Closes https://github.com/KittyCAD/engine/issues/3494. Thanks to @nadr0 for helping on the JS side.
If users set their units, the grid will stop auto scaling, and instead will be set to 10 of whatever unit they used.
If users set their units, and those units are metric, then it'll include a scale bar (see screenshot). Imperial units won't have that bar.
This behaviour is configurable via settings.
## Limitations
- The scale bar below the grid cannot be disabled in metric units, and cannot be enabled in imperial units
<img width="1690" alt="Screenshot 2025-06-05 at 7 51 41 PM" src="https://github.com/user-attachments/assets/c597087c-f96d-4c30-95f4-b3d8ba2b5567" />
* Change to use deterministic artifact graph
* Update output to use the new order
* Fix to clear everything when scene is cleared
* Fix lots
* Update artifact graph output for the last time
* Delete unused sorting code
* Remove unneeded cfg
* Fix to preserve top-level artifacts when there's an error
* Update output after error fix
* Add better doc comments
* Remove duplicate global operations
* Update comments
* Update ignored tests that were flaky
* Update graph for new samples after rebase
* Fix test assertion message
* Replace tag type with tagIdent and tagDecl
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Replace tagIdent with TaggedEdge and TaggedFace
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Improve docs around PI
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Refactor and polish type error messages
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Add suggestion to fix unknown numbers error
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Don't warn so often about unknown units
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Change so that operations are stored per module
* Refactor so that all modeling commands go through ExecState
* Remove unneeded PartialOrd implementations
* Remove artifact_commands from KclError since it was only for debugging
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* Replace uses of get_unlabeled_kw_arg with _typed version
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Remove more untyped arg getters
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Add backtrace to errors
* Add display of backtraces with hints
* Change pane badge to only show count of errors
* Fix property name to not collide with Error superclass
* Increase min stack again
* Add e2e test that checks that the diagnostics are created in CodeMirror
* Remove unneeded code
* Change to the new hotness
* Fix to add NodePaths to SketchOnFace and SketchOnPlane artifacts
* Fix to only compute the new part of the artifact graph
* Change to early-return sooner when in mock mode
* Add another test
* Fix to propagate NodePath for sketch on face
* Update output
Preparing for the removal of positional functions from the language. The first big step is to change all our KCL code examples, test code, public samples etc to all use keyword functions.
Apologies for how large this PR is. Most of it is:
- Changing example KCL that defined its own functions, so the functions now use keyword arguments rather than positional arguments. E.g. change `cube([20, 20])` to be `cube(center = [20, 20])`.
- Some parts of the code assumed positional code and didn't handle keyword calls, e.g. the linter would only check for positional calls to startSketchOn. Now they should work with either positional or keyword.
- Update all the artifacts
This does _not_ remove support for positional calls. That will be in a follow-up PR.
* Remove deprecated syntax
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* fix one test
* fix sketch on revolved face test
* fix test: empty-scene default-planes act as expected
* fix up more tests
* another fix
* remove another const
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
Co-authored-by: Kurt Hutten Irev-Dev <k.hutten@protonmail.ch>
* Declare chamfer in KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Ignore more in the simulation tests
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Declare fillet in KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Move shell and hollow to KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Declare std::offsetPlane in KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Use two axes to define planes in KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Turn on uom checks
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Convert all lengths to mm for engine calls
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* wip
* sketch a bit more; going to pull this out of tests next
* wip
* lock start things
* this was a bad idea
* Revert "this was a bad idea"
This reverts commit a2092e7ed6.
* prepare prelude before spawning
* error
* poop
* yike
* :(
* ok
* Reapply "this was a bad idea"
This reverts commit fafdf41093.
* chip away more
* man this is bad
* fix rebase add feature flag
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* get rid of execution kind
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* clippy
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* logs
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* no extra executes
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* race w batch
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* cluppy
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* no printlns
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* no printlns
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fix source ranges
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* batch shit
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fix
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fix some bugs
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fix error
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* cut 1
* preserve mem
* re-ad deep_clone
the helper we were calling was pushing a new call, which was hanging
out. we can skip the middleman since we already have something properly
prepared, just without a stdlib in some cases.
* skip non-kcl
* clean up source range bug
* error message changed
the uuids also changed because the error is hit before execute even
starts.
* typo
* rensnapshot a few
* order things
* MAYBE REVERT LATER:
attempt at an ordering
* snapsnap
* Revert "snapsnap"
This reverts commit 7350b32c7d.
* Revert "MAYBE REVERT LATER:"
This reverts commit ab49f3e85f.
* ugh
* poop
* poop2
* lint
* tranche 1
* more
* more snaps
* snap
* more
* update
* MAYBE REVERT THIS
* cache multi-file
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* addd tests
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* set to false
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* add test outputs
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* clippy
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* kcl-py-bindings uses carwheel
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* update snapshots
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com>
Co-authored-by: Paul R. Tagliamonte <paul@zoo.dev>
Co-authored-by: Paul Tagliamonte <paultag@gmail.com>
