Closes https://github.com/KittyCAD/engine/issues/3494. Thanks to @nadr0 for helping on the JS side.
If users set their units, the grid will stop auto scaling, and instead will be set to 10 of whatever unit they used.
If users set their units, and those units are metric, then it'll include a scale bar (see screenshot). Imperial units won't have that bar.
This behaviour is configurable via settings.
## Limitations
- The scale bar below the grid cannot be disabled in metric units, and cannot be enabled in imperial units
<img width="1690" alt="Screenshot 2025-06-05 at 7 51 41 PM" src="https://github.com/user-attachments/assets/c597087c-f96d-4c30-95f4-b3d8ba2b5567" />
* Add libm dependency
* Change to use libm for trig functions
* Remove redactions for floating point
* Update output
* Use clippy to prevent stdlib math sneaking back in
---------
Co-authored-by: Adam Chalmers <adam.chalmers@zoo.dev>
* Change to use deterministic artifact graph
* Update output to use the new order
* Fix to clear everything when scene is cleared
* Fix lots
* Update artifact graph output for the last time
* Delete unused sorting code
* Remove unneeded cfg
* Fix to preserve top-level artifacts when there's an error
* Update output after error fix
* Add better doc comments
* Remove duplicate global operations
* Update comments
* Update ignored tests that were flaky
* Update graph for new samples after rebase
* Fix test assertion message
* Change so that operations are stored per module
* Refactor so that all modeling commands go through ExecState
* Remove unneeded PartialOrd implementations
* Remove artifact_commands from KclError since it was only for debugging
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* Add NodePath to operations
* Change to use nodePath to get pathToNode instead of sourceRange
* Add additional node path unit test
* Update output
* Fix import statement NodePaths
* Update output
* Factor into function
Previously in a member expression like `foo.x` or `foo[3]`, `foo` had to be an identifier. You could not do something like `f().x` (and if you tried, you got a cryptic error). Rather than make the error better, we should just accept any expression to be the LHS of a member expression (aka its 'object').
This does knock our "parse lots of function calls" from 58 to 55 calls before it stack overflows. But I think it's fine, we'll address this in https://github.com/KittyCAD/modeling-app/pull/6226 when I get back to it.
Closes https://github.com/KittyCAD/modeling-app/issues/7273
KCL's `fillet` function takes an array of edges to fillet. Previously this would do `n` fillet API commands, one per edge. This PR combines them all into one call, which should improve performance. You can see the effect in the artifact_commands snapshots, e.g. `rust/kcl-lib/tests/kcl_samples/axial-fan/artifact_commands.snap`
Besides performance, this should fix a bug where some KCL fillets would fail, when they should have succeeded. Example from @max-mrgrsk:
```kcl
sketch001 = startSketchOn(XY)
|> startProfile(at = [-12, -6])
|> line(end = [0, 12], tag = $seg04)
|> line(end = [24, 0], tag = $seg03)
|> line(end = [0, -12], tag = $seg02)
|> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg01)
|> close()
extrude001 = extrude(
sketch001,
length = 12,
tagEnd = $capEnd001,
tagStart = $capStart001,
)
|> fillet(
radius = 5,
tags = [
getCommonEdge(faces = [seg02, capEnd001]),
getCommonEdge(faces = [seg01, capEnd001]),
getCommonEdge(faces = [seg03, capEnd001]),
getCommonEdge(faces = [seg04, capEnd001])
],
)
```
This program fails on main, but succeeds on this branch.
* Update telemetry antenna entity names
Changed the generic sketch and profile entity names to more specific names
* Update kcl-samples simulation test output
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* Shuffle around function call code
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Refactor function calls to share more code
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Hack to leave the result of revolve as a singleton rather than array
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Display NodePath in artifact graph mermaid charts
* Update output
* Change node path display to be only comments
* Update output
* Update output after rebase
Preparing for the removal of positional functions from the language. The first big step is to change all our KCL code examples, test code, public samples etc to all use keyword functions.
Apologies for how large this PR is. Most of it is:
- Changing example KCL that defined its own functions, so the functions now use keyword arguments rather than positional arguments. E.g. change `cube([20, 20])` to be `cube(center = [20, 20])`.
- Some parts of the code assumed positional code and didn't handle keyword calls, e.g. the linter would only check for positional calls to startSketchOn. Now they should work with either positional or keyword.
- Update all the artifacts
This does _not_ remove support for positional calls. That will be in a follow-up PR.
* Declare chamfer in KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Ignore more in the simulation tests
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Declare fillet in KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Move shell and hollow to KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Common edge faces into artifact graph
* clean up
* kingdom of tags
* add tests
* hook up tags with edge treatments
* update unit tests
* update e2e
* clean up
* more fix up after main merge
* fmt
* revolve fix
* fix new circular dependency
* fix revolve
* remove numbers from circ deps, makes diffs bad
* sim test updates
* try and get tests working
* update
* Fix tsc error
---------
Co-authored-by: max-mrgrsk <156543465+max-mrgrsk@users.noreply.github.com>
Co-authored-by: max <margorskyi@gmail.com>
Co-authored-by: Jonathan Tran <jonnytran@gmail.com>
* Declare std::offsetPlane in KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Use two axes to define planes in KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Turn on uom checks
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Convert all lengths to mm for engine calls
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
