* Remove deprecated syntax
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* fix one test
* fix sketch on revolved face test
* fix test: empty-scene default-planes act as expected
* fix up more tests
* another fix
* remove another const
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
Co-authored-by: Kurt Hutten Irev-Dev <k.hutten@protonmail.ch>
* Declare chamfer in KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Ignore more in the simulation tests
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Declare fillet in KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Move shell and hollow to KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Declare std::offsetPlane in KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Use two axes to define planes in KCL
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Turn on uom checks
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Convert all lengths to mm for engine calls
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* wip
* sketch a bit more; going to pull this out of tests next
* wip
* lock start things
* this was a bad idea
* Revert "this was a bad idea"
This reverts commit a2092e7ed6.
* prepare prelude before spawning
* error
* poop
* yike
* :(
* ok
* Reapply "this was a bad idea"
This reverts commit fafdf41093.
* chip away more
* man this is bad
* fix rebase add feature flag
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* get rid of execution kind
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* clippy
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* logs
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* no extra executes
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* race w batch
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* cluppy
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* no printlns
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* no printlns
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fix source ranges
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* batch shit
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fix
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fix some bugs
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fix error
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* cut 1
* preserve mem
* re-ad deep_clone
the helper we were calling was pushing a new call, which was hanging
out. we can skip the middleman since we already have something properly
prepared, just without a stdlib in some cases.
* skip non-kcl
* clean up source range bug
* error message changed
the uuids also changed because the error is hit before execute even
starts.
* typo
* rensnapshot a few
* order things
* MAYBE REVERT LATER:
attempt at an ordering
* snapsnap
* Revert "snapsnap"
This reverts commit 7350b32c7d.
* Revert "MAYBE REVERT LATER:"
This reverts commit ab49f3e85f.
* ugh
* poop
* poop2
* lint
* tranche 1
* more
* more snaps
* snap
* more
* update
* MAYBE REVERT THIS
* cache multi-file
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* addd tests
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* set to false
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* add test outputs
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* clippy
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* kcl-py-bindings uses carwheel
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* update snapshots
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com>
Co-authored-by: Paul R. Tagliamonte <paul@zoo.dev>
Co-authored-by: Paul Tagliamonte <paultag@gmail.com>
* KCL: Convert angledLineThatIntersects to use kwargs
* Update KCL tests and samples
* WIP
* Fix tsc and lint errors
* Fix missing cases
* Fix modifyAst unit tests
* Fix sketch unit tests
* Fix std unit tests
* Fix to not have extra docs
* Fix more unit tests
* Fix bench test
* Fix e2e tests to use new kw args
* tiny lint
* Fix adding constraint from UI to work
* Fix to use labeledArg constraints and use the correct order of args
* Fix selections e2e test
* Fix e2e test expectation
App was working as expected, but the e2e test was
expecting the old code, not the new code.
* Fix order of constraints in unit test
* Update docs
* Fix KCL formatting
* Update output
---------
Co-authored-by: Jonathan Tran <jonnytran@gmail.com>
* More units of measure work
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Update CSG output since engine change
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
Co-authored-by: Nick Cameron <nrc@ncameron.org>
* first steps, add to cmd bar etc
* cmdbar working well enough
* mvp
* lint
* fix after rebase
* intersect and union mvps
* add test
* some clean up
* further fix up
* Update src/lang/modifyAst/boolean.ts
Co-authored-by: Pierre Jacquier <pierrejacquier39@gmail.com>
* Update src/lang/modifyAst/boolean.ts
Co-authored-by: Pierre Jacquier <pierrejacquier39@gmail.com>
* pierre's comments
* tsc
* add comment
---------
Co-authored-by: Pierre Jacquier <pierrejacquier39@gmail.com>
* Support calling KCL std KW fns, and move circle to KCL std
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Doc comments on parameters
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Update grammar
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Change use of counterClockWise to ccw
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Support paths to names rather than just raw idents
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* Automatic fixing of deprecations and use non-quoted default planes by default
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* Parse [T] instead of T[] for array types
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* homogenous arrays, type coercion, remove solid set and sketch set, etc
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Add warning when using a module with no return value
* Update output files since changing source range of the pipeline argument
* Change wording of error message to not use the term unlabeled
Fixes https://github.com/KittyCAD/modeling-app/issues/4307
Now if you try to fillet the same edge twice in a single fillet command,
the error message is clearer, and the source range will highlight
the specific edges in the array which are duplicated.
Same goes for chamfer.
Note: although the Rust KCL interpreter sends back an array of SourceRange
for each KCL error, the frontend only puts the first one into CodeMirror
diagnostics. We should fix that: https://github.com/KittyCAD/modeling-app/issues/5754
Previous error message:
"Expected a kcl_lib::execution::geometry::SolidSet but found Sketch"
New error message:
"Expected a SolidSet but found Sketch. You can convert a sketch (2D) into a Solid (3D) by calling a function like `extrude` or `revolve`"
Two improvements:
- Don't print the fully-qualified Rust name (e.g. kcl_lib::executor::Solid) instead use the last part of that (e.g. just Solid)
- Allow specific suggestions for combinations of got/want (e.g. "You can convert a sketch (2D) into a Solid (3D) by calling a function like `extrude` or `revolve`")
Closes#5616
Previously, `xLine`, `xLineTo`, `yLine` and `yLineTo` used positional arguments. Now:
- `xLineTo` and `yLineTo` have been removed
- `xLine` and `yLine` both use keyword arguments:
- `length`, optional (i.e. a relative distance along the X or Y axis)
- `endAbsolute` optional (i.e. an absolute point along the X or Y axis)
- `tag` optional
- Exactly one of `length` or `endAbsolute` must be given. Not both, not neither.
For example:
```
// Old way
|> xLine(6.04, %)
|> yLineTo(20, %, $base)
// New way
|> xLine(length = 6.04)
|> yLine(endAbsolute = 20, tag = $base)
```
This also improves some of the general-purpose keyword arguments code in modeling app's TS codebase.
* add export test so we dont break cli / kcl.py
Signed-off-by: Jess Frazelle <github@jessfraz.com>
Overwrite created date (#5602)
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com>
