Closes https://github.com/KittyCAD/engine/issues/3494. Thanks to @nadr0 for helping on the JS side.
If users set their units, the grid will stop auto scaling, and instead will be set to 10 of whatever unit they used.
If users set their units, and those units are metric, then it'll include a scale bar (see screenshot). Imperial units won't have that bar.
This behaviour is configurable via settings.
## Limitations
- The scale bar below the grid cannot be disabled in metric units, and cannot be enabled in imperial units
<img width="1690" alt="Screenshot 2025-06-05 at 7 51 41 PM" src="https://github.com/user-attachments/assets/c597087c-f96d-4c30-95f4-b3d8ba2b5567" />
* use face edge info for some mirrors
* add functionality for other mirror function
* Fix to create new Sketch when mirror results in a new path
* use the original ids and clone the sketches
* remove mirror param
* clippy fix
* debuggin, rm yarn
* Revert "remove mirror param"
This reverts commit a848e243f8.
* use arrbitrary edge_id as sketch mirror id
* additinoal clenaup
* Update rust/kcl-lib/src/std/mirror.rs
Co-authored-by: graphite-app[bot] <96075541+graphite-app[bot]@users.noreply.github.com>
* set .mirror for continuous case
* fix warning
* works without the for loops
* add error handling
* remove duplicate setter
* rm unused var
* clenaup
* unused import
* remove unused let
* Update snapshots
* Update snapshots
* cleanup
* update sim tests
---------
Co-authored-by: gserena <serena@zoo.dev>
Co-authored-by: Jonathan Tran <jonnytran@gmail.com>
Co-authored-by: graphite-app[bot] <96075541+graphite-app[bot]@users.noreply.github.com>
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* Add building the artifact graph in mock execution
* Update output
* Add updating the artifact graph after mock execution
* Fix spelling
* Fix to return it all the way
* Fix to not make artifact fields undefined in TS
Both human and LLMs want to write KCL code in non-English languages. This is important and we should support it.
Note that errors are currently a bit broken with non-ASCII identifiers, see #4327
* Add libm dependency
* Change to use libm for trig functions
* Remove redactions for floating point
* Update output
* Use clippy to prevent stdlib math sneaking back in
---------
Co-authored-by: Adam Chalmers <adam.chalmers@zoo.dev>
* Change to use deterministic artifact graph
* Update output to use the new order
* Fix to clear everything when scene is cleared
* Fix lots
* Update artifact graph output for the last time
* Delete unused sorting code
* Remove unneeded cfg
* Fix to preserve top-level artifacts when there's an error
* Update output after error fix
* Add better doc comments
* Remove duplicate global operations
* Update comments
* Update ignored tests that were flaky
* Update graph for new samples after rebase
* Fix test assertion message
@franknoirot @jtran and I decided that the `extrudeTwist()` function (which I added in https://github.com/KittyCAD/modeling-app/pull/7480) would be better as an optional case of the normal `extrude` function. Doing it this way means less work for the frontend team.
* Replace tag type with tagIdent and tagDecl
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Replace tagIdent with TaggedEdge and TaggedFace
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Improve docs around PI
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Refactor and polish type error messages
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Add suggestion to fix unknown numbers error
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Don't warn so often about unknown units
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Change so that operations are stored per module
* Refactor so that all modeling commands go through ExecState
* Remove unneeded PartialOrd implementations
* Remove artifact_commands from KclError since it was only for debugging
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* Add NodePath to operations
* Change to use nodePath to get pathToNode instead of sourceRange
* Add additional node path unit test
* Update output
* Fix import statement NodePaths
* Update output
* Factor into function
Previously in a member expression like `foo.x` or `foo[3]`, `foo` had to be an identifier. You could not do something like `f().x` (and if you tried, you got a cryptic error). Rather than make the error better, we should just accept any expression to be the LHS of a member expression (aka its 'object').
This does knock our "parse lots of function calls" from 58 to 55 calls before it stack overflows. But I think it's fine, we'll address this in https://github.com/KittyCAD/modeling-app/pull/6226 when I get back to it.
Closes https://github.com/KittyCAD/modeling-app/issues/7273
# Symptoms
This code produces a big ugly confusing error in the frontend, see #7340.
# Root cause
I added a new test case, with an unknown type. In `ast.snap` under `body[0].declaration.init.ty` there two different `type` fields in the AST node for the type's name, and they have conflicting values Primitive and Identifier.
<img width="602" alt="Screenshot 2025-06-03 at 4 04 55 PM" src="https://github.com/user-attachments/assets/913a0fa0-3e8d-473f-bb64-003d44915be0" />
# Solution
Change the `enum PrimitiveType` variant from `Named(Node<Identifier>)` to `Named { name: Node<Identifier> }` so that the fields nest differently.
Now the error correctly points out to the user that the type `NotARealType` can't be found. Much better error message that shows the user the problem.
# Alternative solutions
Stop the duplicated JSON fields altogether. I tried this previously in https://github.com/KittyCAD/modeling-app/pull/4369 but it was very involved, and I didn't think it was worth it. Maybe I should reopen that PR and solve this properly.
Closes#7340
Previously, `x = cos(x)` would just say "`x` is undefined". Now it says that `x` cannot be referenced in its own definition, try using a different variable instead.
To do this, I've added a new `Option<String>` field to the mod-local executor context, tracking the current variable declaration. This means cloning some strings, implying a small performance hit. I think it's fine, for the better diagnostics.
In the future we could refactor this to use a &str or store variable labels in stack-allocated strings like docs.rs/compact_str or something.
Closes https://github.com/KittyCAD/modeling-app/issues/6072
* Move some sketch functions to KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Move asserts to KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* sweep, loft -> KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Move pattern transforms to KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Only consider staight lines for colinear check
* Neaten up code and add test
* Sir, a second sphere has hit the unit test
* Update test snapshots
---------
Co-authored-by: Adam Chalmers <adam.chalmers@zoo.dev>
