + (axisJ2ArmLength - 1) * cos(toRadians(axisJ2)),
          8 + (axisJ2ArmLength - 1.5) * sin(toRadians(axisJ2))
        ],
-       radius = 0.2
+       radius = 0.2,
      )
   |> patternCircular2d(
        center = [
@@ -62,7 +58,7 @@ sketch019 = startSketchOn(extrude018, 'END')
        ],
        instances = 8,
        arcDegrees = 360,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 
 extrude019 = extrude(sketch019, length = 0.15)
@@ -74,7 +70,7 @@ sketch020 = startSketchOn(extrude017, 'START')
          -1.75 - (axisJ2ArmLength * cos(toRadians(axisJ2))) - (axisJ3CArmLength * cos(toRadians(axisJ3C))),
          8 + axisJ2ArmLength * sin(toRadians(axisJ2)) + axisJ3CArmLength * sin(toRadians(axisJ3C))
        ],
-       radius = axisJ3CArmWidth / 2
+       radius = axisJ3CArmWidth / 2,
      )
 extrude020 = extrude(sketch020, length = -0.5)
 
@@ -84,7 +80,7 @@ sketch021 = startSketchOn(extrude017, 'END')
          1.75 + axisJ2ArmLength * cos(toRadians(axisJ2)) + axisJ3CArmLength * cos(toRadians(axisJ3C)),
          8 + axisJ2ArmLength * sin(toRadians(axisJ2)) + axisJ3CArmLength * sin(toRadians(axisJ3C))
        ],
-       radius = axisJ3CArmWidth / 2.01
+       radius = axisJ3CArmWidth / 2.01,
      )
 
 extrude021 = extrude(sketch021, length = -0.5)

public/kcl-samples/multi-axis-robot/robot-rotating-base.kcl

@@ -1,20 +1,15 @@
 // Robot Rotating Base
 
-
 // Set Units
 @settings(defaultLengthUnit = in)
 
-
 import axisJ1, baseHeight, plane001, plane002 from "globals.kcl"
 
 // Create Rotating Base
 sketch005 = startSketchOn(plane001)
   |> circle(center = [0, 0], radius = 3.9, tag = $referenceEdge1)
 extrude005 = extrude(sketch005, length = 1.5 - 0.1)
-  |> fillet(
+  |> fillet(radius = 0.1, tags = [getOppositeEdge(referenceEdge1)])
-       radius = 0.1,
-       tags = [getOppositeEdge(referenceEdge1)]
-     )
   |> appearance(color = "#4f7d54", metalness = 90, roughness = 90)
 
 sketch006 = startSketchOn(plane002)
@@ -38,12 +33,10 @@ sketch007 = startSketchOn(extrude006, 'END')
          8
        ],
        radius = 2.75,
-       tag = $referenceEdge2)
+       tag = $referenceEdge2,
-extrude007 = extrude(sketch007, length = 1.5)
-  |> fillet(
-       radius = 0.1,
-       tags = [getOppositeEdge(referenceEdge2)]
      )
+extrude007 = extrude(sketch007, length = 1.5)
+  |> fillet(radius = 0.1, tags = [getOppositeEdge(referenceEdge2)])
 
 // Draw Bolt Pattern on Rotating Base
 sketch008 = startSketchOn(extrude007, 'END')
@@ -52,7 +45,7 @@ sketch008 = startSketchOn(extrude007, 'END')
          1.75 * cos(toRadians(axisJ1)) / abs(cos(toRadians(axisJ1))),
          6.75
        ],
-       radius = 0.2
+       radius = 0.2,
      )
   |> patternCircular2d(
        center = [
@@ -61,7 +54,7 @@ sketch008 = startSketchOn(extrude007, 'END')
        ],
        instances = 4,
        arcDegrees = 360,
-       rotateDuplicates = true
+       rotateDuplicates = true,
      )
 extrude008 = extrude(sketch008, length = 0.2)
 
@@ -72,12 +65,10 @@ sketch009 = startSketchOn(extrude007, 'END')
          8
        ],
        radius = 0.5,
-     tag = $referenceEdge3)
+       tag = $referenceEdge3,
-extrude009 = extrude(sketch009, length = 0.15)
-  |> fillet(
-       radius = 0.1,
-       tags = [getOppositeEdge(referenceEdge3)]
      )
+extrude009 = extrude(sketch009, length = 0.15)
+  |> fillet(radius = 0.1, tags = [getOppositeEdge(referenceEdge3)])
   |> appearance(color = "#4f7d54", metalness = 90, roughness = 90)
 
 sketch010 = startSketchOn(plane002)

public/kcl-samples/pipe-flange-assembly/1120t74-pipe.kcl

@@ -1,16 +1,16 @@
-// 1120t74 Pipe
+// Pipe
-
+// piping for the pipe flange assembly
-// import constants
-import pipeInnerDiameter, pipeOuterDiameter, pipeLength from "globals.kcl"
 
 // set units
 @settings(defaultLengthUnit = in)
 
+// import constants
+import pipeInnerDiameter, pipeOuterDiameter, pipeLength from "globals.kcl"
+
 // create a function to make the pipe
 export fn pipe() {
-
   // create the pipe base
-  pipeBase = startSketchOn('XZ')
+  pipeBase = startSketchOn(XZ)
     |> circle(%, center = [0, 0], radius = pipeOuterDiameter / 2)
     |> extrude(%, length = pipeLength)
 

public/kcl-samples/pipe-flange-assembly/68095k348-flange.kcl

@@ -1,16 +1,16 @@
 // 68095k348 flange
-
+// flange used for mating two pipes together in the pipe flange assembly.
-// import constants
-import pipeDiameter, mountingHoleDiameter, mountingHolePlacementDiameter, flangeDiameter, flangeTotalThickness, flangeBackHeight, flangeFrontHeight, flangeBaseThickness, flangeBackDiameter, flangeFrontDiameter from "globals.kcl"
 
 // set units
 @settings(defaultLengthUnit = in)
 
+// import constants
+import pipeDiameter, mountingHoleDiameter, mountingHolePlacementDiameter, flangeDiameter, flangeTotalThickness, flangeBackHeight, flangeFrontHeight, flangeBaseThickness, flangeBackDiameter, flangeFrontDiameter from "globals.kcl"
+
 // create a function to create the flange
 export fn flange() {
-
   // sketch the mounting hole pattern
-  mountingHoles = startSketchOn("XY")
+  mountingHoles = startSketchOn(XY)
     |> circle(%, center = [0, mountingHolePlacementDiameter / 2], radius = mountingHoleDiameter / 2)
     |> patternCircular2d(
          %,
@@ -21,7 +21,7 @@ export fn flange() {
        )
 
   // create the flange base
-  flangeBase = startSketchOn("XY")
+  flangeBase = startSketchOn(XY)
     |> circle(%, center = [0, 0], radius = flangeDiameter / 2)
     |> hole(mountingHoles, %)
     |> extrude(%, length = flangeBaseThickness)

public/kcl-samples/pipe-flange-assembly/91251a404-bolt.kcl

@@ -1,16 +1,17 @@
 // 91251A404 Socket Head Cap Screw
-
+// screw for mating the flanges together in the pipe flange assembly
-// import constants
-import boltDiameter, boltLength, boltHeadLength, boltHeadDiameter, boltHexDrive, boltHexFlatLength, boltThreadLength from "globals.kcl"
 
 // set units
 @settings(defaultLengthUnit = in)
 
+
+// import constants
+import boltDiameter, boltLength, boltHeadLength, boltHeadDiameter, boltHexDrive, boltHexFlatLength, boltThreadLength from "globals.kcl"
+
 // create a function to make a the bolt
 export fn bolt() {
-
   // Create the head of the cap screw
-  boltHead = startSketchOn('XZ')
+  boltHead = startSketchOn(XZ)
     |> circle(center = [0, 0], radius = boltHeadDiameter / 2, tag = $topEdge)
     |> extrude(length = -boltHeadLength)
     |> fillet(radius = 0.020, tags = [topEdge, getOppositeEdge(topEdge)])

public/kcl-samples/pipe-flange-assembly/9472k188-gasket.kcl

@@ -1,16 +1,16 @@
 // 9472K188 Gasket
-
+// gasket for the pipe flange assembly. A gasket is a mechanical seal that fills the space between two or more mating surfaces, preventing leaks of liquids or gases under compression
-// import constants
-import gasketOutsideDiameter, gasketInnerDiameter, gasketThickness from "globals.kcl"
 
 // set units
 @settings(defaultLengthUnit = in)
 
+// import constants
+import gasketOutsideDiameter, gasketInnerDiameter, gasketThickness from "globals.kcl"
+
 // create a function to make the gasket
 export fn gasket() {
-
   // create the base of the gasket
-  gasketBase = startSketchOn("XY")
+  gasketBase = startSketchOn(XY)
     |> circle(%, center = [0, 0], radius = gasketOutsideDiameter / 2)
     |> extrude(%, length = gasketThickness)
 

public/kcl-samples/pipe-flange-assembly/95479a127-hex-nut.kcl

@@ -1,16 +1,16 @@
 // 95479A127 Hex Nut
-
+// hex nut for the screws in the pipe flange assembly.
-// import constants
-import hexNutDiameter, hexNutFlatToFlat, hexNutThickness, hexNutFlatLength from "globals.kcl"
 
 // set units
 @settings(defaultLengthUnit = in)
 
+// import constants
+import hexNutDiameter, hexNutFlatToFlat, hexNutThickness, hexNutFlatLength from "globals.kcl"
+
 // create a function to make the hex nut
 export fn hexNut() {
-
   // create the base of the hex nut
-  hexNutBase = startSketchOn('XY')
+  hexNutBase = startSketchOn(XY)
     |> startProfileAt([
          hexNutFlatToFlat / 2,
          hexNutFlatLength / 2

public/kcl-samples/pipe-flange-assembly/98017a257-washer.kcl

@@ -1,16 +1,16 @@
 // 98017A257 Washer
-
+// washer for the screws in the pipe flange assembly. 
-// import constants
-import washerInnerDia, washerOuterDia, washerThickness from "globals.kcl"
 
 // set units
 @settings(defaultLengthUnit = in)
 
+// import constants
+import washerInnerDia, washerOuterDia, washerThickness from "globals.kcl"
+
 // create a function to make the washer
 export fn washer() {
-
   // create the base of the washer
-  washerBase = startSketchOn('XY')
+  washerBase = startSketchOn(XY)
     |> circle(center = [0, 0], radius = washerOuterDia / 2)
     |> extrude(length = washerThickness)
 

public/kcl-samples/pipe-flange-assembly/main.kcl

@@ -5,54 +5,120 @@
 @settings(defaultLengthUnit = in)
 
 // import constants
-import * from 'globals.kcl'
+import * from "globals.kcl"
 
 // import parts
-import flange from '68095k348-flange.kcl'
+import flange from "68095k348-flange.kcl"
-import gasket from '9472k188-gasket.kcl'
+import gasket from "9472k188-gasket.kcl"
-import washer from '98017a257-washer.kcl'
+import washer from "98017a257-washer.kcl"
-import bolt from '91251a404-bolt.kcl'
+import bolt from "91251a404-bolt.kcl"
-import hexNut from '95479a127-hex-nut.kcl'
+import hexNut from "95479a127-hex-nut.kcl"
-import pipe from '1120t74-pipe.kcl'
+import pipe from "1120t74-pipe.kcl"
 
 // place flanges
 flange()
 flange()
   |> rotate(axis = [0, 1, 0], angle = 180)
-  |> translate(translate = [0, 0, flangeBackHeight*2 + gasketThickness])
+  |> translate(translate = [
+       0,
+       0,
+       flangeBackHeight * 2 + gasketThickness
+     ])
 
 // place gasket between the flanges
 gasket()
-  |> translate(translate = [0, 0, -flangeBackHeight - gasketThickness])
+  |> translate(translate = [
+       0,
+       0,
+       -flangeBackHeight - gasketThickness
+     ])
 
 // place eight washers (four front, four back)
 washer()
   |> translate(translate = [
-    mountingHolePlacementDiameter/2, 
+       mountingHolePlacementDiameter / 2,
-    0, 
+       0,
-    flangeBaseThickness
+       flangeBaseThickness
-  ])
+     ])
-  |> patternCircular3d(%, instances = 4, axis = [0, 0, 1], center = [0, 0, 0], arcDegrees = 360, rotateDuplicates = false)
+  |> patternCircular3d(
-  |> patternLinear3d(%, instances = 2, distance = -(flangeBaseThickness*2 + flangeBackHeight * 2 + gasketThickness + washerThickness), axis = [0, 0, 1])
+       %,
+       instances = 4,
+       axis = [0, 0, 1],
+       center = [0, 0, 0],
+       arcDegrees = 360,
+       rotateDuplicates = false,
+     )
+  |> patternLinear3d(
+       %,
+       instances = 2,
+       distance = -(flangeBaseThickness * 2 + flangeBackHeight * 2 + gasketThickness + washerThickness),
+       axis = [0, 0, 1],
+     )
 
 // place four bolts
 bolt()
   |> translate(translate = [
-    mountingHolePlacementDiameter/2, 0, flangeBaseThickness + washerThickness
+       mountingHolePlacementDiameter / 2,
-  ])
+       0,
+       flangeBaseThickness + washerThickness
+     ])
   |> rotate(roll = 90, pitch = 0, yaw = 0)
-  |> patternCircular3d(%, instances = 4, axis = [0, 0, 1], center = [0, 0, 0], arcDegrees = 360, rotateDuplicates = false)
+  |> patternCircular3d(
+       %,
+       instances = 4,
+       axis = [0, 0, 1],
+       center = [0, 0, 0],
+       arcDegrees = 360,
+       rotateDuplicates = false,
+     )
 
 // place four hex nuts
 hexNut()
-  |> translate(translate = [mountingHolePlacementDiameter/2, 0, -(flangeBackHeight * 2 + gasketThickness + flangeBaseThickness + washerThickness + hexNutThickness)])
+  |> translate(translate = [
-  |> patternCircular3d(%, instances = 4, axis = [0, 0, 1], center = [0, 0, 0], arcDegrees = 360, rotateDuplicates = false)
+       mountingHolePlacementDiameter / 2,
+       0,
+       -(flangeBackHeight * 2 + gasketThickness + flangeBaseThickness + washerThickness + hexNutThickness)
+     ])
+  |> patternCircular3d(
+       %,
+       instances = 4,
+       axis = [0, 0, 1],
+       center = [0, 0, 0],
+       arcDegrees = 360,
+       rotateDuplicates = false,
+     )
 
 // place both pieces of pipe
 pipe()
-  |> rotate(%, roll = -90, pitch = 0, yaw = 0)
+  |> rotate(
-  |> translate(%, translate = [0, 0, flangeBaseThickness + flangeFrontHeight - 0.5], global = true)
+       %,
+       roll = -90,
+       pitch = 0,
+       yaw = 0,
+     )
+  |> translate(
+       %,
+       translate = [
+         0,
+         0,
+         flangeBaseThickness + flangeFrontHeight - 0.5
+       ],
+       global = true,
+     )
 
 pipe()
-  |> rotate(%, roll = 90, pitch = 0, yaw = 0)
+  |> rotate(
-  |> translate(%, translate = [0, 0, -(flangeBackHeight * 2 + gasketThickness + flangeBaseThickness  + flangeFrontHeight - 0.5)], global = true)
+       %,
+       roll = 90,
+       pitch = 0,
+       yaw = 0,
+     )
+  |> translate(
+       %,
+       translate = [
+         0,
+         0,
+         -(flangeBackHeight * 2 + gasketThickness + flangeBaseThickness + flangeFrontHeight - 0.5)
+       ],
+       global = true,
+     )

public/kcl-samples/pipe-with-bend/main.kcl

@@ -1,7 +1,6 @@
 // Pipe with bend
 // A tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances that can flow.
 
-
 // Set units
 @settings(defaultLengthUnit = in)
 
@@ -12,7 +11,7 @@ bendRadius = 30
 bendAngle = 90
 
 // create a sketch in the 'XZ' plane
-sketch000 = startSketchOn("XZ")
+sketch000 = startSketchOn(XZ)
 
 // create a profile for the outer diameter
 outerProfile = circle(sketch000, center = [bendRadius, 0], radius = outerDiameter / 2)

public/kcl-samples/pipe/main.kcl

@@ -15,7 +15,7 @@ pipeTransitionLength = 0.5
 pipeSmallDiaLength = pipeTotalLength - pipeTransitionLength - pipeLargeDiaLength
 
 // Create the sketch to be revolved around the y-axis. Use the small diameter, large diameter, length, and thickness to define the sketch.
-pipeSketch = startSketchOn('XY')
+pipeSketch = startSketchOn(XY)
   |> startProfileAt([pipeSmallDia - (thickness / 2), 38], %)
   |> line(end = [thickness, 0])
   |> line(end = [0, -pipeSmallDiaLength])

public/kcl-samples/poopy-shoe/main.kcl

@@ -1,11 +1,9 @@
 // Poopy Shoe
 // poop shute for bambu labs printer - optimized for printing.
 
-
 // Set units
 @settings(defaultLengthUnit = in)
 
-
 wallThickness = 0.125
 wallsWidth = 3
 height = 5.125
@@ -14,7 +12,7 @@ backLength = 6
 exitHeight = 1
 frontLength = 7
 
-sketch001 = startSketchOn("-YZ")
+sketch001 = startSketchOn(-YZ)
   |> startProfileAt([wallsWidth / 2, 0], %)
   |> xLine(length = wallThickness / 2)
   |> angledLineToX({ angle = 60, to = wallsWidth }, %, $seg01)
@@ -32,17 +30,18 @@ sketch001 = startSketchOn("-YZ")
   |> yLine(endAbsolute = segEndY(seg01))
   |> angledLineToY({ angle = 180 - 60, to = 0 }, %)
   |> close()
-part001 = revolve(sketch001, 
+part001 = revolve(
+  sketch001,
   angle = 90,
   axis = {
     custom = {
       axis = [1.0, 0.0],
       origin = [0.0, height + .0001]
     }
-  }
+  },
 )
 
-sketch002 = startSketchOn('-YZ')
+sketch002 = startSketchOn(-YZ)
   |> startProfileAt([wallsWidth / 2, 0], %)
   |> xLine(length = wallThickness / 2)
   |> angledLineToX({ angle = 60, to = wallsWidth }, %, $seg02)

public/kcl-samples/router-template-cross-bar/main.kcl

@@ -13,7 +13,7 @@ templateThickness = 10
 radius = 10
 depth = 30
 distanceToInsideEdge = slateWidthHalf + templateThickness + templateGap
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([ZERO, depth + templateGap], %)
   |> xLine(length = slateWidthHalf - radius, tag = $seg01)
   |> arc({

public/kcl-samples/router-template-slate/main.kcl

@@ -17,7 +17,7 @@ length001 = slateWidthHalf - radius
 length002 = depth + minClampingDistance
 
 // Create the first sketch
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, depth - templateGap], %)
   |> xLine(length = length001, tag = $seg01)
   |> arc({

public/kcl-samples/sheet-metal-bracket/main.kcl

@@ -15,7 +15,7 @@ boltSize = 0.25
 flangeWidth = 1.5
 
 // Sketch and extrude the base shape and fillet the inside and outside edges.
-baseExtrusion = startSketchOn('-XZ')
+baseExtrusion = startSketchOn(-XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [0, thickness], tag = $e1)
   |> line(end = [flangeLength, 0], tag = $e2)
@@ -30,82 +30,46 @@ baseExtrusion = startSketchOn('-XZ')
   |> line(end = [0, -hatHeight], tag = $e11)
   |> close(tag = $e12)
   |> extrude(length = hatWidth)
-  |> fillet(
+  |> fillet(radius = bendRad, tags = [getNextAdjacentEdge(e2)])
-       radius = bendRad,
+  |> fillet(radius = outsideBendRad, tags = [getNextAdjacentEdge(e3)])
-       tags = [getNextAdjacentEdge(e2)]
+  |> fillet(radius = outsideBendRad, tags = [getNextAdjacentEdge(e4)])
-     )
+  |> fillet(radius = bendRad, tags = [getNextAdjacentEdge(e5)])
-  |> fillet(
+  |> fillet(radius = outsideBendRad, tags = [getNextAdjacentEdge(e8)])
-       radius = outsideBendRad,
+  |> fillet(radius = bendRad, tags = [getNextAdjacentEdge(e9)])
-       tags = [getNextAdjacentEdge(e3)]
+  |> fillet(radius = bendRad, tags = [getNextAdjacentEdge(e10)])
-     )
+  |> fillet(radius = outsideBendRad, tags = [getNextAdjacentEdge(e11)])
-  |> fillet(
-       radius = outsideBendRad,
-       tags = [getNextAdjacentEdge(e4)]
-     )
-  |> fillet(
-       radius = bendRad,
-       tags = [getNextAdjacentEdge(e5)]
-     )
-  |> fillet(
-       radius = outsideBendRad,
-       tags = [getNextAdjacentEdge(e8)]
-     )
-  |> fillet(
-       radius = bendRad,
-       tags = [getNextAdjacentEdge(e9)]
-     )
-  |> fillet(
-       radius = bendRad,
-       tags = [getNextAdjacentEdge(e10)]
-     )
-  |> fillet(
-       radius = outsideBendRad,
-       tags = [getNextAdjacentEdge(e11)]
-     )
 
 // Define the flanges and place the bolt holes
-flange1 = startSketchOn('XY')
+flange1 = startSketchOn(XY)
   |> startProfileAt([0, 0], %)
   |> line(end = [0, hatWidth])
   |> line(end = [flangeWidth, 0], tag = $e13)
   |> line(end = [0, -hatWidth], tag = $e14)
   |> close()
-  |> hole(circle(
+  |> hole(circle(center = [0.75, 1], radius = boltSize), %)
-       center = [0.75, 1],
+  |> hole(circle(center = [0.75, 4], radius = boltSize), %)
-       radius = boltSize
-     ), %)
-  |> hole(circle(
-       center = [0.75, 4],
-       radius = boltSize
-     ), %)
   |> extrude(length = thickness)
   |> fillet(
        radius = 0.5,
        tags = [
          getNextAdjacentEdge(e13),
          getNextAdjacentEdge(e14)
-       ]
+       ],
      )
 
-flange2 = startSketchOn('XY')
+flange2 = startSketchOn(XY)
   |> startProfileAt([-6, 0], %)
   |> line(end = [0, hatWidth])
   |> line(end = [-flangeWidth, 0], tag = $e15)
   |> line(end = [0, -hatWidth], tag = $e16)
   |> close()
-  |> hole(circle(
+  |> hole(circle(center = [-6.75, 1], radius = boltSize), %)
-       center = [-6.75, 1],
+  |> hole(circle(center = [-6.75, 4], radius = boltSize), %)
-       radius = boltSize
-     ), %)
-  |> hole(circle(
-       center = [-6.75, 4],
-       radius = boltSize
-     ), %)
   |> extrude(length = thickness)
   |> fillet(
        radius = 0.25,
        tags = [
          getNextAdjacentEdge(e15),
          getNextAdjacentEdge(e16)
-       ]
+       ],
      )

public/kcl-samples/socket-head-cap-screw/main.kcl

@@ -5,24 +5,19 @@
 @settings(defaultLengthUnit = in, defaultAngleUnit = deg)
 
 export boltDiameter = 0.190
-export boltLength = 1.00
+export boltLength = 1.0
 export boltHeadLength = boltDiameter
 export boltHeadDiameter = 0.313
-export boltHexDrive = 5/32
+export boltHexDrive = 5 / 32
 export boltHexFlatLength = boltHexDrive / (2 * cos(toRadians(30)))
 
-export fn bolt () {
+export fn bolt() {
-  
   // Create the head of the cap screw
-  boltHead = startSketchOn('XZ')
+  boltHead = startSketchOn(XZ)
-    |> circle(
+    |> circle(center = [0, 0], radius = boltHeadDiameter / 2, tag = $topEdge)
-         center = [0, 0],
-         radius = boltHeadDiameter / 2,
-         tag = $topEdge
-       )
     |> extrude(length = -boltHeadLength)
     |> fillet(radius = 0.020, tags = [topEdge, getOppositeEdge(topEdge)])
-  
+
   // Define the sketch of the hex pattern on the screw head
   hexPatternSketch = startSketchOn(boltHead, 'start')
     |> startProfileAt([
@@ -51,7 +46,6 @@ export fn bolt () {
        }, %)
     |> close()
     |> extrude(length = -boltHeadLength * 0.75)
-  
   boltBody = startSketchOn(boltHead, 'end')
     |> circle(center = [0, 0], radius = boltDiameter / 2, tag = $filletEdge)
     |> extrude(length = boltLength)

public/kcl-samples/walkie-talkie/antenna.kcl

@@ -1,24 +1,23 @@
-// Antenna
+// Walkie talkie antenna
-
+// antenna for the walkie talkie assembly
-
-// import constants
-import antennaLength, antennaBaseWidth, antennaBaseHeight, antennaTopWidth, antennaTopHeight from "globals.kcl"
 
 // Set units
 @settings(defaultLengthUnit = in)
 
-export fn antenna () {
+// import constants
+import antennaLength, antennaBaseWidth, antennaBaseHeight, antennaTopWidth, antennaTopHeight from "globals.kcl"
+
+export fn antenna() {
   // Create the antenna base sketch
-  sketch001 = startSketchOn('XY')
+  sketch001 = startSketchOn(XY)
     |> startProfileAt([0, 0], %)
     |> line(end = [antennaBaseWidth, 0])
     |> line(end = [0, -antennaBaseHeight])
     |> line(end = [-antennaBaseWidth, 0])
     |> close()
-  
+
   // Create the antenna top sketch
-  loftPlane = offsetPlane('XY', offset = antennaLength)
+  loftPlane = offsetPlane(XY, offset = antennaLength)
-  
   sketch002 = startSketchOn(loftPlane)
     |> startProfileAt([
          (antennaBaseWidth - antennaTopWidth) / 2,
@@ -28,10 +27,9 @@ export fn antenna () {
     |> yLine(length = -antennaTopHeight)
     |> xLine(length = -antennaTopWidth)
     |> close()
-  
+
   // Create the antenna using a loft
   antenna = loft([sketch001, sketch002])
     |> appearance(color = "#000000")
   return antenna
-  
 }

public/kcl-samples/walkie-talkie/body.kcl

@@ -1,16 +1,16 @@
 // Walkie talkie body
-
+// the main body of the walkie talkie assembly
-// import constants
-import height, width, thickness, chamferLength, offset, screenWidth, screenHeight, screenYPosition, screenDepth, speakerBoxWidth, speakerBoxHeight from "globals.kcl"
 
 // set units
 @settings(defaultLengthUnit = in)
 
-// create a function to define the body
+// import constants
-export fn body () {
+import height, width, thickness, chamferLength, offset, screenWidth, screenHeight, screenYPosition, screenDepth, speakerBoxWidth, speakerBoxHeight from "globals.kcl"
 
+// create a function to define the body
+export fn body() {
   // sketch and extrude the body of the walkie talkie
-  bodySketch = startSketchOn('XZ')
+  bodySketch = startSketchOn(XZ)
     |> startProfileAt([-width / 2, height / 2], %)
     |> xLine(length = width, tag = $chamfer1)
     |> yLine(length = -height, tag = $chamfer2)
@@ -24,7 +24,7 @@ export fn body () {
            getNextAdjacentEdge(chamfer2),
            getNextAdjacentEdge(chamfer3),
            getNextAdjacentEdge(chamfer4)
-         ]
+         ],
        )
 
   // cut out the indentation for the case
@@ -57,7 +57,7 @@ export fn body () {
        }, %)
     |> close()
   extrude002 = extrude(sketch002, length = -0.0625)
-  
+
   // Create the pocket for the screen
   sketch003 = startSketchOn(extrude002, 'start')
     |> startProfileAt([-screenWidth / 2, screenYPosition], %)
@@ -67,7 +67,7 @@ export fn body () {
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
   extrude003 = extrude(sketch003, length = screenDepth)
-  
+
   // Create the speaker box
   sketch004 = startSketchOn(extrude002, 'start')
     |> startProfileAt([-1.25 / 2, -.125], %)
@@ -77,9 +77,7 @@ export fn body () {
     |> close()
 
   body = extrude(sketch004, length = -.5)
-    |> appearance(
+    |> appearance(color = "#277bb0")
-      color = "#277bb0",
-    )
   return body
 }
 

public/kcl-samples/walkie-talkie/button.kcl

@@ -4,26 +4,16 @@
 @settings(defaultLengthUnit = in)
 
 // import constants
-import buttonWidth, buttonHeight, buttonThickness from 'globals.kcl'
+import buttonWidth, buttonHeight, buttonThickness from "globals.kcl"
 
 // create a function to define the button
 export fn button() {
-
   // sketch the button profile and extrude
-  buttonSketch = startSketchOn('XZ')
+  buttonSketch = startSketchOn(XZ)
     |> startProfileAt([0, 0], %)
-    |> angledLine({
+    |> angledLine({ angle = 180, length = buttonWidth }, %, $tag1)
-         angle = 180,
+    |> angledLine({ angle = 270, length = buttonHeight }, %, $tag2)
-         length = buttonWidth
+    |> angledLine({ angle = 0, length = buttonWidth }, %)
-       }, %, $tag1)
-    |> angledLine({
-         angle = 270,
-         length = buttonHeight
-       }, %, $tag2)
-    |> angledLine({
-         angle = 0,
-         length = buttonWidth
-       }, %)
     |> close()
   buttonExtrude = extrude(buttonSketch, length = buttonThickness)
     |> chamfer(
@@ -31,9 +21,9 @@ export fn button() {
          tags = [
            getNextAdjacentEdge(tag1),
            getNextAdjacentEdge(tag2)
-         ]
+         ],
        )
-     |> appearance(color = "#ff0000")
+    |> appearance(color = "#ff0000")
 
   return buttonExtrude
-}
+}

public/kcl-samples/walkie-talkie/case.kcl

@@ -1,25 +1,24 @@
 // Walkie talkie case
+// the plastic case for the front of the walkie talkie
 
+// set units
+@settings(defaultLengthUnit = in)
 
 // import constants and Zoo logo
 import width, height, chamferLength, offset, screenWidth, screenHeight, screenYPosition, screenDepth, speakerBoxWidth, speakerBoxHeight, squareHoleSideLength, caseTolerance from "globals.kcl"
 import zLogo, oLogo, oLogo2 from "zoo-logo.kcl"
 
-// set units
-@settings(defaultLengthUnit = in)
-
 // create a function to define the case
-export fn case () {
+export fn case() {
-
   // sketch the profile of the screen
-  sketch006 = startSketchOn(startSketchOn('XZ'))
+  sketch006 = startSketchOn(startSketchOn(XZ))
     |> startProfileAt([-screenWidth / 2, screenYPosition], %)
     |> xLine(length = screenWidth)
     |> yLine(length = -screenHeight)
     |> xLine(length = -screenWidth)
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
-  
+
   // create transform functions for the speaker grid pattern
   fn transformX(i) {
     return { translate = [.125 * i, 0] }
@@ -29,7 +28,7 @@ export fn case () {
   }
 
   // sketch the square hole grid pattern
-  squareHolePatternSketch = startSketchOn(startSketchOn('XZ'))
+  squareHolePatternSketch = startSketchOn(startSketchOn(XZ))
     |> startProfileAt([-screenWidth / 2 + .100, 0], %)
     |> line(end = [squareHoleSideLength / 2, 0])
     |> line(end = [0, -squareHoleSideLength / 2])
@@ -38,8 +37,8 @@ export fn case () {
     |> patternTransform2d(instances = 13, transform = transformX)
     |> patternTransform2d(instances = 11, transform = transformY)
 
-  // sketch the outer profile of the case and extrude with holes using the previously made profiles  
+  // sketch the outer profile of the case and extrude with holes using the previously made profiles
-  sketch005 = startSketchOn(startSketchOn('XZ'))
+  sketch005 = startSketchOn(startSketchOn(XZ))
     |> startProfileAt([
          -width / 2 + offset + caseTolerance,
          height / 2 - (chamferLength + (offset + caseTolerance) / 2 * cos(toRadians(45)))
@@ -77,14 +76,13 @@ export fn case () {
     |> hole(squareHolePatternSketch, %)
 
     // create the Zoo logo
-    |> hole(zLogo(startSketchOn('XZ'), [-.30, -1.825], .20), %)
+    |> hole(zLogo(startSketchOn(XZ), [-.30, -1.825], .20), %)
-    |> hole(oLogo(startSketchOn('XZ'), [-.075, -1.825], .20), %)
+    |> hole(oLogo(startSketchOn(XZ), [-.075, -1.825], .20), %)
-    |> hole(oLogo2(startSketchOn('XZ'), [-.075, -1.825], .20), %)
+    |> hole(oLogo2(startSketchOn(XZ), [-.075, -1.825], .20), %)
-    |> hole(oLogo(startSketchOn('XZ'), [.175, -1.825], .20), %)
+    |> hole(oLogo(startSketchOn(XZ), [.175, -1.825], .20), %)
-    |> hole(oLogo2(startSketchOn('XZ'), [.175, -1.825], .20), %)
+    |> hole(oLogo2(startSketchOn(XZ), [.175, -1.825], .20), %)
-  
   case = extrude(sketch005, length = -0.0625)
     |> appearance(color = '#D0FF01', metalness = 0, roughness = 50)
 
   return case
-}
+}

public/kcl-samples/walkie-talkie/globals.kcl

@@ -40,4 +40,4 @@ export knobRadius = 0.050
 
 // talk-button
 export talkButtonSideLength = 0.5
-export talkButtonHeight = 0.050
+export talkButtonHeight = 0.050

public/kcl-samples/walkie-talkie/knob.kcl

@@ -1,31 +1,28 @@
-// Walkie Talkie Frequency Knob
+// Walkie talkie frequency knob
-
+// the frequency knob for the walkie talkie assembly
-// import constants
-import width, thickness, height, knobDiameter, knobHeight, knobRadius from "globals.kcl"
 
 // set units
 @settings(defaultLengthUnit = in)
 
-// create a function to define the knob
+// import constants
-export fn knob () {
+import width, thickness, height, knobDiameter, knobHeight, knobRadius from "globals.kcl"
 
-// Create the knob sketch and revolve
+// create a function to define the knob
-knob = startSketchOn('XZ')
+export fn knob() {
-  |> startProfileAt([0.0001, 0], %)
+  // Create the knob sketch and revolve
-  |> xLine(length = knobDiameter / 2)
+  knob = startSketchOn(XZ)
-  |> yLine(length = knobHeight - 0.05)
+    |> startProfileAt([0.0001, 0], %)
-  |> arc({
+    |> xLine(length = knobDiameter / 2)
-       angleStart = 0,
+    |> yLine(length = knobHeight - 0.05)
-       angleEnd = 90,
+    |> arc({
-       radius = .05
+         angleStart = 0,
-     }, %)
+         angleEnd = 90,
-  |> xLine(endAbsolute = 0.0001)
+         radius = .05
-  |> close()
+       }, %)
-  |> revolve(
+    |> xLine(endAbsolute = 0.0001)
-    axis = "Y",
+    |> close()
-  )
+    |> revolve(axis = "Y")
-  |> appearance(color = '#D0FF01', metalness = 90, roughness = 50)
+    |> appearance(color = '#D0FF01', metalness = 90, roughness = 50)
 
   return knob
-
+}
-}

public/kcl-samples/walkie-talkie/main.kcl

@@ -5,14 +5,14 @@
 @settings(defaultLengthUnit = in)
 
 // import constants
-import * from 'globals.kcl'
+import * from "globals.kcl"
 
 // import parts and constants
-import body from 'body.kcl'
+import body from "body.kcl"
-import case from 'case.kcl'
+import case from "case.kcl"
-import antenna from 'antenna.kcl'
+import antenna from "antenna.kcl"
-import talkButton from 'talk-button.kcl'
+import talkButton from "talk-button.kcl"
-import knob from 'knob.kcl'
+import knob from "knob.kcl"
 import button from "button.kcl"
 
 // import the body
@@ -20,7 +20,7 @@ body()
 
 // import the antenna
 antenna()
-  |> translate(translate = [-width / 2 + .45, -0.10, height/2])
+  |> translate(translate = [-width / 2 + .45, -0.10, height / 2])
 
 // import the case
 case()
@@ -32,16 +32,52 @@ talkButton()
 
 // import the frequency knob
 knob()
-  |> translate(translate = [width / 2 - 0.70, -thickness / 2, height / 2])
+  |> translate(translate = [
+       width / 2 - 0.70,
+       -thickness / 2,
+       height / 2
+     ])
 
 // import the buttons
 button()
-  |> translate(translate = [-(screenWidth / 2 + tolerance), -1, screenYPosition])
+  |> translate(translate = [
+       -(screenWidth / 2 + tolerance),
+       -1,
+       screenYPosition
+     ])
 button()
-  |> translate(translate = [-(screenWidth / 2 + tolerance), -1, screenYPosition - buttonHeight - tolerance*2])
+  |> translate(translate = [
+       -(screenWidth / 2 + tolerance),
+       -1,
+       screenYPosition - buttonHeight - (tolerance * 2)
+     ])
 button()
-  |> rotate(%, roll = 0, pitch = 180, yaw = 0)
+  |> rotate(
-  |> translate(translate = [screenWidth / 2 + tolerance, -1, screenYPosition - buttonHeight], global = true)
+       %,
+       roll = 0,
+       pitch = 180,
+       yaw = 0,
+     )
+  |> translate(
+       translate = [
+         screenWidth / 2 + tolerance,
+         -1,
+         screenYPosition - buttonHeight
+       ],
+       global = true,
+     )
 button()
-  |> rotate(%, roll = 0, pitch = 180, yaw = 0)
+  |> rotate(
-  |> translate(translate = [screenWidth / 2 + tolerance, -1, screenYPosition - buttonHeight*2 - tolerance * 2], global = true)
+       %,
+       roll = 0,
+       pitch = 180,
+       yaw = 0,
+     )
+  |> translate(
+       translate = [
+         screenWidth / 2 + tolerance,
+         -1,
+         screenYPosition - (buttonHeight * 2) - (tolerance * 2)
+       ],
+       global = true,
+     )

public/kcl-samples/walkie-talkie/talk-button.kcl

@@ -1,6 +1,5 @@
 // Walkie talkie talk button
 
-
 // set units
 @settings(defaultLengthUnit = in)
 
@@ -8,9 +7,8 @@
 import width, thickness, talkButtonSideLength, talkButtonHeight from "globals.kcl"
 
 export fn talkButton() {
-
   // create the talk button sketch
-  talkButtonSketch = startSketchOn('YZ')
+  talkButtonSketch = startSketchOn(YZ)
     |> startProfileAt([
          -talkButtonSideLength / 2,
          talkButtonSideLength / 2
@@ -23,14 +21,14 @@ export fn talkButton() {
   // create the talk button and apply fillets
   talkButton = extrude(talkButtonSketch, length = talkButtonHeight)
     |> fillet(
-      radius = 0.050,
+         radius = 0.050,
-      tags = [
+         tags = [
-        getNextAdjacentEdge(tag1),
+           getNextAdjacentEdge(tag1),
-        getNextAdjacentEdge(tag2),
+           getNextAdjacentEdge(tag2),
-        getNextAdjacentEdge(tag3),
+           getNextAdjacentEdge(tag3),
-        getNextAdjacentEdge(tag4)
+           getNextAdjacentEdge(tag4)
-      ]
+         ],
-    )
+       )
     |> appearance(color = '#D0FF01', metalness = 90, roughness = 90)
 
   return talkButton

public/kcl-samples/walkie-talkie/zoo-logo.kcl

@@ -80,4 +80,4 @@ export fn oLogo2(surface, origin, scale) {
        }, %)
     |> close()
   return oSketch002
-}
+}

public/kcl-samples/washer/main.kcl

@@ -14,17 +14,11 @@ thicknessMin = 0.024
 fn washer(plane, innerDia, outerDia, thk) {
   // Define the sketch of the washer
   washerSketch = startSketchOn(plane)
-    |> circle(
+    |> circle(center = [0, 0], radius = outerDia / 2)
-         center = [0, 0],
+    |> hole(circle(center = [0, 0], radius = innerDia / 2), %)
-         radius = outerDia / 2
-       )
-    |> hole(circle(
-         center = [0, 0],
-         radius = innerDia / 2
-       ), %)
 
   washer = extrude(washerSketch, length = thk)
   return washer
 }
 
-washer('XY', innerDiameter, outerDiameter, thicknessMax)
+washer(XY, innerDiameter, outerDiameter, thicknessMax)

rust/kcl-lib/tests/kcl_samples/80-20-rail/artifact_graph_flowchart.snap.md

@@ -1,81 +1,81 @@
 ```mermaid
 flowchart LR
   subgraph path2 [Path]
-    2["Path<br>[326, 423, 0]"]
+    2["Path<br>[324, 421, 0]"]
-    3["Segment<br>[431, 536, 0]"]
+    3["Segment<br>[429, 534, 0]"]
-    4["Segment<br>[544, 653, 0]"]
+    4["Segment<br>[542, 651, 0]"]
-    5["Segment<br>[661, 693, 0]"]
+    5["Segment<br>[659, 691, 0]"]
-    6["Segment<br>[701, 810, 0]"]
+    6["Segment<br>[699, 808, 0]"]
-    7["Segment<br>[818, 865, 0]"]
+    7["Segment<br>[816, 863, 0]"]
-    8["Segment<br>[873, 921, 0]"]
+    8["Segment<br>[871, 919, 0]"]
-    9["Segment<br>[929, 978, 0]"]
+    9["Segment<br>[927, 976, 0]"]
-    10["Segment<br>[986, 1103, 0]"]
+    10["Segment<br>[984, 1101, 0]"]
-    11["Segment<br>[1111, 1159, 0]"]
+    11["Segment<br>[1109, 1157, 0]"]
-    12["Segment<br>[1167, 1275, 0]"]
+    12["Segment<br>[1165, 1273, 0]"]
-    13["Segment<br>[1283, 1332, 0]"]
+    13["Segment<br>[1281, 1330, 0]"]
-    14["Segment<br>[1340, 1389, 0]"]
+    14["Segment<br>[1338, 1387, 0]"]
-    15["Segment<br>[1397, 1430, 0]"]
+    15["Segment<br>[1395, 1428, 0]"]
-    16["Segment<br>[1438, 1547, 0]"]
+    16["Segment<br>[1436, 1545, 0]"]
-    17["Segment<br>[1555, 1587, 0]"]
+    17["Segment<br>[1553, 1585, 0]"]
-    18["Segment<br>[1595, 1704, 0]"]
+    18["Segment<br>[1593, 1702, 0]"]
-    19["Segment<br>[1712, 1815, 0]"]
+    19["Segment<br>[1710, 1813, 0]"]
-    20["Segment<br>[1856, 1966, 0]"]
+    20["Segment<br>[1854, 1964, 0]"]
-    21["Segment<br>[1974, 2006, 0]"]
+    21["Segment<br>[1972, 2004, 0]"]
-    22["Segment<br>[2014, 2124, 0]"]
+    22["Segment<br>[2012, 2122, 0]"]
-    23["Segment<br>[2132, 2179, 0]"]
+    23["Segment<br>[2130, 2177, 0]"]
-    24["Segment<br>[2187, 2237, 0]"]
+    24["Segment<br>[2185, 2235, 0]"]
-    25["Segment<br>[2245, 2295, 0]"]
+    25["Segment<br>[2243, 2293, 0]"]
-    26["Segment<br>[2313, 2442, 0]"]
+    26["Segment<br>[2311, 2440, 0]"]
-    27["Segment<br>[2460, 2509, 0]"]
+    27["Segment<br>[2458, 2507, 0]"]
-    28["Segment<br>[2523, 2637, 0]"]
+    28["Segment<br>[2521, 2635, 0]"]
-    29["Segment<br>[2651, 2701, 0]"]
+    29["Segment<br>[2649, 2699, 0]"]
-    30["Segment<br>[2715, 2764, 0]"]
+    30["Segment<br>[2713, 2762, 0]"]
-    31["Segment<br>[2772, 2805, 0]"]
+    31["Segment<br>[2770, 2803, 0]"]
-    32["Segment<br>[2813, 2923, 0]"]
+    32["Segment<br>[2811, 2921, 0]"]
-    33["Segment<br>[2931, 2963, 0]"]
+    33["Segment<br>[2929, 2961, 0]"]
-    34["Segment<br>[2971, 3081, 0]"]
+    34["Segment<br>[2969, 3079, 0]"]
-    35["Segment<br>[3122, 3224, 0]"]
+    35["Segment<br>[3120, 3222, 0]"]
-    36["Segment<br>[3232, 3342, 0]"]
+    36["Segment<br>[3230, 3340, 0]"]
-    37["Segment<br>[3350, 3383, 0]"]
+    37["Segment<br>[3348, 3381, 0]"]
-    38["Segment<br>[3391, 3501, 0]"]
+    38["Segment<br>[3389, 3499, 0]"]
-    39["Segment<br>[3509, 3558, 0]"]
+    39["Segment<br>[3507, 3556, 0]"]
-    40["Segment<br>[3566, 3616, 0]"]
+    40["Segment<br>[3564, 3614, 0]"]
-    41["Segment<br>[3624, 3673, 0]"]
+    41["Segment<br>[3622, 3671, 0]"]
-    42["Segment<br>[3681, 3809, 0]"]
+    42["Segment<br>[3679, 3807, 0]"]
-    43["Segment<br>[3817, 3867, 0]"]
+    43["Segment<br>[3815, 3865, 0]"]
-    44["Segment<br>[3875, 3990, 0]"]
+    44["Segment<br>[3873, 3988, 0]"]
-    45["Segment<br>[3998, 4047, 0]"]
+    45["Segment<br>[3996, 4045, 0]"]
-    46["Segment<br>[4055, 4104, 0]"]
+    46["Segment<br>[4053, 4102, 0]"]
-    47["Segment<br>[4112, 4146, 0]"]
+    47["Segment<br>[4110, 4144, 0]"]
-    48["Segment<br>[4154, 4264, 0]"]
+    48["Segment<br>[4152, 4262, 0]"]
-    49["Segment<br>[4272, 4305, 0]"]
+    49["Segment<br>[4270, 4303, 0]"]
-    50["Segment<br>[4313, 4423, 0]"]
+    50["Segment<br>[4311, 4421, 0]"]
-    51["Segment<br>[4431, 4535, 0]"]
+    51["Segment<br>[4429, 4533, 0]"]
-    52["Segment<br>[4576, 4686, 0]"]
+    52["Segment<br>[4574, 4684, 0]"]
-    53["Segment<br>[4694, 4727, 0]"]
+    53["Segment<br>[4692, 4725, 0]"]
-    54["Segment<br>[4735, 4845, 0]"]
+    54["Segment<br>[4733, 4843, 0]"]
-    55["Segment<br>[4853, 4902, 0]"]
+    55["Segment<br>[4851, 4900, 0]"]
-    56["Segment<br>[4910, 4959, 0]"]
+    56["Segment<br>[4908, 4957, 0]"]
-    57["Segment<br>[4967, 5016, 0]"]
+    57["Segment<br>[4965, 5014, 0]"]
-    58["Segment<br>[5024, 5143, 0]"]
+    58["Segment<br>[5022, 5141, 0]"]
-    59["Segment<br>[5151, 5201, 0]"]
+    59["Segment<br>[5149, 5199, 0]"]
-    60["Segment<br>[5209, 5317, 0]"]
+    60["Segment<br>[5207, 5315, 0]"]
-    61["Segment<br>[5325, 5374, 0]"]
+    61["Segment<br>[5323, 5372, 0]"]
-    62["Segment<br>[5382, 5432, 0]"]
+    62["Segment<br>[5380, 5430, 0]"]
-    63["Segment<br>[5440, 5474, 0]"]
+    63["Segment<br>[5438, 5472, 0]"]
-    64["Segment<br>[5482, 5592, 0]"]
+    64["Segment<br>[5480, 5590, 0]"]
-    65["Segment<br>[5600, 5633, 0]"]
+    65["Segment<br>[5598, 5631, 0]"]
-    66["Segment<br>[5641, 5751, 0]"]
+    66["Segment<br>[5639, 5749, 0]"]
-    67["Segment<br>[5759, 5766, 0]"]
+    67["Segment<br>[5757, 5764, 0]"]
     68[Solid2d]
   end
   subgraph path69 [Path]
-    69["Path<br>[5817, 5994, 0]"]
+    69["Path<br>[5815, 5993, 0]"]
-    70["Segment<br>[5817, 5994, 0]"]
+    70["Segment<br>[5815, 5993, 0]"]
     71[Solid2d]
   end
-  1["Plane<br>[298, 318, 0]"]
+  1["Plane<br>[298, 316, 0]"]
-  72["Sweep Extrusion<br>[6006, 6034, 0]"]
+  72["Sweep Extrusion<br>[6005, 6033, 0]"]
   73[Wall]
   74[Wall]
   75[Wall]
@@ -270,38 +270,38 @@ flowchart LR
   264["SweepEdge Adjacent"]
   265["SweepEdge Opposite"]
   266["SweepEdge Adjacent"]
-  267["EdgeCut Fillet<br>[6042, 6746, 0]"]
+  267["EdgeCut Fillet<br>[6041, 6746, 0]"]
-  268["EdgeCut Fillet<br>[6042, 6746, 0]"]
+  268["EdgeCut Fillet<br>[6041, 6746, 0]"]
-  269["EdgeCut Fillet<br>[6042, 6746, 0]"]
+  269["EdgeCut Fillet<br>[6041, 6746, 0]"]
-  270["EdgeCut Fillet<br>[6042, 6746, 0]"]
+  270["EdgeCut Fillet<br>[6041, 6746, 0]"]
-  271["EdgeCut Fillet<br>[6042, 6746, 0]"]
+  271["EdgeCut Fillet<br>[6041, 6746, 0]"]
-  272["EdgeCut Fillet<br>[6042, 6746, 0]"]
+  272["EdgeCut Fillet<br>[6041, 6746, 0]"]
-  273["EdgeCut Fillet<br>[6042, 6746, 0]"]
+  273["EdgeCut Fillet<br>[6041, 6746, 0]"]
-  274["EdgeCut Fillet<br>[6042, 6746, 0]"]
+  274["EdgeCut Fillet<br>[6041, 6746, 0]"]
-  275["EdgeCut Fillet<br>[6042, 6746, 0]"]
+  275["EdgeCut Fillet<br>[6041, 6746, 0]"]
-  276["EdgeCut Fillet<br>[6042, 6746, 0]"]
+  276["EdgeCut Fillet<br>[6041, 6746, 0]"]
-  277["EdgeCut Fillet<br>[6042, 6746, 0]"]
+  277["EdgeCut Fillet<br>[6041, 6746, 0]"]
-  278["EdgeCut Fillet<br>[6042, 6746, 0]"]
+  278["EdgeCut Fillet<br>[6041, 6746, 0]"]
-  279["EdgeCut Fillet<br>[6042, 6746, 0]"]
+  279["EdgeCut Fillet<br>[6041, 6746, 0]"]
-  280["EdgeCut Fillet<br>[6042, 6746, 0]"]
+  280["EdgeCut Fillet<br>[6041, 6746, 0]"]
-  281["EdgeCut Fillet<br>[6042, 6746, 0]"]
+  281["EdgeCut Fillet<br>[6041, 6746, 0]"]
-  282["EdgeCut Fillet<br>[6042, 6746, 0]"]
+  282["EdgeCut Fillet<br>[6041, 6746, 0]"]
-  283["EdgeCut Fillet<br>[6754, 7457, 0]"]
+  283["EdgeCut Fillet<br>[6754, 7458, 0]"]
-  284["EdgeCut Fillet<br>[6754, 7457, 0]"]
+  284["EdgeCut Fillet<br>[6754, 7458, 0]"]
-  285["EdgeCut Fillet<br>[6754, 7457, 0]"]
+  285["EdgeCut Fillet<br>[6754, 7458, 0]"]
-  286["EdgeCut Fillet<br>[6754, 7457, 0]"]
+  286["EdgeCut Fillet<br>[6754, 7458, 0]"]
-  287["EdgeCut Fillet<br>[6754, 7457, 0]"]
+  287["EdgeCut Fillet<br>[6754, 7458, 0]"]
-  288["EdgeCut Fillet<br>[6754, 7457, 0]"]
+  288["EdgeCut Fillet<br>[6754, 7458, 0]"]
-  289["EdgeCut Fillet<br>[6754, 7457, 0]"]
+  289["EdgeCut Fillet<br>[6754, 7458, 0]"]
-  290["EdgeCut Fillet<br>[6754, 7457, 0]"]
+  290["EdgeCut Fillet<br>[6754, 7458, 0]"]
-  291["EdgeCut Fillet<br>[6754, 7457, 0]"]
+  291["EdgeCut Fillet<br>[6754, 7458, 0]"]
-  292["EdgeCut Fillet<br>[6754, 7457, 0]"]
+  292["EdgeCut Fillet<br>[6754, 7458, 0]"]
-  293["EdgeCut Fillet<br>[6754, 7457, 0]"]
+  293["EdgeCut Fillet<br>[6754, 7458, 0]"]
-  294["EdgeCut Fillet<br>[6754, 7457, 0]"]
+  294["EdgeCut Fillet<br>[6754, 7458, 0]"]
-  295["EdgeCut Fillet<br>[6754, 7457, 0]"]
+  295["EdgeCut Fillet<br>[6754, 7458, 0]"]
-  296["EdgeCut Fillet<br>[6754, 7457, 0]"]
+  296["EdgeCut Fillet<br>[6754, 7458, 0]"]
-  297["EdgeCut Fillet<br>[6754, 7457, 0]"]
+  297["EdgeCut Fillet<br>[6754, 7458, 0]"]
-  298["EdgeCut Fillet<br>[6754, 7457, 0]"]
+  298["EdgeCut Fillet<br>[6754, 7458, 0]"]
   1 --- 2
   1 --- 69
   2 --- 3

rust/kcl-lib/tests/kcl_samples/80-20-rail/ops.snap

@@ -8,7 +8,7 @@ description: Operations executed 80-20-rail.kcl
     "name": "rail8020",
     "functionSourceRange": [
       214,
-      7478,
+      7479,
       0
     ],
     "unlabeledArg": null,
@@ -19,8 +19,8 @@ description: Operations executed 80-20-rail.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
+          "type": "Plane",
-          "value": "-XZ"
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }

rust/kcl-lib/tests/kcl_samples/a-parametric-bearing-pillow-block/artifact_graph_flowchart.snap.md

@@ -1,30 +1,30 @@
 ```mermaid
 flowchart LR
   subgraph path2 [Path]
-    2["Path<br>[971, 1015, 0]"]
+    2["Path<br>[969, 1013, 0]"]
-    3["Segment<br>[1021, 1065, 0]"]
+    3["Segment<br>[1019, 1063, 0]"]
-    4["Segment<br>[1071, 1114, 0]"]
+    4["Segment<br>[1069, 1112, 0]"]
-    5["Segment<br>[1120, 1164, 0]"]
+    5["Segment<br>[1118, 1162, 0]"]
-    6["Segment<br>[1170, 1177, 0]"]
+    6["Segment<br>[1168, 1175, 0]"]
     7[Solid2d]
   end
   subgraph path23 [Path]
-    23["Path<br>[1262, 1406, 0]"]
+    23["Path<br>[1257, 1404, 0]"]
-    24["Segment<br>[1262, 1406, 0]"]
+    24["Segment<br>[1257, 1404, 0]"]
     25[Solid2d]
   end
   subgraph path34 [Path]
-    34["Path<br>[1706, 1862, 0]"]
+    34["Path<br>[1653, 1802, 0]"]
-    35["Segment<br>[1706, 1862, 0]"]
+    35["Segment<br>[1653, 1802, 0]"]
     36[Solid2d]
   end
   subgraph path44 [Path]
-    44["Path<br>[2165, 2230, 0]"]
+    44["Path<br>[2055, 2103, 0]"]
-    45["Segment<br>[2165, 2230, 0]"]
+    45["Segment<br>[2055, 2103, 0]"]
     46[Solid2d]
   end
-  1["Plane<br>[946, 965, 0]"]
+  1["Plane<br>[946, 963, 0]"]
-  8["Sweep Extrusion<br>[1183, 1207, 0]"]
+  8["Sweep Extrusion<br>[1181, 1205, 0]"]
   9[Wall]
   10[Wall]
   11[Wall]
@@ -39,28 +39,28 @@ flowchart LR
   20["SweepEdge Adjacent"]
   21["SweepEdge Opposite"]
   22["SweepEdge Adjacent"]
-  26["Sweep Extrusion<br>[1622, 1651, 0]"]
+  26["Sweep Extrusion<br>[1569, 1598, 0]"]
   27[Wall]
   28["Cap Start"]
   29["SweepEdge Opposite"]
   30["SweepEdge Adjacent"]
-  31["Sweep Extrusion<br>[1622, 1651, 0]"]
+  31["Sweep Extrusion<br>[1569, 1598, 0]"]
-  32["Sweep Extrusion<br>[1622, 1651, 0]"]
+  32["Sweep Extrusion<br>[1569, 1598, 0]"]
-  33["Sweep Extrusion<br>[1622, 1651, 0]"]
+  33["Sweep Extrusion<br>[1569, 1598, 0]"]
-  37["Sweep Extrusion<br>[2077, 2112, 0]"]
+  37["Sweep Extrusion<br>[1967, 2002, 0]"]
   38[Wall]
   39["SweepEdge Opposite"]
   40["SweepEdge Adjacent"]
-  41["Sweep Extrusion<br>[2077, 2112, 0]"]
+  41["Sweep Extrusion<br>[1967, 2002, 0]"]
-  42["Sweep Extrusion<br>[2077, 2112, 0]"]
+  42["Sweep Extrusion<br>[1967, 2002, 0]"]
-  43["Sweep Extrusion<br>[2077, 2112, 0]"]
+  43["Sweep Extrusion<br>[1967, 2002, 0]"]
-  47["Sweep Extrusion<br>[2236, 2261, 0]"]
+  47["Sweep Extrusion<br>[2109, 2134, 0]"]
   48[Wall]
   49["SweepEdge Opposite"]
   50["SweepEdge Adjacent"]
-  51["StartSketchOnFace<br>[1224, 1256, 0]"]
+  51["StartSketchOnFace<br>[1219, 1251, 0]"]
-  52["StartSketchOnFace<br>[1666, 1700, 0]"]
+  52["StartSketchOnFace<br>[1613, 1647, 0]"]
-  53["StartSketchOnFace<br>[2127, 2159, 0]"]
+  53["StartSketchOnFace<br>[2017, 2049, 0]"]
   1 --- 2
   2 --- 3
   2 --- 4

rust/kcl-lib/tests/kcl_samples/a-parametric-bearing-pillow-block/ops.snap

@@ -7,8 +7,8 @@ description: Operations executed a-parametric-bearing-pillow-block.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
+          "type": "Plane",
-          "value": "XY"
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }

rust/kcl-lib/tests/kcl_samples/ball-bearing/artifact_graph_flowchart.snap.md

@@ -1,58 +1,58 @@
 ```mermaid
 flowchart LR
   subgraph path2 [Path]
-    2["Path<br>[733, 816, 0]"]
+    2["Path<br>[731, 793, 0]"]
-    3["Segment<br>[733, 816, 0]"]
+    3["Segment<br>[731, 793, 0]"]
     4[Solid2d]
   end
   subgraph path5 [Path]
-    5["Path<br>[827, 894, 0]"]
+    5["Path<br>[804, 850, 0]"]
-    6["Segment<br>[827, 894, 0]"]
+    6["Segment<br>[804, 850, 0]"]
     7[Solid2d]
   end
   subgraph path15 [Path]
-    15["Path<br>[1083, 1139, 0]"]
+    15["Path<br>[1037, 1093, 0]"]
-    16["Segment<br>[1145, 1237, 0]"]
+    16["Segment<br>[1099, 1191, 0]"]
-    17["Segment<br>[1243, 1250, 0]"]
+    17["Segment<br>[1197, 1204, 0]"]
     18[Solid2d]
   end
   subgraph path24 [Path]
-    24["Path<br>[1623, 1756, 0]"]
+    24["Path<br>[1576, 1709, 0]"]
-    25["Segment<br>[1762, 1855, 0]"]
+    25["Segment<br>[1715, 1808, 0]"]
-    26["Segment<br>[1861, 1892, 0]"]
+    26["Segment<br>[1814, 1845, 0]"]
-    27["Segment<br>[1898, 1926, 0]"]
+    27["Segment<br>[1851, 1879, 0]"]
-    28["Segment<br>[1932, 1939, 0]"]
+    28["Segment<br>[1885, 1892, 0]"]
     29[Solid2d]
   end
   subgraph path40 [Path]
-    40["Path<br>[2276, 2417, 0]"]
+    40["Path<br>[2228, 2370, 0]"]
-    41["Segment<br>[2276, 2417, 0]"]
+    41["Segment<br>[2228, 2370, 0]"]
     42[Solid2d]
   end
   subgraph path50 [Path]
-    50["Path<br>[2814, 2888, 0]"]
+    50["Path<br>[2766, 2819, 0]"]
-    51["Segment<br>[2814, 2888, 0]"]
+    51["Segment<br>[2766, 2819, 0]"]
     52[Solid2d]
   end
   subgraph path53 [Path]
-    53["Path<br>[2899, 2994, 0]"]
+    53["Path<br>[2830, 2904, 0]"]
-    54["Segment<br>[2899, 2994, 0]"]
+    54["Segment<br>[2830, 2904, 0]"]
     55[Solid2d]
   end
-  1["Plane<br>[677, 726, 0]"]
+  1["Plane<br>[677, 724, 0]"]
-  8["Sweep Extrusion<br>[949, 1001, 0]"]
+  8["Sweep Extrusion<br>[905, 957, 0]"]
   9[Wall]
   10["Cap Start"]
   11["Cap End"]
   12["SweepEdge Opposite"]
   13["SweepEdge Adjacent"]
-  14["Plane<br>[1058, 1077, 0]"]
+  14["Plane<br>[1014, 1031, 0]"]
-  19["Sweep Revolve<br>[1332, 1364, 0]"]
+  19["Sweep Revolve<br>[1286, 1318, 0]"]
   20[Wall]
   21[Wall]
   22["SweepEdge Adjacent"]
-  23["Plane<br>[1598, 1617, 0]"]
+  23["Plane<br>[1553, 1570, 0]"]
-  30["Sweep Revolve<br>[1981, 2013, 0]"]
+  30["Sweep Revolve<br>[1934, 1966, 0]"]
   31[Wall]
   32[Wall]
   33[Wall]
@@ -61,22 +61,22 @@ flowchart LR
   36["SweepEdge Adjacent"]
   37["SweepEdge Adjacent"]
   38["SweepEdge Adjacent"]
-  39["Plane<br>[2251, 2270, 0]"]
+  39["Plane<br>[2205, 2222, 0]"]
-  43["Sweep Revolve<br>[2460, 2513, 0]"]
+  43["Sweep Revolve<br>[2413, 2466, 0]"]
   44[Wall]
   45["Cap Start"]
   46["Cap End"]
   47["SweepEdge Opposite"]
   48["SweepEdge Adjacent"]
-  49["Plane<br>[2758, 2807, 0]"]
+  49["Plane<br>[2712, 2759, 0]"]
-  56["Sweep Extrusion<br>[3014, 3067, 0]"]
+  56["Sweep Extrusion<br>[2924, 2977, 0]"]
   57[Wall]
   58["Cap Start"]
   59["Cap End"]
   60["SweepEdge Opposite"]
   61["SweepEdge Adjacent"]
-  62["StartSketchOnPlane<br>[663, 727, 0]"]
+  62["StartSketchOnPlane<br>[663, 725, 0]"]
-  63["StartSketchOnPlane<br>[2744, 2808, 0]"]
+  63["StartSketchOnPlane<br>[2698, 2760, 0]"]
   1 --- 2
   1 --- 5
   2 --- 3

rust/kcl-lib/tests/kcl_samples/ball-bearing/ops.snap

@@ -21,8 +21,8 @@ description: Operations executed ball-bearing.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "XY"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }
@@ -224,8 +224,8 @@ description: Operations executed ball-bearing.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
+          "type": "Plane",
-          "value": "XY"
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }
@@ -411,8 +411,8 @@ description: Operations executed ball-bearing.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
+          "type": "Plane",
-          "value": "XY"
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }
@@ -613,8 +613,8 @@ description: Operations executed ball-bearing.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
+          "type": "Plane",
-          "value": "XZ"
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }
@@ -878,8 +878,8 @@ description: Operations executed ball-bearing.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "XY"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }

rust/kcl-lib/tests/kcl_samples/bench/artifact_commands.snap

@@ -1853,8 +1853,8 @@ description: Artifact commands bench.kcl
       "adjust_camera": false,
       "planar_normal": {
         "x": -1.0,
-        "y": 0.0,
+        "y": -0.0,
-        "z": 0.0
+        "z": -0.0
       }
     }
   },
@@ -2244,8 +2244,8 @@ description: Artifact commands bench.kcl
       "adjust_camera": false,
       "planar_normal": {
         "x": -1.0,
-        "y": 0.0,
+        "y": -0.0,
-        "z": 0.0
+        "z": -0.0
       }
     }
   },
@@ -2694,8 +2694,8 @@ description: Artifact commands bench.kcl
       "adjust_camera": false,
       "planar_normal": {
         "x": -1.0,
-        "y": 0.0,
+        "y": -0.0,
-        "z": 0.0
+        "z": -0.0
       }
     }
   },
@@ -3085,8 +3085,8 @@ description: Artifact commands bench.kcl
       "adjust_camera": false,
       "planar_normal": {
         "x": -1.0,
-        "y": 0.0,
+        "y": -0.0,
-        "z": 0.0
+        "z": -0.0
       }
     }
   },
@@ -7461,8 +7461,8 @@ description: Artifact commands bench.kcl
       "adjust_camera": false,
       "planar_normal": {
         "x": -1.0,
-        "y": 0.0,
+        "y": -0.0,
-        "z": 0.0
+        "z": -0.0
       }
     }
   },
@@ -7546,7 +7546,7 @@ description: Artifact commands bench.kcl
         "z": 0.0
       },
       "x_axis": {
-        "x": -1.0,
+        "x": 1.0,
         "y": 0.0,
         "z": 0.0
       },
@@ -7584,9 +7584,9 @@ description: Artifact commands bench.kcl
       "animated": false,
       "adjust_camera": false,
       "planar_normal": {
-        "x": 0.0,
+        "x": -0.0,
         "y": 1.0,
-        "z": 0.0
+        "z": -0.0
       }
     }
   },
@@ -7945,8 +7945,8 @@ description: Artifact commands bench.kcl
       "adjust_camera": false,
       "planar_normal": {
         "x": -1.0,
-        "y": 0.0,
+        "y": -0.0,
-        "z": 0.0
+        "z": -0.0
       }
     }
   },
@@ -8030,7 +8030,7 @@ description: Artifact commands bench.kcl
         "z": 0.0
       },
       "x_axis": {
-        "x": -1.0,
+        "x": 1.0,
         "y": 0.0,
         "z": 0.0
       },
@@ -8068,9 +8068,9 @@ description: Artifact commands bench.kcl
       "animated": false,
       "adjust_camera": false,
       "planar_normal": {
-        "x": 0.0,
+        "x": -0.0,
         "y": 1.0,
-        "z": 0.0
+        "z": -0.0
       }
     }
   },

rust/kcl-lib/tests/kcl_samples/bench/artifact_graph_flowchart.snap.md

@@ -360,7 +360,7 @@ flowchart LR
   172["SweepEdge Adjacent"]
   173["SweepEdge Opposite"]
   174["SweepEdge Adjacent"]
-  175["Plane<br>[825, 869, 0]"]
+  175["Plane<br>[823, 865, 0]"]
   199["Sweep Extrusion<br>[1379, 1417, 4]"]
   200[Wall]
   201[Wall]
@@ -487,7 +487,7 @@ flowchart LR
   345["SweepEdge Adjacent"]
   346["SweepEdge Opposite"]
   347["SweepEdge Adjacent"]
-  348["Plane<br>[879, 922, 0]"]
+  348["Plane<br>[875, 916, 0]"]
   372["Sweep Extrusion<br>[1379, 1417, 4]"]
   373[Wall]
   374[Wall]
@@ -614,7 +614,7 @@ flowchart LR
   518["SweepEdge Adjacent"]
   519["SweepEdge Opposite"]
   520["SweepEdge Adjacent"]
-  521["Plane<br>[981, 1025, 0]"]
+  521["Plane<br>[975, 1017, 0]"]
   532["Sweep Extrusion<br>[1949, 1973, 4]"]
   533[Wall]
   534[Wall]
@@ -657,7 +657,7 @@ flowchart LR
   581["SweepEdge Adjacent"]
   582["SweepEdge Opposite"]
   583["SweepEdge Adjacent"]
-  584["Plane<br>[1076, 1143, 0]"]
+  584["Plane<br>[1068, 1135, 0]"]
   594["Sweep Extrusion<br>[2523, 2547, 4]"]
   595[Wall]
   596[Wall]
@@ -681,7 +681,7 @@ flowchart LR
   614["SweepEdge Adjacent"]
   615["Sweep Extrusion<br>[2523, 2547, 4]"]
   616["Sweep Extrusion<br>[2523, 2547, 4]"]
-  617["Plane<br>[1213, 1280, 0]"]
+  617["Plane<br>[1205, 1272, 0]"]
   627["Sweep Extrusion<br>[3047, 3071, 4]"]
   628[Wall]
   629[Wall]
@@ -705,8 +705,8 @@ flowchart LR
   647["SweepEdge Adjacent"]
   648["Sweep Extrusion<br>[3047, 3071, 4]"]
   649["Plane<br>[3712, 3747, 4]"]
-  653["Plane<br>[3778, 3809, 4]"]
+  653["Plane<br>[3778, 3807, 4]"]
-  663["Sweep Sweep<br>[3821, 3848, 4]"]
+  663["Sweep Sweep<br>[3819, 3846, 4]"]
   664[Wall]
   665[Wall]
   666[Wall]
@@ -731,8 +731,8 @@ flowchart LR
   685["SweepEdge Opposite"]
   686["SweepEdge Adjacent"]
   687["Plane<br>[3712, 3747, 4]"]
-  691["Plane<br>[3778, 3809, 4]"]
+  691["Plane<br>[3778, 3807, 4]"]
-  701["Sweep Sweep<br>[3821, 3848, 4]"]
+  701["Sweep Sweep<br>[3819, 3846, 4]"]
   702[Wall]
   703[Wall]
   704[Wall]

rust/kcl-lib/tests/kcl_samples/bench/ast.snap

@@ -232,13 +232,20 @@ description: Result of parsing bench.kcl
         "expression": {
           "arguments": [
             {
+              "abs_path": false,
               "commentStart": 811,
               "end": 0,
-              "raw": "\"YZ\"",
+              "name": {
+                "commentStart": 811,
+                "end": 0,
+                "name": "YZ",
+                "start": 0,
+                "type": "Identifier"
+              },
+              "path": [],
               "start": 0,
-              "type": "Literal",
+              "type": "Name",
-              "type": "Literal",
+              "type": "Name"
-              "value": "YZ"
             }
           ],
           "callee": {
@@ -272,7 +279,7 @@ description: Result of parsing bench.kcl
         "type": "ExpressionStatement"
       },
       {
-        "commentStart": 817,
+        "commentStart": 815,
         "end": 0,
         "expression": {
           "arguments": [
@@ -281,21 +288,21 @@ description: Result of parsing bench.kcl
                 {
                   "type": "LabeledArg",
                   "label": {
-                    "commentStart": 844,
+                    "commentStart": 840,
                     "end": 0,
                     "name": "offset",
                     "start": 0,
                     "type": "Identifier"
                   },
                   "arg": {
-                    "commentStart": 853,
+                    "commentStart": 849,
                     "end": 0,
                     "left": {
                       "abs_path": false,
-                      "commentStart": 853,
+                      "commentStart": 849,
                       "end": 0,
                       "name": {
-                        "commentStart": 853,
+                        "commentStart": 849,
                         "end": 0,
                         "name": "benchLength",
                         "start": 0,
@@ -308,7 +315,7 @@ description: Result of parsing bench.kcl
                     },
                     "operator": "/",
                     "right": {
-                      "commentStart": 867,
+                      "commentStart": 863,
                       "end": 0,
                       "raw": "2",
                       "start": 0,
@@ -327,10 +334,10 @@ description: Result of parsing bench.kcl
               ],
               "callee": {
                 "abs_path": false,
-                "commentStart": 825,
+                "commentStart": 823,
                 "end": 0,
                 "name": {
-                  "commentStart": 825,
+                  "commentStart": 823,
                   "end": 0,
                   "name": "offsetPlane",
                   "start": 0,
@@ -340,28 +347,43 @@ description: Result of parsing bench.kcl
                 "start": 0,
                 "type": "Name"
               },
-              "commentStart": 825,
+              "commentStart": 823,
               "end": 0,
               "start": 0,
               "type": "CallExpressionKw",
               "type": "CallExpressionKw",
               "unlabeled": {
-                "commentStart": 837,
+                "argument": {
+                  "abs_path": false,
+                  "commentStart": 836,
+                  "end": 0,
+                  "name": {
+                    "commentStart": 836,
+                    "end": 0,
+                    "name": "YZ",
+                    "start": 0,
+                    "type": "Identifier"
+                  },
+                  "path": [],
+                  "start": 0,
+                  "type": "Name",
+                  "type": "Name"
+                },
+                "commentStart": 835,
                 "end": 0,
-                "raw": "\"-YZ\"",
+                "operator": "-",
                 "start": 0,
-                "type": "Literal",
+                "type": "UnaryExpression",
-                "type": "Literal",
+                "type": "UnaryExpression"
-                "value": "-YZ"
               }
             }
           ],
           "callee": {
             "abs_path": false,
-            "commentStart": 817,
+            "commentStart": 815,
             "end": 0,
             "name": {
-              "commentStart": 817,
+              "commentStart": 815,
               "end": 0,
               "name": "divider",
               "start": 0,
@@ -371,7 +393,7 @@ description: Result of parsing bench.kcl
             "start": 0,
             "type": "Name"
           },
-          "commentStart": 817,
+          "commentStart": 815,
           "end": 0,
           "start": 0,
           "type": "CallExpression",
@@ -382,7 +404,7 @@ description: Result of parsing bench.kcl
         "type": "ExpressionStatement"
       },
       {
-        "commentStart": 871,
+        "commentStart": 867,
         "end": 0,
         "expression": {
           "arguments": [
@@ -391,21 +413,21 @@ description: Result of parsing bench.kcl
                 {
                   "type": "LabeledArg",
                   "label": {
-                    "commentStart": 897,
+                    "commentStart": 891,
                     "end": 0,
                     "name": "offset",
                     "start": 0,
                     "type": "Identifier"
                   },
                   "arg": {
-                    "commentStart": 906,
+                    "commentStart": 900,
                     "end": 0,
                     "left": {
                       "abs_path": false,
-                      "commentStart": 906,
+                      "commentStart": 900,
                       "end": 0,
                       "name": {
-                        "commentStart": 906,
+                        "commentStart": 900,
                         "end": 0,
                         "name": "benchLength",
                         "start": 0,
@@ -418,7 +440,7 @@ description: Result of parsing bench.kcl
                     },
                     "operator": "/",
                     "right": {
-                      "commentStart": 920,
+                      "commentStart": 914,
                       "end": 0,
                       "raw": "2",
                       "start": 0,
@@ -437,10 +459,10 @@ description: Result of parsing bench.kcl
               ],
               "callee": {
                 "abs_path": false,
-                "commentStart": 879,
+                "commentStart": 875,
                 "end": 0,
                 "name": {
-                  "commentStart": 879,
+                  "commentStart": 875,
                   "end": 0,
                   "name": "offsetPlane",
                   "start": 0,
@@ -450,28 +472,35 @@ description: Result of parsing bench.kcl
                 "start": 0,
                 "type": "Name"
               },
-              "commentStart": 879,
+              "commentStart": 875,
               "end": 0,
               "start": 0,
               "type": "CallExpressionKw",
               "type": "CallExpressionKw",
               "unlabeled": {
-                "commentStart": 891,
+                "abs_path": false,
+                "commentStart": 887,
                 "end": 0,
-                "raw": "\"YZ\"",
+                "name": {
+                  "commentStart": 887,
+                  "end": 0,
+                  "name": "YZ",
+                  "start": 0,
+                  "type": "Identifier"
+                },
+                "path": [],
                 "start": 0,
-                "type": "Literal",
+                "type": "Name",
-                "type": "Literal",
+                "type": "Name"
-                "value": "YZ"
               }
             }
           ],
           "callee": {
             "abs_path": false,
-            "commentStart": 871,
+            "commentStart": 867,
             "end": 0,
             "name": {
-              "commentStart": 871,
+              "commentStart": 867,
               "end": 0,
               "name": "divider",
               "start": 0,
@@ -481,7 +510,7 @@ description: Result of parsing bench.kcl
             "start": 0,
             "type": "Name"
           },
-          "commentStart": 871,
+          "commentStart": 867,
           "end": 0,
           "start": 0,
           "type": "CallExpression",
@@ -492,7 +521,7 @@ description: Result of parsing bench.kcl
         "type": "ExpressionStatement"
       },
       {
-        "commentStart": 923,
+        "commentStart": 917,
         "end": 0,
         "expression": {
           "arguments": [
@@ -501,22 +530,22 @@ description: Result of parsing bench.kcl
                 {
                   "type": "LabeledArg",
                   "label": {
-                    "commentStart": 999,
+                    "commentStart": 991,
                     "end": 0,
                     "name": "offset",
                     "start": 0,
                     "type": "Identifier"
                   },
                   "arg": {
-                    "commentStart": 1008,
+                    "commentStart": 1000,
                     "end": 0,
                     "left": {
                       "argument": {
                         "abs_path": false,
-                        "commentStart": 1009,
+                        "commentStart": 1001,
                         "end": 0,
                         "name": {
-                          "commentStart": 1009,
+                          "commentStart": 1001,
                           "end": 0,
                           "name": "benchLength",
                           "start": 0,
@@ -527,7 +556,7 @@ description: Result of parsing bench.kcl
                         "type": "Name",
                         "type": "Name"
                       },
-                      "commentStart": 1008,
+                      "commentStart": 1000,
                       "end": 0,
                       "operator": "-",
                       "start": 0,
@@ -536,7 +565,7 @@ description: Result of parsing bench.kcl
                     },
                     "operator": "/",
                     "right": {
-                      "commentStart": 1023,
+                      "commentStart": 1015,
                       "end": 0,
                       "raw": "2",
                       "start": 0,
@@ -555,10 +584,10 @@ description: Result of parsing bench.kcl
               ],
               "callee": {
                 "abs_path": false,
-                "commentStart": 981,
+                "commentStart": 975,
                 "end": 0,
                 "name": {
-                  "commentStart": 981,
+                  "commentStart": 975,
                   "end": 0,
                   "name": "offsetPlane",
                   "start": 0,
@@ -568,27 +597,34 @@ description: Result of parsing bench.kcl
                 "start": 0,
                 "type": "Name"
               },
-              "commentStart": 981,
+              "commentStart": 975,
               "end": 0,
               "start": 0,
               "type": "CallExpressionKw",
               "type": "CallExpressionKw",
               "unlabeled": {
-                "commentStart": 993,
+                "abs_path": false,
+                "commentStart": 987,
                 "end": 0,
-                "raw": "\"YZ\"",
+                "name": {
+                  "commentStart": 987,
+                  "end": 0,
+                  "name": "YZ",
+                  "start": 0,
+                  "type": "Identifier"
+                },
+                "path": [],
                 "start": 0,
-                "type": "Literal",
+                "type": "Name",
-                "type": "Literal",
+                "type": "Name"
-                "value": "YZ"
               }
             },
             {
               "abs_path": false,
-              "commentStart": 1027,
+              "commentStart": 1019,
               "end": 0,
               "name": {
-                "commentStart": 1027,
+                "commentStart": 1019,
                 "end": 0,
                 "name": "benchLength",
                 "start": 0,
@@ -602,10 +638,10 @@ description: Result of parsing bench.kcl
           ],
           "callee": {
             "abs_path": false,
-            "commentStart": 971,
+            "commentStart": 965,
             "end": 0,
             "name": {
-              "commentStart": 971,
+              "commentStart": 965,
               "end": 0,
               "name": "connector",
               "start": 0,
@@ -615,7 +651,7 @@ description: Result of parsing bench.kcl
             "start": 0,
             "type": "Name"
           },
-          "commentStart": 971,
+          "commentStart": 965,
           "end": 0,
           "start": 0,
           "type": "CallExpression",
@@ -631,7 +667,7 @@ description: Result of parsing bench.kcl
         "type": "ExpressionStatement"
       },
       {
-        "commentStart": 1039,
+        "commentStart": 1031,
         "end": 0,
         "expression": {
           "arguments": [
@@ -640,25 +676,25 @@ description: Result of parsing bench.kcl
                 {
                   "type": "LabeledArg",
                   "label": {
-                    "commentStart": 1094,
+                    "commentStart": 1084,
                     "end": 0,
                     "name": "offset",
                     "start": 0,
                     "type": "Identifier"
                   },
                   "arg": {
-                    "commentStart": 1103,
+                    "commentStart": 1093,
                     "end": 0,
                     "left": {
-                      "commentStart": 1103,
+                      "commentStart": 1093,
                       "end": 0,
                       "left": {
                         "argument": {
                           "abs_path": false,
-                          "commentStart": 1104,
+                          "commentStart": 1094,
                           "end": 0,
                           "name": {
-                            "commentStart": 1104,
+                            "commentStart": 1094,
                             "end": 0,
                             "name": "benchLength",
                             "start": 0,
@@ -669,7 +705,7 @@ description: Result of parsing bench.kcl
                           "type": "Name",
                           "type": "Name"
                         },
-                        "commentStart": 1103,
+                        "commentStart": 1093,
                         "end": 0,
                         "operator": "-",
                         "start": 0,
@@ -678,7 +714,7 @@ description: Result of parsing bench.kcl
                       },
                       "operator": "/",
                       "right": {
-                        "commentStart": 1118,
+                        "commentStart": 1108,
                         "end": 0,
                         "raw": "2",
                         "start": 0,
@@ -695,14 +731,14 @@ description: Result of parsing bench.kcl
                     },
                     "operator": "-",
                     "right": {
-                      "commentStart": 1122,
+                      "commentStart": 1113,
                       "end": 0,
                       "left": {
                         "abs_path": false,
-                        "commentStart": 1122,
+                        "commentStart": 1113,
                         "end": 0,
                         "name": {
-                          "commentStart": 1122,
+                          "commentStart": 1113,
                           "end": 0,
                           "name": "dividerThickness",
                           "start": 0,
@@ -715,7 +751,7 @@ description: Result of parsing bench.kcl
                       },
                       "operator": "/",
                       "right": {
-                        "commentStart": 1141,
+                        "commentStart": 1132,
                         "end": 0,
                         "raw": "2",
                         "start": 0,
@@ -738,10 +774,10 @@ description: Result of parsing bench.kcl
               ],
               "callee": {
                 "abs_path": false,
-                "commentStart": 1076,
+                "commentStart": 1068,
                 "end": 0,
                 "name": {
-                  "commentStart": 1076,
+                  "commentStart": 1068,
                   "end": 0,
                   "name": "offsetPlane",
                   "start": 0,
@@ -751,30 +787,37 @@ description: Result of parsing bench.kcl
                 "start": 0,
                 "type": "Name"
               },
-              "commentStart": 1076,
+              "commentStart": 1068,
               "end": 0,
               "start": 0,
               "type": "CallExpressionKw",
               "type": "CallExpressionKw",
               "unlabeled": {
-                "commentStart": 1088,
+                "abs_path": false,
+                "commentStart": 1080,
                 "end": 0,
-                "raw": "\"YZ\"",
+                "name": {
+                  "commentStart": 1080,
+                  "end": 0,
+                  "name": "YZ",
+                  "start": 0,
+                  "type": "Identifier"
+                },
+                "path": [],
                 "start": 0,
-                "type": "Literal",
+                "type": "Name",
-                "type": "Literal",
+                "type": "Name"
-                "value": "YZ"
               }
             },
             {
-              "commentStart": 1145,
+              "commentStart": 1137,
               "end": 0,
               "left": {
                 "abs_path": false,
-                "commentStart": 1145,
+                "commentStart": 1137,
                 "end": 0,
                 "name": {
-                  "commentStart": 1145,
+                  "commentStart": 1137,
                   "end": 0,
                   "name": "benchLength",
                   "start": 0,
@@ -788,10 +831,10 @@ description: Result of parsing bench.kcl
               "operator": "+",
               "right": {
                 "abs_path": false,
-                "commentStart": 1159,
+                "commentStart": 1151,
                 "end": 0,
                 "name": {
-                  "commentStart": 1159,
+                  "commentStart": 1151,
                   "end": 0,
                   "name": "dividerThickness",
                   "start": 0,
@@ -809,10 +852,10 @@ description: Result of parsing bench.kcl
           ],
           "callee": {
             "abs_path": false,
-            "commentStart": 1066,
+            "commentStart": 1058,
             "end": 0,
             "name": {
-              "commentStart": 1066,
+              "commentStart": 1058,
               "end": 0,
               "name": "seatSlats",
               "start": 0,
@@ -822,7 +865,7 @@ description: Result of parsing bench.kcl
             "start": 0,
             "type": "Name"
           },
-          "commentStart": 1066,
+          "commentStart": 1058,
           "end": 0,
           "start": 0,
           "type": "CallExpression",
@@ -838,7 +881,7 @@ description: Result of parsing bench.kcl
         "type": "ExpressionStatement"
       },
       {
-        "commentStart": 1176,
+        "commentStart": 1168,
         "end": 0,
         "expression": {
           "arguments": [
@@ -847,25 +890,25 @@ description: Result of parsing bench.kcl
                 {
                   "type": "LabeledArg",
                   "label": {
-                    "commentStart": 1231,
+                    "commentStart": 1221,
                     "end": 0,
                     "name": "offset",
                     "start": 0,
                     "type": "Identifier"
                   },
                   "arg": {
-                    "commentStart": 1240,
+                    "commentStart": 1230,
                     "end": 0,
                     "left": {
-                      "commentStart": 1240,
+                      "commentStart": 1230,
                       "end": 0,
                       "left": {
                         "argument": {
                           "abs_path": false,
-                          "commentStart": 1241,
+                          "commentStart": 1231,
                           "end": 0,
                           "name": {
-                            "commentStart": 1241,
+                            "commentStart": 1231,
                             "end": 0,
                             "name": "benchLength",
                             "start": 0,
@@ -876,7 +919,7 @@ description: Result of parsing bench.kcl
                           "type": "Name",
                           "type": "Name"
                         },
-                        "commentStart": 1240,
+                        "commentStart": 1230,
                         "end": 0,
                         "operator": "-",
                         "start": 0,
@@ -885,7 +928,7 @@ description: Result of parsing bench.kcl
                       },
                       "operator": "/",
                       "right": {
-                        "commentStart": 1255,
+                        "commentStart": 1245,
                         "end": 0,
                         "raw": "2",
                         "start": 0,
@@ -902,14 +945,14 @@ description: Result of parsing bench.kcl
                     },
                     "operator": "-",
                     "right": {
-                      "commentStart": 1259,
+                      "commentStart": 1250,
                       "end": 0,
                       "left": {
                         "abs_path": false,
-                        "commentStart": 1259,
+                        "commentStart": 1250,
                         "end": 0,
                         "name": {
-                          "commentStart": 1259,
+                          "commentStart": 1250,
                           "end": 0,
                           "name": "dividerThickness",
                           "start": 0,
@@ -922,7 +965,7 @@ description: Result of parsing bench.kcl
                       },
                       "operator": "/",
                       "right": {
-                        "commentStart": 1278,
+                        "commentStart": 1269,
                         "end": 0,
                         "raw": "2",
                         "start": 0,
@@ -945,10 +988,10 @@ description: Result of parsing bench.kcl
               ],
               "callee": {
                 "abs_path": false,
-                "commentStart": 1213,
+                "commentStart": 1205,
                 "end": 0,
                 "name": {
-                  "commentStart": 1213,
+                  "commentStart": 1205,
                   "end": 0,
                   "name": "offsetPlane",
                   "start": 0,
@@ -958,30 +1001,37 @@ description: Result of parsing bench.kcl
                 "start": 0,
                 "type": "Name"
               },
-              "commentStart": 1213,
+              "commentStart": 1205,
               "end": 0,
               "start": 0,
               "type": "CallExpressionKw",
               "type": "CallExpressionKw",
               "unlabeled": {
-                "commentStart": 1225,
+                "abs_path": false,
+                "commentStart": 1217,
                 "end": 0,
-                "raw": "\"YZ\"",
+                "name": {
+                  "commentStart": 1217,
+                  "end": 0,
+                  "name": "YZ",
+                  "start": 0,
+                  "type": "Identifier"
+                },
+                "path": [],
                 "start": 0,
-                "type": "Literal",
+                "type": "Name",
-                "type": "Literal",
+                "type": "Name"
-                "value": "YZ"
               }
             },
             {
-              "commentStart": 1282,
+              "commentStart": 1274,
               "end": 0,
               "left": {
                 "abs_path": false,
-                "commentStart": 1282,
+                "commentStart": 1274,
                 "end": 0,
                 "name": {
-                  "commentStart": 1282,
+                  "commentStart": 1274,
                   "end": 0,
                   "name": "benchLength",
                   "start": 0,
@@ -995,10 +1045,10 @@ description: Result of parsing bench.kcl
               "operator": "+",
               "right": {
                 "abs_path": false,
-                "commentStart": 1296,
+                "commentStart": 1288,
                 "end": 0,
                 "name": {
-                  "commentStart": 1296,
+                  "commentStart": 1288,
                   "end": 0,
                   "name": "dividerThickness",
                   "start": 0,
@@ -1016,10 +1066,10 @@ description: Result of parsing bench.kcl
           ],
           "callee": {
             "abs_path": false,
-            "commentStart": 1203,
+            "commentStart": 1195,
             "end": 0,
             "name": {
-              "commentStart": 1203,
+              "commentStart": 1195,
               "end": 0,
               "name": "backSlats",
               "start": 0,
@@ -1029,7 +1079,7 @@ description: Result of parsing bench.kcl
             "start": 0,
             "type": "Name"
           },
-          "commentStart": 1203,
+          "commentStart": 1195,
           "end": 0,
           "start": 0,
           "type": "CallExpression",
@@ -1045,28 +1095,43 @@ description: Result of parsing bench.kcl
         "type": "ExpressionStatement"
       },
       {
-        "commentStart": 1313,
+        "commentStart": 1305,
         "end": 0,
         "expression": {
           "arguments": [
             {
-              "commentStart": 1347,
+              "argument": {
+                "abs_path": false,
+                "commentStart": 1340,
+                "end": 0,
+                "name": {
+                  "commentStart": 1340,
+                  "end": 0,
+                  "name": "YZ",
+                  "start": 0,
+                  "type": "Identifier"
+                },
+                "path": [],
+                "start": 0,
+                "type": "Name",
+                "type": "Name"
+              },
+              "commentStart": 1339,
               "end": 0,
-              "raw": "\"-YZ\"",
+              "operator": "-",
               "start": 0,
-              "type": "Literal",
+              "type": "UnaryExpression",
-              "type": "Literal",
+              "type": "UnaryExpression"
-              "value": "-YZ"
             },
             {
-              "commentStart": 1354,
+              "commentStart": 1344,
               "end": 0,
               "left": {
                 "abs_path": false,
-                "commentStart": 1354,
+                "commentStart": 1344,
                 "end": 0,
                 "name": {
-                  "commentStart": 1354,
+                  "commentStart": 1344,
                   "end": 0,
                   "name": "benchLength",
                   "start": 0,
@@ -1079,7 +1144,7 @@ description: Result of parsing bench.kcl
               },
               "operator": "/",
               "right": {
-                "commentStart": 1368,
+                "commentStart": 1358,
                 "end": 0,
                 "raw": "2",
                 "start": 0,
@@ -1097,10 +1162,10 @@ description: Result of parsing bench.kcl
           ],
           "callee": {
             "abs_path": false,
-            "commentStart": 1339,
+            "commentStart": 1331,
             "end": 0,
             "name": {
-              "commentStart": 1339,
+              "commentStart": 1331,
               "end": 0,
               "name": "armRest",
               "start": 0,
@@ -1110,7 +1175,7 @@ description: Result of parsing bench.kcl
             "start": 0,
             "type": "Name"
           },
-          "commentStart": 1339,
+          "commentStart": 1331,
           "end": 0,
           "start": 0,
           "type": "CallExpression",
@@ -1126,29 +1191,44 @@ description: Result of parsing bench.kcl
         "type": "ExpressionStatement"
       },
       {
-        "commentStart": 1371,
+        "commentStart": 1361,
         "end": 0,
         "expression": {
           "arguments": [
             {
-              "commentStart": 1379,
+              "argument": {
+                "abs_path": false,
+                "commentStart": 1370,
+                "end": 0,
+                "name": {
+                  "commentStart": 1370,
+                  "end": 0,
+                  "name": "YZ",
+                  "start": 0,
+                  "type": "Identifier"
+                },
+                "path": [],
+                "start": 0,
+                "type": "Name",
+                "type": "Name"
+              },
+              "commentStart": 1369,
               "end": 0,
-              "raw": "\"-YZ\"",
+              "operator": "-",
               "start": 0,
-              "type": "Literal",
+              "type": "UnaryExpression",
-              "type": "Literal",
+              "type": "UnaryExpression"
-              "value": "-YZ"
             },
             {
-              "commentStart": 1386,
+              "commentStart": 1374,
               "end": 0,
               "left": {
                 "argument": {
                   "abs_path": false,
-                  "commentStart": 1387,
+                  "commentStart": 1375,
                   "end": 0,
                   "name": {
-                    "commentStart": 1387,
+                    "commentStart": 1375,
                     "end": 0,
                     "name": "benchLength",
                     "start": 0,
@@ -1159,7 +1239,7 @@ description: Result of parsing bench.kcl
                   "type": "Name",
                   "type": "Name"
                 },
-                "commentStart": 1386,
+                "commentStart": 1374,
                 "end": 0,
                 "operator": "-",
                 "start": 0,
@@ -1168,7 +1248,7 @@ description: Result of parsing bench.kcl
               },
               "operator": "/",
               "right": {
-                "commentStart": 1401,
+                "commentStart": 1389,
                 "end": 0,
                 "raw": "2",
                 "start": 0,
@@ -1186,10 +1266,10 @@ description: Result of parsing bench.kcl
           ],
           "callee": {
             "abs_path": false,
-            "commentStart": 1371,
+            "commentStart": 1361,
             "end": 0,
             "name": {
-              "commentStart": 1371,
+              "commentStart": 1361,
               "end": 0,
               "name": "armRest",
               "start": 0,
@@ -1199,7 +1279,7 @@ description: Result of parsing bench.kcl
             "start": 0,
             "type": "Name"
           },
-          "commentStart": 1371,
+          "commentStart": 1361,
           "end": 0,
           "start": 0,
           "type": "CallExpression",

rust/kcl-lib/tests/kcl_samples/bench/ops.snap

@@ -31,8 +31,8 @@ description: Operations executed bench.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
+          "type": "Plane",
-          "value": "YZ"
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }
@@ -87,8 +87,8 @@ description: Operations executed bench.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
+          "type": "Plane",
-          "value": "YZ"
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }
@@ -236,8 +236,8 @@ description: Operations executed bench.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "-YZ"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }
@@ -475,8 +475,8 @@ description: Operations executed bench.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "YZ"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }
@@ -714,8 +714,8 @@ description: Operations executed bench.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "YZ"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }
@@ -877,8 +877,8 @@ description: Operations executed bench.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "YZ"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }
@@ -995,8 +995,8 @@ description: Operations executed bench.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "YZ"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }
@@ -1094,7 +1094,7 @@ description: Operations executed bench.kcl
     "name": "armRest",
     "functionSourceRange": [
       3671,
-      3861,
+      3859,
       4
     ],
     "unlabeledArg": null,
@@ -1119,8 +1119,8 @@ description: Operations executed bench.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "-YZ"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }
@@ -1179,8 +1179,8 @@ description: Operations executed bench.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "-XZ"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }
@@ -1248,7 +1248,7 @@ description: Operations executed bench.kcl
     "name": "armRest",
     "functionSourceRange": [
       3671,
-      3861,
+      3859,
       4
     ],
     "unlabeledArg": null,
@@ -1273,8 +1273,8 @@ description: Operations executed bench.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "-YZ"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }
@@ -1333,8 +1333,8 @@ description: Operations executed bench.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "-XZ"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }

rust/kcl-lib/tests/kcl_samples/bracket/artifact_graph_flowchart.snap.md

@@ -1,28 +1,28 @@
 ```mermaid
 flowchart LR
   subgraph path2 [Path]
-    2["Path<br>[1086, 1111, 0]"]
+    2["Path<br>[1085, 1110, 0]"]
-    3["Segment<br>[1117, 1170, 0]"]
+    3["Segment<br>[1116, 1169, 0]"]
-    4["Segment<br>[1176, 1215, 0]"]
+    4["Segment<br>[1175, 1214, 0]"]
-    5["Segment<br>[1221, 1263, 0]"]
+    5["Segment<br>[1220, 1262, 0]"]
-    6["Segment<br>[1269, 1310, 0]"]
+    6["Segment<br>[1268, 1309, 0]"]
-    7["Segment<br>[1316, 1355, 0]"]
+    7["Segment<br>[1315, 1354, 0]"]
-    8["Segment<br>[1361, 1431, 0]"]
+    8["Segment<br>[1360, 1430, 0]"]
-    9["Segment<br>[1437, 1444, 0]"]
+    9["Segment<br>[1436, 1443, 0]"]
     10[Solid2d]
   end
   subgraph path38 [Path]
-    38["Path<br>[1906, 1981, 0]"]
+    38["Path<br>[1823, 1885, 0]"]
-    39["Segment<br>[1906, 1981, 0]"]
+    39["Segment<br>[1823, 1885, 0]"]
     40[Solid2d]
   end
   subgraph path48 [Path]
-    48["Path<br>[2240, 2312, 0]"]
+    48["Path<br>[2112, 2171, 0]"]
-    49["Segment<br>[2240, 2312, 0]"]
+    49["Segment<br>[2112, 2171, 0]"]
     50[Solid2d]
   end
-  1["Plane<br>[1061, 1080, 0]"]
+  1["Plane<br>[1062, 1079, 0]"]
-  11["Sweep Extrusion<br>[1450, 1476, 0]"]
+  11["Sweep Extrusion<br>[1449, 1475, 0]"]
   12[Wall]
   13[Wall]
   14[Wall]
@@ -43,26 +43,26 @@ flowchart LR
   29["SweepEdge Adjacent"]
   30["SweepEdge Opposite"]
   31["SweepEdge Adjacent"]
-  32["EdgeCut Fillet<br>[1482, 1573, 0]"]
+  32["EdgeCut Fillet<br>[1481, 1550, 0]"]
-  33["EdgeCut Fillet<br>[1579, 1667, 0]"]
+  33["EdgeCut Fillet<br>[1556, 1622, 0]"]
-  34["EdgeCut Fillet<br>[1673, 1761, 0]"]
+  34["EdgeCut Fillet<br>[1628, 1697, 0]"]
-  35["EdgeCut Fillet<br>[1673, 1761, 0]"]
+  35["EdgeCut Fillet<br>[1628, 1697, 0]"]
-  36["EdgeCut Fillet<br>[1767, 1855, 0]"]
+  36["EdgeCut Fillet<br>[1703, 1772, 0]"]
-  37["EdgeCut Fillet<br>[1767, 1855, 0]"]
+  37["EdgeCut Fillet<br>[1703, 1772, 0]"]
-  41["Sweep Extrusion<br>[2154, 2189, 0]"]
+  41["Sweep Extrusion<br>[2024, 2061, 0]"]
   42[Wall]
   43["SweepEdge Opposite"]
   44["SweepEdge Adjacent"]
-  45["Sweep Extrusion<br>[2154, 2189, 0]"]
+  45["Sweep Extrusion<br>[2024, 2061, 0]"]
-  46["Sweep Extrusion<br>[2154, 2189, 0]"]
+  46["Sweep Extrusion<br>[2024, 2061, 0]"]
-  47["Sweep Extrusion<br>[2154, 2189, 0]"]
+  47["Sweep Extrusion<br>[2024, 2061, 0]"]
-  51["Sweep Extrusion<br>[2400, 2435, 0]"]
+  51["Sweep Extrusion<br>[2242, 2279, 0]"]
   52[Wall]
   53["SweepEdge Opposite"]
   54["SweepEdge Adjacent"]
-  55["Sweep Extrusion<br>[2400, 2435, 0]"]
+  55["Sweep Extrusion<br>[2242, 2279, 0]"]
-  56["StartSketchOnFace<br>[1869, 1900, 0]"]
+  56["StartSketchOnFace<br>[1786, 1817, 0]"]
-  57["StartSketchOnFace<br>[2203, 2234, 0]"]
+  57["StartSketchOnFace<br>[2075, 2106, 0]"]
   1 --- 2
   2 --- 3
   2 --- 4

rust/kcl-lib/tests/kcl_samples/bracket/ops.snap

@@ -7,8 +7,8 @@ description: Operations executed bracket.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
+          "type": "Plane",
-          "value": "XZ"
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }

rust/kcl-lib/tests/kcl_samples/car-wheel-assembly/artifact_graph_flowchart.snap.md

@@ -1,264 +1,264 @@
 ```mermaid
 flowchart LR
   subgraph path2 [Path]
-    2["Path<br>[571, 643, 5]"]
+    2["Path<br>[567, 618, 5]"]
-    3["Segment<br>[571, 643, 5]"]
+    3["Segment<br>[567, 618, 5]"]
     4[Solid2d]
   end
   subgraph path11 [Path]
-    11["Path<br>[828, 905, 5]"]
+    11["Path<br>[803, 859, 5]"]
-    12["Segment<br>[828, 905, 5]"]
+    12["Segment<br>[803, 859, 5]"]
     13[Solid2d]
   end
   subgraph path19 [Path]
-    19["Path<br>[1030, 1104, 5]"]
+    19["Path<br>[984, 1037, 5]"]
-    20["Segment<br>[1030, 1104, 5]"]
+    20["Segment<br>[984, 1037, 5]"]
     21[Solid2d]
   end
   subgraph path30 [Path]
-    30["Path<br>[1486, 1526, 5]"]
+    30["Path<br>[1420, 1460, 5]"]
-    31["Segment<br>[1486, 1526, 5]"]
+    31["Segment<br>[1420, 1460, 5]"]
     32[Solid2d]
   end
   subgraph path38 [Path]
-    38["Path<br>[1630, 1702, 5]"]
+    38["Path<br>[1564, 1615, 5]"]
-    39["Segment<br>[1630, 1702, 5]"]
+    39["Segment<br>[1564, 1615, 5]"]
     40[Solid2d]
   end
   subgraph path47 [Path]
-    47["Path<br>[1835, 1909, 5]"]
+    47["Path<br>[1748, 1801, 5]"]
-    48["Segment<br>[1835, 1909, 5]"]
+    48["Segment<br>[1748, 1801, 5]"]
     49[Solid2d]
   end
   subgraph path58 [Path]
-    58["Path<br>[2151, 2244, 5]"]
+    58["Path<br>[2044, 2116, 5]"]
-    59["Segment<br>[2151, 2244, 5]"]
+    59["Segment<br>[2044, 2116, 5]"]
     60[Solid2d]
   end
   subgraph path81 [Path]
-    81["Path<br>[2500, 2531, 5]"]
+    81["Path<br>[2373, 2404, 5]"]
-    82["Segment<br>[2537, 2557, 5]"]
+    82["Segment<br>[2410, 2430, 5]"]
-    83["Segment<br>[2563, 2583, 5]"]
+    83["Segment<br>[2436, 2456, 5]"]
-    84["Segment<br>[2589, 2610, 5]"]
+    84["Segment<br>[2462, 2483, 5]"]
-    85["Segment<br>[2616, 2672, 5]"]
+    85["Segment<br>[2489, 2545, 5]"]
-    86["Segment<br>[2678, 2685, 5]"]
+    86["Segment<br>[2551, 2558, 5]"]
     87[Solid2d]
   end
   subgraph path106 [Path]
-    106["Path<br>[2986, 3018, 5]"]
+    106["Path<br>[2860, 2892, 5]"]
-    107["Segment<br>[3024, 3045, 5]"]
+    107["Segment<br>[2898, 2919, 5]"]
-    108["Segment<br>[3051, 3071, 5]"]
+    108["Segment<br>[2925, 2945, 5]"]
-    109["Segment<br>[3077, 3097, 5]"]
+    109["Segment<br>[2951, 2971, 5]"]
-    110["Segment<br>[3103, 3159, 5]"]
+    110["Segment<br>[2977, 3033, 5]"]
-    111["Segment<br>[3165, 3172, 5]"]
+    111["Segment<br>[3039, 3046, 5]"]
     112[Solid2d]
   end
   subgraph path132 [Path]
-    132["Path<br>[354, 431, 4]"]
+    132["Path<br>[350, 406, 4]"]
-    133["Segment<br>[354, 431, 4]"]
+    133["Segment<br>[350, 406, 4]"]
     134[Solid2d]
   end
   subgraph path135 [Path]
-    135["Path<br>[442, 519, 4]"]
+    135["Path<br>[417, 473, 4]"]
-    136["Segment<br>[442, 519, 4]"]
+    136["Segment<br>[417, 473, 4]"]
     137[Solid2d]
   end
   subgraph path144 [Path]
-    144["Path<br>[684, 761, 4]"]
+    144["Path<br>[638, 694, 4]"]
-    145["Segment<br>[684, 761, 4]"]
+    145["Segment<br>[638, 694, 4]"]
     146[Solid2d]
   end
   subgraph path147 [Path]
-    147["Path<br>[772, 849, 4]"]
+    147["Path<br>[705, 761, 4]"]
-    148["Segment<br>[772, 849, 4]"]
+    148["Segment<br>[705, 761, 4]"]
     149[Solid2d]
   end
   subgraph path156 [Path]
-    156["Path<br>[993, 1068, 4]"]
+    156["Path<br>[905, 959, 4]"]
-    157["Segment<br>[993, 1068, 4]"]
+    157["Segment<br>[905, 959, 4]"]
     158[Solid2d]
   end
   subgraph path167 [Path]
-    167["Path<br>[1345, 1426, 4]"]
+    167["Path<br>[1237, 1297, 4]"]
-    168["Segment<br>[1345, 1426, 4]"]
+    168["Segment<br>[1237, 1297, 4]"]
     169[Solid2d]
   end
   subgraph path179 [Path]
-    179["Path<br>[1785, 1831, 4]"]
+    179["Path<br>[1655, 1701, 4]"]
-    180["Segment<br>[1837, 1889, 4]"]
+    180["Segment<br>[1707, 1759, 4]"]
-    181["Segment<br>[1895, 2000, 4]"]
+    181["Segment<br>[1765, 1870, 4]"]
-    182["Segment<br>[2006, 2028, 4]"]
+    182["Segment<br>[1876, 1898, 4]"]
-    183["Segment<br>[2034, 2090, 4]"]
+    183["Segment<br>[1904, 1960, 4]"]
-    184["Segment<br>[2096, 2103, 4]"]
+    184["Segment<br>[1966, 1973, 4]"]
     185[Solid2d]
   end
   subgraph path195 [Path]
-    195["Path<br>[2239, 2285, 4]"]
+    195["Path<br>[2107, 2153, 4]"]
-    196["Segment<br>[2291, 2343, 4]"]
+    196["Segment<br>[2159, 2211, 4]"]
-    197["Segment<br>[2349, 2456, 4]"]
+    197["Segment<br>[2217, 2324, 4]"]
-    198["Segment<br>[2462, 2499, 4]"]
+    198["Segment<br>[2330, 2367, 4]"]
-    199["Segment<br>[2505, 2561, 4]"]
+    199["Segment<br>[2373, 2429, 4]"]
-    200["Segment<br>[2567, 2574, 4]"]
+    200["Segment<br>[2435, 2442, 4]"]
     201[Solid2d]
   end
   subgraph path212 [Path]
-    212["Path<br>[3085, 3132, 4]"]
+    212["Path<br>[2953, 3000, 4]"]
-    213["Segment<br>[3140, 3480, 4]"]
+    213["Segment<br>[3008, 3348, 4]"]
-    214["Segment<br>[3488, 3520, 4]"]
+    214["Segment<br>[3356, 3388, 4]"]
-    215["Segment<br>[3528, 3872, 4]"]
+    215["Segment<br>[3396, 3740, 4]"]
-    216["Segment<br>[3880, 3936, 4]"]
+    216["Segment<br>[3748, 3804, 4]"]
-    217["Segment<br>[3944, 3951, 4]"]
+    217["Segment<br>[3812, 3819, 4]"]
     218[Solid2d]
   end
   subgraph path235 [Path]
-    235["Path<br>[3085, 3132, 4]"]
+    235["Path<br>[2953, 3000, 4]"]
-    236["Segment<br>[3140, 3480, 4]"]
+    236["Segment<br>[3008, 3348, 4]"]
-    237["Segment<br>[3488, 3520, 4]"]
+    237["Segment<br>[3356, 3388, 4]"]
-    238["Segment<br>[3528, 3872, 4]"]
+    238["Segment<br>[3396, 3740, 4]"]
-    239["Segment<br>[3880, 3936, 4]"]
+    239["Segment<br>[3748, 3804, 4]"]
-    240["Segment<br>[3944, 3951, 4]"]
+    240["Segment<br>[3812, 3819, 4]"]
     241[Solid2d]
   end
   subgraph path258 [Path]
-    258["Path<br>[4480, 4575, 4]"]
+    258["Path<br>[4347, 4442, 4]"]
-    259["Segment<br>[4581, 4614, 4]"]
+    259["Segment<br>[4448, 4481, 4]"]
-    260["Segment<br>[4620, 4671, 4]"]
+    260["Segment<br>[4487, 4538, 4]"]
-    261["Segment<br>[4677, 4710, 4]"]
+    261["Segment<br>[4544, 4577, 4]"]
-    262["Segment<br>[4716, 4766, 4]"]
+    262["Segment<br>[4583, 4633, 4]"]
-    263["Segment<br>[4772, 4813, 4]"]
+    263["Segment<br>[4639, 4680, 4]"]
-    264["Segment<br>[4819, 4868, 4]"]
+    264["Segment<br>[4686, 4735, 4]"]
-    265["Segment<br>[4874, 4907, 4]"]
+    265["Segment<br>[4741, 4774, 4]"]
-    266["Segment<br>[4913, 4947, 4]"]
+    266["Segment<br>[4780, 4814, 4]"]
-    267["Segment<br>[4953, 4987, 4]"]
+    267["Segment<br>[4820, 4854, 4]"]
-    268["Segment<br>[4993, 5045, 4]"]
+    268["Segment<br>[4860, 4912, 4]"]
-    269["Segment<br>[5051, 5085, 4]"]
+    269["Segment<br>[4918, 4952, 4]"]
-    270["Segment<br>[5091, 5167, 4]"]
+    270["Segment<br>[4958, 5034, 4]"]
-    271["Segment<br>[5173, 5206, 4]"]
+    271["Segment<br>[5040, 5073, 4]"]
-    272["Segment<br>[5212, 5288, 4]"]
+    272["Segment<br>[5079, 5155, 4]"]
-    273["Segment<br>[5294, 5328, 4]"]
+    273["Segment<br>[5161, 5195, 4]"]
-    274["Segment<br>[5334, 5408, 4]"]
+    274["Segment<br>[5201, 5275, 4]"]
-    275["Segment<br>[5414, 5448, 4]"]
+    275["Segment<br>[5281, 5315, 4]"]
-    276["Segment<br>[5454, 5505, 4]"]
+    276["Segment<br>[5321, 5372, 4]"]
-    277["Segment<br>[5511, 5573, 4]"]
+    277["Segment<br>[5378, 5440, 4]"]
-    278["Segment<br>[5579, 5630, 4]"]
+    278["Segment<br>[5446, 5497, 4]"]
-    279["Segment<br>[5636, 5670, 4]"]
+    279["Segment<br>[5503, 5537, 4]"]
-    280["Segment<br>[5676, 5709, 4]"]
+    280["Segment<br>[5543, 5576, 4]"]
-    281["Segment<br>[5715, 5748, 4]"]
+    281["Segment<br>[5582, 5615, 4]"]
-    282["Segment<br>[5754, 5761, 4]"]
+    282["Segment<br>[5621, 5628, 4]"]
     283[Solid2d]
   end
   subgraph path334 [Path]
-    334["Path<br>[742, 782, 7]"]
+    334["Path<br>[740, 780, 7]"]
-    335["Segment<br>[790, 852, 7]"]
+    335["Segment<br>[788, 850, 7]"]
-    336["Segment<br>[860, 896, 7]"]
+    336["Segment<br>[858, 894, 7]"]
-    337["Segment<br>[904, 934, 7]"]
+    337["Segment<br>[902, 932, 7]"]
-    338["Segment<br>[942, 994, 7]"]
+    338["Segment<br>[940, 992, 7]"]
-    339["Segment<br>[1002, 1042, 7]"]
+    339["Segment<br>[1000, 1040, 7]"]
-    340["Segment<br>[1050, 1085, 7]"]
+    340["Segment<br>[1048, 1083, 7]"]
-    341["Segment<br>[1093, 1131, 7]"]
+    341["Segment<br>[1091, 1129, 7]"]
-    342["Segment<br>[1139, 1161, 7]"]
+    342["Segment<br>[1137, 1159, 7]"]
-    343["Segment<br>[1169, 1176, 7]"]
+    343["Segment<br>[1167, 1174, 7]"]
     344[Solid2d]
   end
   subgraph path365 [Path]
-    365["Path<br>[511, 592, 6]"]
+    365["Path<br>[507, 588, 6]"]
-    366["Segment<br>[598, 699, 6]"]
+    366["Segment<br>[594, 695, 6]"]
-    367["Segment<br>[705, 790, 6]"]
+    367["Segment<br>[701, 786, 6]"]
-    368["Segment<br>[796, 880, 6]"]
+    368["Segment<br>[792, 876, 6]"]
-    369["Segment<br>[886, 972, 6]"]
+    369["Segment<br>[882, 968, 6]"]
-    370["Segment<br>[978, 1063, 6]"]
+    370["Segment<br>[974, 1059, 6]"]
-    371["Segment<br>[1069, 1155, 6]"]
+    371["Segment<br>[1065, 1151, 6]"]
-    372["Segment<br>[1161, 1284, 6]"]
+    372["Segment<br>[1157, 1280, 6]"]
-    373["Segment<br>[1290, 1376, 6]"]
+    373["Segment<br>[1286, 1372, 6]"]
-    374["Segment<br>[1382, 1517, 6]"]
+    374["Segment<br>[1378, 1513, 6]"]
-    375["Segment<br>[1523, 1609, 6]"]
+    375["Segment<br>[1519, 1605, 6]"]
-    376["Segment<br>[1615, 1739, 6]"]
+    376["Segment<br>[1611, 1735, 6]"]
-    377["Segment<br>[1745, 1831, 6]"]
+    377["Segment<br>[1741, 1827, 6]"]
-    378["Segment<br>[1837, 1922, 6]"]
+    378["Segment<br>[1833, 1918, 6]"]
-    379["Segment<br>[1928, 2014, 6]"]
+    379["Segment<br>[1924, 2010, 6]"]
-    380["Segment<br>[2020, 2105, 6]"]
+    380["Segment<br>[2016, 2101, 6]"]
-    381["Segment<br>[2111, 2196, 6]"]
+    381["Segment<br>[2107, 2192, 6]"]
-    382["Segment<br>[2202, 2209, 6]"]
+    382["Segment<br>[2198, 2205, 6]"]
     383[Solid2d]
   end
   subgraph path439 [Path]
-    439["Path<br>[487, 544, 8]"]
+    439["Path<br>[483, 540, 8]"]
-    440["Segment<br>[550, 656, 8]"]
+    440["Segment<br>[546, 680, 8]"]
-    441["Segment<br>[662, 717, 8]"]
+    441["Segment<br>[686, 741, 8]"]
-    442["Segment<br>[723, 820, 8]"]
+    442["Segment<br>[747, 844, 8]"]
-    443["Segment<br>[826, 858, 8]"]
+    443["Segment<br>[850, 882, 8]"]
-    444["Segment<br>[864, 896, 8]"]
+    444["Segment<br>[888, 920, 8]"]
-    445["Segment<br>[902, 933, 8]"]
+    445["Segment<br>[926, 957, 8]"]
-    446["Segment<br>[939, 1054, 8]"]
+    446["Segment<br>[963, 1078, 8]"]
-    447["Segment<br>[1060, 1092, 8]"]
+    447["Segment<br>[1084, 1116, 8]"]
-    448["Segment<br>[1098, 1130, 8]"]
+    448["Segment<br>[1122, 1154, 8]"]
-    449["Segment<br>[1136, 1167, 8]"]
+    449["Segment<br>[1160, 1191, 8]"]
-    450["Segment<br>[1173, 1266, 8]"]
+    450["Segment<br>[1197, 1290, 8]"]
-    451["Segment<br>[1272, 1327, 8]"]
+    451["Segment<br>[1296, 1351, 8]"]
-    452["Segment<br>[1333, 1406, 8]"]
+    452["Segment<br>[1357, 1430, 8]"]
-    453["Segment<br>[1412, 1419, 8]"]
+    453["Segment<br>[1436, 1443, 8]"]
     454[Solid2d]
   end
-  1["Plane<br>[546, 565, 5]"]
+  1["Plane<br>[544, 561, 5]"]
-  5["Sweep Extrusion<br>[652, 708, 5]"]
+  5["Sweep Extrusion<br>[627, 683, 5]"]
   6[Wall]
   7["Cap Start"]
   8["Cap End"]
   9["SweepEdge Opposite"]
   10["SweepEdge Adjacent"]
-  14["Sweep Extrusion<br>[918, 980, 5]"]
+  14["Sweep Extrusion<br>[872, 934, 5]"]
   15[Wall]
   16["Cap End"]
   17["SweepEdge Opposite"]
   18["SweepEdge Adjacent"]
-  22["Sweep Extrusion<br>[1250, 1329, 5]"]
+  22["Sweep Extrusion<br>[1184, 1263, 5]"]
   23[Wall]
   24["SweepEdge Opposite"]
   25["SweepEdge Adjacent"]
-  26["Sweep Extrusion<br>[1250, 1329, 5]"]
+  26["Sweep Extrusion<br>[1184, 1263, 5]"]
-  27["Sweep Extrusion<br>[1250, 1329, 5]"]
+  27["Sweep Extrusion<br>[1184, 1263, 5]"]
-  28["Sweep Extrusion<br>[1250, 1329, 5]"]
+  28["Sweep Extrusion<br>[1184, 1263, 5]"]
-  29["Sweep Extrusion<br>[1250, 1329, 5]"]
+  29["Sweep Extrusion<br>[1184, 1263, 5]"]
-  33["Sweep Extrusion<br>[1532, 1565, 5]"]
+  33["Sweep Extrusion<br>[1466, 1499, 5]"]
   34[Wall]
   35["Cap End"]
   36["SweepEdge Opposite"]
   37["SweepEdge Adjacent"]
-  41["Sweep Extrusion<br>[1717, 1782, 5]"]
+  41["Sweep Extrusion<br>[1630, 1695, 5]"]
   42[Wall]
   43["Cap Start"]
   44["Cap End"]
   45["SweepEdge Opposite"]
   46["SweepEdge Adjacent"]
-  50["Sweep Extrusion<br>[2055, 2099, 5]"]
+  50["Sweep Extrusion<br>[1948, 1992, 5]"]
   51[Wall]
   52["SweepEdge Opposite"]
   53["SweepEdge Adjacent"]
-  54["Sweep Extrusion<br>[2055, 2099, 5]"]
+  54["Sweep Extrusion<br>[1948, 1992, 5]"]
-  55["Sweep Extrusion<br>[2055, 2099, 5]"]
+  55["Sweep Extrusion<br>[1948, 1992, 5]"]
-  56["Sweep Extrusion<br>[2055, 2099, 5]"]
+  56["Sweep Extrusion<br>[1948, 1992, 5]"]
-  57["Sweep Extrusion<br>[2055, 2099, 5]"]
+  57["Sweep Extrusion<br>[1948, 1992, 5]"]
-  61["Sweep Extrusion<br>[2398, 2442, 5]"]
+  61["Sweep Extrusion<br>[2271, 2315, 5]"]
   62[Wall]
   63["Cap End"]
   64["SweepEdge Opposite"]
   65["SweepEdge Adjacent"]
-  66["Sweep Extrusion<br>[2398, 2442, 5]"]
+  66["Sweep Extrusion<br>[2271, 2315, 5]"]
-  67["Sweep Extrusion<br>[2398, 2442, 5]"]
+  67["Sweep Extrusion<br>[2271, 2315, 5]"]
-  68["Sweep Extrusion<br>[2398, 2442, 5]"]
+  68["Sweep Extrusion<br>[2271, 2315, 5]"]
-  69["Sweep Extrusion<br>[2398, 2442, 5]"]
+  69["Sweep Extrusion<br>[2271, 2315, 5]"]
-  70["Sweep Extrusion<br>[2398, 2442, 5]"]
+  70["Sweep Extrusion<br>[2271, 2315, 5]"]
-  71["Sweep Extrusion<br>[2398, 2442, 5]"]
+  71["Sweep Extrusion<br>[2271, 2315, 5]"]
-  72["Sweep Extrusion<br>[2398, 2442, 5]"]
+  72["Sweep Extrusion<br>[2271, 2315, 5]"]
-  73["Sweep Extrusion<br>[2398, 2442, 5]"]
+  73["Sweep Extrusion<br>[2271, 2315, 5]"]
-  74["Sweep Extrusion<br>[2398, 2442, 5]"]
+  74["Sweep Extrusion<br>[2271, 2315, 5]"]
-  75["Sweep Extrusion<br>[2398, 2442, 5]"]
+  75["Sweep Extrusion<br>[2271, 2315, 5]"]
-  76["Sweep Extrusion<br>[2398, 2442, 5]"]
+  76["Sweep Extrusion<br>[2271, 2315, 5]"]
-  77["Sweep Extrusion<br>[2398, 2442, 5]"]
+  77["Sweep Extrusion<br>[2271, 2315, 5]"]
-  78["Sweep Extrusion<br>[2398, 2442, 5]"]
+  78["Sweep Extrusion<br>[2271, 2315, 5]"]
-  79["Sweep Extrusion<br>[2398, 2442, 5]"]
+  79["Sweep Extrusion<br>[2271, 2315, 5]"]
-  80["Sweep Extrusion<br>[2398, 2442, 5]"]
+  80["Sweep Extrusion<br>[2271, 2315, 5]"]
-  88["Sweep Extrusion<br>[2850, 2918, 5]"]
+  88["Sweep Extrusion<br>[2724, 2792, 5]"]
   89[Wall]
   90[Wall]
   91[Wall]
@@ -272,11 +272,11 @@ flowchart LR
   99["SweepEdge Adjacent"]
   100["SweepEdge Opposite"]
   101["SweepEdge Adjacent"]
-  102["Sweep Extrusion<br>[2850, 2918, 5]"]
+  102["Sweep Extrusion<br>[2724, 2792, 5]"]
-  103["Sweep Extrusion<br>[2850, 2918, 5]"]
+  103["Sweep Extrusion<br>[2724, 2792, 5]"]
-  104["Sweep Extrusion<br>[2850, 2918, 5]"]
+  104["Sweep Extrusion<br>[2724, 2792, 5]"]
-  105["Sweep Extrusion<br>[2850, 2918, 5]"]
+  105["Sweep Extrusion<br>[2724, 2792, 5]"]
-  113["Sweep Extrusion<br>[3323, 3397, 5]"]
+  113["Sweep Extrusion<br>[3198, 3272, 5]"]
   114[Wall]
   115[Wall]
   116[Wall]
@@ -290,41 +290,41 @@ flowchart LR
   124["SweepEdge Adjacent"]
   125["SweepEdge Opposite"]
   126["SweepEdge Adjacent"]
-  127["Sweep Extrusion<br>[3323, 3397, 5]"]
+  127["Sweep Extrusion<br>[3198, 3272, 5]"]
-  128["Sweep Extrusion<br>[3323, 3397, 5]"]
+  128["Sweep Extrusion<br>[3198, 3272, 5]"]
-  129["Sweep Extrusion<br>[3323, 3397, 5]"]
+  129["Sweep Extrusion<br>[3198, 3272, 5]"]
-  130["Sweep Extrusion<br>[3323, 3397, 5]"]
+  130["Sweep Extrusion<br>[3198, 3272, 5]"]
-  131["Plane<br>[329, 348, 4]"]
+  131["Plane<br>[327, 344, 4]"]
-  138["Sweep Extrusion<br>[529, 562, 4]"]
+  138["Sweep Extrusion<br>[483, 516, 4]"]
   139[Wall]
   140["Cap Start"]
   141["Cap End"]
   142["SweepEdge Opposite"]
   143["SweepEdge Adjacent"]
-  150["Sweep Extrusion<br>[859, 892, 4]"]
+  150["Sweep Extrusion<br>[771, 804, 4]"]
   151[Wall]
   152["Cap Start"]
   153["Cap End"]
   154["SweepEdge Opposite"]
   155["SweepEdge Adjacent"]
-  159["Sweep Extrusion<br>[1214, 1248, 4]"]
+  159["Sweep Extrusion<br>[1106, 1140, 4]"]
   160[Wall]
   161["SweepEdge Opposite"]
   162["SweepEdge Adjacent"]
-  163["Sweep Extrusion<br>[1214, 1248, 4]"]
+  163["Sweep Extrusion<br>[1106, 1140, 4]"]
-  164["Sweep Extrusion<br>[1214, 1248, 4]"]
+  164["Sweep Extrusion<br>[1106, 1140, 4]"]
-  165["Sweep Extrusion<br>[1214, 1248, 4]"]
+  165["Sweep Extrusion<br>[1106, 1140, 4]"]
-  166["Sweep Extrusion<br>[1214, 1248, 4]"]
+  166["Sweep Extrusion<br>[1106, 1140, 4]"]
-  170["Sweep Extrusion<br>[1572, 1606, 4]"]
+  170["Sweep Extrusion<br>[1444, 1478, 4]"]
   171[Wall]
   172["SweepEdge Opposite"]
   173["SweepEdge Adjacent"]
-  174["Sweep Extrusion<br>[1572, 1606, 4]"]
+  174["Sweep Extrusion<br>[1444, 1478, 4]"]
-  175["Sweep Extrusion<br>[1572, 1606, 4]"]
+  175["Sweep Extrusion<br>[1444, 1478, 4]"]
-  176["Sweep Extrusion<br>[1572, 1606, 4]"]
+  176["Sweep Extrusion<br>[1444, 1478, 4]"]
-  177["Sweep Extrusion<br>[1572, 1606, 4]"]
+  177["Sweep Extrusion<br>[1444, 1478, 4]"]
-  178["Plane<br>[1760, 1779, 4]"]
+  178["Plane<br>[1632, 1649, 4]"]
-  186["Sweep Revolve<br>[2109, 2128, 4]"]
+  186["Sweep Revolve<br>[1979, 1998, 4]"]
   187[Wall]
   188[Wall]
   189[Wall]
@@ -332,8 +332,8 @@ flowchart LR
   191["SweepEdge Adjacent"]
   192["SweepEdge Adjacent"]
   193["SweepEdge Adjacent"]
-  194["Plane<br>[2214, 2233, 4]"]
+  194["Plane<br>[2084, 2101, 4]"]
-  202["Sweep Revolve<br>[2580, 2599, 4]"]
+  202["Sweep Revolve<br>[2448, 2467, 4]"]
   203[Wall]
   204[Wall]
   205[Wall]
@@ -342,8 +342,8 @@ flowchart LR
   208["SweepEdge Adjacent"]
   209["SweepEdge Adjacent"]
   210["SweepEdge Adjacent"]
-  211["Plane<br>[3054, 3077, 4]"]
+  211["Plane<br>[2922, 2945, 4]"]
-  219["Sweep Extrusion<br>[3999, 4045, 4]"]
+  219["Sweep Extrusion<br>[3867, 3913, 4]"]
   220[Wall]
   221[Wall]
   222[Wall]
@@ -358,8 +358,8 @@ flowchart LR
   231["SweepEdge Adjacent"]
   232["SweepEdge Opposite"]
   233["SweepEdge Adjacent"]
-  234["Plane<br>[3054, 3077, 4]"]
+  234["Plane<br>[2922, 2945, 4]"]
-  242["Sweep Extrusion<br>[3999, 4045, 4]"]
+  242["Sweep Extrusion<br>[3867, 3913, 4]"]
   243[Wall]
   244[Wall]
   245[Wall]
@@ -374,8 +374,8 @@ flowchart LR
   254["SweepEdge Adjacent"]
   255["SweepEdge Opposite"]
   256["SweepEdge Adjacent"]
-  257["Plane<br>[4455, 4474, 4]"]
+  257["Plane<br>[4324, 4341, 4]"]
-  284["Sweep Revolve<br>[5767, 5786, 4]"]
+  284["Sweep Revolve<br>[5634, 5653, 4]"]
   285[Wall]
   286[Wall]
   287[Wall]
@@ -424,8 +424,8 @@ flowchart LR
   330["SweepEdge Adjacent"]
   331["SweepEdge Adjacent"]
   332["SweepEdge Adjacent"]
-  333["Plane<br>[708, 734, 7]"]
+  333["Plane<br>[706, 732, 7]"]
-  345["Sweep Revolve<br>[1184, 1203, 7]"]
+  345["Sweep Revolve<br>[1182, 1201, 7]"]
   346[Wall]
   347[Wall]
   348[Wall]
@@ -444,8 +444,8 @@ flowchart LR
   361["SweepEdge Adjacent"]
   362["SweepEdge Adjacent"]
   363["SweepEdge Adjacent"]
-  364["Plane<br>[486, 505, 6]"]
+  364["Plane<br>[484, 501, 6]"]
-  384["Sweep Revolve<br>[2247, 2299, 6]"]
+  384["Sweep Revolve<br>[2243, 2295, 6]"]
   385[Wall]
   386[Wall]
   387[Wall]
@@ -499,8 +499,8 @@ flowchart LR
   435["SweepEdge Adjacent"]
   436["SweepEdge Opposite"]
   437["SweepEdge Adjacent"]
-  438["Plane<br>[462, 481, 8]"]
+  438["Plane<br>[460, 477, 8]"]
-  455["Sweep Revolve<br>[1462, 1493, 8]"]
+  455["Sweep Revolve<br>[1486, 1517, 8]"]
   456[Wall]
   457[Wall]
   458[Wall]
@@ -529,17 +529,17 @@ flowchart LR
   481["SweepEdge Adjacent"]
   482["SweepEdge Adjacent"]
   483["SweepEdge Adjacent"]
-  484["StartSketchOnFace<br>[795, 822, 5]"]
+  484["StartSketchOnFace<br>[770, 797, 5]"]
-  485["StartSketchOnFace<br>[993, 1024, 5]"]
+  485["StartSketchOnFace<br>[947, 978, 5]"]
-  486["StartSketchOnFace<br>[1451, 1480, 5]"]
+  486["StartSketchOnFace<br>[1385, 1414, 5]"]
-  487["StartSketchOnFace<br>[1590, 1624, 5]"]
+  487["StartSketchOnFace<br>[1524, 1558, 5]"]
-  488["StartSketchOnFace<br>[1796, 1829, 5]"]
+  488["StartSketchOnFace<br>[1709, 1742, 5]"]
-  489["StartSketchOnFace<br>[2116, 2145, 5]"]
+  489["StartSketchOnFace<br>[2009, 2038, 5]"]
-  490["StartSketchOnFace<br>[2465, 2494, 5]"]
+  490["StartSketchOnFace<br>[2338, 2367, 5]"]
-  491["StartSketchOnFace<br>[2947, 2980, 5]"]
+  491["StartSketchOnFace<br>[2821, 2854, 5]"]
-  492["StartSketchOnFace<br>[649, 678, 4]"]
+  492["StartSketchOnFace<br>[603, 632, 4]"]
-  493["StartSketchOnFace<br>[953, 987, 4]"]
+  493["StartSketchOnFace<br>[865, 899, 4]"]
-  494["StartSketchOnFace<br>[1310, 1339, 4]"]
+  494["StartSketchOnFace<br>[1202, 1231, 4]"]
   1 --- 2
   2 --- 3
   2 ---- 5

rust/kcl-lib/tests/kcl_samples/car-wheel-assembly/ast.snap

@@ -301,14 +301,14 @@ description: Result of parsing car-wheel-assembly.kcl
                 {
                   "type": "LabeledArg",
                   "label": {
-                    "commentStart": 436,
+                    "commentStart": 438,
                     "end": 0,
                     "name": "arcDegrees",
                     "start": 0,
                     "type": "Identifier"
                   },
                   "arg": {
-                    "commentStart": 449,
+                    "commentStart": 451,
                     "end": 0,
                     "raw": "360",
                     "start": 0,
@@ -323,17 +323,17 @@ description: Result of parsing car-wheel-assembly.kcl
                 {
                   "type": "LabeledArg",
                   "label": {
-                    "commentStart": 459,
+                    "commentStart": 463,
                     "end": 0,
                     "name": "axis",
                     "start": 0,
                     "type": "Identifier"
                   },
                   "arg": {
-                    "commentStart": 466,
+                    "commentStart": 470,
                     "elements": [
                       {
-                        "commentStart": 467,
+                        "commentStart": 471,
                         "end": 0,
                         "raw": "0",
                         "start": 0,
@@ -345,7 +345,7 @@ description: Result of parsing car-wheel-assembly.kcl
                         }
                       },
                       {
-                        "commentStart": 470,
+                        "commentStart": 474,
                         "end": 0,
                         "raw": "1",
                         "start": 0,
@@ -357,7 +357,7 @@ description: Result of parsing car-wheel-assembly.kcl
                         }
                       },
                       {
-                        "commentStart": 473,
+                        "commentStart": 477,
                         "end": 0,
                         "raw": "0",
                         "start": 0,
@@ -378,39 +378,15 @@ description: Result of parsing car-wheel-assembly.kcl
                 {
                   "type": "LabeledArg",
                   "label": {
-                    "commentStart": 482,
+                    "commentStart": 488,
                     "end": 0,
                     "name": "center",
                     "start": 0,
                     "type": "Identifier"
                   },
                   "arg": {
-                    "commentStart": 491,
+                    "commentStart": 497,
                     "elements": [
-                      {
-                        "commentStart": 492,
-                        "end": 0,
-                        "raw": "0",
-                        "start": 0,
-                        "type": "Literal",
-                        "type": "Literal",
-                        "value": {
-                          "value": 0.0,
-                          "suffix": "None"
-                        }
-                      },
-                      {
-                        "commentStart": 495,
-                        "end": 0,
-                        "raw": "0",
-                        "start": 0,
-                        "type": "Literal",
-                        "type": "Literal",
-                        "value": {
-                          "value": 0.0,
-                          "suffix": "None"
-                        }
-                      },
                       {
                         "commentStart": 498,
                         "end": 0,
@@ -422,6 +398,30 @@ description: Result of parsing car-wheel-assembly.kcl
                           "value": 0.0,
                           "suffix": "None"
                         }
+                      },
+                      {
+                        "commentStart": 501,
+                        "end": 0,
+                        "raw": "0",
+                        "start": 0,
+                        "type": "Literal",
+                        "type": "Literal",
+                        "value": {
+                          "value": 0.0,
+                          "suffix": "None"
+                        }
+                      },
+                      {
+                        "commentStart": 504,
+                        "end": 0,
+                        "raw": "0",
+                        "start": 0,
+                        "type": "Literal",
+                        "type": "Literal",
+                        "value": {
+                          "value": 0.0,
+                          "suffix": "None"
+                        }
                       }
                     ],
                     "end": 0,
@@ -433,7 +433,7 @@ description: Result of parsing car-wheel-assembly.kcl
                 {
                   "type": "LabeledArg",
                   "label": {
-                    "commentStart": 507,
+                    "commentStart": 515,
                     "end": 0,
                     "name": "instances",
                     "start": 0,
@@ -441,10 +441,10 @@ description: Result of parsing car-wheel-assembly.kcl
                   },
                   "arg": {
                     "abs_path": false,
-                    "commentStart": 519,
+                    "commentStart": 527,
                     "end": 0,
                     "name": {
-                      "commentStart": 519,
+                      "commentStart": 527,
                       "end": 0,
                       "name": "lugCount",
                       "start": 0,
@@ -459,14 +459,14 @@ description: Result of parsing car-wheel-assembly.kcl
                 {
                   "type": "LabeledArg",
                   "label": {
-                    "commentStart": 534,
+                    "commentStart": 544,
                     "end": 0,
                     "name": "rotateDuplicates",
                     "start": 0,
                     "type": "Identifier"
                   },
                   "arg": {
-                    "commentStart": 553,
+                    "commentStart": 563,
                     "end": 0,
                     "raw": "false",
                     "start": 0,
@@ -510,16 +510,16 @@ description: Result of parsing car-wheel-assembly.kcl
         "type": "ExpressionStatement"
       },
       {
-        "commentStart": 564,
+        "commentStart": 577,
         "end": 0,
         "expression": {
           "body": [
             {
               "abs_path": false,
-              "commentStart": 564,
+              "commentStart": 577,
               "end": 0,
               "name": {
-                "commentStart": 564,
+                "commentStart": 577,
                 "end": 0,
                 "name": "brakeCaliper",
                 "start": 0,
@@ -535,17 +535,17 @@ description: Result of parsing car-wheel-assembly.kcl
                 {
                   "type": "LabeledArg",
                   "label": {
-                    "commentStart": 592,
+                    "commentStart": 605,
                     "end": 0,
                     "name": "translate",
                     "start": 0,
                     "type": "Identifier"
                   },
                   "arg": {
-                    "commentStart": 604,
+                    "commentStart": 617,
                     "elements": [
                       {
-                        "commentStart": 605,
+                        "commentStart": 618,
                         "end": 0,
                         "raw": "0",
                         "start": 0,
@@ -557,7 +557,7 @@ description: Result of parsing car-wheel-assembly.kcl
                         }
                       },
                       {
-                        "commentStart": 608,
+                        "commentStart": 621,
                         "end": 0,
                         "raw": "0.5",
                         "start": 0,
@@ -569,7 +569,7 @@ description: Result of parsing car-wheel-assembly.kcl
                         }
                       },
                       {
-                        "commentStart": 613,
+                        "commentStart": 626,
                         "end": 0,
                         "raw": "0",
                         "start": 0,
@@ -590,10 +590,10 @@ description: Result of parsing car-wheel-assembly.kcl
               ],
               "callee": {
                 "abs_path": false,
-                "commentStart": 582,
+                "commentStart": 595,
                 "end": 0,
                 "name": {
-                  "commentStart": 582,
+                  "commentStart": 595,
                   "end": 0,
                   "name": "translate",
                   "start": 0,
@@ -603,7 +603,7 @@ description: Result of parsing car-wheel-assembly.kcl
                 "start": 0,
                 "type": "Name"
               },
-              "commentStart": 582,
+              "commentStart": 595,
               "end": 0,
               "start": 0,
               "type": "CallExpressionKw",
@@ -611,7 +611,7 @@ description: Result of parsing car-wheel-assembly.kcl
               "unlabeled": null
             }
           ],
-          "commentStart": 564,
+          "commentStart": 577,
           "end": 0,
           "start": 0,
           "type": "PipeExpression",
@@ -622,14 +622,14 @@ description: Result of parsing car-wheel-assembly.kcl
         "type": "ExpressionStatement"
       },
       {
-        "commentStart": 617,
+        "commentStart": 630,
         "end": 0,
         "expression": {
           "abs_path": false,
-          "commentStart": 617,
+          "commentStart": 630,
           "end": 0,
           "name": {
-            "commentStart": 617,
+            "commentStart": 630,
             "end": 0,
             "name": "carTire",
             "start": 0,

rust/kcl-lib/tests/kcl_samples/car-wheel-assembly/ops.snap

@@ -7,8 +7,8 @@ description: Operations executed car-wheel-assembly.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
+          "type": "Plane",
-          "value": "XZ"
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }
@@ -1121,8 +1121,8 @@ description: Operations executed car-wheel-assembly.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
+          "type": "Plane",
-          "value": "XZ"
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }
@@ -1770,8 +1770,8 @@ description: Operations executed car-wheel-assembly.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
+          "type": "Plane",
-          "value": "XY"
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }
@@ -1808,8 +1808,8 @@ description: Operations executed car-wheel-assembly.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
+          "type": "Plane",
-          "value": "XY"
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }
@@ -1846,8 +1846,8 @@ description: Operations executed car-wheel-assembly.kcl
     "type": "UserDefinedFunctionCall",
     "name": "spoke",
     "functionSourceRange": [
-      2752,
+      2620,
-      4324,
+      4193,
       4
     ],
     "unlabeledArg": null,
@@ -2233,8 +2233,8 @@ description: Operations executed car-wheel-assembly.kcl
     "type": "UserDefinedFunctionCall",
     "name": "spoke",
     "functionSourceRange": [
-      2752,
+      2620,
-      4324,
+      4193,
       4
     ],
     "unlabeledArg": null,
@@ -2620,8 +2620,8 @@ description: Operations executed car-wheel-assembly.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
+          "type": "Plane",
-          "value": "XY"
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }
@@ -2658,8 +2658,8 @@ description: Operations executed car-wheel-assembly.kcl
     "type": "UserDefinedFunctionCall",
     "name": "lug",
     "functionSourceRange": [
-      666,
+      664,
-      1293,
+      1291,
       7
     ],
     "unlabeledArg": null,
@@ -3030,8 +3030,8 @@ description: Operations executed car-wheel-assembly.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
+          "type": "Plane",
-          "value": "XY"
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }
@@ -3084,8 +3084,8 @@ description: Operations executed car-wheel-assembly.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
+          "type": "Plane",
-          "value": "XY"
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }

rust/kcl-lib/tests/kcl_samples/color-cube/artifact_commands.snap

@@ -173,7 +173,7 @@ description: Artifact commands color-cube.kcl
         "z": 0.0
       },
       "x_axis": {
-        "x": -1.0,
+        "x": 1.0,
         "y": 0.0,
         "z": 0.0
       },
@@ -1619,9 +1619,9 @@ description: Artifact commands color-cube.kcl
       "animated": false,
       "adjust_camera": false,
       "planar_normal": {
-        "x": 0.0,
+        "x": -0.0,
         "y": 1.0,
-        "z": 0.0
+        "z": -0.0
       }
     }
   },
@@ -1738,9 +1738,9 @@ description: Artifact commands color-cube.kcl
       "animated": false,
       "adjust_camera": false,
       "planar_normal": {
-        "x": 0.0,
+        "x": -0.0,
         "y": 1.0,
-        "z": 0.0
+        "z": -0.0
       }
     }
   },

rust/kcl-lib/tests/kcl_samples/color-cube/artifact_graph_flowchart.snap.md

@@ -1,66 +1,66 @@
 ```mermaid
 flowchart LR
   subgraph path7 [Path]
-    7["Path<br>[778, 818, 0]"]
+    7["Path<br>[769, 809, 0]"]
-    8["Segment<br>[824, 871, 0]"]
+    8["Segment<br>[817, 864, 0]"]
-    9["Segment<br>[877, 977, 0]"]
+    9["Segment<br>[872, 978, 0]"]
-    10["Segment<br>[983, 1103, 0]"]
+    10["Segment<br>[986, 1112, 0]"]
-    11["Segment<br>[1109, 1165, 0]"]
+    11["Segment<br>[1120, 1176, 0]"]
-    12["Segment<br>[1171, 1178, 0]"]
+    12["Segment<br>[1184, 1191, 0]"]
     13[Solid2d]
   end
   subgraph path29 [Path]
-    29["Path<br>[778, 818, 0]"]
+    29["Path<br>[769, 809, 0]"]
-    30["Segment<br>[824, 871, 0]"]
+    30["Segment<br>[817, 864, 0]"]
-    31["Segment<br>[877, 977, 0]"]
+    31["Segment<br>[872, 978, 0]"]
-    32["Segment<br>[983, 1103, 0]"]
+    32["Segment<br>[986, 1112, 0]"]
-    33["Segment<br>[1109, 1165, 0]"]
+    33["Segment<br>[1120, 1176, 0]"]
-    34["Segment<br>[1171, 1178, 0]"]
+    34["Segment<br>[1184, 1191, 0]"]
     35[Solid2d]
   end
   subgraph path51 [Path]
-    51["Path<br>[778, 818, 0]"]
+    51["Path<br>[769, 809, 0]"]
-    52["Segment<br>[824, 871, 0]"]
+    52["Segment<br>[817, 864, 0]"]
-    53["Segment<br>[877, 977, 0]"]
+    53["Segment<br>[872, 978, 0]"]
-    54["Segment<br>[983, 1103, 0]"]
+    54["Segment<br>[986, 1112, 0]"]
-    55["Segment<br>[1109, 1165, 0]"]
+    55["Segment<br>[1120, 1176, 0]"]
-    56["Segment<br>[1171, 1178, 0]"]
+    56["Segment<br>[1184, 1191, 0]"]
     57[Solid2d]
   end
   subgraph path73 [Path]
-    73["Path<br>[778, 818, 0]"]
+    73["Path<br>[769, 809, 0]"]
-    74["Segment<br>[824, 871, 0]"]
+    74["Segment<br>[817, 864, 0]"]
-    75["Segment<br>[877, 977, 0]"]
+    75["Segment<br>[872, 978, 0]"]
-    76["Segment<br>[983, 1103, 0]"]
+    76["Segment<br>[986, 1112, 0]"]
-    77["Segment<br>[1109, 1165, 0]"]
+    77["Segment<br>[1120, 1176, 0]"]
-    78["Segment<br>[1171, 1178, 0]"]
+    78["Segment<br>[1184, 1191, 0]"]
     79[Solid2d]
   end
   subgraph path95 [Path]
-    95["Path<br>[778, 818, 0]"]
+    95["Path<br>[769, 809, 0]"]
-    96["Segment<br>[824, 871, 0]"]
+    96["Segment<br>[817, 864, 0]"]
-    97["Segment<br>[877, 977, 0]"]
+    97["Segment<br>[872, 978, 0]"]
-    98["Segment<br>[983, 1103, 0]"]
+    98["Segment<br>[986, 1112, 0]"]
-    99["Segment<br>[1109, 1165, 0]"]
+    99["Segment<br>[1120, 1176, 0]"]
-    100["Segment<br>[1171, 1178, 0]"]
+    100["Segment<br>[1184, 1191, 0]"]
     101[Solid2d]
   end
   subgraph path117 [Path]
-    117["Path<br>[778, 818, 0]"]
+    117["Path<br>[769, 809, 0]"]
-    118["Segment<br>[824, 871, 0]"]
+    118["Segment<br>[817, 864, 0]"]
-    119["Segment<br>[877, 977, 0]"]
+    119["Segment<br>[872, 978, 0]"]
-    120["Segment<br>[983, 1103, 0]"]
+    120["Segment<br>[986, 1112, 0]"]
-    121["Segment<br>[1109, 1165, 0]"]
+    121["Segment<br>[1120, 1176, 0]"]
-    122["Segment<br>[1171, 1178, 0]"]
+    122["Segment<br>[1184, 1191, 0]"]
     123[Solid2d]
   end
-  1["Plane<br>[350, 386, 0]"]
+  1["Plane<br>[352, 386, 0]"]
-  2["Plane<br>[401, 438, 0]"]
+  2["Plane<br>[401, 436, 0]"]
-  3["Plane<br>[452, 489, 0]"]
+  3["Plane<br>[450, 485, 0]"]
-  4["Plane<br>[504, 542, 0]"]
+  4["Plane<br>[500, 536, 0]"]
-  5["Plane<br>[554, 606, 0]"]
+  5["Plane<br>[548, 598, 0]"]
-  6["Plane<br>[619, 656, 0]"]
+  6["Plane<br>[611, 646, 0]"]
-  14["Sweep Extrusion<br>[1184, 1218, 0]"]
+  14["Sweep Extrusion<br>[1199, 1233, 0]"]
   15[Wall]
   16[Wall]
   17[Wall]
@@ -75,7 +75,7 @@ flowchart LR
   26["SweepEdge Adjacent"]
   27["SweepEdge Opposite"]
   28["SweepEdge Adjacent"]
-  36["Sweep Extrusion<br>[1184, 1218, 0]"]
+  36["Sweep Extrusion<br>[1199, 1233, 0]"]
   37[Wall]
   38[Wall]
   39[Wall]
@@ -90,7 +90,7 @@ flowchart LR
   48["SweepEdge Adjacent"]
   49["SweepEdge Opposite"]
   50["SweepEdge Adjacent"]
-  58["Sweep Extrusion<br>[1184, 1218, 0]"]
+  58["Sweep Extrusion<br>[1199, 1233, 0]"]
   59[Wall]
   60[Wall]
   61[Wall]
@@ -105,7 +105,7 @@ flowchart LR
   70["SweepEdge Adjacent"]
   71["SweepEdge Opposite"]
   72["SweepEdge Adjacent"]
-  80["Sweep Extrusion<br>[1184, 1218, 0]"]
+  80["Sweep Extrusion<br>[1199, 1233, 0]"]
   81[Wall]
   82[Wall]
   83[Wall]
@@ -120,7 +120,7 @@ flowchart LR
   92["SweepEdge Adjacent"]
   93["SweepEdge Opposite"]
   94["SweepEdge Adjacent"]
-  102["Sweep Extrusion<br>[1184, 1218, 0]"]
+  102["Sweep Extrusion<br>[1199, 1233, 0]"]
   103[Wall]
   104[Wall]
   105[Wall]
@@ -135,7 +135,7 @@ flowchart LR
   114["SweepEdge Adjacent"]
   115["SweepEdge Opposite"]
   116["SweepEdge Adjacent"]
-  124["Sweep Extrusion<br>[1184, 1218, 0]"]
+  124["Sweep Extrusion<br>[1199, 1233, 0]"]
   125[Wall]
   126[Wall]
   127[Wall]
@@ -328,18 +328,18 @@ flowchart LR
   117 --- 122
   117 ---- 124
   117 --- 123
-  118 --- 128
+  118 --- 125
-  118 --- 137
+  118 --- 131
-  118 --- 138
+  118 --- 132
-  119 --- 127
+  119 --- 126
-  119 --- 135
+  119 --- 133
-  119 --- 136
+  119 --- 134
-  120 --- 126
+  120 --- 127
-  120 --- 133
+  120 --- 135
-  120 --- 134
+  120 --- 136
-  121 --- 125
+  121 --- 128
-  121 --- 131
+  121 --- 137
-  121 --- 132
+  121 --- 138
   124 --- 125
   124 --- 126
   124 --- 127

rust/kcl-lib/tests/kcl_samples/color-cube/ops.snap

@@ -21,8 +21,8 @@ description: Operations executed color-cube.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "XY"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }
@@ -45,8 +45,8 @@ description: Operations executed color-cube.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "XY"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }
@@ -69,8 +69,8 @@ description: Operations executed color-cube.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "XZ"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }
@@ -93,8 +93,8 @@ description: Operations executed color-cube.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "-XZ"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }
@@ -117,8 +117,8 @@ description: Operations executed color-cube.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "YZ"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }
@@ -141,8 +141,8 @@ description: Operations executed color-cube.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "YZ"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }
@@ -151,8 +151,8 @@ description: Operations executed color-cube.kcl
     "type": "UserDefinedFunctionCall",
     "name": "sketchRectangle",
     "functionSourceRange": [
-      737,
+      726,
-      1309,
+      1326,
       0
     ],
     "unlabeledArg": null,
@@ -198,8 +198,8 @@ description: Operations executed color-cube.kcl
     "type": "UserDefinedFunctionCall",
     "name": "sketchRectangle",
     "functionSourceRange": [
-      737,
+      726,
-      1309,
+      1326,
       0
     ],
     "unlabeledArg": null,
@@ -245,8 +245,8 @@ description: Operations executed color-cube.kcl
     "type": "UserDefinedFunctionCall",
     "name": "sketchRectangle",
     "functionSourceRange": [
-      737,
+      726,
-      1309,
+      1326,
       0
     ],
     "unlabeledArg": null,
@@ -292,8 +292,8 @@ description: Operations executed color-cube.kcl
     "type": "UserDefinedFunctionCall",
     "name": "sketchRectangle",
     "functionSourceRange": [
-      737,
+      726,
-      1309,
+      1326,
       0
     ],
     "unlabeledArg": null,
@@ -339,8 +339,8 @@ description: Operations executed color-cube.kcl
     "type": "UserDefinedFunctionCall",
     "name": "sketchRectangle",
     "functionSourceRange": [
-      737,
+      726,
-      1309,
+      1326,
       0
     ],
     "unlabeledArg": null,
@@ -386,8 +386,8 @@ description: Operations executed color-cube.kcl
     "type": "UserDefinedFunctionCall",
     "name": "sketchRectangle",
     "functionSourceRange": [
-      737,
+      726,
-      1309,
+      1326,
       0
     ],
     "unlabeledArg": null,

rust/kcl-lib/tests/kcl_samples/color-cube/program_memory.snap

@@ -110,7 +110,7 @@ description: Variables in memory after executing color-cube.kcl
         "z": 0.0
       },
       "xAxis": {
-        "x": -1.0,
+        "x": 1.0,
         "y": 0.0,
         "z": 0.0
       },
@@ -120,9 +120,9 @@ description: Variables in memory after executing color-cube.kcl
         "z": 1.0
       },
       "zAxis": {
-        "x": 0.0,
+        "x": -0.0,
         "y": 1.0,
-        "z": 0.0
+        "z": -0.0
       },
       "units": {
         "type": "Mm"

rust/kcl-lib/tests/kcl_samples/cycloidal-gear/artifact_graph_flowchart.snap.md

@@ -1,57 +1,57 @@
 ```mermaid
 flowchart LR
   subgraph path2 [Path]
-    2["Path<br>[590, 824, 0]"]
+    2["Path<br>[587, 821, 0]"]
-    3["Segment<br>[834, 967, 0]"]
+    3["Segment<br>[831, 964, 0]"]
-    4["Segment<br>[977, 1068, 0]"]
+    4["Segment<br>[974, 1065, 0]"]
-    5["Segment<br>[1078, 1133, 0]"]
+    5["Segment<br>[1075, 1130, 0]"]
-    6["Segment<br>[1143, 1234, 0]"]
+    6["Segment<br>[1140, 1231, 0]"]
-    7["Segment<br>[1244, 1299, 0]"]
+    7["Segment<br>[1241, 1296, 0]"]
-    8["Segment<br>[1309, 1365, 0]"]
+    8["Segment<br>[1306, 1362, 0]"]
-    9["Segment<br>[1375, 1383, 0]"]
+    9["Segment<br>[1372, 1380, 0]"]
     10[Solid2d]
   end
   subgraph path11 [Path]
-    11["Path<br>[1398, 1481, 0]"]
+    11["Path<br>[1395, 1445, 0]"]
-    12["Segment<br>[1398, 1481, 0]"]
+    12["Segment<br>[1395, 1445, 0]"]
     13[Solid2d]
   end
   subgraph path15 [Path]
-    15["Path<br>[590, 824, 0]"]
+    15["Path<br>[587, 821, 0]"]
-    16["Segment<br>[834, 967, 0]"]
+    16["Segment<br>[831, 964, 0]"]
-    17["Segment<br>[977, 1068, 0]"]
+    17["Segment<br>[974, 1065, 0]"]
-    18["Segment<br>[1078, 1133, 0]"]
+    18["Segment<br>[1075, 1130, 0]"]
-    19["Segment<br>[1143, 1234, 0]"]
+    19["Segment<br>[1140, 1231, 0]"]
-    20["Segment<br>[1244, 1299, 0]"]
+    20["Segment<br>[1241, 1296, 0]"]
-    21["Segment<br>[1309, 1365, 0]"]
+    21["Segment<br>[1306, 1362, 0]"]
-    22["Segment<br>[1375, 1383, 0]"]
+    22["Segment<br>[1372, 1380, 0]"]
     23[Solid2d]
   end
   subgraph path24 [Path]
-    24["Path<br>[1398, 1481, 0]"]
+    24["Path<br>[1395, 1445, 0]"]
-    25["Segment<br>[1398, 1481, 0]"]
+    25["Segment<br>[1395, 1445, 0]"]
     26[Solid2d]
   end
   subgraph path28 [Path]
-    28["Path<br>[590, 824, 0]"]
+    28["Path<br>[587, 821, 0]"]
-    35["Segment<br>[1375, 1383, 0]"]
+    35["Segment<br>[1372, 1380, 0]"]
     36[Solid2d]
   end
   subgraph path37 [Path]
-    37["Path<br>[1398, 1481, 0]"]
+    37["Path<br>[1395, 1445, 0]"]
-    38["Segment<br>[1398, 1481, 0]"]
+    38["Segment<br>[1395, 1445, 0]"]
     39[Solid2d]
   end
-  1["Plane<br>[544, 579, 0]"]
+  1["Plane<br>[543, 576, 0]"]
-  14["Plane<br>[544, 579, 0]"]
+  14["Plane<br>[543, 576, 0]"]
-  27["Plane<br>[544, 579, 0]"]
+  27["Plane<br>[543, 576, 0]"]
   29["SweepEdge Opposite"]
   30["SweepEdge Opposite"]
   31["SweepEdge Opposite"]
   32["SweepEdge Opposite"]
   33["SweepEdge Opposite"]
   34["SweepEdge Opposite"]
-  40["Sweep Loft<br>[1611, 1700, 0]"]
+  40["Sweep Loft<br>[1575, 1664, 0]"]
   41[Wall]
   42[Wall]
   43[Wall]
@@ -66,9 +66,9 @@ flowchart LR
   52["SweepEdge Adjacent"]
   53["SweepEdge Adjacent"]
   54["SweepEdge Adjacent"]
-  55["StartSketchOnPlane<br>[530, 580, 0]"]
+  55["StartSketchOnPlane<br>[529, 577, 0]"]
-  56["StartSketchOnPlane<br>[530, 580, 0]"]
+  56["StartSketchOnPlane<br>[529, 577, 0]"]
-  57["StartSketchOnPlane<br>[530, 580, 0]"]
+  57["StartSketchOnPlane<br>[529, 577, 0]"]
   1 --- 2
   1 --- 11
   2 --- 3

rust/kcl-lib/tests/kcl_samples/cycloidal-gear/ops.snap

@@ -7,8 +7,8 @@ description: Operations executed cycloidal-gear.kcl
     "type": "UserDefinedFunctionCall",
     "name": "cycloidalGear",
     "functionSourceRange": [
-      222,
+      221,
-      1721,
+      1685,
       0
     ],
     "unlabeledArg": null,
@@ -19,8 +19,8 @@ description: Operations executed cycloidal-gear.kcl
     "type": "UserDefinedFunctionCall",
     "name": "gearSketch",
     "functionSourceRange": [
-      448,
+      447,
-      1512,
+      1476,
       0
     ],
     "unlabeledArg": null,
@@ -51,8 +51,8 @@ description: Operations executed cycloidal-gear.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "XY"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }
@@ -225,8 +225,8 @@ description: Operations executed cycloidal-gear.kcl
     "type": "UserDefinedFunctionCall",
     "name": "gearSketch",
     "functionSourceRange": [
-      448,
+      447,
-      1512,
+      1476,
       0
     ],
     "unlabeledArg": null,
@@ -251,8 +251,8 @@ description: Operations executed cycloidal-gear.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "XY"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }
@@ -425,8 +425,8 @@ description: Operations executed cycloidal-gear.kcl
     "type": "UserDefinedFunctionCall",
     "name": "gearSketch",
     "functionSourceRange": [
-      448,
+      447,
-      1512,
+      1476,
       0
     ],
     "unlabeledArg": null,
@@ -457,8 +457,8 @@ description: Operations executed cycloidal-gear.kcl
     "type": "StdLibCall",
     "unlabeledArg": {
       "value": {
-        "type": "String",
+        "type": "Plane",
-        "value": "XY"
+        "artifact_id": "[uuid]"
       },
       "sourceRange": []
     }

rust/kcl-lib/tests/kcl_samples/dodecahedron/artifact_graph_flowchart.snap.md

@@ -1,28 +1,28 @@
 ```mermaid
 flowchart LR
   subgraph path2 [Path]
-    2["Path<br>[1164, 1276, 0]"]
+    2["Path<br>[1162, 1274, 0]"]
-    3["Segment<br>[1164, 1276, 0]"]
+    3["Segment<br>[1162, 1274, 0]"]
-    4["Segment<br>[1164, 1276, 0]"]
+    4["Segment<br>[1162, 1274, 0]"]
-    5["Segment<br>[1164, 1276, 0]"]
+    5["Segment<br>[1162, 1274, 0]"]
-    6["Segment<br>[1164, 1276, 0]"]
+    6["Segment<br>[1162, 1274, 0]"]
-    7["Segment<br>[1164, 1276, 0]"]
+    7["Segment<br>[1162, 1274, 0]"]
-    8["Segment<br>[1164, 1276, 0]"]
+    8["Segment<br>[1162, 1274, 0]"]
     9[Solid2d]
   end
   subgraph path11 [Path]
-    11["Path<br>[1321, 1433, 0]"]
+    11["Path<br>[1319, 1431, 0]"]
-    12["Segment<br>[1321, 1433, 0]"]
+    12["Segment<br>[1319, 1431, 0]"]
-    13["Segment<br>[1321, 1433, 0]"]
+    13["Segment<br>[1319, 1431, 0]"]
-    14["Segment<br>[1321, 1433, 0]"]
+    14["Segment<br>[1319, 1431, 0]"]
-    15["Segment<br>[1321, 1433, 0]"]
+    15["Segment<br>[1319, 1431, 0]"]
-    16["Segment<br>[1321, 1433, 0]"]
+    16["Segment<br>[1319, 1431, 0]"]
-    17["Segment<br>[1321, 1433, 0]"]
+    17["Segment<br>[1319, 1431, 0]"]
     18[Solid2d]
   end
-  1["Plane<br>[1139, 1158, 0]"]
+  1["Plane<br>[1139, 1156, 0]"]
-  10["Plane<br>[1295, 1315, 0]"]
+  10["Plane<br>[1293, 1313, 0]"]
-  19["Sweep Extrusion<br>[1479, 1522, 0]"]
+  19["Sweep Extrusion<br>[1477, 1520, 0]"]
   20[Wall]
   21[Wall]
   22[Wall]
@@ -40,7 +40,7 @@ flowchart LR
   34["SweepEdge Adjacent"]
   35["SweepEdge Opposite"]
   36["SweepEdge Adjacent"]
-  37["Sweep Extrusion<br>[1536, 1583, 0]"]
+  37["Sweep Extrusion<br>[1534, 1581, 0]"]
   38[Wall]
   39[Wall]
   40[Wall]

rust/kcl-lib/tests/kcl_samples/dodecahedron/ast.snap

@@ -1387,13 +1387,20 @@ description: Result of parsing dodecahedron.kcl
               {
                 "arguments": [
                   {
+                    "abs_path": false,
                     "commentStart": 1153,
                     "end": 0,
-                    "raw": "'XY'",
+                    "name": {
+                      "commentStart": 1153,
+                      "end": 0,
+                      "name": "XY",
+                      "start": 0,
+                      "type": "Identifier"
+                    },
+                    "path": [],
                     "start": 0,
-                    "type": "Literal",
+                    "type": "Name",
-                    "type": "Literal",
+                    "type": "Name"
-                    "value": "XY"
                   }
                 ],
                 "callee": {
@@ -1420,14 +1427,14 @@ description: Result of parsing dodecahedron.kcl
               {
                 "arguments": [
                   {
-                    "commentStart": 1172,
+                    "commentStart": 1170,
                     "end": 0,
                     "properties": [
                       {
-                        "commentStart": 1181,
+                        "commentStart": 1179,
                         "end": 0,
                         "key": {
-                          "commentStart": 1181,
+                          "commentStart": 1179,
                           "end": 0,
                           "name": "radius",
                           "start": 0,
@@ -1437,10 +1444,10 @@ description: Result of parsing dodecahedron.kcl
                         "type": "ObjectProperty",
                         "value": {
                           "abs_path": false,
-                          "commentStart": 1190,
+                          "commentStart": 1188,
                           "end": 0,
                           "name": {
-                            "commentStart": 1190,
+                            "commentStart": 1188,
                             "end": 0,
                             "name": "pentR",
                             "start": 0,
@@ -1453,10 +1460,10 @@ description: Result of parsing dodecahedron.kcl
                         }
                       },
                       {
-                        "commentStart": 1204,
+                        "commentStart": 1202,
                         "end": 0,
                         "key": {
-                          "commentStart": 1204,
+                          "commentStart": 1202,
                           "end": 0,
                           "name": "numSides",
                           "start": 0,
@@ -1465,7 +1472,7 @@ description: Result of parsing dodecahedron.kcl
                         "start": 0,
                         "type": "ObjectProperty",
                         "value": {
-                          "commentStart": 1215,
+                          "commentStart": 1213,
                           "end": 0,
                           "raw": "5",
                           "start": 0,
@@ -1478,10 +1485,10 @@ description: Result of parsing dodecahedron.kcl
                         }
                       },
                       {
-                        "commentStart": 1225,
+                        "commentStart": 1223,
                         "end": 0,
                         "key": {
-                          "commentStart": 1225,
+                          "commentStart": 1223,
                           "end": 0,
                           "name": "center",
                           "start": 0,
@@ -1490,10 +1497,10 @@ description: Result of parsing dodecahedron.kcl
                         "start": 0,
                         "type": "ObjectProperty",
                         "value": {
-                          "commentStart": 1234,
+                          "commentStart": 1232,
                           "elements": [
                             {
-                              "commentStart": 1235,
+                              "commentStart": 1233,
                               "end": 0,
                               "raw": "0",
                               "start": 0,
@@ -1505,7 +1512,7 @@ description: Result of parsing dodecahedron.kcl
                               }
                             },
                             {
-                              "commentStart": 1238,
+                              "commentStart": 1236,
                               "end": 0,
                               "raw": "0",
                               "start": 0,
@@ -1524,10 +1531,10 @@ description: Result of parsing dodecahedron.kcl
                         }
                       },
                       {
-                        "commentStart": 1249,
+                        "commentStart": 1247,
                         "end": 0,
                         "key": {
-                          "commentStart": 1249,
+                          "commentStart": 1247,
                           "end": 0,
                           "name": "inscribed",
                           "start": 0,
@@ -1536,7 +1543,7 @@ description: Result of parsing dodecahedron.kcl
                         "start": 0,
                         "type": "ObjectProperty",
                         "value": {
-                          "commentStart": 1261,
+                          "commentStart": 1259,
                           "end": 0,
                           "raw": "true",
                           "start": 0,
@@ -1551,7 +1558,7 @@ description: Result of parsing dodecahedron.kcl
                     "type": "ObjectExpression"
                   },
                   {
-                    "commentStart": 1274,
+                    "commentStart": 1272,
                     "end": 0,
                     "start": 0,
                     "type": "PipeSubstitution",
@@ -1560,10 +1567,10 @@ description: Result of parsing dodecahedron.kcl
                 ],
                 "callee": {
                   "abs_path": false,
-                  "commentStart": 1164,
+                  "commentStart": 1162,
                   "end": 0,
                   "name": {
-                    "commentStart": 1164,
+                    "commentStart": 1162,
                     "end": 0,
                     "name": "polygon",
                     "start": 0,
@@ -1573,7 +1580,7 @@ description: Result of parsing dodecahedron.kcl
                   "start": 0,
                   "type": "Name"
                 },
-                "commentStart": 1164,
+                "commentStart": 1162,
                 "end": 0,
                 "start": 0,
                 "type": "CallExpression",
@@ -1601,12 +1608,12 @@ description: Result of parsing dodecahedron.kcl
         "type": "VariableDeclaration"
       },
       {
-        "commentStart": 1276,
+        "commentStart": 1274,
         "declaration": {
-          "commentStart": 1278,
+          "commentStart": 1276,
           "end": 0,
           "id": {
-            "commentStart": 1278,
+            "commentStart": 1276,
             "end": 0,
             "name": "bottomSideFace",
             "start": 0,
@@ -1618,10 +1625,10 @@ description: Result of parsing dodecahedron.kcl
                 "arguments": [
                   {
                     "abs_path": false,
-                    "commentStart": 1309,
+                    "commentStart": 1307,
                     "end": 0,
                     "name": {
-                      "commentStart": 1309,
+                      "commentStart": 1307,
                       "end": 0,
                       "name": "plane",
                       "start": 0,
@@ -1635,10 +1642,10 @@ description: Result of parsing dodecahedron.kcl
                 ],
                 "callee": {
                   "abs_path": false,
-                  "commentStart": 1295,
+                  "commentStart": 1293,
                   "end": 0,
                   "name": {
-                    "commentStart": 1295,
+                    "commentStart": 1293,
                     "end": 0,
                     "name": "startSketchOn",
                     "start": 0,
@@ -1648,7 +1655,7 @@ description: Result of parsing dodecahedron.kcl
                   "start": 0,
                   "type": "Name"
                 },
-                "commentStart": 1295,
+                "commentStart": 1293,
                 "end": 0,
                 "start": 0,
                 "type": "CallExpression",
@@ -1657,14 +1664,14 @@ description: Result of parsing dodecahedron.kcl
               {
                 "arguments": [
                   {
-                    "commentStart": 1329,
+                    "commentStart": 1327,
                     "end": 0,
                     "properties": [
                       {
-                        "commentStart": 1338,
+                        "commentStart": 1336,
                         "end": 0,
                         "key": {
-                          "commentStart": 1338,
+                          "commentStart": 1336,
                           "end": 0,
                           "name": "radius",
                           "start": 0,
@@ -1674,10 +1681,10 @@ description: Result of parsing dodecahedron.kcl
                         "type": "ObjectProperty",
                         "value": {
                           "abs_path": false,
-                          "commentStart": 1347,
+                          "commentStart": 1345,
                           "end": 0,
                           "name": {
-                            "commentStart": 1347,
+                            "commentStart": 1345,
                             "end": 0,
                             "name": "pentR",
                             "start": 0,
@@ -1690,10 +1697,10 @@ description: Result of parsing dodecahedron.kcl
                         }
                       },
                       {
-                        "commentStart": 1361,
+                        "commentStart": 1359,
                         "end": 0,
                         "key": {
-                          "commentStart": 1361,
+                          "commentStart": 1359,
                           "end": 0,
                           "name": "numSides",
                           "start": 0,
@@ -1702,7 +1709,7 @@ description: Result of parsing dodecahedron.kcl
                         "start": 0,
                         "type": "ObjectProperty",
                         "value": {
-                          "commentStart": 1372,
+                          "commentStart": 1370,
                           "end": 0,
                           "raw": "5",
                           "start": 0,
@@ -1715,10 +1722,10 @@ description: Result of parsing dodecahedron.kcl
                         }
                       },
                       {
-                        "commentStart": 1382,
+                        "commentStart": 1380,
                         "end": 0,
                         "key": {
-                          "commentStart": 1382,
+                          "commentStart": 1380,
                           "end": 0,
                           "name": "center",
                           "start": 0,
@@ -1727,10 +1734,10 @@ description: Result of parsing dodecahedron.kcl
                         "start": 0,
                         "type": "ObjectProperty",
                         "value": {
-                          "commentStart": 1391,
+                          "commentStart": 1389,
                           "elements": [
                             {
-                              "commentStart": 1392,
+                              "commentStart": 1390,
                               "end": 0,
                               "raw": "0",
                               "start": 0,
@@ -1742,7 +1749,7 @@ description: Result of parsing dodecahedron.kcl
                               }
                             },
                             {
-                              "commentStart": 1395,
+                              "commentStart": 1393,
                               "end": 0,
                               "raw": "0",
                               "start": 0,
@@ -1761,10 +1768,10 @@ description: Result of parsing dodecahedron.kcl
                         }
                       },
                       {
-                        "commentStart": 1406,
+                        "commentStart": 1404,
                         "end": 0,
                         "key": {
-                          "commentStart": 1406,
+                          "commentStart": 1404,
                           "end": 0,
                           "name": "inscribed",
                           "start": 0,
@@ -1773,7 +1780,7 @@ description: Result of parsing dodecahedron.kcl
                         "start": 0,
                         "type": "ObjectProperty",
                         "value": {
-                          "commentStart": 1418,
+                          "commentStart": 1416,
                           "end": 0,
                           "raw": "true",
                           "start": 0,
@@ -1788,7 +1795,7 @@ description: Result of parsing dodecahedron.kcl
                     "type": "ObjectExpression"
                   },
                   {
-                    "commentStart": 1431,
+                    "commentStart": 1429,
                     "end": 0,
                     "start": 0,
                     "type": "PipeSubstitution",
@@ -1797,10 +1804,10 @@ description: Result of parsing dodecahedron.kcl
                 ],
                 "callee": {
                   "abs_path": false,
-                  "commentStart": 1321,
+                  "commentStart": 1319,
                   "end": 0,
                   "name": {
-                    "commentStart": 1321,
+                    "commentStart": 1319,
                     "end": 0,
                     "name": "polygon",
                     "start": 0,
@@ -1810,20 +1817,20 @@ description: Result of parsing dodecahedron.kcl
                   "start": 0,
                   "type": "Name"
                 },
-                "commentStart": 1321,
+                "commentStart": 1319,
                 "end": 0,
                 "start": 0,
                 "type": "CallExpression",
                 "type": "CallExpression"
               }
             ],
-            "commentStart": 1295,
+            "commentStart": 1293,
             "end": 0,
             "nonCodeMeta": {
               "nonCodeNodes": {
                 "1": [
                   {
-                    "commentStart": 1433,
+                    "commentStart": 1431,
                     "end": 0,
                     "start": 0,
                     "type": "NonCodeNode",
@@ -1851,12 +1858,12 @@ description: Result of parsing dodecahedron.kcl
         "type": "VariableDeclaration"
       },
       {
-        "commentStart": 1470,
+        "commentStart": 1468,
         "declaration": {
-          "commentStart": 1470,
+          "commentStart": 1468,
           "end": 0,
           "id": {
-            "commentStart": 1470,
+            "commentStart": 1468,
             "end": 0,
             "name": "bottom",
             "start": 0,
@@ -1867,7 +1874,7 @@ description: Result of parsing dodecahedron.kcl
               {
                 "type": "LabeledArg",
                 "label": {
-                  "commentStart": 1499,
+                  "commentStart": 1497,
                   "end": 0,
                   "name": "length",
                   "start": 0,
@@ -1875,10 +1882,10 @@ description: Result of parsing dodecahedron.kcl
                 },
                 "arg": {
                   "abs_path": false,
-                  "commentStart": 1508,
+                  "commentStart": 1506,
                   "end": 0,
                   "name": {
-                    "commentStart": 1508,
+                    "commentStart": 1506,
                     "end": 0,
                     "name": "wallThickness",
                     "start": 0,
@@ -1893,10 +1900,10 @@ description: Result of parsing dodecahedron.kcl
             ],
             "callee": {
               "abs_path": false,
-              "commentStart": 1479,
+              "commentStart": 1477,
               "end": 0,
               "name": {
-                "commentStart": 1479,
+                "commentStart": 1477,
                 "end": 0,
                 "name": "extrude",
                 "start": 0,
@@ -1906,17 +1913,17 @@ description: Result of parsing dodecahedron.kcl
               "start": 0,
               "type": "Name"
             },
-            "commentStart": 1479,
+            "commentStart": 1477,
             "end": 0,
             "start": 0,
             "type": "CallExpressionKw",
             "type": "CallExpressionKw",
             "unlabeled": {
               "abs_path": false,
-              "commentStart": 1487,
+              "commentStart": 1485,
               "end": 0,
               "name": {
-                "commentStart": 1487,
+                "commentStart": 1485,
                 "end": 0,
                 "name": "bottomFace",
                 "start": 0,
@@ -1938,12 +1945,12 @@ description: Result of parsing dodecahedron.kcl
         "type": "VariableDeclaration"
       },
       {
-        "commentStart": 1523,
+        "commentStart": 1521,
         "declaration": {
-          "commentStart": 1523,
+          "commentStart": 1521,
           "end": 0,
           "id": {
-            "commentStart": 1523,
+            "commentStart": 1521,
             "end": 0,
             "name": "bottomSide",
             "start": 0,
@@ -1954,7 +1961,7 @@ description: Result of parsing dodecahedron.kcl
               {
                 "type": "LabeledArg",
                 "label": {
-                  "commentStart": 1560,
+                  "commentStart": 1558,
                   "end": 0,
                   "name": "length",
                   "start": 0,
@@ -1962,10 +1969,10 @@ description: Result of parsing dodecahedron.kcl
                 },
                 "arg": {
                   "abs_path": false,
-                  "commentStart": 1569,
+                  "commentStart": 1567,
                   "end": 0,
                   "name": {
-                    "commentStart": 1569,
+                    "commentStart": 1567,
                     "end": 0,
                     "name": "wallThickness",
                     "start": 0,
@@ -1980,10 +1987,10 @@ description: Result of parsing dodecahedron.kcl
             ],
             "callee": {
               "abs_path": false,
-              "commentStart": 1536,
+              "commentStart": 1534,
               "end": 0,
               "name": {
-                "commentStart": 1536,
+                "commentStart": 1534,
                 "end": 0,
                 "name": "extrude",
                 "start": 0,
@@ -1993,17 +2000,17 @@ description: Result of parsing dodecahedron.kcl
               "start": 0,
               "type": "Name"
             },
-            "commentStart": 1536,
+            "commentStart": 1534,
             "end": 0,
             "start": 0,
             "type": "CallExpressionKw",
             "type": "CallExpressionKw",
             "unlabeled": {
               "abs_path": false,
-              "commentStart": 1544,
+              "commentStart": 1542,
               "end": 0,
               "name": {
-                "commentStart": 1544,
+                "commentStart": 1542,
                 "end": 0,
                 "name": "bottomSideFace",
                 "start": 0,
@@ -2025,12 +2032,12 @@ description: Result of parsing dodecahedron.kcl
         "type": "VariableDeclaration"
       },
       {
-        "commentStart": 1583,
+        "commentStart": 1581,
         "declaration": {
-          "commentStart": 1637,
+          "commentStart": 1635,
           "end": 0,
           "id": {
-            "commentStart": 1637,
+            "commentStart": 1635,
             "end": 0,
             "name": "bottomBowl",
             "start": 0,
@@ -2041,14 +2048,14 @@ description: Result of parsing dodecahedron.kcl
               {
                 "type": "LabeledArg",
                 "label": {
-                  "commentStart": 1685,
+                  "commentStart": 1683,
                   "end": 0,
                   "name": "instances",
                   "start": 0,
                   "type": "Identifier"
                 },
                 "arg": {
-                  "commentStart": 1697,
+                  "commentStart": 1695,
                   "end": 0,
                   "raw": "5",
                   "start": 0,
@@ -2063,17 +2070,17 @@ description: Result of parsing dodecahedron.kcl
               {
                 "type": "LabeledArg",
                 "label": {
-                  "commentStart": 1702,
+                  "commentStart": 1700,
                   "end": 0,
                   "name": "axis",
                   "start": 0,
                   "type": "Identifier"
                 },
                 "arg": {
-                  "commentStart": 1709,
+                  "commentStart": 1707,
                   "elements": [
                     {
-                      "commentStart": 1710,
+                      "commentStart": 1708,
                       "end": 0,
                       "raw": "0",
                       "start": 0,
@@ -2085,7 +2092,7 @@ description: Result of parsing dodecahedron.kcl
                       }
                     },
                     {
-                      "commentStart": 1713,
+                      "commentStart": 1711,
                       "end": 0,
                       "raw": "0",
                       "start": 0,
@@ -2097,7 +2104,7 @@ description: Result of parsing dodecahedron.kcl
                       }
                     },
                     {
-                      "commentStart": 1716,
+                      "commentStart": 1714,
                       "end": 0,
                       "raw": "1",
                       "start": 0,
@@ -2118,17 +2125,17 @@ description: Result of parsing dodecahedron.kcl
               {
                 "type": "LabeledArg",
                 "label": {
-                  "commentStart": 1722,
+                  "commentStart": 1720,
                   "end": 0,
                   "name": "center",
                   "start": 0,
                   "type": "Identifier"
                 },
                 "arg": {
-                  "commentStart": 1731,
+                  "commentStart": 1729,
                   "elements": [
                     {
-                      "commentStart": 1732,
+                      "commentStart": 1730,
                       "end": 0,
                       "raw": "0",
                       "start": 0,
@@ -2140,7 +2147,7 @@ description: Result of parsing dodecahedron.kcl
                       }
                     },
                     {
-                      "commentStart": 1735,
+                      "commentStart": 1733,
                       "end": 0,
                       "raw": "0",
                       "start": 0,
@@ -2152,7 +2159,7 @@ description: Result of parsing dodecahedron.kcl
                       }
                     },
                     {
-                      "commentStart": 1738,
+                      "commentStart": 1736,
                       "end": 0,
                       "raw": "0",
                       "start": 0,
@@ -2173,14 +2180,14 @@ description: Result of parsing dodecahedron.kcl
               {
                 "type": "LabeledArg",
                 "label": {
-                  "commentStart": 1744,
+                  "commentStart": 1742,
                   "end": 0,
                   "name": "arcDegrees",
                   "start": 0,
                   "type": "Identifier"
                 },
                 "arg": {
-                  "commentStart": 1757,
+                  "commentStart": 1755,
                   "end": 0,
                   "raw": "360",
                   "start": 0,
@@ -2195,14 +2202,14 @@ description: Result of parsing dodecahedron.kcl
               {
                 "type": "LabeledArg",
                 "label": {
-                  "commentStart": 1764,
+                  "commentStart": 1762,
                   "end": 0,
                   "name": "rotateDuplicates",
                   "start": 0,
                   "type": "Identifier"
                 },
                 "arg": {
-                  "commentStart": 1783,
+                  "commentStart": 1781,
                   "end": 0,
                   "raw": "true",
                   "start": 0,
@@ -2214,10 +2221,10 @@ description: Result of parsing dodecahedron.kcl
             ],
             "callee": {
               "abs_path": false,
-              "commentStart": 1650,
+              "commentStart": 1648,
               "end": 0,
               "name": {
-                "commentStart": 1650,
+                "commentStart": 1648,
                 "end": 0,
                 "name": "patternCircular3d",
                 "start": 0,
@@ -2227,17 +2234,17 @@ description: Result of parsing dodecahedron.kcl
               "start": 0,
               "type": "Name"
             },
-            "commentStart": 1650,
+            "commentStart": 1648,
             "end": 0,
             "start": 0,
             "type": "CallExpressionKw",
             "type": "CallExpressionKw",
             "unlabeled": {
               "abs_path": false,
-              "commentStart": 1671,
+              "commentStart": 1669,
               "end": 0,
               "name": {
-                "commentStart": 1671,
+                "commentStart": 1669,
                 "end": 0,
                 "name": "bottomSide",
                 "start": 0,
@@ -2264,21 +2271,21 @@ description: Result of parsing dodecahedron.kcl
         "type": "VariableDeclaration"
       },
       {
-        "commentStart": 1789,
+        "commentStart": 1788,
         "end": 0,
         "expression": {
           "arguments": [
             {
               "type": "LabeledArg",
               "label": {
-                "commentStart": 1867,
+                "commentStart": 1866,
                 "end": 0,
                 "name": "instances",
                 "start": 0,
                 "type": "Identifier"
               },
               "arg": {
-                "commentStart": 1879,
+                "commentStart": 1878,
                 "end": 0,
                 "raw": "2",
                 "start": 0,
@@ -2293,17 +2300,17 @@ description: Result of parsing dodecahedron.kcl
             {
               "type": "LabeledArg",
               "label": {
-                "commentStart": 1884,
+                "commentStart": 1883,
                 "end": 0,
                 "name": "axis",
                 "start": 0,
                 "type": "Identifier"
               },
               "arg": {
-                "commentStart": 1891,
+                "commentStart": 1890,
                 "elements": [
                   {
-                    "commentStart": 1892,
+                    "commentStart": 1891,
                     "end": 0,
                     "raw": "0",
                     "start": 0,
@@ -2315,7 +2322,7 @@ description: Result of parsing dodecahedron.kcl
                     }
                   },
                   {
-                    "commentStart": 1895,
+                    "commentStart": 1894,
                     "end": 0,
                     "raw": "1",
                     "start": 0,
@@ -2327,7 +2334,7 @@ description: Result of parsing dodecahedron.kcl
                     }
                   },
                   {
-                    "commentStart": 1898,
+                    "commentStart": 1897,
                     "end": 0,
                     "raw": "0",
                     "start": 0,
@@ -2348,17 +2355,17 @@ description: Result of parsing dodecahedron.kcl
             {
               "type": "LabeledArg",
               "label": {
-                "commentStart": 1904,
+                "commentStart": 1903,
                 "end": 0,
                 "name": "center",
                 "start": 0,
                 "type": "Identifier"
               },
               "arg": {
-                "commentStart": 1913,
+                "commentStart": 1912,
                 "elements": [
                   {
-                    "commentStart": 1914,
+                    "commentStart": 1913,
                     "end": 0,
                     "raw": "0",
                     "start": 0,
@@ -2370,7 +2377,7 @@ description: Result of parsing dodecahedron.kcl
                     }
                   },
                   {
-                    "commentStart": 1917,
+                    "commentStart": 1916,
                     "end": 0,
                     "raw": "0",
                     "start": 0,
@@ -2383,10 +2390,10 @@ description: Result of parsing dodecahedron.kcl
                   },
                   {
                     "abs_path": false,
-                    "commentStart": 1920,
+                    "commentStart": 1919,
                     "end": 0,
                     "name": {
-                      "commentStart": 1920,
+                      "commentStart": 1919,
                       "end": 0,
                       "name": "inscR",
                       "start": 0,
@@ -2407,14 +2414,14 @@ description: Result of parsing dodecahedron.kcl
             {
               "type": "LabeledArg",
               "label": {
-                "commentStart": 1930,
+                "commentStart": 1929,
                 "end": 0,
                 "name": "arcDegrees",
                 "start": 0,
                 "type": "Identifier"
               },
               "arg": {
-                "commentStart": 1943,
+                "commentStart": 1942,
                 "end": 0,
                 "raw": "360",
                 "start": 0,
@@ -2429,14 +2436,14 @@ description: Result of parsing dodecahedron.kcl
             {
               "type": "LabeledArg",
               "label": {
-                "commentStart": 1950,
+                "commentStart": 1949,
                 "end": 0,
                 "name": "rotateDuplicates",
                 "start": 0,
                 "type": "Identifier"
               },
               "arg": {
-                "commentStart": 1969,
+                "commentStart": 1968,
                 "end": 0,
                 "raw": "true",
                 "start": 0,
@@ -2448,10 +2455,10 @@ description: Result of parsing dodecahedron.kcl
           ],
           "callee": {
             "abs_path": false,
-            "commentStart": 1836,
+            "commentStart": 1835,
             "end": 0,
             "name": {
-              "commentStart": 1836,
+              "commentStart": 1835,
               "end": 0,
               "name": "patternCircular3d",
               "start": 0,
@@ -2461,17 +2468,17 @@ description: Result of parsing dodecahedron.kcl
             "start": 0,
             "type": "Name"
           },
-          "commentStart": 1836,
+          "commentStart": 1835,
           "end": 0,
           "start": 0,
           "type": "CallExpressionKw",
           "type": "CallExpressionKw",
           "unlabeled": {
             "abs_path": false,
-            "commentStart": 1857,
+            "commentStart": 1856,
             "end": 0,
             "name": {
-              "commentStart": 1857,
+              "commentStart": 1856,
               "end": 0,
               "name": "bottom",
               "start": 0,
@@ -2781,7 +2788,7 @@ description: Result of parsing dodecahedron.kcl
       "nonCodeNodes": {
         "7": [
           {
-            "commentStart": 1276,
+            "commentStart": 1274,
             "end": 0,
             "start": 0,
             "type": "NonCodeNode",

rust/kcl-lib/tests/kcl_samples/dodecahedron/ops.snap

@@ -112,8 +112,8 @@ description: Operations executed dodecahedron.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
+          "type": "Plane",
-          "value": "XY"
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }

rust/kcl-lib/tests/kcl_samples/enclosure/artifact_graph_flowchart.snap.md

@@ -1,114 +1,114 @@
 ```mermaid
 flowchart LR
   subgraph path2 [Path]
-    2["Path<br>[268, 293, 0]"]
+    2["Path<br>[266, 291, 0]"]
-    3["Segment<br>[299, 347, 0]"]
+    3["Segment<br>[297, 345, 0]"]
-    4["Segment<br>[353, 455, 0]"]
+    4["Segment<br>[351, 453, 0]"]
-    5["Segment<br>[461, 581, 0]"]
+    5["Segment<br>[459, 579, 0]"]
-    6["Segment<br>[587, 672, 0]"]
+    6["Segment<br>[585, 670, 0]"]
-    7["Segment<br>[678, 685, 0]"]
+    7["Segment<br>[676, 683, 0]"]
     8[Solid2d]
   end
   subgraph path29 [Path]
-    29["Path<br>[1616, 1726, 0]"]
+    29["Path<br>[1594, 1677, 0]"]
-    30["Segment<br>[1616, 1726, 0]"]
+    30["Segment<br>[1594, 1677, 0]"]
     31[Solid2d]
   end
   subgraph path32 [Path]
-    32["Path<br>[1739, 1833, 0]"]
+    32["Path<br>[1690, 1757, 0]"]
-    33["Segment<br>[1739, 1833, 0]"]
+    33["Segment<br>[1690, 1757, 0]"]
     34[Solid2d]
   end
   subgraph path42 [Path]
-    42["Path<br>[1616, 1726, 0]"]
+    42["Path<br>[1594, 1677, 0]"]
-    43["Segment<br>[1616, 1726, 0]"]
+    43["Segment<br>[1594, 1677, 0]"]
     44[Solid2d]
   end
   subgraph path45 [Path]
-    45["Path<br>[1739, 1833, 0]"]
+    45["Path<br>[1690, 1757, 0]"]
-    46["Segment<br>[1739, 1833, 0]"]
+    46["Segment<br>[1690, 1757, 0]"]
     47[Solid2d]
   end
   subgraph path55 [Path]
-    55["Path<br>[1616, 1726, 0]"]
+    55["Path<br>[1594, 1677, 0]"]
-    56["Segment<br>[1616, 1726, 0]"]
+    56["Segment<br>[1594, 1677, 0]"]
     57[Solid2d]
   end
   subgraph path58 [Path]
-    58["Path<br>[1739, 1833, 0]"]
+    58["Path<br>[1690, 1757, 0]"]
-    59["Segment<br>[1739, 1833, 0]"]
+    59["Segment<br>[1690, 1757, 0]"]
     60[Solid2d]
   end
   subgraph path68 [Path]
-    68["Path<br>[1616, 1726, 0]"]
+    68["Path<br>[1594, 1677, 0]"]
-    69["Segment<br>[1616, 1726, 0]"]
+    69["Segment<br>[1594, 1677, 0]"]
     70[Solid2d]
   end
   subgraph path71 [Path]
-    71["Path<br>[1739, 1833, 0]"]
+    71["Path<br>[1690, 1757, 0]"]
-    72["Segment<br>[1739, 1833, 0]"]
+    72["Segment<br>[1690, 1757, 0]"]
     73[Solid2d]
   end
   subgraph path81 [Path]
-    81["Path<br>[2406, 2441, 0]"]
+    81["Path<br>[2328, 2363, 0]"]
-    82["Segment<br>[2447, 2495, 0]"]
+    82["Segment<br>[2369, 2417, 0]"]
-    83["Segment<br>[2501, 2603, 0]"]
+    83["Segment<br>[2423, 2525, 0]"]
-    84["Segment<br>[2609, 2729, 0]"]
+    84["Segment<br>[2531, 2651, 0]"]
-    85["Segment<br>[2735, 2820, 0]"]
+    85["Segment<br>[2657, 2742, 0]"]
-    86["Segment<br>[2826, 2833, 0]"]
+    86["Segment<br>[2748, 2755, 0]"]
     87[Solid2d]
   end
   subgraph path88 [Path]
-    88["Path<br>[2844, 2999, 0]"]
+    88["Path<br>[2766, 2922, 0]"]
-    89["Segment<br>[2844, 2999, 0]"]
+    89["Segment<br>[2766, 2922, 0]"]
     90[Solid2d]
   end
   subgraph path91 [Path]
-    91["Path<br>[3014, 3180, 0]"]
+    91["Path<br>[2937, 3104, 0]"]
-    92["Segment<br>[3014, 3180, 0]"]
+    92["Segment<br>[2937, 3104, 0]"]
     93[Solid2d]
   end
   subgraph path94 [Path]
-    94["Path<br>[3195, 3352, 0]"]
+    94["Path<br>[3119, 3277, 0]"]
-    95["Segment<br>[3195, 3352, 0]"]
+    95["Segment<br>[3119, 3277, 0]"]
     96[Solid2d]
   end
   subgraph path97 [Path]
-    97["Path<br>[3367, 3535, 0]"]
+    97["Path<br>[3292, 3461, 0]"]
-    98["Segment<br>[3367, 3535, 0]"]
+    98["Segment<br>[3292, 3461, 0]"]
     99[Solid2d]
   end
   subgraph path119 [Path]
-    119["Path<br>[3975, 4059, 0]"]
+    119["Path<br>[3902, 3986, 0]"]
-    120["Segment<br>[4065, 4135, 0]"]
+    120["Segment<br>[3992, 4062, 0]"]
-    121["Segment<br>[4141, 4265, 0]"]
+    121["Segment<br>[4068, 4192, 0]"]
-    122["Segment<br>[4271, 4391, 0]"]
+    122["Segment<br>[4198, 4318, 0]"]
-    123["Segment<br>[4397, 4482, 0]"]
+    123["Segment<br>[4324, 4409, 0]"]
-    124["Segment<br>[4488, 4495, 0]"]
+    124["Segment<br>[4415, 4422, 0]"]
     125[Solid2d]
   end
   subgraph path126 [Path]
-    126["Path<br>[4506, 4677, 0]"]
+    126["Path<br>[4433, 4605, 0]"]
-    127["Segment<br>[4506, 4677, 0]"]
+    127["Segment<br>[4433, 4605, 0]"]
     128[Solid2d]
   end
   subgraph path129 [Path]
-    129["Path<br>[4692, 4874, 0]"]
+    129["Path<br>[4620, 4803, 0]"]
-    130["Segment<br>[4692, 4874, 0]"]
+    130["Segment<br>[4620, 4803, 0]"]
     131[Solid2d]
   end
   subgraph path132 [Path]
-    132["Path<br>[4889, 5062, 0]"]
+    132["Path<br>[4818, 4992, 0]"]
-    133["Segment<br>[4889, 5062, 0]"]
+    133["Segment<br>[4818, 4992, 0]"]
     134[Solid2d]
   end
   subgraph path135 [Path]
-    135["Path<br>[5077, 5261, 0]"]
+    135["Path<br>[5007, 5192, 0]"]
-    136["Segment<br>[5077, 5261, 0]"]
+    136["Segment<br>[5007, 5192, 0]"]
     137[Solid2d]
   end
-  1["Plane<br>[243, 262, 0]"]
+  1["Plane<br>[243, 260, 0]"]
-  9["Sweep Extrusion<br>[699, 734, 0]"]
+  9["Sweep Extrusion<br>[697, 732, 0]"]
   10[Wall]
   11[Wall]
   12[Wall]
@@ -123,40 +123,40 @@ flowchart LR
   21["SweepEdge Adjacent"]
   22["SweepEdge Opposite"]
   23["SweepEdge Adjacent"]
-  24["EdgeCut Fillet<br>[740, 1021, 0]"]
+  24["EdgeCut Fillet<br>[738, 1020, 0]"]
-  25["EdgeCut Fillet<br>[740, 1021, 0]"]
+  25["EdgeCut Fillet<br>[738, 1020, 0]"]
-  26["EdgeCut Fillet<br>[740, 1021, 0]"]
+  26["EdgeCut Fillet<br>[738, 1020, 0]"]
-  27["EdgeCut Fillet<br>[740, 1021, 0]"]
+  27["EdgeCut Fillet<br>[738, 1020, 0]"]
-  28["Plane<br>[1585, 1608, 0]"]
+  28["Plane<br>[1563, 1586, 0]"]
-  35["Sweep Extrusion<br>[1853, 1904, 0]"]
+  35["Sweep Extrusion<br>[1777, 1828, 0]"]
   36[Wall]
   37["Cap Start"]
   38["Cap End"]
   39["SweepEdge Opposite"]
   40["SweepEdge Adjacent"]
-  41["Plane<br>[1585, 1608, 0]"]
+  41["Plane<br>[1563, 1586, 0]"]
-  48["Sweep Extrusion<br>[1853, 1904, 0]"]
+  48["Sweep Extrusion<br>[1777, 1828, 0]"]
   49[Wall]
   50["Cap Start"]
   51["Cap End"]
   52["SweepEdge Opposite"]
   53["SweepEdge Adjacent"]
-  54["Plane<br>[1585, 1608, 0]"]
+  54["Plane<br>[1563, 1586, 0]"]
-  61["Sweep Extrusion<br>[1853, 1904, 0]"]
+  61["Sweep Extrusion<br>[1777, 1828, 0]"]
   62[Wall]
   63["Cap Start"]
   64["Cap End"]
   65["SweepEdge Opposite"]
   66["SweepEdge Adjacent"]
-  67["Plane<br>[1585, 1608, 0]"]
+  67["Plane<br>[1563, 1586, 0]"]
-  74["Sweep Extrusion<br>[1853, 1904, 0]"]
+  74["Sweep Extrusion<br>[1777, 1828, 0]"]
   75[Wall]
   76["Cap Start"]
   77["Cap End"]
   78["SweepEdge Opposite"]
   79["SweepEdge Adjacent"]
-  80["Plane<br>[2381, 2400, 0]"]
+  80["Plane<br>[2305, 2322, 0]"]
-  100["Sweep Extrusion<br>[3553, 3595, 0]"]
+  100["Sweep Extrusion<br>[3479, 3521, 0]"]
   101[Wall]
   102[Wall]
   103[Wall]
@@ -171,11 +171,11 @@ flowchart LR
   112["SweepEdge Adjacent"]
   113["SweepEdge Opposite"]
   114["SweepEdge Adjacent"]
-  115["EdgeCut Fillet<br>[3601, 3882, 0]"]
+  115["EdgeCut Fillet<br>[3527, 3809, 0]"]
-  116["EdgeCut Fillet<br>[3601, 3882, 0]"]
+  116["EdgeCut Fillet<br>[3527, 3809, 0]"]
-  117["EdgeCut Fillet<br>[3601, 3882, 0]"]
+  117["EdgeCut Fillet<br>[3527, 3809, 0]"]
-  118["EdgeCut Fillet<br>[3601, 3882, 0]"]
+  118["EdgeCut Fillet<br>[3527, 3809, 0]"]
-  138["Sweep Extrusion<br>[5279, 5321, 0]"]
+  138["Sweep Extrusion<br>[5210, 5252, 0]"]
   139[Wall]
   140[Wall]
   141[Wall]
@@ -190,11 +190,11 @@ flowchart LR
   150["SweepEdge Adjacent"]
   151["SweepEdge Opposite"]
   152["SweepEdge Adjacent"]
-  153["EdgeCut Fillet<br>[5327, 5608, 0]"]
+  153["EdgeCut Fillet<br>[5258, 5540, 0]"]
-  154["EdgeCut Fillet<br>[5327, 5608, 0]"]
+  154["EdgeCut Fillet<br>[5258, 5540, 0]"]
-  155["EdgeCut Fillet<br>[5327, 5608, 0]"]
+  155["EdgeCut Fillet<br>[5258, 5540, 0]"]
-  156["EdgeCut Fillet<br>[5327, 5608, 0]"]
+  156["EdgeCut Fillet<br>[5258, 5540, 0]"]
-  157["StartSketchOnFace<br>[3937, 3969, 0]"]
+  157["StartSketchOnFace<br>[3864, 3896, 0]"]
   1 --- 2
   2 --- 3
   2 --- 4

rust/kcl-lib/tests/kcl_samples/enclosure/ops.snap

@@ -7,8 +7,8 @@ description: Operations executed enclosure.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
+          "type": "Plane",
-          "value": "XY"
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }
@@ -148,8 +148,8 @@ description: Operations executed enclosure.kcl
     "type": "UserDefinedFunctionCall",
     "name": "function001",
     "functionSourceRange": [
-      1276,
+      1254,
-      1927,
+      1851,
       0
     ],
     "unlabeledArg": null,
@@ -526,8 +526,8 @@ description: Operations executed enclosure.kcl
     "type": "UserDefinedFunctionCall",
     "name": "function001",
     "functionSourceRange": [
-      1276,
+      1254,
-      1927,
+      1851,
       0
     ],
     "unlabeledArg": null,
@@ -904,8 +904,8 @@ description: Operations executed enclosure.kcl
     "type": "UserDefinedFunctionCall",
     "name": "function001",
     "functionSourceRange": [
-      1276,
+      1254,
-      1927,
+      1851,
       0
     ],
     "unlabeledArg": null,
@@ -1282,8 +1282,8 @@ description: Operations executed enclosure.kcl
     "type": "UserDefinedFunctionCall",
     "name": "function001",
     "functionSourceRange": [
-      1276,
+      1254,
-      1927,
+      1851,
       0
     ],
     "unlabeledArg": null,
@@ -1660,8 +1660,8 @@ description: Operations executed enclosure.kcl
     "labeledArgs": {
       "data": {
         "value": {
-          "type": "String",
+          "type": "Plane",
-          "value": "XY"
+          "artifact_id": "[uuid]"
         },
         "sourceRange": []
       }

rust/kcl-lib/tests/kcl_samples/enclosure/program_memory.snap

@@ -15,9 +15,9 @@ description: Variables in memory after executing enclosure.kcl
           "id": "[uuid]",
           "sourceRange": [],
           "tag": {
-            "commentStart": 325,
+            "commentStart": 323,
-            "end": 346,
+            "end": 344,
-            "start": 325,
+            "start": 323,
             "type": "TagDeclarator",
             "value": "rectangleSegmentA001"
           },
@@ -28,9 +28,9 @@ description: Variables in memory after executing enclosure.kcl
           "id": "[uuid]",
           "sourceRange": [],
           "tag": {
-            "commentStart": 433,
+            "commentStart": 431,
-            "end": 454,
+            "end": 452,
-            "start": 433,
+            "start": 431,
             "type": "TagDeclarator",
             "value": "rectangleSegmentB001"
           },
@@ -41,9 +41,9 @@ description: Variables in memory after executing enclosure.kcl
           "id": "[uuid]",
           "sourceRange": [],
           "tag": {
-            "commentStart": 559,
+            "commentStart": 557,
-            "end": 580,
+            "end": 578,
-            "start": 559,
+            "start": 557,
             "type": "TagDeclarator",
             "value": "rectangleSegmentC001"
           },
@@ -54,9 +54,9 @@ description: Variables in memory after executing enclosure.kcl
           "id": "[uuid]",
           "sourceRange": [],
           "tag": {
-            "commentStart": 650,
+            "commentStart": 648,
-            "end": 671,
+            "end": 669,
-            "start": 650,
+            "start": 648,
             "type": "TagDeclarator",
             "value": "rectangleSegmentD001"
           },
@@ -77,9 +77,9 @@ description: Variables in memory after executing enclosure.kcl
               0.0
             ],
             "tag": {
-              "commentStart": 325,
+              "commentStart": 323,
-              "end": 346,
+              "end": 344,
-              "start": 325,
+              "start": 323,
               "type": "TagDeclarator",
               "value": "rectangleSegmentA001"
             },
@@ -102,9 +102,9 @@ description: Variables in memory after executing enclosure.kcl
               0.0
             ],
             "tag": {
-              "commentStart": 433,
+              "commentStart": 431,
-              "end": 454,
+              "end": 452,
-              "start": 433,
+              "start": 431,
               "type": "TagDeclarator",
               "value": "rectangleSegmentB001"
             },
@@ -127,9 +127,9 @@ description: Variables in memory after executing enclosure.kcl
               175.0
             ],
             "tag": {
-              "commentStart": 559,
+              "commentStart": 557,
-              "end": 580,
+              "end": 578,
-              "start": 559,
+              "start": 557,
               "type": "TagDeclarator",
               "value": "rectangleSegmentC001"
             },
@@ -152,9 +152,9 @@ description: Variables in memory after executing enclosure.kcl
               175.0
             ],
             "tag": {
-              "commentStart": 650,
+              "commentStart": 648,
-              "end": 671,
+              "end": 669,
-              "start": 650,
+              "start": 648,
               "type": "TagDeclarator",
               "value": "rectangleSegmentD001"
             },
@@ -308,9 +308,9 @@ description: Variables in memory after executing enclosure.kcl
           "id": "[uuid]",
           "sourceRange": [],
           "tag": {
-            "commentStart": 2473,
+            "commentStart": 2395,
-            "end": 2494,
+            "end": 2416,
-            "start": 2473,
+            "start": 2395,
             "type": "TagDeclarator",
             "value": "rectangleSegmentA002"
           },
@@ -321,9 +321,9 @@ description: Variables in memory after executing enclosure.kcl
           "id": "[uuid]",
           "sourceRange": [],
           "tag": {
-            "commentStart": 2581,
+            "commentStart": 2503,
-            "end": 2602,
+            "end": 2524,
-            "start": 2581,
+            "start": 2503,
             "type": "TagDeclarator",
             "value": "rectangleSegmentB002"
           },
@@ -334,9 +334,9 @@ description: Variables in memory after executing enclosure.kcl
           "id": "[uuid]",
           "sourceRange": [],
           "tag": {
-            "commentStart": 2707,
+            "commentStart": 2629,
-            "end": 2728,
+            "end": 2650,
-            "start": 2707,
+            "start": 2629,
             "type": "TagDeclarator",
             "value": "rectangleSegmentC002"
           },
@@ -347,9 +347,9 @@ description: Variables in memory after executing enclosure.kcl
           "id": "[uuid]",
           "sourceRange": [],
           "tag": {
-            "commentStart": 2798,
+            "commentStart": 2720,
-            "end": 2819,
+            "end": 2741,
-            "start": 2798,
+            "start": 2720,
             "type": "TagDeclarator",
             "value": "rectangleSegmentD002"
           },
@@ -370,9 +370,9 @@ description: Variables in memory after executing enclosure.kcl
               0.0
             ],
             "tag": {
-              "commentStart": 2473,
+              "commentStart": 2395,
-              "end": 2494,
+              "end": 2416,
-              "start": 2473,
+              "start": 2395,
               "type": "TagDeclarator",
               "value": "rectangleSegmentA002"
             },
@@ -395,9 +395,9 @@ description: Variables in memory after executing enclosure.kcl
               0.0
             ],
             "tag": {
-              "commentStart": 2581,
+              "commentStart": 2503,
-              "end": 2602,
+              "end": 2524,
-              "start": 2581,
+              "start": 2503,
               "type": "TagDeclarator",
               "value": "rectangleSegmentB002"
             },
@@ -420,9 +420,9 @@ description: Variables in memory after executing enclosure.kcl
               175.0
             ],
             "tag": {
-              "commentStart": 2707,
+              "commentStart": 2629,
-              "end": 2728,
+              "end": 2650,
-              "start": 2707,
+              "start": 2629,
               "type": "TagDeclarator",
               "value": "rectangleSegmentC002"
             },
@@ -445,9 +445,9 @@ description: Variables in memory after executing enclosure.kcl
               175.0
             ],
             "tag": {
-              "commentStart": 2798,
+              "commentStart": 2720,
-              "end": 2819,
+              "end": 2741,
-              "start": 2798,
+              "start": 2720,
               "type": "TagDeclarator",
               "value": "rectangleSegmentD002"
             },
@@ -601,9 +601,9 @@ description: Variables in memory after executing enclosure.kcl
           "id": "[uuid]",
           "sourceRange": [],
           "tag": {
-            "commentStart": 4113,
+            "commentStart": 4040,
-            "end": 4134,
+            "end": 4061,
-            "start": 4113,
+            "start": 4040,
             "type": "TagDeclarator",
             "value": "rectangleSegmentA003"
           },
@@ -614,9 +614,9 @@ description: Variables in memory after executing enclosure.kcl
           "id": "[uuid]",
           "sourceRange": [],
           "tag": {
-            "commentStart": 4243,
+            "commentStart": 4170,
-            "end": 4264,
+            "end": 4191,
-            "start": 4243,
+            "start": 4170,
             "type": "TagDeclarator",
             "value": "rectangleSegmentB003"
           },
@@ -627,9 +627,9 @@ description: Variables in memory after executing enclosure.kcl
           "id": "[uuid]",
           "sourceRange": [],
           "tag": {
-            "commentStart": 4369,
+            "commentStart": 4296,
-            "end": 4390,
+            "end": 4317,
-            "start": 4369,
+            "start": 4296,
             "type": "TagDeclarator",
             "value": "rectangleSegmentC003"
           },
@@ -640,9 +640,9 @@ description: Variables in memory after executing enclosure.kcl
           "id": "[uuid]",
           "sourceRange": [],
           "tag": {
-            "commentStart": 4460,
+            "commentStart": 4387,
-            "end": 4481,
+            "end": 4408,
-            "start": 4460,
+            "start": 4387,
             "type": "TagDeclarator",
             "value": "rectangleSegmentD003"
           },
@@ -663,9 +663,9 @@ description: Variables in memory after executing enclosure.kcl
               3.0
             ],
             "tag": {
-              "commentStart": 4113,
+              "commentStart": 4040,
-              "end": 4134,
+              "end": 4061,
-              "start": 4113,
+              "start": 4040,
               "type": "TagDeclarator",
               "value": "rectangleSegmentA003"
             },
@@ -688,9 +688,9 @@ description: Variables in memory after executing enclosure.kcl
               3.0
             ],
             "tag": {
-              "commentStart": 4243,
+              "commentStart": 4170,
-              "end": 4264,
+              "end": 4191,
-              "start": 4243,
+              "start": 4170,
               "type": "TagDeclarator",
               "value": "rectangleSegmentB003"
             },
@@ -713,9 +713,9 @@ description: Variables in memory after executing enclosure.kcl
               172.0
             ],
             "tag": {
-              "commentStart": 4369,
+              "commentStart": 4296,
-              "end": 4390,
+              "end": 4317,
-              "start": 4369,
+              "start": 4296,
               "type": "TagDeclarator",
               "value": "rectangleSegmentC003"
             },
@@ -738,9 +738,9 @@ description: Variables in memory after executing enclosure.kcl
               172.0
             ],
             "tag": {
-              "commentStart": 4460,
+              "commentStart": 4387,
-              "end": 4481,
+              "end": 4408,
-              "start": 4460,
+              "start": 4387,
               "type": "TagDeclarator",
               "value": "rectangleSegmentD003"
             },
@@ -803,9 +803,9 @@ description: Variables in memory after executing enclosure.kcl
                 "id": "[uuid]",
                 "sourceRange": [],
                 "tag": {
-                  "commentStart": 2473,
+                  "commentStart": 2395,
-                  "end": 2494,
+                  "end": 2416,
-                  "start": 2473,
+                  "start": 2395,
                   "type": "TagDeclarator",
                   "value": "rectangleSegmentA002"
                 },
@@ -816,9 +816,9 @@ description: Variables in memory after executing enclosure.kcl
                 "id": "[uuid]",
                 "sourceRange": [],
                 "tag": {
-                  "commentStart": 2581,
+                  "commentStart": 2503,
-                  "end": 2602,
+                  "end": 2524,
-                  "start": 2581,
+                  "start": 2503,
                   "type": "TagDeclarator",
                   "value": "rectangleSegmentB002"
                 },
@@ -829,9 +829,9 @@ description: Variables in memory after executing enclosure.kcl
                 "id": "[uuid]",
                 "sourceRange": [],
                 "tag": {
-                  "commentStart": 2707,
+                  "commentStart": 2629,
-                  "end": 2728,
+                  "end": 2650,
-                  "start": 2707,
+                  "start": 2629,
                   "type": "TagDeclarator",
                   "value": "rectangleSegmentC002"
                 },
@@ -842,9 +842,9 @@ description: Variables in memory after executing enclosure.kcl
                 "id": "[uuid]",
                 "sourceRange": [],
                 "tag": {
-                  "commentStart": 2798,
+                  "commentStart": 2720,
-                  "end": 2819,
+                  "end": 2741,
-                  "start": 2798,
+                  "start": 2720,
                   "type": "TagDeclarator",
                   "value": "rectangleSegmentD002"
                 },
@@ -865,9 +865,9 @@ description: Variables in memory after executing enclosure.kcl
                     0.0
                   ],
                   "tag": {
-                    "commentStart": 2473,
+                    "commentStart": 2395,
-                    "end": 2494,
+                    "end": 2416,
-                    "start": 2473,
+                    "start": 2395,
                     "type": "TagDeclarator",
                     "value": "rectangleSegmentA002"
                   },
@@ -890,9 +890,9 @@ description: Variables in memory after executing enclosure.kcl
                     0.0
                   ],
                   "tag": {
-                    "commentStart": 2581,
+                    "commentStart": 2503,
-                    "end": 2602,
+                    "end": 2524,
-                    "start": 2581,
+                    "start": 2503,
                     "type": "TagDeclarator",
                     "value": "rectangleSegmentB002"
                   },
@@ -915,9 +915,9 @@ description: Variables in memory after executing enclosure.kcl
                     175.0
                   ],
                   "tag": {
-                    "commentStart": 2707,
+                    "commentStart": 2629,
-                    "end": 2728,
+                    "end": 2650,
-                    "start": 2707,
+                    "start": 2629,
                     "type": "TagDeclarator",
                     "value": "rectangleSegmentC002"
                   },
@@ -940,9 +940,9 @@ description: Variables in memory after executing enclosure.kcl
                     175.0
                   ],
                   "tag": {
-                    "commentStart": 2798,
+                    "commentStart": 2720,
-                    "end": 2819,
+                    "end": 2741,
-                    "start": 2798,
+                    "start": 2720,
                     "type": "TagDeclarator",
                     "value": "rectangleSegmentD002"
                   },
@@ -1285,9 +1285,9 @@ description: Variables in memory after executing enclosure.kcl
             0.0
           ],
           "tag": {
-            "commentStart": 325,
+            "commentStart": 323,
-            "end": 346,
+            "end": 344,
-            "start": 325,
+            "start": 323,
             "type": "TagDeclarator",
             "value": "rectangleSegmentA001"
           },
@@ -1310,9 +1310,9 @@ description: Variables in memory after executing enclosure.kcl
             0.0
           ],
           "tag": {
-            "commentStart": 433,
+            "commentStart": 431,
-            "end": 454,
+            "end": 452,
-            "start": 433,
+            "start": 431,
             "type": "TagDeclarator",
             "value": "rectangleSegmentB001"
           },
@@ -1335,9 +1335,9 @@ description: Variables in memory after executing enclosure.kcl
             175.0
           ],
           "tag": {
-            "commentStart": 559,
+            "commentStart": 557,
-            "end": 580,
+            "end": 578,
-            "start": 559,
+            "start": 557,
             "type": "TagDeclarator",
             "value": "rectangleSegmentC001"
           },
@@ -1360,9 +1360,9 @@ description: Variables in memory after executing enclosure.kcl
             175.0
           ],
           "tag": {
-            "commentStart": 650,
+            "commentStart": 648,
-            "end": 671,
+            "end": 669,
-            "start": 650,
+            "start": 648,
             "type": "TagDeclarator",
             "value": "rectangleSegmentD001"
           },
@@ -1483,9 +1483,9 @@ description: Variables in memory after executing enclosure.kcl
             0.0
           ],
           "tag": {
-            "commentStart": 2473,
+            "commentStart": 2395,
-            "end": 2494,
+            "end": 2416,
-            "start": 2473,
+            "start": 2395,
             "type": "TagDeclarator",
             "value": "rectangleSegmentA002"
           },
@@ -1508,9 +1508,9 @@ description: Variables in memory after executing enclosure.kcl
             0.0
           ],
           "tag": {
-            "commentStart": 2581,
+            "commentStart": 2503,
-            "end": 2602,
+            "end": 2524,
-            "start": 2581,
+            "start": 2503,
             "type": "TagDeclarator",
             "value": "rectangleSegmentB002"
           },
@@ -1533,9 +1533,9 @@ description: Variables in memory after executing enclosure.kcl
             175.0
           ],
           "tag": {
-            "commentStart": 2707,
+            "commentStart": 2629,
-            "end": 2728,
+            "end": 2650,
-            "start": 2707,
+            "start": 2629,
             "type": "TagDeclarator",
             "value": "rectangleSegmentC002"
           },
@@ -1558,9 +1558,9 @@ description: Variables in memory after executing enclosure.kcl
             175.0
           ],
           "tag": {
-            "commentStart": 2798,
+            "commentStart": 2720,
-            "end": 2819,
+            "end": 2741,
-            "start": 2798,
+            "start": 2720,
             "type": "TagDeclarator",
             "value": "rectangleSegmentD002"
           },
@@ -1681,9 +1681,9 @@ description: Variables in memory after executing enclosure.kcl
             3.0
           ],
           "tag": {
-            "commentStart": 4113,
+            "commentStart": 4040,
-            "end": 4134,
+            "end": 4061,
-            "start": 4113,
+            "start": 4040,
             "type": "TagDeclarator",
             "value": "rectangleSegmentA003"
           },
@@ -1706,9 +1706,9 @@ description: Variables in memory after executing enclosure.kcl
             3.0
           ],
           "tag": {
-            "commentStart": 4243,
+            "commentStart": 4170,
-            "end": 4264,
+            "end": 4191,
-            "start": 4243,
+            "start": 4170,
             "type": "TagDeclarator",
             "value": "rectangleSegmentB003"
           },
@@ -1731,9 +1731,9 @@ description: Variables in memory after executing enclosure.kcl
             172.0
           ],
           "tag": {
-            "commentStart": 4369,
+            "commentStart": 4296,
-            "end": 4390,
+            "end": 4317,
-            "start": 4369,
+            "start": 4296,
             "type": "TagDeclarator",
             "value": "rectangleSegmentC003"
           },
@@ -1756,9 +1756,9 @@ description: Variables in memory after executing enclosure.kcl
             172.0
           ],
           "tag": {
-            "commentStart": 4460,
+            "commentStart": 4387,
-            "end": 4481,
+            "end": 4408,
-            "start": 4460,
+            "start": 4387,
             "type": "TagDeclarator",
             "value": "rectangleSegmentD003"
           },
@@ -1821,9 +1821,9 @@ description: Variables in memory after executing enclosure.kcl
               "id": "[uuid]",
               "sourceRange": [],
               "tag": {
-                "commentStart": 2473,
+                "commentStart": 2395,
-                "end": 2494,
+                "end": 2416,
-                "start": 2473,
+                "start": 2395,
                 "type": "TagDeclarator",
                 "value": "rectangleSegmentA002"
               },
@@ -1834,9 +1834,9 @@ description: Variables in memory after executing enclosure.kcl
               "id": "[uuid]",
               "sourceRange": [],
               "tag": {
-                "commentStart": 2581,
+                "commentStart": 2503,
-                "end": 2602,
+                "end": 2524,
-                "start": 2581,
+                "start": 2503,
                 "type": "TagDeclarator",
                 "value": "rectangleSegmentB002"
               },
@@ -1847,9 +1847,9 @@ description: Variables in memory after executing enclosure.kcl
               "id": "[uuid]",
               "sourceRange": [],
               "tag": {
-                "commentStart": 2707,
+                "commentStart": 2629,
-                "end": 2728,
+                "end": 2650,
-                "start": 2707,
+                "start": 2629,
                 "type": "TagDeclarator",
                 "value": "rectangleSegmentC002"
               },
@@ -1860,9 +1860,9 @@ description: Variables in memory after executing enclosure.kcl
               "id": "[uuid]",
               "sourceRange": [],
               "tag": {
-                "commentStart": 2798,
+                "commentStart": 2720,
-                "end": 2819,
+                "end": 2741,
-                "start": 2798,
+                "start": 2720,
                 "type": "TagDeclarator",
                 "value": "rectangleSegmentD002"
               },
@@ -1883,9 +1883,9 @@ description: Variables in memory after executing enclosure.kcl
                   0.0
                 ],
                 "tag": {
-                  "commentStart": 2473,
+                  "commentStart": 2395,
-                  "end": 2494,
+                  "end": 2416,
-                  "start": 2473,
+                  "start": 2395,
                   "type": "TagDeclarator",
                   "value": "rectangleSegmentA002"
                 },
@@ -1908,9 +1908,9 @@ description: Variables in memory after executing enclosure.kcl
                   0.0
                 ],
                 "tag": {
-                  "commentStart": 2581,
+                  "commentStart": 2503,
-                  "end": 2602,
+                  "end": 2524,
-                  "start": 2581,
+                  "start": 2503,
                   "type": "TagDeclarator",
                   "value": "rectangleSegmentB002"
                 },
@@ -1933,9 +1933,9 @@ description: Variables in memory after executing enclosure.kcl
                   175.0
                 ],
                 "tag": {
-                  "commentStart": 2707,
+                  "commentStart": 2629,
-                  "end": 2728,
+                  "end": 2650,
-                  "start": 2707,
+                  "start": 2629,
                   "type": "TagDeclarator",
                   "value": "rectangleSegmentC002"
                 },
@@ -1958,9 +1958,9 @@ description: Variables in memory after executing enclosure.kcl
                   175.0
                 ],
                 "tag": {
-                  "commentStart": 2798,
+                  "commentStart": 2720,
-                  "end": 2819,
+                  "end": 2741,
-                  "start": 2798,
+                  "start": 2720,
                   "type": "TagDeclarator",
                   "value": "rectangleSegmentD002"
                 },