ba8f5d9785
unused vars ( #887 )
2023-10-17 05:34:35 +00:00
35b5ad7d9b
refactor selections ( #876 )
...
* migrate selection types
* extract selection event into selections.ts
* move code-mirror selection functions into selections.ts
* move more selection logit out of code mirror and engine connection
* add selection functions pure
* tidy up naming
* write a novel about how selections work
* final comments
2023-10-16 10:20:05 +00:00
8fad9ef3c2
fix vertex selection ( #869 )
2023-10-16 15:29:02 +11:00
71d1bb70ef
Fix move only working first time ( #850 )
...
* nuke fixIdMappings
* update readme
* remove sourceRangeMap as it was redundant
repeated state already covered by the artifactMap
* bug fix, name conflict
* bug fix
* update artifact map when sketch is first created
* update artifact map for line generation too
* fmt
* update move state to allow selections
* allow for selection of vertices
some what hacky, but better than nothing
* unnecessary react hook dependency
* generic react linting
* move working for non-execute case
* block partial contrained things too for now
2023-10-13 09:47:46 -07:00
2a02f6e039
New parser built in Winnow ( #731 )
...
* New parser built with Winnow
This new parser uses [winnow](docs.rs/winnow) to replace the handwritten recursive parser.
## Differences
I think the Winnow parser is more readable than handwritten one, due to reusing standard combinators. If you have a parsre like `p` or `q` you can combine them with standard functions like `repeat(0..4, p)`, `opt(p)`, `alt((p, q))` and `separated1(p, ", ")`. This IMO makes it more readable once you know what those standard functions do.
It's also more accurate now -- e.g. the parser no longer swallows whitespace between comments, or inserts it where there was none before. It no longer changes // comments to /* comments depending on the surrounding whitespace.
Primary form of testing was running the same KCL program through both the old and new parsers and asserting that both parsers produce the same AST. See the test `parser::parser_impl::tests::check_parsers_work_the_same`. But occasionally the new and old parsers disagree. This is either:
- Innocuous (e.g. disagreeing on whether a comment starts at the preceding whitespace or at the //)
- Helpful (e.g. new parser recognizes comments more accurately, preserving the difference between // and /* comments)
- Acceptably bad (e.g. new parser sometimes outputs worse error messages, TODO in #784 )
so those KCL programs have their own unit tests in `parser_impl.rs` demonstrating the behaviour.
If you'd like to review this PR, it's arguably more important to review changes to the existing unit tests rather than the new parser itself. Because changes to the unit tests show where my parser changes behaviour -- usually for the better, occasionally for the worse (e.g. a worse error message than before). I think overall the improvements are worth it that I'd like to merge it without spending another week fixing it up -- we can fix the error messages in a follow-up PR.
## Performance
| Benchmark | Old parser (this branch) | New parser (this branch) | Speedup |
| ------------- | ------------- | ------------- | ------------- |
| Pipes on pipes | 922 ms | 42 ms | 21x |
| Kitt SVG | 148 ms | 7 ms | 21x |
There's definitely still room to improve performance:
- https://github.com/KittyCAD/modeling-app/issues/839
- https://github.com/KittyCAD/modeling-app/issues/840
## Winnow
Y'all know I love [Nom](docs.rs/nom) and I've blogged about it a lot. But I'm very happy using Winnow, a fork. It's got some really nice usability improvements. While writing this PR I found some bugs or unclear docs in Winnow:
- https://github.com/winnow-rs/winnow/issues/339
- https://github.com/winnow-rs/winnow/issues/341
- https://github.com/winnow-rs/winnow/issues/342
- https://github.com/winnow-rs/winnow/issues/344
The maintainer was quick to close them and release new versions within a few hours, so I feel very confident building the parser on this library. It's a clear improvement over Nom and it's used in toml-edit (and therefore within Cargo) and Gitoxide, so it's becoming a staple of the Rust ecosystem, which adds confidence.
Closes #716
Closes #815
Closes #599
2023-10-12 09:42:37 -05:00
d0930477ad
xstate migration ( #713 )
...
* Add basic Popover functionality
* Fix up light mode of basic bar
* Add support for 2D and 3D mode styling
* Turn toolbar buttons back on
* Remove ActionButton until after tool logic refactor
* Add transitions
* Add initial modeling machine
This is not a full description of how the modelingMachine should work,
but begins to replicate all of the features of our useStore in XState
instead of zustand.
* Add fillet tool flow
* Refactor: break out engine manager setup into hook
Preparing for making a wrapper component around the App
that will manage the engine manager at the same level as
the modelingMachine.
* Create modeling provider, move engine management to it
* Refactor: move other engine-related useEffect into hook
* Add TS schema, selection actions to modelingMachine
* Add barebones modeling machine to app
Only implementing adding to code-based selections in the text editor so far
* Update moved useEffect hook after merge
* give myself reminder TODO
* fix engineCommandManager waitForReady Promise
* enable devtools
* make utility class for handling default planes
* progresson startNewSketch and EditSketch
* add provider to tests
* too large of a commit
put all of the lang state into another singleton, but did lots of work on xstate too
* fix edit sketch ast issue
* re-execute on sketch exit
* prettierignore xstate typegen file
* add move tool button back in
* handle mouse commands with xState states
* fix move
* remove old imports
* big useStore delete
* fix some destructuring bugs
* start of constraint actions
* add horizontal/vertical distance constraints
* fix more destructuring errors
* fix
* add angle constaints
* add align vertically/horizontally constraints
* add length and equal length constraints
* rename modal states to be more cmd bar friendly
* add doesPipeHave query
* add another query
* add extrude states
* state machine clean up
* xstate layout tweak
* make xstate types happy
* Revamp cursor logic and place curors after ast mod
* Xstate merge (#796 )
* turning back on all planes (#720 )
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix more tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix stdlib
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
compile
Signed-off-by: Jess Frazelle <github@jessfraz.com >
update sample code
Signed-off-by: Jess Frazelle <github@jessfraz.com >
re-enable the planes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix all tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
boilerplate
Signed-off-by: Jess Frazelle <github@jessfraz.com >
Cut release v0.9.2 (#714 )
rust make default planes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
use the planes from engine
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
negative args
Signed-off-by: Jess Frazelle <github@jessfraz.com >
diable camera
Signed-off-by: Jess Frazelle <github@jessfraz.com >
hide planes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updatress
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fmt
Signed-off-by: Jess Frazelle <github@jessfraz.com >
Update src/hooks/useAppMode.ts
Co-authored-by: Kurt Hutten <k.hutten@protonmail.ch >
Update src/hooks/useAppMode.ts
Co-authored-by: Kurt Hutten <k.hutten@protonmail.ch >
cleanups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
Bump kittycad from 0.2.26 to 0.2.27 in /src-tauri (#726 )
Bumps [kittycad](https://github.com/KittyCAD/kittycad.rs ) from 0.2.26 to 0.2.27.
- [Release notes](https://github.com/KittyCAD/kittycad.rs/releases )
- [Commits](https://github.com/KittyCAD/kittycad.rs/compare/v0.2.26...v0.2.27 )
---
updated-dependencies:
- dependency-name: kittycad
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bump tauri-plugin-fs-extra from `b04bde3` to `6c7a4c0` in /src-tauri (#725 )
Bumps [tauri-plugin-fs-extra](https://github.com/tauri-apps/plugins-workspace ) from `b04bde3` to `6c7a4c0`.
- [Release notes](https://github.com/tauri-apps/plugins-workspace/releases )
- [Commits](b04bde3461...6c7a4c0984support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bump toml from 0.8.0 to 0.8.1 in /src-tauri (#724 )
Bumps [toml](https://github.com/toml-rs/toml ) from 0.8.0 to 0.8.1.
- [Commits](https://github.com/toml-rs/toml/compare/toml-v0.8.0...toml-v0.8.1 )
---
updated-dependencies:
- dependency-name: toml
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bump openapitor from `61a1605` to `d3e98c4` in /src/wasm-lib (#723 )
Bumps [openapitor](https://github.com/KittyCAD/kittycad.rs ) from `61a1605` to `d3e98c4`.
- [Release notes](https://github.com/KittyCAD/kittycad.rs/releases )
- [Commits](61a16059b3...d3e98c4ec0support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bump kittycad from 0.2.26 to 0.2.27 in /src/wasm-lib (#722 )
Bumps [kittycad](https://github.com/KittyCAD/kittycad.rs ) from 0.2.26 to 0.2.27.
- [Release notes](https://github.com/KittyCAD/kittycad.rs/releases )
- [Commits](https://github.com/KittyCAD/kittycad.rs/compare/v0.2.26...v0.2.27 )
---
updated-dependencies:
- dependency-name: kittycad
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bump thiserror from 1.0.48 to 1.0.49 in /src/wasm-lib (#721 )
Bumps [thiserror](https://github.com/dtolnay/thiserror ) from 1.0.48 to 1.0.49.
- [Release notes](https://github.com/dtolnay/thiserror/releases )
- [Commits](https://github.com/dtolnay/thiserror/compare/1.0.48...1.0.49 )
---
updated-dependencies:
- dependency-name: thiserror
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bump expectorate from 1.0.7 to 1.1.0 in /src/wasm-lib (#712 )
Bumps [expectorate](https://github.com/oxidecomputer/expectorate ) from 1.0.7 to 1.1.0.
- [Release notes](https://github.com/oxidecomputer/expectorate/releases )
- [Commits](https://github.com/oxidecomputer/expectorate/compare/v1.0.7...v1.1.0 )
---
updated-dependencies:
- dependency-name: expectorate
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bump clap from 4.4.4 to 4.4.5 in /src/wasm-lib (#711 )
Bumps [clap](https://github.com/clap-rs/clap ) from 4.4.4 to 4.4.5.
- [Release notes](https://github.com/clap-rs/clap/releases )
- [Changelog](https://github.com/clap-rs/clap/blob/master/CHANGELOG.md )
- [Commits](https://github.com/clap-rs/clap/compare/v4.4.4...v4.4.5 )
---
updated-dependencies:
- dependency-name: clap
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
refactor cleanup
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
type improvements
* use new sketchmode no camera
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* js working better
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* start of negative planes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* tests and neg
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* images
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* norma;s
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* better initial load of planes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* ts
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix tsc
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix edit sketch
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* add regression test for 2d solid issue
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* show planes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix clippy
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* canecel in progress
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix ci as well
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* stopping point
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* refactor
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* it works
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* Hide planes (#797 )
* hide planes in one go
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* update hide;
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* make tsc happy
* Make "Replay Onboarding" button available on home settings page (#804 )
* Fix unrelated bug, settings button in the home sidebar
doesn't go to the home settings after my previous fixes to routes
* Turn on "Replay Onboarding" button in home settings
* Use ONBOARDING_PROJECT_NAME in both places
* Fix formatting
* Cut release v0.10.0 (#803 )
Co-authored-by: Frank Noirot <frank@kittycad.io >
* Bump kittycad from 0.2.28 to 0.2.31 in /src-tauri (#798 )
Bumps [kittycad](https://github.com/KittyCAD/kittycad.rs ) from 0.2.28 to 0.2.31.
- [Release notes](https://github.com/KittyCAD/kittycad.rs/releases )
- [Commits](https://github.com/KittyCAD/kittycad.rs/compare/v0.2.28...v0.2.31 )
---
updated-dependencies:
- dependency-name: kittycad
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* Bump openapitor from `fa0345c` to `c122a9b` in /src/wasm-lib (#800 )
Bumps [openapitor](https://github.com/KittyCAD/kittycad.rs ) from `fa0345c` to `c122a9b`.
- [Release notes](https://github.com/KittyCAD/kittycad.rs/releases )
- [Commits](fa0345c514...c122a9b1d6support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* Bump syn from 2.0.37 to 2.0.38 in /src/wasm-lib (#801 )
Bumps [syn](https://github.com/dtolnay/syn ) from 2.0.37 to 2.0.38.
- [Release notes](https://github.com/dtolnay/syn/releases )
- [Commits](https://github.com/dtolnay/syn/compare/2.0.37...2.0.38 )
---
updated-dependencies:
- dependency-name: syn
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* Bump winnow from 0.5.15 to 0.5.16 in /src/wasm-lib (#799 )
Bumps [winnow](https://github.com/winnow-rs/winnow ) from 0.5.15 to 0.5.16.
- [Changelog](https://github.com/winnow-rs/winnow/blob/main/CHANGELOG.md )
- [Commits](https://github.com/winnow-rs/winnow/compare/v0.5.15...v0.5.16 )
---
updated-dependencies:
- dependency-name: winnow
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* Bump tauri-plugin-fs-extra from `fa32d1a` to `9f27e6e` in /src-tauri (#802 )
Bumps [tauri-plugin-fs-extra](https://github.com/tauri-apps/plugins-workspace ) from `fa32d1a` to `9f27e6e`.
- [Release notes](https://github.com/tauri-apps/plugins-workspace/releases )
- [Commits](fa32d1afa9...9f27e6e441support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* better plane selection
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* use the sketch plane id
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* add todo w bug
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* Improve Prop Typings for Modals. Remove instances of `any`. (#792 )
* Update typings for modals. Remove instances of `any`
* Fix generic type for creating modals
* cleanup other stuffs
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* make plane id available when selecting default plane
* few clean up things
* change enter sketch action order to make sure plane id is available to 'enter edit mode'
* Revert "Improve Prop Typings for Modals. Remove instances of `any`. (… (#813 )
Revert "Improve Prop Typings for Modals. Remove instances of `any`. (#792 )"
This reverts commit 629f326f4c#814 )
* fix some tsc stuff
* small tweak
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com >
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: Kurt Hutten Irev-Dev <k.hutten@protonmail.ch >
Co-authored-by: Frank Noirot <frank@kittycad.io >
Co-authored-by: Pierre Jacquier <pierrejacquier39@gmail.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Jason Rametta <rametta@outlook.com >
* clean up
* fix test and tsc
* remove one more thing from useStore
* tweak state digrame layout
* fmt
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com >
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: Frank Johnson <frankjohnson1993@gmail.com >
Co-authored-by: Frank Noirot <frank@kittycad.io >
Co-authored-by: Jess Frazelle <jessfraz@users.noreply.github.com >
Co-authored-by: Pierre Jacquier <pierrejacquier39@gmail.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Jason Rametta <rametta@outlook.com >
2023-10-11 13:36:54 +11:00
e1081b0ee6
turning back on all planes ( #720 )
...
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix more tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix stdlib
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
compile
Signed-off-by: Jess Frazelle <github@jessfraz.com >
update sample code
Signed-off-by: Jess Frazelle <github@jessfraz.com >
re-enable the planes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix all tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
boilerplate
Signed-off-by: Jess Frazelle <github@jessfraz.com >
Cut release v0.9.2 (#714 )
rust make default planes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
use the planes from engine
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
negative args
Signed-off-by: Jess Frazelle <github@jessfraz.com >
diable camera
Signed-off-by: Jess Frazelle <github@jessfraz.com >
hide planes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updatress
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fmt
Signed-off-by: Jess Frazelle <github@jessfraz.com >
Update src/hooks/useAppMode.ts
Co-authored-by: Kurt Hutten <k.hutten@protonmail.ch >
Update src/hooks/useAppMode.ts
Co-authored-by: Kurt Hutten <k.hutten@protonmail.ch >
cleanups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
Bump kittycad from 0.2.26 to 0.2.27 in /src-tauri (#726 )
Bumps [kittycad](https://github.com/KittyCAD/kittycad.rs ) from 0.2.26 to 0.2.27.
- [Release notes](https://github.com/KittyCAD/kittycad.rs/releases )
- [Commits](https://github.com/KittyCAD/kittycad.rs/compare/v0.2.26...v0.2.27 )
---
updated-dependencies:
- dependency-name: kittycad
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bump tauri-plugin-fs-extra from `b04bde3` to `6c7a4c0` in /src-tauri (#725 )
Bumps [tauri-plugin-fs-extra](https://github.com/tauri-apps/plugins-workspace ) from `b04bde3` to `6c7a4c0`.
- [Release notes](https://github.com/tauri-apps/plugins-workspace/releases )
- [Commits](b04bde3461...6c7a4c0984support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bump toml from 0.8.0 to 0.8.1 in /src-tauri (#724 )
Bumps [toml](https://github.com/toml-rs/toml ) from 0.8.0 to 0.8.1.
- [Commits](https://github.com/toml-rs/toml/compare/toml-v0.8.0...toml-v0.8.1 )
---
updated-dependencies:
- dependency-name: toml
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bump openapitor from `61a1605` to `d3e98c4` in /src/wasm-lib (#723 )
Bumps [openapitor](https://github.com/KittyCAD/kittycad.rs ) from `61a1605` to `d3e98c4`.
- [Release notes](https://github.com/KittyCAD/kittycad.rs/releases )
- [Commits](61a16059b3...d3e98c4ec0support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bump kittycad from 0.2.26 to 0.2.27 in /src/wasm-lib (#722 )
Bumps [kittycad](https://github.com/KittyCAD/kittycad.rs ) from 0.2.26 to 0.2.27.
- [Release notes](https://github.com/KittyCAD/kittycad.rs/releases )
- [Commits](https://github.com/KittyCAD/kittycad.rs/compare/v0.2.26...v0.2.27 )
---
updated-dependencies:
- dependency-name: kittycad
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bump thiserror from 1.0.48 to 1.0.49 in /src/wasm-lib (#721 )
Bumps [thiserror](https://github.com/dtolnay/thiserror ) from 1.0.48 to 1.0.49.
- [Release notes](https://github.com/dtolnay/thiserror/releases )
- [Commits](https://github.com/dtolnay/thiserror/compare/1.0.48...1.0.49 )
---
updated-dependencies:
- dependency-name: thiserror
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bump expectorate from 1.0.7 to 1.1.0 in /src/wasm-lib (#712 )
Bumps [expectorate](https://github.com/oxidecomputer/expectorate ) from 1.0.7 to 1.1.0.
- [Release notes](https://github.com/oxidecomputer/expectorate/releases )
- [Commits](https://github.com/oxidecomputer/expectorate/compare/v1.0.7...v1.1.0 )
---
updated-dependencies:
- dependency-name: expectorate
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bump clap from 4.4.4 to 4.4.5 in /src/wasm-lib (#711 )
Bumps [clap](https://github.com/clap-rs/clap ) from 4.4.4 to 4.4.5.
- [Release notes](https://github.com/clap-rs/clap/releases )
- [Changelog](https://github.com/clap-rs/clap/blob/master/CHANGELOG.md )
- [Commits](https://github.com/clap-rs/clap/compare/v4.4.4...v4.4.5 )
---
updated-dependencies:
- dependency-name: clap
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
refactor cleanup
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
type improvements
* use new sketchmode no camera
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* js working better
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* start of negative planes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* tests and neg
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* images
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* norma;s
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* better initial load of planes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* ts
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix tsc
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix edit sketch
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* add regression test for 2d solid issue
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* show planes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix clippy
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* canecel in progress
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix ci as well
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com >
2023-10-05 14:27:48 -07:00
a367be4e2b
add gizmo ( #738 )
...
* add gizmo
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix force ast execution
Signed-off-by: Jess Frazelle <github@jessfraz.com >
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com >
2023-09-29 12:41:58 -07:00
61943055e5
refactor a bit before more rust port ( #739 )
...
* partially there
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* cleanup
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com >
2023-09-29 11:11:01 -07:00
c307ddd1b1
resize ( #706 )
...
* start of resize
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* refactor
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* check if 0
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* will work w new lib
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* new types
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* handle resize effect
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com >
Co-authored-by: Kurt Hutten Irev-Dev <k.hutten@protonmail.ch >
2023-09-25 19:49:53 -07:00
24a31c94e7
Typo: noneCode => nonCode ( #607 )
2023-09-18 18:14:12 -05:00
5297d3e142
both edit and move in one PR ( #566 )
...
* get the data for where lines are
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* make pretty
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fmt
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* new shit
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* beginning of stufff
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* cleanup
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* add new fns
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* basic function
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix ups to keep order
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* further
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* failing test
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* do it in rust
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* trait
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* start of ui integration
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* weird shit
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* generate close on close
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* start of constraint functions
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* helper functions
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* make work
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* constraints w ranges
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fmt
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* skip
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* comment
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* throw
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* make close a bit less sensitive in move scenario
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* cleanup shit we didnt end up using
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* make it less hard to close
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* Fix edit after sketch
* Move to plane for sketch
* Fix pathToNode for ast mods
* Fix exit sketch mode with escape
* Fix fmt since my editor did it wrong
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix link
Signed-off-by: Jess Frazelle <github@jessfraz.com >
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com >
Co-authored-by: Adam Sunderland <adam@kittycad.io >
2023-09-17 21:57:43 -07:00
c5d8779af4
Update onboarding to be more complete ( #551 )
...
* Update Introduction
* Update Camera step
* Change link to expectations
Co-authored-by: Josh Gomez <114548659+jgomez720@users.noreply.github.com >
* Set outline for onboarding
* Add Streaming step
* Remove Units step
* Add default kcl script
* Add Code Editor step
* Add Parametric Modeling step
* Add Interactive Numbers step
* Update bracket to use sqrt
* Add Command K step
* Assuage @jessfraz's code itchies
* Add User Menu step
* Add Project Menu step
* Add Export step
* Improve error page to actually show error
* Update the sketch step
* Add Future Work section
* Bring back the bracket code on the final step
* Set up the code to the bracket when starting onboarding
* Fix missing import
* Don't throw away users code if not empty
* Prompt the user if they have content in their file
---------
Co-authored-by: Josh Gomez <114548659+jgomez720@users.noreply.github.com >
2023-09-16 02:37:40 +00:00
f7971bddef
Rename TooTip to ToolTip ( #541 )
2023-09-15 11:48:23 -04:00
e4f2e66029
inital rework of execution ( #528 )
...
* inital rework
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* update the program memory as well
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* cleanups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* code
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates for typing code
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixing
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* some fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* more fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* Only unselect line or move tool on escape, don't exit sketch
* Make scrollbar on toolbar smaller
* Add escape to exit sketch mode
* tidy up usestore
* clear scene on empty file
* disable sketch mode and re-execute on sketch loop close
* disable all but xy plane
* fix entering back into edit mode
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com >
Co-authored-by: Frank Noirot <frank@kittycad.io >
Co-authored-by: Kurt Hutten Irev-Dev <k.hutten@protonmail.ch >
2023-09-15 21:35:48 +10:00
2d452f80d1
ts-rs changes ( #450 )
...
* initial changes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* bust cache
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* add dumb shit
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* Revert "add dumb shit"
This reverts commit 638e9cf72f75e1ad08fb6b22d2a7b143ab7e06e5.
* Revert "bust cache"
This reverts commit fd6f53ba0757d635190aa82d4b055a83755f3027.
* fix
Signed-off-by: Jess Frazelle <github@jessfraz.com >
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com >
2023-09-13 11:10:27 +10:00
fd2ed8acbd
Sketch on plane WIP ( #309 )
...
create default planes wip
2023-09-12 22:36:47 +00:00
c5cb0e2fd4
Add "Trackpad Friendly" camera control setting inspired by Blender ( #431 )
...
* Refactor: rename CADProgram to CameraSystem
* Fix buttonDownInStream always set to 0
This is problematic because the left mouse
button ID is actually 0. If no button is
pressed we should set back to undefined.
* Fix: middle mouse button ID is 1, not 3
* Add "Trackpad Friendly" camera system setting
Signed off by Frank Noirot <frank@kittycad.io >
* Allow camera configs to be lenient on first click
2023-09-11 16:21:23 -04:00
c68fbbd89d
Make camera mouse controls configurable ( #411 )
...
* Add camera handler config object
Using definitions of camera controls of various
CAD incumbents from Onshape's onboarding.
Signed-off-by: Frank Noirot <frank@kittycad.io >
* Refactor: alphabetize settingsMachine
* Refactor: add descriptions to MouseGuards
* Refactor: don't destructure mousemove event
* Refactor: button down in stream as int, not bool
* Honor current camera control settings
* Add cameraControls to settings
* Refactor: alphabetize settings imports
* Refactor: break out cameraControls to own file
* Fix camera control setting in command bar
* Fix formatting on generated type file
* dont use "as" in App.tsx guards
Co-authored-by: Kurt Hutten <k.hutten@protonmail.ch >
* Don't use "as" in Stream.tsx
Co-authored-by: Kurt Hutten <k.hutten@protonmail.ch >
* Don't use "as" in settingsMachine.ts
Co-authored-by: Kurt Hutten <k.hutten@protonmail.ch >
* Add type to cadPrograms
Co-authored-by: Kurt Hutten <k.hutten@protonmail.ch >
* Kurt review
---------
Signed-off-by: Frank Noirot <frank@kittycad.io >
Co-authored-by: Kurt Hutten <k.hutten@protonmail.ch >
2023-09-08 10:13:35 -04:00
97a0b6a543
fix persist ( #416 )
2023-09-08 17:52:50 +10:00
3bccae492d
clear old engine ids ( #415 )
...
* clear old engine ids
* animate re-execute and deffer execution for user typing
2023-09-08 17:50:37 +10:00
0120a89d9c
Make empty defaultProjectName value impossible ( #409 )
...
* Set named const as default project name
* Refactor: move base units into settings machine
Signed off by Frank Noirot <frank@kittycad.io >
* Reset default when creating with blank name
Signed off by Frank Noirot <frank@kittycad.io >
* Make it impossible to set empty defaultProjectName
Signed off by Frank Noirot <frank@kittycad.io >
* Make it impossible to assign empty strings
to defaultProjectName
Signed off by Frank Noirot <frank@kittycad.io >
2023-09-07 21:48:51 -04:00
2604449239
lsp stuff ( #370 )
...
* initial shit
Signed-off-by: Jess Frazelle <github@jessfraz.com >
more stuff
Signed-off-by: Jess Frazelle <github@jessfraz.com >
more stuff
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
add lsp here
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
less than a million restarts but still 3
Signed-off-by: Jess Frazelle <github@jessfraz.com >
only start once
Signed-off-by: Jess Frazelle <github@jessfraz.com >
some better stuff
Signed-off-by: Jess Frazelle <github@jessfraz.com >
initial working
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
working but jank
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
cleanup
Signed-off-by: Jess Frazelle <github@jessfraz.com >
cleaner
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
operator types
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
bump version
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
udpates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
hover working
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
diagnosticcs
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
more capabilities
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix clippy
Signed-off-by: Jess Frazelle <github@jessfraz.com >
huge refactor
Signed-off-by: Jess Frazelle <github@jessfraz.com >
cleanup
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
remove debugging
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
u[dates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
version
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
u[dates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix ups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
bump
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
more passing tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
more fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
more fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fmt
Signed-off-by: Jess Frazelle <github@jessfraz.com >
start of parser
Signed-off-by: Jess Frazelle <github@jessfraz.com >
syntax highlighting is back
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
remove prints
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix clippy
Signed-off-by: Jess Frazelle <github@jessfraz.com >
refactor recast
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix cljippuy
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates;
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fix whitespace tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
Revert "updates"
This reverts commit c2c6dceb441ab8d98a590cb27bb462738f7c6df4.
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
bump
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updaetgs
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
remove printlns
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
whitespace
Signed-off-by: Jess Frazelle <github@jessfraz.com >
udpates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
up[dates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* cleanups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* some style changes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* remove things
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updares
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* syntax highlighting fix
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* remove console log
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com >
Co-authored-by: Kurt Hutten <k.hutten@protonmail.ch >
2023-09-05 16:02:27 -07:00
ad3f0fda6a
remove cmdId ( #381 )
...
* remove cmdId
* remove log
2023-09-05 20:40:50 +10:00
32d928ae0c
Franknoirot/cmd bar ( #328 )
...
* Add XState and naive ActionBar
* Add basic dialog and combobox
* Selectable commands in command bar
* Add a few (broken) file actions
* Home commands
* Add subcommand descriptions, cleanup on navigate
* Refactor: move command creation and types to lib
* Refactor to allow any machine to add commands
* Add auth to command bar, add ability to hide cmds
* Refactor: consolidate theme utilities
* Add settings as machine and command set
* Fix: type tweaks
* Fix: only allow auth to navigate from signin
* Remove zustand-powered settings
* Fix: remove zustand settings from App
* Fix: browser infinite redirect
* Feature: allow commands to be hidden per-platform
* Fix: tsc errors
* Fix: hide default project directory from cmd bar
* Polish: transitions, css tweaks
* Feature: label current value in options settings
* Fix broken debug panel UI
* Refactor: move settings toasts to actions
* Tweak: css rounding
* Fix: set default directory recursion and reload 🐞
* Refactor: move machines to their own directory
* Fix formatting
* @Irev-Dev clean-up catches, import cleanup
2023-08-29 10:31:49 +10:00
965d2b23cf
Xstate Auth migration ( #250 )
...
* auth migrate progress, web only
* wrap home in state provider
* use consistent logged spelling
* use createActorContext
* typo
* fix wraping problem
2023-08-22 05:34:20 +10:00
a8d23f5c0d
Fix lint warnings ( #289 )
2023-08-19 08:14:35 +10:00
a6d0f17970
Allow warning banner to be dismissed ( #286 )
2023-08-18 13:58:29 -04:00
ff08c30ddc
Port abstractSyntaxtTree (the Parser) to Rust/WASM 🦀 ( #207 )
...
* initial port
leafs progress
leafs progress
leafs progress
all ast with binary expressions are passing
abstractSyntaxTree replaced in all js-test
clippy
lexer?
trying to make tests happy
clean up comments etc
remove unused
lexer is needed though
re-org rust files
remove old ast
* fmt
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* rearrange test fns
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* start of returning results
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* make tests compile again
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* more errors
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* more errors
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* replace more panics
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* cleanup more unwraps
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* cleanup more unwraps
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* less unwraps
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix clippy
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixups
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* deps
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix some tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix some tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix more tests
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* passing
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* up[date
Signed-off-by: Jess Frazelle <github@jessfraz.com >
* fix
Signed-off-by: Jess Frazelle <github@jessfraz.com >
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com >
Co-authored-by: Jess Frazelle <github@jessfraz.com >
2023-08-18 02:37:52 -07:00
19761baba6
Home page in desktop, separate file support ( #252 )
...
* Bugfix: don't toast on every change of defaultDir
* Refactor app to live under /file/:id
* Stub out Tauri-only home page
* home reads and writes blank files to defaultDir
* Fix initial directory creation
* Make file names editable
* Refactor onboarding to use normal fns for load issues
* Feature: load and write files to and from disk
* Feature: Add file deletion, break out FileCard component
* Fix settings close URLs to be relative, button types
* Add filename and link to AppHeader
* Style tweaks: scrollbar, header name, card size
* Style: add header, empty state to Home
* Refactor: load file in route loader
* Move makePathRelative to lib to fix tests
* Fix App test
* Use '$nnn' default name scheme
* Fix type error on ActionButton
* Fix type error on ActionButton
* @adamchalmers review
* Fix merge mistake
* Refactor: rename all things "file" to "project"
* Feature: migrate to <project-name>/main.kcl setup
* Fix tsc test
* @Irev-Dev review part 1: renames and imports
* @Irev-Dev review pt 2: simplify file list refresh
* @Irev-Dev review pt 3: filter out non-projects
* @Irev-review pt 4: folder conventions + home auth
* Add sort functionality to new welcome page (#255 )
* Add todo for Sentry
2023-08-15 21:56:24 -04:00
968a67e654
Add support for system theme ( #245 )
...
* Add support for 'system' theme value
* Add ability to set theme to 'system' in settings
* Fix tsc errors for Theme
2023-08-09 13:57:07 -04:00
8ebb8b8b94
re implement selections ( #243 )
2023-08-09 20:49:10 +10:00
391f4ba206
Implement "floating windows" style UI ( #224 )
...
* Basic transparent pane styling
* HTML and static asset cleanup
* Convert to collapsibles
* Polish up DebugPanel
* Add hotkey support, remove allotment
* Remove allotment css dependency
* Merge in from main
* Add a different resizable package
* Fix tsc errors introduced by merge
* Stream has to have at least z-index of 0
* App header has to be above stream z-index
* Applied z-index to the wrong element
* Scrollable logs, disable UI while dragging
* Fix test errors from importing CSS Modules in Jest
* Persist open panes configuration
* Style tweaks and fix camera step in onboarding
* Kurt review, make click-drag handler declarative
2023-08-07 11:29:26 +10:00
8c5d7bf648
Display KCL errors as CodeMirror diagnostics in the editor's gutter ( #197 )
...
Also updates the CodeMirror version
2023-08-03 15:56:11 -05:00
aabb88ee45
Add tests for various user profile setups to sidebar ( #212 )
...
* Add tests for various user profile setups to sidebar
* Don't show empty user image if it isn't there
* @adamchalmer review
2023-08-01 13:23:17 -04:00
c31f1ad98b
Add dark mode ( #199 )
...
* Add passive dark mode to everything but codemirror
* Add dark theme support for Codemirror
* Make theme a user setting
* Fix button text size
* guard against undefined window
* Formatting and test fix
2023-07-31 20:33:10 +10:00
894bddb369
Add user menu sidebar ( #195 )
2023-07-27 18:59:40 -04:00
be7605cdef
Git pre-push hook to check formatting ( #200 )
...
Add formatting check to Git pre-push hook
2023-07-27 12:13:51 -05:00
aca9b9226c
Reset KCL logs ( #198 )
2023-07-26 18:16:20 -05:00
0d010b60e5
Collect structured errors from parsing/executing KCL ( #187 )
...
Currently, syntax/semantic errors in the user's source code result in vanilla JS exceptions being thrown, so they show up in the console. Instead, this PR:
- Adds a new type KCLError
- KCL syntax/semantic errors when parsing/executing the source code now throw KCLErrors instead of vanilla JS exceptions.
- KCL errors are caught and logged to a new "Errors" panel, instead of the browser console.
2023-07-26 14:10:30 -05:00
6838e96723
Run yarn prettier, check it in CI ( #192 )
2023-07-26 11:47:18 -05:00
d1e7cb23a1
Tweak default value for onboardingStatus ( #190 )
2023-07-25 10:51:34 -04:00
9cd3845975
Franknoirot/add walkthrough ( #189 )
...
* Barebones onboarding triggering and resetting
* Make onboarding route-based
* Add Camera step, highlighting camera feed
* Implement redirect behavior
* Unify navigation hooks
* Formatting
* add useResizeObserver, convert to custom hook
2023-07-25 10:40:26 -04:00
48f1d5e623
Add unit setting ( #183 )
...
* Add Toggle component
* Add default units to settings
* Add defaultBaseUnit, shorten settings names
* Make debug panel use Toggle, fix colors
* add eslint-plugin-css-modules
2023-07-21 12:48:23 -04:00
87aecf7f50
Integrate sketch mode debug ( #186 )
...
integrate sketch mode debug
2023-07-21 16:53:06 +10:00
59fa51d75a
Add settings UI page ( #171 )
...
* Add theme colors from Figma
* Rough-in of AppHeader
* Add styled ActionButton
* Add react-router and placeholder Settings page
* Add ability to set persistent defaultDir
* Add react-hot-toast for save success message
* Add defaultProjectName setting
* Handle case of stale empty defaultDir in storage
* Wrap app in BrowserRouter
* Wrap test App in BrowserRouter
* Don't need BrowserRouter outside of testing
because we use RouterProvider
2023-07-13 07:22:08 -04:00
3fc4d71a1e
move ast types into seperate ts file ( #169 )
2023-07-13 16:57:22 +10:00
317dc6d0b2
rough tauri auth ( #167 )
2023-07-11 20:34:09 +10:00
3510abfcb9
delay execute till after stream ready ( #143 )
2023-06-23 14:19:15 +10:00
2d3c73d46a
asyncronise executor ( #115 )
...
* Intital async of executor
The execture now sends websocket message instead of calling functions
directly from the engine, When it does so it holds onto the id.
The engine is still returning geo/polys directly but I'm working make it
so that the UI doesn't need to know about that, so that we can switch
over the streaming ui.
Things left to do:
- it is still making both direct function calls and websockets, and the former should be removed.
- It does highlighting of segments and sourceRanges not through websockets and that needs to be fixed.
- Tests have not been adjusted for these changes.
- Selecting the head of a segment is not working correctly again yet.
* Rough engine prep changes (#135 )
* rough changes for engine prep
* mouse movements working again
* connect to engine for startsketch, line, close and extrude
2023-06-22 16:43:33 +10:00
