Closes https://github.com/KittyCAD/engine/issues/3494. Thanks to @nadr0 for helping on the JS side.
If users set their units, the grid will stop auto scaling, and instead will be set to 10 of whatever unit they used.
If users set their units, and those units are metric, then it'll include a scale bar (see screenshot). Imperial units won't have that bar.
This behaviour is configurable via settings.
## Limitations
- The scale bar below the grid cannot be disabled in metric units, and cannot be enabled in imperial units
<img width="1690" alt="Screenshot 2025-06-05 at 7 51 41 PM" src="https://github.com/user-attachments/assets/c597087c-f96d-4c30-95f4-b3d8ba2b5567" />
* Add libm dependency
* Change to use libm for trig functions
* Remove redactions for floating point
* Update output
* Use clippy to prevent stdlib math sneaking back in
---------
Co-authored-by: Adam Chalmers <adam.chalmers@zoo.dev>
* Change so that operations are stored per module
* Refactor so that all modeling commands go through ExecState
* Remove unneeded PartialOrd implementations
* Remove artifact_commands from KclError since it was only for debugging
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* Add NodePath to operations
* Change to use nodePath to get pathToNode instead of sourceRange
* Add additional node path unit test
* Update output
* Fix import statement NodePaths
* Update output
* Factor into function
* Shuffle around function call code
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Refactor function calls to share more code
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Hack to leave the result of revolve as a singleton rather than array
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Display NodePath in artifact graph mermaid charts
* Update output
* Change node path display to be only comments
* Update output
* Update output after rebase
* Declare std::offsetPlane in KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Use two axes to define planes in KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Turn on uom checks
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Convert all lengths to mm for engine calls
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* wip
* sketch a bit more; going to pull this out of tests next
* wip
* lock start things
* this was a bad idea
* Revert "this was a bad idea"
This reverts commit a2092e7ed6.
* prepare prelude before spawning
* error
* poop
* yike
* :(
* ok
* Reapply "this was a bad idea"
This reverts commit fafdf41093.
* chip away more
* man this is bad
* fix rebase add feature flag
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* get rid of execution kind
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* clippy
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* logs
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* no extra executes
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* race w batch
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* cluppy
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* no printlns
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* no printlns
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fix source ranges
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* batch shit
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fix
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fix some bugs
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fix error
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* cut 1
* preserve mem
* re-ad deep_clone
the helper we were calling was pushing a new call, which was hanging
out. we can skip the middleman since we already have something properly
prepared, just without a stdlib in some cases.
* skip non-kcl
* clean up source range bug
* error message changed
the uuids also changed because the error is hit before execute even
starts.
* typo
* rensnapshot a few
* order things
* MAYBE REVERT LATER:
attempt at an ordering
* snapsnap
* Revert "snapsnap"
This reverts commit 7350b32c7d.
* Revert "MAYBE REVERT LATER:"
This reverts commit ab49f3e85f.
* ugh
* poop
* poop2
* lint
* tranche 1
* more
* more snaps
* snap
* more
* update
* MAYBE REVERT THIS
* cache multi-file
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* addd tests
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* set to false
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* add test outputs
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* clippy
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* kcl-py-bindings uses carwheel
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* update snapshots
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com>
Co-authored-by: Paul R. Tagliamonte <paul@zoo.dev>
Co-authored-by: Paul Tagliamonte <paultag@gmail.com>
* first draft of making segment snap to previous arc's last tangent
* ability to force/disable line snap, threshold in screen space
* mouseEvent refactor tsc errors fixed
* cleanups, extract getTanPreviousPoint function
* add snap line support when previous segment is ARC
* small cleanups
* remove unused planeNodePath param from onDragSegment
* renaming
* Enable snapping when placing the segment point in onClick
* refactor getSnappedDragPoint to include axis intersection
* handle snapping to both axis and tangent direction
* snap refinements
* small cleanups
* lint
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
* generate tag for previous arc when snapping current straight segment
* using previous arc's tag in snapped angledLine
* angledLine uses object instead of array now
* use more general snap object instead
* snap tangent line visualized when snapping occurs
* remove unused scale param from createLine
* prettier
* fix bug where segment body is not drawn
* fix generated kcl error introduced in merge from main - modifiedAst needs to be passed to addNewSketchLn
* add support for snapping to negative tangent direction
* fix findTangentDirection for THREE_POINT_ARC_SEGMENT
* fix tsc error by introducing overrideExpr
* fix missing ccw for 3 point arc, fix tan_previous_point calculation for 3 point arcs
* resolve clippy until confirmation for circle radius
* fix runtime error when drawing a 3 point arc
* add unit tests to closestPointoOnRay
* unrelated react warning fixed
* add playwright test for tangent snapping
* better fix for tan_previous_point
* fix lint
* add simulation test for tangent_to_3_point_arc
* Fix simulation test output
* Add missing simulation test output files
* fix tangent snapping bug: use current group instead of last group in activeSegments
* make testcombos.test happy
* cleanup merge
* fix merge mistake, tsc error
* update tangent_to_3_point_arc simulation test
* fix angledLine related breaking tests
* minimum distance added before snapping to tangent
* circle is always ccw regardless of the order of points for tangential info calculation
* fix snapping when different unit is used other than mm
* update test: Straight line snapping to previous tangent
* update rust snapshot test
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
Co-authored-by: Frank Noirot <frank@zoo.dev>
Co-authored-by: Jonathan Tran <jonnytran@gmail.com>
