Update snapshots

Signed-off-by: Nick Cameron <nrc@ncameron.org>

.env.development

@@ -9,7 +9,6 @@ VITE_KC_SITE_BASE_URL=https://dev.zoo.dev
 VITE_KC_SITE_APP_URL=https://app.dev.zoo.dev
 VITE_KC_SKIP_AUTH=false
 VITE_KC_CONNECTION_TIMEOUT_MS=5000
-#VITE_WASM_URL="optional way of overriding the wasm url, particular for unit tests which need this if you running not on the default 3000 port"
 #VITE_KC_DEV_TOKEN="optional token to skip auth in the app"
 #token="required token for playwright. TODO: clean up env vars in #3973"
 

.github/ISSUE_TEMPLATE/release.md

@@ -2,7 +2,7 @@
 name: Release
 about: Create a new release for the Zoo Design Studio
 title: "Cut release v1.?.?"
-labels: [meta/release]
+labels: [release]
 ---
 
 > Instructions: https://github.com/KittyCAD/modeling-app/blob/main/CONTRIBUTING.md#shipping-releases
@@ -19,8 +19,7 @@ Release builds URL: ???
 * [ ] Confirm the application opens (dismiss the updater)
 * [ ] Create a project with a basic Text-to-CAD prompt
 * [ ] Confirm the result is viewable in an engine stream
-* [ ] Use 'Check for updates' to bring back the updater toast
-* [ ] Confirm the app can update to the previous release
+* [ ] Open the application again and confirm the updater can downgrade
 
 ## macOS via ???
 
@@ -28,8 +27,7 @@ Release builds URL: ???
 * [ ] Confirm the application opens (dismiss the updater)
 * [ ] Create a project with a basic Text-to-CAD prompt
 * [ ] Confirm the result is viewable in an engine stream
-* [ ] Use 'Check for updates' to bring back the updater toast
-* [ ] Confirm the app can update to the previous release
+* [ ] Open the application again and confirm the updater can downgrade
 
 ## Linux via ???
 
@@ -37,5 +35,4 @@ Release builds URL: ???
 * [ ] Confirm the application opens (dismiss the updater)
 * [ ] Create a project with a basic Text-to-CAD prompt
 * [ ] Confirm the result is viewable in an engine stream
-* [ ] Use 'Check for updates' to bring back the updater toast
-* [ ] Confirm the app can update to the previous release
+* [ ] Open the application again and confirm the updater can downgrade

.github/workflows/build-apps.yml

@@ -43,7 +43,7 @@ jobs:
       - name: Download Wasm Cache
         id: download-wasm
         if: ${{ github.event_name == 'pull_request' && steps.filter.outputs.rust == 'false' }}
-        uses: dawidd6/action-download-artifact@v11
+        uses: dawidd6/action-download-artifact@v7
         continue-on-error: true
         with:
           github_token: ${{secrets.GITHUB_TOKEN}}
@@ -362,7 +362,7 @@ jobs:
 
       - name: Authenticate to Google Cloud
         if: ${{ env.IS_STAGING == 'true' }}
-        uses: 'google-github-actions/auth@v2.1.10'
+        uses: 'google-github-actions/auth@v2.1.8'
         with:
           credentials_json: '${{ secrets.GOOGLE_CLOUD_DL_SA }}'
 

.github/workflows/cargo-test.yml

@@ -25,8 +25,8 @@ jobs:
       - runner=8cpu-linux-x64
       - extras=s3-cache
     steps:
-      - uses: runs-on/action@v2
-      - uses: actions/create-github-app-token@v2
+      - uses: runs-on/action@v1
+      - uses: actions/create-github-app-token@v1
         id: app-token
         with:
           app-id: ${{ secrets.MODELING_APP_GH_APP_ID }}
@@ -149,8 +149,8 @@ jobs:
         partitionIndex: [1, 2, 3, 4, 5, 6]
         partitionTotal: [6]
     steps:
-      - uses: runs-on/action@v2
-      - uses: actions/create-github-app-token@v2
+      - uses: runs-on/action@v1
+      - uses: actions/create-github-app-token@v1
         id: app-token
         with:
           app-id: ${{ secrets.MODELING_APP_GH_APP_ID }}
@@ -207,8 +207,8 @@ jobs:
       - runner=32cpu-linux-x64
       - extras=s3-cache
     steps:
-      - uses: runs-on/action@v2
-      - uses: actions/create-github-app-token@v2
+      - uses: runs-on/action@v1
+      - uses: actions/create-github-app-token@v1
         id: app-token
         with:
           app-id: ${{ secrets.MODELING_APP_GH_APP_ID }}

.github/workflows/e2e-tests.yml

@@ -46,7 +46,7 @@ jobs:
       - name: Download Wasm cache
         id: download-wasm
         if: ${{ github.event_name != 'schedule' && steps.filter.outputs.rust == 'false' }}
-        uses: dawidd6/action-download-artifact@v11
+        uses: dawidd6/action-download-artifact@v7
         continue-on-error: true
         with:
           github_token: ${{secrets.GITHUB_TOKEN}}
@@ -110,7 +110,7 @@ jobs:
 
     steps:
 
-      - uses: actions/create-github-app-token@v2
+      - uses: actions/create-github-app-token@v1
         id: app-token
         with:
           app-id: ${{ secrets.MODELING_APP_GH_APP_ID }}
@@ -230,7 +230,7 @@ jobs:
 
     steps:
 
-      - uses: actions/create-github-app-token@v2
+      - uses: actions/create-github-app-token@v1
         id: app-token
         with:
           app-id: ${{ secrets.MODELING_APP_GH_APP_ID }}

.github/workflows/generate-website-docs.yml

@@ -20,7 +20,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - uses: actions/create-github-app-token@v2
+      - uses: actions/create-github-app-token@v1
         id: app-token
         with:
           # required

.github/workflows/kcl-language-server.yml

@@ -328,7 +328,7 @@ jobs:
           mkdir -p releases/language-server/${{ env.TAG }}
           cp -r build/* releases/language-server/${{ env.TAG }}
       - name: "Authenticate to Google Cloud"
-        uses: "google-github-actions/auth@v2.1.10"
+        uses: "google-github-actions/auth@v2.1.8"
         with:
           credentials_json: "${{ secrets.GOOGLE_CLOUD_DL_SA }}"
       - name: Set up Cloud SDK

.github/workflows/kcl-python-bindings.yml

@@ -113,7 +113,7 @@ jobs:
     steps:
       - uses: actions/checkout@v4
       - name: Install uv
-        uses: astral-sh/setup-uv@v6
+        uses: astral-sh/setup-uv@v5
       - uses: actions-rust-lang/setup-rust-toolchain@v1
       - uses: taiki-e/install-action@just
       - name: Run tests
@@ -130,7 +130,7 @@ jobs:
     steps:
       - uses: actions/checkout@v4
       - name: Install the latest version of uv
-        uses: astral-sh/setup-uv@v6
+        uses: astral-sh/setup-uv@v5
       - name: Install codespell
         run: |
           uv venv .venv
@@ -161,7 +161,7 @@ jobs:
         with:
           path: rust/kcl-python-bindings
       - name: Install the latest version of uv
-        uses: astral-sh/setup-uv@v6
+        uses: astral-sh/setup-uv@v5
       - name: do uv things
         run: |
           cd rust/kcl-python-bindings

.github/workflows/publish-apps-release.yml

@@ -108,7 +108,7 @@ jobs:
         run: npm run files:set-notes
 
       - name: Authenticate to Google Cloud
-        uses: 'google-github-actions/auth@v2.1.10'
+        uses: 'google-github-actions/auth@v2.1.8'
         with:
           credentials_json: '${{ secrets.GOOGLE_CLOUD_DL_SA }}'
 

.github/workflows/static-analysis.yml

@@ -120,36 +120,6 @@ jobs:
 
       - run: npm run circular-deps:diff
 
-  npm-url-checker:
-    runs-on: ubuntu-latest
-    needs: npm-build-wasm
-
-    steps:
-      - uses: actions/checkout@v4
-      - uses: actions/setup-node@v4
-        with:
-          node-version-file: '.nvmrc'
-          cache: 'npm'
-      - run: npm install
-
-      - name: Download all artifacts
-        uses: actions/download-artifact@v4
-
-      - name: Copy prepared wasm
-        run: |
-          ls -R prepared-wasm
-          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
-          mkdir rust/kcl-wasm-lib/pkg
-          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
-
-      - name: Copy prepared ts-rs bindings
-        run: |
-          ls -R prepared-ts-rs-bindings
-          mkdir rust/kcl-lib/bindings
-          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
-
-      - run: npm run url-checker:diff
-
   python-codespell:
     runs-on: ubuntu-22.04
     steps:

CONTRIBUTING.md

@@ -235,47 +235,6 @@ To display logging (to the terminal or console) set `ZOO_LOG=1`. This will log s
 
 To enable memory metrics, build with `--features dhat-heap`.
 
-## Running scripts
-
-There are multiple scripts under the folder path `./scripts` which can be used in various settings.
-
-### Pattern for a static file, npm run commands, and CI-CD checks
-
-If you want to implement a static checker follow this pattern. Two static checkers we have are circular dependency checks in our typescript code and url checker to see if any hard coded URL is the typescript application 404s. We have a set of known files in `./scripts/known/*.txt` which is the baseline.
-
-If you improve the baseline, run the overwrite command and commit the new smaller baseline. Try not to make the baseline bigger, the CI CD will complain.
-These baselines are to hold us to higher standards and help implement automated testing against the repository
-
-#### Output result to stdout
-- `npm run circular-deps`
-- `npm run url-checker`
-
-- create a `<name>.sh` file that will run the static checker then output the result to `stdout`
-
-#### Overwrite result to known .txt file on disk
-
-If the application needs to overwrite the known file on disk use this pattern. This known .txt file will be source controlled as the baseline
-
-- `npm run circular-deps:overwrite`
-- `npm run url-checker:overwrite`
-
-#### Diff baseline and current 
-
-These commands will write a /tmp/ file on disk and compare it to the known file in the repository. This command will also be used in the CI CD pipeline for automated checks
-
-- create a `diff-<name>.sh` file that is the script to diff your tmp file to the baseline
-e.g. `diff-url-checker.sh`
-```bash
-#!/bin/bash
-set -euo pipefail
-
-npm run url-checker > /tmp/urls.txt
-diff --ignore-blank-lines -w /tmp/urls.txt ./scripts/known/urls.txt
-```
-
-- `npm run circular-deps:diff`
-- `npm run url-checker:diff`
-
 ## Proposing changes
 
 Before you submit a contribution PR to this repo, please ensure that:
@@ -321,9 +280,6 @@ Assign someone to each section of the manual checklist generated by the issue te
 Follow the instructions [here](./rust/README.md) to publish new crates.
 This ensures that the KCL accepted by the app is also accepted by the CLI.
 
-If there are documentation changes, merge the corresponding Dependabot PRs [here](https://github.com/KittyCAD/website/pulls/app%2Fdependabot) for the website.
-You can trigger Dependabot to check for updates [here](https://github.com/KittyCAD/website/network/updates/17261214/jobs).
-
 #### 5. Publish the release
 
 Head over to https://github.com/KittyCAD/modeling-app/releases/new, pick the newly created tag and type it in the **Release title** field as well.

Makefile

@@ -62,10 +62,7 @@ else
 endif
 
 public/kcl-samples/manifest.json: $(KCL_SOURCES)
-ifndef WINDOWS
 	cd rust/kcl-lib && EXPECTORATE=overwrite cargo test generate_manifest
-	@ touch $@
-endif
 
 .vite/build/main.js: $(REACT_SOURCES) $(TYPESCRIPT_SOURCES) $(VITE_SOURCES)
 	npm run tronb:vite:dev

docs/kcl-lang/settings/user.md

@@ -83,13 +83,6 @@ Allow orbiting in sketch mode.
 Whether to show the debug panel, which lets you see various states of the app to aid in development.
 
 
-**Default:** None
-
-##### fixed_size_grid
-
-If true, the grid cells will be fixed-size, where the width is your default length unit. If false, the grid will get larger as you zoom out, and smaller as you zoom in.
-
-
 **Default:** None
 
 

docs/kcl-std/functions/std-sketch-involuteCircular.md

@@ -10,11 +10,9 @@ Extend the current sketch with a new involute circular curve.
 ```kcl
 involuteCircular(
   @sketch: Sketch,
+  startRadius: number(Length),
+  endRadius: number(Length),
   angle: number(Angle),
-  startRadius?: number(Length),
-  endRadius?: number(Length),
-  startDiameter?: number(Length),
-  endDiameter?: number(Length),
   reverse?: bool,
   tag?: TagDecl,
 ): Sketch
@@ -27,11 +25,9 @@ involuteCircular(
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `sketch` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) | Which sketch should this path be added to? | Yes |
+| `startRadius` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The involute is described between two circles, start_radius is the radius of the inner circle. | Yes |
+| `endRadius` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The involute is described between two circles, end_radius is the radius of the outer circle. | Yes |
 | `angle` | [`number(Angle)`](/docs/kcl-std/types/std-types-number) | The angle to rotate the involute by. A value of zero will produce a curve with a tangent along the x-axis at the start point of the curve. | Yes |
-| `startRadius` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The involute is described between two circles, startRadius is the radius of the inner circle. Either `startRadius` or `startDiameter` must be given (but not both). | No |
-| `endRadius` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The involute is described between two circles, endRadius is the radius of the outer circle. Either `endRadius` or `endDiameter` must be given (but not both). | No |
-| `startDiameter` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The involute is described between two circles, startDiameter describes the inner circle. Either `startRadius` or `startDiameter` must be given (but not both). | No |
-| `endDiameter` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The involute is described between two circles, endDiameter describes the outer circle. Either `endRadius` or `endDiameter` must be given (but not both). | No |
 | `reverse` | [`bool`](/docs/kcl-std/types/std-types-bool) | If reverse is true, the segment will start from the end of the involute, otherwise it will start from that start. | No |
 | `tag` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | Create a new tag which refers to this line. | No |
 

docs/kcl-std/functions/std-sketch-revolve.md

@@ -38,7 +38,7 @@ revolved around the same axis.
 | `sketches` | [`[Sketch; 1+]`](/docs/kcl-std/types/std-types-Sketch) | The sketch or set of sketches that should be revolved | Yes |
 | `axis` | [`Axis2d`](/docs/kcl-std/types/std-types-Axis2d) or [`Edge`](/docs/kcl-std/types/std-types-Edge) | Axis of revolution. | Yes |
 | `angle` | [`number(Angle)`](/docs/kcl-std/types/std-types-number) | Angle to revolve (in degrees). Default is 360. | No |
-| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Defines the smallest distance below which two entities are considered coincident, intersecting, coplanar, or similar. For most use cases, it should not be changed from its default value of 10^-7 millimeters. | No |
+| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Tolerance for the revolve operation. | No |
 | `symmetric` | [`bool`](/docs/kcl-std/types/std-types-bool) | If true, the extrusion will happen symmetrically around the sketch. Otherwise, the extrusion will happen on only one side of the sketch. | No |
 | `bidirectionalAngle` | [`number(Angle)`](/docs/kcl-std/types/std-types-number) | If specified, will also revolve in the opposite direction to 'angle' to the specified angle. If 'symmetric' is true, this value is ignored. | No |
 | `tagStart` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | A named tag for the face at the start of the revolve, i.e. the original sketch. | No |

docs/kcl-std/functions/std-solid-fillet.md

@@ -28,7 +28,7 @@ will smoothly blend the transition.
 | `solid` | [`Solid`](/docs/kcl-std/types/std-types-Solid) | The solid whose edges should be filletted | Yes |
 | `radius` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The radius of the fillet | Yes |
 | `tags` | [`[Edge; 1+]`](/docs/kcl-std/types/std-types-Edge) | The paths you want to fillet | Yes |
-| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Defines the smallest distance below which two entities are considered coincident, intersecting, coplanar, or similar. For most use cases, it should not be changed from its default value of 10^-7 millimeters. | No |
+| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The tolerance for this fillet | No |
 | `tag` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | Create a new tag which refers to this fillet | No |
 
 ### Returns

docs/kcl-std/functions/std-solid-intersect.md

@@ -24,7 +24,7 @@ verifying fit, and analyzing overlapping geometries in assemblies.
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `solids` | `[Solid; 2+]` | The solids to intersect. | Yes |
-| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Defines the smallest distance below which two entities are considered coincident, intersecting, coplanar, or similar. For most use cases, it should not be changed from its default value of 10^-7 millimeters. | No |
+| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The tolerance to use for the intersection operation. | No |
 
 ### Returns
 

docs/kcl-std/functions/std-solid-subtract.md

@@ -27,7 +27,7 @@ and complex multi-body part modeling.
 |----------|------|-------------|----------|
 | `solids` | [`[Solid; 1+]`](/docs/kcl-std/types/std-types-Solid) | The solids to use as the base to subtract from. | Yes |
 | `tools` | [`[Solid]`](/docs/kcl-std/types/std-types-Solid) | The solids to subtract. | Yes |
-| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Defines the smallest distance below which two entities are considered coincident, intersecting, coplanar, or similar. For most use cases, it should not be changed from its default value of 10^-7 millimeters. | No |
+| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The tolerance to use for the subtraction operation. | No |
 
 ### Returns
 

docs/kcl-std/functions/std-solid-union.md

@@ -21,7 +21,7 @@ union(
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `solids` | `[Solid; 2+]` | The solids to union. | Yes |
-| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Defines the smallest distance below which two entities are considered coincident, intersecting, coplanar, or similar. For most use cases, it should not be changed from its default value of 10^-7 millimeters. | No |
+| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The tolerance to use for the union operation. | No |
 
 ### Returns
 

docs/kcl-std/index.md

@@ -67,12 +67,10 @@ layout: manual
   * [`patternCircular2d`](/docs/kcl-std/functions/std-sketch-patternCircular2d)
   * [`patternLinear2d`](/docs/kcl-std/functions/std-sketch-patternLinear2d)
   * [`patternTransform2d`](/docs/kcl-std/functions/std-sketch-patternTransform2d)
-  * [`planeOf`](/docs/kcl-std/functions/std-sketch-planeOf)
   * [`polygon`](/docs/kcl-std/functions/std-sketch-polygon)
   * [`profileStart`](/docs/kcl-std/functions/std-sketch-profileStart)
   * [`profileStartX`](/docs/kcl-std/functions/std-sketch-profileStartX)
   * [`profileStartY`](/docs/kcl-std/functions/std-sketch-profileStartY)
-  * [`rectangle`](/docs/kcl-std/functions/std-sketch-rectangle)
   * [`revolve`](/docs/kcl-std/functions/std-sketch-revolve)
   * [`segAng`](/docs/kcl-std/functions/std-sketch-segAng)
   * [`segEnd`](/docs/kcl-std/functions/std-sketch-segEnd)

docs/kcl-std/modules/std-sketch.md

@@ -32,12 +32,10 @@ This module contains functions for creating and manipulating sketches, and makin
 * [`patternCircular2d`](/docs/kcl-std/functions/std-sketch-patternCircular2d)
 * [`patternLinear2d`](/docs/kcl-std/functions/std-sketch-patternLinear2d)
 * [`patternTransform2d`](/docs/kcl-std/functions/std-sketch-patternTransform2d)
-* [`planeOf`](/docs/kcl-std/functions/std-sketch-planeOf)
 * [`polygon`](/docs/kcl-std/functions/std-sketch-polygon)
 * [`profileStart`](/docs/kcl-std/functions/std-sketch-profileStart)
 * [`profileStartX`](/docs/kcl-std/functions/std-sketch-profileStartX)
 * [`profileStartY`](/docs/kcl-std/functions/std-sketch-profileStartY)
-* [`rectangle`](/docs/kcl-std/functions/std-sketch-rectangle)
 * [`revolve`](/docs/kcl-std/functions/std-sketch-revolve)
 * [`segAng`](/docs/kcl-std/functions/std-sketch-segAng)
 * [`segEnd`](/docs/kcl-std/functions/std-sketch-segEnd)

e2e/playwright/boolean.spec.ts

@@ -12,7 +12,7 @@ test.describe('Point and click for boolean workflows', () => {
     },
     {
       name: 'subtract',
-      code: 'subtract(extrude001, tools = extrude006)',
+      code: 'subtract([extrude001], tools = [extrude006])',
     },
     {
       name: 'intersect',
@@ -81,8 +81,6 @@ test.describe('Point and click for boolean workflows', () => {
         if (operationName !== 'subtract') {
           // should down shift key to select multiple objects
           await page.keyboard.down('Shift')
-        } else {
-          await cmdBar.progressCmdBar()
         }
 
         // Select second object
@@ -105,8 +103,8 @@ test.describe('Point and click for boolean workflows', () => {
           await cmdBar.expectState({
             stage: 'review',
             headerArguments: {
-              Solids: '1 path',
-              Tools: '1 path',
+              Tool: '1 path',
+              Target: '1 path',
             },
             commandName,
           })

e2e/playwright/can-create-sketches-on-all-planes-and-their-back-sides.spec.ts

@@ -5,7 +5,6 @@ import { uuidv4 } from '@src/lib/utils'
 import type { HomePageFixture } from '@e2e/playwright/fixtures/homePageFixture'
 import type { SceneFixture } from '@e2e/playwright/fixtures/sceneFixture'
 import type { ToolbarFixture } from '@e2e/playwright/fixtures/toolbarFixture'
-import type { CmdBarFixture } from '@e2e/playwright/fixtures/cmdBarFixture'
 import { getUtils } from '@e2e/playwright/test-utils'
 import { expect, test } from '@e2e/playwright/zoo-test'
 
@@ -15,18 +14,13 @@ test.describe('Can create sketches on all planes and their back sides', () => {
     homePage: HomePageFixture,
     scene: SceneFixture,
     toolbar: ToolbarFixture,
-    cmdBar: CmdBarFixture,
     plane: string,
     clickCoords: { x: number; y: number }
   ) => {
     const u = await getUtils(page)
-    // await page.addInitScript(() => {
-    //   localStorage.setItem('persistCode', '@settings(defaultLengthUnit = in)')
-    // })
     await page.setBodyDimensions({ width: 1200, height: 500 })
 
     await homePage.goToModelingScene()
-    // await scene.settled(cmdBar)
     const XYPlanRed: [number, number, number] = [98, 50, 51]
     await scene.expectPixelColor(XYPlanRed, { x: 700, y: 300 }, 15)
 
@@ -125,166 +119,12 @@ test.describe('Can create sketches on all planes and their back sides', () => {
   ]
 
   for (const config of planeConfigs) {
-    test(config.plane, async ({ page, homePage, scene, toolbar, cmdBar }) => {
+    test(config.plane, async ({ page, homePage, scene, toolbar }) => {
       await sketchOnPlaneAndBackSideTest(
         page,
         homePage,
         scene,
         toolbar,
-        cmdBar,
-        config.plane,
-        config.coords
-      )
-    })
-  }
-})
-test.describe('Can create sketches on offset planes and their back sides', () => {
-  const sketchOnPlaneAndBackSideTest = async (
-    page: Page,
-    homePage: HomePageFixture,
-    scene: SceneFixture,
-    toolbar: ToolbarFixture,
-    cmdbar: CmdBarFixture,
-    plane: string,
-    clickCoords: { x: number; y: number }
-  ) => {
-    const u = await getUtils(page)
-    await page.addInitScript(() => {
-      localStorage.setItem(
-        'persistCode',
-        `@settings(defaultLengthUnit = in)
-xyPlane = offsetPlane(XY, offset = 0.05)
-xzPlane = offsetPlane(XZ, offset = 0.05)
-yzPlane = offsetPlane(YZ, offset = 0.05)
-`
-      )
-    })
-    await page.setBodyDimensions({ width: 1200, height: 500 })
-
-    await homePage.goToModelingScene()
-    // await scene.settled(cmdbar)
-    const XYPlanRed: [number, number, number] = [74, 74, 74]
-    await scene.expectPixelColor(XYPlanRed, { x: 700, y: 300 }, 15)
-
-    await u.openDebugPanel()
-
-    const coord =
-      plane === '-XY' || plane === '-YZ' || plane === 'XZ' ? -100 : 100
-    const camCommand: EngineCommand = {
-      type: 'modeling_cmd_req',
-      cmd_id: uuidv4(),
-      cmd: {
-        type: 'default_camera_look_at',
-        center: { x: 0, y: 0, z: 0 },
-        vantage: { x: coord, y: coord, z: coord },
-        up: { x: 0, y: 0, z: 1 },
-      },
-    }
-    const updateCamCommand: EngineCommand = {
-      type: 'modeling_cmd_req',
-      cmd_id: uuidv4(),
-      cmd: {
-        type: 'default_camera_get_settings',
-      },
-    }
-
-    const prefix = plane.length === 3 ? '-' : ''
-    const planeName = plane
-      .slice(plane.length === 3 ? 1 : 0)
-      .toLocaleLowerCase()
-
-    const codeLine1 = `sketch001 = startSketchOn(${prefix}${planeName}Plane)`
-    const codeLine2 = `profile001 = startProfile(sketch001, at = [${0.91 + (plane[0] === '-' ? 0.01 : 0)}, -${1.21 + (plane[0] === '-' ? 0.01 : 0)}])`
-
-    await u.openDebugPanel()
-
-    await u.clearCommandLogs()
-    await page.getByRole('button', { name: 'Start Sketch' }).click()
-
-    await u.sendCustomCmd(camCommand)
-    await page.waitForTimeout(100)
-    await u.sendCustomCmd(updateCamCommand)
-
-    await u.closeDebugPanel()
-
-    await toolbar.openFeatureTreePane()
-    await toolbar.getDefaultPlaneVisibilityButton('XY').click()
-    await toolbar.getDefaultPlaneVisibilityButton('XZ').click()
-    await toolbar.getDefaultPlaneVisibilityButton('YZ').click()
-    await expect(
-      toolbar
-        .getDefaultPlaneVisibilityButton('YZ')
-        .locator('[aria-label="eye crossed out"]')
-    ).toBeVisible()
-
-    await page.mouse.click(clickCoords.x, clickCoords.y)
-    await page.waitForTimeout(600) // wait for animation
-
-    await toolbar.waitUntilSketchingReady()
-
-    await expect(
-      page.getByRole('button', { name: 'line Line', exact: true })
-    ).toBeVisible()
-
-    await u.closeDebugPanel()
-    await page.mouse.click(707, 393)
-
-    await expect(page.locator('.cm-content')).toContainText(codeLine1)
-    await expect(page.locator('.cm-content')).toContainText(codeLine2)
-
-    await page
-      .getByRole('button', { name: 'line Line', exact: true })
-      .first()
-      .click()
-    await u.openAndClearDebugPanel()
-    await page.getByRole('button', { name: 'Exit Sketch' }).click()
-    await u.expectCmdLog('[data-message-type="execution-done"]')
-
-    await u.clearCommandLogs()
-    await u.removeCurrentCode()
-  }
-
-  const planeConfigs = [
-    {
-      plane: 'XY',
-      coords: { x: 600, y: 388 },
-      description: 'red plane',
-    },
-    {
-      plane: 'YZ',
-      coords: { x: 700, y: 250 },
-      description: 'green plane',
-    },
-    {
-      plane: 'XZ',
-      coords: { x: 684, y: 427 },
-      description: 'blue plane',
-    },
-    {
-      plane: '-XY',
-      coords: { x: 600, y: 118 },
-      description: 'back of red plane',
-    },
-    {
-      plane: '-YZ',
-      coords: { x: 700, y: 219 },
-      description: 'back of green plane',
-    },
-    {
-      plane: '-XZ',
-      coords: { x: 700, y: 80 },
-      description: 'back of blue plane',
-    },
-  ]
-
-  for (const config of planeConfigs) {
-    test(config.plane, async ({ page, homePage, scene, toolbar, cmdBar }) => {
-      await sketchOnPlaneAndBackSideTest(
-        page,
-        homePage,
-        scene,
-        toolbar,
-        cmdBar,
         config.plane,
         config.coords
       )

e2e/playwright/code-pane-and-errors.spec.ts

@@ -265,8 +265,6 @@ middle(0)
     })
     await expect(
       page.getByText(`assert failed: Expected 0 to be greater than 0 but it wasn't
-
-Backtrace:
 assert()
 check()
 middle()`)

e2e/playwright/command-bar-tests.spec.ts

@@ -307,7 +307,7 @@ test.describe('Command bar tests', () => {
     )
 
     const continueButton = page.getByRole('button', { name: 'Continue' })
-    const submitButton = page.getByTestId('command-bar-submit')
+    const submitButton = page.getByRole('button', { name: 'Submit command' })
     await continueButton.click()
 
     // Review step and argument hotkeys
@@ -525,9 +525,7 @@ test.describe('Command bar tests', () => {
     const projectName = 'test'
     const beforeKclCode = `a = 5
 b = a * a
-c = 3 + a
-theta = 45deg
-`
+c = 3 + a`
     await context.folderSetupFn(async (dir) => {
       const testProject = join(dir, projectName)
       await fsp.mkdir(testProject, { recursive: true })
@@ -617,45 +615,9 @@ theta = 45deg
         stage: 'commandBarClosed',
       })
     })
-    await test.step(`Edit a parameter with explicit units via command bar`, async () => {
-      await cmdBar.cmdBarOpenBtn.click()
-      await cmdBar.chooseCommand('edit parameter')
-      await cmdBar
-        .selectOption({
-          name: 'theta',
-        })
-        .click()
-      await cmdBar.expectState({
-        stage: 'arguments',
-        commandName: 'Edit parameter',
-        currentArgKey: 'value',
-        currentArgValue: '45deg',
-        headerArguments: {
-          Name: 'theta',
-          Value: '',
-        },
-        highlightedHeaderArg: 'value',
-      })
-      await cmdBar.argumentInput
-        .locator('[contenteditable]')
-        .fill('45deg + 1deg')
-      await cmdBar.progressCmdBar()
-      await cmdBar.expectState({
-        stage: 'review',
-        commandName: 'Edit parameter',
-        headerArguments: {
-          Name: 'theta',
-          Value: '46deg',
-        },
-      })
-      await cmdBar.progressCmdBar()
-      await cmdBar.expectState({
-        stage: 'commandBarClosed',
-      })
-    })
 
     await editor.expectEditor.toContain(
-      `a = 5b = a * amyParameter001 = ${newValue}c = 3 + atheta = 45deg + 1deg`
+      `a = 5b = a * amyParameter001 = ${newValue}c = 3 + a`
     )
   })
 

e2e/playwright/desktop-export.spec.ts

@@ -54,7 +54,9 @@ test(
       await page.keyboard.press('Enter')
 
       // Click the checkbox
-      await cmdBar.submit()
+      const submitButton = page.getByText('Confirm Export')
+      await expect(submitButton).toBeVisible()
+      await page.keyboard.press('Enter')
 
       // Expect it to succeed
       const errorToastMessage = page.getByText(`Error while exporting`)
@@ -117,7 +119,9 @@ test(
       await page.keyboard.press('Enter')
 
       // Click the checkbox
-      await cmdBar.submit()
+      const submitButton = page.getByText('Confirm Export')
+      await expect(submitButton).toBeVisible()
+      await page.keyboard.press('Enter')
 
       // Look out for the toast message
       const exportingToastMessage = page.getByText(`Exporting...`)

e2e/playwright/editor-tests.spec.ts

@@ -288,7 +288,7 @@ a1 = startSketchOn(offsetPlane(XY, offset = 10))
     // error text on hover
     await page.hover('.cm-lint-marker-info')
     await expect(
-      page.getByText('Identifiers should be lowerCamelCase').first()
+      page.getByText('Identifiers must be lowerCamelCase').first()
     ).toBeVisible()
 
     await page.locator('#code-pane button:first-child').click()
@@ -314,7 +314,7 @@ sketch_001 = startSketchOn(XY)
     // error text on hover
     await page.hover('.cm-lint-marker-info')
     await expect(
-      page.getByText('Identifiers should be lowerCamelCase').first()
+      page.getByText('Identifiers must be lowerCamelCase').first()
     ).toBeVisible()
   })
 
@@ -511,7 +511,7 @@ sketch_001 = startSketchOn(XY)
     // error text on hover
     await page.hover('.cm-lint-marker-info')
     await expect(
-      page.getByText('Identifiers should be lowerCamelCase').first()
+      page.getByText('Identifiers must be lowerCamelCase').first()
     ).toBeVisible()
 
     // focus the editor
@@ -539,7 +539,7 @@ sketch_001 = startSketchOn(XY)
     // error text on hover
     await page.hover('.cm-lint-marker-info')
     await expect(
-      page.getByText('Identifiers should be lowerCamelCase').first()
+      page.getByText('Identifiers must be lowerCamelCase').first()
     ).toBeVisible()
   })
 
@@ -681,7 +681,7 @@ a1 = startSketchOn(offsetPlane(XY, offset = 10))
     // error text on hover
     await page.hover('.cm-lint-marker-info')
     await expect(
-      page.getByText('Identifiers should be lowerCamelCase').first()
+      page.getByText('Identifiers must be lowerCamelCase').first()
     ).toBeVisible()
 
     // select the line that's causing the error and delete it
@@ -912,7 +912,7 @@ a1 = startSketchOn(offsetPlane(XY, offset = 10))
     |> close()
     |> revolve(
     axis = revolveAxis,
-    angle = 90
+    angle = 90deg
     )
     `
       )
@@ -1617,33 +1617,4 @@ sketch001 = startSketchOn(XZ)
     // Verify error is still visible
     await expect(page.locator('.cm-lint-marker-error')).toHaveCount(1)
   })
-
-  test('Core dump hotkey', async ({ page, scene, cmdBar, homePage }) => {
-    await page.addInitScript(async () => {
-      localStorage.setItem(
-        'persistCode',
-        `sketch001 = startSketchOn(XZ)
-    profile001 = circle(sketch001, center = [-100.0, -100.0], radius = 50.0)
-`
-      )
-    })
-
-    const viewportSize = { width: 1200, height: 800 }
-    await page.setBodyDimensions(viewportSize)
-
-    await homePage.goToModelingScene()
-
-    await scene.connectionEstablished()
-    await scene.settled(cmdBar)
-
-    const modifier = process.platform === 'darwin' ? 'Meta' : 'Control'
-
-    await page.keyboard.press(`${modifier}+Shift+.`)
-
-    const toast1 = page.getByText('Starting core dump...')
-    await expect(toast1).toBeVisible()
-
-    const toast2 = page.getByText('Core dump completed')
-    await expect(toast2).toBeVisible()
-  })
 })

e2e/playwright/feature-tree-pane.spec.ts

@@ -229,12 +229,11 @@ test.describe('Feature Tree pane', () => {
     const initialCode = `sketch001 = startSketchOn(XZ)
       |> circle(center = [0, 0], radius = 5)
       renamedExtrude = extrude(sketch001, length = ${initialInput})`
-    const newParameterName = 'length001'
-    const expectedCode = `${newParameterName} = 23
+    const newConstantName = 'length001'
+    const expectedCode = `${newConstantName} = 23
     sketch001 = startSketchOn(XZ)
       |> circle(center = [0, 0], radius = 5)
-            renamedExtrude = extrude(sketch001, length = ${newParameterName})`
-    const editedParameterValue = '23 * 2'
+            renamedExtrude = extrude(sketch001, length = ${newConstantName})`
 
     await context.folderSetupFn(async (dir) => {
       const testDir = join(dir, 'test-sample')
@@ -280,7 +279,7 @@ test.describe('Feature Tree pane', () => {
       })
     })
 
-    await test.step('Add a parameter for distance argument and submit', async () => {
+    await test.step('Add a named constant for distance argument and submit', async () => {
       await expect(cmdBar.currentArgumentInput).toBeVisible()
       await cmdBar.variableCheckbox.click()
       await cmdBar.progressCmdBar()
@@ -297,43 +296,13 @@ test.describe('Feature Tree pane', () => {
         highlightedCode: '',
         diagnostics: [],
         activeLines: [
-          `renamedExtrude = extrude(sketch001, length = ${newParameterName})`,
+          `renamedExtrude = extrude(sketch001, length = ${newConstantName})`,
         ],
       })
       await editor.expectEditor.toContain(expectedCode, {
         shouldNormalise: true,
       })
     })
-
-    await test.step('Edit the parameter via the feature tree', async () => {
-      const parameter = await toolbar.getFeatureTreeOperation('Parameter', 0)
-      await parameter.dblclick()
-      await cmdBar.expectState({
-        commandName: 'Edit parameter',
-        currentArgKey: 'value',
-        currentArgValue: '23',
-        headerArguments: {
-          Name: newParameterName,
-          Value: '23',
-        },
-        stage: 'arguments',
-        highlightedHeaderArg: 'value',
-      })
-      await cmdBar.argumentInput
-        .locator('[contenteditable]')
-        .fill(editedParameterValue)
-      await cmdBar.progressCmdBar()
-      await cmdBar.expectState({
-        stage: 'review',
-        commandName: 'Edit parameter',
-        headerArguments: {
-          Name: newParameterName,
-          Value: '46', // Shows calculated result
-        },
-      })
-      await cmdBar.progressCmdBar()
-      await editor.expectEditor.toContain(editedParameterValue)
-    })
   })
   test(`User can edit an offset plane operation from the feature tree`, async ({
     context,

e2e/playwright/fixtures/cmdBarFixture.ts

@@ -118,11 +118,15 @@ export class CmdBarFixture {
       return
     }
 
-    const arrowButton = this.page.getByTestId('command-bar-continue')
+    const arrowButton = this.page.getByRole('button', {
+      name: 'arrow right Continue',
+    })
     if (await arrowButton.isVisible()) {
-      await this.continue()
+      await arrowButton.click()
     } else {
-      await this.submit()
+      await this.page
+        .getByRole('button', { name: 'checkmark Submit command' })
+        .click()
     }
   }
 
@@ -187,13 +191,6 @@ export class CmdBarFixture {
     return this.page.getByRole('option', options)
   }
 
-  /**
-   * Select an optional argument from the command bar during review
-   */
-  clickOptionalArgument = async (argName: string) => {
-    await this.page.getByTestId(`cmd-bar-add-optional-arg-${argName}`).click()
-  }
-
   /**
    * Clicks the Create new variable button for kcl input
    */

e2e/playwright/fixtures/editorFixture.ts

@@ -183,15 +183,14 @@ export class EditorFixture {
   scrollToText(text: string, placeCursor?: boolean) {
     return this.page.evaluate(
       (args: { text: string; placeCursor?: boolean }) => {
-        const editorView = window.editorManager.getEditorView()
         // error TS2339: Property 'docView' does not exist on type 'EditorView'.
         // Except it does so :shrug:
         // @ts-ignore
-        const index = editorView?.docView.view.state.doc
+        let index = window.editorManager._editorView?.docView.view.state.doc
           .toString()
           .indexOf(args.text)
-        editorView?.focus()
-        editorView?.dispatch({
+        window.editorManager._editorView?.focus()
+        window.editorManager._editorView?.dispatch({
           selection: window.EditorSelection.create([
             window.EditorSelection.cursor(index),
           ]),

e2e/playwright/fixtures/toolbarFixture.ts

@@ -274,13 +274,6 @@ export class ToolbarFixture {
       .nth(operationIndex)
   }
 
-  getDefaultPlaneVisibilityButton(plane: 'XY' | 'XZ' | 'YZ' = 'XY') {
-    const index = plane === 'XZ' ? 0 : plane === 'XY' ? 1 : 2
-    return this.featureTreePane
-      .getByTestId('feature-tree-visibility-toggle')
-      .nth(index)
-  }
-
   /**
    * View source on a specific operation in the Feature Tree pane.
    * @param operationName The name of the operation type

e2e/playwright/lib/api-reporter.ts

@@ -5,7 +5,7 @@ import type {
   FullResult,
 } from '@playwright/test/reporter'
 
-class APIReporter implements Reporter {
+class MyAPIReporter implements Reporter {
   private pendingRequests: Promise<void>[] = []
   private allResults: Record<string, any>[] = []
   private blockingResults: Record<string, any>[] = []
@@ -32,7 +32,7 @@ class APIReporter implements Reporter {
           'X-API-Key': process.env.TAB_API_KEY || '',
         }),
         body: JSON.stringify({
-          project: `${process.env.GITHUB_SERVER_URL}/${process.env.GITHUB_REPOSITORY}`,
+          project: 'https://github.com/KittyCAD/modeling-app',
           branch:
             process.env.GITHUB_HEAD_REF || process.env.GITHUB_REF_NAME || '',
           commit: process.env.CI_COMMIT_SHA || process.env.GITHUB_SHA || '',
@@ -60,7 +60,7 @@ class APIReporter implements Reporter {
 
     const payload = {
       // Required information
-      project: `${process.env.GITHUB_SERVER_URL}/${process.env.GITHUB_REPOSITORY}`,
+      project: 'https://github.com/KittyCAD/modeling-app',
       suite: process.env.CI_SUITE || 'e2e',
       branch: process.env.GITHUB_HEAD_REF || process.env.GITHUB_REF_NAME || '',
       commit: process.env.CI_COMMIT_SHA || process.env.GITHUB_SHA || '',
@@ -124,4 +124,4 @@ class APIReporter implements Reporter {
   }
 }
 
-export default APIReporter
+export default MyAPIReporter

e2e/playwright/projects.spec.ts

@@ -475,7 +475,6 @@ test.describe('Can export from electron app', () => {
               },
               tronApp.projectDirName,
               page,
-              cmdBar,
               method
             )
           )
@@ -780,6 +779,9 @@ test.describe(`Project management commands`, () => {
       const commandContinueButton = page.getByRole('button', {
         name: 'Continue',
       })
+      const commandSubmitButton = page.getByRole('button', {
+        name: 'Submit command',
+      })
       const toastMessage = page.getByText(`Successfully renamed`)
 
       await test.step(`Setup`, async () => {
@@ -798,7 +800,8 @@ test.describe(`Project management commands`, () => {
         await expect(commandContinueButton).toBeVisible()
         await commandContinueButton.click()
 
-        await cmdBar.submit()
+        await expect(commandSubmitButton).toBeVisible()
+        await commandSubmitButton.click()
 
         await expect(toastMessage).toBeVisible()
       })
@@ -834,6 +837,9 @@ test.describe(`Project management commands`, () => {
       })
       const projectNameOption = page.getByRole('option', { name: projectName })
       const commandWarning = page.getByText('Are you sure you want to delete?')
+      const commandSubmitButton = page.getByRole('button', {
+        name: 'Submit command',
+      })
       const toastMessage = page.getByText(`Successfully deleted`)
       const noProjectsMessage = page.getByText('No projects found')
 
@@ -853,7 +859,8 @@ test.describe(`Project management commands`, () => {
         await projectNameOption.click()
 
         await expect(commandWarning).toBeVisible()
-        await cmdBar.submit()
+        await expect(commandSubmitButton).toBeVisible()
+        await commandSubmitButton.click()
 
         await expect(toastMessage).toBeVisible()
       })
@@ -887,6 +894,9 @@ test.describe(`Project management commands`, () => {
       const commandContinueButton = page.getByRole('button', {
         name: 'Continue',
       })
+      const commandSubmitButton = page.getByRole('button', {
+        name: 'Submit command',
+      })
       const toastMessage = page.getByText(`Successfully renamed`)
 
       await test.step(`Setup`, async () => {
@@ -904,7 +914,8 @@ test.describe(`Project management commands`, () => {
         await expect(commandContinueButton).toBeVisible()
         await commandContinueButton.click()
 
-        await cmdBar.submit()
+        await expect(commandSubmitButton).toBeVisible()
+        await commandSubmitButton.click()
 
         await expect(toastMessage).toBeVisible()
       })
@@ -938,6 +949,9 @@ test.describe(`Project management commands`, () => {
       })
       const projectNameOption = page.getByRole('option', { name: projectName })
       const commandWarning = page.getByText('Are you sure you want to delete?')
+      const commandSubmitButton = page.getByRole('button', {
+        name: 'Submit command',
+      })
       const toastMessage = page.getByText(`Successfully deleted`)
       const noProjectsMessage = page.getByText('No projects found')
 
@@ -953,7 +967,8 @@ test.describe(`Project management commands`, () => {
         await projectNameOption.click()
 
         await expect(commandWarning).toBeVisible()
-        await cmdBar.submit()
+        await expect(commandSubmitButton).toBeVisible()
+        await commandSubmitButton.click()
 
         await expect(toastMessage).toBeVisible()
       })

e2e/playwright/regression-tests.spec.ts

@@ -1,7 +1,6 @@
 import path from 'path'
 import { bracket } from '@e2e/playwright/fixtures/bracket'
 import type { Page } from '@playwright/test'
-import type { CmdBarFixture } from '@e2e/playwright/fixtures/cmdBarFixture'
 import { reportRejection } from '@src/lib/trap'
 import * as fsp from 'fs/promises'
 
@@ -422,7 +421,10 @@ extrude002 = extrude(profile002, length = 150)
       await page.keyboard.press('Enter')
 
       // Click the checkbox
-      await cmdBar.submit()
+      const submitButton = page.getByText('Confirm Export')
+      await expect(submitButton).toBeVisible()
+
+      await page.keyboard.press('Enter')
 
       // Find the toast.
       // Look out for the toast message
@@ -459,7 +461,8 @@ extrude002 = extrude(profile002, length = 150)
       await page.keyboard.press('Enter')
 
       // Click the checkbox
-      await cmdBar.submit()
+      await expect(submitButton).toBeVisible()
+      await page.keyboard.press('Enter')
 
       // Find the toast.
       // Look out for the toast message
@@ -479,7 +482,6 @@ extrude002 = extrude(profile002, length = 150)
   test('ensure you CAN export while an export is already going', async ({
     page,
     homePage,
-    cmdBar,
   }) => {
     const u = await getUtils(page)
     await test.step('Set up the code and durations', async () => {
@@ -514,11 +516,11 @@ extrude002 = extrude(profile002, length = 150)
     const successToastMessage = page.getByText(`Exported successfully`)
 
     await test.step('second export', async () => {
-      await clickExportButton(page, cmdBar)
+      await clickExportButton(page)
 
       await expect(exportingToastMessage).toBeVisible()
 
-      await clickExportButton(page, cmdBar)
+      await clickExportButton(page)
 
       await test.step('The first export still succeeds', async () => {
         await Promise.all([
@@ -535,7 +537,7 @@ extrude002 = extrude(profile002, length = 150)
 
     await test.step('Successful, unblocked export', async () => {
       // Try exporting again.
-      await clickExportButton(page, cmdBar)
+      await clickExportButton(page)
 
       // Find the toast.
       // Look out for the toast message
@@ -878,7 +880,7 @@ s2 = startSketchOn(XY)
   })
 })
 
-async function clickExportButton(page: Page, cmdBar: CmdBarFixture) {
+async function clickExportButton(page: Page) {
   await test.step('Running export flow', async () => {
     // export the model
     const exportButton = page.getByTestId('export-pane-button')
@@ -894,6 +896,9 @@ async function clickExportButton(page: Page, cmdBar: CmdBarFixture) {
     await page.keyboard.press('Enter')
 
     // Click the checkbox
-    await cmdBar.submit()
+    const submitButton = page.getByText('Confirm Export')
+    await expect(submitButton).toBeVisible()
+
+    await page.keyboard.press('Enter')
   })
 }

e2e/playwright/sketch-tests.spec.ts

@@ -1478,7 +1478,6 @@ sketch001 = startSketchOn(XZ)
     await page.mouse.move(1200, 139)
     await page.mouse.down()
     await page.mouse.move(870, 250)
-    await page.mouse.up()
 
     await page.waitForTimeout(200)
 
@@ -1488,60 +1487,6 @@ sketch001 = startSketchOn(XZ)
     )
   })
 
-  test('Can undo with closed code pane', async ({
-    page,
-    homePage,
-    editor,
-    toolbar,
-    scene,
-    cmdBar,
-  }) => {
-    const u = await getUtils(page)
-
-    const viewportSize = { width: 1500, height: 750 }
-    await page.setBodyDimensions(viewportSize)
-
-    await page.addInitScript(async () => {
-      localStorage.setItem(
-        'persistCode',
-        `@settings(defaultLengthUnit=in)
-sketch001 = startSketchOn(XZ)
-  |> startProfile(at = [-10, -10])
-  |> line(end = [20.0, 10.0])
-  |> tangentialArc(end = [5.49, 8.37])`
-      )
-    })
-
-    await homePage.goToModelingScene()
-    await toolbar.waitForFeatureTreeToBeBuilt()
-    await scene.settled(cmdBar)
-
-    await (await toolbar.getFeatureTreeOperation('Sketch', 0)).dblclick()
-
-    await page.waitForTimeout(1000)
-
-    await page.mouse.move(1200, 139)
-    await page.mouse.down()
-    await page.mouse.move(870, 250)
-    await page.mouse.up()
-
-    await editor.expectEditor.toContain(`tangentialArc(end=[-5.85,4.32])`, {
-      shouldNormalise: true,
-    })
-
-    await u.closeKclCodePanel()
-
-    // Undo the last change
-    await page.keyboard.down('Control')
-    await page.keyboard.press('KeyZ')
-    await page.keyboard.up('Control')
-
-    await u.openKclCodePanel()
-    await editor.expectEditor.toContain(`tangentialArc(end = [5.49, 8.37])`, {
-      shouldNormalise: true,
-    })
-  })
-
   test('Can delete a single segment line with keyboard', async ({
     page,
     scene,
@@ -2155,8 +2100,8 @@ profile003 = startProfile(sketch001, at = [206.63, -56.73])
       )
       await crnRect1point2()
       await editor.expectEditor.toContain(
-        `|> angledLine(angle = 0, length = 2.37, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 7.8)
+        `|> angledLine(angle = 0deg, length = 2.37, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90deg, length = 7.8)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()`.replaceAll('\n', '')
@@ -2170,8 +2115,8 @@ profile003 = startProfile(sketch001, at = [206.63, -56.73])
       await crnRect2point2()
       await page.waitForTimeout(300)
       await editor.expectEditor.toContain(
-        `|> angledLine(angle = 0, length = 5.49, tag = $rectangleSegmentA002)
-  |> angledLine(angle = segAng(rectangleSegmentA002) - 90, length = 4.14)
+        `|> angledLine(angle = 0deg, length = 5.49, tag = $rectangleSegmentA002)
+  |> angledLine(angle = segAng(rectangleSegmentA002) - 90deg, length = 4.14)
   |> angledLine(angle = segAng(rectangleSegmentA002), length = -segLen(rectangleSegmentA002))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()`.replaceAll('\n', '')
@@ -2189,8 +2134,8 @@ profile003 = startProfile(sketch001, at = [206.63, -56.73])
       await cntrRect1point2()
       await page.waitForTimeout(300)
       await editor.expectEditor.toContain(
-        `|> angledLine(angle = 0, length = 7.06, tag = $rectangleSegmentA003)
-  |> angledLine(angle = segAng(rectangleSegmentA003) + 90, length = 4.34)
+        `|> angledLine(angle = 0deg, length = 7.06, tag = $rectangleSegmentA003)
+  |> angledLine(angle = segAng(rectangleSegmentA003) + 90deg, length = 4.34)
   |> angledLine(angle = segAng(rectangleSegmentA003), length = -segLen(rectangleSegmentA003))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()`.replaceAll('\n', '')
@@ -2205,8 +2150,8 @@ profile003 = startProfile(sketch001, at = [206.63, -56.73])
       await cntrRect2point2()
       await page.waitForTimeout(300)
       await editor.expectEditor.toContain(
-        `|> angledLine(angle = 0, length = 3.12, tag = $rectangleSegmentA004)
-  |> angledLine(angle = segAng(rectangleSegmentA004) + 90, length = 6.24)
+        `|> angledLine(angle = 0deg, length = 3.12, tag = $rectangleSegmentA004)
+  |> angledLine(angle = segAng(rectangleSegmentA004) + 90deg, length = 6.24)
   |> angledLine(angle = segAng(rectangleSegmentA004), length = -segLen(rectangleSegmentA004))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()`.replaceAll('\n', '')
@@ -2355,8 +2300,8 @@ profile001 = startProfile(sketch001, at = [6.24, 4.54])
   |> line(end = [8.61, 0.74])
   |> line(end = [10.99, -5.22])
 profile002 = startProfile(sketch001, at = [11.19, 5.02])
-  |> angledLine(angle = 0, length = 10.78, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 4.14)
+  |> angledLine(angle = 0deg, length = 10.78, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90deg, length = 4.14)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
@@ -2428,7 +2373,7 @@ profile004 = circleThreePoint(sketch001, p1 = [13.44, -6.8], p2 = [13.39, -2.07]
       await page.mouse.up()
       await page.waitForTimeout(200)
       await editor.expectEditor.toContain(
-        `angledLine(angle = -7, length = 10.27, tag = $rectangleSegmentA001)`
+        `angledLine(angle = -7deg, length = 10.27, tag = $rectangleSegmentA001)`
       )
     })
 
@@ -2470,8 +2415,8 @@ profile004 = circleThreePoint(sketch001, p1 = [13.44, -6.8], p2 = [13.39, -2.07]
       await page.waitForTimeout(100)
       await rectEnd()
       await editor.expectEditor.toContain(
-        `|> angledLine(angle = 180, length = 1.97, tag = $rectangleSegmentA002)
-  |> angledLine(angle = segAng(rectangleSegmentA002) + 90, length = 3.89)
+        `|> angledLine(angle = 180deg, length = 1.97, tag = $rectangleSegmentA002)
+  |> angledLine(angle = segAng(rectangleSegmentA002) + 90deg, length = 3.89)
   |> angledLine(angle = segAng(rectangleSegmentA002), length = -segLen(rectangleSegmentA002))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()`.replaceAll('\n', '')
@@ -2496,8 +2441,8 @@ profile001 = startProfile(sketch001, at = [6.24, 4.54])
   |> line(end = [8.61, 0.74])
   |> line(end = [10.99, -5.22])
 profile002 = startProfile(sketch001, at = [11.19, 5.02])
-  |> angledLine(angle = 0, length = 10.78, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 4.14)
+  |> angledLine(angle = 0deg, length = 10.78, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90deg, length = 4.14)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
@@ -2826,8 +2771,8 @@ profile002 = startProfile(sketch002, at = [0.75, 13.46])
   |> line(end = [4.52, 3.79])
   |> line(end = [5.98, -2.81])
 profile003 = startProfile(sketch002, at = [3.19, 13.3])
-  |> angledLine(angle = 0, length = 6.64, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 2.81)
+  |> angledLine(angle = 0deg, length = 6.64, tag = $rectangleSegmentA001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90deg, length = 2.81)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
@@ -2844,7 +2789,7 @@ profile006 = startProfile(sketch002, at = [9.65, 3.82])
   |> close()
 revolve001 = revolve(
   profile004,
-  angle = 45,
+  angle = 45deg,
   axis = getNextAdjacentEdge(seg01)
 )
 extrude002 = extrude(profile006, length = 4)
@@ -2868,8 +2813,8 @@ profile010 = circle(
   radius = 2.67
 )
 profile011 = startProfile(sketch003, at = [5.07, -6.39])
-  |> angledLine(angle = 0, length = 4.54, tag = $rectangleSegmentA002)
-  |> angledLine(angle = segAng(rectangleSegmentA002) - 90, length = 4.17)
+  |> angledLine(angle = 0deg, length = 4.54, tag = $rectangleSegmentA002)
+  |> angledLine(angle = segAng(rectangleSegmentA002) - 90deg, length = 4.17)
   |> angledLine(angle = segAng(rectangleSegmentA002), length = -segLen(rectangleSegmentA002))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
@@ -3021,7 +2966,7 @@ loft([profile001, profile002])
     )
     await rect1Crn2()
     await editor.expectEditor.toContain(
-      `angledLine(angle = 0, length = 113.01, tag = $rectangleSegmentA001)`
+      `angledLine(angle = 0deg, length = 113.01, tag = $rectangleSegmentA001)`
     )
   })
   test('Can enter sketch loft edges offsetPlane and continue sketch', async ({
@@ -3090,7 +3035,7 @@ loft([profile001, profile002])
     )
     await rect1Crn2()
     await editor.expectEditor.toContain(
-      `angledLine(angle = 0, length = 106.42], tag = $rectangleSegmentA001)`
+      `angledLine(angle = 0deg, length = 106.42], tag = $rectangleSegmentA001)`
     )
     await page.waitForTimeout(100)
   })
@@ -3312,8 +3257,8 @@ test.describe('manual edits during sketch mode', () => {
     extrude001 = extrude(profile001, length = 500)
     sketch002 = startSketchOn(extrude001, face = seg01)
     profile002 = startProfile(sketch002, at = [83.39, 329.15])
-      |> angledLine(angle = 0, length = 119.61, tag = $rectangleSegmentA001)
-      |> angledLine(length = 156.54, angle = -28)
+      |> angledLine(angle = 0deg, length = 119.61, tag = $rectangleSegmentA001)
+      |> angledLine(length = 156.54, angle = -28deg)
       |> angledLine(
           angle = -151,
           length = 116.27,
@@ -3351,7 +3296,9 @@ test.describe('manual edits during sketch mode', () => {
       await expect
         .poll(
           async () => {
-            await editor.expectEditor.toContain('length = 156.54, angle = -28')
+            await editor.expectEditor.toContain(
+              'length = 156.54, angle = -28deg'
+            )
             await page.mouse.move(handle1Location.x, handle1Location.y)
             await page.mouse.down()
             await page.mouse.move(
@@ -3362,7 +3309,9 @@ test.describe('manual edits during sketch mode', () => {
               }
             )
             await page.mouse.up()
-            await editor.expectEditor.toContain('length = 231.59, angle = -34')
+            await editor.expectEditor.toContain(
+              'length = 231.59, angle = -34deg'
+            )
             return true
           },
           { timeout: 10_000 }
@@ -3380,7 +3329,7 @@ test.describe('manual edits during sketch mode', () => {
 
     const handle2Location = { x: 872, y: 273 }
     await test.step('Edit sketch again', async () => {
-      await editor.expectEditor.toContain('length = 231.59, angle = -34')
+      await editor.expectEditor.toContain('length = 231.59, angle = -34deg')
       await page.waitForTimeout(500)
       await expect
         .poll(
@@ -3391,7 +3340,9 @@ test.describe('manual edits during sketch mode', () => {
               steps: 5,
             })
             await page.mouse.up()
-            await editor.expectEditor.toContain('length = 167.36, angle = -14')
+            await editor.expectEditor.toContain(
+              'length = 167.36, angle = -14deg'
+            )
             return true
           },
           { timeout: 10_000 }
@@ -3416,14 +3367,18 @@ test.describe('manual edits during sketch mode', () => {
       await expect
         .poll(
           async () => {
-            await editor.expectEditor.toContain('length = 167.36, angle = -14')
+            await editor.expectEditor.toContain(
+              'length = 167.36, angle = -14deg'
+            )
             await page.mouse.move(handle3Location.x, handle3Location.y)
             await page.mouse.down()
             await page.mouse.move(handle3Location.x, handle3Location.y + 110, {
               steps: 5,
             })
             await page.mouse.up()
-            await editor.expectEditor.toContain('length = 219.2, angle = -56')
+            await editor.expectEditor.toContain(
+              'length = 219.2, angle = -56deg'
+            )
             return true
           },
           { timeout: 10_000 }
@@ -3448,9 +3403,9 @@ profile001 = startProfile(sketch001, at = [106.68, 89.77])
 extrude001 = extrude(profile001, length = 500)
 sketch002 = startSketchOn(extrude001, face = seg01)
 profile002 = startProfile(sketch002, at = [83.39, 329.15])
-  |> angledLine(angle = 0, length = 119.61, tag = $rectangleSegmentA001)
-  |> angledLine(length = 219.2, angle = -56)
-  |> angledLine(angle = -151, length = 116.27)
+  |> angledLine(angle = 0deg, length = 119.61, tag = $rectangleSegmentA001)
+  |> angledLine(length = 219.2, angle = -56deg)
+  |> angledLine(angle = -151deg, length = 116.27)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 profile003 = startProfile(sketch002, at = [-201.08, 254.17])
@@ -3487,10 +3442,10 @@ profile003 = startProfile(sketch002, at = [-201.08, 254.17])
     extrude001 = extrude(profile001, length = 500)
     sketch002 = startSketchOn(extrude001, face = seg01)
     profile002 = startProfile(sketch002, at = [83.39, 329.15])
-      |> angledLine(angle = 0, length = 119.61, tag = $rectangleSegmentA001)
-      |> angledLine(length = 156.54, angle = -28)
+      |> angledLine(angle = 0deg, length = 119.61, tag = $rectangleSegmentA001)
+      |> angledLine(length = 156.54, angle = -28deg)
       |> angledLine(
-           angle = -151,
+           angle = -151deg,
            length = 116.27,
          )
       |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
@@ -3551,10 +3506,10 @@ profile003 = startProfile(sketch002, at = [-201.08, 254.17])
     extrude001 = extrude(profile001, length = 500)
     sketch002 = startSketchOn(extrude001, face = seg01)
     profile002 = startProfile(sketch002, at = [83.39, 329.15])
-      |> angledLine(angle = 0, length = 119.61, tag = $rectangleSegmentA001)
-      |> angledLine(length = 156.54, angle = -28)
+      |> angledLine(angle = 0deg, length = 119.61, tag = $rectangleSegmentA001)
+      |> angledLine(length = 156.54, angle = -28deg)
       |> angledLine(
-           angle = -151,
+           angle = -151deg,
            length = 116.27,
          )
       |> line(endAbsolute = [profileStartX(%), profileStartY(%)])

e2e/playwright/snapshot-tests.spec.ts

@@ -845,14 +845,14 @@ test.describe('code color goober', { tag: '@snapshot' }, () => {
 sweepPath = startSketchOn(XZ)
   |> startProfile(at = [0.05, 0.05])
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90, radius = 5)
+  |> tangentialArc(angle = 90deg, radius = 5)
   |> line(end = [-3, 0])
-  |> tangentialArc(angle = -90, radius = 5)
+  |> tangentialArc(angle = -90deg, radius = 5)
   |> line(end = [0, 7])
 
 sweepSketch = startSketchOn(XY)
   |> startProfile(at = [2, 0])
-  |> arc(angleStart = 0, angleEnd = 360, radius = 2)
+  |> arc(angleStart = 0, angleEnd = 360deg, radius = 2)
   |> sweep(path = sweepPath)
   |> appearance(
        color = "#bb00ff",
@@ -889,14 +889,14 @@ sweepSketch = startSketchOn(XY)
 sweepPath = startSketchOn(XZ)
   |> startProfile(at = [0.05, 0.05])
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90, radius = 5)
+  |> tangentialArc(angle = 90deg, radius = 5)
   |> line(end = [-3, 0])
-  |> tangentialArc(angle = -90, radius = 5)
+  |> tangentialArc(angle = -90deg, radius = 5)
   |> line(end = [0, 7])
 
 sweepSketch = startSketchOn(XY)
   |> startProfile(at = [2, 0])
-  |> arc(angleStart = 0, angleEnd = 360, radius = 2)
+  |> arc(angleStart = 0deg, angleEnd = 360deg, radius = 2)
   |> sweep(path = sweepPath)
   |> appearance(
        color = '#bb00ff',
@@ -934,14 +934,14 @@ sweepSketch = startSketchOn(XY)
 sweepPath = startSketchOn(XZ)
   |> startProfile(at = [0.05, 0.05])
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90, radius = 5)
+  |> tangentialArc(angle = 90deg, radius = 5)
   |> line(end = [-3, 0])
-  |> tangentialArc(angle = -90, radius = 5)
+  |> tangentialArc(angle = -90deg, radius = 5)
   |> line(end = [0, 7])
 
 sweepSketch = startSketchOn(XY)
   |> startProfile(at = [2, 0])
-  |> arc(angleStart = 0, angleEnd = 360, radius = 2)
+  |> arc(angleStart = 0deg, angleEnd = 360deg, radius = 2)
   |> sweep(path = sweepPath)
   |> appearance(
        color = "#bb00ff",

e2e/playwright/storageStates.ts

@@ -12,7 +12,6 @@ export const TEST_SETTINGS: DeepPartial<Settings> = {
     },
     onboarding_status: 'dismissed',
     show_debug_panel: true,
-    fixed_size_grid: false,
   },
   modeling: {
     enable_ssao: false,

e2e/playwright/test-utils.ts

@@ -22,7 +22,6 @@ export const token = process.env.token || ''
 import type { ProjectConfiguration } from '@rust/kcl-lib/bindings/ProjectConfiguration'
 
 import type { ElectronZoo } from '@e2e/playwright/fixtures/fixtureSetup'
-import type { CmdBarFixture } from '@e2e/playwright/fixtures/cmdBarFixture'
 import { isErrorWhitelisted } from '@e2e/playwright/lib/console-error-whitelist'
 import { TEST_SETTINGS, TEST_SETTINGS_KEY } from '@e2e/playwright/storageStates'
 import { test } from '@e2e/playwright/zoo-test'
@@ -159,10 +158,10 @@ async function openKclCodePanel(page: Page) {
   await page.evaluate(() => {
     // editorManager is available on the window object.
     //@ts-ignore this is in an entirely different context that tsc can't see.
-    editorManager.getEditorView().dispatch({
+    editorManager._editorView.dispatch({
       selection: {
         //@ts-ignore this is in an entirely different context that tsc can't see.
-        anchor: editorManager.getEditorView().docView.length,
+        anchor: editorManager._editorView.docView.length,
       },
       scrollIntoView: true,
     })
@@ -738,7 +737,6 @@ export const doExport = async (
   output: Models['OutputFormat3d_type'],
   rootDir: string,
   page: Page,
-  cmdBar: CmdBarFixture,
   exportFrom: 'dropdown' | 'sidebarButton' | 'commandBar' = 'dropdown'
 ): Promise<Paths> => {
   if (exportFrom === 'dropdown') {
@@ -782,7 +780,9 @@ export const doExport = async (
       .click()
     await page.locator('#arg-form').waitFor({ state: 'detached' })
   }
-  await cmdBar.submit()
+  await expect(page.getByText('Confirm Export')).toBeVisible()
+
+  await page.getByRole('button', { name: 'Submit command' }).click()
 
   await expect(page.getByText('Exported successfully')).toBeVisible()
 
@@ -880,10 +880,6 @@ export async function setup(
             },
             ...TEST_SETTINGS.project,
             onboarding_status: 'dismissed',
-            // Tests were written before this setting existed.
-            // It's true by default because it's a good user experience, but
-            // these tests require it to be false.
-            fixed_size_grid: false,
           },
           project: {
             ...TEST_SETTINGS.project,

e2e/playwright/testing-constraints.spec.ts

@@ -10,7 +10,7 @@ import {
 import { expect, test } from '@e2e/playwright/zoo-test'
 
 test.describe('Testing constraints', () => {
-  test('Can constrain line length', async ({ page, homePage, cmdBar }) => {
+  test('Can constrain line length', async ({ page, homePage }) => {
     await page.addInitScript(async () => {
       localStorage.setItem(
         'persistCode',
@@ -50,10 +50,14 @@ test.describe('Testing constraints', () => {
     await page.waitForTimeout(100)
     await page.getByTestId('constraint-length').click()
     await page.getByTestId('cmd-bar-arg-value').getByRole('textbox').fill('20')
-    await cmdBar.continue()
+    await page
+      .getByRole('button', {
+        name: 'arrow right Continue',
+      })
+      .click()
 
     await expect(page.locator('.cm-content')).toHaveText(
-      `length001 = 20sketch001 = startSketchOn(XY)  |> startProfile(at = [-10, -10])  |> line(end = [20, 0])  |> angledLine(angle = 90, length = length001)  |> xLine(length = -20)`
+      `length001 = 20sketch001 = startSketchOn(XY)  |> startProfile(at = [-10, -10])  |> line(end = [20, 0])  |> angledLine(angle = 90deg, length = length001)  |> xLine(length = -20)`
     )
 
     // Make sure we didn't pop out of sketch mode.
@@ -204,7 +208,9 @@ test.describe('Testing constraints', () => {
           .click()
 
         // Wait for the codemod to take effect
-        await expect(page.locator('.cm-content')).toContainText(`angle = -57,`)
+        await expect(page.locator('.cm-content')).toContainText(
+          `angle = -57deg,`
+        )
         await expect(page.locator('.cm-content')).toContainText(
           `offset = ${offset},`
         )
@@ -215,7 +221,7 @@ test.describe('Testing constraints', () => {
           `|> line(end = [74.36, 130.4], tag = $seg01)`
         )
         await expect(activeLinesContent[1]).toHaveText(
-          `  |> angledLineThatIntersects(angle = -57, offset = ${offset}, intersectTag = seg01)`
+          `  |> angledLineThatIntersects(angle = -57deg, offset = ${offset}, intersectTag = seg01)`
         )
 
         // checking the count of the overlays is a good proxy check that the client sketch scene is in a good state
@@ -466,7 +472,7 @@ test.describe('Testing constraints', () => {
         testName: 'No variable',
         addVariable: false,
         axisSelect: false,
-        value: 'segAng(seg01) + 22.69',
+        value: 'segAng(seg01) + 22.69deg',
       },
       {
         testName: 'Add variable, selecting axis',
@@ -478,7 +484,7 @@ test.describe('Testing constraints', () => {
         testName: 'No variable, selecting axis',
         addVariable: false,
         axisSelect: true,
-        value: 'turns::QUARTER_TURN - 7',
+        value: 'turns::QUARTER_TURN - 7deg',
       },
     ] as const
     for (const { testName, addVariable, value, axisSelect } of cases) {
@@ -581,7 +587,7 @@ test.describe('Testing constraints', () => {
         testName: 'Angle - No variable',
         addVariable: false,
         constraint: 'angle',
-        value: '83, 78.33',
+        value: '83deg, 78.33',
       },
     ] as const
     for (const { testName, addVariable, value, constraint } of cases) {
@@ -653,13 +659,13 @@ test.describe('Testing constraints', () => {
         testName: 'Length - Add variable',
         addVariable: true,
         constraint: 'length',
-        value: '83, length001',
+        value: '83deg, length001',
       },
       {
         testName: 'Length - No variable',
         addVariable: false,
         constraint: 'length',
-        value: '83, 78.33',
+        value: '83deg, 78.33',
       },
     ] as const
     for (const { testName, addVariable, value, constraint } of cases) {
@@ -677,6 +683,9 @@ test.describe('Testing constraints', () => {
           .getByRole('textbox')
         const cmdBarKclVariableNameInput =
           page.getByPlaceholder('Variable name')
+        const cmdBarSubmitButton = page.getByRole('button', {
+          name: 'arrow right Continue',
+        })
 
         await page.addInitScript(async () => {
           localStorage.setItem(
@@ -729,7 +738,7 @@ part002 = startSketchOn(XZ)
         await page.waitForTimeout(500)
         const [ang, len] = value.split(', ')
         const changedCode = `|> angledLine(angle = ${ang}, length = ${len})`
-        await cmdBar.continue()
+        await cmdBarSubmitButton.click()
         await expect(page.locator('.cm-content')).toContainText(changedCode)
 
         // checking active assures the cursor is where it should be
@@ -845,7 +854,7 @@ part002 = startSketchOn(XZ)
   test.describe('Two segment - no modal constraints', () => {
     const cases = [
       {
-        codeAfter: `|> angledLine(angle = 83, length = segLen(seg01))`,
+        codeAfter: `|> angledLine(angle = 83deg, length = segLen(seg01))`,
         constraintName: 'Equal Length',
       },
       {
@@ -1094,7 +1103,11 @@ part002 = startSketchOn(XZ)
     await page.waitForTimeout(500)
 
     await page.getByTestId('cmd-bar-arg-value').getByRole('textbox').fill('10')
-    await cmdBar.continue()
+    await page
+      .getByRole('button', {
+        name: 'arrow right Continue',
+      })
+      .click()
 
     await pollEditorLinesSelectedLength(page, 1)
     activeLinesContent = await page.locator('.cm-activeLine').all()
@@ -1163,7 +1176,7 @@ test.describe('Electron constraint tests', () => {
         await cmdBar.progressCmdBar()
         await editor.expectEditor.toContain('length001 = 15.3')
         await editor.expectEditor.toContain(
-          '|> angledLine(angle = 9, length = length001)'
+          '|> angledLine(angle = 9deg, length = length001)'
         )
       })
 

e2e/playwright/testing-samples-loading.spec.ts

@@ -21,7 +21,7 @@ test.describe('Testing loading external models', () => {
   // We have no more web tests
   test.fail(
     'Web: should overwrite current code, cannot create new file',
-    async ({ editor, context, page, homePage, cmdBar }) => {
+    async ({ editor, context, page, homePage }) => {
       const u = await getUtils(page)
       await test.step(`Test setup`, async () => {
         await context.addInitScript((code) => {
@@ -52,6 +52,9 @@ test.describe('Testing loading external models', () => {
           name,
         })
       const warningText = page.getByText('Overwrite current file with sample?')
+      const confirmButton = page.getByRole('button', {
+        name: 'Submit command',
+      })
 
       await test.step(`Precondition: check the initial code`, async () => {
         await u.openKclCodePanel()
@@ -67,7 +70,7 @@ test.describe('Testing loading external models', () => {
         await expect(commandMethodOption('Create new file')).not.toBeVisible()
         await commandMethodOption('Overwrite').click()
         await expect(warningText).toBeVisible()
-        await cmdBar.submit()
+        await confirmButton.click()
 
         await editor.expectEditor.toContain('// ' + newSample.title)
       })

e2e/playwright/testing-segment-overlays.spec.ts

@@ -3,7 +3,6 @@ import type { LineInputsType } from '@src/lang/std/sketchcombos'
 import { uuidv4 } from '@src/lib/utils'
 
 import type { EditorFixture } from '@e2e/playwright/fixtures/editorFixture'
-import type { CmdBarFixture } from '@e2e/playwright/fixtures/cmdBarFixture'
 import { deg, getUtils, wiggleMove } from '@e2e/playwright/test-utils'
 import { expect, test } from '@e2e/playwright/zoo-test'
 
@@ -19,7 +18,7 @@ test.describe('Testing segment overlays', () => {
      * @param {number} options.steps - The number of steps to perform
      */
     const _clickConstrained =
-      (page: Page, editor: EditorFixture, cmdBar: CmdBarFixture) =>
+      (page: Page, editor: EditorFixture) =>
       async ({
         hoverPos,
         constraintType,
@@ -94,7 +93,11 @@ test.describe('Testing segment overlays', () => {
           page.getByTestId('cmd-bar-arg-value').getByRole('textbox')
         ).toBeFocused()
         await page.waitForTimeout(500)
-        await cmdBar.continue()
+        await page
+          .getByRole('button', {
+            name: 'arrow right Continue',
+          })
+          .click()
         await editor.expectEditor.toContain(expectFinal, {
           shouldNormalise: true,
         })
@@ -110,7 +113,7 @@ test.describe('Testing segment overlays', () => {
      * @param {number} options.steps - The number of steps to perform
      */
     const _clickUnconstrained =
-      (page: Page, editor: EditorFixture, cmdBar: CmdBarFixture) =>
+      (page: Page, editor: EditorFixture) =>
       async ({
         hoverPos,
         constraintType,
@@ -160,7 +163,11 @@ test.describe('Testing segment overlays', () => {
           page.getByTestId('cmd-bar-arg-value').getByRole('textbox')
         ).toBeFocused()
         await page.waitForTimeout(500)
-        await cmdBar.continue()
+        await page
+          .getByRole('button', {
+            name: 'arrow right Continue',
+          })
+          .click()
         await editor.expectEditor.toContain(expectAfterUnconstrained, {
           shouldNormalise: true,
         })
@@ -232,8 +239,8 @@ test.describe('Testing segment overlays', () => {
 
       await expect(page.getByTestId('segment-overlay')).toHaveCount(14)
 
-      const clickUnconstrained = _clickUnconstrained(page, editor, cmdBar)
-      const clickConstrained = _clickConstrained(page, editor, cmdBar)
+      const clickUnconstrained = _clickUnconstrained(page, editor)
+      const clickConstrained = _clickConstrained(page, editor)
 
       await u.openAndClearDebugPanel()
       await u.sendCustomCmd({
@@ -657,7 +664,7 @@ profile002 = circle(sketch001, center = [345, 0], radius = 238.38)
       await expect(
         page.getByTestId('cmd-bar-arg-value').getByRole('textbox')
       ).toBeFocused()
-      await cmdBar.continue()
+      await page.getByRole('button', { name: 'arrow right Continue' }).click()
 
       // Verify the X constraint was added
       await editor.expectEditor.toContain('center = [xAbs001, 0]', {
@@ -675,7 +682,7 @@ profile002 = circle(sketch001, center = [345, 0], radius = 238.38)
       await expect(
         page.getByTestId('cmd-bar-arg-value').getByRole('textbox')
       ).toBeFocused()
-      await cmdBar.continue()
+      await page.getByRole('button', { name: 'arrow right Continue' }).click()
 
       // Verify the Y constraint was added
       await editor.expectEditor.toContain('center = [xAbs001, yAbs001]', {
@@ -693,7 +700,7 @@ profile002 = circle(sketch001, center = [345, 0], radius = 238.38)
       await expect(
         page.getByTestId('cmd-bar-arg-value').getByRole('textbox')
       ).toBeFocused()
-      await cmdBar.continue()
+      await page.getByRole('button', { name: 'arrow right Continue' }).click()
 
       // Verify all constraints were added
       await editor.expectEditor.toContain(
@@ -880,7 +887,7 @@ profile003 = startProfile(sketch001, at = [64.39, 35.16])
     await expect(
       page.getByTestId('cmd-bar-arg-value').getByRole('textbox')
     ).toBeFocused()
-    await cmdBar.continue()
+    await page.getByRole('button', { name: 'arrow right Continue' }).click()
 
     // Verify the constraint was added
     await editor.expectEditor.toContain(
@@ -903,7 +910,7 @@ profile003 = startProfile(sketch001, at = [64.39, 35.16])
     await expect(
       page.getByTestId('cmd-bar-arg-value').getByRole('textbox')
     ).toBeFocused()
-    await cmdBar.continue()
+    await page.getByRole('button', { name: 'arrow right Continue' }).click()
 
     // Verify both constraints were added
     await editor.expectEditor.toContain(
@@ -928,7 +935,7 @@ profile003 = startProfile(sketch001, at = [64.39, 35.16])
     await expect(
       page.getByTestId('cmd-bar-arg-value').getByRole('textbox')
     ).toBeFocused()
-    await cmdBar.continue()
+    await page.getByRole('button', { name: 'arrow right Continue' }).click()
 
     // Verify the constraint was added
     await editor.expectEditor.toContain('endAbsolute = [xAbs002, 84.07]', {
@@ -948,7 +955,7 @@ profile003 = startProfile(sketch001, at = [64.39, 35.16])
     await expect(
       page.getByTestId('cmd-bar-arg-value').getByRole('textbox')
     ).toBeFocused()
-    await cmdBar.continue()
+    await page.getByRole('button', { name: 'arrow right Continue' }).click()
 
     // Verify all constraints were added
     await editor.expectEditor.toContain(

e2e/playwright/various.spec.ts

@@ -32,7 +32,7 @@ test('Units menu', async ({ page, homePage }) => {
 test(
   'Successful export shows a success toast',
   { tag: '@skipLocalEngine' },
-  async ({ page, homePage, cmdBar, tronApp }) => {
+  async ({ page, homePage, tronApp }) => {
     // FYI this test doesn't work with only engine running locally
     // And you will need to have the KittyCAD CLI installed
     const u = await getUtils(page)
@@ -94,8 +94,7 @@ part001 = startSketchOn(-XZ)
         presentation: 'pretty',
       },
       tronApp?.projectDirName,
-      page,
-      cmdBar
+      page
     )
   }
 )
@@ -255,7 +254,6 @@ test('First escape in tool pops you out of tool, second exits sketch mode', asyn
 test('Basic default modeling and sketch hotkeys work', async ({
   page,
   homePage,
-  cmdBar,
 }) => {
   const u = await getUtils(page)
   await test.step(`Set up test`, async () => {
@@ -399,8 +397,11 @@ test('Basic default modeling and sketch hotkeys work', async ({
     await expect(page.getByRole('button', { name: 'Continue' })).toBeVisible({
       timeout: 20_000,
     })
-    await cmdBar.continue()
-    await cmdBar.submit()
+    await page.getByRole('button', { name: 'Continue' }).click()
+    await expect(
+      page.getByRole('button', { name: 'Submit command' })
+    ).toBeVisible()
+    await page.getByRole('button', { name: 'Submit command' }).click()
     await expect(page.locator('.cm-content')).toContainText('extrude(')
   })
 
@@ -574,7 +575,8 @@ profile001 = startProfile(sketch002, at = [-12.34, 12.34])
 
   await cmdBar.progressCmdBar()
   await cmdBar.progressCmdBar()
-  await cmdBar.submit()
+  await expect(page.getByText('Confirm Extrude')).toBeVisible()
+  await cmdBar.progressCmdBar()
 
   const result2 = result.genNext`
 const sketch002 = extrude(sketch002, length = ${[5, 5]} + 7)`

flake.lock

@@ -20,11 +20,11 @@
     },
     "nixpkgs": {
       "locked": {
-        "lastModified": 1750865895,
-        "narHash": "sha256-p2dWAQcLVzquy9LxYCZPwyUdugw78Qv3ChvnX755qHA=",
+        "lastModified": 1745998881,
+        "narHash": "sha256-vonyYAKJSlsX4n9GCsS0pHxR6yCrfqBIuGvANlkwG6U=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "61c0f513911459945e2cb8bf333dc849f1b976ff",
+        "rev": "423d2df5b04b4ee7688c3d71396e872afa236a89",
         "type": "github"
       },
       "original": {
@@ -36,11 +36,11 @@
     },
     "nixpkgs_2": {
       "locked": {
-        "lastModified": 1750865895,
-        "narHash": "sha256-p2dWAQcLVzquy9LxYCZPwyUdugw78Qv3ChvnX755qHA=",
+        "lastModified": 1745998881,
+        "narHash": "sha256-vonyYAKJSlsX4n9GCsS0pHxR6yCrfqBIuGvANlkwG6U=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "61c0f513911459945e2cb8bf333dc849f1b976ff",
+        "rev": "423d2df5b04b4ee7688c3d71396e872afa236a89",
         "type": "github"
       },
       "original": {
@@ -78,11 +78,11 @@
         "nixpkgs": "nixpkgs_3"
       },
       "locked": {
-        "lastModified": 1750964660,
-        "narHash": "sha256-YQ6EyFetjH1uy5JhdhRdPe6cuNXlYpMAQePFfZj4W7M=",
+        "lastModified": 1745980514,
+        "narHash": "sha256-CITAeiuXGjDvT5iZBXr6vKVWQwsUQLJUMFO91bfJFC4=",
         "owner": "oxalica",
         "repo": "rust-overlay",
-        "rev": "04f0fcfb1a50c63529805a798b4b5c21610ff390",
+        "rev": "7fbdae44b0f40ea432e46fd152ad8be0f8f41ad6",
         "type": "github"
       },
       "original": {

jest-component-unit-tests/billing.jesttest.tsx

@@ -125,7 +125,8 @@ test('Shows a loading spinner when uninitialized credit count', async () => {
   await expect(queryByTestId('spinner')).toBeVisible()
 })
 
-const unKnownTierData = {
+test('Shows the total credits for Unknown subscription', async () => {
+  const data = {
     balance: {
       monthlyApiCreditsRemaining: 10,
       stableApiCreditsRemaining: 25,
@@ -134,48 +135,8 @@ const unKnownTierData = {
       monthlyPayAsYouGoApiCreditsTotal: 20,
       name: "unknown",
     }
-}
-
-const freeTierData = {
-  balance: {
-    monthlyApiCreditsRemaining: 10,
-    stableApiCreditsRemaining: 0,
-  },
-  subscriptions: {
-    monthlyPayAsYouGoApiCreditsTotal: 20,
-    name: "free",
   }
-}
 
-const proTierData = {
-  // These are all ignored
-  balance: {
-    monthlyApiCreditsRemaining: 10,
-    stableApiCreditsRemaining: 0,
-  },
-  subscriptions: {
-    // This should be ignored because it's Pro tier.
-    monthlyPayAsYouGoApiCreditsTotal: 20,
-    name: "pro",
-  }
-}
-
-const enterpriseTierData = {
-  // These are all ignored, user is part of an org.
-  balance: {
-    monthlyApiCreditsRemaining: 10,
-    stableApiCreditsRemaining: 0,
-  },
-  subscriptions: {
-    // This should be ignored because it's Pro tier.
-    monthlyPayAsYouGoApiCreditsTotal: 20,
-    // This should be ignored because the user is part of an Org.
-    name: "free",
-  }
-}
-
-test('Shows the total credits for Unknown subscription', async () => {
-  const data = unKnownTierData
   server.use(
     http.get('*/user/payment/balance', (req, res, ctx) => {
       return HttpResponse.json(createUserPaymentBalanceResponse(data.balance))
@@ -205,7 +166,17 @@ test('Shows the total credits for Unknown subscription', async () => {
 })
 
 test('Progress bar reflects ratio left of Free subscription', async () => {
-  const data = freeTierData
+  const data = {
+    balance: {
+      monthlyApiCreditsRemaining: 10,
+      stableApiCreditsRemaining: 0,
+    },
+    subscriptions: {
+      monthlyPayAsYouGoApiCreditsTotal: 20,
+      name: "free",
+    }
+  }
+
   server.use(
     http.get('*/user/payment/balance', (req, res, ctx) => {
       return HttpResponse.json(createUserPaymentBalanceResponse(data.balance))
@@ -241,7 +212,19 @@ test('Progress bar reflects ratio left of Free subscription', async () => {
   })
 })
 test('Shows infinite credits for Pro subscription', async () => {
-  const data = proTierData
+  const data = {
+    // These are all ignored
+    balance: {
+      monthlyApiCreditsRemaining: 10,
+      stableApiCreditsRemaining: 0,
+    },
+    subscriptions: {
+      // This should be ignored because it's Pro tier.
+      monthlyPayAsYouGoApiCreditsTotal: 20,
+      name: "pro",
+    }
+  }
+
   server.use(
     http.get('*/user/payment/balance', (req, res, ctx) => {
       return HttpResponse.json(createUserPaymentBalanceResponse(data.balance))
@@ -272,7 +255,19 @@ test('Shows infinite credits for Pro subscription', async () => {
   await expect(queryByTestId('billing-remaining-progress-bar-inline')).toBe(null)
 })
 test('Shows infinite credits for Enterprise subscription', async () => {
-  const data = enterpriseTierData
+  const data = {
+    // These are all ignored, user is part of an org.
+    balance: {
+      monthlyApiCreditsRemaining: 10,
+      stableApiCreditsRemaining: 0,
+    },
+    subscriptions: {
+      // This should be ignored because it's Pro tier.
+      monthlyPayAsYouGoApiCreditsTotal: 20,
+      // This should be ignored because the user is part of an Org.
+      name: "free",
+    }
+  }
 
   server.use(
     http.get('*/user/payment/balance', (req, res, ctx) => {
@@ -302,58 +297,3 @@ test('Shows infinite credits for Enterprise subscription', async () => {
   await expect(queryByTestId('infinity')).toBeVisible()
   await expect(queryByTestId('billing-remaining-progress-bar-inline')).toBe(null)
 })
-
-test('Show upgrade button if credits are not infinite', async () => {
-  const data = freeTierData
-  server.use(
-    http.get('*/user/payment/balance', (req, res, ctx) => {
-      return HttpResponse.json(createUserPaymentBalanceResponse(data.balance))
-    }),
-    http.get('*/user/payment/subscriptions', (req, res, ctx) => {
-      return HttpResponse.json(createUserPaymentSubscriptionsResponse(data.subscriptions))
-    }),
-    http.get('*/org', (req, res, ctx) => {
-      return new HttpResponse(403)
-    }),
-  )
-
-  const billingActor = createActor(billingMachine, { input: BILLING_CONTEXT_DEFAULTS }).start()
-
-  const { queryByTestId } = render(<BillingDialog
-    billingActor={billingActor}
-  />)
-
-  await act(() => {
-    billingActor.send({ type: BillingTransition.Update, apiToken: "it doesn't matter wtf this is :)" })
-  })
-
-  await expect(queryByTestId('billing-upgrade-button')).toBeVisible()
-})
-
-test('Hide upgrade button if credits are infinite', async () => {
-  const data = enterpriseTierData
-  server.use(
-    http.get('*/user/payment/balance', (req, res, ctx) => {
-      return HttpResponse.json(createUserPaymentBalanceResponse(data.balance))
-    }),
-    http.get('*/user/payment/subscriptions', (req, res, ctx) => {
-      return HttpResponse.json(createUserPaymentSubscriptionsResponse(data.subscriptions))
-    }),
-    // Ok finally the first use of an org lol
-    http.get('*/org', (req, res, ctx) => {
-      return HttpResponse.json(createOrgResponse())
-    }),
-  )
-
-  const billingActor = createActor(billingMachine, { input: BILLING_CONTEXT_DEFAULTS }).start()
-
-  const { queryByTestId } = render(<BillingDialog
-    billingActor={billingActor}
-  />)
-
-  await act(() => {
-    billingActor.send({ type: BillingTransition.Update, apiToken: "it doesn't matter wtf this is :)" })
-  })
-
-  await expect(queryByTestId('billing-upgrade-button')).toBe(null)
-})

package.json

@@ -110,11 +110,8 @@
     "remove-importmeta": "sed -i 's/import.meta.url/window.location.origin/g' \"./rust/kcl-wasm-lib/pkg/kcl_wasm_lib.js\"; sed -i '' 's/import.meta.url/window.location.origin/g' \"./rust/kcl-wasm-lib/pkg/kcl_wasm_lib.js\" || echo \"sed for both mac and linux\"",
     "lint-fix": "eslint --fix --ext .ts --ext .tsx src e2e packages/codemirror-lsp-client/src rust/kcl-language-server/client/src",
     "lint": "eslint --max-warnings 0 --ext .ts --ext .tsx src e2e packages/codemirror-lsp-client/src rust/kcl-language-server/client/src",
-    "url-checker":"./scripts/url-checker.sh",
-    "url-checker:overwrite":"npm run url-checker > scripts/known/urls.txt",
-    "url-checker:diff":"./scripts/diff-url-checker.sh",
     "circular-deps": "dpdm --no-warning --no-tree -T --skip-dynamic-imports=circular src/index.tsx",
-    "circular-deps:overwrite": "npm run circular-deps | sed '$d' | grep -v '^npm run' > scripts/known/circular.txt",
+    "circular-deps:overwrite": "npm run circular-deps | sed '$d' | grep -v '^npm run' > known-circular.txt",
     "circular-deps:diff": "./scripts/diff-circular-deps.sh",
     "circular-deps:diff:nodejs": "npm run circular-deps:diff || node ./scripts/diff.js",
     "files:set-version": "echo \"$(jq --arg v \"$VERSION\" '.version=$v' package.json --indent 2)\" > package.json",

packages/codemirror-lang-kcl/src/kcl.grammar

@@ -111,8 +111,7 @@ commaSep1NoTrailingComma<term> { term ("," term)* }
 
   PipeSubstitution { "%" }
 
-  // Includes non-whitespace unicode characters.
-  identifier { $[a-zA-Z_\u{a1}-\u{167f}\u{1681}-\u{1fff}\u{200e}-\u{2027}\u{202a}-\u{202e}\u{2030}-\u{205e}\u{2061}-\u{2fff}\u{3001}-\u{fefe}\u{ff00}-\u{10ffff}] $[a-zA-Z0-9_\u{a1}-\u{167f}\u{1681}-\u{1fff}\u{200e}-\u{2027}\u{202a}-\u{202e}\u{2030}-\u{205e}\u{2061}-\u{2fff}\u{3001}-\u{fefe}\u{ff00}-\u{10ffff}]* }
+  identifier { (@asciiLetter | "_") (@asciiLetter | @digit | "_")* }
   AnnotationName { "@" identifier? }
   PropertyName { identifier }
   TagDeclarator { "$" identifier }

packages/codemirror-lsp-client/package.json

@@ -29,7 +29,7 @@
     "vscode-uri": "^3.1.0"
   },
   "devDependencies": {
-    "@types/node": "^24.0.7",
+    "@types/node": "^22.14.1",
     "ts-node": "^10.9.2"
   }
 }

public/kcl-samples/ball-bearing/main.kcl

@@ -27,7 +27,7 @@ insideWall = extrude(insideWallSketch, length = overallThickness)
 // Create the sketch of one of the balls
 ballsSketch = startSketchOn(XY)
   |> startProfile(at = [shaftDia / 2 + wallThickness, 0.001])
-  |> arc(angleStart = 180, angleEnd = 0, radius = sphereDia / 2)
+  |> arc(angleStart = 180deg, angleEnd = 0, radius = sphereDia / 2)
   |> close()
 
 // Revolve the ball to make a sphere and pattern around the inside wall
@@ -44,9 +44,9 @@ balls = revolve(ballsSketch, axis = X)
 chainSketch = startSketchOn(XY)
   |> startProfile(at = [
        shaftDia / 2 + wallThickness + sphereDia / 2 - (chainWidth / 2),
-       0.125 * sin(60)
+       0.125 * sin(60deg)
      ])
-  |> arc(angleStart = 120, angleEnd = 60, radius = sphereDia / 2)
+  |> arc(angleStart = 120deg, angleEnd = 60deg, radius = sphereDia / 2)
   |> line(end = [0, chainThickness])
   |> line(end = [-chainWidth, 0])
   |> close()
@@ -54,7 +54,7 @@ chainSketch = startSketchOn(XY)
 // Revolve the chain sketch
 chainHead = revolve(chainSketch, axis = X)
   |> patternCircular3d(
-       arcDegrees = 360,
+       arcDegrees = 360deg,
        axis = [0, 0, 1],
        center = [0, 0, 0],
        instances = nBalls,
@@ -72,9 +72,9 @@ linkSketch = startSketchOn(XZ)
      )
 
 // Revolve the link sketch
-linkRevolve = revolve(linkSketch, axis = Y, angle = 360 / nBalls)
+linkRevolve = revolve(linkSketch, axis = Y, angle = 360deg / nBalls)
   |> patternCircular3d(
-       arcDegrees = 360,
+       arcDegrees = 360deg,
        axis = [0, 0, 1],
        center = [0, 0, 0],
        instances = nBalls,

public/kcl-samples/brake-rotor/main.kcl

@@ -23,12 +23,12 @@ nVentBosses = 36
 
 // Drilling parameters.
 dDrillDia = 6
-aBase = 90
-aSweep = 30
+aBase = 90deg
+aSweep = 30deg
 nArcs = 12
 
 // Bell parameters.
-aDraftBell = 5
+aDraftBell = 5deg
 tBell = 5 // Wall thickness.
 hBellAboveDiscFace = 40
 hBellSubflush = 4
@@ -98,7 +98,7 @@ planeVent = offsetPlane(XY, offset = tDiscHalf)
 sketchVent = startSketchOn(planeVent)
 profileVent = startProfile(sketchVent, at = [-wVent, dDisc / 2])
   |> angledLine(angle = 0, length = wVent, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = hFrictionSurface, tag = $seg02)
+  |> angledLine(angle = segAng(rectangleSegmentA001) - 90deg, length = hFrictionSurface, tag = $seg02)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $seg03)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg01)
   |> close()
@@ -118,7 +118,7 @@ ventSet = patternCircular3d(
   instances = nVentBosses,
   axis = [0, 0, 1],
   center = [0, 0, tDiscHalf],
-  arcDegrees = 360,
+  arcDegrees = 360deg,
   rotateDuplicates = true,
 )
 
@@ -134,8 +134,8 @@ discOutboard = createDiscHalf(
 // Now create bell.
 rCenter = dDisc / 2 - hFrictionSurface - wUndercut
 rBore = dBore / 2
-lDraftExterior = hBellAboveDiscFace / tan(90 - aDraftBell)
-lDraftInterior = (hBellAboveDiscFace - tBell) / tan(90 - aDraftBell)
+lDraftExterior = hBellAboveDiscFace / tan(90deg - aDraftBell)
+lDraftInterior = (hBellAboveDiscFace - tBell) / tan(90deg - aDraftBell)
 
 // Inner and outer radius of outboard face of disc bell.
 rOuter = rCenter - lDraftExterior - rBore
@@ -151,7 +151,7 @@ bodyDiscBell = startProfile(
      )
   |> arc(
        %,
-       angleStart = -180,
+       angleStart = -180deg,
        angleEnd = 0,
        radius = wUndercut / 2,
      )
@@ -172,7 +172,7 @@ profileStud = circle(sketchLugs, center = [0, dPitchCircle / 2], radius = dStudD
        %,
        instances = nStuds,
        center = [0, 0],
-       arcDegrees = 360,
+       arcDegrees = 360deg,
        rotateDuplicates = true,
      )
 

public/kcl-samples/clock/main.kcl

@@ -28,8 +28,8 @@ hour = 9
 minute = 29
 
 // Calculate hand angles
-hourHandAngle = 90 - (hour * 30)
-minuteHandAngle = 90 - (minute * 6)
+hourHandAngle = 90deg - (hour * 30deg)
+minuteHandAngle = 90deg - (minute * 6deg)
 
 // Create the clock body
 clockBodySketch = startSketchOn(XY)
@@ -72,18 +72,18 @@ numberObject = {
   // one = { i = [90, 160] },
   one = {
     i = [
-      clockDiameter / 2 * 3 / 4 * cos(60),
-      clockDiameter / 2 * 3 / 4 * sin(60)
+      clockDiameter / 2 * 3 / 4 * cos(60deg),
+      clockDiameter / 2 * 3 / 4 * sin(60deg)
     ]
   },
   two = {
     i = [
-      clockDiameter / 2 * 3 / 4 * cos(30) - 10,
-      clockDiameter / 2 * 3 / 4 * sin(30)
+      clockDiameter / 2 * 3 / 4 * cos(30deg) - 10,
+      clockDiameter / 2 * 3 / 4 * sin(30deg)
     ],
     i2 = [
-      clockDiameter / 2 * 3 / 4 * cos(30) + 5,
-      clockDiameter / 2 * 3 / 4 * sin(30)
+      clockDiameter / 2 * 3 / 4 * cos(30deg) + 5,
+      clockDiameter / 2 * 3 / 4 * sin(30deg)
     ]
   },
   three = {
@@ -102,100 +102,100 @@ numberObject = {
   },
   four = {
     i = [
-      clockDiameter / 2 * 3 / 4 * cos(-30) - 10,
-      clockDiameter / 2 * 3 / 4 * sin(-30)
+      clockDiameter / 2 * 3 / 4 * cos(-30deg) - 10,
+      clockDiameter / 2 * 3 / 4 * sin(-30deg)
     ],
     v = [
-      clockDiameter / 2 * 3 / 4 * cos(-30) + 13,
-      clockDiameter / 2 * 3 / 4 * sin(-30)
+      clockDiameter / 2 * 3 / 4 * cos(-30deg) + 13,
+      clockDiameter / 2 * 3 / 4 * sin(-30deg)
     ]
   },
   five = {
     v = [
-      clockDiameter / 2 * 3 / 4 * cos(-60),
-      clockDiameter / 2 * 3 / 4 * sin(-60)
+      clockDiameter / 2 * 3 / 4 * cos(-60deg),
+      clockDiameter / 2 * 3 / 4 * sin(-60deg)
     ]
   },
   six = {
     v = [
-      clockDiameter / 2 * 3 / 4 * cos(-90) - 10,
-      clockDiameter / 2 * 3 / 4 * sin(-90)
+      clockDiameter / 2 * 3 / 4 * cos(-90deg) - 10,
+      clockDiameter / 2 * 3 / 4 * sin(-90deg)
     ],
     i = [
-      clockDiameter / 2 * 3 / 4 * cos(-90) + 12,
-      clockDiameter / 2 * 3 / 4 * sin(-90)
+      clockDiameter / 2 * 3 / 4 * cos(-90deg) + 12,
+      clockDiameter / 2 * 3 / 4 * sin(-90deg)
     ]
   },
   seven = {
     v = [
-      clockDiameter / 2 * 3 / 4 * cos(-120) - 15,
-      clockDiameter / 2 * 3 / 4 * sin(-120)
+      clockDiameter / 2 * 3 / 4 * cos(-120deg) - 15,
+      clockDiameter / 2 * 3 / 4 * sin(-120deg)
     ],
     i = [
-      clockDiameter / 2 * 3 / 4 * cos(-120) + 5,
-      clockDiameter / 2 * 3 / 4 * sin(-120)
+      clockDiameter / 2 * 3 / 4 * cos(-120deg) + 5,
+      clockDiameter / 2 * 3 / 4 * sin(-120deg)
     ],
     i2 = [
-      clockDiameter / 2 * 3 / 4 * cos(-120) + 20,
-      clockDiameter / 2 * 3 / 4 * sin(-120)
+      clockDiameter / 2 * 3 / 4 * cos(-120deg) + 20,
+      clockDiameter / 2 * 3 / 4 * sin(-120deg)
     ]
   },
   eight = {
     v = [
-      clockDiameter / 2 * 3 / 4 * cos(-150) - 10,
-      clockDiameter / 2 * 3 / 4 * sin(-150)
+      clockDiameter / 2 * 3 / 4 * cos(-150deg) - 10,
+      clockDiameter / 2 * 3 / 4 * sin(-150deg)
     ],
     i = [
-      clockDiameter / 2 * 3 / 4 * cos(-150) + 10,
-      clockDiameter / 2 * 3 / 4 * sin(-150)
+      clockDiameter / 2 * 3 / 4 * cos(-150deg) + 10,
+      clockDiameter / 2 * 3 / 4 * sin(-150deg)
     ],
     i2 = [
-      clockDiameter / 2 * 3 / 4 * cos(-150) + 25,
-      clockDiameter / 2 * 3 / 4 * sin(-150)
+      clockDiameter / 2 * 3 / 4 * cos(-150deg) + 25,
+      clockDiameter / 2 * 3 / 4 * sin(-150deg)
     ],
     i3 = [
-      clockDiameter / 2 * 3 / 4 * cos(-150) + 40,
-      clockDiameter / 2 * 3 / 4 * sin(-150)
+      clockDiameter / 2 * 3 / 4 * cos(-150deg) + 40,
+      clockDiameter / 2 * 3 / 4 * sin(-150deg)
     ]
   },
   nine = {
     i = [
-      clockDiameter / 2 * 3 / 4 * cos(180) - 15,
-      clockDiameter / 2 * 3 / 4 * sin(180)
+      clockDiameter / 2 * 3 / 4 * cos(180deg) - 15,
+      clockDiameter / 2 * 3 / 4 * sin(180deg)
     ],
     x = [
-      clockDiameter / 2 * 3 / 4 * cos(180) + 15,
-      clockDiameter / 2 * 3 / 4 * sin(180)
+      clockDiameter / 2 * 3 / 4 * cos(180deg) + 15,
+      clockDiameter / 2 * 3 / 4 * sin(180deg)
     ]
   },
   ten = {
     x = [
-      clockDiameter / 2 * 3 / 4 * cos(150) + 5,
-      clockDiameter / 2 * 3 / 4 * sin(150)
+      clockDiameter / 2 * 3 / 4 * cos(150deg) + 5,
+      clockDiameter / 2 * 3 / 4 * sin(150deg)
     ]
   },
   eleven = {
     x = [
-      clockDiameter / 2 * 3 / 4 * cos(120),
-      clockDiameter / 2 * 3 / 4 * sin(120)
+      clockDiameter / 2 * 3 / 4 * cos(120deg),
+      clockDiameter / 2 * 3 / 4 * sin(120deg)
     ],
     i = [
-      clockDiameter / 2 * 3 / 4 * cos(120) + 10,
-      clockDiameter / 2 * 3 / 4 * sin(120)
+      clockDiameter / 2 * 3 / 4 * cos(120deg) + 10,
+      clockDiameter / 2 * 3 / 4 * sin(120deg)
     ]
   },
   twelve = {
     x = [
-      clockDiameter / 2 * 3 / 4 * cos(90) - 10,
-      clockDiameter / 2 * 3 / 4 * sin(90)
+      clockDiameter / 2 * 3 / 4 * cos(90deg) - 10,
+      clockDiameter / 2 * 3 / 4 * sin(90deg)
     ],
     i = [
-      clockDiameter / 2 * 3 / 4 * cos(90) + 5,
-      clockDiameter / 2 * 3 / 4 * sin(90)
+      clockDiameter / 2 * 3 / 4 * cos(90deg) + 5,
+      clockDiameter / 2 * 3 / 4 * sin(90deg)
     ],
     i2 = [
-      clockDiameter / 2 * 3 / 4 * cos(90) + 20,
-      clockDiameter / 2 * 3 / 4 * sin(90)
+      clockDiameter / 2 * 3 / 4 * cos(90deg) + 20,
+      clockDiameter / 2 * 3 / 4 * sin(90deg)
     ]
   }
 }
@@ -234,16 +234,16 @@ fn letterX(startX, startY) {
          ],
        )
     |> xLine(%, length = xWidth / 6)
-    |> angledLine(%, angle = -70, lengthY = xLength * 1 / 3)
-    |> angledLine(%, angle = 70, lengthY = xLength * 1 / 3)
+    |> angledLine(%, angle = -70deg, lengthY = xLength * 1 / 3)
+    |> angledLine(%, angle = 70deg, lengthY = xLength * 1 / 3)
     |> xLine(%, length = xWidth / 6)
-    |> angledLine(%, angle = 70 + 180, lengthY = xLength * 1 / 2)
-    |> angledLine(%, angle = -70, lengthY = xLength * 1 / 2)
+    |> angledLine(%, angle = 70deg + 180deg, lengthY = xLength * 1 / 2)
+    |> angledLine(%, angle = -70deg, lengthY = xLength * 1 / 2)
     |> xLine(%, length = -xWidth / 6)
-    |> angledLine(%, angle = -70 - 180, lengthY = xLength * 1 / 3)
-    |> angledLine(%, angle = 70 + 180, lengthY = xLength * 1 / 3)
+    |> angledLine(%, angle = -70deg - 180deg, lengthY = xLength * 1 / 3)
+    |> angledLine(%, angle = 70deg + 180deg, lengthY = xLength * 1 / 3)
     |> xLine(%, length = -xWidth / 6)
-    |> angledLine(%, angle = 70, lengthY = xLength * 1 / 2)
+    |> angledLine(%, angle = 70deg, lengthY = xLength * 1 / 2)
     |> close(%)
     |> extrude(%, length = numberThickness)
     |> appearance(%, color = "#140f0f")
@@ -333,25 +333,25 @@ sketch005 = startSketchOn(offsetPlane(XY, offset = 55))
 profile007 = startProfile(
        sketch005,
        at = [
-         nubDiameter / 2 * 1.375 * cos(hourHandAngle + 20),
-         nubDiameter / 2 * 1.375 * sin(hourHandAngle + 20)
+         nubDiameter / 2 * 1.375 * cos(hourHandAngle + 20deg),
+         nubDiameter / 2 * 1.375 * sin(hourHandAngle + 20deg)
        ],
      )
   |> arc(
        %,
        interiorAbsolute = [
-         nubDiameter / 2 * 1.375 * cos(hourHandAngle + 180),
-         nubDiameter / 2 * 1.375 * sin(hourHandAngle + 180)
+         nubDiameter / 2 * 1.375 * cos(hourHandAngle + 180deg),
+         nubDiameter / 2 * 1.375 * sin(hourHandAngle + 180deg)
        ],
        endAbsolute = [
-         nubDiameter / 2 * 1.375 * cos(hourHandAngle + 340),
-         nubDiameter / 2 * 1.375 * sin(hourHandAngle + 340)
+         nubDiameter / 2 * 1.375 * cos(hourHandAngle + 340deg),
+         nubDiameter / 2 * 1.375 * sin(hourHandAngle + 340deg)
        ],
      )
   |> angledLine(%, angle = hourHandAngle, length = hourHandArmLength)
   |> angledLine(
        %,
-       angle = hourHandAngle - 90,
+       angle = hourHandAngle - 90deg,
        length = hourHandWidth / 2,
        tag = $seg004,
      )
@@ -363,9 +363,9 @@ profile007 = startProfile(
        ],
        tag = $seg002,
      )
-  |> angledLine(%, angle = segAng(seg002) + 120, length = segLen(seg002))
-  // |> angledLineThatIntersects(%, angle = segAng(seg002) + hourHandAngle - 90, intersectTag = seg004)
-  |> angledLine(%, angle = hourHandAngle - 90, length = segLen(seg004))
+  |> angledLine(%, angle = segAng(seg002) + 120deg, length = segLen(seg002))
+  // |> angledLineThatIntersects(%, angle = segAng(seg002) + hourHandAngle - 90deg, intersectTag = seg004)
+  |> angledLine(%, angle = hourHandAngle - 90deg, length = segLen(seg004))
   |> line(%, endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close(%)
 profile008 = circle(sketch005, center = [0, 0], diameter = nubDiameter)
@@ -378,25 +378,25 @@ sketch006 = startSketchOn(offsetPlane(XY, offset = 50))
 profile009 = startProfile(
        sketch006,
        at = [
-         nubDiameter / 2 * 1.375 * cos(minuteHandAngle + 20),
-         nubDiameter / 2 * 1.375 * sin(minuteHandAngle + 20)
+         nubDiameter / 2 * 1.375 * cos(minuteHandAngle + 20deg),
+         nubDiameter / 2 * 1.375 * sin(minuteHandAngle + 20deg)
        ],
      )
   |> arc(
        %,
        interiorAbsolute = [
-         nubDiameter / 2 * 1.375 * cos(minuteHandAngle + 180),
-         nubDiameter / 2 * 1.375 * sin(minuteHandAngle + 180)
+         nubDiameter / 2 * 1.375 * cos(minuteHandAngle + 180deg),
+         nubDiameter / 2 * 1.375 * sin(minuteHandAngle + 180deg)
        ],
        endAbsolute = [
-         nubDiameter / 2 * 1.375 * cos(minuteHandAngle + 340),
-         nubDiameter / 2 * 1.375 * sin(minuteHandAngle + 340)
+         nubDiameter / 2 * 1.375 * cos(minuteHandAngle + 340deg),
+         nubDiameter / 2 * 1.375 * sin(minuteHandAngle + 340deg)
        ],
      )
   |> angledLine(%, angle = minuteHandAngle, length = minuteHandArmLength)
   |> angledLine(
        %,
-       angle = minuteHandAngle - 90,
+       angle = minuteHandAngle - 90deg,
        length = minuteHandWidth / 2,
        tag = $seg003,
      )
@@ -408,8 +408,8 @@ profile009 = startProfile(
        ],
        tag = $seg005,
      )
-  |> angledLine(%, angle = segAng(seg005) + 120, length = segLen(seg005))
-  |> angledLine(%, angle = minuteHandAngle - 90, length = segLen(seg003))
+  |> angledLine(%, angle = segAng(seg005) + 120deg, length = segLen(seg005))
+  |> angledLine(%, angle = minuteHandAngle - 90deg, length = segLen(seg003))
   |> line(%, endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close(%)
 profile010 = circle(sketch006, center = [0, 0], diameter = 30)
@@ -430,8 +430,8 @@ profile004 = startProfile(sketch003, at = [-slotWidth / 2, 200])
   |> arc(
        %,
        radius = screwHeadDiameter / 2 + screwTolerance,
-       angleStart = 120,
-       angleEnd = 420,
+       angleStart = 120deg,
+       angleEnd = 420deg,
      )
   |> yLine(%, length = slotLength)
   |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])

public/kcl-samples/cold-plate/main.kcl

@@ -14,15 +14,15 @@ coldPlate = startSketchOn(YZ)
   |> startProfile(at = [0, tubeDiameter * 2])
   |> xLine(length = bendRadius - (tubeDiameter / 2))
   |> yLine(length = -tubeDiameter)
-  |> tangentialArc(angle = 180, radius = tubeDiameter / 2)
+  |> tangentialArc(angle = 180deg, radius = tubeDiameter / 2)
   |> yLine(length = tubeDiameter)
   |> xLine(length = bendRadius * 2 - tubeDiameter, tag = $seg07)
   |> yLine(length = -tubeDiameter, tag = $seg09)
-  |> tangentialArc(angle = 180, radius = tubeDiameter / 2)
+  |> tangentialArc(angle = 180deg, radius = tubeDiameter / 2)
   |> yLine(length = tubeDiameter, tag = $seg08)
   |> xLine(length = bendRadius - (tubeDiameter / 2))
-  |> angledLine(angle = -77, length = tubeDiameter / 3)
-  |> tangentialArc(angle = 77, radius = tubeDiameter, tag = $seg01)
+  |> angledLine(angle = -77deg, length = tubeDiameter / 3)
+  |> tangentialArc(angle = 77deg, radius = tubeDiameter, tag = $seg01)
   |> angledLine(angle = tangentToEnd(seg01), length = 1)
   |> yLine(endAbsolute = 0)
   |> xLine(endAbsolute = 0)
@@ -34,11 +34,11 @@ coldPlate = startSketchOn(YZ)
 copperTubePath = startSketchOn(offsetPlane(XY, offset = tubeDiameter))
   |> startProfile(at = [-7.35, -bendRadius * 3])
   |> xLine(length = 14.13, tag = $seg05)
-  |> tangentialArc(angle = 180, radius = bendRadius, tag = $seg02)
+  |> tangentialArc(angle = 180deg, radius = bendRadius, tag = $seg02)
   |> angledLine(angle = tangentToEnd(seg02), length = 13.02, tag = $seg06)
-  |> tangentialArc(angle = -180, radius = bendRadius, tag = $seg03)
+  |> tangentialArc(angle = -180deg, radius = bendRadius, tag = $seg03)
   |> angledLine(angle = tangentToEnd(seg03), length = segLen(seg06))
-  |> tangentialArc(angle = 180, radius = bendRadius, tag = $seg04)
+  |> tangentialArc(angle = 180deg, radius = bendRadius, tag = $seg04)
   |> angledLine(angle = tangentToEnd(seg04), length = segLen(seg05))
 
 // Create the profile for the inner and outer diameter of the hollow copper tube

public/kcl-samples/countersunk-plate/main.kcl

@@ -22,13 +22,13 @@ tangentLength = (r1 - r2) / tan(tangentAngle)
 
 plateBody = startSketchOn(XY)
   // Use polar coordinates to start the sketch at the tangent point of the larger radius
-  |> startProfile(at = polar(angle = 90 - tangentAngle, length = r1))
+  |> startProfile(at = polar(angle = 90deg - tangentAngle, length = r1))
   |> angledLine(angle = -tangentAngle, length = tangentLength)
-  |> tangentialArc(radius = r2, angle = (tangentAngle - 90) * 2)
+  |> tangentialArc(radius = r2, angle = (tangentAngle - 90deg) * 2)
   |> angledLine(angle = tangentAngle, length = -tangentLength)
   |> tangentialArc(radius = r1, angle = -tangentAngle * 2)
   |> angledLine(angle = -tangentAngle, length = -tangentLength)
-  |> tangentialArc(radius = r2, angle = (tangentAngle - 90) * 2)
+  |> tangentialArc(radius = r2, angle = (tangentAngle - 90deg) * 2)
   |> angledLine(angle = tangentAngle, length = tangentLength)
   |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()

public/kcl-samples/cpu-cooler/fan-housing.kcl

@@ -12,7 +12,7 @@ import * from "parameters.kcl"
 bottomFaceSketch = startSketchOn(YZ)
   |> startProfile(at = [-fanSize / 2, -fanSize / 2])
   |> angledLine(angle = 0, length = fanSize, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) + 90, length = fanSize, tag = $rectangleSegmentB001)
+  |> angledLine(angle = segAng(rectangleSegmentA001) + 90deg, length = fanSize, tag = $rectangleSegmentB001)
   |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $rectangleSegmentD001)
   |> close()
@@ -50,12 +50,12 @@ bottomFaceSketch = startSketchOn(YZ)
 // Add large openings to the bottom face to allow airflow through the fan
 airflowPattern = startSketchOn(bottomFaceSketch, face = END)
   |> startProfile(at = [fanSize * 7 / 25, -fanSize * 9 / 25])
-  |> angledLine(angle = 140, length = fanSize * 12 / 25, tag = $seg01)
-  |> tangentialArc(radius = fanSize * 1 / 50, angle = 90)
-  |> angledLine(angle = -130, length = fanSize * 8 / 25)
-  |> tangentialArc(radius = fanSize * 1 / 50, angle = 90)
-  |> angledLine(angle = segAng(seg01) + 180, length = fanSize * 2 / 25)
-  |> tangentialArc(radius = fanSize * 8 / 25, angle = 40)
+  |> angledLine(angle = 140deg, length = fanSize * 12 / 25, tag = $seg01)
+  |> tangentialArc(radius = fanSize * 1 / 50, angle = 90deg)
+  |> angledLine(angle = -130deg, length = fanSize * 8 / 25)
+  |> tangentialArc(radius = fanSize * 1 / 50, angle = 90deg)
+  |> angledLine(angle = segAng(seg01) + 180deg, length = fanSize * 2 / 25)
+  |> tangentialArc(radius = fanSize * 8 / 25, angle = 40deg)
   |> xLine(length = fanSize * 3 / 25)
   |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
@@ -75,13 +75,13 @@ bodyMiddle = startSketchOn(bottomFaceSketch, face = END)
        housingMiddleLength / 2,
        -housingMiddleLength / 2 - housingMiddleRadius
      ])
-  |> tangentialArc(radius = housingMiddleRadius, angle = 90)
+  |> tangentialArc(radius = housingMiddleRadius, angle = 90deg)
   |> yLine(length = housingMiddleLength)
-  |> tangentialArc(radius = housingMiddleRadius, angle = 90)
+  |> tangentialArc(radius = housingMiddleRadius, angle = 90deg)
   |> xLine(length = -housingMiddleLength)
-  |> tangentialArc(radius = housingMiddleRadius, angle = 90)
+  |> tangentialArc(radius = housingMiddleRadius, angle = 90deg)
   |> yLine(length = -housingMiddleLength)
-  |> tangentialArc(radius = housingMiddleRadius, angle = 90)
+  |> tangentialArc(radius = housingMiddleRadius, angle = 90deg)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> extrude(length = fanHeight - 4 - 4)
 

public/kcl-samples/cpu-cooler/fan.kcl

@@ -20,32 +20,32 @@ fn fanBlade(offsetHeight, startAngle) {
          15 * cos(startAngle),
          15 * sin(startAngle)
        ])
-    |> arc(angleStart = startAngle, angleEnd = startAngle + 14, radius = 15)
+    |> arc(angleStart = startAngle, angleEnd = startAngle + 14deg, radius = 15)
     |> arc(
          endAbsolute = [
-           fanSize * 22 / 50 * cos(startAngle - 20),
-           fanSize * 22 / 50 * sin(startAngle - 20)
+           fanSize * 22 / 50 * cos(startAngle - 20deg),
+           fanSize * 22 / 50 * sin(startAngle - 20deg)
          ],
          interiorAbsolute = [
-           fanSize * 11 / 50 * cos(startAngle + 3),
-           fanSize * 11 / 50 * sin(startAngle + 3)
+           fanSize * 11 / 50 * cos(startAngle + 3deg),
+           fanSize * 11 / 50 * sin(startAngle + 3deg)
          ],
        )
     |> arc(
          endAbsolute = [
-           fanSize * 22 / 50 * cos(startAngle - 24),
-           fanSize * 22 / 50 * sin(startAngle - 24)
+           fanSize * 22 / 50 * cos(startAngle - 24deg),
+           fanSize * 22 / 50 * sin(startAngle - 24deg)
          ],
          interiorAbsolute = [
-           fanSize * 22 / 50 * cos(startAngle - 22),
-           fanSize * 22 / 50 * sin(startAngle - 22)
+           fanSize * 22 / 50 * cos(startAngle - 22deg),
+           fanSize * 22 / 50 * sin(startAngle - 22deg)
          ],
        )
     |> arc(
          endAbsolute = [profileStartX(%), profileStartY(%)],
          interiorAbsolute = [
-           fanSize * 11 / 50 * cos(startAngle - 5),
-           fanSize * 11 / 50 * sin(startAngle - 5)
+           fanSize * 11 / 50 * cos(startAngle - 5deg),
+           fanSize * 11 / 50 * sin(startAngle - 5deg)
          ],
        )
     |> close()
@@ -54,8 +54,8 @@ fn fanBlade(offsetHeight, startAngle) {
 
 // Loft the fan blade cross sections into a single blade, then pattern them about the fan center
 crossSections = [
-  fanBlade(offsetHeight = 4.5, startAngle = 50),
-  fanBlade(offsetHeight = (fanHeight - 2 - 4) / 2, startAngle = 30),
+  fanBlade(offsetHeight = 4.5, startAngle = 50deg),
+  fanBlade(offsetHeight = (fanHeight - 2 - 4) / 2, startAngle = 30deg),
   fanBlade(offsetHeight = fanHeight - 2, startAngle = 0)
 ]
 bladeLoft = loft(crossSections)
@@ -63,7 +63,7 @@ bladeLoft = loft(crossSections)
        instances = 9,
        axis = [1, 0, 0],
        center = [0, 0, 0],
-       arcDegrees = 360,
+       arcDegrees = 360deg,
        rotateDuplicates = true,
      )
 

public/kcl-samples/cpu-cooler/heat-sink.kcl

@@ -11,10 +11,10 @@ import * from "parameters.kcl"
 endTubePath = startSketchOn(offsetPlane(YZ, offset = -20))
   |> startProfile(at = [fanSize / 4, fanSize + 38])
   |> yLine(endAbsolute = bendRadius + 10, tag = $seg01)
-  |> tangentialArc(radius = bendRadius, angle = -90)
+  |> tangentialArc(radius = bendRadius, angle = -90deg)
   |> xLine(endAbsolute = 0, tag = $seg02)
   |> xLine(length = -segLen(seg02))
-  |> tangentialArc(radius = bendRadius, angle = -90)
+  |> tangentialArc(radius = bendRadius, angle = -90deg)
   |> yLine(length = segLen(seg01))
 
 // Sweep and translate the outermost tube on each end
@@ -35,13 +35,13 @@ endTube = startSketchOn(offsetPlane(XY, offset = fanSize + 38))
 centerTubePath = startSketchOn(offsetPlane(YZ, offset = -4))
   |> startProfile(at = [fanSize / 2.67, fanSize + 38])
   |> yLine(endAbsolute = bendRadius + 15 + 10)
-  |> tangentialArc(radius = bendRadius, angle = -45)
-  |> angledLine(angle = -135, lengthY = 15)
-  |> tangentialArc(radius = bendRadius, angle = -45)
+  |> tangentialArc(radius = bendRadius, angle = -45deg)
+  |> angledLine(angle = -135deg, lengthY = 15)
+  |> tangentialArc(radius = bendRadius, angle = -45deg)
   |> xLine(endAbsolute = 0, tag = $seg03)
   |> xLine(length = -segLen(seg03))
-  |> tangentialArc(radius = bendRadius, angle = -155)
-  |> tangentialArc(radius = bendRadius, angle = 65)
+  |> tangentialArc(radius = bendRadius, angle = -155deg)
+  |> tangentialArc(radius = bendRadius, angle = 65deg)
   |> yLine(endAbsolute = fanSize + 38)
 
 // Draw the profile and sweep the 4 interior tubes
@@ -68,13 +68,13 @@ centerTube = startSketchOn(offsetPlane(XY, offset = fanSize + 38))
 heatFins = startSketchOn(offsetPlane(XY, offset = 45))
   |> startProfile(at = [0, -fanSize / 2])
   |> xLine(length = 9)
-  |> angledLine(angle = -60, length = 2.5, tag = $seg04)
+  |> angledLine(angle = -60deg, length = 2.5, tag = $seg04)
   |> xLine(length = 0.75)
   |> arc(interiorAbsolute = [lastSegX(%) + 1, lastSegY(%) + 1.2], endAbsolute = [lastSegX(%) + 2, lastSegY(%)])
   |> xLine(length = 0.75)
-  |> angledLine(angle = 60, length = segLen(seg04))
+  |> angledLine(angle = 60deg, length = segLen(seg04))
   |> xLine(endAbsolute = heatSinkDepth / 2 - 3)
-  |> tangentialArc(angle = 90, radius = 3)
+  |> tangentialArc(angle = 90deg, radius = 3)
   |> yLine(endAbsolute = 0)
   |> mirror2d(axis = X)
   |> mirror2d(axis = Y)
@@ -91,11 +91,11 @@ heatFins = startSketchOn(offsetPlane(XY, offset = 45))
 coolerBase = startSketchOn(-XZ)
 baseLower = startProfile(coolerBase, at = [0, 10])
   |> xLine(length = -0.9)
-  |> arc(angleStart = 0, angleEnd = -180, radius = 3.1)
+  |> arc(angleStart = 0, angleEnd = -180deg, radius = 3.1)
   |> xLine(length = -1.8)
-  |> arc(angleStart = 0, angleEnd = -180, radius = 3)
+  |> arc(angleStart = 0, angleEnd = -180deg, radius = 3)
   |> xLine(length = -1.8)
-  |> arc(angleStart = 0, angleEnd = -180, radius = 3)
+  |> arc(angleStart = 0, angleEnd = -180deg, radius = 3)
   |> xLine(length = -1.8)
   |> xLine(length = -2)
   |> yLine(length = -10)
@@ -105,15 +105,15 @@ baseLower = startProfile(coolerBase, at = [0, 10])
 
 baseUpper = startProfile(coolerBase, at = [0, 10])
   |> xLine(length = -0.9)
-  |> arc(angleStart = 0, angleEnd = 180, radius = 3.1)
+  |> arc(angleStart = 0, angleEnd = 180deg, radius = 3.1)
   |> xLine(length = -1.8)
-  |> arc(angleStart = 0, angleEnd = 180, radius = 3)
+  |> arc(angleStart = 0, angleEnd = 180deg, radius = 3)
   |> xLine(length = -1.8)
-  |> arc(angleStart = 0, angleEnd = 180, radius = 3)
+  |> arc(angleStart = 0, angleEnd = 180deg, radius = 3)
   |> xLine(length = -1.8)
   |> xLine(length = -1)
   |> yLine(length = 4)
-  |> tangentialArc(angle = -90, radius = 2)
+  |> tangentialArc(angle = -90deg, radius = 2)
   |> xLine(endAbsolute = 0)
   |> mirror2d(axis = Y)
   |> extrude(length = 2 * segLen(seg02) * 3 / 4, symmetric = true)
@@ -122,15 +122,15 @@ baseUpper = startProfile(coolerBase, at = [0, 10])
 mountingBracket = startSketchOn(XZ)
   |> startProfile(at = [-10, 16])
   |> xLine(length = -20)
-  |> tangentialArc(angle = 20, radius = bendRadius)
-  |> angledLine(angle = -160, length = 14, tag = $seg09)
-  |> tangentialArc(angle = -30, radius = bendRadius + sheetThickness)
-  |> angledLine(angle = 170, length = 21.5, tag = $seg04Q)
-  |> angledLine(angle = 170 - 90, length = sheetThickness, tag = $seg08)
-  |> angledLine(angle = segAng(seg04Q) + 180, length = segLen(seg04Q), tag = $seg05E)
-  |> tangentialArc(angle = 30, radius = bendRadius)
-  |> angledLine(angle = segAng(seg09) + 180, length = segLen(seg09))
-  |> tangentialArc(angle = -20, radius = bendRadius + sheetThickness)
+  |> tangentialArc(angle = 20deg, radius = bendRadius)
+  |> angledLine(angle = -160deg, length = 14, tag = $seg09)
+  |> tangentialArc(angle = -30deg, radius = bendRadius + sheetThickness)
+  |> angledLine(angle = 170deg, length = 21.5, tag = $seg04Q)
+  |> angledLine(angle = 170deg - 90, length = sheetThickness, tag = $seg08)
+  |> angledLine(angle = segAng(seg04Q) + 180deg, length = segLen(seg04Q), tag = $seg05E)
+  |> tangentialArc(angle = 30deg, radius = bendRadius)
+  |> angledLine(angle = segAng(seg09) + 180deg, length = segLen(seg09))
+  |> tangentialArc(angle = -20deg, radius = bendRadius + sheetThickness)
   |> xLine(endAbsolute = profileStartX(%))
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg07)
   |> close()
@@ -166,6 +166,6 @@ thruHole = startSketchOn(mountingBracket, face = seg05E)
        instances = 2,
        axis = [0, 0, 1],
        center = [0, 0, 0],
-       arcDegrees = 360,
+       arcDegrees = 360deg,
        rotateDuplicates = true,
      )

public/kcl-samples/cpu-cooler/main.kcl

@@ -37,7 +37,7 @@ mountingWire
        instances = 2,
        axis = [0, 1, 0],
        center = [0, 0, 40 + fanSize / 2],
-       arcDegrees = 360,
+       arcDegrees = 360deg,
        rotateDuplicates = true,
      )
   |> patternCircular3d(
@@ -45,7 +45,7 @@ mountingWire
        instances = 2,
        axis = [0, 0, 1],
        center = [0, 0, 0],
-       arcDegrees = 360,
+       arcDegrees = 360deg,
        rotateDuplicates = true,
      )
 removableSticker

public/kcl-samples/cpu-cooler/mounting-wire.kcl

@@ -11,29 +11,29 @@ import * from "parameters.kcl"
 upperArm = startSketchOn(offsetPlane(XZ, offset = fanSize / 2 + 2))
   |> startProfile(at = [-12, 40 + fanSize / 2])
   |> yLine(length = 7)
-  |> tangentialArc(radius = 2, angle = 90)
+  |> tangentialArc(radius = 2, angle = 90deg)
   |> xLine(length = -9)
-  |> tangentialArc(radius = 2, angle = -90)
+  |> tangentialArc(radius = 2, angle = -90deg)
   |> yLine(length = 14)
-  |> tangentialArc(radius = 2, angle = 90)
+  |> tangentialArc(radius = 2, angle = 90deg)
   |> xLine(length = -9)
-  |> tangentialArc(radius = 2, angle = -80)
-  |> angledLine(angle = 100, endAbsoluteY = 40 + fanSize / 2 + mountingHoleSpacing / 2 - 1.5)
-  |> tangentialArc(radius = 2, angle = 80, tag = $seg07)
+  |> tangentialArc(radius = 2, angle = -80deg)
+  |> angledLine(angle = 100deg, endAbsoluteY = 40 + fanSize / 2 + mountingHoleSpacing / 2 - 1.5)
+  |> tangentialArc(radius = 2, angle = 80deg, tag = $seg07)
 
 // Draw the XZ component of the mounting wire path
 lowerArm = startSketchOn(offsetPlane(XZ, offset = fanSize / 2 + 2))
   |> startProfile(at = [-12, 40 + fanSize / 2])
   |> yLine(length = -7)
-  |> tangentialArc(radius = 2, angle = -90)
+  |> tangentialArc(radius = 2, angle = -90deg)
   |> xLine(length = -9)
-  |> tangentialArc(radius = 2, angle = 90)
+  |> tangentialArc(radius = 2, angle = 90deg)
   |> yLine(length = -14)
-  |> tangentialArc(radius = 2, angle = -90)
+  |> tangentialArc(radius = 2, angle = -90deg)
   |> xLine(length = -9)
-  |> tangentialArc(radius = 2, angle = 80)
-  |> angledLine(angle = -100, endAbsoluteY = 40 + fanSize / 2 - (mountingHoleSpacing / 2) + 1.5)
-  |> tangentialArc(radius = 2, angle = -80, tag = $seg08)
+  |> tangentialArc(radius = 2, angle = 80deg)
+  |> angledLine(angle = -100deg, endAbsoluteY = 40 + fanSize / 2 - (mountingHoleSpacing / 2) + 1.5)
+  |> tangentialArc(radius = 2, angle = -80deg, tag = $seg08)
 
 // Create the profile of the mounting wire and sweep along the XZ path
 wireProfile = startSketchOn(offsetPlane(XY, offset = 40 + fanSize / 2))
@@ -47,18 +47,18 @@ sweepLowerArm = circle(wireProfile, center = [-12, -fanSize / 2 - 2], radius = 1
 upperHook = startSketchOn(offsetPlane(XY, offset = segEndY(seg07)))
   |> startProfile(at = [segEndX(seg07), -fanSize / 2 - 2])
   |> xLine(endAbsolute = -heatSinkDepth / 2 - fanHeight)
-  |> tangentialArc(radius = 2, angle = -90)
+  |> tangentialArc(radius = 2, angle = -90deg)
   |> yLine(endAbsolute = -mountingHoleSpacing / 2 - 2)
-  |> tangentialArc(radius = 2, angle = -90)
+  |> tangentialArc(radius = 2, angle = -90deg)
   |> xLine(length = fanHeight / 3)
 
 // Draw the XY components of the mounting wire path
 lowerHook = startSketchOn(offsetPlane(XY, offset = segEndY(seg08)))
   |> startProfile(at = [segEndX(seg07), -fanSize / 2 - 2])
   |> xLine(endAbsolute = -heatSinkDepth / 2 - fanHeight)
-  |> tangentialArc(radius = 2, angle = -90)
+  |> tangentialArc(radius = 2, angle = -90deg)
   |> yLine(endAbsolute = -mountingHoleSpacing / 2 - 2)
-  |> tangentialArc(radius = 2, angle = -90)
+  |> tangentialArc(radius = 2, angle = -90deg)
   |> xLine(length = fanHeight / 3)
 
 // Sweep the wire profile around the hook-shaped segments of the mounting wire