Previously in a member expression like `foo.x` or `foo[3]`, `foo` had to be an identifier. You could not do something like `f().x` (and if you tried, you got a cryptic error). Rather than make the error better, we should just accept any expression to be the LHS of a member expression (aka its 'object').
This does knock our "parse lots of function calls" from 58 to 55 calls before it stack overflows. But I think it's fine, we'll address this in https://github.com/KittyCAD/modeling-app/pull/6226 when I get back to it.
Closes https://github.com/KittyCAD/modeling-app/issues/7273
* Add sim test for any type
* Fix doc comments to match code
* Add array ascription tests
* Commit new test output
* Fix to not panic when type is undefined
* Fix to not panic on use of the any type
* Update test and generated output
* Fix error message after rebase
* Fix subtype of any
* Fix KCL to use new keyword args
* Fix to not nest MixedArray in HomArray
* Update output
* Remove all creation of MixedArray and use HomArray instead
* Rename MixedArray to Tuple
* Fix to coerce arrays the way tuples are done
* Restructure to appease the type signature extraction
* Fix TS unit test
* Update output after switch to HomArray
* Update docs
* Fix to remove edge case when creating points
* Update docs with broken point signature
* Fix display of tuples to not collide with arrays
* Change push to an array with type mismatch to be an error
* Add sim test for push type error
* Fix acription to more general array element type
* Fix to coerce point types
* Change array push to not error when item type differs
* Fix coercion tests
* Change to only flatten as a last resort and remove flattening tuples
* Contort code to appease doc generation
* Update docs
* Fix coerce axes
* Fix flattening test to test arrays instead of tuples
* Remove special subtype case for singleton coercion
* Turn on uom checks
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Convert all lengths to mm for engine calls
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* wip
* sketch a bit more; going to pull this out of tests next
* wip
* lock start things
* this was a bad idea
* Revert "this was a bad idea"
This reverts commit a2092e7ed6.
* prepare prelude before spawning
* error
* poop
* yike
* :(
* ok
* Reapply "this was a bad idea"
This reverts commit fafdf41093.
* chip away more
* man this is bad
* fix rebase add feature flag
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* get rid of execution kind
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* clippy
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* logs
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* no extra executes
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* race w batch
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* cluppy
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* no printlns
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* no printlns
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fix source ranges
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* batch shit
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fixes
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fix
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fix some bugs
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fix error
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* cut 1
* preserve mem
* re-ad deep_clone
the helper we were calling was pushing a new call, which was hanging
out. we can skip the middleman since we already have something properly
prepared, just without a stdlib in some cases.
* skip non-kcl
* clean up source range bug
* error message changed
the uuids also changed because the error is hit before execute even
starts.
* typo
* rensnapshot a few
* order things
* MAYBE REVERT LATER:
attempt at an ordering
* snapsnap
* Revert "snapsnap"
This reverts commit 7350b32c7d.
* Revert "MAYBE REVERT LATER:"
This reverts commit ab49f3e85f.
* ugh
* poop
* poop2
* lint
* tranche 1
* more
* more snaps
* snap
* more
* update
* MAYBE REVERT THIS
* cache multi-file
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* addd tests
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* set to false
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* add test outputs
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* clippy
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* kcl-py-bindings uses carwheel
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* update snapshots
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com>
Co-authored-by: Paul R. Tagliamonte <paul@zoo.dev>
Co-authored-by: Paul Tagliamonte <paultag@gmail.com>
* Support paths to names rather than just raw idents
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* Improve snapshot testing
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* A snapshot a day keeps the bugs away! 📷🐛
* A snapshot a day keeps the bugs away! 📷🐛
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
Previously, `xLine`, `xLineTo`, `yLine` and `yLineTo` used positional arguments. Now:
- `xLineTo` and `yLineTo` have been removed
- `xLine` and `yLine` both use keyword arguments:
- `length`, optional (i.e. a relative distance along the X or Y axis)
- `endAbsolute` optional (i.e. an absolute point along the X or Y axis)
- `tag` optional
- Exactly one of `length` or `endAbsolute` must be given. Not both, not neither.
For example:
```
// Old way
|> xLine(6.04, %)
|> yLineTo(20, %, $base)
// New way
|> xLine(length = 6.04)
|> yLine(endAbsolute = 20, tag = $base)
```
This also improves some of the general-purpose keyword arguments code in modeling app's TS codebase.
* Make some things a little less public
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Rename KclValue::Array to MixedArray
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Add settings to KclValue::Function
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Remove a bunch of dead code, simplifying mock exec and meaning KclValue no longer needs to deserialize
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
