Cut release v0.25.5 (#4046)

Signed-off-by: Jess Frazelle <github@jessfraz.com>

.eslintignore

@@ -1,2 +1,3 @@
 src/wasm-lib/*
 *.typegen.ts
+packages/codemirror-lsp-client/dist/*

.github/workflows/generate-website-docs.yml

@@ -38,8 +38,10 @@ jobs:
           mkdir -p documentation/content/pages/docs/kcl/
           # cleanup old
           rm -rf documentation/content/pages/docs/kcl/*.md
+          rm -rf documentation/content/pages/docs/kcl/types
           # move new
           mv -f docs/kcl/*.md documentation/content/pages/docs/kcl/
+          mv -f docs/kcl/types documentation/content/pages/docs/kcl/
       - name: commit the changes in the docs repo
         shell: bash
         run: |

docs/kcl/angledLineToX.md

@@ -6,10 +6,10 @@ layout: manual
 
 Create a line segment from the current 2-dimensional sketch origin
 
-along some angle (in degrees) for some length, ending at the provided value in the 'x' dimension.
+along some angle (in degrees) for some length, ending at the provided value in the 'x' dimension.
 
 ```js
-angledLineToX(data: AngledLineToData, sketch_group: SketchGroup, tag?: TagDeclarator) -> SketchGroup
+angledLineToX(data: AngledLineToData, sketch: Sketch, tag?: TagDeclarator) -> Sketch
 ```
 
 
@@ -17,13 +17,13 @@ angledLineToX(data: AngledLineToData, sketch_group: SketchGroup, tag?: TagDeclar
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `data` | [`AngledLineToData`](kcl/types/AngledLineToData) | Data to draw an angled line to a point. | Yes |
-| `sketch_group` | [`SketchGroup`](kcl/types/SketchGroup) | A sketch group is a collection of paths. | Yes |
-| `tag` | [`TagDeclarator`](kcl/types#tag-declaration) |  | No |
+| `data` | [`AngledLineToData`](/docs/kcl/types/AngledLineToData) | Data to draw an angled line to a point. | Yes |
+| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | A sketch is a collection of paths. | Yes |
+| `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) |  | No |
 
 ### Returns
 
-[`SketchGroup`](kcl/types/SketchGroup) - A sketch group is a collection of paths.
+[`Sketch`](/docs/kcl/types/Sketch) - A sketch is a collection of paths.
 
 
 ### Examples

docs/kcl/angledLineToY.md

@@ -6,10 +6,10 @@ layout: manual
 
 Create a line segment from the current 2-dimensional sketch origin
 
-along some angle (in degrees) for some length, ending at the provided value in the 'y' dimension.
+along some angle (in degrees) for some length, ending at the provided value in the 'y' dimension.
 
 ```js
-angledLineToY(data: AngledLineToData, sketch_group: SketchGroup, tag?: TagDeclarator) -> SketchGroup
+angledLineToY(data: AngledLineToData, sketch: Sketch, tag?: TagDeclarator) -> Sketch
 ```
 
 
@@ -17,13 +17,13 @@ angledLineToY(data: AngledLineToData, sketch_group: SketchGroup, tag?: TagDeclar
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `data` | [`AngledLineToData`](kcl/types/AngledLineToData) | Data to draw an angled line to a point. | Yes |
-| `sketch_group` | [`SketchGroup`](kcl/types/SketchGroup) | A sketch group is a collection of paths. | Yes |
-| `tag` | [`TagDeclarator`](kcl/types#tag-declaration) |  | No |
+| `data` | [`AngledLineToData`](/docs/kcl/types/AngledLineToData) | Data to draw an angled line to a point. | Yes |
+| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | A sketch is a collection of paths. | Yes |
+| `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) |  | No |
 
 ### Returns
 
-[`SketchGroup`](kcl/types/SketchGroup) - A sketch group is a collection of paths.
+[`Sketch`](/docs/kcl/types/Sketch) - A sketch is a collection of paths.
 
 
 ### Examples

docs/kcl/bezierCurve.md

@@ -6,10 +6,10 @@ layout: manual
 
 Draw a smooth, continuous, curved line segment from the current origin to
 
-the desired (x, y), using a number of control points to shape the curve's shape.
+the desired (x, y), using a number of control points to shape the curve's shape.
 
 ```js
-bezierCurve(data: BezierData, sketch_group: SketchGroup, tag?: TagDeclarator) -> SketchGroup
+bezierCurve(data: BezierData, sketch: Sketch, tag?: TagDeclarator) -> Sketch
 ```
 
 
@@ -17,13 +17,13 @@ bezierCurve(data: BezierData, sketch_group: SketchGroup, tag?: TagDeclarator) ->
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `data` | [`BezierData`](kcl/types/BezierData) | Data to draw a bezier curve. | Yes |
-| `sketch_group` | [`SketchGroup`](kcl/types/SketchGroup) | A sketch group is a collection of paths. | Yes |
-| `tag` | [`TagDeclarator`](kcl/types#tag-declaration) |  | No |
+| `data` | [`BezierData`](/docs/kcl/types/BezierData) | Data to draw a bezier curve. | Yes |
+| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | A sketch is a collection of paths. | Yes |
+| `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) |  | No |
 
 ### Returns
 
-[`SketchGroup`](kcl/types/SketchGroup) - A sketch group is a collection of paths.
+[`Sketch`](/docs/kcl/types/Sketch) - A sketch is a collection of paths.
 
 
 ### Examples

docs/kcl/cm.md

@@ -7,9 +7,12 @@ layout: manual
 Centimeters conversion factor for current projects units.
 
 No matter what units the current project uses, this function will always return the conversion factor to centimeters.
-For example, if the current project uses inches, this function will return `0.393701`. If the current project uses millimeters, this function will return `10`. If the current project uses centimeters, this function will return `1`.
+
+For example, if the current project uses inches, this function will return `0.393701`. If the current project uses millimeters, this function will return `10`. If the current project uses centimeters, this function will return `1`.
+
 **Caution**: This function is only intended to be used when you absolutely MUST have different units in your code than the project settings. Otherwise, it is a bad pattern to use this function.
-We merely provide these functions for convenience and readability, as `10 * cm()` is more readable that your intent is "I want 10 centimeters" than `10 * 10`, if the project settings are in millimeters.
+
+We merely provide these functions for convenience and readability, as `10 * cm()` is more readable that your intent is "I want 10 centimeters" than `10 * 10`, if the project settings are in millimeters.
 
 ```js
 cm() -> number

docs/kcl/extrude.md

@@ -9,7 +9,7 @@ Extend a 2-dimensional sketch through a third dimension in order to
 create new 3-dimensional volume, or if extruded into an existing volume, cut into an existing solid.
 
 ```js
-extrude(length: number, sketch_group_set: SketchGroupSet) -> ExtrudeGroupSet
+extrude(length: number, sketch_set: SketchSet) -> SolidSet
 ```
 
 
@@ -18,11 +18,11 @@ extrude(length: number, sketch_group_set: SketchGroupSet) -> ExtrudeGroupSet
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `length` | `number` |  | Yes |
-| `sketch_group_set` | [`SketchGroupSet`](kcl/types/SketchGroupSet) | A sketch group or a group of sketch groups. | Yes |
+| `sketch_set` | [`SketchSet`](/docs/kcl/types/SketchSet) | A sketch or a group of sketches. | Yes |
 
 ### Returns
 
-[`ExtrudeGroupSet`](kcl/types/ExtrudeGroupSet) - A extrude group or a group of extrude groups.
+[`SolidSet`](/docs/kcl/types/SolidSet) - A solid or a group of solids.
 
 
 ### Examples

docs/kcl/ft.md

@@ -7,9 +7,12 @@ layout: manual
 Feet conversion factor for current projects units.
 
 No matter what units the current project uses, this function will always return the conversion factor to feet.
-For example, if the current project uses inches, this function will return `12`. If the current project uses millimeters, this function will return `304.8`. If the current project uses feet, this function will return `1`.
+
+For example, if the current project uses inches, this function will return `12`. If the current project uses millimeters, this function will return `304.8`. If the current project uses feet, this function will return `1`.
+
 **Caution**: This function is only intended to be used when you absolutely MUST have different units in your code than the project settings. Otherwise, it is a bad pattern to use this function.
-We merely provide these functions for convenience and readability, as `10 * ft()` is more readable that your intent is "I want 10 feet" than `10 * 304.8`, if the project settings are in millimeters.
+
+We merely provide these functions for convenience and readability, as `10 * ft()` is more readable that your intent is "I want 10 feet" than `10 * 304.8`, if the project settings are in millimeters.
 
 ```js
 ft() -> number

docs/kcl/getNextAdjacentEdge.md

@@ -17,7 +17,7 @@ getNextAdjacentEdge(tag: TagIdentifier) -> Uuid
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `tag` | [`TagIdentifier`](kcl/types#tag-identifier) |  | Yes |
+| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) |  | Yes |
 
 ### Returns
 

docs/kcl/hole.md

@@ -9,7 +9,7 @@ Use a 2-dimensional sketch to cut a hole in another 2-dimensional sketch.
 
 
 ```js
-hole(hole_sketch_group: SketchGroupSet, sketch_group: SketchGroup) -> SketchGroup
+hole(hole_sketch: SketchSet, sketch: Sketch) -> Sketch
 ```
 
 
@@ -17,12 +17,12 @@ hole(hole_sketch_group: SketchGroupSet, sketch_group: SketchGroup) -> SketchGrou
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `hole_sketch_group` | [`SketchGroupSet`](kcl/types/SketchGroupSet) | A sketch group or a group of sketch groups. | Yes |
-| `sketch_group` | [`SketchGroup`](kcl/types/SketchGroup) | A sketch group is a collection of paths. | Yes |
+| `hole_sketch` | [`SketchSet`](/docs/kcl/types/SketchSet) | A sketch or a group of sketches. | Yes |
+| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | A sketch is a collection of paths. | Yes |
 
 ### Returns
 
-[`SketchGroup`](kcl/types/SketchGroup) - A sketch group is a collection of paths.
+[`Sketch`](/docs/kcl/types/Sketch) - A sketch is a collection of paths.
 
 
 ### Examples

docs/kcl/inch.md

@@ -7,9 +7,12 @@ layout: manual
 Inches conversion factor for current projects units.
 
 No matter what units the current project uses, this function will always return the conversion factor to inches.
-For example, if the current project uses inches, this function will return `1`. If the current project uses millimeters, this function will return `25.4`.
+
+For example, if the current project uses inches, this function will return `1`. If the current project uses millimeters, this function will return `25.4`.
+
 **Caution**: This function is only intended to be used when you absolutely MUST have different units in your code than the project settings. Otherwise, it is a bad pattern to use this function.
-We merely provide these functions for convenience and readability, as `10 * inch()` is more readable that your intent is "I want 10 inches" than `10 * 25.4`, if the project settings are in millimeters.
+
+We merely provide these functions for convenience and readability, as `10 * inch()` is more readable that your intent is "I want 10 inches" than `10 * 25.4`, if the project settings are in millimeters.
 
 ```js
 inch() -> number

docs/kcl/lastSegY.md

@@ -1,15 +1,15 @@
 ---
 title: "lastSegY"
-excerpt: "Extract the 'y' axis value of the last line segment in the provided 2-d"
+excerpt: "Extract the 'y' axis value of the last line segment in the provided 2-d"
 layout: manual
 ---
 
-Extract the 'y' axis value of the last line segment in the provided 2-d
+Extract the 'y' axis value of the last line segment in the provided 2-d
 
 sketch.
 
 ```js
-lastSegY(sketch_group: SketchGroup) -> number
+lastSegY(sketch: Sketch) -> number
 ```
 
 
@@ -17,7 +17,7 @@ lastSegY(sketch_group: SketchGroup) -> number
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch_group` | [`SketchGroup`](kcl/types/SketchGroup) | A sketch group is a collection of paths. | Yes |
+| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | A sketch is a collection of paths. | Yes |
 
 ### Returns
 

docs/kcl/lineTo.md

@@ -9,7 +9,7 @@ Draw a line from the current origin to some absolute (x, y) point.
 
 
 ```js
-lineTo(to: [number], sketch_group: SketchGroup, tag?: TagDeclarator) -> SketchGroup
+lineTo(to: [number], sketch: Sketch, tag?: TagDeclarator) -> Sketch
 ```
 
 
@@ -17,13 +17,13 @@ lineTo(to: [number], sketch_group: SketchGroup, tag?: TagDeclarator) -> SketchGr
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `to` | [`[number]`](kcl/types/[number]) |  | Yes |
-| `sketch_group` | [`SketchGroup`](kcl/types/SketchGroup) | A sketch group is a collection of paths. | Yes |
-| `tag` | [`TagDeclarator`](kcl/types#tag-declaration) |  | No |
+| `to` | `[number]` |  | Yes |
+| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | A sketch is a collection of paths. | Yes |
+| `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) |  | No |
 
 ### Returns
 
-[`SketchGroup`](kcl/types/SketchGroup) - A sketch group is a collection of paths.
+[`Sketch`](/docs/kcl/types/Sketch) - A sketch is a collection of paths.
 
 
 ### Examples

docs/kcl/log.md

@@ -6,7 +6,7 @@ layout: manual
 
 Compute the logarithm of the number with respect to an arbitrary base.
 
-The result might not be correctly rounded owing to implementation details; `log2()` can produce more accurate results for base 2, and `log10()` can produce more accurate results for base 10.
+The result might not be correctly rounded owing to implementation details; `log2()` can produce more accurate results for base 2, and `log10()` can produce more accurate results for base 10.
 
 ```js
 log(num: number, base: number) -> number

docs/kcl/m.md

@@ -7,9 +7,12 @@ layout: manual
 Meters conversion factor for current projects units.
 
 No matter what units the current project uses, this function will always return the conversion factor to meters.
-For example, if the current project uses inches, this function will return `39.3701`. If the current project uses millimeters, this function will return `1000`. If the current project uses meters, this function will return `1`.
+
+For example, if the current project uses inches, this function will return `39.3701`. If the current project uses millimeters, this function will return `1000`. If the current project uses meters, this function will return `1`.
+
 **Caution**: This function is only intended to be used when you absolutely MUST have different units in your code than the project settings. Otherwise, it is a bad pattern to use this function.
-We merely provide these functions for convenience and readability, as `10 * m()` is more readable that your intent is "I want 10 meters" than `10 * 1000`, if the project settings are in millimeters.
+
+We merely provide these functions for convenience and readability, as `10 * m()` is more readable that your intent is "I want 10 meters" than `10 * 1000`, if the project settings are in millimeters.
 
 ```js
 m() -> number

docs/kcl/mm.md

@@ -7,9 +7,12 @@ layout: manual
 Millimeters conversion factor for current projects units.
 
 No matter what units the current project uses, this function will always return the conversion factor to millimeters.
-For example, if the current project uses inches, this function will return `(1/25.4)`. If the current project uses millimeters, this function will return `1`.
+
+For example, if the current project uses inches, this function will return `(1/25.4)`. If the current project uses millimeters, this function will return `1`.
+
 **Caution**: This function is only intended to be used when you absolutely MUST have different units in your code than the project settings. Otherwise, it is a bad pattern to use this function.
-We merely provide these functions for convenience and readability, as `10 * mm()` is more readable that your intent is "I want 10 millimeters" than `10 * (1/25.4)`, if the project settings are in inches.
+
+We merely provide these functions for convenience and readability, as `10 * mm()` is more readable that your intent is "I want 10 millimeters" than `10 * (1/25.4)`, if the project settings are in inches.
 
 ```js
 mm() -> number

docs/kcl/polar.md

@@ -17,11 +17,11 @@ polar(data: PolarCoordsData) -> [number]
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `data` | [`PolarCoordsData`](kcl/types/PolarCoordsData) | Data for polar coordinates. | Yes |
+| `data` | [`PolarCoordsData`](/docs/kcl/types/PolarCoordsData) | Data for polar coordinates. | Yes |
 
 ### Returns
 
-[`[number]`](kcl/types/[number]) 
+`[number]` 
 
 
 ### Examples

docs/kcl/profileStart.md

@@ -1,15 +1,15 @@
 ---
 title: "profileStart"
-excerpt: "Extract the provided 2-dimensional sketch group's profile's origin"
+excerpt: "Extract the provided 2-dimensional sketch's profile's origin"
 layout: manual
 ---
 
-Extract the provided 2-dimensional sketch group's profile's origin
+Extract the provided 2-dimensional sketch's profile's origin
 
 value.
 
 ```js
-profileStart(sketch_group: SketchGroup) -> [number]
+profileStart(sketch: Sketch) -> [number]
 ```
 
 
@@ -17,11 +17,11 @@ profileStart(sketch_group: SketchGroup) -> [number]
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch_group` | [`SketchGroup`](kcl/types/SketchGroup) | A sketch group is a collection of paths. | Yes |
+| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | A sketch is a collection of paths. | Yes |
 
 ### Returns
 
-[`[number]`](kcl/types/[number]) 
+`[number]` 
 
 
 ### Examples

docs/kcl/profileStartY.md

@@ -1,15 +1,15 @@
 ---
 title: "profileStartY"
-excerpt: "Extract the provided 2-dimensional sketch group's profile's origin's 'y'"
+excerpt: "Extract the provided 2-dimensional sketch's profile's origin's 'y'"
 layout: manual
 ---
 
-Extract the provided 2-dimensional sketch group's profile's origin's 'y'
+Extract the provided 2-dimensional sketch's profile's origin's 'y'
 
 value.
 
 ```js
-profileStartY(sketch_group: SketchGroup) -> number
+profileStartY(sketch: Sketch) -> number
 ```
 
 
@@ -17,7 +17,7 @@ profileStartY(sketch_group: SketchGroup) -> number
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch_group` | [`SketchGroup`](kcl/types/SketchGroup) | A sketch group is a collection of paths. | Yes |
+| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | A sketch is a collection of paths. | Yes |
 
 ### Returns
 

docs/kcl/rem.md

@@ -1,12 +1,12 @@
 ---
 title: "rem"
-excerpt: "Compute the remainder after dividing `num` by `div`."
+excerpt: "Compute the remainder after dividing `num` by `div`."
 layout: manual
 ---
 
-Compute the remainder after dividing `num` by `div`.
+Compute the remainder after dividing `num` by `div`.
 
-If `num` is negative, the result will be too.
+If `num` is negative, the result will be too.
 
 ```js
 rem(num: i64, divisor: i64) -> i64

docs/kcl/segEndX.md

@@ -1,10 +1,10 @@
 ---
 title: "segEndX"
-excerpt: "Compute the ending point of the provided line segment along the 'x' axis."
+excerpt: "Compute the ending point of the provided line segment along the 'x' axis."
 layout: manual
 ---
 
-Compute the ending point of the provided line segment along the 'x' axis.
+Compute the ending point of the provided line segment along the 'x' axis.
 
 
 
@@ -17,7 +17,7 @@ segEndX(tag: TagIdentifier) -> number
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `tag` | [`TagIdentifier`](kcl/types#tag-identifier) |  | Yes |
+| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) |  | Yes |
 
 ### Returns
 

docs/kcl/segLen.md

@@ -17,7 +17,7 @@ segLen(tag: TagIdentifier) -> number
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `tag` | [`TagIdentifier`](kcl/types#tag-identifier) |  | Yes |
+| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) |  | Yes |
 
 ### Returns
 

docs/kcl/types/AngledLineData.md

@@ -8,30 +8,26 @@ Data to draw an angled line.
 
 
 
+
 **This schema accepts any of the following:**
 
 An angle and length with explicitly named parameters
 
-
-**Type:** `object`
+[`PolarCoordsData`](/docs/kcl/types/PolarCoordsData)
+
 
 
 
 
-## Properties
 
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `angle` |`number` (`double`)| The angle of the line (in degrees). | No |
-| `length` |`number` (`double`)| The length of the line. | No |
 
 
 ----
 An angle and length given as a pair
 
-
 **Type:** `array`
 
+`[number, number]`
 
 
 

docs/kcl/types/AngledLineThatIntersectsData.md

@@ -6,18 +6,18 @@ layout: manual
 
 Data for drawing an angled line that intersects with a given line.
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `angle` |`number` (`double`)| The angle of the line. | No |
-| `intersectTag` |`object`| The tag of the line to intersect with. | No |
-| `offset` |`number` (`double`)| The offset from the intersecting line. | No |
+| `angle` |`number`| The angle of the line. | No |
+| `intersectTag` |[`TagIdentifier`](/docs/kcl/types#tag-identifier)| The tag of the line to intersect with. | No |
+| `offset` |`number`| The offset from the intersecting line. | No |
 
 

docs/kcl/types/AngledLineToData.md

@@ -6,17 +6,17 @@ layout: manual
 
 Data to draw an angled line to a point.
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `angle` |`number` (`double`)| The angle of the line. | No |
-| `to` |`number` (`double`)| The point to draw to. | No |
+| `angle` |`number`| The angle of the line. | No |
+| `to` |`number`| The point to draw to. | No |
 
 

docs/kcl/types/ArcData.md

@@ -8,41 +8,42 @@ Data to draw an arc.
 
 
 
+
 **This schema accepts any of the following:**
 
 Angles and radius with an optional tag.
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `angleEnd` |`number` (`double`)| The end angle. | No |
-| `angleStart` |`number` (`double`)| The start angle. | No |
-| `radius` |`number` (`double`)| The radius. | No |
+| `angleStart` |`number` (**maximum:** 360.0) (**minimum:** -360.0)| The start angle. | No |
+| `angleEnd` |`number` (**maximum:** 360.0) (**minimum:** -360.0)| The end angle. | No |
+| `radius` |`number`| The radius. | No |
 
 
 ----
 Center, to and radius with an optional tag.
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `center` |`array`| The center. | No |
-| `radius` |`number` (`double`)| The radius. | No |
-| `to` |`array`| The to point. | No |
+| `center` |`[number, number]`| The center. | No |
+| `to` |`[number, number]`| The to point. | No |
+| `radius` |`number`| The radius. | No |
 
 
 ----

docs/kcl/types/Axis.md

@@ -0,0 +1,46 @@
+---
+title: "Axis"
+excerpt: "Co-ordinate axis specifier."
+layout: manual
+---
+
+Co-ordinate axis specifier.
+
+See [cglearn.eu] for background reading.
+
+[cglearn.eu]: https://cglearn.eu/pub/computer-graphics/introduction-to-geometry#material-coordinate-systems-1
+
+
+
+
+
+**This schema accepts exactly one of the following:**
+
+'Y' axis.
+
+**enum:** `y`
+
+
+
+
+
+
+
+
+----
+'Z' axis.
+
+**enum:** `z`
+
+
+
+
+
+
+
+
+----
+
+
+
+

docs/kcl/types/AxisAndOrigin.md

@@ -0,0 +1,81 @@
+---
+title: "AxisAndOrigin"
+excerpt: "Axis and origin."
+layout: manual
+---
+
+Axis and origin.
+
+
+
+
+
+**This schema accepts exactly one of the following:**
+
+X-axis.
+
+**enum:** `X`
+
+
+
+
+
+
+
+
+----
+Y-axis.
+
+**enum:** `Y`
+
+
+
+
+
+
+
+
+----
+Flip the X-axis.
+
+**enum:** `-X`
+
+
+
+
+
+
+
+
+----
+Flip the Y-axis.
+
+**enum:** `-Y`
+
+
+
+
+
+
+
+
+----
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `custom` |`object`|  | No |
+
+
+----
+
+
+
+

docs/kcl/types/AxisDirectionPair.md

@@ -0,0 +1,22 @@
+---
+title: "AxisDirectionPair"
+excerpt: "An [[`Axis`](/docs/kcl/types/Axis)] paired with a [[`Direction`](/docs/kcl/types/Direction)]."
+layout: manual
+---
+
+An [[`Axis`](/docs/kcl/types/Axis)] paired with a [[`Direction`](/docs/kcl/types/Direction)].
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `axis` |[`Axis`](/docs/kcl/types/Axis)| Axis specifier. | No |
+| `direction` |[`Direction`](/docs/kcl/types/Direction)| Specifies which direction the axis is pointing. | No |
+
+

docs/kcl/types/AxisOrEdgeReference.md

@@ -0,0 +1,42 @@
+---
+title: "AxisOrEdgeReference"
+excerpt: "Axis or tagged edge."
+layout: manual
+---
+
+Axis or tagged edge.
+
+
+
+
+**This schema accepts any of the following:**
+
+Axis and origin.
+
+[`AxisAndOrigin`](/docs/kcl/types/AxisAndOrigin)
+
+
+
+
+
+
+
+
+----
+Tagged edge.
+
+[`EdgeReference`](/docs/kcl/types/EdgeReference)
+
+
+
+
+
+
+
+
+----
+
+
+
+
+

docs/kcl/types/BasePath.md

@@ -0,0 +1,24 @@
+---
+title: "BasePath"
+excerpt: "A base path."
+layout: manual
+---
+
+A base path.
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `from` |`[number, number]`| The from point. | No |
+| `to` |`[number, number]`| The to point. | No |
+| `tag` |[`TagDeclarator`](/docs/kcl/types#tag-declaration)| The tag of the path. | No |
+| `__geoMeta` |[`GeoMeta`](/docs/kcl/types/GeoMeta)| Metadata. | No |
+
+

docs/kcl/types/BezierData.md

@@ -6,18 +6,18 @@ layout: manual
 
 Data to draw a bezier curve.
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `control1` |`array`| The first control point. | No |
-| `control2` |`array`| The second control point. | No |
-| `to` |`array`| The to point. | No |
+| `to` |`[number, number]`| The to point. | No |
+| `control1` |`[number, number]`| The first control point. | No |
+| `control2` |`[number, number]`| The second control point. | No |
 
 

docs/kcl/types/ChamferData.md

@@ -6,17 +6,17 @@ layout: manual
 
 Data for chamfers.
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `length` |`number` (`double`)| The length of the chamfer. | No |
-| `tags` |`array`| The tags of the paths you want to chamfer. | No |
+| `length` |`number`| The length of the chamfer. | No |
+| `tags` |`[` [`EdgeReference`](/docs/kcl/types/EdgeReference) `]`| The tags of the paths you want to chamfer. | No |
 
 

docs/kcl/types/CircleData.md

@@ -6,17 +6,17 @@ layout: manual
 
 Data for drawing an circle
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `center` |`array`| The center of the circle. | No |
-| `radius` |`number` (`double`)| The circle radius | No |
+| `center` |`[number, number]`| The center of the circle. | No |
+| `radius` |`number`| The circle radius | No |
 
 

docs/kcl/types/CircularPattern2dData.md

@@ -6,19 +6,19 @@ layout: manual
 
 Data for a circular pattern on a 2D sketch.
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `arcDegrees` |`number` (`double`)| The arc angle (in degrees) to place the repetitions. Must be greater than 0. | No |
-| `center` |`array`| The center about which to make the pattern. This is a 2D vector. | No |
-| `repetitions` |`integer` (`uint32`)| The number of repetitions. Must be greater than 0. This excludes the original entity. For example, if `repetitions` is 1, the original entity will be copied once. | No |
+| `repetitions` |[`Uint`](/docs/kcl/types/Uint)| The number of repetitions. Must be greater than 0. This excludes the original entity. For example, if `repetitions` is 1, the original entity will be copied once. | No |
+| `center` |`[number, number]`| The center about which to make the pattern. This is a 2D vector. | No |
+| `arcDegrees` |`number`| The arc angle (in degrees) to place the repetitions. Must be greater than 0. | No |
 | `rotateDuplicates` |`boolean`| Whether or not to rotate the duplicates as they are copied. | No |
 
 

docs/kcl/types/CircularPattern3dData.md

@@ -6,20 +6,20 @@ layout: manual
 
 Data for a circular pattern on a 3D model.
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `arcDegrees` |`number` (`double`)| The arc angle (in degrees) to place the repetitions. Must be greater than 0. | No |
-| `axis` |`array`| The axis around which to make the pattern. This is a 3D vector. | No |
-| `center` |`array`| The center about which to make the pattern. This is a 3D vector. | No |
-| `repetitions` |`integer` (`uint32`)| The number of repetitions. Must be greater than 0. This excludes the original entity. For example, if `repetitions` is 1, the original entity will be copied once. | No |
+| `repetitions` |[`Uint`](/docs/kcl/types/Uint)| The number of repetitions. Must be greater than 0. This excludes the original entity. For example, if `repetitions` is 1, the original entity will be copied once. | No |
+| `axis` |`[number, number, number]`| The axis around which to make the pattern. This is a 3D vector. | No |
+| `center` |`[number, number, number]`| The center about which to make the pattern. This is a 3D vector. | No |
+| `arcDegrees` |`number`| The arc angle (in degrees) to place the repetitions. Must be greater than 0. | No |
 | `rotateDuplicates` |`boolean`| Whether or not to rotate the duplicates as they are copied. | No |
 
 

docs/kcl/types/Direction.md

@@ -0,0 +1,42 @@
+---
+title: "Direction"
+excerpt: "Specifies the sign of a co-ordinate axis."
+layout: manual
+---
+
+Specifies the sign of a co-ordinate axis.
+
+
+
+
+
+**This schema accepts exactly one of the following:**
+
+Increasing numbers.
+
+**enum:** `positive`
+
+
+
+
+
+
+
+
+----
+Decreasing numbers.
+
+**enum:** `negative`
+
+
+
+
+
+
+
+
+----
+
+
+
+

docs/kcl/types/EdgeCut.md

@@ -0,0 +1,58 @@
+---
+title: "EdgeCut"
+excerpt: "A fillet or a chamfer."
+layout: manual
+---
+
+A fillet or a chamfer.
+
+
+
+
+
+**This schema accepts exactly one of the following:**
+
+A fillet.
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `fillet`|  | No |
+| `id` |`string`| The id of the engine command that called this fillet. | No |
+| `radius` |`number`|  | No |
+| `edgeId` |`string`| The engine id of the edge to fillet. | No |
+| `tag` |[`TagDeclarator`](/docs/kcl/types#tag-declaration)|  | No |
+
+
+----
+A chamfer.
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `chamfer`|  | No |
+| `id` |`string`| The id of the engine command that called this chamfer. | No |
+| `length` |`number`|  | No |
+| `edgeId` |`string`| The engine id of the edge to chamfer. | No |
+| `tag` |[`TagDeclarator`](/docs/kcl/types#tag-declaration)|  | No |
+
+
+----
+
+
+
+

docs/kcl/types/EdgeReference.md

@@ -0,0 +1,41 @@
+---
+title: "EdgeReference"
+excerpt: "A tag or a uuid of an edge."
+layout: manual
+---
+
+A tag or a uuid of an edge.
+
+
+
+
+**This schema accepts any of the following:**
+
+A uuid of an edge.
+
+**Type:** `string` (`uuid`)
+
+
+
+
+
+
+
+----
+A tag of an edge.
+
+[`TagIdentifier`](/docs/kcl/types#tag-identifier)
+
+
+
+
+
+
+
+
+----
+
+
+
+
+

docs/kcl/types/ExtrudeGroup.md

@@ -1,28 +0,0 @@
----
-title: "ExtrudeGroup"
-excerpt: "An extrude group is a collection of extrude surfaces."
-layout: manual
----
-
-An extrude group is a collection of extrude surfaces.
-
-
-**Type:** `object`
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `__meta` |`array`| Metadata. | No |
-| `edgeCuts` |`array`| Chamfers or fillets on this extrude group. | No |
-| `endCapId` |`string` (`uuid`)| The id of the extrusion end cap | No |
-| `height` |`number` (`double`)| The height of the extrude group. | No |
-| `id` |`string` (`uuid`)| The id of the extrude group. | No |
-| `sketchGroup` |`object`| The sketch group. | No |
-| `startCapId` |`string` (`uuid`)| The id of the extrusion start cap | No |
-| `value` |`array`| The extrude surfaces. | No |
-
-

docs/kcl/types/ExtrudeGroupSet.md

@@ -1,58 +0,0 @@
----
-title: "ExtrudeGroupSet"
-excerpt: "A extrude group or a group of extrude groups."
-layout: manual
----
-
-A extrude group or a group of extrude groups.
-
-
-
-
-**This schema accepts exactly one of the following:**
-
-An extrude group is a collection of extrude surfaces.
-
-
-**Type:** `object`
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `__meta` |`array`| Metadata. | No |
-| `edgeCuts` |`array`| Chamfers or fillets on this extrude group. | No |
-| `endCapId` |`string` (`uuid`)| The id of the extrusion end cap | No |
-| `height` |`number` (`double`)| The height of the extrude group. | No |
-| `id` |`string` (`uuid`)| The id of the extrude group. | No |
-| `sketchGroup` |`object`| The sketch group. | No |
-| `startCapId` |`string` (`uuid`)| The id of the extrusion start cap | No |
-| `type` |enum: `extrudeGroup`
-|  | No |
-| `value` |`array`| The extrude surfaces. | No |
-
-
-----
-
-
-**Type:** `[object, array]`
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `extrudeGroups`
-|  | No |
-
-
-----
-
-
-
-

docs/kcl/types/ExtrudeSurface.md

@@ -0,0 +1,98 @@
+---
+title: "ExtrudeSurface"
+excerpt: "An extrude surface."
+layout: manual
+---
+
+An extrude surface.
+
+
+
+
+
+**This schema accepts exactly one of the following:**
+
+An extrude plane.
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `extrudePlane`|  | No |
+| `faceId` |`string`| The face id for the extrude plane. | No |
+| `tag` |[`TagDeclarator`](/docs/kcl/types#tag-declaration)| The tag. | No |
+| `id` |`string`| The id of the geometry. | No |
+| `sourceRange` |`SourceRange`| The source range. | No |
+
+
+----
+An extruded arc.
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `extrudeArc`|  | No |
+| `faceId` |`string`| The face id for the extrude plane. | No |
+| `tag` |[`TagDeclarator`](/docs/kcl/types#tag-declaration)| The tag. | No |
+| `id` |`string`| The id of the geometry. | No |
+| `sourceRange` |`SourceRange`| The source range. | No |
+
+
+----
+Geometry metadata.
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `chamfer`|  | No |
+| `faceId` |`string`| The id for the chamfer surface. | No |
+| `tag` |[`TagDeclarator`](/docs/kcl/types#tag-declaration)| The tag. | No |
+| `id` |`string`| The id of the geometry. | No |
+| `sourceRange` |`SourceRange`| The source range. | No |
+
+
+----
+Geometry metadata.
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `fillet`|  | No |
+| `faceId` |`string`| The id for the fillet surface. | No |
+| `tag` |[`TagDeclarator`](/docs/kcl/types#tag-declaration)| The tag. | No |
+| `id` |`string`| The id of the geometry. | No |
+| `sourceRange` |`SourceRange`| The source range. | No |
+
+
+----
+
+
+
+

docs/kcl/types/FaceTag.md

@@ -8,36 +8,16 @@ A tag for a face.
 
 
 
+
 **This schema accepts any of the following:**
 
+A tag for a face.
+
+[`StartOrEnd`](/docs/kcl/types/StartOrEnd)
 
 
 
 
-**This schema accepts exactly one of the following:**
-
-The start face as in before you extruded. This could also be known as the bottom face. But we do not call it bottom because it would be the top face if you extruded it in the opposite direction or flipped the camera.
-
-
-**enum:** `start`
-
-
-
-
-
-
-----
-The end face after you extruded. This could also be known as the top face. But we do not call it top because it would be the bottom face if you extruded it in the opposite direction or flipped the camera.
-
-
-**enum:** `end`
-
-
-
-
-
-
-----
 
 
 
@@ -45,19 +25,13 @@ The end face after you extruded. This could also be known as the top face. But w
 ----
 A tag for the face.
 
-
-**Type:** `object`
+[`TagIdentifier`](/docs/kcl/types#tag-identifier)
+
 
 
 
 
-## Properties
 
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `__meta` |`array`|  | No |
-| `info` |`object`| Engine information for a tag. | No |
-| `value` |`string`|  | No |
 
 
 ----

docs/kcl/types/FilletData.md

@@ -6,18 +6,18 @@ layout: manual
 
 Data for fillets.
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `radius` |`number` (`double`)| The radius of the fillet. | No |
-| `tags` |`array`| The tags of the paths you want to fillet. | No |
-| `tolerance` |`number` (`double`)| The tolerance for the fillet. | No |
+| `radius` |`number`| The radius of the fillet. | No |
+| `tags` |`[` [`EdgeReference`](/docs/kcl/types/EdgeReference) `]`| The tags of the paths you want to fillet. | No |
+| `tolerance` |`number`| The tolerance for the fillet. | No |
 
 

docs/kcl/types/GeoMeta.md

@@ -0,0 +1,22 @@
+---
+title: "GeoMeta"
+excerpt: "Geometry metadata."
+layout: manual
+---
+
+Geometry metadata.
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `id` |`string`| The id of the geometry. | No |
+| `sourceRange` |`SourceRange`| The source range. | No |
+
+

docs/kcl/types/HelixData.md

@@ -6,19 +6,19 @@ layout: manual
 
 Data for helices.
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `angleStart` |`number` (`double`)| Start angle (in degrees). | No |
-| `ccw` |`boolean`| Is the helix rotation counter clockwise? The default is `false`. | No |
-| `length` |`number` (`double`)| Length of the helix. If this argument is not provided, the height of the extrude group is used. | No |
-| `revolutions` |`number` (`double`)| Number of revolutions. | No |
+| `revolutions` |`number`| Number of revolutions. | No |
+| `angleStart` |`number`| Start angle (in degrees). | No |
+| `ccw` |`boolean`| Is the helix rotation counter clockwise? The default is `false`. | No |
+| `length` |`number`| Length of the helix. If this argument is not provided, the height of the solid is used. | No |
 
 

docs/kcl/types/ImportFormat.md

@@ -9,133 +9,124 @@ Import format specifier
 
 
 
+
 **This schema accepts exactly one of the following:**
 
 Autodesk Filmbox (FBX) format
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `type` |enum: `fbx`
-|  | No |
+| `type` |enum: `fbx`|  | No |
 
 
 ----
 Binary glTF 2.0. We refer to this as glTF since that is how our customers refer to it, but this can also import binary glTF (glb).
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `type` |enum: `gltf`
-|  | No |
+| `type` |enum: `gltf`|  | No |
 
 
 ----
 Wavefront OBJ format.
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `coords` |`object`| Co-ordinate system of input data. Defaults to the [KittyCAD co-ordinate system. | No |
-| `type` |enum: `obj`
-|  | No |
-| `units` |`oneOf`
-| The units of the input data. This is very important for correct scaling and when calculating physics properties like mass, etc. Defaults to millimeters. | No |
+| `type` |enum: `obj`|  | No |
+| `coords` |[`System`](/docs/kcl/types/System)| Co-ordinate system of input data. Defaults to the [KittyCAD co-ordinate system. | No |
+| `units` |[`UnitLength`](/docs/kcl/types/UnitLength)| The units of the input data. This is very important for correct scaling and when calculating physics properties like mass, etc. Defaults to millimeters. | No |
 
 
 ----
 The PLY Polygon File Format.
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `coords` |`object`| Co-ordinate system of input data. Defaults to the [KittyCAD co-ordinate system. | No |
-| `type` |enum: `ply`
-|  | No |
-| `units` |`oneOf`
-| The units of the input data. This is very important for correct scaling and when calculating physics properties like mass, etc. Defaults to millimeters. | No |
+| `type` |enum: `ply`|  | No |
+| `coords` |[`System`](/docs/kcl/types/System)| Co-ordinate system of input data. Defaults to the [KittyCAD co-ordinate system. | No |
+| `units` |[`UnitLength`](/docs/kcl/types/UnitLength)| The units of the input data. This is very important for correct scaling and when calculating physics properties like mass, etc. Defaults to millimeters. | No |
 
 
 ----
 SolidWorks part (SLDPRT) format.
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `type` |enum: `sldprt`
-|  | No |
+| `type` |enum: `sldprt`|  | No |
 
 
 ----
 ISO 10303-21 (STEP) format.
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `type` |enum: `step`
-|  | No |
+| `type` |enum: `step`|  | No |
 
 
 ----
 ST**ereo**L**ithography format.
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `coords` |`object`| Co-ordinate system of input data. Defaults to the [KittyCAD co-ordinate system. | No |
-| `type` |enum: `stl`
-|  | No |
-| `units` |`oneOf`
-| The units of the input data. This is very important for correct scaling and when calculating physics properties like mass, etc. Defaults to millimeters. | No |
+| `type` |enum: `stl`|  | No |
+| `coords` |[`System`](/docs/kcl/types/System)| Co-ordinate system of input data. Defaults to the [KittyCAD co-ordinate system. | No |
+| `units` |[`UnitLength`](/docs/kcl/types/UnitLength)| The units of the input data. This is very important for correct scaling and when calculating physics properties like mass, etc. Defaults to millimeters. | No |
 
 
 ----

docs/kcl/types/ImportedGeometry.md

@@ -6,18 +6,18 @@ layout: manual
 
 Data for an imported geometry.
 
-
 **Type:** `object`
 
 
 
 
+
 ## Properties
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `__meta` |`array`|  | No |
-| `id` |`string` (`uuid`)| The ID of the imported geometry. | No |
-| `value` |`array`| The original file paths. | No |
+| `id` |`string`| The ID of the imported geometry. | No |
+| `value` |`[` `string` `]`| The original file paths. | No |
+| `__meta` |`[` [`Metadata`](/docs/kcl/types/Metadata) `]`|  | No |