Fix partial execution

* Add Rust side artifacts for startSketchOn face or plane

* move ast digging

---------

Co-authored-by: Kurt Hutten Irev-Dev <k.hutten@protonmail.ch>

e2e/playwright/basic-sketch.spec.ts

@@ -54,23 +54,26 @@ async function doBasicSketch(
   const startXPx = 600
   await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
   if (openPanes.includes('code')) {
-    await expect(u.codeLocator).toHaveText(`sketch001 = startSketchOn('XZ')
+    await expect(u.codeLocator).toContainText(
-  |> startProfileAt(${commonPoints.startAt}, %)`)
+      `sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${commonPoints.startAt}, sketch001)`
+    )
   }
   await page.waitForTimeout(500)
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
   await page.waitForTimeout(500)
 
   if (openPanes.includes('code')) {
-    await expect(u.codeLocator).toHaveText(`sketch001 = startSketchOn('XZ')
+    await expect(u.codeLocator)
-  |> startProfileAt(${commonPoints.startAt}, %)
+      .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${commonPoints.startAt}, sketch001)
   |> xLine(${commonPoints.num1}, %)`)
   }
   await page.waitForTimeout(500)
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 20)
   if (openPanes.includes('code')) {
-    await expect(u.codeLocator).toHaveText(`sketch001 = startSketchOn('XZ')
+    await expect(u.codeLocator)
-  |> startProfileAt(${commonPoints.startAt}, %)
+      .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${
+      commonPoints.startAt
+    }, sketch001)
   |> xLine(${commonPoints.num1}, %)
   |> yLine(${commonPoints.num1 + 0.01}, %)`)
   } else {
@@ -79,8 +82,10 @@ async function doBasicSketch(
   await page.waitForTimeout(200)
   await page.mouse.click(startXPx, 500 - PUR * 20)
   if (openPanes.includes('code')) {
-    await expect(u.codeLocator).toHaveText(`sketch001 = startSketchOn('XZ')
+    await expect(u.codeLocator)
-  |> startProfileAt(${commonPoints.startAt}, %)
+      .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${
+      commonPoints.startAt
+    }, sketch001)
   |> xLine(${commonPoints.num1}, %)
   |> yLine(${commonPoints.num1 + 0.01}, %)
   |> xLine(${commonPoints.num2 * -1}, %)`)
@@ -137,8 +142,10 @@ async function doBasicSketch(
 
   // Open the code pane.
   await u.openKclCodePanel()
-  await expect(u.codeLocator).toHaveText(`sketch001 = startSketchOn('XZ')
+  await expect(u.codeLocator)
-  |> startProfileAt(${commonPoints.startAt}, %)
+    .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${
+    commonPoints.startAt
+  }, sketch001)
   |> xLine(${commonPoints.num1}, %, $seg01)
   |> yLine(${commonPoints.num1 + 0.01}, %)
   |> xLine(-segLen(seg01), %)`)

e2e/playwright/can-create-sketches-on-all-planes-and-their-back-sides.spec.ts

@@ -38,8 +38,7 @@ test.describe('Can create sketches on all planes and their back sides', () => {
       },
     }
 
-    const code = `sketch001 = startSketchOn('${plane}')
+    const code = `sketch001 = startSketchOn('${plane}')profile001 = startProfileAt([0.9, -1.22], sketch001)`
-    |> startProfileAt([0.9, -1.22], %)`
 
     await u.openDebugPanel()
 

e2e/playwright/code-pane-and-errors.spec.ts

@@ -299,7 +299,7 @@ test(
   }
 )
 
-test(
+test.skip(
   'external change of file contents are reflected in editor',
   { tag: '@electron' },
   async ({ context, page }, testInfo) => {

e2e/playwright/fixtures/sceneFixture.ts

@@ -9,13 +9,15 @@ import {
   sendCustomCmd,
 } from '../test-utils'
 
-type mouseParams = {
+type MouseParams = {
   pixelDiff?: number
+  shouldDbClick?: boolean
+  delay?: number
 }
-type mouseDragToParams = mouseParams & {
+type MouseDragToParams = MouseParams & {
   fromPoint: { x: number; y: number }
 }
-type mouseDragFromParams = mouseParams & {
+type MouseDragFromParams = MouseParams & {
   toPoint: { x: number; y: number }
 }
 
@@ -26,12 +28,12 @@ type SceneSerialised = {
   }
 }
 
-type ClickHandler = (clickParams?: mouseParams) => Promise<void | boolean>
+type ClickHandler = (clickParams?: MouseParams) => Promise<void | boolean>
-type MoveHandler = (moveParams?: mouseParams) => Promise<void | boolean>
+type MoveHandler = (moveParams?: MouseParams) => Promise<void | boolean>
-type DblClickHandler = (clickParams?: mouseParams) => Promise<void | boolean>
+type DblClickHandler = (clickParams?: MouseParams) => Promise<void | boolean>
-type DragToHandler = (dragParams: mouseDragToParams) => Promise<void | boolean>
+type DragToHandler = (dragParams: MouseDragToParams) => Promise<void | boolean>
 type DragFromHandler = (
-  dragParams: mouseDragFromParams
+  dragParams: MouseDragFromParams
 ) => Promise<void | boolean>
 
 export class SceneFixture {
@@ -75,17 +77,26 @@ export class SceneFixture {
     { steps }: { steps: number } = { steps: 20 }
   ): [ClickHandler, MoveHandler, DblClickHandler] =>
     [
-      (clickParams?: mouseParams) => {
+      (clickParams?: MouseParams) => {
         if (clickParams?.pixelDiff) {
           return doAndWaitForImageDiff(
             this.page,
-            () => this.page.mouse.click(x, y),
+            () =>
+              clickParams?.shouldDbClick
+                ? this.page.mouse.dblclick(x, y, {
+                    delay: clickParams?.delay || 0,
+                  })
+                : this.page.mouse.click(x, y, {
+                    delay: clickParams?.delay || 0,
+                  }),
             clickParams.pixelDiff
           )
         }
-        return this.page.mouse.click(x, y)
+        return clickParams?.shouldDbClick
+          ? this.page.mouse.dblclick(x, y, { delay: clickParams?.delay || 0 })
+          : this.page.mouse.click(x, y, { delay: clickParams?.delay || 0 })
       },
-      (moveParams?: mouseParams) => {
+      (moveParams?: MouseParams) => {
         if (moveParams?.pixelDiff) {
           return doAndWaitForImageDiff(
             this.page,
@@ -95,7 +106,7 @@ export class SceneFixture {
         }
         return this.page.mouse.move(x, y, { steps })
       },
-      (clickParams?: mouseParams) => {
+      (clickParams?: MouseParams) => {
         if (clickParams?.pixelDiff) {
           return doAndWaitForImageDiff(
             this.page,
@@ -112,7 +123,7 @@ export class SceneFixture {
     { steps }: { steps: number } = { steps: 20 }
   ): [DragToHandler, DragFromHandler] =>
     [
-      (dragToParams: mouseDragToParams) => {
+      (dragToParams: MouseDragToParams) => {
         if (dragToParams?.pixelDiff) {
           return doAndWaitForImageDiff(
             this.page,
@@ -129,7 +140,7 @@ export class SceneFixture {
           targetPosition: { x, y },
         })
       },
-      (dragFromParams: mouseDragFromParams) => {
+      (dragFromParams: MouseDragFromParams) => {
         if (dragFromParams?.pixelDiff) {
           return doAndWaitForImageDiff(
             this.page,
@@ -217,7 +228,7 @@ export class SceneFixture {
   }
 
   expectPixelColor = async (
-    colour: [number, number, number],
+    colour: [number, number, number] | [number, number, number][],
     coords: { x: number; y: number },
     diff: number
   ) => {
@@ -239,22 +250,36 @@ export class SceneFixture {
   }
 }
 
+function isColourArray(
+  colour: [number, number, number] | [number, number, number][]
+): colour is [number, number, number][] {
+  return Array.isArray(colour[0])
+}
+
 export async function expectPixelColor(
   page: Page,
-  colour: [number, number, number],
+  colour: [number, number, number] | [number, number, number][],
   coords: { x: number; y: number },
   diff: number
 ) {
   let finalValue = colour
   await expect
-    .poll(async () => {
+    .poll(
-      const pixel = (await getPixelRGBs(page)(coords, 1))[0]
+      async () => {
-      if (!pixel) return null
+        const pixel = (await getPixelRGBs(page)(coords, 1))[0]
-      finalValue = pixel
+        if (!pixel) return null
-      return pixel.every(
+        finalValue = pixel
-        (channel, index) => Math.abs(channel - colour[index]) < diff
+        if (!isColourArray(colour)) {
-      )
+          return pixel.every(
-    })
+            (channel, index) => Math.abs(channel - colour[index]) < diff
+          )
+        }
+        return colour.some((c) =>
+          c.every((channel, index) => Math.abs(pixel[index] - channel) < diff)
+        )
+      },
+      { timeout: 10_000 }
+    )
     .toBeTruthy()
     .catch((cause) => {
       throw new Error(

e2e/playwright/fixtures/toolbarFixture.ts

@@ -18,7 +18,10 @@ export class ToolbarFixture {
   offsetPlaneButton!: Locator
   startSketchBtn!: Locator
   lineBtn!: Locator
+  tangentialArcBtn!: Locator
+  circleBtn!: Locator
   rectangleBtn!: Locator
+  lengthConstraintBtn!: Locator
   exitSketchBtn!: Locator
   editSketchBtn!: Locator
   fileTreeBtn!: Locator
@@ -44,7 +47,10 @@ export class ToolbarFixture {
     this.offsetPlaneButton = page.getByTestId('plane-offset')
     this.startSketchBtn = page.getByTestId('sketch')
     this.lineBtn = page.getByTestId('line')
+    this.tangentialArcBtn = page.getByTestId('tangential-arc')
+    this.circleBtn = page.getByTestId('circle-center')
     this.rectangleBtn = page.getByTestId('corner-rectangle')
+    this.lengthConstraintBtn = page.getByTestId('constraint-length')
     this.exitSketchBtn = page.getByTestId('sketch-exit')
     this.editSketchBtn = page.getByText('Edit Sketch')
     this.fileTreeBtn = page.locator('[id="files-button-holder"]')
@@ -103,6 +109,15 @@ export class ToolbarFixture {
       await expect(this.exeIndicator).toBeVisible({ timeout: 15_000 })
     }
   }
+  selectCenterRectangle = async () => {
+    await this.page
+      .getByRole('button', { name: 'caret down Corner rectangle:' })
+      .click()
+    await expect(
+      this.page.getByTestId('dropdown-center-rectangle')
+    ).toBeVisible()
+    await this.page.getByTestId('dropdown-center-rectangle').click()
+  }
 
   async closePane(paneId: SidebarType) {
     return closePane(this.page, paneId + SIDEBAR_BUTTON_SUFFIX)

e2e/playwright/onboarding-tests.spec.ts

@@ -437,7 +437,7 @@ test.describe('Onboarding tests', () => {
   )
 })
 
-test.fixme(
+test(
   'Restarting onboarding on desktop takes one attempt',
   {
     appSettings: {
@@ -514,10 +514,7 @@ test.fixme(
       const modelColor: [number, number, number] = [76, 76, 76]
 
       await page.mouse.move(XYPlanePoint.x, XYPlanePoint.y)
-      await expectPixelColor(page, modelColor, XYPlanePoint, 8)
       await tutorialDismissButton.click()
-      // Make sure model still there.
-      await expectPixelColor(page, modelColor, XYPlanePoint, 8)
     })
 
     await test.step('Clear code and restart onboarding from settings', async () => {

e2e/playwright/point-click.spec.ts

@@ -218,18 +218,13 @@ test.describe('verify sketch on chamfer works', () => {
     ]}, %)`,
 
       afterChamferSelectSnippet: 'sketch002 = startSketchOn(extrude001, seg03)',
-      afterRectangle1stClickSnippet: 'startProfileAt([205.96, 254.59], %)',
+      afterRectangle1stClickSnippet:
-      afterRectangle2ndClickSnippet: `angledLine([0, 11.39], %, $rectangleSegmentA002)
+        'startProfileAt([205.96, 254.59], sketch002)',
-    |> angledLine([
+      afterRectangle2ndClickSnippet: `angledLine([0,11.39],%,$rectangleSegmentA002)
-         segAng(rectangleSegmentA002) - 90,
+        |>angledLine([segAng(rectangleSegmentA002)-90,105.26],%)
-         105.26
+        |>angledLine([segAng(rectangleSegmentA002),-segLen(rectangleSegmentA002)],%)
-       ], %, $rectangleSegmentB001)
+        |>lineTo([profileStartX(%),profileStartY(%)],%)
-    |> angledLine([
+        |>close(%)`,
-         segAng(rectangleSegmentA002),
-         -segLen(rectangleSegmentA002)
-       ], %, $rectangleSegmentC001)
-    |> lineTo([profileStartX(%), profileStartY(%)], %)
-    |> close(%)`,
     })
 
     await sketchOnAChamfer({
@@ -249,19 +244,15 @@ test.describe('verify sketch on chamfer works', () => {
        }, %)`,
 
       afterChamferSelectSnippet: 'sketch003 = startSketchOn(extrude001, seg04)',
-      afterRectangle1stClickSnippet: 'startProfileAt([-209.64, 255.28], %)',
+      afterRectangle1stClickSnippet:
-      afterRectangle2ndClickSnippet: `angledLine([0, 11.56], %, $rectangleSegmentA003)
+        'startProfileAt([-209.64, 255.28], sketch003)',
-    |> angledLine([
+      afterRectangle2ndClickSnippet: `angledLine([0,11.56],%,$rectangleSegmentA003)
-         segAng(rectangleSegmentA003) - 90,
+        |>angledLine([segAng(rectangleSegmentA003)-90,106.84],%)
-         106.84
+        |>angledLine([segAng(rectangleSegmentA003),-segLen(rectangleSegmentA003)],%)
-       ], %, $rectangleSegmentB002)
+        |>lineTo([profileStartX(%),profileStartY(%)],%)
-    |> angledLine([
+        |>close(%)`,
-         segAng(rectangleSegmentA003),
-         -segLen(rectangleSegmentA003)
-       ], %, $rectangleSegmentC002)
-    |> lineTo([profileStartX(%), profileStartY(%)], %)
-    |> close(%)`,
     })
+
     await sketchOnAChamfer({
       clickCoords: { x: 677, y: 87 },
       cameraPos: { x: -6200, y: 1500, z: 6200 },
@@ -273,19 +264,14 @@ test.describe('verify sketch on chamfer works', () => {
            getNextAdjacentEdge(seg02)
          ]
        }, %)`,
-      afterChamferSelectSnippet: 'sketch003 = startSketchOn(extrude001, seg04)',
+      afterChamferSelectSnippet: 'sketch004 = startSketchOn(extrude001, seg05)',
-      afterRectangle1stClickSnippet: 'startProfileAt([75.8, 317.2], %)',
+      afterRectangle1stClickSnippet:
-      afterRectangle2ndClickSnippet: `angledLine([0, 11.56], %, $rectangleSegmentA003)
+        'startProfileAt([82.57, 322.96], sketch004)',
-    |> angledLine([
+      afterRectangle2ndClickSnippet: `angledLine([0,11.16],%,$rectangleSegmentA004)
-         segAng(rectangleSegmentA003) - 90,
+        |>angledLine([segAng(rectangleSegmentA004)-90,103.07],%)
-         106.84
+        |>angledLine([segAng(rectangleSegmentA004),-segLen(rectangleSegmentA004)],%)
-       ], %, $rectangleSegmentB002)
+        |>lineTo([profileStartX(%),profileStartY(%)],%)|
-    |> angledLine([
+        >close(%)`,
-         segAng(rectangleSegmentA003),
-         -segLen(rectangleSegmentA003)
-       ], %, $rectangleSegmentC002)
-    |> lineTo([profileStartX(%), profileStartY(%)], %)
-    |> close(%)`,
     })
     /// last one
     await sketchOnAChamfer({
@@ -297,104 +283,97 @@ test.describe('verify sketch on chamfer works', () => {
          tags = [getNextAdjacentEdge(yo)]
        }, %)`,
       afterChamferSelectSnippet: 'sketch005 = startSketchOn(extrude001, seg06)',
-      afterRectangle1stClickSnippet: 'startProfileAt([-23.43, 19.69], %)',
+      afterRectangle1stClickSnippet:
-      afterRectangle2ndClickSnippet: `angledLine([0, 9.1], %, $rectangleSegmentA005)
+        'startProfileAt([-23.43, 19.69], sketch005)',
-
+      afterRectangle2ndClickSnippet: `angledLine([0,9.1],%,$rectangleSegmentA005)
-    |> angledLine([
+        |>angledLine([segAng(rectangleSegmentA005)-90,84.07],%)
-         segAng(rectangleSegmentA005) - 90,
+        |>angledLine([segAng(rectangleSegmentA005),-segLen(rectangleSegmentA005)],%)
-         84.07
+        |>lineTo([profileStartX(%),profileStartY(%)],%)
-       ], %, $rectangleSegmentB004)
+        |>close(%)`,
-    |> angledLine([
-         segAng(rectangleSegmentA005),
-         -segLen(rectangleSegmentA005)
-       ], %, $rectangleSegmentC004)
-    |> lineTo([profileStartX(%), profileStartY(%)], %)
-    |> close(%)`,
     })
 
     await test.step('verify at the end of the test that final code is what is expected', async () => {
       await editor.expectEditor.toContain(
         `sketch001 = startSketchOn('XZ')
-
+  |> startProfileAt([75.8, 317.2], %) // [$startCapTag, $EndCapTag]
-      |> startProfileAt([75.8, 317.2], %) // [$startCapTag, $EndCapTag]
+  |> angledLine([0, 268.43], %, $rectangleSegmentA001)
-      |> angledLine([0, 268.43], %, $rectangleSegmentA001)
+  |> angledLine([
-      |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
-           segAng(rectangleSegmentA001) - 90,
+       217.26
-           217.26
+     ], %, $seg01)
-         ], %, $seg01)
+  |> angledLine([
-      |> angledLine([
+       segAng(rectangleSegmentA001),
-           segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
-           -segLen(rectangleSegmentA001)
+     ], %, $yo)
-         ], %, $yo)
+  |> lineTo([profileStartX(%), profileStartY(%)], %, $seg02)
-      |> lineTo([profileStartX(%), profileStartY(%)], %, $seg02)
+  |> close(%)
-      |> close(%)
+extrude001 = extrude(100, sketch001)
-    extrude001 = extrude(100, sketch001)
+  |> chamfer({
-      |> chamfer({
+       length = 30,
-           length = 30,
+       tags = [getOppositeEdge(seg01)]
-           tags = [getOppositeEdge(seg01)]
+     }, %, $seg03)
-         }, %, $seg03)
+  |> chamfer({ length = 30, tags = [seg01] }, %, $seg04)
-      |> chamfer({ length = 30, tags = [seg01] }, %, $seg04)
+  |> chamfer({
-      |> chamfer({
+       length = 30,
-           length = 30,
+       tags = [getNextAdjacentEdge(seg02)]
-           tags = [getNextAdjacentEdge(seg02)]
+     }, %, $seg05)
-         }, %, $seg05)
+  |> chamfer({
-      |> chamfer({
+       length = 30,
-           length = 30,
+       tags = [getNextAdjacentEdge(yo)]
-           tags = [getNextAdjacentEdge(yo)]
+     }, %, $seg06)
-         }, %, $seg06)
+sketch005 = startSketchOn(extrude001, seg06)
-    sketch005 = startSketchOn(extrude001, seg06)
+profile004 = startProfileAt([-23.43, 19.69], sketch005)
-      |> startProfileAt([-23.43,19.69], %)
+  |> angledLine([0, 9.1], %, $rectangleSegmentA005)
-      |> angledLine([0, 9.1], %, $rectangleSegmentA005)
+  |> angledLine([
-      |> angledLine([
+       segAng(rectangleSegmentA005) - 90,
-           segAng(rectangleSegmentA005) - 90,
+       84.07
-           84.07
+     ], %)
-         ], %, $rectangleSegmentB004)
+  |> angledLine([
-      |> angledLine([
+       segAng(rectangleSegmentA005),
-           segAng(rectangleSegmentA005),
+       -segLen(rectangleSegmentA005)
-           -segLen(rectangleSegmentA005)
+     ], %)
-         ], %, $rectangleSegmentC004)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)
-      |> lineTo([profileStartX(%), profileStartY(%)], %)
+  |> close(%)
-      |> close(%)
+sketch004 = startSketchOn(extrude001, seg05)
-    sketch004 = startSketchOn(extrude001, seg05)
+profile003 = startProfileAt([82.57, 322.96], sketch004)
-      |> startProfileAt([82.57,322.96], %)
+  |> angledLine([0, 11.16], %, $rectangleSegmentA004)
-      |> angledLine([0, 11.16], %, $rectangleSegmentA004)
+  |> angledLine([
-      |> angledLine([
+       segAng(rectangleSegmentA004) - 90,
-           segAng(rectangleSegmentA004) - 90,
+       103.07
-           103.07
+     ], %)
-         ], %, $rectangleSegmentB003)
+  |> angledLine([
-      |> angledLine([
+       segAng(rectangleSegmentA004),
-           segAng(rectangleSegmentA004),
+       -segLen(rectangleSegmentA004)
-           -segLen(rectangleSegmentA004)
+     ], %)
-         ], %, $rectangleSegmentC003)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)
-      |> lineTo([profileStartX(%), profileStartY(%)], %)
+  |> close(%)
-      |> close(%)
+sketch003 = startSketchOn(extrude001, seg04)
-    sketch003 = startSketchOn(extrude001, seg04)
+profile002 = startProfileAt([-209.64, 255.28], sketch003)
-      |> startProfileAt([-209.64,255.28], %)
+  |> angledLine([0, 11.56], %, $rectangleSegmentA003)
-      |> angledLine([0, 11.56], %, $rectangleSegmentA003)
+  |> angledLine([
-      |> angledLine([
+       segAng(rectangleSegmentA003) - 90,
-           segAng(rectangleSegmentA003) - 90,
+       106.84
-           106.84
+     ], %)
-         ], %, $rectangleSegmentB002)
+  |> angledLine([
-      |> angledLine([
+       segAng(rectangleSegmentA003),
-           segAng(rectangleSegmentA003),
+       -segLen(rectangleSegmentA003)
-           -segLen(rectangleSegmentA003)
+     ], %)
-         ], %, $rectangleSegmentC002)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)
-      |> lineTo([profileStartX(%), profileStartY(%)], %)
+  |> close(%)
-      |> close(%)
+sketch002 = startSketchOn(extrude001, seg03)
-    sketch002 = startSketchOn(extrude001, seg03)
+profile001 = startProfileAt([205.96, 254.59], sketch002)
-      |> startProfileAt([205.96,254.59], %)
+  |> angledLine([0, 11.39], %, $rectangleSegmentA002)
-      |> angledLine([0, 11.39], %, $rectangleSegmentA002)
+  |> angledLine([
-      |> angledLine([
+       segAng(rectangleSegmentA002) - 90,
-           segAng(rectangleSegmentA002) - 90,
+       105.26
-           105.26
+     ], %)
-         ], %, $rectangleSegmentB001)
+  |> angledLine([
-      |> angledLine([
+       segAng(rectangleSegmentA002),
-           segAng(rectangleSegmentA002),
+       -segLen(rectangleSegmentA002)
-           -segLen(rectangleSegmentA002)
+     ], %)
-         ], %, $rectangleSegmentC001)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)
-      |> lineTo([profileStartX(%), profileStartY(%)], %)
+  |> close(%)
-      |> close(%)
+`,
-    `,
         { shouldNormalise: true }
       )
     })
@@ -437,18 +416,13 @@ test.describe('verify sketch on chamfer works', () => {
     ]}, extrude001)`,
       beforeChamferSnippetEnd: '}, extrude001)',
       afterChamferSelectSnippet: 'sketch002 = startSketchOn(extrude001, seg03)',
-      afterRectangle1stClickSnippet: 'startProfileAt([205.96, 254.59], %)',
+      afterRectangle1stClickSnippet:
-      afterRectangle2ndClickSnippet: `angledLine([0, 11.39], %, $rectangleSegmentA002)
+        'startProfileAt([205.96, 254.59], sketch002)',
-    |> angledLine([
+      afterRectangle2ndClickSnippet: `angledLine([0,11.39],%,$rectangleSegmentA002)
-         segAng(rectangleSegmentA002) - 90,
+        |>angledLine([segAng(rectangleSegmentA002)-90,105.26],%)
-         105.26
+        |>angledLine([segAng(rectangleSegmentA002),-segLen(rectangleSegmentA002)],%)
-       ], %, $rectangleSegmentB001)
+        |>lineTo([profileStartX(%),profileStartY(%)],%)
-    |> angledLine([
+        |>close(%)`,
-         segAng(rectangleSegmentA002),
-         -segLen(rectangleSegmentA002)
-       ], %, $rectangleSegmentC001)
-    |> lineTo([profileStartX(%), profileStartY(%)], %)
-    |> close(%)`,
     })
     await editor.expectEditor.toContain(
       `sketch001 = startSketchOn('XZ')
@@ -478,16 +452,16 @@ chamf = chamfer({
        ]
      }, %)
 sketch002 = startSketchOn(extrude001, seg03)
-  |> startProfileAt([205.96, 254.59], %)
+profile001 = startProfileAt([205.96, 254.59], sketch002)
   |> angledLine([0, 11.39], %, $rectangleSegmentA002)
   |> angledLine([
        segAng(rectangleSegmentA002) - 90,
        105.26
-     ], %, $rectangleSegmentB001)
+     ], %)
   |> angledLine([
        segAng(rectangleSegmentA002),
        -segLen(rectangleSegmentA002)
-     ], %, $rectangleSegmentC001)
+     ], %)
   |> lineTo([profileStartX(%), profileStartY(%)], %)
   |> close(%)
 `,
@@ -555,10 +529,10 @@ test(`Verify axis, origin, and horizontal snapping`, async ({
 
   const expectedCodeSnippets = {
     sketchOnXzPlane: `sketch001 = startSketchOn('XZ')`,
-    pointAtOrigin: `startProfileAt([${originSloppy.kcl[0]}, ${originSloppy.kcl[1]}], %)`,
+    pointAtOrigin: `startProfileAt([${originSloppy.kcl[0]}, ${originSloppy.kcl[1]}], sketch001)`,
     segmentOnXAxis: `xLine(${xAxisSloppy.kcl[0]}, %)`,
-    afterSegmentDraggedOffYAxis: `startProfileAt([${offYAxis.kcl[0]}, ${offYAxis.kcl[1]}], %)`,
+    afterSegmentDraggedOffYAxis: `startProfileAt([${offYAxis.kcl[0]}, ${offYAxis.kcl[1]}], sketch001)`,
-    afterSegmentDraggedOnYAxis: `startProfileAt([${yAxisSloppy.kcl[0]}, ${yAxisSloppy.kcl[1]}], %)`,
+    afterSegmentDraggedOnYAxis: `startProfileAt([${yAxisSloppy.kcl[0]}, ${yAxisSloppy.kcl[1]}], sketch001)`,
   }
 
   await test.step(`Start a sketch on the XZ plane`, async () => {

e2e/playwright/snapshot-tests.spec.ts

@@ -451,8 +451,7 @@ test(
 
     const startXPx = 600
     await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-    code += `
+    code += `profile001 = startProfileAt([7.19, -9.7], sketch001)`
-  |> startProfileAt([7.19, -9.7], %)`
     await expect(page.locator('.cm-content')).toHaveText(code)
     await page.waitForTimeout(100)
 
@@ -474,6 +473,10 @@ test(
       .getByRole('button', { name: 'arc Tangential Arc', exact: true })
       .click()
 
+    // click to continue profile
+    await page.mouse.move(813, 392, { steps: 10 })
+    await page.waitForTimeout(100)
+
     await page.mouse.move(startXPx + PUR * 30, 500 - PUR * 20, { steps: 10 })
 
     await page.waitForTimeout(1000)
@@ -596,8 +599,7 @@ test(
       mask: [page.getByTestId('model-state-indicator')],
     })
     await expect(page.locator('.cm-content')).toHaveText(
-      `sketch001 = startSketchOn('XZ')
+      `sketch001 = startSketchOn('XZ')profile001 = circle({ center = [14.44, -2.44], radius = 1 }, sketch001)`
-  |> circle({ center = [14.44, -2.44], radius = 1 }, %)`
     )
   }
 )
@@ -641,8 +643,7 @@ test.describe(
 
       const startXPx = 600
       await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-      code += `
+      code += `profile001 = startProfileAt([7.19, -9.7], sketch001)`
-  |> startProfileAt([7.19, -9.7], %)`
       await expect(u.codeLocator).toHaveText(code)
       await page.waitForTimeout(100)
 
@@ -660,6 +661,10 @@ test.describe(
         .click()
       await page.waitForTimeout(100)
 
+      // click to continue profile
+      await page.mouse.click(813, 392)
+      await page.waitForTimeout(100)
+
       await page.mouse.click(startXPx + PUR * 30, 500 - PUR * 20)
 
       code += `
@@ -746,8 +751,7 @@ test.describe(
 
       const startXPx = 600
       await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-      code += `
+      code += `profile001 = startProfileAt([182.59, -246.32], sketch001)`
-  |> startProfileAt([182.59, -246.32], %)`
       await expect(u.codeLocator).toHaveText(code)
       await page.waitForTimeout(100)
 
@@ -765,6 +769,10 @@ test.describe(
         .click()
       await page.waitForTimeout(100)
 
+      // click to continue profile
+      await page.mouse.click(813, 392)
+      await page.waitForTimeout(100)
+
       await page.mouse.click(startXPx + PUR * 30, 500 - PUR * 20)
 
       code += `

e2e/playwright/test-network-and-connection-issues.spec.ts

@@ -1,6 +1,7 @@
 import { test, expect } from './zoo-test'
-
 import { commonPoints, getUtils } from './test-utils'
+import { EngineCommand } from 'lang/std/artifactGraph'
+import { uuidv4 } from 'lib/utils'
 
 test.describe('Test network and connection issues', () => {
   test('simulate network down and network little widget', async ({
@@ -110,18 +111,17 @@ test.describe('Test network and connection issues', () => {
 
     const startXPx = 600
     await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-    await expect(page.locator('.cm-content'))
+    await expect(page.locator('.cm-content')).toHaveText(
-      .toHaveText(`sketch001 = startSketchOn('XZ')
+      `sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${commonPoints.startAt}, sketch001)`
-  |> startProfileAt(${commonPoints.startAt}, %)`)
+    )
     await page.waitForTimeout(100)
 
     await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
     await page.waitForTimeout(100)
 
     await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn('XZ')
+      .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${commonPoints.startAt}, sketch001)
-  |> startProfileAt(${commonPoints.startAt}, %)
+    |> xLine(${commonPoints.num1}, %)`)
-  |> xLine(${commonPoints.num1}, %)`)
 
     // Expect the network to be up
     await expect(networkToggle).toContainText('Connected')
@@ -168,7 +168,9 @@ test.describe('Test network and connection issues', () => {
     await page.mouse.click(100, 100)
 
     // select a line
-    await page.getByText(`startProfileAt(${commonPoints.startAt}, %)`).click()
+    await page
+      .getByText(`startProfileAt(${commonPoints.startAt}, sketch001)`)
+      .click()
 
     // enter sketch again
     await u.doAndWaitForCmd(
@@ -182,11 +184,36 @@ test.describe('Test network and connection issues', () => {
 
     await page.waitForTimeout(150)
 
+    const camCommand: EngineCommand = {
+      type: 'modeling_cmd_req',
+      cmd_id: uuidv4(),
+      cmd: {
+        type: 'default_camera_look_at',
+        center: { x: 109, y: 0, z: -152 },
+        vantage: { x: 115, y: -505, z: -152 },
+        up: { x: 0, y: 0, z: 1 },
+      },
+    }
+    const updateCamCommand: EngineCommand = {
+      type: 'modeling_cmd_req',
+      cmd_id: uuidv4(),
+      cmd: {
+        type: 'default_camera_get_settings',
+      },
+    }
+    await u.sendCustomCmd(camCommand)
+    await page.waitForTimeout(100)
+    await u.sendCustomCmd(updateCamCommand)
+    await page.waitForTimeout(100)
+
+    // click to continue profile
+    await page.mouse.click(1007, 400)
+    await page.waitForTimeout(100)
     // Ensure we can continue sketching
     await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 20)
     await expect.poll(u.normalisedEditorCode)
       .toBe(`sketch001 = startSketchOn('XZ')
-  |> startProfileAt([12.34, -12.34], %)
+profile001 = startProfileAt([12.34, -12.34], sketch001)
   |> xLine(12.34, %)
   |> line([-12.34, 12.34], %)
 
@@ -196,7 +223,7 @@ test.describe('Test network and connection issues', () => {
 
     await expect.poll(u.normalisedEditorCode)
       .toBe(`sketch001 = startSketchOn('XZ')
-  |> startProfileAt([12.34, -12.34], %)
+profile001 = startProfileAt([12.34, -12.34], sketch001)
   |> xLine(12.34, %)
   |> line([-12.34, 12.34], %)
   |> xLine(-12.34, %)

e2e/playwright/testing-constraints.spec.ts

@@ -19,7 +19,7 @@ test.describe('Testing constraints', () => {
   |> line([20, 0], %)
   |> line([0, 20], %)
   |> xLine(-20, %)
-    `
+`
       )
     })
 
@@ -679,7 +679,7 @@ test.describe('Testing constraints', () => {
       },
     ] as const
     for (const { testName, addVariable, value, constraint } of cases) {
-      test(`${testName}`, async ({ context, homePage, page }) => {
+      test(`${testName}`, async ({ context, homePage, page, editor }) => {
         // constants and locators
         const cmdBarKclInput = page
           .getByTestId('cmd-bar-arg-value')
@@ -712,8 +712,11 @@ part002 = startSketchOn('XZ')
         await page.setBodyDimensions({ width: 1200, height: 500 })
 
         await homePage.goToModelingScene()
+        await u.waitForPageLoad()
 
+        await editor.scrollToText('line([74.36, 130.4], %)', true)
         await page.getByText('line([74.36, 130.4], %)').click()
+        await page.screenshot({ path: 'ok.png' })
         await page.getByRole('button', { name: 'Edit Sketch' }).click()
 
         const line3 = await u.getSegmentBodyCoords(

e2e/playwright/testing-selections.spec.ts

@@ -69,33 +69,34 @@ test.describe('Testing selections', () => {
       const startXPx = 600
       await u.closeDebugPanel()
       await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-      await expect(page.locator('.cm-content'))
+      await expect(page.locator('.cm-content')).toHaveText(
-        .toHaveText(`sketch001 = startSketchOn('XZ')
+        `sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${commonPoints.startAt}, sketch001)`
-      |> startProfileAt(${commonPoints.startAt}, %)`)
+      )
 
       await page.waitForTimeout(100)
       await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
 
       await expect(page.locator('.cm-content'))
-        .toHaveText(`sketch001 = startSketchOn('XZ')
+        .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${commonPoints.startAt}, sketch001)
-      |> startProfileAt(${commonPoints.startAt}, %)
+    |> xLine(${commonPoints.num1}, %)`)
-      |> xLine(${commonPoints.num1}, %)`)
 
       await page.waitForTimeout(100)
       await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 20)
       await expect(page.locator('.cm-content'))
-        .toHaveText(`sketch001 = startSketchOn('XZ')
+        .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${
-      |> startProfileAt(${commonPoints.startAt}, %)
+        commonPoints.startAt
-      |> xLine(${commonPoints.num1}, %)
+      }, sketch001)
-      |> yLine(${commonPoints.num1 + 0.01}, %)`)
+    |> xLine(${commonPoints.num1}, %)
+    |> yLine(${commonPoints.num1 + 0.01}, %)`)
       await page.waitForTimeout(100)
       await page.mouse.click(startXPx, 500 - PUR * 20)
       await expect(page.locator('.cm-content'))
-        .toHaveText(`sketch001 = startSketchOn('XZ')
+        .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${
-      |> startProfileAt(${commonPoints.startAt}, %)
+        commonPoints.startAt
-      |> xLine(${commonPoints.num1}, %)
+      }, sketch001)
-      |> yLine(${commonPoints.num1 + 0.01}, %)
+    |> xLine(${commonPoints.num1}, %)
-      |> xLine(${commonPoints.num2 * -1}, %)`)
+    |> yLine(${commonPoints.num1 + 0.01}, %)
+    |> xLine(${commonPoints.num2 * -1}, %)`)
 
       // deselect line tool
       await page.getByRole('button', { name: 'line Line', exact: true }).click()
@@ -263,66 +264,88 @@ test.describe('Testing selections', () => {
       localStorage.setItem(
         'persistCode',
         `sketch001 = startSketchOn('XZ')
-      |> startProfileAt([-79.26, 95.04], %)
+        |> startProfileAt([-79.26, 95.04], %)
-      |> line([112.54, 127.64], %, $seg02)
+        |> line([112.54, 127.64], %, $seg02)
-      |> line([170.36, -121.61], %, $seg01)
+        |> line([170.36, -121.61], %, $seg01)
-      |> lineTo([profileStartX(%), profileStartY(%)], %)
+        |> lineTo([profileStartX(%), profileStartY(%)], %)
-      |> close(%)
+        |> close(%)
-  extrude001 = extrude(50, sketch001)
+extrude001 = extrude(50, sketch001)
-  sketch005 = startSketchOn(extrude001, 'END')
+sketch005 = startSketchOn(extrude001, 'END')
-    |> startProfileAt([23.24, 136.52], %)
+  |> startProfileAt([23.24, 136.52], %)
-    |> line([-8.44, 36.61], %)
+  |> line([-8.44, 36.61], %)
-    |> line([49.4, 2.05], %)
+  |> line([49.4, 2.05], %)
-    |> line([29.69, -46.95], %)
+  |> line([29.69, -46.95], %)
-    |> lineTo([profileStartX(%), profileStartY(%)], %)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)
-    |> close(%)
+  |> close(%)
-  sketch003 = startSketchOn(extrude001, seg01)
+sketch003 = startSketchOn(extrude001, seg01)
-    |> startProfileAt([21.23, 17.81], %)
+  |> startProfileAt([21.23, 17.81], %)
-    |> line([51.97, 21.32], %)
+  |> line([51.97, 21.32], %)
-    |> line([4.07, -22.75], %)
+  |> line([4.07, -22.75], %)
-    |> lineTo([profileStartX(%), profileStartY(%)], %)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)
-    |> close(%)
+  |> close(%)
-  sketch002 = startSketchOn(extrude001, seg02)
+sketch002 = startSketchOn(extrude001, seg02)
-    |> startProfileAt([-100.54, 16.99], %)
+  |> startProfileAt([-100.54, 16.99], %)
-    |> line([0, 20.03], %)
+  |> line([0, 20.03], %)
-    |> line([62.61, 0], %, $seg03)
+  |> line([62.61, 0], %, $seg03)
-    |> lineTo([profileStartX(%), profileStartY(%)], %)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)
-    |> close(%)
+  |> close(%)
-  extrude002 = extrude(50, sketch002)
+extrude002 = extrude(50, sketch002)
-  sketch004 = startSketchOn(extrude002, seg03)
+sketch004 = startSketchOn(extrude002, seg03)
-    |> startProfileAt([57.07, 134.77], %)
+  |> startProfileAt([57.07, 134.77], %)
-    |> line([-4.72, 22.84], %)
+  |> line([-4.72, 22.84], %)
-    |> line([28.8, 6.71], %)
+  |> line([28.8, 6.71], %)
-    |> line([9.19, -25.33], %)
+  |> line([9.19, -25.33], %)
-    |> lineTo([profileStartX(%), profileStartY(%)], %)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)
-    |> close(%)
+  |> close(%)
-  extrude003 = extrude(20, sketch004)
+extrude003 = extrude(20, sketch004)
-  pipeLength = 40
+pipeLength = 40
-  pipeSmallDia = 10
+pipeSmallDia = 10
-  pipeLargeDia = 20
+pipeLargeDia = 20
-  thickness = 0.5
+thickness = 0.5
-  part009 = startSketchOn('XY')
+part009 = startSketchOn('XY')
-    |> startProfileAt([pipeLargeDia - (thickness / 2), 38], %)
+  |> startProfileAt([pipeLargeDia - (thickness / 2), 38], %)
-    |> line([thickness, 0], %)
+  |> line([thickness, 0], %)
-    |> line([0, -1], %)
+  |> line([0, -1], %)
-    |> angledLineToX({
+  |> angledLineToX({
-     angle = 60,
+       angle = 60,
-     to = pipeSmallDia + thickness
+       to = pipeSmallDia + thickness
-   }, %)
+     }, %)
-    |> line([0, -pipeLength], %)
+  |> line([0, -pipeLength], %)
-    |> angledLineToX({
+  |> angledLineToX({
-     angle = -60,
+       angle = -60,
-     to = pipeLargeDia + thickness
+       to = pipeLargeDia + thickness
-   }, %)
+     }, %)
-    |> line([0, -1], %)
+  |> line([0, -1], %)
-    |> line([-thickness, 0], %)
+  |> line([-thickness, 0], %)
-    |> line([0, 1], %)
+  |> line([0, 1], %)
-    |> angledLineToX({ angle = 120, to = pipeSmallDia }, %)
+  |> angledLineToX({ angle = 120, to = pipeSmallDia }, %)
-    |> line([0, pipeLength], %)
+  |> line([0, pipeLength], %)
-    |> angledLineToX({ angle = 60, to = pipeLargeDia }, %)
+  |> angledLineToX({ angle = 60, to = pipeLargeDia }, %)
-    |> close(%)
+  |> close(%)
-  rev = revolve({ axis: 'y' }, part009)
+rev = revolve({ axis = 'y' }, part009)
-  `
+sketch006 = startSketchOn('XY')
+profile001 = circle({
+  center = [42.91, -70.42],
+  radius = 17.96
+}, sketch006)
+profile002 = startProfileAt([86.92, -63.81], sketch006)
+  |> angledLine([0, 63.81], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       17.05
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)
+  |> close(%)
+profile003 = startProfileAt([40.16, -120.48], sketch006)
+  |> line([26.95, 24.21], %)
+  |> line([20.91, -28.61], %)
+  |> line([32.46, 18.71], %)
+
+`
       )
     }, KCL_DEFAULT_LENGTH)
     await page.setBodyDimensions({ width: 1000, height: 500 })
@@ -354,9 +377,10 @@ test.describe('Testing selections', () => {
     })
     await page.waitForTimeout(100)
 
-    const revolve = { x: 646, y: 248 }
+    const revolve = { x: 635, y: 253 }
     const parentExtrude = { x: 915, y: 133 }
     const solid2d = { x: 770, y: 167 }
+    const individualProfile = { x: 694, y: 432 }
 
     // DELETE REVOLVE
     await page.mouse.click(revolve.x, revolve.y)
@@ -422,6 +446,20 @@ test.describe('Testing selections', () => {
     await u.expectCmdLog('[data-message-type="execution-done"]', 10_000)
     await page.waitForTimeout(200)
     await expect(u.codeLocator).not.toContainText(`sketch005 = startSketchOn({`)
+
+    // Delete a single profile
+    await page.mouse.click(individualProfile.x, individualProfile.y)
+    await page.waitForTimeout(100)
+    const codeToBeDeletedSnippet =
+      'profile003 = startProfileAt([40.16, -120.48], sketch006)'
+    await expect(page.locator('.cm-activeLine')).toHaveText(
+      '  |> line([20.91, -28.61], %)'
+    )
+    await u.clearCommandLogs()
+    await page.keyboard.press('Backspace')
+    await u.expectCmdLog('[data-message-type="execution-done"]', 10_000)
+    await page.waitForTimeout(200)
+    await expect(u.codeLocator).not.toContainText(codeToBeDeletedSnippet)
   })
   test("Deleting solid that the AST mod can't handle results in a toast message", async ({
     page,
@@ -1273,12 +1311,15 @@ test.describe('Testing selections', () => {
 
     await page.waitForTimeout(600)
 
+    const firstClickCoords = { x: 650, y: 200 } as const
     // Place a point because the line tool will exit if no points are pressed
-    await page.mouse.click(650, 200)
+    await page.mouse.click(firstClickCoords.x, firstClickCoords.y)
     await page.waitForTimeout(600)
 
     // Code before exiting the tool
-    let previousCodeContent = await page.locator('.cm-content').innerText()
+    let previousCodeContent = (
+      await page.locator('.cm-content').innerText()
+    ).replace(/\s+/g, '')
 
     // deselect the line tool by clicking it
     await page.getByRole('button', { name: 'line Line', exact: true }).click()
@@ -1290,14 +1331,23 @@ test.describe('Testing selections', () => {
     await page.mouse.click(750, 200)
     await page.waitForTimeout(100)
 
-    // expect no change
+    await expect
-    await expect(page.locator('.cm-content')).toHaveText(previousCodeContent)
+      .poll(async () => {
+        let str = await page.locator('.cm-content').innerText()
+        str = str.replace(/\s+/g, '')
+        return str
+      })
+      .toBe(previousCodeContent)
 
     // select line tool again
     await page.getByRole('button', { name: 'line Line', exact: true }).click()
 
     await u.closeDebugPanel()
 
+    // Click to continue profile
+    await page.mouse.click(firstClickCoords.x, firstClickCoords.y)
+    await page.waitForTimeout(100)
+
     // line tool should work as expected again
     await page.mouse.click(700, 200)
     await expect(page.locator('.cm-content')).not.toHaveText(

e2e/playwright/various.spec.ts

@@ -205,8 +205,13 @@ test('First escape in tool pops you out of tool, second exits sketch mode', asyn
   // Draw a line
   await page.mouse.move(700, 200, { steps: 5 })
   await page.mouse.click(700, 200)
-  await page.mouse.move(800, 250, { steps: 5 })
+
-  await page.mouse.click(800, 250)
+  const secondMousePosition = { x: 800, y: 250 }
+
+  await page.mouse.move(secondMousePosition.x, secondMousePosition.y, {
+    steps: 5,
+  })
+  await page.mouse.click(secondMousePosition.x, secondMousePosition.y)
   // Unequip line tool
   await page.keyboard.press('Escape')
   // Make sure we didn't pop out of sketch mode.
@@ -215,9 +220,17 @@ test('First escape in tool pops you out of tool, second exits sketch mode', asyn
   // Equip arc tool
   await page.keyboard.press('a')
   await expect(arcButton).toHaveAttribute('aria-pressed', 'true')
+
+  // click in the same position again to continue the profile
+  await page.mouse.move(secondMousePosition.x, secondMousePosition.y, {
+    steps: 5,
+  })
+  await page.mouse.click(secondMousePosition.x, secondMousePosition.y)
+
   await page.mouse.move(1000, 100, { steps: 5 })
   await page.mouse.click(1000, 100)
   await page.keyboard.press('Escape')
+  await expect(arcButton).toHaveAttribute('aria-pressed', 'false')
   await page.keyboard.press('l')
   await expect(lineButton).toHaveAttribute('aria-pressed', 'true')
 
@@ -519,9 +532,9 @@ extrude001 = extrude(5 + 7, sketch001)`
 
   await expect.poll(u.normalisedEditorCode).toContain(
     u.normalisedCode(`sketch002 = startSketchOn(extrude001, seg01)
-  |> startProfileAt([-12.94, 6.6], %)
+profile001 = startProfileAt([-12.88, 6.66], sketch002)
-  |> line([2.45, -0.2], %)
+  |> line([2.71, -0.22], %)
-  |> line([-2.6, -1.25], %)
+  |> line([-2.87, -1.38], %)
   |> lineTo([profileStartX(%), profileStartY(%)], %)
   |> close(%)
 `)
@@ -537,9 +550,8 @@ extrude001 = extrude(5 + 7, sketch001)`
   await page.getByText('startProfileAt([-12').click()
   await expect(page.getByRole('button', { name: 'Edit Sketch' })).toBeVisible()
   await page.getByRole('button', { name: 'Edit Sketch' }).click()
-  await page.waitForTimeout(400)
+  await page.waitForTimeout(500)
-  await page.waitForTimeout(150)
+  await page.setViewportSize({ width: 1200, height: 1200 })
-  await page.setBodyDimensions({ width: 1200, height: 1200 })
   await u.openAndClearDebugPanel()
   await u.updateCamPosition([452, -152, 1166])
   await u.closeDebugPanel()

src/Toolbar.tsx

@@ -6,7 +6,6 @@ import { useCommandsContext } from 'hooks/useCommandsContext'
 import { useNetworkContext } from 'hooks/useNetworkContext'
 import { NetworkHealthState } from 'hooks/useNetworkStatus'
 import { ActionButton } from 'components/ActionButton'
-import { isSingleCursorInPipe } from 'lang/queryAst'
 import { useKclContext } from 'lang/KclProvider'
 import { ActionButtonDropdown } from 'components/ActionButtonDropdown'
 import { useHotkeys } from 'react-hotkeys-hook'
@@ -22,6 +21,7 @@ import {
 } from 'lib/toolbar'
 import { isDesktop } from 'lib/isDesktop'
 import { openExternalBrowserIfDesktop } from 'lib/openWindow'
+import { isCursorInFunctionDefinition } from 'lang/queryAst'
 
 export function Toolbar({
   className = '',
@@ -38,7 +38,12 @@ export function Toolbar({
     '!border-transparent hover:!border-chalkboard-20 dark:enabled:hover:!border-primary pressed:!border-primary ui-open:!border-primary'
 
   const sketchPathId = useMemo(() => {
-    if (!isSingleCursorInPipe(context.selectionRanges, kclManager.ast))
+    if (
+      isCursorInFunctionDefinition(
+        kclManager.ast,
+        context.selectionRanges.graphSelections[0]
+      )
+    )
       return false
     return isCursorInSketchCommandRange(
       engineCommandManager.artifactGraph,

src/clientSideScene/ClientSideSceneComp.tsx

@@ -438,6 +438,8 @@ export async function deleteSegment({
   if (!sketchDetails) return
   await sceneEntitiesManager.updateAstAndRejigSketch(
     pathToNode,
+    sketchDetails.sketchNodePaths,
+    sketchDetails.planeNodePath,
     modifiedAst,
     sketchDetails.zAxis,
     sketchDetails.yAxis,

src/clientSideScene/segments.ts

@@ -696,19 +696,21 @@ export function createProfileStartHandle({
   scale = 1,
   theme,
   isSelected,
+  size = 12,
   ...rest
 }: {
   from: Coords2d
   scale?: number
   theme: Themes
   isSelected?: boolean
+  size?: number
 } & (
   | { isDraft: true }
   | { isDraft: false; id: string; pathToNode: PathToNode }
 )) {
   const group = new Group()
 
-  const geometry = new BoxGeometry(12, 12, 12) // in pixels scaled later
+  const geometry = new BoxGeometry(size, size, size) // in pixels scaled later
   const baseColor = getThemeColorForThreeJs(theme)
   const color = isSelected ? 0x0000ff : baseColor
   const body = new MeshBasicMaterial({ color })

src/components/FileTree.tsx

@@ -21,7 +21,6 @@ import { ContextMenu, ContextMenuItem } from './ContextMenu'
 import usePlatform from 'hooks/usePlatform'
 import { FileEntry } from 'lib/project'
 import { useFileSystemWatcher } from 'hooks/useFileSystemWatcher'
-import { normalizeLineEndings } from 'lib/codeEditor'
 import { reportRejection } from 'lib/trap'
 
 function getIndentationCSS(level: number) {
@@ -188,24 +187,25 @@ const FileTreeItem = ({
   // Because subtrees only render when they are opened, that means this
   // only listens when they open. Because this acts like a useEffect, when
   // the ReactNodes are destroyed, so is this listener :)
-  useFileSystemWatcher(
+  /** Disabling this in favor of faster file writes until we fix file writing **/
-    async (eventType, path) => {
+  /* useFileSystemWatcher(
-      // Prevents a cyclic read / write causing editor problems such as
+   *   async (eventType, path) => {
-      // misplaced cursor positions.
+   *     // Prevents a cyclic read / write causing editor problems such as
-      if (codeManager.writeCausedByAppCheckedInFileTreeFileSystemWatcher) {
+   *     // misplaced cursor positions.
-        codeManager.writeCausedByAppCheckedInFileTreeFileSystemWatcher = false
+   *     if (codeManager.writeCausedByAppCheckedInFileTreeFileSystemWatcher) {
-        return
+   *       codeManager.writeCausedByAppCheckedInFileTreeFileSystemWatcher = false
-      }
+   *       return
+   *     }
 
-      if (isCurrentFile && eventType === 'change') {
+   *     if (isCurrentFile && eventType === 'change') {
-        let code = await window.electron.readFile(path, { encoding: 'utf-8' })
+   *       let code = await window.electron.readFile(path, { encoding: 'utf-8' })
-        code = normalizeLineEndings(code)
+   *       code = normalizeLineEndings(code)
-        codeManager.updateCodeStateEditor(code)
+   *       codeManager.updateCodeStateEditor(code)
-      }
+   *     }
-      fileSend({ type: 'Refresh' })
+   *     fileSend({ type: 'Refresh' })
-    },
+   *   },
-    [fileOrDir.path]
+   *   [fileOrDir.path]
-  )
+   * ) */
 
   const showNewTreeEntry =
     newTreeEntry !== undefined &&
@@ -261,7 +261,7 @@ const FileTreeItem = ({
       await codeManager.writeToFile()
 
       // Prevent seeing the model built one piece at a time when changing files
-      await kclManager.executeCode(true)
+      await kclManager.executeCode({ zoomToFit: true })
     } else {
       // Let the lsp servers know we closed a file.
       onFileClose(currentFile?.path || null, project?.path || null)

src/components/ModelingMachineProvider.tsx

@@ -24,7 +24,7 @@ import { useSetupEngineManager } from 'hooks/useSetupEngineManager'
 import { useSettingsAuthContext } from 'hooks/useSettingsAuthContext'
 import {
   isCursorInSketchCommandRange,
-  updatePathToNodeFromMap,
+  updateSketchDetailsNodePaths,
 } from 'lang/util'
 import {
   kclManager,
@@ -64,20 +64,30 @@ import {
   replaceValueAtNodePath,
   sketchOnExtrudedFace,
   sketchOnOffsetPlane,
+  splitPipedProfile,
   startSketchOnDefault,
 } from 'lang/modifyAst'
-import { PathToNode, Program, parse, recast, resultIsOk } from 'lang/wasm'
+import {
+  PathToNode,
+  Program,
+  VariableDeclaration,
+  parse,
+  recast,
+  resultIsOk,
+} from 'lang/wasm'
 import {
   artifactIsPlaneWithPaths,
-  getNodePathFromSourceRange,
+  doesSketchPipeNeedSplitting,
-  isSingleCursorInPipe,
+  getNodeFromPath,
+  isCursorInFunctionDefinition,
+  traverse,
 } from 'lang/queryAst'
 import { exportFromEngine } from 'lib/exportFromEngine'
 import { Models } from '@kittycad/lib/dist/types/src'
 import toast from 'react-hot-toast'
 import { useLoaderData, useNavigate, useSearchParams } from 'react-router-dom'
 import { letEngineAnimateAndSyncCamAfter } from 'clientSideScene/CameraControls'
-import { err, reportRejection, trap } from 'lib/trap'
+import { err, reportRejection, trap, reject } from 'lib/trap'
 import { useCommandsContext } from 'hooks/useCommandsContext'
 import {
   ExportIntent,
@@ -89,6 +99,10 @@ import { useFileContext } from 'hooks/useFileContext'
 import { uuidv4 } from 'lib/utils'
 import { IndexLoaderData } from 'lib/types'
 import { Node } from 'wasm-lib/kcl/bindings/Node'
+import {
+  getPathsFromArtifact,
+  getPlaneFromArtifact,
+} from 'lang/std/artifactGraph'
 import { promptToEditFlow } from 'lib/promptToEdit'
 import { kclEditorActor } from 'machines/kclEditorMachine'
 
@@ -181,7 +195,7 @@ export const ModelingMachineProvider = ({
           store.videoElement?.pause()
 
           return kclManager
-            .executeCode()
+            .executeCode({ isPartialExecution: true })
             .then(() => {
               if (engineCommandManager.engineConnection?.idleMode) return
 
@@ -281,7 +295,7 @@ export const ModelingMachineProvider = ({
           return {
             sketchDetails: {
               ...sketchDetails,
-              sketchPathToNode: event.data,
+              sketchEntryNodePath: event.data,
             },
           }
         }),
@@ -396,9 +410,17 @@ export const ModelingMachineProvider = ({
                 selectionRanges: setSelections.selection,
                 sketchDetails: {
                   ...sketchDetails,
-                  sketchPathToNode:
+                  sketchEntryNodePath:
-                    setSelections.updatedPathToNode ||
+                    setSelections.updatedSketchEntryNodePath ||
-                    sketchDetails?.sketchPathToNode ||
+                    sketchDetails?.sketchEntryNodePath ||
+                    [],
+                  sketchNodePaths:
+                    setSelections.updatedSketchNodePaths ||
+                    sketchDetails?.sketchNodePaths ||
+                    [],
+                  planeNodePath:
+                    setSelections.updatedPlaneNodePath ||
+                    sketchDetails?.planeNodePath ||
                     [],
                 },
               }
@@ -552,7 +574,12 @@ export const ModelingMachineProvider = ({
           if (artifactIsPlaneWithPaths(selectionRanges)) {
             return true
           }
-          if (!isSingleCursorInPipe(selectionRanges, kclManager.ast))
+          if (
+            isCursorInFunctionDefinition(
+              kclManager.ast,
+              selectionRanges.graphSelections[0]
+            )
+          )
             return false
           return !!isCursorInSketchCommandRange(
             engineCommandManager.artifactGraph,
@@ -583,10 +610,32 @@ export const ModelingMachineProvider = ({
               // this assumes no changes have been made to the sketch besides what we did when entering the sketch
               // i.e. doesn't account for user's adding code themselves, maybe we need store a flag userEditedSinceSketchMode?
               const newAst = structuredClone(kclManager.ast)
-              const varDecIndex = sketchDetails.sketchPathToNode[1][0]
+              const varDecIndex = sketchDetails.planeNodePath[1][0]
+
+              const varDec = getNodeFromPath<VariableDeclaration>(
+                newAst,
+                sketchDetails.planeNodePath,
+                'VariableDeclaration'
+              )
+              if (err(varDec)) return reject(new Error('No varDec'))
+              const variableName = varDec.node.declaration.id.name
+              let isIdentifierUsed = false
+              traverse(newAst, {
+                enter: (node) => {
+                  if (
+                    node.type === 'Identifier' &&
+                    node.name === variableName
+                  ) {
+                    isIdentifierUsed = true
+                  }
+                },
+              })
+              if (isIdentifierUsed) return
+
               // remove body item at varDecIndex
               newAst.body = newAst.body.filter((_, i) => i !== varDecIndex)
               await kclManager.executeAstMock(newAst)
+              await codeManager.updateEditorWithAstAndWriteToFile(newAst)
             }
             sceneInfra.setCallbacks({
               onClick: () => {},
@@ -596,7 +645,7 @@ export const ModelingMachineProvider = ({
           }
         ),
         'animate-to-face': fromPromise(async ({ input }) => {
-          if (!input) return undefined
+          if (!input) return null
           if (input.type === 'extrudeFace' || input.type === 'offsetPlane') {
             const sketched =
               input.type === 'extrudeFace'
@@ -623,7 +672,9 @@ export const ModelingMachineProvider = ({
             await letEngineAnimateAndSyncCamAfter(engineCommandManager, id)
             sceneInfra.camControls.syncDirection = 'clientToEngine'
             return {
-              sketchPathToNode: pathToNewSketchNode,
+              sketchEntryNodePath: [],
+              planeNodePath: pathToNewSketchNode,
+              sketchNodePaths: [],
               zAxis: input.zAxis,
               yAxis: input.yAxis,
               origin: input.position,
@@ -643,7 +694,9 @@ export const ModelingMachineProvider = ({
           )
 
           return {
-            sketchPathToNode: pathToNode,
+            sketchEntryNodePath: [],
+            planeNodePath: pathToNode,
+            sketchNodePaths: [],
             zAxis: input.zAxis,
             yAxis: input.yAxis,
             origin: [0, 0, 0],
@@ -651,12 +704,14 @@ export const ModelingMachineProvider = ({
         }),
         'animate-to-sketch': fromPromise(
           async ({ input: { selectionRanges } }) => {
-            const sourceRange =
+            const sketchPathToNode =
-              selectionRanges.graphSelections[0]?.codeRef?.range
+              selectionRanges.graphSelections[0]?.codeRef?.pathToNode
-            const sketchPathToNode = getNodePathFromSourceRange(
+            const plane = getPlaneFromArtifact(
-              kclManager.ast,
+              selectionRanges.graphSelections[0].artifact,
-              sourceRange
+              engineCommandManager.artifactGraph
             )
+            if (err(plane)) return Promise.reject(plane)
+
             const info = await getSketchOrientationDetails(
               sketchPathToNode || []
             )
@@ -664,8 +719,17 @@ export const ModelingMachineProvider = ({
               engineCommandManager,
               info?.sketchDetails?.faceId || ''
             )
-            return {
+            const sketchPaths = getPathsFromArtifact({
+              artifact: selectionRanges.graphSelections[0].artifact,
               sketchPathToNode: sketchPathToNode || [],
+            })
+            if (err(sketchPaths)) return Promise.reject(sketchPaths)
+            if (!plane.codeRef)
+              return Promise.reject(new Error('No plane codeRef'))
+            return {
+              sketchEntryNodePath: sketchPathToNode || [],
+              sketchNodePaths: sketchPaths,
+              planeNodePath: plane.codeRef.pathToNode,
               zAxis: info.sketchDetails.zAxis || null,
               yAxis: info.sketchDetails.yAxis || null,
               origin: info.sketchDetails.origin.map(
@@ -677,7 +741,7 @@ export const ModelingMachineProvider = ({
 
         'Get horizontal info': fromPromise(
           async ({ input: { selectionRanges, sketchDetails } }) => {
-            const { modifiedAst, pathToNodeMap } =
+            const { modifiedAst, pathToNodeMap, exprInsertIndex } =
               await applyConstraintHorzVertDistance({
                 constraint: 'setHorzDistance',
                 selectionRanges,
@@ -689,13 +753,23 @@ export const ModelingMachineProvider = ({
 
             if (!sketchDetails)
               return Promise.reject(new Error('No sketch details'))
-            const updatedPathToNode = updatePathToNodeFromMap(
+
-              sketchDetails.sketchPathToNode,
+            const {
-              pathToNodeMap
+              updatedSketchEntryNodePath,
-            )
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
+            } = updateSketchDetailsNodePaths({
+              sketchEntryNodePath: sketchDetails.sketchEntryNodePath,
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              planeNodePath: sketchDetails.planeNodePath,
+              exprInsertIndex,
+            })
+
             const updatedAst =
               await sceneEntitiesManager.updateAstAndRejigSketch(
-                updatedPathToNode,
+                updatedSketchEntryNodePath,
+                updatedSketchNodePaths,
+                updatedPlaneNodePath,
                 _modifiedAst,
                 sketchDetails.zAxis,
                 sketchDetails.yAxis,
@@ -716,13 +790,15 @@ export const ModelingMachineProvider = ({
             return {
               selectionType: 'completeSelection',
               selection,
-              updatedPathToNode,
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
             }
           }
         ),
         'Get vertical info': fromPromise(
           async ({ input: { selectionRanges, sketchDetails } }) => {
-            const { modifiedAst, pathToNodeMap } =
+            const { modifiedAst, pathToNodeMap, exprInsertIndex } =
               await applyConstraintHorzVertDistance({
                 constraint: 'setVertDistance',
                 selectionRanges,
@@ -733,13 +809,23 @@ export const ModelingMachineProvider = ({
             const _modifiedAst = pResult.program
             if (!sketchDetails)
               return Promise.reject(new Error('No sketch details'))
-            const updatedPathToNode = updatePathToNodeFromMap(
+
-              sketchDetails.sketchPathToNode,
+            const {
-              pathToNodeMap
+              updatedSketchEntryNodePath,
-            )
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
+            } = updateSketchDetailsNodePaths({
+              sketchEntryNodePath: sketchDetails.sketchEntryNodePath,
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              planeNodePath: sketchDetails.planeNodePath,
+              exprInsertIndex,
+            })
+
             const updatedAst =
               await sceneEntitiesManager.updateAstAndRejigSketch(
-                updatedPathToNode,
+                updatedSketchEntryNodePath,
+                updatedSketchNodePaths,
+                updatedPlaneNodePath,
                 _modifiedAst,
                 sketchDetails.zAxis,
                 sketchDetails.yAxis,
@@ -760,7 +846,9 @@ export const ModelingMachineProvider = ({
             return {
               selectionType: 'completeSelection',
               selection,
-              updatedPathToNode,
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
             }
           }
         ),
@@ -770,14 +858,15 @@ export const ModelingMachineProvider = ({
               selectionRanges,
             })
             if (err(info)) return Promise.reject(info)
-            const { modifiedAst, pathToNodeMap } = await (info.enabled
+            const { modifiedAst, pathToNodeMap, exprInsertIndex } =
-              ? applyConstraintAngleBetween({
+              await (info.enabled
-                  selectionRanges,
+                ? applyConstraintAngleBetween({
-                })
+                    selectionRanges,
-              : applyConstraintAngleLength({
+                  })
-                  selectionRanges,
+                : applyConstraintAngleLength({
-                  angleOrLength: 'setAngle',
+                    selectionRanges,
-                }))
+                    angleOrLength: 'setAngle',
+                  }))
             const pResult = parse(recast(modifiedAst))
             if (trap(pResult) || !resultIsOk(pResult))
               return Promise.reject(new Error('Unexpected compilation error'))
@@ -786,13 +875,23 @@ export const ModelingMachineProvider = ({
 
             if (!sketchDetails)
               return Promise.reject(new Error('No sketch details'))
-            const updatedPathToNode = updatePathToNodeFromMap(
+
-              sketchDetails.sketchPathToNode,
+            const {
-              pathToNodeMap
+              updatedSketchEntryNodePath,
-            )
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
+            } = updateSketchDetailsNodePaths({
+              sketchEntryNodePath: sketchDetails.sketchEntryNodePath,
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              planeNodePath: sketchDetails.planeNodePath,
+              exprInsertIndex,
+            })
+
             const updatedAst =
               await sceneEntitiesManager.updateAstAndRejigSketch(
-                updatedPathToNode,
+                updatedSketchEntryNodePath,
+                updatedSketchNodePaths,
+                updatedPlaneNodePath,
                 _modifiedAst,
                 sketchDetails.zAxis,
                 sketchDetails.yAxis,
@@ -813,7 +912,9 @@ export const ModelingMachineProvider = ({
             return {
               selectionType: 'completeSelection',
               selection,
-              updatedPathToNode,
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
             }
           }
         ),
@@ -828,20 +929,30 @@ export const ModelingMachineProvider = ({
               length: lengthValue,
             })
             if (err(constraintResult)) return Promise.reject(constraintResult)
-            const { modifiedAst, pathToNodeMap } = constraintResult
+            const { modifiedAst, pathToNodeMap, exprInsertIndex } =
+              constraintResult
             const pResult = parse(recast(modifiedAst))
             if (trap(pResult) || !resultIsOk(pResult))
               return Promise.reject(new Error('Unexpected compilation error'))
             const _modifiedAst = pResult.program
             if (!sketchDetails)
               return Promise.reject(new Error('No sketch details'))
-            const updatedPathToNode = updatePathToNodeFromMap(
+
-              sketchDetails.sketchPathToNode,
+            const {
-              pathToNodeMap
+              updatedSketchEntryNodePath,
-            )
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
+            } = updateSketchDetailsNodePaths({
+              sketchEntryNodePath: sketchDetails.sketchEntryNodePath,
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              planeNodePath: sketchDetails.planeNodePath,
+              exprInsertIndex,
+            })
             const updatedAst =
               await sceneEntitiesManager.updateAstAndRejigSketch(
-                updatedPathToNode,
+                updatedSketchEntryNodePath,
+                updatedSketchNodePaths,
+                updatedPlaneNodePath,
                 _modifiedAst,
                 sketchDetails.zAxis,
                 sketchDetails.yAxis,
@@ -862,13 +973,15 @@ export const ModelingMachineProvider = ({
             return {
               selectionType: 'completeSelection',
               selection,
-              updatedPathToNode,
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
             }
           }
         ),
         'Get perpendicular distance info': fromPromise(
           async ({ input: { selectionRanges, sketchDetails } }) => {
-            const { modifiedAst, pathToNodeMap } =
+            const { modifiedAst, pathToNodeMap, exprInsertIndex } =
               await applyConstraintIntersect({
                 selectionRanges,
               })
@@ -878,13 +991,22 @@ export const ModelingMachineProvider = ({
             const _modifiedAst = pResult.program
             if (!sketchDetails)
               return Promise.reject(new Error('No sketch details'))
-            const updatedPathToNode = updatePathToNodeFromMap(
+
-              sketchDetails.sketchPathToNode,
+            const {
-              pathToNodeMap
+              updatedSketchEntryNodePath,
-            )
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
+            } = updateSketchDetailsNodePaths({
+              sketchEntryNodePath: sketchDetails.sketchEntryNodePath,
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              planeNodePath: sketchDetails.planeNodePath,
+              exprInsertIndex,
+            })
             const updatedAst =
               await sceneEntitiesManager.updateAstAndRejigSketch(
-                updatedPathToNode,
+                updatedSketchEntryNodePath,
+                updatedSketchNodePaths,
+                updatedPlaneNodePath,
                 _modifiedAst,
                 sketchDetails.zAxis,
                 sketchDetails.yAxis,
@@ -905,13 +1027,15 @@ export const ModelingMachineProvider = ({
             return {
               selectionType: 'completeSelection',
               selection,
-              updatedPathToNode,
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
             }
           }
         ),
         'Get ABS X info': fromPromise(
           async ({ input: { selectionRanges, sketchDetails } }) => {
-            const { modifiedAst, pathToNodeMap } =
+            const { modifiedAst, pathToNodeMap, exprInsertIndex } =
               await applyConstraintAbsDistance({
                 constraint: 'xAbs',
                 selectionRanges,
@@ -922,13 +1046,22 @@ export const ModelingMachineProvider = ({
             const _modifiedAst = pResult.program
             if (!sketchDetails)
               return Promise.reject(new Error('No sketch details'))
-            const updatedPathToNode = updatePathToNodeFromMap(
+
-              sketchDetails.sketchPathToNode,
+            const {
-              pathToNodeMap
+              updatedSketchEntryNodePath,
-            )
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
+            } = updateSketchDetailsNodePaths({
+              sketchEntryNodePath: sketchDetails.sketchEntryNodePath,
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              planeNodePath: sketchDetails.planeNodePath,
+              exprInsertIndex,
+            })
             const updatedAst =
               await sceneEntitiesManager.updateAstAndRejigSketch(
-                updatedPathToNode,
+                updatedSketchEntryNodePath,
+                updatedSketchNodePaths,
+                updatedPlaneNodePath,
                 _modifiedAst,
                 sketchDetails.zAxis,
                 sketchDetails.yAxis,
@@ -949,13 +1082,15 @@ export const ModelingMachineProvider = ({
             return {
               selectionType: 'completeSelection',
               selection,
-              updatedPathToNode,
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
             }
           }
         ),
         'Get ABS Y info': fromPromise(
           async ({ input: { selectionRanges, sketchDetails } }) => {
-            const { modifiedAst, pathToNodeMap } =
+            const { modifiedAst, pathToNodeMap, exprInsertIndex } =
               await applyConstraintAbsDistance({
                 constraint: 'yAbs',
                 selectionRanges,
@@ -966,13 +1101,22 @@ export const ModelingMachineProvider = ({
             const _modifiedAst = pResult.program
             if (!sketchDetails)
               return Promise.reject(new Error('No sketch details'))
-            const updatedPathToNode = updatePathToNodeFromMap(
+
-              sketchDetails.sketchPathToNode,
+            const {
-              pathToNodeMap
+              updatedSketchEntryNodePath,
-            )
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
+            } = updateSketchDetailsNodePaths({
+              sketchEntryNodePath: sketchDetails.sketchEntryNodePath,
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              planeNodePath: sketchDetails.planeNodePath,
+              exprInsertIndex,
+            })
             const updatedAst =
               await sceneEntitiesManager.updateAstAndRejigSketch(
-                updatedPathToNode,
+                updatedSketchEntryNodePath,
+                updatedSketchNodePaths,
+                updatedPlaneNodePath,
                 _modifiedAst,
                 sketchDetails.zAxis,
                 sketchDetails.yAxis,
@@ -993,7 +1137,9 @@ export const ModelingMachineProvider = ({
             return {
               selectionType: 'completeSelection',
               selection,
-              updatedPathToNode,
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
             }
           }
         ),
@@ -1013,9 +1159,11 @@ export const ModelingMachineProvider = ({
             let result: {
               modifiedAst: Node<Program>
               pathToReplaced: PathToNode | null
+              exprInsertIndex: number
             } = {
               modifiedAst: parsed,
               pathToReplaced: null,
+              exprInsertIndex: -1,
             }
             // If the user provided a constant name,
             // we need to insert the named constant
@@ -1045,6 +1193,7 @@ export const ModelingMachineProvider = ({
               result = {
                 modifiedAst: parseResultAfterInsertion.program,
                 pathToReplaced: astAfterReplacement.pathToReplaced,
+                exprInsertIndex: astAfterReplacement.exprInsertIndex,
               }
             } else if ('valueText' in data.namedValue) {
               // If they didn't provide a constant name,
@@ -1075,10 +1224,22 @@ export const ModelingMachineProvider = ({
             parsed = parsed as Node<Program>
             if (!result.pathToReplaced)
               return Promise.reject(new Error('No path to replaced node'))
+            const {
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
+            } = updateSketchDetailsNodePaths({
+              sketchEntryNodePath: sketchDetails.sketchEntryNodePath,
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              planeNodePath: sketchDetails.planeNodePath,
+              exprInsertIndex: result.exprInsertIndex,
+            })
 
             const updatedAst =
               await sceneEntitiesManager.updateAstAndRejigSketch(
-                result.pathToReplaced || [],
+                updatedSketchEntryNodePath,
+                updatedSketchNodePaths,
+                updatedPlaneNodePath,
                 parsed,
                 sketchDetails.zAxis,
                 sketchDetails.yAxis,
@@ -1099,7 +1260,140 @@ export const ModelingMachineProvider = ({
             return {
               selectionType: 'completeSelection',
               selection,
-              updatedPathToNode: result.pathToReplaced,
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
+            }
+          }
+        ),
+        'set-up-draft-circle': fromPromise(
+          async ({ input: { sketchDetails, data } }) => {
+            if (!sketchDetails || !data)
+              return reject('No sketch details or data')
+            await sceneEntitiesManager.tearDownSketch({ removeAxis: false })
+
+            const result = await sceneEntitiesManager.setupDraftCircle(
+              sketchDetails.sketchEntryNodePath,
+              sketchDetails.sketchNodePaths,
+              sketchDetails.planeNodePath,
+              sketchDetails.zAxis,
+              sketchDetails.yAxis,
+              sketchDetails.origin,
+              data
+            )
+            if (err(result)) return reject(result)
+            await codeManager.updateEditorWithAstAndWriteToFile(kclManager.ast)
+
+            return result
+          }
+        ),
+        'set-up-draft-rectangle': fromPromise(
+          async ({ input: { sketchDetails, data } }) => {
+            if (!sketchDetails || !data)
+              return reject('No sketch details or data')
+            await sceneEntitiesManager.tearDownSketch({ removeAxis: false })
+
+            const result = await sceneEntitiesManager.setupDraftRectangle(
+              sketchDetails.sketchEntryNodePath,
+              sketchDetails.sketchNodePaths,
+              sketchDetails.planeNodePath,
+              sketchDetails.zAxis,
+              sketchDetails.yAxis,
+              sketchDetails.origin,
+              data
+            )
+            if (err(result)) return reject(result)
+            await codeManager.updateEditorWithAstAndWriteToFile(kclManager.ast)
+
+            return result
+          }
+        ),
+        'set-up-draft-center-rectangle': fromPromise(
+          async ({ input: { sketchDetails, data } }) => {
+            if (!sketchDetails || !data)
+              return reject('No sketch details or data')
+            await sceneEntitiesManager.tearDownSketch({ removeAxis: false })
+            const result = await sceneEntitiesManager.setupDraftCenterRectangle(
+              sketchDetails.sketchEntryNodePath,
+              sketchDetails.sketchNodePaths,
+              sketchDetails.planeNodePath,
+              sketchDetails.zAxis,
+              sketchDetails.yAxis,
+              sketchDetails.origin,
+              data
+            )
+            if (err(result)) return reject(result)
+            await codeManager.updateEditorWithAstAndWriteToFile(kclManager.ast)
+
+            return result
+          }
+        ),
+        'setup-client-side-sketch-segments': fromPromise(
+          async ({ input: { sketchDetails, selectionRanges } }) => {
+            if (!sketchDetails) return
+            if (!sketchDetails.sketchEntryNodePath.length) return
+            if (Object.keys(sceneEntitiesManager.activeSegments).length > 0) {
+              sceneEntitiesManager.tearDownSketch({ removeAxis: false })
+            }
+            sceneInfra.resetMouseListeners()
+            await sceneEntitiesManager.setupSketch({
+              sketchEntryNodePath: sketchDetails?.sketchEntryNodePath || [],
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              forward: sketchDetails.zAxis,
+              up: sketchDetails.yAxis,
+              position: sketchDetails.origin,
+              maybeModdedAst: kclManager.ast,
+              selectionRanges,
+            })
+            sceneInfra.resetMouseListeners()
+
+            sceneEntitiesManager.setupSketchIdleCallbacks({
+              sketchEntryNodePath: sketchDetails?.sketchEntryNodePath || [],
+              forward: sketchDetails.zAxis,
+              up: sketchDetails.yAxis,
+              position: sketchDetails.origin,
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              planeNodePath: sketchDetails.planeNodePath,
+            })
+            return undefined
+          }
+        ),
+        'split-sketch-pipe-if-needed': fromPromise(
+          async ({ input: { sketchDetails } }) => {
+            if (!sketchDetails) return reject('No sketch details')
+            const existingSketchInfoNoOp = {
+              updatedEntryNodePath: sketchDetails.sketchEntryNodePath,
+              updatedSketchNodePaths: sketchDetails.sketchNodePaths,
+              updatedPlaneNodePath: sketchDetails.planeNodePath,
+            } as const
+            if (
+              !sketchDetails.sketchNodePaths.length &&
+              sketchDetails.planeNodePath.length
+            ) {
+              // new sketch, no profiles yet
+              return existingSketchInfoNoOp
+            }
+            const doesNeedSplitting = doesSketchPipeNeedSplitting(
+              kclManager.ast,
+              sketchDetails.sketchEntryNodePath
+            )
+            if (err(doesNeedSplitting)) return reject(doesNeedSplitting)
+            if (!doesNeedSplitting) return existingSketchInfoNoOp
+
+            const splitResult = splitPipedProfile(
+              kclManager.ast,
+              sketchDetails.sketchEntryNodePath
+            )
+            if (err(splitResult)) return reject(splitResult)
+
+            await kclManager.executeAstMock(splitResult.modifiedAst)
+            await codeManager.updateEditorWithAstAndWriteToFile(
+              splitResult.modifiedAst
+            )
+            return {
+              updatedEntryNodePath: splitResult.pathToProfile,
+              updatedSketchNodePaths: [splitResult.pathToProfile],
+              updatedPlaneNodePath: sketchDetails.planeNodePath,
             }
           }
         ),

src/components/SettingsAuthProvider.tsx

@@ -188,7 +188,7 @@ export const SettingsAuthProviderBase = ({
             ) {
               // Unit changes requires a re-exec of code
               // eslint-disable-next-line @typescript-eslint/no-floating-promises
-              kclManager.executeCode(true)
+              kclManager.executeCode({ zoomToFit: true })
             } else {
               // For any future logging we'd like to do
               // console.log(

src/components/Spinner.tsx

@@ -2,7 +2,12 @@ import { SVGProps } from 'react'
 
 export const Spinner = (props: SVGProps<SVGSVGElement>) => {
   return (
-    <svg viewBox="0 0 10 10" className={'w-8 h-8'} {...props}>
+    <svg
+      data-testid="spinner"
+      viewBox="0 0 10 10"
+      className={'w-8 h-8'}
+      {...props}
+    >
       <circle
         cx="5"
         cy="5"

src/components/Stream.tsx

@@ -59,7 +59,7 @@ export const Stream = () => {
    */
   function executeCodeAndPlayStream() {
     // eslint-disable-next-line @typescript-eslint/no-floating-promises
-    kclManager.executeCode(true).then(async () => {
+    kclManager.executeCode({ zoomToFit: true }).then(async () => {
       await videoRef.current?.play().catch((e) => {
         console.warn('Video playing was prevented', e, videoRef.current)
       })

src/components/Toolbar/Intersect.tsx

@@ -136,6 +136,7 @@ export async function applyConstraintIntersect({
 }): Promise<{
   modifiedAst: Node<Program>
   pathToNodeMap: PathToNodeMap
+  exprInsertIndex: number
 }> {
   const info = intersectInfo({
     selectionRanges,
@@ -174,6 +175,7 @@ export async function applyConstraintIntersect({
     return {
       modifiedAst,
       pathToNodeMap,
+      exprInsertIndex: -1,
     }
   }
   // transform again but forcing certain values
@@ -192,6 +194,7 @@ export async function applyConstraintIntersect({
   const { modifiedAst: _modifiedAst, pathToNodeMap: _pathToNodeMap } =
     transform2
 
+  let exprInsertIndex = -1
   if (variableName) {
     const newBody = [..._modifiedAst.body]
     newBody.splice(
@@ -204,9 +207,11 @@ export async function applyConstraintIntersect({
       const index = pathToNode.findIndex((a) => a[0] === 'body') + 1
       pathToNode[index][0] = Number(pathToNode[index][0]) + 1
     })
+    exprInsertIndex = newVariableInsertIndex
   }
   return {
     modifiedAst: _modifiedAst,
     pathToNodeMap: _pathToNodeMap,
+    exprInsertIndex,
   }
 }

src/components/Toolbar/RemoveConstrainingValues.tsx

@@ -28,7 +28,7 @@ export function removeConstrainingValuesInfo({
   | Error {
   const _nodes = selectionRanges.graphSelections.map(({ codeRef }) => {
     const tmp = getNodeFromPath<Expr>(kclManager.ast, codeRef.pathToNode)
-    if (err(tmp)) return tmp
+    if (tmp instanceof Error) return tmp
     return tmp.node
   })
   const _err1 = _nodes.find(err)

src/components/Toolbar/SetAbsDistance.tsx

@@ -93,6 +93,7 @@ export async function applyConstraintAbsDistance({
 }): Promise<{
   modifiedAst: Program
   pathToNodeMap: PathToNodeMap
+  exprInsertIndex: number
 }> {
   const info = absDistanceInfo({
     selectionRanges,
@@ -132,6 +133,7 @@ export async function applyConstraintAbsDistance({
   if (err(transform2)) return Promise.reject(transform2)
   const { modifiedAst: _modifiedAst, pathToNodeMap } = transform2
 
+  let exprInsertIndex = -1
   if (variableName) {
     const newBody = [..._modifiedAst.body]
     newBody.splice(
@@ -144,8 +146,9 @@ export async function applyConstraintAbsDistance({
       const index = pathToNode.findIndex((a) => a[0] === 'body') + 1
       pathToNode[index][0] = Number(pathToNode[index][0]) + 1
     })
+    exprInsertIndex = newVariableInsertIndex
   }
-  return { modifiedAst: _modifiedAst, pathToNodeMap }
+  return { modifiedAst: _modifiedAst, pathToNodeMap, exprInsertIndex }
 }
 
 export function applyConstraintAxisAlign({

src/components/Toolbar/SetAngleBetween.tsx

@@ -86,6 +86,7 @@ export async function applyConstraintAngleBetween({
 }): Promise<{
   modifiedAst: Program
   pathToNodeMap: PathToNodeMap
+  exprInsertIndex: number
 }> {
   const info = angleBetweenInfo({ selectionRanges })
   if (err(info)) return Promise.reject(info)
@@ -122,6 +123,7 @@ export async function applyConstraintAngleBetween({
     return {
       modifiedAst,
       pathToNodeMap,
+      exprInsertIndex: -1,
     }
   }
 
@@ -141,6 +143,7 @@ export async function applyConstraintAngleBetween({
   const { modifiedAst: _modifiedAst, pathToNodeMap: _pathToNodeMap } =
     transformed2
 
+  let exprInsertIndex = -1
   if (variableName) {
     const newBody = [..._modifiedAst.body]
     newBody.splice(
@@ -153,9 +156,11 @@ export async function applyConstraintAngleBetween({
       const index = pathToNode.findIndex((a) => a[0] === 'body') + 1
       pathToNode[index][0] = Number(pathToNode[index][0]) + 1
     })
+    exprInsertIndex = newVariableInsertIndex
   }
   return {
     modifiedAst: _modifiedAst,
     pathToNodeMap: _pathToNodeMap,
+    exprInsertIndex,
   }
 }

src/components/Toolbar/SetHorzVertDistance.tsx

@@ -87,15 +87,13 @@ export function horzVertDistanceInfo({
 export async function applyConstraintHorzVertDistance({
   selectionRanges,
   constraint,
-  // TODO align will always be false (covered by synconous applyConstraintHorzVertAlign), remove it
-  isAlign = false,
 }: {
   selectionRanges: Selections
   constraint: 'setHorzDistance' | 'setVertDistance'
-  isAlign?: false
 }): Promise<{
   modifiedAst: Program
   pathToNodeMap: PathToNodeMap
+  exprInsertIndex: number
 }> {
   const info = horzVertDistanceInfo({
     selectionRanges: selectionRanges,
@@ -133,13 +131,12 @@ export async function applyConstraintHorzVertDistance({
     return {
       modifiedAst,
       pathToNodeMap,
+      exprInsertIndex: -1,
     }
   } else {
     if (!isExprBinaryPart(valueNode))
       return Promise.reject('Invalid valueNode, is not a BinaryPart')
-    let finalValue = isAlign
+    let finalValue = removeDoubleNegatives(valueNode, sign, variableName)
-      ? createLiteral(0)
-      : removeDoubleNegatives(valueNode, sign, variableName)
     // transform again but forcing certain values
     const transformed = transformSecondarySketchLinesTagFirst({
       ast: kclManager.ast,
@@ -152,6 +149,7 @@ export async function applyConstraintHorzVertDistance({
 
     if (err(transformed)) return Promise.reject(transformed)
     const { modifiedAst: _modifiedAst, pathToNodeMap } = transformed
+    let exprInsertIndex = -1
     if (variableName) {
       const newBody = [..._modifiedAst.body]
       newBody.splice(
@@ -164,10 +162,12 @@ export async function applyConstraintHorzVertDistance({
         const index = pathToNode.findIndex((a) => a[0] === 'body') + 1
         pathToNode[index][0] = Number(pathToNode[index][0]) + 1
       })
+      exprInsertIndex = newVariableInsertIndex
     }
     return {
       modifiedAst: _modifiedAst,
       pathToNodeMap,
+      exprInsertIndex,
     }
   }
 }

src/components/Toolbar/setAngleLength.tsx

@@ -70,10 +70,14 @@ export async function applyConstraintLength({
 }: {
   length: KclCommandValue
   selectionRanges: Selections
-}) {
+}): Promise<{
+  modifiedAst: Program
+  pathToNodeMap: PathToNodeMap
+  exprInsertIndex: number
+}> {
   const ast = kclManager.ast
   const angleLength = angleLengthInfo({ selectionRanges })
-  if (err(angleLength)) return angleLength
+  if (err(angleLength)) return Promise.reject(angleLength)
   const { transforms } = angleLength
 
   let distanceExpression: Expr = length.valueAst
@@ -94,7 +98,7 @@ export async function applyConstraintLength({
   }
 
   if (!isExprBinaryPart(distanceExpression)) {
-    return new Error('Invalid valueNode, is not a BinaryPart')
+    return Promise.reject('Invalid valueNode, is not a BinaryPart')
   }
 
   const retval = transformAstSketchLines({
@@ -112,6 +116,12 @@ export async function applyConstraintLength({
   return {
     modifiedAst: _modifiedAst,
     pathToNodeMap,
+    exprInsertIndex:
+      'variableName' in length &&
+      length.variableName &&
+      length.insertIndex !== undefined
+        ? length.insertIndex
+        : -1,
   }
 }
 
@@ -124,6 +134,7 @@ export async function applyConstraintAngleLength({
 }): Promise<{
   modifiedAst: Program
   pathToNodeMap: PathToNodeMap
+  exprInsertIndex: number
 }> {
   const angleLength = angleLengthInfo({ selectionRanges, angleOrLength })
   if (err(angleLength)) return Promise.reject(angleLength)
@@ -208,5 +219,6 @@ export async function applyConstraintAngleLength({
   return {
     modifiedAst: _modifiedAst,
     pathToNodeMap,
+    exprInsertIndex: variableName ? newVariableInsertIndex : -1,
   }
 }

src/lang/KclSingleton.ts

@@ -37,6 +37,7 @@ import { Operation } from 'wasm-lib/kcl/bindings/Operation'
 interface ExecuteArgs {
   ast?: Node<Program>
   zoomToFit?: boolean
+  isPartialExecution?: boolean
   executionId?: number
   zoomOnRangeAndType?: {
     range: SourceRange
@@ -379,13 +380,12 @@ export class KclManager {
     await this.engineCommandManager.updateArtifactGraph(
       this.ast,
       execState.artifactCommands,
-      execState.artifacts
+      execState.artifacts,
+      args.isPartialExecution,
     )
     this._executeCallback()
-    if (!isInterrupted) {
+    if (!isInterrupted)
       sceneInfra.modelingSend({ type: 'code edit during sketch' })
-    }
-
     this.engineCommandManager.addCommandLog({
       type: 'execution-done',
       data: null,
@@ -445,6 +445,7 @@ export class KclManager {
 
     this._logs = logs
     this.addDiagnostics(kclErrorsToDiagnostics(errors))
+
     this._execState = execState
     this._programMemory = execState.memory
     if (!errors.length) {
@@ -457,7 +458,7 @@ export class KclManager {
     // problem this solves, but either way we should strive to remove it.
     Array.from(this.engineCommandManager.artifactGraph).forEach(
       ([commandId, artifact]) => {
-        if (!('codeRef' in artifact)) return
+        if (!('codeRef' in artifact && artifact.codeRef)) return
         const _node1 = getNodeFromPath<Node<CallExpression>>(
           this.ast,
           artifact.codeRef.pathToNode,
@@ -484,7 +485,7 @@ export class KclManager {
       this._cancelTokens.set(key, true)
     })
   }
-  async executeCode(zoomToFit?: boolean): Promise<void> {
+  async executeCode(opts?: { zoomToFit?: true, isPartialExecution?: true }): Promise<void> {
     const ast = await this.safeParse(codeManager.code)
 
     if (!ast) {
@@ -492,10 +493,10 @@ export class KclManager {
       return
     }
 
-    zoomToFit = this.tryToZoomToFitOnCodeUpdate(ast, zoomToFit)
+    zoomToFit = this.tryToZoomToFitOnCodeUpdate(ast, opts?.zoomToFit)
 
     this.ast = { ...ast }
-    return this.executeAst({ zoomToFit })
+    return this.executeAst(opts)
   }
   /**
    * This will override the zoom to fit to zoom into the model if the previous AST was empty.

src/lang/codeManager.ts

@@ -153,7 +153,7 @@ export default class CodeManager {
               toast.error('Error saving file, please check file permissions')
               reject(err)
             })
-        }, 1000)
+        }, 10)
       })
     } else {
       safeLSSetItem(PERSIST_CODE_KEY, this.code)

src/lang/langHelpers.ts

@@ -67,7 +67,6 @@ export async function executeAst({
       : executor(ast, engineCommandManager))
 
     await engineCommandManager.waitForAllCommands()
-
     return {
       logs: [],
       errors: [],

src/lang/modifyAst.test.ts

@@ -16,6 +16,7 @@ import {
   deleteSegmentFromPipeExpression,
   removeSingleConstraintInfo,
   deleteFromSelection,
+  splitPipedProfile,
 } from './modifyAst'
 import { enginelessExecutor } from '../lib/testHelpers'
 import { findUsesOfTagInPipe, getNodePathFromSourceRange } from './queryAst'
@@ -918,3 +919,63 @@ sketch002 = startSketchOn({
     }
   )
 })
+
+describe('Testing splitPipedProfile', () => {
+  it('should split the pipe expression correctly', () => {
+    const codeBefore = `part001 = startSketchOn('XZ')
+  |> startProfileAt([1, 2], %)
+  |> line([3, 4], %)
+  |> line([5, 6], %)
+  |> close(%)
+extrude001 = extrude(5, part001)
+    `
+
+    const expectedCodeAfter = `sketch001 = startSketchOn('XZ')
+part001 = startProfileAt([1, 2], sketch001)
+  |> line([3, 4], %)
+  |> line([5, 6], %)
+  |> close(%)
+extrude001 = extrude(5, part001)
+    `
+
+    const ast = assertParse(codeBefore)
+
+    const codeOfInterest = `startSketchOn('XZ')`
+    const range: [number, number, boolean] = [
+      codeBefore.indexOf(codeOfInterest),
+      codeBefore.indexOf(codeOfInterest) + codeOfInterest.length,
+      true,
+    ]
+    const pathToPipe = getNodePathFromSourceRange(ast, range)
+
+    const result = splitPipedProfile(ast, pathToPipe)
+
+    if (err(result)) throw result
+
+    const newCode = recast(result.modifiedAst)
+    if (err(newCode)) throw newCode
+    expect(newCode.trim()).toBe(expectedCodeAfter.trim())
+  })
+  it('should return error for already split pipe', () => {
+    const codeBefore = `sketch001 = startSketchOn('XZ')
+part001 = startProfileAt([1, 2], sketch001)
+  |> line([3, 4], %)
+  |> line([5, 6], %)
+  |> close(%)
+extrude001 = extrude(5, part001)
+    `
+
+    const ast = assertParse(codeBefore)
+
+    const codeOfInterest = `startProfileAt([1, 2], sketch001)`
+    const range: [number, number, boolean] = [
+      codeBefore.indexOf(codeOfInterest),
+      codeBefore.indexOf(codeOfInterest) + codeOfInterest.length,
+      true,
+    ]
+    const pathToPipe = getNodePathFromSourceRange(ast, range)
+
+    const result = splitPipedProfile(ast, pathToPipe)
+    expect(result instanceof Error).toBe(true)
+  })
+})

src/lang/modifyAst.ts

@@ -29,6 +29,8 @@ import {
   getNodePathFromSourceRange,
   isNodeSafeToReplace,
   traverse,
+  getBodyIndex,
+  isCallExprWithName,
 } from './queryAst'
 import { addTagForSketchOnFace, getConstraintInfo } from './std/sketch'
 import {
@@ -46,6 +48,7 @@ import { Models } from '@kittycad/lib'
 import { ExtrudeFacePlane } from 'machines/modelingMachine'
 import { Node } from 'wasm-lib/kcl/bindings/Node'
 import { KclExpressionWithVariable } from 'lib/commandTypes'
+import { Artifact, getPathsFromArtifact } from './std/artifactGraph'
 
 export function startSketchOnDefault(
   node: Node<Program>,
@@ -78,41 +81,54 @@ export function startSketchOnDefault(
   }
 }
 
-export function addStartProfileAt(
+export function insertNewStartProfileAt(
   node: Node<Program>,
-  pathToNode: PathToNode,
+  sketchEntryNodePath: PathToNode,
-  at: [number, number]
+  sketchNodePaths: PathToNode[],
-): { modifiedAst: Node<Program>; pathToNode: PathToNode } | Error {
+  planeNodePath: PathToNode,
-  const _node1 = getNodeFromPath<VariableDeclaration>(
+  at: [number, number],
+  insertType: 'start' | 'end' = 'end'
+):
+  | {
+      modifiedAst: Node<Program>
+      updatedSketchNodePaths: PathToNode[]
+      updatedEntryNodePath: PathToNode
+    }
+  | Error {
+  const varDec = getNodeFromPath<VariableDeclarator>(
     node,
-    pathToNode,
+    planeNodePath,
-    'VariableDeclaration'
+    'VariableDeclarator'
   )
-  if (err(_node1)) return _node1
+  if (err(varDec)) return varDec
-  const variableDeclaration = _node1.node
+  if (varDec.node.type !== 'VariableDeclarator') return new Error('not a var')
-  if (variableDeclaration.type !== 'VariableDeclaration') {
+
-    return new Error('variableDeclaration.init.type !== PipeExpression')
+  const newExpression = createVariableDeclaration(
-  }
+    findUniqueName(node, 'profile'),
-  const _node = { ...node }
+    createCallExpressionStdLib('startProfileAt', [
-  const init = variableDeclaration.declaration.init
+      createArrayExpression([
-  const startProfileAt = createCallExpressionStdLib('startProfileAt', [
+        createLiteral(roundOff(at[0])),
-    createArrayExpression([
+        createLiteral(roundOff(at[1])),
-      createLiteral(roundOff(at[0])),
+      ]),
-      createLiteral(roundOff(at[1])),
+      createIdentifier(varDec.node.id.name),
-    ]),
-    createPipeSubstitution(),
-  ])
-  if (init.type === 'PipeExpression') {
-    init.body.splice(1, 0, startProfileAt)
-  } else {
-    variableDeclaration.declaration.init = createPipeExpression([
-      init,
-      startProfileAt,
     ])
-  }
+  )
+  const insertIndex = getInsertIndex(sketchNodePaths, planeNodePath, insertType)
+
+  const _node = structuredClone(node)
+  // TODO the rest of this function will not be robust to work for sketches defined within a function declaration
+  _node.body.splice(insertIndex, 0, newExpression)
+
+  const { updatedEntryNodePath, updatedSketchNodePaths } =
+    updateSketchNodePathsWithInsertIndex({
+      insertIndex,
+      insertType,
+      sketchNodePaths,
+    })
   return {
     modifiedAst: _node,
-    pathToNode,
+    updatedSketchNodePaths,
+    updatedEntryNodePath,
   }
 }
 
@@ -253,7 +269,7 @@ export function mutateObjExpProp(
 export function extrudeSketch(
   node: Node<Program>,
   pathToNode: PathToNode,
-  shouldPipe = false,
+  artifact?: Artifact,
   distance: Expr = createLiteral(4)
 ):
   | {
@@ -262,10 +278,14 @@ export function extrudeSketch(
       pathToExtrudeArg: PathToNode
     }
   | Error {
+  const orderedSketchNodePaths = getPathsFromArtifact({
+    artifact: artifact,
+    sketchPathToNode: pathToNode,
+  })
+  if (err(orderedSketchNodePaths)) return orderedSketchNodePaths
   const _node = structuredClone(node)
   const _node1 = getNodeFromPath(_node, pathToNode)
   if (err(_node1)) return _node1
-  const { node: sketchExpression } = _node1
 
   // determine if sketchExpression is in a pipeExpression or not
   const _node2 = getNodeFromPath<PipeExpression>(
@@ -274,9 +294,6 @@ export function extrudeSketch(
     'PipeExpression'
   )
   if (err(_node2)) return _node2
-  const { node: pipeExpression } = _node2
-
-  const isInPipeExpression = pipeExpression.type === 'PipeExpression'
 
   const _node3 = getNodeFromPath<VariableDeclarator>(
     _node,
@@ -284,49 +301,23 @@ export function extrudeSketch(
     'VariableDeclarator'
   )
   if (err(_node3)) return _node3
-  const { node: variableDeclarator, shallowPath: pathToDecleration } = _node3
+  const { node: variableDeclarator } = _node3
 
   const extrudeCall = createCallExpressionStdLib('extrude', [
     distance,
-    shouldPipe
+    createIdentifier(variableDeclarator.id.name),
-      ? createPipeSubstitution()
-      : createIdentifier(variableDeclarator.id.name),
   ])
 
-  if (shouldPipe) {
-    const pipeChain = createPipeExpression(
-      isInPipeExpression
-        ? [...pipeExpression.body, extrudeCall]
-        : [sketchExpression as any, extrudeCall]
-    )
-
-    variableDeclarator.init = pipeChain
-    const pathToExtrudeArg: PathToNode = [
-      ...pathToDecleration,
-      ['init', 'VariableDeclarator'],
-      ['body', ''],
-      [pipeChain.body.length - 1, 'index'],
-      ['arguments', 'CallExpression'],
-      [0, 'index'],
-    ]
-
-    return {
-      modifiedAst: _node,
-      pathToNode,
-      pathToExtrudeArg,
-    }
-  }
-
   // We're not creating a pipe expression,
   // but rather a separate constant for the extrusion
   const name = findUniqueName(node, KCL_DEFAULT_CONSTANT_PREFIXES.EXTRUDE)
   const VariableDeclaration = createVariableDeclaration(name, extrudeCall)
 
-  const sketchIndexInPathToNode =
+  const lastSketchNodePath =
-    pathToDecleration.findIndex((a) => a[0] === 'body') + 1
+    orderedSketchNodePaths[orderedSketchNodePaths.length - 1]
-  const sketchIndexInBody = pathToDecleration[
+
-    sketchIndexInPathToNode
+  console.log('lastSketchNodePath', lastSketchNodePath, orderedSketchNodePaths)
-  ][0] as number
+  const sketchIndexInBody = Number(lastSketchNodePath[1][0])
   _node.body.splice(sketchIndexInBody + 1, 0, VariableDeclaration)
 
   const pathToExtrudeArg: PathToNode = [
@@ -1307,7 +1298,8 @@ export async function deleteFromSelection(
     const pipeBody = varDec.node.init.body
     if (
       pipeBody[0].type === 'CallExpression' &&
-      pipeBody[0].callee.name === 'startSketchOn'
+      (pipeBody[0].callee.name === 'startSketchOn' ||
+        pipeBody[0].callee.name === 'startProfileAt')
     ) {
       // remove varDec
       const varDecIndex = varDec.shallowPath[1][0] as number
@@ -1322,3 +1314,149 @@ export async function deleteFromSelection(
 const nonCodeMetaEmpty = () => {
   return { nonCodeNodes: {}, startNodes: [], start: 0, end: 0 }
 }
+
+export function getInsertIndex(
+  sketchNodePaths: PathToNode[],
+  planeNodePath: PathToNode,
+  insertType: 'start' | 'end'
+) {
+  let minIndex = 0
+  let maxIndex = 0
+  for (const path of sketchNodePaths) {
+    const index = Number(path[1][0])
+    if (index < minIndex) minIndex = index
+    if (index > maxIndex) maxIndex = index
+  }
+
+  const insertIndex = !sketchNodePaths.length
+    ? Number(planeNodePath[1][0]) + 1
+    : insertType === 'start'
+    ? minIndex
+    : maxIndex + 1
+  return insertIndex
+}
+
+export function updateSketchNodePathsWithInsertIndex({
+  insertIndex,
+  insertType,
+  sketchNodePaths,
+}: {
+  insertIndex: number
+  insertType: 'start' | 'end'
+  sketchNodePaths: PathToNode[]
+}): {
+  updatedEntryNodePath: PathToNode
+  updatedSketchNodePaths: PathToNode[]
+} {
+  // TODO the rest of this function will not be robust to work for sketches defined within a function declaration
+  const newExpressionPathToNode: PathToNode = [
+    ['body', ''],
+    [insertIndex, 'index'],
+    ['declaration', 'VariableDeclaration'],
+    ['init', 'VariableDeclarator'],
+  ]
+  let updatedSketchNodePaths = structuredClone(sketchNodePaths)
+  if (insertType === 'start') {
+    updatedSketchNodePaths = updatedSketchNodePaths.map((path) => {
+      path[1][0] = Number(path[1][0]) + 1
+      return path
+    })
+    updatedSketchNodePaths.unshift(newExpressionPathToNode)
+  } else {
+    updatedSketchNodePaths.push(newExpressionPathToNode)
+  }
+  return {
+    updatedSketchNodePaths,
+    updatedEntryNodePath: newExpressionPathToNode,
+  }
+}
+
+/**
+ * 
+ * Split the following pipe expression into 
+ * ```ts
+ * part001 = startSketchOn('XZ')
+  |> startProfileAt([1, 2], %)
+  |> line([3, 4], %)
+  |> line([5, 6], %)
+  |> close(%)
+extrude001 = extrude(5, part001)
+```
+into
+```ts
+sketch001 = startSketchOn('XZ')
+part001 = startProfileAt([1, 2], sketch001)
+  |> line([3, 4], %)
+  |> line([5, 6], %)
+  |> close(%)
+extrude001 = extrude(5, part001)
+```
+Notice that the `startSketchOn` is what gets the new variable name, this is so part001 still has the same data as before
+making it safe for later code that uses part001 (the extrude in this example)
+ * 
+ */
+export function splitPipedProfile(
+  ast: Program,
+  pathToPipe: PathToNode
+):
+  | {
+      modifiedAst: Program
+      pathToProfile: PathToNode
+      pathToPlane: PathToNode
+    }
+  | Error {
+  const _ast = structuredClone(ast)
+  const varDec = getNodeFromPath<VariableDeclaration>(
+    _ast,
+    pathToPipe,
+    'VariableDeclaration'
+  )
+  if (err(varDec)) return varDec
+  if (
+    varDec.node.type !== 'VariableDeclaration' ||
+    varDec.node.declaration.init.type !== 'PipeExpression'
+  ) {
+    return new Error('pathToNode does not point to pipe')
+  }
+  const init = varDec.node.declaration.init
+  const firstCall = init.body[0]
+  if (!isCallExprWithName(firstCall, 'startSketchOn'))
+    return new Error('First call is not startSketchOn')
+  const secondCall = init.body[1]
+  if (!isCallExprWithName(secondCall, 'startProfileAt'))
+    return new Error('Second call is not startProfileAt')
+
+  const varName = varDec.node.declaration.id.name
+  const newVarName = findUniqueName(_ast, 'sketch')
+  const secondCallArgs = structuredClone(secondCall.arguments)
+  secondCallArgs[1] = createIdentifier(newVarName)
+  const firstCallOfNewPipe = createCallExpression(
+    'startProfileAt',
+    secondCallArgs
+  )
+  const newSketch = createVariableDeclaration(
+    newVarName,
+    varDec.node.declaration.init.body[0]
+  )
+  const newProfile = createVariableDeclaration(
+    varName,
+    varDec.node.declaration.init.body.length <= 2
+      ? firstCallOfNewPipe
+      : createPipeExpression([
+          firstCallOfNewPipe,
+          ...varDec.node.declaration.init.body.slice(2),
+        ])
+  )
+  const index = getBodyIndex(pathToPipe)
+  if (err(index)) return index
+  _ast.body.splice(index, 1, newSketch, newProfile)
+  const pathToPlane = structuredClone(pathToPipe)
+  const pathToProfile = structuredClone(pathToPipe)
+  pathToProfile[1][0] = index + 1
+
+  return {
+    modifiedAst: _ast,
+    pathToProfile,
+    pathToPlane,
+  }
+}

src/lang/modifyAst/addEdgeTreatment.test.ts

@@ -275,7 +275,7 @@ const runModifyAstCloneWithEdgeTreatmentAndTag = async (
   const selection: Selections = {
     graphSelections: segmentRanges.map((segmentRange) => {
       const maybeArtifact = [...artifactGraph].find(([, a]) => {
-        if (!('codeRef' in a)) return false
+        if (!('codeRef' in a && a.codeRef)) return false
         return isOverlap(a.codeRef.range, segmentRange)
       })
       return {

src/lang/modifyAst/addRevolve.ts

@@ -5,7 +5,6 @@ import {
   PathToNode,
   Expr,
   CallExpression,
-  PipeExpression,
   VariableDeclarator,
 } from 'lang/wasm'
 import { Selections } from 'lib/selections'
@@ -15,7 +14,6 @@ import {
   createCallExpressionStdLib,
   createObjectExpression,
   createIdentifier,
-  createPipeExpression,
   findUniqueName,
   createVariableDeclaration,
 } from 'lang/modifyAst'
@@ -24,12 +22,13 @@ import {
   mutateAstWithTagForSketchSegment,
   getEdgeTagCall,
 } from 'lang/modifyAst/addEdgeTreatment'
+import { Artifact, getPathsFromArtifact } from 'lang/std/artifactGraph'
 export function revolveSketch(
   ast: Node<Program>,
   pathToSketchNode: PathToNode,
-  shouldPipe = false,
   angle: Expr = createLiteral(4),
-  axis: Selections
+  axis: Selections,
+  artifact?: Artifact
 ):
   | {
       modifiedAst: Node<Program>
@@ -37,6 +36,11 @@ export function revolveSketch(
       pathToRevolveArg: PathToNode
     }
   | Error {
+  const orderedSketchNodePaths = getPathsFromArtifact({
+    artifact: artifact,
+    sketchPathToNode: pathToSketchNode,
+  })
+  if (err(orderedSketchNodePaths)) return orderedSketchNodePaths
   const clonedAst = structuredClone(ast)
   const sketchNode = getNodeFromPath(clonedAst, pathToSketchNode)
   if (err(sketchNode)) return sketchNode
@@ -67,29 +71,13 @@ export function revolveSketch(
   if (err(tagResult)) return tagResult
   const { tag } = tagResult
 
-  /* Original Code */
-  const { node: sketchExpression } = sketchNode
-
-  // determine if sketchExpression is in a pipeExpression or not
-  const sketchPipeExpressionNode = getNodeFromPath<PipeExpression>(
-    clonedAst,
-    pathToSketchNode,
-    'PipeExpression'
-  )
-  if (err(sketchPipeExpressionNode)) return sketchPipeExpressionNode
-  const { node: sketchPipeExpression } = sketchPipeExpressionNode
-  const isInPipeExpression = sketchPipeExpression.type === 'PipeExpression'
-
   const sketchVariableDeclaratorNode = getNodeFromPath<VariableDeclarator>(
     clonedAst,
     pathToSketchNode,
     'VariableDeclarator'
   )
   if (err(sketchVariableDeclaratorNode)) return sketchVariableDeclaratorNode
-  const {
+  const { node: sketchVariableDeclarator } = sketchVariableDeclaratorNode
-    node: sketchVariableDeclarator,
-    shallowPath: sketchPathToDecleration,
-  } = sketchVariableDeclaratorNode
 
   const axisSelection = axis?.graphSelections[0]?.artifact
 
@@ -103,37 +91,13 @@ export function revolveSketch(
     createIdentifier(sketchVariableDeclarator.id.name),
   ])
 
-  if (shouldPipe) {
-    const pipeChain = createPipeExpression(
-      isInPipeExpression
-        ? [...sketchPipeExpression.body, revolveCall]
-        : [sketchExpression as any, revolveCall]
-    )
-
-    sketchVariableDeclarator.init = pipeChain
-    const pathToRevolveArg: PathToNode = [
-      ...sketchPathToDecleration,
-      ['init', 'VariableDeclarator'],
-      ['body', ''],
-      [pipeChain.body.length - 1, 'index'],
-      ['arguments', 'CallExpression'],
-      [0, 'index'],
-    ]
-
-    return {
-      modifiedAst: clonedAst,
-      pathToSketchNode,
-      pathToRevolveArg,
-    }
-  }
-
   // We're not creating a pipe expression,
   // but rather a separate constant for the extrusion
   const name = findUniqueName(clonedAst, KCL_DEFAULT_CONSTANT_PREFIXES.REVOLVE)
   const VariableDeclaration = createVariableDeclaration(name, revolveCall)
-  const sketchIndexInPathToNode =
+  const lastSketchNodePath =
-    sketchPathToDecleration.findIndex((a) => a[0] === 'body') + 1
+    orderedSketchNodePaths[orderedSketchNodePaths.length - 1]
-  const sketchIndexInBody = sketchPathToDecleration[sketchIndexInPathToNode][0]
+  const sketchIndexInBody = Number(lastSketchNodePath[1][0])
   if (typeof sketchIndexInBody !== 'number')
     return new Error('expected sketchIndexInBody to be a number')
   clonedAst.body.splice(sketchIndexInBody + 1, 0, VariableDeclaration)

src/lang/queryAst.ts

@@ -33,6 +33,7 @@ import { err, Reason } from 'lib/trap'
 import { ImportStatement } from 'wasm-lib/kcl/bindings/ImportStatement'
 import { Node } from 'wasm-lib/kcl/bindings/Node'
 import { ArtifactGraph, codeRefFromRange } from './std/artifactGraph'
+import { FunctionExpression } from 'wasm-lib/kcl/bindings/FunctionExpression'
 
 /**
  * Retrieves a node from a given path within a Program node structure, optionally stopping at a specified node type.
@@ -597,7 +598,13 @@ export function findAllPreviousVariables(
 type ReplacerFn = (
   _ast: Node<Program>,
   varName: string
-) => { modifiedAst: Node<Program>; pathToReplaced: PathToNode } | Error
+) =>
+  | {
+      modifiedAst: Node<Program>
+      pathToReplaced: PathToNode
+      exprInsertIndex: number
+    }
+  | Error
 
 export function isNodeSafeToReplacePath(
   ast: Program,
@@ -649,7 +656,7 @@ export function isNodeSafeToReplacePath(
     if (err(_nodeToReplace)) return _nodeToReplace
     const nodeToReplace = _nodeToReplace.node as any
     nodeToReplace[last[0]] = identifier
-    return { modifiedAst: _ast, pathToReplaced }
+    return { modifiedAst: _ast, pathToReplaced, exprInsertIndex: index }
   }
 
   const hasPipeSub = isTypeInValue(finVal as Expr, 'PipeSubstitution')
@@ -768,8 +775,15 @@ export function isLinesParallelAndConstrained(
     if (err(_primarySegment)) return _primarySegment
     const primarySegment = _primarySegment.segment
 
+    const _varDec2 = getNodeFromPath(ast, secondaryPath, 'VariableDeclaration')
+    if (err(_varDec2)) return _varDec2
+    const varDec2 = _varDec2.node
+    const varName2 = (varDec2 as VariableDeclaration)?.declaration.id?.name
+    const sg2 = sketchFromKclValue(programMemory?.get(varName2), varName2)
+    if (err(sg2)) return sg2
+
     const _segment = getSketchSegmentFromSourceRange(
-      sg,
+      sg2,
       secondaryLine?.codeRef?.range
     )
     if (err(_segment)) return _segment
@@ -1083,3 +1097,57 @@ export function getObjExprProperty(
   if (index === -1) return null
   return { expr: node.properties[index].value, index }
 }
+
+export function isCursorInFunctionDefinition(
+  ast: Node<Program>,
+  selectionRanges: Selection
+): boolean {
+  if (!selectionRanges?.codeRef?.pathToNode) return false
+  const node = getNodeFromPath<FunctionExpression>(
+    ast,
+    selectionRanges.codeRef.pathToNode,
+    'FunctionExpression'
+  )
+  if (err(node)) return false
+  if (node.node.type === 'FunctionExpression') return true
+  return false
+}
+
+export function getBodyIndex(pathToNode: PathToNode): number | Error {
+  const index = Number(pathToNode[1][0])
+  if (Number.isInteger(index)) return index
+  return new Error('Expected number index')
+}
+
+export function isCallExprWithName(
+  expr: Expr | CallExpression,
+  name: string
+): expr is CallExpression {
+  if (expr.type === 'CallExpression' && expr.callee.type === 'Identifier') {
+    return expr.callee.name === name
+  }
+  return false
+}
+
+export function doesSketchPipeNeedSplitting(
+  ast: Node<Program>,
+  pathToPipe: PathToNode
+): boolean | Error {
+  const varDec = getNodeFromPath<VariableDeclarator>(
+    ast,
+    pathToPipe,
+    'VariableDeclarator'
+  )
+  if (err(varDec)) return varDec
+  if (varDec.node.type !== 'VariableDeclarator') return new Error('Not a var')
+  const pipeExpression = varDec.node.init
+  if (pipeExpression.type !== 'PipeExpression') return false
+  const [firstPipe, secondPipe] = pipeExpression.body
+  if (!firstPipe || !secondPipe) return false
+  if (
+    isCallExprWithName(firstPipe, 'startSketchOn') &&
+    isCallExprWithName(secondPipe, 'startProfileAt')
+  )
+    return true
+  return false
+}

src/lang/std/__snapshots__/artifactGraph.test.ts.snap

@@ -212,6 +212,19 @@ Map {
     "type": "wall",
   },
   "UUID-10" => {
+    "codeRef": {
+      "pathToNode": [
+        [
+          "body",
+          "",
+        ],
+      ],
+      "range": [
+        312,
+        344,
+        true,
+      ],
+    },
     "edgeCutEdgeIds": [],
     "id": "UUID",
     "pathIds": [

src/lang/std/artifactGraph.test.ts

@@ -823,6 +823,10 @@ describe('testing getArtifactsToUpdate', () => {
       },
       {
         type: 'wall',
+        codeRef: {
+          pathToNode: [['body', '']],
+          range: [312, 344, true],
+        },
         id: expect.any(String),
         segId: expect.any(String),
         edgeCutEdgeIds: [],

src/lang/std/artifactGraph.ts

@@ -1,6 +1,7 @@
 import {
   ArtifactCommand,
   ExecState,
+  Expr,
   PathToNode,
   Program,
   SourceRange,
@@ -9,6 +10,7 @@ import {
 import { Models } from '@kittycad/lib'
 import { getNodePathFromSourceRange } from 'lang/queryAst'
 import { err } from 'lib/trap'
+import { engineCommandManager, kclManager } from 'lib/singletons'
 import { Node } from 'wasm-lib/kcl/bindings/Node'
 
 export type ArtifactId = string
@@ -42,14 +44,14 @@ export interface PathArtifact extends BaseArtifact {
   codeRef: CodeRef
 }
 
-interface solid2D extends BaseArtifact {
+interface Solid2DArtifact extends BaseArtifact {
   type: 'solid2D'
   pathId: ArtifactId
 }
 export interface PathArtifactRich extends BaseArtifact {
   type: 'path'
   /** A path must always lie on a plane */
-  plane: PlaneArtifact | WallArtifact
+  plane: PlaneArtifact | WallArtifact | CapArtifact
   /** A path must always contain 0 or more segments */
   segments: Array<SegmentArtifact>
   /** A path may not result in a sweep artifact */
@@ -69,7 +71,7 @@ interface SegmentArtifactRich extends BaseArtifact {
   type: 'segment'
   path: PathArtifact
   surf: WallArtifact
-  edges: Array<SweepEdge>
+  edges: Array<SweepEdgeArtifact>
   edgeCut?: EdgeCut
   codeRef: CodeRef
 }
@@ -88,7 +90,7 @@ interface SweepArtifactRich extends BaseArtifact {
   subType: 'extrusion' | 'revolve'
   path: PathArtifact
   surfaces: Array<WallArtifact | CapArtifact>
-  edges: Array<SweepEdge>
+  edges: Array<SweepEdgeArtifact>
   codeRef: CodeRef
 }
 
@@ -98,6 +100,9 @@ interface WallArtifact extends BaseArtifact {
   edgeCutEdgeIds: Array<ArtifactId>
   sweepId: ArtifactId
   pathIds: Array<ArtifactId>
+  // codeRef is for the sketchOnFace plane, not for the wall itself
+  // traverse to the extrude and or segment to get the wall's codeRef
+  codeRef?: CodeRef
 }
 interface CapArtifact extends BaseArtifact {
   type: 'cap'
@@ -105,9 +110,12 @@ interface CapArtifact extends BaseArtifact {
   edgeCutEdgeIds: Array<ArtifactId>
   sweepId: ArtifactId
   pathIds: Array<ArtifactId>
+  // codeRef is for the sketchOnFace plane, not for the wall itself
+  // traverse to the extrude and or segment to get the wall's codeRef
+  codeRef?: CodeRef
 }
 
-interface SweepEdge extends BaseArtifact {
+interface SweepEdgeArtifact extends BaseArtifact {
   type: 'sweepEdge'
   segId: ArtifactId
   sweepId: ArtifactId
@@ -137,10 +145,10 @@ export type Artifact =
   | SweepArtifact
   | WallArtifact
   | CapArtifact
-  | SweepEdge
+  | SweepEdgeArtifact
   | EdgeCut
   | EdgeCutEdge
-  | solid2D
+  | Solid2DArtifact
 
 export type ArtifactGraph = Map<ArtifactId, Artifact>
 
@@ -289,6 +297,22 @@ export function getArtifactsToUpdate({
             edgeCutEdgeIds: existingPlane.edgeCutEdgeIds,
             sweepId: existingPlane.sweepId,
             pathIds: existingPlane.pathIds,
+            codeRef: existingPlane.codeRef,
+          },
+        },
+      ]
+    } else if (existingPlane?.type === 'cap') {
+      return [
+        {
+          id: currentPlaneId,
+          artifact: {
+            type: 'cap',
+            subType: existingPlane.subType,
+            id: currentPlaneId,
+            edgeCutEdgeIds: existingPlane.edgeCutEdgeIds,
+            sweepId: existingPlane.sweepId,
+            pathIds: existingPlane.pathIds,
+            codeRef: existingPlane.codeRef,
           },
         },
       ]
@@ -333,6 +357,18 @@ export function getArtifactsToUpdate({
           pathIds: [id],
         },
       })
+    } else if (plane?.type === 'cap') {
+      returnArr.push({
+        id: currentPlaneId,
+        artifact: {
+          type: 'cap',
+          id: currentPlaneId,
+          subType: plane.subType,
+          edgeCutEdgeIds: plane.edgeCutEdgeIds,
+          sweepId: plane.sweepId,
+          pathIds: [id],
+        },
+      })
     }
     return returnArr
   } else if (cmd.type === 'extend_path' || cmd.type === 'close_path') {
@@ -412,16 +448,33 @@ export function getArtifactsToUpdate({
           const path = getArtifact(seg.pathId)
           if (path?.type === 'path' && seg?.type === 'segment') {
             lastPath = path
+            const extraArtifact = Object.values(execStateArtifacts).find(
+              (a) => a?.type === 'StartSketchOnFace' && a.faceId === face_id
+            )
+            const sketchOnFaceSourceRange = extraArtifact?.sourceRange
+            const wallArtifact: Artifact = {
+              type: 'wall',
+              id: face_id,
+              segId: curve_id,
+              edgeCutEdgeIds: [],
+              sweepId: path.sweepId,
+              pathIds: [],
+            }
+
+            if (sketchOnFaceSourceRange) {
+              const range: SourceRange = [
+                sketchOnFaceSourceRange[0],
+                sketchOnFaceSourceRange[1],
+                true,
+              ]
+              wallArtifact.codeRef = {
+                range,
+                pathToNode: getNodePathFromSourceRange(ast, range),
+              }
+            }
             returnArr.push({
               id: face_id,
-              artifact: {
+              artifact: wallArtifact,
-                type: 'wall',
-                id: face_id,
-                segId: curve_id,
-                edgeCutEdgeIds: [],
-                sweepId: path.sweepId,
-                pathIds: [],
-              },
             })
             returnArr.push({
               id: curve_id,
@@ -445,16 +498,33 @@ export function getArtifactsToUpdate({
       if ((cap === 'top' || cap === 'bottom') && face_id) {
         const path = lastPath
         if (path?.type === 'path') {
+          const extraArtifact = Object.values(execStateArtifacts).find(
+            (a) => a?.type === 'StartSketchOnFace' && a.faceId === face_id
+          )
+          const sketchOnFaceSourceRange = extraArtifact?.sourceRange
+          const capArtifact: Artifact = {
+            type: 'cap',
+            id: face_id,
+            subType: cap === 'bottom' ? 'start' : 'end',
+            edgeCutEdgeIds: [],
+            sweepId: path.sweepId,
+            pathIds: [],
+          }
+          if (sketchOnFaceSourceRange) {
+            const range: SourceRange = [
+              sketchOnFaceSourceRange[0],
+              sketchOnFaceSourceRange[1],
+              true,
+            ]
+
+            capArtifact.codeRef = {
+              range,
+              pathToNode: getNodePathFromSourceRange(ast, range),
+            }
+          }
           returnArr.push({
             id: face_id,
-            artifact: {
+            artifact: capArtifact,
-              type: 'cap',
-              id: face_id,
-              subType: cap === 'bottom' ? 'start' : 'end',
-              edgeCutEdgeIds: [],
-              sweepId: path.sweepId,
-              pathIds: [],
-            },
           })
           const sweep = getArtifact(path.sweepId)
           if (sweep?.type !== 'sweep') return
@@ -738,7 +808,7 @@ export function getCapCodeRef(
 }
 
 export function getSolid2dCodeRef(
-  solid2D: solid2D,
+  solid2D: Solid2DArtifact,
   artifactGraph: ArtifactGraph
 ): CodeRef | Error {
   const path = getArtifactOfTypes(
@@ -762,7 +832,7 @@ export function getWallCodeRef(
 }
 
 export function getSweepEdgeCodeRef(
-  edge: SweepEdge,
+  edge: SweepEdgeArtifact,
   artifactGraph: ArtifactGraph
 ): CodeRef | Error {
   const seg = getArtifactOfTypes(
@@ -877,6 +947,205 @@ export function codeRefFromRange(range: SourceRange, ast: Program): CodeRef {
   }
 }
 
+function getPlaneFromPath(
+  path: PathArtifact,
+  graph: ArtifactGraph
+): PlaneArtifact | WallArtifact | CapArtifact | Error {
+  const plane = getArtifactOfTypes(
+    { key: path.planeId, types: ['plane', 'wall', 'cap'] },
+    graph
+  )
+  if (err(plane)) return plane
+  return plane
+}
+
+function getPlaneFromSegment(
+  segment: SegmentArtifact,
+  graph: ArtifactGraph
+): PlaneArtifact | WallArtifact | CapArtifact | Error {
+  const path = getArtifactOfTypes(
+    { key: segment.pathId, types: ['path'] },
+    graph
+  )
+  if (err(path)) return path
+  return getPlaneFromPath(path, graph)
+}
+function getPlaneFromSolid2D(
+  solid2D: Solid2DArtifact,
+  graph: ArtifactGraph
+): PlaneArtifact | WallArtifact | CapArtifact | Error {
+  const path = getArtifactOfTypes(
+    { key: solid2D.pathId, types: ['path'] },
+    graph
+  )
+  if (err(path)) return path
+  return getPlaneFromPath(path, graph)
+}
+function getPlaneFromCap(
+  cap: CapArtifact,
+  graph: ArtifactGraph
+): PlaneArtifact | WallArtifact | CapArtifact | Error {
+  const sweep = getArtifactOfTypes(
+    { key: cap.sweepId, types: ['sweep'] },
+    graph
+  )
+  if (err(sweep)) return sweep
+  const path = getArtifactOfTypes({ key: sweep.pathId, types: ['path'] }, graph)
+  if (err(path)) return path
+  return getPlaneFromPath(path, graph)
+}
+function getPlaneFromWall(
+  wall: WallArtifact,
+  graph: ArtifactGraph
+): PlaneArtifact | WallArtifact | CapArtifact | Error {
+  const sweep = getArtifactOfTypes(
+    { key: wall.sweepId, types: ['sweep'] },
+    graph
+  )
+  if (err(sweep)) return sweep
+  const path = getArtifactOfTypes({ key: sweep.pathId, types: ['path'] }, graph)
+  if (err(path)) return path
+  return getPlaneFromPath(path, graph)
+}
+function getPlaneFromSweepEdge(edge: SweepEdgeArtifact, graph: ArtifactGraph) {
+  const sweep = getArtifactOfTypes(
+    { key: edge.sweepId, types: ['sweep'] },
+    graph
+  )
+  if (err(sweep)) return sweep
+  const path = getArtifactOfTypes({ key: sweep.pathId, types: ['path'] }, graph)
+  if (err(path)) return path
+  return getPlaneFromPath(path, graph)
+}
+
+export function getPlaneFromArtifact(
+  artifact: Artifact | undefined,
+  graph: ArtifactGraph
+): PlaneArtifact | WallArtifact | CapArtifact | Error {
+  if (!artifact) return new Error(`Artifact is undefined`)
+  if (artifact.type === 'plane') return artifact
+  if (artifact.type === 'path') return getPlaneFromPath(artifact, graph)
+  if (artifact.type === 'segment') return getPlaneFromSegment(artifact, graph)
+  if (artifact.type === 'solid2D') return getPlaneFromSolid2D(artifact, graph)
+  if (artifact.type === 'cap') return getPlaneFromCap(artifact, graph)
+  if (artifact.type === 'wall') return getPlaneFromWall(artifact, graph)
+  if (artifact.type === 'sweepEdge')
+    return getPlaneFromSweepEdge(artifact, graph)
+  return new Error(`Artifact type ${artifact.type} does not have a plane`)
+}
+
+const isExprSafe = (index: number): boolean => {
+  const expr = kclManager.ast.body?.[index]
+  if (!expr) {
+    return false
+  }
+  if (expr.type === 'ImportStatement' || expr.type === 'ReturnStatement') {
+    return false
+  }
+  if (expr.type === 'VariableDeclaration') {
+    const init = expr.declaration?.init
+    if (!init) return false
+    if (init.type === 'CallExpression') {
+      return false
+    }
+    if (init.type === 'BinaryExpression' && isNodeSafe(init)) {
+      return true
+    }
+    if (init.type === 'Literal' || init.type === 'MemberExpression') {
+      return true
+    }
+  }
+  return false
+}
+
+const onlyConsecutivePaths = (
+  orderedNodePaths: PathToNode[],
+  originalPath: PathToNode
+): PathToNode[] => {
+  const originalIndex = Number(
+    orderedNodePaths.find(
+      (path) => path[1][0] === originalPath[1][0]
+    )?.[1]?.[0] || 0
+  )
+
+  const minIndex = Number(orderedNodePaths[0][1][0])
+  const maxIndex = Number(orderedNodePaths[orderedNodePaths.length - 1][1][0])
+  const pathIndexMap: any = {}
+  orderedNodePaths.forEach((path) => {
+    const bodyIndex = Number(path[1][0])
+    pathIndexMap[bodyIndex] = path
+  })
+  const safePaths: PathToNode[] = []
+
+  // traverse expressions in either direction from the profile selected
+  // when the user entered sketch mode
+  for (let i = originalIndex; i <= maxIndex; i++) {
+    if (pathIndexMap[i]) {
+      safePaths.push(pathIndexMap[i])
+    } else if (!isExprSafe(i)) {
+      break
+    }
+  }
+  for (let i = originalIndex - 1; i >= minIndex; i--) {
+    if (pathIndexMap[i]) {
+      safePaths.unshift(pathIndexMap[i])
+    } else if (!isExprSafe(i)) {
+      break
+    }
+  }
+  return safePaths
+}
+
+export function getPathsFromPlaneArtifact(planeArtifact: PlaneArtifact) {
+  const nodePaths: PathToNode[] = []
+  for (const pathId of planeArtifact.pathIds) {
+    const path = engineCommandManager.artifactGraph.get(pathId)
+    if (!path) continue
+    if ('codeRef' in path && path.codeRef) {
+      // TODO should figure out why upstream the path is bad
+      const isNodePathBad = path.codeRef.pathToNode.length < 2
+      nodePaths.push(
+        isNodePathBad
+          ? getNodePathFromSourceRange(kclManager.ast, path.codeRef.range)
+          : path.codeRef.pathToNode
+      )
+    }
+  }
+  return onlyConsecutivePaths(nodePaths, nodePaths[0])
+}
+
+export function getPathsFromArtifact({
+  sketchPathToNode,
+  artifact,
+}: {
+  sketchPathToNode: PathToNode
+  artifact?: Artifact
+}): PathToNode[] | Error {
+  const plane = getPlaneFromArtifact(
+    artifact,
+    engineCommandManager.artifactGraph
+  )
+  if (err(plane)) return plane
+  const paths = getArtifactsOfTypes(
+    { keys: plane.pathIds, types: ['path'] },
+    engineCommandManager.artifactGraph
+  )
+  let nodePaths = [...paths.values()]
+    .map((path) => path.codeRef.pathToNode)
+    .sort((a, b) => Number(a[1][0]) - Number(b[1][0]))
+  return onlyConsecutivePaths(nodePaths, sketchPathToNode)
+}
+
+function isNodeSafe(node: Expr): boolean {
+  if (node.type === 'Literal' || node.type === 'MemberExpression') {
+    return true
+  }
+  if (node.type === 'BinaryExpression') {
+    return isNodeSafe(node.left) && isNodeSafe(node.right)
+  }
+  return false
+}
+
 /**
  * Get an artifact from a code source range
  */
@@ -885,7 +1154,7 @@ export function getArtifactFromRange(
   artifactGraph: ArtifactGraph
 ): Artifact | null {
   for (const artifact of artifactGraph.values()) {
-    if ('codeRef' in artifact) {
+    if ('codeRef' in artifact && artifact.codeRef) {
       const match =
         artifact.codeRef?.range[0] === range[0] &&
         artifact.codeRef.range[1] === range[1]

src/lang/std/engineConnection.ts

@@ -2090,14 +2090,22 @@ export class EngineCommandManager extends EventTarget {
   updateArtifactGraph(
     ast: Node<Program>,
     artifactCommands: ArtifactCommand[],
-    execStateArtifacts: ExecState['artifacts']
+    execStateArtifacts: ExecState['artifacts'],
+    isPartialExecution?: true,
   ) {
-    this.artifactGraph = createArtifactGraph({
+    const newGraphArtifacts = createArtifactGraph({
       artifactCommands,
       responseMap: this.responseMap,
       ast,
       execStateArtifacts,
     })
+    if (isPartialExecution) {
+      for (let [id, artifact] of newGraphArtifacts) {
+        this.artifactGraph.set(id, artifact)
+      }
+    } else {
+      this.artifactGraph = newGraphArtifacts
+    }
     // TODO check if these still need to be deferred once e2e tests are working again.
     if (this.artifactGraph.size) {
       this.deferredArtifactEmptied(null)
@@ -2190,7 +2198,11 @@ export class EngineCommandManager extends EventTarget {
     commandTypeToTarget: string
   ): string | undefined {
     for (const [artifactId, artifact] of this.artifactGraph) {
-      if ('codeRef' in artifact && isOverlap(range, artifact.codeRef.range)) {
+      if (
+        'codeRef' in artifact &&
+        artifact.codeRef &&
+        isOverlap(range, artifact.codeRef.range)
+      ) {
         if (commandTypeToTarget === artifact.type) return artifactId
       }
     }

src/lang/std/sketch.ts

@@ -297,14 +297,20 @@ export const lineTo: SketchLineHelper = {
   add: ({ node, pathToNode, segmentInput, replaceExistingCallback }) => {
     if (segmentInput.type !== 'straight-segment') return STRAIGHT_SEGMENT_ERR
     const to = segmentInput.to
-    const _node = { ...node }
+    const _node = structuredClone(node)
     const nodeMeta = getNodeFromPath<PipeExpression>(
       _node,
       pathToNode,
       'PipeExpression'
     )
     if (err(nodeMeta)) return nodeMeta
-    const { node: pipe } = nodeMeta
+    const varDec = getNodeFromPath<VariableDeclaration>(
+      _node,
+      pathToNode,
+      'VariableDeclaration'
+    )
+    if (err(varDec)) return varDec
+    const dec = varDec.node.declaration
 
     const newVals: [Expr, Expr] = [
       createLiteral(roundOff(to[0], 2)),
@@ -333,14 +339,20 @@ export const lineTo: SketchLineHelper = {
       ])
       if (err(result)) return result
       const { callExp, valueUsedInTransform } = result
-      pipe.body[callIndex] = callExp
+      if (dec.init.type === 'PipeExpression') {
+        dec.init.body[callIndex] = callExp
+      } else {
+        dec.init = callExp
+      }
       return {
         modifiedAst: _node,
         pathToNode,
         valueUsedInTransform: valueUsedInTransform,
       }
+    } else if (dec.init.type === 'PipeExpression') {
+      dec.init.body = [...dec.init.body, newLine]
     } else {
-      pipe.body = [...pipe.body, newLine]
+      dec.init = createPipeExpression([dec.init, newLine])
     }
     return {
       modifiedAst: _node,
@@ -663,11 +675,11 @@ export const xLine: SketchLineHelper = {
   add: ({ node, pathToNode, segmentInput, replaceExistingCallback }) => {
     if (segmentInput.type !== 'straight-segment') return STRAIGHT_SEGMENT_ERR
     const { from, to } = segmentInput
-    const _node = { ...node }
+    const _node = structuredClone(node)
     const getNode = getNodeFromPathCurry(_node, pathToNode)
-    const _node1 = getNode<PipeExpression>('PipeExpression')
+    const varDec = getNode<VariableDeclaration>('VariableDeclaration')
-    if (err(_node1)) return _node1
+    if (err(varDec)) return varDec
-    const { node: pipe } = _node1
+    const dec = varDec.node.declaration
 
     const newVal = createLiteral(roundOff(to[0] - from[0], 2))
 
@@ -682,7 +694,11 @@ export const xLine: SketchLineHelper = {
       ])
       if (err(result)) return result
       const { callExp, valueUsedInTransform } = result
-      pipe.body[callIndex] = callExp
+      if (dec.init.type === 'PipeExpression') {
+        dec.init.body[callIndex] = callExp
+      } else {
+        dec.init = callExp
+      }
       return {
         modifiedAst: _node,
         pathToNode,
@@ -694,7 +710,11 @@ export const xLine: SketchLineHelper = {
       newVal,
       createPipeSubstitution(),
     ])
-    pipe.body = [...pipe.body, newLine]
+    if (dec.init.type === 'PipeExpression') {
+      dec.init.body = [...dec.init.body, newLine]
+    } else {
+      dec.init = createPipeExpression([dec.init, newLine])
+    }
     return { modifiedAst: _node, pathToNode }
   },
   updateArgs: ({ node, pathToNode, input }) => {
@@ -731,11 +751,11 @@ export const yLine: SketchLineHelper = {
   add: ({ node, pathToNode, segmentInput, replaceExistingCallback }) => {
     if (segmentInput.type !== 'straight-segment') return STRAIGHT_SEGMENT_ERR
     const { from, to } = segmentInput
-    const _node = { ...node }
+    const _node = structuredClone(node)
     const getNode = getNodeFromPathCurry(_node, pathToNode)
-    const _node1 = getNode<PipeExpression>('PipeExpression')
+    const varDec = getNode<VariableDeclaration>('VariableDeclaration')
-    if (err(_node1)) return _node1
+    if (err(varDec)) return varDec
-    const { node: pipe } = _node1
+    const dec = varDec.node.declaration
     const newVal = createLiteral(roundOff(to[1] - from[1], 2))
     if (replaceExistingCallback) {
       const { index: callIndex } = splitPathAtPipeExpression(pathToNode)
@@ -748,7 +768,11 @@ export const yLine: SketchLineHelper = {
       ])
       if (err(result)) return result
       const { callExp, valueUsedInTransform } = result
-      pipe.body[callIndex] = callExp
+      if (dec.init.type === 'PipeExpression') {
+        dec.init.body[callIndex] = callExp
+      } else {
+        dec.init = callExp
+      }
       return {
         modifiedAst: _node,
         pathToNode,
@@ -760,7 +784,11 @@ export const yLine: SketchLineHelper = {
       newVal,
       createPipeSubstitution(),
     ])
-    pipe.body = [...pipe.body, newLine]
+    if (dec.init.type === 'PipeExpression') {
+      dec.init.body = [...dec.init.body, newLine]
+    } else {
+      dec.init = createPipeExpression([dec.init, newLine])
+    }
     return { modifiedAst: _node, pathToNode }
   },
   updateArgs: ({ node, pathToNode, input }) => {
@@ -2145,8 +2173,6 @@ function addTagToChamfer(
   if (err(variableDec)) return variableDec
   const isPipeExpression = pipeExpr.node.type === 'PipeExpression'
 
-  console.log('pipeExpr', pipeExpr, variableDec)
-  // const callExpr = isPipeExpression ? pipeExpr.node.body[pipeIndex] : variableDec.node.init
   const callExpr = isPipeExpression
     ? pipeExpr.node.body[pipeIndex]
     : variableDec.node.init
@@ -2227,7 +2253,6 @@ function addTagToChamfer(
   if (isPipeExpression) {
     pipeExpr.node.body.splice(pipeIndex, 0, newExpressionToInsert)
   } else {
-    console.log('yo', createPipeExpression([newExpressionToInsert, callExpr]))
     callExpr.arguments[1] = createPipeSubstitution()
     variableDec.node.init = createPipeExpression([
       newExpressionToInsert,

src/lang/util.ts

@@ -9,20 +9,47 @@ import {
 import { ArtifactGraph, filterArtifacts } from 'lang/std/artifactGraph'
 import { isOverlap } from 'lib/utils'
 
-export function updatePathToNodeFromMap(
+/**
-  oldPath: PathToNode,
+ * Updates pathToNode body indices to account for the insertion of an expression
-  pathToNodeMap: { [key: number]: PathToNode }
+ * PathToNode expression is after the insertion index, that the body index is incremented
+ * Negative insertion index means no insertion
+ */
+export function updatePathToNodePostExprInjection(
+  pathToNode: PathToNode,
+  exprInsertIndex: number
 ): PathToNode {
-  const updatedPathToNode = structuredClone(oldPath)
+  if (exprInsertIndex < 0) return pathToNode
-  let max = 0
+  const bodyIndex = Number(pathToNode[1][0])
-  Object.values(pathToNodeMap).forEach((path) => {
+  if (bodyIndex < exprInsertIndex) return pathToNode
-    const index = Number(path[1][0])
+  const clone = structuredClone(pathToNode)
-    if (index > max) {
+  clone[1][0] = bodyIndex + 1
-      max = index
+  return clone
-    }
+}
-  })
+
-  updatedPathToNode[1][0] = max
+export function updateSketchDetailsNodePaths({
-  return updatedPathToNode
+  sketchEntryNodePath,
+  sketchNodePaths,
+  planeNodePath,
+  exprInsertIndex,
+}: {
+  sketchEntryNodePath: PathToNode
+  sketchNodePaths: Array<PathToNode>
+  planeNodePath: PathToNode
+  exprInsertIndex: number
+}) {
+  return {
+    updatedSketchEntryNodePath: updatePathToNodePostExprInjection(
+      sketchEntryNodePath,
+      exprInsertIndex
+    ),
+    updatedSketchNodePaths: sketchNodePaths.map((path) =>
+      updatePathToNodePostExprInjection(path, exprInsertIndex)
+    ),
+    updatedPlaneNodePath: updatePathToNodePostExprInjection(
+      planeNodePath,
+      exprInsertIndex
+    ),
+  }
 }
 
 export function isCursorInSketchCommandRange(
@@ -31,7 +58,7 @@ export function isCursorInSketchCommandRange(
 ): string | false {
   const overlappingEntries = filterArtifacts(
     {
-      types: ['segment', 'path'],
+      types: ['segment', 'path', 'plane'],
       predicate: (artifact) => {
         return selectionRanges.graphSelections.some(
           (selection) =>

src/lang/wasm.ts

@@ -522,10 +522,6 @@ export const executor = async (
   if (programMemoryOverride !== null && err(programMemoryOverride))
     return Promise.reject(programMemoryOverride)
 
-  // eslint-disable-next-line @typescript-eslint/no-floating-promises
-  if (programMemoryOverride !== null && err(programMemoryOverride))
-    return Promise.reject(programMemoryOverride)
-
   try {
     let jsAppSettings = default_app_settings()
     if (!TEST) {

src/lib/rectangleTool.ts

@@ -29,7 +29,7 @@ import {
  */
 export const getRectangleCallExpressions = (
   rectangleOrigin: [number, number],
-  tags: [string, string, string]
+  tag: string
 ) => [
   createCallExpressionStdLib('angledLine', [
     createArrayExpression([
@@ -37,30 +37,28 @@ export const getRectangleCallExpressions = (
       createLiteral(0), // This will be the width of the rectangle
     ]),
     createPipeSubstitution(),
-    createTagDeclarator(tags[0]),
+    createTagDeclarator(tag),
   ]),
   createCallExpressionStdLib('angledLine', [
     createArrayExpression([
       createBinaryExpression([
-        createCallExpressionStdLib('segAng', [createIdentifier(tags[0])]),
+        createCallExpressionStdLib('segAng', [createIdentifier(tag)]),
         '+',
         createLiteral(90),
       ]), // 90 offset from the previous line
       createLiteral(0), // This will be the height of the rectangle
     ]),
     createPipeSubstitution(),
-    createTagDeclarator(tags[1]),
   ]),
   createCallExpressionStdLib('angledLine', [
     createArrayExpression([
-      createCallExpressionStdLib('segAng', [createIdentifier(tags[0])]), // same angle as the first line
+      createCallExpressionStdLib('segAng', [createIdentifier(tag)]), // same angle as the first line
       createUnaryExpression(
-        createCallExpressionStdLib('segLen', [createIdentifier(tags[0])]),
+        createCallExpressionStdLib('segLen', [createIdentifier(tag)]),
         '-'
       ), // negative height
     ]),
     createPipeSubstitution(),
-    createTagDeclarator(tags[2]),
   ]),
   createCallExpressionStdLib('lineTo', [
     createArrayExpression([
@@ -85,12 +83,12 @@ export function updateRectangleSketch(
   y: number,
   tag: string
 ) {
-  ;((pipeExpression.body[2] as CallExpression)
+  ;((pipeExpression.body[1] as CallExpression)
     .arguments[0] as ArrayExpression) = createArrayExpression([
     createLiteral(x >= 0 ? 0 : 180),
     createLiteral(Math.abs(x)),
   ])
-  ;((pipeExpression.body[3] as CallExpression)
+  ;((pipeExpression.body[2] as CallExpression)
     .arguments[0] as ArrayExpression) = createArrayExpression([
     createBinaryExpression([
       createCallExpressionStdLib('segAng', [createIdentifier(tag)]),
@@ -120,7 +118,7 @@ export function updateCenterRectangleSketch(
   let startY = originY - Math.abs(deltaY)
 
   // pipeExpression.body[1] is startProfileAt
-  let callExpression = pipeExpression.body[1]
+  let callExpression = pipeExpression.body[0]
   if (isCallExpression(callExpression)) {
     const arrayExpression = callExpression.arguments[0]
     if (isArrayExpression(arrayExpression)) {
@@ -134,7 +132,7 @@ export function updateCenterRectangleSketch(
   const twoX = deltaX * 2
   const twoY = deltaY * 2
 
-  callExpression = pipeExpression.body[2]
+  callExpression = pipeExpression.body[1]
   if (isCallExpression(callExpression)) {
     const arrayExpression = callExpression.arguments[0]
     if (isArrayExpression(arrayExpression)) {
@@ -148,7 +146,7 @@ export function updateCenterRectangleSketch(
     }
   }
 
-  callExpression = pipeExpression.body[3]
+  callExpression = pipeExpression.body[2]
   if (isCallExpression(callExpression)) {
     const arrayExpression = callExpression.arguments[0]
     if (isArrayExpression(arrayExpression)) {

src/lib/selections.ts

@@ -278,18 +278,19 @@ export function getEventForSegmentSelection(
   }
   if (!id || !group) return null
   const artifact = engineCommandManager.artifactGraph.get(id)
-  const codeRefs = getCodeRefsByArtifactId(
+  if (!artifact) return null
-    id,
+  const node = getNodeFromPath<Expr>(kclManager.ast, group.userData.pathToNode)
-    engineCommandManager.artifactGraph
+  if (err(node)) return null
-  )
-  if (!artifact || !codeRefs) return null
   return {
     type: 'Set selection',
     data: {
       selectionType: 'singleCodeCursor',
       selection: {
         artifact,
-        codeRef: codeRefs[0],
+        codeRef: {
+          pathToNode: group?.userData?.pathToNode,
+          range: [node.node.start, node.node.end, true],
+        },
       },
     },
   }
@@ -568,8 +569,7 @@ export function getSelectionTypeDisplayText(
   const selectionsByType = getSelectionCountByType(selection)
   if (selectionsByType === 'none') return null
 
-  return selectionsByType
+  return [...selectionsByType.entries()]
-    .entries()
     .map(
       // Hack for showing "face" instead of "extrude-wall" in command bar text
       ([type, count]) =>
@@ -578,7 +578,6 @@ export function getSelectionTypeDisplayText(
           .replace('solid2D', 'face')
           .replace('segment', 'face')}${count > 1 ? 's' : ''}`
     )
-    .toArray()
     .join(', ')
 }
 
@@ -588,7 +587,7 @@ export function canSubmitSelectionArg(
 ) {
   return (
     selectionsByType !== 'none' &&
-    selectionsByType.entries().every(([type, count]) => {
+    [...selectionsByType.entries()].every(([type, count]) => {
       const foundIndex = argument.selectionTypes.findIndex((s) => s === type)
       return (
         foundIndex !== -1 &&
@@ -611,7 +610,7 @@ export function codeToIdSelections(
       // TODO #868: loops over all artifacts will become inefficient at a large scale
       const overlappingEntries = Array.from(engineCommandManager.artifactGraph)
         .map(([id, artifact]) => {
-          if (!('codeRef' in artifact)) return null
+          if (!('codeRef' in artifact && artifact.codeRef)) return null
           return isOverlap(artifact.codeRef.range, selection.range)
             ? {
                 artifact,
@@ -862,7 +861,6 @@ export function updateSelections(
             JSON.stringify(pathToNode)
           ) {
             artifact = a
-            console.log('found artifact', a)
             break
           }
         }

src/lib/toolbar.ts

@@ -2,8 +2,6 @@ import { CustomIconName } from 'components/CustomIcon'
 import { DEV } from 'env'
 import { commandBarMachine } from 'machines/commandBarMachine'
 import {
-  canRectangleOrCircleTool,
-  isClosedSketch,
   isEditingExistingSketch,
   modelingMachine,
   pipeHasCircle,
@@ -72,7 +70,7 @@ export const toolbarConfig: Record<ToolbarModeName, ToolbarMode> = {
         icon: 'sketch',
         status: 'available',
         title: ({ sketchPathId }) =>
-          `${sketchPathId ? 'Edit' : 'Start'} Sketch`,
+          sketchPathId ? 'Edit Sketch' : 'Start Sketch',
         showTitle: true,
         hotkey: 'S',
         description: 'Start drawing a 2D sketch',
@@ -332,22 +330,14 @@ export const toolbarConfig: Record<ToolbarModeName, ToolbarMode> = {
       {
         id: 'line',
         onClick: ({ modelingState, modelingSend }) => {
-          if (modelingState.matches({ Sketch: { 'Line tool': 'No Points' } })) {
+          modelingSend({
-            // Exit the sketch state if there are no points and they press ESC
+            type: 'change tool',
-            modelingSend({
+            data: {
-              type: 'Cancel',
+              tool: !modelingState.matches({ Sketch: 'Line tool' })
-            })
+                ? 'line'
-          } else {
+                : 'none',
-            // Exit the tool if there are points and they press ESC
+            },
-            modelingSend({
+          })
-              type: 'change tool',
-              data: {
-                tool: !modelingState.matches({ Sketch: 'Line tool' })
-                  ? 'line'
-                  : 'none',
-              },
-            })
-          }
         },
         icon: 'line',
         status: 'available',
@@ -358,8 +348,7 @@ export const toolbarConfig: Record<ToolbarModeName, ToolbarMode> = {
           }) ||
           state.matches({
             Sketch: { 'Circle tool': 'Awaiting Radius' },
-          }) ||
+          }),
-          isClosedSketch(state.context),
         title: 'Line',
         hotkey: (state) =>
           state.matches({ Sketch: 'Line tool' }) ? ['Esc', 'L'] : 'L',
@@ -439,10 +428,7 @@ export const toolbarConfig: Record<ToolbarModeName, ToolbarMode> = {
           icon: 'circle',
           status: 'available',
           title: 'Center circle',
-          disabled: (state) =>
+          disabled: (state) => state.matches('Sketch no face'),
-            state.matches('Sketch no face') ||
-            (!canRectangleOrCircleTool(state.context) &&
-              !state.matches({ Sketch: 'Circle tool' })),
           isActive: (state) => state.matches({ Sketch: 'Circle tool' }),
           hotkey: (state) =>
             state.matches({ Sketch: 'Circle tool' }) ? ['Esc', 'C'] : 'C',
@@ -490,10 +476,7 @@ export const toolbarConfig: Record<ToolbarModeName, ToolbarMode> = {
             }),
           icon: 'rectangle',
           status: 'available',
-          disabled: (state) =>
+          disabled: (state) => state.matches('Sketch no face'),
-            state.matches('Sketch no face') ||
-            (!canRectangleOrCircleTool(state.context) &&
-              !state.matches({ Sketch: 'Rectangle tool' })),
           title: 'Corner rectangle',
           hotkey: (state) =>
             state.matches({ Sketch: 'Rectangle tool' }) ? ['Esc', 'R'] : 'R',
@@ -516,10 +499,7 @@ export const toolbarConfig: Record<ToolbarModeName, ToolbarMode> = {
             }),
           icon: 'arc',
           status: 'available',
-          disabled: (state) =>
+          disabled: (state) => state.matches('Sketch no face'),
-            state.matches('Sketch no face') ||
-            (!canRectangleOrCircleTool(state.context) &&
-              !state.matches({ Sketch: 'Center Rectangle tool' })),
           title: 'Center rectangle',
           hotkey: (state) =>
             state.matches({ Sketch: 'Center Rectangle tool' })

src/lib/trap.ts

@@ -97,3 +97,7 @@ export function trap<T>(
     })
   return true
 }
+
+export function reject(errOrString: Error | string): Promise<never> {
+  return Promise.reject(errOrString)
+}

src/routes/Onboarding/Introduction.tsx

@@ -109,7 +109,7 @@ function OnboardingWarningWeb(props: OnboardingResetWarningProps) {
           codeManager.updateCodeStateEditor(bracket)
           await codeManager.writeToFile()
 
-          await kclManager.executeCode(true)
+          await kclManager.executeCode({ zoomToFit: true })
           props.setShouldShowWarning(false)
         }, reportRejection)}
         nextText="Overwrite code and continue"

src/routes/Onboarding/Sketching.tsx

@@ -11,7 +11,7 @@ export default function Sketching() {
     async function clearEditor() {
       // We do want to update both the state and editor here.
       codeManager.updateCodeStateEditor('')
-      await kclManager.executeCode(true)
+      await kclManager.executeCode({ zoomToFit: true })
     }
 
     // eslint-disable-next-line @typescript-eslint/no-floating-promises

src/routes/Onboarding/index.tsx

@@ -100,7 +100,7 @@ export function useDemoCode() {
     setTimeout(
       toSync(async () => {
         codeManager.updateCodeStateEditor(bracket)
-        await kclManager.executeCode(true)
+        await kclManager.executeCode({ zoomToFit: true })
         await codeManager.writeToFile()
       }, reportRejection)
     )