* Refactor getNodePathFromSourceRange
* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores)
* Trigger CI
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* Add dry-run validation for Sweep
Fixes#5095
* Add sweep test failing validation
* Make naming more consistent with engine
* Fix tests after big rename
* Fix tsc after main merge
* feat: enable/disable free camera aka allow orbit in sketch mode mvp
* fix: removing comments
* fix: logic for enabling and disabling in and out of sketch mode
* fix: fmt, linter, tsc fixes
* fix: added comment
* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores)
* fix: current,prev check to no op the useeffect if the values are the same
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* Add dragging behavior to 3 point circle
Uses our talked about technique of calling Rust functions to calculate new
geometry coordinates and parameters. It works very well!
Need to have the modeling app show "edit sketch" still.
* Cargo fmt
* cargo fmt
* Address Jon's comments
* Fix clippy
* Dont use isNaN
* Make points easier to select (enlarge)
* Fix circle button not being activated
* Ensure efficiency of updating editor vs execution
* Make cargo clippy happy
* button
* config
* hook up with ast
* cmd bar test
* button states fix and test
* little naming fix
* xState action to actor
* remove button state test updates
* fixture-based approach
* nightly
Co-authored-by: Pierre Jacquier <pierrejacquier39@gmail.com>
* Update src/lib/toolbar.ts
Co-authored-by: Frank Noirot <frank@zoo.dev>
---------
Co-authored-by: Pierre Jacquier <pierrejacquier39@gmail.com>
Co-authored-by: Frank Noirot <frank@zoo.dev>
* Refactor 'Delete selection' as actor
Will fix#4662
* WIP logging
* WIP: working Solid3dGetExtrusionFaceInfo for loft
* Working wall deletion of loft
* Add offset plane deletion
* Add feature tree deletion of shell
* Clean up
* Revert "Clean up"
This reverts commit 214763cc2b.
* Clean up rust changes, taking the sketch with the most paths
* Working cap selection and deletion
* Clean up
* Add test for loft and offset plane deletion via selection
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-16-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-macos-8-cores)
* Set reenter: false as it was originally
* Passing test
* Add shell deletion via feature tree test
* Revert the migration to promise actor
* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores)
* Trigger CI
* Use cmd.id as solid_id after latest engine merge
* Add feature tree deletion of offset plane and fix lint
* Add feature tree deletion of loft
* Clean up
* Better comment
* Lint fix
* Remove sketch sorting
* WIP: sweep point-and-click
* Working sweep
* Add test
* Make sweep a development command
* Fix tsc error
* Clean up for review
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* feat: implemented axis or edge selection workflow in the commandbar
* fix: removing comment
* fix: removing console logs from testing
* fix: fixing lint and tsc errors
* fix: changed copy
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-16-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-16-cores)
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
Co-authored-by: Frank Noirot <frank@zoo.dev>
* Add 3-point circle tool
This adds a 1st pass for the 3-point circle tool.
There is disabled code to drag around the 3 points and redraw the circle and
a triangle created by those points. It will be enabled in a follow-up PR
when we have circle3Point in the stdlib.
For now, all it does is after the 3rd click, will insert circle center-radius
KCL code for users to modify.
* PR comments
* initial plumbing for getting the new option into the cmd-bar
* start of prompt edit
* update AI poll
* add spinner
* more prompt engineering
* add success toast, allowing user's to reject code
* select code that changed in prompt to edit
* selection in scene should not disappear when opening prompt cmd
* tweak
* fmt
* add tests
* some clean up
* clean up
* fix tests
* Remove guards from modeling commands in the toolbar
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Remove the deprecated function, update doc comment for the one still in use
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Remove more selection check functions that are no longer used
* Update E2E tests that assumed the extrude button could be disabled due to selection
* Update a few fillet tests that expected the button to disable based on selection
* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-16-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-macos-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: namespace-profile-ubuntu-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-16-cores)
* Trigger CI
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
Co-authored-by: Pierre Jacquier <pierre@zoo.dev>
* Revert "multi-profile follow up. (#4802)"
This reverts commit 2b2ed470c1.
* Revert "multi profile (#4532)"
This reverts commit 04e586d07b.
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* Re-run CI after snapshots
* Re-run CI after snapshots
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Re-run CI after snapshots
* Add `fixme` to onboarding test
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* multi-profile work
* fix enter sketch on cap
* fix coderef problem for walls and caps
* allow sketch mode entry from circle
* clean up
* update snapshot
* Look at this (photo)Graph *in the voice of Nickelback*
* trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* add test
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* fix how expression index is corrected, to make compatible with offset planes
* another test
* tweak test
* more test tweaks
* break up test to fix it hopfully
* fix onboarding test
* remove bad comment
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* multi-profile work
* another test
* clean up
* cover a quirk with a test
* last of tests
* fix typos
* Fix source range in snap test
---------
Co-authored-by: Jonathan Tran <jonnytran@gmail.com>
* selection stuff
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest)
* trigger CI
* fix bugs
* some edge cut stuff
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* fix sketch mode issues
* fix more tests, selection in sketch related
* more test fixing
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger ci
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger ci
* more sketch mode selection fixes
* fix unit tests
* rename function
* remove .only
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* lint
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* fix bad pathToNode issue
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* fix sketch on face
* migrate a more selections types
* migrate a more selections types
* fix code selection of fillets
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* fix bad path to node, looks like a race
* migrate a more selections types
* migrate a more selections types
* fix cmd bar selections
* fix cmd bar selections
* fix display issues
* feat: implementing axis selection for point and click revolve
* feat: enforcing selection of 2 options for axis rotation
* feat: added negative rotations for the revolve
* fix: fmt, tsc fixes
* migrate a more selections types
* Revert "migrate a more selections types"
This reverts commit 0d0e453bbb.
* migrate a more selections types
* clean up1
* clean up 2
* chore: improving the copy after discussing with Frank
* fix: merge main fixes
* chore: was able to add a seg to a line. Does not check if one exists already
* saving off some code
* chore: moving revolveSketch into own file for readability, improving variable names instead of node1
* chore: renaming more variables for readability
* chore: more renaming
* fix: allows creating a custom rotation on axis
* fix: added opposite edge logic and adj, need to error handle still
* fix: use other import
* feat: point and click on edges, crude implementation
* feat: implemented toast message and returned error message from validation
* fix: auto linter
* fix: addressing tsc errors
* fix: fighting typescript
* fix: cleaning up PR
* fix: trying to resolve more typescript issues
* fix: save off tsc fixes
* fix: adding comments
* fix: resolving tsc errors
* fix: tsc errors
* fix: auto linter fixes and tsc fixes
* fix:??
* fix: revolve ast works with declaration
* fix: retry logic to make sure the disable dry run actually runs
* fix: codespell typo
---------
Co-authored-by: Kurt Hutten Irev-Dev <k.hutten@protonmail.ch>
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* Extend KCL argument input
* Migrate length constraint to be a command
* Add ability for `kcl` arguments to provide an initial variable name
* Move named variable flow into command palette
* Fix one e2e test
* Remove unwanted `ZERO` behavior when length constraint has no `variableName`
* Fix issue with `getSelectionCountByType` with sketches not yet in artifactGraph
* Update broken constraint tests
* Look at this (photo)Graph *in the voice of Nickelback*
* Fix segment overlays tests, which had out-of-date selectors
* Return early from `useConvertToVariable` if no selectionRanges
* Fixup for review comment from #4677 (#4696)
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Invalidate nightly bucket files after publish (#4627)
* Invalidate nightly bucket files after publish
* Fix conflict resolution
* Add some more warnings (#4697)
* Add installation instructions for all platforms (#4592)
* Add installation instructions for all platforms
Fixes#4511
* Typo
* Typo2
* Improve linux instructions, thanks @TomPridham
Co-authored-by: Tom Pridham <pridham.tom@gmail.com>
---------
Co-authored-by: Tom Pridham <pridham.tom@gmail.com>
* Bump node to v22.12.0 (LTS) (#4706)
* Point-and-click Shell (#4666)
* WIP: experimenting with Loft UI
Relates to #4470
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Add selection guard
* Working loft for two sketches in the right hardcoded order
* First pass at handling more than 2 sketches
* WIP selections
* WIP selections
* More checks
* Appends the loft line after the 'last' sketch in the code
* Clean up
* Enable multiple selections after the button click
* First point-click loft test (not working locally, loft gets inserted at the wrong place)
* Lint
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* Clean up and working pw test
* Add test for doesSceneHaveSweepableSketch with count = 2
* Clean up loftSketches function
* Add pw test for preselected sketches
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Move to fromPromise-based Actor
* Move error logic out of loftSketches, fix pw tests
* Remove comments
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Fix typo
* Revert snapshots
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger CI
* WIP: initial shell code addition
* Rollback pw values to pre cam change
* WIP: more additions
* WIP: closer
* WIP: first time working shell mod
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* Add extrude lookup for more generic shell
* Handle walls
* Add pw tests for cap shell
* Add shell wall test
* Fix lint
* Add selection guard and clean up
* Lint fix
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* WIP mutliple faces
* WIP circular dep
* Lint
* Look at this (photo)Graph *in the voice of Nickelback*
* Trigger CI
* Working multi-face shell across types
* Cap and wall pw test
* Apply suggestions from Frank's review
Co-authored-by: Frank Noirot <frank@zoo.dev>
* Fix test annotations
* Add unit tests for doesSceneHaveExtrudedSketch
* Manual resolution of snapshot conflicts
* Fix assertParse
* Updated pathToNode construct
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
Co-authored-by: Frank Noirot <frank@zoo.dev>
* More aggressive using of cache on engine settings changes (#4691)
* move around the files for cache to better localtions
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* cleanup
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* udpates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* cleanup
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* ensure we can change the grid setting via the command bar
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* pass thru all setttings
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* updates
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* fix playwright test
Signed-off-by: Jess Frazelle <github@jessfraz.com>
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* emoty
---------
Signed-off-by: Jess Frazelle <github@jessfraz.com>
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* fix use of `as`
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
Signed-off-by: Jess Frazelle <github@jessfraz.com>
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
Co-authored-by: Nick Cameron <nrc@ncameron.org>
Co-authored-by: Pierre Jacquier <pierrejacquier39@gmail.com>
Co-authored-by: Tom Pridham <pridham.tom@gmail.com>
Co-authored-by: Jess Frazelle <jessfraz@users.noreply.github.com>
* WIP: experimenting with Loft UI
Relates to #4470
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Add selection guard
* Working loft for two sketches in the right hardcoded order
* First pass at handling more than 2 sketches
* WIP selections
* WIP selections
* More checks
* Appends the loft line after the 'last' sketch in the code
* Clean up
* Enable multiple selections after the button click
* First point-click loft test (not working locally, loft gets inserted at the wrong place)
* Lint
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* Clean up and working pw test
* Add test for doesSceneHaveSweepableSketch with count = 2
* Clean up loftSketches function
* Add pw test for preselected sketches
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Move to fromPromise-based Actor
* Move error logic out of loftSketches, fix pw tests
* Remove comments
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Fix typo
* Revert snapshots
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger CI
* WIP: initial shell code addition
* Rollback pw values to pre cam change
* WIP: more additions
* WIP: closer
* WIP: first time working shell mod
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* Add extrude lookup for more generic shell
* Handle walls
* Add pw tests for cap shell
* Add shell wall test
* Fix lint
* Add selection guard and clean up
* Lint fix
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* WIP mutliple faces
* WIP circular dep
* Lint
* Look at this (photo)Graph *in the voice of Nickelback*
* Trigger CI
* Working multi-face shell across types
* Cap and wall pw test
* Apply suggestions from Frank's review
Co-authored-by: Frank Noirot <frank@zoo.dev>
* Fix test annotations
* Add unit tests for doesSceneHaveExtrudedSketch
* Manual resolution of snapshot conflicts
* Fix assertParse
* Updated pathToNode construct
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
Co-authored-by: Frank Noirot <frank@zoo.dev>
* Parse more import syntax
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Remove unnecessary Vec from VariableDeclaration
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Parse export import
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Factor out an execution module
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* imports: constants, globs, export import
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* test fixups
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Send multiple errors and warnings to the frontend and LSP
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Refactor the parser to use CompilationError for parsing errors rather than KclError
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Refactoring: move CompilationError, etc.
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Integrate compilation errors with the frontend and CodeMirror
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Fix tests
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Review comments
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* Fix module id/source range stuff
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* More test fixups
Signed-off-by: Nick Cameron <nrc@ncameron.org>
---------
Signed-off-by: Nick Cameron <nrc@ncameron.org>
* WIP: experimenting with Loft UI
Relates to #4470
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Add selection guard
* Working loft for two sketches in the right hardcoded order
* First pass at handling more than 2 sketches
* WIP selections
* WIP selections
* More checks
* Appends the loft line after the 'last' sketch in the code
* Clean up
* Enable multiple selections after the button click
* First point-click loft test (not working locally, loft gets inserted at the wrong place)
* Lint
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* Clean up and working pw test
* Add test for doesSceneHaveSweepableSketch with count = 2
* Clean up loftSketches function
* Add pw test for preselected sketches
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Move to fromPromise-based Actor
* Move error logic out of loftSketches, fix pw tests
* Remove comments
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Fix typo
* Revert snapshots
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger CI
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* refactor code mod and tests
* tsc
* make lint happy
* remove dumby data
Co-authored-by: Kurt Hutten <k.hutten@protonmail.ch>
---------
Co-authored-by: Kurt Hutten <k.hutten@protonmail.ch>
* Add a code mod for offset plane
* Add support for default plane selections to our `otherSelections` object
* Make availableVars work without a selection range
(because default planes don't have one)
* Make default planes selectable in cmdbar even if AST is empty
* Add offset plane command and activate in toolbar
* Avoid unnecessary error when sketching on offset plane by returning early
* Add supporting test features for offset plane E2E test
* Add WIP E2E test for offset plane
Struggling to get local electron test suite running properly
* Typos
* Lints
* Fix test by making it a web-based one:
I couldn't use the cmdBar fixture with an electron test for some reason.
* Update src/lib/commandBarConfigs/modelingCommandConfig.ts
* Update src/machines/modelingMachine.ts
* Revert changes to `homePageFixture`, as they were unused
* @Irev-Dev feedback: convert action to actor, fix machine layout
* Update plane icon to be not dashed, follow conventions closer
* fix selection bugs found by QA-wolf
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* trigger ci
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* selection stuff
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest)
* trigger CI
* fix bugs
* some edge cut stuff
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* trigger CI
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* fix sketch mode issues
* fix more tests, selection in sketch related
* more test fixing
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger ci
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Trigger ci
* more sketch mode selection fixes
* fix unit tests
* rename function
* remove .only
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* lint
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* fix bad pathToNode issue
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* fix sketch on face
* migrate a more selections types
* migrate a more selections types
* fix code selection of fillets
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* migrate a more selections types
* fix bad path to node, looks like a race
* migrate a more selections types
* migrate a more selections types
* fix cmd bar selections
* fix cmd bar selections
* fix display issues
* migrate a more selections types
* Revert "migrate a more selections types"
This reverts commit 0d0e453bbb.
* migrate a more selections types
* clean up1
* clean up 2
* fix types after main merge
* review tweaks
* fix wall selection bug
* Update src/lang/std/engineConnection.ts
Co-authored-by: Jonathan Tran <jonnytran@gmail.com>
* add franks TODO comment
* fix type after main merge, plus a touch of clean up
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
Co-authored-by: Jonathan Tran <jonnytran@gmail.com>
* Update offset_plane to actually create and show the plane in-engine
* Fix broken ability to use offsetPlanes in startSketchOn
* Make the newly-visible offset planes usable for sketching via UI
* Add a playwright test for sketching on an offset plane via point-and-click
* cargo clippy & cargo fmt
* Make `PlaneData` the first item of `SketchData` so autocomplete continues to work well for `startSketchOn`
* @nadr0 feedback re: `offsetIndex`
* From @jtran: "Need to call the ID generator so that IDs are stable."
* More feedback from @jtran and fix incomplete use of `id_generator` in last commit
* Oops I missed saving `isPathToNodeNumber` earlier 🤦🏻
* Make the distinction between `Plane` and `PlaneOrientationData` more clear per @nadr0 and @lf94's feedback
* Make `newPathToNode` less hardcoded, per @lf94's feedback
* Don't need to unbox and rebox `plane`
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Rearranging of enums and structs, but the offsetPlanes are still not used by their sketches
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest-8-cores)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest-8-cores)
* Revert all my little newtype fiddling it's a waste of time.
* Update docs
* cargo fmt
* Remove log
* Print the unexpected diagnostics
* Undo renaming of `PlaneData`
* Remove generated PlaneRientationData docs page
* Redo doc generation after undoing `PlaneData` rename
* Impl FromKclValue for the new plane datatypes
* Clippy lint
* When starting a sketch, only hide the plane if it's a custom plane
* Fix FromKclValue and macro use since merge
* Fix to not convert Plane to PlaneData
* Make sure offset planes are `Custom` type
* SketchData actually doesn't need to be in a certain order
This avoids the autocompletion issue I was having.
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
Co-authored-by: Adam Chalmers <adam.chalmers@zoo.dev>
Co-authored-by: Jonathan Tran <jonnytran@gmail.com>
* fix: big commit, doing this to save work then do a PR cleanup; center rectangle
* fix: making a center function for each scenario
* fix: reverting the update rectangle code since I have a center rectangle one
* fix: does not allow seletcing circle or rectangle tool while selecting a face
* chore: adding comment to better read the HTML
* fix: cleaning up for PR
* fix: pushing broken code for someone to checkout
* fix: fixed the typescript issues, removed the as keyword for my center rectangle expressions
* fix: removing comment
* fix: removed as for type narrowing checks
* Reapply "Deflake project settings override on desktop (#4370)" (#4450)
This reverts commit b11040c23c.
* Refactor writeToFile and updateCodeEditor to happen at appropriate times
* Turn error into warning about out of date AST.
* Rename setUp to setup
* ONLY reload current file on changes.
* If value is falsey then don't try to executeAst
* Fix up code based selections after constraints
* Correct any last missing code mods
* Update src/clientSideScene/ClientSideSceneComp.tsx
Remove eslint rule no-floating-promises
Co-authored-by: Jonathan Tran <jonnytran@gmail.com>
* Fixups
* Fix FileTree failing
---------
Co-authored-by: Jonathan Tran <jonnytran@gmail.com>
* Add ID generator to ExecState
* Change default plane IDs to be hardcoded
* Fix lint warning
* Add exposing ID generator as output of executor
* Change to use generated definition of ExecState in TS
* Fix IdGenerator to use camel case in TS
* Fix TS type errors
* Add exposing id_generator parameter
* Add using the previously generated ID generator
* wip: Add display of feature tree in debug pane
* Remove artifact graph augmentation
* Change default planes to use id generator instead of hardcoded UUIDs
* Fix to reuse previously generated IDs
* Add e2e test
* Change feature tree to be collapsed by default
* Remove debug prints
* Fix unit test to use execState
* Fix type to be more general
* Remove outdated comment
* Update derive-docs output
* Fix object display component to be more general
* Remove unused ArtifactId type
* Fix test to be less brittle
* Remove codeRef and pathToNode from display
* Fix to remove test.only
Co-authored-by: Frank Noirot <frank@zoo.dev>
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest)
* Move plane conversion code to be next to type
* Revert "A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest)"
This reverts commit 3455cc951b.
* Rename file
* Rename components and add doc comments
* Revive the collapse button
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest)
* Confirm
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest)
* Confirm
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest)
* Confirm
---------
Co-authored-by: Frank Noirot <frank@zoo.dev>
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
* tentatively adding this
* Update src/components/ModelingMachineProvider.tsx
Co-authored-by: Jonathan Tran <jonnytran@gmail.com>
* Show shortcut in UI dialog
* Move command into modelingMachine action
* Add a menu item to the view menu
* Switch gizmo tests to use "deprecated" test setup in prep for new fixture-based test
* Add e2e test for center view to selection
* Bump @kittycad/lib to latest and fix tsc
* Bump @kittycad/lib to v2.0.7 to fix electron building
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest)
---------
Co-authored-by: Jonathan Tran <jonnytran@gmail.com>
Co-authored-by: Frank Noirot <frank@kittycad.io>
Co-authored-by: 49fl <ircsurfer33@gmail.com>
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
Co-authored-by: Frank Noirot <frank@zoo.dev>
* sketch on chamfer start
* working
* step app from getting in weird state when selection face to sketch on
* sketch on chamfer tests
* clean up
* fix test
* fix click selections for chamfers, add tests
* fixture setup (#3964)
* initial break up
* rename main fixture file
* add more expect state pattern
* add fixture comment
* add comments to chamfer function
* typos
* works without pipeExpr
* circle
* fix another example
* fix bad comment
* toPoint fix
* cargo fmt
* resolve most of the tests
* fix last test
* missed circle in bracket
* remove console error
* fmt
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest)
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest)
* trigger ci
* remove three dot menu for circle
* make sure circle can be extruded
* fix up after merge
* add extrude test for circle
* clean up
* typo
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest)
* Revert "A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest)"
This reverts commit 03f8eeb542.
* update docs again
* cmd bar test serialisation improvements
* tiny clean up
* fix after: Replace kittycad crate with kittycad-modeling-cmds
* fmt
* rename fix
* Update src/lib/toolbar.ts
Co-authored-by: Frank Noirot <frank@zoo.dev>
* add another error to list
* A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest)
* image updates
* Revert "A snapshot a day keeps the bugs away! 📷🐛 (OS: ubuntu-latest)"
This reverts commit 505bb20bea.
* update markdown
* skip un reproducable windows test failure
* rust review
* leave issue todo comment
---------
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
Co-authored-by: Frank Noirot <frank@zoo.dev>
* chore: Implemented a executeAst interrupt to stop processing a KCL program
* fix: added a catch since this promise was not being caught
* fix: fmt formatting, need to fix some tsc errors next.
* fix: fixing tsc errors
* fix: cleaning up comment
* fix: only rejecting pending modeling commands
* fix: adding constant for rejection message, adding rejection in WASM send command
* fix: tsc, lint, fmt checks
* feat: first pass over revolve with basic hard coded X axis
* fix: updated revolve status for DEV only
* fix: adding some TODOs to warn others about the Revolve MVP
* fix: fmt, lint, tsc checks
* fix: codespell got me
* fix: xstate v5 upgrade
* fix: removing this fix for a different PR. Not needed for initial MVP
* fix: renaming extrude function to sweep since it fixes extrude and revolve now
* fix: updating selection logic to support revolve
* fix: renaming extrude to sweep since it adds revolve
* fix: swapping as for type in function parameters
* fix: updated from object destruct to structuredClone
* fix: addressing PR comments
* fix: one other typo for return value of revolve
* test
* test + selection loop
* wipe as
* multi body multi fillet test
* make eslint happy again
* as fatality
* Revert "make eslint happy again"
This reverts commit 21a966b9b0.
* lint error fix
* Add lints for floating and misued promises
* Add logging async errors in main
* Add async error catch in test-utils
* Change any to unknown
* Trap promise errors and ignore more await warnings
* Add more ignores and toSync helper
* Fix more lint warnings
* Add more ignores and fixes
* Add more reject reporting
* Add accepting arbitrary parameters to toSync()
* Fix more lints
* Revert unintentional change to non-arrow function
* Revert unintentional change to use arrow function
* Fix new warnings in main with auto updater
* Fix formatting
* Change lints to error
This is what the recommended type checked rules do.
* Fix to properly report promise rejections
* Fix formatting
* Fix formatting
* Remove unused import
* Remove unused convenience function
* Move type helpers
* Fix to not return promise when caller doesn't expect it
* Add ignores to lsp code
* migrate settingsMachine
* Guard events with properties instead
* migrate settingsMachine
* Migrate auth machine
* Migrate file machine
* Migrate depracated types
* Migrate home machine
* Migrate command bar machine
* Version fixes
* Migrate command bar machine
* Migrate modeling machine
* Migrate types, state.can, state.matches and state.nextEvents
* Fix syntax
* Pass in modelingState into editor manager instead of modeling event
* Fix issue with missing command bar provider
* Fix state transition
* Fix type issue in Home
* Make sure no guards rely on event type
* Fix up command bar submission logic
* Home machine tweaks to get things running
* Fix AST fillet function args
* Handle "Set selection" when it is called by actor onDone
* Remove unused imports
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest)
* Fix injectin project to the fileTree machine
* Revert "A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest)"
This reverts commit 4b43ff69d1.
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest)
* Re-run CI
* Restore success toasts on file/folder deletion
* Replace casting with guarding against event.type
* Remove console.log
Co-authored-by: Jonathan Tran <jonnytran@gmail.com>
* Replace all instances of event casting with guards against event.type
---------
Co-authored-by: Frank Noirot <frank@kittycad.io>
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
Co-authored-by: Kurt Hutten Irev-Dev <k.hutten@protonmail.ch>
Co-authored-by: Jonathan Tran <jonnytran@gmail.com>
Co-authored-by: Frank Noirot <frank@zoo.dev>
* addFillet.ts - refactor existing code
* move logic from modelingMachine to addFillet
* rename getPathForSelection into getPathToExtrudeForSegmentSelection
* stuck with kclManager
* stuck 2
* remove engineless exe from fillet test
* pathToExtrudeNode properly tested
* resolve conflicts
* engine initialization update
* cleanup comments
* passed ExecuteArgs instead of Program to executeAst
* afterAll engineCommandManager.tearDown
* resolve conflicts
* mutateAstForRadiusInsertion
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest)
* save banner from hulk mutations
* A snapshot a day keeps the bugs away! 📷🐛 (OS: windows-latest)
* sweet errors
* purging the as
* make type of getNodeFromPath safe again
* as cleaning part 2
* cleared mutation logic
* last bits
* make the linter happy
---------
Co-authored-by: Kurt Hutten Irev-Dev <k.hutten@protonmail.ch>
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
We can store Rust types like `SketchGroup` as their own variant of `KclValue`, or as `KclValue::UserVal`. Sometimes we store in one and try to read from the other, which fails. This causes bugs, like #3338.
Instead, we should use either ::SketchGroup or ::UserVal, and stop using the other. If we stopped using ::UserVal, we'd need a new variant for every Rust type we wanted to build, including user-defined types. So I don't think that's practical.
Instead, we should store every KCL value by de/serializing it into UserVal. This is a first step along that path, removing just the SketchGroup variants. If it goes well, we can remove the other specialized variants too.
My only concern is there might be performance implications from how frequently we convert between serde_json::Value and Rust types via Serde. But I'm not too worried -- there's no parsing JSON strings, just traversing serde_json::Value trees. This isn't great for performance but I think it'll probably be miniscule in comparison to doing all the API calls.
