57b366b2d080db8bc8a1cd8fcb718ec07c8b7736
24 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
| 834f7133d8 |
Allow multiple profiles in the same sketch (#5196)
* Revert "Revert multi-profile (#4812)"
This reverts commit
|
|||
| f7ee248a26 |
Fix to use more accurate types with custom isArray() and add lint (#5261)
* Fix to use more accurate types with custom isArray() * Add lint against Array.isArray() |
|||
| 8397405998 |
KCL: Use keyword arguments for line, lineTo, extrude and close (#5249)
Part of #4600. PR: https://github.com/KittyCAD/modeling-app/pull/4826 # Changes to KCL stdlib - `line(point, sketch, tag)` and `lineTo(point, sketch, tag)` are combined into `line(@sketch, end?, endAbsolute?, tag?)` - `close(sketch, tag?)` is now `close(@sketch, tag?)` - `extrude(length, sketch)` is now `extrude(@sketch, length)` Note that if a parameter starts with `@` like `@sketch`, it doesn't have any label when called, so you call it like this: ``` sketch = startSketchAt([0, 0]) line(sketch, end = [3, 3], tag = $hi) ``` Note also that if you're using a `|>` pipeline, you can omit the `@` argument and it will be assumed to be the LHS of the `|>`. So the above could be written as ``` sketch = startSketchAt([0, 0]) |> line(end = [3, 3], tag = $hi) ``` Also changes frontend tests to use KittyCAD/kcl-samples#139 instead of its main The regex find-and-replace I use for migrating code (note these don't work with multi-line expressions) are: ``` line\(([^=]*), %\) line(end = $1) line\((.*), %, (.*)\) line(end = $1, tag = $2) lineTo\((.*), %\) line(endAbsolute = $1) lineTo\((.*), %, (.*)\) line(endAbsolute = $1, tag = $2) extrude\((.*), %\) extrude(length = $1) extrude\(([^=]*), ([a-zA-Z0-9]+)\) extrude($2, length = $1) close\(%, (.*)\) close(tag = $1) ``` # Selected notes from commits before I squash them all * Fix test 'yRelative to horizontal distance' Fixes: - Make a lineTo helper - Fix pathToNode to go through the labeled arg .arg property * Fix test by changing lookups into transformMap Parts of the code assumed that `line` is always a relative call. But actually now it might be absolute, if it's got an `endAbsolute` parameter. So, change whether to look up `line` or `lineTo` and the relevant absolute or relative line types based on that parameter. * Stop asserting on exact source ranges When I changed line to kwargs, all the source ranges we assert on became slightly different. I find these assertions to be very very low value. So I'm removing them. * Fix more tests: getConstraintType calls weren't checking if the 'line' fn was absolute or relative. * Fixed another queryAst test There were 2 problems: - Test was looking for the old style of `line` call to choose an offset for pathToNode - Test assumed that the `tag` param was always the third one, but in a kwarg call, you have to look it up by label * Fix test: traverse was not handling CallExpressionKw * Fix another test, addTagKw addTag helper was not aware of kw args. * Convert close from positional to kwargs If the close() call has 0 args, or a single unlabeled arg, the parser interprets it as a CallExpression (positional) not a CallExpressionKw. But then if a codemod wants to add a tag to it, it tries adding a kwarg called 'tag', which fails because the CallExpression doesn't need kwargs inserted into it. The fix is: change the node from CallExpression to CallExpressionKw, and update getNodeFromPath to take a 'replacement' arg, so we can replace the old node with the new node in the AST. * Fix the last test Test was looking for `lineTo` as a substring of the input KCL program. But there's no more lineTo function, so I changed it to look for line() with an endAbsolute arg, which is the new equivalent. Also changed the getConstraintInfo code to look up the lineTo if using line with endAbsolute. * Fix many bad regex find-replaces I wrote a regex find-and-replace which converted `line` calls from positional to keyword calls. But it was accidentally applied to more places than it should be, for example, angledLine, xLine and yLine calls. Fixes this. * Fixes test 'Basic sketch › code pane closed at start' Problem was, the getNodeFromPath call might not actually find a callExpressionKw, it might find a callExpression. So the `giveSketchFnCallTag` thought it was modifying a kwargs call, but it was actually modifying a positional call. This meant it tried to push a labeled argument in, rather than a normal arg, and a lot of other problems. Fixed by doing runtime typechecking. * Fix: Optional args given with wrong type were silently ignored Optional args don't have to be given. But if the user gives them, they should be the right type. Bug: if the KCL interpreter found an optional arg, which was given, but was the wrong type, it would ignore it and pretend the arg was never given at all. This was confusing for users. Fix: Now if you give an optional arg, but it's the wrong type, KCL will emit a type error just like it would for a mandatory argument. --------- Signed-off-by: Nick Cameron <nrc@ncameron.org> Co-authored-by: Nick Cameron <nrc@ncameron.org> Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com> Co-authored-by: Frank Noirot <frank@kittycad.io> Co-authored-by: Kevin Nadro <kevin@zoo.dev> Co-authored-by: Jonathan Tran <jonnytran@gmail.com> |
|||
| 9e1136195a |
Fix: Center rectangle now works again, works with new LiteralValue structure (#5172)
* fix: new Literal data structure update * fix: updated the LiteralValue dereferencing and added some type narrowing helpers * fix: updating formatting * A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores) * fix: implementing a safer dereference method until we update createLiteraly() * A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores) * why is this fallback here * fix: updating the type narrowing function * fix: restore this... see if snapshots trigger again * A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores) * bump * bump * Add number with units formatting as KCL (#5195) * Add number with units formatting as KCL * Change type assertion helper to check what we need * Fix rectangle unit test * fix: adding a wait for execution to prevent clicking before lines are rendered --------- Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com> Co-authored-by: Jonathan Tran <jonnytran@gmail.com> |
|||
| 0698432abf |
Rust artifact graph (#5068)
* Start porting artifact graph creation to Rust * Add most of artifact graph creation * Add handling loft command from recent PR * Refactor artifact merge code so that it errors when a new artifact type is added * Add sweep subtype * Finish implementation of build artifact graph * Fix wasm.ts to use new combined generated ts-rs file * Fix Rust lints * Fix lints * Fix up replacement code * Add artifact graph to WASM outcome * Add artifact graph to simulation test output * Add new artifact graph output snapshots * Fix wall field and reduce unreachable code * Change field order for subtype * Change subtype to be determined from the request, like the TS * Fix plane sweep_id * Condense code * Change ID types to be properly optional * Change to favor the new ID, the same as TS * Fix to make error impossible * Rename artifact type tag values to match TS * Fix name of field on Cap * Update outputs * Change to use Rust source range * Update output snapshots * Add conversion to mermaid mind map and add to snapshot tests * Add new mermaid mind map output * Add flowchart * Remove raw artifact graph from tests * Remove JSON artifact graph output * Update output file with header * Update output after adding flowchart * Fix flowchart to not have duplicate edges, one in each direction * Fix not not output duplicate edges in flowcharts * Change flowchart edge style to be more obvious when a direction is missing * Update output after deduplication of edges * Fix not not skip sketch-on-face artifacts * Add docs * Fix edge iteration order to be stable * Update output after fixing order * Port TS artifactGraph.test.ts tests to simulation tests * Add grouping segments and solid2ds with their path * Update output flowcharts since grouping paths * Remove TS artifactGraph tests * Remove unused d3 dependencies * Fix to track loft ID on paths * Add command ID to error messages * Move artifact graph test code to a separate file since it's a large file * Reduce function visibility * Remove TS artifact graph code * Fix spelling error with serde * Add TODO for edge cut consumed ID * Add comment about mermaid edge rank * Fix mermaid flowchart edge cuts to appear as children of their edges * Update output since fixing flowchart order * Fix to always build the artifact graph even when there's a KCL error * Add artifact graph to error output * Change optional ID merge to match TS * Remove redundant SourceRange definition * Remove Rust-flavored default source range function * Add helper for source range creation * Update doc comment for the website * Update docs after doc comment change * Fix to save engine responses in execution cache * Remove unused import * Fix to not call WASM function before beforeAll callback is run * Remove more unused imports |
|||
| efe8089b08 |
Revert multi-profile (#4812)
* Revert "multi-profile follow up. (#4802)" This reverts commit |
|||
| 04e586d07b |
multi profile (#4532)
* multi-profile work * another test * clean up * cover a quirk with a test * last of tests * fix typos * Fix source range in snap test --------- Co-authored-by: Jonathan Tran <jonnytran@gmail.com> |
|||
| 59e0df7879 |
Selections Refactor (#4381)
* selection stuff
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest)
* trigger CI
* fix bugs
* some edge cut stuff
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* fix sketch mode issues
* fix more tests, selection in sketch related
* more test fixing
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger ci
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger ci
* more sketch mode selection fixes
* fix unit tests
* rename function
* remove .only
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* lint
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* fix bad pathToNode issue
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* fix sketch on face
* migrate a more selections types
* migrate a more selections types
* fix code selection of fillets
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* fix bad path to node, looks like a race
* migrate a more selections types
* migrate a more selections types
* fix cmd bar selections
* fix cmd bar selections
* fix display issues
* migrate a more selections types
* Revert "migrate a more selections types"
This reverts commit
|
|||
| 14ba66378d |
Nadro/adhoc/center rectangle (#4480)
* fix: big commit, doing this to save work then do a PR cleanup; center rectangle * fix: making a center function for each scenario * fix: reverting the update rectangle code since I have a center rectangle one * fix: does not allow seletcing circle or rectangle tool while selecting a face * chore: adding comment to better read the HTML * fix: cleaning up for PR * fix: pushing broken code for someone to checkout * fix: fixed the typescript issues, removed the as keyword for my center rectangle expressions * fix: removing comment * fix: removed as for type narrowing checks |
|||
| 579151a9bb |
Sketch on chamfer UI (#3918)
* sketch on chamfer start * working * step app from getting in weird state when selection face to sketch on * sketch on chamfer tests * clean up * fix test * fix click selections for chamfers, add tests * fixture setup (#3964) * initial break up * rename main fixture file * add more expect state pattern * add fixture comment * add comments to chamfer function * typos * works without pipeExpr |
|||
| e5bec2140e |
ArtifactGraph reThink (PART 3) (#3140)
* adjust engine connection to opt out of webRTC connection * refactor start and test setup * add env to unit test * spell config update * fix beforeAll order bug * initial integration of new artifact map with tests passing * remove old artifact map and clean up * graph artifact map * have graph commited * have graph commited * remove bad file * install playwright * fmt * commit permissions * typo * flesh out tests more * Look at this (photo)Graph *in the voice of Nickelback* * multi highlight * redo image logic * add in solid 2d data into artifactMap * fix snapshots * stabiles graph images * Look at this (photo)Graph *in the voice of Nickelback* * tweak tests * rename blend to edgeCut * Look at this (photo)Graph *in the voice of Nickelback* * fix playw tests * start of artifact map rename to graph * rename file * rename test * rename clearup * comments * docs * docs proof read * few tweaks here and there * typos * delete get parent logic * nit, combine if statements * remove unused param * fix silly test bug * rename surfId to sufaceId * rename types * update comments * add comment * add extra check * Look at this (photo)Graph *in the voice of Nickelback* * pull out merge artifact function * update comments * fix test * fmt --------- Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com> |
|||
| e3b8807d6f | Fix to preserve types using structuredClone (#3113) | |||
| 95781143eb |
ArtifactMap should be processed at the end of an execution (PART 2) (#3121)
* seperate out artifactmap functions into seperate file, change types quiet a bit with e2e still passing * more type changes * another increment * cull artifact map * remove excessive parentIds * rename props * final clean up * unused vars |
|||
| f4877cb160 |
Stop throwing in frontend code (#2654)
Return error instead of throw |
|||
| 8194f8b70b |
allow for editing a sketch where extrude or revolve is in the same pipe (#2749)
* allow for editing a sketch where extrude or revolve is in the same pipe Signed-off-by: Jess Frazelle <github@jessfraz.com> * update tests Signed-off-by: Jess Frazelle <github@jessfraz.com> * add playwright test for extrude Signed-off-by: Jess Frazelle <github@jessfraz.com> * add test for revolve Signed-off-by: Jess Frazelle <github@jessfraz.com> * remove log Signed-off-by: Jess Frazelle <github@jessfraz.com> --------- Signed-off-by: Jess Frazelle <github@jessfraz.com> |
|||
| bd16902f02 |
fix single selection angle constraint (#2555)
* fix single selection angle constraint * fix angle for multi selections * make test more robust for makos |
|||
| f640f7a5e0 |
Client sketch scene (#1271)
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* make tsc happ
* better error msg
* fix control point issue
* basic code gen working for tangentialArc
* partical fix for move with arcs
* tangential arc move
* fix
* make eslint rules less annoying
* inital refactor of some xstate stuff
* more old tangential arc clean up stuff
* more tweaks
* add testing
* tweak xstate inspect
* temp remove test
* update formating for less conflicts
* fix state machine layout after merge
* shrug, something weird with xstate typegen
* renaming some xstate events
* tweak numbers to make CI playwright happ
* CI hacks
* more CI hacks
* more CI hacks
* new hack strategy
* run tests agian
* make cmd bar less flaky
* ci hacks
* CI hacks
* CI hacks
* CI hacks
* clean up
* fix
* still have constraint stuff to deal with
* progress on move rules
* update source ranges after no execute code-mod
* typo
* mvp working
* hide show sketch overlay
* match scaling
* update arrow head style
* animate line tool
* bypass xstate for animations, much smoother
* add new segment working with refactor needed for setup paper sketch
* refactor setup paper sketch
* tangantialArcTo drag animations working
* tangential arc polish
* cargo fmt
* clippy
* more clippy
* mock canvas
* last of clippy?
* typo
* more clippy stuff
* move util function so they are shareable with typescript
* migrate a bunch to rust and only rust
* add arc center point for draft tangential ac
* clippy tweak
* delete uneeded test
* Rough start to scaling arrow heads.
The tangent arrow heads are basically nuked and replaced while the
straight line sections are just rotated and repositioned, this means they
miss out on updating scaling number after a screen size changes.
Needs fixing
* fix bug with tool tips
* fix draft line start position
Having drag the end of teh path before selecting a tooltip would result in the draft line starting where the path used to end, stale data
* some progress with pan maybe
* fmt
* inital camera sync working
For perspective camera at least
* change three.js to use z-up
* add grid
* orthographic camera working with polish items TODO
* fix zoom level when swapping camera
* fix up camera/orbit changing on cam change (pan wasn't being respected)
* tidy up
* use orbit target instead of assuming scene center
* dynamic fov working
* animate orthographic to perspective and reverse
* fix import
* temp fix for batch commands
* initial client side scene sketch working
* remove hover log
* FOV adjust fix
* fix comment
* tear down sketch and small tweaks
* some progress with camera tweening
* combine dollyZoom engine commands
see
https://github.com/KittyCAD/modeling-api/compare/kurt-perspective-settings?expand=1
and
https://github.com/KittyCAD/engine/compare/kurt-perspective-settings?expand=1
* make tests happy (mocks)
* fix tween to vertical/camera-up bug
* tween to each axis with hacky solutions in there
* fix startSketchOn planes
* tidy startSketchOn
* tweening okay for now I think
* get sketching on default planes working
* allow editing on all default planes
* clean up enter and exit sketch logic
* tidy
* tidy
* remove more default plane stuff
* start of draft line
* remove some annoying parts of the paper.js implementation
* fix drag than equip line bug
* comment
* don't animate on skech tear down since it's used for draft line
* remove more default plane shit
* style draft line
* refine dashed line
* draft line set up and tear down mostly happy
* add on click logic ready for draft lines
* sketch mode with drag and draft mode working solidly now, straight segments only
* default planes match colors, hover and select still TODO
* hover and click logic working for default planes
Now just need the code mode to fire to 'startSketchOn(...)'
* select default planes
* remove some logs
* fix update infinite loop
* start of orbitControls port to Franks control guards
* hiding scenes at different times
* scene hide on camera move should be respected by scroll zoom
* basic hover working
* Hook up user camera settings to ClientSideScene (#1334)
* Refactor to not import utilities from Router.tsx
* Stop tracking changes or formatting *.typegen.ts
* Hook up cameraControls to ClientSideScene
* Remove camera controls toggle from temp debug panel
---------
Co-authored-by: Kurt Hutten Irev-Dev <k.hutten@protonmail.ch>
* add select segment moves cursor
* highlight segments yellow on hover
* cursor ranges effect 2d line colors
* fix constrainst i.e. make sure the sketch is rejiged
* selecting nothing should remove selections
* remove hardcoded strings
* update get_tangential_arc_to_info rust util
* initial drawing of tangential arcs in client scene
* fix tangentialArc arrow head direction
* correct userData types for tangential arcs
* get tangential arc updates working
Doesn't include draging the head of the tangential arc itself yet
* spot of clean up
* make selections work with tangential arcs
* get draft tangential segment animated
* fix initial click weirdness for adding new tangential line
* couple tweaks
* add grace pixels /threshold to raycast
* redo arc dashes so that they spawn from the ccenter of the arc
* fix multi drag bug
* fmt
* add temp solution for close
* add default axis hover colors, still needs select logic
* selection of axis works, just with out selection color
* get axis selection colors working
* fix outdate source ranges after drag problem
* update moreNodePathFromSourceRange
* fix ts-rs issue/workaround
* fix default plane weirdness
* fix tangential arc rounding issue
* review clean up part 1
* review clean up part 2
Big state-diagram cull
* clippy
* typo
* clippy
* fix xstate types with typegen
* fix types
* clippy
* catch error
* fix test import issue
Not sure exactly what was happening but guessing circular import that vite didn't like
* add axis/plane info to sketch group tests
* case changes because of rs-ts bug, can probably revert this later
* start of playwright test fixes
* reduce geo complexity for straight segments
* fix cam adjust tests
* Revert "Clean up vite build warnings (#1332)"
This reverts commit
|
|||
| 35b5ad7d9b |
refactor selections (#876)
* migrate selection types * extract selection event into selections.ts * move code-mirror selection functions into selections.ts * move more selection logit out of code mirror and engine connection * add selection functions pure * tidy up naming * write a novel about how selections work * final comments |
|||
| 6c15a743a2 | remove useAppMode hook file (#829) | |||
| d0930477ad |
xstate migration (#713)
* Add basic Popover functionality * Fix up light mode of basic bar * Add support for 2D and 3D mode styling * Turn toolbar buttons back on * Remove ActionButton until after tool logic refactor * Add transitions * Add initial modeling machine This is not a full description of how the modelingMachine should work, but begins to replicate all of the features of our useStore in XState instead of zustand. * Add fillet tool flow * Refactor: break out engine manager setup into hook Preparing for making a wrapper component around the App that will manage the engine manager at the same level as the modelingMachine. * Create modeling provider, move engine management to it * Refactor: move other engine-related useEffect into hook * Add TS schema, selection actions to modelingMachine * Add barebones modeling machine to app Only implementing adding to code-based selections in the text editor so far * Update moved useEffect hook after merge * give myself reminder TODO * fix engineCommandManager waitForReady Promise * enable devtools * make utility class for handling default planes * progresson startNewSketch and EditSketch * add provider to tests * too large of a commit put all of the lang state into another singleton, but did lots of work on xstate too * fix edit sketch ast issue * re-execute on sketch exit * prettierignore xstate typegen file * add move tool button back in * handle mouse commands with xState states * fix move * remove old imports * big useStore delete * fix some destructuring bugs * start of constraint actions * add horizontal/vertical distance constraints * fix more destructuring errors * fix * add angle constaints * add align vertically/horizontally constraints * add length and equal length constraints * rename modal states to be more cmd bar friendly * add doesPipeHave query * add another query * add extrude states * state machine clean up * xstate layout tweak * make xstate types happy * Revamp cursor logic and place curors after ast mod * Xstate merge (#796) * turning back on all planes (#720) * updates Signed-off-by: Jess Frazelle <github@jessfraz.com> tests Signed-off-by: Jess Frazelle <github@jessfraz.com> fix more tests Signed-off-by: Jess Frazelle <github@jessfraz.com> fixes Signed-off-by: Jess Frazelle <github@jessfraz.com> fix stdlib Signed-off-by: Jess Frazelle <github@jessfraz.com> fix tests Signed-off-by: Jess Frazelle <github@jessfraz.com> fixes Signed-off-by: Jess Frazelle <github@jessfraz.com> updates Signed-off-by: Jess Frazelle <github@jessfraz.com> updates Signed-off-by: Jess Frazelle <github@jessfraz.com> compile Signed-off-by: Jess Frazelle <github@jessfraz.com> update sample code Signed-off-by: Jess Frazelle <github@jessfraz.com> re-enable the planes Signed-off-by: Jess Frazelle <github@jessfraz.com> fix tests Signed-off-by: Jess Frazelle <github@jessfraz.com> fix tests Signed-off-by: Jess Frazelle <github@jessfraz.com> fix tests Signed-off-by: Jess Frazelle <github@jessfraz.com> fix tests Signed-off-by: Jess Frazelle <github@jessfraz.com> fix tests Signed-off-by: Jess Frazelle <github@jessfraz.com> fix tests Signed-off-by: Jess Frazelle <github@jessfraz.com> fix tests Signed-off-by: Jess Frazelle <github@jessfraz.com> updates Signed-off-by: Jess Frazelle <github@jessfraz.com> fix all tests Signed-off-by: Jess Frazelle <github@jessfraz.com> updates Signed-off-by: Jess Frazelle <github@jessfraz.com> boilerplate Signed-off-by: Jess Frazelle <github@jessfraz.com> Cut release v0.9.2 (#714) rust make default planes Signed-off-by: Jess Frazelle <github@jessfraz.com> updates Signed-off-by: Jess Frazelle <github@jessfraz.com> use the planes from engine Signed-off-by: Jess Frazelle <github@jessfraz.com> fixups Signed-off-by: Jess Frazelle <github@jessfraz.com> updates Signed-off-by: Jess Frazelle <github@jessfraz.com> fixes Signed-off-by: Jess Frazelle <github@jessfraz.com> updates Signed-off-by: Jess Frazelle <github@jessfraz.com> fixes Signed-off-by: Jess Frazelle <github@jessfraz.com> fixes Signed-off-by: Jess Frazelle <github@jessfraz.com> negative args Signed-off-by: Jess Frazelle <github@jessfraz.com> diable camera Signed-off-by: Jess Frazelle <github@jessfraz.com> hide planes Signed-off-by: Jess Frazelle <github@jessfraz.com> updates Signed-off-by: Jess Frazelle <github@jessfraz.com> updates Signed-off-by: Jess Frazelle <github@jessfraz.com> updatress Signed-off-by: Jess Frazelle <github@jessfraz.com> fmt Signed-off-by: Jess Frazelle <github@jessfraz.com> Update src/hooks/useAppMode.ts Co-authored-by: Kurt Hutten <k.hutten@protonmail.ch> Update src/hooks/useAppMode.ts Co-authored-by: Kurt Hutten <k.hutten@protonmail.ch> cleanups Signed-off-by: Jess Frazelle <github@jessfraz.com> Bump kittycad from 0.2.26 to 0.2.27 in /src-tauri (#726) Bumps [kittycad](https://github.com/KittyCAD/kittycad.rs) from 0.2.26 to 0.2.27. - [Release notes](https://github.com/KittyCAD/kittycad.rs/releases) - [Commits](https://github.com/KittyCAD/kittycad.rs/compare/v0.2.26...v0.2.27) --- updated-dependencies: - dependency-name: kittycad dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Bump tauri-plugin-fs-extra from `b04bde3` to `6c7a4c0` in /src-tauri (#725) Bumps [tauri-plugin-fs-extra](https://github.com/tauri-apps/plugins-workspace) from `b04bde3` to `6c7a4c0`. - [Release notes](https://github.com/tauri-apps/plugins-workspace/releases) - [Commits]( |
|||
| 61943055e5 |
refactor a bit before more rust port (#739)
* partially there Signed-off-by: Jess Frazelle <github@jessfraz.com> * cleanup Signed-off-by: Jess Frazelle <github@jessfraz.com> * fixes Signed-off-by: Jess Frazelle <github@jessfraz.com> * fixups Signed-off-by: Jess Frazelle <github@jessfraz.com> --------- Signed-off-by: Jess Frazelle <github@jessfraz.com> |
|||
| 25b9b4cf98 | add isReducedMotion util (#333) | |||
| 3fc4d71a1e | move ast types into seperate ts file (#169) | |||
| 15699361a0 |
Cursors should stay after a code-mod (#113)
* setup to get path to nodes back from ast-mods * fix cursor setting for constraint buttons that use transformSecondarySketchLinesTagFirst * fix cursors for constraints that use transformAstSketchLines |
