add test

Signed-off-by: Jess Frazelle <github@jessfraz.com>

docs/kcl-std/functions/std-sketch-circle.md

@@ -11,8 +11,7 @@ layout: manual
 circle(
   @sketch_or_surface: Sketch | Plane | Face,
   center: Point2d,
-  radius?: number(Length),
+  radius: number(Length),
-  diameter?: number(Length),
   tag?: tag,
 ): Sketch
 ```
@@ -26,8 +25,7 @@ the provided (x, y) origin point.
 |----------|------|-------------|----------|
 | `sketch_or_surface` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) or [`Plane`](/docs/kcl-std/types/std-types-Plane) or [`Face`](/docs/kcl-std/types/std-types-Face) | Sketch to extend, or plane or surface to sketch on. | Yes |
 | `center` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | The center of the circle. | Yes |
-| `radius` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The radius of the circle. Incompatible with `diameter`. | No |
+| `radius` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The radius of the circle. | Yes |
-| `diameter` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The diameter of the circle. Incompatible with `radius`. | No |
 | [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Create a new tag which refers to this circle. | No |
 
 ### Returns
@@ -53,7 +51,7 @@ exampleSketch = startSketchOn(XZ)
   |> line(end = [0, 30])
   |> line(end = [-30, 0])
   |> close()
-  |> subtract2d(tool = circle(center = [0, 15], diameter = 10))
+  |> subtract2d(tool = circle(center = [0, 15], radius = 5))
 
 example = extrude(exampleSketch, length = 5)
 ```

e2e/playwright/command-bar-tests.spec.ts

@@ -45,16 +45,15 @@ test.describe('Command bar tests', () => {
     await cmdBar.expectState({
       stage: 'arguments',
       commandName: 'Extrude',
-      currentArgKey: 'sketches',
+      currentArgKey: 'length',
-      currentArgValue: '',
+      currentArgValue: '5',
       headerArguments: {
-        Profiles: '',
+        Profiles: '1 profile',
         Length: '',
       },
-      highlightedHeaderArg: 'Profiles',
+      highlightedHeaderArg: 'length',
     })
     await cmdBar.progressCmdBar()
-    await cmdBar.progressCmdBar()
     await cmdBar.expectState({
       stage: 'review',
       commandName: 'Extrude',

e2e/playwright/editor-tests.spec.ts

@@ -1134,7 +1134,6 @@ sketch001 = startSketchOn(XZ)
     // Wait for the selection to register (TODO: we need a definitive way to wait for this)
     await page.waitForTimeout(200)
     await toolbar.extrudeButton.click()
-    await cmdBar.progressCmdBar()
     await cmdBar.expectState({
       stage: 'arguments',
       currentArgKey: 'length',
@@ -1356,7 +1355,9 @@ sketch001 = startSketchOn(XZ)
       const u = await getUtils(page)
       const projectLink = page.getByRole('link', { name: 'cube' })
       const gizmo = page.locator('[aria-label*=gizmo]')
-      const resetCameraButton = page.getByRole('button', { name: 'Reset view' })
+      const resetCameraButton = page.getByRole('button', {
+        name: 'Reset view',
+      })
       const locationToHaveColor = async (
         position: { x: number; y: number },
         color: [number, number, number]

e2e/playwright/point-click.spec.ts

@@ -74,15 +74,6 @@ test.describe('Point-and-click tests', () => {
 
     await test.step('do extrude flow and check extrude code is added to editor', async () => {
       await toolbar.extrudeButton.click()
-      await cmdBar.expectState({
-        stage: 'arguments',
-        currentArgKey: 'sketches',
-        currentArgValue: '',
-        headerArguments: { Profiles: '', Length: '' },
-        highlightedHeaderArg: 'Profiles',
-        commandName: 'Extrude',
-      })
-      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'length',
@@ -1654,15 +1645,6 @@ sketch002 = startSketchOn(plane001)
 
         await test.step(`Go through the command bar flow with preselected sketches`, async () => {
           await toolbar.loftButton.click()
-          await cmdBar.expectState({
-            stage: 'arguments',
-            currentArgKey: 'sketches',
-            currentArgValue: '',
-            headerArguments: { Profiles: '' },
-            highlightedHeaderArg: 'Profiles',
-            commandName: 'Loft',
-          })
-          await cmdBar.progressCmdBar()
           await cmdBar.expectState({
             stage: 'review',
             headerArguments: { Profiles: '2 profiles' },
@@ -2110,18 +2092,6 @@ extrude001 = extrude(sketch001, length = -12)
     await test.step(`Apply fillet to the preselected edge`, async () => {
       await page.waitForTimeout(100)
       await toolbar.filletButton.click()
-      await cmdBar.expectState({
-        commandName: 'Fillet',
-        highlightedHeaderArg: 'selection',
-        currentArgKey: 'selection',
-        currentArgValue: '',
-        headerArguments: {
-          Selection: '',
-          Radius: '',
-        },
-        stage: 'arguments',
-      })
-      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         commandName: 'Fillet',
         highlightedHeaderArg: 'radius',
@@ -2651,18 +2621,6 @@ extrude001 = extrude(profile001, length = 5)
       await test.step(`Apply fillet`, async () => {
         await page.waitForTimeout(100)
         await toolbar.filletButton.click()
-        await cmdBar.expectState({
-          commandName: 'Fillet',
-          highlightedHeaderArg: 'selection',
-          currentArgKey: 'selection',
-          currentArgValue: '',
-          headerArguments: {
-            Selection: '',
-            Radius: '',
-          },
-          stage: 'arguments',
-        })
-        await cmdBar.progressCmdBar()
         await cmdBar.expectState({
           commandName: 'Fillet',
           highlightedHeaderArg: 'radius',
@@ -2768,19 +2726,6 @@ extrude001 = extrude(sketch001, length = -12)
     await test.step(`Apply chamfer to the preselected edge`, async () => {
       await page.waitForTimeout(100)
       await toolbar.chamferButton.click()
-      await cmdBar.expectState({
-        commandName: 'Chamfer',
-        highlightedHeaderArg: 'selection',
-        currentArgKey: 'selection',
-        currentArgValue: '',
-        headerArguments: {
-          Selection: '',
-          Length: '',
-        },
-        stage: 'arguments',
-      })
-      await cmdBar.progressCmdBar()
-      await page.waitForTimeout(1000)
       await cmdBar.expectState({
         commandName: 'Chamfer',
         highlightedHeaderArg: 'length',
@@ -3264,8 +3209,6 @@ extrude001 = extrude(sketch001, length = 30)
         await test.step(`Go through the command bar flow with a preselected face (cap)`, async () => {
           await toolbar.shellButton.click()
           await cmdBar.progressCmdBar()
-          await page.waitForTimeout(500)
-          await cmdBar.progressCmdBar()
           await cmdBar.expectState({
             stage: 'review',
             headerArguments: {
@@ -3699,12 +3642,13 @@ tag=$rectangleSegmentC002,
       // revolve
       await editor.scrollToText(codeToSelection)
       await page.getByText(codeToSelection).click()
+      // Wait for the selection to register (TODO: we need a definitive way to wait for this)
+      await page.waitForTimeout(200)
       await toolbar.revolveButton.click()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
-      await cmdBar.progressCmdBar()
 
       const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360, axis = X)`
       expect(editor.expectEditor.toContain(newCodeToFind)).toBeTruthy()
@@ -4633,18 +4577,6 @@ path001 = startProfile(sketch001, at = [0, 0])
 
     await test.step('Go through command bar flow', async () => {
       await toolbar.extrudeButton.click()
-      await cmdBar.expectState({
-        stage: 'arguments',
-        currentArgKey: 'sketches',
-        currentArgValue: '',
-        headerArguments: {
-          Profiles: '',
-          Length: '',
-        },
-        highlightedHeaderArg: 'Profiles',
-        commandName: 'Extrude',
-      })
-      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'length',
@@ -4727,19 +4659,6 @@ path001 = startProfile(sketch001, at = [0, 0])
 
     await test.step('Go through command bar flow', async () => {
       await toolbar.sweepButton.click()
-      await cmdBar.expectState({
-        stage: 'arguments',
-        currentArgKey: 'sketches',
-        currentArgValue: '',
-        headerArguments: {
-          Profiles: '',
-          Path: '',
-          Sectional: '',
-        },
-        highlightedHeaderArg: 'Profiles',
-        commandName: 'Sweep',
-      })
-      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'path',
@@ -4824,19 +4743,6 @@ path001 = startProfile(sketch001, at = [0, 0])
     await test.step('Go through command bar flow', async () => {
       await toolbar.closePane('code')
       await toolbar.revolveButton.click()
-      await cmdBar.expectState({
-        stage: 'arguments',
-        currentArgKey: 'sketches',
-        currentArgValue: '',
-        headerArguments: {
-          Profiles: '',
-          AxisOrEdge: '',
-          Angle: '',
-        },
-        highlightedHeaderArg: 'Profiles',
-        commandName: 'Revolve',
-      })
-      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'axisOrEdge',

e2e/playwright/projects.spec.ts

@@ -11,7 +11,6 @@ import {
   getPlaywrightDownloadDir,
   getUtils,
   isOutOfViewInScrollContainer,
-  runningOnWindows,
 } from '@e2e/playwright/test-utils'
 import { expect, test } from '@e2e/playwright/zoo-test'
 
@@ -1980,6 +1979,7 @@ test(
   }
 )
 
+// Flaky
 test(
   'Original project name persist after onboarding',
   { tag: '@electron' },
@@ -2066,9 +2066,13 @@ test(
 )
 
 test(
-  'import from nested directory',
+  'nested dir import works on windows',
-  { tag: ['@electron', '@windows', '@macos'] },
+  { tag: ['@electron', '@windows'] },
-  async ({ scene, cmdBar, context, page }) => {
+  async ({ scene, cmdBar, context, page }, testInfo) => {
+    // Skip if on non-windows
+    if (process.platform !== 'win32') {
+      test.skip()
+    }
     await context.folderSetupFn(async (dir) => {
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
@@ -2081,9 +2085,9 @@ test(
       )
       await fsp.writeFile(
         path.join(bracketDir, 'main.kcl'),
-        runningOnWindows()
+        `import 'nested\\main.kcl' as thing
-          ? `import 'nested\\main.kcl' as thing\n\nthing`
+
-          : `import 'nested/main.kcl' as thing\n\nthing`
+thing`
       )
     })
 

e2e/playwright/sketch-tests.spec.ts

@@ -1016,7 +1016,6 @@ profile001 = startProfile(sketch001, at = [${roundOff(scale * 69.6)}, ${roundOff
 
     // sketch selection should already have been made.
     // otherwise the cmdbar would be waiting for a selection.
-    await cmdBar.progressCmdBar()
     await cmdBar.expectState({
       stage: 'arguments',
       currentArgKey: 'length',

e2e/playwright/testing-samples-loading.spec.ts

@@ -103,8 +103,6 @@ test.describe('Testing loading external models', () => {
         file: 'ball-bearing' + FILE_EXT,
         title: 'Ball Bearing',
         file1: 'ball-bearing-1' + FILE_EXT,
-        folderName: 'ball-bearing',
-        folderName1: 'ball-bearing-1',
       }
       const projectCard = page.getByRole('link', { name: 'bracket' })
       const overwriteWarning = page.getByText(
@@ -156,10 +154,8 @@ test.describe('Testing loading external models', () => {
 
       await test.step(`Ensure we made and opened a new file`, async () => {
         await editor.expectEditor.toContain('// ' + sampleOne.title)
-        await expect(
+        await expect(newlyCreatedFile(sampleOne.file)).toBeVisible()
-          page.getByTestId('file-tree-item').getByText(sampleOne.folderName)
+        await expect(projectMenuButton).toContainText(sampleOne.file)
-        ).toBeVisible()
-        await expect(projectMenuButton).toContainText('main.kcl')
       })
 
       await test.step(`Load a KCL sample with the command palette`, async () => {
@@ -173,10 +169,8 @@ test.describe('Testing loading external models', () => {
 
       await test.step(`Ensure we made and opened a new file with a unique name`, async () => {
         await editor.expectEditor.toContain('// ' + sampleOne.title)
-        await expect(
+        await expect(newlyCreatedFile(sampleOne.file1)).toBeVisible()
-          page.getByTestId('file-tree-item').getByText(sampleOne.folderName1)
+        await expect(projectMenuButton).toContainText(sampleOne.file1)
-        ).toBeVisible()
-        await expect(projectMenuButton).toContainText('main.kcl')
       })
     }
   )

e2e/playwright/text-to-cad-tests.spec.ts

@@ -984,12 +984,12 @@ test.describe('Mocked Text-to-CAD API tests', { tag: ['@skipWin'] }, () => {
       )
       await expect(page.getByTestId('app-header-file-name')).toBeVisible()
       await expect(page.getByTestId('app-header-file-name')).toContainText(
-        'main.kcl'
+        '2x2x2-cube.kcl'
       )
 
       await u.openFilePanel()
       await expect(
-        page.getByTestId('file-tree-item').getByText('2x2x2-cube')
+        page.getByTestId('file-tree-item').getByText('2x2x2-cube.kcl')
       ).toBeVisible()
     }
   )
@@ -1184,13 +1184,13 @@ test.describe('Mocked Text-to-CAD API tests', { tag: ['@skipWin'] }, () => {
       )
       await expect(page.getByTestId('app-header-file-name')).toBeVisible()
       await expect(page.getByTestId('app-header-file-name')).toContainText(
-        'main.kcl'
+        '2x2x2-cube.kcl'
       )
 
       // Check file is created
       await u.openFilePanel()
       await expect(
-        page.getByTestId('file-tree-item').getByText('2x2x2-cube')
+        page.getByTestId('file-tree-item').getByText('2x2x2-cube.kcl')
       ).toBeVisible()
     }
   )
@@ -1476,13 +1476,13 @@ test.describe('Mocked Text-to-CAD API tests', { tag: ['@skipWin'] }, () => {
       )
       await expect(page.getByTestId('app-header-file-name')).toBeVisible()
       await expect(page.getByTestId('app-header-file-name')).toContainText(
-        'main.kcl'
+        '2x2x2-cube.kcl'
       )
 
       // Check file is created
       await u.openFilePanel()
       await expect(
-        page.getByTestId('file-tree-item').getByText('2x2x2-cube')
+        page.getByTestId('file-tree-item').getByText('2x2x2-cube.kcl')
       ).toBeVisible()
       await expect(
         page.getByTestId('file-tree-item').getByText('main.kcl')

e2e/playwright/various.spec.ts

@@ -573,7 +573,6 @@ profile001 = startProfile(sketch002, at = [-12.34, 12.34])
   await expect(page.getByTestId('command-bar')).toBeVisible()
   await page.waitForTimeout(100)
 
-  await cmdBar.progressCmdBar()
   await cmdBar.progressCmdBar()
   await expect(page.getByText('Confirm Extrude')).toBeVisible()
   await cmdBar.progressCmdBar()

public/kcl-samples/prosthetic-hip/main.kcl

@@ -33,9 +33,14 @@ stemLoftProfile2 = startSketchOn(offsetPlane(XY, offset = 75))
 // Draw the third profile for the lofted femur
 p3Z = 110
 p3A = 25
+plane003 = {
+  origin = [0, 0.0, p3Z],
+  xAxis = [cos(p3A), 0, sin(p3A)],
+  yAxis = [0.0, 1.0, 0.0]
+}
 l3 = 32
 r3 = 4
-stemLoftProfile3 = startSketchOn(XY)
+stemLoftProfile3 = startSketchOn(plane003)
   |> startProfile(at = [-15.5, -l3 / 2])
   |> yLine(length = l3, tag = $seg03)
   |> tangentialArc(angle = -120, radius = r3)
@@ -44,14 +49,18 @@ stemLoftProfile3 = startSketchOn(XY)
   |> angledLine(angle = 30, length = -segLen(seg03))
   |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-  |> translate(z = p3Z)
+
-  |> rotate(pitch = -p3A)
 // Draw the fourth profile for the lofted femur
 p4Z = 130
 p4A = 36.5
+plane004 = {
+  origin = [0, 0.0, p4Z],
+  xAxis = [cos(p4A), 0, sin(p4A)],
+  yAxis = [0.0, 1.0, 0.0]
+}
 l4 = 16
 r4 = 5
-stemLoftProfile4 = startSketchOn(XY)
+stemLoftProfile4 = startSketchOn(plane004)
   |> startProfile(at = [-23, -l4 / 2])
   |> yLine(length = l4, tag = $seg04)
   |> tangentialArc(angle = -120, radius = r4)
@@ -60,14 +69,18 @@ stemLoftProfile4 = startSketchOn(XY)
   |> angledLine(angle = 30, length = -segLen(seg04))
   |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-  |> translate(z = p4Z)
+
-  |> rotate(pitch = -p4A)
 // Draw the first profile for the femoral stem
 p5Z = 140
 p5A = 36.5
+plane005 = {
+  origin = [0, 0.0, p5Z],
+  xAxis = [cos(p5A), 0, sin(p5A)],
+  yAxis = [0.0, 1.0, 0.0]
+}
 l5 = 1.6
 r5 = 1.6
-stemLoftProfile5 = startSketchOn(XY)
+stemLoftProfile5 = startSketchOn(plane005)
   |> startProfile(at = [-19.5, -l5 / 2])
   |> yLine(length = l5, tag = $seg05)
   |> tangentialArc(angle = -120, radius = r5)
@@ -76,14 +89,18 @@ stemLoftProfile5 = startSketchOn(XY)
   |> angledLine(angle = 30, length = -segLen(seg05))
   |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-  |> translate(z = p5Z)
+
-  |> rotate(pitch = -p5A)
 // Draw the second profile for the femoral stem
 p6Z = 145
 p6A = 36.5
+plane006 = {
+  origin = [0, 0.0, p6Z],
+  xAxis = [cos(p6A), 0, sin(p6A)],
+  yAxis = [0.0, 1.0, 0.0]
+}
 l6 = 1
 r6 = 3
-stemLoftProfile6 = startSketchOn(XY)
+stemLoftProfile6 = startSketchOn(plane006)
   |> startProfile(at = [-23.4, -l6 / 2])
   |> yLine(length = l6, tag = $seg06)
   |> tangentialArc(angle = -120, radius = r6)
@@ -92,24 +109,27 @@ stemLoftProfile6 = startSketchOn(XY)
   |> angledLine(angle = 30, length = -segLen(seg06))
   |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-  |> translate(z = p6Z)
+
-  |> rotate(pitch = -p6A)
+// Draw the third profile for the femoral stem
+stemTab = clone(stemLoftProfile6)
+  |> extrude(%, length = 6)
+
 // Loft the femur using all profiles in sequence
+
 femur = loft([
   stemLoftProfile1,
   stemLoftProfile2,
   stemLoftProfile3,
   stemLoftProfile4
 ])
+
 // Loft the femoral stem
 femoralStem = loft([
   clone(stemLoftProfile4),
   stemLoftProfile5,
-  clone(stemLoftProfile6)
+  stemLoftProfile6
 ])
-// Draw the third profile for the femoral stem
+
-stemTab = stemLoftProfile6
-  |> extrude(length = 6)
 // Revolve a hollow socket to represent the femoral head
 femoralHead = startSketchOn(XZ)
   |> startProfile(at = [4, 0])

rust/kcl-lib/src/docs/kcl_doc.rs

@@ -631,8 +631,6 @@ impl FnData {
             return "clone(${0:part001})".to_owned();
         } else if self.name == "hole" {
             return "hole(${0:holeSketch}, ${1:%})".to_owned();
-        } else if self.name == "circle" {
-            return "circle(center = [${0:3.14}, ${1:3.14}], diameter = ${2:3.14})".to_owned();
         }
         let mut args = Vec::new();
         let mut index = 0;

rust/kcl-lib/src/docs/mod.rs

@@ -1018,7 +1018,7 @@ mod tests {
         let snippet = circle_fn.to_autocomplete_snippet();
         assert_eq!(
             snippet,
-            r#"circle(center = [${0:3.14}, ${1:3.14}], diameter = ${2:3.14})"#
+            r#"circle(center = [${0:3.14}, ${1:3.14}], radius = ${2:3.14})"#
         );
     }
 

rust/kcl-lib/src/simulation_tests.rs

@@ -3360,29 +3360,8 @@ mod nested_windows_main_kcl {
         super::execute(TEST_NAME, true).await
     }
 }
-mod subtract_regression11 {
+mod nested_assembly {
-    const TEST_NAME: &str = "subtract_regression11";
+    const TEST_NAME: &str = "nested_assembly";
-
-    /// Test parsing KCL.
-    #[test]
-    fn parse() {
-        super::parse(TEST_NAME)
-    }
-
-    /// Test that parsing and unparsing KCL produces the original KCL input.
-    #[tokio::test(flavor = "multi_thread")]
-    async fn unparse() {
-        super::unparse(TEST_NAME).await
-    }
-
-    /// Test that KCL is executed correctly.
-    #[tokio::test(flavor = "multi_thread")]
-    async fn kcl_test_execute() {
-        super::execute(TEST_NAME, true).await
-    }
-}
-mod subtract_regression12 {
-    const TEST_NAME: &str = "subtract_regression12";
 
     /// Test parsing KCL.
     #[test]

rust/kcl-lib/src/std/shapes.rs

@@ -44,11 +44,10 @@ pub enum SketchOrSurface {
 pub async fn circle(exec_state: &mut ExecState, args: Args) -> Result<KclValue, KclError> {
     let sketch_or_surface = args.get_unlabeled_kw_arg("sketchOrSurface")?;
     let center = args.get_kw_arg_typed("center", &RuntimeType::point2d(), exec_state)?;
-    let radius: Option<TyF64> = args.get_kw_arg_opt_typed("radius", &RuntimeType::length(), exec_state)?;
+    let radius: TyF64 = args.get_kw_arg_typed("radius", &RuntimeType::length(), exec_state)?;
-    let diameter: Option<TyF64> = args.get_kw_arg_opt_typed("diameter", &RuntimeType::length(), exec_state)?;
     let tag = args.get_kw_arg_opt(NEW_TAG_KW)?;
 
-    let sketch = inner_circle(sketch_or_surface, center, radius, diameter, tag, exec_state, args).await?;
+    let sketch = inner_circle(sketch_or_surface, center, radius, tag, exec_state, args).await?;
     Ok(KclValue::Sketch {
         value: Box::new(sketch),
     })
@@ -57,8 +56,7 @@ pub async fn circle(exec_state: &mut ExecState, args: Args) -> Result<KclValue,
 async fn inner_circle(
     sketch_or_surface: SketchOrSurface,
     center: [TyF64; 2],
-    radius: Option<TyF64>,
+    radius: TyF64,
-    diameter: Option<TyF64>,
     tag: Option<TagNode>,
     exec_state: &mut ExecState,
     args: Args,
@@ -70,25 +68,6 @@ async fn inner_circle(
     let (center_u, ty) = untype_point(center.clone());
     let units = ty.expect_length();
 
-    let radius = match (radius, diameter) {
-        (Some(radius), None) => radius,
-        (None, Some(mut diameter)) => {
-            diameter.n /= 2.0;
-            diameter
-        }
-        (None, None) => {
-            return Err(KclError::Type(KclErrorDetails::new(
-                "This function needs either `diameter` or `radius`".to_string(),
-                vec![args.source_range],
-            )))
-        }
-        (Some(_), Some(_)) => {
-            return Err(KclError::Type(KclErrorDetails::new(
-                "You cannot specify both `diameter` and `radius`, please remove one".to_string(),
-                vec![args.source_range],
-            )))
-        }
-    };
     let from = [center_u[0] + radius.to_length_units(units), center_u[1]];
     let from_t = [TyF64::new(from[0], ty.clone()), TyF64::new(from[1], ty)];
 

rust/kcl-lib/std/sketch.kcl

@@ -24,7 +24,7 @@
 ///   |> line(end = [0, 30])
 ///   |> line(end = [-30, 0])
 ///   |> close()
-///   |> subtract2d(tool = circle(center = [0, 15], diameter = 10))
+///   |> subtract2d(tool = circle(center = [0, 15], radius = 5))
 ///
 /// example = extrude(exampleSketch, length = 5)
 /// ```
@@ -34,10 +34,8 @@ export fn circle(
   @sketch_or_surface: Sketch | Plane | Face,
   /// The center of the circle.
   center: Point2d,
-  /// The radius of the circle. Incompatible with `diameter`.
+  /// The radius of the circle.
-  radius?: number(Length),
+  radius: number(Length),
-  /// The diameter of the circle. Incompatible with `radius`.
-  diameter?: number(Length),
   /// Create a new tag which refers to this circle.
   tag?: tag,
 ): Sketch {}

rust/kcl-lib/tests/kcl_samples/brake-rotor/artifact_graph_flowchart.snap.md

@@ -185,20 +185,21 @@ flowchart LR
     %% face_code_ref=Missing NodePath
   86["Cap Start"]
     %% face_code_ref=Missing NodePath
-  87["Cap End"]
+  87["Cap Start"]
     %% face_code_ref=Missing NodePath
   88["Cap End"]
     %% face_code_ref=Missing NodePath
   89["Cap End"]
     %% face_code_ref=Missing NodePath
-  90["SweepEdge Opposite"]
+  90["Cap End"]
+    %% face_code_ref=Missing NodePath
   91["SweepEdge Opposite"]
   92["SweepEdge Opposite"]
   93["SweepEdge Opposite"]
   94["SweepEdge Opposite"]
   95["SweepEdge Opposite"]
   96["SweepEdge Opposite"]
-  97["SweepEdge Adjacent"]
+  97["SweepEdge Opposite"]
   98["SweepEdge Adjacent"]
   99["SweepEdge Adjacent"]
   100["SweepEdge Adjacent"]
@@ -213,14 +214,15 @@ flowchart LR
   109["SweepEdge Adjacent"]
   110["SweepEdge Adjacent"]
   111["SweepEdge Adjacent"]
-  112["EdgeCut Fillet<br>[2999, 3289, 0]"]
+  112["SweepEdge Adjacent"]
-    %% [ProgramBodyItem { index: 26 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
   113["EdgeCut Fillet<br>[2999, 3289, 0]"]
     %% [ProgramBodyItem { index: 26 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
   114["EdgeCut Fillet<br>[2999, 3289, 0]"]
     %% [ProgramBodyItem { index: 26 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
   115["EdgeCut Fillet<br>[2999, 3289, 0]"]
     %% [ProgramBodyItem { index: 26 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
+  116["EdgeCut Fillet<br>[2999, 3289, 0]"]
+    %% [ProgramBodyItem { index: 26 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
   1 --- 8
   1 --- 9
   1 --- 13
@@ -281,84 +283,84 @@ flowchart LR
   20 ---- 64
   82 --- 20
   27 --- 83
-  27 x--> 86
+  27 x--> 87
-  27 --- 96
+  27 --- 97
-  27 --- 111
+  27 --- 112
   28 --- 68
   28 x--> 85
-  28 --- 90
+  28 --- 91
-  28 --- 97
+  28 --- 98
   31 --- 70
   31 x--> 84
-  31 --- 94
+  31 --- 95
-  31 --- 101
+  31 --- 102
   32 --- 71
   32 x--> 84
-  32 --- 93
+  32 --- 94
-  32 --- 100
+  32 --- 101
   33 --- 69
   33 x--> 84
-  33 --- 92
+  33 --- 93
-  33 --- 99
+  33 --- 100
   34 --- 72
   34 x--> 84
-  34 --- 91
+  34 --- 92
-  34 --- 98
+  34 --- 99
   62 <--x 36
   36 --- 78
-  36 x--> 103
+  36 x--> 104
   62 <--x 37
   37 --- 77
-  37 --- 103
+  37 --- 104
   62 <--x 38
   38 --- 82
-  38 --- 104
+  38 --- 105
   62 <--x 39
   39 --- 79
-  39 --- 105
+  39 --- 106
   62 <--x 40
   40 --- 74
-  40 --- 106
+  40 --- 107
   62 <--x 41
   41 --- 81
-  41 --- 107
+  41 --- 108
   62 <--x 42
   42 --- 76
-  42 --- 108
+  42 --- 109
   62 <--x 43
   43 --- 75
-  43 --- 109
+  43 --- 110
   62 <--x 44
   44 --- 80
-  44 --- 110
+  44 --- 111
   45 --- 73
   45 x--> 82
-  45 --- 95
+  45 --- 96
-  45 --- 102
+  45 --- 103
   59 --- 68
   59 --- 85
-  59 --- 88
+  59 --- 89
-  59 --- 90
+  59 --- 91
-  59 --- 97
+  59 --- 98
   60 --- 83
-  60 --- 86
+  60 --- 87
-  60 --- 89
+  60 --- 90
-  60 --- 96
+  60 --- 97
-  60 --- 111
+  60 --- 112
   61 --- 69
   61 --- 70
   61 --- 71
   61 --- 72
   61 --- 84
-  61 --- 87
+  61 --- 88
-  61 --- 91
   61 --- 92
   61 --- 93
   61 --- 94
-  61 --- 98
+  61 --- 95
   61 --- 99
   61 --- 100
   61 --- 101
+  61 --- 102
   62 --- 74
   62 --- 75
   62 --- 76
@@ -368,7 +370,6 @@ flowchart LR
   62 --- 80
   62 --- 81
   62 --- 82
-  62 --- 103
   62 --- 104
   62 --- 105
   62 --- 106
@@ -376,52 +377,54 @@ flowchart LR
   62 --- 108
   62 --- 109
   62 --- 110
+  62 --- 111
   64 --- 73
-  64 --- 95
+  64 --- 86
-  64 --- 102
+  64 --- 96
-  68 --- 90
+  64 --- 103
-  68 --- 97
+  68 --- 91
-  69 --- 92
+  68 --- 98
-  69 --- 99
+  69 --- 93
-  100 <--x 69
+  69 --- 100
-  70 --- 94
+  101 <--x 69
-  98 <--x 70
+  70 --- 95
-  70 --- 101
+  99 <--x 70
-  71 --- 93
+  70 --- 102
-  71 --- 100
+  71 --- 94
-  101 <--x 71
+  71 --- 101
-  72 --- 91
+  102 <--x 71
-  72 --- 98
+  72 --- 92
-  99 <--x 72
+  72 --- 99
-  73 --- 95
+  100 <--x 72
-  73 --- 102
+  73 --- 96
-  95 <--x 74
+  73 --- 103
-  105 <--x 74
+  106 <--x 74
-  74 --- 106
+  74 --- 107
-  108 <--x 75
+  109 <--x 75
-  75 --- 109
+  75 --- 110
-  107 <--x 76
+  108 <--x 76
-  76 --- 108
+  76 --- 109
-  77 --- 103
+  77 --- 104
-  78 --- 103
+  78 --- 104
-  110 <--x 78
+  111 <--x 78
-  104 <--x 79
+  105 <--x 79
-  79 --- 105
+  79 --- 106
-  109 <--x 80
+  110 <--x 80
-  80 --- 110
+  80 --- 111
-  106 <--x 81
+  107 <--x 81
-  81 --- 107
+  81 --- 108
-  82 --- 104
+  82 --- 105
-  83 --- 96
+  83 --- 97
-  83 --- 111
+  83 --- 112
-  91 <--x 87
+  96 <--x 86
-  92 <--x 87
+  92 <--x 88
-  93 <--x 87
+  93 <--x 88
-  94 <--x 87
+  94 <--x 88
-  90 <--x 88
+  95 <--x 88
-  96 <--x 89
+  91 <--x 89
-  98 <--x 113
+  97 <--x 90
-  99 <--x 112
+  99 <--x 114
-  100 <--x 115
+  100 <--x 113
-  101 <--x 114
+  101 <--x 116
+  102 <--x 115
 ```

rust/kcl-lib/tests/kcl_samples/brake-rotor/program_memory.snap

@@ -1172,7 +1172,7 @@ description: Variables in memory after executing brake-rotor.kcl
             }
           },
           "height": -7.0,
-          "startCapId": null,
+          "startCapId": "[uuid]",
           "endCapId": null,
           "units": {
             "type": "Mm"
@@ -1606,7 +1606,7 @@ description: Variables in memory after executing brake-rotor.kcl
             }
           },
           "height": -7.0,
-          "startCapId": null,
+          "startCapId": "[uuid]",
           "endCapId": null,
           "units": {
             "type": "Mm"
@@ -2040,7 +2040,7 @@ description: Variables in memory after executing brake-rotor.kcl
             }
           },
           "height": -7.0,
-          "startCapId": null,
+          "startCapId": "[uuid]",
           "endCapId": null,
           "units": {
             "type": "Mm"
@@ -2474,7 +2474,7 @@ description: Variables in memory after executing brake-rotor.kcl
             }
           },
           "height": -7.0,
-          "startCapId": null,
+          "startCapId": "[uuid]",
           "endCapId": null,
           "units": {
             "type": "Mm"
@@ -2908,7 +2908,7 @@ description: Variables in memory after executing brake-rotor.kcl
             }
           },
           "height": -7.0,
-          "startCapId": null,
+          "startCapId": "[uuid]",
           "endCapId": null,
           "units": {
             "type": "Mm"

rust/kcl-lib/tests/kcl_samples/prosthetic-hip/artifact_commands.snap

@@ -412,12 +412,12 @@ description: Artifact commands prosthetic-hip.kcl
       "origin": {
         "x": 0.0,
         "y": 0.0,
-        "z": 0.0
+        "z": 110.0
       },
       "x_axis": {
-        "x": 1.0,
+        "x": 0.9063,
         "y": 0.0,
-        "z": 0.0
+        "z": 0.4226
       },
       "y_axis": {
         "x": 0.0,
@@ -439,9 +439,9 @@ description: Artifact commands prosthetic-hip.kcl
       "animated": false,
       "adjust_camera": false,
       "planar_normal": {
-        "x": 0.0,
+        "x": -0.4226,
         "y": 0.0,
-        "z": 1.0
+        "z": 0.9063
       }
     }
   },
@@ -458,6 +458,15 @@ description: Artifact commands prosthetic-hip.kcl
       }
     }
   },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "object_visible",
+      "object_id": "[uuid]",
+      "hidden": true
+    }
+  },
   {
     "cmdId": "[uuid]",
     "range": [],
@@ -580,54 +589,6 @@ description: Artifact commands prosthetic-hip.kcl
       "path_id": "[uuid]"
     }
   },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "set_object_transform",
-      "object_id": "[uuid]",
-      "transforms": [
-        {
-          "translate": {
-            "property": {
-              "x": 0.0,
-              "y": 0.0,
-              "z": 110.0
-            },
-            "set": false,
-            "is_local": true
-          },
-          "rotate_rpy": null,
-          "rotate_angle_axis": null,
-          "scale": null
-        }
-      ]
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "set_object_transform",
-      "object_id": "[uuid]",
-      "transforms": [
-        {
-          "translate": null,
-          "rotate_rpy": {
-            "property": {
-              "x": 0.0,
-              "y": -25.0,
-              "z": 0.0
-            },
-            "set": false,
-            "is_local": true
-          },
-          "rotate_angle_axis": null,
-          "scale": null
-        }
-      ]
-    }
-  },
   {
     "cmdId": "[uuid]",
     "range": [],
@@ -636,12 +597,12 @@ description: Artifact commands prosthetic-hip.kcl
       "origin": {
         "x": 0.0,
         "y": 0.0,
-        "z": 0.0
+        "z": 130.0
       },
       "x_axis": {
-        "x": 1.0,
+        "x": 0.8039,
         "y": 0.0,
-        "z": 0.0
+        "z": 0.5948
       },
       "y_axis": {
         "x": 0.0,
@@ -663,9 +624,9 @@ description: Artifact commands prosthetic-hip.kcl
       "animated": false,
       "adjust_camera": false,
       "planar_normal": {
-        "x": 0.0,
+        "x": -0.5948,
         "y": 0.0,
-        "z": 1.0
+        "z": 0.8039
       }
     }
   },
@@ -682,6 +643,15 @@ description: Artifact commands prosthetic-hip.kcl
       }
     }
   },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "object_visible",
+      "object_id": "[uuid]",
+      "hidden": true
+    }
+  },
   {
     "cmdId": "[uuid]",
     "range": [],
@@ -804,54 +774,6 @@ description: Artifact commands prosthetic-hip.kcl
       "path_id": "[uuid]"
     }
   },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "set_object_transform",
-      "object_id": "[uuid]",
-      "transforms": [
-        {
-          "translate": {
-            "property": {
-              "x": 0.0,
-              "y": 0.0,
-              "z": 130.0
-            },
-            "set": false,
-            "is_local": true
-          },
-          "rotate_rpy": null,
-          "rotate_angle_axis": null,
-          "scale": null
-        }
-      ]
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "set_object_transform",
-      "object_id": "[uuid]",
-      "transforms": [
-        {
-          "translate": null,
-          "rotate_rpy": {
-            "property": {
-              "x": 0.0,
-              "y": -36.5,
-              "z": 0.0
-            },
-            "set": false,
-            "is_local": true
-          },
-          "rotate_angle_axis": null,
-          "scale": null
-        }
-      ]
-    }
-  },
   {
     "cmdId": "[uuid]",
     "range": [],
@@ -860,12 +782,12 @@ description: Artifact commands prosthetic-hip.kcl
       "origin": {
         "x": 0.0,
         "y": 0.0,
-        "z": 0.0
+        "z": 140.0
       },
       "x_axis": {
-        "x": 1.0,
+        "x": 0.8039,
         "y": 0.0,
-        "z": 0.0
+        "z": 0.5948
       },
       "y_axis": {
         "x": 0.0,
@@ -887,9 +809,9 @@ description: Artifact commands prosthetic-hip.kcl
       "animated": false,
       "adjust_camera": false,
       "planar_normal": {
-        "x": 0.0,
+        "x": -0.5948,
         "y": 0.0,
-        "z": 1.0
+        "z": 0.8039
       }
     }
   },
@@ -906,6 +828,15 @@ description: Artifact commands prosthetic-hip.kcl
       }
     }
   },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "object_visible",
+      "object_id": "[uuid]",
+      "hidden": true
+    }
+  },
   {
     "cmdId": "[uuid]",
     "range": [],
@@ -1028,54 +959,6 @@ description: Artifact commands prosthetic-hip.kcl
       "path_id": "[uuid]"
     }
   },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "set_object_transform",
-      "object_id": "[uuid]",
-      "transforms": [
-        {
-          "translate": {
-            "property": {
-              "x": 0.0,
-              "y": 0.0,
-              "z": 140.0
-            },
-            "set": false,
-            "is_local": true
-          },
-          "rotate_rpy": null,
-          "rotate_angle_axis": null,
-          "scale": null
-        }
-      ]
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "set_object_transform",
-      "object_id": "[uuid]",
-      "transforms": [
-        {
-          "translate": null,
-          "rotate_rpy": {
-            "property": {
-              "x": 0.0,
-              "y": -36.5,
-              "z": 0.0
-            },
-            "set": false,
-            "is_local": true
-          },
-          "rotate_angle_axis": null,
-          "scale": null
-        }
-      ]
-    }
-  },
   {
     "cmdId": "[uuid]",
     "range": [],
@@ -1084,12 +967,12 @@ description: Artifact commands prosthetic-hip.kcl
       "origin": {
         "x": 0.0,
         "y": 0.0,
-        "z": 0.0
+        "z": 145.0
       },
       "x_axis": {
-        "x": 1.0,
+        "x": 0.8039,
         "y": 0.0,
-        "z": 0.0
+        "z": 0.5948
       },
       "y_axis": {
         "x": 0.0,
@@ -1111,9 +994,9 @@ description: Artifact commands prosthetic-hip.kcl
       "animated": false,
       "adjust_camera": false,
       "planar_normal": {
-        "x": 0.0,
+        "x": -0.5948,
         "y": 0.0,
-        "z": 1.0
+        "z": 0.8039
       }
     }
   },
@@ -1130,6 +1013,15 @@ description: Artifact commands prosthetic-hip.kcl
       }
     }
   },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "object_visible",
+      "object_id": "[uuid]",
+      "hidden": true
+    }
+  },
   {
     "cmdId": "[uuid]",
     "range": [],
@@ -1252,163 +1144,6 @@ description: Artifact commands prosthetic-hip.kcl
       "path_id": "[uuid]"
     }
   },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "set_object_transform",
-      "object_id": "[uuid]",
-      "transforms": [
-        {
-          "translate": {
-            "property": {
-              "x": 0.0,
-              "y": 0.0,
-              "z": 145.0
-            },
-            "set": false,
-            "is_local": true
-          },
-          "rotate_rpy": null,
-          "rotate_angle_axis": null,
-          "scale": null
-        }
-      ]
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "set_object_transform",
-      "object_id": "[uuid]",
-      "transforms": [
-        {
-          "translate": null,
-          "rotate_rpy": {
-            "property": {
-              "x": 0.0,
-              "y": -36.5,
-              "z": 0.0
-            },
-            "set": false,
-            "is_local": true
-          },
-          "rotate_angle_axis": null,
-          "scale": null
-        }
-      ]
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "loft",
-      "section_ids": [
-        "[uuid]",
-        "[uuid]",
-        "[uuid]",
-        "[uuid]"
-      ],
-      "v_degree": 2,
-      "bez_approximate_rational": false,
-      "base_curve_index": null,
-      "tolerance": 0.0000001
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "object_bring_to_front",
-      "object_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "solid3d_get_adjacency_info",
-      "object_id": "[uuid]",
-      "edge_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "solid3d_get_extrusion_face_info",
-      "object_id": "[uuid]",
-      "edge_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "loft",
-      "section_ids": [
-        "[uuid]",
-        "[uuid]",
-        "[uuid]"
-      ],
-      "v_degree": 2,
-      "bez_approximate_rational": false,
-      "base_curve_index": null,
-      "tolerance": 0.0000001
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "object_bring_to_front",
-      "object_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "solid3d_get_adjacency_info",
-      "object_id": "[uuid]",
-      "edge_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "solid3d_get_extrusion_face_info",
-      "object_id": "[uuid]",
-      "edge_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "entity_clone",
-      "entity_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "entity_get_all_child_uuids",
-      "entity_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "entity_get_all_child_uuids",
-      "entity_id": "[uuid]"
-    }
-  },
   {
     "cmdId": "[uuid]",
     "range": [],
@@ -1443,9 +1178,9 @@ description: Artifact commands prosthetic-hip.kcl
       "animated": false,
       "adjust_camera": false,
       "planar_normal": {
-        "x": 0.0,
+        "x": -0.5948,
         "y": 0.0,
-        "z": 1.0
+        "z": 0.8039
       }
     }
   },
@@ -1493,6 +1228,115 @@ description: Artifact commands prosthetic-hip.kcl
       "edge_id": "[uuid]"
     }
   },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "loft",
+      "section_ids": [
+        "[uuid]",
+        "[uuid]",
+        "[uuid]",
+        "[uuid]"
+      ],
+      "v_degree": 2,
+      "bez_approximate_rational": false,
+      "base_curve_index": null,
+      "tolerance": 0.0000001
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "object_bring_to_front",
+      "object_id": "[uuid]"
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "solid3d_get_adjacency_info",
+      "object_id": "[uuid]",
+      "edge_id": "[uuid]"
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "solid3d_get_extrusion_face_info",
+      "object_id": "[uuid]",
+      "edge_id": "[uuid]"
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "loft",
+      "section_ids": [
+        "[uuid]",
+        "[uuid]",
+        "[uuid]"
+      ],
+      "v_degree": 2,
+      "bez_approximate_rational": false,
+      "base_curve_index": null,
+      "tolerance": 0.0000001
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "object_bring_to_front",
+      "object_id": "[uuid]"
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "solid3d_get_adjacency_info",
+      "object_id": "[uuid]",
+      "edge_id": "[uuid]"
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "solid3d_get_extrusion_face_info",
+      "object_id": "[uuid]",
+      "edge_id": "[uuid]"
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "entity_clone",
+      "entity_id": "[uuid]"
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "entity_get_all_child_uuids",
+      "entity_id": "[uuid]"
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "entity_get_all_child_uuids",
+      "entity_id": "[uuid]"
+    }
+  },
   {
     "cmdId": "[uuid]",
     "range": [],

rust/kcl-lib/tests/kcl_samples/prosthetic-hip/artifact_graph_flowchart.snap.md

@@ -17,7 +17,7 @@ flowchart LR
       %% [ProgramBodyItem { index: 2 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 7 }]
     26["Segment<br>[676, 683, 0]"]
       %% [ProgramBodyItem { index: 2 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 8 }]
-    79[Solid2d]
+    80[Solid2d]
   end
   subgraph path12 [Path]
     12["Path<br>[816, 848, 0]"]
@@ -36,161 +36,161 @@ flowchart LR
       %% [ProgramBodyItem { index: 5 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 7 }]
     33["Segment<br>[1161, 1168, 0]"]
       %% [ProgramBodyItem { index: 5 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 8 }]
-    85[Solid2d]
-  end
-  subgraph path13 [Path]
-    13["Path<br>[1293, 1328, 0]"]
-      %% [ProgramBodyItem { index: 10 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
-    34["Segment<br>[1334, 1366, 0]"]
-      %% [ProgramBodyItem { index: 10 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 2 }]
-    35["Segment<br>[1372, 1412, 0]"]
-      %% [ProgramBodyItem { index: 10 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 3 }]
-    36["Segment<br>[1418, 1465, 0]"]
-      %% [ProgramBodyItem { index: 10 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 4 }]
-    37["Segment<br>[1471, 1511, 0]"]
-      %% [ProgramBodyItem { index: 10 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 5 }]
-    38["Segment<br>[1517, 1564, 0]"]
-      %% [ProgramBodyItem { index: 10 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 6 }]
-    39["Segment<br>[1570, 1635, 0]"]
-      %% [ProgramBodyItem { index: 10 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 7 }]
-    40["Segment<br>[1641, 1648, 0]"]
-      %% [ProgramBodyItem { index: 10 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 8 }]
-    78[Solid2d]
-  end
-  subgraph path14 [Path]
-    14["Path<br>[1825, 1858, 0]"]
-      %% [ProgramBodyItem { index: 15 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
-    41["Segment<br>[2171, 2178, 0]"]
-      %% [ProgramBodyItem { index: 15 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 8 }]
-    80[Solid2d]
-  end
-  subgraph path15 [Path]
-    15["Path<br>[2357, 2392, 0]"]
-      %% [ProgramBodyItem { index: 20 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
-    42["Segment<br>[2398, 2430, 0]"]
-      %% [ProgramBodyItem { index: 20 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 2 }]
-    43["Segment<br>[2436, 2476, 0]"]
-      %% [ProgramBodyItem { index: 20 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 3 }]
-    44["Segment<br>[2482, 2529, 0]"]
-      %% [ProgramBodyItem { index: 20 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 4 }]
-    45["Segment<br>[2535, 2575, 0]"]
-      %% [ProgramBodyItem { index: 20 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 5 }]
-    46["Segment<br>[2581, 2628, 0]"]
-      %% [ProgramBodyItem { index: 20 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 6 }]
-    47["Segment<br>[2634, 2699, 0]"]
-      %% [ProgramBodyItem { index: 20 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 7 }]
-    48["Segment<br>[2705, 2712, 0]"]
-      %% [ProgramBodyItem { index: 20 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 8 }]
     84[Solid2d]
   end
-  subgraph path16 [Path]
+  subgraph path13 [Path]
-    16["Path<br>[2888, 2923, 0]"]
+    13["Path<br>[1401, 1436, 0]"]
-      %% [ProgramBodyItem { index: 25 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
+      %% [ProgramBodyItem { index: 11 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
-    49["Segment<br>[2929, 2961, 0]"]
+    34["Segment<br>[1442, 1474, 0]"]
-      %% [ProgramBodyItem { index: 25 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 2 }]
+      %% [ProgramBodyItem { index: 11 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 2 }]
-    50["Segment<br>[2967, 3007, 0]"]
+    35["Segment<br>[1480, 1520, 0]"]
-      %% [ProgramBodyItem { index: 25 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 3 }]
+      %% [ProgramBodyItem { index: 11 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 3 }]
-    51["Segment<br>[3013, 3060, 0]"]
+    36["Segment<br>[1526, 1573, 0]"]
-      %% [ProgramBodyItem { index: 25 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 4 }]
+      %% [ProgramBodyItem { index: 11 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 4 }]
-    52["Segment<br>[3066, 3106, 0]"]
+    37["Segment<br>[1579, 1619, 0]"]
-      %% [ProgramBodyItem { index: 25 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 5 }]
+      %% [ProgramBodyItem { index: 11 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 5 }]
-    53["Segment<br>[3112, 3159, 0]"]
+    38["Segment<br>[1625, 1672, 0]"]
-      %% [ProgramBodyItem { index: 25 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 6 }]
+      %% [ProgramBodyItem { index: 11 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 6 }]
-    54["Segment<br>[3165, 3230, 0]"]
+    39["Segment<br>[1678, 1743, 0]"]
-      %% [ProgramBodyItem { index: 25 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 7 }]
+      %% [ProgramBodyItem { index: 11 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 7 }]
-    55["Segment<br>[3236, 3243, 0]"]
+    40["Segment<br>[1749, 1756, 0]"]
-      %% [ProgramBodyItem { index: 25 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 8 }]
+      %% [ProgramBodyItem { index: 11 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 8 }]
     77[Solid2d]
   end
-  subgraph path17 [Path]
+  subgraph path14 [Path]
-    17["Path<br>[3755, 3780, 0]"]
+    14["Path<br>[1992, 2025, 0]"]
+      %% [ProgramBodyItem { index: 17 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
+    41["Segment<br>[2338, 2345, 0]"]
+      %% [ProgramBodyItem { index: 17 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 8 }]
+    85[Solid2d]
+  end
+  subgraph path15 [Path]
+    15["Path<br>[2583, 2618, 0]"]
+      %% [ProgramBodyItem { index: 23 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
+    42["Segment<br>[2624, 2656, 0]"]
+      %% [ProgramBodyItem { index: 23 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 2 }]
+    43["Segment<br>[2662, 2702, 0]"]
+      %% [ProgramBodyItem { index: 23 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 3 }]
+    44["Segment<br>[2708, 2755, 0]"]
+      %% [ProgramBodyItem { index: 23 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 4 }]
+    45["Segment<br>[2761, 2801, 0]"]
+      %% [ProgramBodyItem { index: 23 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 5 }]
+    46["Segment<br>[2807, 2854, 0]"]
+      %% [ProgramBodyItem { index: 23 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 6 }]
+    47["Segment<br>[2860, 2925, 0]"]
+      %% [ProgramBodyItem { index: 23 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 7 }]
+    48["Segment<br>[2931, 2938, 0]"]
+      %% [ProgramBodyItem { index: 23 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 8 }]
+    79[Solid2d]
+  end
+  subgraph path16 [Path]
+    16["Path<br>[3173, 3208, 0]"]
       %% [ProgramBodyItem { index: 29 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
-    56["Segment<br>[3786, 3805, 0]"]
+    49["Segment<br>[3214, 3246, 0]"]
       %% [ProgramBodyItem { index: 29 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 2 }]
-    57["Segment<br>[3811, 3848, 0]"]
+    50["Segment<br>[3252, 3292, 0]"]
       %% [ProgramBodyItem { index: 29 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 3 }]
-    58["Segment<br>[3854, 3891, 0]"]
+    51["Segment<br>[3298, 3345, 0]"]
       %% [ProgramBodyItem { index: 29 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 4 }]
-    59["Segment<br>[3897, 3915, 0]"]
+    52["Segment<br>[3351, 3391, 0]"]
       %% [ProgramBodyItem { index: 29 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 5 }]
-    60["Segment<br>[3921, 3959, 0]"]
+    53["Segment<br>[3397, 3444, 0]"]
       %% [ProgramBodyItem { index: 29 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 6 }]
-    61["Segment<br>[3965, 4030, 0]"]
+    54["Segment<br>[3450, 3515, 0]"]
       %% [ProgramBodyItem { index: 29 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 7 }]
-    62["Segment<br>[4036, 4043, 0]"]
+    55["Segment<br>[3521, 3528, 0]"]
       %% [ProgramBodyItem { index: 29 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 8 }]
+    78[Solid2d]
+  end
+  subgraph path17 [Path]
+    17["Path<br>[3998, 4023, 0]"]
+      %% [ProgramBodyItem { index: 33 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
+    56["Segment<br>[4029, 4048, 0]"]
+      %% [ProgramBodyItem { index: 33 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 2 }]
+    57["Segment<br>[4054, 4091, 0]"]
+      %% [ProgramBodyItem { index: 33 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 3 }]
+    58["Segment<br>[4097, 4134, 0]"]
+      %% [ProgramBodyItem { index: 33 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 4 }]
+    59["Segment<br>[4140, 4158, 0]"]
+      %% [ProgramBodyItem { index: 33 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 5 }]
+    60["Segment<br>[4164, 4202, 0]"]
+      %% [ProgramBodyItem { index: 33 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 6 }]
+    61["Segment<br>[4208, 4273, 0]"]
+      %% [ProgramBodyItem { index: 33 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 7 }]
+    62["Segment<br>[4279, 4286, 0]"]
+      %% [ProgramBodyItem { index: 33 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 8 }]
     81[Solid2d]
   end
   subgraph path18 [Path]
-    18["Path<br>[4272, 4300, 0]"]
+    18["Path<br>[4515, 4543, 0]"]
-      %% [ProgramBodyItem { index: 30 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
+      %% [ProgramBodyItem { index: 34 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
-    63["Segment<br>[4306, 4325, 0]"]
+    63["Segment<br>[4549, 4568, 0]"]
-      %% [ProgramBodyItem { index: 30 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 2 }]
+      %% [ProgramBodyItem { index: 34 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 2 }]
-    64["Segment<br>[4331, 4349, 0]"]
+    64["Segment<br>[4574, 4592, 0]"]
-      %% [ProgramBodyItem { index: 30 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 3 }]
+      %% [ProgramBodyItem { index: 34 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 3 }]
-    65["Segment<br>[4355, 4396, 0]"]
+    65["Segment<br>[4598, 4639, 0]"]
-      %% [ProgramBodyItem { index: 30 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 4 }]
+      %% [ProgramBodyItem { index: 34 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 4 }]
-    66["Segment<br>[4402, 4423, 0]"]
+    66["Segment<br>[4645, 4666, 0]"]
-      %% [ProgramBodyItem { index: 30 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 5 }]
+      %% [ProgramBodyItem { index: 34 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 5 }]
-    67["Segment<br>[4429, 4449, 0]"]
+    67["Segment<br>[4672, 4692, 0]"]
-      %% [ProgramBodyItem { index: 30 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 6 }]
+      %% [ProgramBodyItem { index: 34 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 6 }]
-    68["Segment<br>[4455, 4520, 0]"]
+    68["Segment<br>[4698, 4763, 0]"]
-      %% [ProgramBodyItem { index: 30 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 7 }]
+      %% [ProgramBodyItem { index: 34 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 7 }]
-    69["Segment<br>[4526, 4533, 0]"]
+    69["Segment<br>[4769, 4776, 0]"]
-      %% [ProgramBodyItem { index: 30 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 8 }]
+      %% [ProgramBodyItem { index: 34 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 8 }]
     82[Solid2d]
   end
   subgraph path19 [Path]
-    19["Path<br>[4756, 4786, 0]"]
+    19["Path<br>[4999, 5029, 0]"]
-      %% [ProgramBodyItem { index: 31 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
+      %% [ProgramBodyItem { index: 35 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
-    70["Segment<br>[4792, 4809, 0]"]
+    70["Segment<br>[5035, 5052, 0]"]
-      %% [ProgramBodyItem { index: 31 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 2 }]
+      %% [ProgramBodyItem { index: 35 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 2 }]
-    71["Segment<br>[4815, 4833, 0]"]
+    71["Segment<br>[5058, 5076, 0]"]
-      %% [ProgramBodyItem { index: 31 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 3 }]
+      %% [ProgramBodyItem { index: 35 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 3 }]
-    72["Segment<br>[4839, 4877, 0]"]
+    72["Segment<br>[5082, 5120, 0]"]
-      %% [ProgramBodyItem { index: 31 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 4 }]
+      %% [ProgramBodyItem { index: 35 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 4 }]
-    73["Segment<br>[4883, 4909, 0]"]
+    73["Segment<br>[5126, 5152, 0]"]
-      %% [ProgramBodyItem { index: 31 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 5 }]
+      %% [ProgramBodyItem { index: 35 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 5 }]
-    74["Segment<br>[4915, 4934, 0]"]
+    74["Segment<br>[5158, 5177, 0]"]
-      %% [ProgramBodyItem { index: 31 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 6 }]
+      %% [ProgramBodyItem { index: 35 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 6 }]
-    75["Segment<br>[4940, 5005, 0]"]
+    75["Segment<br>[5183, 5248, 0]"]
-      %% [ProgramBodyItem { index: 31 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 7 }]
+      %% [ProgramBodyItem { index: 35 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 7 }]
-    76["Segment<br>[5011, 5018, 0]"]
+    76["Segment<br>[5254, 5261, 0]"]
-      %% [ProgramBodyItem { index: 31 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 8 }]
+      %% [ProgramBodyItem { index: 35 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 8 }]
     83[Solid2d]
   end
   1["Plane<br>[308, 325, 0]"]
     %% [ProgramBodyItem { index: 2 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
   2["Plane<br>[781, 809, 0]"]
     %% [ProgramBodyItem { index: 5 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }, CallKwUnlabeledArg]
-  3["Plane<br>[1270, 1287, 0]"]
+  3["Plane<br>[1372, 1395, 0]"]
-    %% [ProgramBodyItem { index: 10 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
+    %% [ProgramBodyItem { index: 11 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
-  4["Plane<br>[1802, 1819, 0]"]
+  4["Plane<br>[1963, 1986, 0]"]
-    %% [ProgramBodyItem { index: 15 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
+    %% [ProgramBodyItem { index: 17 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
-  5["Plane<br>[2334, 2351, 0]"]
+  5["Plane<br>[2554, 2577, 0]"]
-    %% [ProgramBodyItem { index: 20 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
+    %% [ProgramBodyItem { index: 23 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
-  6["Plane<br>[2865, 2882, 0]"]
+  6["Plane<br>[3144, 3167, 0]"]
-    %% [ProgramBodyItem { index: 25 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
-  7["Plane<br>[3732, 3749, 0]"]
     %% [ProgramBodyItem { index: 29 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
-  8["Plane<br>[4249, 4266, 0]"]
+  7["Plane<br>[3975, 3992, 0]"]
-    %% [ProgramBodyItem { index: 30 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
+    %% [ProgramBodyItem { index: 33 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
-  9["Plane<br>[4733, 4750, 0]"]
+  8["Plane<br>[4492, 4509, 0]"]
-    %% [ProgramBodyItem { index: 31 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
+    %% [ProgramBodyItem { index: 34 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
+  9["Plane<br>[4976, 4993, 0]"]
+    %% [ProgramBodyItem { index: 35 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
   10["StartSketchOnPlane<br>[767, 810, 0]"]
     %% [ProgramBodyItem { index: 5 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
-  86["Sweep Loft<br>[3351, 3439, 0]"]
+  86["Sweep Extrusion<br>[3616, 3638, 0]"]
-    %% [ProgramBodyItem { index: 26 }, VariableDeclarationDeclaration, VariableDeclarationInit]
+    %% [ProgramBodyItem { index: 30 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
-  87["Sweep Loft<br>[3479, 3561, 0]"]
+  87["Sweep Loft<br>[3698, 3786, 0]"]
-    %% [ProgramBodyItem { index: 27 }, VariableDeclarationDeclaration, VariableDeclarationInit]
+    %% [ProgramBodyItem { index: 31 }, VariableDeclarationDeclaration, VariableDeclarationInit]
-  88["Sweep Extrusion<br>[3641, 3660, 0]"]
+  88["Sweep Loft<br>[3827, 3902, 0]"]
-    %% [ProgramBodyItem { index: 28 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
+    %% [ProgramBodyItem { index: 32 }, VariableDeclarationDeclaration, VariableDeclarationInit]
-  89["Sweep Revolve<br>[4049, 4079, 0]"]
+  89["Sweep Revolve<br>[4292, 4322, 0]"]
-    %% [ProgramBodyItem { index: 29 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 9 }]
+    %% [ProgramBodyItem { index: 33 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 9 }]
-  90["Sweep Revolve<br>[4539, 4569, 0]"]
+  90["Sweep Revolve<br>[4782, 4812, 0]"]
-    %% [ProgramBodyItem { index: 30 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 9 }]
+    %% [ProgramBodyItem { index: 34 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 9 }]
-  91["Sweep Revolve<br>[5024, 5054, 0]"]
+  91["Sweep Revolve<br>[5267, 5297, 0]"]
-    %% [ProgramBodyItem { index: 31 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 9 }]
+    %% [ProgramBodyItem { index: 35 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 9 }]
   92[Wall]
     %% face_code_ref=Missing NodePath
   93[Wall]
@@ -239,38 +239,30 @@ flowchart LR
     %% face_code_ref=Missing NodePath
   115[Wall]
     %% face_code_ref=Missing NodePath
-  116[Wall]
+  116["Cap Start"]
     %% face_code_ref=Missing NodePath
-  117[Wall]
+  117["Cap End"]
     %% face_code_ref=Missing NodePath
-  118[Wall]
+  118["SweepEdge Opposite"]
-    %% face_code_ref=Missing NodePath
+  119["SweepEdge Opposite"]
-  119[Wall]
+  120["SweepEdge Opposite"]
-    %% face_code_ref=Missing NodePath
+  121["SweepEdge Opposite"]
-  120[Wall]
+  122["SweepEdge Opposite"]
-    %% face_code_ref=Missing NodePath
+  123["SweepEdge Opposite"]
-  121[Wall]
+  124["SweepEdge Adjacent"]
-    %% face_code_ref=Missing NodePath
+  125["SweepEdge Adjacent"]
-  122["Cap Start"]
+  126["SweepEdge Adjacent"]
-    %% face_code_ref=Missing NodePath
+  127["SweepEdge Adjacent"]
-  123["Cap Start"]
+  128["SweepEdge Adjacent"]
-    %% face_code_ref=Missing NodePath
+  129["SweepEdge Adjacent"]
-  124["Cap End"]
+  130["SweepEdge Adjacent"]
-    %% face_code_ref=Missing NodePath
+  131["SweepEdge Adjacent"]
-  125["Cap End"]
+  132["SweepEdge Adjacent"]
-    %% face_code_ref=Missing NodePath
+  133["SweepEdge Adjacent"]
-  126["SweepEdge Opposite"]
+  134["SweepEdge Adjacent"]
-  127["SweepEdge Opposite"]
+  135["SweepEdge Adjacent"]
-  128["SweepEdge Opposite"]
+  136["SweepEdge Adjacent"]
-  129["SweepEdge Opposite"]
+  137["SweepEdge Adjacent"]
-  130["SweepEdge Opposite"]
-  131["SweepEdge Opposite"]
-  132["SweepEdge Opposite"]
-  133["SweepEdge Opposite"]
-  134["SweepEdge Opposite"]
-  135["SweepEdge Opposite"]
-  136["SweepEdge Opposite"]
-  137["SweepEdge Opposite"]
   138["SweepEdge Adjacent"]
   139["SweepEdge Adjacent"]
   140["SweepEdge Adjacent"]
@@ -280,26 +272,6 @@ flowchart LR
   144["SweepEdge Adjacent"]
   145["SweepEdge Adjacent"]
   146["SweepEdge Adjacent"]
-  147["SweepEdge Adjacent"]
-  148["SweepEdge Adjacent"]
-  149["SweepEdge Adjacent"]
-  150["SweepEdge Adjacent"]
-  151["SweepEdge Adjacent"]
-  152["SweepEdge Adjacent"]
-  153["SweepEdge Adjacent"]
-  154["SweepEdge Adjacent"]
-  155["SweepEdge Adjacent"]
-  156["SweepEdge Adjacent"]
-  157["SweepEdge Adjacent"]
-  158["SweepEdge Adjacent"]
-  159["SweepEdge Adjacent"]
-  160["SweepEdge Adjacent"]
-  161["SweepEdge Adjacent"]
-  162["SweepEdge Adjacent"]
-  163["SweepEdge Adjacent"]
-  164["SweepEdge Adjacent"]
-  165["SweepEdge Adjacent"]
-  166["SweepEdge Adjacent"]
   1 --- 11
   2 <--x 10
   2 --- 12
@@ -317,8 +289,8 @@ flowchart LR
   11 --- 24
   11 --- 25
   11 --- 26
-  11 --- 79
+  11 --- 80
-  11 ---- 86
+  11 ---- 87
   12 --- 27
   12 --- 28
   12 --- 29
@@ -326,8 +298,8 @@ flowchart LR
   12 --- 31
   12 --- 32
   12 --- 33
-  12 --- 85
+  12 --- 84
-  12 x---> 86
+  12 x---> 87
   13 --- 34
   13 --- 35
   13 --- 36
@@ -335,17 +307,17 @@ flowchart LR
   13 --- 38
   13 --- 39
   13 --- 40
-  13 --- 78
+  13 --- 77
-  13 x---> 86
+  13 x---> 87
   14 --- 41
-  14 --- 80
+  14 --- 85
-  14 x---> 86
+  14 x---> 87
-  14 x--> 132
+  14 x--> 118
-  14 x--> 133
+  14 x--> 119
-  14 x--> 134
+  14 x--> 120
-  14 x--> 135
+  14 x--> 121
-  14 x--> 136
+  14 x--> 122
-  14 x--> 137
+  14 x--> 123
   15 --- 42
   15 --- 43
   15 --- 44
@@ -353,8 +325,8 @@ flowchart LR
   15 --- 46
   15 --- 47
   15 --- 48
-  15 --- 84
+  15 --- 79
-  15 x---> 87
+  15 x---> 88
   16 --- 49
   16 --- 50
   16 --- 51
@@ -362,8 +334,8 @@ flowchart LR
   16 --- 53
   16 --- 54
   16 --- 55
-  16 --- 77
+  16 --- 78
-  16 ---- 88
+  16 x---> 88
   17 --- 56
   17 --- 57
   17 --- 58
@@ -391,263 +363,195 @@ flowchart LR
   19 --- 76
   19 --- 83
   19 ---- 91
-  20 --- 109
+  20 --- 103
-  20 x--> 122
+  20 x--> 116
-  20 --- 132
+  20 --- 118
-  20 --- 150
+  20 --- 130
-  21 --- 107
+  21 --- 101
-  21 x--> 122
+  21 x--> 116
-  21 --- 133
+  21 --- 119
-  21 --- 151
+  21 --- 131
-  22 --- 106
+  22 --- 100
-  22 x--> 122
+  22 x--> 116
-  22 --- 134
+  22 --- 120
-  22 --- 152
+  22 --- 132
-  23 --- 108
+  23 --- 102
-  23 x--> 122
+  23 x--> 116
-  23 --- 135
+  23 --- 121
-  23 --- 153
+  23 --- 133
-  24 --- 105
+  24 --- 99
-  24 x--> 122
+  24 x--> 116
-  24 --- 136
+  24 --- 122
-  24 --- 154
+  24 --- 134
-  25 --- 104
+  25 --- 98
-  25 x--> 122
+  25 x--> 116
-  25 --- 137
+  25 --- 123
-  25 --- 155
+  25 --- 135
-  49 --- 94
-  49 x--> 123
-  49 --- 131
-  49 --- 143
-  50 --- 95
-  50 x--> 123
-  50 --- 130
-  50 --- 142
-  51 --- 96
-  51 x--> 123
-  51 --- 129
-  51 --- 141
-  52 --- 97
-  52 x--> 123
-  52 --- 128
-  52 --- 140
-  53 --- 92
-  53 x--> 123
-  53 --- 127
-  53 --- 139
-  54 --- 93
-  54 x--> 123
-  54 --- 126
-  54 --- 138
   89 <--x 56
-  56 --- 115
+  56 --- 109
-  56 x--> 156
+  56 x--> 136
   89 <--x 57
-  57 --- 114
+  57 --- 108
-  57 --- 156
+  57 --- 136
   89 <--x 58
-  58 --- 110
+  58 --- 104
-  58 --- 157
+  58 --- 137
   89 <--x 59
-  59 --- 113
+  59 --- 107
-  59 --- 158
+  59 --- 138
   89 <--x 60
-  60 --- 112
+  60 --- 106
-  60 --- 159
+  60 --- 139
   89 <--x 61
-  61 --- 111
+  61 --- 105
-  61 --- 160
+  61 --- 140
   90 <--x 63
-  63 --- 102
+  63 --- 96
-  63 --- 144
+  63 --- 124
   90 <--x 64
-  64 --- 98
+  64 --- 92
-  64 --- 145
+  64 --- 125
   90 <--x 65
-  65 --- 99
+  65 --- 93
-  65 --- 146
+  65 --- 126
   90 <--x 66
-  66 --- 103
+  66 --- 97
-  66 --- 147
+  66 --- 127
   90 <--x 67
-  67 --- 101
+  67 --- 95
-  67 --- 148
+  67 --- 128
   90 <--x 68
-  68 --- 100
+  68 --- 94
-  68 --- 149
+  68 --- 129
   91 <--x 70
-  70 --- 118
+  70 --- 112
-  70 --- 161
+  70 --- 141
   91 <--x 71
-  71 --- 121
+  71 --- 115
-  71 --- 162
+  71 --- 142
   91 <--x 72
-  72 --- 120
+  72 --- 114
-  72 --- 163
+  72 --- 143
   91 <--x 73
-  73 --- 116
+  73 --- 110
-  73 --- 164
+  73 --- 144
   91 <--x 74
-  74 --- 119
+  74 --- 113
-  74 --- 165
+  74 --- 145
   91 <--x 75
-  75 --- 117
+  75 --- 111
-  75 --- 166
+  75 --- 146
-  86 --- 104
+  87 --- 98
-  86 --- 105
+  87 --- 99
-  86 --- 106
+  87 --- 100
-  86 --- 107
+  87 --- 101
-  86 --- 108
+  87 --- 102
-  86 --- 109
+  87 --- 103
-  86 --- 122
+  87 --- 116
-  86 --- 124
+  87 --- 117
-  86 --- 132
+  87 --- 118
-  86 --- 133
+  87 --- 119
-  86 --- 134
+  87 --- 120
-  86 --- 135
+  87 --- 121
-  86 --- 136
+  87 --- 122
-  86 --- 137
+  87 --- 123
-  86 --- 150
+  87 --- 130
-  86 --- 151
+  87 --- 131
-  86 --- 152
+  87 --- 132
-  86 --- 153
+  87 --- 133
-  86 --- 154
+  87 --- 134
-  86 --- 155
+  87 --- 135
-  88 --- 92
+  89 --- 104
-  88 --- 93
+  89 --- 105
-  88 --- 94
+  89 --- 106
-  88 --- 95
+  89 --- 107
-  88 --- 96
+  89 --- 108
-  88 --- 97
+  89 --- 109
-  88 --- 123
+  89 --- 136
-  88 --- 125
+  89 --- 137
-  88 --- 126
+  89 --- 138
-  88 --- 127
+  89 --- 139
-  88 --- 128
+  89 --- 140
-  88 --- 129
+  90 --- 92
-  88 --- 130
+  90 --- 93
-  88 --- 131
+  90 --- 94
-  88 --- 138
+  90 --- 95
-  88 --- 139
+  90 --- 96
-  88 --- 140
+  90 --- 97
-  88 --- 141
+  90 --- 124
-  88 --- 142
+  90 --- 125
-  88 --- 143
+  90 --- 126
-  89 --- 110
+  90 --- 127
-  89 --- 111
+  90 --- 128
-  89 --- 112
+  90 --- 129
-  89 --- 113
+  91 --- 110
-  89 --- 114
+  91 --- 111
-  89 --- 115
+  91 --- 112
-  89 --- 156
+  91 --- 113
-  89 --- 157
+  91 --- 114
-  89 --- 158
+  91 --- 115
-  89 --- 159
+  91 --- 141
-  89 --- 160
+  91 --- 142
-  90 --- 98
+  91 --- 143
-  90 --- 99
+  91 --- 144
-  90 --- 100
+  91 --- 145
-  90 --- 101
+  91 --- 146
-  90 --- 102
+  124 <--x 92
-  90 --- 103
+  92 --- 125
-  90 --- 144
+  125 <--x 93
-  90 --- 145
-  90 --- 146
-  90 --- 147
-  90 --- 148
-  90 --- 149
-  91 --- 116
-  91 --- 117
-  91 --- 118
-  91 --- 119
-  91 --- 120
-  91 --- 121
-  91 --- 161
-  91 --- 162
-  91 --- 163
-  91 --- 164
-  91 --- 165
-  91 --- 166
-  92 --- 127
-  92 --- 139
-  140 <--x 92
   93 --- 126
-  93 --- 138
+  128 <--x 94
-  139 <--x 93
+  94 --- 129
-  94 --- 131
+  127 <--x 95
-  138 <--x 94
+  95 --- 128
-  94 --- 143
+  96 --- 124
-  95 --- 130
+  129 <--x 96
-  95 --- 142
+  126 <--x 97
-  143 <--x 95
+  97 --- 127
-  96 --- 129
+  98 --- 123
-  96 --- 141
+  130 <--x 98
-  142 <--x 96
+  98 --- 135
-  97 --- 128
+  99 --- 122
-  97 --- 140
+  99 --- 134
-  141 <--x 97
+  135 <--x 99
-  144 <--x 98
+  100 --- 120
-  98 --- 145
+  100 --- 132
-  145 <--x 99
+  133 <--x 100
-  99 --- 146
+  101 --- 119
-  148 <--x 100
+  101 --- 131
-  100 --- 149
+  132 <--x 101
-  147 <--x 101
+  102 --- 121
-  101 --- 148
+  102 --- 133
-  102 --- 144
+  134 <--x 102
-  149 <--x 102
+  103 --- 118
-  146 <--x 103
+  103 --- 130
-  103 --- 147
+  131 <--x 103
   104 --- 137
-  150 <--x 104
+  139 <--x 105
-  104 --- 155
+  105 --- 140
-  105 --- 136
+  138 <--x 106
-  105 --- 154
+  106 --- 139
-  155 <--x 105
+  137 <--x 107
-  106 --- 134
+  107 --- 138
-  106 --- 152
+  108 --- 136
-  153 <--x 106
+  109 --- 136
-  107 --- 133
+  140 <--x 109
-  107 --- 151
+  143 <--x 110
-  152 <--x 107
+  110 --- 144
-  108 --- 135
+  145 <--x 111
-  108 --- 153
+  111 --- 146
-  154 <--x 108
+  112 --- 141
-  109 --- 132
+  146 <--x 112
-  109 --- 150
+  144 <--x 113
-  151 <--x 109
+  113 --- 145
-  110 --- 157
+  142 <--x 114
-  159 <--x 111
+  114 --- 143
-  111 --- 160
+  141 <--x 115
-  158 <--x 112
+  115 --- 142
-  112 --- 159
+  118 <--x 117
-  157 <--x 113
+  119 <--x 117
-  113 --- 158
+  120 <--x 117
-  114 --- 156
+  121 <--x 117
-  115 --- 156
+  122 <--x 117
-  160 <--x 115
+  123 <--x 117
-  163 <--x 116
-  116 --- 164
-  165 <--x 117
-  117 --- 166
-  118 --- 161
-  166 <--x 118
-  164 <--x 119
-  119 --- 165
-  162 <--x 120
-  120 --- 163
-  161 <--x 121
-  121 --- 162
-  132 <--x 124
-  133 <--x 124
-  134 <--x 124
-  135 <--x 124
-  136 <--x 124
-  137 <--x 124
-  126 <--x 125
-  127 <--x 125
-  128 <--x 125
-  129 <--x 125
-  130 <--x 125
-  131 <--x 125
 ```

rust/kcl-lib/tests/kcl_samples/prosthetic-hip/ops.snap

@@ -64,131 +64,538 @@ description: Operations executed prosthetic-hip.kcl
     "name": "startSketchOn",
     "unlabeledArg": {
       "value": {
-        "type": "Plane",
+        "type": "Object",
-        "artifact_id": "[uuid]"
-      },
-      "sourceRange": []
-    },
-    "labeledArgs": {},
-    "sourceRange": []
-  },
-  {
-    "type": "StdLibCall",
-    "name": "startSketchOn",
-    "unlabeledArg": {
-      "value": {
-        "type": "Plane",
-        "artifact_id": "[uuid]"
-      },
-      "sourceRange": []
-    },
-    "labeledArgs": {},
-    "sourceRange": []
-  },
-  {
-    "type": "StdLibCall",
-    "name": "startSketchOn",
-    "unlabeledArg": {
-      "value": {
-        "type": "Plane",
-        "artifact_id": "[uuid]"
-      },
-      "sourceRange": []
-    },
-    "labeledArgs": {},
-    "sourceRange": []
-  },
-  {
-    "type": "StdLibCall",
-    "name": "startSketchOn",
-    "unlabeledArg": {
-      "value": {
-        "type": "Plane",
-        "artifact_id": "[uuid]"
-      },
-      "sourceRange": []
-    },
-    "labeledArgs": {},
-    "sourceRange": []
-  },
-  {
-    "type": "StdLibCall",
-    "name": "loft",
-    "unlabeledArg": {
-      "value": {
-        "type": "Array",
-        "value": [
-          {
-            "type": "Sketch",
-            "value": {
-              "artifactId": "[uuid]"
-            }
-          },
-          {
-            "type": "Sketch",
-            "value": {
-              "artifactId": "[uuid]"
-            }
-          },
-          {
-            "type": "Sketch",
-            "value": {
-              "artifactId": "[uuid]"
-            }
-          },
-          {
-            "type": "Sketch",
-            "value": {
-              "artifactId": "[uuid]"
-            }
-          }
-        ]
-      },
-      "sourceRange": []
-    },
-    "labeledArgs": {},
-    "sourceRange": []
-  },
-  {
-    "type": "StdLibCall",
-    "name": "loft",
-    "unlabeledArg": {
-      "value": {
-        "type": "Array",
-        "value": [
-          {
-            "type": "Sketch",
-            "value": {
-              "artifactId": "[uuid]"
-            }
-          },
-          {
-            "type": "Sketch",
-            "value": {
-              "artifactId": "[uuid]"
-            }
-          },
-          {
-            "type": "Sketch",
-            "value": {
-              "artifactId": "[uuid]"
-            }
-          }
-        ]
-      },
-      "sourceRange": []
-    },
-    "labeledArgs": {},
-    "sourceRange": []
-  },
-  {
-    "type": "StdLibCall",
-    "name": "clone",
-    "unlabeledArg": {
-      "value": {
-        "type": "Sketch",
         "value": {
-          "artifactId": "[uuid]"
+          "origin": {
+            "type": "Array",
+            "value": [
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 110.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              }
+            ]
+          },
+          "xAxis": {
+            "type": "Array",
+            "value": [
+              {
+                "type": "Number",
+                "value": 0.9063077870366499,
+                "ty": {
+                  "type": "Known",
+                  "type": "Count"
+                }
+              },
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 0.42261826174069944,
+                "ty": {
+                  "type": "Known",
+                  "type": "Count"
+                }
+              }
+            ]
+          },
+          "yAxis": {
+            "type": "Array",
+            "value": [
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 1.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              }
+            ]
+          }
+        }
+      },
+      "sourceRange": []
+    },
+    "labeledArgs": {},
+    "sourceRange": []
+  },
+  {
+    "type": "StdLibCall",
+    "name": "startSketchOn",
+    "unlabeledArg": {
+      "value": {
+        "type": "Object",
+        "value": {
+          "origin": {
+            "type": "Array",
+            "value": [
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 130.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              }
+            ]
+          },
+          "xAxis": {
+            "type": "Array",
+            "value": [
+              {
+                "type": "Number",
+                "value": 0.8038568606172173,
+                "ty": {
+                  "type": "Known",
+                  "type": "Count"
+                }
+              },
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 0.5948227867513413,
+                "ty": {
+                  "type": "Known",
+                  "type": "Count"
+                }
+              }
+            ]
+          },
+          "yAxis": {
+            "type": "Array",
+            "value": [
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 1.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              }
+            ]
+          }
+        }
+      },
+      "sourceRange": []
+    },
+    "labeledArgs": {},
+    "sourceRange": []
+  },
+  {
+    "type": "StdLibCall",
+    "name": "startSketchOn",
+    "unlabeledArg": {
+      "value": {
+        "type": "Object",
+        "value": {
+          "origin": {
+            "type": "Array",
+            "value": [
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 140.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              }
+            ]
+          },
+          "xAxis": {
+            "type": "Array",
+            "value": [
+              {
+                "type": "Number",
+                "value": 0.8038568606172173,
+                "ty": {
+                  "type": "Known",
+                  "type": "Count"
+                }
+              },
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 0.5948227867513413,
+                "ty": {
+                  "type": "Known",
+                  "type": "Count"
+                }
+              }
+            ]
+          },
+          "yAxis": {
+            "type": "Array",
+            "value": [
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 1.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              }
+            ]
+          }
+        }
+      },
+      "sourceRange": []
+    },
+    "labeledArgs": {},
+    "sourceRange": []
+  },
+  {
+    "type": "StdLibCall",
+    "name": "startSketchOn",
+    "unlabeledArg": {
+      "value": {
+        "type": "Object",
+        "value": {
+          "origin": {
+            "type": "Array",
+            "value": [
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 145.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              }
+            ]
+          },
+          "xAxis": {
+            "type": "Array",
+            "value": [
+              {
+                "type": "Number",
+                "value": 0.8038568606172173,
+                "ty": {
+                  "type": "Known",
+                  "type": "Count"
+                }
+              },
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 0.5948227867513413,
+                "ty": {
+                  "type": "Known",
+                  "type": "Count"
+                }
+              }
+            ]
+          },
+          "yAxis": {
+            "type": "Array",
+            "value": [
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 1.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              },
+              {
+                "type": "Number",
+                "value": 0.0,
+                "ty": {
+                  "type": "Default",
+                  "len": {
+                    "type": "Mm"
+                  },
+                  "angle": {
+                    "type": "Degrees"
+                  }
+                }
+              }
+            ]
+          }
         }
       },
       "sourceRange": []
@@ -243,6 +650,91 @@ description: Operations executed prosthetic-hip.kcl
     },
     "sourceRange": []
   },
+  {
+    "type": "StdLibCall",
+    "name": "loft",
+    "unlabeledArg": {
+      "value": {
+        "type": "Array",
+        "value": [
+          {
+            "type": "Sketch",
+            "value": {
+              "artifactId": "[uuid]"
+            }
+          },
+          {
+            "type": "Sketch",
+            "value": {
+              "artifactId": "[uuid]"
+            }
+          },
+          {
+            "type": "Sketch",
+            "value": {
+              "artifactId": "[uuid]"
+            }
+          },
+          {
+            "type": "Sketch",
+            "value": {
+              "artifactId": "[uuid]"
+            }
+          }
+        ]
+      },
+      "sourceRange": []
+    },
+    "labeledArgs": {},
+    "sourceRange": []
+  },
+  {
+    "type": "StdLibCall",
+    "name": "loft",
+    "unlabeledArg": {
+      "value": {
+        "type": "Array",
+        "value": [
+          {
+            "type": "Sketch",
+            "value": {
+              "artifactId": "[uuid]"
+            }
+          },
+          {
+            "type": "Sketch",
+            "value": {
+              "artifactId": "[uuid]"
+            }
+          },
+          {
+            "type": "Sketch",
+            "value": {
+              "artifactId": "[uuid]"
+            }
+          }
+        ]
+      },
+      "sourceRange": []
+    },
+    "labeledArgs": {},
+    "sourceRange": []
+  },
+  {
+    "type": "StdLibCall",
+    "name": "clone",
+    "unlabeledArg": {
+      "value": {
+        "type": "Sketch",
+        "value": {
+          "artifactId": "[uuid]"
+        }
+      },
+      "sourceRange": []
+    },
+    "labeledArgs": {},
+    "sourceRange": []
+  },
   {
     "type": "StdLibCall",
     "name": "startSketchOn",

rust/kcl-lib/tests/kcl_samples/prosthetic-hip/program_memory.snap

@@ -556,9 +556,9 @@ description: Variables in memory after executing prosthetic-hip.kcl
               -8.0
             ],
             "tag": {
-              "commentStart": 1889,
+              "commentStart": 2056,
-              "end": 1895,
+              "end": 2062,
-              "start": 1889,
+              "start": 2056,
               "type": "TagDeclarator",
               "value": "seg04"
             },
@@ -707,17 +707,17 @@ description: Variables in memory after executing prosthetic-hip.kcl
           "origin": {
             "x": 0.0,
             "y": 0.0,
-            "z": 0.0,
+            "z": 130.0,
             "units": {
               "type": "Mm"
             }
           },
           "type": "plane",
-          "value": "XY",
+          "value": "Custom",
           "xAxis": {
-            "x": 1.0,
+            "x": 0.8038568606172174,
             "y": 0.0,
-            "z": 0.0,
+            "z": 0.5948227867513414,
             "units": {
               "type": "Unknown"
             }
@@ -1236,6 +1236,514 @@ description: Variables in memory after executing prosthetic-hip.kcl
       }
     }
   },
+  "plane003": {
+    "type": "Object",
+    "value": {
+      "origin": {
+        "type": "HomArray",
+        "value": [
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 110.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          }
+        ]
+      },
+      "xAxis": {
+        "type": "HomArray",
+        "value": [
+          {
+            "type": "Number",
+            "value": 0.9063,
+            "ty": {
+              "type": "Known",
+              "type": "Count"
+            }
+          },
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 0.4226,
+            "ty": {
+              "type": "Known",
+              "type": "Count"
+            }
+          }
+        ]
+      },
+      "yAxis": {
+        "type": "HomArray",
+        "value": [
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 1.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          }
+        ]
+      }
+    }
+  },
+  "plane004": {
+    "type": "Object",
+    "value": {
+      "origin": {
+        "type": "HomArray",
+        "value": [
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 130.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          }
+        ]
+      },
+      "xAxis": {
+        "type": "HomArray",
+        "value": [
+          {
+            "type": "Number",
+            "value": 0.8039,
+            "ty": {
+              "type": "Known",
+              "type": "Count"
+            }
+          },
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 0.5948,
+            "ty": {
+              "type": "Known",
+              "type": "Count"
+            }
+          }
+        ]
+      },
+      "yAxis": {
+        "type": "HomArray",
+        "value": [
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 1.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          }
+        ]
+      }
+    }
+  },
+  "plane005": {
+    "type": "Object",
+    "value": {
+      "origin": {
+        "type": "HomArray",
+        "value": [
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 140.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          }
+        ]
+      },
+      "xAxis": {
+        "type": "HomArray",
+        "value": [
+          {
+            "type": "Number",
+            "value": 0.8039,
+            "ty": {
+              "type": "Known",
+              "type": "Count"
+            }
+          },
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 0.5948,
+            "ty": {
+              "type": "Known",
+              "type": "Count"
+            }
+          }
+        ]
+      },
+      "yAxis": {
+        "type": "HomArray",
+        "value": [
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 1.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          }
+        ]
+      }
+    }
+  },
+  "plane006": {
+    "type": "Object",
+    "value": {
+      "origin": {
+        "type": "HomArray",
+        "value": [
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 145.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          }
+        ]
+      },
+      "xAxis": {
+        "type": "HomArray",
+        "value": [
+          {
+            "type": "Number",
+            "value": 0.8039,
+            "ty": {
+              "type": "Known",
+              "type": "Count"
+            }
+          },
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 0.5948,
+            "ty": {
+              "type": "Known",
+              "type": "Count"
+            }
+          }
+        ]
+      },
+      "yAxis": {
+        "type": "HomArray",
+        "value": [
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 1.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          },
+          {
+            "type": "Number",
+            "value": 0.0,
+            "ty": {
+              "type": "Default",
+              "len": {
+                "type": "Mm"
+              },
+              "angle": {
+                "type": "Degrees"
+              }
+            }
+          }
+        ]
+      }
+    }
+  },
   "polyethyleneInsert": {
     "type": "Solid",
     "value": {
@@ -2065,9 +2573,9 @@ description: Variables in memory after executing prosthetic-hip.kcl
             -16.0
           ],
           "tag": {
-            "commentStart": 1359,
+            "commentStart": 1467,
-            "end": 1365,
+            "end": 1473,
-            "start": 1359,
+            "start": 1467,
             "type": "TagDeclarator",
             "value": "seg03"
           },
@@ -2216,17 +2724,17 @@ description: Variables in memory after executing prosthetic-hip.kcl
         "origin": {
           "x": 0.0,
           "y": 0.0,
-          "z": 0.0,
+          "z": 110.0,
           "units": {
             "type": "Mm"
           }
         },
         "type": "plane",
-        "value": "XY",
+        "value": "Custom",
         "xAxis": {
-          "x": 1.0,
+          "x": 0.9063077870366499,
           "y": 0.0,
-          "z": 0.0,
+          "z": 0.42261826174069944,
           "units": {
             "type": "Unknown"
           }
@@ -2287,9 +2795,9 @@ description: Variables in memory after executing prosthetic-hip.kcl
             -8.0
           ],
           "tag": {
-            "commentStart": 1889,
+            "commentStart": 2056,
-            "end": 1895,
+            "end": 2062,
-            "start": 1889,
+            "start": 2056,
             "type": "TagDeclarator",
             "value": "seg04"
           },
@@ -2438,17 +2946,17 @@ description: Variables in memory after executing prosthetic-hip.kcl
         "origin": {
           "x": 0.0,
           "y": 0.0,
-          "z": 0.0,
+          "z": 130.0,
           "units": {
             "type": "Mm"
           }
         },
         "type": "plane",
-        "value": "XY",
+        "value": "Custom",
         "xAxis": {
-          "x": 1.0,
+          "x": 0.8038568606172174,
           "y": 0.0,
-          "z": 0.0,
+          "z": 0.5948227867513414,
           "units": {
             "type": "Unknown"
           }
@@ -2509,9 +3017,9 @@ description: Variables in memory after executing prosthetic-hip.kcl
             -0.8
           ],
           "tag": {
-            "commentStart": 2423,
+            "commentStart": 2649,
-            "end": 2429,
+            "end": 2655,
-            "start": 2423,
+            "start": 2649,
             "type": "TagDeclarator",
             "value": "seg05"
           },
@@ -2660,17 +3168,17 @@ description: Variables in memory after executing prosthetic-hip.kcl
         "origin": {
           "x": 0.0,
           "y": 0.0,
-          "z": 0.0,
+          "z": 140.0,
           "units": {
             "type": "Mm"
           }
         },
         "type": "plane",
-        "value": "XY",
+        "value": "Custom",
         "xAxis": {
-          "x": 1.0,
+          "x": 0.8038568606172174,
           "y": 0.0,
-          "z": 0.0,
+          "z": 0.5948227867513414,
           "units": {
             "type": "Unknown"
           }
@@ -2731,9 +3239,9 @@ description: Variables in memory after executing prosthetic-hip.kcl
             -0.5
           ],
           "tag": {
-            "commentStart": 2954,
+            "commentStart": 3239,
-            "end": 2960,
+            "end": 3245,
-            "start": 2954,
+            "start": 3239,
             "type": "TagDeclarator",
             "value": "seg06"
           },
@@ -2882,17 +3390,17 @@ description: Variables in memory after executing prosthetic-hip.kcl
         "origin": {
           "x": 0.0,
           "y": 0.0,
-          "z": 0.0,
+          "z": 145.0,
           "units": {
             "type": "Mm"
           }
         },
         "type": "plane",
-        "value": "XY",
+        "value": "Custom",
         "xAxis": {
-          "x": 1.0,
+          "x": 0.8038568606172174,
           "y": 0.0,
-          "z": 0.0,
+          "z": 0.5948227867513414,
           "units": {
             "type": "Unknown"
           }
@@ -2949,9 +3457,9 @@ description: Variables in memory after executing prosthetic-hip.kcl
           "id": "[uuid]",
           "sourceRange": [],
           "tag": {
-            "commentStart": 2954,
+            "commentStart": 3239,
-            "end": 2960,
+            "end": 3245,
-            "start": 2954,
+            "start": 3239,
             "type": "TagDeclarator",
             "value": "seg06"
           },
@@ -3007,9 +3515,9 @@ description: Variables in memory after executing prosthetic-hip.kcl
               -0.5
             ],
             "tag": {
-              "commentStart": 2954,
+              "commentStart": 3239,
-              "end": 2960,
+              "end": 3245,
-              "start": 2954,
+              "start": 3239,
               "type": "TagDeclarator",
               "value": "seg06"
             },
@@ -3158,17 +3666,17 @@ description: Variables in memory after executing prosthetic-hip.kcl
           "origin": {
             "x": 0.0,
             "y": 0.0,
-            "z": 0.0,
+            "z": 145.0,
             "units": {
               "type": "Mm"
             }
           },
           "type": "plane",
-          "value": "XY",
+          "value": "Custom",
           "xAxis": {
-            "x": 1.0,
+            "x": 0.8038568606172174,
             "y": 0.0,
-            "z": 0.0,
+            "z": 0.5948227867513414,
             "units": {
               "type": "Unknown"
             }

rust/kcl-lib/tests/nested_assembly/artifact_commands.snap

@@ -0,0 +1,184 @@
+---
+source: kcl-lib/src/simulation_tests.rs
+description: Artifact commands nested_main_kcl.kcl
+---
+[
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "edge_lines_visible",
+      "hidden": false
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "object_visible",
+      "object_id": "[uuid]",
+      "hidden": true
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "object_visible",
+      "object_id": "[uuid]",
+      "hidden": true
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "make_plane",
+      "origin": {
+        "x": 0.0,
+        "y": 0.0,
+        "z": 0.0
+      },
+      "x_axis": {
+        "x": 1.0,
+        "y": 0.0,
+        "z": 0.0
+      },
+      "y_axis": {
+        "x": 0.0,
+        "y": 1.0,
+        "z": 0.0
+      },
+      "size": 60.0,
+      "clobber": false,
+      "hide": true
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "close_path",
+      "path_id": "[uuid]"
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "enable_sketch_mode",
+      "entity_id": "[uuid]",
+      "ortho": false,
+      "animated": false,
+      "adjust_camera": false,
+      "planar_normal": {
+        "x": 0.0,
+        "y": 0.0,
+        "z": 1.0
+      }
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "extend_path",
+      "path": "[uuid]",
+      "segment": {
+        "type": "arc",
+        "center": {
+          "x": 15.0,
+          "y": 0.0
+        },
+        "radius": 5.0,
+        "start": {
+          "unit": "degrees",
+          "value": 0.0
+        },
+        "end": {
+          "unit": "degrees",
+          "value": 360.0
+        },
+        "relative": false
+      }
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "move_path_pen",
+      "path": "[uuid]",
+      "to": {
+        "x": 20.0,
+        "y": 0.0,
+        "z": 0.0
+      }
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "sketch_mode_disable"
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "start_path"
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "object_bring_to_front",
+      "object_id": "[uuid]"
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "revolve",
+      "target": "[uuid]",
+      "origin": {
+        "x": 0.0,
+        "y": 0.0,
+        "z": 0.0
+      },
+      "axis": {
+        "x": 0.0,
+        "y": 1.0,
+        "z": 0.0
+      },
+      "axis_is_2d": true,
+      "angle": {
+        "unit": "degrees",
+        "value": 360.0
+      },
+      "tolerance": 0.0000001,
+      "opposite": "None"
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "solid3d_get_adjacency_info",
+      "object_id": "[uuid]",
+      "edge_id": "[uuid]"
+    }
+  },
+  {
+    "cmdId": "[uuid]",
+    "range": [],
+    "command": {
+      "type": "solid3d_get_extrusion_face_info",
+      "object_id": "[uuid]",
+      "edge_id": "[uuid]"
+    }
+  }
+]

rust/kcl-lib/tests/nested_assembly/artifact_graph_flowchart.snap

@@ -1,6 +1,6 @@
 ---
 source: kcl-lib/src/simulation_tests.rs
-description: Artifact graph flowchart subtract_regression12.kcl
+description: Artifact graph flowchart nested_main_kcl.kcl
 extension: md
 snapshot_kind: binary
 ---

rust/kcl-lib/tests/nested_assembly/artifact_graph_flowchart.snap.md

@@ -0,0 +1,23 @@
+```mermaid
+flowchart LR
+  subgraph path2 [Path]
+    2["Path<br>[43, 81, 1]"]
+    3["Segment<br>[43, 81, 1]"]
+    4[Solid2d]
+  end
+  1["Plane<br>[18, 35, 1]"]
+  5["Sweep Revolve<br>[89, 142, 1]"]
+  6[Wall]
+    %% face_code_ref=Missing NodePath
+  7["SweepEdge Adjacent"]
+  1 --- 2
+  2 --- 3
+  2 --- 4
+  2 ---- 5
+  5 <--x 3
+  3 --- 6
+  3 --- 7
+  5 --- 6
+  5 --- 7
+  6 --- 7
+```

rust/kcl-lib/tests/nested_assembly/ast.snap

@@ -0,0 +1,73 @@
+---
+source: kcl-lib/src/simulation_tests.rs
+description: Result of parsing nested_main_kcl.kcl
+---
+{
+  "Ok": {
+    "body": [
+      {
+        "commentStart": 0,
+        "end": 0,
+        "path": {
+          "type": "Kcl",
+          "filename": "nested/foo/bar/main.kcl"
+        },
+        "selector": {
+          "type": "None",
+          "alias": {
+            "commentStart": 0,
+            "end": 0,
+            "name": "bar",
+            "start": 0,
+            "type": "Identifier"
+          }
+        },
+        "start": 0,
+        "type": "ImportStatement",
+        "type": "ImportStatement"
+      },
+      {
+        "commentStart": 0,
+        "end": 0,
+        "expression": {
+          "abs_path": false,
+          "commentStart": 0,
+          "end": 0,
+          "name": {
+            "commentStart": 0,
+            "end": 0,
+            "name": "bar",
+            "start": 0,
+            "type": "Identifier"
+          },
+          "path": [],
+          "start": 0,
+          "type": "Name",
+          "type": "Name"
+        },
+        "start": 0,
+        "type": "ExpressionStatement",
+        "type": "ExpressionStatement"
+      }
+    ],
+    "commentStart": 0,
+    "end": 0,
+    "nonCodeMeta": {
+      "nonCodeNodes": {
+        "0": [
+          {
+            "commentStart": 0,
+            "end": 0,
+            "start": 0,
+            "type": "NonCodeNode",
+            "value": {
+              "type": "newLine"
+            }
+          }
+        ]
+      },
+      "startNodes": []
+    },
+    "start": 0
+  }
+}

rust/kcl-lib/tests/nested_assembly/input.kcl

@@ -0,0 +1,3 @@
+import "nested/foo/bar/main.kcl" as bar
+
+bar

rust/kcl-lib/tests/nested_assembly/nested/foo/bar/imported.kcl

@@ -0,0 +1,7 @@
+// A donut shape.
+startSketchOn(XY)
+    |> circle( center = [15, 0], radius = 5 )
+    |> revolve(
+        angle = 360,
+        axis = Y,
+    )

rust/kcl-lib/tests/nested_assembly/nested/foo/bar/main.kcl

@@ -0,0 +1,3 @@
+import "imported.kcl" as imported
+
+imported

rust/kcl-lib/tests/nested_assembly/ops.snap

@@ -0,0 +1,18 @@
+---
+source: kcl-lib/src/simulation_tests.rs
+description: Operations executed nested_main_kcl.kcl
+---
+[
+  {
+    "type": "GroupBegin",
+    "group": {
+      "type": "ModuleInstance",
+      "name": "main.kcl",
+      "moduleId": 0
+    },
+    "sourceRange": []
+  },
+  {
+    "type": "GroupEnd"
+  }
+]

rust/kcl-lib/tests/nested_assembly/program_memory.snap

@@ -0,0 +1,10 @@
+---
+source: kcl-lib/src/simulation_tests.rs
+description: Variables in memory after executing nested_main_kcl.kcl
+---
+{
+  "bar": {
+    "type": "Module",
+    "value": 1
+  }
+}

rust/kcl-lib/tests/nested_assembly/unparsed.snap

@@ -0,0 +1,7 @@
+---
+source: kcl-lib/src/simulation_tests.rs
+description: Result of unparsing nested_main_kcl.kcl
+---
+import "nested/foo/bar/main.kcl" as bar
+
+bar

rust/kcl-lib/tests/nested_assembly/unparsed@imported.kcl.snap

@@ -0,0 +1,8 @@
+---
+source: kcl-lib/src/simulation_tests.rs
+description: Result of unparsing tests/nested_assembly/nested/foo/bar/imported.kcl
+---
+// A donut shape.
+startSketchOn(XY)
+  |> circle(center = [15, 0], radius = 5)
+  |> revolve(angle = 360, axis = Y)

rust/kcl-lib/tests/nested_assembly/unparsed@main.kcl.snap

@@ -0,0 +1,7 @@
+---
+source: kcl-lib/src/simulation_tests.rs
+description: Result of unparsing tests/nested_assembly/nested/foo/bar/main.kcl
+---
+import "imported.kcl" as imported
+
+imported

rust/kcl-lib/tests/subtract_regression11/artifact_commands.snap

@@ -1,481 +0,0 @@
----
-source: kcl-lib/src/simulation_tests.rs
-description: Artifact commands subtract_regression11.kcl
----
-[
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "edge_lines_visible",
-      "hidden": false
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "object_visible",
-      "object_id": "[uuid]",
-      "hidden": true
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "object_visible",
-      "object_id": "[uuid]",
-      "hidden": true
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "make_plane",
-      "origin": {
-        "x": 0.0,
-        "y": 0.0,
-        "z": 0.0
-      },
-      "x_axis": {
-        "x": 0.0,
-        "y": 1.0,
-        "z": 0.0
-      },
-      "y_axis": {
-        "x": 0.0,
-        "y": 0.0,
-        "z": 1.0
-      },
-      "size": 60.0,
-      "clobber": false,
-      "hide": true
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "enable_sketch_mode",
-      "entity_id": "[uuid]",
-      "ortho": false,
-      "animated": false,
-      "adjust_camera": false,
-      "planar_normal": {
-        "x": 1.0,
-        "y": 0.0,
-        "z": 0.0
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "move_path_pen",
-      "path": "[uuid]",
-      "to": {
-        "x": 0.0,
-        "y": 20.0,
-        "z": 0.0
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "sketch_mode_disable"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "start_path"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": 2.25,
-          "y": 0.0,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": 0.75,
-          "y": -0.75,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": 0.0,
-          "y": -38.5,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": -0.75,
-          "y": -0.75,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": -2.25,
-          "y": 0.0,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": 0.0,
-          "y": 40.0,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "close_path",
-      "path_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "object_bring_to_front",
-      "object_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "revolve",
-      "target": "[uuid]",
-      "origin": {
-        "x": 0.0,
-        "y": 0.0,
-        "z": 0.0
-      },
-      "axis": {
-        "x": 0.0,
-        "y": 1.0,
-        "z": 0.0
-      },
-      "axis_is_2d": true,
-      "angle": {
-        "unit": "degrees",
-        "value": 360.0
-      },
-      "tolerance": 0.0000001,
-      "opposite": "None"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "solid3d_get_adjacency_info",
-      "object_id": "[uuid]",
-      "edge_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "solid3d_get_extrusion_face_info",
-      "object_id": "[uuid]",
-      "edge_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "make_plane",
-      "origin": {
-        "x": 0.0,
-        "y": 0.0,
-        "z": 0.0
-      },
-      "x_axis": {
-        "x": 0.0,
-        "y": 1.0,
-        "z": 0.0
-      },
-      "y_axis": {
-        "x": 0.0,
-        "y": 0.0,
-        "z": 1.0
-      },
-      "size": 60.0,
-      "clobber": false,
-      "hide": true
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "enable_sketch_mode",
-      "entity_id": "[uuid]",
-      "ortho": false,
-      "animated": false,
-      "adjust_camera": false,
-      "planar_normal": {
-        "x": 1.0,
-        "y": 0.0,
-        "z": 0.0
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "move_path_pen",
-      "path": "[uuid]",
-      "to": {
-        "x": 0.65,
-        "y": 20.1,
-        "z": 0.0
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "sketch_mode_disable"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "start_path"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": 0.0,
-          "y": -1.5,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": -1.1,
-          "y": 0.0,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": 0.0,
-          "y": 1.5,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": 1.1,
-          "y": 0.0,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "close_path",
-      "path_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "enable_sketch_mode",
-      "entity_id": "[uuid]",
-      "ortho": false,
-      "animated": false,
-      "adjust_camera": false,
-      "planar_normal": {
-        "x": 1.0,
-        "y": 0.0,
-        "z": 0.0
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extrude",
-      "target": "[uuid]",
-      "distance": 10.0,
-      "faces": null,
-      "opposite": {
-        "Other": 10.0
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "object_bring_to_front",
-      "object_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "sketch_mode_disable"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "solid3d_get_adjacency_info",
-      "object_id": "[uuid]",
-      "edge_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "solid3d_get_extrusion_face_info",
-      "object_id": "[uuid]",
-      "edge_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "boolean_subtract",
-      "target_ids": [
-        "[uuid]"
-      ],
-      "tool_ids": [
-        "[uuid]"
-      ],
-      "tolerance": 0.0000001
-    }
-  }
-]

rust/kcl-lib/tests/subtract_regression11/artifact_graph_flowchart.snap

@@ -1,6 +0,0 @@
----
-source: kcl-lib/src/simulation_tests.rs
-description: Artifact graph flowchart subtract_regression11.kcl
-extension: md
-snapshot_kind: binary
----

rust/kcl-lib/tests/subtract_regression11/artifact_graph_flowchart.snap.md

@@ -1,178 +0,0 @@
-```mermaid
-flowchart LR
-  subgraph path3 [Path]
-    3["Path<br>[88, 127, 0]"]
-      %% [ProgramBodyItem { index: 1 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
-    5["Segment<br>[133, 153, 0]"]
-      %% [ProgramBodyItem { index: 1 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
-    6["Segment<br>[159, 184, 0]"]
-      %% [ProgramBodyItem { index: 1 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 2 }]
-    7["Segment<br>[190, 211, 0]"]
-      %% [ProgramBodyItem { index: 1 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 3 }]
-    8["Segment<br>[217, 243, 0]"]
-      %% [ProgramBodyItem { index: 1 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 4 }]
-    9["Segment<br>[249, 270, 0]"]
-      %% [ProgramBodyItem { index: 1 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 5 }]
-    10["Segment<br>[276, 294, 0]"]
-      %% [ProgramBodyItem { index: 1 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 6 }]
-    11["Segment<br>[300, 307, 0]"]
-      %% [ProgramBodyItem { index: 1 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 7 }]
-    18[Solid2d]
-  end
-  subgraph path4 [Path]
-    4["Path<br>[428, 470, 0]"]
-      %% [ProgramBodyItem { index: 4 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
-    12["Segment<br>[476, 496, 0]"]
-      %% [ProgramBodyItem { index: 4 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
-    13["Segment<br>[502, 522, 0]"]
-      %% [ProgramBodyItem { index: 4 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 2 }]
-    14["Segment<br>[528, 547, 0]"]
-      %% [ProgramBodyItem { index: 4 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 3 }]
-    15["Segment<br>[553, 572, 0]"]
-      %% [ProgramBodyItem { index: 4 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 4 }]
-    16["Segment<br>[578, 585, 0]"]
-      %% [ProgramBodyItem { index: 4 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 5 }]
-    17[Solid2d]
-  end
-  1["Plane<br>[47, 64, 0]"]
-    %% [ProgramBodyItem { index: 0 }, VariableDeclarationDeclaration, VariableDeclarationInit]
-  2["Plane<br>[387, 404, 0]"]
-    %% [ProgramBodyItem { index: 3 }, VariableDeclarationDeclaration, VariableDeclarationInit]
-  19["Sweep Revolve<br>[322, 373, 0]"]
-    %% [ProgramBodyItem { index: 2 }, VariableDeclarationDeclaration, VariableDeclarationInit]
-  20["Sweep Extrusion<br>[603, 672, 0]"]
-    %% [ProgramBodyItem { index: 5 }, VariableDeclarationDeclaration, VariableDeclarationInit]
-  21["CompositeSolid Subtract<br>[683, 726, 0]"]
-    %% [ProgramBodyItem { index: 6 }, VariableDeclarationDeclaration, VariableDeclarationInit]
-  22[Wall]
-    %% face_code_ref=Missing NodePath
-  23[Wall]
-    %% face_code_ref=Missing NodePath
-  24[Wall]
-    %% face_code_ref=Missing NodePath
-  25[Wall]
-    %% face_code_ref=Missing NodePath
-  26[Wall]
-    %% face_code_ref=Missing NodePath
-  27[Wall]
-    %% face_code_ref=Missing NodePath
-  28[Wall]
-    %% face_code_ref=Missing NodePath
-  29[Wall]
-    %% face_code_ref=Missing NodePath
-  30[Wall]
-    %% face_code_ref=Missing NodePath
-  31["Cap Start"]
-    %% face_code_ref=Missing NodePath
-  32["Cap End"]
-    %% face_code_ref=Missing NodePath
-  33["SweepEdge Opposite"]
-  34["SweepEdge Opposite"]
-  35["SweepEdge Opposite"]
-  36["SweepEdge Opposite"]
-  37["SweepEdge Adjacent"]
-  38["SweepEdge Adjacent"]
-  39["SweepEdge Adjacent"]
-  40["SweepEdge Adjacent"]
-  41["SweepEdge Adjacent"]
-  42["SweepEdge Adjacent"]
-  43["SweepEdge Adjacent"]
-  44["SweepEdge Adjacent"]
-  1 --- 3
-  2 --- 4
-  3 --- 5
-  3 --- 6
-  3 --- 7
-  3 --- 8
-  3 --- 9
-  3 --- 10
-  3 --- 11
-  3 --- 18
-  3 ---- 19
-  3 --- 21
-  4 --- 12
-  4 --- 13
-  4 --- 14
-  4 --- 15
-  4 --- 16
-  4 --- 17
-  4 ---- 20
-  4 --- 21
-  19 <--x 5
-  5 --- 30
-  5 --- 41
-  19 <--x 6
-  6 --- 28
-  6 --- 42
-  19 <--x 7
-  7 --- 27
-  7 --- 43
-  19 <--x 8
-  8 --- 29
-  8 --- 44
-  19 <--x 9
-  9 --- 26
-  12 --- 23
-  12 x--> 31
-  12 --- 36
-  12 --- 40
-  13 --- 25
-  13 x--> 31
-  13 --- 35
-  13 --- 39
-  14 --- 22
-  14 x--> 31
-  14 --- 34
-  14 --- 38
-  15 --- 24
-  15 x--> 31
-  15 --- 33
-  15 --- 37
-  19 --- 26
-  19 --- 27
-  19 --- 28
-  19 --- 29
-  19 --- 30
-  19 --- 41
-  19 --- 42
-  19 --- 43
-  19 --- 44
-  20 --- 22
-  20 --- 23
-  20 --- 24
-  20 --- 25
-  20 --- 31
-  20 --- 32
-  20 --- 33
-  20 --- 34
-  20 --- 35
-  20 --- 36
-  20 --- 37
-  20 --- 38
-  20 --- 39
-  20 --- 40
-  22 --- 34
-  37 <--x 22
-  22 --- 38
-  23 --- 36
-  39 <--x 23
-  23 --- 40
-  24 --- 33
-  24 --- 37
-  40 <--x 24
-  25 --- 35
-  38 <--x 25
-  25 --- 39
-  44 <--x 26
-  42 <--x 27
-  27 --- 43
-  41 <--x 28
-  28 --- 42
-  43 <--x 29
-  29 --- 44
-  30 --- 41
-  33 <--x 32
-  34 <--x 32
-  35 <--x 32
-  36 <--x 32
-```

rust/kcl-lib/tests/subtract_regression11/input.kcl

@@ -1,27 +0,0 @@
-@settings(defaultLengthUnit = mm)
-
-sketch001 = startSketchOn(YZ)
-
-sketch001Profile000 = startProfile(sketch001, at = [0.0, 20])
-  |> xLine(length = 2.25)
-  |> line(end = [0.75, -0.75])
-  |> yLine(length = -38.5)
-  |> line(end = [-0.75, -0.75])
-  |> xLine(length = -2.25)
-  |> yLine(length = 40)
-  |> close()
-
-revolve000 = revolve(sketch001Profile000, axis = Y, angle = 360)
-
-sketch003 = startSketchOn(YZ)
-
-sketch003Profile000 = startProfile(sketch003, at = [0.65, 20.1])
-  |> yLine(length = -1.5)
-  |> xLine(length = -1.1)
-  |> yLine(length = 1.5)
-  |> xLine(length = 1.1)
-  |> close()
-
-cut000Extrude = extrude([sketch003Profile000], length = 10, bidirectionalLength = 10)
-
-cut000 = subtract(revolve000, tools = cut000Extrude)

rust/kcl-lib/tests/subtract_regression11/ops.snap

@@ -1,217 +0,0 @@
----
-source: kcl-lib/src/simulation_tests.rs
-description: Operations executed subtract_regression11.kcl
----
-[
-  {
-    "type": "StdLibCall",
-    "name": "startSketchOn",
-    "unlabeledArg": {
-      "value": {
-        "type": "Plane",
-        "artifact_id": "[uuid]"
-      },
-      "sourceRange": []
-    },
-    "labeledArgs": {},
-    "sourceRange": []
-  },
-  {
-    "type": "StdLibCall",
-    "name": "revolve",
-    "unlabeledArg": {
-      "value": {
-        "type": "Array",
-        "value": [
-          {
-            "type": "Sketch",
-            "value": {
-              "artifactId": "[uuid]"
-            }
-          }
-        ]
-      },
-      "sourceRange": []
-    },
-    "labeledArgs": {
-      "angle": {
-        "value": {
-          "type": "Number",
-          "value": 360.0,
-          "ty": {
-            "type": "Default",
-            "len": {
-              "type": "Mm"
-            },
-            "angle": {
-              "type": "Degrees"
-            }
-          }
-        },
-        "sourceRange": []
-      },
-      "axis": {
-        "value": {
-          "type": "Object",
-          "value": {
-            "direction": {
-              "type": "Array",
-              "value": [
-                {
-                  "type": "Number",
-                  "value": 0.0,
-                  "ty": {
-                    "type": "Default",
-                    "len": {
-                      "type": "Mm"
-                    },
-                    "angle": {
-                      "type": "Degrees"
-                    }
-                  }
-                },
-                {
-                  "type": "Number",
-                  "value": 1.0,
-                  "ty": {
-                    "type": "Default",
-                    "len": {
-                      "type": "Mm"
-                    },
-                    "angle": {
-                      "type": "Degrees"
-                    }
-                  }
-                }
-              ]
-            },
-            "origin": {
-              "type": "Array",
-              "value": [
-                {
-                  "type": "Number",
-                  "value": 0.0,
-                  "ty": {
-                    "type": "Default",
-                    "len": {
-                      "type": "Mm"
-                    },
-                    "angle": {
-                      "type": "Degrees"
-                    }
-                  }
-                },
-                {
-                  "type": "Number",
-                  "value": 0.0,
-                  "ty": {
-                    "type": "Default",
-                    "len": {
-                      "type": "Mm"
-                    },
-                    "angle": {
-                      "type": "Degrees"
-                    }
-                  }
-                }
-              ]
-            }
-          }
-        },
-        "sourceRange": []
-      }
-    },
-    "sourceRange": []
-  },
-  {
-    "type": "StdLibCall",
-    "name": "startSketchOn",
-    "unlabeledArg": {
-      "value": {
-        "type": "Plane",
-        "artifact_id": "[uuid]"
-      },
-      "sourceRange": []
-    },
-    "labeledArgs": {},
-    "sourceRange": []
-  },
-  {
-    "type": "StdLibCall",
-    "name": "extrude",
-    "unlabeledArg": {
-      "value": {
-        "type": "Array",
-        "value": [
-          {
-            "type": "Sketch",
-            "value": {
-              "artifactId": "[uuid]"
-            }
-          }
-        ]
-      },
-      "sourceRange": []
-    },
-    "labeledArgs": {
-      "bidirectionalLength": {
-        "value": {
-          "type": "Number",
-          "value": 10.0,
-          "ty": {
-            "type": "Default",
-            "len": {
-              "type": "Mm"
-            },
-            "angle": {
-              "type": "Degrees"
-            }
-          }
-        },
-        "sourceRange": []
-      },
-      "length": {
-        "value": {
-          "type": "Number",
-          "value": 10.0,
-          "ty": {
-            "type": "Default",
-            "len": {
-              "type": "Mm"
-            },
-            "angle": {
-              "type": "Degrees"
-            }
-          }
-        },
-        "sourceRange": []
-      }
-    },
-    "sourceRange": []
-  },
-  {
-    "type": "StdLibCall",
-    "name": "subtract",
-    "unlabeledArg": {
-      "value": {
-        "type": "Solid",
-        "value": {
-          "artifactId": "[uuid]"
-        }
-      },
-      "sourceRange": []
-    },
-    "labeledArgs": {
-      "tools": {
-        "value": {
-          "type": "Solid",
-          "value": {
-            "artifactId": "[uuid]"
-          }
-        },
-        "sourceRange": []
-      }
-    },
-    "sourceRange": []
-  }
-]

rust/kcl-lib/tests/subtract_regression11/unparsed.snap

@@ -1,31 +0,0 @@
----
-source: kcl-lib/src/simulation_tests.rs
-description: Result of unparsing subtract_regression11.kcl
----
-@settings(defaultLengthUnit = mm)
-
-sketch001 = startSketchOn(YZ)
-
-sketch001Profile000 = startProfile(sketch001, at = [0.0, 20])
-  |> xLine(length = 2.25)
-  |> line(end = [0.75, -0.75])
-  |> yLine(length = -38.5)
-  |> line(end = [-0.75, -0.75])
-  |> xLine(length = -2.25)
-  |> yLine(length = 40)
-  |> close()
-
-revolve000 = revolve(sketch001Profile000, axis = Y, angle = 360)
-
-sketch003 = startSketchOn(YZ)
-
-sketch003Profile000 = startProfile(sketch003, at = [0.65, 20.1])
-  |> yLine(length = -1.5)
-  |> xLine(length = -1.1)
-  |> yLine(length = 1.5)
-  |> xLine(length = 1.1)
-  |> close()
-
-cut000Extrude = extrude([sketch003Profile000], length = 10, bidirectionalLength = 10)
-
-cut000 = subtract(revolve000, tools = cut000Extrude)

rust/kcl-lib/tests/subtract_regression12/artifact_commands.snap

@@ -1,481 +0,0 @@
----
-source: kcl-lib/src/simulation_tests.rs
-description: Artifact commands subtract_regression12.kcl
----
-[
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "edge_lines_visible",
-      "hidden": false
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "object_visible",
-      "object_id": "[uuid]",
-      "hidden": true
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "object_visible",
-      "object_id": "[uuid]",
-      "hidden": true
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "make_plane",
-      "origin": {
-        "x": 0.0,
-        "y": 0.0,
-        "z": 0.0
-      },
-      "x_axis": {
-        "x": 1.0,
-        "y": 0.0,
-        "z": 0.0
-      },
-      "y_axis": {
-        "x": 0.0,
-        "y": 1.0,
-        "z": 0.0
-      },
-      "size": 60.0,
-      "clobber": false,
-      "hide": true
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "enable_sketch_mode",
-      "entity_id": "[uuid]",
-      "ortho": false,
-      "animated": false,
-      "adjust_camera": false,
-      "planar_normal": {
-        "x": 0.0,
-        "y": 0.0,
-        "z": 1.0
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "move_path_pen",
-      "path": "[uuid]",
-      "to": {
-        "x": 5.588,
-        "y": 12.7,
-        "z": 0.0
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "sketch_mode_disable"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "start_path"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": -5.588,
-          "y": 0.0,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": 0.0,
-          "y": -25.4,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": 2.54,
-          "y": 0.0,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": 0.635,
-          "y": 2.54,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": 0.0,
-          "y": 20.0406,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": 2.413,
-          "y": 2.8194,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "close_path",
-      "path_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "object_bring_to_front",
-      "object_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "revolve",
-      "target": "[uuid]",
-      "origin": {
-        "x": 0.0,
-        "y": 0.0,
-        "z": 0.0
-      },
-      "axis": {
-        "x": 0.0,
-        "y": 1.0,
-        "z": 0.0
-      },
-      "axis_is_2d": true,
-      "angle": {
-        "unit": "degrees",
-        "value": 360.0
-      },
-      "tolerance": 0.0000001,
-      "opposite": "None"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "solid3d_get_adjacency_info",
-      "object_id": "[uuid]",
-      "edge_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "solid3d_get_extrusion_face_info",
-      "object_id": "[uuid]",
-      "edge_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "make_plane",
-      "origin": {
-        "x": 0.0,
-        "y": 0.0,
-        "z": 0.0
-      },
-      "x_axis": {
-        "x": 0.0,
-        "y": 1.0,
-        "z": 0.0
-      },
-      "y_axis": {
-        "x": 0.0,
-        "y": 0.0,
-        "z": 1.0
-      },
-      "size": 60.0,
-      "clobber": false,
-      "hide": true
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "enable_sketch_mode",
-      "entity_id": "[uuid]",
-      "ortho": false,
-      "animated": false,
-      "adjust_camera": false,
-      "planar_normal": {
-        "x": 1.0,
-        "y": 0.0,
-        "z": 0.0
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "move_path_pen",
-      "path": "[uuid]",
-      "to": {
-        "x": -15.24,
-        "y": 0.508,
-        "z": 0.0
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "sketch_mode_disable"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "start_path"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": 0.0,
-          "y": -1.016,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": 22.86,
-          "y": 0.0,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": 0.0,
-          "y": 1.016,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extend_path",
-      "path": "[uuid]",
-      "segment": {
-        "type": "line",
-        "end": {
-          "x": -22.86,
-          "y": 0.0,
-          "z": 0.0
-        },
-        "relative": true
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "close_path",
-      "path_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "enable_sketch_mode",
-      "entity_id": "[uuid]",
-      "ortho": false,
-      "animated": false,
-      "adjust_camera": false,
-      "planar_normal": {
-        "x": 1.0,
-        "y": 0.0,
-        "z": 0.0
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "extrude",
-      "target": "[uuid]",
-      "distance": 5.08,
-      "faces": null,
-      "opposite": {
-        "Other": 5.08
-      }
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "object_bring_to_front",
-      "object_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "sketch_mode_disable"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "solid3d_get_adjacency_info",
-      "object_id": "[uuid]",
-      "edge_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "solid3d_get_extrusion_face_info",
-      "object_id": "[uuid]",
-      "edge_id": "[uuid]"
-    }
-  },
-  {
-    "cmdId": "[uuid]",
-    "range": [],
-    "command": {
-      "type": "boolean_subtract",
-      "target_ids": [
-        "[uuid]"
-      ],
-      "tool_ids": [
-        "[uuid]"
-      ],
-      "tolerance": 0.0000001
-    }
-  }
-]

rust/kcl-lib/tests/subtract_regression12/artifact_graph_flowchart.snap.md

@@ -1,180 +0,0 @@
-```mermaid
-flowchart LR
-  subgraph path3 [Path]
-    3["Path<br>[88, 129, 0]"]
-      %% [ProgramBodyItem { index: 1 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
-    5["Segment<br>[135, 156, 0]"]
-      %% [ProgramBodyItem { index: 1 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
-    6["Segment<br>[162, 180, 0]"]
-      %% [ProgramBodyItem { index: 1 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 2 }]
-    7["Segment<br>[186, 205, 0]"]
-      %% [ProgramBodyItem { index: 1 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 3 }]
-    8["Segment<br>[211, 235, 0]"]
-      %% [ProgramBodyItem { index: 1 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 4 }]
-    9["Segment<br>[241, 262, 0]"]
-      %% [ProgramBodyItem { index: 1 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 5 }]
-    10["Segment<br>[268, 294, 0]"]
-      %% [ProgramBodyItem { index: 1 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 6 }]
-    11["Segment<br>[300, 307, 0]"]
-      %% [ProgramBodyItem { index: 1 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 7 }]
-    18[Solid2d]
-  end
-  subgraph path4 [Path]
-    4["Path<br>[428, 470, 0]"]
-      %% [ProgramBodyItem { index: 4 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 0 }]
-    12["Segment<br>[476, 497, 0]"]
-      %% [ProgramBodyItem { index: 4 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 1 }]
-    13["Segment<br>[503, 522, 0]"]
-      %% [ProgramBodyItem { index: 4 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 2 }]
-    14["Segment<br>[528, 548, 0]"]
-      %% [ProgramBodyItem { index: 4 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 3 }]
-    15["Segment<br>[554, 574, 0]"]
-      %% [ProgramBodyItem { index: 4 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 4 }]
-    16["Segment<br>[580, 587, 0]"]
-      %% [ProgramBodyItem { index: 4 }, VariableDeclarationDeclaration, VariableDeclarationInit, PipeBodyItem { index: 5 }]
-    17[Solid2d]
-  end
-  1["Plane<br>[47, 64, 0]"]
-    %% [ProgramBodyItem { index: 0 }, VariableDeclarationDeclaration, VariableDeclarationInit]
-  2["Plane<br>[387, 404, 0]"]
-    %% [ProgramBodyItem { index: 3 }, VariableDeclarationDeclaration, VariableDeclarationInit]
-  19["Sweep Revolve<br>[322, 373, 0]"]
-    %% [ProgramBodyItem { index: 2 }, VariableDeclarationDeclaration, VariableDeclarationInit]
-  20["Sweep Extrusion<br>[605, 676, 0]"]
-    %% [ProgramBodyItem { index: 5 }, VariableDeclarationDeclaration, VariableDeclarationInit]
-  21["CompositeSolid Subtract<br>[687, 730, 0]"]
-    %% [ProgramBodyItem { index: 6 }, VariableDeclarationDeclaration, VariableDeclarationInit]
-  22[Wall]
-    %% face_code_ref=Missing NodePath
-  23[Wall]
-    %% face_code_ref=Missing NodePath
-  24[Wall]
-    %% face_code_ref=Missing NodePath
-  25[Wall]
-    %% face_code_ref=Missing NodePath
-  26[Wall]
-    %% face_code_ref=Missing NodePath
-  27[Wall]
-    %% face_code_ref=Missing NodePath
-  28[Wall]
-    %% face_code_ref=Missing NodePath
-  29[Wall]
-    %% face_code_ref=Missing NodePath
-  30[Wall]
-    %% face_code_ref=Missing NodePath
-  31["Cap Start"]
-    %% face_code_ref=Missing NodePath
-  32["Cap End"]
-    %% face_code_ref=Missing NodePath
-  33["SweepEdge Opposite"]
-  34["SweepEdge Opposite"]
-  35["SweepEdge Opposite"]
-  36["SweepEdge Opposite"]
-  37["SweepEdge Adjacent"]
-  38["SweepEdge Adjacent"]
-  39["SweepEdge Adjacent"]
-  40["SweepEdge Adjacent"]
-  41["SweepEdge Adjacent"]
-  42["SweepEdge Adjacent"]
-  43["SweepEdge Adjacent"]
-  44["SweepEdge Adjacent"]
-  1 --- 3
-  2 --- 4
-  3 --- 5
-  3 --- 6
-  3 --- 7
-  3 --- 8
-  3 --- 9
-  3 --- 10
-  3 --- 11
-  3 --- 18
-  3 ---- 19
-  3 --- 21
-  4 --- 12
-  4 --- 13
-  4 --- 14
-  4 --- 15
-  4 --- 16
-  4 --- 17
-  4 ---- 20
-  4 --- 21
-  19 <--x 5
-  5 --- 30
-  19 <--x 7
-  7 --- 28
-  7 --- 41
-  19 <--x 8
-  8 --- 29
-  8 --- 42
-  19 <--x 9
-  9 --- 27
-  9 --- 43
-  19 <--x 10
-  10 --- 26
-  10 --- 44
-  12 --- 23
-  12 x--> 31
-  12 --- 33
-  12 --- 37
-  13 --- 25
-  13 x--> 31
-  13 --- 34
-  13 --- 38
-  14 --- 22
-  14 x--> 31
-  14 --- 35
-  14 --- 39
-  15 --- 24
-  15 x--> 31
-  15 --- 36
-  15 --- 40
-  19 --- 26
-  19 --- 27
-  19 --- 28
-  19 --- 29
-  19 --- 30
-  19 --- 41
-  19 --- 42
-  19 --- 43
-  19 --- 44
-  20 --- 22
-  20 --- 23
-  20 --- 24
-  20 --- 25
-  20 --- 31
-  20 --- 32
-  20 --- 33
-  20 --- 34
-  20 --- 35
-  20 --- 36
-  20 --- 37
-  20 --- 38
-  20 --- 39
-  20 --- 40
-  22 --- 35
-  38 <--x 22
-  22 --- 39
-  23 --- 33
-  23 --- 37
-  40 <--x 23
-  24 --- 36
-  39 <--x 24
-  24 --- 40
-  25 --- 34
-  37 <--x 25
-  25 --- 38
-  42 <--x 26
-  43 <--x 26
-  26 x--> 44
-  41 <--x 27
-  42 <--x 27
-  27 x--> 43
-  28 x--> 41
-  41 <--x 29
-  29 x--> 42
-  43 <--x 30
-  33 <--x 32
-  34 <--x 32
-  35 <--x 32
-  36 <--x 32
-```

rust/kcl-lib/tests/subtract_regression12/input.kcl

@@ -1,27 +0,0 @@
-@settings(defaultLengthUnit = in)
-
-sketch000 = startSketchOn(XY)
-
-sketch000Profile000 = startProfile(sketch000, at = [0.22, 0.5])
-  |> xLine(length = -0.22)
-  |> yLine(length = -1)
-  |> xLine(length = 0.1)
-  |> line(end = [0.025, 0.1])
-  |> yLine(length = 0.789)
-  |> line(end = [0.095, 0.111])
-  |> close()
-
-revolve000 = revolve(sketch000Profile000, axis = Y, angle = 360)
-
-sketch002 = startSketchOn(YZ)
-
-sketch002Profile000 = startProfile(sketch002, at = [-0.6, 0.02])
-  |> yLine(length = -0.04)
-  |> xLine(length = 0.9)
-  |> yLine(length = 0.04)
-  |> xLine(length = -0.9)
-  |> close()
-
-cut000Extrude = extrude([sketch002Profile000], length = 0.2, bidirectionalLength = 0.2)
-
-cut000 = subtract(revolve000, tools = cut000Extrude)

rust/kcl-lib/tests/subtract_regression12/ops.snap

@@ -1,217 +0,0 @@
----
-source: kcl-lib/src/simulation_tests.rs
-description: Operations executed subtract_regression12.kcl
----
-[
-  {
-    "type": "StdLibCall",
-    "name": "startSketchOn",
-    "unlabeledArg": {
-      "value": {
-        "type": "Plane",
-        "artifact_id": "[uuid]"
-      },
-      "sourceRange": []
-    },
-    "labeledArgs": {},
-    "sourceRange": []
-  },
-  {
-    "type": "StdLibCall",
-    "name": "revolve",
-    "unlabeledArg": {
-      "value": {
-        "type": "Array",
-        "value": [
-          {
-            "type": "Sketch",
-            "value": {
-              "artifactId": "[uuid]"
-            }
-          }
-        ]
-      },
-      "sourceRange": []
-    },
-    "labeledArgs": {
-      "angle": {
-        "value": {
-          "type": "Number",
-          "value": 360.0,
-          "ty": {
-            "type": "Default",
-            "len": {
-              "type": "Inches"
-            },
-            "angle": {
-              "type": "Degrees"
-            }
-          }
-        },
-        "sourceRange": []
-      },
-      "axis": {
-        "value": {
-          "type": "Object",
-          "value": {
-            "direction": {
-              "type": "Array",
-              "value": [
-                {
-                  "type": "Number",
-                  "value": 0.0,
-                  "ty": {
-                    "type": "Default",
-                    "len": {
-                      "type": "Mm"
-                    },
-                    "angle": {
-                      "type": "Degrees"
-                    }
-                  }
-                },
-                {
-                  "type": "Number",
-                  "value": 1.0,
-                  "ty": {
-                    "type": "Default",
-                    "len": {
-                      "type": "Mm"
-                    },
-                    "angle": {
-                      "type": "Degrees"
-                    }
-                  }
-                }
-              ]
-            },
-            "origin": {
-              "type": "Array",
-              "value": [
-                {
-                  "type": "Number",
-                  "value": 0.0,
-                  "ty": {
-                    "type": "Default",
-                    "len": {
-                      "type": "Mm"
-                    },
-                    "angle": {
-                      "type": "Degrees"
-                    }
-                  }
-                },
-                {
-                  "type": "Number",
-                  "value": 0.0,
-                  "ty": {
-                    "type": "Default",
-                    "len": {
-                      "type": "Mm"
-                    },
-                    "angle": {
-                      "type": "Degrees"
-                    }
-                  }
-                }
-              ]
-            }
-          }
-        },
-        "sourceRange": []
-      }
-    },
-    "sourceRange": []
-  },
-  {
-    "type": "StdLibCall",
-    "name": "startSketchOn",
-    "unlabeledArg": {
-      "value": {
-        "type": "Plane",
-        "artifact_id": "[uuid]"
-      },
-      "sourceRange": []
-    },
-    "labeledArgs": {},
-    "sourceRange": []
-  },
-  {
-    "type": "StdLibCall",
-    "name": "extrude",
-    "unlabeledArg": {
-      "value": {
-        "type": "Array",
-        "value": [
-          {
-            "type": "Sketch",
-            "value": {
-              "artifactId": "[uuid]"
-            }
-          }
-        ]
-      },
-      "sourceRange": []
-    },
-    "labeledArgs": {
-      "bidirectionalLength": {
-        "value": {
-          "type": "Number",
-          "value": 0.2,
-          "ty": {
-            "type": "Default",
-            "len": {
-              "type": "Inches"
-            },
-            "angle": {
-              "type": "Degrees"
-            }
-          }
-        },
-        "sourceRange": []
-      },
-      "length": {
-        "value": {
-          "type": "Number",
-          "value": 0.2,
-          "ty": {
-            "type": "Default",
-            "len": {
-              "type": "Inches"
-            },
-            "angle": {
-              "type": "Degrees"
-            }
-          }
-        },
-        "sourceRange": []
-      }
-    },
-    "sourceRange": []
-  },
-  {
-    "type": "StdLibCall",
-    "name": "subtract",
-    "unlabeledArg": {
-      "value": {
-        "type": "Solid",
-        "value": {
-          "artifactId": "[uuid]"
-        }
-      },
-      "sourceRange": []
-    },
-    "labeledArgs": {
-      "tools": {
-        "value": {
-          "type": "Solid",
-          "value": {
-            "artifactId": "[uuid]"
-          }
-        },
-        "sourceRange": []
-      }
-    },
-    "sourceRange": []
-  }
-]

rust/kcl-lib/tests/subtract_regression12/unparsed.snap

@@ -1,31 +0,0 @@
----
-source: kcl-lib/src/simulation_tests.rs
-description: Result of unparsing subtract_regression12.kcl
----
-@settings(defaultLengthUnit = in)
-
-sketch000 = startSketchOn(XY)
-
-sketch000Profile000 = startProfile(sketch000, at = [0.22, 0.5])
-  |> xLine(length = -0.22)
-  |> yLine(length = -1)
-  |> xLine(length = 0.1)
-  |> line(end = [0.025, 0.1])
-  |> yLine(length = 0.789)
-  |> line(end = [0.095, 0.111])
-  |> close()
-
-revolve000 = revolve(sketch000Profile000, axis = Y, angle = 360)
-
-sketch002 = startSketchOn(YZ)
-
-sketch002Profile000 = startProfile(sketch002, at = [-0.6, 0.02])
-  |> yLine(length = -0.04)
-  |> xLine(length = 0.9)
-  |> yLine(length = 0.04)
-  |> xLine(length = -0.9)
-  |> close()
-
-cut000Extrude = extrude([sketch002Profile000], length = 0.2, bidirectionalLength = 0.2)
-
-cut000 = subtract(revolve000, tools = cut000Extrude)

src/components/CommandBar/CommandBarSelectionInput.tsx

@@ -139,8 +139,8 @@ function CommandBarSelectionInput({
         data: {
           selectionType: 'singleCodeCursor',
         },
-      }) &&
+      })
-      setHasClearedSelection(true)
+    setHasClearedSelection(true)
   }, [arg])
 
   // Watch for outside teardowns of this component

src/components/EngineStream.tsx

@@ -406,17 +406,11 @@ export const EngineStream = (props: {
 
   // On various inputs save the camera state, in case we get disconnected.
   useEffect(() => {
-    // Only start saving after we are playing the stream (which means
-    // the scene is ready.)
-    // Also prevents us from stepping on the toes of the camera restoration.
-    if (engineStreamState.value !== EngineStreamState.Playing) return
-
     const onInput = () => {
       // Save the remote camera state to restore on stream restore.
       // Fire-and-forget because we don't know when a camera movement is
       // completed on the engine side (there are no responses to data channel
       // mouse movements.)
-
       sceneInfra.camControls.saveRemoteCameraState().catch(trap)
     }
 
@@ -432,7 +426,7 @@ export const EngineStream = (props: {
       window.document.removeEventListener('scroll', onInput)
       window.document.removeEventListener('touchend', onInput)
     }
-  }, [engineStreamState.value])
+  }, [])
 
   const isNetworkOkay =
     overallState === NetworkHealthState.Ok ||

src/components/ModelingMachineProvider.tsx

@@ -1278,12 +1278,12 @@ export const ModelingMachineProvider = ({
               )
             }
           }
-          // route to main.kcl by default for web and desktop
+          let filePath = file?.path
-          let filePath: string = PROJECT_ENTRYPOINT
+          // When prompt to edit finishes, try to route to the file they were in otherwise go to main.kcl
-          const possibleFileName = file?.path
+          if (filePath) {
-          if (possibleFileName && isDesktop()) {
+            filePath = window.electron.path.relative(basePath, filePath)
-            // When prompt to edit finishes, try to route to the file they were in otherwise go to main.kcl
+          } else {
-            filePath = window.electron.path.relative(basePath, possibleFileName)
+            filePath = PROJECT_ENTRYPOINT
           }
           return await promptToEditFlow({
             projectFiles,

src/components/OpenInDesktopAppHandler.tsx

@@ -9,11 +9,9 @@ import {
   ZOO_STUDIO_PROTOCOL,
 } from '@src/lib/constants'
 import { isDesktop } from '@src/lib/isDesktop'
-import { Themes, darkModeMatcher, setThemeClass } from '@src/lib/theme'
+import { Themes, getSystemTheme } from '@src/lib/theme'
 import toast from 'react-hot-toast'
 import { platform } from '@src/lib/utils'
-import { Logo } from '@src/components/Logo'
-import { useEffect } from 'react'
 
 /**
  * This component is a handler that checks if a certain query parameter
@@ -21,23 +19,17 @@ import { useEffect } from 'react'
  * want to open the current page in the desktop app.
  */
 export const OpenInDesktopAppHandler = (props: React.PropsWithChildren) => {
+  const theme = getSystemTheme()
   const buttonClasses =
     'bg-transparent flex-0 hover:bg-primary/10 dark:hover:bg-primary/10'
+  const pathLogomarkSvg = `${isDesktop() ? '.' : ''}/zma-logomark${
+    theme === Themes.Light ? '-dark' : ''
+  }.svg`
   const [searchParams, setSearchParams] = useSearchParams()
   // We also ignore this param on desktop, as it is redundant
   const hasAskToOpenParam =
     !isDesktop() && searchParams.has(ASK_TO_OPEN_QUERY_PARAM)
 
-  // Watch the system theme for changes
-  useEffect(() => {
-    const listener = (e: MediaQueryListEvent) => {
-      setThemeClass(e.matches ? Themes.Dark : Themes.Light)
-    }
-
-    darkModeMatcher?.addEventListener('change', listener)
-    return () => darkModeMatcher?.removeEventListener('change', listener)
-  }, [])
-
   /**
    * This function removes the query param to ask to open in desktop app
    * and then navigates to the same route but with our custom protocol
@@ -81,12 +73,17 @@ export const OpenInDesktopAppHandler = (props: React.PropsWithChildren) => {
       appear
       show={true}
       as="div"
-      className="fixed inset-0 grid p-4 place-content-center bg-chalkboard-10 dark:bg-chalkboard-110"
+      className={
+        theme +
+        ` fixed inset-0 grid p-4 place-content-center ${
+          theme === Themes.Dark ? '!bg-chalkboard-110 text-chalkboard-20' : ''
+        }`
+      }
     >
       <Transition.Child
         as="div"
-        className={`max-w-3xl py-6 px-10 flex flex-col items-center gap-12 
+        className={`max-w-3xl py-6 px-10 flex flex-col items-center gap-8 
-          mx-auto border rounded-lg shadow-lg bg-chalkboard-10 dark:bg-chalkboard-100`}
+          mx-auto border rounded-lg shadow-lg dark:bg-chalkboard-100`}
         enter="ease-out duration-300"
         enterFrom="opacity-0 scale-95"
         enterTo="opacity-100 scale-100"
@@ -95,47 +92,50 @@ export const OpenInDesktopAppHandler = (props: React.PropsWithChildren) => {
         leaveTo="opacity-0 scale-95"
         style={{ zIndex: 10 }}
       >
-        <h1 className="text-2xl text-center ">
+        <div>
-          <div className="mb-4">Launching </div>
+          <h1 className="text-2xl">
-          <div className="flex items-center gap-4 flex-wrap text-4xl">
+            Launching{' '}
-            <Logo className="w-40" aria-label="Zoo" />
+            <img
-            <span>Design Studio</span>
+              src={pathLogomarkSvg}
-          </div>
+              className="w-48"
-        </h1>
+              alt="Zoo Design Studio"
-        <div className="flex flex-col gap-4 items-center">
+            />
-          <p className="text-primary">Choose where to open this link...</p>
+          </h1>
-          <div className="flex flex-col md:flex-row items-start justify-between gap-4 xl:gap-8">
+        </div>
-            <div className="flex flex-col gap-2">
+        <p className="text-primary flex items-center gap-2">
-              <ActionButton
+          Choose where to open this link...
-                Element="button"
+        </p>
-                className={buttonClasses + ' !text-base'}
+        <div className="flex flex-col md:flex-row items-start justify-between gap-4 xl:gap-8">
-                onClick={onOpenInDesktopApp}
+          <div className="flex flex-col gap-2">
-                iconEnd={{ icon: 'arrowRight' }}
-              >
-                Open in desktop app
-              </ActionButton>
-              <ActionButton
-                Element="externalLink"
-                className={
-                  buttonClasses +
-                  ' text-sm border-transparent justify-center dark:bg-transparent'
-                }
-                to={`${VITE_KC_SITE_BASE_URL}/${APP_DOWNLOAD_PATH}`}
-                iconEnd={{ icon: 'link', bgClassName: '!bg-transparent' }}
-              >
-                Download desktop app
-              </ActionButton>
-            </div>
             <ActionButton
               Element="button"
-              className={buttonClasses + ' -order-1 !text-base'}
+              className={buttonClasses + ' !text-base'}
-              onClick={continueToWebApp}
+              onClick={onOpenInDesktopApp}
-              iconStart={{ icon: 'arrowLeft' }}
+              iconEnd={{ icon: 'arrowRight' }}
-              data-testid="continue-to-web-app-button"
             >
-              Continue to web app
+              Open in desktop app
+            </ActionButton>
+            <ActionButton
+              Element="externalLink"
+              className={
+                buttonClasses +
+                ' text-sm border-transparent justify-center dark:bg-transparent'
+              }
+              to={`${VITE_KC_SITE_BASE_URL}/${APP_DOWNLOAD_PATH}`}
+              iconEnd={{ icon: 'link', bgClassName: '!bg-transparent' }}
+            >
+              Download desktop app
             </ActionButton>
           </div>
+          <ActionButton
+            Element="button"
+            className={buttonClasses + ' -order-1 !text-base'}
+            onClick={continueToWebApp}
+            iconStart={{ icon: 'arrowLeft' }}
+            data-testid="continue-to-web-app-button"
+          >
+            Continue to web app
+          </ActionButton>
         </div>
       </Transition.Child>
     </Transition>

src/components/ToastTextToCad.tsx

@@ -159,7 +159,6 @@ export function ToastTextToCadSuccess({
   projectName,
   fileName,
   isProjectNew,
-  rootProjectName,
 }: {
   toastId: string
   data: TextToCad_type & { fileName: string }
@@ -171,7 +170,6 @@ export function ToastTextToCadSuccess({
   projectName: string
   fileName: string
   isProjectNew: boolean
-  rootProjectName: string
 }) {
   const wrapperRef = useRef<HTMLDivElement | null>(null)
   const canvasRef = useRef<HTMLCanvasElement | null>(null)
@@ -363,23 +361,26 @@ export function ToastTextToCadSuccess({
               if (isDesktop()) {
                 // Delete the file from the project
 
-                if (isProjectNew) {
+                if (projectName && fileName) {
-                  // Delete the entire project if it was newly created from text to CAD
+                  // You are in the new workflow for text to cad at the global application level
-                  systemIOActor.send({
+                  if (isProjectNew) {
-                    type: SystemIOMachineEvents.deleteProject,
+                    // Delete the entire project if it was newly created from text to CAD
-                    data: {
+                    systemIOActor.send({
-                      requestedProjectName: rootProjectName,
+                      type: SystemIOMachineEvents.deleteProject,
-                    },
+                      data: {
-                  })
+                        requestedProjectName: projectName,
-                } else if (projectName && fileName) {
+                      },
-                  // deletes the folder when inside the modeling page
+                    })
-                  // The TTC Create will make a subdir, delete that dir with the main.kcl as well
+                  } else {
-                  systemIOActor.send({
+                    // Only delete the file if the project was preexisting
-                    type: SystemIOMachineEvents.deleteProject,
+                    systemIOActor.send({
-                    data: {
+                      type: SystemIOMachineEvents.deleteKCLFile,
-                      requestedProjectName: projectName,
+                      data: {
-                    },
+                        requestedProjectName: projectName,
-                  })
+                        requestedFileName: fileName,
+                      },
+                    })
+                  }
                 }
               }
 

src/lang/std/engineConnection.ts

@@ -924,7 +924,7 @@ class EngineConnection extends EventTarget {
             },
           }
 
-          // This is required for when the app is running stand-alone / within desktop app.
+          // This is required for when KCMA is running stand-alone / within desktop app.
           // Otherwise when run in a browser, the token is sent implicitly via
           // the Cookie header.
           if (this.token) {
@@ -998,7 +998,7 @@ class EngineConnection extends EventTarget {
           if (!message.success) {
             const errorsString = message?.errors
               ?.map((error) => {
-                return `  - ${error?.error_code || 'Unknown error'}: ${error?.message || 'Unknown message'}`
+                return `  - ${error.error_code}: ${error.message}`
               })
               .join('\n')
             if (message.request_id) {
@@ -1016,7 +1016,7 @@ class EngineConnection extends EventTarget {
             }
 
             const firstError = message?.errors[0]
-            if (firstError?.error_code === 'auth_token_invalid') {
+            if (firstError.error_code === 'auth_token_invalid') {
               this.state = {
                 type: EngineConnectionStateType.Disconnecting,
                 value: {
@@ -1030,7 +1030,7 @@ class EngineConnection extends EventTarget {
               this.disconnectAll()
             }
 
-            if (firstError?.error_code === 'internal_api') {
+            if (firstError.error_code === 'internal_api') {
               this.state = {
                 type: EngineConnectionStateType.Disconnecting,
                 value: {

src/lib/commandBarConfigs/applicationCommandConfig.ts

@@ -10,16 +10,12 @@ import {
   kclSamplesManifestWithNoMultipleFiles,
 } from '@src/lib/kclSamples'
 import { getUniqueProjectName } from '@src/lib/desktopFS'
-import { IS_ML_EXPERIMENTAL } from '@src/lib/constants'
+import { IS_ML_EXPERIMENTAL, PROJECT_ENTRYPOINT } from '@src/lib/constants'
 import toast from 'react-hot-toast'
 import { reportRejection } from '@src/lib/trap'
 import { relevantFileExtensions } from '@src/lang/wasmUtils'
-import {
+import { getStringAfterLastSeparator, webSafePathSplit } from '@src/lib/paths'
-  getStringAfterLastSeparator,
+import { FILE_EXT } from '@src/lib/constants'
-  joinOSPaths,
-  webSafePathSplit,
-} from '@src/lib/paths'
-import { getAllSubDirectoriesAtProjectRoot } from '@src/machines/systemIO/snapshotContext'
 
 function onSubmitKCLSampleCreation({
   sample,
@@ -73,32 +69,20 @@ function onSubmitKCLSampleCreation({
         })
       }
 
-      /**
-       * When adding assemblies to an existing project create the assembly into a unique sub directory
-       */
-      if (!isProjectNew) {
-        requestedFiles.forEach((requestedFile) => {
-          const subDirectoryName = projectPathPart
-          const firstLevelDirectories = getAllSubDirectoriesAtProjectRoot({
-            projectFolderName: requestedFile.requestedProjectName,
-          })
-          const uniqueSubDirectoryName = getUniqueProjectName(
-            subDirectoryName,
-            firstLevelDirectories
-          )
-          requestedFile.requestedProjectName = joinOSPaths(
-            requestedFile.requestedProjectName,
-            uniqueSubDirectoryName
-          )
-        })
-      }
-
       if (requestedFiles.length === 1) {
+        /**
+         * Navigates to the single file that could be renamed on disk for duplicates
+         */
+        const folderNameBecomesKCLFileName = projectPathPart + FILE_EXT
+        // If the project is new create the single file as main.kcl
+        const requestedFileNameWithExtension = isProjectNew
+          ? PROJECT_ENTRYPOINT
+          : folderNameBecomesKCLFileName
         systemIOActor.send({
           type: SystemIOMachineEvents.importFileFromURL,
           data: {
             requestedProjectName: requestedFiles[0].requestedProjectName,
-            requestedFileNameWithExtension: requestedFiles[0].requestedFileName,
+            requestedFileNameWithExtension: requestedFileNameWithExtension,
             requestedCode: requestedFiles[0].requestedCode,
           },
         })
@@ -294,9 +278,10 @@ export function createApplicationCommands({
           return value
         },
         options: ({ argumentsToSubmit }) => {
-          const samples = isDesktop()
+          const samples =
-            ? everyKclSample
+            isDesktop() && argumentsToSubmit.method !== 'existingProject'
-            : kclSamplesManifestWithNoMultipleFiles
+              ? everyKclSample
+              : kclSamplesManifestWithNoMultipleFiles
           return samples.map((sample) => {
             return {
               value: sample.pathFromProjectDirectoryToFirstFile,
@@ -311,10 +296,17 @@ export function createApplicationCommands({
         skip: true,
         options: ({ argumentsToSubmit }, _) => {
           if (isDesktop() && typeof argumentsToSubmit.sample === 'string') {
-            return [
+            const kclSample = findKclSample(argumentsToSubmit.sample)
-              { name: 'New project', value: 'newProject', isCurrent: true },
+            if (kclSample && kclSample.files.length > 1) {
-              { name: 'Existing project', value: 'existingProject' },
+              return [
-            ]
+                { name: 'New project', value: 'newProject', isCurrent: true },
+              ]
+            } else {
+              return [
+                { name: 'New project', value: 'newProject', isCurrent: true },
+                { name: 'Existing project', value: 'existingProject' },
+              ]
+            }
           } else {
             return [{ name: 'Overwrite', value: 'existingProject' }]
           }

src/lib/commandBarConfigs/modelingCommandConfig.ts

@@ -478,7 +478,7 @@ export const modelingMachineCommandConfig: StateMachineCommandSetConfig<
         required: true,
         defaultValue: 'Axis',
         options: [
-          { name: 'Sketch Axis', isCurrent: true, value: 'Axis' },
+          { name: 'Axis', isCurrent: true, value: 'Axis' },
           { name: 'Edge', isCurrent: false, value: 'Edge' },
         ],
         hidden: (context) => Boolean(context.argumentsToSubmit.nodeToEdit),
@@ -489,7 +489,6 @@ export const modelingMachineCommandConfig: StateMachineCommandSetConfig<
             commandContext.argumentsToSubmit.axisOrEdge as string
           ),
         inputType: 'options',
-        displayName: 'Sketch Axis',
         options: [
           { name: 'X Axis', isCurrent: true, value: 'X' },
           { name: 'Y Axis', isCurrent: false, value: 'Y' },

src/lib/textToCad.ts

@@ -6,9 +6,9 @@ import {
   ToastTextToCadError,
   ToastTextToCadSuccess,
 } from '@src/components/ToastTextToCad'
-import { PROJECT_ENTRYPOINT } from '@src/lib/constants'
+import { FILE_EXT, PROJECT_ENTRYPOINT } from '@src/lib/constants'
 import crossPlatformFetch from '@src/lib/crossPlatformFetch'
-import { getUniqueProjectName } from '@src/lib/desktopFS'
+import { getNextFileName } from '@src/lib/desktopFS'
 import { isDesktop } from '@src/lib/isDesktop'
 import { kclManager, systemIOActor } from '@src/lib/singletons'
 import {
@@ -17,8 +17,6 @@ import {
 } from '@src/machines/systemIO/utils'
 import { reportRejection } from '@src/lib/trap'
 import { toSync } from '@src/lib/utils'
-import { getAllSubDirectoriesAtProjectRoot } from '@src/machines/systemIO/snapshotContext'
-import { joinOSPaths } from '@src/lib/paths'
 
 export async function submitTextToCadPrompt(
   prompt: string,
@@ -175,8 +173,7 @@ export async function submitAndAwaitTextToKclSystemIO({
     }
   )
 
-  let newFileName = PROJECT_ENTRYPOINT
+  let newFileName = ''
-  let uniqueProjectName = projectName
 
   const textToCadOutputCreated = await textToCadComplete
     .catch((e) => {
@@ -200,28 +197,30 @@ export async function submitAndAwaitTextToKclSystemIO({
 
       const TRUNCATED_PROMPT_LENGTH = 24
       // Only add the prompt name if it is a preexisting project
-      const subDirectoryAsPromptName = `${value.prompt
+      newFileName = `${value.prompt
         .slice(0, TRUNCATED_PROMPT_LENGTH)
         .replace(/\s/gi, '-')
         .replace(/\W/gi, '-')
-        .toLowerCase()}`
+        .toLowerCase()}${FILE_EXT}`
+
+      // If the project is new generate a main.kcl
+      if (isProjectNew) {
+        newFileName = PROJECT_ENTRYPOINT
+      }
 
       if (isDesktop()) {
-        if (!isProjectNew) {
+        // We have to preemptively run our unique file name logic,
-          // If the project is new, use a sub dir
+        // so that we can pass the unique file name to the toast,
-          const firstLevelDirectories = getAllSubDirectoriesAtProjectRoot({
+        // and by extension the file-deletion-on-reject logic.
-            projectFolderName: projectName,
+        newFileName = getNextFileName({
-          })
+          entryName: newFileName,
-          const uniqueSubDirectoryName = getUniqueProjectName(
+          baseDir: projectName,
-            subDirectoryAsPromptName,
+        }).name
-            firstLevelDirectories
+
-          )
-          uniqueProjectName = joinOSPaths(projectName, uniqueSubDirectoryName)
-        }
         systemIOActor.send({
           type: SystemIOMachineEvents.createKCLFile,
           data: {
-            requestedProjectName: uniqueProjectName,
+            requestedProjectName: projectName,
             requestedCode: value.code,
             requestedFileNameWithExtension: newFileName,
           },
@@ -252,14 +251,11 @@ export async function submitAndAwaitTextToKclSystemIO({
         toastId,
         data: textToCadOutputCreated,
         token,
-        // This can be a subdir within the rootProjectName
+        projectName: projectName,
-        projectName: uniqueProjectName,
         fileName: newFileName,
         navigate,
         isProjectNew,
         settings,
-        // This is always the root project name, no subdir
-        rootProjectName: projectName,
       }),
     {
       id: toastId,

src/machines/systemIO/snapshotContext.ts

@@ -1,6 +1,4 @@
-import type { FileEntry } from '@src/lib/project'
 import { systemIOActor } from '@src/lib/singletons'
-import { isArray } from '@src/lib/utils'
 
 export const folderSnapshot = () => {
   const { folders } = systemIOActor.getSnapshot().context
@@ -11,48 +9,3 @@ export const defaultProjectFolderNameSnapshot = () => {
   const { defaultProjectFolderName } = systemIOActor.getSnapshot().context
   return defaultProjectFolderName
 }
-
-/**
- * From the application project directory go down to a project folder and list all the folders at that directory level
- * application project directory: /home/documents/zoo-modeling-app-projects/
- *
- * /home/documents/zoo-modeling-app-projects/car-door/
- * ├── handle
- * ├── main.kcl
- * └── window
- *
- * The two folders are handle and window
- *
- * @param {Object} params
- * @param {string} params.projectFolderName - The name with no path information.
- * @returns {FileEntry[]} An array of subdirectory names found at the root level of the specified project folder.
- */
-export const getAllSubDirectoriesAtProjectRoot = ({
-  projectFolderName,
-}: { projectFolderName: string }): FileEntry[] => {
-  const subDirectories: FileEntry[] = []
-  const { folders } = systemIOActor.getSnapshot().context
-
-  const projectFolder = folders.find((folder) => {
-    return folder.name === projectFolderName
-  })
-
-  // Find the subdirectories
-  if (projectFolder) {
-    // 1st level
-    const children = projectFolder.children
-    if (children) {
-      children.forEach((childFileOrDirectory) => {
-        // 2nd level
-        const secondLevelChild = childFileOrDirectory.children
-        // if secondLevelChild is null then it is a file
-        if (secondLevelChild && isArray(secondLevelChild)) {
-          // this is a directory!
-          subDirectories.push(childFileOrDirectory)
-        }
-      })
-    }
-  }
-
-  return subDirectories
-}