Replace lower-right controls with a full status bar (#7443)

* Resurrect this branch with an initial commit

* Add telemetry to global default items

* Add credit progress bar to status bar

* Add selection info to status bar

* Add help menu to "local" side

* Rename statusBarItem utils

* Delete LowerRightControls, now unused

* fix lints

* Update snapshots

* Add test-id to network health indicator, which all E2E tests rely on

* Update src/components/StatusBar/StatusBar.tsx

Co-authored-by: graphite-app[bot] <96075541+graphite-app[bot]@users.noreply.github.com>

* Fix a couple little issues with the e2e tests

* Fix gizmo e2e tests (it moved) and network health test (it should not be on home page)

* More tweaks to accomodate changes to network health indicator

We made use of two test ID's to make Playwright aware of the state, one
of which was on the icon. Now that we want to normalize usage of the
status bar along a more limited API, that became a not possible. This
just tweaks some test code that relied on that fact.

* Fix lints

* Update snapshots

* Re-run CI

* Update snapshots

* Update snapshots

* Test fixes, label logic tweaks

* Update snapshots

* Update snapshots

* Fix up last few tests hopefully. Relative path syntax failed on windows

* Relative paths are behaving badly on Windows, use the old code here

* Update snapshots

* Update snapshots

* Tweak y-value to work on all platforms, ubuntu didn't like 438

* Fix tooltip and popover alignment on NetworkMachineIndicator

* Remove dire warning comment

* Update src/components/StatusBar/defaultStatusBarItems.tsx

Co-authored-by: graphite-app[bot] <96075541+graphite-app[bot]@users.noreply.github.com>

* @lee-at-zoo-corp feedback, pull hooks out of UI code

* Re-run CI

---------

Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
Co-authored-by: graphite-app[bot] <96075541+graphite-app[bot]@users.noreply.github.com>

.github/CODEOWNERS

@@ -0,0 +1,3 @@
+* @KittyCAD/frontend
+/src/ @KittyCAD/frontend
+/rust/ @KittyCAD/kcl

.github/workflows/cargo-fmt.yml

@@ -31,15 +31,15 @@ jobs:
       - name: Use correct Rust toolchain
         shell: bash
         run: |
-          [ -e rust-toolchain.toml ] || cp rust/rust-toolchain.toml ./
+          cp .github/workflows/nightly-rust-toolchain.toml rust-toolchain.toml
       - name: Install rust
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
           cache-workspaces: rust
           components: rustfmt
 
-      - name: Run cargo fmt
+      - name: Run nightly cargo fmt
         run: |
           cd rust
-          cargo fmt -- --check
+          cargo +nightly fmt -- --check
         shell: bash

.github/workflows/e2e-tests.yml

@@ -95,7 +95,8 @@ jobs:
         shell: bash
         run: npm run build:wasm
 
-      - uses: actions/upload-artifact@v4
+      - name: Upload compiled wasm artifacts
+        uses: actions/upload-artifact@v4
         with:
           name: prepared-wasm
           path: |
@@ -176,7 +177,8 @@ jobs:
           CI_SUITE: e2e:snapshots
           TARGET: web
 
-      - uses: actions/upload-artifact@v4
+      - name: Upload playwright report
+        uses: actions/upload-artifact@v4
         if: ${{ !cancelled() }}
         with:
           name: playwright-report-snapshot-${{ github.sha }}
@@ -290,7 +292,8 @@ jobs:
           CI_SUITE: e2e:web
           TARGET: web
 
-      - uses: actions/upload-artifact@v4
+      - name: Upload playwright report
+        uses: actions/upload-artifact@v4
         if: ${{ !cancelled() && (success() || failure()) }}
         with:
           name: playwright-report-web-${{ env.OS_NAME }}-${{ matrix.shardIndex }}-${{ github.sha }}
@@ -415,7 +418,8 @@ jobs:
           CI_SUITE: e2e:desktop
           TARGET: desktop
 
-      - uses: actions/upload-artifact@v4
+      - name: Upload test report
+        uses: actions/upload-artifact@v4
         if: always()
         with:
           name: test-results-desktop-${{ env.OS_NAME }}-${{ matrix.shardIndex }}-${{ github.sha }}
@@ -424,7 +428,8 @@ jobs:
           retention-days: 30
           overwrite: true
 
-      - uses: actions/upload-artifact@v4
+      - name: Upload playwright report
+        uses: actions/upload-artifact@v4
         if: always()
         with:
           name: playwright-report-desktop-${{ env.OS_NAME }}-${{ matrix.shardIndex }}-${{ github.sha }}

.github/workflows/nightly-rust-toolchain.toml

@@ -0,0 +1,3 @@
+[toolchain]
+channel = "nightly"
+components = ["rustfmt"]

docs/kcl-lang/types.md

@@ -44,7 +44,7 @@ detail on importing geometry.
 
 Tags are used to give a name (tag) to a specific path.
 
-### `TagDeclarator`
+### Tag declarations - `TagDecl`
 
 The syntax for declaring a tag is `$myTag` you would use it in the following
 way:
@@ -67,24 +67,28 @@ startSketchOn(XZ)
   |> close()
 ```
 
-### `TagIdentifier`
+When a function requires declaring a new tag (using the `$` syntax), the argument has type [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl).
 
-As per the example above you can use the tag identifier to get a reference to the 
+### Tag identifiers
-tagged object. The syntax for this is `myTag`.
 
-In the example above we use the tag identifier to get the angle of the segment
+A tag created using a tag declarator can be used by writing its name without the `$`, e.g., `myTag`.
-`segAng(rectangleSegmentA001)`.
+Where necessary to disambiguate from tag declarations, we call these tag identifiers.
 
-### `Start`
+In the example above we use the tag identifier `rectangleSegmentA001` to get the angle of the segment
+using `segAng(rectangleSegmentA001)`.
 
-There is a special tag, `START` (with type `Start`, although under the cover, it's a string)
+Tags can identify either an edge or face of a solid, or a line or other edge of a sketch. Functions
-for identifying the face of a solid which was the start of an extrusion (i.e., the surface which
+which take a tag identifier as an argument will use either [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge) (for the edge of a
-is extruded).
+solid or sketch) or [`TaggedFace`](/docs/kcl-std/types/std-types-TaggedFace).
 
-### `End`
+If a line in a sketch is tagged and then the sketch is extruded, the tag is a `TaggedEdge` before
+extrusion and a `TaggedFace` after extrusion.
+
+#### `START` and `END`
+
+[`START`](/docs/kcl-std/consts/std-START) and [`END`](/docs/kcl-std/consts/std-END) are special tags
+for identifying the starting and ending faces of an extruded solid.
 
-There is a special tag, `END` (with type `End`, although under the cover, it's a string)
-for identifying the face of a solid which was finishes an extrusion.
 
 ### Tag Scope
 

docs/kcl-std/consts/std-END.md

@@ -8,9 +8,13 @@ layout: manual
 Identifies the ending face of an extrusion. I.e., the new face created by an extrusion.
 
 ```kcl
-END: string = 'end'
+END: TaggedFace
 ```
 
 
 
+### Type
+
+[`TaggedFace`](/docs/kcl-std/types/std-types-TaggedFace) - A tag which references a face of a solid, including the distinguished tags `START` and `END`.
+
 

docs/kcl-std/consts/std-START.md

@@ -8,9 +8,13 @@ layout: manual
 Identifies the starting face of an extrusion. I.e., the face which is extruded.
 
 ```kcl
-START: string = 'start'
+START: TaggedFace
 ```
 
 
 
+### Type
+
+[`TaggedFace`](/docs/kcl-std/types/std-types-TaggedFace) - A tag which references a face of a solid, including the distinguished tags `START` and `END`.
+
 

docs/kcl-std/consts/std-X.md

@@ -8,9 +8,13 @@ layout: manual
 The X-axis (can be used in both 2d and 3d contexts).
 
 ```kcl
-X
+X: Axis3d
 ```
 
 
 
+### Type
+
+[`Axis3d`](/docs/kcl-std/types/std-types-Axis3d) - An abstract and infinite line in 3d space.
+
 

docs/kcl-std/consts/std-XY.md

@@ -8,9 +8,13 @@ layout: manual
 An abstract 3d plane aligned with the X and Y axes. Its normal is the positive Z axis.
 
 ```kcl
-XY
+XY: Plane
 ```
 
 
 
+### Type
+
+[`Plane`](/docs/kcl-std/types/std-types-Plane) - An abstract plane.
+
 

docs/kcl-std/consts/std-XZ.md

@@ -8,9 +8,13 @@ layout: manual
 An abstract 3d plane aligned with the X and Z axes. Its normal is the negative Y axis.
 
 ```kcl
-XZ
+XZ: Plane
 ```
 
 
 
+### Type
+
+[`Plane`](/docs/kcl-std/types/std-types-Plane) - An abstract plane.
+
 

docs/kcl-std/consts/std-Y.md

@@ -8,9 +8,13 @@ layout: manual
 The Y-axis (can be used in both 2d and 3d contexts).
 
 ```kcl
-Y
+Y: Axis3d
 ```
 
 
 
+### Type
+
+[`Axis3d`](/docs/kcl-std/types/std-types-Axis3d) - An abstract and infinite line in 3d space.
+
 

docs/kcl-std/consts/std-YZ.md

@@ -8,9 +8,13 @@ layout: manual
 An abstract 3d plane aligned with the Y and Z axes. Its normal is the positive X axis.
 
 ```kcl
-YZ
+YZ: Plane
 ```
 
 
 
+### Type
+
+[`Plane`](/docs/kcl-std/types/std-types-Plane) - An abstract plane.
+
 

docs/kcl-std/consts/std-Z.md

@@ -8,9 +8,13 @@ layout: manual
 The 3D Z-axis.
 
 ```kcl
-Z
+Z: Axis3d
 ```
 
 
 
+### Type
+
+[`Axis3d`](/docs/kcl-std/types/std-types-Axis3d) - An abstract and infinite line in 3d space.
+
 

docs/kcl-std/consts/std-math-E.md

@@ -13,6 +13,10 @@ E: number = 2.71828182845904523536028747135266250_
 
 
 
+### Type
+
+[`number`](/docs/kcl-std/types/std-types-number) - A number.
+
 ### Examples
 
 ```kcl

docs/kcl-std/consts/std-math-PI.md

@@ -11,7 +11,7 @@ The value of `pi`, Archimedes’ constant (π).
 PI: number(_?) = 3.14159265358979323846264338327950288_?
 ```
 
-`PI` is a number and is technically a ratio, so you might expect it to have type `number(_)`.
+`PI` is a number and is technically a ratio, so you might expect it to have type [`number(_)`](/docs/kcl-std/types/std-types-number).
 However, `PI` is nearly always used for converting between different units - usually degrees to or
 from radians. Therefore, `PI` is treated a bit specially by KCL and always has unknown units. This
 means that if you use `PI`, you will need to give KCL some extra information about the units of numbers.
@@ -19,6 +19,10 @@ Usually you should use type ascription on the result of calculations, e.g., `(2
 It is better to use `units::toRadians` or `units::toDegrees` to convert between angles with
 different units where possible.
 
+### Type
+
+[`number(_?)`](/docs/kcl-std/types/std-types-number) - A number.
+
 ### Examples
 
 ```kcl

docs/kcl-std/consts/std-math-TAU.md

@@ -13,6 +13,10 @@ TAU: number = 6.28318530717958647692528676655900577_
 
 
 
+### Type
+
+[`number`](/docs/kcl-std/types/std-types-number) - A number.
+
 ### Examples
 
 ```kcl

docs/kcl-std/consts/std-sweep-SKETCH_PLANE.md

@@ -13,4 +13,8 @@ sweep::SKETCH_PLANE: string = 'sketchPlane'
 
 
 
+### Type
+
+[`string`](/docs/kcl-std/types/std-types-string) - A sequence of characters
+
 

docs/kcl-std/consts/std-sweep-TRAJECTORY.md

@@ -13,4 +13,8 @@ sweep::TRAJECTORY: string = 'trajectoryCurve'
 
 
 
+### Type
+
+[`string`](/docs/kcl-std/types/std-types-string) - A sequence of characters
+
 

docs/kcl-std/consts/std-turns-HALF_TURN.md

@@ -13,4 +13,8 @@ turns::HALF_TURN: number(deg) = 180deg
 
 
 
+### Type
+
+[`number(deg)`](/docs/kcl-std/types/std-types-number) - A number.
+
 

docs/kcl-std/consts/std-turns-QUARTER_TURN.md

@@ -13,4 +13,8 @@ turns::QUARTER_TURN: number(deg) = 90deg
 
 
 
+### Type
+
+[`number(deg)`](/docs/kcl-std/types/std-types-number) - A number.
+
 

docs/kcl-std/consts/std-turns-THREE_QUARTER_TURN.md

@@ -13,4 +13,8 @@ turns::THREE_QUARTER_TURN: number(deg) = 270deg
 
 
 
+### Type
+
+[`number(deg)`](/docs/kcl-std/types/std-types-number) - A number.
+
 

docs/kcl-std/consts/std-turns-ZERO.md

@@ -8,9 +8,13 @@ layout: manual
 No turn, zero degrees/radians.
 
 ```kcl
-turns::ZERO
+turns::ZERO: number(Angle)
 ```
 
 
 
+### Type
+
+[`number(Angle)`](/docs/kcl-std/types/std-types-number) - A number.
+
 

docs/kcl-std/functions/std-sketch-angledLine.md

@@ -16,7 +16,7 @@ angledLine(
   lengthY?: number(Length),
   endAbsoluteX?: number(Length),
   endAbsoluteY?: number(Length),
-  tag?: tag,
+  tag?: TagDecl,
 ): Sketch
 ```
 
@@ -33,7 +33,7 @@ angledLine(
 | `lengthY` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Draw the line this distance along the Y axis. Only one of `length`, `lengthX`, `lengthY`, `endAbsoluteX`, `endAbsoluteY` can be given. | No |
 | `endAbsoluteX` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Draw the line along the given angle until it reaches this point along the X axis. Only one of `length`, `lengthX`, `lengthY`, `endAbsoluteX`, `endAbsoluteY` can be given. | No |
 | `endAbsoluteY` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Draw the line along the given angle until it reaches this point along the Y axis. Only one of `length`, `lengthX`, `lengthY`, `endAbsoluteX`, `endAbsoluteY` can be given. | No |
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Create a new tag which refers to this line. | No |
+| `tag` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | Create a new tag which refers to this line. | No |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-angledLineThatIntersects.md

@@ -11,9 +11,9 @@ Draw an angled line from the current origin, constructing a line segment such th
 angledLineThatIntersects(
   @sketch: Sketch,
   angle: number(Angle),
-  intersectTag: tag,
+  intersectTag: TaggedEdge,
   offset?: number(Length),
-  tag?: tag,
+  tag?: TagDecl,
 ): Sketch
 ```
 
@@ -25,9 +25,9 @@ angledLineThatIntersects(
 |----------|------|-------------|----------|
 | `sketch` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) | Which sketch should this path be added to? | Yes |
 | `angle` | [`number(Angle)`](/docs/kcl-std/types/std-types-number) | Which angle should the line be drawn at? | Yes |
-| `intersectTag` | [`tag`](/docs/kcl-std/types/std-types-tag) | The tag of the line to intersect with. | Yes |
+| `intersectTag` | [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge) | The tag of the line to intersect with. | Yes |
 | `offset` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The offset from the intersecting line. | No |
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Create a new tag which refers to this line. | No |
+| `tag` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | Create a new tag which refers to this line. | No |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-arc.md

@@ -16,7 +16,7 @@ arc(
   diameter?: number(Length),
   interiorAbsolute?: Point2d,
   endAbsolute?: Point2d,
-  tag?: tag,
+  tag?: TagDecl,
 ): Sketch
 ```
 
@@ -40,7 +40,7 @@ for to construct your shape, you're likely looking for tangentialArc.
 | `diameter` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | How large should the circle be? Incompatible with `radius`. | No |
 | `interiorAbsolute` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | Any point between the arc's start and end? Requires `endAbsolute`. Incompatible with `angleStart` or `angleEnd`. | No |
 | `endAbsolute` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | Where should this arc end? Requires `interiorAbsolute`. Incompatible with `angleStart` or `angleEnd`. | No |
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Create a new tag which refers to this arc. | No |
+| `tag` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | Create a new tag which refers to this arc. | No |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-bezierCurve.md

@@ -16,7 +16,7 @@ bezierCurve(
   control1Absolute?: Point2d,
   control2Absolute?: Point2d,
   endAbsolute?: Point2d,
-  tag?: tag,
+  tag?: TagDecl,
 ): Sketch
 ```
 
@@ -33,7 +33,7 @@ bezierCurve(
 | `control1Absolute` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | First control point for the cubic. Absolute point. | No |
 | `control2Absolute` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | Second control point for the cubic. Absolute point. | No |
 | `endAbsolute` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | Coordinate on the plane at which this line should end. | No |
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Create a new tag which refers to this line. | No |
+| `tag` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | Create a new tag which refers to this line. | No |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-circle.md

@@ -13,7 +13,7 @@ circle(
   center: Point2d,
   radius?: number(Length),
   diameter?: number(Length),
-  tag?: tag,
+  tag?: TagDecl,
 ): Sketch
 ```
 
@@ -27,7 +27,7 @@ circle(
 | `center` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | The center of the circle. | Yes |
 | `radius` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The radius of the circle. Incompatible with `diameter`. | No |
 | `diameter` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The diameter of the circle. Incompatible with `radius`. | No |
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Create a new tag which refers to this circle. | No |
+| `tag` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | Create a new tag which refers to this circle. | No |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-circleThreePoint.md

@@ -13,7 +13,7 @@ circleThreePoint(
   p1: Point2d,
   p2: Point2d,
   p3: Point2d,
-  tag?: tag,
+  tag?: TagDecl,
 ): Sketch
 ```
 
@@ -27,7 +27,7 @@ circleThreePoint(
 | `p1` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | 1st point to derive the circle. | Yes |
 | `p2` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | 2nd point to derive the circle. | Yes |
 | `p3` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | 3rd point to derive the circle. | Yes |
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Identifier for the circle to reference elsewhere. | No |
+| `tag` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | Identifier for the circle to reference elsewhere. | No |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-close.md

@@ -10,7 +10,7 @@ Construct a line segment from the current origin back to the profile's origin, e
 ```kcl
 close(
   @sketch: Sketch,
-  tag?: tag,
+  tag?: TagDecl,
 ): Sketch
 ```
 
@@ -24,7 +24,7 @@ starting point.
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `sketch` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) | The sketch you want to close. | Yes |
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Create a new tag which refers to this line. | No |
+| `tag` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | Create a new tag which refers to this line. | No |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-getCommonEdge.md

@@ -8,7 +8,7 @@ layout: manual
 Get the shared edge between two faces.
 
 ```kcl
-getCommonEdge(faces: [tag; 2]): Edge
+getCommonEdge(faces: [TaggedFace; 2]): Edge
 ```
 
 
@@ -17,7 +17,7 @@ getCommonEdge(faces: [tag; 2]): Edge
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `faces` | `[tag; 2]` | The tags of the faces you want to find the common edge between. | Yes |
+| `faces` | `[TaggedFace; 2]` | The tags of the faces you want to find the common edge between. | Yes |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-getNextAdjacentEdge.md

@@ -8,7 +8,7 @@ layout: manual
 Get the next adjacent edge to the edge given.
 
 ```kcl
-getNextAdjacentEdge(@edge: tag): Edge
+getNextAdjacentEdge(@edge: TaggedEdge): Edge
 ```
 
 
@@ -17,7 +17,7 @@ getNextAdjacentEdge(@edge: tag): Edge
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `edge` | [`tag`](/docs/kcl-std/types/std-types-tag) | The tag of the edge you want to find the next adjacent edge of. | Yes |
+| `edge` | [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge) | The tag of the edge you want to find the next adjacent edge of. | Yes |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-getOppositeEdge.md

@@ -8,7 +8,7 @@ layout: manual
 Get the opposite edge to the edge given.
 
 ```kcl
-getOppositeEdge(@edge: tag): Edge
+getOppositeEdge(@edge: TaggedEdge): Edge
 ```
 
 
@@ -17,7 +17,7 @@ getOppositeEdge(@edge: tag): Edge
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `edge` | [`tag`](/docs/kcl-std/types/std-types-tag) | The tag of the edge you want to find the opposite edge of. | Yes |
+| `edge` | [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge) | The tag of the edge you want to find the opposite edge of. | Yes |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-getPreviousAdjacentEdge.md

@@ -8,7 +8,7 @@ layout: manual
 Get the previous adjacent edge to the edge given.
 
 ```kcl
-getPreviousAdjacentEdge(@edge: tag): Edge
+getPreviousAdjacentEdge(@edge: TaggedEdge): Edge
 ```
 
 
@@ -17,7 +17,7 @@ getPreviousAdjacentEdge(@edge: tag): Edge
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `edge` | [`tag`](/docs/kcl-std/types/std-types-tag) | The tag of the edge you want to find the previous adjacent edge of. | Yes |
+| `edge` | [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge) | The tag of the edge you want to find the previous adjacent edge of. | Yes |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-involuteCircular.md

@@ -14,7 +14,7 @@ involuteCircular(
   endRadius: number(Length),
   angle: number(Angle),
   reverse?: bool,
-  tag?: tag,
+  tag?: TagDecl,
 ): Sketch
 ```
 
@@ -29,7 +29,7 @@ involuteCircular(
 | `endRadius` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The involute is described between two circles, end_radius is the radius of the outer circle. | Yes |
 | `angle` | [`number(Angle)`](/docs/kcl-std/types/std-types-number) | The angle to rotate the involute by. A value of zero will produce a curve with a tangent along the x-axis at the start point of the curve. | Yes |
 | `reverse` | [`bool`](/docs/kcl-std/types/std-types-bool) | If reverse is true, the segment will start from the end of the involute, otherwise it will start from that start. | No |
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Create a new tag which refers to this line. | No |
+| `tag` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | Create a new tag which refers to this line. | No |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-line.md

@@ -12,7 +12,7 @@ line(
   @sketch: Sketch,
   endAbsolute?: Point2d,
   end?: Point2d,
-  tag?: tag,
+  tag?: TagDecl,
 ): Sketch
 ```
 
@@ -25,7 +25,7 @@ line(
 | `sketch` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) | Which sketch should this path be added to? | Yes |
 | `endAbsolute` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | Which absolute point should this line go to? Incompatible with `end`. | No |
 | `end` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | How far away (along the X and Y axes) should this line go? Incompatible with `endAbsolute`. | No |
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Create a new tag which refers to this line. | No |
+| `tag` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | Create a new tag which refers to this line. | No |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-loft.md

@@ -14,8 +14,8 @@ loft(
   bezApproximateRational?: bool,
   baseCurveIndex?: number(_),
   tolerance?: number(Length),
-  tagStart?: tag,
+  tagStart?: TagDecl,
-  tagEnd?: tag,
+  tagEnd?: TagDecl,
 ): Solid
 ```
 
@@ -30,8 +30,8 @@ The sketches need to be closed and on different planes that are parallel.
 | `bezApproximateRational` | [`bool`](/docs/kcl-std/types/std-types-bool) | Attempt to approximate rational curves (such as arcs) using a bezier. This will remove banding around interpolations between arcs and non-arcs. It may produce errors in other scenarios. Over time, this field won't be necessary. | No |
 | `baseCurveIndex` | [`number(_)`](/docs/kcl-std/types/std-types-number) | This can be set to override the automatically determined topological base curve, which is usually the first section encountered. | No |
 | `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Tolerance for the loft operation. | No |
-| `tagStart` | [`tag`](/docs/kcl-std/types/std-types-tag) | A named tag for the face at the start of the loft, i.e. the original sketch. | No |
+| `tagStart` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | A named tag for the face at the start of the loft, i.e. the original sketch. | No |
-| `tagEnd` | [`tag`](/docs/kcl-std/types/std-types-tag) | A named tag for the face at the end of the loft. | No |
+| `tagEnd` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | A named tag for the face at the end of the loft. | No |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-revolve.md

@@ -15,8 +15,8 @@ revolve(
   tolerance?: number(Length),
   symmetric?: bool,
   bidirectionalAngle?: number(Angle),
-  tagStart?: tag,
+  tagStart?: TagDecl,
-  tagEnd?: tag,
+  tagEnd?: TagDecl,
 ): [Solid; 1+]
 ```
 
@@ -41,8 +41,8 @@ revolved around the same axis.
 | `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Tolerance for the revolve operation. | No |
 | `symmetric` | [`bool`](/docs/kcl-std/types/std-types-bool) | If true, the extrusion will happen symmetrically around the sketch. Otherwise, the extrusion will happen on only one side of the sketch. | No |
 | `bidirectionalAngle` | [`number(Angle)`](/docs/kcl-std/types/std-types-number) | If specified, will also revolve in the opposite direction to 'angle' to the specified angle. If 'symmetric' is true, this value is ignored. | No |
-| `tagStart` | [`tag`](/docs/kcl-std/types/std-types-tag) | A named tag for the face at the start of the revolve, i.e. the original sketch. | No |
+| `tagStart` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | A named tag for the face at the start of the revolve, i.e. the original sketch. | No |
-| `tagEnd` | [`tag`](/docs/kcl-std/types/std-types-tag) | A named tag for the face at the end of the revolve. | No |
+| `tagEnd` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | A named tag for the face at the end of the revolve. | No |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-segAng.md

@@ -8,7 +8,7 @@ layout: manual
 Compute the angle (in degrees) of the provided line segment.
 
 ```kcl
-segAng(@tag: tag): number(Angle)
+segAng(@tag: TaggedEdge): number(Angle)
 ```
 
 
@@ -17,7 +17,7 @@ segAng(@tag: tag): number(Angle)
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | The line segment being queried by its tag. | Yes |
+| `tag` | [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge) | The line segment being queried by its tag. | Yes |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-segEnd.md

@@ -8,7 +8,7 @@ layout: manual
 Compute the ending point of the provided line segment.
 
 ```kcl
-segEnd(@tag: tag): Point2d
+segEnd(@tag: TaggedEdge): Point2d
 ```
 
 
@@ -17,7 +17,7 @@ segEnd(@tag: tag): Point2d
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | The line segment being queried by its tag. | Yes |
+| `tag` | [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge) | The line segment being queried by its tag. | Yes |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-segEndX.md

@@ -8,7 +8,7 @@ layout: manual
 Compute the ending point of the provided line segment along the 'x' axis.
 
 ```kcl
-segEndX(@tag: tag): number(Length)
+segEndX(@tag: TaggedEdge): number(Length)
 ```
 
 
@@ -17,7 +17,7 @@ segEndX(@tag: tag): number(Length)
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | The line segment being queried by its tag. | Yes |
+| `tag` | [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge) | The line segment being queried by its tag. | Yes |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-segEndY.md

@@ -8,7 +8,7 @@ layout: manual
 Compute the ending point of the provided line segment along the 'y' axis.
 
 ```kcl
-segEndY(@tag: tag): number(Length)
+segEndY(@tag: TaggedEdge): number(Length)
 ```
 
 
@@ -17,7 +17,7 @@ segEndY(@tag: tag): number(Length)
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | The line segment being queried by its tag. | Yes |
+| `tag` | [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge) | The line segment being queried by its tag. | Yes |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-segLen.md

@@ -8,7 +8,7 @@ layout: manual
 Compute the length of the provided line segment.
 
 ```kcl
-segLen(@tag: tag): number(Length)
+segLen(@tag: TaggedEdge): number(Length)
 ```
 
 
@@ -17,7 +17,7 @@ segLen(@tag: tag): number(Length)
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | The line segment being queried by its tag. | Yes |
+| `tag` | [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge) | The line segment being queried by its tag. | Yes |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-segStart.md

@@ -8,7 +8,7 @@ layout: manual
 Compute the starting point of the provided line segment.
 
 ```kcl
-segStart(@tag: tag): Point2d
+segStart(@tag: TaggedEdge): Point2d
 ```
 
 
@@ -17,7 +17,7 @@ segStart(@tag: tag): Point2d
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | The line segment being queried by its tag. | Yes |
+| `tag` | [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge) | The line segment being queried by its tag. | Yes |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-segStartX.md

@@ -8,7 +8,7 @@ layout: manual
 Compute the starting point of the provided line segment along the 'x' axis.
 
 ```kcl
-segStartX(@tag: tag): number(Length)
+segStartX(@tag: TaggedEdge): number(Length)
 ```
 
 
@@ -17,7 +17,7 @@ segStartX(@tag: tag): number(Length)
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | The line segment being queried by its tag. | Yes |
+| `tag` | [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge) | The line segment being queried by its tag. | Yes |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-segStartY.md

@@ -8,7 +8,7 @@ layout: manual
 Compute the starting point of the provided line segment along the 'y' axis.
 
 ```kcl
-segStartY(@tag: tag): number(Length)
+segStartY(@tag: TaggedEdge): number(Length)
 ```
 
 
@@ -17,7 +17,7 @@ segStartY(@tag: tag): number(Length)
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | The line segment being queried by its tag. | Yes |
+| `tag` | [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge) | The line segment being queried by its tag. | Yes |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-startProfile.md

@@ -11,7 +11,7 @@ Start a new profile at a given point.
 startProfile(
   @startProfileOn: Plane | Face,
   at: Point2d,
-  tag?: tag,
+  tag?: TagDecl,
 ): Sketch
 ```
 
@@ -23,7 +23,7 @@ startProfile(
 |----------|------|-------------|----------|
 | `startProfileOn` | [`Plane`](/docs/kcl-std/types/std-types-Plane) or [`Face`](/docs/kcl-std/types/std-types-Face) | What to start the profile on. | Yes |
 | `at` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | Where to start the profile. An absolute point. | Yes |
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Tag this first starting point. | No |
+| `tag` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | Tag this first starting point. | No |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-startSketchOn.md

@@ -10,7 +10,7 @@ Start a new 2-dimensional sketch on a specific plane or face.
 ```kcl
 startSketchOn(
   @planeOrSolid: Solid | Plane,
-  face?: tag,
+  face?: TaggedFace,
 ): Plane | Face
 ```
 
@@ -36,7 +36,7 @@ face, since it will include all the parent faces and Solids.
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `planeOrSolid` | [`Solid`](/docs/kcl-std/types/std-types-Solid) or [`Plane`](/docs/kcl-std/types/std-types-Plane) | Profile whose start is being used. | Yes |
-| `face` | [`tag`](/docs/kcl-std/types/std-types-tag) | Identify a face of a solid if a solid is specified as the input argument (`planeOrSolid`). | No |
+| `face` | [`TaggedFace`](/docs/kcl-std/types/std-types-TaggedFace) | Identify a face of a solid if a solid is specified as the input argument (`planeOrSolid`). | No |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-sweep.md

@@ -14,8 +14,8 @@ sweep(
   sectional?: bool,
   tolerance?: number(Length),
   relativeTo?: string,
-  tagStart?: tag,
+  tagStart?: TagDecl,
-  tagEnd?: tag,
+  tagEnd?: TagDecl,
 ): [Solid; 1+]
 ```
 
@@ -37,8 +37,8 @@ swept along the same path.
 | `sectional` | [`bool`](/docs/kcl-std/types/std-types-bool) | If true, the sweep will be broken up into sub-sweeps (extrusions, revolves, sweeps) based on the trajectory path components. | No |
 | `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Tolerance for this operation. | No |
 | `relativeTo` | [`string`](/docs/kcl-std/types/std-types-string) | What is the sweep relative to? Can be either 'sketchPlane' or 'trajectoryCurve'. | No |
-| `tagStart` | [`tag`](/docs/kcl-std/types/std-types-tag) | A named tag for the face at the start of the sweep, i.e. the original sketch. | No |
+| `tagStart` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | A named tag for the face at the start of the sweep, i.e. the original sketch. | No |
-| `tagEnd` | [`tag`](/docs/kcl-std/types/std-types-tag) | A named tag for the face at the end of the sweep. | No |
+| `tagEnd` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | A named tag for the face at the end of the sweep. | No |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-tangentToEnd.md

@@ -8,7 +8,7 @@ layout: manual
 Returns the angle coming out of the end of the segment in degrees.
 
 ```kcl
-tangentToEnd(@tag: tag): number(Angle)
+tangentToEnd(@tag: TaggedEdge): number(Angle)
 ```
 
 
@@ -17,7 +17,7 @@ tangentToEnd(@tag: tag): number(Angle)
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | The line segment being queried by its tag. | Yes |
+| `tag` | [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge) | The line segment being queried by its tag. | Yes |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-tangentialArc.md

@@ -15,7 +15,7 @@ tangentialArc(
   radius?: number(Length),
   diameter?: number(Length),
   angle?: number(Angle),
-  tag?: tag,
+  tag?: TagDecl,
 ): Sketch
 ```
 
@@ -35,7 +35,7 @@ for 'angle' degrees along the imaginary circle.
 | `radius` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Radius of the imaginary circle. `angle` must be given. Incompatible with `end` and `endAbsolute` and `diameter`. | No |
 | `diameter` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Diameter of the imaginary circle. `angle` must be given. Incompatible with `end` and `endAbsolute` and `radius`. | No |
 | `angle` | [`number(Angle)`](/docs/kcl-std/types/std-types-number) | Offset of the arc. `radius` must be given. Incompatible with `end` and `endAbsolute`. | No |
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Create a new tag which refers to this arc. | No |
+| `tag` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | Create a new tag which refers to this arc. | No |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-xLine.md

@@ -12,7 +12,7 @@ xLine(
   @sketch: Sketch,
   length?: number(Length),
   endAbsolute?: number(Length),
-  tag?: tag,
+  tag?: TagDecl,
 ): Sketch
 ```
 
@@ -25,7 +25,7 @@ xLine(
 | `sketch` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) | Which sketch should this path be added to? | Yes |
 | `length` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | How far away along the X axis should this line go? Incompatible with `endAbsolute`. | No |
 | `endAbsolute` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Which absolute X value should this line go to? Incompatible with `length`. | No |
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Create a new tag which refers to this line. | No |
+| `tag` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | Create a new tag which refers to this line. | No |
 
 ### Returns
 

docs/kcl-std/functions/std-sketch-yLine.md

@@ -12,7 +12,7 @@ yLine(
   @sketch: Sketch,
   length?: number(Length),
   endAbsolute?: number(Length),
-  tag?: tag,
+  tag?: TagDecl,
 ): Sketch
 ```
 
@@ -25,7 +25,7 @@ yLine(
 | `sketch` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) | Which sketch should this path be added to? | Yes |
 | `length` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | How far away along the Y axis should this line go? Incompatible with `endAbsolute`. | No |
 | `endAbsolute` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Which absolute Y value should this line go to? Incompatible with `length`. | No |
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Create a new tag which refers to this line. | No |
+| `tag` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | Create a new tag which refers to this line. | No |
 
 ### Returns
 

docs/kcl-std/functions/std-solid-chamfer.md

@@ -12,7 +12,7 @@ chamfer(
   @solid: Solid,
   length: number(Length),
   tags: [Edge; 1+],
-  tag?: tag,
+  tag?: TagDecl,
 ): Solid
 ```
 
@@ -27,7 +27,7 @@ a sharp, straight transitional edge.
 | `solid` | [`Solid`](/docs/kcl-std/types/std-types-Solid) | The solid whose edges should be chamfered | Yes |
 | `length` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The length of the chamfer | Yes |
 | `tags` | [`[Edge; 1+]`](/docs/kcl-std/types/std-types-Edge) | The paths you want to chamfer | Yes |
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Create a new tag which refers to this chamfer | No |
+| `tag` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | Create a new tag which refers to this chamfer | No |
 
 ### Returns
 

docs/kcl-std/functions/std-solid-fillet.md

@@ -13,7 +13,7 @@ fillet(
   radius: number(Length),
   tags: [Edge; 1+],
   tolerance?: number(Length),
-  tag?: tag,
+  tag?: TagDecl,
 ): Solid
 ```
 
@@ -29,7 +29,7 @@ will smoothly blend the transition.
 | `radius` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The radius of the fillet | Yes |
 | `tags` | [`[Edge; 1+]`](/docs/kcl-std/types/std-types-Edge) | The paths you want to fillet | Yes |
 | `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The tolerance for this fillet | No |
-| [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Create a new tag which refers to this fillet | No |
+| `tag` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | Create a new tag which refers to this fillet | No |
 
 ### Returns
 

docs/kcl-std/functions/std-solid-shell.md

@@ -11,7 +11,7 @@ Remove volume from a 3-dimensional shape such that a wall of the provided thickn
 shell(
   @solids: [Solid; 1+],
   thickness: number(Length),
-  faces: [tag; 1+],
+  faces: [TaggedFace; 1+],
 ): [Solid]
 ```
 
@@ -23,7 +23,7 @@ shell(
 |----------|------|-------------|----------|
 | `solids` | [`[Solid; 1+]`](/docs/kcl-std/types/std-types-Solid) | Which solid (or solids) to shell out | Yes |
 | `thickness` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The thickness of the shell | Yes |
-| `faces` | [`[tag; 1+]`](/docs/kcl-std/types/std-types-tag) | The faces you want removed | Yes |
+| `faces` | [`[TaggedFace; 1+]`](/docs/kcl-std/types/std-types-TaggedFace) | The faces you want removed | Yes |
 
 ### Returns
 

docs/kcl-std/index.md

@@ -145,12 +145,12 @@ See also the [types overview](/docs/kcl-lang/types)
 
 * [**Primitive types**](/docs/kcl-lang/types)
   * [`ImportedGeometry`](/docs/kcl-std/types/std-types-ImportedGeometry)
+  * [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl)
   * [`any`](/docs/kcl-std/types/std-types-any)
   * [`bool`](/docs/kcl-std/types/std-types-bool)
   * [`fn`](/docs/kcl-std/types/std-types-fn)
   * [`number`](/docs/kcl-std/types/std-types-number)
   * [`string`](/docs/kcl-std/types/std-types-string)
-  * [`tag`](/docs/kcl-std/types/std-types-tag)
 * [**std::types**](/docs/kcl-std/modules/std-types)
   * [`Axis2d`](/docs/kcl-std/types/std-types-Axis2d)
   * [`Axis3d`](/docs/kcl-std/types/std-types-Axis3d)
@@ -162,3 +162,5 @@ See also the [types overview](/docs/kcl-lang/types)
   * [`Point3d`](/docs/kcl-std/types/std-types-Point3d)
   * [`Sketch`](/docs/kcl-std/types/std-types-Sketch)
   * [`Solid`](/docs/kcl-std/types/std-types-Solid)
+  * [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge)
+  * [`TaggedFace`](/docs/kcl-std/types/std-types-TaggedFace)

docs/kcl-std/modules/std-types.md

@@ -24,6 +24,9 @@ Types can (optionally) be used to describe a function's arguments and returned v
 * [`Point3d`](/docs/kcl-std/types/std-types-Point3d)
 * [`Sketch`](/docs/kcl-std/types/std-types-Sketch)
 * [`Solid`](/docs/kcl-std/types/std-types-Solid)
+* [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl)
+* [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge)
+* [`TaggedFace`](/docs/kcl-std/types/std-types-TaggedFace)
 * [`any`](/docs/kcl-std/types/std-types-any)
 * [`bool`](/docs/kcl-std/types/std-types-bool)
 * [`fn`](/docs/kcl-std/types/std-types-fn)

docs/kcl-std/types/std-types-TagDecl.md

@@ -0,0 +1,102 @@
+---
+title: "TagDecl"
+subtitle: "Type in std::types"
+excerpt: "Tags are used to give a name (tag) to a specific path."
+layout: manual
+---
+
+Tags are used to give a name (tag) to a specific path.
+
+### Tag Declaration
+
+The syntax for declaring a tag is `$myTag`. You would use it in the following
+way:
+
+```js
+startSketchOn(XZ)
+  |> startProfile(at = origin)
+  |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+  |> angledLine(
+       angle = segAng(rectangleSegmentA001) - 90deg,
+       length = 196.99,
+       tag = $rectangleSegmentB001,
+     )
+  |> angledLine(
+       angle = segAng(rectangleSegmentA001),
+       length = -segLen(rectangleSegmentA001),
+       tag = $rectangleSegmentC001,
+     )
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
+```
+
+### Tag Scope
+
+Tags are scoped globally if in the root context meaning in this example you can
+use the tag `rectangleSegmentA001` in any function or expression in the file.
+
+However if the code was written like this:
+
+```js
+fn rect(origin) {
+  return startSketchOn(XZ)
+    |> startProfile(at = origin)
+    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+    |> angledLine(
+         angle = segAng(rectangleSegmentA001) - 90,
+         length = 196.99,
+         tag = $rectangleSegmentB001
+       )
+    |> angledLine(
+         angle = segAng(rectangleSegmentA001),
+         length = -segLen(rectangleSegmentA001),
+         tag = $rectangleSegmentC001
+       )
+    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+    |> close()
+}
+
+rect(origin = [0, 0])
+rect(origin = [20, 0])
+```
+
+Those tags would only be available in the `rect` function and not globally.
+
+However you likely want to use those tags somewhere outside the `rect` function.
+
+Tags are accessible through the sketch group they are declared in.
+For example the following code works.
+
+```js
+fn rect(origin) {
+  return startSketchOn(XZ)
+    |> startProfile(at = origin)
+    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+    |> angledLine(
+         angle = segAng(rectangleSegmentA001) - 90deg,
+         length = 196.99,
+         tag = $rectangleSegmentB001,
+       )
+    |> angledLine(
+         angle = segAng(rectangleSegmentA001),
+         length = -segLen(rectangleSegmentA001),
+         tag = $rectangleSegmentC001,
+       )
+    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+    |> close()
+}
+
+rect(origin = [0, 0])
+myRect = rect(origin = [20, 0])
+
+myRect
+  |> extrude(length = 10)
+  |> fillet(radius = 0.5, tags = [myRect.tags.rectangleSegmentA001])
+```
+
+See how we use the tag `rectangleSegmentA001` in the `fillet` function outside
+the `rect` function. This is because the `rect` function is returning the
+sketch group that contains the tags.
+
+
+

docs/kcl-std/types/std-types-TaggedEdge.md

@@ -0,0 +1,17 @@
+---
+title: "TaggedEdge"
+subtitle: "Type in std::types"
+excerpt: "A tag which references a line, arc, or other edge in a sketch or an edge of a solid."
+layout: manual
+---
+
+A tag which references a line, arc, or other edge in a sketch or an edge of a solid.
+
+Created by using a tag declarator (see the docs for [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl)). Can be used where an [`Edge`](/docs/kcl-std/types/std-types-Edge) is
+required.
+
+If a line in a sketch is tagged and then the sketch is extruded, the tag is a [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge) before
+extrusion and a [`TaggedFace`](/docs/kcl-std/types/std-types-TaggedFace) after extrusion.
+
+
+

docs/kcl-std/types/std-types-TaggedFace.md

@@ -0,0 +1,16 @@
+---
+title: "TaggedFace"
+subtitle: "Type in std::types"
+excerpt: "A tag which references a face of a solid, including the distinguished tags `START` and `END`."
+layout: manual
+---
+
+A tag which references a face of a solid, including the distinguished tags `START` and `END`.
+
+Created by using a tag declarator (see the docs for [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl)).
+
+If a line in a sketch is tagged and then the sketch is extruded, the tag is a [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge) before
+extrusion and a [`TaggedFace`](/docs/kcl-std/types/std-types-TaggedFace) after extrusion.
+
+
+

docs/kcl-std/types/std-types-tag.md

@@ -1,109 +1,19 @@
 ---
 title: "tag"
 subtitle: "Type in std::types"
-excerpt: "Tags are used to give a name (tag) to a specific path."
+excerpt: "Reference a previously created tag. Used much like a variable."
 layout: manual
 ---
 
-Tags are used to give a name (tag) to a specific path.
+**WARNING:** This type is deprecated.
 
-### Tag Declaration
+Reference a previously created tag. Used much like a variable.
 
-The syntax for declaring a tag is `$myTag` you would use it in the following
+```kcl
-way:
+type tag = TaggedEdge
-
-```js
-startSketchOn(XZ)
-  |> startProfile(at = origin)
-  |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
-  |> angledLine(
-       angle = segAng(rectangleSegmentA001) - 90deg,
-       length = 196.99,
-       tag = $rectangleSegmentB001,
-     )
-  |> angledLine(
-       angle = segAng(rectangleSegmentA001),
-       length = -segLen(rectangleSegmentA001),
-       tag = $rectangleSegmentC001,
-     )
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close()
 ```
 
-### Tag Identifier
+Prefer to use [`TaggedEdge`](/docs/kcl-std/types/std-types-TaggedEdge) or [`TaggedFace`](/docs/kcl-std/types/std-types-TaggedFace). For more details on tags, see the docs for [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl).
-
-As per the example above you can use the tag identifier to get a reference to the
-tagged object. The syntax for this is `myTag`.
-
-In the example above we use the tag identifier to get the angle of the segment
-`segAng(rectangleSegmentA001)`.
-
-### Tag Scope
-
-Tags are scoped globally if in the root context meaning in this example you can
-use the tag `rectangleSegmentA001` in any function or expression in the file.
-
-However if the code was written like this:
-
-```js
-fn rect(origin) {
-  return startSketchOn(XZ)
-    |> startProfile(at = origin)
-    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
-    |> angledLine(
-         angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99,
-         tag = $rectangleSegmentB001)
-    |> angledLine(
-         angle = segAng(rectangleSegmentA001),
-         length = -segLen(rectangleSegmentA001),
-         tag = $rectangleSegmentC001
-       )
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()
-}
-
-rect(origin = [0, 0])
-rect(origin = [20, 0])
-```
-
-Those tags would only be available in the `rect` function and not globally.
-
-However you likely want to use those tags somewhere outside the `rect` function.
-
-Tags are accessible through the sketch group they are declared in.
-For example the following code works.
-
-```js
-fn rect(origin) {
-  return startSketchOn(XZ)
-    |> startProfile(at = origin)
-    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
-    |> angledLine(
-         angle = segAng(rectangleSegmentA001) - 90deg,
-         length = 196.99
-         tag = $rectangleSegmentB001,
-       )
-    |> angledLine(
-         angle = segAng(rectangleSegmentA001),
-         length = -segLen(rectangleSegmentA001)
-         tag = $rectangleSegmentC001,
-       )
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()
-}
-
-rect(origin = [0, 0])
-myRect = rect(origin = [20, 0])
-
-myRect
-  |> extrude(length = 10)
-  |> fillet(radius = 0.5, tags = [myRect.tags.rectangleSegmentA001])
-```
-
-See how we use the tag `rectangleSegmentA001` in the `fillet` function outside
-the `rect` function. This is because the `rect` function is returning the
-sketch group that contains the tags.
 
 
 

e2e/playwright/command-bar-tests.spec.ts

@@ -4,7 +4,6 @@ import * as fsp from 'fs/promises'
 
 import { executorInputPath, getUtils } from '@e2e/playwright/test-utils'
 import { expect, test } from '@e2e/playwright/zoo-test'
-import { expectPixelColor } from '@e2e/playwright/fixtures/sceneFixture'
 
 test.describe('Command bar tests', () => {
   test('Extrude from command bar selects extrude line after', async ({
@@ -515,47 +514,6 @@ test.describe('Command bar tests', () => {
     })
   })
 
-  test(
-    `Zoom to fit to shared model on web`,
-    { tag: ['@web'] },
-    async ({ page, scene }) => {
-      if (process.env.TARGET !== 'web') {
-        // This test is web-only
-        // TODO: re-enable on CI as part of a new @web test suite
-        return
-      }
-      await test.step(`Prepare and navigate to home page with query params`, async () => {
-        // a quad in the top left corner of the XZ plane (which is out of the current view)
-        const code = `sketch001 = startSketchOn(XZ)
-profile001 = startProfile(sketch001, at = [-484.34, 484.95])
-  |> yLine(length = -69.1)
-  |> xLine(length = 66.84)
-  |> yLine(length = 71.37)
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close()
-`
-        const targetURL = `?create-file=true&name=test&units=mm&code=${encodeURIComponent(btoa(code))}&ask-open-desktop=true`
-        await page.goto(page.url() + targetURL)
-        expect(page.url()).toContain(targetURL)
-      })
-
-      await test.step(`Submit the command`, async () => {
-        await page.getByTestId('continue-to-web-app-button').click()
-
-        await scene.connectionEstablished()
-
-        // This makes SystemIOMachineActors.createKCLFile run after EngineStream/firstPlay
-        await page.waitForTimeout(3000)
-
-        await page.getByTestId('command-bar-submit').click()
-      })
-
-      await test.step(`Ensure we created the project and are in the modeling scene`, async () => {
-        await expectPixelColor(page, [252, 252, 252], { x: 600, y: 260 }, 8)
-      })
-    }
-  )
-
   test(`Can add and edit a named parameter or constant`, async ({
     page,
     homePage,

e2e/playwright/projects.spec.ts

@@ -170,7 +170,7 @@ test(
       // error text on hover
       await page.hover('.cm-lint-marker-error')
       const crypticErrorText =
-        'tag requires a value with type `tag`, but found a value with type `string`.'
+        'tag requires a value with type `TagDecl`, but found a value with type `string`.'
       await expect(page.getByText(crypticErrorText).first()).toBeVisible()
 
       // black pixel means the scene has been cleared.
@@ -369,7 +369,7 @@ test(
       // error text on hover
       await page.hover('.cm-lint-marker-error')
       const crypticErrorText =
-        'tag requires a value with type `tag`, but found a value with type `string`.'
+        'tag requires a value with type `TagDecl`, but found a value with type `string`.'
       await expect(page.getByText(crypticErrorText).first()).toBeVisible()
 
       // black pixel means the scene has been cleared.
@@ -408,7 +408,7 @@ test(
     // error text on hover
     await page.hover('.cm-lint-marker-error')
     const crypticErrorText =
-      'tag requires a value with type `tag`, but found a value with type `string`.'
+      'tag requires a value with type `TagDecl`, but found a value with type `string`.'
     await expect(page.getByText(crypticErrorText).first()).toBeVisible()
   }
 )

e2e/playwright/regression-tests.spec.ts

@@ -575,7 +575,7 @@ extrude002 = extrude(profile002, length = 150)
         name: 'Projects',
       })
       const projectLink = page.getByRole('link', { name: 'bracket' })
-      const networkHealthIndicator = page.getByTestId('network-toggle')
+      const networkHealthIndicator = page.getByTestId(/network-toggle/)
 
       await test.step('Check the home page', async () => {
         await expect(projectsHeading).toBeVisible()

e2e/playwright/sketch-tests.spec.ts

@@ -1445,6 +1445,48 @@ solid001 = subtract([extrude001], tools = [extrude002])
     await u.closeDebugPanel()
   })
 
+  test('Can edit a tangentialArc defined by angle and radius', async ({
+    page,
+    homePage,
+    editor,
+    toolbar,
+    scene,
+    cmdBar,
+  }) => {
+    const viewportSize = { width: 1500, height: 750 }
+    await page.setBodyDimensions(viewportSize)
+
+    await page.addInitScript(async () => {
+      localStorage.setItem(
+        'persistCode',
+        `@settings(defaultLengthUnit=in)
+sketch001 = startSketchOn(XZ)
+  |> startProfile(at = [-10, -10])
+  |> line(end = [20.0, 10.0])
+  |> tangentialArc(angle = 60deg, radius=10.0)`
+      )
+    })
+
+    await homePage.goToModelingScene()
+    await toolbar.waitForFeatureTreeToBeBuilt()
+    await scene.settled(cmdBar)
+
+    await (await toolbar.getFeatureTreeOperation('Sketch', 0)).dblclick()
+
+    await page.waitForTimeout(1000)
+
+    await page.mouse.move(1200, 139)
+    await page.mouse.down()
+    await page.mouse.move(870, 250)
+
+    await page.waitForTimeout(200)
+
+    await editor.expectEditor.toContain(
+      `tangentialArc(angle = 234.01deg, radius = 4.08)`,
+      { shouldNormalise: true }
+    )
+  })
+
   test('Can delete a single segment line with keyboard', async ({
     page,
     scene,

e2e/playwright/snapshot-tests.spec.ts

@@ -798,7 +798,7 @@ test('theme persists', async ({ page, context, homePage }) => {
 
   await page.getByTestId('settings-close-button').click()
 
-  const networkToggle = page.getByTestId('network-toggle')
+  const networkToggle = page.getByTestId(/network-toggle/)
 
   // simulate network down
   await u.emulateNetworkConditions({

e2e/playwright/temporary-workspace.spec.ts

@@ -0,0 +1,117 @@
+import { expect, test } from '@e2e/playwright/zoo-test'
+import { stringToBase64 } from '@src/lib/base64'
+
+test.describe('Temporary workspace', () => {
+  test(
+    'Opening a share link creates a temporary environment that is not saved',
+    { tag: ['@web'] },
+    async ({ page, editor, scene, cmdBar, homePage }) => {
+      await test.step('Pre-condition: editor is empty', async () => {
+        await homePage.goToModelingScene()
+        await scene.settled(cmdBar)
+        await editor.expectEditor.toContain('')
+      })
+
+      await test.step('Go to share link, check new content present, make a change', async () => {
+        const code = `sketch001 = startSketchOn(XY)
+  profile001 = startProfile(sketch001, at = [-124.89, -186.4])
+    |> line(end = [391.31, 444.04])
+    |> line(end = [96.21, -493.07])
+    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+    |> close()
+  extrude001 = extrude(profile001, length = 5)
+`
+
+        const codeQueryParam = encodeURIComponent(stringToBase64(code))
+        const targetURL = `?create-file=true&browser=test&code=${codeQueryParam}&ask-open-desktop=true`
+        await page.goto(page.url() + targetURL)
+        await expect.poll(() => page.url()).toContain(targetURL)
+        const button = page.getByRole('button', { name: 'Continue to web app' })
+        await button.click()
+
+        await editor.expectEditor.toContain(code, { shouldNormalise: true })
+        await editor.scrollToText('-124.89', true)
+        await page.keyboard.press('9')
+        await page.keyboard.press('9')
+      })
+
+      await test.step('Post-condition: empty editor once again (original state)', async () => {
+        await homePage.goToModelingScene()
+        await scene.settled(cmdBar)
+        const code = await page.evaluate(() =>
+          window.localStorage.getItem('persistCode')
+        )
+        await expect(code).toContain('')
+      })
+    }
+  )
+
+  test(
+    'Opening a sample link creates a temporary environment that is not saved',
+    { tag: ['@web'] },
+    async ({ page, editor, scene, cmdBar, homePage }) => {
+      await test.step('Pre-condition: editor is empty', async () => {
+        await homePage.goToModelingScene()
+        await scene.settled(cmdBar)
+        await editor.expectEditor.toContain('')
+      })
+
+      await test.step('Load sample, make an edit', async () => {
+        await page.goto(
+          `${page.url()}/?cmd=add-kcl-file-to-project&groupId=application&projectName=browser&source=kcl-samples&sample=brake-rotor/main.kcl`
+        )
+
+        await editor.scrollToText('114.3', true)
+        await page.keyboard.press('9')
+        await page.keyboard.press('9')
+      })
+
+      await test.step('Post-condition: empty editor once again (original state)', async () => {
+        await homePage.goToModelingScene()
+        await scene.settled(cmdBar)
+        const code = await page.evaluate(() =>
+          window.localStorage.getItem('persistCode')
+        )
+        await expect(code).toContain('')
+      })
+    }
+  )
+
+  test(
+    'Hitting save will save the temporary workspace',
+    { tag: ['@web'] },
+    async ({ page, editor, scene, cmdBar, homePage }) => {
+      const buttonSaveTemporaryWorkspace = page.getByTestId('tws-save')
+
+      await test.step('Pre-condition: editor is empty', async () => {
+        await homePage.goToModelingScene()
+        await scene.settled(cmdBar)
+        await editor.expectEditor.toContain('')
+      })
+
+      await test.step('Load sample, make an edit, *save*', async () => {
+        await page.goto(
+          `${page.url()}/?cmd=add-kcl-file-to-project&groupId=application&projectName=browser&source=kcl-samples&sample=brake-rotor/main.kcl`
+        )
+        await homePage.goToModelingScene()
+        await scene.settled(cmdBar)
+
+        await editor.scrollToText('114.3')
+        await editor.replaceCode('114.3', '999.9133')
+        await editor.expectEditor.toContain('999.9133')
+
+        await buttonSaveTemporaryWorkspace.click()
+        await expect(buttonSaveTemporaryWorkspace).not.toBeVisible()
+
+        await editor.expectEditor.toContain('999.9133')
+      })
+
+      await test.step('Post-condition: has the edits in localStorage', async () => {
+        const code = await page.evaluate(() =>
+          window.localStorage.getItem('persistCode')
+        )
+        await expect(code).toContain('999.9133')
+      })
+    }
+  )
+})

e2e/playwright/test-network-and-connection-issues.spec.ts

@@ -24,16 +24,15 @@ test.describe('Test network related behaviors', () => {
 
       await homePage.goToModelingScene()
 
-      const networkToggle = page.getByTestId('network-toggle')
+      const networkToggle = page.getByTestId(/network-toggle/)
 
       // This is how we wait until the stream is online
       await expect(
         page.getByRole('button', { name: 'Start Sketch' })
       ).not.toBeDisabled({ timeout: 15000 })
 
-      const networkWidget = page.locator('[data-testid="network-toggle"]')
+      await expect(networkToggle).toBeVisible()
-      await expect(networkWidget).toBeVisible()
+      await networkToggle.hover()
-      await networkWidget.hover()
 
       const networkPopover = page.locator('[data-testid="network-popover"]')
       await expect(networkPopover).not.toBeVisible()
@@ -44,7 +43,7 @@ test.describe('Test network related behaviors', () => {
       ).toBeVisible()
 
       // Click the network widget
-      await networkWidget.click()
+      await networkToggle.click()
 
       // Check the modal opened.
       await expect(networkPopover).toBeVisible()
@@ -65,8 +64,8 @@ test.describe('Test network related behaviors', () => {
       // Expect the network to be down
       await expect(networkToggle).toContainText('Network health (Offline)')
 
-      // Click the network widget
+      // Click the network toggle
-      await networkWidget.click()
+      await networkToggle.click()
 
       // Check the modal opened.
       await expect(networkPopover).toBeVisible()
@@ -99,7 +98,7 @@ test.describe('Test network related behaviors', () => {
     'Engine disconnect & reconnect in sketch mode',
     { tag: '@skipLocalEngine' },
     async ({ page, homePage, toolbar, scene, cmdBar }) => {
-      const networkToggle = page.getByTestId('network-toggle')
+      const networkToggle = page.getByTestId(/network-toggle/)
       const networkToggleConnectedText = page.getByText(
         'Network health (Strong)'
       )
@@ -286,7 +285,7 @@ profile001 = startProfile(sketch001, at = [12.34, -12.34])
     'Paused stream freezes view frame, unpause reconnect is seamless to user',
     { tag: ['@desktop', '@skipLocalEngine'] },
     async ({ page, homePage, scene, cmdBar, toolbar, tronApp }) => {
-      const networkToggle = page.getByTestId('network-toggle')
+      const networkToggle = page.getByTestId(/network-toggle/)
       const networkToggleConnectedText = page.getByText(
         'Network health (Strong)'
       )

e2e/playwright/test-utils.ts

@@ -37,7 +37,7 @@ export const headerMasks = (page: Page) => [
 ]
 
 export const lowerRightMasks = (page: Page) => [
-  page.getByTestId('network-toggle'),
+  page.getByTestId(/network-toggle/),
   page.getByTestId('billing-remaining-bar'),
 ]
 

e2e/playwright/testing-gizmo.spec.ts

@@ -8,37 +8,37 @@ test.describe('Testing Gizmo', () => {
   const cases = [
     {
       testDescription: 'top view',
-      clickPosition: { x: 951, y: 385 },
+      clickPosition: { x: 951, y: 402 },
       expectedCameraPosition: { x: 800, y: -152, z: 4886.02 },
       expectedCameraTarget: { x: 800, y: -152, z: 26 },
     },
     {
       testDescription: 'bottom view',
-      clickPosition: { x: 951, y: 429 },
+      clickPosition: { x: 951, y: 449 },
       expectedCameraPosition: { x: 800, y: -152, z: -4834.02 },
       expectedCameraTarget: { x: 800, y: -152, z: 26 },
     },
     {
       testDescription: 'right view',
-      clickPosition: { x: 929, y: 417 },
+      clickPosition: { x: 929, y: 435 },
       expectedCameraPosition: { x: 5660.02, y: -152, z: 26 },
       expectedCameraTarget: { x: 800, y: -152, z: 26 },
     },
     {
       testDescription: 'left view',
-      clickPosition: { x: 974, y: 397 },
+      clickPosition: { x: 974, y: 417 },
       expectedCameraPosition: { x: -4060.02, y: -152, z: 26 },
       expectedCameraTarget: { x: 800, y: -152, z: 26 },
     },
     {
       testDescription: 'back view',
-      clickPosition: { x: 967, y: 421 },
+      clickPosition: { x: 967, y: 441 },
       expectedCameraPosition: { x: 800, y: 4708.02, z: 26 },
       expectedCameraTarget: { x: 800, y: -152, z: 26 },
     },
     {
       testDescription: 'front view',
-      clickPosition: { x: 935, y: 393 },
+      clickPosition: { x: 935, y: 413 },
       expectedCameraPosition: { x: 800, y: -5012.02, z: 26 },
       expectedCameraTarget: { x: 800, y: -152, z: 26 },
     },

public/kcl-samples/README.md

@@ -109,6 +109,8 @@ When you submit a PR to add or modify KCL samples, images will be generated and
 [![makeup-mirror](screenshots/makeup-mirror.png)](makeup-mirror/main.kcl)
 #### [mounting-plate](mounting-plate/main.kcl) ([screenshot](screenshots/mounting-plate.png))
 [![mounting-plate](screenshots/mounting-plate.png)](mounting-plate/main.kcl)
+#### [mug](mug/main.kcl) ([screenshot](screenshots/mug.png))
+[![mug](screenshots/mug.png)](mug/main.kcl)
 #### [multi-axis-robot](multi-axis-robot/main.kcl) ([screenshot](screenshots/multi-axis-robot.png))
 [![multi-axis-robot](screenshots/multi-axis-robot.png)](multi-axis-robot/main.kcl)
 #### [pdu-faceplate](pdu-faceplate/main.kcl) ([screenshot](screenshots/pdu-faceplate.png))
@@ -139,6 +141,8 @@ When you submit a PR to add or modify KCL samples, images will be generated and
 [![socket-head-cap-screw](screenshots/socket-head-cap-screw.png)](socket-head-cap-screw/main.kcl)
 #### [spinning-highrise-tower](spinning-highrise-tower/main.kcl) ([screenshot](screenshots/spinning-highrise-tower.png))
 [![spinning-highrise-tower](screenshots/spinning-highrise-tower.png)](spinning-highrise-tower/main.kcl)
+#### [spool](spool/main.kcl) ([screenshot](screenshots/spool.png))
+[![spool](screenshots/spool.png)](spool/main.kcl)
 #### [spur-gear](spur-gear/main.kcl) ([screenshot](screenshots/spur-gear.png))
 [![spur-gear](screenshots/spur-gear.png)](spur-gear/main.kcl)
 #### [spur-reduction-gearset](spur-reduction-gearset/main.kcl) ([screenshot](screenshots/spur-reduction-gearset.png))
@@ -147,6 +151,8 @@ When you submit a PR to add or modify KCL samples, images will be generated and
 [![surgical-drill-guide](screenshots/surgical-drill-guide.png)](surgical-drill-guide/main.kcl)
 #### [t-slot-rail](t-slot-rail/main.kcl) ([screenshot](screenshots/t-slot-rail.png))
 [![t-slot-rail](screenshots/t-slot-rail.png)](t-slot-rail/main.kcl)
+#### [teapot](teapot/main.kcl) ([screenshot](screenshots/teapot.png))
+[![teapot](screenshots/teapot.png)](teapot/main.kcl)
 #### [telemetry-antenna](telemetry-antenna/main.kcl) ([screenshot](screenshots/telemetry-antenna.png))
 [![telemetry-antenna](screenshots/telemetry-antenna.png)](telemetry-antenna/main.kcl)
 #### [thermal-block-insert](thermal-block-insert/main.kcl) ([screenshot](screenshots/thermal-block-insert.png))

public/kcl-samples/manifest.json

@@ -447,6 +447,16 @@
       "main.kcl"
     ]
   },
+  {
+    "file": "main.kcl",
+    "pathFromProjectDirectoryToFirstFile": "mug/main.kcl",
+    "multipleFiles": false,
+    "title": "Mug",
+    "description": "A cup with straight sides and a handle, typically used for hot drinks",
+    "files": [
+      "main.kcl"
+    ]
+  },
   {
     "file": "main.kcl",
     "pathFromProjectDirectoryToFirstFile": "multi-axis-robot/main.kcl",
@@ -612,6 +622,16 @@
       "main.kcl"
     ]
   },
+  {
+    "file": "main.kcl",
+    "pathFromProjectDirectoryToFirstFile": "spool/main.kcl",
+    "multipleFiles": false,
+    "title": "Spool",
+    "description": "A spool is a winding device for storing large batches of filament, wire, tape, etc",
+    "files": [
+      "main.kcl"
+    ]
+  },
   {
     "file": "main.kcl",
     "pathFromProjectDirectoryToFirstFile": "spur-gear/main.kcl",
@@ -652,6 +672,16 @@
       "main.kcl"
     ]
   },
+  {
+    "file": "main.kcl",
+    "pathFromProjectDirectoryToFirstFile": "teapot/main.kcl",
+    "multipleFiles": false,
+    "title": "Teapot",
+    "description": "A vessel with a spout and a handle used for serving tea and boiling water on a stovetop",
+    "files": [
+      "main.kcl"
+    ]
+  },
   {
     "file": "main.kcl",
     "pathFromProjectDirectoryToFirstFile": "telemetry-antenna/main.kcl",

public/kcl-samples/mug/main.kcl

@@ -0,0 +1,81 @@
+// Mug
+// A cup with straight sides and a handle, typically used for hot drinks
+
+// Set units
+@settings(defaultLengthUnit = mm)
+
+// Define parameters
+mugDiameter = 80
+mugHeight = 95
+wallThickness = 6
+handleWidth = 18
+handleThickness = 5
+
+// Revolve the outer perimeter of the mug body. This will be used to subtract material from the handle, so that it fits snug to the body
+tools = startSketchOn(XZ)
+  |> startProfile(at = [0, mugDiameter * 0.04])
+  |> xLine(length = mugDiameter * 0.1)
+  |> tangentialArc(endAbsolute = [mugDiameter * 0.3, mugDiameter * 0.01])
+  |> arc(angleStart = -180, angleEnd = -90, radius = mugDiameter * 0.01)
+  |> xLine(length = mugDiameter * 0.025)
+  |> arc(angleStart = -90, angleEnd = 0, radius = mugDiameter * 0.01)
+  |> xLine(endAbsolute = mugDiameter * 0.35)
+  |> tangentialArc(angle = 90, radius = mugDiameter * 0.15)
+  |> yLine(endAbsolute = mugHeight - (wallThickness / 2))
+  |> tangentialArc(angle = 90, diameter = wallThickness)
+  |> xLine(endAbsolute = profileStartX())
+  |> yLine(endAbsolute = profileStartY())
+  |> close()
+  |> revolve(axis = Y)
+
+// Draw the path of the mug handle
+handlePath = startSketchOn(XZ)
+  |> startProfile(at = [mugDiameter / 3, mugHeight * 0.25])
+  |> angledLine(angle = -5, length = mugDiameter / 3)
+  |> tangentialArc(angle = 90, radius = mugHeight * 0.15)
+  |> tangentialArc(end = [0, mugHeight * 0.425])
+  |> tangentialArc(angle = 90, radius = mugHeight * 0.15, tag = $seg02)
+  |> angledLine(angle = tangentToEnd(seg02), endAbsoluteX = profileStartX())
+
+// Sweep the handle profile along the path
+handle = startSketchOn(offsetPlane(YZ, offset = mugDiameter / 3))
+  |> startProfile(at = [
+       -handleWidth / 2,
+       mugHeight * 0.25 + handleThickness / 2
+     ])
+  |> arc(
+       interiorAbsolute = [
+         0,
+         profileStartY() + handleThickness / 4
+       ],
+       endAbsolute = [handleWidth / 2, profileStartY()],
+     )
+  |> tangentialArc(end = [0, -handleThickness])
+  |> tangentialArc(end = [-handleWidth, 0])
+  |> tangentialArc(endAbsolute = profileStart())
+  |> close()
+  |> sweep(path = handlePath)
+  |> subtract(tools)
+
+// Create the body of the mug
+mug = startSketchOn(XZ)
+  |> startProfile(at = [0, mugDiameter * 0.04])
+  |> xLine(length = mugDiameter * 0.1)
+  |> tangentialArc(endAbsolute = [mugDiameter * 0.3, mugDiameter * 0.01])
+  |> arc(angleStart = -180, angleEnd = -90, radius = mugDiameter * 0.01)
+  |> xLine(length = mugDiameter * 0.025)
+  |> arc(angleStart = -90, angleEnd = 0, radius = mugDiameter * 0.01)
+  |> xLine(endAbsolute = mugDiameter * 0.35)
+  |> tangentialArc(angle = 90, radius = mugDiameter * 0.15)
+  |> yLine(endAbsolute = mugHeight - (wallThickness / 2))
+  |> tangentialArc(angle = 180, diameter = wallThickness)
+  |> yLine(endAbsolute = mugDiameter * 0.15)
+  |> tangentialArc(angle = -90, radius = lastSegX() * 0.2)
+  |> xLine(endAbsolute = profileStartX())
+  |> yLine(endAbsolute = profileStartY())
+  |> close()
+  |> revolve(axis = Y)
+
+// Join the mug and handle, then add an appearance
+[handle, mug]
+  |> appearance(color = "#9b1212", metalness = 40, roughness = 30)