Add debouncing settle detection

* Fix to not call onMouseLeave with no selected object

* Add no this alias lint

* Add more lints and fix JSON formatting

* Fix to use lower-case string type

* Add another namespace lint

* Fix to not use plus on possibly non-string values

.env.development

@@ -1,5 +1,6 @@
 NODE_ENV=development
 DEV=true
+
 VITE_KC_API_WS_MODELING_URL=wss://api.dev.zoo.dev/ws/modeling/commands
 VITE_KC_API_BASE_URL=https://api.dev.zoo.dev
 VITE_KC_SITE_BASE_URL=https://dev.zoo.dev
@@ -8,3 +9,5 @@ VITE_KC_SKIP_AUTH=false
 VITE_KC_CONNECTION_TIMEOUT_MS=5000
 # ONLY add your token in .env.development.local if you want to skip auth, otherwise this token takes precedence!
 #VITE_KC_DEV_TOKEN="your token from dev.zoo.dev should go in .env.development.local"
+
+FAIL_ON_CONSOLE_ERRORS=true

.envrc

@@ -1 +1,13 @@
+# Load optional shared environment variables
+source_up_if_exists
+
+# Load default development environment variables
+dotenv .env.development
+
+# Load optional environment variables overrides
+dotenv_if_exists .env.development.local
+
+# Load optional testing environment variables
+dotenv_if_exists e2e/playwright/playwright-secrets.env
+
 use flake .

.eslintrc

@@ -20,8 +20,26 @@
       "plugin:react-hooks/recommended"
     ],
     "rules": {
+      "no-array-constructor": "off", // This is wrong; use the @typescript-eslint one instead.
+      "@typescript-eslint/no-array-constructor": "error",
+      "@typescript-eslint/no-array-delete": "error",
+      "@typescript-eslint/no-duplicate-enum-values": "error",
+      "@typescript-eslint/no-duplicate-type-constituents": "error",
+      "@typescript-eslint/no-empty-object-type": "error",
+      "@typescript-eslint/no-extra-non-null-assertion": "error",
       "@typescript-eslint/no-floating-promises": "error",
+      "@typescript-eslint/no-for-in-array": "error",
+      "no-implied-eval": "off", // This is wrong; use the @typescript-eslint one instead.
+      "@typescript-eslint/no-implied-eval": "error",
+      "@typescript-eslint/no-misused-new": "error",
       "@typescript-eslint/no-misused-promises": "error",
+      "@typescript-eslint/no-namespace": "error",
+      "@typescript-eslint/no-non-null-asserted-optional-chain": "error",
+      "@typescript-eslint/no-redundant-type-constituents": "error",
+      "@typescript-eslint/no-this-alias": "warn",
+      "@typescript-eslint/no-unnecessary-type-assertion": "error",
+      "@typescript-eslint/no-unnecessary-type-constraint": "error",
+      "no-unused-vars": "off", // This is wrong; use the @typescript-eslint one instead.
       "@typescript-eslint/no-unused-vars": ["error", {
         "varsIgnorePattern": "^_",
         "argsIgnorePattern": "^_",
@@ -29,6 +47,13 @@
         "vars": "all",
         "args": "none"
       }],
+      "@typescript-eslint/no-unsafe-unary-minus": "error",
+      "@typescript-eslint/no-wrapper-object-types": "error",
+      "no-throw-literal": "off", // Use @typescript-eslint/only-throw-error instead.
+      "@typescript-eslint/only-throw-error": "error",
+      "@typescript-eslint/prefer-as-const": "warn",
+      "@typescript-eslint/prefer-namespace-keyword": "error",
+      "@typescript-eslint/restrict-plus-operands": "error",
       "jsx-a11y/click-events-have-key-events": "off",
       "jsx-a11y/no-autofocus": "off",
       "jsx-a11y/no-noninteractive-element-interactions": "off",
@@ -37,7 +62,7 @@
         {
           "name": "isNaN",
           "message": "Use Number.isNaN() instead."
-        },
+        }
       ],
       "no-restricted-syntax": [
         "error",
@@ -51,7 +76,7 @@
         "never"
       ],
       "react-hooks/exhaustive-deps": "off",
-      "suggest-no-throw/suggest-no-throw": "warn",
+      "suggest-no-throw/suggest-no-throw": "error"
     },
     "overrides": [
       {
@@ -71,7 +96,7 @@
           "plugin:testing-library/react"
         ],
         "rules": {
-          "suggest-no-throw/suggest-no-throw": "off",
+          "suggest-no-throw/suggest-no-throw": "off"
         }
       }
     ]

.github/actions/github-release/package.json

@@ -4,7 +4,7 @@
   "main": "main.js",
   "dependencies": {
     "@actions/core": "^1.6",
-    "@actions/github": "^5.0",
+    "@actions/github": "^6.0",
-    "glob": "^7.1.5"
+    "glob": "^11.0.1"
   }
 }

.github/ci-cd-scripts/playwright-electron.sh

@@ -4,27 +4,27 @@
 set -euo pipefail
 
 if [[ ! -f "test-results/.last-run.json" ]]; then
-    # if no last run artifact, than run plawright normally
+    # If no last run artifact, than run Playwright normally
     echo "run playwright normally"
-        if [[ "$3" == *ubuntu* ]]; then
+    if [[ "$3" == *ubuntu* ]]; then
-            xvfb-run --auto-servernum --server-args="-screen 0 1280x960x24" -- yarn test:playwright:electron:ubuntu -- --shard=$1/$2 || true
+        xvfb-run --auto-servernum --server-args="-screen 0 1280x960x24" -- yarn test:playwright:electron:ubuntu -- --shard=$1/$2 || true
-        elif [[ "$3" == *windows* ]]; then
+    elif [[ "$3" == *windows* ]]; then
-            yarn test:playwright:electron:windows -- --shard=$1/$2 || true
+        yarn test:playwright:electron:windows -- --shard=$1/$2 || true
-        elif [[ "$3" == *macos* ]]; then
+    elif [[ "$3" == *macos* ]]; then
-            yarn test:playwright:electron:macos  -- --shard=$1/$2 || true
+        yarn test:playwright:electron:macos  -- --shard=$1/$2 || true
-        else
+    else
-            echo "Do not run playwright. Unable to detect os runtime."
+        echo "Do not run Playwright. Unable to detect os runtime."
-            exit 1
+        exit 1
-        fi
+    fi
-        # # send to axiom
+    # Log failures for Axiom to pick up
-        node playwrightProcess.mjs | tee /tmp/github-actions.log > /dev/null 2>&1
+    node playwrightProcess.mjs > /tmp/github-actions.log
 fi
 
 retry=1
-max_retrys=1
+max_retries=1
 
-# retry failed tests, doing our own retries because using inbuilt playwright retries causes connection issues
+# Retry failed tests, doing our own retries because using inbuilt Playwright retries causes connection issues
-while [[ $retry -le $max_retrys ]]; do
+while [[ $retry -le $max_retries ]]; do
     if [[ -f "test-results/.last-run.json" ]]; then
         failed_tests=$(jq '.failedTests | length' test-results/.last-run.json)
         if [[ $failed_tests -gt 0 ]]; then
@@ -40,8 +40,8 @@ while [[ $retry -le $max_retrys ]]; do
                 echo "Do not run playwright. Unable to detect os runtime."
                 exit 1
             fi
-            # send to axiom
+            # Log failures for Axiom to pick up
-            node playwrightProcess.mjs | tee /tmp/github-actions.log > /dev/null 2>&1
+            node playwrightProcess.mjs > /tmp/github-actions.log
             retry=$((retry + 1))
         else
             echo "retried=false" >>$GITHUB_OUTPUT
@@ -58,7 +58,7 @@ echo "retried=false" >>$GITHUB_OUTPUT
 if [[ -f "test-results/.last-run.json" ]]; then
     failed_tests=$(jq '.failedTests | length' test-results/.last-run.json)
     if [[ $failed_tests -gt 0 ]]; then
-        # if it still fails after 3 retrys, then fail the job
+        # If it still fails after 3 retries, then fail the job
         exit 1
     fi
 fi

.github/dependabot.yml

@@ -230,39 +230,6 @@ updates:
       update-types:
       - minor
       - patch
-- package-ecosystem: pip
-  directory: /public/kcl-samples
-  schedule:
-    interval: weekly
-    day: monday
-    time: '03:00'
-    timezone: America/Los_Angeles
-  open-pull-requests-limit: 5
-  reviewers:
-  - adamchalmers
-  - franknoirot
-  - irev-dev
-  - jessfraz
-  groups:
-    security:
-      applies-to: security-updates
-      update-types:
-      - major
-      - minor
-      - patch
-    patch:
-      applies-to: version-updates
-      update-types:
-      - patch
-    major:
-      applies-to: version-updates
-      update-types:
-      - major
-    minor:
-      applies-to: version-updates
-      update-types:
-      - minor
-      - patch
 - package-ecosystem: pip
   directory: /rust/kcl-python-bindings
   schedule:

.github/workflows/build-and-store-wasm.yml

@@ -24,7 +24,7 @@ jobs:
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
           cache: false # Configured below.
-      - uses: taiki-e/install-action@955a6ff1416eae278c9f833008a9beb4b7f9afe3
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
       - name: Rust Cache

.github/workflows/build-apps.yml

@@ -77,7 +77,7 @@ jobs:
         with:
           cache: false # Configured below.
 
-      - uses: taiki-e/install-action@955a6ff1416eae278c9f833008a9beb4b7f9afe3
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         if: ${{ steps.wasm.outputs.should-build-wasm == 'true' }}
         with:
           tool: wasm-pack

.github/workflows/cargo-test.yml

@@ -100,9 +100,14 @@ jobs:
         shell: bash
         run: |
           set -euo pipefail
-          cd rust
+          pushd rust
           just overwrite-sim-test kcl_samples
-          git add kcl-lib/tests
+          popd
+          git add \
+            rust/kcl-lib/tests \
+            public/kcl-samples/manifest.json \
+            public/kcl-samples/README.md \
+            public/kcl-samples/screenshots
           git config --local user.email "github-actions[bot]@users.noreply.github.com"
           git config --local user.name "github-actions[bot]"
           git remote set-url origin https://${{ github.actor }}:${{ secrets.GITHUB_TOKEN }}@github.com/${{ github.repository }}.git

.github/workflows/e2e-tests.yml

@@ -1,7 +1,9 @@
 name: E2E Tests
 on:
   push:
-    branches: [ main ]
+    branches:
+      - main
+      - all-e2e # this bypasses `fixme()` using `orRunWhenFullSuiteEnabled()`
   pull_request:
   schedule:
     - cron: 0 * * * *  # hourly
@@ -15,7 +17,6 @@ permissions:
   pull-requests: write
   actions: read
 
-
 jobs:
 
   conditions:
@@ -67,14 +68,16 @@ jobs:
       - name: Display conditions
         shell: bash
         run: |
-          # For debugging purposes.
+          # For debugging purposes
           set -euo pipefail
+          echo "GITHUB_REF: $GITHUB_REF"
+          echo "GITHUB_HEAD_REF: $GITHUB_HEAD_REF"
+          echo "GITHUB_BASE_REF: $GITHUB_BASE_REF"
           echo "significant: ${{ steps.path-changes.outputs.significant }}"
           echo "should-run: ${{ steps.should-run.outputs.should-run }}"
 
-
   prepare-wasm:
-    # seperate job on Ubuntu to build or fetch the wasm blob once on the fastest runner
+    # separate job on Ubuntu to build or fetch the wasm blob once on the fastest runner
     runs-on: runs-on=${{ github.run_id }}/family=i7ie.2xlarge/image=ubuntu22-full-x64
     needs: conditions
     steps:
@@ -137,7 +140,7 @@ jobs:
         with:
           cache: false # Configured below.
 
-      - uses: taiki-e/install-action@955a6ff1416eae278c9f833008a9beb4b7f9afe3
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         if: ${{ needs.conditions.outputs.should-run == 'true' && steps.wasm.outputs.should-build-wasm == 'true' }}
         with:
           tool: wasm-pack
@@ -159,7 +162,6 @@ jobs:
           name: prepared-wasm
           path: |
             rust/kcl-wasm-lib/pkg/kcl_wasm_lib*
-  
 
   snapshots:
     name: playwright:snapshots:ubuntu
@@ -227,10 +229,6 @@ jobs:
           timeout_minutes: 30
           max_attempts: 3
         env:
-          CI: true
-          NODE_ENV: development
-          VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
-          VITE_KC_SKIP_AUTH: true
           token: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
           snapshottoken: ${{ secrets.KITTYCAD_API_TOKEN }}
 
@@ -243,7 +241,7 @@ jobs:
           retention-days: 30
           overwrite: true
 
-      - name: check for changes
+      - name: Check for changes
         if: ${{ needs.conditions.outputs.should-run == 'true' && github.ref != 'refs/heads/main' }}
         shell: bash
         id: git-check
@@ -255,7 +253,8 @@ jobs:
             fi
 
       - name: Commit changes, if any
-        if: ${{ needs.conditions.outputs.should-run == 'true' && steps.git-check.outputs.modified == 'true' }}
+        # TODO: find a more reliable way to detect visual changes
+        if: ${{ false && needs.conditions.outputs.should-run == 'true' && steps.git-check.outputs.modified == 'true' }}
         shell: bash
         run: |
           git add e2e/playwright/snapshot-tests.spec.ts-snapshots e2e/playwright/snapshots
@@ -325,6 +324,7 @@ jobs:
         run: yarn
 
       - name: Cache Playwright Browsers
+        if: needs.conditions.outputs.should-run == 'true'
         uses: actions/cache@v4
         with:
           path: |
@@ -332,20 +332,29 @@ jobs:
           key: ${{ runner.os }}-playwright-${{ hashFiles('yarn.lock') }}
 
       - name: Install Playwright Browsers
+        if: needs.conditions.outputs.should-run == 'true'
         run: yarn playwright install --with-deps
 
       - name: Build web
         if: needs.conditions.outputs.should-run == 'true'
         run: yarn tronb:vite:dev
 
-      - name: Install good sed
+      - name: Install vector
-        if: startsWith(matrix.os, 'macos')
+        if: ${{ needs.conditions.outputs.should-run == 'true' && contains(matrix.os, 'ubuntu') }}
         shell: bash
         run: |
-          brew install gnu-sed
+          curl --proto '=https' --tlsv1.2 -sSfL https://sh.vector.dev > /tmp/vector.sh
-          echo "/opt/homebrew/opt/gnu-sed/libexec/gnubin" >> $GITHUB_PATH
+          chmod +x /tmp/vector.sh
-
+          /tmp/vector.sh -y -no-modify-path
-        # TODO: Add back axiom logs
+          mkdir -p /tmp/vector
+          cp .github/workflows/vector.toml /tmp/vector.toml
+          sed -i "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
+          sed -i "s#GH_ACTIONS_AXIOM_TOKEN#${{secrets.GH_ACTIONS_AXIOM_TOKEN}}#g" /tmp/vector.toml
+          cat /tmp/vector.toml
+          ${HOME}/.vector/bin/vector --config /tmp/vector.toml &
 
       - uses: actions/download-artifact@v4
         if: ${{ needs.conditions.outputs.should-run == 'true' && !cancelled() && (success() || failure()) }}
@@ -364,11 +373,7 @@ jobs:
           timeout_minutes: 45
           max_attempts: 15
         env:
-          CI: true
           FAIL_ON_CONSOLE_ERRORS: true
-          NODE_ENV: development
-          VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
-          VITE_KC_SKIP_AUTH: true
           token: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
 
       - uses: actions/upload-artifact@v4

.github/workflows/kcl-language-server.yml

@@ -376,7 +376,7 @@ jobs:
         with:
           credentials_json: "${{ secrets.GOOGLE_CLOUD_DL_SA }}"
       - name: Set up Cloud SDK
-        uses: google-github-actions/setup-gcloud@v2.1.2
+        uses: google-github-actions/setup-gcloud@v2.1.4
         with:
           project_id: kittycadapi
       - name: "upload files to gcp"

.github/workflows/static-analysis.yml

@@ -28,43 +28,57 @@ jobs:
       - run: yarn fmt-check
 
   yarn-build-wasm:
-    runs-on: ubuntu-22.04
+    # Build the wasm blob once on the fastest runner.
-
+    runs-on: runs-on=${{ github.run_id }}/family=i7ie.2xlarge/image=ubuntu22-full-x64
     steps:
       - uses: actions/checkout@v4
+
       - uses: actions/setup-node@v4
         with:
           node-version-file: '.nvmrc'
           cache: 'yarn'
-      - run: yarn install
+
-      - uses: taiki-e/install-action@955a6ff1416eae278c9f833008a9beb4b7f9afe3
+      - name: Install dependencies
+        run: yarn install
+
+      - name: Use correct Rust toolchain
+        shell: bash
+        run: |
+          [ -e rust-toolchain.toml ] || cp rust/rust-toolchain.toml ./
+
+      - name: Install rust
+        uses: actions-rust-lang/setup-rust-toolchain@v1
+        with:
+          cache: false # Configured below.
+
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
-      - run: yarn build:wasm
 
-  yarn-tsc:
+      - name: Rust Cache
-    runs-on: ubuntu-22.04
+        uses: Swatinem/rust-cache@v2
-
-    steps:
-      - uses: actions/checkout@v4
-      - uses: actions/setup-node@v4
-        with:
-          node-version-file: '.nvmrc'
-          cache: 'yarn'
-      - run: yarn install
-      - run: yarn --cwd ./rust/kcl-language-server --modules-folder node_modules install
-      - uses: Swatinem/rust-cache@v2
         with:
           workspaces: './rust'
 
-      - uses: taiki-e/install-action@955a6ff1416eae278c9f833008a9beb4b7f9afe3
+      - name: Build Wasm
-        with:
+        shell: bash
-          tool: wasm-pack
+        run: yarn build:wasm
-      - run: yarn build:wasm
-      - run: yarn tsc
 
-  yarn-lint:
+      - uses: actions/upload-artifact@v4
-    runs-on: ubuntu-22.04
+        with:
+          name: prepared-wasm
+          path: |
+            rust/kcl-wasm-lib/pkg/kcl_wasm_lib*
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: prepared-ts-rs-bindings
+          path: |
+            rust/kcl-lib/bindings/*
+
+  yarn-tsc:
+    runs-on: ubuntu-latest
+    needs: yarn-build-wasm
 
     steps:
       - uses: actions/checkout@v4
@@ -73,7 +87,53 @@ jobs:
           node-version-file: '.nvmrc'
           cache: 'yarn'
       - run: yarn install
-      - run: yarn --cwd ./rust/kcl-language-server --modules-folder node_modules install
+
+      - name: Download all artifacts
+        uses: actions/download-artifact@v4
+
+      - name: Copy prepared wasm
+        run: |
+          ls -R prepared-wasm
+          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
+          mkdir rust/kcl-wasm-lib/pkg
+          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
+
+      - name: Copy prepared ts-rs bindings
+        run: |
+          ls -R prepared-ts-rs-bindings
+          mkdir rust/kcl-lib/bindings
+          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
+
+      - run: yarn tsc
+
+  yarn-lint:
+    runs-on: ubuntu-latest
+    needs: yarn-build-wasm
+
+    steps:
+      - uses: actions/checkout@v4
+      - uses: actions/setup-node@v4
+        with:
+          node-version-file: '.nvmrc'
+          cache: 'yarn'
+      - run: yarn install
+
+      - name: Download all artifacts
+        uses: actions/download-artifact@v4
+
+      - name: Copy prepared wasm
+        run: |
+          ls -R prepared-wasm
+          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
+          mkdir rust/kcl-wasm-lib/pkg
+          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
+
+      - name: Copy prepared ts-rs bindings
+        run: |
+          ls -R prepared-ts-rs-bindings
+          mkdir rust/kcl-lib/bindings
+          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
+
       - run: yarn lint
 
   python-codespell:
@@ -91,6 +151,7 @@ jobs:
 
   yarn-unit-test-kcl-samples:
     runs-on: ubuntu-latest
+    needs: yarn-build-wasm
     steps:
       - uses: actions/checkout@v4
 
@@ -100,10 +161,25 @@ jobs:
           cache: 'yarn'
 
       - run: yarn install
-      - uses: taiki-e/install-action@955a6ff1416eae278c9f833008a9beb4b7f9afe3
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
-      - run: yarn build:wasm
+
+      - name: Download all artifacts
+        uses: actions/download-artifact@v4
+
+      - name: Copy prepared wasm
+        run: |
+          ls -R prepared-wasm
+          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
+          mkdir rust/kcl-wasm-lib/pkg
+          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
+
+      - name: Copy prepared ts-rs bindings
+        run: |
+          ls -R prepared-ts-rs-bindings
+          mkdir rust/kcl-lib/bindings
+          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
 
       - run: yarn simpleserver:bg
         if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
@@ -120,6 +196,7 @@ jobs:
 
   yarn-unit-test:
     runs-on: ubuntu-latest
+    needs: yarn-build-wasm
     steps:
       - uses: actions/checkout@v4
 
@@ -129,10 +206,25 @@ jobs:
           cache: 'yarn'
 
       - run: yarn install
-      - uses: taiki-e/install-action@955a6ff1416eae278c9f833008a9beb4b7f9afe3
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
-      - run: yarn build:wasm
+
+      - name: Download all artifacts
+        uses: actions/download-artifact@v4
+
+      - name: Copy prepared wasm
+        run: |
+          ls -R prepared-wasm
+          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
+          mkdir rust/kcl-wasm-lib/pkg
+          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
+
+      - name: Copy prepared ts-rs bindings
+        run: |
+          ls -R prepared-ts-rs-bindings
+          mkdir rust/kcl-lib/bindings
+          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
 
       - run: yarn simpleserver:bg
         if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
@@ -141,13 +233,13 @@ jobs:
         if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
         run: yarn playwright install chromium --with-deps
 
-      - name: run unit tests
+      - name: Run unit tests
         if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
         run: xvfb-run -a yarn test:unit
         env:
           VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
 
-      - name: check for changes
+      - name: Check for changes
         if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
         id: git-check
         run: |

.github/workflows/update-dev-branch.yml

@@ -1,5 +1,8 @@
 name: update-dev-branch
 
+# This is used to sync the `dev` branch with the `main` branch to continuously
+# deploy a second instance of the app to Vercel: https://app.dev.zoo.dev
+
 on:
   push:
     branches:
@@ -26,4 +29,4 @@ jobs:
           # reset to main
           git reset --hard origin/main
           # force push it
-          git push -f origin dev
+          git push --force origin dev

.github/workflows/update-e2e-branch.yml

@@ -0,0 +1,45 @@
+name: update-e2e-branch
+
+# This is used to sync the `all-e2e` branch with the `main` branch for the
+# logic in the test utility `orRunWhenFullSuiteEnabled()` that allows all e2e
+# tests to run on a particular branch to analyze failures metrics in Axiom.
+
+on:
+  schedule:
+    - cron: '0 * * * *' # runs every hour
+
+permissions:
+  contents: write
+
+jobs:
+  update-branch:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/create-github-app-token@v1
+        id: app-token
+        with:
+          app-id: ${{ secrets.MODELING_APP_GH_APP_ID }}
+          private-key: ${{ secrets.MODELING_APP_GH_APP_PRIVATE_KEY }}
+          owner: ${{ github.repository_owner }}
+
+      - uses: actions/checkout@v4
+        with:
+          token: ${{ steps.app-token.outputs.token }}
+
+      - name: Sync with main
+        run: |
+          # Create the branch
+          git checkout all-e2e || git checkout -b all-e2e
+
+          # Reset to main
+          git fetch origin
+          git reset --hard origin/main
+
+          # Get a new SHA to prevent overwriting the commit status on main
+          git config --local user.email "github-actions[bot]@users.noreply.github.com"
+          git config --local user.name "github-actions[bot]"
+          git commit --allow-empty --message="[all-e2e] $(git log --max-count=1 --pretty=%B)"
+
+          # Overwrite the branch
+          git remote set-url origin https://x-access-token:${{ steps.app-token.outputs.token }}@github.com/${{ github.repository }}.git
+          git push --force origin all-e2e

.gitignore

@@ -50,6 +50,7 @@ e2e/playwright/**/*.png
 e2e/playwright/export-snapshots/*
 !e2e/playwright/export-snapshots/*.png
 !e2e/playwright/snapshot-tests.spec.ts-snapshots/*.png
+trace.zip
 
 /public/kcl-samples.zip
 /public/kcl-samples/.github

Makefile

@@ -1,12 +1,125 @@
-.PHONY: dev
+.PHONY: all
+all: install build check
 
-KCL_WASM_LIB_FILES := $(wildcard rust/**/*.rs)
+###############################################################################
-TS_SRC := $(wildcard src/**/*.tsx) $(wildcard src/**/*.ts)
+# INSTALL
-XSTATE_TYPEGENS := $(wildcard src/machines/*.typegen.ts)
 
-dev: node_modules public/kcl_wasm_lib_bg.wasm $(XSTATE_TYPEGENS)
+WASM_PACK ?= ~/.cargo/bin/wasm-pack
+
+.PHONY: install
+install: node_modules/.yarn-integrity $(WASM_PACK) ## Install dependencies
+
+node_modules/.yarn-integrity: package.json yarn.lock
+	yarn install
+	@ touch $@
+
+$(WASM_PACK):
+	yarn install:rust
+	yarn install:wasm-pack:sh
+
+###############################################################################
+# BUILD
+
+CARGO_SOURCES := rust/.cargo/config.toml $(wildcard rust/Cargo.*) $(wildcard rust/**/Cargo.*)
+RUST_SOURCES := $(wildcard rust/**/*.rs)
+
+REACT_SOURCES := $(wildcard src/*.tsx) $(wildcard src/**/*.tsx)
+TYPESCRIPT_SOURCES := tsconfig.* $(wildcard src/*.ts) $(wildcard src/**/*.ts)
+VITE_SOURCES := $(wildcard vite.*) $(wildcard vite/**/*.tsx)
+
+.PHONY: build
+build: build-web build-desktop
+
+.PHONY: build-web
+build-web: public/kcl_wasm_lib_bg.wasm build/index.html
+
+.PHONY: build-desktop
+build-desktop: public/kcl_wasm_lib_bg.wasm .vite/build/main.js
+
+public/kcl_wasm_lib_bg.wasm: $(CARGO_SOURCES)$(RUST_SOURCES)
+	yarn build:wasm:dev
+
+build/index.html: $(REACT_SOURCES) $(TYPESCRIPT_SOURCES) $(VITE_SOURCES)
+	yarn build:local
+
+.vite/build/main.js: $(REACT_SOURCES) $(TYPESCRIPT_SOURCES) $(VITE_SOURCES)
+	yarn tronb:vite:dev
+
+###############################################################################
+# CHECK
+
+.PHONY: check
+check: format lint
+
+.PHONY: format
+format: install ## Format the code
+	yarn fmt
+
+.PHONY: lint
+lint: install ## Lint the code
+	yarn tsc
+	yarn lint
+
+###############################################################################
+# RUN
+
+.PHONY: run
+run: run-web
+
+.PHONY: run-web
+run-web: install build-web ## Start the web app
 	yarn start
 
+.PHONY: run-desktop
+run-desktop: install build-desktop ## Start the desktop app
+	yarn tron:start
+
+###############################################################################
+# TEST
+
+E2E_WORKERS ?= 1
+E2E_FAILURES ?= 1
+E2E_GREP ?= ""
+
+.PHONY: test
+test: test-unit test-e2e
+
+.PHONY: test-unit
+test-unit: install ## Run the unit tests
+	@ curl -fs localhost:3000 >/dev/null || ( echo "Error: localhost:3000 not available, 'make run-web' first" && exit 1 )
+	yarn test:unit
+
+.PHONY: test-e2e
+test-e2e: test-e2e-desktop
+
+.PHONY: test-e2e-web
+test-e2e-web: install build-web ## Run the web e2e tests
+	@ curl -fs localhost:3000 >/dev/null || ( echo "Error: localhost:3000 not available, 'make run-web' first" && exit 1 )
+	yarn chrome:test --headed --workers=$(E2E_WORKERS) --max-failures=$(E2E_FAILURES) --grep=$(E2E_GREP)
+
+.PHONY: test-e2e-desktop
+test-e2e-desktop: install build-desktop ## Run the desktop e2e tests
+	yarn test:playwright:electron --workers=$(E2E_WORKERS) --max-failures=$(E2E_FAILURES) --grep="$(E2E_GREP)"
+
+###############################################################################
+# CLEAN
+
+.PHONY: clean
+clean: ## Delete all artifacts
+	rm -rf .vite/ build/
+	rm -rf trace.zip playwright-report/ test-results/
+	rm -rf public/kcl_wasm_lib_bg.wasm
+	rm -rf rust/*/bindings/ rust/*/pkg/ rust/target/
+	rm -rf node_modules/ rust/*/node_modules/
+
+.PHONY: help
+help: install
+	@ grep -E '^[^[:space:]]+:.*## .*$$' $(MAKEFILE_LIST) | awk 'BEGIN {FS = ":.*?## "}; {printf "\033[36m%-30s\033[0m %s\n", $$1, $$2}'
+
+.DEFAULT_GOAL := help
+
+###############################################################################
+
 # I'm sorry this is so specific to my setup you may as well ignore this.
 # This is so you don't have to deal with electron windows popping up constantly.
 # It should work for you other Linux users.
@@ -14,12 +127,3 @@ lee-electron-test:
 	Xephyr -br -ac -noreset -screen 1200x500 :2 &
 	DISPLAY=:2 NODE_ENV=development PW_TEST_CONNECT_WS_ENDPOINT=ws://127.0.0.1:4444/ yarn tron:test -g "when using the file tree"
 	killall Xephyr
-
-$(XSTATE_TYPEGENS): $(TS_SRC)
-	yarn xstate typegen 'src/**/*.ts?(x)'
-
-public/kcl_wasm_lib_bg.wasm: $(KCL_WASM_LIB_FILES)
-	yarn build:wasm
-
-node_modules: package.json yarn.lock
-	yarn install

docs/kcl/abs.md

@@ -33,7 +33,7 @@ abs(num: number): number
 ```js
 myAngle = -120
 
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [8, 0])
   |> angledLine({ angle = abs(myAngle), length = 5 }, %)

docs/kcl/acos.md

@@ -31,7 +31,7 @@ acos(num: number): number
 ### Examples
 
 ```js
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
        angle = toDegrees(acos(0.5)),

docs/kcl/angleToMatchLengthX.md

@@ -33,7 +33,7 @@ angleToMatchLengthX(
 ### Examples
 
 ```js
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [2, 5], tag = $seg01)
   |> angledLineToX([-angleToMatchLengthX(seg01, 7, %), 10], %)

docs/kcl/angleToMatchLengthY.md

@@ -33,7 +33,7 @@ angleToMatchLengthY(
 ### Examples
 
 ```js
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [1, 2], tag = $seg01)
   |> angledLine({

docs/kcl/appearance.md

@@ -36,7 +36,7 @@ appearance(
 
 ```js
 // Add color to an extruded solid.
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(endAbsolute = [10, 0])
   |> line(endAbsolute = [0, 10])
@@ -52,7 +52,7 @@ example = extrude(exampleSketch, length = 5)
 
 ```js
 // Add color to a revolved solid.
-sketch001 = startSketchOn('XY')
+sketch001 = startSketchOn(XY)
   |> circle(center = [15, 0], radius = 5)
   |> revolve(angle = 360, axis = 'y')
   |> appearance(color = '#ff0000', metalness = 90, roughness = 90)
@@ -63,7 +63,7 @@ sketch001 = startSketchOn('XY')
 ```js
 // Add color to different solids.
 fn cube(center) {
-  return startSketchOn('XY')
+  return startSketchOn(XY)
     |> startProfileAt([center[0] - 10, center[1] - 10], %)
     |> line(endAbsolute = [center[0] + 10, center[1] - 10])
     |> line(endAbsolute = [center[0] + 10, center[1] + 10])
@@ -95,7 +95,7 @@ appearance(
 ```js
 // You can set the appearance before or after you shell it will yield the same result.
 // This example shows setting the appearance _after_ the shell.
-firstSketch = startSketchOn('XY')
+firstSketch = startSketchOn(XY)
   |> startProfileAt([-12, 12], %)
   |> line(end = [24, 0])
   |> line(end = [0, -24])
@@ -112,7 +112,7 @@ shell(firstSketch, faces = ['end'], thickness = 0.25)
 ```js
 // You can set the appearance before or after you shell it will yield the same result.
 // This example shows setting the appearance _before_ the shell.
-firstSketch = startSketchOn('XY')
+firstSketch = startSketchOn(XY)
   |> startProfileAt([-12, 12], %)
   |> line(end = [24, 0])
   |> line(end = [0, -24])
@@ -129,7 +129,7 @@ shell(firstSketch, faces = ['end'], thickness = 0.25)
 ```js
 // Setting the appearance of a 3D pattern can be done _before_ or _after_ the pattern.
 // This example shows _before_ the pattern.
-exampleSketch = startSketchOn('XZ')
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [0, 2])
   |> line(end = [3, 1])
@@ -146,7 +146,7 @@ example = extrude(exampleSketch, length = 1)
 ```js
 // Setting the appearance of a 3D pattern can be done _before_ or _after_ the pattern.
 // This example shows _after_ the pattern.
-exampleSketch = startSketchOn('XZ')
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [0, 2])
   |> line(end = [3, 1])
@@ -162,7 +162,7 @@ example = extrude(exampleSketch, length = 1)
 
 ```js
 // Color the result of a 2D pattern that was extruded.
-exampleSketch = startSketchOn('XZ')
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([.5, 25], %)
   |> line(end = [0, 5])
   |> line(end = [-1, 0])
@@ -184,9 +184,8 @@ example = extrude(exampleSketch, length = 1)
 ```js
 // Color the result of a sweep.
 
-
 // Create a path for the sweep.
-sweepPath = startSketchOn('XZ')
+sweepPath = startSketchOn(XZ)
   |> startProfileAt([0.05, 0.05], %)
   |> line(end = [0, 7])
   |> tangentialArc({ offset = 90, radius = 5 }, %)
@@ -194,10 +193,10 @@ sweepPath = startSketchOn('XZ')
   |> tangentialArc({ offset = -90, radius = 5 }, %)
   |> line(end = [0, 7])
 
-pipeHole = startSketchOn('XY')
+pipeHole = startSketchOn(XY)
   |> circle(center = [0, 0], radius = 1.5)
 
-sweepSketch = startSketchOn('XY')
+sweepSketch = startSketchOn(XY)
   |> circle(center = [0, 0], radius = 2)
   |> hole(pipeHole, %)
   |> sweep(path = sweepPath)

docs/kcl/asin.md

@@ -31,7 +31,7 @@ asin(num: number): number
 ### Examples
 
 ```js
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
        angle = toDegrees(asin(0.5)),

docs/kcl/atan.md

@@ -31,7 +31,7 @@ atan(num: number): number
 ### Examples
 
 ```js
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
        angle = toDegrees(atan(1.25)),

docs/kcl/atan2.md

@@ -35,7 +35,7 @@ atan2(
 ### Examples
 
 ```js
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
        angle = toDegrees(atan2(1.25, 2)),

docs/kcl/ceil.md

@@ -31,7 +31,7 @@ ceil(num: number): number
 ### Examples
 
 ```js
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(endAbsolute = [12, 10])
   |> line(end = [ceil(7.02986), 0])

docs/kcl/chamfer.md

@@ -41,7 +41,7 @@ length = 10
 thickness = 1
 chamferLength = 2
 
-mountingPlateSketch = startSketchOn("XY")
+mountingPlateSketch = startSketchOn(XY)
   |> startProfileAt([-width / 2, -length / 2], %)
   |> line(endAbsolute = [width / 2, -length / 2], tag = $edge1)
   |> line(endAbsolute = [width / 2, length / 2], tag = $edge2)
@@ -65,7 +65,7 @@ mountingPlate = extrude(mountingPlateSketch, length = thickness)
 ```js
 // Sketch on the face of a chamfer.
 fn cube(pos, scale) {
-  sg = startSketchOn('XY')
+  sg = startSketchOn(XY)
     |> startProfileAt(pos, %)
     |> line(end = [0, scale])
     |> line(end = [scale, 0])

docs/kcl/circleThreePoint.md

@@ -10,10 +10,10 @@ Construct a circle derived from 3 points.
 
 ```js
 circleThreePoint(
+  sketchSurfaceOrGroup: SketchOrSurface,
   p1: [number],
   p2: [number],
   p3: [number],
-  sketchSurfaceOrGroup: SketchOrSurface,
   tag?: TagDeclarator,
 ): Sketch
 ```
@@ -23,10 +23,10 @@ circleThreePoint(
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
+| `sketchSurfaceOrGroup` | [`SketchOrSurface`](/docs/kcl/types/SketchOrSurface) | Plane or surface to sketch on. | Yes |
 | `p1` | [`[number]`](/docs/kcl/types/number) | 1st point to derive the circle. | Yes |
 | `p2` | [`[number]`](/docs/kcl/types/number) | 2nd point to derive the circle. | Yes |
 | `p3` | [`[number]`](/docs/kcl/types/number) | 3rd point to derive the circle. | Yes |
-| `sketchSurfaceOrGroup` | [`SketchOrSurface`](/docs/kcl/types/SketchOrSurface) | Plane or surface to sketch on. | Yes |
 | [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Identifier for the circle to reference elsewhere. | No |
 
 ### Returns
@@ -37,7 +37,7 @@ circleThreePoint(
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XY")
+exampleSketch = startSketchOn(XY)
   |> circleThreePoint(p1 = [10, 10], p2 = [20, 8], p3 = [15, 5])
   |> extrude(length = 5)
 ```

docs/kcl/consts.md

@@ -9,13 +9,9 @@ layout: manual
 
 ### `std`
 
-- [`HALF_TURN`](/docs/kcl/consts/std-HALF_TURN)
-- [`QUARTER_TURN`](/docs/kcl/consts/std-QUARTER_TURN)
-- [`THREE_QUARTER_TURN`](/docs/kcl/consts/std-THREE_QUARTER_TURN)
 - [`XY`](/docs/kcl/consts/std-XY)
 - [`XZ`](/docs/kcl/consts/std-XZ)
 - [`YZ`](/docs/kcl/consts/std-YZ)
-- [`ZERO`](/docs/kcl/consts/std-ZERO)
 
 ### `std::math`
 
@@ -23,3 +19,10 @@ layout: manual
 - [`PI`](/docs/kcl/consts/std-math-PI)
 - [`TAU`](/docs/kcl/consts/std-math-TAU)
 
+### `std::turns`
+
+- [`HALF_TURN`](/docs/kcl/consts/std-turns-HALF_TURN)
+- [`QUARTER_TURN`](/docs/kcl/consts/std-turns-QUARTER_TURN)
+- [`THREE_QUARTER_TURN`](/docs/kcl/consts/std-turns-THREE_QUARTER_TURN)
+- [`ZERO`](/docs/kcl/consts/std-turns-ZERO)
+

docs/kcl/consts/std-HALF_TURN.md

@@ -1,15 +0,0 @@
----
-title: "std::HALF_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::HALF_TURN: number(deg) = 180deg
-```
-
-

docs/kcl/consts/std-QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "std::QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::QUARTER_TURN: number(deg) = 90deg
-```
-
-

docs/kcl/consts/std-THREE_QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "std::THREE_QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::THREE_QUARTER_TURN: number(deg) = 270deg
-```
-
-

docs/kcl/consts/std-ZERO.md

@@ -1,15 +0,0 @@
----
-title: "std::ZERO"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::ZERO: number = 0
-```
-
-

docs/kcl/consts/std-math-E.md

@@ -15,7 +15,7 @@ std::math::E: number = 2.71828182845904523536028747135266250_
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
     angle = 30,

docs/kcl/consts/std-math-PI.md

@@ -17,7 +17,7 @@ std::math::PI: number = 3.14159265358979323846264338327950288_
 ```js
 circumference = 70
 
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
  |> circle(center = [0, 0], radius = circumference/ (2 * PI))
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/consts/std-math-TAU.md

@@ -15,7 +15,7 @@ std::math::TAU: number = 6.28318530717958647692528676655900577_
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
     angle = 50,

docs/kcl/consts/std-turns-HALF_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "std::turns::HALF_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::turns::HALF_TURN: number(deg) = 180deg
+```
+
+

docs/kcl/consts/std-turns-QUARTER_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "std::turns::QUARTER_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::turns::QUARTER_TURN: number(deg) = 90deg
+```
+
+

docs/kcl/consts/std-turns-THREE_QUARTER_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "std::turns::THREE_QUARTER_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::turns::THREE_QUARTER_TURN: number(deg) = 270deg
+```
+
+

docs/kcl/consts/std-turns-ZERO.md

@@ -0,0 +1,15 @@
+---
+title: "std::turns::ZERO"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::turns::ZERO: number = 0
+```
+
+

docs/kcl/e.md

@@ -28,7 +28,7 @@ e(): number
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({ angle = 30, length = 2 * e() ^ 2 }, %)
   |> yLine(endAbsolute = 0)

docs/kcl/fillet.md

@@ -42,7 +42,7 @@ length = 10
 thickness = 1
 filletRadius = 2
 
-mountingPlateSketch = startSketchOn("XY")
+mountingPlateSketch = startSketchOn(XY)
   |> startProfileAt([-width / 2, -length / 2], %)
   |> line(endAbsolute = [width / 2, -length / 2], tag = $edge1)
   |> line(endAbsolute = [width / 2, length / 2], tag = $edge2)
@@ -69,7 +69,7 @@ length = 10
 thickness = 1
 filletRadius = 1
 
-mountingPlateSketch = startSketchOn("XY")
+mountingPlateSketch = startSketchOn(XY)
   |> startProfileAt([-width / 2, -length / 2], %)
   |> line(endAbsolute = [width / 2, -length / 2], tag = $edge1)
   |> line(endAbsolute = [width / 2, length / 2], tag = $edge2)

docs/kcl/floor.md

@@ -31,7 +31,7 @@ floor(num: number): number
 ### Examples
 
 ```js
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(endAbsolute = [12, 10])
   |> line(end = [floor(7.02986), 0])

docs/kcl/getNextAdjacentEdge.md

@@ -27,7 +27,7 @@ getNextAdjacentEdge(tag: TagIdentifier): Uuid
 ### Examples
 
 ```js
-exampleSketch = startSketchOn('XZ')
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
   |> angledLine({ angle = 60, length = 10 }, %)

docs/kcl/getOppositeEdge.md

@@ -27,7 +27,7 @@ getOppositeEdge(tag: TagIdentifier): Uuid
 ### Examples
 
 ```js
-exampleSketch = startSketchOn('XZ')
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
   |> angledLine({ angle = 60, length = 10 }, %)

docs/kcl/getPreviousAdjacentEdge.md

@@ -27,7 +27,7 @@ getPreviousAdjacentEdge(tag: TagIdentifier): Uuid
 ### Examples
 
 ```js
-exampleSketch = startSketchOn('XZ')
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
   |> angledLine({ angle = 60, length = 10 }, %)

docs/kcl/hollow.md

@@ -32,7 +32,7 @@ hollow(
 
 ```js
 // Hollow a basic sketch.
-firstSketch = startSketchOn('XY')
+firstSketch = startSketchOn(XY)
   |> startProfileAt([-12, 12], %)
   |> line(end = [24, 0])
   |> line(end = [0, -24])
@@ -46,7 +46,7 @@ firstSketch = startSketchOn('XY')
 
 ```js
 // Hollow a basic sketch.
-firstSketch = startSketchOn('-XZ')
+firstSketch = startSketchOn(-XZ)
   |> startProfileAt([-12, 12], %)
   |> line(end = [24, 0])
   |> line(end = [0, -24])
@@ -61,7 +61,7 @@ firstSketch = startSketchOn('-XZ')
 ```js
 // Hollow a sketch on face object.
 size = 100
-case = startSketchOn('-XZ')
+case = startSketchOn(-XZ)
   |> startProfileAt([-size, -size], %)
   |> line(end = [2 * size, 0])
   |> line(end = [0, 2 * size])

docs/kcl/import.md

@@ -69,7 +69,7 @@ model = import("tests/inputs/cube.step")
 ```js
 import height, buildSketch from "common.kcl"
 
-plane = 'XZ'
+plane = XZ
 margin = 2
 s1 = buildSketch(plane, [0, 0])
 s2 = buildSketch(plane, [0, height() + margin])

docs/kcl/index.md

@@ -22,16 +22,16 @@ layout: manual
   * [`string`](kcl/types/string)
   * [`tag`](kcl/types/tag)
 * **std**
-  * [`HALF_TURN`](kcl/consts/std-HALF_TURN)
+  * [`Face`](kcl/types/Face)
+  * [`Helix`](kcl/types/Helix)
   * [`Plane`](kcl/types/Plane)
-  * [`QUARTER_TURN`](kcl/consts/std-QUARTER_TURN)
+  * [`Point2d`](kcl/types/Point2d)
+  * [`Point3d`](kcl/types/Point3d)
   * [`Sketch`](kcl/types/Sketch)
   * [`Solid`](kcl/types/Solid)
-  * [`THREE_QUARTER_TURN`](kcl/consts/std-THREE_QUARTER_TURN)
   * [`XY`](kcl/consts/std-XY)
   * [`XZ`](kcl/consts/std-XZ)
   * [`YZ`](kcl/consts/std-YZ)
-  * [`ZERO`](kcl/consts/std-ZERO)
   * [`abs`](kcl/abs)
   * [`acos`](kcl/acos)
   * [`angleToMatchLengthX`](kcl/angleToMatchLengthX)
@@ -57,7 +57,6 @@ layout: manual
   * [`bezierCurve`](kcl/bezierCurve)
   * [`ceil`](kcl/ceil)
   * [`chamfer`](kcl/chamfer)
-  * [`circle`](kcl/circle)
   * [`circleThreePoint`](kcl/circleThreePoint)
   * [`close`](kcl/close)
   * [`cm`](kcl/cm)
@@ -65,11 +64,11 @@ layout: manual
   * [`fillet`](kcl/fillet)
   * [`floor`](kcl/floor)
   * [`ft`](kcl/ft)
+  * [`getCommonEdge`](kcl/getCommonEdge)
   * [`getNextAdjacentEdge`](kcl/getNextAdjacentEdge)
   * [`getOppositeEdge`](kcl/getOppositeEdge)
   * [`getPreviousAdjacentEdge`](kcl/getPreviousAdjacentEdge)
   * [`helix`](kcl/helix)
-  * [`helixRevolutions`](kcl/helixRevolutions)
   * [`hole`](kcl/hole)
   * [`hollow`](kcl/hollow)
   * [`inch`](kcl/inch)
@@ -141,3 +140,10 @@ layout: manual
   * [`cos`](kcl/std-math-cos)
   * [`sin`](kcl/std-math-sin)
   * [`tan`](kcl/std-math-tan)
+* **std::sketch**
+  * [`circle`](kcl/std-sketch-circle)
+* **std::turns**
+  * [`turns::HALF_TURN`](kcl/consts/std-turns-HALF_TURN)
+  * [`turns::QUARTER_TURN`](kcl/consts/std-turns-QUARTER_TURN)
+  * [`turns::THREE_QUARTER_TURN`](kcl/consts/std-turns-THREE_QUARTER_TURN)
+  * [`turns::ZERO`](kcl/consts/std-turns-ZERO)

docs/kcl/int.md

@@ -36,7 +36,7 @@ int(num: number): number
 n = int(ceil(5 / 2))
 assertEqual(n, 3, 0.0001, "5/2 = 2.5, rounded up makes 3")
 // Draw n cylinders.
-startSketchOn('XZ')
+startSketchOn(XZ)
   |> circle(center = [0, 0], radius = 2)
   |> extrude(length = 5)
   |> patternTransform(

docs/kcl/lastSegX.md

@@ -27,7 +27,7 @@ lastSegX(sketch: Sketch): number
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [5, 0])
   |> line(end = [20, 5])

docs/kcl/lastSegY.md

@@ -27,7 +27,7 @@ lastSegY(sketch: Sketch): number
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [5, 0])
   |> line(end = [20, 5])

docs/kcl/ln.md

@@ -31,7 +31,7 @@ ln(num: number): number
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [ln(100), 15])
   |> line(end = [5, -6])

docs/kcl/loft.md

@@ -42,7 +42,7 @@ loft(
 
 ```js
 // Loft a square and a triangle.
-squareSketch = startSketchOn('XY')
+squareSketch = startSketchOn(XY)
   |> startProfileAt([-100, 200], %)
   |> line(end = [200, 0])
   |> line(end = [0, -200])
@@ -50,7 +50,7 @@ squareSketch = startSketchOn('XY')
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
-triangleSketch = startSketchOn(offsetPlane('XY', offset = 75))
+triangleSketch = startSketchOn(offsetPlane(XY, offset = 75))
   |> startProfileAt([0, 125], %)
   |> line(end = [-15, -30])
   |> line(end = [30, 0])
@@ -64,7 +64,7 @@ loft([squareSketch, triangleSketch])
 
 ```js
 // Loft a square, a circle, and another circle.
-squareSketch = startSketchOn('XY')
+squareSketch = startSketchOn(XY)
   |> startProfileAt([-100, 200], %)
   |> line(end = [200, 0])
   |> line(end = [0, -200])
@@ -72,10 +72,10 @@ squareSketch = startSketchOn('XY')
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
-circleSketch0 = startSketchOn(offsetPlane('XY', offset = 75))
+circleSketch0 = startSketchOn(offsetPlane(XY, offset = 75))
   |> circle(center = [0, 100], radius = 50)
 
-circleSketch1 = startSketchOn(offsetPlane('XY', offset = 150))
+circleSketch1 = startSketchOn(offsetPlane(XY, offset = 150))
   |> circle(center = [0, 100], radius = 20)
 
 loft([
@@ -89,7 +89,7 @@ loft([
 
 ```js
 // Loft a square, a circle, and another circle with options.
-squareSketch = startSketchOn('XY')
+squareSketch = startSketchOn(XY)
   |> startProfileAt([-100, 200], %)
   |> line(end = [200, 0])
   |> line(end = [0, -200])
@@ -97,10 +97,10 @@ squareSketch = startSketchOn('XY')
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
-circleSketch0 = startSketchOn(offsetPlane('XY', offset = 75))
+circleSketch0 = startSketchOn(offsetPlane(XY, offset = 75))
   |> circle(center = [0, 100], radius = 50)
 
-circleSketch1 = startSketchOn(offsetPlane('XY', offset = 150))
+circleSketch1 = startSketchOn(offsetPlane(XY, offset = 150))
   |> circle(center = [0, 100], radius = 20)
 
 loft(

docs/kcl/log.md

@@ -35,7 +35,7 @@ log(
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [log(100, 5), 0])
   |> line(end = [5, 8])

docs/kcl/log10.md

@@ -31,7 +31,7 @@ log10(num: number): number
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [log10(100), 0])
   |> line(end = [5, 8])

docs/kcl/log2.md

@@ -31,7 +31,7 @@ log2(num: number): number
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [log2(100), 0])
   |> line(end = [5, 8])

docs/kcl/map.md

@@ -33,7 +33,7 @@ map(
 ```js
 r = 10 // radius
 fn drawCircle(id) {
-  return startSketchOn("XY")
+  return startSketchOn(XY)
     |> circle(center = [id * 2 * r, 0], radius = r)
 }
 
@@ -49,7 +49,7 @@ circles = map([1..3], drawCircle)
 r = 10 // radius
 // Call `map`, using an anonymous function instead of a named one.
 circles = map([1..3], fn(id) {
-  return startSketchOn("XY")
+  return startSketchOn(XY)
     |> circle(center = [id * 2 * r, 0], radius = r)
 })
 ```

docs/kcl/max.md

@@ -31,7 +31,7 @@ max(args: [number]): number
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
        angle = 70,

docs/kcl/min.md

@@ -31,7 +31,7 @@ min(args: [number]): number
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
        angle = 70,

docs/kcl/mirror2d.md

@@ -34,7 +34,7 @@ mirror2d(
 
 ```js
 // Mirror an un-closed sketch across the Y axis.
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 10], %)
   |> line(end = [15, 0])
   |> line(end = [-7, -3])
@@ -53,7 +53,7 @@ example = extrude(sketch001, length = 10)
 
 ```js
 // Mirror a un-closed sketch across the Y axis.
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 8.5], %)
   |> line(end = [20, -8.5])
   |> line(end = [-20, -8.5])
@@ -66,11 +66,11 @@ example = extrude(sketch001, length = 10)
 
 ```js
 // Mirror a un-closed sketch across an edge.
-helper001 = startSketchOn('XZ')
+helper001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [0, 10], tag = $edge001)
 
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 8.5], %)
   |> line(end = [20, -8.5])
   |> line(end = [-20, -8.5])
@@ -83,7 +83,7 @@ sketch001 = startSketchOn('XZ')
 
 ```js
 // Mirror an un-closed sketch across a custom axis.
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 8.5], %)
   |> line(end = [20, -8.5])
   |> line(end = [-20, -8.5])

docs/kcl/offsetPlane.md

@@ -32,7 +32,7 @@ offsetPlane(
 
 ```js
 // Loft a square and a circle on the `XY` plane using offset.
-squareSketch = startSketchOn('XY')
+squareSketch = startSketchOn(XY)
   |> startProfileAt([-100, 200], %)
   |> line(end = [200, 0])
   |> line(end = [0, -200])
@@ -40,7 +40,7 @@ squareSketch = startSketchOn('XY')
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
-circleSketch = startSketchOn(offsetPlane('XY', offset = 150))
+circleSketch = startSketchOn(offsetPlane(XY, offset = 150))
   |> circle(center = [0, 100], radius = 50)
 
 loft([squareSketch, circleSketch])
@@ -50,7 +50,7 @@ loft([squareSketch, circleSketch])
 
 ```js
 // Loft a square and a circle on the `XZ` plane using offset.
-squareSketch = startSketchOn('XZ')
+squareSketch = startSketchOn(XZ)
   |> startProfileAt([-100, 200], %)
   |> line(end = [200, 0])
   |> line(end = [0, -200])
@@ -58,7 +58,7 @@ squareSketch = startSketchOn('XZ')
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
-circleSketch = startSketchOn(offsetPlane('XZ', offset = 150))
+circleSketch = startSketchOn(offsetPlane(XZ, offset = 150))
   |> circle(center = [0, 100], radius = 50)
 
 loft([squareSketch, circleSketch])
@@ -68,7 +68,7 @@ loft([squareSketch, circleSketch])
 
 ```js
 // Loft a square and a circle on the `YZ` plane using offset.
-squareSketch = startSketchOn('YZ')
+squareSketch = startSketchOn(YZ)
   |> startProfileAt([-100, 200], %)
   |> line(end = [200, 0])
   |> line(end = [0, -200])
@@ -76,7 +76,7 @@ squareSketch = startSketchOn('YZ')
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
-circleSketch = startSketchOn(offsetPlane('YZ', offset = 150))
+circleSketch = startSketchOn(offsetPlane(YZ, offset = 150))
   |> circle(center = [0, 100], radius = 50)
 
 loft([squareSketch, circleSketch])
@@ -86,7 +86,7 @@ loft([squareSketch, circleSketch])
 
 ```js
 // Loft a square and a circle on the `-XZ` plane using offset.
-squareSketch = startSketchOn('-XZ')
+squareSketch = startSketchOn(-XZ)
   |> startProfileAt([-100, 200], %)
   |> line(end = [200, 0])
   |> line(end = [0, -200])
@@ -94,7 +94,7 @@ squareSketch = startSketchOn('-XZ')
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
-circleSketch = startSketchOn(offsetPlane('-XZ', offset = -150))
+circleSketch = startSketchOn(offsetPlane(-XZ, offset = -150))
   |> circle(center = [0, 100], radius = 50)
 
 loft([squareSketch, circleSketch])
@@ -104,12 +104,12 @@ loft([squareSketch, circleSketch])
 
 ```js
 // A circle on the XY plane
-startSketchOn("XY")
+startSketchOn(XY)
   |> startProfileAt([0, 0], %)
   |> circle(radius = 10, center = [0, 0])
 
 // Triangle on the plane 4 units above
-startSketchOn(offsetPlane("XY", offset = 4))
+startSketchOn(offsetPlane(XY, offset = 4))
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
   |> line(end = [0, 10])

docs/kcl/patternCircular2d.md

@@ -39,7 +39,7 @@ patternCircular2d(
 ### Examples
 
 ```js
-exampleSketch = startSketchOn('XZ')
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([.5, 25], %)
   |> line(end = [0, 5])
   |> line(end = [-1, 0])

docs/kcl/patternCircular3d.md

@@ -41,7 +41,7 @@ patternCircular3d(
 ### Examples
 
 ```js
-exampleSketch = startSketchOn('XZ')
+exampleSketch = startSketchOn(XZ)
   |> circle(center = [0, 0], radius = 1)
 
 example = extrude(exampleSketch, length = -5)

docs/kcl/patternLinear2d.md

@@ -37,7 +37,7 @@ patternLinear2d(
 ### Examples
 
 ```js
-exampleSketch = startSketchOn('XZ')
+exampleSketch = startSketchOn(XZ)
   |> circle(center = [0, 0], radius = 1)
   |> patternLinear2d(axis = [1, 0], instances = 7, distance = 4)
 

docs/kcl/patternLinear3d.md

@@ -37,7 +37,7 @@ patternLinear3d(
 ### Examples
 
 ```js
-exampleSketch = startSketchOn('XZ')
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [0, 2])
   |> line(end = [3, 1])
@@ -53,7 +53,7 @@ example = extrude(exampleSketch, length = 1)
 ```js
 // Pattern a whole sketch on face.
 size = 100
-case = startSketchOn('XY')
+case = startSketchOn(XY)
   |> startProfileAt([-size, -size], %)
   |> line(end = [2 * size, 0])
   |> line(end = [0, 2 * size])
@@ -84,7 +84,7 @@ patternLinear3d(
 ```js
 // Pattern an object on a face.
 size = 100
-case = startSketchOn('XY')
+case = startSketchOn(XY)
   |> startProfileAt([-size, -size], %)
   |> line(end = [2 * size, 0])
   |> line(end = [0, 2 * size])

docs/kcl/patternTransform.md

@@ -67,7 +67,7 @@ fn transform(id) {
 }
 
 // Sketch 4 cylinders.
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> circle(center = [0, 0], radius = 2)
   |> extrude(length = 5)
   |> patternTransform(instances = 4, transform = transform)
@@ -83,7 +83,7 @@ fn transform(id) {
   return { translate = [4 * (1 + id), 0, 0] }
 }
 
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> circle(center = [0, 0], radius = 2)
   |> extrude(length = 5)
   |> patternTransform(instances = 4, transform = transform)
@@ -101,7 +101,7 @@ fn cube(length, center) {
   p2 = [l + x, l + y]
   p3 = [l + x, -l + y]
 
-  return startSketchOn('XY')
+  return startSketchOn(XY)
     |> startProfileAt(p0, %)
     |> line(endAbsolute = p1)
     |> line(endAbsolute = p2)
@@ -139,7 +139,7 @@ fn cube(length, center) {
   p2 = [l + x, l + y]
   p3 = [l + x, -l + y]
 
-  return startSketchOn('XY')
+  return startSketchOn(XY)
     |> startProfileAt(p0, %)
     |> line(endAbsolute = p1)
     |> line(endAbsolute = p2)
@@ -182,7 +182,7 @@ fn transform(replicaId) {
 }
 // Each layer is just a pretty thin cylinder.
 fn layer() {
-  return startSketchOn("XY")
+  return startSketchOn(XY)
     // or some other plane idk
     |> circle(center = [0, 0], radius = 1, tag = $tag1)
     |> extrude(length = h)
@@ -203,7 +203,7 @@ fn transform(i) {
     { rotation = { angle = 45 * i } }
   ]
 }
-startSketchOn('XY')
+startSketchOn(XY)
   |> startProfileAt([0, 0], %)
   |> polygon({
        radius = 10,

docs/kcl/patternTransform2d.md

@@ -41,7 +41,7 @@ fn transform(id) {
 }
 
 // Sketch 4 circles.
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> circle(center = [0, 0], radius = 2)
   |> patternTransform2d(instances = 4, transform = transform)
 ```

docs/kcl/pi.md

@@ -30,7 +30,7 @@ pi(): number
 ```js
 circumference = 70
 
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> circle(center = [0, 0], radius = circumference / (2 * pi()))
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/polar.md

@@ -27,7 +27,7 @@ polar(data: PolarCoordsData): [number]
 ### Examples
 
 ```js
-exampleSketch = startSketchOn('XZ')
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = polar({ angle = 30, length = 5 }), tag = $thing)
   |> line(end = [0, 5])

docs/kcl/polygon.md

@@ -34,7 +34,7 @@ polygon(
 
 ```js
 // Create a regular hexagon inscribed in a circle of radius 10
-hex = startSketchOn('XY')
+hex = startSketchOn(XY)
   |> polygon({
        radius = 10,
        numSides = 6,
@@ -49,7 +49,7 @@ example = extrude(hex, length = 5)
 
 ```js
 // Create a square circumscribed around a circle of radius 5
-square = startSketchOn('XY')
+square = startSketchOn(XY)
   |> polygon({
        radius = 5.0,
        numSides = 4,

docs/kcl/pow.md

@@ -35,7 +35,7 @@ pow(
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({ angle = 50, length = pow(5, 2) }, %)
   |> yLine(endAbsolute = 0)

docs/kcl/reduce.md

@@ -52,7 +52,6 @@ fn sum(arr):
         sumSoFar = add(sumSoFar, i)
     return sumSoFar */
 
-
 // We use `assertEqual` to check that our `sum` function gives the
 // expected result. It's good to check your work!
 assertEqual(sum([1, 2, 3]), 6, 0.00001, "1 + 2 + 3 summed is 6")
@@ -83,7 +82,7 @@ fn decagon(radius) {
   stepAngle = 1 / 10 * TAU
 
   // Start the decagon sketch at this point.
-  startOfDecagonSketch = startSketchOn('XY')
+  startOfDecagonSketch = startSketchOn(XY)
     |> startProfileAt([cos(0) * radius, sin(0) * radius], %)
 
     // Use a `reduce` to draw the remaining decagon sides.
@@ -114,7 +113,6 @@ fn decagon(radius):
     fullDecagon = partialDecagon // it's now full
     return fullDecagon */
 
-
 // Use the `decagon` function declared above, to sketch a decagon with radius 5.
 decagon(5.0)
   |> close()

docs/kcl/rotate.md

@@ -6,6 +6,10 @@ layout: manual
 
 Rotate a solid or a sketch.
 
+This is really useful for assembling parts together. You can create a part and then rotate it to the correct orientation.
+
+For sketches, you can use this to rotate a sketch and then loft it with another sketch.
+
 ### Using Roll, Pitch, and Yaw
 
 When rotating a part in 3D space, "roll," "pitch," and "yaw" refer to the three rotational axes used to describe its orientation: roll is rotation around the longitudinal axis (front-to-back), pitch is rotation around the lateral axis (wing-to-wing), and yaw is rotation around the vertical axis (up-down); essentially, it's like tilting the part on its side (roll), tipping the nose up or down (pitch), and turning it left or right (yaw).
@@ -57,9 +61,8 @@ rotate(
 ```js
 // Rotate a pipe with roll, pitch, and yaw.
 
-
 // Create a path for the sweep.
-sweepPath = startSketchOn('XZ')
+sweepPath = startSketchOn(XZ)
   |> startProfileAt([0.05, 0.05], %)
   |> line(end = [0, 7])
   |> tangentialArc({ offset = 90, radius = 5 }, %)
@@ -68,10 +71,10 @@ sweepPath = startSketchOn('XZ')
   |> line(end = [0, 7])
 
 // Create a hole for the pipe.
-pipeHole = startSketchOn('XY')
+pipeHole = startSketchOn(XY)
   |> circle(center = [0, 0], radius = 1.5)
 
-sweepSketch = startSketchOn('XY')
+sweepSketch = startSketchOn(XY)
   |> circle(center = [0, 0], radius = 2)
   |> hole(pipeHole, %)
   |> sweep(path = sweepPath)
@@ -83,9 +86,8 @@ sweepSketch = startSketchOn('XY')
 ```js
 // Rotate a pipe about an axis with an angle.
 
-
 // Create a path for the sweep.
-sweepPath = startSketchOn('XZ')
+sweepPath = startSketchOn(XZ)
   |> startProfileAt([0.05, 0.05], %)
   |> line(end = [0, 7])
   |> tangentialArc({ offset = 90, radius = 5 }, %)
@@ -94,10 +96,10 @@ sweepPath = startSketchOn('XZ')
   |> line(end = [0, 7])
 
 // Create a hole for the pipe.
-pipeHole = startSketchOn('XY')
+pipeHole = startSketchOn(XY)
   |> circle(center = [0, 0], radius = 1.5)
 
-sweepSketch = startSketchOn('XY')
+sweepSketch = startSketchOn(XY)
   |> circle(center = [0, 0], radius = 2)
   |> hole(pipeHole, %)
   |> sweep(path = sweepPath)
@@ -122,7 +124,7 @@ cube
 // Sweep two sketches along the same path.
 
 
-sketch001 = startSketchOn('XY')
+sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
   |> angledLine([0, 73.47], %, $rectangleSegmentA001)
   |> angledLine([
@@ -138,7 +140,7 @@ rectangleSketch = startProfileAt([-200, 23.86], sketch001)
 
 circleSketch = circle(sketch001, center = [200, -30.29], radius = 32.63)
 
-sketch002 = startSketchOn('YZ')
+sketch002 = startSketchOn(YZ)
 sweepPath = startProfileAt([0, 0], sketch002)
   |> yLine(length = 231.81)
   |> tangentialArc({ radius = 80, offset = -90 }, %)
@@ -154,7 +156,7 @@ rotate(parts, axis = [0, 0, 1.0], angle = 90)
 
 ```js
 // Translate and rotate a sketch to create a loft.
-sketch001 = startSketchOn('XY')
+sketch001 = startSketchOn(XY)
 
 fn square() {
   return startProfileAt([-10, 10], sketch001)
@@ -168,7 +170,7 @@ fn square() {
 profile001 = square()
 
 profile002 = square()
-  |> translate(translate = [0, 0, 20])
+  |> translate(x = 0, y = 0, z = 20)
   |> rotate(axis = [0, 0, 1.0], angle = 45)
 
 loft([profile001, profile002])

docs/kcl/round.md

@@ -31,7 +31,7 @@ round(num: number): number
 ### Examples
 
 ```js
-sketch001 = startSketchOn('XZ')
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(endAbsolute = [12, 10])
   |> line(end = [round(7.02986), 0])

docs/kcl/segAng.md

@@ -27,7 +27,7 @@ segAng(tag: TagIdentifier): number
 ### Examples
 
 ```js
-exampleSketch = startSketchOn('XZ')
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
   |> line(end = [5, 10], tag = $seg01)

docs/kcl/segEnd.md

@@ -28,7 +28,7 @@ segEnd(tag: TagIdentifier): [number]
 
 ```js
 w = 15
-cube = startSketchOn('XY')
+cube = startSketchOn(XY)
   |> startProfileAt([0, 0], %)
   |> line(end = [w, 0], tag = $line1)
   |> line(end = [0, w], tag = $line2)
@@ -38,7 +38,7 @@ cube = startSketchOn('XY')
   |> extrude(length = 5)
 
 fn cylinder(radius, tag) {
-  return startSketchOn('XY')
+  return startSketchOn(XY)
     |> startProfileAt([0, 0], %)
     |> circle(radius = radius, center = segEnd(tag))
     |> extrude(length = radius)

docs/kcl/segEndX.md

@@ -27,7 +27,7 @@ segEndX(tag: TagIdentifier): number
 ### Examples
 
 ```js
-exampleSketch = startSketchOn('XZ')
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [20, 0], tag = $thing)
   |> line(end = [0, 5])

docs/kcl/segEndY.md

@@ -27,7 +27,7 @@ segEndY(tag: TagIdentifier): number
 ### Examples
 
 ```js
-exampleSketch = startSketchOn('XZ')
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [20, 0])
   |> line(end = [0, 3], tag = $thing)

docs/kcl/segLen.md

@@ -27,7 +27,7 @@ segLen(tag: TagIdentifier): number
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({ angle = 60, length = 10 }, %, $thing)
   |> tangentialArc({ offset = -120, radius = 5 }, %)

docs/kcl/segStart.md

@@ -28,7 +28,7 @@ segStart(tag: TagIdentifier): [number]
 
 ```js
 w = 15
-cube = startSketchOn('XY')
+cube = startSketchOn(XY)
   |> startProfileAt([0, 0], %)
   |> line(end = [w, 0], tag = $line1)
   |> line(end = [0, w], tag = $line2)
@@ -38,7 +38,7 @@ cube = startSketchOn('XY')
   |> extrude(length = 5)
 
 fn cylinder(radius, tag) {
-  return startSketchOn('XY')
+  return startSketchOn(XY)
     |> startProfileAt([0, 0], %)
     |> circle(radius = radius, center = segStart(tag))
     |> extrude(length = radius)

docs/kcl/segStartX.md

@@ -27,7 +27,7 @@ segStartX(tag: TagIdentifier): number
 ### Examples
 
 ```js
-exampleSketch = startSketchOn('XZ')
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [20, 0], tag = $thing)
   |> line(end = [0, 5])

docs/kcl/segStartY.md

@@ -27,7 +27,7 @@ segStartY(tag: TagIdentifier): number
 ### Examples
 
 ```js
-exampleSketch = startSketchOn('XZ')
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [20, 0])
   |> line(end = [0, 3], tag = $thing)

docs/kcl/shell.md

@@ -34,7 +34,7 @@ shell(
 
 ```js
 // Remove the end face for the extrusion.
-firstSketch = startSketchOn('XY')
+firstSketch = startSketchOn(XY)
   |> startProfileAt([-12, 12], %)
   |> line(end = [24, 0])
   |> line(end = [0, -24])
@@ -50,7 +50,7 @@ shell(firstSketch, faces = ['end'], thickness = 0.25)
 
 ```js
 // Remove the start face for the extrusion.
-firstSketch = startSketchOn('-XZ')
+firstSketch = startSketchOn(-XZ)
   |> startProfileAt([-12, 12], %)
   |> line(end = [24, 0])
   |> line(end = [0, -24])
@@ -66,7 +66,7 @@ shell(firstSketch, faces = ['start'], thickness = 0.25)
 
 ```js
 // Remove a tagged face and the end face for the extrusion.
-firstSketch = startSketchOn('XY')
+firstSketch = startSketchOn(XY)
   |> startProfileAt([-12, 12], %)
   |> line(end = [24, 0])
   |> line(end = [0, -24])
@@ -82,7 +82,7 @@ shell(firstSketch, faces = [myTag], thickness = 0.25)
 
 ```js
 // Remove multiple faces at once.
-firstSketch = startSketchOn('XY')
+firstSketch = startSketchOn(XY)
   |> startProfileAt([-12, 12], %)
   |> line(end = [24, 0])
   |> line(end = [0, -24])
@@ -99,7 +99,7 @@ shell(firstSketch, faces = [myTag, 'end'], thickness = 0.25)
 ```js
 // Shell a sketch on face.
 size = 100
-case = startSketchOn('-XZ')
+case = startSketchOn(-XZ)
   |> startProfileAt([-size, -size], %)
   |> line(end = [2 * size, 0])
   |> line(end = [0, 2 * size])
@@ -124,7 +124,7 @@ shell(case, faces = ['start'], thickness = 5)
 ```js
 // Shell a sketch on face object on the end face.
 size = 100
-case = startSketchOn('XY')
+case = startSketchOn(XY)
   |> startProfileAt([-size, -size], %)
   |> line(end = [2 * size, 0])
   |> line(end = [0, 2 * size])
@@ -152,7 +152,7 @@ shell(thing1, faces = ['end'], thickness = 5)
 
 
 size = 100
-case = startSketchOn('XY')
+case = startSketchOn(XY)
   |> startProfileAt([-size, -size], %)
   |> line(end = [2 * size, 0])
   |> line(end = [0, 2 * size])

docs/kcl/sqrt.md

@@ -31,7 +31,7 @@ sqrt(num: number): number
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({ angle = 50, length = sqrt(2500) }, %)
   |> yLine(endAbsolute = 0)

docs/kcl/std-math-cos.md

@@ -9,7 +9,7 @@ Compute the cosine of a number (in radians).
 
 
 ```js
-cos(num: number(rad)): number(_)
+cos(@num: number(rad)): number(_)
 ```
 
 
@@ -27,7 +27,7 @@ cos(num: number(rad)): number(_)
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
     angle = 30,

docs/kcl/std-math-sin.md

@@ -9,7 +9,7 @@ Compute the sine of a number (in radians).
 
 
 ```js
-sin(num: number(rad)): number(_)
+sin(@num: number(rad)): number(_)
 ```
 
 
@@ -27,7 +27,7 @@ sin(num: number(rad)): number(_)
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
     angle = 50,

docs/kcl/std-math-tan.md

@@ -9,7 +9,7 @@ Compute the tangent of a number (in radians).
 
 
 ```js
-tan(num: number(rad)): number(_)
+tan(@num: number(rad)): number(_)
 ```
 
 
@@ -27,7 +27,7 @@ tan(num: number(rad)): number(_)
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
     angle = 50,