Bump kcl versions (#6089)

Signed-off-by: Jess Frazelle <github@jessfraz.com>

.env.development

@@ -1,5 +1,6 @@
 NODE_ENV=development
 DEV=true
+
 VITE_KC_API_WS_MODELING_URL=wss://api.dev.zoo.dev/ws/modeling/commands
 VITE_KC_API_BASE_URL=https://api.dev.zoo.dev
 VITE_KC_SITE_BASE_URL=https://dev.zoo.dev
@@ -8,3 +9,5 @@ VITE_KC_SKIP_AUTH=false
 VITE_KC_CONNECTION_TIMEOUT_MS=5000
 # ONLY add your token in .env.development.local if you want to skip auth, otherwise this token takes precedence!
 #VITE_KC_DEV_TOKEN="your token from dev.zoo.dev should go in .env.development.local"
+
+FAIL_ON_CONSOLE_ERRORS=true

.envrc

@@ -1 +1,13 @@
+# Load optional shared environment variables
+source_up_if_exists
+
+# Load default development environment variables
+dotenv .env.development
+
+# Load optional environment variables overrides
+dotenv_if_exists .env.development.local
+
+# Load optional testing environment variables
+dotenv_if_exists e2e/playwright/playwright-secrets.env
+
 use flake .

.eslintrc

@@ -20,8 +20,20 @@
       "plugin:react-hooks/recommended"
     ],
     "rules": {
+      "no-array-constructor": "off", // This is wrong; use the @typescript-eslint one instead.
+      "@typescript-eslint/no-array-constructor": "error",
+      "@typescript-eslint/no-array-delete": "error",
+      "@typescript-eslint/no-duplicate-enum-values": "error",
+      "@typescript-eslint/no-duplicate-type-constituents": "error",
+      "@typescript-eslint/no-empty-object-type": "error",
       "@typescript-eslint/no-floating-promises": "error",
+      "no-implied-eval": "off", // This is wrong; use the @typescript-eslint one instead.
+      "@typescript-eslint/no-implied-eval": "error",
       "@typescript-eslint/no-misused-promises": "error",
+      "@typescript-eslint/no-namespace": "error",
+      "@typescript-eslint/no-unnecessary-type-assertion": "error",
+      "@typescript-eslint/no-unnecessary-type-constraint": "error",
+      "no-unused-vars": "off", // This is wrong; use the @typescript-eslint one instead.
       "@typescript-eslint/no-unused-vars": ["error", {
         "varsIgnorePattern": "^_",
         "argsIgnorePattern": "^_",
@@ -29,6 +41,7 @@
         "vars": "all",
         "args": "none"
       }],
+      "@typescript-eslint/prefer-as-const": "warn",
       "jsx-a11y/click-events-have-key-events": "off",
       "jsx-a11y/no-autofocus": "off",
       "jsx-a11y/no-noninteractive-element-interactions": "off",

.github/workflows/e2e-tests.yml

@@ -1,7 +1,9 @@
 name: E2E Tests
 on:
   push:
-    branches: [ main ]
+    branches:
+      - main
+      - all-e2e # this bypasses `fixme()` using `orRunWhenFullSuiteEnabled()`
   pull_request:
   schedule:
     - cron: 0 * * * *  # hourly
@@ -15,7 +17,6 @@ permissions:
   pull-requests: write
   actions: read
 
-
 jobs:
 
   conditions:
@@ -67,14 +68,16 @@ jobs:
       - name: Display conditions
         shell: bash
         run: |
-          # For debugging purposes.
+          # For debugging purposes
           set -euo pipefail
+          echo "GITHUB_REF: $GITHUB_REF"
+          echo "GITHUB_HEAD_REF: $GITHUB_HEAD_REF"
+          echo "GITHUB_BASE_REF: $GITHUB_BASE_REF"
           echo "significant: ${{ steps.path-changes.outputs.significant }}"
           echo "should-run: ${{ steps.should-run.outputs.should-run }}"
 
-
   prepare-wasm:
-    # seperate job on Ubuntu to build or fetch the wasm blob once on the fastest runner
+    # separate job on Ubuntu to build or fetch the wasm blob once on the fastest runner
     runs-on: runs-on=${{ github.run_id }}/family=i7ie.2xlarge/image=ubuntu22-full-x64
     needs: conditions
     steps:
@@ -160,7 +163,6 @@ jobs:
           path: |
             rust/kcl-wasm-lib/pkg/kcl_wasm_lib*
 
-
   snapshots:
     name: playwright:snapshots:ubuntu
     runs-on: runs-on=${{ github.run_id }}/family=i7ie.2xlarge/image=ubuntu22-full-x64
@@ -227,10 +229,6 @@ jobs:
           timeout_minutes: 30
           max_attempts: 3
         env:
-          CI: true
-          NODE_ENV: development
-          VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
-          VITE_KC_SKIP_AUTH: true
           token: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
           snapshottoken: ${{ secrets.KITTYCAD_API_TOKEN }}
 
@@ -243,7 +241,7 @@ jobs:
           retention-days: 30
           overwrite: true
 
-      - name: check for changes
+      - name: Check for changes
         if: ${{ needs.conditions.outputs.should-run == 'true' && github.ref != 'refs/heads/main' }}
         shell: bash
         id: git-check
@@ -255,7 +253,8 @@ jobs:
             fi
 
       - name: Commit changes, if any
-        if: ${{ needs.conditions.outputs.should-run == 'true' && steps.git-check.outputs.modified == 'true' }}
+        # TODO: find a more reliable way to detect visual changes
+        if: ${{ false && needs.conditions.outputs.should-run == 'true' && steps.git-check.outputs.modified == 'true' }}
         shell: bash
         run: |
           git add e2e/playwright/snapshot-tests.spec.ts-snapshots e2e/playwright/snapshots
@@ -341,7 +340,7 @@ jobs:
         run: yarn tronb:vite:dev
 
       - name: Install vector
-        if: contains(matrix.os, 'ubuntu')
+        if: ${{ needs.conditions.outputs.should-run == 'true' && contains(matrix.os, 'ubuntu') }}
         shell: bash
         run: |
           curl --proto '=https' --tlsv1.2 -sSfL https://sh.vector.dev > /tmp/vector.sh
@@ -374,11 +373,7 @@ jobs:
           timeout_minutes: 45
           max_attempts: 15
         env:
-          CI: true
           FAIL_ON_CONSOLE_ERRORS: true
-          NODE_ENV: development
-          VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
-          VITE_KC_SKIP_AUTH: true
           token: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
 
       - uses: actions/upload-artifact@v4

.github/workflows/static-analysis.yml

@@ -28,43 +28,57 @@ jobs:
       - run: yarn fmt-check
 
   yarn-build-wasm:
-    runs-on: ubuntu-22.04
-
+    # Build the wasm blob once on the fastest runner.
+    runs-on: runs-on=${{ github.run_id }}/family=i7ie.2xlarge/image=ubuntu22-full-x64
     steps:
       - uses: actions/checkout@v4
+
       - uses: actions/setup-node@v4
         with:
           node-version-file: '.nvmrc'
           cache: 'yarn'
-      - run: yarn install
+
+      - name: Install dependencies
+        run: yarn install
+
+      - name: Use correct Rust toolchain
+        shell: bash
+        run: |
+          [ -e rust-toolchain.toml ] || cp rust/rust-toolchain.toml ./
+
+      - name: Install rust
+        uses: actions-rust-lang/setup-rust-toolchain@v1
+        with:
+          cache: false # Configured below.
+
       - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
-      - run: yarn build:wasm
 
-  yarn-tsc:
-    runs-on: ubuntu-22.04
-
-    steps:
-      - uses: actions/checkout@v4
-      - uses: actions/setup-node@v4
-        with:
-          node-version-file: '.nvmrc'
-          cache: 'yarn'
-      - run: yarn install
-      - run: yarn --cwd ./rust/kcl-language-server --modules-folder node_modules install
-      - uses: Swatinem/rust-cache@v2
+      - name: Rust Cache
+        uses: Swatinem/rust-cache@v2
         with:
           workspaces: './rust'
 
-      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
-        with:
-          tool: wasm-pack
-      - run: yarn build:wasm
-      - run: yarn tsc
+      - name: Build Wasm
+        shell: bash
+        run: yarn build:wasm
 
-  yarn-lint:
-    runs-on: ubuntu-22.04
+      - uses: actions/upload-artifact@v4
+        with:
+          name: prepared-wasm
+          path: |
+            rust/kcl-wasm-lib/pkg/kcl_wasm_lib*
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: prepared-ts-rs-bindings
+          path: |
+            rust/kcl-lib/bindings/*
+
+  yarn-tsc:
+    runs-on: ubuntu-latest
+    needs: yarn-build-wasm
 
     steps:
       - uses: actions/checkout@v4
@@ -73,7 +87,53 @@ jobs:
           node-version-file: '.nvmrc'
           cache: 'yarn'
       - run: yarn install
-      - run: yarn --cwd ./rust/kcl-language-server --modules-folder node_modules install
+
+      - name: Download all artifacts
+        uses: actions/download-artifact@v4
+
+      - name: Copy prepared wasm
+        run: |
+          ls -R prepared-wasm
+          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
+          mkdir rust/kcl-wasm-lib/pkg
+          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
+
+      - name: Copy prepared ts-rs bindings
+        run: |
+          ls -R prepared-ts-rs-bindings
+          mkdir rust/kcl-lib/bindings
+          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
+
+      - run: yarn tsc
+
+  yarn-lint:
+    runs-on: ubuntu-latest
+    needs: yarn-build-wasm
+
+    steps:
+      - uses: actions/checkout@v4
+      - uses: actions/setup-node@v4
+        with:
+          node-version-file: '.nvmrc'
+          cache: 'yarn'
+      - run: yarn install
+
+      - name: Download all artifacts
+        uses: actions/download-artifact@v4
+
+      - name: Copy prepared wasm
+        run: |
+          ls -R prepared-wasm
+          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
+          mkdir rust/kcl-wasm-lib/pkg
+          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
+
+      - name: Copy prepared ts-rs bindings
+        run: |
+          ls -R prepared-ts-rs-bindings
+          mkdir rust/kcl-lib/bindings
+          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
+
       - run: yarn lint
 
   python-codespell:
@@ -91,6 +151,7 @@ jobs:
 
   yarn-unit-test-kcl-samples:
     runs-on: ubuntu-latest
+    needs: yarn-build-wasm
     steps:
       - uses: actions/checkout@v4
 
@@ -103,7 +164,22 @@ jobs:
       - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
-      - run: yarn build:wasm
+
+      - name: Download all artifacts
+        uses: actions/download-artifact@v4
+
+      - name: Copy prepared wasm
+        run: |
+          ls -R prepared-wasm
+          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
+          mkdir rust/kcl-wasm-lib/pkg
+          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
+
+      - name: Copy prepared ts-rs bindings
+        run: |
+          ls -R prepared-ts-rs-bindings
+          mkdir rust/kcl-lib/bindings
+          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
 
       - run: yarn simpleserver:bg
         if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
@@ -120,6 +196,7 @@ jobs:
 
   yarn-unit-test:
     runs-on: ubuntu-latest
+    needs: yarn-build-wasm
     steps:
       - uses: actions/checkout@v4
 
@@ -132,7 +209,22 @@ jobs:
       - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
-      - run: yarn build:wasm
+
+      - name: Download all artifacts
+        uses: actions/download-artifact@v4
+
+      - name: Copy prepared wasm
+        run: |
+          ls -R prepared-wasm
+          cp prepared-wasm/kcl_wasm_lib_bg.wasm public
+          mkdir rust/kcl-wasm-lib/pkg
+          cp prepared-wasm/kcl_wasm_lib* rust/kcl-wasm-lib/pkg
+
+      - name: Copy prepared ts-rs bindings
+        run: |
+          ls -R prepared-ts-rs-bindings
+          mkdir rust/kcl-lib/bindings
+          cp -r prepared-ts-rs-bindings/* rust/kcl-lib/bindings/
 
       - run: yarn simpleserver:bg
         if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
@@ -141,13 +233,13 @@ jobs:
         if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
         run: yarn playwright install chromium --with-deps
 
-      - name: run unit tests
+      - name: Run unit tests
         if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
         run: xvfb-run -a yarn test:unit
         env:
           VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
 
-      - name: check for changes
+      - name: Check for changes
         if: ${{ github.event_name != 'release' && github.event_name != 'schedule' }}
         id: git-check
         run: |

.github/workflows/update-e2e-branch.yml

@@ -14,16 +14,32 @@ permissions:
 jobs:
   update-branch:
     runs-on: ubuntu-latest
-
     steps:
+      - uses: actions/create-github-app-token@v1
+        id: app-token
+        with:
+          app-id: ${{ secrets.MODELING_APP_GH_APP_ID }}
+          private-key: ${{ secrets.MODELING_APP_GH_APP_PRIVATE_KEY }}
+          owner: ${{ github.repository_owner }}
+
       - uses: actions/checkout@v4
-      - shell: bash
+        with:
+          token: ${{ steps.app-token.outputs.token }}
+
+      - name: Sync with main
         run: |
-          # checkout our branch
+          # Create the branch
           git checkout all-e2e || git checkout -b all-e2e
-          # fetch origin
+
+          # Reset to main
           git fetch origin
-          # reset to main
           git reset --hard origin/main
-          # force push it
+
+          # Get a new SHA to prevent overwriting the commit status on main
+          git config --local user.email "github-actions[bot]@users.noreply.github.com"
+          git config --local user.name "github-actions[bot]"
+          git commit --allow-empty --message="[all-e2e] $(git log --max-count=1 --pretty=%B)"
+
+          # Overwrite the branch
+          git remote set-url origin https://x-access-token:${{ steps.app-token.outputs.token }}@github.com/${{ github.repository }}.git
           git push --force origin all-e2e

Makefile

@@ -20,8 +20,12 @@ $(WASM_PACK):
 ###############################################################################
 # BUILD
 
-RUST_SOURCES := $(wildcard rust/*) $(wildcard rust/**/*)
-TYPESCRIPT_SOURCES := $(wildcard src/**/*.tsx) $(wildcard src/**/*.ts)
+CARGO_SOURCES := rust/.cargo/config.toml $(wildcard rust/Cargo.*) $(wildcard rust/**/Cargo.*)
+RUST_SOURCES := $(wildcard rust/**/*.rs)
+
+REACT_SOURCES := $(wildcard src/*.tsx) $(wildcard src/**/*.tsx)
+TYPESCRIPT_SOURCES := tsconfig.* $(wildcard src/*.ts) $(wildcard src/**/*.ts)
+VITE_SOURCES := $(wildcard vite.*) $(wildcard vite/**/*.tsx)
 
 .PHONY: build
 build: build-web build-desktop
@@ -32,13 +36,13 @@ build-web: public/kcl_wasm_lib_bg.wasm build/index.html
 .PHONY: build-desktop
 build-desktop: public/kcl_wasm_lib_bg.wasm .vite/build/main.js
 
-public/kcl_wasm_lib_bg.wasm: $(RUST_SOURCES)
-	yarn build:wasm
+public/kcl_wasm_lib_bg.wasm: $(CARGO_SOURCES)$(RUST_SOURCES)
+	yarn build:wasm:dev
 
-build/index.html: $(TYPESCRIPT_SOURCES)
+build/index.html: $(REACT_SOURCES) $(TYPESCRIPT_SOURCES) $(VITE_SOURCES)
 	yarn build:local
 
-.vite/build/main.js: $(TYPESCRIPT_SOURCES)
+.vite/build/main.js: $(REACT_SOURCES) $(TYPESCRIPT_SOURCES) $(VITE_SOURCES)
 	yarn tronb:vite:dev
 
 ###############################################################################
@@ -73,19 +77,29 @@ run-desktop: install build-desktop ## Start the desktop app
 ###############################################################################
 # TEST
 
-GREP ?= ""
+E2E_WORKERS ?= 1
+E2E_FAILURES ?= 1
+E2E_GREP ?= ""
 
 .PHONY: test
 test: test-unit test-e2e
 
 .PHONY: test-unit
 test-unit: install ## Run the unit tests
-	@ nc -z localhost 3000 || ( echo "Error: localhost:3000 not available, 'make run-web' first" && exit 1 )
+	@ curl -fs localhost:3000 >/dev/null || ( echo "Error: localhost:3000 not available, 'make run-web' first" && exit 1 )
 	yarn test:unit
 
 .PHONY: test-e2e
-test-e2e: install build-desktop ## Run the e2e tests
-	yarn test:playwright:electron --workers=1 --grep=$(GREP)
+test-e2e: test-e2e-desktop
+
+.PHONY: test-e2e-web
+test-e2e-web: install build-web ## Run the web e2e tests
+	@ curl -fs localhost:3000 >/dev/null || ( echo "Error: localhost:3000 not available, 'make run-web' first" && exit 1 )
+	yarn chrome:test --headed --workers=$(E2E_WORKERS) --max-failures=$(E2E_FAILURES) --grep=$(E2E_GREP)
+
+.PHONY: test-e2e-desktop
+test-e2e-desktop: install build-desktop ## Run the desktop e2e tests
+	yarn test:playwright:electron --workers=$(E2E_WORKERS) --max-failures=$(E2E_FAILURES) --grep="$(E2E_GREP)"
 
 ###############################################################################
 # CLEAN

docs/kcl/circleThreePoint.md

@@ -10,10 +10,10 @@ Construct a circle derived from 3 points.
 
 ```js
 circleThreePoint(
+  sketchSurfaceOrGroup: SketchOrSurface,
   p1: [number],
   p2: [number],
   p3: [number],
-  sketchSurfaceOrGroup: SketchOrSurface,
   tag?: TagDeclarator,
 ): Sketch
 ```
@@ -23,10 +23,10 @@ circleThreePoint(
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
+| `sketchSurfaceOrGroup` | [`SketchOrSurface`](/docs/kcl/types/SketchOrSurface) | Plane or surface to sketch on. | Yes |
 | `p1` | [`[number]`](/docs/kcl/types/number) | 1st point to derive the circle. | Yes |
 | `p2` | [`[number]`](/docs/kcl/types/number) | 2nd point to derive the circle. | Yes |
 | `p3` | [`[number]`](/docs/kcl/types/number) | 3rd point to derive the circle. | Yes |
-| `sketchSurfaceOrGroup` | [`SketchOrSurface`](/docs/kcl/types/SketchOrSurface) | Plane or surface to sketch on. | Yes |
 | [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Identifier for the circle to reference elsewhere. | No |
 
 ### Returns

docs/kcl/consts.md

@@ -9,13 +9,9 @@ layout: manual
 
 ### `std`
 
-- [`HALF_TURN`](/docs/kcl/consts/std-HALF_TURN)
-- [`QUARTER_TURN`](/docs/kcl/consts/std-QUARTER_TURN)
-- [`THREE_QUARTER_TURN`](/docs/kcl/consts/std-THREE_QUARTER_TURN)
 - [`XY`](/docs/kcl/consts/std-XY)
 - [`XZ`](/docs/kcl/consts/std-XZ)
 - [`YZ`](/docs/kcl/consts/std-YZ)
-- [`ZERO`](/docs/kcl/consts/std-ZERO)
 
 ### `std::math`
 
@@ -23,3 +19,10 @@ layout: manual
 - [`PI`](/docs/kcl/consts/std-math-PI)
 - [`TAU`](/docs/kcl/consts/std-math-TAU)
 
+### `std::turns`
+
+- [`HALF_TURN`](/docs/kcl/consts/std-turns-HALF_TURN)
+- [`QUARTER_TURN`](/docs/kcl/consts/std-turns-QUARTER_TURN)
+- [`THREE_QUARTER_TURN`](/docs/kcl/consts/std-turns-THREE_QUARTER_TURN)
+- [`ZERO`](/docs/kcl/consts/std-turns-ZERO)
+

docs/kcl/consts/std-HALF_TURN.md

@@ -1,15 +0,0 @@
----
-title: "std::HALF_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::HALF_TURN: number(deg) = 180deg
-```
-
-

docs/kcl/consts/std-QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "std::QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::QUARTER_TURN: number(deg) = 90deg
-```
-
-

docs/kcl/consts/std-THREE_QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "std::THREE_QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::THREE_QUARTER_TURN: number(deg) = 270deg
-```
-
-

docs/kcl/consts/std-ZERO.md

@@ -1,15 +0,0 @@
----
-title: "std::ZERO"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::ZERO: number = 0
-```
-
-

docs/kcl/consts/std-math-E.md

@@ -15,7 +15,7 @@ std::math::E: number = 2.71828182845904523536028747135266250_
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
     angle = 30,

docs/kcl/consts/std-math-PI.md

@@ -17,7 +17,7 @@ std::math::PI: number = 3.14159265358979323846264338327950288_
 ```js
 circumference = 70
 
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
  |> circle(center = [0, 0], radius = circumference/ (2 * PI))
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/consts/std-math-TAU.md

@@ -15,7 +15,7 @@ std::math::TAU: number = 6.28318530717958647692528676655900577_
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
     angle = 50,

docs/kcl/consts/std-turns-HALF_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "std::turns::HALF_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::turns::HALF_TURN: number(deg) = 180deg
+```
+
+

docs/kcl/consts/std-turns-QUARTER_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "std::turns::QUARTER_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::turns::QUARTER_TURN: number(deg) = 90deg
+```
+
+

docs/kcl/consts/std-turns-THREE_QUARTER_TURN.md

@@ -0,0 +1,15 @@
+---
+title: "std::turns::THREE_QUARTER_TURN"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::turns::THREE_QUARTER_TURN: number(deg) = 270deg
+```
+
+

docs/kcl/consts/std-turns-ZERO.md

@@ -0,0 +1,15 @@
+---
+title: "std::turns::ZERO"
+excerpt: ""
+layout: manual
+---
+
+
+
+
+
+```js
+std::turns::ZERO: number = 0
+```
+
+

docs/kcl/index.md

@@ -23,19 +23,15 @@ layout: manual
   * [`tag`](kcl/types/tag)
 * **std**
   * [`Face`](kcl/types/Face)
-  * [`HALF_TURN`](kcl/consts/std-HALF_TURN)
   * [`Helix`](kcl/types/Helix)
   * [`Plane`](kcl/types/Plane)
   * [`Point2d`](kcl/types/Point2d)
   * [`Point3d`](kcl/types/Point3d)
-  * [`QUARTER_TURN`](kcl/consts/std-QUARTER_TURN)
   * [`Sketch`](kcl/types/Sketch)
   * [`Solid`](kcl/types/Solid)
-  * [`THREE_QUARTER_TURN`](kcl/consts/std-THREE_QUARTER_TURN)
   * [`XY`](kcl/consts/std-XY)
   * [`XZ`](kcl/consts/std-XZ)
   * [`YZ`](kcl/consts/std-YZ)
-  * [`ZERO`](kcl/consts/std-ZERO)
   * [`abs`](kcl/abs)
   * [`acos`](kcl/acos)
   * [`angleToMatchLengthX`](kcl/angleToMatchLengthX)
@@ -61,7 +57,6 @@ layout: manual
   * [`bezierCurve`](kcl/bezierCurve)
   * [`ceil`](kcl/ceil)
   * [`chamfer`](kcl/chamfer)
-  * [`circle`](kcl/circle)
   * [`circleThreePoint`](kcl/circleThreePoint)
   * [`close`](kcl/close)
   * [`cm`](kcl/cm)
@@ -145,3 +140,10 @@ layout: manual
   * [`cos`](kcl/std-math-cos)
   * [`sin`](kcl/std-math-sin)
   * [`tan`](kcl/std-math-tan)
+* **std::sketch**
+  * [`circle`](kcl/std-sketch-circle)
+* **std::turns**
+  * [`turns::HALF_TURN`](kcl/consts/std-turns-HALF_TURN)
+  * [`turns::QUARTER_TURN`](kcl/consts/std-turns-QUARTER_TURN)
+  * [`turns::THREE_QUARTER_TURN`](kcl/consts/std-turns-THREE_QUARTER_TURN)
+  * [`turns::ZERO`](kcl/consts/std-turns-ZERO)

docs/kcl/rotate.md

@@ -6,6 +6,10 @@ layout: manual
 
 Rotate a solid or a sketch.
 
+This is really useful for assembling parts together. You can create a part and then rotate it to the correct orientation.
+
+For sketches, you can use this to rotate a sketch and then loft it with another sketch.
+
 ### Using Roll, Pitch, and Yaw
 
 When rotating a part in 3D space, "roll," "pitch," and "yaw" refer to the three rotational axes used to describe its orientation: roll is rotation around the longitudinal axis (front-to-back), pitch is rotation around the lateral axis (wing-to-wing), and yaw is rotation around the vertical axis (up-down); essentially, it's like tilting the part on its side (roll), tipping the nose up or down (pitch), and turning it left or right (yaw).
@@ -166,7 +170,7 @@ fn square() {
 profile001 = square()
 
 profile002 = square()
-  |> translate(translate = [0, 0, 20])
+  |> translate(x = 0, y = 0, z = 20)
   |> rotate(axis = [0, 0, 1.0], angle = 45)
 
 loft([profile001, profile002])

docs/kcl/std-math-cos.md

@@ -9,7 +9,7 @@ Compute the cosine of a number (in radians).
 
 
 ```js
-cos(num: number(rad)): number(_)
+cos(@num: number(rad)): number(_)
 ```
 
 
@@ -27,7 +27,7 @@ cos(num: number(rad)): number(_)
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
     angle = 30,

docs/kcl/std-math-sin.md

@@ -9,7 +9,7 @@ Compute the sine of a number (in radians).
 
 
 ```js
-sin(num: number(rad)): number(_)
+sin(@num: number(rad)): number(_)
 ```
 
 
@@ -27,7 +27,7 @@ sin(num: number(rad)): number(_)
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
     angle = 50,

docs/kcl/std-math-tan.md

@@ -9,7 +9,7 @@ Compute the tangent of a number (in radians).
 
 
 ```js
-tan(num: number(rad)): number(_)
+tan(@num: number(rad)): number(_)
 ```
 
 
@@ -27,7 +27,7 @@ tan(num: number(rad)): number(_)
 ### Examples
 
 ```js
-exampleSketch = startSketchOn("XZ")
+exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> angledLine({
     angle = 50,

docs/kcl/types/ExtrudeSurface.md

@@ -28,7 +28,7 @@ An extrude plane.
 | `faceId` |[`string`](/docs/kcl/types/string)| The face id for the extrude plane. | No |
 | [`tag`](/docs/kcl/types/tag) |[`TagDeclarator`](/docs/kcl/types#tag-declaration)| The tag. | No |
 | `id` |[`string`](/docs/kcl/types/string)| The id of the geometry. | No |
-| `sourceRange` |[`SourceRange`](/docs/kcl/types/SourceRange)| The source range. | No |
+| `sourceRange` |`[integer, integer, integer]`| The source range. | No |
 
 
 ----
@@ -48,7 +48,7 @@ An extruded arc.
 | `faceId` |[`string`](/docs/kcl/types/string)| The face id for the extrude plane. | No |
 | [`tag`](/docs/kcl/types/tag) |[`TagDeclarator`](/docs/kcl/types#tag-declaration)| The tag. | No |
 | `id` |[`string`](/docs/kcl/types/string)| The id of the geometry. | No |
-| `sourceRange` |[`SourceRange`](/docs/kcl/types/SourceRange)| The source range. | No |
+| `sourceRange` |`[integer, integer, integer]`| The source range. | No |
 
 
 ----
@@ -68,7 +68,7 @@ Geometry metadata.
 | `faceId` |[`string`](/docs/kcl/types/string)| The id for the chamfer surface. | No |
 | [`tag`](/docs/kcl/types/tag) |[`TagDeclarator`](/docs/kcl/types#tag-declaration)| The tag. | No |
 | `id` |[`string`](/docs/kcl/types/string)| The id of the geometry. | No |
-| `sourceRange` |[`SourceRange`](/docs/kcl/types/SourceRange)| The source range. | No |
+| `sourceRange` |`[integer, integer, integer]`| The source range. | No |
 
 
 ----
@@ -88,7 +88,7 @@ Geometry metadata.
 | `faceId` |[`string`](/docs/kcl/types/string)| The id for the fillet surface. | No |
 | [`tag`](/docs/kcl/types/tag) |[`TagDeclarator`](/docs/kcl/types#tag-declaration)| The tag. | No |
 | `id` |[`string`](/docs/kcl/types/string)| The id of the geometry. | No |
-| `sourceRange` |[`SourceRange`](/docs/kcl/types/SourceRange)| The source range. | No |
+| `sourceRange` |`[integer, integer, integer]`| The source range. | No |
 
 
 ----

docs/kcl/types/GeoMeta.md

@@ -17,6 +17,6 @@ Geometry metadata.
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
 | `id` |[`string`](/docs/kcl/types/string)| The id of the geometry. | No |
-| `sourceRange` |[`SourceRange`](/docs/kcl/types/SourceRange)| The source range. | No |
+| `sourceRange` |`[integer, integer, integer]`| The source range. | No |
 
 

docs/kcl/types/HelixValue.md

@@ -17,7 +17,7 @@ A helix.
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
 | `value` |[`string`](/docs/kcl/types/string)| The id of the helix. | No |
-| `artifactId` |[`ArtifactId`](/docs/kcl/types/ArtifactId)| The artifact ID. | No |
+| `artifactId` |[`string`](/docs/kcl/types/string)| The artifact ID. | No |
 | `revolutions` |[`number`](/docs/kcl/types/number)| Number of revolutions. | No |
 | `angleStart` |[`number`](/docs/kcl/types/number)| Start angle (in degrees). | No |
 | `ccw` |`boolean`| Is the helix rotation counter clockwise? | No |

docs/kcl/types/KclValue.md

@@ -285,7 +285,7 @@ Data for an imported geometry.
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
 | `type` |enum: `Module`|  | No |
-| `value` |[`ModuleId`](/docs/kcl/types/ModuleId)| Identifier of a source file.  Uses a u32 to keep the size small. | No |
+| `value` |`integer`| Identifier of a source file.  Uses a u32 to keep the size small. | No |
 
 
 ----

docs/kcl/types/Point2d.md

@@ -10,8 +10,8 @@ A point in two dimensional space.
 type Point2d = [number; 2]
 ```
 
-`Point2d` is an alias for a two-element array of [number](/docs/kcl/types/number)s. To write a value
-with type `Point2d`, use an array, e.g., `[0, 0]` or `[5.0, 3.14]`.
+[`Point2d`](/docs/kcl/types/Point2d) is an alias for a two-element array of [number](/docs/kcl/types/number)s. To write a value
+with type [`Point2d`](/docs/kcl/types/Point2d), use an array, e.g., `[0, 0]` or `[5.0, 3.14]`.
 
 
 

docs/kcl/types/Point3d.md

@@ -10,8 +10,8 @@ A point in three dimensional space.
 type Point3d = [number; 3]
 ```
 
-`Point3d` is an alias for a three-element array of [number](/docs/kcl/types/number)s. To write a value
-with type `Point3d`, use an array, e.g., `[0, 0, 0]` or `[5.0, 3.14, 6.8]`.
+[`Point3d`](/docs/kcl/types/Point3d) is an alias for a three-element array of [number](/docs/kcl/types/number)s. To write a value
+with type [`Point3d`](/docs/kcl/types/Point3d), use an array, e.g., `[0, 0, 0]` or `[5.0, 3.14, 6.8]`.
 
 
 

docs/kcl/types/PolarCoordsData.md

@@ -17,6 +17,6 @@ Data for polar coordinates.
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
 | `angle` |[`number`](/docs/kcl/types/number)| The angle of the line (in degrees). | No |
-| `length` |[`TyF64`](/docs/kcl/types/TyF64)| The length of the line. | No |
+| `length` |[`number`](/docs/kcl/types/number)| The length of the line. | No |
 
 

docs/kcl/types/Sketch.md

@@ -17,7 +17,7 @@ mySketch = startSketchOn('XY')
     |> close()
 ```
 
-The `mySketch` variable will be an executed `Sketch` object. Executed being past
+The `mySketch` variable will be an executed [`Sketch`](/docs/kcl/types/Sketch) object. Executed being past
 tense, because the engine has already executed the commands to create the sketch.
 
 The previous sketch commands will never be executed again, in this case.

docs/kcl/types/SketchSurface.md

@@ -25,7 +25,7 @@ A sketch type.
 |----------|------|-------------|----------|
 | `type` |enum: `plane`|  | No |
 | `id` |[`string`](/docs/kcl/types/string)| The id of the plane. | No |
-| `artifactId` |[`ArtifactId`](/docs/kcl/types/ArtifactId)| The artifact ID. | No |
+| `artifactId` |[`string`](/docs/kcl/types/string)| The artifact ID. | No |
 | `value` |[`PlaneType`](/docs/kcl/types/PlaneType)| Type for a plane. | No |
 | `origin` |[`Point3d`](/docs/kcl/types/Point3d)| Origin of the plane. | No |
 | `xAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the plane's X axis be? | No |
@@ -49,7 +49,7 @@ A face.
 |----------|------|-------------|----------|
 | `type` |enum: `face`|  | No |
 | `id` |[`string`](/docs/kcl/types/string)| The id of the face. | No |
-| `artifactId` |[`ArtifactId`](/docs/kcl/types/ArtifactId)| The artifact ID. | No |
+| `artifactId` |[`string`](/docs/kcl/types/string)| The artifact ID. | No |
 | `value` |[`string`](/docs/kcl/types/string)| The tag of the face. | No |
 | `xAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the face's X axis be? | No |
 | `yAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the face's Y axis be? | No |

docs/kcl/types/Solid.md

@@ -18,7 +18,7 @@ myPart = startSketchOn('XY')
     |> extrude(length = 6)
 ```
 
-The `myPart` variable will be an executed `Solid` object. Executed being past
+The `myPart` variable will be an executed [`Solid`](/docs/kcl/types/Solid) object. Executed being past
 tense, because the engine has already executed the commands to create the solid.
 
 The previous solid commands will never be executed again, in this case.

docs/kcl/types/SourceRange.md

@@ -1,15 +0,0 @@
----
-title: "SourceRange"
-excerpt: ""
-layout: manual
----
-
-
-**Type:** `integer` (`uint`)
-
-
-
-
-
-
-

docs/kcl/types/TyF64.md

@@ -5,17 +5,11 @@ layout: manual
 ---
 
 
-**Type:** `object`
+**Type:** [`number`](/docs/kcl/types/number) (`double`)
 
 
 
 
 
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `n` |[`number`](/docs/kcl/types/number)|  | No |
-| `ty` |[`NumericType`](/docs/kcl/types/NumericType)|  | No |
 
 

e2e/playwright/basic-sketch.spec.ts

@@ -85,7 +85,7 @@ async function doBasicSketch(
   await page.mouse.click(startXPx, 500 - PUR * 20)
   if (openPanes.includes('code')) {
     await expect(u.codeLocator)
-      .toHaveText(`sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${
+      .toHaveText(`@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${
       commonPoints.startAt
     }, sketch001)
   |> xLine(length = ${commonPoints.num1})
@@ -119,10 +119,7 @@ async function doBasicSketch(
   await page.waitForTimeout(100)
 
   if (openPanes.includes('code')) {
-    await expect(
-      await u.getGreatestPixDiff(line1, TEST_COLORS.BLUE)
-    ).toBeLessThan(3)
-    await expect(await u.getGreatestPixDiff(line1, [0, 0, 255])).toBeLessThan(3)
+    expect(await u.getGreatestPixDiff(line1, TEST_COLORS.BLUE)).toBeLessThan(3)
   }
 
   // hold down shift
@@ -145,7 +142,7 @@ async function doBasicSketch(
   // Open the code pane.
   await u.openKclCodePanel()
   await expect(u.codeLocator)
-    .toHaveText(`sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${
+    .toHaveText(`@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${
     commonPoints.startAt
   }, sketch001)
   |> xLine(length = ${commonPoints.num1}, tag = $seg01)

e2e/playwright/boolean.spec.ts

@@ -0,0 +1,117 @@
+import { test, expect } from './zoo-test'
+import fs from 'node:fs/promises'
+import path from 'node:path'
+
+test.describe('Point and click for boolean workflows', () => {
+  // Boolean operations to test
+  const booleanOperations = [
+    {
+      name: 'union',
+      code: 'union([extrude001, extrude006])',
+    },
+    {
+      name: 'subtract',
+      code: 'subtract([extrude001], tools = [extrude006])',
+    },
+    {
+      name: 'intersect',
+      code: 'intersect([extrude001, extrude006])',
+    },
+  ] as const
+  for (let i = 0; i < booleanOperations.length; i++) {
+    const operation = booleanOperations[i]
+    const operationName = operation.name
+    const commandName = `Boolean ${
+      operationName.charAt(0).toUpperCase() + operationName.slice(1)
+    }`
+    test(`Create boolean operation -- ${operationName}`, async ({
+      context,
+      homePage,
+      cmdBar,
+      editor,
+      toolbar,
+      scene,
+      page,
+    }) => {
+      const file = await fs.readFile(
+        path.resolve(
+          __dirname,
+          '../../',
+          './rust/kcl-lib/e2e/executor/inputs/boolean-setup-with'
+        ),
+        'utf-8'
+      )
+      await context.addInitScript((file) => {
+        localStorage.setItem('persistCode', file)
+      }, file)
+      await homePage.goToModelingScene()
+      await scene.waitForExecutionDone()
+
+      await scene.settled(cmdBar)
+
+      // Test coordinates for selection - these might need adjustment based on actual scene layout
+      const cylinderPoint = { x: 592, y: 174 }
+      const secondObjectPoint = { x: 683, y: 273 }
+
+      // Create mouse helpers for selecting objects
+      const [clickFirstObject] = scene.makeMouseHelpers(
+        cylinderPoint.x,
+        cylinderPoint.y,
+        { steps: 10 }
+      )
+      const [clickSecondObject] = scene.makeMouseHelpers(
+        secondObjectPoint.x,
+        secondObjectPoint.y,
+        { steps: 10 }
+      )
+
+      await test.step(`Test ${operationName} operation`, async () => {
+        // Click the boolean operation button in the toolbar
+        await toolbar.selectBoolean(operationName)
+
+        // Verify command bar is showing the right command
+        await expect(cmdBar.page.getByTestId('command-name')).toContainText(
+          commandName
+        )
+
+        // Select first object in the scene, expect there to be a pixel diff from the selection color change
+        await clickFirstObject({ pixelDiff: 50 })
+
+        // For subtract, we need to proceed to the next step before selecting the second object
+        if (operationName !== 'subtract') {
+          // should down shift key to select multiple objects
+          await page.keyboard.down('Shift')
+        }
+
+        // Select second object
+        await clickSecondObject({ pixelDiff: 50 })
+
+        // Confirm the operation in the command bar
+        await cmdBar.progressCmdBar()
+
+        if (operationName === 'union' || operationName === 'intersect') {
+          await cmdBar.expectState({
+            stage: 'review',
+            headerArguments: {
+              Solids: '2 paths',
+            },
+            commandName,
+          })
+        } else if (operationName === 'subtract') {
+          await cmdBar.expectState({
+            stage: 'review',
+            headerArguments: {
+              Tool: '1 path',
+              Target: '1 path',
+            },
+            commandName,
+          })
+        }
+
+        await cmdBar.submit()
+
+        await editor.expectEditor.toContain(operation.code)
+      })
+    })
+  }
+})

e2e/playwright/can-create-sketches-on-all-planes-and-their-back-sides.spec.ts

@@ -46,7 +46,7 @@ test.describe(
         },
       }
 
-      const code = `sketch001 = startSketchOn(${plane})profile001 = startProfileAt([0.91, -1.22], sketch001)`
+      const code = `@settings(defaultLengthUnit = in)sketch001 = startSketchOn(${plane})profile001 = startProfileAt([0.91, -1.22], sketch001)`
 
       await u.openDebugPanel()
 

e2e/playwright/code-pane-and-errors.spec.ts

@@ -21,14 +21,15 @@ test.describe('Code pane and errors', { tag: ['@skipWin'] }, () => {
     await page.addInitScript(() => {
       localStorage.setItem(
         'persistCode',
-        `// Extruded Triangle
-  sketch001 = startSketchOn(XZ)
-    |> startProfileAt([0, 0], %)
-    |> line(end = [10, 0])
-    |> line(end = [-5, 10])
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()
-  extrude001 = extrude(sketch001, length = 5)`
+        `@settings(defaultLengthUnit = in)
+// Extruded Triangle
+sketch001 = startSketchOn(XZ)
+  |> startProfileAt([0, 0], %)
+  |> line(end = [10, 0])
+  |> line(end = [-5, 10])
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
+extrude001 = extrude(sketch001, length = 5)`
       )
     })
 
@@ -250,11 +251,11 @@ test(
       ])
       await Promise.all([
         fsp.copyFile(
-          executorInputPath('router-template-slate.kcl'),
+          executorInputPath('cylinder-inches.kcl'),
           join(routerTemplateDir, 'main.kcl')
         ),
         fsp.copyFile(
-          executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+          executorInputPath('e2e-can-sketch-on-chamfer.kcl'),
           join(bracketDir, 'main.kcl')
         ),
       ])

e2e/playwright/command-bar-tests.spec.ts

@@ -513,7 +513,8 @@ c = 3 + a`
     await homePage.openProject(projectName)
     // TODO: you probably shouldn't need an engine connection to add a parameter,
     // but you do because all modeling commands have that requirement
-    await scene.settled(cmdBar)
+    // Don't use scene.settled here
+    await expect(scene.startEditSketchBtn).toBeEnabled({ timeout: 15_000 })
 
     await test.step(`Create a parameter via command bar`, async () => {
       await cmdBar.cmdBarOpenBtn.click()
@@ -542,7 +543,12 @@ c = 3 + a`
     )
 
     const newValue = `2 * b + a`
+
     await test.step(`Edit the parameter via command bar`, async () => {
+      // TODO: make the command palette command registration more static, and the enabled state more dynamic
+      // so that we can just open the command palette and know all commands will be there.
+      await expect(scene.startEditSketchBtn).toBeEnabled()
+
       await cmdBar.cmdBarOpenBtn.click()
       await cmdBar.chooseCommand('edit parameter')
       await cmdBar.expectState({

e2e/playwright/desktop-export.spec.ts

@@ -20,11 +20,11 @@ test(
       await Promise.all([fsp.mkdir(bracketDir, { recursive: true })])
       await Promise.all([
         fsp.copyFile(
-          executorInputPath('router-template-slate.kcl'),
+          executorInputPath('cylinder-inches.kcl'),
           path.join(bracketDir, 'other.kcl')
         ),
         fsp.copyFile(
-          executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+          executorInputPath('e2e-can-sketch-on-chamfer.kcl'),
           path.join(bracketDir, 'main.kcl')
         ),
       ])
@@ -107,7 +107,7 @@ test(
             },
             { timeout: 15_000 }
           )
-          .toBeGreaterThan(300_000)
+          .toBeGreaterThan(30_000)
       })
     })
 
@@ -187,7 +187,7 @@ test(
             },
             { timeout: 15_000 }
           )
-          .toBeGreaterThan(70_000)
+          .toBeGreaterThan(50_000)
       })
     })
   }

e2e/playwright/editor-tests.spec.ts

@@ -32,26 +32,30 @@ test.describe('Editor tests', { tag: ['@skipWin'] }, () => {
     await page.keyboard.press('/')
     await page.keyboard.up('ControlOrMeta')
 
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn(XY)
+    await expect(page.locator('.cm-content')).toHaveText(
+      `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XY)
   |> startProfileAt([-10, -10], %)
   |> line(end = [20, 0])
   |> line(end = [0, 20])
   |> line(end = [-20, 0])
-  // |> close()`)
+  // |> close()`.replaceAll('\n', '')
+    )
 
     // uncomment the code
     await page.keyboard.down('ControlOrMeta')
     await page.keyboard.press('/')
     await page.keyboard.up('ControlOrMeta')
 
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn(XY)
+    await expect(page.locator('.cm-content')).toHaveText(
+      `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XY)
   |> startProfileAt([-10, -10], %)
   |> line(end = [20, 0])
   |> line(end = [0, 20])
   |> line(end = [-20, 0])
-  |> close()`)
+  |> close()`.replaceAll('\n', '')
+    )
   })
 
   test('ensure we use the cache, and do not re-execute', async ({
@@ -178,13 +182,15 @@ test.describe('Editor tests', { tag: ['@skipWin'] }, () => {
     await page.locator('#code-pane button:first-child').click()
     await page.locator('button:has-text("Format code")').click()
 
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn(XY)
+    await expect(page.locator('.cm-content')).toHaveText(
+      `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XY)
   |> startProfileAt([-10, -10], %)
   |> line(end = [20, 0])
   |> line(end = [0, 20])
   |> line(end = [-20, 0])
-  |> close()`)
+  |> close()`.replaceAll('\n', '')
+    )
   })
 
   test('if you click the format button it formats your code and executes so lints are still there', async ({
@@ -227,13 +233,15 @@ test.describe('Editor tests', { tag: ['@skipWin'] }, () => {
     await u.expectCmdLog('[data-message-type="execution-done"]')
     await u.closeDebugPanel()
 
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch_001 = startSketchOn(XY)
+    await expect(page.locator('.cm-content')).toHaveText(
+      `@settings(defaultLengthUnit = in)
+sketch_001 = startSketchOn(XY)
   |> startProfileAt([-10, -10], %)
   |> line(end = [20, 0])
   |> line(end = [0, 20])
   |> line(end = [-20, 0])
-  |> close()`)
+  |> close()`.replaceAll('\n', '')
+    )
 
     // error in guter
     await expect(page.locator('.cm-lint-marker-info').first()).toBeVisible()
@@ -471,6 +479,7 @@ test.describe('Editor tests', { tag: ['@skipWin'] }, () => {
   test('if you write kcl with lint errors you get lints', async ({
     page,
     homePage,
+    scene,
   }) => {
     const u = await getUtils(page)
     await page.setBodyDimensions({ width: 1000, height: 500 })
@@ -490,10 +499,7 @@ test.describe('Editor tests', { tag: ['@skipWin'] }, () => {
     await page.keyboard.press('ArrowLeft')
     await page.keyboard.press('ArrowRight')
 
-    // FIXME: lsp errors do not propagate to the frontend until engine is connected and code is executed
-    // This timeout is to wait for engine connection. LSP and code execution errors should be handled differently
-    // LSP can emit errors as fast as it waits and show them in the editor
-    await page.waitForTimeout(10000)
+    await scene.waitForExecutionDone()
 
     // error in guter
     await expect(page.locator('.cm-lint-marker-info').first()).toBeVisible()
@@ -815,10 +821,12 @@ test.describe('Editor tests', { tag: ['@skipWin'] }, () => {
       // there shouldn't be any auto complete options for 'lin' in the comment
       await expect(page.locator('.cm-completionLabel')).not.toBeVisible()
 
-      await expect(page.locator('.cm-content'))
-        .toHaveText(`sketch001 = startSketchOn(XZ)
+      await expect(page.locator('.cm-content')).toHaveText(
+        `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
         |> startProfileAt([3.14, 12], %)
-        |> xLine(%, length = 5) // lin`)
+        |> xLine(%, length = 5) // lin`.replaceAll('\n', '')
+      )
 
       // expect there to be no KCL errors
       await expect(page.locator('.cm-lint-marker-error')).toHaveCount(0)
@@ -888,10 +896,12 @@ test.describe('Editor tests', { tag: ['@skipWin'] }, () => {
       // there shouldn't be any auto complete options for 'lin' in the comment
       await expect(page.locator('.cm-completionLabel')).not.toBeVisible()
 
-      await expect(page.locator('.cm-content'))
-        .toHaveText(`sketch001 = startSketchOn(XZ)
+      await expect(page.locator('.cm-content')).toHaveText(
+        `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
         |> startProfileAt([3.14, 12], %)
-        |> xLine(%, length = 5) // lin`)
+        |> xLine(%, length = 5) // lin`.replaceAll('\n', '')
+      )
     })
   })
   test('Can undo a click and point extrude with ctrl+z', async ({
@@ -1206,4 +1216,55 @@ test.describe('Editor tests', { tag: ['@skipWin'] }, () => {
       })
     }
   )
+
+  test('Rectangle tool panning with middle click', async ({
+    page,
+    homePage,
+    toolbar,
+    scene,
+    cmdBar,
+    editor,
+  }) => {
+    await page.setBodyDimensions({ width: 1200, height: 900 })
+    await homePage.goToModelingScene()
+
+    // wait until scene is ready to be interacted with
+    await scene.connectionEstablished()
+    await scene.settled(cmdBar)
+
+    await page.getByRole('button', { name: 'Start Sketch' }).click()
+
+    // select an axis plane
+    await page.mouse.click(700, 200)
+
+    // Needed as we don't yet have a way to get a signal from the engine that the camera has animated to the sketch plane
+    await page.waitForTimeout(1000)
+
+    const middleMousePan = async (
+      startX: number,
+      startY: number,
+      endX: number,
+      endY: number
+    ) => {
+      const initialCode = await editor.getCurrentCode()
+
+      await page.mouse.click(startX, startY, { button: 'middle' })
+      await page.mouse.move(endX, endY, {
+        steps: 10,
+      })
+
+      // We expect the code to be the same, middle mouse click should not modify the code, only do panning
+      await editor.expectEditor.toBe(initialCode)
+    }
+
+    await test.step(`Verify corner rectangle panning`, async () => {
+      await page.getByTestId('corner-rectangle').click()
+      await middleMousePan(800, 500, 900, 600)
+    })
+
+    await test.step(`Verify center rectangle panning`, async () => {
+      await toolbar.selectCenterRectangle()
+      await middleMousePan(800, 200, 900, 300)
+    })
+  })
 })

e2e/playwright/file-tree.spec.ts

@@ -6,6 +6,7 @@ import {
   executorInputPath,
   getUtils,
   orRunWhenFullSuiteEnabled,
+  runningOnWindows,
 } from './test-utils'
 import { join } from 'path'
 import { FILE_EXT } from 'lib/constants'
@@ -15,6 +16,9 @@ test.describe('integrations tests', () => {
     'Creating a new file or switching file while in sketchMode should exit sketchMode',
     { tag: '@electron' },
     async ({ page, context, homePage, scene, editor, toolbar, cmdBar }) => {
+      if (runningOnWindows()) {
+        test.fixme(orRunWhenFullSuiteEnabled())
+      }
       await context.folderSetupFn(async (dir) => {
         const bracketDir = join(dir, 'test-sample')
         await fsp.mkdir(bracketDir, { recursive: true })

e2e/playwright/fixtures/editorFixture.ts

@@ -81,6 +81,13 @@ export class EditorFixture {
   expectEditor = {
     toContain: this._expectEditorToContain(),
     not: { toContain: this._expectEditorToContain(true) },
+    toBe: async (code: string) => {
+      const currentCode = await this.getCurrentCode()
+      return expect(currentCode).toBe(code)
+    },
+  }
+  getCurrentCode = async () => {
+    return await this.codeContent.innerText()
   }
   snapshot = async (options?: { timeout?: number; name?: string }) => {
     const wasPaneOpen = await this.checkIfPaneIsOpen()

e2e/playwright/fixtures/sceneFixture.ts

@@ -310,7 +310,9 @@ export async function expectPixelColor(
     .toBeTruthy()
     .catch((cause) => {
       throw new Error(
-        `ExpectPixelColor: expecting ${colour} got ${finalValue}`,
+        `ExpectPixelColor: point ${JSON.stringify(
+          coords
+        )} was expecting ${colour} but got ${finalValue}`,
         { cause }
       )
     })

e2e/playwright/fixtures/toolbarFixture.ts

@@ -181,6 +181,14 @@ export class ToolbarFixture {
     ).toBeVisible()
     await this.page.getByTestId('dropdown-center-rectangle').click()
   }
+  selectBoolean = async (operation: 'union' | 'subtract' | 'intersect') => {
+    await this.page
+      .getByRole('button', { name: 'caret down Union: open menu' })
+      .click()
+    const operationTestId = `dropdown-boolean-${operation}`
+    await expect(this.page.getByTestId(operationTestId)).toBeVisible()
+    await this.page.getByTestId(operationTestId).click()
+  }
 
   selectCircleThreePoint = async () => {
     await this.page

e2e/playwright/lib/console-error-whitelist.ts

@@ -257,6 +257,29 @@ export const isErrorWhitelisted = (exception: Error) => {
       project: 'Google Chrome',
       foundInSpec: 'e2e/playwright/testing-settings.spec.ts',
     },
+    // TODO: fix this error in the code
+    {
+      name: 'ReferenceError',
+      message: '_testUtils is not defined',
+      stack: '',
+      project: 'Google Chrome',
+      foundInSpec: 'e2e/playwright/snapshot-tests.spec.ts',
+    },
+    {
+      name: 'TypeError',
+      message: 'Failed to fetch',
+      stack: '',
+      project: 'Google Chrome',
+      foundInSpec: 'e2e/playwright/snapshot-tests.spec.ts',
+    },
+    {
+      name: 'Error',
+      message: 'The "path" argument must be of type string. Received undefined',
+      stack:
+        'Error: The "path" argument must be of type string. Received undefined',
+      project: 'Google Chrome',
+      foundInSpec: '', // many tests are impacted by this error
+    },
   ]
 
   const cleanString = (str: string) => str.replace(/[`"]/g, '')

e2e/playwright/machines.spec.ts

@@ -11,7 +11,7 @@ test(
       const bracketDir = join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+        executorInputPath('cylinder-inches.kcl'),
         join(bracketDir, 'main.kcl')
       )
     })
@@ -51,7 +51,7 @@ test(
       const bracketDir = join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+        executorInputPath('cylinder-inches.kcl'),
         join(bracketDir, 'main.kcl')
       )
     })

e2e/playwright/named-views.spec.ts

@@ -0,0 +1,292 @@
+import { test, expect } from './zoo-test'
+import { PROJECT_SETTINGS_FILE_NAME } from 'lib/constants'
+import * as fsp from 'fs/promises'
+import { join } from 'path'
+import {
+  createProject,
+  tomlToPerProjectSettings,
+  perProjectsettingsToToml,
+} from './test-utils'
+import { NamedView } from '@rust/kcl-lib/bindings/NamedView'
+
+// Helper function to determine if the file path on disk exists
+// Specifically this is used to check if project.toml exists on disk
+const fileExists = async (path: string) => {
+  return !!(await fsp
+    .stat(path)
+    .then((_) => true)
+    .catch((_) => false))
+}
+
+// Here are a few uuids.
+// When created named views rust will auto generate uuids and they will
+// never match the snapshots. Overwrite them in memory to these
+// values to have them match the snapshots.
+const uuid1: string = '0656fb1a-9640-473e-b334-591dc70c0138'
+const uuid2: string = 'c810cf04-c6cc-4a4a-8b11-17bf445dcab7'
+const uuid3: string = 'cfecbfee-48a6-4561-b96d-ffbe5678bb7d'
+
+// Look up the named view by name and then rewrite it with the same uuid each time
+const nameToUuid: Map<string, string> = new Map()
+nameToUuid.set('uuid1', uuid1)
+nameToUuid.set('uuid2', uuid2)
+nameToUuid.set('uuid3', uuid3)
+
+/**
+ * Given the project.toml string, overwrite the named views to be the constant uuid
+ * values to match the snapshots. The uuids are randomly generated
+ */
+function tomlStringOverWriteNamedViewUuids(toml: string): string {
+  const settings = tomlToPerProjectSettings(toml)
+  const namedViews = settings.settings?.app?.named_views
+  if (namedViews) {
+    const entries = Object.entries(namedViews)
+    const remappedNamedViews: { [key: string]: NamedView } = {}
+    entries.forEach(([_, value]) => {
+      if (value) {
+        // {name:'uuid1'} -> uuid1 lookup
+        const staticUuid = nameToUuid.get(value.name)
+        if (staticUuid) {
+          remappedNamedViews[staticUuid] = value
+        }
+      }
+    })
+    if (settings && settings.settings && settings.settings.app) {
+      settings.settings.app.named_views = remappedNamedViews
+    }
+  }
+  return perProjectsettingsToToml(settings)
+}
+
+test.describe('Named view tests', () => {
+  test('Verify project.toml is not created', async ({ page }, testInfo) => {
+    // Create project and load it
+    const projectName = 'named-views'
+    await createProject({ name: projectName, page })
+
+    // Generate file paths for project.toml
+    const projectDirName = testInfo.outputPath('electron-test-projects-dir')
+    const tempProjectSettingsFilePath = join(
+      projectDirName,
+      projectName,
+      PROJECT_SETTINGS_FILE_NAME
+    )
+
+    // project.toml should not exist on initial project creation
+    let exists = await fileExists(tempProjectSettingsFilePath)
+    expect(exists).toBe(false)
+  })
+  test('Verify named view gets created', async ({
+    cmdBar,
+    scene,
+    page,
+  }, testInfo) => {
+    const projectName = 'named-views'
+    const myNamedView = 'uuid1'
+
+    // Create and load project
+    await createProject({ name: projectName, page })
+    await scene.waitForExecutionDone()
+
+    // Create named view
+    const projectDirName = testInfo.outputPath('electron-test-projects-dir')
+    await cmdBar.openCmdBar()
+    await cmdBar.chooseCommand('create named view')
+    await cmdBar.argumentInput.fill(myNamedView)
+    await cmdBar.progressCmdBar(false)
+
+    // Generate paths for the project.toml
+    const tempProjectSettingsFilePath = join(
+      projectDirName,
+      projectName,
+      PROJECT_SETTINGS_FILE_NAME
+    )
+
+    // Expect project.toml to be generated on disk since a named view was created
+    await expect(async () => {
+      let exists = await fileExists(tempProjectSettingsFilePath)
+      expect(exists).toBe(true)
+    }).toPass()
+
+    // Read project.toml into memory
+    let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
+    // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
+    tomlString = tomlStringOverWriteNamedViewUuids(tomlString)
+
+    // Write the entire tomlString to a snapshot.
+    // There are many key/value pairs to check this is a safer match.
+    expect(tomlString).toMatchSnapshot('verify-named-view-gets-created')
+  })
+  test('Verify named view gets deleted', async ({
+    cmdBar,
+    scene,
+    page,
+  }, testInfo) => {
+    const projectName = 'named-views'
+    const myNamedView1 = 'uuid1'
+    const myNamedView2 = 'uuid2'
+
+    // Create project and go into the project
+    await createProject({ name: projectName, page })
+    await scene.waitForExecutionDone()
+
+    // Create a new named view
+    await cmdBar.openCmdBar()
+    await cmdBar.chooseCommand('create named view')
+    await cmdBar.argumentInput.fill(myNamedView1)
+    await cmdBar.progressCmdBar(false)
+
+    // Generate file paths for project.toml
+    const projectDirName = testInfo.outputPath('electron-test-projects-dir')
+    const tempProjectSettingsFilePath = join(
+      projectDirName,
+      projectName,
+      PROJECT_SETTINGS_FILE_NAME
+    )
+
+    // Except the project.toml to be written to disk since a named view was created
+    await expect(async () => {
+      let exists = await fileExists(tempProjectSettingsFilePath)
+      expect(exists).toBe(true)
+    }).toPass()
+
+    // Read project.toml into memory
+    let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
+    // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
+    tomlString = tomlStringOverWriteNamedViewUuids(tomlString)
+
+    // Write the entire tomlString to a snapshot.
+    // There are many key/value pairs to check this is a safer match.
+    expect(tomlString).toMatchSnapshot('verify-named-view-gets-created')
+
+    // Delete a named view
+    await cmdBar.openCmdBar()
+    await cmdBar.chooseCommand('delete named view')
+    cmdBar.selectOption({ name: myNamedView2 })
+    await cmdBar.progressCmdBar(false)
+
+    // Read project.toml into memory again since we deleted a named view
+    tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
+    // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
+    tomlString = tomlStringOverWriteNamedViewUuids(tomlString)
+
+    // // Write the entire tomlString to a snapshot.
+    // // There are many key/value pairs to check this is a safer match.
+    expect(tomlString).toMatchSnapshot('verify-named-view-gets-deleted')
+  })
+  test('Verify named view gets loaded', async ({
+    cmdBar,
+    scene,
+    page,
+  }, testInfo) => {
+    const projectName = 'named-views'
+    const myNamedView = 'uuid1'
+
+    // Create project and go into the project
+    await createProject({ name: projectName, page })
+    await scene.waitForExecutionDone()
+
+    // Create a new named view
+    await cmdBar.openCmdBar()
+    await cmdBar.chooseCommand('create named view')
+    await cmdBar.argumentInput.fill(myNamedView)
+    await cmdBar.progressCmdBar(false)
+
+    // Generate file paths for project.toml
+    const projectDirName = testInfo.outputPath('electron-test-projects-dir')
+    const tempProjectSettingsFilePath = join(
+      projectDirName,
+      projectName,
+      PROJECT_SETTINGS_FILE_NAME
+    )
+
+    // Except the project.toml to be written to disk since a named view was created
+    await expect(async () => {
+      let exists = await fileExists(tempProjectSettingsFilePath)
+      expect(exists).toBe(true)
+    }).toPass()
+
+    // Read project.toml into memory
+    let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
+    // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
+    tomlString = tomlStringOverWriteNamedViewUuids(tomlString)
+
+    // Write the entire tomlString to a snapshot.
+    // There are many key/value pairs to check this is a safer match.
+    expect(tomlString).toMatchSnapshot('verify-named-view-gets-created')
+
+    // Create a load a named view
+    await cmdBar.openCmdBar()
+    await cmdBar.chooseCommand('load named view')
+    await cmdBar.argumentInput.fill(myNamedView)
+    await cmdBar.progressCmdBar(false)
+
+    // Check the toast appeared
+    await expect(
+      page.getByText(`Named view ${myNamedView} loaded.`)
+    ).toBeVisible()
+  })
+  test('Verify two named views get created', async ({
+    cmdBar,
+    scene,
+    page,
+  }, testInfo) => {
+    const projectName = 'named-views'
+    const myNamedView1 = 'uuid1'
+    const myNamedView2 = 'uuid2'
+
+    // Create and load project
+    await createProject({ name: projectName, page })
+    await scene.waitForExecutionDone()
+
+    // Create named view
+    const projectDirName = testInfo.outputPath('electron-test-projects-dir')
+    await cmdBar.openCmdBar()
+    await cmdBar.chooseCommand('create named view')
+    await cmdBar.argumentInput.fill(myNamedView1)
+    await cmdBar.progressCmdBar(false)
+
+    await page.waitForTimeout(1000)
+
+    const orbitMouseStart = { x: 800, y: 130 }
+    const orbitMouseEnd = { x: 0, y: 130 }
+    await page.mouse.move(orbitMouseStart.x, orbitMouseStart.y)
+    await page.mouse.down({ button: 'middle' })
+    await page.mouse.move(orbitMouseEnd.x, orbitMouseEnd.y, {
+      steps: 3,
+    })
+    await page.mouse.up({ button: 'middle' })
+
+    await page.waitForTimeout(1000)
+
+    await cmdBar.openCmdBar()
+    await cmdBar.chooseCommand('create named view')
+    await cmdBar.argumentInput.fill(myNamedView2)
+    await cmdBar.progressCmdBar(false)
+
+    // Wait a moment for the project.toml to get written to disk with the new view point
+    await page.waitForTimeout(1000)
+
+    // Generate paths for the project.toml
+    const tempProjectSettingsFilePath = join(
+      projectDirName,
+      projectName,
+      PROJECT_SETTINGS_FILE_NAME
+    )
+
+    // Expect project.toml to be generated on disk since a named view was created
+    await expect(async () => {
+      let exists = await fileExists(tempProjectSettingsFilePath)
+      expect(exists).toBe(true)
+    }).toPass()
+
+    // Read project.toml into memory
+    let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
+    // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
+    tomlString = tomlStringOverWriteNamedViewUuids(tomlString)
+
+    // Write the entire tomlString to a snapshot.
+    // There are many key/value pairs to check this is a safer match.
+    expect(tomlString).toMatchSnapshot('verify-two-named-view-gets-created')
+  })
+})

e2e/playwright/named-views.spec.ts-snapshots/verify-named-view-gets-created-chromium-linux

@@ -0,0 +1,16 @@
+[settings]
+modeling = { }
+text_editor = { }
+command_bar = { }
+
+[settings.app.named_views.0656fb1a-9640-473e-b334-591dc70c0138]
+name = "uuid1"
+eye_offset = 1_378.0059
+fov_y = 45
+is_ortho = false
+ortho_scale_enabled = true
+ortho_scale_factor = 1.6
+pivot_position = [ 0, 0, 0 ]
+pivot_rotation = [ 0.5380994, 0.0, 0.0, 0.8428814 ]
+world_coord_system = "right_handed_up_z"
+version = 1

e2e/playwright/named-views.spec.ts-snapshots/verify-named-view-gets-deleted-chromium-linux

@@ -0,0 +1,16 @@
+[settings]
+modeling = { }
+text_editor = { }
+command_bar = { }
+
+[settings.app.named_views.0656fb1a-9640-473e-b334-591dc70c0138]
+name = "uuid1"
+eye_offset = 1_378.0059
+fov_y = 45
+is_ortho = false
+ortho_scale_enabled = true
+ortho_scale_factor = 1.6
+pivot_position = [ 0, 0, 0 ]
+pivot_rotation = [ 0.5380994, 0.0, 0.0, 0.8428814 ]
+world_coord_system = "right_handed_up_z"
+version = 1

e2e/playwright/named-views.spec.ts-snapshots/verify-two-named-view-gets-created-chromium-linux

@@ -0,0 +1,28 @@
+[settings]
+modeling = { }
+text_editor = { }
+command_bar = { }
+
+[settings.app.named_views.0656fb1a-9640-473e-b334-591dc70c0138]
+name = "uuid1"
+eye_offset = 1_378.0059
+fov_y = 45
+is_ortho = false
+ortho_scale_enabled = true
+ortho_scale_factor = 1.6
+pivot_position = [ 0, 0, 0 ]
+pivot_rotation = [ 0.5380994, 0.0, 0.0, 0.8428814 ]
+world_coord_system = "right_handed_up_z"
+version = 1
+
+[settings.app.named_views.c810cf04-c6cc-4a4a-8b11-17bf445dcab7]
+name = "uuid2"
+eye_offset = 1_378.0059
+fov_y = 45
+is_ortho = false
+ortho_scale_enabled = true
+ortho_scale_factor = 1.6
+pivot_position = [ 1_826.5239, 0.0, 0.0 ]
+pivot_rotation = [ 0.5380994, 0.0, 0.0, 0.8428814 ]
+world_coord_system = "right_handed_up_z"
+version = 1

e2e/playwright/native-file-menu.spec.ts

@@ -0,0 +1,312 @@
+import { test, expect } from './zoo-test'
+
+/**
+ * Not all menu actions are tested. Some are default electron menu actions.
+ * Test file menu actions that trigger something in the frontend
+ */
+test.describe('Native file menu', { tag: ['@electron'] }, () => {
+  test.describe('Home page', () => {
+    test.describe('File role', () => {
+      test('File.Create project', async ({ tronApp, cmdBar, page }) => {
+        if (!tronApp) fail()
+        // Run electron snippet to find the Menu!
+        await tronApp.electron.evaluate(async ({ app }) => {
+          if (!app || !app.applicationMenu) fail()
+          const newProject =
+            app.applicationMenu.getMenuItemById('File.New project')
+          if (!newProject) fail()
+          newProject.click()
+        })
+        // Check that the command bar is opened
+        await expect(cmdBar.cmdBarElement).toBeVisible()
+        // Check the placeholder project name exists
+        const actualArgument = await cmdBar.cmdBarElement
+          .getByTestId('cmd-bar-arg-value')
+          .inputValue()
+        const expectedArgument = 'project-$nnn'
+        expect(actualArgument).toBe(expectedArgument)
+      })
+      test('File.Open project', async ({ tronApp, cmdBar, page }) => {
+        if (!tronApp) fail()
+        // Run electron snippet to find the Menu!
+        await tronApp.electron.evaluate(async ({ app }) => {
+          if (!app || !app.applicationMenu) fail()
+          const openProject =
+            app.applicationMenu.getMenuItemById('File.Open project')
+          if (!openProject) fail()
+          openProject.click()
+        })
+        // Check that the command bar is opened
+        await expect(cmdBar.cmdBarElement).toBeVisible()
+        // Check the placeholder project name exists
+        const actual = await cmdBar.cmdBarElement
+          .getByTestId('command-name')
+          .textContent()
+        const expected = 'Open project'
+        expect(actual).toBe(expected)
+      })
+      test('File.Preferences.User settings', async ({
+        tronApp,
+        cmdBar,
+        page,
+      }) => {
+        if (!tronApp) fail()
+        // Run electron snippet to find the Menu!
+        await tronApp.electron.evaluate(async ({ app }) => {
+          if (!app || !app.applicationMenu) fail()
+          const userSettings = app.applicationMenu.getMenuItemById(
+            'File.Preferences.User settings'
+          )
+          if (!userSettings) fail()
+          userSettings.click()
+        })
+        const settings = page.getByTestId('settings-dialog-panel')
+        await expect(settings).toBeVisible()
+        // You are viewing the user tab
+        const actualText = settings.getByText(
+          'The overall appearance of the app'
+        )
+        await expect(actualText).toBeVisible()
+      })
+      test('File.Preferences.Keybindings', async ({
+        tronApp,
+        cmdBar,
+        page,
+      }) => {
+        if (!tronApp) fail()
+        // Run electron snippet to find the Menu!
+        await tronApp.electron.evaluate(async ({ app }) => {
+          if (!app || !app.applicationMenu) fail()
+          const keybindings = app.applicationMenu.getMenuItemById(
+            'File.Preferences.Keybindings'
+          )
+          if (!keybindings) fail()
+          keybindings.click()
+        })
+        const settings = page.getByTestId('settings-dialog-panel')
+        await expect(settings).toBeVisible()
+        // You are viewing the keybindings tab
+        const enterSketchMode = settings.locator('#enter-sketch-mode')
+        await expect(enterSketchMode).toBeVisible()
+      })
+      test('File.Preferences.User default units', async ({
+        tronApp,
+        cmdBar,
+        page,
+      }) => {
+        if (!tronApp) fail()
+        // Run electron snippet to find the Menu!
+        await tronApp.electron.evaluate(async ({ app }) => {
+          if (!app || !app.applicationMenu) fail()
+          const menu = app.applicationMenu.getMenuItemById(
+            'File.Preferences.User default units'
+          )
+          if (!menu) fail()
+          menu.click()
+        })
+        const settings = page.getByTestId('settings-dialog-panel')
+        await expect(settings).toBeVisible()
+        const defaultUnit = settings.locator('#defaultUnit')
+        await expect(defaultUnit).toBeVisible()
+      })
+      test('File.Preferences.Theme', async ({ tronApp, cmdBar, page }) => {
+        if (!tronApp) fail()
+        // Run electron snippet to find the Menu!
+        await tronApp.electron.evaluate(async ({ app }) => {
+          if (!app || !app.applicationMenu) fail()
+          const menu = app.applicationMenu.getMenuItemById(
+            'File.Preferences.Theme'
+          )
+          if (!menu) fail()
+          menu.click()
+        })
+        // Check that the command bar is opened
+        await expect(cmdBar.cmdBarElement).toBeVisible()
+        // Check the placeholder project name exists
+        const actual = await cmdBar.cmdBarElement
+          .getByTestId('command-name')
+          .textContent()
+        const expected = 'Settings · app · theme'
+        expect(actual).toBe(expected)
+      })
+      test('File.Preferences.Theme color', async ({
+        tronApp,
+        cmdBar,
+        page,
+      }) => {
+        if (!tronApp) fail()
+        // Run electron snippet to find the Menu!
+        await tronApp.electron.evaluate(async ({ app }) => {
+          if (!app || !app.applicationMenu) fail()
+          const menu = app.applicationMenu.getMenuItemById(
+            'File.Preferences.Theme color'
+          )
+          if (!menu) fail()
+          menu.click()
+        })
+        const settings = page.getByTestId('settings-dialog-panel')
+        await expect(settings).toBeVisible()
+        const defaultUnit = settings.locator('#themeColor')
+        await expect(defaultUnit).toBeVisible()
+      })
+      test('File.Preferences.Sign out', async ({ tronApp, cmdBar, page }) => {
+        if (!tronApp) fail()
+        // Run electron snippet to find the Menu!
+        await tronApp.electron.evaluate(async ({ app }) => {
+          if (!app || !app.applicationMenu) fail()
+          const menu = app.applicationMenu.getMenuItemById('File.Sign out')
+          if (!menu) fail()
+          // FIXME: Add back when you can actually sign out
+          // menu.click()
+        })
+        // FIXME: When signing out during E2E the page is not bound correctly.
+        // It cannot find the button
+        // const signIn = page.getByTestId('sign-in-button')
+        // await expect(signIn).toBeVisible()
+      })
+    })
+
+    test.describe('Edit role', () => {
+      test('Edit.Rename project', async ({ tronApp, cmdBar, page }) => {
+        if (!tronApp) fail()
+        // Run electron snippet to find the Menu!
+        await tronApp.electron.evaluate(async ({ app }) => {
+          if (!app || !app.applicationMenu) fail()
+          const menu = app.applicationMenu.getMenuItemById(
+            'Edit.Rename project'
+          )
+          if (!menu) fail()
+          menu.click()
+        })
+        // Check the placeholder project name exists
+        const actual = await cmdBar.cmdBarElement
+          .getByTestId('command-name')
+          .textContent()
+        const expected = 'Rename project'
+        expect(actual).toBe(expected)
+      })
+      test('Edit.Delete project', async ({ tronApp, cmdBar, page }) => {
+        if (!tronApp) fail()
+        // Run electron snippet to find the Menu!
+        await tronApp.electron.evaluate(async ({ app }) => {
+          if (!app || !app.applicationMenu) fail()
+          const menu = app.applicationMenu.getMenuItemById(
+            'Edit.Delete project'
+          )
+          if (!menu) fail()
+          menu.click()
+        })
+        // Check the placeholder project name exists
+        const actual = await cmdBar.cmdBarElement
+          .getByTestId('command-name')
+          .textContent()
+        const expected = 'Delete project'
+        expect(actual).toBe(expected)
+      })
+      test('Edit.Change project directory', async ({
+        tronApp,
+        cmdBar,
+        page,
+      }) => {
+        if (!tronApp) fail()
+        // Run electron snippet to find the Menu!
+        await tronApp.electron.evaluate(async ({ app }) => {
+          if (!app || !app.applicationMenu) fail()
+          const menu = app.applicationMenu.getMenuItemById(
+            'Edit.Change project directory'
+          )
+          if (!menu) fail()
+          menu.click()
+        })
+        const settings = page.getByTestId('settings-dialog-panel')
+        await expect(settings).toBeVisible()
+        const projectDirectory = settings.locator('#projectDirectory')
+        await expect(projectDirectory).toBeVisible()
+      })
+    })
+    test.describe('View role', () => {
+      test('View.Command Palette...', async ({ tronApp, cmdBar, page }) => {
+        if (!tronApp) fail()
+        // Run electron snippet to find the Menu!
+        await tronApp.electron.evaluate(async ({ app }) => {
+          if (!app || !app.applicationMenu) fail()
+          const menu = app.applicationMenu.getMenuItemById(
+            'View.Command Palette...'
+          )
+          if (!menu) fail()
+          menu.click()
+        })
+        // Check the placeholder project name exists
+        const actual = cmdBar.cmdBarElement.getByTestId('cmd-bar-search')
+        await expect(actual).toBeVisible()
+      })
+    })
+    test.describe('Help role', () => {
+      test('Help.Show all commands', async ({ tronApp, cmdBar, page }) => {
+        if (!tronApp) fail()
+        // Run electron snippet to find the Menu!
+        await tronApp.electron.evaluate(async ({ app }) => {
+          if (!app || !app.applicationMenu) fail()
+          const menu = app.applicationMenu.getMenuItemById(
+            'Help.Show all commands'
+          )
+          if (!menu) fail()
+          menu.click()
+        })
+        // Check the placeholder project name exists
+        const actual = cmdBar.cmdBarElement.getByTestId('cmd-bar-search')
+        await expect(actual).toBeVisible()
+      })
+      test('Help.KCL code samples', async ({ tronApp, cmdBar, page }) => {
+        if (!tronApp) fail()
+        // Run electron snippet to find the Menu!
+        await tronApp.electron.evaluate(async ({ app }) => {
+          if (!app || !app.applicationMenu) fail()
+          const menu = app.applicationMenu.getMenuItemById(
+            'Help.KCL code samples'
+          )
+          if (!menu) fail()
+        })
+      })
+      test('Help.Refresh and report a bug', async ({
+        tronApp,
+        cmdBar,
+        page,
+      }) => {
+        if (!tronApp) fail()
+        // Run electron snippet to find the Menu!
+        await tronApp.electron.evaluate(async ({ app }) => {
+          if (!app || !app.applicationMenu) fail()
+          const menu = app.applicationMenu.getMenuItemById(
+            'Help.Refresh and report a bug'
+          )
+          if (!menu) fail()
+          menu.click()
+        })
+        // Core dump and refresh magic number timeout
+        await page.waitForTimeout(7000)
+        const actual = page.getByText(
+          'No Projects found, ready to make your first one?'
+        )
+        await expect(actual).toBeVisible()
+      })
+      test('Help.Reset onboarding', async ({ tronApp, cmdBar, page }) => {
+        if (!tronApp) fail()
+        // Run electron snippet to find the Menu!
+        await tronApp.electron.evaluate(async ({ app }) => {
+          if (!app || !app.applicationMenu) fail()
+          const menu = app.applicationMenu.getMenuItemById(
+            'Help.Reset onboarding'
+          )
+          if (!menu) fail()
+          menu.click()
+        })
+
+        const actual = page.getByText(
+          `This is a hardware design tool that lets you edit visually, with code, or both. It's powered by the KittyCAD Design API, the first API created for anyone to build hardware design tools.`
+        )
+        await expect(actual).toBeVisible()
+      })
+    })
+  })
+})

e2e/playwright/onboarding-tests.spec.ts

@@ -230,9 +230,9 @@ test.describe('Onboarding tests', () => {
 
     // Override beforeEach test setup
     await context.addInitScript(
-      async ({ settingsKey, settings }) => {
+      async ({ settingsKey, settings, code }) => {
         // Give some initial code, so we can test that it's cleared
-        localStorage.setItem('persistCode', originalCode)
+        localStorage.setItem('persistCode', code)
         localStorage.setItem(settingsKey, settings)
       },
       {
@@ -240,6 +240,7 @@ test.describe('Onboarding tests', () => {
         settings: settingsToToml({
           settings: TEST_SETTINGS_ONBOARDING_EXPORT,
         }),
+        code: originalCode,
       }
     )
 

e2e/playwright/point-click.spec.ts

@@ -137,7 +137,7 @@ test.describe('Point-and-click tests', () => {
 
         await scene.moveCameraTo(cameraPos, cameraTarget)
 
-        await test.step('check chamfer selection changes cursor positon', async () => {
+        await test.step('check chamfer selection changes cursor position', async () => {
           await expect(async () => {
             // sometimes initial click doesn't register
             await clickChamfer()
@@ -173,7 +173,7 @@ test.describe('Point-and-click tests', () => {
         })
         await test.step('Check there is no errors after code created in previous steps executes', async () => {
           await editor.expectState({
-            activeLines: ['sketch001 = startSketchOn(XZ)'],
+            activeLines: ['@settings(defaultLengthUnit = in)'],
             highlightedCode: '',
             diagnostics: [],
           })
@@ -299,7 +299,8 @@ test.describe('Point-and-click tests', () => {
 
       await test.step('verify at the end of the test that final code is what is expected', async () => {
         await editor.expectEditor.toContain(
-          `sketch001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([75.8, 317.2], %) // [$startCapTag, $EndCapTag]
   |> angledLine([0, 268.43], %, $rectangleSegmentA001)
   |> angledLine([
@@ -369,7 +370,7 @@ profile001 = startProfileAt([205.96, 254.59], sketch002)
       })
     })
 
-    test('Works on chamfers that are non in a pipeExpression can break up multi edges in a chamfer array', async ({
+    test('Works on chamfers that are not in a pipeExpression can break up multi edges in a chamfer array', async ({
       context,
       page,
       homePage,
@@ -418,7 +419,8 @@ profile001 = startProfileAt([205.96, 254.59], sketch002)
         |>close()`,
       })
       await editor.expectEditor.toContain(
-        `sketch001 = startSketchOn(XZ)
+        `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([75.8, 317.2], %)
   |> angledLine([0, 268.43], %, $rectangleSegmentA001)
   |> angledLine([
@@ -1071,7 +1073,7 @@ openSketch = startSketchOn(XY)
     })
   })
 
-  test('Helix point-and-click', async ({
+  test('Helix point-and-click on default axis', async ({
     context,
     page,
     homePage,
@@ -1082,29 +1084,25 @@ openSketch = startSketchOn(XY)
   }) => {
     // One dumb hardcoded screen pixel value
     const testPoint = { x: 620, y: 257 }
-    const expectedOutput = `helix001 = helix(  revolutions = 1,  angleStart = 360,  counterClockWise = false,  radius = 5,  axis = 'X',  length = 5,)`
-    const expectedLine = `revolutions=1,`
+    const expectedOutput = `helix001 = helix(  axis = 'X',  radius = 5,  length = 5,  revolutions = 1,  angleStart = 360,  ccw = false,)`
+    const expectedLine = `axis='X',`
 
     await homePage.goToModelingScene()
 
-    // await test.step(`Look for the red of the default plane`, async () => {
-    //   await scene.expectPixelColor([96, 52, 52], testPoint, 15)
-    // })
     await test.step(`Go through the command bar flow`, async () => {
       await toolbar.helixButton.click()
       await cmdBar.expectState({
         stage: 'arguments',
-        currentArgKey: 'revolutions',
-        currentArgValue: '1',
+        currentArgKey: 'mode',
+        currentArgValue: '',
         headerArguments: {
+          Mode: '',
           AngleStart: '',
-          Axis: '',
-          CounterClockWise: '',
-          Length: '',
-          Radius: '',
           Revolutions: '',
+          Radius: '',
+          CounterClockWise: '',
         },
-        highlightedHeaderArg: 'revolutions',
+        highlightedHeaderArg: 'mode',
         commandName: 'Helix',
       })
       await cmdBar.progressCmdBar()
@@ -1113,6 +1111,19 @@ openSketch = startSketchOn(XY)
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
+      await cmdBar.expectState({
+        stage: 'review',
+        headerArguments: {
+          Mode: 'Axis',
+          Axis: 'X',
+          AngleStart: '360',
+          Revolutions: '1',
+          Length: '5',
+          Radius: '5',
+          CounterClockWise: '',
+        },
+        commandName: 'Helix',
+      })
       await cmdBar.progressCmdBar()
     })
 
@@ -1136,30 +1147,31 @@ openSketch = startSketchOn(XY)
       await cmdBar.expectState({
         commandName: 'Helix',
         stage: 'arguments',
-        currentArgKey: 'length',
-        currentArgValue: initialInput,
+        currentArgKey: 'CounterClockWise',
+        currentArgValue: '',
         headerArguments: {
-          AngleStart: '360',
           Axis: 'X',
-          CounterClockWise: '',
-          Length: initialInput,
-          Radius: '5',
+          AngleStart: '360',
           Revolutions: '1',
+          Radius: '5',
+          Length: initialInput,
+          CounterClockWise: '',
         },
-        highlightedHeaderArg: 'length',
+        highlightedHeaderArg: 'CounterClockWise',
       })
+      await page.keyboard.press('Shift+Backspace')
       await expect(cmdBar.currentArgumentInput).toBeVisible()
       await cmdBar.currentArgumentInput.locator('.cm-content').fill(newInput)
       await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         stage: 'review',
         headerArguments: {
-          AngleStart: '360',
           Axis: 'X',
-          CounterClockWise: '',
-          Length: newInput,
-          Radius: '5',
+          AngleStart: '360',
           Revolutions: '1',
+          Radius: '5',
+          Length: newInput,
+          CounterClockWise: '',
         },
         commandName: 'Helix',
       })
@@ -1179,6 +1191,295 @@ openSketch = startSketchOn(XY)
     })
   })
 
+  const helixCases = [
+    {
+      selectionType: 'segment',
+      testPoint: { x: 513, y: 221 },
+      expectedOutput: `helix001 = helix(  axis = seg01,  radius = 1,  revolutions = 20,  angleStart = 0,  ccw = false,)`,
+      expectedEditedOutput: `helix001 = helix(  axis = seg01,  radius = 5,  revolutions = 20,  angleStart = 0,  ccw = false,)`,
+    },
+    {
+      selectionType: 'sweepEdge',
+      testPoint: { x: 564, y: 364 },
+      expectedOutput: `helix001 = helix(  axis =   getOppositeEdge(seg01),  radius = 1,  revolutions = 20,  angleStart = 0,  ccw = false,)`,
+      expectedEditedOutput: `helix001 = helix(  axis =   getOppositeEdge(seg01),  radius = 5,  revolutions = 20,  angleStart = 0,  ccw = false,)`,
+    },
+  ]
+  helixCases.map(
+    ({ selectionType, testPoint, expectedOutput, expectedEditedOutput }) => {
+      test(`Helix point-and-click around ${selectionType}`, async ({
+        context,
+        page,
+        homePage,
+        scene,
+        editor,
+        toolbar,
+        cmdBar,
+      }) => {
+        page.on('console', console.log)
+        const initialCode = `sketch001 = startSketchOn('XZ')
+  profile001 = startProfileAt([0, 0], sketch001)
+    |> yLine(length = 100)
+    |> line(endAbsolute = [100, 0])
+    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+    |> close()
+  extrude001 = extrude(profile001, length = 100)`
+
+        // One dumb hardcoded screen pixel value
+        const [clickOnEdge] = scene.makeMouseHelpers(testPoint.x, testPoint.y)
+
+        await context.addInitScript((initialCode) => {
+          localStorage.setItem('persistCode', initialCode)
+        }, initialCode)
+        await page.setBodyDimensions({ width: 1000, height: 500 })
+        await homePage.goToModelingScene()
+
+        await test.step(`Go through the command bar flow`, async () => {
+          await toolbar.closePane('code')
+          await toolbar.helixButton.click()
+          await cmdBar.expectState({
+            stage: 'arguments',
+            currentArgKey: 'mode',
+            currentArgValue: '',
+            headerArguments: {
+              AngleStart: '',
+              Mode: '',
+              CounterClockWise: '',
+              Radius: '',
+              Revolutions: '',
+            },
+            highlightedHeaderArg: 'mode',
+            commandName: 'Helix',
+          })
+          await cmdBar.selectOption({ name: 'Edge' }).click()
+          await clickOnEdge()
+          await cmdBar.progressCmdBar()
+          await cmdBar.argumentInput.focus()
+          await page.keyboard.insertText('20')
+          await cmdBar.progressCmdBar()
+          await page.keyboard.insertText('0')
+          await cmdBar.progressCmdBar()
+          await page.keyboard.insertText('1')
+          await cmdBar.progressCmdBar()
+          await cmdBar.expectState({
+            stage: 'review',
+            headerArguments: {
+              Mode: 'Edge',
+              Edge: `1 ${selectionType}`,
+              AngleStart: '0',
+              Revolutions: '20',
+              Radius: '1',
+              CounterClockWise: '',
+            },
+            commandName: 'Helix',
+          })
+          await cmdBar.progressCmdBar()
+        })
+
+        await test.step(`Confirm code is added to the editor, scene has changed`, async () => {
+          await toolbar.openPane('code')
+          await editor.expectEditor.toContain(expectedOutput)
+          await toolbar.closePane('code')
+        })
+
+        await test.step(`Edit helix through the feature tree`, async () => {
+          await toolbar.openPane('feature-tree')
+          const operationButton = await toolbar.getFeatureTreeOperation(
+            'Helix',
+            0
+          )
+          await operationButton.dblclick()
+          const initialInput = '1'
+          const newInput = '5'
+          await cmdBar.expectState({
+            commandName: 'Helix',
+            stage: 'arguments',
+            currentArgKey: 'CounterClockWise',
+            currentArgValue: '',
+            headerArguments: {
+              AngleStart: '0',
+              Revolutions: '20',
+              Radius: initialInput,
+              CounterClockWise: '',
+            },
+            highlightedHeaderArg: 'CounterClockWise',
+          })
+          await page
+            .getByRole('button', { name: 'radius', exact: false })
+            .click()
+          await expect(cmdBar.currentArgumentInput).toBeVisible()
+          await cmdBar.currentArgumentInput
+            .locator('.cm-content')
+            .fill(newInput)
+          await cmdBar.progressCmdBar()
+          await cmdBar.expectState({
+            stage: 'review',
+            headerArguments: {
+              AngleStart: '0',
+              Revolutions: '20',
+              Radius: newInput,
+              CounterClockWise: '',
+            },
+            commandName: 'Helix',
+          })
+          await cmdBar.progressCmdBar()
+          await toolbar.closePane('feature-tree')
+          await toolbar.openPane('code')
+          await editor.expectEditor.toContain(expectedEditedOutput)
+          await toolbar.closePane('code')
+        })
+
+        await test.step('Delete helix via feature tree selection', async () => {
+          await toolbar.openPane('feature-tree')
+          const operationButton = await toolbar.getFeatureTreeOperation(
+            'Helix',
+            0
+          )
+          await operationButton.click({ button: 'left' })
+          await page.keyboard.press('Delete')
+          await editor.expectEditor.not.toContain(expectedEditedOutput)
+          await expect(
+            await toolbar.getFeatureTreeOperation('Helix', 0)
+          ).not.toBeVisible()
+        })
+      })
+    }
+  )
+
+  test('Helix point-and-click on cylinder', async ({
+    context,
+    page,
+    homePage,
+    scene,
+    editor,
+    toolbar,
+    cmdBar,
+  }) => {
+    const initialCode = `sketch001 = startSketchOn(XY)
+profile001 = circle(
+  sketch001,
+  center = [0, 0],
+  radius = 100,
+  tag = $seg01,
+)
+extrude001 = extrude(profile001, length = 100)
+    `
+    await context.addInitScript((initialCode) => {
+      localStorage.setItem('persistCode', initialCode)
+    }, initialCode)
+    await page.setBodyDimensions({ width: 1000, height: 500 })
+    await homePage.goToModelingScene()
+    await scene.waitForExecutionDone()
+
+    // One dumb hardcoded screen pixel value
+    const testPoint = { x: 620, y: 257 }
+    const [clickOnWall] = scene.makeMouseHelpers(testPoint.x, testPoint.y)
+    const expectedOutput = `helix001 = helix(  cylinder = extrude001,  revolutions = 1,  angleStart = 360,  ccw = false,)`
+    const expectedLine = `cylinder = extrude001,`
+    const expectedEditedOutput = `helix001 = helix(  cylinder = extrude001,  revolutions = 1,  angleStart = 360,  ccw = true,)`
+
+    await test.step(`Go through the command bar flow`, async () => {
+      await toolbar.helixButton.click()
+      await cmdBar.expectState({
+        stage: 'arguments',
+        currentArgKey: 'mode',
+        currentArgValue: '',
+        headerArguments: {
+          Mode: '',
+          AngleStart: '',
+          Revolutions: '',
+          Radius: '',
+          CounterClockWise: '',
+        },
+        highlightedHeaderArg: 'mode',
+        commandName: 'Helix',
+      })
+      await cmdBar.selectOption({ name: 'Cylinder' }).click()
+      await cmdBar.expectState({
+        stage: 'arguments',
+        currentArgKey: 'cylinder',
+        currentArgValue: '',
+        headerArguments: {
+          Mode: 'Cylinder',
+          Cylinder: '',
+          AngleStart: '',
+          Revolutions: '',
+          CounterClockWise: '',
+        },
+        highlightedHeaderArg: 'cylinder',
+        commandName: 'Helix',
+      })
+      await clickOnWall()
+      await cmdBar.progressCmdBar()
+      await cmdBar.progressCmdBar()
+      await cmdBar.progressCmdBar()
+      await cmdBar.expectState({
+        stage: 'review',
+        headerArguments: {
+          Mode: 'Cylinder',
+          Cylinder: '1 face',
+          AngleStart: '360',
+          Revolutions: '1',
+          CounterClockWise: '',
+        },
+        commandName: 'Helix',
+      })
+      await cmdBar.progressCmdBar()
+    })
+
+    await test.step(`Confirm code is added to the editor, scene has changed`, async () => {
+      await editor.expectEditor.toContain(expectedOutput)
+      await editor.expectState({
+        diagnostics: [],
+        activeLines: [expectedLine],
+        highlightedCode: '',
+      })
+    })
+
+    await test.step(`Edit helix through the feature tree`, async () => {
+      await editor.closePane()
+      const operationButton = await toolbar.getFeatureTreeOperation('Helix', 0)
+      await operationButton.dblclick()
+      await cmdBar.expectState({
+        commandName: 'Helix',
+        stage: 'arguments',
+        currentArgKey: 'CounterClockWise',
+        currentArgValue: '',
+        headerArguments: {
+          AngleStart: '360',
+          Revolutions: '1',
+          CounterClockWise: '',
+        },
+        highlightedHeaderArg: 'CounterClockWise',
+      })
+      await cmdBar.selectOption({ name: 'True' }).click()
+      await cmdBar.expectState({
+        stage: 'review',
+        headerArguments: {
+          AngleStart: '360',
+          Revolutions: '1',
+          CounterClockWise: 'true',
+        },
+        commandName: 'Helix',
+      })
+      await cmdBar.progressCmdBar()
+      await toolbar.closePane('feature-tree')
+      await toolbar.openPane('code')
+      await editor.expectEditor.toContain(expectedEditedOutput)
+      await editor.closePane()
+    })
+
+    await test.step('Delete helix via feature tree selection', async () => {
+      await toolbar.openPane('feature-tree')
+      const operationButton = await toolbar.getFeatureTreeOperation('Helix', 0)
+      await operationButton.click({ button: 'left' })
+      await page.keyboard.press('Delete')
+      await toolbar.closePane('feature-tree')
+      await toolbar.openPane('code')
+      await editor.expectEditor.not.toContain(expectedEditedOutput)
+    })
+  })
+
   const loftPointAndClickCases = [
     { shouldPreselect: true },
     { shouldPreselect: false },
@@ -1340,9 +1641,10 @@ loft001 = loft([sketch001, sketch002])
     {
       targetType: 'circle',
       testPoint: { x: 700, y: 250 },
-      initialCode: `sketch001 = startSketchOn('YZ')
+      initialCode: `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(YZ)
 profile001 = circle(sketch001, center = [0, 0], radius = 500)
-sketch002 = startSketchOn('XZ')
+sketch002 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> xLine(length = -500)
   |> tangentialArcTo([-2000, 500], %)`,
@@ -1350,7 +1652,8 @@ sketch002 = startSketchOn('XZ')
     {
       targetType: 'rectangle',
       testPoint: { x: 710, y: 255 },
-      initialCode: `sketch001 = startSketchOn('YZ')
+      initialCode: `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(YZ)
 profile001 = startProfileAt([-400, -400], sketch001)
   |> angledLine([0, 800], %, $rectangleSegmentA001)
   |> angledLine([
@@ -1363,7 +1666,7 @@ profile001 = startProfileAt([-400, -400], sketch001)
      ], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-sketch002 = startSketchOn('XZ')
+sketch002 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> xLine(length = -500)
   |> tangentialArcTo([-2000, 500], %)`,
@@ -1507,7 +1810,8 @@ sketch002 = startSketchOn('XZ')
     toolbar,
     cmdBar,
   }) => {
-    const initialCode = `sketch001 = startSketchOn(YZ)
+    const initialCode = `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(YZ)
   |> circle(
        center = [0, 0],
        radius = 500
@@ -1616,7 +1920,7 @@ extrude001 = extrude(sketch001, length = -12)
     const filletColor: [number, number, number] = [127, 127, 127]
     const backgroundColor: [number, number, number] = [30, 30, 30]
     const lowTolerance = 20
-    const highTolerance = 40
+    const highTolerance = 70 // TODO: understand why I needed that for edgeColorYellow on macos (local)
 
     // Setup
     await test.step(`Initial test setup`, async () => {
@@ -1703,6 +2007,54 @@ extrude001 = extrude(sketch001, length = -12)
       await scene.expectPixelColor(filletColor, firstEdgeLocation, lowTolerance)
     })
 
+    // Test 1.1: Edit fillet (segment type)
+    async function editFillet(
+      featureTreeIndex: number,
+      oldValue: string,
+      newValue: string
+    ) {
+      await toolbar.openPane('feature-tree')
+      const operationButton = await toolbar.getFeatureTreeOperation(
+        'Fillet',
+        featureTreeIndex
+      )
+      await operationButton.dblclick({ button: 'left' })
+      await cmdBar.expectState({
+        commandName: 'Fillet',
+        currentArgKey: 'radius',
+        currentArgValue: oldValue,
+        headerArguments: {
+          Radius: oldValue,
+        },
+        highlightedHeaderArg: 'radius',
+        stage: 'arguments',
+      })
+      await page.keyboard.insertText(newValue)
+      await cmdBar.progressCmdBar()
+      await cmdBar.expectState({
+        stage: 'review',
+        headerArguments: {
+          Radius: newValue,
+        },
+        commandName: 'Fillet',
+      })
+      await cmdBar.progressCmdBar()
+      await toolbar.closePane('feature-tree')
+    }
+
+    await test.step('Edit fillet via feature tree selection works', async () => {
+      const firstFilletFeatureTreeIndex = 0
+      const editedRadius = '1'
+      await editFillet(firstFilletFeatureTreeIndex, '5', editedRadius)
+      await editor.expectEditor.toContain(
+        firstFilletDeclaration.replace('radius = 5', 'radius = ' + editedRadius)
+      )
+
+      // Edit back to original radius
+      await editFillet(firstFilletFeatureTreeIndex, editedRadius, '5')
+      await editor.expectEditor.toContain(firstFilletDeclaration)
+    })
+
     // Test 2: Command bar flow without preselected edges
     await test.step(`Open fillet UI without selecting edges`, async () => {
       await page.waitForTimeout(100)
@@ -1787,6 +2139,23 @@ extrude001 = extrude(sketch001, length = -12)
       )
     })
 
+    // Test 2.1: Edit fillet (edgeSweep type)
+    await test.step('Edit fillet via feature tree selection works', async () => {
+      const secondFilletFeatureTreeIndex = 1
+      const editedRadius = '2'
+      await editFillet(secondFilletFeatureTreeIndex, '5', editedRadius)
+      await editor.expectEditor.toContain(
+        secondFilletDeclaration.replace(
+          'radius = 5',
+          'radius = ' + editedRadius
+        )
+      )
+
+      // Edit back to original radius
+      await editFillet(secondFilletFeatureTreeIndex, editedRadius, '5')
+      await editor.expectEditor.toContain(secondFilletDeclaration)
+    })
+
     // Test 3: Delete fillets
     await test.step('Delete fillet via feature tree selection', async () => {
       await test.step('Open Feature Tree Pane', async () => {
@@ -1809,6 +2178,43 @@ extrude001 = extrude(sketch001, length = -12)
     })
   })
 
+  test(`Fillet point-and-click edit rejected when not in pipe`, async ({
+    context,
+    page,
+    homePage,
+    scene,
+    toolbar,
+  }) => {
+    const initialCode = `sketch001 = startSketchOn(XY)
+profile001 = circle(
+  sketch001,
+  center = [0, 0],
+  radius = 100,
+  tag = $seg01,
+)
+extrude001 = extrude(profile001, length = 100)
+fillet001 = fillet(extrude001, radius = 5, tags = [getOppositeEdge(seg01)])
+`
+    await context.addInitScript((initialCode) => {
+      localStorage.setItem('persistCode', initialCode)
+    }, initialCode)
+    await page.setBodyDimensions({ width: 1000, height: 500 })
+    await homePage.goToModelingScene()
+    await scene.waitForExecutionDone()
+
+    await test.step('Double-click in feature tree and expect error toast', async () => {
+      await toolbar.openPane('feature-tree')
+      const operationButton = await toolbar.getFeatureTreeOperation('Fillet', 0)
+      await operationButton.dblclick({ button: 'left' })
+      await expect(
+        page.getByText(
+          'Only chamfer and fillet in pipe expressions are supported for edits'
+        )
+      ).toBeVisible()
+      await page.waitForTimeout(1000)
+    })
+  })
+
   test(`Fillet point-and-click delete`, async ({
     context,
     page,
@@ -2074,7 +2480,8 @@ extrude001 = extrude(profile001, length = 5)
     cmdBar,
   }) => {
     // Code samples
-    const initialCode = `sketch001 = startSketchOn(XY)
+    const initialCode = `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XY)
   |> startProfileAt([-12, -6], %)
   |> line(end = [0, 12])
   |> line(end = [24, 0])
@@ -2105,7 +2512,7 @@ extrude001 = extrude(sketch001, length = -12)
     const chamferColor: [number, number, number] = [168, 168, 168]
     const backgroundColor: [number, number, number] = [30, 30, 30]
     const lowTolerance = 20
-    const highTolerance = 40
+    const highTolerance = 70 // TODO: understand why I needed that for edgeColorYellow on macos (local)
 
     // Setup
     await test.step(`Initial test setup`, async () => {
@@ -2187,6 +2594,57 @@ extrude001 = extrude(sketch001, length = -12)
       )
     })
 
+    // Test 1.1: Edit sweep
+    async function editChamfer(
+      featureTreeIndex: number,
+      oldValue: string,
+      newValue: string
+    ) {
+      await toolbar.openPane('feature-tree')
+      const operationButton = await toolbar.getFeatureTreeOperation(
+        'Chamfer',
+        featureTreeIndex
+      )
+      await operationButton.dblclick({ button: 'left' })
+      await cmdBar.expectState({
+        commandName: 'Chamfer',
+        currentArgKey: 'length',
+        currentArgValue: oldValue,
+        headerArguments: {
+          Length: oldValue,
+        },
+        highlightedHeaderArg: 'length',
+        stage: 'arguments',
+      })
+      await page.keyboard.insertText(newValue)
+      await cmdBar.progressCmdBar()
+      await cmdBar.expectState({
+        stage: 'review',
+        headerArguments: {
+          Length: newValue,
+        },
+        commandName: 'Chamfer',
+      })
+      await cmdBar.progressCmdBar()
+      await toolbar.closePane('feature-tree')
+    }
+
+    await test.step('Edit chamfer via feature tree selection works', async () => {
+      const firstChamferFeatureTreeIndex = 0
+      const editedLength = '1'
+      await editChamfer(firstChamferFeatureTreeIndex, '5', editedLength)
+      await editor.expectEditor.toContain(
+        firstChamferDeclaration.replace(
+          'length = 5',
+          'length = ' + editedLength
+        )
+      )
+
+      // Edit back to original radius
+      await editChamfer(firstChamferFeatureTreeIndex, editedLength, '5')
+      await editor.expectEditor.toContain(firstChamferDeclaration)
+    })
+
     // Test 2: Command bar flow without preselected edges
     await test.step(`Open chamfer UI without selecting edges`, async () => {
       await page.waitForTimeout(100)
@@ -2271,6 +2729,23 @@ extrude001 = extrude(sketch001, length = -12)
       )
     })
 
+    // Test 2.1: Edit chamfer (edgeSweep type)
+    await test.step('Edit chamfer via feature tree selection works', async () => {
+      const secondChamferFeatureTreeIndex = 1
+      const editedLength = '2'
+      await editChamfer(secondChamferFeatureTreeIndex, '5', editedLength)
+      await editor.expectEditor.toContain(
+        secondChamferDeclaration.replace(
+          'length = 5',
+          'length = ' + editedLength
+        )
+      )
+
+      // Edit back to original length
+      await editChamfer(secondChamferFeatureTreeIndex, editedLength, '5')
+      await editor.expectEditor.toContain(secondChamferDeclaration)
+    })
+
     // Test 3: Delete chamfer via feature tree selection
     await test.step('Open Feature Tree Pane', async () => {
       await toolbar.openPane('feature-tree')
@@ -2298,7 +2773,8 @@ extrude001 = extrude(sketch001, length = -12)
     toolbar,
   }) => {
     // Code samples
-    const initialCode = `sketch001 = startSketchOn(XY)
+    const initialCode = `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XY)
   |> startProfileAt([-12, -6], %)
   |> line(end = [0, 12])
   |> line(end = [24, 0], tag = $seg02)
@@ -2452,7 +2928,8 @@ chamfer04 = chamfer(extrude001, length = 5, tags = [getOppositeEdge(seg02)])
       toolbar,
       cmdBar,
     }) => {
-      const initialCode = `sketch001 = startSketchOn(XZ)
+      const initialCode = `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
   |> circle(center = [0, 0], radius = 30)
 extrude001 = extrude(sketch001, length = 30)
     `
@@ -2587,7 +3064,8 @@ extrude001 = extrude(sketch001, length = 30)
     toolbar,
     cmdBar,
   }) => {
-    const initialCode = `sketch001 = startSketchOn(XY)
+    const initialCode = `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XY)
   |> startProfileAt([-20, 20], %)
   |> xLine(length = 40)
   |> yLine(length = -60)
@@ -2705,7 +3183,8 @@ extrude001 = extrude(sketch001, length = 40)
   })
 
   const shellSketchOnFacesCases = [
-    `sketch001 = startSketchOn(XZ)
+    `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
   |> circle(center = [0, 0], radius = 100)
   |> extrude(length = 100)
 
@@ -2713,7 +3192,8 @@ sketch002 = startSketchOn(sketch001, 'END')
   |> circle(center = [0, 0], radius = 50)
   |> extrude(length = 50)
   `,
-    `sketch001 = startSketchOn(XZ)
+    `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
   |> circle(center = [0, 0], radius = 100)
 extrude001 = extrude(sketch001, length = 100)
 
@@ -2996,6 +3476,39 @@ segAng(rectangleSegmentA002),
 
       const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360, axis = 'X')`
       expect(editor.expectEditor.toContain(newCodeToFind)).toBeTruthy()
+
+      // Edit flow
+      const newAngle = '90'
+      await toolbar.openPane('feature-tree')
+      const operationButton = await toolbar.getFeatureTreeOperation(
+        'Revolve',
+        0
+      )
+      await operationButton.dblclick({ button: 'left' })
+      await cmdBar.expectState({
+        commandName: 'Revolve',
+        currentArgKey: 'angle',
+        currentArgValue: '360',
+        headerArguments: {
+          Angle: '360',
+        },
+        highlightedHeaderArg: 'angle',
+        stage: 'arguments',
+      })
+      await page.keyboard.insertText(newAngle)
+      await cmdBar.progressCmdBar()
+      await cmdBar.expectState({
+        stage: 'review',
+        headerArguments: {
+          Angle: newAngle,
+        },
+        commandName: 'Revolve',
+      })
+      await cmdBar.progressCmdBar()
+      await toolbar.closePane('feature-tree')
+      await editor.expectEditor.toContain(
+        newCodeToFind.replace('angle = 360', 'angle = ' + newAngle)
+      )
     })
     test('revolve surface around edge from an extruded solid2d', async ({
       context,
@@ -3006,26 +3519,22 @@ segAng(rectangleSegmentA002),
       toolbar,
       cmdBar,
     }) => {
-      const initialCode = `
-sketch001 = startSketchOn(XZ)
-|> startProfileAt([-102.57, 101.72], %)
-|> angledLine([0, 202.6], %, $rectangleSegmentA001)
-|> angledLine([
-segAng(rectangleSegmentA001) - 90,
-202.6
-], %, $rectangleSegmentB001)
-|> angledLine([
-segAng(rectangleSegmentA001),
--segLen(rectangleSegmentA001)
-], %, $rectangleSegmentC001)
-|> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-|> close()
+      const initialCode = `sketch001 = startSketchOn(XZ)
+  |> startProfileAt([-102.57, 101.72], %)
+  |> angledLine([0, 202.6], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       202.6
+     ], %, $rectangleSegmentB001)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %, $rectangleSegmentC001)
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
 extrude001 = extrude(sketch001, length = 50)
 sketch002 = startSketchOn(extrude001, rectangleSegmentA001)
-|> circle(
-center = [-11.34, 10.0],
-radius = 8.69
-)
+  |> circle(center = [-11.34, 10.0], radius = 8.69)
 `
       await context.addInitScript((initialCode) => {
         localStorage.setItem('persistCode', initialCode)
@@ -3043,9 +3552,49 @@ radius = 8.69
       const lineCodeToSelection = `|> angledLine([0, 202.6], %, $rectangleSegmentA001)`
       await page.getByText(lineCodeToSelection).click()
       await cmdBar.progressCmdBar()
+      await cmdBar.progressCmdBar()
+      await cmdBar.progressCmdBar()
 
-      const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360, axis = getOppositeEdge(rectangleSegmentA001)) `
-      expect(editor.expectEditor.toContain(newCodeToFind)).toBeTruthy()
+      const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360, axis = rectangleSegmentA001)`
+      await editor.expectEditor.toContain(newCodeToFind)
+
+      // Edit flow
+      const newAngle = '180'
+      await toolbar.openPane('feature-tree')
+      const operationButton = await toolbar.getFeatureTreeOperation(
+        'Revolve',
+        0
+      )
+      await operationButton.dblclick({ button: 'left' })
+      await cmdBar.expectState({
+        commandName: 'Revolve',
+        currentArgKey: 'angle',
+        currentArgValue: '360',
+        headerArguments: {
+          Angle: '360',
+        },
+        highlightedHeaderArg: 'angle',
+        stage: 'arguments',
+      })
+      await page.keyboard.insertText(newAngle)
+      await page.getByRole('button', { name: 'Create new variable' }).click()
+      await expect(page.getByPlaceholder('Variable name')).toHaveValue(
+        'angle001'
+      )
+      await cmdBar.progressCmdBar()
+      await cmdBar.expectState({
+        stage: 'review',
+        headerArguments: {
+          Angle: newAngle,
+        },
+        commandName: 'Revolve',
+      })
+      await cmdBar.progressCmdBar()
+      await toolbar.closePane('feature-tree')
+      await editor.expectEditor.toContain('angle001 = ' + newAngle)
+      await editor.expectEditor.toContain(
+        newCodeToFind.replace('angle = 360', 'angle = angle001')
+      )
     })
     test('revolve sketch circle around line segment from startProfileAt sketch', async ({
       context,
@@ -3056,26 +3605,22 @@ radius = 8.69
       toolbar,
       cmdBar,
     }) => {
-      const initialCode = `
-    sketch002 = startSketchOn(XY)
-      |> startProfileAt([-2.02, 1.79], %)
-      |> xLine(length = 2.6)
-    sketch001 = startSketchOn('-XY')
-      |> startProfileAt([-0.48, 1.25], %)
-      |> angledLine([0, 2.38], %, $rectangleSegmentA001)
-      |> angledLine([segAng(rectangleSegmentA001) - 90, 2.4], %, $rectangleSegmentB001)
-      |> angledLine([
-        segAng(rectangleSegmentA001),
-          -segLen(rectangleSegmentA001)
-      ], %, $rectangleSegmentC001)
-      |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-      |> close()
-    extrude001 = extrude(sketch001, length = 5)
-    sketch003 = startSketchOn(extrude001, 'START')
-      |> circle(
-        center = [-0.69, 0.56],
-        radius = 0.28
-      )
+      const initialCode = `sketch002 = startSketchOn(XY)
+  |> startProfileAt([-2.02, 1.79], %)
+  |> xLine(length = 2.6)
+sketch001 = startSketchOn(-XY)
+  |> startProfileAt([-0.48, 1.25], %)
+  |> angledLine([0, 2.38], %, $rectangleSegmentA001)
+  |> angledLine([segAng(rectangleSegmentA001) - 90, 2.4], %, $rectangleSegmentB001)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %, $rectangleSegmentC001)
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
+extrude001 = extrude(sketch001, length = 5)
+sketch003 = startSketchOn(extrude001, 'START')
+  |> circle(center = [-0.69, 0.56], radius = 0.28)
 `
 
       await context.addInitScript((initialCode) => {
@@ -3094,9 +3639,44 @@ radius = 8.69
       const lineCodeToSelection = `|> xLine(length = 2.6)`
       await page.getByText(lineCodeToSelection).click()
       await cmdBar.progressCmdBar()
+      await cmdBar.progressCmdBar()
+      await cmdBar.progressCmdBar()
 
       const newCodeToFind = `revolve001 = revolve(sketch003, angle = 360, axis = seg01)`
       expect(editor.expectEditor.toContain(newCodeToFind)).toBeTruthy()
+
+      // Edit flow
+      const newAngle = '270'
+      await toolbar.openPane('feature-tree')
+      const operationButton = await toolbar.getFeatureTreeOperation(
+        'Revolve',
+        0
+      )
+      await operationButton.dblclick({ button: 'left' })
+      await cmdBar.expectState({
+        commandName: 'Revolve',
+        currentArgKey: 'angle',
+        currentArgValue: '360',
+        headerArguments: {
+          Angle: '360',
+        },
+        highlightedHeaderArg: 'angle',
+        stage: 'arguments',
+      })
+      await page.keyboard.insertText(newAngle)
+      await cmdBar.progressCmdBar()
+      await cmdBar.expectState({
+        stage: 'review',
+        headerArguments: {
+          Angle: newAngle,
+        },
+        commandName: 'Revolve',
+      })
+      await cmdBar.progressCmdBar()
+      await toolbar.closePane('feature-tree')
+      await editor.expectEditor.toContain(
+        newCodeToFind.replace('angle = 360', 'angle = ' + newAngle)
+      )
     })
   })
 
@@ -3109,7 +3689,8 @@ radius = 8.69
     toolbar,
     cmdBar,
   }) => {
-    const initialCode = `sketch001 = startSketchOn(XZ)
+    const initialCode = `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 profile001 = circle(
   sketch001,
   center = [0, 0],

e2e/playwright/projects.spec.ts

@@ -8,6 +8,7 @@ import {
   createProject,
   getPlaywrightDownloadDir,
   orRunWhenFullSuiteEnabled,
+  runningOnWindows,
 } from './test-utils'
 import fsp from 'fs/promises'
 import fs from 'fs'
@@ -86,7 +87,7 @@ test(
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+        executorInputPath('cylinder-inches.kcl'),
         path.join(bracketDir, 'main.kcl')
       )
     })
@@ -123,7 +124,7 @@ test(
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+        executorInputPath('cylinder-inches.kcl'),
         path.join(bracketDir, 'main.kcl')
       )
       const errorDir = path.join(dir, 'broken-code')
@@ -161,7 +162,7 @@ test(
       // gray at this pixel means the stream has loaded in the most
       // user way we can verify it (pixel color)
       await expect
-        .poll(() => u.getGreatestPixDiff(pointOnModel, [85, 85, 85]), {
+        .poll(() => u.getGreatestPixDiff(pointOnModel, [110, 110, 110]), {
           timeout: 10_000,
         })
         .toBeLessThan(20)
@@ -191,7 +192,7 @@ test(
 
       // error text on hover
       await page.hover('.cm-lint-marker-error')
-      const crypticErrorText = `Expected a tag declarator`
+      const crypticErrorText = `The arg tag was given, but it was the wrong type`
       await expect(page.getByText(crypticErrorText).first()).toBeVisible()
 
       // black pixel means the scene has been cleared.
@@ -212,7 +213,7 @@ test(
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+        executorInputPath('cylinder-inches.kcl'),
         path.join(bracketDir, 'main.kcl')
       )
       const emptyDir = path.join(dir, 'empty')
@@ -247,7 +248,7 @@ test(
       // gray at this pixel means the stream has loaded in the most
       // user way we can verify it (pixel color)
       await expect
-        .poll(() => u.getGreatestPixDiff(pointOnModel, [85, 85, 85]), {
+        .poll(() => u.getGreatestPixDiff(pointOnModel, [125, 125, 125]), {
           timeout: 10_000,
         })
         .toBeLessThan(15)
@@ -289,7 +290,7 @@ test(
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+        executorInputPath('cylinder-inches.kcl'),
         path.join(bracketDir, 'main.kcl')
       )
 
@@ -318,7 +319,7 @@ test(
       // gray at this pixel means the stream has loaded in the most
       // user way we can verify it (pixel color)
       await expect
-        .poll(() => u.getGreatestPixDiff(pointOnModel, [85, 85, 85]), {
+        .poll(() => u.getGreatestPixDiff(pointOnModel, [125, 125, 125]), {
           timeout: 10_000,
         })
         .toBeLessThan(15)
@@ -351,11 +352,14 @@ test(
   'open a file in a project works and renders, open another file in the same project with errors, it should clear the scene',
   { tag: '@electron' },
   async ({ context, page }, testInfo) => {
+    if (runningOnWindows()) {
+      test.fixme(orRunWhenFullSuiteEnabled())
+    }
     await context.folderSetupFn(async (dir) => {
       const bracketDir = path.join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+        executorInputPath('cylinder-inches.kcl'),
         path.join(bracketDir, 'main.kcl')
       )
       await fsp.copyFile(
@@ -389,7 +393,7 @@ test(
       // gray at this pixel means the stream has loaded in the most
       // user way we can verify it (pixel color)
       await expect
-        .poll(() => u.getGreatestPixDiff(pointOnModel, [85, 85, 85]), {
+        .poll(() => u.getGreatestPixDiff(pointOnModel, [125, 125, 125]), {
           timeout: 10_000,
         })
         .toBeLessThan(15)
@@ -409,7 +413,7 @@ test(
 
       // error text on hover
       await page.hover('.cm-lint-marker-error')
-      const crypticErrorText = `Expected a tag declarator`
+      const crypticErrorText = `The arg tag was given, but it was the wrong type`
       await expect(page.getByText(crypticErrorText).first()).toBeVisible()
 
       // black pixel means the scene has been cleared.
@@ -439,7 +443,6 @@ test(
     await page.getByText('broken-code').click()
 
     // Gotcha: You can not use scene.waitForExecutionDone() since the KCL code is going to fail
-    await expect(page.getByTestId('loading')).toBeAttached()
     await expect(page.getByTestId('loading')).not.toBeAttached({
       timeout: 20_000,
     })
@@ -453,7 +456,7 @@ test(
 
     // error text on hover
     await page.hover('.cm-lint-marker-error')
-    const crypticErrorText = `Expected a tag declarator`
+    const crypticErrorText = `The arg tag was given, but it was the wrong type`
     await expect(page.getByText(crypticErrorText).first()).toBeVisible()
   }
 )
@@ -469,12 +472,15 @@ test.describe('Can export from electron app', () => {
         if (!tronApp) {
           fail()
         }
+        if (runningOnWindows()) {
+          test.fixme(orRunWhenFullSuiteEnabled())
+        }
 
         await context.folderSetupFn(async (dir) => {
           const bracketDir = path.join(dir, 'bracket')
           await fsp.mkdir(bracketDir, { recursive: true })
           await fsp.copyFile(
-            executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+            executorInputPath('cylinder-inches.kcl'),
             path.join(bracketDir, 'main.kcl')
           )
         })
@@ -506,7 +512,7 @@ test.describe('Can export from electron app', () => {
           // gray at this pixel means the stream has loaded in the most
           // user way we can verify it (pixel color)
           await expect
-            .poll(() => u.getGreatestPixDiff(pointOnModel, [85, 85, 85]), {
+            .poll(() => u.getGreatestPixDiff(pointOnModel, [125, 125, 125]), {
               timeout: 10_000,
             })
             .toBeLessThan(15)
@@ -547,7 +553,7 @@ test.describe('Can export from electron app', () => {
               },
               { timeout: 15_000 }
             )
-            .toBeGreaterThan(300_000)
+            .toBeGreaterThan(50_000)
 
           // clean up exported file
           await fsp.rm(filepath)
@@ -1328,6 +1334,9 @@ test(
   'Can load a file with CRLF line endings',
   { tag: '@electron' },
   async ({ context, page }, testInfo) => {
+    if (runningOnWindows()) {
+      test.fixme(orRunWhenFullSuiteEnabled())
+    }
     await context.folderSetupFn(async (dir) => {
       const routerTemplateDir = path.join(dir, 'router-template-slate')
       await fsp.mkdir(routerTemplateDir, { recursive: true })
@@ -1497,7 +1506,12 @@ test(
 
     await u.waitForPageLoad()
 
-    await page.locator('.cm-content').fill(`sketch001 = startSketchOn(XZ)
+    // The file should be prepopulated with the user's unit settings.
+    await expect(page.locator('.cm-content')).toHaveText(
+      '@settings(defaultLengthUnit = in)'
+    )
+
+    await page.locator('.cm-content').fill(`sketch001 = startSketchOn('XZ')
   |> startProfileAt([-87.4, 282.92], %)
   |> line(end = [324.07, 27.199], tag = $seg01)
   |> line(end = [118.328, -291.754])

e2e/playwright/regression-tests.spec.ts

@@ -4,9 +4,9 @@ import path from 'path'
 import * as fsp from 'fs/promises'
 import {
   getUtils,
-  executorInputPath,
   TEST_COLORS,
   TestColor,
+  executorInputPath,
   orRunWhenFullSuiteEnabled,
 } from './test-utils'
 import { TEST_CODE_TRIGGER_ENGINE_EXPORT_ERROR } from './storageStates'
@@ -331,7 +331,7 @@ extrude001 = extrude(sketch001, length = 50)
           localStorage.setItem(
             'persistCode',
             `@settings(defaultLengthUnit = mm)
-sketch002 = startSketchOn('XY')
+sketch002 = startSketchOn(XY)
 profile002 = startProfileAt([72.24, -52.05], sketch002)
   |> angledLine([0, 181.26], %, $rectangleSegmentA001)
   |> angledLine([
@@ -582,7 +582,7 @@ extrude002 = extrude(profile002, length = 150)
         const bracketDir = path.join(dir, 'bracket')
         await fsp.mkdir(bracketDir, { recursive: true })
         await fsp.copyFile(
-          executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+          executorInputPath('cylinder-inches.kcl'),
           path.join(bracketDir, 'main.kcl')
         )
       })
@@ -619,6 +619,7 @@ extrude002 = extrude(profile002, length = 150)
   test(`View gizmo stays visible even when zoomed out all the way`, async ({
     page,
     homePage,
+    scene,
   }) => {
     const u = await getUtils(page)
 
@@ -632,7 +633,7 @@ extrude002 = extrude(profile002, length = 150)
 
     await test.step(`Load an empty file`, async () => {
       await page.addInitScript(async () => {
-        localStorage.setItem('persistCode', '')
+        localStorage.setItem('persistCode', '@settings(defaultLengthUnit = in)')
       })
       await page.setBodyDimensions({ width: 1200, height: 500 })
       await homePage.goToModelingScene()
@@ -646,22 +647,31 @@ extrude002 = extrude(profile002, length = 150)
           timeout: 5000,
           message: 'Plane color is visible',
         })
-        .toBeLessThanOrEqual(15)
+        .toBeLessThanOrEqual(20)
+      await expect(scene.startEditSketchBtn).toBeEnabled()
 
       let maxZoomOuts = 10
       let middlePixelIsBackgroundColor =
         (await middlePixelIsColor(bgColor)) < 10
+
+      console.time('pressing control')
+      await page.keyboard.down('Control')
+
       while (!middlePixelIsBackgroundColor && maxZoomOuts > 0) {
-        await page.keyboard.down('Control')
-        await page.mouse.move(600, 460)
-        await page.mouse.down({ button: 'right' })
-        await page.mouse.move(600, 50, { steps: 20 })
-        await page.mouse.up({ button: 'right' })
-        await page.keyboard.up('Control')
         await page.waitForTimeout(100)
+        await page.mouse.move(650, 460)
+        console.time('moved to start point')
+        await page.mouse.down({ button: 'right' })
+        console.time('moused down')
+        await page.mouse.move(650, 50, { steps: 20 })
+        console.time('moved to end point')
+        await page.waitForTimeout(100)
+        await page.mouse.up({ button: 'right' })
+        console.time('moused up')
         maxZoomOuts--
-        middlePixelIsBackgroundColor = (await middlePixelIsColor(bgColor)) < 10
+        middlePixelIsBackgroundColor = (await middlePixelIsColor(bgColor)) < 15
       }
+      await page.keyboard.up('Control')
 
       expect(middlePixelIsBackgroundColor, {
         message: 'We should not see the default planes',
@@ -678,13 +688,12 @@ extrude002 = extrude(profile002, length = 150)
     homePage,
     scene,
     toolbar,
-    viewport,
   }) => {
     await context.folderSetupFn(async (dir) => {
       const legoDir = path.join(dir, 'lego')
       await fsp.mkdir(legoDir, { recursive: true })
       await fsp.copyFile(
-        executorInputPath('lego.kcl'),
+        executorInputPath('e2e-can-sketch-on-chamfer.kcl'),
         path.join(legoDir, 'main.kcl')
       )
     })
@@ -697,11 +706,8 @@ extrude002 = extrude(profile002, length = 150)
       await scene.loadingIndicator.waitFor({ state: 'detached' })
     })
     await test.step(`The part should start loading quickly, not waiting until execution is complete`, async () => {
-      await scene.expectPixelColor(
-        [143, 143, 143],
-        { x: (viewport?.width ?? 1200) / 2, y: (viewport?.height ?? 500) / 2 },
-        15
-      )
+      // TODO: use the viewport size to pick the center point, but the `viewport` fixture's values were wrong.
+      await scene.expectPixelColor([116, 116, 116], { x: 500, y: 250 }, 15)
     })
   })
 
@@ -778,6 +784,19 @@ plane002 = offsetPlane(XZ, offset = -2 * x)`
       await editor.expectEditor.not.toContain(`plane002`)
     })
   })
+
+  test.fail(
+    'Console errors cause tests to fail',
+    async ({ page, homePage }) => {
+      const u = await getUtils(page)
+      await homePage.goToModelingScene()
+      await u.openAndClearDebugPanel()
+
+      await page.getByTestId('custom-cmd-input').fill('foobar')
+      await page.getByTestId('custom-cmd-send-button').scrollIntoViewIfNeeded()
+      await page.getByTestId('custom-cmd-send-button').click()
+    }
+  )
 })
 
 async function clickExportButton(page: Page) {

e2e/playwright/sketch-tests.spec.ts

@@ -113,7 +113,8 @@ test.describe('Sketch tests', { tag: ['@skipWin'] }, () => {
     await page.addInitScript(async () => {
       localStorage.setItem(
         'persistCode',
-        `sketch001 = startSketchOn(XZ)
+        `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([2.61, -4.01], %)
   |> xLine(length = 8.73)
   |> tangentialArcTo([8.33, -1.31], %)`
@@ -159,7 +160,10 @@ test.describe('Sketch tests', { tag: ['@skipWin'] }, () => {
       await page.mouse.click(700, 200)
 
       await expect.poll(u.normalisedEditorCode, { timeout: 1000 })
-        .toBe(`sketch002 = startSketchOn(XZ)
+        .toBe(`@settings(defaultLengthUnit = in)
+
+
+sketch002 = startSketchOn(XZ)
 sketch001 = startProfileAt([12.34, -12.34], sketch002)
   |> yLine(length = 12.34)
 
@@ -789,7 +793,8 @@ sketch001 = startProfileAt([12.34, -12.34], sketch002)
       200
     )
 
-    let codeStr = 'sketch001 = startSketchOn(XY)'
+    let codeStr =
+      '@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XY)'
 
     await page.mouse.click(center.x, viewportSize.height * 0.55)
     await expect(u.codeLocator).toHaveText(codeStr)
@@ -868,7 +873,8 @@ sketch001 = startProfileAt([12.34, -12.34], sketch002)
 
       await u.openDebugPanel()
 
-      const code = `sketch001 = startSketchOn(-XZ)
+      const code = `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(-XZ)
 profile001 = startProfileAt([${roundOff(scale * 69.6)}, ${roundOff(
         scale * 34.8
       )}], sketch001)
@@ -898,7 +904,7 @@ profile001 = startProfileAt([${roundOff(scale * 69.6)}, ${roundOff(
       await page.mouse.move(700, 200, { steps: 10 })
       await page.mouse.click(700, 200, { delay: 200 })
       await expect(page.locator('.cm-content')).toHaveText(
-        `sketch001 = startSketchOn(-XZ)`
+        `@settings(defaultLengthUnit = in)sketch001 = startSketchOn(-XZ)`
       )
 
       let prevContent = await page.locator('.cm-content').innerText()
@@ -1426,7 +1432,8 @@ test.describe(`Sketching with offset planes`, () => {
     await context.addInitScript(() => {
       localStorage.setItem(
         'persistCode',
-        `offsetPlane001 = offsetPlane(XY, offset = 10)`
+        `@settings(defaultLengthUnit = in)
+offsetPlane001 = offsetPlane(XY, offset = 10)`
       )
     })
 
@@ -1440,7 +1447,7 @@ test.describe(`Sketching with offset planes`, () => {
       await test.step(`Hovering should highlight code`, async () => {
         await planeHover()
         await editor.expectState({
-          activeLines: [`offsetPlane001=offsetPlane(XY,offset=10)`],
+          activeLines: [`@settings(defaultLengthUnit = in)`],
           diagnostics: [],
           highlightedCode: 'offsetPlane(XY, offset = 10)',
         })
@@ -1453,7 +1460,7 @@ test.describe(`Sketching with offset planes`, () => {
         await expect(toolbar.lineBtn).toBeEnabled()
         await editor.expectEditor.toContain('startSketchOn(offsetPlane001)')
         await editor.expectState({
-          activeLines: [`offsetPlane001=offsetPlane(XY,offset=10)`],
+          activeLines: [`@settings(defaultLengthUnit = in)`],
           diagnostics: [],
           highlightedCode: '',
         })
@@ -1604,7 +1611,8 @@ profile002 = startProfileAt([117.2, 56.08], sketch001)
       await context.addInitScript(() => {
         localStorage.setItem(
           'persistCode',
-          `sketch001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 profile002 = startProfileAt([40.68, 87.67], sketch001)
   |> xLine(length = 239.17)
 profile003 = startProfileAt([206.63, -56.73], sketch001)
@@ -2172,7 +2180,8 @@ profile003 = startProfileAt([206.63, -56.73], sketch001)
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `sketch001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([6.24, 4.54], sketch001)
   |> line(end = [-0.41, 6.99])
   |> line(end = [8.61, 0.74])
@@ -2317,7 +2326,8 @@ profile004 = circleThreePoint(sketch001, p1 = [13.44, -6.8], p2 = [13.39, -2.07]
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `sketch001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([6.24, 4.54], sketch001)
   |> line(end = [-0.41, 6.99])
   |> line(end = [8.61, 0.74])
@@ -2422,7 +2432,8 @@ profile003 = circle(sketch001, center = [6.92, -4.2], radius = 3.16)
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `sketch001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([-63.43, 193.08], sketch001)
   |> line(end = [168.52, 149.87])
   |> line(end = [190.29, -39.18])
@@ -2486,7 +2497,11 @@ extrude001 = extrude(profile003, length = 5)
     page,
   }) => {
     await page.addInitScript(async () => {
-      localStorage.setItem('persistCode', `myVar = 5`)
+      localStorage.setItem(
+        'persistCode',
+        `@settings(defaultLengthUnit = in)
+        myVar = 5`
+      )
     })
 
     await page.setBodyDimensions({ width: 1000, height: 500 })
@@ -2533,7 +2548,8 @@ extrude001 = extrude(profile003, length = 5)
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `sketch001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([85.19, 338.59], sketch001)
   |> line(end = [213.3, -94.52])
   |> line(end = [-230.09, -55.34])
@@ -2575,7 +2591,8 @@ profile002 = startProfileAt([85.81, 52.55], sketch002)
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `thePart = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+thePart = startSketchOn(XZ)
   |> startProfileAt([7.53, 10.51], %)
   |> line(end = [12.54, 1.83])
   |> line(end = [6.65, -6.91])
@@ -2636,7 +2653,8 @@ extrude001 = extrude(thePart, length = 75)
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `sketch001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([6.71, -3.66], sketch001)
   |> line(end = [2.65, 9.02], tag = $seg02)
   |> line(end = [3.73, -9.36], tag = $seg01)
@@ -2809,7 +2827,8 @@ extrude003 = extrude(profile011, length = 2.5)
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `sketch001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([34, 42.66], sketch001)
   |> line(end = [102.65, 151.99])
   |> line(end = [76, -138.66])

e2e/playwright/snapshot-tests.spec.ts

@@ -76,11 +76,11 @@ part001 = startSketchOn(-XZ)
   |> xLine(endAbsolute = totalLen, tag = $seg03)
   |> yLine(length = -armThick, tag = $seg01)
   |> angledLineThatIntersects({
-        angle = HALF_TURN,
+        angle = turns::HALF_TURN,
         offset = -armThick,
         intersectTag = seg04
       }, %)
-  |> angledLineToY([segAng(seg04, %) + 180, ZERO], %)
+  |> angledLineToY([segAng(seg04, %) + 180, turns::ZERO], %)
   |> angledLineToY({
         angle = -bottomAng,
         to = -totalHeightHalf - armThick,
@@ -88,12 +88,12 @@ part001 = startSketchOn(-XZ)
   |> xLine(length = endAbsolute = segEndX(seg03) + 0)
   |> yLine(length = -segLen(seg01, %))
   |> angledLineThatIntersects({
-        angle = HALF_TURN,
+        angle = turns::HALF_TURN,
         offset = -armThick,
         intersectTag = seg02
       }, %)
   |> angledLineToY([segAng(seg02, %) + 180, -baseHeight], %)
-  |> xLine(endAbsolute = ZERO)
+  |> xLine(endAbsolute = turns::ZERO)
   |> close()
   |> extrude(length = 4)`
       )

e2e/playwright/snapshots/prompt-to-edit/prompt-to-edit-snapshot-tests-spec-ts--change-colour.snap.json

@@ -1,5 +1,5 @@
 {
-  "original_source_code": "sketch001 = startSketchOn('XZ')\nprofile001 = startProfileAt([57.81, 250.51], sketch001)\n  |> line(end = [121.13, 56.63], tag = $seg02)\n  |> line(end = [83.37, -34.61], tag = $seg01)\n  |> line(end = [19.66, -116.4])\n  |> line(end = [-221.8, -41.69])\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude001 = extrude(profile001, length = 200)\nsketch002 = startSketchOn('XZ')\n  |> startProfileAt([-73.64, -42.89], %)\n  |> xLine(length = 173.71)\n  |> line(end = [-22.12, -94.4])\n  |> xLine(length = -156.98)\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude002 = extrude(sketch002, length = 50)\nsketch003 = startSketchOn('XY')\n  |> startProfileAt([52.92, 157.81], %)\n  |> angledLine([0, 176.4], %, $rectangleSegmentA001)\n  |> angledLine([\n       segAng(rectangleSegmentA001) - 90,\n       53.4\n     ], %, $rectangleSegmentB001)\n  |> angledLine([\n       segAng(rectangleSegmentA001),\n       -segLen(rectangleSegmentA001)\n     ], %, $rectangleSegmentC001)\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude003 = extrude(sketch003, length = 20)\n",
+  "original_source_code": "sketch001 = startSketchOn('XZ')\nprofile001 = startProfileAt([57.81, 250.51], sketch001)\n  |> line(end = [121.13, 56.63], tag = $seg02)\n  |> line(end = [83.37, -34.61], tag = $seg01)\n  |> line(end = [19.66, -116.4])\n  |> line(end = [-221.8, -41.69])\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude001 = extrude(profile001, length = 200)\nsketch002 = startSketchOn('XZ')\n  |> startProfileAt([-73.64, -42.89], %)\n  |> xLine(length = 173.71)\n  |> line(end = [-22.12, -94.4])\n  |> xLine(length = -156.98)\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude002 = extrude(sketch002, length = 50)\nsketch003 = startSketchOn(XY)\n  |> startProfileAt([52.92, 157.81], %)\n  |> angledLine([0, 176.4], %, $rectangleSegmentA001)\n  |> angledLine([\n       segAng(rectangleSegmentA001) - 90,\n       53.4\n     ], %, $rectangleSegmentB001)\n  |> angledLine([\n       segAng(rectangleSegmentA001),\n       -segLen(rectangleSegmentA001)\n     ], %, $rectangleSegmentC001)\n  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])\n  |> close()\nextrude003 = extrude(sketch003, length = 20)\n",
   "prompt": "make this neon green please, use #39FF14",
   "source_ranges": [
     {

e2e/playwright/snapshots/prompt-to-edit/prompt-to-edit-snapshot-tests-spec-ts--edit-with-ai-example-snapshots--change-colour.snap.json

@@ -29,5 +29,5 @@
       }
     }
   ],
-  "kcl_version": "0.2.52"
+  "kcl_version": "0.2.54"
 }

e2e/playwright/test-utils.test.ts

@@ -0,0 +1,99 @@
+import {
+  runningOnLinux,
+  runningOnMac,
+  runningOnWindows,
+  orRunWhenFullSuiteEnabled,
+} from './test-utils'
+
+describe('platform detection utilities', () => {
+  const originalPlatform = process.platform
+
+  afterAll(() => {
+    Object.defineProperty(process, 'platform', {
+      value: originalPlatform,
+    })
+  })
+
+  describe('runningOnLinux', () => {
+    it('returns true on Linux', () => {
+      Object.defineProperty(process, 'platform', {
+        value: 'linux',
+      })
+      expect(runningOnLinux()).toBe(true)
+    })
+
+    it('returns false on other platforms', () => {
+      Object.defineProperty(process, 'platform', {
+        value: 'darwin',
+      })
+      expect(runningOnLinux()).toBe(false)
+    })
+  })
+
+  describe('runningOnMac', () => {
+    it('returns true on Mac', () => {
+      Object.defineProperty(process, 'platform', {
+        value: 'darwin',
+      })
+      expect(runningOnMac()).toBe(true)
+    })
+
+    it('returns false on other platforms', () => {
+      Object.defineProperty(process, 'platform', {
+        value: 'linux',
+      })
+      expect(runningOnMac()).toBe(false)
+    })
+  })
+
+  describe('runningOnWindows', () => {
+    it('returns true on Windows', () => {
+      Object.defineProperty(process, 'platform', {
+        value: 'win32',
+      })
+      expect(runningOnWindows()).toBe(true)
+    })
+
+    it('returns false on other platforms', () => {
+      Object.defineProperty(process, 'platform', {
+        value: 'linux',
+      })
+      expect(runningOnWindows()).toBe(false)
+    })
+  })
+})
+
+describe('utility to bypass unreliable tests', () => {
+  const originalEnv = { ...process.env }
+
+  afterAll(() => {
+    process.env = { ...originalEnv }
+  })
+
+  it('always runs them on dedicated branch', () => {
+    process.env.GITHUB_EVENT_NAME = 'push'
+    process.env.GITHUB_REF = 'refs/heads/all-e2e'
+    process.env.GITHUB_HEAD_REF = ''
+    process.env.GITHUB_BASE_REF = ''
+    const shouldSkip = orRunWhenFullSuiteEnabled()
+    expect(shouldSkip).toBe(false)
+  })
+
+  it('skips them on the main branch', () => {
+    process.env.GITHUB_EVENT_NAME = 'push'
+    process.env.GITHUB_REF = 'refs/heads/main'
+    process.env.GITHUB_HEAD_REF = ''
+    process.env.GITHUB_BASE_REF = ''
+    const shouldSkip = orRunWhenFullSuiteEnabled()
+    expect(shouldSkip).toBe(true)
+  })
+
+  it('skips them on pull requests', () => {
+    process.env.GITHUB_EVENT_NAME = 'pull_request'
+    process.env.GITHUB_REF = 'refs/pull/5883/merge'
+    process.env.GITHUB_HEAD_REF = 'my-branch'
+    process.env.GITHUB_BASE_REF = 'main'
+    const shouldSkip = orRunWhenFullSuiteEnabled()
+    expect(shouldSkip).toBe(true)
+  })
+})

e2e/playwright/test-utils.ts

@@ -26,6 +26,7 @@ import { isArray } from 'lib/utils'
 import { reportRejection } from 'lib/trap'
 import { DeepPartial } from 'lib/types'
 import { Configuration } from 'lang/wasm'
+import { ProjectConfiguration } from '@rust/kcl-lib/bindings/ProjectConfiguration'
 
 const toNormalizedCode = (text: string) => {
   return text.replace(/\s+/g, '')
@@ -55,8 +56,21 @@ export const commonPoints = {
 export const editorSelector = '[role="textbox"][data-language="kcl"]'
 type PaneId = 'variables' | 'code' | 'files' | 'logs'
 
+export function runningOnLinux() {
+  return process.platform === 'linux'
+}
+
+export function runningOnMac() {
+  return process.platform === 'darwin'
+}
+
+export function runningOnWindows() {
+  return process.platform === 'win32'
+}
+
 export function orRunWhenFullSuiteEnabled() {
-  return process.env.GITHUB_REF !== 'all-e2e'
+  const branch = process.env.GITHUB_REF?.replace('refs/heads/', '')
+  return branch !== 'all-e2e'
 }
 
 async function waitForPageLoadWithRetry(page: Page) {
@@ -748,7 +762,7 @@ export interface Paths {
 }
 
 export const doExport = async (
-  output: Models['OutputFormat_type'],
+  output: Models['OutputFormat3d_type'],
   rootDir: string,
   page: Page,
   exportFrom: 'dropdown' | 'sidebarButton' | 'commandBar' = 'dropdown'
@@ -921,47 +935,39 @@ export async function setup(
 }
 
 function failOnConsoleErrors(page: Page, testInfo?: TestInfo) {
-  // enabled for chrome for now
-  if (page.context().browser()?.browserType().name() === 'chromium') {
-    // No idea wtf exception is
-    page.on('pageerror', (exception: any) => {
-      if (isErrorWhitelisted(exception)) {
-        return
-      }
+  page.on('pageerror', (exception: any) => {
+    if (isErrorWhitelisted(exception)) {
+      return
+    }
+    // Only disable this environment variable if you want to collect console errors
+    if (process.env.FAIL_ON_CONSOLE_ERRORS !== 'false') {
+      // Use expect to prevent page from closing and not cleaning up
+      expect(`An error was detected in the console: \r\n message:${exception.message} \r\n name:${exception.name} \r\n stack:${exception.stack}
 
-      // only set this env var to false if you want to collect console errors
-      // This can be configured in the GH workflow.  This should be set to true by default (we want tests to fail when
-      // unwhitelisted console errors are detected).
-      if (process.env.FAIL_ON_CONSOLE_ERRORS === 'true') {
-        // Fail when running on CI and FAIL_ON_CONSOLE_ERRORS is set
-        // use expect to prevent page from closing and not cleaning up
-        expect(`An error was detected in the console: \r\n message:${exception.message} \r\n name:${exception.name} \r\n stack:${exception.stack}
-
-          *Either fix the console error or add it to the whitelist defined in ./lib/console-error-whitelist.ts (if the error can be safely ignored)
-          `).toEqual('Console error detected')
-      } else {
-        // the (test-results/exceptions.txt) file will be uploaded as part of an upload artifact in GH
-        fsp
-          .appendFile(
-            './test-results/exceptions.txt',
-            [
-              '~~~',
-              `triggered_by_test:${
-                testInfo?.file + ' ' + (testInfo?.title || ' ')
-              }`,
-              `name:${exception.name}`,
-              `message:${exception.message}`,
-              `stack:${exception.stack}`,
-              `project:${testInfo?.project.name}`,
-              '~~~',
-            ].join('\n')
-          )
-          .catch((err) => {
-            console.error(err)
-          })
-      }
-    })
-  }
+        *Either fix the console error or add it to the whitelist defined in ./lib/console-error-whitelist.ts (if the error can be safely ignored)
+        `).toEqual('Console error detected')
+    } else {
+      // Add errors to `test-results/exceptions.txt` as a test artifact
+      fsp
+        .appendFile(
+          './test-results/exceptions.txt',
+          [
+            '~~~',
+            `triggered_by_test:${
+              testInfo?.file + ' ' + (testInfo?.title || ' ')
+            }`,
+            `name:${exception.name}`,
+            `message:${exception.message}`,
+            `stack:${exception.stack}`,
+            `project:${testInfo?.project.name}`,
+            '~~~',
+          ].join('\n')
+        )
+        .catch((err) => {
+          console.error(err)
+        })
+    }
+  })
 }
 export async function isOutOfViewInScrollContainer(
   element: Locator,
@@ -1112,3 +1118,15 @@ export function settingsToToml(settings: DeepPartial<Configuration>) {
 export function tomlToSettings(toml: string): DeepPartial<Configuration> {
   return TOML.parse(toml)
 }
+
+export function tomlToPerProjectSettings(
+  toml: string
+): DeepPartial<ProjectConfiguration> {
+  return TOML.parse(toml)
+}
+
+export function perProjectsettingsToToml(
+  settings: DeepPartial<ProjectConfiguration>
+) {
+  return TOML.stringify(settings as any)
+}

e2e/playwright/testing-constraints.spec.ts

@@ -4,7 +4,6 @@ import {
   getUtils,
   TEST_COLORS,
   pollEditorLinesSelectedLength,
-  executorInputPath,
   orRunWhenFullSuiteEnabled,
 } from './test-utils'
 import { XOR } from 'lib/utils'
@@ -81,7 +80,8 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
     await page.addInitScript(async () => {
       localStorage.setItem(
         'persistCode',
-        `yo = 79
+        `@settings(defaultLengthUnit = in)
+  yo = 79
   part001 = startSketchOn(XZ)
     |> startProfileAt([-7.54, -26.74], %)
     |> line(end = [74.36, 130.4], tag = $seg01)
@@ -145,7 +145,8 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
         await page.addInitScript(async () => {
           localStorage.setItem(
             'persistCode',
-            `yo = 5
+            `@settings(defaultLengthUnit = in)
+      yo = 5
       part001 = startSketchOn(XZ)
         |> startProfileAt([-7.54, -26.74], %)
         |> line(end = [74.36, 130.4], tag = $seg01)
@@ -159,31 +160,6 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
         |> xLine(length = segLen(seg_what))
         |> line(endAbsolute = [profileStartX(%), profileStartY(%)])`
           )
-
-          const isChecked = await createNewVariableCheckbox.isChecked()
-          const addVariable = testName === 'Add variable'
-          XOR(isChecked, addVariable) && // XOR because no need to click the checkbox if the state is already correct
-            (await createNewVariableCheckbox.click())
-
-          await page
-            .getByRole('button', { name: 'Add constraining value' })
-            .click()
-
-          // Wait for the codemod to take effect
-          await expect(page.locator('.cm-content')).toContainText(`angle: -57,`)
-          await expect(page.locator('.cm-content')).toContainText(
-            `offset: ${offset},`
-          )
-
-          await pollEditorLinesSelectedLength(page, 2)
-          const activeLinesContent = await page.locator('.cm-activeLine').all()
-          await expect(activeLinesContent[0]).toHaveText(
-            `|> line(end = [74.36, 130.4], tag = $seg01)`
-          )
-          await expect(activeLinesContent[1]).toHaveText(`}, %)`)
-
-          // checking the count of the overlays is a good proxy check that the client sketch scene is in a good state
-          await expect(page.getByTestId('segment-overlay')).toHaveCount(4)
         })
         const u = await getUtils(page)
         await page.setBodyDimensions({ width: 1200, height: 500 })
@@ -277,7 +253,8 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
         await page.addInitScript(async () => {
           localStorage.setItem(
             'persistCode',
-            `yo = 5
+            `@settings(defaultLengthUnit = in)
+      yo = 5
       part001 = startSketchOn(XZ)
         |> startProfileAt([-7.54, -26.74], %)
         |> line(end = [74.36, 130.4])
@@ -387,7 +364,8 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
         await page.addInitScript(async () => {
           localStorage.setItem(
             'persistCode',
-            `yo = 5
+            `@settings(defaultLengthUnit = in)
+      yo = 5
       part001 = startSketchOn(XZ)
         |> startProfileAt([-7.54, -26.74], %)
         |> line(end = [74.36, 130.4])
@@ -486,13 +464,13 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
         testName: 'Add variable, selecting axis',
         addVariable: true,
         axisSelect: true,
-        value: 'QUARTER_TURN - angle001',
+        value: 'turns::QUARTER_TURN - angle001',
       },
       {
         testName: 'No variable, selecting axis',
         addVariable: false,
         axisSelect: true,
-        value: 'QUARTER_TURN - 7',
+        value: 'turns::QUARTER_TURN - 7',
       },
     ] as const
     for (const { testName, addVariable, value, axisSelect } of cases) {
@@ -500,7 +478,8 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
         await page.addInitScript(async () => {
           localStorage.setItem(
             'persistCode',
-            `yo = 5
+            `@settings(defaultLengthUnit = in)
+      yo = 5
       part001 = startSketchOn(XZ)
         |> startProfileAt([-7.54, -26.74], %)
         |> line(end = [74.36, 130.4])
@@ -602,7 +581,8 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
         await page.addInitScript(async () => {
           localStorage.setItem(
             'persistCode',
-            `yo = 5
+            `@settings(defaultLengthUnit = in)
+      yo = 5
       part001 = startSketchOn(XZ)
         |> startProfileAt([-7.54, -26.74], %)
         |> line(end = [74.36, 130.4])
@@ -688,7 +668,8 @@ test.describe('Testing constraints', { tag: ['@skipWin'] }, () => {
         await page.addInitScript(async () => {
           localStorage.setItem(
             'persistCode',
-            `yo = 5
+            `@settings(defaultLengthUnit = in)
+yo = 5
 part001 = startSketchOn(XZ)
   |> startProfileAt([-7.54, -26.74], %)
   |> line(end = [74.36, 130.4])
@@ -768,7 +749,8 @@ part002 = startSketchOn(XZ)
         await page.addInitScript(async (customCode) => {
           localStorage.setItem(
             'persistCode',
-            `yo = 5
+            `@settings(defaultLengthUnit = in)
+      yo = 5
       part001 = startSketchOn(XZ)
         |> startProfileAt([-7.54, -26.74], %)
         |> line(end = [74.36, 130.4])
@@ -869,7 +851,8 @@ part002 = startSketchOn(XZ)
         await page.addInitScript(async () => {
           localStorage.setItem(
             'persistCode',
-            `yo = 5
+            `@settings(defaultLengthUnit = in)
+      yo = 5
       part001 = startSketchOn(XZ)
         |> startProfileAt([-7.54, -26.74], %)
         |> line(end = [74.36, 130.4])
@@ -935,12 +918,12 @@ part002 = startSketchOn(XZ)
   test.describe('Axis & segment - no modal constraints', () => {
     const cases = [
       {
-        codeAfter: `|> line(endAbsolute = [154.9, ZERO])`,
+        codeAfter: `|> line(endAbsolute = [154.9, turns::ZERO])`,
         axisClick: { x: 950, y: 250 },
         constraintName: 'Snap To X',
       },
       {
-        codeAfter: `|> line(endAbsolute = [ZERO, 61.34])`,
+        codeAfter: `|> line(endAbsolute = [turns::ZERO, 61.34])`,
         axisClick: { x: 600, y: 150 },
         constraintName: 'Snap To Y',
       },
@@ -950,7 +933,8 @@ part002 = startSketchOn(XZ)
         await page.addInitScript(async () => {
           localStorage.setItem(
             'persistCode',
-            `yo = 5
+            `@settings(defaultLengthUnit = in)
+      yo = 5
       part001 = startSketchOn(XZ)
         |> startProfileAt([-7.54, -26.74], %)
         |> line(end = [74.36, 130.4])
@@ -1117,9 +1101,19 @@ test.describe('Electron constraint tests', () => {
       await context.folderSetupFn(async (dir) => {
         const bracketDir = path.join(dir, 'test-sample')
         await fsp.mkdir(bracketDir, { recursive: true })
-        await fsp.copyFile(
-          executorInputPath('angled_line.kcl'),
-          path.join(bracketDir, 'main.kcl')
+        await fsp.writeFile(
+          path.join(bracketDir, 'main.kcl'),
+          `@settings(defaultLengthUnit = in)
+          const part001 = startSketchOn(XY)
+            |> startProfileAt([4.83, 12.56], %)
+            |> line(end = [15.1, 2.48])
+            |> line(end = [3.15, -9.85], tag = $seg01)
+            |> line(end = [-15.17, -4.1])
+            |> angledLine([segAng(seg01), 12.35], %)
+            |> line(end = [-13.02, 10.03])
+            |> close()
+            |> extrude(length = 4)`,
+          'utf-8'
         )
       })
 

e2e/playwright/testing-gizmo.spec.ts

@@ -255,7 +255,7 @@ test.describe(`Testing gizmo, fixture-based`, () => {
     await context.addInitScript(() => {
       localStorage.setItem(
         'persistCode',
-        `
+        `@settings(defaultLengthUnit = in)
         const sketch002 = startSketchOn(XZ)
           |> startProfileAt([-108.83, -57.48], %)
           |> angledLine([0, 105.13], %, $rectangleSegmentA001)

e2e/playwright/testing-samples-loading.spec.ts

@@ -46,7 +46,7 @@ test.describe('Testing in-app sample loading', () => {
       page.getByRole('option', {
         name,
       })
-    const warningText = page.getByText('Overwrite current file and units?')
+    const warningText = page.getByText('Overwrite current file with sample?')
     const confirmButton = page.getByRole('button', { name: 'Submit command' })
 
     await test.step(`Precondition: check the initial code`, async () => {
@@ -110,11 +110,9 @@ test.describe('Testing in-app sample loading', () => {
       const commandMethodOption = page.getByRole('option', {
         name: 'Overwrite',
       })
-      const newFileWarning = page.getByText(
-        'Create a new file, overwrite project units?'
-      )
+      const newFileWarning = page.getByText('Create a new file from sample?')
       const overwriteWarning = page.getByText(
-        'Overwrite current file and units?'
+        'Overwrite current file with sample?'
       )
       const confirmButton = page.getByRole('button', { name: 'Submit command' })
       const projectMenuButton = page.getByTestId('project-sidebar-toggle')

e2e/playwright/testing-segment-overlays.spec.ts

@@ -210,7 +210,8 @@ test.describe('Testing segment overlays', { tag: ['@skipWin'] }, () => {
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `part001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+      part001 = startSketchOn(XZ)
         |> startProfileAt([5 + 0, 20 + 0], %)
         |> line(end = [0.5, -14 + 0])
         |> angledLine({ angle = 3 + 0, length = 32 + 0 }, %)
@@ -380,7 +381,8 @@ test.describe('Testing segment overlays', { tag: ['@skipWin'] }, () => {
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `yRel001 = -14
+          `@settings(defaultLengthUnit = in)
+    yRel001 = -14
     xRel001 = 0.5
     angle001 = 3
     len001 = 32
@@ -459,7 +461,8 @@ test.describe('Testing segment overlays', { tag: ['@skipWin'] }, () => {
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `part001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+      part001 = startSketchOn(XZ)
         |> startProfileAt([0, 0], %)
         |> line(end = [0.5, -14 + 0])
         |> angledLine({ angle = 3 + 0, length = 32 + 0 }, %)
@@ -590,7 +593,8 @@ test.describe('Testing segment overlays', { tag: ['@skipWin'] }, () => {
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `part001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+      part001 = startSketchOn(XZ)
         |> startProfileAt([0, 0], %)
         |> line(end = [0.5, -14 + 0])
         |> angledLine({ angle = 3 + 0, length = 32 + 0 }, %)
@@ -751,7 +755,8 @@ test.describe('Testing segment overlays', { tag: ['@skipWin'] }, () => {
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `part001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+      part001 = startSketchOn(XZ)
         |> startProfileAt([0, 0], %)
         |> line(end = [0.5, -14 + 0])
         |> angledLine({ angle = 3 + 0, length = 32 + 0 }, %)
@@ -831,7 +836,8 @@ test.describe('Testing segment overlays', { tag: ['@skipWin'] }, () => {
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `sketch001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([56.37, 120.33], sketch001)
   |> line(end = [162.86, 106.48])
   |> arcTo({
@@ -957,7 +963,8 @@ profile001 = startProfileAt([56.37, 120.33], sketch001)
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `part001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+part001 = startSketchOn(XZ)
       |> circle(center = [1 + 0, 0], radius = 8)
     `
         )
@@ -1077,7 +1084,8 @@ profile001 = startProfileAt([56.37, 120.33], sketch001)
       await page.addInitScript(async () => {
         localStorage.setItem(
           'persistCode',
-          `part001 = startSketchOn(XZ)
+          `@settings(defaultLengthUnit = in)
+part001 = startSketchOn(XZ)
   |>startProfileAt([0, 0], %)
   |> line(end = [0.5, -14 + 0])
   |> angledLine({ angle = 3 + 0, length = 32 + 0 }, %)
@@ -1351,7 +1359,8 @@ profile001 = startProfileAt([56.37, 120.33], sketch001)
             async ({ lineToBeDeleted, extraLine }) => {
               localStorage.setItem(
                 'persistCode',
-                `part001 = startSketchOn(XZ)
+                `@settings(defaultLengthUnit = in)
+        part001 = startSketchOn(XZ)
           |> startProfileAt([5, 6], %)
           |> ${lineToBeDeleted}
           |> line(end = [-10, -15])
@@ -1516,7 +1525,8 @@ profile001 = startProfileAt([56.37, 120.33], sketch001)
           async ({ lineToBeDeleted }) => {
             localStorage.setItem(
               'persistCode',
-              `part001 = startSketchOn(XZ)
+              `@settings(defaultLengthUnit = in)
+      part001 = startSketchOn(XZ)
         |> startProfileAt([5, 6], %)
         |> ${lineToBeDeleted}
         |> line(end = [-10, -15])

e2e/playwright/testing-selections.spec.ts

@@ -68,20 +68,20 @@ test.describe('Testing selections', { tag: ['@skipWin'] }, () => {
     await u.closeDebugPanel()
     await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
     await expect(page.locator('.cm-content')).toHaveText(
-      `sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${commonPoints.startAt}, sketch001)`
+      `@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${commonPoints.startAt}, sketch001)`
     )
 
     await page.waitForTimeout(100)
     await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
 
     await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${commonPoints.startAt}, sketch001)
+      .toHaveText(`@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${commonPoints.startAt}, sketch001)
     |> xLine(length = ${commonPoints.num1})`)
 
     await page.waitForTimeout(100)
     await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 20)
     await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${
+      .toHaveText(`@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${
       commonPoints.startAt
     }, sketch001)
     |> xLine(length = ${commonPoints.num1})
@@ -89,7 +89,7 @@ test.describe('Testing selections', { tag: ['@skipWin'] }, () => {
     await page.waitForTimeout(100)
     await page.mouse.click(startXPx, 500 - PUR * 20)
     await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${
+      .toHaveText(`@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XZ)profile001 = startProfileAt(${
       commonPoints.startAt
     }, sketch001)
     |> xLine(length = ${commonPoints.num1})
@@ -260,7 +260,8 @@ test.describe('Testing selections', { tag: ['@skipWin'] }, () => {
     await page.addInitScript(async () => {
       localStorage.setItem(
         'persistCode',
-        `sketch001 = startSketchOn(XZ)
+        `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
   |> startProfileAt([-79.26, 95.04], %)
   |> line(end = [112.54, 127.64], tag = $seg02)
   |> line(end = [170.36, -121.61], tag = $seg01)
@@ -528,7 +529,8 @@ profile001 = startProfileAt([7.49, 9.96], sketch001)
     await page.addInitScript(async (KCL_DEFAULT_LENGTH) => {
       localStorage.setItem(
         'persistCode',
-        `part001 = startSketchOn(XZ)
+        `@settings(defaultLengthUnit = in)
+part001 = startSketchOn(XZ)
   |> startProfileAt([20, 0], %)
   |> line(end = [7.13, 4 + 0])
   |> angledLine({ angle = 3 + 0, length = 3.14 + 0 }, %)
@@ -747,7 +749,8 @@ profile001 = startProfileAt([7.49, 9.96], sketch001)
     await page.waitForTimeout(200)
 
     await u.removeCurrentCode()
-    await u.codeLocator.fill(`sketch001 = startSketchOn(XZ)
+    await u.codeLocator.fill(`@settings(defaultLengthUnit = in)
+    sketch001 = startSketchOn(XZ)
     |> startProfileAt([75.8, 317.2], %) // [$startCapTag, $EndCapTag]
     |> angledLine([0, 268.43], %, $rectangleSegmentA001)
     |> angledLine([
@@ -965,7 +968,8 @@ profile001 = startProfileAt([7.49, 9.96], sketch001)
       async ({ cases }) => {
         localStorage.setItem(
           'persistCode',
-          `yo = 79
+          `@settings(defaultLengthUnit = in)
+  yo = 79
   part001 = startSketchOn(XZ)
     |> startProfileAt([-7.54, -26.74], %)
     |> ${cases[0].expectedCode}
@@ -1020,7 +1024,8 @@ profile001 = startProfileAt([7.49, 9.96], sketch001)
     await page.addInitScript(async () => {
       localStorage.setItem(
         'persistCode',
-        `sketch001 = startSketchOn(XZ)
+        `@settings(defaultLengthUnit = in)
+  sketch001 = startSketchOn(XZ)
     |> startProfileAt([-79.26, 95.04], %)
     |> line(end = [112.54, 127.64])
     |> line(end = [170.36, -121.61], tag = $seg01)
@@ -1253,7 +1258,7 @@ profile001 = startProfileAt([7.49, 9.96], sketch001)
     await page.mouse.click(700, 200)
 
     await expect(page.locator('.cm-content')).toHaveText(
-      `sketch001 = startSketchOn(XZ)`
+      `@settings(defaultLengthUnit = in)sketch001 = startSketchOn(XZ)`
     )
 
     await page.waitForTimeout(600)

e2e/playwright/testing-settings.spec.ts

@@ -271,7 +271,7 @@ test.describe('Testing settings', () => {
           const bracketDir = join(dir, projectName)
           await fsp.mkdir(bracketDir, { recursive: true })
           await fsp.copyFile(
-            executorInputPath('focusrite_scarlett_mounting_braket.kcl'),
+            executorInputPath('cylinder-inches.kcl'),
             join(bracketDir, 'main.kcl')
           )
         }
@@ -699,19 +699,19 @@ test.describe('Testing settings', () => {
           name: 'Current units are: ',
         })
         await gizmo.click()
-        const button = page.getByRole('button', {
+        const button = page.locator('ul').getByRole('button', {
           name: copy,
           exact: true,
         })
         await button.click()
         const toastMessage = page.getByText(
-          `Set default unit to "${unitOfMeasure}" for this project`
+          `Updated per-file units to ${unitOfMeasure}`
         )
         await expect(toastMessage).toBeVisible()
       }
 
-      await changeUnitOfMeasureInGizmo('in', 'Inches')
       await changeUnitOfMeasureInGizmo('ft', 'Feet')
+      await changeUnitOfMeasureInGizmo('in', 'Inches')
       await changeUnitOfMeasureInGizmo('yd', 'Yards')
       await changeUnitOfMeasureInGizmo('mm', 'Millimeters')
       await changeUnitOfMeasureInGizmo('cm', 'Centimeters')
@@ -951,9 +951,9 @@ test.describe('Testing settings', () => {
       )
     })
 
-    await test.step(`Initial units from settings`, async () => {
+    await test.step(`Initial units from settings are ignored`, async () => {
       await homePage.openProject('project-000')
-      await expect(unitsIndicator).toHaveText('Current units are: in')
+      await expect(unitsIndicator).toHaveText('Current units are: mm')
     })
 
     await test.step(`Manually write inline settings`, async () => {

e2e/playwright/various.spec.ts

@@ -67,11 +67,11 @@ part001 = startSketchOn(-XZ)
 |> xLine(endAbsolute = totalLen, tag = $seg03)
 |> yLine(length = -armThick, tag = $seg01)
 |> angledLineThatIntersects({
-      angle = HALF_TURN,
+      angle = turns::HALF_TURN,
       offset = -armThick,
       intersectTag = seg04
     }, %)
-|> angledLineToY([segAng(seg04) + 180, ZERO], %)
+|> angledLineToY([segAng(seg04) + 180, turns::ZERO], %)
 |> angledLineToY({
       angle = -bottomAng,
       to = -totalHeightHalf - armThick,
@@ -79,12 +79,12 @@ part001 = startSketchOn(-XZ)
 |> xLine(endAbsolute = segEndX(seg03) + 0)
 |> yLine(length = -segLen(seg01))
 |> angledLineThatIntersects({
-      angle = HALF_TURN,
+      angle = turns::HALF_TURN,
       offset = -armThick,
       intersectTag = seg02
     }, %)
 |> angledLineToY([segAng(seg02) + 180, -baseHeight], %)
-|> xLine(endAbsolute = ZERO)
+|> xLine(endAbsolute = turns::ZERO)
 |> close()
 |> extrude(length = 4)`
       )
@@ -483,7 +483,8 @@ test('Sketch on face', async ({ page, homePage, scene, cmdBar, toolbar }) => {
   await page.addInitScript(async () => {
     localStorage.setItem(
       'persistCode',
-      `sketch001 = startSketchOn(XZ)
+      `@settings(defaultLengthUnit = in)
+sketch001 = startSketchOn(XZ)
 |> startProfileAt([3.29, 7.86], %)
 |> line(end = [2.48, 2.44])
 |> line(end = [2.66, 1.17])

interface.d.ts

@@ -3,6 +3,18 @@ import fsSync from 'node:fs'
 import path from 'path'
 import { dialog, shell } from 'electron'
 import { MachinesListing } from 'components/MachineManagerProvider'
+import type { Channel } from 'src/menu/channels'
+import { Menu, WebContents } from 'electron'
+import { ZooLabel, ZooMenuEvents } from 'menu/roles'
+import type { MenuActionIPC } from 'menu/rules'
+import type { WebContentSendPayload } from 'menu/channels'
+
+// Extend the interface with additional custom properties
+declare module 'electron' {
+  interface Menu {
+    label?: ZooLabel
+  }
+}
 
 type EnvFn = (value?: string) => string
 
@@ -44,6 +56,9 @@ export interface IElectronAPI {
   rm: typeof fs.rm
   stat: (path: string) => ReturnType<fs.stat>
   statIsDirectory: (path: string) => Promise<boolean>
+  canReadWriteDirectory: (
+    path: string
+  ) => Promise<{ value: boolean; error: unknown }>
   path: typeof path
   mkdir: typeof fs.mkdir
   join: typeof path.join
@@ -91,6 +106,14 @@ export interface IElectronAPI {
   appCheckForUpdates: () => Promise<unknown>
   getArgvParsed: () => any
   getAppTestProperty: (propertyName: string) => any
+
+  // Helper functions to create application Menus
+  createHomePageMenu: () => Promise<any>
+  createModelingPageMenu: () => Promise<any>
+  createFallbackMenu: () => Promise<any>
+  enableMenu(menuId: string): Promise<any>
+  disableMenu(menuId: string): Promise<any>
+  menuOn: (callback: (payload: WebContentSendPayload) => void) => any
 }
 
 declare global {