bump kcl friends (#5993)

Signed-off-by: Jess Frazelle <github@jessfraz.com>

.envrc

@@ -1 +1,3 @@
+source_up_if_exists
+
 use flake .

.github/workflows/e2e-tests.yml

@@ -1,7 +1,9 @@
 name: E2E Tests
 on:
   push:
-    branches: [ main ]
+    branches:
+      - main
+      - all-e2e # this bypasses `fixme()` using `orRunWhenFullSuiteEnabled()`
   pull_request:
   schedule:
     - cron: 0 * * * *  # hourly
@@ -15,7 +17,6 @@ permissions:
   pull-requests: write
   actions: read
 
-
 jobs:
 
   conditions:
@@ -67,14 +68,16 @@ jobs:
       - name: Display conditions
         shell: bash
         run: |
-          # For debugging purposes.
+          # For debugging purposes
           set -euo pipefail
+          echo "GITHUB_REF: $GITHUB_REF"
+          echo "GITHUB_HEAD_REF: $GITHUB_HEAD_REF"
+          echo "GITHUB_BASE_REF: $GITHUB_BASE_REF"
           echo "significant: ${{ steps.path-changes.outputs.significant }}"
           echo "should-run: ${{ steps.should-run.outputs.should-run }}"
 
-
   prepare-wasm:
-    # seperate job on Ubuntu to build or fetch the wasm blob once on the fastest runner
+    # separate job on Ubuntu to build or fetch the wasm blob once on the fastest runner
     runs-on: runs-on=${{ github.run_id }}/family=i7ie.2xlarge/image=ubuntu22-full-x64
     needs: conditions
     steps:
@@ -159,7 +162,6 @@ jobs:
           name: prepared-wasm
           path: |
             rust/kcl-wasm-lib/pkg/kcl_wasm_lib*
-  
 
   snapshots:
     name: playwright:snapshots:ubuntu
@@ -243,7 +245,7 @@ jobs:
           retention-days: 30
           overwrite: true
 
-      - name: check for changes
+      - name: Check for changes
         if: ${{ needs.conditions.outputs.should-run == 'true' && github.ref != 'refs/heads/main' }}
         shell: bash
         id: git-check

.github/workflows/static-analysis.yml

@@ -141,13 +141,13 @@ jobs:
         if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
         run: yarn playwright install chromium --with-deps
 
-      - name: run unit tests
+      - name: Run unit tests
         if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
         run: xvfb-run -a yarn test:unit
         env:
           VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
 
-      - name: check for changes
+      - name: Check for changes
         if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
         id: git-check
         run: |

.github/workflows/update-e2e-branch.yml

@@ -14,10 +14,19 @@ permissions:
 jobs:
   update-branch:
     runs-on: ubuntu-latest
-
     steps:
+      - uses: actions/create-github-app-token@v1
+        id: app-token
+        with:
+          app-id: ${{ secrets.MODELING_APP_GH_APP_ID }}
+          private-key: ${{ secrets.MODELING_APP_GH_APP_PRIVATE_KEY }}
+          owner: ${{ github.repository_owner }}
+
       - uses: actions/checkout@v4
-      - shell: bash
+        with:
+          token: ${{ steps.app-token.outputs.token }}
+
+      - name: Sync with main
         run: |
           # checkout our branch
           git checkout all-e2e || git checkout -b all-e2e
@@ -26,4 +35,5 @@ jobs:
           # reset to main
           git reset --hard origin/main
           # force push it
+          git remote set-url origin https://x-access-token:${{ steps.app-token.outputs.token }}@github.com/${{ github.repository }}.git
           git push --force origin all-e2e

Makefile

@@ -20,8 +20,12 @@ $(WASM_PACK):
 ###############################################################################
 # BUILD
 
-RUST_SOURCES := $(wildcard rust/*) $(wildcard rust/**/*)
+CARGO_SOURCES := rust/.cargo/config.toml $(wildcard rust/Cargo.*) $(wildcard rust/**/Cargo.*)
-TYPESCRIPT_SOURCES := $(wildcard src/**/*.tsx) $(wildcard src/**/*.ts)
+RUST_SOURCES := $(wildcard rust/**/*.rs)
+
+REACT_SOURCES := $(wildcard src/*.tsx) $(wildcard src/**/*.tsx)
+TYPESCRIPT_SOURCES := tsconfig.* $(wildcard src/*.ts) $(wildcard src/**/*.ts)
+VITE_SOURCES := $(wildcard vite.*) $(wildcard vite/**/*.tsx)
 
 .PHONY: build
 build: build-web build-desktop
@@ -32,13 +36,13 @@ build-web: public/kcl_wasm_lib_bg.wasm build/index.html
 .PHONY: build-desktop
 build-desktop: public/kcl_wasm_lib_bg.wasm .vite/build/main.js
 
-public/kcl_wasm_lib_bg.wasm: $(RUST_SOURCES)
+public/kcl_wasm_lib_bg.wasm: $(CARGO_SOURCES)$(RUST_SOURCES)
 	yarn build:wasm
 
-build/index.html: $(TYPESCRIPT_SOURCES)
+build/index.html: $(REACT_SOURCES) $(TYPESCRIPT_SOURCES) $(VITE_SOURCES)
 	yarn build:local
 
-.vite/build/main.js: $(TYPESCRIPT_SOURCES)
+.vite/build/main.js: $(REACT_SOURCES) $(TYPESCRIPT_SOURCES) $(VITE_SOURCES)
 	yarn tronb:vite:dev
 
 ###############################################################################
@@ -73,19 +77,29 @@ run-desktop: install build-desktop ## Start the desktop app
 ###############################################################################
 # TEST
 
-GREP ?= ""
+E2E_WORKERS ?= 1
+E2E_FAILURES ?= 1
+E2E_GREP ?= ""
 
 .PHONY: test
 test: test-unit test-e2e
 
 .PHONY: test-unit
 test-unit: install ## Run the unit tests
-	@ nc -z localhost 3000 || ( echo "Error: localhost:3000 not available, 'make run-web' first" && exit 1 )
+	@ curl -fs localhost:3000 >/dev/null || ( echo "Error: localhost:3000 not available, 'make run-web' first" && exit 1 )
 	yarn test:unit
 
 .PHONY: test-e2e
-test-e2e: install build-desktop ## Run the e2e tests
+test-e2e: test-e2e-desktop
-	yarn test:playwright:electron --workers=1 --grep=$(GREP)
+
+.PHONY: test-e2e-web
+test-e2e-web: install build-web ## Run the web e2e tests
+	@ curl -fs localhost:3000 >/dev/null || ( echo "Error: localhost:3000 not available, 'make run-web' first" && exit 1 )
+	yarn chrome:test --headed --workers=$(E2E_WORKERS) --max-failures=$(E2E_FAILURES) --grep=$(E2E_GREP)
+
+.PHONY: test-e2e-desktop
+test-e2e-desktop: install build-desktop ## Run the desktop e2e tests
+	yarn test:playwright:electron --workers=$(E2E_WORKERS) --max-failures=$(E2E_FAILURES) --grep=$(E2E_GREP)
 
 ###############################################################################
 # CLEAN

docs/kcl/circleThreePoint.md

@@ -10,10 +10,10 @@ Construct a circle derived from 3 points.
 
 ```js
 circleThreePoint(
+  sketchSurfaceOrGroup: SketchOrSurface,
   p1: [number],
   p2: [number],
   p3: [number],
-  sketchSurfaceOrGroup: SketchOrSurface,
   tag?: TagDeclarator,
 ): Sketch
 ```
@@ -23,10 +23,10 @@ circleThreePoint(
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
+| `sketchSurfaceOrGroup` | [`SketchOrSurface`](/docs/kcl/types/SketchOrSurface) | Plane or surface to sketch on. | Yes |
 | `p1` | [`[number]`](/docs/kcl/types/number) | 1st point to derive the circle. | Yes |
 | `p2` | [`[number]`](/docs/kcl/types/number) | 2nd point to derive the circle. | Yes |
 | `p3` | [`[number]`](/docs/kcl/types/number) | 3rd point to derive the circle. | Yes |
-| `sketchSurfaceOrGroup` | [`SketchOrSurface`](/docs/kcl/types/SketchOrSurface) | Plane or surface to sketch on. | Yes |
 | [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Identifier for the circle to reference elsewhere. | No |
 
 ### Returns

docs/kcl/consts/std-math-E.md

@@ -15,7 +15,7 @@ std::math::E: number = 2.71828182845904523536028747135266250_
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
     angle = 30,

docs/kcl/consts/std-math-PI.md

@@ -17,7 +17,7 @@ std::math::PI: number = 3.14159265358979323846264338327950288_
 ```js
 circumference = 70
 
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
  |> circle(center = [0, 0], radius = circumference/ (2 * PI))
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/consts/std-math-TAU.md

@@ -15,7 +15,7 @@ std::math::TAU: number = 6.28318530717958647692528676655900577_
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
     angle = 50,

docs/kcl/index.md

@@ -61,7 +61,6 @@ layout: manual
   * [`bezierCurve`](kcl/bezierCurve)
   * [`ceil`](kcl/ceil)
   * [`chamfer`](kcl/chamfer)
-  * [`circle`](kcl/circle)
   * [`circleThreePoint`](kcl/circleThreePoint)
   * [`close`](kcl/close)
   * [`cm`](kcl/cm)
@@ -74,7 +73,6 @@ layout: manual
   * [`getOppositeEdge`](kcl/getOppositeEdge)
   * [`getPreviousAdjacentEdge`](kcl/getPreviousAdjacentEdge)
   * [`helix`](kcl/helix)
-  * [`helixRevolutions`](kcl/helixRevolutions)
   * [`hole`](kcl/hole)
   * [`hollow`](kcl/hollow)
   * [`inch`](kcl/inch)
@@ -146,3 +144,5 @@ layout: manual
   * [`cos`](kcl/std-math-cos)
   * [`sin`](kcl/std-math-sin)
   * [`tan`](kcl/std-math-tan)
+* **std::sketch**
+  * [`circle`](kcl/std-sketch-circle)

docs/kcl/std-math-cos.md

@@ -9,7 +9,7 @@ Compute the cosine of a number (in radians).
 
 
 ```js
-cos(num: number(rad)): number(_)
+cos(@num: number(rad)): number(_)
 ```
 
 
@@ -27,7 +27,7 @@ cos(num: number(rad)): number(_)
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
     angle = 30,

docs/kcl/std-math-sin.md

@@ -9,7 +9,7 @@ Compute the sine of a number (in radians).
 
 
 ```js
-sin(num: number(rad)): number(_)
+sin(@num: number(rad)): number(_)
 ```
 
 
@@ -27,7 +27,7 @@ sin(num: number(rad)): number(_)
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
     angle = 50,

docs/kcl/std-math-tan.md

@@ -9,7 +9,7 @@ Compute the tangent of a number (in radians).
 
 
 ```js
-tan(num: number(rad)): number(_)
+tan(@num: number(rad)): number(_)
 ```
 
 
@@ -27,7 +27,7 @@ tan(num: number(rad)): number(_)
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
     angle = 50,

docs/kcl/types/HelixValue.md

@@ -21,6 +21,7 @@ A helix.
 | `revolutions` |[`number`](/docs/kcl/types/number)| Number of revolutions. | No |
 | `angleStart` |[`number`](/docs/kcl/types/number)| Start angle (in degrees). | No |
 | `ccw` |`boolean`| Is the helix rotation counter clockwise? | No |
+| `cylinderId` |[`string`](/docs/kcl/types/string)| The cylinder the helix was created on. | No |
 | `units` |[`UnitLen`](/docs/kcl/types/UnitLen)| A unit of length. | No |
 
 

docs/kcl/types/Point2d.md

@@ -10,8 +10,8 @@ A point in two dimensional space.
 type Point2d = [number; 2]
 ```
 
-`Point2d` is an alias for a two-element array of [number](/docs/kcl/types/number)s. To write a value
+[`Point2d`](/docs/kcl/types/Point2d) is an alias for a two-element array of [number](/docs/kcl/types/number)s. To write a value
-with type `Point2d`, use an array, e.g., `[0, 0]` or `[5.0, 3.14]`.
+with type [`Point2d`](/docs/kcl/types/Point2d), use an array, e.g., `[0, 0]` or `[5.0, 3.14]`.
 
 
 

docs/kcl/types/Point3d.md

@@ -10,8 +10,8 @@ A point in three dimensional space.
 type Point3d = [number; 3]
 ```
 
-`Point3d` is an alias for a three-element array of [number](/docs/kcl/types/number)s. To write a value
+[`Point3d`](/docs/kcl/types/Point3d) is an alias for a three-element array of [number](/docs/kcl/types/number)s. To write a value
-with type `Point3d`, use an array, e.g., `[0, 0, 0]` or `[5.0, 3.14, 6.8]`.
+with type [`Point3d`](/docs/kcl/types/Point3d), use an array, e.g., `[0, 0, 0]` or `[5.0, 3.14, 6.8]`.
 
 
 

docs/kcl/types/Sketch.md

@@ -17,7 +17,7 @@ mySketch = startSketchOn('XY')
     |> close()
 ```
 
-The `mySketch` variable will be an executed `Sketch` object. Executed being past
+The `mySketch` variable will be an executed [`Sketch`](/docs/kcl/types/Sketch) object. Executed being past
 tense, because the engine has already executed the commands to create the sketch.
 
 The previous sketch commands will never be executed again, in this case.

docs/kcl/types/Solid.md

@@ -18,7 +18,7 @@ myPart = startSketchOn('XY')
     |> extrude(length = 6)
 ```
 
-The `myPart` variable will be an executed `Solid` object. Executed being past
+The `myPart` variable will be an executed [`Solid`](/docs/kcl/types/Solid) object. Executed being past
 tense, because the engine has already executed the commands to create the solid.
 
 The previous solid commands will never be executed again, in this case.

e2e/playwright/basic-sketch.spec.ts

@@ -85,7 +85,7 @@ async function doBasicSketch(
   await page.mouse.click(startXPx, 500 - PUR * 20)
   if (openPanes.includes('code')) {
     await expect(u.codeLocator)
-      .toHaveText(`@settings(defaultLengthUnit = in)sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${
+      .toHaveText(`sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${
       commonPoints.startAt
     }, sketch001)
   |> xLine(length = ${commonPoints.num1})
@@ -145,7 +145,7 @@ async function doBasicSketch(
   // Open the code pane.
   await u.openKclCodePanel()
   await expect(u.codeLocator)
-    .toHaveText(`@settings(defaultLengthUnit = in)sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${
+    .toHaveText(`sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${
     commonPoints.startAt
   }, sketch001)
   |> xLine(length = ${commonPoints.num1}, tag = $seg01)

e2e/playwright/can-create-sketches-on-all-planes-and-their-back-sides.spec.ts

@@ -46,7 +46,7 @@ test.describe(
         },
       }
 
-      const code = `@settings(defaultLengthUnit = in)sketch001 = startSketchOn('${plane}')profile001 = startProfileAt([0.91, -1.22], sketch001)`
+      const code = `sketch001 = startSketchOn(${plane})profile001 = startProfileAt([0.91, -1.22], sketch001)`
 
       await u.openDebugPanel()
 

e2e/playwright/code-pane-and-errors.spec.ts

@@ -250,11 +250,11 @@ test(
       ])
       await Promise.all([
         fsp.copyFile(
-          executorInputPath('cylinder-inches.kcl'),
+          executorInputPath('router-template-slate.kcl'),
           join(routerTemplateDir, 'main.kcl')
         ),
         fsp.copyFile(
-          executorInputPath('e2e-can-sketch-on-chamfer.kcl'),
+          executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
           join(bracketDir, 'main.kcl')
         ),
       ])

e2e/playwright/desktop-export.spec.ts

@@ -20,11 +20,11 @@ test(
       await Promise.all([fsp.mkdir(bracketDir, { recursive: true })])
       await Promise.all([
         fsp.copyFile(
-          executorInputPath('cylinder-inches.kcl'),
+          executorInputPath('router-template-slate.kcl'),
           path.join(bracketDir, 'other.kcl')
         ),
         fsp.copyFile(
-          executorInputPath('e2e-can-sketch-on-chamfer.kcl'),
+          executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
           path.join(bracketDir, 'main.kcl')
         ),
       ])
@@ -107,7 +107,7 @@ test(
             },
             { timeout: 15_000 }
           )
-          .toBeGreaterThan(30_000)
+          .toBeGreaterThan(300_000)
       })
     })
 
@@ -187,7 +187,7 @@ test(
             },
             { timeout: 15_000 }
           )
-          .toBeGreaterThan(50_000)
+          .toBeGreaterThan(70_000)
       })
     })
   }

e2e/playwright/editor-tests.spec.ts

@@ -32,30 +32,26 @@ test.describe('Editor tests', { tag: ['@skipWin'] }, () => {
     await page.keyboard.press('/')
     await page.keyboard.up('ControlOrMeta')
 
-    await expect(page.locator('.cm-content')).toHaveText(
+    await expect(page.locator('.cm-content'))
-      `@settings(defaultLengthUnit = in)
+      .toHaveText(`sketch001 = startSketchOn(XY)
-sketch001 = startSketchOn('XY')
   |> startProfileAt([-10, -10], %)
   |> line(end = [20, 0])
   |> line(end = [0, 20])
   |> line(end = [-20, 0])
-  // |> close()`.replaceAll('\n', '')
+  // |> close()`)
-    )
 
     // uncomment the code
     await page.keyboard.down('ControlOrMeta')
     await page.keyboard.press('/')
     await page.keyboard.up('ControlOrMeta')
 
-    await expect(page.locator('.cm-content')).toHaveText(
+    await expect(page.locator('.cm-content'))
-      `@settings(defaultLengthUnit = in)
+      .toHaveText(`sketch001 = startSketchOn(XY)
-sketch001 = startSketchOn('XY')
   |> startProfileAt([-10, -10], %)
   |> line(end = [20, 0])
   |> line(end = [0, 20])
   |> line(end = [-20, 0])
-  |> close()`.replaceAll('\n', '')
+  |> close()`)
-    )
   })
 
   test('ensure we use the cache, and do not re-execute', async ({
@@ -182,15 +178,13 @@ sketch001 = startSketchOn('XY')
     await page.locator('#code-pane button:first-child').click()
     await page.locator('button:has-text("Format code")').click()
 
-    await expect(page.locator('.cm-content')).toHaveText(
+    await expect(page.locator('.cm-content'))
-      `@settings(defaultLengthUnit = in)
+      .toHaveText(`sketch001 = startSketchOn(XY)
-sketch001 = startSketchOn('XY')
   |> startProfileAt([-10, -10], %)
   |> line(end = [20, 0])
   |> line(end = [0, 20])
   |> line(end = [-20, 0])
-  |> close()`.replaceAll('\n', '')
+  |> close()`)
-    )
   })
 
   test('if you click the format button it formats your code and executes so lints are still there', async ({
@@ -233,15 +227,13 @@ sketch001 = startSketchOn('XY')
     await u.expectCmdLog('[data-message-type="execution-done"]')
     await u.closeDebugPanel()
 
-    await expect(page.locator('.cm-content')).toHaveText(
+    await expect(page.locator('.cm-content'))
-      `@settings(defaultLengthUnit = in)
+      .toHaveText(`sketch_001 = startSketchOn(XY)
-sketch_001 = startSketchOn('XY')
   |> startProfileAt([-10, -10], %)
   |> line(end = [20, 0])
   |> line(end = [0, 20])
   |> line(end = [-20, 0])
-  |> close()`.replaceAll('\n', '')
+  |> close()`)
-    )
 
     // error in guter
     await expect(page.locator('.cm-lint-marker-info').first()).toBeVisible()
@@ -823,12 +815,10 @@ sketch_001 = startSketchOn('XY')
       // there shouldn't be any auto complete options for 'lin' in the comment
       await expect(page.locator('.cm-completionLabel')).not.toBeVisible()
 
-      await expect(page.locator('.cm-content')).toHaveText(
+      await expect(page.locator('.cm-content'))
-        `@settings(defaultLengthUnit = in)
+        .toHaveText(`sketch001 = startSketchOn(XZ)
-sketch001 = startSketchOn('XZ')
         |> startProfileAt([3.14, 12], %)
-        |> xLine(%, length = 5) // lin`.replaceAll('\n', '')
+        |> xLine(%, length = 5) // lin`)
-      )
 
       // expect there to be no KCL errors
       await expect(page.locator('.cm-lint-marker-error')).toHaveCount(0)
@@ -898,12 +888,10 @@ sketch001 = startSketchOn('XZ')
       // there shouldn't be any auto complete options for 'lin' in the comment
       await expect(page.locator('.cm-completionLabel')).not.toBeVisible()
 
-      await expect(page.locator('.cm-content')).toHaveText(
+      await expect(page.locator('.cm-content'))
-        `@settings(defaultLengthUnit = in)
+        .toHaveText(`sketch001 = startSketchOn(XZ)
-sketch001 = startSketchOn('XZ')
         |> startProfileAt([3.14, 12], %)
-        |> xLine(%, length = 5) // lin`.replaceAll('\n', '')
+        |> xLine(%, length = 5) // lin`)
-      )
     })
   })
   test('Can undo a click and point extrude with ctrl+z', async ({

e2e/playwright/file-tree.spec.ts

@@ -6,6 +6,7 @@ import {
   executorInputPath,
   getUtils,
   orRunWhenFullSuiteEnabled,
+  runningOnWindows,
 } from './test-utils'
 import { join } from 'path'
 import { FILE_EXT } from 'lib/constants'
@@ -15,6 +16,9 @@ test.describe('integrations tests', () => {
     'Creating a new file or switching file while in sketchMode should exit sketchMode',
     { tag: '@electron' },
     async ({ page, context, homePage, scene, editor, toolbar, cmdBar }) => {
+      if (runningOnWindows()) {
+        test.fixme(orRunWhenFullSuiteEnabled())
+      }
       await context.folderSetupFn(async (dir) => {
         const bracketDir = join(dir, 'test-sample')
         await fsp.mkdir(bracketDir, { recursive: true })

e2e/playwright/fixtures/sceneFixture.ts

@@ -310,9 +310,7 @@ export async function expectPixelColor(
     .toBeTruthy()
     .catch((cause) => {
       throw new Error(
-        `ExpectPixelColor: point ${JSON.stringify(
+        `ExpectPixelColor: expecting ${colour} got ${finalValue}`,
-          coords
-        )} was expecting ${colour} but got ${finalValue}`,
         { cause }
       )
     })

e2e/playwright/machines.spec.ts

@@ -11,7 +11,7 @@ test(
       const bracketDir = join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('cylinder-inches.kcl'),
+        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
         join(bracketDir, 'main.kcl')
       )
     })
@@ -51,7 +51,7 @@ test(
       const bracketDir = join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('cylinder-inches.kcl'),
+        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
         join(bracketDir, 'main.kcl')
       )
     })

e2e/playwright/point-click.spec.ts

@@ -137,7 +137,7 @@ test.describe('Point-and-click tests', () => {
 
         await scene.moveCameraTo(cameraPos, cameraTarget)
 
-        await test.step('check chamfer selection changes cursor position', async () => {
+        await test.step('check chamfer selection changes cursor positon', async () => {
           await expect(async () => {
             // sometimes initial click doesn't register
             await clickChamfer()
@@ -173,7 +173,7 @@ test.describe('Point-and-click tests', () => {
         })
         await test.step('Check there is no errors after code created in previous steps executes', async () => {
           await editor.expectState({
-            activeLines: ['@settings(defaultLengthUnit = in)'],
+            activeLines: ['sketch001 = startSketchOn(XZ)'],
             highlightedCode: '',
             diagnostics: [],
           })
@@ -299,8 +299,7 @@ test.describe('Point-and-click tests', () => {
 
       await test.step('verify at the end of the test that final code is what is expected', async () => {
         await editor.expectEditor.toContain(
-          `@settings(defaultLengthUnit = in)
+          `sketch001 = startSketchOn(XZ)
-sketch001 = startSketchOn(XZ)
   |> startProfileAt([75.8, 317.2], %) // [$startCapTag, $EndCapTag]
   |> angledLine([0, 268.43], %, $rectangleSegmentA001)
   |> angledLine([
@@ -370,7 +369,7 @@ profile001 = startProfileAt([205.96, 254.59], sketch002)
       })
     })
 
-    test('Works on chamfers that are not in a pipeExpression can break up multi edges in a chamfer array', async ({
+    test('Works on chamfers that are non in a pipeExpression can break up multi edges in a chamfer array', async ({
       context,
       page,
       homePage,
@@ -419,8 +418,7 @@ profile001 = startProfileAt([205.96, 254.59], sketch002)
         |>close()`,
       })
       await editor.expectEditor.toContain(
-        `@settings(defaultLengthUnit = in)
+        `sketch001 = startSketchOn(XZ)
-sketch001 = startSketchOn(XZ)
   |> startProfileAt([75.8, 317.2], %)
   |> angledLine([0, 268.43], %, $rectangleSegmentA001)
   |> angledLine([
@@ -1073,7 +1071,7 @@ openSketch = startSketchOn(XY)
     })
   })
 
-  test('Helix point-and-click', async ({
+  test('Helix point-and-click on default axis', async ({
     context,
     page,
     homePage,
@@ -1084,29 +1082,26 @@ openSketch = startSketchOn(XY)
   }) => {
     // One dumb hardcoded screen pixel value
     const testPoint = { x: 620, y: 257 }
-    const expectedOutput = `helix001 = helix(  revolutions = 1,  angleStart = 360,  counterClockWise = false,  radius = 5,  axis = 'X',  length = 5,)`
+    const expectedOutput = `helix001 = helix(  revolutions = 1,  angleStart = 360,  ccw = false,  radius = 5,  axis = 'X',  length = 5,)`
     const expectedLine = `revolutions=1,`
 
     await homePage.goToModelingScene()
 
-    // await test.step(`Look for the red of the default plane`, async () => {
-    //   await scene.expectPixelColor([96, 52, 52], testPoint, 15)
-    // })
     await test.step(`Go through the command bar flow`, async () => {
       await toolbar.helixButton.click()
       await cmdBar.expectState({
         stage: 'arguments',
-        currentArgKey: 'revolutions',
+        currentArgKey: 'axisOrEdge',
-        currentArgValue: '1',
+        currentArgValue: '',
         headerArguments: {
           AngleStart: '',
-          Axis: '',
+          AxisOrEdge: '',
           CounterClockWise: '',
           Length: '',
           Radius: '',
           Revolutions: '',
         },
-        highlightedHeaderArg: 'revolutions',
+        highlightedHeaderArg: 'axisOrEdge',
         commandName: 'Helix',
       })
       await cmdBar.progressCmdBar()
@@ -1116,6 +1111,7 @@ openSketch = startSketchOn(XY)
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
+      await cmdBar.progressCmdBar()
     })
 
     await test.step(`Confirm code is added to the editor, scene has changed`, async () => {
@@ -1181,6 +1177,165 @@ openSketch = startSketchOn(XY)
     })
   })
 
+  const helixCases = [
+    {
+      selectionType: 'segment',
+      testPoint: { x: 513, y: 221 },
+      expectedOutput: `helix001 = helix(  revolutions = 20,  angleStart = 0,  ccw = true,  radius = 1,  axis = seg01,  length = 100,)`,
+      expectedEditedOutput: `helix001 = helix(  revolutions = 20,  angleStart = 0,  ccw = true,  radius = 1,  axis = seg01,  length = 50,)`,
+    },
+    {
+      selectionType: 'sweepEdge',
+      testPoint: { x: 564, y: 364 },
+      expectedOutput: `helix001 = helix(  revolutions = 20,  angleStart = 0,  ccw = true,  radius = 1,  axis =   getOppositeEdge(seg01),  length = 100,)`,
+      expectedEditedOutput: `helix001 = helix(  revolutions = 20,  angleStart = 0,  ccw = true,  radius = 1,  axis =   getOppositeEdge(seg01),  length = 50,)`,
+    },
+  ]
+  helixCases.map(
+    ({ selectionType, testPoint, expectedOutput, expectedEditedOutput }) => {
+      test(`Helix point-and-click around ${selectionType}`, async ({
+        context,
+        page,
+        homePage,
+        scene,
+        editor,
+        toolbar,
+        cmdBar,
+      }) => {
+        page.on('console', console.log)
+        const initialCode = `sketch001 = startSketchOn('XZ')
+  profile001 = startProfileAt([0, 0], sketch001)
+    |> yLine(length = 100)
+    |> line(endAbsolute = [100, 0])
+    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+    |> close()
+  extrude001 = extrude(profile001, length = 100)`
+
+        // One dumb hardcoded screen pixel value
+        const [clickOnEdge] = scene.makeMouseHelpers(testPoint.x, testPoint.y)
+
+        await context.addInitScript((initialCode) => {
+          localStorage.setItem('persistCode', initialCode)
+        }, initialCode)
+        await page.setBodyDimensions({ width: 1000, height: 500 })
+        await homePage.goToModelingScene()
+
+        await test.step(`Go through the command bar flow`, async () => {
+          await toolbar.closePane('code')
+          await toolbar.helixButton.click()
+          await cmdBar.expectState({
+            stage: 'arguments',
+            currentArgKey: 'axisOrEdge',
+            currentArgValue: '',
+            headerArguments: {
+              AngleStart: '',
+              AxisOrEdge: '',
+              CounterClockWise: '',
+              Length: '',
+              Radius: '',
+              Revolutions: '',
+            },
+            highlightedHeaderArg: 'axisOrEdge',
+            commandName: 'Helix',
+          })
+          await cmdBar.selectOption({ name: 'Edge' }).click()
+          await clickOnEdge()
+          await cmdBar.progressCmdBar()
+          await cmdBar.argumentInput.focus()
+          await page.keyboard.insertText('20')
+          await cmdBar.progressCmdBar()
+          await page.keyboard.insertText('0')
+          await cmdBar.progressCmdBar()
+          await cmdBar.selectOption({ name: 'True' }).click()
+          await page.keyboard.insertText('1')
+          await cmdBar.progressCmdBar()
+          await page.keyboard.insertText('100')
+          await cmdBar.progressCmdBar()
+          await cmdBar.expectState({
+            stage: 'review',
+            headerArguments: {
+              AngleStart: '0',
+              AxisOrEdge: 'Edge',
+              Edge: `1 ${selectionType}`,
+              CounterClockWise: '',
+              Length: '100',
+              Radius: '1',
+              Revolutions: '20',
+            },
+            commandName: 'Helix',
+          })
+          await cmdBar.progressCmdBar()
+        })
+
+        await test.step(`Confirm code is added to the editor, scene has changed`, async () => {
+          await toolbar.openPane('code')
+          await editor.expectEditor.toContain(expectedOutput)
+          await toolbar.closePane('code')
+        })
+
+        await test.step(`Edit helix through the feature tree`, async () => {
+          await toolbar.openPane('feature-tree')
+          const operationButton = await toolbar.getFeatureTreeOperation(
+            'Helix',
+            0
+          )
+          await operationButton.dblclick()
+          const initialInput = '100'
+          const newInput = '50'
+          await cmdBar.expectState({
+            commandName: 'Helix',
+            stage: 'arguments',
+            currentArgKey: 'length',
+            currentArgValue: initialInput,
+            headerArguments: {
+              AngleStart: '0',
+              CounterClockWise: '',
+              Length: initialInput,
+              Radius: '1',
+              Revolutions: '20',
+            },
+            highlightedHeaderArg: 'length',
+          })
+          await expect(cmdBar.currentArgumentInput).toBeVisible()
+          await cmdBar.currentArgumentInput
+            .locator('.cm-content')
+            .fill(newInput)
+          await cmdBar.progressCmdBar()
+          await cmdBar.expectState({
+            stage: 'review',
+            headerArguments: {
+              AngleStart: '0',
+              CounterClockWise: '',
+              Length: newInput,
+              Radius: '1',
+              Revolutions: '20',
+            },
+            commandName: 'Helix',
+          })
+          await cmdBar.progressCmdBar()
+          await toolbar.closePane('feature-tree')
+          await toolbar.openPane('code')
+          await editor.expectEditor.toContain(expectedEditedOutput)
+          await toolbar.closePane('code')
+        })
+
+        await test.step('Delete helix via feature tree selection', async () => {
+          await toolbar.openPane('feature-tree')
+          const operationButton = await toolbar.getFeatureTreeOperation(
+            'Helix',
+            0
+          )
+          await operationButton.click({ button: 'left' })
+          await page.keyboard.press('Delete')
+          await editor.expectEditor.not.toContain(expectedEditedOutput)
+          await expect(
+            await toolbar.getFeatureTreeOperation('Helix', 0)
+          ).not.toBeVisible()
+        })
+      })
+    }
+  )
+
   const loftPointAndClickCases = [
     { shouldPreselect: true },
     { shouldPreselect: false },
@@ -1342,8 +1497,7 @@ loft001 = loft([sketch001, sketch002])
     {
       targetType: 'circle',
       testPoint: { x: 700, y: 250 },
-      initialCode: `@settings(defaultLengthUnit = in)
+      initialCode: `sketch001 = startSketchOn('YZ')
-sketch001 = startSketchOn('YZ')
 profile001 = circle(sketch001, center = [0, 0], radius = 500)
 sketch002 = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
@@ -1353,8 +1507,7 @@ sketch002 = startSketchOn('XZ')
     {
       targetType: 'rectangle',
       testPoint: { x: 710, y: 255 },
-      initialCode: `@settings(defaultLengthUnit = in)
+      initialCode: `sketch001 = startSketchOn('YZ')
-sketch001 = startSketchOn('YZ')
 profile001 = startProfileAt([-400, -400], sketch001)
   |> angledLine([0, 800], %, $rectangleSegmentA001)
   |> angledLine([
@@ -1511,8 +1664,7 @@ sketch002 = startSketchOn('XZ')
     toolbar,
     cmdBar,
   }) => {
-    const initialCode = `@settings(defaultLengthUnit = in)
+    const initialCode = `sketch001 = startSketchOn(YZ)
-sketch001 = startSketchOn(YZ)
   |> circle(
        center = [0, 0],
        radius = 500
@@ -2079,8 +2231,7 @@ extrude001 = extrude(profile001, length = 5)
     cmdBar,
   }) => {
     // Code samples
-    const initialCode = `@settings(defaultLengthUnit = in)
+    const initialCode = `sketch001 = startSketchOn(XY)
-sketch001 = startSketchOn(XY)
   |> startProfileAt([-12, -6], %)
   |> line(end = [0, 12])
   |> line(end = [24, 0])
@@ -2304,8 +2455,7 @@ extrude001 = extrude(sketch001, length = -12)
     toolbar,
   }) => {
     // Code samples
-    const initialCode = `@settings(defaultLengthUnit = in)
+    const initialCode = `sketch001 = startSketchOn(XY)
-sketch001 = startSketchOn(XY)
   |> startProfileAt([-12, -6], %)
   |> line(end = [0, 12])
   |> line(end = [24, 0], tag = $seg02)
@@ -2459,8 +2609,7 @@ chamfer04 = chamfer(extrude001, length = 5, tags = [getOppositeEdge(seg02)])
       toolbar,
       cmdBar,
     }) => {
-      const initialCode = `@settings(defaultLengthUnit = in)
+      const initialCode = `sketch001 = startSketchOn(XZ)
-sketch001 = startSketchOn(XZ)
   |> circle(center = [0, 0], radius = 30)
 extrude001 = extrude(sketch001, length = 30)
     `
@@ -2595,8 +2744,7 @@ extrude001 = extrude(sketch001, length = 30)
     toolbar,
     cmdBar,
   }) => {
-    const initialCode = `@settings(defaultLengthUnit = in)
+    const initialCode = `sketch001 = startSketchOn(XY)
-sketch001 = startSketchOn(XY)
   |> startProfileAt([-20, 20], %)
   |> xLine(length = 40)
   |> yLine(length = -60)
@@ -2714,8 +2862,7 @@ extrude001 = extrude(sketch001, length = 40)
   })
 
   const shellSketchOnFacesCases = [
-    `@settings(defaultLengthUnit = in)
+    `sketch001 = startSketchOn(XZ)
-sketch001 = startSketchOn(XZ)
   |> circle(center = [0, 0], radius = 100)
   |> extrude(length = 100)
 
@@ -2723,8 +2870,7 @@ sketch002 = startSketchOn(sketch001, 'END')
   |> circle(center = [0, 0], radius = 50)
   |> extrude(length = 50)
   `,
-    `@settings(defaultLengthUnit = in)
+    `sketch001 = startSketchOn(XZ)
-sketch001 = startSketchOn(XZ)
   |> circle(center = [0, 0], radius = 100)
 extrude001 = extrude(sketch001, length = 100)
 
@@ -3120,8 +3266,7 @@ radius = 8.69
     toolbar,
     cmdBar,
   }) => {
-    const initialCode = `@settings(defaultLengthUnit = in)
+    const initialCode = `sketch001 = startSketchOn(XZ)
-sketch001 = startSketchOn(XZ)
 profile001 = circle(
   sketch001,
   center = [0, 0],

e2e/playwright/projects.spec.ts

@@ -86,7 +86,7 @@ test(
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('cylinder-inches.kcl'),
+        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
         path.join(bracketDir, 'main.kcl')
       )
     })
@@ -123,7 +123,7 @@ test(
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('cylinder-inches.kcl'),
+        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
         path.join(bracketDir, 'main.kcl')
       )
       const errorDir = path.join(dir, 'broken-code')
@@ -191,7 +191,7 @@ test(
 
       // error text on hover
       await page.hover('.cm-lint-marker-error')
-      const crypticErrorText = `Expected a tag declarator`
+      const crypticErrorText = `The arg tag was given, but it was the wrong type`
       await expect(page.getByText(crypticErrorText).first()).toBeVisible()
 
       // black pixel means the scene has been cleared.
@@ -212,7 +212,7 @@ test(
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('cylinder-inches.kcl'),
+        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
         path.join(bracketDir, 'main.kcl')
       )
       const emptyDir = path.join(dir, 'empty')
@@ -289,7 +289,7 @@ test(
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('cylinder-inches.kcl'),
+        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
         path.join(bracketDir, 'main.kcl')
       )
 
@@ -355,7 +355,7 @@ test(
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('cylinder-inches.kcl'),
+        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
         path.join(bracketDir, 'main.kcl')
       )
       await fsp.copyFile(
@@ -409,7 +409,7 @@ test(
 
       // error text on hover
       await page.hover('.cm-lint-marker-error')
-      const crypticErrorText = `Expected a tag declarator`
+      const crypticErrorText = `The arg tag was given, but it was the wrong type`
       await expect(page.getByText(crypticErrorText).first()).toBeVisible()
 
       // black pixel means the scene has been cleared.
@@ -453,7 +453,7 @@ test(
 
     // error text on hover
     await page.hover('.cm-lint-marker-error')
-    const crypticErrorText = `Expected a tag declarator`
+    const crypticErrorText = `The arg tag was given, but it was the wrong type`
     await expect(page.getByText(crypticErrorText).first()).toBeVisible()
   }
 )
@@ -474,7 +474,7 @@ test.describe('Can export from electron app', () => {
           const bracketDir = path.join(dir, 'bracket')
           await fsp.mkdir(bracketDir, { recursive: true })
           await fsp.copyFile(
-            executorInputPath('cylinder-inches.kcl'),
+            executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
             path.join(bracketDir, 'main.kcl')
           )
         })
@@ -1497,12 +1497,7 @@ test(
 
     await u.waitForPageLoad()
 
-    // The file should be prepopulated with the user's unit settings.
+    await page.locator('.cm-content').fill(`sketch001 = startSketchOn(XZ)
-    await expect(page.locator('.cm-content')).toHaveText(
-      '@settings(defaultLengthUnit = in)'
-    )
-
-    await page.locator('.cm-content').fill(`sketch001 = startSketchOn('XZ')
   |> startProfileAt([-87.4, 282.92], %)
   |> line(end = [324.07, 27.199], tag = $seg01)
   |> line(end = [118.328, -291.754])

e2e/playwright/regression-tests.spec.ts

@@ -4,9 +4,9 @@ import path from 'path'
 import * as fsp from 'fs/promises'
 import {
   getUtils,
+  executorInputPath,
   TEST_COLORS,
   TestColor,
-  executorInputPath,
   orRunWhenFullSuiteEnabled,
 } from './test-utils'
 import { TEST_CODE_TRIGGER_ENGINE_EXPORT_ERROR } from './storageStates'
@@ -582,7 +582,7 @@ extrude002 = extrude(profile002, length = 150)
         const bracketDir = path.join(dir, 'bracket')
         await fsp.mkdir(bracketDir, { recursive: true })
         await fsp.copyFile(
-          executorInputPath('cylinder-inches.kcl'),
+          executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
           path.join(bracketDir, 'main.kcl')
         )
       })
@@ -632,13 +632,12 @@ extrude002 = extrude(profile002, length = 150)
 
     await test.step(`Load an empty file`, async () => {
       await page.addInitScript(async () => {
-        localStorage.setItem('persistCode', '@settings(defaultLengthUnit = in)')
+        localStorage.setItem('persistCode', '')
       })
       await page.setBodyDimensions({ width: 1200, height: 500 })
       await homePage.goToModelingScene()
       await u.waitForPageLoad()
       await u.closeKclCodePanel()
-      await page.waitForTimeout(20)
     })
 
     await test.step(`Zoom out until you can't see the default planes`, async () => {
@@ -647,14 +646,13 @@ extrude002 = extrude(profile002, length = 150)
           timeout: 5000,
           message: 'Plane color is visible',
         })
-        .toBeLessThanOrEqual(20)
+        .toBeLessThanOrEqual(15)
 
       let maxZoomOuts = 10
       let middlePixelIsBackgroundColor =
         (await middlePixelIsColor(bgColor)) < 10
       while (!middlePixelIsBackgroundColor && maxZoomOuts > 0) {
         await page.keyboard.down('Control')
-        await page.waitForTimeout(20)
         await page.mouse.move(600, 460)
         await page.mouse.down({ button: 'right' })
         await page.mouse.move(600, 50, { steps: 20 })
@@ -662,7 +660,7 @@ extrude002 = extrude(profile002, length = 150)
         await page.keyboard.up('Control')
         await page.waitForTimeout(100)
         maxZoomOuts--
-        middlePixelIsBackgroundColor = (await middlePixelIsColor(bgColor)) < 15
+        middlePixelIsBackgroundColor = (await middlePixelIsColor(bgColor)) < 10
       }
 
       expect(middlePixelIsBackgroundColor, {
@@ -680,12 +678,13 @@ extrude002 = extrude(profile002, length = 150)
     homePage,
     scene,
     toolbar,
+    viewport,
   }) => {
     await context.folderSetupFn(async (dir) => {
       const legoDir = path.join(dir, 'lego')
       await fsp.mkdir(legoDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('e2e-can-sketch-on-chamfer.kcl'),
+        executorInputPath('lego.kcl'),
         path.join(legoDir, 'main.kcl')
       )
     })
@@ -698,8 +697,11 @@ extrude002 = extrude(profile002, length = 150)
       await scene.loadingIndicator.waitFor({ state: 'detached' })
     })
     await test.step(`The part should start loading quickly, not waiting until execution is complete`, async () => {
-      // TODO: use the viewport size to pick the center point, but the `viewport` fixutre's values were wrong.
+      await scene.expectPixelColor(
-      await scene.expectPixelColor([143, 143, 143], { x: 500, y: 250 }, 15)
+        [143, 143, 143],
+        { x: (viewport?.width ?? 1200) / 2, y: (viewport?.height ?? 500) / 2 },
+        15
+      )
     })
   })
 

e2e/playwright/sketch-tests.spec.ts

@@ -113,8 +113,7 @@ test.describe('Sketch tests', { tag: ['@skipWin'] }, () => {
     await page.addInitScript(async () => {
       localStorage.setItem(
         'persistCode',
-        `@settings(defaultLengthUnit = in)
+        `sketch001 = startSketchOn(XZ)
-sketch001 = startSketchOn(XZ)
   |> startProfileAt([2.61, -4.01], %)
   |> xLine(length = 8.73)
   |> tangentialArcTo([8.33, -1.31], %)`
@@ -160,10 +159,7 @@ sketch001 = startSketchOn(XZ)
       await page.mouse.click(700, 200)
 
       await expect.poll(u.normalisedEditorCode, { timeout: 1000 })
-        .toBe(`@settings(defaultLengthUnit = in)
+        .toBe(`sketch002 = startSketchOn(XZ)
-
-
-sketch002 = startSketchOn(XZ)
 sketch001 = startProfileAt([12.34, -12.34], sketch002)
   |> yLine(length = 12.34)
 
@@ -793,8 +789,7 @@ sketch001 = startProfileAt([12.34, -12.34], sketch002)
       200
     )
 
-    let codeStr =
+    let codeStr = 'sketch001 = startSketchOn(XY)'
-      '@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XY)'
 
     await page.mouse.click(center.x, viewportSize.height * 0.55)
     await expect(u.codeLocator).toHaveText(codeStr)
@@ -1431,8 +1426,7 @@ test.describe(`Sketching with offset planes`, () => {
     await context.addInitScript(() => {
       localStorage.setItem(
         'persistCode',
-        `@settings(defaultLengthUnit = in)
+        `offsetPlane001 = offsetPlane(XY, offset = 10)`
-offsetPlane001 = offsetPlane(XY, offset = 10)`
       )
     })
 
@@ -1446,7 +1440,7 @@ offsetPlane001 = offsetPlane(XY, offset = 10)`
       await test.step(`Hovering should highlight code`, async () => {
         await planeHover()
         await editor.expectState({
-          activeLines: [`@settings(defaultLengthUnit = in)`],
+          activeLines: [`offsetPlane001=offsetPlane(XY,offset=10)`],
           diagnostics: [],
           highlightedCode: 'offsetPlane(XY, offset = 10)',
         })
@@ -1459,7 +1453,7 @@ offsetPlane001 = offsetPlane(XY, offset = 10)`
         await expect(toolbar.lineBtn).toBeEnabled()
         await editor.expectEditor.toContain('startSketchOn(offsetPlane001)')
         await editor.expectState({
-          activeLines: [`@settings(defaultLengthUnit = in)`],
+          activeLines: [`offsetPlane001=offsetPlane(XY,offset=10)`],
           diagnostics: [],
           highlightedCode: '',
         })
@@ -2492,11 +2486,7 @@ extrude001 = extrude(profile003, length = 5)
     page,
   }) => {
     await page.addInitScript(async () => {
-      localStorage.setItem(
+      localStorage.setItem('persistCode', `myVar = 5`)
-        'persistCode',
-        `@settings(defaultLengthUnit = in)
-        myVar = 5`
-      )
     })
 
     await page.setBodyDimensions({ width: 1000, height: 500 })

e2e/playwright/snapshots/prompt-to-edit/prompt-to-edit-snapshot-tests-spec-ts--edit-with-ai-example-snapshots--change-colour.snap.json

@@ -29,5 +29,5 @@
       }
     }
   ],
-  "kcl_version": "0.2.52"
+  "kcl_version": "0.2.53"
 }

e2e/playwright/test-utils.test.ts

@@ -0,0 +1,96 @@
+import {
+  runningOnLinux,
+  runningOnMac,
+  runningOnWindows,
+  orRunWhenFullSuiteEnabled,
+} from './test-utils'
+
+describe('platform detection utilities', () => {
+  const originalPlatform = process.platform
+
+  afterAll(() => {
+    Object.defineProperty(process, 'platform', {
+      value: originalPlatform,
+    })
+  })
+
+  describe('runningOnLinux', () => {
+    it('returns true on Linux', () => {
+      Object.defineProperty(process, 'platform', {
+        value: 'linux',
+      })
+      expect(runningOnLinux()).toBe(true)
+    })
+
+    it('returns false on other platforms', () => {
+      Object.defineProperty(process, 'platform', {
+        value: 'darwin',
+      })
+      expect(runningOnLinux()).toBe(false)
+    })
+  })
+
+  describe('runningOnMac', () => {
+    it('returns true on Mac', () => {
+      Object.defineProperty(process, 'platform', {
+        value: 'darwin',
+      })
+      expect(runningOnMac()).toBe(true)
+    })
+
+    it('returns false on other platforms', () => {
+      Object.defineProperty(process, 'platform', {
+        value: 'linux',
+      })
+      expect(runningOnMac()).toBe(false)
+    })
+  })
+
+  describe('runningOnWindows', () => {
+    it('returns true on Windows', () => {
+      Object.defineProperty(process, 'platform', {
+        value: 'win32',
+      })
+      expect(runningOnWindows()).toBe(true)
+    })
+
+    it('returns false on other platforms', () => {
+      Object.defineProperty(process, 'platform', {
+        value: 'linux',
+      })
+      expect(runningOnWindows()).toBe(false)
+    })
+  })
+})
+
+describe('utility to bypass unreliable tests', () => {
+  const originalEnv = { ...process.env }
+
+  afterAll(() => {
+    process.env = { ...originalEnv }
+  })
+  it('always runs them on dedicated branch', () => {
+    process.env.GITHUB_EVENT_NAME = 'push'
+    process.env.GITHUB_REF = 'refs/heads/all-e2e'
+    process.env.GITHUB_HEAD_REF = ''
+    process.env.GITHUB_BASE_REF = ''
+    const condition = orRunWhenFullSuiteEnabled()
+    expect(condition).toBe(false)
+  })
+  it('skips them on the main branch', () => {
+    process.env.GITHUB_EVENT_NAME = 'push'
+    process.env.GITHUB_REF = 'refs/heads/main'
+    process.env.GITHUB_HEAD_REF = ''
+    process.env.GITHUB_BASE_REF = ''
+    const condition = orRunWhenFullSuiteEnabled()
+    expect(condition).toBe(true)
+  })
+  it('skips them on pull requests', () => {
+    process.env.GITHUB_EVENT_NAME = 'pull_request'
+    process.env.GITHUB_REF = 'refs/pull/5883/merge'
+    process.env.GITHUB_HEAD_REF = 'my-branch'
+    process.env.GITHUB_BASE_REF = 'main'
+    const condition = orRunWhenFullSuiteEnabled()
+    expect(condition).toBe(true)
+  })
+})

e2e/playwright/test-utils.ts

@@ -55,8 +55,21 @@ export const commonPoints = {
 export const editorSelector = '[role="textbox"][data-language="kcl"]'
 type PaneId = 'variables' | 'code' | 'files' | 'logs'
 
+export function runningOnLinux() {
+  return process.platform === 'linux'
+}
+
+export function runningOnMac() {
+  return process.platform === 'darwin'
+}
+
+export function runningOnWindows() {
+  return process.platform === 'win32'
+}
+
 export function orRunWhenFullSuiteEnabled() {
-  return process.env.GITHUB_HEAD_REF !== 'all-e2e'
+  const branch = process.env.GITHUB_REF?.replace('refs/heads/', '')
+  return branch !== 'all-e2e'
 }
 
 async function waitForPageLoadWithRetry(page: Page) {

e2e/playwright/testing-constraints.spec.ts

@@ -4,6 +4,7 @@ import {
   getUtils,
   TEST_COLORS,
   pollEditorLinesSelectedLength,
+  executorInputPath,
   orRunWhenFullSuiteEnabled,
 } from './test-utils'
 import { XOR } from 'lib/utils'
@@ -1116,19 +1117,9 @@ test.describe('Electron constraint tests', () => {
       await context.folderSetupFn(async (dir) => {
         const bracketDir = path.join(dir, 'test-sample')
         await fsp.mkdir(bracketDir, { recursive: true })
-        await fsp.writeFile(
+        await fsp.copyFile(
-          path.join(bracketDir, 'main.kcl'),
+          executorInputPath('angled_line.kcl'),
-          `@settings(defaultLengthUnit = in)
+          path.join(bracketDir, 'main.kcl')
-          const part001 = startSketchOn(XY)
-            |> startProfileAt([4.83, 12.56], %)
-            |> line(end = [15.1, 2.48])
-            |> line(end = [3.15, -9.85], tag = $seg01)
-            |> line(end = [-15.17, -4.1])
-            |> angledLine([segAng(seg01), 12.35], %)
-            |> line(end = [-13.02, 10.03])
-            |> close()
-            |> extrude(length = 4)`,
-          'utf-8'
         )
       })
 

e2e/playwright/testing-gizmo.spec.ts

@@ -255,7 +255,7 @@ test.describe(`Testing gizmo, fixture-based`, () => {
     await context.addInitScript(() => {
       localStorage.setItem(
         'persistCode',
-        `@settings(defaultLengthUnit = in)
+        `
         const sketch002 = startSketchOn(XZ)
           |> startProfileAt([-108.83, -57.48], %)
           |> angledLine([0, 105.13], %, $rectangleSegmentA001)

e2e/playwright/testing-settings.spec.ts

@@ -271,7 +271,7 @@ test.describe('Testing settings', () => {
           const bracketDir = join(dir, projectName)
           await fsp.mkdir(bracketDir, { recursive: true })
           await fsp.copyFile(
-            executorInputPath('cylinder-inches.kcl'),
+            executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
             join(bracketDir, 'main.kcl')
           )
         }
@@ -746,6 +746,7 @@ test.describe('Testing settings', () => {
     })
     await page.setBodyDimensions({ width: 1200, height: 500 })
     await homePage.goToModelingScene()
+    await expect(toolbar.startSketchBtn).toBeEnabled({ timeout: 15_000 })
     await scene.settled(cmdBar)
     await page.waitForTimeout(1000)
 
@@ -950,9 +951,9 @@ test.describe('Testing settings', () => {
       )
     })
 
-    await test.step(`Initial units from settings are ignored`, async () => {
+    await test.step(`Initial units from settings`, async () => {
       await homePage.openProject('project-000')
-      await expect(unitsIndicator).toHaveText('Current units are: mm')
+      await expect(unitsIndicator).toHaveText('Current units are: in')
     })
 
     await test.step(`Manually write inline settings`, async () => {

e2e/playwright/various.spec.ts

@@ -483,8 +483,7 @@ test('Sketch on face', async ({ page, homePage, scene, cmdBar, toolbar }) => {
   await page.addInitScript(async () => {
     localStorage.setItem(
       'persistCode',
-      `@settings(defaultLengthUnit = in)
+      `sketch001 = startSketchOn(XZ)
-sketch001 = startSketchOn(XZ)
 |> startProfileAt([3.29, 7.86], %)
 |> line(end = [2.48, 2.44])
 |> line(end = [2.66, 1.17])

interface.d.ts

@@ -44,6 +44,9 @@ export interface IElectronAPI {
   rm: typeof fs.rm
   stat: (path: string) => ReturnType<fs.stat>
   statIsDirectory: (path: string) => Promise<boolean>
+  canReadWriteDirectory: (
+    path: string
+  ) => Promise<{ value: boolean; error: unknown }>
   path: typeof path
   mkdir: typeof fs.mkdir
   join: typeof path.join

packages/codemirror-lang-kcl/src/kcl.grammar

@@ -75,17 +75,14 @@ LabeledArgument { ArgumentLabel Equals expression }
 ArgumentList { "(" commaSep<LabeledArgument | expression> ")" }
 
 type[@isGroup=Type] {
-  @specialize[@name=PrimitiveType]<
+  PrimitiveType { identifier } |
-    identifier,
-    "bool" | "number" | "string" | "tag" | "Sketch" | "SketchSurface" | "Solid" | "Plane"
-  > |
   ArrayType { "[" type !member (";" Number "+"?)? "]" } |
   ObjectType { "{" commaSep<ObjectProperty { PropertyName ":" type }> "}" }
 }
 
 VariableDefinition { identifier }
 
-VariableName { identifier }
+VariableName { identifier ("::" identifier)*}
 
 ArgumentLabel { identifier }
 
@@ -137,7 +134,7 @@ commaSep1NoTrailingComma<term> { term ("," term)* }
   "(" ")"
   "{" "}"
   "[" "]"
-  "," "?" ":" "." ".." ";"
+  "," "?" ":" "." ".." ";" "::"
 }
 
 @external propSource kclHighlight from "./highlight"

packages/codemirror-lang-kcl/vitest.main.config.ts

@@ -18,7 +18,9 @@ const config = defineConfig({
     environment: 'node',
     reporters: process.env.GITHUB_ACTIONS
       ? ['dot', 'github-actions']
-      : ['verbose', 'hanging-process'],
+      : // Gotcha: 'hanging-process' is very noisey, turn off by default on localhost
+        // : ['verbose', 'hanging-process'],
+        ['verbose'],
     testTimeout: 1000,
     hookTimeout: 1000,
     teardownTimeout: 1000,

packages/codemirror-lsp-client/package.json

@@ -29,7 +29,7 @@
     "vscode-uri": "^3.1.0"
   },
   "devDependencies": {
-    "@types/node": "^22.13.10",
+    "@types/node": "^22.13.13",
     "ts-node": "^10.9.2"
   }
 }

packages/codemirror-lsp-client/yarn.lock

@@ -116,10 +116,10 @@
   resolved "https://registry.yarnpkg.com/@tsconfig/node16/-/node16-1.0.4.tgz#0b92dcc0cc1c81f6f306a381f28e31b1a56536e9"
   integrity sha512-vxhUy4J8lyeyinH7Azl1pdd43GJhZH/tP2weN8TntQblOY+A0XbT8DJk1/oCPuOOyg/Ja757rG0CgHcWC8OfMA==
 
-"@types/node@^22.13.10":
+"@types/node@^22.13.13":
-  version "22.13.10"
+  version "22.13.13"
-  resolved "https://registry.yarnpkg.com/@types/node/-/node-22.13.10.tgz#df9ea358c5ed991266becc3109dc2dc9125d77e4"
+  resolved "https://registry.yarnpkg.com/@types/node/-/node-22.13.13.tgz#5e7d110fb509b0d4a43fbf48fa9d6e0f83e1b1e7"
-  integrity sha512-I6LPUvlRH+O6VRUqYOcMudhaIdUVWfsjnZavnsraHvpBwaEyMN29ry+0UVJhImYL16xsscu0aske3yA+uPOWfw==
+  integrity sha512-ClsL5nMwKaBRwPcCvH8E7+nU4GxHVx1axNvMZTFHMEfNI7oahimt26P5zjVCRrjiIWj6YFXfE1v3dEp94wLcGQ==
   dependencies:
     undici-types "~6.20.0"
 

playwright.config.ts

@@ -12,6 +12,7 @@ import { defineConfig, devices } from '@playwright/test'
 export default defineConfig({
   timeout: 120_000, // override the default 30s timeout
   testDir: './e2e/playwright',
+  testIgnore: '*.test.ts', // ignore unit tests
   /* Run tests in files in parallel */
   fullyParallel: true,
   /* Fail the build on CI if you accidentally left test.only in the source code. */

rust/Cargo.lock

@@ -1780,7 +1780,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-bumper"
-version = "0.1.52"
+version = "0.1.54"
 dependencies = [
  "anyhow",
  "clap",
@@ -1791,7 +1791,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-derive-docs"
-version = "0.1.52"
+version = "0.1.54"
 dependencies = [
  "Inflector",
  "anyhow",
@@ -1810,7 +1810,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-directory-test-macro"
-version = "0.1.52"
+version = "0.1.54"
 dependencies = [
  "proc-macro2",
  "quote",
@@ -1819,7 +1819,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-language-server"
-version = "0.2.52"
+version = "0.2.54"
 dependencies = [
  "anyhow",
  "clap",
@@ -1840,7 +1840,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-language-server-release"
-version = "0.1.52"
+version = "0.1.54"
 dependencies = [
  "anyhow",
  "clap",
@@ -1860,7 +1860,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-lib"
-version = "0.2.52"
+version = "0.2.54"
 dependencies = [
  "anyhow",
  "approx 0.5.1",
@@ -1928,7 +1928,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-python-bindings"
-version = "0.3.52"
+version = "0.3.54"
 dependencies = [
  "anyhow",
  "kcl-lib",
@@ -1943,7 +1943,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-test-server"
-version = "0.1.52"
+version = "0.1.54"
 dependencies = [
  "anyhow",
  "hyper 0.14.32",
@@ -1956,7 +1956,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-to-core"
-version = "0.1.52"
+version = "0.1.54"
 dependencies = [
  "anyhow",
  "async-trait",
@@ -1970,7 +1970,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-wasm-lib"
-version = "0.1.52"
+version = "0.1.54"
 dependencies = [
  "bson",
  "console_error_panic_hook",

rust/kcl-bumper/Cargo.toml

@@ -1,7 +1,7 @@
 
 [package]
 name = "kcl-bumper"
-version = "0.1.52"
+version = "0.1.54"
 edition = "2021"
 repository = "https://github.com/KittyCAD/modeling-api"
 rust-version = "1.76"

rust/kcl-derive-docs/Cargo.toml

@@ -1,7 +1,7 @@
 [package]
 name = "kcl-derive-docs"
 description = "A tool for generating documentation from Rust derive macros"
-version = "0.1.52"
+version = "0.1.54"
 edition = "2021"
 license = "MIT"
 repository = "https://github.com/KittyCAD/modeling-app"

rust/kcl-derive-docs/src/lib.rs

@@ -816,7 +816,7 @@ fn generate_code_block_test(fn_name: &str, code_block: &str, index: usize) -> pr
         async fn #test_name() -> miette::Result<()> {
             let code = #code_block;
             // Note, `crate` must be kcl_lib
-            let result = match crate::test_server::execute_and_snapshot(code, None).await {
+            let result = match crate::test_server::execute_and_snapshot(code, crate::settings::types::UnitLength::Mm, None).await {
                 Err(crate::errors::ExecError::Kcl(e)) => {
                     return Err(miette::Report::new(crate::errors::Report {
                         error: e.error,

rust/kcl-derive-docs/tests/args_with_lifetime.gen

@@ -31,7 +31,13 @@ mod test_examples_someFn {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_someFn0() -> miette::Result<()> {
         let code = "someFn()";
-        let result = match crate::test_server::execute_and_snapshot(code, None).await {
+        let result = match crate::test_server::execute_and_snapshot(
+            code,
+            crate::settings::types::UnitLength::Mm,
+            None,
+        )
+        .await
+        {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,

rust/kcl-derive-docs/tests/args_with_refs.gen

@@ -31,7 +31,13 @@ mod test_examples_someFn {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_someFn0() -> miette::Result<()> {
         let code = "someFn()";
-        let result = match crate::test_server::execute_and_snapshot(code, None).await {
+        let result = match crate::test_server::execute_and_snapshot(
+            code,
+            crate::settings::types::UnitLength::Mm,
+            None,
+        )
+        .await
+        {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,

rust/kcl-derive-docs/tests/array.gen

@@ -32,7 +32,13 @@ mod test_examples_show {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_show0() -> miette::Result<()> {
         let code = "This is another code block.\nyes sirrr.\nshow";
-        let result = match crate::test_server::execute_and_snapshot(code, None).await {
+        let result = match crate::test_server::execute_and_snapshot(
+            code,
+            crate::settings::types::UnitLength::Mm,
+            None,
+        )
+        .await
+        {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,

rust/kcl-derive-docs/tests/box.gen

@@ -32,7 +32,13 @@ mod test_examples_show {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_show0() -> miette::Result<()> {
         let code = "This is code.\nIt does other shit.\nshow";
-        let result = match crate::test_server::execute_and_snapshot(code, None).await {
+        let result = match crate::test_server::execute_and_snapshot(
+            code,
+            crate::settings::types::UnitLength::Mm,
+            None,
+        )
+        .await
+        {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,

rust/kcl-derive-docs/tests/doc_comment_with_code.gen

@@ -33,7 +33,13 @@ mod test_examples_my_func {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_my_func0() -> miette::Result<()> {
         let code = "This is another code block.\nyes sirrr.\nmyFunc";
-        let result = match crate::test_server::execute_and_snapshot(code, None).await {
+        let result = match crate::test_server::execute_and_snapshot(
+            code,
+            crate::settings::types::UnitLength::Mm,
+            None,
+        )
+        .await
+        {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,

rust/kcl-derive-docs/tests/lineTo.gen

@@ -33,7 +33,13 @@ mod test_examples_line_to {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_line_to0() -> miette::Result<()> {
         let code = "This is another code block.\nyes sirrr.\nlineTo";
-        let result = match crate::test_server::execute_and_snapshot(code, None).await {
+        let result = match crate::test_server::execute_and_snapshot(
+            code,
+            crate::settings::types::UnitLength::Mm,
+            None,
+        )
+        .await
+        {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,

rust/kcl-derive-docs/tests/min.gen

@@ -32,7 +32,13 @@ mod test_examples_min {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_min0() -> miette::Result<()> {
         let code = "This is another code block.\nyes sirrr.\nmin";
-        let result = match crate::test_server::execute_and_snapshot(code, None).await {
+        let result = match crate::test_server::execute_and_snapshot(
+            code,
+            crate::settings::types::UnitLength::Mm,
+            None,
+        )
+        .await
+        {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,

rust/kcl-derive-docs/tests/option.gen

@@ -32,7 +32,13 @@ mod test_examples_show {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_show0() -> miette::Result<()> {
         let code = "This is code.\nIt does other shit.\nshow";
-        let result = match crate::test_server::execute_and_snapshot(code, None).await {
+        let result = match crate::test_server::execute_and_snapshot(
+            code,
+            crate::settings::types::UnitLength::Mm,
+            None,
+        )
+        .await
+        {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,

rust/kcl-derive-docs/tests/option_input_format.gen

@@ -32,7 +32,13 @@ mod test_examples_import {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_import0() -> miette::Result<()> {
         let code = "This is code.\nIt does other shit.\nimport";
-        let result = match crate::test_server::execute_and_snapshot(code, None).await {
+        let result = match crate::test_server::execute_and_snapshot(
+            code,
+            crate::settings::types::UnitLength::Mm,
+            None,
+        )
+        .await
+        {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,

rust/kcl-derive-docs/tests/return_vec_box_sketch.gen

@@ -32,7 +32,13 @@ mod test_examples_import {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_import0() -> miette::Result<()> {
         let code = "This is code.\nIt does other shit.\nimport";
-        let result = match crate::test_server::execute_and_snapshot(code, None).await {
+        let result = match crate::test_server::execute_and_snapshot(
+            code,
+            crate::settings::types::UnitLength::Mm,
+            None,
+        )
+        .await
+        {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,

rust/kcl-derive-docs/tests/return_vec_sketch.gen

@@ -32,7 +32,13 @@ mod test_examples_import {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_import0() -> miette::Result<()> {
         let code = "This is code.\nIt does other shit.\nimport";
-        let result = match crate::test_server::execute_and_snapshot(code, None).await {
+        let result = match crate::test_server::execute_and_snapshot(
+            code,
+            crate::settings::types::UnitLength::Mm,
+            None,
+        )
+        .await
+        {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,

rust/kcl-derive-docs/tests/show.gen

@@ -32,7 +32,13 @@ mod test_examples_show {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_show0() -> miette::Result<()> {
         let code = "This is code.\nIt does other shit.\nshow";
-        let result = match crate::test_server::execute_and_snapshot(code, None).await {
+        let result = match crate::test_server::execute_and_snapshot(
+            code,
+            crate::settings::types::UnitLength::Mm,
+            None,
+        )
+        .await
+        {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,

rust/kcl-derive-docs/tests/test_args_with_exec_state.gen

@@ -31,7 +31,13 @@ mod test_examples_some_function {
     #[tokio::test(flavor = "multi_thread", worker_threads = 5)]
     async fn kcl_test_example_some_function0() -> miette::Result<()> {
         let code = "someFunction()";
-        let result = match crate::test_server::execute_and_snapshot(code, None).await {
+        let result = match crate::test_server::execute_and_snapshot(
+            code,
+            crate::settings::types::UnitLength::Mm,
+            None,
+        )
+        .await
+        {
             Err(crate::errors::ExecError::Kcl(e)) => {
                 return Err(miette::Report::new(crate::errors::Report {
                     error: e.error,

rust/kcl-directory-test-macro/Cargo.toml

@@ -1,7 +1,7 @@
 [package]
 name = "kcl-directory-test-macro"
 description = "A tool for generating tests from a directory of kcl files"
-version = "0.1.52"
+version = "0.1.54"
 edition = "2021"
 license = "MIT"
 repository = "https://github.com/KittyCAD/modeling-app"

rust/kcl-language-server-release/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "kcl-language-server-release"
-version = "0.1.52"
+version = "0.1.54"
 edition = "2021"
 authors = ["KittyCAD Inc <kcl@kittycad.io>"]
 publish = false

rust/kcl-language-server/Cargo.toml

@@ -2,7 +2,7 @@
 name = "kcl-language-server"
 description = "A language server for KCL."
 authors = ["KittyCAD Inc <kcl@kittycad.io>"]
-version = "0.2.52"
+version = "0.2.54"
 edition = "2021"
 license = "MIT"
 # See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html

rust/kcl-language-server/package.json

@@ -135,13 +135,13 @@
     "@types/mocha": "^10.0.10",
     "@types/node": "^22.13.10",
     "@types/vscode": "^1.97.0",
-    "@typescript-eslint/eslint-plugin": "^6.6.0",
+    "@typescript-eslint/eslint-plugin": "^8.27.0",
-    "@typescript-eslint/parser": "^6.6.0",
+    "@typescript-eslint/parser": "^8.27.0",
     "@vscode/test-electron": "^2.4.1",
-    "@vscode/vsce": "^2.30.0",
+    "@vscode/vsce": "^3.3.0",
     "cross-env": "^7.0.3",
     "esbuild": "^0.25.1",
-    "glob": "^10.4.3",
+    "glob": "^11.0.1",
     "mocha": "^11.1.0",
     "typescript": "^5.8.2"
   },

rust/kcl-language-server/yarn.lock

@@ -252,7 +252,7 @@
   dependencies:
     eslint-visitor-keys "^3.4.3"
 
-"@eslint-community/regexpp@^4.5.1":
+"@eslint-community/regexpp@^4.10.0":
   version "4.12.1"
   resolved "https://registry.yarnpkg.com/@eslint-community/regexpp/-/regexpp-4.12.1.tgz#cfc6cffe39df390a3841cde2abccf92eaa7ae0e0"
   integrity sha512-CCZCDJuduB9OUkFkY2IgppNZMi2lBQgD2qzwXkEia16cge2pijY/aXi96CJMquDMn3nJdlPV1A5KrJEXwfLNzQ==
@@ -308,11 +308,6 @@
     "@types/minimatch" "^5.1.2"
     "@types/node" "*"
 
-"@types/json-schema@^7.0.12":
-  version "7.0.15"
-  resolved "https://registry.yarnpkg.com/@types/json-schema/-/json-schema-7.0.15.tgz#596a1747233694d50f6ad8a7869fcb6f56cf5841"
-  integrity sha512-5+fP8P8MFNC+AyZCDxrB2pkZFPGzqQWUzpSeuuVLvm8VMcorNYavBqoFcxK8bQz4Qsbn4oUEEem4wDLfcysGHA==
-
 "@types/minimatch@^5.1.2":
   version "5.1.2"
   resolved "https://registry.yarnpkg.com/@types/minimatch/-/minimatch-5.1.2.tgz#07508b45797cb81ec3f273011b054cd0755eddca"
@@ -330,101 +325,91 @@
   dependencies:
     undici-types "~6.20.0"
 
-"@types/semver@^7.5.0":
-  version "7.5.8"
-  resolved "https://registry.yarnpkg.com/@types/semver/-/semver-7.5.8.tgz#8268a8c57a3e4abd25c165ecd36237db7948a55e"
-  integrity sha512-I8EUhyrgfLrcTkzV3TSsGyl1tSuPrEDzr0yd5m90UgNxQkyDXULk3b6MlQqTCpZpNtWe1K0hzclnZkTcLBe2UQ==
-
 "@types/vscode@^1.97.0":
   version "1.97.0"
   resolved "https://registry.yarnpkg.com/@types/vscode/-/vscode-1.97.0.tgz#62ce3a32243019aaa4fc20cee2a3de06bc71af4f"
   integrity sha512-ueE73loeOTe7olaVyqP9mrRI54kVPJifUPjblZo9fYcv1CuVLPOEKEkqW0GkqPC454+nCEoigLWnC2Pp7prZ9w==
 
-"@typescript-eslint/eslint-plugin@^6.6.0":
+"@typescript-eslint/eslint-plugin@^8.27.0":
-  version "6.21.0"
+  version "8.27.0"
-  resolved "https://registry.yarnpkg.com/@typescript-eslint/eslint-plugin/-/eslint-plugin-6.21.0.tgz#30830c1ca81fd5f3c2714e524c4303e0194f9cd3"
+  resolved "https://registry.yarnpkg.com/@typescript-eslint/eslint-plugin/-/eslint-plugin-8.27.0.tgz#fbef10802365832ee1d1bd5d2117dcec82727a72"
-  integrity sha512-oy9+hTPCUFpngkEZUSzbf9MxI65wbKFoQYsgPdILTfbUldp5ovUuphZVe4i30emU9M/kP+T64Di0mxl7dSw3MA==
+  integrity sha512-4henw4zkePi5p252c8ncBLzLce52SEUz2Ebj8faDnuUXz2UuHEONYcJ+G0oaCF+bYCWVZtrGzq3FD7YXetmnSA==
   dependencies:
-    "@eslint-community/regexpp" "^4.5.1"
+    "@eslint-community/regexpp" "^4.10.0"
-    "@typescript-eslint/scope-manager" "6.21.0"
+    "@typescript-eslint/scope-manager" "8.27.0"
-    "@typescript-eslint/type-utils" "6.21.0"
+    "@typescript-eslint/type-utils" "8.27.0"
-    "@typescript-eslint/utils" "6.21.0"
+    "@typescript-eslint/utils" "8.27.0"
-    "@typescript-eslint/visitor-keys" "6.21.0"
+    "@typescript-eslint/visitor-keys" "8.27.0"
-    debug "^4.3.4"
     graphemer "^1.4.0"
-    ignore "^5.2.4"
+    ignore "^5.3.1"
     natural-compare "^1.4.0"
-    semver "^7.5.4"
+    ts-api-utils "^2.0.1"
-    ts-api-utils "^1.0.1"
 
-"@typescript-eslint/parser@^6.6.0":
+"@typescript-eslint/parser@^8.27.0":
-  version "6.21.0"
+  version "8.27.0"
-  resolved "https://registry.yarnpkg.com/@typescript-eslint/parser/-/parser-6.21.0.tgz#af8fcf66feee2edc86bc5d1cf45e33b0630bf35b"
+  resolved "https://registry.yarnpkg.com/@typescript-eslint/parser/-/parser-8.27.0.tgz#3f6beaa83934467eda34ae82ef04090014df8227"
-  integrity sha512-tbsV1jPne5CkFQCgPBcDOt30ItF7aJoZL997JSF7MhGQqOeT3svWRYxiqlfA5RUdlHN6Fi+EI9bxqbdyAUZjYQ==
+  integrity sha512-XGwIabPallYipmcOk45DpsBSgLC64A0yvdAkrwEzwZ2viqGqRUJ8eEYoPz0CWnutgAFbNMPdsGGvzjSmcWVlEA==
   dependencies:
-    "@typescript-eslint/scope-manager" "6.21.0"
+    "@typescript-eslint/scope-manager" "8.27.0"
-    "@typescript-eslint/types" "6.21.0"
+    "@typescript-eslint/types" "8.27.0"
-    "@typescript-eslint/typescript-estree" "6.21.0"
+    "@typescript-eslint/typescript-estree" "8.27.0"
-    "@typescript-eslint/visitor-keys" "6.21.0"
+    "@typescript-eslint/visitor-keys" "8.27.0"
     debug "^4.3.4"
 
-"@typescript-eslint/scope-manager@6.21.0":
+"@typescript-eslint/scope-manager@8.27.0":
-  version "6.21.0"
+  version "8.27.0"
-  resolved "https://registry.yarnpkg.com/@typescript-eslint/scope-manager/-/scope-manager-6.21.0.tgz#ea8a9bfc8f1504a6ac5d59a6df308d3a0630a2b1"
+  resolved "https://registry.yarnpkg.com/@typescript-eslint/scope-manager/-/scope-manager-8.27.0.tgz#b51042927067d677fbfc471605cf40d1ffaee482"
-  integrity sha512-OwLUIWZJry80O99zvqXVEioyniJMa+d2GrqpUTqi5/v5D5rOrppJVBPa0yKCblcigC0/aYAzxxqQ1B+DS2RYsg==
+  integrity sha512-8oI9GwPMQmBryaaxG1tOZdxXVeMDte6NyJA4i7/TWa4fBwgnAXYlIQP+uYOeqAaLJ2JRxlG9CAyL+C+YE9Xknw==
   dependencies:
-    "@typescript-eslint/types" "6.21.0"
+    "@typescript-eslint/types" "8.27.0"
-    "@typescript-eslint/visitor-keys" "6.21.0"
+    "@typescript-eslint/visitor-keys" "8.27.0"
 
-"@typescript-eslint/type-utils@6.21.0":
+"@typescript-eslint/type-utils@8.27.0":
-  version "6.21.0"
+  version "8.27.0"
-  resolved "https://registry.yarnpkg.com/@typescript-eslint/type-utils/-/type-utils-6.21.0.tgz#6473281cfed4dacabe8004e8521cee0bd9d4c01e"
+  resolved "https://registry.yarnpkg.com/@typescript-eslint/type-utils/-/type-utils-8.27.0.tgz#af3c4eefcb64455ee50aae2d7069918467af085c"
-  integrity sha512-rZQI7wHfao8qMX3Rd3xqeYSMCL3SoiSQLBATSiVKARdFGCYSRvmViieZjqc58jKgs8Y8i9YvVVhRbHSTA4VBag==
+  integrity sha512-wVArTVcz1oJOIEJxui/nRhV0TXzD/zMSOYi/ggCfNq78EIszddXcJb7r4RCp/oBrjt8n9A0BSxRMKxHftpDxDA==
   dependencies:
-    "@typescript-eslint/typescript-estree" "6.21.0"
+    "@typescript-eslint/typescript-estree" "8.27.0"
-    "@typescript-eslint/utils" "6.21.0"
+    "@typescript-eslint/utils" "8.27.0"
     debug "^4.3.4"
-    ts-api-utils "^1.0.1"
+    ts-api-utils "^2.0.1"
 
-"@typescript-eslint/types@6.21.0":
+"@typescript-eslint/types@8.27.0":
-  version "6.21.0"
+  version "8.27.0"
-  resolved "https://registry.yarnpkg.com/@typescript-eslint/types/-/types-6.21.0.tgz#205724c5123a8fef7ecd195075fa6e85bac3436d"
+  resolved "https://registry.yarnpkg.com/@typescript-eslint/types/-/types-8.27.0.tgz#3dd01ced4c81e798d1106fda0904f8d5c91051aa"
-  integrity sha512-1kFmZ1rOm5epu9NZEZm1kckCDGj5UJEf7P1kliH4LKu/RkwpsfqqGmY2OOcUs18lSlQBKLDYBOGxRVtrMN5lpg==
+  integrity sha512-/6cp9yL72yUHAYq9g6DsAU+vVfvQmd1a8KyA81uvfDE21O2DwQ/qxlM4AR8TSdAu+kJLBDrEHKC5/W2/nxsY0A==
 
-"@typescript-eslint/typescript-estree@6.21.0":
+"@typescript-eslint/typescript-estree@8.27.0":
-  version "6.21.0"
+  version "8.27.0"
-  resolved "https://registry.yarnpkg.com/@typescript-eslint/typescript-estree/-/typescript-estree-6.21.0.tgz#c47ae7901db3b8bddc3ecd73daff2d0895688c46"
+  resolved "https://registry.yarnpkg.com/@typescript-eslint/typescript-estree/-/typescript-estree-8.27.0.tgz#4e02a1056454a84418cc9bce7c00b1c08b03567a"
-  integrity sha512-6npJTkZcO+y2/kr+z0hc4HwNfrrP4kNYh57ek7yCNlrBjWQ1Y0OS7jiZTkgumrvkX5HkEKXFZkkdFNkaW2wmUQ==
+  integrity sha512-BnKq8cqPVoMw71O38a1tEb6iebEgGA80icSxW7g+kndx0o6ot6696HjG7NdgfuAVmVEtwXUr3L8R9ZuVjoQL6A==
   dependencies:
-    "@typescript-eslint/types" "6.21.0"
+    "@typescript-eslint/types" "8.27.0"
-    "@typescript-eslint/visitor-keys" "6.21.0"
+    "@typescript-eslint/visitor-keys" "8.27.0"
     debug "^4.3.4"
-    globby "^11.1.0"
+    fast-glob "^3.3.2"
     is-glob "^4.0.3"
-    minimatch "9.0.3"
+    minimatch "^9.0.4"
-    semver "^7.5.4"
+    semver "^7.6.0"
-    ts-api-utils "^1.0.1"
+    ts-api-utils "^2.0.1"
 
-"@typescript-eslint/utils@6.21.0":
+"@typescript-eslint/utils@8.27.0":
-  version "6.21.0"
+  version "8.27.0"
-  resolved "https://registry.yarnpkg.com/@typescript-eslint/utils/-/utils-6.21.0.tgz#4714e7a6b39e773c1c8e97ec587f520840cd8134"
+  resolved "https://registry.yarnpkg.com/@typescript-eslint/utils/-/utils-8.27.0.tgz#d9c2a4891c6a85b952a9d5f9656c379ab111cf6d"
-  integrity sha512-NfWVaC8HP9T8cbKQxHcsJBY5YE1O33+jpMwN45qzWWaPDZgLIbo12toGMWnmhvCpd3sIxkpDw3Wv1B3dYrbDQQ==
+  integrity sha512-njkodcwH1yvmo31YWgRHNb/x1Xhhq4/m81PhtvmRngD8iHPehxffz1SNCO+kwaePhATC+kOa/ggmvPoPza5i0Q==
   dependencies:
     "@eslint-community/eslint-utils" "^4.4.0"
-    "@types/json-schema" "^7.0.12"
+    "@typescript-eslint/scope-manager" "8.27.0"
-    "@types/semver" "^7.5.0"
+    "@typescript-eslint/types" "8.27.0"
-    "@typescript-eslint/scope-manager" "6.21.0"
+    "@typescript-eslint/typescript-estree" "8.27.0"
-    "@typescript-eslint/types" "6.21.0"
-    "@typescript-eslint/typescript-estree" "6.21.0"
-    semver "^7.5.4"
 
-"@typescript-eslint/visitor-keys@6.21.0":
+"@typescript-eslint/visitor-keys@8.27.0":
-  version "6.21.0"
+  version "8.27.0"
-  resolved "https://registry.yarnpkg.com/@typescript-eslint/visitor-keys/-/visitor-keys-6.21.0.tgz#87a99d077aa507e20e238b11d56cc26ade45fe47"
+  resolved "https://registry.yarnpkg.com/@typescript-eslint/visitor-keys/-/visitor-keys-8.27.0.tgz#4a13e9d7ad7e311a07ea1b178b4c9f848ce11334"
-  integrity sha512-JJtkDduxLi9bivAB+cYOVMtbkqdPOhZ+ZI5LC47MIRrDV4Yn2o+ZnW10Nkmr28xRpSpdJ6Sm42Hjf2+REYXm0A==
+  integrity sha512-WsXQwMkILJvffP6z4U3FYJPlbf/j07HIxmDjZpbNvBJkMfvwXj5ACRkkHwBDvLBbDbtX5TdU64/rcvKJ/vuInQ==
   dependencies:
-    "@typescript-eslint/types" "6.21.0"
+    "@typescript-eslint/types" "8.27.0"
-    eslint-visitor-keys "^3.4.1"
+    eslint-visitor-keys "^4.2.0"
 
 "@vscode/test-electron@^2.4.1":
   version "2.4.1"
@@ -497,10 +482,10 @@
     "@vscode/vsce-sign-win32-arm64" "2.0.2"
     "@vscode/vsce-sign-win32-x64" "2.0.2"
 
-"@vscode/vsce@^2.30.0":
+"@vscode/vsce@^3.3.0":
-  version "2.30.0"
+  version "3.3.0"
-  resolved "https://registry.yarnpkg.com/@vscode/vsce/-/vsce-2.30.0.tgz#7a0c16b20ef529fa291fe9d3c7fe51a2a613f773"
+  resolved "https://registry.yarnpkg.com/@vscode/vsce/-/vsce-3.3.0.tgz#803e41368a95d35693ce049076503f34f89fde09"
-  integrity sha512-MBYpXdCY1SCdc2u/y11kmJuSODKFyZRpeRTQq5p4rSg05QSjSy5pz6h/BGLNdSahgXfKRBATEkjAcJFdJuDz8Q==
+  integrity sha512-HA/pUyvh/TQWkc4wG7AudPIWUvsR8i4jiWZZgM/a69ncPi9Nm5FDogf/wVEk4EWJs4/UdxU7J6X18dfAwfPbxA==
   dependencies:
     "@azure/identity" "^4.1.0"
     "@vscode/vsce-sign" "^2.0.0"
@@ -508,19 +493,19 @@
     chalk "^2.4.2"
     cheerio "^1.0.0-rc.9"
     cockatiel "^3.1.2"
-    commander "^6.2.1"
+    commander "^12.1.0"
     form-data "^4.0.0"
-    glob "^7.0.6"
+    glob "^11.0.0"
     hosted-git-info "^4.0.2"
     jsonc-parser "^3.2.0"
     leven "^3.1.0"
-    markdown-it "^12.3.2"
+    markdown-it "^14.1.0"
     mime "^1.3.4"
     minimatch "^3.0.3"
     parse-semver "^1.1.1"
     read "^1.0.7"
     semver "^7.5.2"
-    tmp "^0.2.1"
+    tmp "^0.2.3"
     typed-rest-client "^1.8.4"
     url-join "^4.0.1"
     xml2js "^0.5.0"
@@ -583,11 +568,6 @@ argparse@^2.0.1:
   resolved "https://registry.yarnpkg.com/argparse/-/argparse-2.0.1.tgz#246f50f3ca78a3240f6c997e8a9bd1eac49e4b38"
   integrity sha512-8+9WqebbFzpX9OR+Wa6O29asIogeRMzcGtAINdpMHHyAg10f05aSFVBbcEqGf/PXw1EjAZ+q2/bEBg3DvurK3Q==
 
-array-union@^2.1.0:
-  version "2.1.0"
-  resolved "https://registry.yarnpkg.com/array-union/-/array-union-2.1.0.tgz#b798420adbeb1de828d84acd8a2e23d3efe85e8d"
-  integrity sha512-HGyxoOTYUyCM6stUe6EJgnd4EoewAI7zMdfqO+kGjnlZmBDz/cR5pf8r/cR4Wq60sL/p0IkcjUEEPwS3GFrIyw==
-
 asynckit@^0.4.0:
   version "0.4.0"
   resolved "https://registry.yarnpkg.com/asynckit/-/asynckit-0.4.0.tgz#c79ed97f7f34cb8f2ba1bc9790bcc366474b4b79"
@@ -832,10 +812,10 @@ combined-stream@^1.0.8:
   dependencies:
     delayed-stream "~1.0.0"
 
-commander@^6.2.1:
+commander@^12.1.0:
-  version "6.2.1"
+  version "12.1.0"
-  resolved "https://registry.yarnpkg.com/commander/-/commander-6.2.1.tgz#0792eb682dfbc325999bb2b84fddddba110ac73c"
+  resolved "https://registry.yarnpkg.com/commander/-/commander-12.1.0.tgz#01423b36f501259fdaac4d0e4d60c96c991585d3"
-  integrity sha512-U7VdrJFnJgo4xjrHpTzu0yrHPGImdsmD95ZlgYSEajAn2JKzDhDTPG9kBTefmObL2w/ngeZnilk+OV9CG3d7UA==
+  integrity sha512-Vw8qHK3bZM9y/P10u3Vib8o/DdkvA2OtPtZvD871QKjy74Wj1WSKFILMPRPSdUSx5RFK1arlJzEtA4PkFgnbuA==
 
 concat-map@0.0.1:
   version "0.0.1"
@@ -932,13 +912,6 @@ diff@^5.2.0:
   resolved "https://registry.yarnpkg.com/diff/-/diff-5.2.0.tgz#26ded047cd1179b78b9537d5ef725503ce1ae531"
   integrity sha512-uIFDxqpRZGZ6ThOk84hEfqWoHx2devRFvpTZcTHur85vImfaxUbTW9Ryh4CpCuDnToOP1CEtXKIgytHBPVff5A==
 
-dir-glob@^3.0.1:
-  version "3.0.1"
-  resolved "https://registry.yarnpkg.com/dir-glob/-/dir-glob-3.0.1.tgz#56dbf73d992a4a93ba1584f4534063fd2e41717f"
-  integrity sha512-WkrWp9GR4KXfKGYzOLmTuGVi1UWFfws377n9cc55/tb6DuqyF6pcQ5AbiHEshaDpY9v6oaSr2XCDidGmMwdzIA==
-  dependencies:
-    path-type "^4.0.0"
-
 dom-serializer@^2.0.0:
   version "2.0.0"
   resolved "https://registry.yarnpkg.com/dom-serializer/-/dom-serializer-2.0.0.tgz#e41b802e1eedf9f6cae183ce5e622d789d7d8e53"
@@ -1008,11 +981,6 @@ entities@^4.2.0, entities@^4.4.0:
   resolved "https://registry.yarnpkg.com/entities/-/entities-4.5.0.tgz#5d268ea5e7113ec74c4d033b79ea5a35a488fb48"
   integrity sha512-V0hjH4dGPh9Ao5p0MoRY6BVqtwCjhz6vI5LT8AJ55H+4g9/4vbHx1I54fS0XuclLhDHArPQCiMjDxjaL8fPxhw==
 
-entities@~2.1.0:
-  version "2.1.0"
-  resolved "https://registry.yarnpkg.com/entities/-/entities-2.1.0.tgz#992d3129cf7df6870b96c57858c249a120f8b8b5"
-  integrity sha512-hCx1oky9PFrJ611mf0ifBLBRW8lUUVRlFolb5gWRfIELabBlbp9xZvrqZLZAs+NxFnbfQoeGd8wDkygjg7U85w==
-
 es-define-property@^1.0.0:
   version "1.0.0"
   resolved "https://registry.yarnpkg.com/es-define-property/-/es-define-property-1.0.0.tgz#c7faefbdff8b2696cf5f46921edfb77cc4ba3845"
@@ -1071,11 +1039,16 @@ escape-string-regexp@^4.0.0:
   resolved "https://registry.yarnpkg.com/escape-string-regexp/-/escape-string-regexp-4.0.0.tgz#14ba83a5d373e3d311e5afca29cf5bfad965bf34"
   integrity sha512-TtpcNJ3XAzx3Gq8sWRzJaVajRs0uVxA2YAkdb1jm2YkPz4G6egUFAyA3n5vtEIZefPk5Wa4UXbKuS5fKkJWdgA==
 
-eslint-visitor-keys@^3.4.1, eslint-visitor-keys@^3.4.3:
+eslint-visitor-keys@^3.4.3:
   version "3.4.3"
   resolved "https://registry.yarnpkg.com/eslint-visitor-keys/-/eslint-visitor-keys-3.4.3.tgz#0cd72fe8550e3c2eae156a96a4dddcd1c8ac5800"
   integrity sha512-wpc+LXeiyiisxPlEkUzU6svyS1frIO3Mgxj1fdy7Pm8Ygzguax2N3Fa/D/ag1WqbOprdI+uY6wMUl8/a2G+iag==
 
+eslint-visitor-keys@^4.2.0:
+  version "4.2.0"
+  resolved "https://registry.yarnpkg.com/eslint-visitor-keys/-/eslint-visitor-keys-4.2.0.tgz#687bacb2af884fcdda8a6e7d65c606f46a14cd45"
+  integrity sha512-UyLnSehNt62FFhSwjZlHmeokpRK59rcz29j+F1/aDgbkbRTk7wIc9XzdoasMUbRNKDM0qQt/+BJ4BrpFeABemw==
+
 events@^3.0.0:
   version "3.3.0"
   resolved "https://registry.yarnpkg.com/events/-/events-3.3.0.tgz#31a95ad0a924e2d2c419a813aeb2c4e878ea7400"
@@ -1086,7 +1059,7 @@ expand-template@^2.0.3:
   resolved "https://registry.yarnpkg.com/expand-template/-/expand-template-2.0.3.tgz#6e14b3fcee0f3a6340ecb57d2e8918692052a47c"
   integrity sha512-XYfuKMvj4O35f/pOXLObndIRvyQ+/+6AhODh+OKWj9S9498pHHn/IMszH+gt0fBCRWMNfk1ZSp5x3AifmnI2vg==
 
-fast-glob@^3.2.9:
+fast-glob@^3.3.2:
   version "3.3.3"
   resolved "https://registry.yarnpkg.com/fast-glob/-/fast-glob-3.3.3.tgz#d06d585ce8dba90a16b0505c543c3ccfb3aeb818"
   integrity sha512-7MptL8U0cqcFdzIzwOTHoilX9x5BrNqye7Z/LuC7kCMRio1EMSyqRK3BEAUD7sXRq4iT4AzTVuZdhgQ2TCvYLg==
@@ -1153,11 +1126,6 @@ fs-constants@^1.0.0:
   resolved "https://registry.yarnpkg.com/fs-constants/-/fs-constants-1.0.0.tgz#6be0de9be998ce16af8afc24497b9ee9b7ccd9ad"
   integrity sha512-y6OAwoSIf7FyjMIv94u+b5rdheZEjzR63GTyZJm5qh4Bi+2YgwLCcI/fPFZkL5PSixOt6ZNKm+w+Hfp/Bciwow==
 
-fs.realpath@^1.0.0:
-  version "1.0.0"
-  resolved "https://registry.yarnpkg.com/fs.realpath/-/fs.realpath-1.0.0.tgz#1504ad2523158caa40db4a2787cb01411994ea4f"
-  integrity sha512-OO0pH2lK6a0hZnAdau5ItzHPI6pUlvI7jMVnxUQRtw4owF2wk8lOSabtGDCTP4Ggrg2MbGnWO9X8K1t4+fGMDw==
-
 fsevents@~2.3.2:
   version "2.3.3"
   resolved "https://registry.yarnpkg.com/fsevents/-/fsevents-2.3.3.tgz#cac6407785d03675a2a5e1a5305c697b347d90d6"
@@ -1196,7 +1164,7 @@ glob-parent@^5.1.2, glob-parent@~5.1.2:
   dependencies:
     is-glob "^4.0.1"
 
-glob@^10.4.3, glob@^10.4.5:
+glob@^10.4.5:
   version "10.4.5"
   resolved "https://registry.yarnpkg.com/glob/-/glob-10.4.5.tgz#f4d9f0b90ffdbab09c9d77f5f29b4262517b0956"
   integrity sha512-7Bv8RF0k6xjo7d4A/PxYLbUCfb6c+Vpd2/mB2yRDlew7Jb5hEXiCD9ibfO7wpk8i4sevK6DFny9h7EYbM3/sHg==
@@ -1208,29 +1176,17 @@ glob@^10.4.3, glob@^10.4.5:
     package-json-from-dist "^1.0.0"
     path-scurry "^1.11.1"
 
-glob@^7.0.6:
+glob@^11.0.0, glob@^11.0.1:
-  version "7.2.3"
+  version "11.0.1"
-  resolved "https://registry.yarnpkg.com/glob/-/glob-7.2.3.tgz#b8df0fb802bbfa8e89bd1d938b4e16578ed44f2b"
+  resolved "https://registry.yarnpkg.com/glob/-/glob-11.0.1.tgz#1c3aef9a59d680e611b53dcd24bb8639cef064d9"
-  integrity sha512-nFR0zLpU2YCaRxwoCJvL6UvCH2JFyFVIvwTLsIf21AuHlMskA1hhTdk+LlYJtOlYt9v6dvszD2BGRqBL+iQK9Q==
+  integrity sha512-zrQDm8XPnYEKawJScsnM0QzobJxlT/kHOOlRTio8IH/GrmxRE5fjllkzdaHclIuNjUQTJYH2xHNIGfdpJkDJUw==
   dependencies:
-    fs.realpath "^1.0.0"
+    foreground-child "^3.1.0"
-    inflight "^1.0.4"
+    jackspeak "^4.0.1"
-    inherits "2"
+    minimatch "^10.0.0"
-    minimatch "^3.1.1"
+    minipass "^7.1.2"
-    once "^1.3.0"
+    package-json-from-dist "^1.0.0"
-    path-is-absolute "^1.0.0"
+    path-scurry "^2.0.0"
-
-globby@^11.1.0:
-  version "11.1.0"
-  resolved "https://registry.yarnpkg.com/globby/-/globby-11.1.0.tgz#bd4be98bb042f83d796f7e3811991fbe82a0d34b"
-  integrity sha512-jhIXaOzy1sb8IyocaruWSn1TjmnBVs8Ayhcy83rmxNJ8q2uWKCAj3CnJY+KpGSXCueAPc0i05kVvVKtP1t9S3g==
-  dependencies:
-    array-union "^2.1.0"
-    dir-glob "^3.0.1"
-    fast-glob "^3.2.9"
-    ignore "^5.2.0"
-    merge2 "^1.4.1"
-    slash "^3.0.0"
 
 gopd@^1.0.1:
   version "1.0.1"
@@ -1321,7 +1277,7 @@ ieee754@^1.1.13, ieee754@^1.2.1:
   resolved "https://registry.yarnpkg.com/ieee754/-/ieee754-1.2.1.tgz#8eb7a10a63fff25d15a57b001586d177d1b0d352"
   integrity sha512-dcyqhDvX1C46lXZcVqCpK+FtMRQVdIMN6/Df5js2zouUsqG7I6sFxitIC+7KYK29KdXOLHdu9zL4sFnoVQnqaA==
 
-ignore@^5.2.0, ignore@^5.2.4:
+ignore@^5.3.1:
   version "5.3.2"
   resolved "https://registry.yarnpkg.com/ignore/-/ignore-5.3.2.tgz#3cd40e729f3643fd87cb04e50bf0eb722bc596f5"
   integrity sha512-hsBTNUqQTDwkWtcdYI2i06Y/nUBEsNEDJKjWdigLvegy8kDuJAS8uRlpkkcQpyEXL0Z/pjDy5HBmMjRCJ2gq+g==
@@ -1331,15 +1287,7 @@ immediate@~3.0.5:
   resolved "https://registry.yarnpkg.com/immediate/-/immediate-3.0.6.tgz#9db1dbd0faf8de6fbe0f5dd5e56bb606280de69b"
   integrity sha512-XXOFtyqDjNDAQxVfYxuF7g9Il/IbWmmlQg2MYKOH8ExIT1qg6xc4zyS3HaEEATgs1btfzxq15ciUiY7gjSXRGQ==
 
-inflight@^1.0.4:
+inherits@^2.0.3, inherits@^2.0.4, inherits@~2.0.3:
-  version "1.0.6"
-  resolved "https://registry.yarnpkg.com/inflight/-/inflight-1.0.6.tgz#49bd6331d7d02d0c09bc910a1075ba8165b56df9"
-  integrity sha512-k92I/b08q4wvFscXCLvqfsHCrjrF7yiXsQuIVvVE7N82W3+aqpzuUdBbfhWcy/FZR3/4IgflMgKLOsvPDrGCJA==
-  dependencies:
-    once "^1.3.0"
-    wrappy "1"
-
-inherits@2, inherits@^2.0.3, inherits@^2.0.4, inherits@~2.0.3:
   version "2.0.4"
   resolved "https://registry.yarnpkg.com/inherits/-/inherits-2.0.4.tgz#0fa2c64f932917c3433a0ded55363aae37416b7c"
   integrity sha512-k/vGaX4/Yla3WzyMCvTQOXYeIHvqOKtnqBduzTHpzpQZzAskKMhZ2K+EnBiSM9zGSoIFeMpXKxa4dYeZIQqewQ==
@@ -1429,6 +1377,13 @@ jackspeak@^3.1.2:
   optionalDependencies:
     "@pkgjs/parseargs" "^0.11.0"
 
+jackspeak@^4.0.1:
+  version "4.1.0"
+  resolved "https://registry.yarnpkg.com/jackspeak/-/jackspeak-4.1.0.tgz#c489c079f2b636dc4cbe9b0312a13ff1282e561b"
+  integrity sha512-9DDdhb5j6cpeitCbvLO7n7J4IxnbM6hoF6O1g4HQ5TfhvvKN8ywDM7668ZhMHRqVmxqhps/F6syWK2KcPxYlkw==
+  dependencies:
+    "@isaacs/cliui" "^8.0.2"
+
 js-yaml@^4.1.0:
   version "4.1.0"
   resolved "https://registry.yarnpkg.com/js-yaml/-/js-yaml-4.1.0.tgz#c1fb65f8f5017901cdd2c951864ba18458a10602"
@@ -1521,12 +1476,12 @@ lie@~3.3.0:
   dependencies:
     immediate "~3.0.5"
 
-linkify-it@^3.0.1:
+linkify-it@^5.0.0:
-  version "3.0.3"
+  version "5.0.0"
-  resolved "https://registry.yarnpkg.com/linkify-it/-/linkify-it-3.0.3.tgz#a98baf44ce45a550efb4d49c769d07524cc2fa2e"
+  resolved "https://registry.yarnpkg.com/linkify-it/-/linkify-it-5.0.0.tgz#9ef238bfa6dc70bd8e7f9572b52d369af569b421"
-  integrity sha512-ynTsyrFSdE5oZ/O9GEf00kPngmOfVwazR5GKDq6EYfhlpFug3J2zybX56a2PRRpc9P+FuSoGNAwjlbDs9jJBPQ==
+  integrity sha512-5aHCbzQRADcdP+ATqnDuhhJ/MRIqDkZX5pyjFHRRysS8vZ5AbqGEoFIb6pYHPZ+L/OC2Lc+xT8uHVVR5CAK/wQ==
   dependencies:
-    uc.micro "^1.0.1"
+    uc.micro "^2.0.0"
 
 locate-path@^6.0.0:
   version "6.0.0"
@@ -1591,6 +1546,11 @@ lru-cache@^10.2.0:
   resolved "https://registry.yarnpkg.com/lru-cache/-/lru-cache-10.2.2.tgz#48206bc114c1252940c41b25b41af5b545aca878"
   integrity sha512-9hp3Vp2/hFQUiIwKo8XCeFVnrg8Pk3TYNPIR7tJADKi5YfcF7vEaK7avFHTlSy3kOKYaJQaalfEo6YuXdceBOQ==
 
+lru-cache@^11.0.0:
+  version "11.0.2"
+  resolved "https://registry.yarnpkg.com/lru-cache/-/lru-cache-11.0.2.tgz#fbd8e7cf8211f5e7e5d91905c415a3f55755ca39"
+  integrity sha512-123qHRfJBmo2jXDbo/a5YOQrJoHF/GNQTLzQ5+IdK5pWpceK17yRc6ozlWd25FxvGKQbIUs91fDFkXmDHTKcyA==
+
 lru-cache@^6.0.0:
   version "6.0.0"
   resolved "https://registry.yarnpkg.com/lru-cache/-/lru-cache-6.0.0.tgz#6d6fe6570ebd96aaf90fcad1dafa3b2566db3a94"
@@ -1598,23 +1558,24 @@ lru-cache@^6.0.0:
   dependencies:
     yallist "^4.0.0"
 
-markdown-it@^12.3.2:
+markdown-it@^14.1.0:
-  version "12.3.2"
+  version "14.1.0"
-  resolved "https://registry.yarnpkg.com/markdown-it/-/markdown-it-12.3.2.tgz#bf92ac92283fe983fe4de8ff8abfb5ad72cd0c90"
+  resolved "https://registry.yarnpkg.com/markdown-it/-/markdown-it-14.1.0.tgz#3c3c5992883c633db4714ccb4d7b5935d98b7d45"
-  integrity sha512-TchMembfxfNVpHkbtriWltGWc+m3xszaRD0CZup7GFFhzIgQqxIfn3eGj1yZpfuflzPvfkt611B2Q/Bsk1YnGg==
+  integrity sha512-a54IwgWPaeBCAAsv13YgmALOF1elABB08FxO9i+r4VFk5Vl4pKokRPeX8u5TCgSsPi6ec1otfLjdOpVcgbpshg==
   dependencies:
     argparse "^2.0.1"
-    entities "~2.1.0"
+    entities "^4.4.0"
-    linkify-it "^3.0.1"
+    linkify-it "^5.0.0"
-    mdurl "^1.0.1"
+    mdurl "^2.0.0"
-    uc.micro "^1.0.5"
+    punycode.js "^2.3.1"
+    uc.micro "^2.1.0"
 
-mdurl@^1.0.1:
+mdurl@^2.0.0:
-  version "1.0.1"
+  version "2.0.0"
-  resolved "https://registry.yarnpkg.com/mdurl/-/mdurl-1.0.1.tgz#fe85b2ec75a59037f2adfec100fd6c601761152e"
+  resolved "https://registry.yarnpkg.com/mdurl/-/mdurl-2.0.0.tgz#80676ec0433025dd3e17ee983d0fe8de5a2237e0"
-  integrity sha512-/sKlQJCBYVY9Ers9hqzKou4H6V5UWc/M59TH2dvkt+84itfnq7uFOMLpOiOS4ujvHP4etln18fmIxA5R5fll0g==
+  integrity sha512-Lf+9+2r+Tdp5wXDXC4PcIBjTDtq4UKjCPMQhKIuzpJNW0b96kVqSwW0bT7FhRSfmAiFYgP+SCRvdrDozfh0U5w==
 
-merge2@^1.3.0, merge2@^1.4.1:
+merge2@^1.3.0:
   version "1.4.1"
   resolved "https://registry.yarnpkg.com/merge2/-/merge2-1.4.1.tgz#4368892f885e907455a6fd7dc55c0c9d404990ae"
   integrity sha512-8q7VEgMJW4J8tcfVPy8g09NcQwZdbwFEqhe/WZkoIzjn/3TGDwtOCYtXGxA3O8tPzpczCCDgv+P2P5y00ZJOOg==
@@ -1654,14 +1615,14 @@ mimic-response@^3.1.0:
   resolved "https://registry.yarnpkg.com/mimic-response/-/mimic-response-3.1.0.tgz#2d1d59af9c1b129815accc2c46a022a5ce1fa3c9"
   integrity sha512-z0yWI+4FDrrweS8Zmt4Ej5HdJmky15+L2e6Wgn3+iK5fWzb6T3fhNFq2+MeTRb064c6Wr4N/wv0DzQTjNzHNGQ==
 
-minimatch@9.0.3:
+minimatch@^10.0.0:
-  version "9.0.3"
+  version "10.0.1"
-  resolved "https://registry.yarnpkg.com/minimatch/-/minimatch-9.0.3.tgz#a6e00c3de44c3a542bfaae70abfc22420a6da825"
+  resolved "https://registry.yarnpkg.com/minimatch/-/minimatch-10.0.1.tgz#ce0521856b453c86e25f2c4c0d03e6ff7ddc440b"
-  integrity sha512-RHiac9mvaRw0x3AYRgDC1CxAP7HTcNrrECeA8YYJeWnpo+2Q5CegtZjaotWTWxDG3UeGA1coE05iH1mPjT/2mg==
+  integrity sha512-ethXTt3SGGR+95gudmqJ1eNhRO7eGEGIgYA9vnPatK4/etz2MEVDno5GMCibdMTuBMyElzIlgxMna3K94XDIDQ==
   dependencies:
     brace-expansion "^2.0.1"
 
-minimatch@^3.0.3, minimatch@^3.1.1:
+minimatch@^3.0.3:
   version "3.1.2"
   resolved "https://registry.yarnpkg.com/minimatch/-/minimatch-3.1.2.tgz#19cd194bfd3e428f049a70817c038d89ab4be35b"
   integrity sha512-J7p63hRiAjw1NDEww1W7i37+ByIrOWO5XQQAzZ3VOcL0PNybwpfmV/N05zFAzwQ9USyEcX6t3UO+K5aqBQOIHw==
@@ -1777,7 +1738,7 @@ object-inspect@^1.13.1:
   resolved "https://registry.yarnpkg.com/object-inspect/-/object-inspect-1.13.1.tgz#b96c6109324ccfef6b12216a956ca4dc2ff94bc2"
   integrity sha512-5qoj1RUiKOMsCCNLV1CBiPYE10sziTsnmNxkAI/rZhiD63CF7IqdFGC/XzjWjpSgLf0LxXX3bDFIh0E18f6UhQ==
 
-once@^1.3.0, once@^1.3.1, once@^1.4.0:
+once@^1.3.1, once@^1.4.0:
   version "1.4.0"
   resolved "https://registry.yarnpkg.com/once/-/once-1.4.0.tgz#583b1aa775961d4b113ac17d9c50baef9dd76bd1"
   integrity sha512-lNaJgI+2Q5URQBkccEKHTQOPaXdUxnZZElQTZY0MFUAuaEqe1E+Nyvgdz/aIyNi6Z9MzO5dv1H8n58/GELp3+w==
@@ -1866,11 +1827,6 @@ path-exists@^4.0.0:
   resolved "https://registry.yarnpkg.com/path-exists/-/path-exists-4.0.0.tgz#513bdbe2d3b95d7762e8c1137efa195c6c61b5b3"
   integrity sha512-ak9Qy5Q7jYb2Wwcey5Fpvg2KoAc/ZIhLSLOSBmRmygPsGwkVVt0fZa0qrtMz+m6tJTAHfZQ8FnmB4MG4LWy7/w==
 
-path-is-absolute@^1.0.0:
-  version "1.0.1"
-  resolved "https://registry.yarnpkg.com/path-is-absolute/-/path-is-absolute-1.0.1.tgz#174b9268735534ffbc7ace6bf53a5a9e1b5c5f5f"
-  integrity sha512-AVbw3UJ2e9bq64vSaS9Am0fje1Pa8pbGqTTsmXfaIiMpnr5DlDhfJOuLj9Sf95ZPVDAUerDfEk88MPmPe7UCQg==
-
 path-key@^3.1.0:
   version "3.1.1"
   resolved "https://registry.yarnpkg.com/path-key/-/path-key-3.1.1.tgz#581f6ade658cbba65a0d3380de7753295054f375"
@@ -1884,10 +1840,13 @@ path-scurry@^1.11.1:
     lru-cache "^10.2.0"
     minipass "^5.0.0 || ^6.0.2 || ^7.0.0"
 
-path-type@^4.0.0:
+path-scurry@^2.0.0:
-  version "4.0.0"
+  version "2.0.0"
-  resolved "https://registry.yarnpkg.com/path-type/-/path-type-4.0.0.tgz#84ed01c0a7ba380afe09d90a8c180dcd9d03043b"
+  resolved "https://registry.yarnpkg.com/path-scurry/-/path-scurry-2.0.0.tgz#9f052289f23ad8bf9397a2a0425e7b8615c58580"
-  integrity sha512-gDKb8aZMDeD/tZWs9P6+q0J9Mwkdl6xMV8TjnGP3qJVJ06bdMgkbBlLU8IdfOsIsFz2BW1rNVT3XuNEl8zPAvw==
+  integrity sha512-ypGJsmGtdXUOeM5u93TyeIEfEhM6s+ljAhrk5vAvSx8uyY/02OvrZnA0YNGUrPXfpJMgI1ODd3nwz8Npx4O4cg==
+  dependencies:
+    lru-cache "^11.0.0"
+    minipass "^7.1.2"
 
 pend@~1.2.0:
   version "1.2.0"
@@ -1930,6 +1889,11 @@ pump@^3.0.0:
     end-of-stream "^1.1.0"
     once "^1.3.1"
 
+punycode.js@^2.3.1:
+  version "2.3.1"
+  resolved "https://registry.yarnpkg.com/punycode.js/-/punycode.js-2.3.1.tgz#6b53e56ad75588234e79f4affa90972c7dd8cdb7"
+  integrity sha512-uxFIHU0YlHYhDQtV4R9J6a52SLx28BCjT+4ieh7IGbgwVJWO+km431c4yRlREUAsAmt/uMjQUyQHNEPf0M39CA==
+
 qs@^6.9.1:
   version "6.12.1"
   resolved "https://registry.yarnpkg.com/qs/-/qs-6.12.1.tgz#39422111ca7cbdb70425541cba20c7d7b216599a"
@@ -2040,10 +2004,10 @@ semver@^5.1.0:
   resolved "https://registry.yarnpkg.com/semver/-/semver-5.7.2.tgz#48d55db737c3287cd4835e17fa13feace1c41ef8"
   integrity sha512-cBznnQ9KjJqU67B52RMC65CMarK2600WFnbkcaiwWq3xy/5haFJlshgnpjovMVJ+Hff49d8GEn0b87C5pDQ10g==
 
-semver@^7.3.5, semver@^7.3.7, semver@^7.5.2, semver@^7.5.4, semver@^7.6.2:
+semver@^7.3.5, semver@^7.3.7, semver@^7.5.2, semver@^7.5.4, semver@^7.6.0, semver@^7.6.2:
-  version "7.6.2"
+  version "7.7.1"
-  resolved "https://registry.yarnpkg.com/semver/-/semver-7.6.2.tgz#1e3b34759f896e8f14d6134732ce798aeb0c6e13"
+  resolved "https://registry.yarnpkg.com/semver/-/semver-7.7.1.tgz#abd5098d82b18c6c81f6074ff2647fd3e7220c9f"
-  integrity sha512-FNAIBWCx9qcRhoHcgcJ0gvU7SN1lYU2ZXuSfl04bSC5OpvDHFyJCjdNHomPXxjQlCBU67YW64PzY7/VIEH7F2w==
+  integrity sha512-hlq8tAfn0m/61p4BVRcPzIGr6LKiMwo4VM6dGi6pt4qcRkmNzTcWq6eCEjEh+qXjkMDvPlOFFSGwQjoEa6gyMA==
 
 serialize-javascript@^6.0.2:
   version "6.0.2"
@@ -2115,11 +2079,6 @@ simple-get@^4.0.0:
     once "^1.3.1"
     simple-concat "^1.0.0"
 
-slash@^3.0.0:
-  version "3.0.0"
-  resolved "https://registry.yarnpkg.com/slash/-/slash-3.0.0.tgz#6539be870c165adbd5240220dbe361f1bc4d4634"
-  integrity sha512-g9Q1haeby36OSStwb4ntCGGGaKsaVSjQ68fBxoQcutl5fS1vuY18H3wSt3jFyFtrkx+Kz0V1G85A4MyAdDMi2Q==
-
 stdin-discarder@^0.1.0:
   version "0.1.0"
   resolved "https://registry.yarnpkg.com/stdin-discarder/-/stdin-discarder-0.1.0.tgz#22b3e400393a8e28ebf53f9958f3880622efde21"
@@ -2255,7 +2214,7 @@ tar-stream@^2.1.4:
     inherits "^2.0.3"
     readable-stream "^3.1.1"
 
-tmp@^0.2.1:
+tmp@^0.2.3:
   version "0.2.3"
   resolved "https://registry.yarnpkg.com/tmp/-/tmp-0.2.3.tgz#eb783cc22bc1e8bebd0671476d46ea4eb32a79ae"
   integrity sha512-nZD7m9iCPC5g0pYmcaxogYKggSfLsdxl8of3Q/oIbqCqLLIO9IAF0GWjX1z9NZRHPiXv8Wex4yDCaZsgEw0Y8w==
@@ -2267,10 +2226,10 @@ to-regex-range@^5.0.1:
   dependencies:
     is-number "^7.0.0"
 
-ts-api-utils@^1.0.1:
+ts-api-utils@^2.0.1:
-  version "1.4.3"
+  version "2.1.0"
-  resolved "https://registry.yarnpkg.com/ts-api-utils/-/ts-api-utils-1.4.3.tgz#bfc2215fe6528fecab2b0fba570a2e8a4263b064"
+  resolved "https://registry.yarnpkg.com/ts-api-utils/-/ts-api-utils-2.1.0.tgz#595f7094e46eed364c13fd23e75f9513d29baf91"
-  integrity sha512-i3eMG77UTMD0hZhgRS562pv83RC6ukSAC2GMNWc+9dieh/+jDM5u5YG+NHX6VNDRHQcHwmsTHctP9LhbC3WxVw==
+  integrity sha512-CUgTZL1irw8u29bzrOD/nH85jqyc74D6SshFgujOIA7osm2Rz7dYH77agkx7H4FBNxDq7Cjf+IjaX/8zwFW+ZQ==
 
 tslib@^2.2.0, tslib@^2.6.2:
   version "2.6.2"
@@ -2303,10 +2262,10 @@ typescript@^5.8.2:
   resolved "https://registry.yarnpkg.com/typescript/-/typescript-5.8.2.tgz#8170b3702f74b79db2e5a96207c15e65807999e4"
   integrity sha512-aJn6wq13/afZp/jT9QZmwEjDqqvSGp1VT5GVg+f/t6/oVyrgXM6BY1h9BRh/O5p3PlUPAe+WuiEZOmb/49RqoQ==
 
-uc.micro@^1.0.1, uc.micro@^1.0.5:
+uc.micro@^2.0.0, uc.micro@^2.1.0:
-  version "1.0.6"
+  version "2.1.0"
-  resolved "https://registry.yarnpkg.com/uc.micro/-/uc.micro-1.0.6.tgz#9c411a802a409a91fc6cf74081baba34b24499ac"
+  resolved "https://registry.yarnpkg.com/uc.micro/-/uc.micro-2.1.0.tgz#f8d3f7d0ec4c3dea35a7e3c8efa4cb8b45c9e7ee"
-  integrity sha512-8Y75pvTYkLJW2hWQHXxoqRgV7qb9B+9vFEtidML+7koHUFapnVJAZ6cKs+Qjz5Aw3aZWHMC6u0wJE3At+nSGwA==
+  integrity sha512-ARDJmphmdvUk6Glw7y9DQ2bFkKBHwQHLi2lsaH6PPmz/Ka9sFOBsBluozhDltWmnv9u/cF6Rt87znRTPV+yp/A==
 
 underscore@^1.12.1:
   version "1.13.6"

rust/kcl-lib/Cargo.toml

@@ -1,7 +1,7 @@
 [package]
 name = "kcl-lib"
 description = "KittyCAD Language implementation and tools"
-version = "0.2.52"
+version = "0.2.54"
 edition = "2021"
 license = "MIT"
 repository = "https://github.com/KittyCAD/modeling-app"

rust/kcl-lib/benches/benchmark_kcl_samples.rs

@@ -76,7 +76,7 @@ fn run_benchmarks(c: &mut Criterion) {
         group.bench_function(format!("execute_{}", dir_name), |b| {
             b.iter(|| {
                 if let Err(err) = rt.block_on(async {
-                    let ctx = kcl_lib::ExecutorContext::new_with_default_client().await?;
+                    let ctx = kcl_lib::ExecutorContext::new_with_default_client(Default::default()).await?;
                     let mut exec_state = kcl_lib::ExecState::new(&ctx);
                     ctx.run(black_box(&program), &mut exec_state).await?;
                     ctx.close().await;

rust/kcl-lib/e2e/executor/cache.rs

@@ -49,6 +49,45 @@ async fn cache_test(
     img_results
 }
 
+#[tokio::test(flavor = "multi_thread")]
+async fn kcl_test_cache_change_units_changes_output() {
+    let code = r#"part001 = startSketchOn('XY')
+  |> startProfileAt([5.5229, 5.25217], %)
+  |> line(end = [10.50433, -1.19122])
+  |> line(end = [8.01362, -5.48731])
+  |> line(end = [-1.02877, -6.76825])
+  |> line(end = [-11.53311, 2.81559])
+  |> close()
+  |> extrude(length = 4)
+"#;
+
+    let result = cache_test(
+        "change_units_changes_output",
+        vec![
+            Variation {
+                code,
+                settings: &kcl_lib::ExecutorSettings {
+                    units: kcl_lib::UnitLength::In,
+                    ..Default::default()
+                },
+            },
+            Variation {
+                code,
+                settings: &kcl_lib::ExecutorSettings {
+                    units: kcl_lib::UnitLength::Mm,
+                    ..Default::default()
+                },
+            },
+        ],
+    )
+    .await;
+
+    let first = result.first().unwrap();
+    let second = result.last().unwrap();
+
+    assert!(first.1 != second.1);
+}
+
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_cache_change_grid_visualizes_grid_off_to_on() {
     let code = r#"part001 = startSketchOn('XY')

rust/kcl-lib/e2e/executor/inputs/cylinder-inches.kcl

@@ -1,4 +0,0 @@
-@settings(defaultLengthUnit = in)
-sketch001 = startSketchOn(XZ)
-  |> circle(center = [0, 0], radius = 20)
-extrude001 = extrude(sketch001, length = 10)

rust/kcl-lib/e2e/executor/inputs/e2e-can-sketch-on-chamfer-no-pipeExpr.kcl

@@ -1,5 +1,4 @@
-@settings(defaultLengthUnit = in)
+const sketch001 = startSketchOn(XZ)
-sketch001 = startSketchOn(XZ)
   |> startProfileAt([75.8, 317.2], %)
   |> angledLine([0, 268.43], %, $rectangleSegmentA001)
   |> angledLine([
@@ -12,8 +11,8 @@ sketch001 = startSketchOn(XZ)
      ], %, $yo)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg02)
   |> close()
-extrude001 = extrude(sketch001, length = 100)
+const extrude001 = extrude(sketch001, length = 100)
-chamf = chamfer(
+const chamf = chamfer(
   extrude001,
   length = 30,
   tags = [

rust/kcl-lib/e2e/executor/inputs/e2e-can-sketch-on-chamfer.kcl

@@ -1,5 +1,4 @@
-@settings(defaultLengthUnit = in)
+const sketch001 = startSketchOn(XZ)
-sketch001 = startSketchOn(XZ)
   |> startProfileAt([75.8, 317.2], %) // [$startCapTag, $EndCapTag]
   |> angledLine([0, 268.43], %, $rectangleSegmentA001)
   |> angledLine([
@@ -12,7 +11,7 @@ sketch001 = startSketchOn(XZ)
      ], %, $yo)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg02)
   |> close()
-extrude001 = extrude(sketch001, length = 100)
+const extrude001 = extrude(sketch001, length = 100)
   |> chamfer(
        length = 30,
        tags = [

rust/kcl-lib/e2e/executor/inputs/helix_defaults.kcl

@@ -1,4 +1,4 @@
 const part001 = startSketchOn(XY)
      |> circle(center= [5, 5], radius= 10)
      |> extrude(length = 10)
-     |> helixRevolutions({revolutions = 16, angleStart = 0}, %)
+     |> helix(revolutions = 16, angleStart = 0, cylinder = %)

rust/kcl-lib/e2e/executor/inputs/helix_defaults_negative_extrude.kcl

@@ -1,4 +1,4 @@
 const part001 = startSketchOn(XY)
      |> circle(center = [5, 5], radius = 10)
      |> extrude(length = -10)
-     |> helixRevolutions({revolutions = 16, angleStart = 0}, %)
+     |> helix(revolutions = 16, angleStart = 0, cylinder = %)

rust/kcl-lib/e2e/executor/inputs/helix_with_length.kcl

@@ -1,4 +1,4 @@
 const part001 = startSketchOn(XY)
      |> circle(center= [5, 5], radius= 10)
      |> extrude(length = 10)
-     |> helixRevolutions({revolutions = 16, angleStart = 0, length = 3}, %)
+     |> helix(revolutions = 16, angleStart = 0, length = 3, cylinder = %)

rust/kcl-lib/e2e/executor/main.rs

@@ -2,7 +2,7 @@ mod cache;
 
 use kcl_lib::{
     test_server::{execute_and_export_step, execute_and_snapshot, execute_and_snapshot_no_auth},
-    ExecError,
+    ExecError, UnitLength,
 };
 
 /// The minimum permissible difference between asserted twenty-twenty images.
@@ -26,7 +26,7 @@ pub(crate) fn assert_out(test_name: &str, result: &image::DynamicImage) -> Strin
 async fn kcl_test_fillet_duplicate_tags() {
     let code = kcl_input!("fillet_duplicate_tags");
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     let err = result.expect_err("Code should have failed due to the duplicate edges being filletted");
 
     let err = err.as_kcl_error().unwrap();
@@ -48,7 +48,7 @@ async fn kcl_test_execute_engine_error_return() {
   |> extrude(length = 4)
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
@@ -61,7 +61,7 @@ async fn kcl_test_execute_i_shape() {
     // This is some code from lee that starts a pipe expression with a variable.
     let code = kcl_input!("i_shape");
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("i_shape", &result);
 }
 
@@ -70,7 +70,7 @@ async fn kcl_test_execute_i_shape() {
 async fn kcl_test_execute_pipes_on_pipes() {
     let code = kcl_input!("pipes_on_pipes");
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("pipes_on_pipes", &result);
 }
 
@@ -78,7 +78,7 @@ async fn kcl_test_execute_pipes_on_pipes() {
 async fn kcl_test_execute_cylinder() {
     let code = kcl_input!("cylinder");
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("cylinder", &result);
 }
 
@@ -86,7 +86,7 @@ async fn kcl_test_execute_cylinder() {
 async fn kcl_test_execute_kittycad_svg() {
     let code = kcl_input!("kittycad_svg");
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("kittycad_svg", &result);
 }
 
@@ -94,7 +94,7 @@ async fn kcl_test_execute_kittycad_svg() {
 async fn kcl_test_execute_lsystem() {
     let code = kcl_input!("lsystem");
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("lsystem", &result);
 }
 
@@ -102,7 +102,7 @@ async fn kcl_test_execute_lsystem() {
 async fn kcl_test_member_expression_sketch() {
     let code = kcl_input!("member_expression_sketch");
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("member_expression_sketch", &result);
 }
 
@@ -110,7 +110,7 @@ async fn kcl_test_member_expression_sketch() {
 async fn kcl_test_helix_defaults() {
     let code = kcl_input!("helix_defaults");
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("helix_defaults", &result);
 }
 
@@ -118,7 +118,7 @@ async fn kcl_test_helix_defaults() {
 async fn kcl_test_helix_defaults_negative_extrude() {
     let code = kcl_input!("helix_defaults_negative_extrude");
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("helix_defaults_negative_extrude", &result);
 }
 
@@ -126,7 +126,7 @@ async fn kcl_test_helix_defaults_negative_extrude() {
 async fn kcl_test_helix_with_length() {
     let code = kcl_input!("helix_with_length");
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("helix_with_length", &result);
 }
 
@@ -134,7 +134,7 @@ async fn kcl_test_helix_with_length() {
 async fn kcl_test_dimensions_match() {
     let code = kcl_input!("dimensions_match");
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("dimensions_match", &result);
 }
 
@@ -142,7 +142,7 @@ async fn kcl_test_dimensions_match() {
 async fn kcl_test_close_arc() {
     let code = kcl_input!("close_arc");
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("close_arc", &result);
 }
 
@@ -150,7 +150,7 @@ async fn kcl_test_close_arc() {
 async fn kcl_test_negative_args() {
     let code = kcl_input!("negative_args");
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("negative_args", &result);
 }
 
@@ -164,7 +164,7 @@ async fn kcl_test_basic_tangential_arc_with_point() {
     |> extrude(length = 10)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("tangential_arc_with_point", &result);
 }
 
@@ -178,7 +178,7 @@ async fn kcl_test_basic_tangential_arc_to() {
     |> extrude(length = 10)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("tangential_arc_to", &result);
 }
 
@@ -205,7 +205,7 @@ box(30, 43, 18, '-xy')
 let thing = box(-12, -15, 10, 'yz')
 box(-20, -5, 10, 'xy')"#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("different_planes_same_drawing", &result);
 }
 
@@ -263,7 +263,7 @@ part004 = startSketchOn(YZ)
   |> close()
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("lots_of_planes", &result);
 }
 
@@ -280,7 +280,7 @@ async fn kcl_test_holes() {
   |> extrude(length = 2)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("holes", &result);
 }
 
@@ -299,7 +299,7 @@ async fn optional_params() {
 
 thing = other_circle([2, 2], 20)
 "#;
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("optional_params", &result);
 }
 
@@ -335,7 +335,7 @@ part = roundedRectangle([0, 0], 20, 20, 4)
   |> extrude(length = 2)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("rounded_with_holes", &result);
 }
 
@@ -343,7 +343,7 @@ part = roundedRectangle([0, 0], 20, 20, 4)
 async fn kcl_test_top_level_expression() {
     let code = r#"startSketchOn(XY) |> circle(center = [0,0], radius= 22) |> extrude(length = 14)"#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("top_level_expression", &result);
 }
 
@@ -357,7 +357,7 @@ part =  startSketchOn(XY)
     |> extrude(length = 1)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("patterns_linear_basic_with_math", &result);
 }
 
@@ -369,7 +369,7 @@ async fn kcl_test_patterns_linear_basic() {
     |> extrude(length = 1)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("patterns_linear_basic", &result);
 }
 
@@ -385,7 +385,7 @@ async fn kcl_test_patterns_linear_basic_3d() {
     |> patternLinear3d(axis = [1, 0, 1], instances = 4, distance = 6)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("patterns_linear_basic_3d", &result);
 }
 
@@ -397,7 +397,7 @@ async fn kcl_test_patterns_linear_basic_negative_distance() {
     |> extrude(length = 1)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("patterns_linear_basic_negative_distance", &result);
 }
 
@@ -409,7 +409,7 @@ async fn kcl_test_patterns_linear_basic_negative_axis() {
     |> extrude(length = 1)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("patterns_linear_basic_negative_axis", &result);
 }
 
@@ -430,7 +430,7 @@ rectangle = startSketchOn(XY)
 
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("patterns_linear_basic_holes", &result);
 }
 
@@ -442,7 +442,7 @@ async fn kcl_test_patterns_circular_basic_2d() {
     |> extrude(length = 1)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("patterns_circular_basic_2d", &result);
 }
 
@@ -458,7 +458,7 @@ async fn kcl_test_patterns_circular_basic_3d() {
     |> patternCircular3d(axis = [0,0, 1], center = [-20, -20, -20], instances = 41, arcDegrees = 360, rotateDuplicates = false)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("patterns_circular_basic_3d", &result);
 }
 
@@ -474,7 +474,7 @@ async fn kcl_test_patterns_circular_3d_tilted_axis() {
     |> patternCircular3d(axis = [1,1,0], center = [10, 0, 10], instances = 11, arcDegrees = 360, rotateDuplicates = true)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("patterns_circular_3d_tilted_axis", &result);
 }
 
@@ -483,7 +483,7 @@ async fn kcl_test_import_file_doesnt_exist() {
     let code = r#"import 'thing.obj'
 model = cube"#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
@@ -496,7 +496,7 @@ async fn kcl_test_import_obj_with_mtl() {
     let code = r#"import 'e2e/executor/inputs/cube.obj'
 model = cube"#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("import_obj_with_mtl", &result);
 }
 
@@ -506,7 +506,7 @@ async fn kcl_test_import_obj_with_mtl_units() {
 import 'e2e/executor/inputs/cube.obj'
 model = cube"#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("import_obj_with_mtl_units", &result);
 }
 
@@ -515,7 +515,7 @@ async fn kcl_test_import_stl() {
     let code = r#"import 'e2e/executor/inputs/2-5-long-m8-chc-screw.stl' as screw
 model = screw"#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("import_stl", &result);
 }
 
@@ -524,7 +524,7 @@ async fn kcl_test_import_gltf_with_bin() {
     let code = r#"import 'e2e/executor/inputs/cube.gltf'
 model = cube"#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("import_gltf_with_bin", &result);
 }
 
@@ -533,7 +533,7 @@ async fn kcl_test_import_gltf_embedded() {
     let code = r#"import 'e2e/executor/inputs/cube-embedded.gltf' as cube
 model = cube"#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("import_gltf_embedded", &result);
 }
 
@@ -542,7 +542,7 @@ async fn kcl_test_import_glb() {
     let code = r#"import 'e2e/executor/inputs/cube.glb'
 model = cube"#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("import_glb", &result);
 }
 
@@ -551,7 +551,7 @@ async fn kcl_test_import_glb_no_assign() {
     let code = r#"import 'e2e/executor/inputs/cube.glb'
 cube"#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("import_glb_no_assign", &result);
 }
 
@@ -561,7 +561,7 @@ async fn kcl_test_import_ext_doesnt_match() {
 import 'e2e/executor/inputs/cube.gltf'
 model = cube"#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
@@ -586,15 +586,14 @@ async fn kcl_test_cube_mm() {
 myCube = cube([0,0], 10)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("cube_mm", &result);
 }
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_cube_cm() {
-    let code = r#"@settings(defaultLengthUnit = cm)
+    let code = r#"fn cube = (pos, scale) => {
-fn cube = (pos, scale) => {
+  sg = startSketchOn(XY)
-  sg = startSketchOn('XY')
     |> startProfileAt(pos, %)
     |> line(end = [0, scale])
     |> line(end = [scale, 0])
@@ -608,15 +607,14 @@ fn cube = (pos, scale) => {
 myCube = cube([0,0], 10)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Cm, None).await.unwrap();
     assert_out("cube_cm", &result);
 }
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_cube_m() {
-    let code = r#"@settings(defaultLengthUnit = m)
+    let code = r#"fn cube = (pos, scale) => {
-fn cube = (pos, scale) => {
+  sg = startSketchOn(XY)
-  sg = startSketchOn('XY')
     |> startProfileAt(pos, %)
     |> line(end = [0, scale])
     |> line(end = [scale, 0])
@@ -630,15 +628,14 @@ fn cube = (pos, scale) => {
 myCube = cube([0,0], 10)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::M, None).await.unwrap();
     assert_out("cube_m", &result);
 }
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_cube_in() {
-    let code = r#"@settings(defaultLengthUnit = in)
+    let code = r#"fn cube = (pos, scale) => {
-fn cube = (pos, scale) => {
+  sg = startSketchOn(XY)
-  sg = startSketchOn('XY')
     |> startProfileAt(pos, %)
     |> line(end = [0, scale])
     |> line(end = [scale, 0])
@@ -652,15 +649,14 @@ fn cube = (pos, scale) => {
 myCube = cube([0,0], 10)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::In, None).await.unwrap();
     assert_out("cube_in", &result);
 }
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_cube_ft() {
-    let code = r#"@settings(defaultLengthUnit = ft)
+    let code = r#"fn cube = (pos, scale) => {
-fn cube = (pos, scale) => {
+  sg = startSketchOn(XY)
-  sg = startSketchOn('XY')
     |> startProfileAt(pos, %)
     |> line(end = [0, scale])
     |> line(end = [scale, 0])
@@ -674,15 +670,14 @@ fn cube = (pos, scale) => {
 myCube = cube([0,0], 10)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Ft, None).await.unwrap();
     assert_out("cube_ft", &result);
 }
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_cube_yd() {
-    let code = r#"@settings(defaultLengthUnit = yd)
+    let code = r#"fn cube = (pos, scale) => {
-fn cube = (pos, scale) => {
+  sg = startSketchOn(XY)
-  sg = startSketchOn('XY')
     |> startProfileAt(pos, %)
     |> line(end = [0, scale])
     |> line(end = [scale, 0])
@@ -696,7 +691,7 @@ fn cube = (pos, scale) => {
 myCube = cube([0,0], 10)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Yd, None).await.unwrap();
     assert_out("cube_yd", &result);
 }
 
@@ -724,7 +719,7 @@ part002 = startSketchOn(part001, part001.sketch.tags.here)
   |> extrude(length = 1)
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
 
     let err = result.err().unwrap();
     let ExecError::Kcl(err) = err else {
@@ -768,7 +763,7 @@ part003 = startSketchOn(part002, "end")
   |> extrude(length = 5)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("sketch_on_face_of_face", &result);
 }
 
@@ -785,7 +780,7 @@ async fn kcl_test_stdlib_kcl_error_right_code_path() {
   |> extrude(length = 2)
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     let err = result.err().unwrap();
     let ExecError::Kcl(err) = err else {
         panic!("Expected KCL error, found {err}");
@@ -816,7 +811,7 @@ part002 = startSketchOn(part001, "end")
   |> extrude(length = 5)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("sketch_on_face_circle", &result);
 }
 
@@ -842,10 +837,10 @@ holeIndex = 6
 
 // Create the mounting plate extrusion, holes, and fillets
 part = rectShape([0, 0], 20, 20)
-  |> hole(circle(XY, [-holeIndex, holeIndex], holeRadius), %)
+  |> hole(circle('XY', center = [-holeIndex, holeIndex], radius = holeRadius), %)
-  |> hole(circle(XY, [holeIndex, holeIndex], holeRadius), %)
+  |> hole(circle('XY', center = [holeIndex, holeIndex], radius = holeRadius), %)
-  |> hole(circle(XY, [-holeIndex, -holeIndex], holeRadius), %)
+  |> hole(circle('XY', center = [-holeIndex, -holeIndex], radius = holeRadius), %)
-  |> hole(circle(XY, [holeIndex, -holeIndex], holeRadius), %)
+  |> hole(circle('XY', center = [holeIndex, -holeIndex], radius = holeRadius), %)
   |> extrude(length = 2)
   |> fillet(
        radius = 4,
@@ -858,14 +853,14 @@ part = rectShape([0, 0], 20, 20)
      )
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     let err = result.err().unwrap();
     let ExecError::Kcl(err) = err else {
         panic!("Expected KCL error, found {err}");
     };
     assert_eq!(
         err.error.message(),
-        "This function requires a keyword argument 'center'"
+        "The input argument of std::sketch::circle requires a value with type `Sketch | Plane | Face`, but found string (text)"
     );
 }
 
@@ -885,7 +880,7 @@ async fn kcl_test_simple_revolve() {
 
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("simple_revolve", &result);
 }
 
@@ -905,7 +900,7 @@ async fn kcl_test_simple_revolve_uppercase() {
 
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("simple_revolve_uppercase", &result);
 }
 
@@ -925,7 +920,7 @@ async fn kcl_test_simple_revolve_negative() {
 
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("simple_revolve_negative", &result);
 }
 
@@ -945,7 +940,7 @@ async fn kcl_test_revolve_bad_angle_low() {
 
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
 
     assert!(result.is_err());
     assert!(result
@@ -971,7 +966,7 @@ async fn kcl_test_revolve_bad_angle_high() {
 
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
 
     assert!(result.is_err());
     assert!(result
@@ -997,7 +992,7 @@ async fn kcl_test_simple_revolve_custom_angle() {
 
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("simple_revolve_custom_angle", &result);
 }
 
@@ -1017,7 +1012,7 @@ async fn kcl_test_simple_revolve_custom_axis() {
 
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("simple_revolve_custom_axis", &result);
 }
 
@@ -1041,7 +1036,7 @@ sketch001 = startSketchOn(box, "end")
 
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("revolve_on_edge", &result);
 }
 
@@ -1065,7 +1060,7 @@ sketch001 = startSketchOn(box, revolveAxis)
 
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
 
     result.unwrap_err();
     //this fails right now, but slightly differently, lets just say its enough for it to fail - mike
@@ -1093,7 +1088,7 @@ sketch001 = startSketchOn(box, "END")
     )
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("revolve_on_face_circle_edge", &result);
 }
 
@@ -1115,7 +1110,7 @@ sketch001 = startSketchOn(box, "END")
     )
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("revolve_on_face_circle", &result);
 }
 
@@ -1141,7 +1136,7 @@ sketch001 = startSketchOn(box, "end")
   )
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("revolve_on_face", &result);
 }
 
@@ -1155,7 +1150,7 @@ async fn kcl_test_basic_revolve_circle() {
     )
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("basic_revolve_circle", &result);
 }
 
@@ -1182,7 +1177,7 @@ part002 = startSketchOn(part001, 'end')
     |> extrude(length = 5)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("simple_revolve_sketch_on_edge", &result);
 }
 
@@ -1245,7 +1240,7 @@ plumbus1 = circle1
       )
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("plumbus_fillets", &result);
 }
 
@@ -1253,7 +1248,7 @@ plumbus1 = circle1
 async fn kcl_test_empty_file_is_ok() {
     let code = r#""#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     result.unwrap();
 }
 
@@ -1283,7 +1278,7 @@ async fn kcl_test_member_expression_in_params() {
 capScrew([0, 0.5, 0], 50, 37.5, 50, 25)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("member_expression_in_params", &result);
 }
 
@@ -1328,7 +1323,7 @@ bracket = startSketchOn(XY)
      )
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     result.unwrap();
 }
 
@@ -1348,11 +1343,11 @@ secondSketch = startSketchOn(part001, '')
   |> extrude(length = 20)
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
-        r#"semantic: KclErrorDetails { source_ranges: [SourceRange([297, 299, 0])], message: "Argument at index 1 was supposed to be type Option<kcl_lib::std::sketch::FaceTag> but found string (text)" }"#
+        r#"semantic: KclErrorDetails { source_ranges: [SourceRange([297, 299, 0])], message: "Argument at index 1 was supposed to be type Option<FaceTag> but found string (text)" }"#
     );
 }
 
@@ -1379,7 +1374,7 @@ extrusion = startSketchOn(XY)
   |> extrude(length = height)
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
@@ -1412,7 +1407,7 @@ sketch001 = [profile001, profile002]
  extrude(sketch001, length = 10)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("array_of_sketches", &result);
 }
 
@@ -1449,7 +1444,7 @@ pattn1 = patternLinear3d(
      )
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("pattern3d_array_of_extrudes", &result);
 }
 
@@ -1497,7 +1492,7 @@ baseExtrusion = extrude(sketch001, length = width)
  )
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("fillets_referencing_other_fillets", &result);
 }
 
@@ -1545,7 +1540,7 @@ baseExtrusion = extrude(sketch001, length = width)
    )
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("chamfers_referencing_other_chamfers", &result);
 }
 
@@ -1565,7 +1560,7 @@ async fn kcl_test_shell_with_tag() {
   )
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("shell_with_tag", &result);
 }
 
@@ -1596,7 +1591,7 @@ pattn1 = patternLinear3d(
 )
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("linear_pattern3d_filleted_sketch", &result);
 }
 
@@ -1623,7 +1618,7 @@ pattn2 = patternCircular3d(part001, axis = [0,0, 1], center = [-20, -20, -20], i
 
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("circular_pattern3d_filleted_sketch", &result);
 }
 
@@ -1649,7 +1644,7 @@ part001 = cube([0,0], 20)
 pattn2 = patternCircular3d(part001, axis = [0,0, 1], center = [-20, -20, -20], instances = 5, arcDegrees = 360, rotateDuplicates = false)
 "#;
 
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("circular_pattern3d_chamfered_sketch", &result);
 }
 
@@ -1676,7 +1671,7 @@ part001 = cube([0,0], 20)
 
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     let err = result.err().unwrap();
     let ExecError::Kcl(err) = err else {
         panic!("Expected KCL error, found {err}");
@@ -1706,7 +1701,7 @@ async fn kcl_test_duplicate_tags_should_error() {
 let p = triangle(200)
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
@@ -1717,49 +1712,49 @@ let p = triangle(200)
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_global_tags() {
     let code = kcl_input!("global-tags");
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("global_tags", &result);
 }
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_extrude_inside_fn_with_tags() {
     let code = kcl_input!("extrude-inside-fn-with-tags");
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("extrude-inside-fn-with-tags", &result);
 }
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_pattern_vase() {
     let code = kcl_input!("pattern_vase");
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("pattern_vase", &result);
 }
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_scoped_tags() {
     let code = kcl_input!("scoped-tags");
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("scoped_tags", &result);
 }
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_order_sketch_extrude_in_order() {
     let code = kcl_input!("order-sketch-extrude-in-order");
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("order-sketch-extrude-in-order", &result);
 }
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_order_sketch_extrude_out_of_order() {
     let code = kcl_input!("order-sketch-extrude-out-of-order");
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("order-sketch-extrude-out-of-order", &result);
 }
 
 #[tokio::test(flavor = "multi_thread")]
 async fn kcl_test_extrude_custom_plane() {
     let code = kcl_input!("extrude-custom-plane");
-    let result = execute_and_snapshot(code, None).await.unwrap();
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await.unwrap();
     assert_out("extrude-custom-plane", &result);
 }
 
@@ -1781,7 +1776,7 @@ async fn kcl_test_arc_error_same_start_end() {
      )
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
@@ -1801,7 +1796,7 @@ async fn kcl_test_angled_line_to_x_90() {
 example = extrude(exampleSketch, length = 10)
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
@@ -1821,7 +1816,7 @@ async fn kcl_test_angled_line_to_x_270() {
 example = extrude(exampleSketch, length = 10)
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
@@ -1841,7 +1836,7 @@ async fn kcl_test_angled_line_to_y_0() {
 example = extrude(exampleSketch, length = 10)
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
@@ -1861,7 +1856,7 @@ async fn kcl_test_angled_line_to_y_180() {
 example = extrude(exampleSketch, length = 10)
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
@@ -1881,7 +1876,7 @@ async fn kcl_test_angled_line_of_x_length_90() {
 extrusion = extrude(sketch001, length = 10)
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
@@ -1901,7 +1896,7 @@ async fn kcl_test_angled_line_of_x_length_270() {
 extrusion = extrude(sketch001, length = 10)
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
@@ -1923,7 +1918,7 @@ async fn kcl_test_angled_line_of_y_length_0() {
 example = extrude(exampleSketch, length = 10)
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
@@ -1945,7 +1940,7 @@ async fn kcl_test_angled_line_of_y_length_180() {
 example = extrude(exampleSketch, length = 10)
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
@@ -1967,7 +1962,7 @@ async fn kcl_test_angled_line_of_y_length_negative_180() {
 example = extrude(exampleSketch, length = 10)
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
@@ -1984,11 +1979,11 @@ async fn kcl_test_error_inside_fn_also_has_source_range_of_call_site() {
 someFunction('INVALID')
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
-        r#"semantic: KclErrorDetails { source_ranges: [SourceRange([51, 60, 0]), SourceRange([65, 88, 0])], message: "Argument at index 0 was supposed to be type kcl_lib::std::sketch::SketchData but found string (text)" }"#
+        r#"semantic: KclErrorDetails { source_ranges: [SourceRange([51, 60, 0]), SourceRange([65, 88, 0])], message: "Argument at index 0 was supposed to be type SketchData but found string (text)" }"#
     );
 }
 
@@ -2005,11 +2000,11 @@ async fn kcl_test_error_inside_fn_also_has_source_range_of_call_site_recursive()
 someFunction('INVALID')
 "#;
 
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert_eq!(
         result.err().unwrap().to_string(),
-        r#"semantic: KclErrorDetails { source_ranges: [SourceRange([103, 113, 0]), SourceRange([126, 155, 0]), SourceRange([159, 182, 0])], message: "Argument at index 0 was supposed to be type kcl_lib::std::sketch::SketchData but found string (text)" }"#
+        r#"semantic: KclErrorDetails { source_ranges: [SourceRange([103, 113, 0]), SourceRange([126, 155, 0]), SourceRange([159, 182, 0])], message: "Argument at index 0 was supposed to be type SketchData but found string (text)" }"#
     );
 }
 
@@ -2029,7 +2024,7 @@ async fn kcl_test_error_no_auth_websocket() {
   )
 "#;
 
-    let result = execute_and_snapshot_no_auth(code, None).await;
+    let result = execute_and_snapshot_no_auth(code, UnitLength::Mm, None).await;
     assert!(result.is_err());
     assert!(result
         .err()
@@ -2055,7 +2050,9 @@ sketch000 = startSketchOn(XY)
     |> line(end = [0, innerDiameter / 2])
 "#;
 
-    let ctx = kcl_lib::ExecutorContext::new_with_default_client().await.unwrap();
+    let ctx = kcl_lib::ExecutorContext::new_with_default_client(Default::default())
+        .await
+        .unwrap();
     let mut exec_state = kcl_lib::ExecState::new(&ctx);
     let program = kcl_lib::Program::parse_no_errs(code).unwrap();
     ctx.run(&program, &mut exec_state).await.unwrap();
@@ -2078,7 +2075,9 @@ async fn kcl_test_ensure_nothing_left_in_batch_multi_file() {
     // Change the current working directory to the test directory.
     std::env::set_current_dir(path.parent().unwrap()).unwrap();
 
-    let ctx = kcl_lib::ExecutorContext::new_with_default_client().await.unwrap();
+    let ctx = kcl_lib::ExecutorContext::new_with_default_client(Default::default())
+        .await
+        .unwrap();
     let mut exec_state = kcl_lib::ExecState::new(&ctx);
     let program = kcl_lib::Program::parse_no_errs(&code).unwrap();
     ctx.run(&program, &mut exec_state).await.unwrap();
@@ -2096,7 +2095,7 @@ async fn kcl_test_better_type_names() {
   |> circle(center = [-95.51, -74.7], radius = 262.23)
   |> appearance(metalness = 0.9)
 "#;
-    let result = execute_and_snapshot(code, None).await;
+    let result = execute_and_snapshot(code, UnitLength::Mm, None).await;
 
     let err = match result.err() {
         Some(x) => match x {
@@ -2115,7 +2114,7 @@ async fn kcl_test_exporting_step_file() {
     // This tests export like how we do it in cli and kcl.py.
     let code = kcl_input!("helix_defaults_negative_extrude");
 
-    let (_, _, files) = execute_and_export_step(code, None).await.unwrap();
+    let (_, _, files) = execute_and_export_step(code, UnitLength::Mm, None).await.unwrap();
     for file in files {
         expectorate::assert_contents(
             format!("e2e/executor/outputs/helix_defaults_negative_extrude_{}", file.name),