hacky shit

Signed-off-by: Jess Frazelle <github@jessfraz.com>

.codespellrc

@@ -1,3 +1,3 @@
 [codespell]
-ignore-words-list: crate,everytime,inout,co-ordinate,ot,nwo,atleast,ue,afterall,ser,fromM,FromM
+ignore-words-list: crate,everytime,inout,co-ordinate,ot,nwo,atleast,ue,afterall,ser
 skip: **/target,node_modules,build,dist,./out,**/Cargo.lock,./docs/kcl/*.md,.yarn.lock,**/yarn.lock,./openapi/*.json,./packages/codemirror-lang-kcl/test/all.test.ts,./public/kcl-samples,./rust/kcl-lib/tests/kcl_samples,tsconfig.tsbuildinfo

.github/ci-cd-scripts/start-vector-macos.sh

@@ -1,24 +0,0 @@
-#!/bin/bash
-set -euo pipefail
-
-# Install vector
-brew tap vectordotdev/brew && brew install vector
-
-# Configure vector
-mkdir -p /tmp/vector
-cp .github/workflows/vector.toml /tmp/vector.toml
-sed -i '' "s#OS_NAME#${OS_NAME}#g" /tmp/vector.toml
-sed -i '' "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
-sed -i '' "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
-sed -i '' "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
-sed -i '' "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
-sed -i '' "s#GH_ACTIONS_AXIOM_TOKEN#${GH_ACTIONS_AXIOM_TOKEN}#g" /tmp/vector.toml
-
-# Display settings
-echo
-echo 'Vector config:'
-cat /tmp/vector.toml
-echo
-
-# Start in the background
-$(brew --prefix)/opt/vector/bin/vector --config /tmp/vector.toml &

.github/ci-cd-scripts/start-vector-ubuntu.sh

@@ -1,24 +0,0 @@
-#!/bin/bash
-set -euo pipefail
-
-# Install vector
-curl --proto '=https' --tlsv1.2 -sSfL https://sh.vector.dev | bash -s -- -y
-
-# Configure vector
-mkdir -p /tmp/vector
-cp .github/workflows/vector.toml /tmp/vector.toml
-sed -i "s#OS_NAME#${OS_NAME}#g" /tmp/vector.toml
-sed -i "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
-sed -i "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
-sed -i "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
-sed -i "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
-sed -i "s#GH_ACTIONS_AXIOM_TOKEN#${GH_ACTIONS_AXIOM_TOKEN}#g" /tmp/vector.toml
-
-# Display settings
-echo
-echo 'Vector config:'
-cat /tmp/vector.toml
-echo
-
-# Start in background
-${HOME}/.vector/bin/vector --config /tmp/vector.toml &

.github/workflows/build-and-store-wasm.yml

@@ -24,7 +24,7 @@ jobs:
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
           cache: false # Configured below.
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
       - name: Rust Cache

.github/workflows/build-apps.yml

@@ -77,7 +77,7 @@ jobs:
         with:
           cache: false # Configured below.
 
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         if: ${{ steps.wasm.outputs.should-build-wasm == 'true' }}
         with:
           tool: wasm-pack
@@ -378,7 +378,7 @@ jobs:
           NOTES: ${{ needs.prepare-files.outputs.notes }}
           PUB_DATE: ${{ github.event.repository.updated_at }}
           WEBSITE_DIR: ${{ env.IS_NIGHTLY == 'true' && 'dl.zoo.dev/releases/modeling-app/nightly' || 'dl.zoo.dev/releases/modeling-app' }}
-          URL_CODED_NAME: ${{ env.IS_NIGHTLY == 'true' && 'Zoo%20Design%20Studio%20%28Nightly%29' || 'Zoo%20Design%20Studio' }}
+          URL_CODED_NAME: ${{ env.IS_NIGHTLY == 'true' && 'Zoo%20Modeling%20App%20%28Nightly%29' || 'Zoo%20Modeling%20App' }}
         run: |
           RELEASE_DIR=https://${WEBSITE_DIR}
           jq --null-input \

.github/workflows/cargo-test.yml

@@ -34,11 +34,20 @@ jobs:
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
           cache: false # Configured below.
-      - name: Start Vector
+      - name: Install vector
-        run: .github/ci-cd-scripts/start-vector-ubuntu.sh
+        run: |
-        env:
+          curl --proto '=https' --tlsv1.2 -sSfL https://sh.vector.dev > /tmp/vector.sh
-          GH_ACTIONS_AXIOM_TOKEN: ${{ secrets.GH_ACTIONS_AXIOM_TOKEN }}
+          chmod +x /tmp/vector.sh
-          OS_NAME: ${{ env.OS_NAME }}
+          /tmp/vector.sh -y -no-modify-path
+          mkdir -p /tmp/vector
+          cp .github/workflows/vector.toml /tmp/vector.toml
+          sed -i "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
+          sed -i "s#GH_ACTIONS_AXIOM_TOKEN#${{secrets.GH_ACTIONS_AXIOM_TOKEN}}#g" /tmp/vector.toml
+          cat /tmp/vector.toml
+          ${HOME}/.vector/bin/vector --config /tmp/vector.toml &
       - uses: taiki-e/install-action@cargo-llvm-cov
       - uses: taiki-e/install-action@nextest
       - name: Install just

.github/workflows/e2e-tests.yml

@@ -140,7 +140,7 @@ jobs:
         with:
           cache: false # Configured below.
 
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         if: ${{ needs.conditions.outputs.should-run == 'true' && steps.wasm.outputs.should-build-wasm == 'true' }}
         with:
           tool: wasm-pack
@@ -339,12 +339,22 @@ jobs:
         if: needs.conditions.outputs.should-run == 'true'
         run: yarn tronb:vite:dev
 
-      - name: Start Vector
+      - name: Install vector
-        if: ${{ needs.conditions.outputs.should-run == 'true' && !contains(matrix.os, 'windows') }}
+        if: ${{ needs.conditions.outputs.should-run == 'true' && contains(matrix.os, 'ubuntu') }}
-        run: .github/ci-cd-scripts/start-vector-${{ env.OS_NAME }}.sh
+        shell: bash
-        env:
+        run: |
-          GH_ACTIONS_AXIOM_TOKEN: ${{ secrets.GH_ACTIONS_AXIOM_TOKEN }}
+          curl --proto '=https' --tlsv1.2 -sSfL https://sh.vector.dev > /tmp/vector.sh
-          OS_NAME: ${{ env.OS_NAME }}
+          chmod +x /tmp/vector.sh
+          /tmp/vector.sh -y -no-modify-path
+          mkdir -p /tmp/vector
+          cp .github/workflows/vector.toml /tmp/vector.toml
+          sed -i "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
+          sed -i "s#GH_ACTIONS_AXIOM_TOKEN#${{secrets.GH_ACTIONS_AXIOM_TOKEN}}#g" /tmp/vector.toml
+          cat /tmp/vector.toml
+          ${HOME}/.vector/bin/vector --config /tmp/vector.toml &
 
       - uses: actions/download-artifact@v4
         if: ${{ needs.conditions.outputs.should-run == 'true' && !cancelled() && (success() || failure()) }}

.github/workflows/nix.yml

@@ -1,55 +0,0 @@
-name: Test Nix Flake
-
-on:
-  push:
-    branches: [main]
-  pull_request:
-  workflow_dispatch:
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-jobs:
-  nix-flake-check:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          submodules: recursive
-
-      - uses: cachix/install-nix-action@v31
-        with:
-          nix_path: nixpkgs=channel:nixos-unstable
-
-      - name: nix flake check for all platforms
-        run: |
-          nix flake check --all-systems
-
-  nix-build-linux:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          submodules: recursive
-
-      - uses: cachix/install-nix-action@v31
-        with:
-          nix_path: nixpkgs=channel:nixos-unstable
-
-      - name: nix build . for x86_64-linux
-        run: nix build .
-
-  nix-build-macos:
-    runs-on: macos-latest
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          submodules: recursive
-
-      - uses: cachix/install-nix-action@v31
-        with:
-          nix_path: nixpkgs=channel:nixos-unstable
-
-      - name: nix build . for x86_64-darwin
-        run: nix build .
-

.github/workflows/static-analysis.yml

@@ -51,7 +51,7 @@ jobs:
         with:
           cache: false # Configured below.
 
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
 
@@ -191,7 +191,7 @@ jobs:
           cache: 'yarn'
 
       - run: yarn install
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
 
@@ -236,7 +236,7 @@ jobs:
           cache: 'yarn'
 
       - run: yarn install
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
 

.github/workflows/vector.toml

@@ -8,7 +8,6 @@ include = ["/tmp/github-actions.log"]
 type = "remap"
 inputs = [ "github-actions-file" ]
 source = '''
-.platform = "OS_NAME"
 .action = "GITHUB_WORKFLOW"
 .repo = "GITHUB_REPOSITORY"
 .sha = "GITHUB_SHA"

.gitignore

@@ -26,7 +26,6 @@ yarn-error.log*
 .idea
 .vscode
 .helix
-result
 
 # rust
 rust/target

Makefile

@@ -5,18 +5,11 @@ all: install build check
 # INSTALL
 
 ifeq ($(OS),Windows_NT)
-export WINDOWS := true
+	CARGO ?= ~/.cargo/bin/cargo.exe
-ifndef MSYSTEM
+	WASM_PACK ?= ~/.cargo/bin/wasm-pack.exe
-export POWERSHELL := true
-endif
-endif
-
-ifdef WINDOWS
-CARGO ?= $(USERPROFILE)/.cargo/bin/cargo.exe
-WASM_PACK ?= $(USERPROFILE)/.cargo/bin/wasm-pack.exe
 else
-CARGO ?= ~/.cargo/bin/cargo
+	CARGO ?= ~/.cargo/bin/cargo
-WASM_PACK ?= ~/.cargo/bin/wasm-pack
+	WASM_PACK ?= ~/.cargo/bin/wasm-pack
 endif
 
 .PHONY: install
@@ -24,21 +17,21 @@ install: node_modules/.yarn-integrity $(CARGO) $(WASM_PACK) ## Install dependenc
 
 node_modules/.yarn-integrity: package.json yarn.lock
 	yarn install
-ifdef POWERSHELL
+ifeq ($(OS),Windows_NT)
 	@ type nul > $@
 else
 	@ touch $@
 endif
 
 $(CARGO):
-ifdef WINDOWS
+ifeq ($(OS),Windows_NT)
 	yarn install:rust:windows
 else
 	yarn install:rust
 endif
 
 $(WASM_PACK):
-ifdef WINDOWS
+ifeq ($(OS),Windows_NT)
 	yarn install:wasm-pack:cargo
 else
 	yarn install:wasm-pack:sh
@@ -64,7 +57,7 @@ build-web: install public/kcl_wasm_lib_bg.wasm build/index.html
 build-desktop: install public/kcl_wasm_lib_bg.wasm .vite/build/main.js
 
 public/kcl_wasm_lib_bg.wasm: $(CARGO_SOURCES) $(RUST_SOURCES)
-ifdef WINDOWS
+ifeq ($(OS),Windows_NT)
 	yarn build:wasm:dev:windows
 else
 	yarn build:wasm:dev
@@ -147,8 +140,8 @@ endif
 
 .PHONY: clean
 clean: ## Delete all artifacts
-ifdef POWERSHELL
+ifeq ($(OS),Windows_NT)
-	git clean --force -d -x --exclude=.env* --exclude=**/*.env
+	git clean --force -d -X
 else
 	rm -rf .vite/ build/
 	rm -rf trace.zip playwright-report/ test-results/
@@ -159,7 +152,7 @@ endif
 
 .PHONY: help
 help: install
-ifdef POWERSHELL
+ifeq ($(OS),Windows_NT)
 	@ powershell -Command "Get-Content $(MAKEFILE_LIST) | Select-String -Pattern '^[^\s]+:.*##\s.*$$' | ForEach-Object { $$line = $$_.Line -split ':.*?##\s+'; Write-Host -NoNewline $$line[0].PadRight(30) -ForegroundColor Cyan; Write-Host $$line[1] }"
 else
 	@ grep -E '^[^[:space:]]+:.*## .*$$' $(MAKEFILE_LIST) | awk 'BEGIN {FS = ":.*?## "}; {printf "\033[36m%-30s\033[0m %s\n", $$1, $$2}'

docs/kcl/abs.md

@@ -36,9 +36,9 @@ myAngle = -120
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [8, 0])
-  |> angledLine(angle = abs(myAngle), length = 5)
+  |> angledLine({ angle = abs(myAngle), length = 5 }, %)
   |> line(end = [-5, 0])
-  |> angledLine(angle = myAngle, length = 5)
+  |> angledLine({ angle = myAngle, length = 5 }, %)
   |> close()
 
 baseExtrusion = extrude(sketch001, length = 5)

docs/kcl/acos.md

@@ -33,7 +33,10 @@ acos(num: number): number
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = toDegrees(acos(0.5)), length = 10)
+  |> angledLine({
+       angle = toDegrees(acos(0.5)),
+       length = 10
+     }, %)
   |> line(end = [5, 0])
   |> line(endAbsolute = [12, 0])
   |> close()

docs/kcl/angleToMatchLengthX.md

@@ -36,7 +36,7 @@ angleToMatchLengthX(
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [2, 5], tag = $seg01)
-  |> angledLine(angle = -angleToMatchLengthX(seg01, 7, %), endAbsoluteX = 10)
+  |> angledLineToX([-angleToMatchLengthX(seg01, 7, %), 10], %)
   |> close()
 
 extrusion = extrude(sketch001, length = 5)

docs/kcl/angleToMatchLengthY.md

@@ -36,7 +36,10 @@ angleToMatchLengthY(
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [1, 2], tag = $seg01)
-  |> angledLine(angle = angleToMatchLengthY(seg01, 15, %), length = 5)
+  |> angledLine({
+       angle = angleToMatchLengthY(seg01, 15, %),
+       length = 5
+     }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/angledLine.md

@@ -10,13 +10,8 @@ Draw a line segment relative to the current origin using the polar measure of so
 
 ```js
 angledLine(
+  data: AngledLineData,
   sketch: Sketch,
-  angle: number,
-  length?: number,
-  lengthX?: number,
-  lengthY?: number,
-  endAbsoluteX?: number,
-  endAbsoluteY?: number,
   tag?: TagDeclarator,
 ): Sketch
 ```
@@ -26,14 +21,9 @@ angledLine(
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | Which sketch should this path be added to? | Yes |
+| `data` | [`AngledLineData`](/docs/kcl/types/AngledLineData) | Data to draw an angled line. | Yes |
-| `angle` | [`number`](/docs/kcl/types/number) | Which angle should the line be drawn at? | Yes |
+| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) |  | Yes |
-| `length` | [`number`](/docs/kcl/types/number) | Draw the line this distance along the given angle. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
+| [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) |  | No |
-| `lengthX` | [`number`](/docs/kcl/types/number) | Draw the line this distance along the X axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
-| `lengthY` | [`number`](/docs/kcl/types/number) | Draw the line this distance along the Y axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
-| `endAbsoluteX` | [`number`](/docs/kcl/types/number) | Draw the line along the given angle until it reaches this point along the X axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
-| `endAbsoluteY` | [`number`](/docs/kcl/types/number) | Draw the line along the given angle until it reaches this point along the Y axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
-| [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Create a new tag which refers to this line | No |
 
 ### Returns
 
@@ -46,7 +36,7 @@ angledLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> yLine(endAbsolute = 15)
-  |> angledLine(angle = 30, length = 15)
+  |> angledLine({ angle = 30, length = 15 }, %)
   |> line(end = [8, -10])
   |> yLine(endAbsolute = 0)
   |> close()

docs/kcl/asin.md

@@ -33,7 +33,10 @@ asin(num: number): number
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = toDegrees(asin(0.5)), length = 20)
+  |> angledLine({
+       angle = toDegrees(asin(0.5)),
+       length = 20
+     }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/atan.md

@@ -33,7 +33,10 @@ atan(num: number): number
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = toDegrees(atan(1.25)), length = 20)
+  |> angledLine({
+       angle = toDegrees(atan(1.25)),
+       length = 20
+     }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/atan2.md

@@ -37,7 +37,10 @@ atan2(
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = toDegrees(atan2(1.25, 2)), length = 20)
+  |> angledLine({
+       angle = toDegrees(atan2(1.25, 2)),
+       length = 20
+     }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/consts/std-math-E.md

@@ -17,10 +17,10 @@ std::math::E: number = 2.71828182845904523536028747135266250_
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(
+  |> angledLine({
     angle = 30,
     length = 2 * E ^ 2,
-  )
+  }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/consts/std-math-PI.md

@@ -18,7 +18,7 @@ std::math::PI: number = 3.14159265358979323846264338327950288_
 circumference = 70
 
 exampleSketch = startSketchOn(XZ)
- |> circle(center = [0, 0], radius = circumference / (2 * PI))
+ |> circle(center = [0, 0], radius = circumference/ (2 * PI))
 
 example = extrude(exampleSketch, length = 5)
 ```

docs/kcl/consts/std-math-TAU.md

@@ -17,10 +17,10 @@ std::math::TAU: number = 6.28318530717958647692528676655900577_
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(
+  |> angledLine({
     angle = 50,
     length = 10 * TAU,
-  )
+  }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/e.md

@@ -30,7 +30,7 @@ e(): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 30, length = 2 * e() ^ 2)
+  |> angledLine({ angle = 30, length = 2 * e() ^ 2 }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/getNextAdjacentEdge.md

@@ -30,10 +30,10 @@ getNextAdjacentEdge(tag: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
-  |> angledLine(angle = 60, length = 10)
+  |> angledLine({ angle = 60, length = 10 }, %)
-  |> angledLine(angle = 120, length = 10)
+  |> angledLine({ angle = 120, length = 10 }, %)
   |> line(end = [-10, 0])
-  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
+  |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/getOppositeEdge.md

@@ -30,10 +30,10 @@ getOppositeEdge(tag: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
-  |> angledLine(angle = 60, length = 10)
+  |> angledLine({ angle = 60, length = 10 }, %)
-  |> angledLine(angle = 120, length = 10)
+  |> angledLine({ angle = 120, length = 10 }, %)
   |> line(end = [-10, 0])
-  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
+  |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/getPreviousAdjacentEdge.md

@@ -30,10 +30,10 @@ getPreviousAdjacentEdge(tag: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
-  |> angledLine(angle = 60, length = 10)
+  |> angledLine({ angle = 60, length = 10 }, %)
-  |> angledLine(angle = 120, length = 10)
+  |> angledLine({ angle = 120, length = 10 }, %)
   |> line(end = [-10, 0])
-  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
+  |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/index.md

@@ -43,7 +43,11 @@ layout: manual
   * [`angleToMatchLengthX`](kcl/angleToMatchLengthX)
   * [`angleToMatchLengthY`](kcl/angleToMatchLengthY)
   * [`angledLine`](kcl/angledLine)
+  * [`angledLineOfXLength`](kcl/angledLineOfXLength)
+  * [`angledLineOfYLength`](kcl/angledLineOfYLength)
   * [`angledLineThatIntersects`](kcl/angledLineThatIntersects)
+  * [`angledLineToX`](kcl/angledLineToX)
+  * [`angledLineToY`](kcl/angledLineToY)
   * [`appearance`](kcl/appearance)
   * [`arc`](kcl/arc)
   * [`arcTo`](kcl/arcTo)
@@ -61,15 +65,11 @@ layout: manual
   * [`chamfer`](kcl/chamfer)
   * [`circleThreePoint`](kcl/circleThreePoint)
   * [`close`](kcl/close)
+  * [`cm`](kcl/cm)
   * [`extrude`](kcl/extrude)
   * [`fillet`](kcl/fillet)
   * [`floor`](kcl/floor)
-  * [`fromCm`](kcl/fromCm)
+  * [`ft`](kcl/ft)
-  * [`fromFt`](kcl/fromFt)
-  * [`fromInches`](kcl/fromInches)
-  * [`fromM`](kcl/fromM)
-  * [`fromMm`](kcl/fromMm)
-  * [`fromYd`](kcl/fromYd)
   * [`getCommonEdge`](kcl/getCommonEdge)
   * [`getNextAdjacentEdge`](kcl/getNextAdjacentEdge)
   * [`getOppositeEdge`](kcl/getOppositeEdge)
@@ -77,7 +77,7 @@ layout: manual
   * [`helix`](kcl/std-helix)
   * [`hole`](kcl/hole)
   * [`hollow`](kcl/hollow)
-  * [`intersect`](kcl/intersect)
+  * [`inch`](kcl/inch)
   * [`lastSegX`](kcl/lastSegX)
   * [`lastSegY`](kcl/lastSegY)
   * [`legAngX`](kcl/legAngX)
@@ -89,9 +89,11 @@ layout: manual
   * [`log`](kcl/log)
   * [`log10`](kcl/log10)
   * [`log2`](kcl/log2)
+  * [`m`](kcl/m)
   * [`map`](kcl/map)
   * [`max`](kcl/max)
   * [`min`](kcl/min)
+  * [`mm`](kcl/mm)
   * [`offsetPlane`](kcl/offsetPlane)
   * [`patternCircular2d`](kcl/patternCircular2d)
   * [`patternCircular3d`](kcl/patternCircular3d)
@@ -99,6 +101,7 @@ layout: manual
   * [`patternLinear3d`](kcl/patternLinear3d)
   * [`patternTransform`](kcl/patternTransform)
   * [`patternTransform2d`](kcl/patternTransform2d)
+  * [`polar`](kcl/polar)
   * [`polygon`](kcl/polygon)
   * [`pop`](kcl/pop)
   * [`pow`](kcl/pow)
@@ -124,7 +127,6 @@ layout: manual
   * [`sqrt`](kcl/sqrt)
   * [`startProfileAt`](kcl/startProfileAt)
   * [`startSketchOn`](kcl/startSketchOn)
-  * [`subtract`](kcl/subtract)
   * [`sweep`](kcl/sweep)
   * [`tangentToEnd`](kcl/tangentToEnd)
   * [`tangentialArc`](kcl/tangentialArc)
@@ -133,15 +135,14 @@ layout: manual
   * [`toDegrees`](kcl/toDegrees)
   * [`toRadians`](kcl/toRadians)
   * [`translate`](kcl/translate)
-  * [`union`](kcl/union)
   * [`xLine`](kcl/xLine)
   * [`yLine`](kcl/yLine)
+  * [`yd`](kcl/yd)
 * **std::math**
   * [`E`](kcl/consts/std-math-E)
   * [`PI`](kcl/consts/std-math-PI)
   * [`TAU`](kcl/consts/std-math-TAU)
   * [`cos`](kcl/std-math-cos)
-  * [`polar`](kcl/std-math-polar)
   * [`sin`](kcl/std-math-sin)
   * [`tan`](kcl/std-math-tan)
 * **std::sketch**

docs/kcl/max.md

@@ -33,7 +33,10 @@ max(args: [number]): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 70, length = max(15, 31, 4, 13, 22))
+  |> angledLine({
+       angle = 70,
+       length = max(15, 31, 4, 13, 22)
+     }, %)
   |> line(end = [20, 0])
   |> close()
 

docs/kcl/min.md

@@ -33,7 +33,10 @@ min(args: [number]): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 70, length = min(15, 31, 4, 13, 22))
+  |> angledLine({
+       angle = 70,
+       length = min(15, 31, 4, 13, 22)
+     }, %)
   |> line(end = [20, 0])
   |> close()
 

docs/kcl/pow.md

@@ -37,7 +37,7 @@ pow(
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 50, length = pow(5, 2))
+  |> angledLine({ angle = 50, length = pow(5, 2) }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/profileStart.md

@@ -29,8 +29,11 @@ profileStart(sketch: Sketch): [number]
 ```js
 sketch001 = startSketchOn(XY)
   |> startProfileAt([5, 2], %)
-  |> angledLine(angle = 120, length = 50, tag = $seg01)
+  |> angledLine({ angle = 120, length = 50 }, %, $seg01)
-  |> angledLine(angle = segAng(seg01) + 120, length = 50)
+  |> angledLine({
+       angle = segAng(seg01) + 120,
+       length = 50
+     }, %)
   |> line(end = profileStart(%))
   |> close()
   |> extrude(length = 20)

docs/kcl/reduce.md

@@ -78,7 +78,7 @@ assertEqual(sum, 6, 0.00001, "1 + 2 + 3 summed is 6")
 ```js
 // Declare a function that sketches a decagon.
 fn decagon(radius) {
-  // Each side of the decagon is turned this many radians from the previous angle.
+  // Each side of the decagon is turned this many degrees from the previous angle.
   stepAngle = 1 / 10 * TAU
 
   // Start the decagon sketch at this point.

docs/kcl/rotate.md

@@ -151,9 +151,15 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
+  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
+  |> angledLine([
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
+       segAng(rectangleSegmentA001) - 90,
+       50.61
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 

docs/kcl/scale.md

@@ -85,9 +85,15 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
+  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
+  |> angledLine([
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
+       segAng(rectangleSegmentA001) - 90,
+       50.61
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 

docs/kcl/segAng.md

@@ -32,9 +32,9 @@ exampleSketch = startSketchOn(XZ)
   |> line(end = [10, 0])
   |> line(end = [5, 10], tag = $seg01)
   |> line(end = [-10, 0])
-  |> angledLine(angle = segAng(seg01), length = 10)
+  |> angledLine([segAng(seg01), 10], %)
   |> line(end = [-10, 0])
-  |> angledLine(angle = segAng(seg01), length = -15)
+  |> angledLine([segAng(seg01), -15], %)
   |> close()
 
 example = extrude(exampleSketch, length = 4)

docs/kcl/segLen.md

@@ -29,9 +29,9 @@ segLen(tag: TagIdentifier): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 60, length = 10, tag = $thing)
+  |> angledLine({ angle = 60, length = 10 }, %, $thing)
   |> tangentialArc({ offset = -120, radius = 5 }, %)
-  |> angledLine(angle = -60, length = segLen(thing))
+  |> angledLine({ angle = -60, length = segLen(thing) }, %)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/settings.md

@@ -6,7 +6,7 @@ layout: manual
 
 # KCL Settings
 
-There are three levels of settings available in Zoo Design Studio:
+There are three levels of settings available in the KittyCAD Design Studiolication:
 
 1. [User Settings](/docs/kcl/settings/user): Global settings that apply to all projects, stored in `user.toml`
 2. [Project Settings](/docs/kcl/settings/project): Settings specific to a project, stored in `project.toml`
@@ -14,7 +14,7 @@ There are three levels of settings available in Zoo Design Studio:
 
 ## Configuration Files
 
-Zoo Design Studio uses TOML files for configuration:
+The KittyCAD Design Studio uses TOML files for configuration:
 
 * **User Settings**: `user.toml` - See [complete documentation](/docs/kcl/settings/user)
 * **Project Settings**: `project.toml` - See [complete documentation](/docs/kcl/settings/project)

docs/kcl/settings/user.md

@@ -96,7 +96,7 @@ Permanently dismiss the banner warning to download the desktop app. This setting
 
 ##### stream_idle_mode
 
-When the user is idle, teardown the stream after some time.
+When the user is idle, and this is true, the stream will be torn down.
 
 
 **Default:** None

docs/kcl/sqrt.md

@@ -33,7 +33,7 @@ sqrt(num: number): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 50, length = sqrt(2500))
+  |> angledLine({ angle = 50, length = sqrt(2500) }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/std-helix.md

@@ -9,15 +9,7 @@ Create a helix.
 
 
 ```js
-helix(
+helix(revolutions: number(_), angleStart: number(deg), ccw?: bool, radius?: number(mm), axis?: Axis3d | Edge, length?: number(mm), cylinder?: Solid): Helix
-  revolutions: number(_),
-  angleStart: number(deg),
-  ccw?: bool,
-  radius?: number(mm),
-  axis?: Axis3d | Edge,
-  length?: number(mm),
-  cylinder?: Solid,
-): Helix
 ```
 
 

docs/kcl/std-math-cos.md

@@ -29,10 +29,10 @@ cos(@num: number(rad)): number(_)
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(
+  |> angledLine({
     angle = 30,
     length = 3 / cos(toRadians(30)),
-  )
+  }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/std-math-tan.md

@@ -29,10 +29,10 @@ tan(@num: number(rad)): number(_)
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(
+  |> angledLine({
     angle = 50,
     length = 50 * tan(1/2),
-  )
+  }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/std-sketch-circle.md

@@ -6,16 +6,10 @@ layout: manual
 
 
 
-Construct a 2-dimensional circle, of the specified radius, centered at
+Construct a 2-dimensional circle, of the specified radius, centered atthe provided (x, y) origin point.
-the provided (x, y) origin point.
 
 ```js
-circle(
+circle(@sketch_or_surface: Sketch | Plane | Face, center: Point2d, radius: number, tag?: tag): Sketch
-  @sketch_or_surface: Sketch | Plane | Face,
-  center: Point2d,
-  radius: number,
-  tag?: tag,
-): Sketch
 ```
 
 

docs/kcl/std-sketch-mirror2d.md

@@ -11,10 +11,7 @@ Only works on unclosed sketches for now.
 Mirror occurs around a local sketch axis rather than a global axis.
 
 ```js
-mirror2d(
+mirror2d(@sketches: [Sketch; 1+], axis: Axis2d | Edge): Sketch
-  @sketches: [Sketch; 1+],
-  axis: Axis2d | Edge,
-): Sketch
 ```
 
 

docs/kcl/sweep.md

@@ -91,9 +91,15 @@ springSketch = startSketchOn(YZ)
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
+  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
+  |> angledLine([
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
+       segAng(rectangleSegmentA001) - 90,
+       50.61
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 

docs/kcl/tangentToEnd.md

@@ -32,7 +32,10 @@ pillSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [20, 0])
   |> tangentialArcToRelative([0, 10], %, $arc1)
-  |> angledLine(angle = tangentToEnd(arc1), length = 20)
+  |> angledLine({
+       angle = tangentToEnd(arc1),
+       length = 20
+     }, %)
   |> tangentialArcToRelative([0, -10], %)
   |> close()
 
@@ -47,7 +50,10 @@ pillSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [0, 20])
   |> tangentialArcTo([10, 20], %, $arc1)
-  |> angledLine(angle = tangentToEnd(arc1), length = 20)
+  |> angledLine({
+       angle = tangentToEnd(arc1),
+       length = 20
+     }, %)
   |> tangentialArcToRelative([-10, 0], %)
   |> close()
 
@@ -60,7 +66,10 @@ pillExtrude = extrude(pillSketch, length = 10)
 rectangleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0], tag = $seg1)
-  |> angledLine(angle = tangentToEnd(seg1), length = 10)
+  |> angledLine({
+       angle = tangentToEnd(seg1),
+       length = 10
+     }, %)
   |> line(end = [0, 10])
   |> line(end = [-20, 0])
   |> close()
@@ -74,7 +83,7 @@ rectangleExtrude = extrude(rectangleSketch, length = 10)
 bottom = startSketchOn(XY)
   |> startProfileAt([0, 0], %)
   |> arcTo({ end = [10, 10], interior = [5, 1] }, %, $arc1)
-  |> angledLine(angle = tangentToEnd(arc1), length = 20)
+  |> angledLine([tangentToEnd(arc1), 20], %)
   |> close()
 ```
 
@@ -86,7 +95,7 @@ circSketch = startSketchOn(XY)
 
 triangleSketch = startSketchOn(XY)
   |> startProfileAt([-5, 0], %)
-  |> angledLine(angle = tangentToEnd(circ), length = 10)
+  |> angledLine([tangentToEnd(circ), 10], %)
   |> line(end = [-15, 0])
   |> close()
 ```

docs/kcl/tangentialArc.md

@@ -35,9 +35,9 @@ tangentialArc(
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 60, length = 10)
+  |> angledLine({ angle = 60, length = 10 }, %)
   |> tangentialArc({ radius = 10, offset = -120 }, %)
-  |> angledLine(angle = -60, length = 10)
+  |> angledLine({ angle = -60, length = 10 }, %)
   |> close()
 
 example = extrude(exampleSketch, length = 10)

docs/kcl/tangentialArcTo.md

@@ -35,7 +35,7 @@ tangentialArcTo(
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 60, length = 10)
+  |> angledLine({ angle = 60, length = 10 }, %)
   |> tangentialArcTo([15, 15], %)
   |> line(end = [10, -15])
   |> close()

docs/kcl/tangentialArcToRelative.md

@@ -35,7 +35,7 @@ tangentialArcToRelative(
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 45, length = 10)
+  |> angledLine({ angle = 45, length = 10 }, %)
   |> tangentialArcToRelative([0, -10], %)
   |> line(end = [-10, 0])
   |> close()

docs/kcl/tau.md

@@ -30,7 +30,7 @@ tau(): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 50, length = 10 * tau())
+  |> angledLine({ angle = 50, length = 10 * tau() }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/toDegrees.md

@@ -33,7 +33,10 @@ toDegrees(num: number): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 50, length = 70 * cos(toDegrees(pi() / 4)))
+  |> angledLine({
+       angle = 50,
+       length = 70 * cos(toDegrees(pi() / 4))
+     }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/toRadians.md

@@ -33,7 +33,10 @@ toRadians(num: number): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 50, length = 70 * cos(toRadians(45)))
+  |> angledLine({
+       angle = 50,
+       length = 70 * cos(toRadians(45))
+     }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/translate.md

@@ -86,9 +86,15 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
+  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
+  |> angledLine([
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
+       segAng(rectangleSegmentA001) - 90,
+       50.61
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 

docs/kcl/types.md

@@ -184,17 +184,15 @@ way:
 ```norun
 startSketchOn('XZ')
   |> startProfileAt(origin, %)
-  |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+  |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-  |> angledLine(
+  |> angledLine({
        angle = segAng(rectangleSegmentA001) - 90,
        length = 196.99,
-       tag = $rectangleSegmentB001,
+     }, %, $rectangleSegmentB001)
-     )
+  |> angledLine({
-  |> angledLine(
        angle = segAng(rectangleSegmentA001),
        length = -segLen(rectangleSegmentA001),
-       tag = $rectangleSegmentC001,
+     }, %, $rectangleSegmentC001)
-     )
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 ```
@@ -219,17 +217,15 @@ However if the code was written like this:
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-    |> angledLine(
+    |> angledLine({
          angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99,
+         length = 196.99
-         tag = $rectangleSegmentB001,
+       }, %, $rectangleSegmentB001)
-       )
+    |> angledLine({
-    |> angledLine(
          angle = segAng(rectangleSegmentA001),
          length = -segLen(rectangleSegmentA001)
-         tag = $rectangleSegmentC001,
+       }, %, $rectangleSegmentC001)
-       )
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }
@@ -249,17 +245,15 @@ For example the following code works.
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-    |> angledLine(
+    |> angledLine({
          angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99,
+         length = 196.99
-         tag = $rectangleSegmentB001,
+       }, %, $rectangleSegmentB001)
-       )
+    |> angledLine({
-    |> angledLine(
          angle = segAng(rectangleSegmentA001),
          length = -segLen(rectangleSegmentA001)
-         tag = $rectangleSegmentC001,
+       }, %, $rectangleSegmentC001)
-       )
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }

docs/kcl/types/KclValue.md

@@ -252,7 +252,7 @@ Data for an imported geometry.
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `type` |enum: `ImportedGeometry`|  | No |
+| `type` |enum: [`ImportedGeometry`](/docs/kcl/types/ImportedGeometry)|  | No |
 | `id` |[`string`](/docs/kcl/types/string)| The ID of the imported geometry. | No |
 | `value` |`[` [`string`](/docs/kcl/types/string) `]`| The original file paths. | No |
 

docs/kcl/types/PolarCoordsData.md

@@ -0,0 +1,22 @@
+---
+title: "PolarCoordsData"
+excerpt: "Data for polar coordinates."
+layout: manual
+---
+
+Data for polar coordinates.
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `angle` |[`number`](/docs/kcl/types/number)| The angle of the line (in degrees). | No |
+| `length` |[`number`](/docs/kcl/types/number)| The length of the line. | No |
+
+

docs/kcl/types/tag.md

@@ -14,17 +14,15 @@ way:
 ```js
 startSketchOn('XZ')
   |> startProfileAt(origin, %)
-  |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+  |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-  |> angledLine(
+  |> angledLine({
        angle = segAng(rectangleSegmentA001) - 90,
        length = 196.99,
-       tag = $rectangleSegmentB001,
+     }, %, $rectangleSegmentB001)
-     )
+  |> angledLine({
-  |> angledLine(
        angle = segAng(rectangleSegmentA001),
        length = -segLen(rectangleSegmentA001),
-       tag = $rectangleSegmentC001,
+     }, %, $rectangleSegmentC001)
-     )
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 ```
@@ -48,16 +46,15 @@ However if the code was written like this:
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-    |> angledLine(
+    |> angledLine({
          angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99,
+         length = 196.99
-         tag = $rectangleSegmentB001)
+       }, %, $rectangleSegmentB001)
-    |> angledLine(
+    |> angledLine({
          angle = segAng(rectangleSegmentA001),
-         length = -segLen(rectangleSegmentA001),
+         length = -segLen(rectangleSegmentA001)
-         tag = $rectangleSegmentC001
+       }, %, $rectangleSegmentC001)
-       )
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }
@@ -77,15 +74,15 @@ For example the following code works.
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
+    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-    |> angledLine(
+    |> angledLine({
          angle = segAng(rectangleSegmentA001) - 90,
          length = 196.99
-       , %, $rectangleSegmentB001)
+       }, %, $rectangleSegmentB001)
-    |> angledLine(
+    |> angledLine({
          angle = segAng(rectangleSegmentA001),
          length = -segLen(rectangleSegmentA001)
-       , %, $rectangleSegmentC001)
+       }, %, $rectangleSegmentC001)
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }

docs/kcl/xLine.md

@@ -38,10 +38,10 @@ xLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> xLine(length = 15)
-  |> angledLine(angle = 80, length = 15)
+  |> angledLine({ angle = 80, length = 15 }, %)
   |> line(end = [8, -10])
   |> xLine(length = 10)
-  |> angledLine(angle = 120, length = 30)
+  |> angledLine({ angle = 120, length = 30 }, %)
   |> xLine(length = -15)
   |> close()
 

docs/kcl/yLine.md

@@ -38,7 +38,7 @@ yLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> yLine(length = 15)
-  |> angledLine(angle = 30, length = 15)
+  |> angledLine({ angle = 30, length = 15 }, %)
   |> line(end = [8, -10])
   |> yLine(length = -5)
   |> close()

e2e/playwright/basic-sketch.spec.ts

@@ -137,7 +137,7 @@ async function doBasicSketch(
     await page.waitForTimeout(100)
   }
 
-  await page.getByRole('button', { name: 'constraints: open menu' }).click()
+  await page.getByRole('button', { name: 'Length: open menu' }).click()
   await page.getByRole('button', { name: 'Equal Length' }).click()
 
   // Open the code pane.

e2e/playwright/boolean.spec.ts

@@ -38,7 +38,7 @@ test.describe('Point and click for boolean workflows', () => {
         path.resolve(
           __dirname,
           '../../',
-          './rust/kcl-lib/e2e/executor/inputs/boolean-setup-with-sketch-on-faces.kcl'
+          './rust/kcl-lib/e2e/executor/inputs/boolean-setup-with'
         ),
         'utf-8'
       )
@@ -46,6 +46,8 @@ test.describe('Point and click for boolean workflows', () => {
         localStorage.setItem('persistCode', file)
       }, file)
       await homePage.goToModelingScene()
+      await scene.waitForExecutionDone()
+
       await scene.settled(cmdBar)
 
       // Test coordinates for selection - these might need adjustment based on actual scene layout
@@ -75,7 +77,6 @@ test.describe('Point and click for boolean workflows', () => {
 
         // Select first object in the scene, expect there to be a pixel diff from the selection color change
         await clickFirstObject({ pixelDiff: 50 })
-        await page.waitForTimeout(1000)
 
         // For subtract, we need to proceed to the next step before selecting the second object
         if (operationName !== 'subtract') {
@@ -86,8 +87,6 @@ test.describe('Point and click for boolean workflows', () => {
         // Select second object
         await clickSecondObject({ pixelDiff: 50 })
 
-        await page.waitForTimeout(1000)
-
         // Confirm the operation in the command bar
         await cmdBar.progressCmdBar()
 

e2e/playwright/can-create-sketches-on-all-planes-and-their-back-sides.spec.ts

@@ -4,7 +4,6 @@ import { uuidv4 } from '@src/lib/utils'
 
 import type { HomePageFixture } from '@e2e/playwright/fixtures/homePageFixture'
 import type { SceneFixture } from '@e2e/playwright/fixtures/sceneFixture'
-import type { ToolbarFixture } from '@e2e/playwright/fixtures/toolbarFixture'
 import { getUtils } from '@e2e/playwright/test-utils'
 import { expect, test } from '@e2e/playwright/zoo-test'
 
@@ -16,7 +15,6 @@ test.describe(
       page: Page,
       homePage: HomePageFixture,
       scene: SceneFixture,
-      toolbar: ToolbarFixture,
       plane: string,
       clickCoords: { x: number; y: number }
     ) => {
@@ -61,12 +59,9 @@ test.describe(
       await u.sendCustomCmd(updateCamCommand)
 
       await u.closeDebugPanel()
-
       await page.mouse.click(clickCoords.x, clickCoords.y)
       await page.waitForTimeout(600) // wait for animation
 
-      await toolbar.waitUntilSketchingReady()
-
       await expect(
         page.getByRole('button', { name: 'line Line', exact: true })
       ).toBeVisible()
@@ -122,12 +117,11 @@ test.describe(
     ]
 
     for (const config of planeConfigs) {
-      test(config.plane, async ({ page, homePage, scene, toolbar }) => {
+      test(config.plane, async ({ page, homePage, scene }) => {
         await sketchOnPlaneAndBackSideTest(
           page,
           homePage,
           scene,
-          toolbar,
           config.plane,
           config.coords
         )

e2e/playwright/code-pane-and-errors.spec.ts

@@ -15,7 +15,6 @@ test.describe('Code pane and errors', { tag: ['@skipWin'] }, () => {
     page,
     homePage,
     scene,
-    cmdBar,
   }) => {
     const u = await getUtils(page)
 
@@ -37,7 +36,7 @@ extrude001 = extrude(sketch001, length = 5)`
 
     await page.setBodyDimensions({ width: 1200, height: 500 })
     await homePage.goToModelingScene()
-    await scene.settled(cmdBar)
+    await scene.waitForExecutionDone()
 
     // Ensure no badge is present
     const codePaneButtonHolder = page.locator('#code-button-holder')
@@ -172,8 +171,6 @@ extrude001 = extrude(sketch001, length = 5)`
     context,
     page,
     homePage,
-    scene,
-    cmdBar,
   }) => {
     // Load the app with the working starter code
     await context.addInitScript((code) => {
@@ -183,7 +180,9 @@ extrude001 = extrude(sketch001, length = 5)`
     await page.setBodyDimensions({ width: 1200, height: 500 })
     await homePage.goToModelingScene()
 
-    await scene.settled(cmdBar)
+    // FIXME: await scene.waitForExecutionDone() does not work. It still fails.
+    // I needed to increase this timeout to get this to pass.
+    await page.waitForTimeout(10000)
 
     // Ensure badge is present
     const codePaneButtonHolder = page.locator('#code-button-holder')

e2e/playwright/command-bar-tests.spec.ts

@@ -317,13 +317,9 @@ test.describe('Command bar tests', { tag: ['@skipWin'] }, () => {
   test('Can switch between sketch tools via command bar', async ({
     page,
     homePage,
-    scene,
-    cmdBar,
-    toolbar,
   }) => {
     await page.setBodyDimensions({ width: 1200, height: 500 })
     await homePage.goToModelingScene()
-    await scene.settled(cmdBar)
 
     const sketchButton = page.getByRole('button', { name: 'Start Sketch' })
     const cmdBarButton = page.getByRole('button', { name: 'Commands' })
@@ -347,9 +343,7 @@ test.describe('Command bar tests', { tag: ['@skipWin'] }, () => {
 
     // Start a sketch
     await sketchButton.click()
-
     await page.mouse.click(700, 200)
-    await toolbar.waitUntilSketchingReady()
 
     // Switch between sketch tools via the command bar
     await expect(lineToolButton).toHaveAttribute('aria-pressed', 'true')

e2e/playwright/desktop-export.spec.ts

@@ -11,7 +11,7 @@ import { expect, test } from '@e2e/playwright/zoo-test'
 test(
   'export works on the first try',
   { tag: ['@electron', '@skipLocalEngine'] },
-  async ({ page, context, scene, tronApp, cmdBar }, testInfo) => {
+  async ({ page, context, scene, tronApp }, testInfo) => {
     if (!tronApp) {
       fail()
     }
@@ -37,7 +37,8 @@ test(
       const projectName = page.getByText(`bracket`)
       await expect(projectName).toBeVisible()
       await projectName.click()
-      await scene.settled(cmdBar)
+      await scene.waitForExecutionDone()
+      await page.waitForTimeout(1_000) // wait for panel buttons to be available
 
       // Expect zero errors in gutter
       await expect(page.locator('.cm-lint-marker-error')).not.toBeVisible()
@@ -46,9 +47,10 @@ test(
       const exportButton = page.getByTestId('export-pane-button')
       await expect(exportButton).toBeVisible()
       await exportButton.click()
+      await page.waitForTimeout(1_000) // wait for export options to be available
 
       // Select the first format option
-      const gltfOption = cmdBar.selectOption({ name: 'glTF' })
+      const gltfOption = page.getByText('glTF')
       const exportFileName = `main.gltf` // source file is named `main.kcl`
       await expect(gltfOption).toBeVisible()
       await page.keyboard.press('Enter')
@@ -56,6 +58,7 @@ test(
       // Click the checkbox
       const submitButton = page.getByText('Confirm Export')
       await expect(submitButton).toBeVisible()
+      await page.waitForTimeout(500)
       await page.keyboard.press('Enter')
 
       // Look out for the toast message
@@ -107,7 +110,8 @@ test(
 
       // Close the file pane
       await u.closeFilePanel()
-      await scene.settled(cmdBar)
+      await scene.waitForExecutionDone()
+      await page.waitForTimeout(1_000) // wait for panel buttons to be available
 
       // Expect zero errors in gutter
       await expect(page.locator('.cm-lint-marker-error')).not.toBeVisible()
@@ -116,9 +120,10 @@ test(
       const exportButton = page.getByTestId('export-pane-button')
       await expect(exportButton).toBeVisible()
       await exportButton.click()
+      await page.waitForTimeout(1_000) // wait for export options to be available
 
       // Select the first format option
-      const gltfOption = cmdBar.selectOption({ name: 'glTF' })
+      const gltfOption = page.getByText('glTF')
       const exportFileName = `other.gltf` // source file is named `other.kcl`
       await expect(gltfOption).toBeVisible()
       await page.keyboard.press('Enter')
@@ -126,6 +131,7 @@ test(
       // Click the checkbox
       const submitButton = page.getByText('Confirm Export')
       await expect(submitButton).toBeVisible()
+      await page.waitForTimeout(500)
       await page.keyboard.press('Enter')
 
       // Look out for the toast message

e2e/playwright/editor-tests.spec.ts

@@ -78,14 +78,12 @@ sketch001 = startSketchOn(XY)
 
     // Ensure we execute the first time.
     await u.openDebugPanel()
-    await expect
+    await expect(
-      .poll(() =>
+      page.locator('[data-receive-command-type="scene_clear_all"]')
-        page.locator('[data-receive-command-type="scene_clear_all"]').count()
+    ).toHaveCount(1)
-      )
+    await expect(
-      .toBe(1)
+      page.locator('[data-message-type="execution-done"]')
-    await expect
+    ).toHaveCount(2)
-      .poll(() => page.locator('[data-message-type="execution-done"]').count())
-      .toBe(2)
 
     // Add whitespace to the end of the code.
     await u.codeLocator.click()
@@ -112,14 +110,12 @@ sketch001 = startSketchOn(XY)
   test('ensure we use the cache, and do not clear on append', async ({
     homePage,
     page,
-    scene,
-    cmdBar,
   }) => {
     const u = await getUtils(page)
     await page.setBodyDimensions({ width: 1000, height: 500 })
 
     await homePage.goToModelingScene()
-    await scene.settled(cmdBar)
+    await u.waitForPageLoad()
 
     await u.codeLocator.click()
     await page.keyboard.type(`sketch001 = startSketchOn(XY)
@@ -503,7 +499,7 @@ sketch_001 = startSketchOn(XY)
     await page.keyboard.press('ArrowLeft')
     await page.keyboard.press('ArrowRight')
 
-    await scene.connectionEstablished()
+    await scene.waitForExecutionDone()
 
     // error in guter
     await expect(page.locator('.cm-lint-marker-info').first()).toBeVisible()
@@ -1144,7 +1140,7 @@ sketch001 = startSketchOn(XZ)
   )
 
   test(
-    `Can import a local OBJ file`,
+    `Can use the import stdlib function on a local OBJ file`,
     { tag: '@electron' },
     async ({ page, context }, testInfo) => {
       test.fixme(orRunWhenFullSuiteEnabled())
@@ -1194,7 +1190,7 @@ sketch001 = startSketchOn(XZ)
           .toBeLessThan(15)
       })
       await test.step(`Write the import function line`, async () => {
-        await u.codeLocator.fill(`import 'cube.obj'\ncube`)
+        await u.codeLocator.fill(`import('cube.obj')`)
         await page.waitForTimeout(800)
       })
       await test.step(`Reset the camera before checking`, async () => {
@@ -1353,51 +1349,4 @@ sketch001 = startSketchOn(XZ)
       15
     )
   })
-
-  test(`test-toolbar-buttons`, async ({
-    page,
-    homePage,
-    toolbar,
-    scene,
-    cmdBar,
-  }) => {
-    await test.step('Load an empty file', async () => {
-      await page.addInitScript(async () => {
-        localStorage.setItem('persistCode', '')
-      })
-      await page.setBodyDimensions({ width: 1200, height: 500 })
-      await homePage.goToModelingScene()
-
-      // wait until scene is ready to be interacted with
-      await scene.connectionEstablished()
-      await scene.settled(cmdBar)
-    })
-
-    await test.step('Test toolbar button correct selection', async () => {
-      await toolbar.expectToolbarMode.toBe('modeling')
-
-      await toolbar.startSketchPlaneSelection()
-
-      // Click on a default plane
-      await page.mouse.click(700, 200)
-
-      // tools cannot be selected immediately, couldn't find an event to await instead.
-      await page.waitForTimeout(1000)
-
-      await toolbar.selectCenterRectangle()
-
-      await expect(page.getByTestId('center-rectangle')).toHaveAttribute(
-        'aria-pressed',
-        'true'
-      )
-    })
-
-    await test.step('Test Toolbar dropdown remembering last selection', async () => {
-      // Select another tool
-      await page.getByTestId('circle-center').click()
-
-      // center-rectangle should still be the active option in the rectangle dropdown
-      await expect(page.getByTestId('center-rectangle')).toBeVisible()
-    })
-  })
 })

e2e/playwright/feature-tree-pane.spec.ts

@@ -19,7 +19,7 @@ length001 = timesFive(1) * 5
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([20, 10], %)
   |> line(end = [10, 10])
-  |> angledLine(angle = -45, length = length001)
+  |> angledLine([-45, length001], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 revolve001 = revolve(sketch001, axis = X)
@@ -38,9 +38,15 @@ extrude001 = extrude(sketch002, length = 10)
 
 const FEATURE_TREE_SKETCH_CODE = `sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 0, length = 4, tag = $rectangleSegmentA001)
+  |> angledLine([0, 4], %, $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 2, tag = $rectangleSegmentB001)
+  |> angledLine([
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
+       segAng(rectangleSegmentA001) - 90,
+       2
+     ], %, $rectangleSegmentB001)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %, $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close(%)
 extrude001 = extrude(sketch001, length = 10)
@@ -58,7 +64,7 @@ test.describe('Feature Tree pane', () => {
   test(
     'User can go to definition and go to function definition',
     { tag: '@electron' },
-    async ({ context, homePage, scene, editor, toolbar, cmdBar, page }) => {
+    async ({ context, homePage, scene, editor, toolbar }) => {
       await context.folderSetupFn(async (dir) => {
         const bracketDir = join(dir, 'test-sample')
         await fsp.mkdir(bracketDir, { recursive: true })
@@ -80,13 +86,9 @@ test.describe('Feature Tree pane', () => {
           sortBy: 'last-modified-desc',
         })
         await homePage.openProject('test-sample')
-        await scene.connectionEstablished()
+        await scene.waitForExecutionDone()
-        await scene.settled(cmdBar)
+        await editor.closePane()
-
         await toolbar.openFeatureTreePane()
-        await expect
-          .poll(() => page.getByText('Feature tree').count())
-          .toBeGreaterThan(1)
       })
 
       async function testViewSource({
@@ -252,7 +254,7 @@ test.describe('Feature Tree pane', () => {
         sortBy: 'last-modified-desc',
       })
       await homePage.openProject('test-sample')
-      await scene.settled(cmdBar)
+      await scene.waitForExecutionDone()
       await toolbar.openFeatureTreePane()
     })
 
@@ -337,7 +339,7 @@ test.describe('Feature Tree pane', () => {
         sortBy: 'last-modified-desc',
       })
       await homePage.openProject('test-sample')
-      await scene.settled(cmdBar)
+      await scene.waitForExecutionDone()
       await toolbar.openFeatureTreePane()
     })
 
@@ -412,7 +414,8 @@ profile003 = startProfileAt([0, -4.93], sketch001)
     const planeColor: [number, number, number] = [74, 74, 74]
 
     await homePage.openProject('test-sample')
-    await scene.settled(cmdBar)
+    // FIXME: @lf94 has a better way to verify execution completion, in a PR rn
+    await scene.waitForExecutionDone()
 
     await test.step(`Verify we see the sketch`, async () => {
       await scene.expectPixelColor(sketchColor, testPoint, 10)

e2e/playwright/file-tree.spec.ts

@@ -47,7 +47,6 @@ test.describe('integrations tests', () => {
         await scene.connectionEstablished()
         await scene.settled(cmdBar)
         await clickObj()
-        await page.waitForTimeout(1000)
         await scene.moveNoWhere()
         await editor.expectState({
           activeLines: [
@@ -73,11 +72,11 @@ test.describe('integrations tests', () => {
       })
       await test.step('setup for next assertion', async () => {
         await toolbar.openFile('main.kcl')
-        await page.waitForTimeout(1000)
+
+        await scene.settled(cmdBar)
+
         await clickObj()
-        await page.waitForTimeout(1000)
         await scene.moveNoWhere()
-        await page.waitForTimeout(1000)
         await editor.expectState({
           activeLines: [
             '|>startProfileAt([75.8,317.2],%)//[$startCapTag,$EndCapTag]',
@@ -90,7 +89,7 @@ test.describe('integrations tests', () => {
         await toolbar.expectFileTreeState(['main.kcl', fileName])
       })
       await test.step('check sketch mode is exited when opening a different file', async () => {
-        await toolbar.openFile(fileName)
+        await toolbar.openFile(fileName, { wait: false })
 
         // check we're out of sketch mode
         await expect(toolbar.exitSketchBtn).not.toBeVisible()

e2e/playwright/fixtures/cmdBarFixture.ts

@@ -112,7 +112,10 @@ export class CmdBarFixture {
    * and assumes we are past the `pickCommand` step.
    */
   progressCmdBar = async (shouldFuzzProgressMethod = true) => {
-    await this.page.waitForTimeout(2000)
+    // FIXME: Progressing the command bar is a race condition. We have an async useEffect that reports the final state via useCalculateKclExpression. If this does not run quickly enough, it will not "fail" the continue because you can press continue if the state is not ready. E2E tests do not know this.
+    // Wait 1250ms to assume the await executeAst of the KCL input field is finished
+    await this.page.waitForTimeout(1250)
+    if (shouldFuzzProgressMethod || Math.random() > 0.5) {
       const arrowButton = this.page.getByRole('button', {
         name: 'arrow right Continue',
       })
@@ -123,6 +126,9 @@ export class CmdBarFixture {
           .getByRole('button', { name: 'checkmark Submit command' })
           .click()
       }
+    } else {
+      await this.page.keyboard.press('Enter')
+    }
   }
 
   // Added data-testid to the command bar buttons

e2e/playwright/fixtures/fixtureSetup.ts

@@ -39,8 +39,7 @@ export class AuthenticatedApp {
   }
 
   async initialise(code = '') {
-    const testDir = this.testInfo.outputPath('electron-test-projects-dir')
+    await setup(this.context, this.page, this.testInfo)
-    await setup(this.context, this.page, testDir, this.testInfo)
     const u = await getUtils(this.page)
 
     await this.page.addInitScript(async (code) => {
@@ -103,11 +102,11 @@ export class ElectronZoo {
             return resolve(undefined)
           }
 
-          if (Date.now() - timeA > 3000) {
+          if (Date.now() - timeA > 10000) {
             return resolve(undefined)
           }
 
-          setTimeout(checkDisconnected, 1)
+          setTimeout(checkDisconnected, 0)
         }
         checkDisconnected()
       })
@@ -129,9 +128,11 @@ export class ElectronZoo {
     const that = this
 
     const options = {
+      timeout: 120000,
       args: ['.', '--no-sandbox'],
       env: {
         ...process.env,
+        TEST_SETTINGS_FILE_KEY: this.projectDirName,
         IS_PLAYWRIGHT: 'true',
       },
       ...(process.env.ELECTRON_OVERRIDE_DIST_PATH
@@ -199,14 +200,7 @@ export class ElectronZoo {
 
     await this.context.tracing.startChunk()
 
-    // THIS IS ABSOLUTELY NECESSARY TO CHANGE THE PROJECT DIRECTORY BETWEEN
+    await setup(this.context, this.page, testInfo)
-    // TESTS BECAUSE OF THE ELECTRON INSTANCE REUSE.
-    await this.electron?.evaluate(({ app }, projectDirName) => {
-      // @ts-ignore can't declaration merge see main.ts
-      app.testProperty['TEST_SETTINGS_FILE_KEY'] = projectDirName
-    }, this.projectDirName)
-
-    await setup(this.context, this.page, this.projectDirName, testInfo)
 
     await this.cleanProjectDir()
 
@@ -256,6 +250,11 @@ export class ElectronZoo {
     //   return app.reuseWindowForTest();
     // });
 
+    await this.electron?.evaluate(({ app }, projectDirName) => {
+      // @ts-ignore can't declaration merge see main.ts
+      app.testProperty['TEST_SETTINGS_FILE_KEY'] = projectDirName
+    }, this.projectDirName)
+
     // Always start at the root view
     await this.page.goto(this.firstUrl)
 
@@ -279,9 +278,8 @@ export class ElectronZoo {
       // Not a problem if it already exists.
     }
 
-    const tempSettingsFilePath = path.resolve(
+    const tempSettingsFilePath = path.join(
       this.projectDirName,
-      '..',
       SETTINGS_FILE_NAME
     )
 

e2e/playwright/fixtures/homePageFixture.ts

@@ -99,6 +99,7 @@ export class HomePageFixture {
   createAndGoToProject = async (projectTitle = 'untitled') => {
     await this.projectsLoaded()
     await this.projectButtonNew.click()
+    await this.projectTextName.click()
     await this.projectTextName.fill(projectTitle)
     await this.projectButtonContinue.click()
   }

e2e/playwright/fixtures/sceneFixture.ts

@@ -43,15 +43,21 @@ type DragFromHandler = (
 export class SceneFixture {
   public page: Page
   public streamWrapper!: Locator
+  public loadingIndicator!: Locator
   public networkToggleConnected!: Locator
   public startEditSketchBtn!: Locator
 
+  get exeIndicator() {
+    return this.page
+      .getByTestId('model-state-indicator-execution-done')
+      .or(this.page.getByTestId('model-state-indicator-receive-reliable'))
+  }
+
   constructor(page: Page) {
     this.page = page
     this.streamWrapper = page.getByTestId('stream')
-    this.networkToggleConnected = page
+    this.networkToggleConnected = page.getByTestId('network-toggle-ok')
-      .getByTestId('network-toggle-ok')
+    this.loadingIndicator = this.streamWrapper.getByTestId('loading')
-      .or(page.getByTestId('network-toggle-other'))
     this.startEditSketchBtn = page
       .getByRole('button', { name: 'Start Sketch' })
       .or(page.getByRole('button', { name: 'Edit Sketch' }))
@@ -225,6 +231,10 @@ export class SceneFixture {
     }
   }
 
+  waitForExecutionDone = async () => {
+    await expect(this.exeIndicator).toBeVisible({ timeout: 30000 })
+  }
+
   connectionEstablished = async () => {
     const timeout = 30000
     await expect(this.networkToggleConnected).toBeVisible({ timeout })
@@ -233,9 +243,6 @@ export class SceneFixture {
   settled = async (cmdBar: CmdBarFixture) => {
     const u = await getUtils(this.page)
 
-    await expect(this.startEditSketchBtn).not.toBeDisabled({ timeout: 15_000 })
-    await expect(this.startEditSketchBtn).toBeVisible()
-
     await cmdBar.openCmdBar()
     await cmdBar.chooseCommand('Settings · app · show debug panel')
     await cmdBar.selectOption({ name: 'on' }).click()
@@ -243,6 +250,10 @@ export class SceneFixture {
     await u.openDebugPanel()
     await u.expectCmdLog('[data-message-type="execution-done"]')
     await u.closeDebugPanel()
+
+    await this.waitForExecutionDone()
+    await expect(this.startEditSketchBtn).not.toBeDisabled()
+    await expect(this.startEditSketchBtn).toBeVisible()
   }
 
   expectPixelColor = async (

e2e/playwright/fixtures/toolbarFixture.ts

@@ -44,7 +44,6 @@ export class ToolbarFixture {
   featureTreePane!: Locator
   gizmo!: Locator
   gizmoDisabled!: Locator
-  insertButton!: Locator
 
   constructor(page: Page) {
     this.page = page
@@ -79,14 +78,18 @@ export class ToolbarFixture {
     // element or two different elements can represent these states.
     this.gizmo = page.getByTestId('gizmo')
     this.gizmoDisabled = page.getByTestId('gizmo-disabled')
-
-    this.insertButton = page.getByTestId('insert-pane-button')
   }
 
   get logoLink() {
     return this.page.getByTestId('app-logo')
   }
 
+  get exeIndicator() {
+    return this.page
+      .getByTestId('model-state-indicator-receive-reliable')
+      .or(this.page.getByTestId('model-state-indicator-execution-done'))
+  }
+
   startSketchPlaneSelection = async () =>
     doAndWaitForImageDiff(this.page, () => this.startSketchBtn.click(), 500)
 
@@ -162,14 +165,20 @@ export class ToolbarFixture {
     }
   }
   /**
-   * Opens file by it's name
+   * Opens file by it's name and waits for execution to finish
    */
-  openFile = async (fileName: string) => {
+  openFile = async (
+    fileName: string,
+    { wait }: { wait?: boolean } = { wait: true }
+  ) => {
     await this.filePane.getByText(fileName).click()
+    if (wait) {
+      await expect(this.exeIndicator).toBeVisible({ timeout: 15_000 })
+    }
   }
   selectCenterRectangle = async () => {
     await this.page
-      .getByRole('button', { name: 'caret down rectangles:' })
+      .getByRole('button', { name: 'caret down Corner rectangle:' })
       .click()
     await expect(
       this.page.getByTestId('dropdown-center-rectangle')
@@ -178,7 +187,7 @@ export class ToolbarFixture {
   }
   selectBoolean = async (operation: 'union' | 'subtract' | 'intersect') => {
     await this.page
-      .getByRole('button', { name: 'caret down booleans: open menu' })
+      .getByRole('button', { name: 'caret down Union: open menu' })
       .click()
     const operationTestId = `dropdown-boolean-${operation}`
     await expect(this.page.getByTestId(operationTestId)).toBeVisible()
@@ -186,19 +195,25 @@ export class ToolbarFixture {
   }
 
   selectCircleThreePoint = async () => {
-    await this.page.getByRole('button', { name: 'caret down circles:' }).click()
+    await this.page
+      .getByRole('button', { name: 'caret down Center circle:' })
+      .click()
     await expect(
       this.page.getByTestId('dropdown-circle-three-points')
     ).toBeVisible()
     await this.page.getByTestId('dropdown-circle-three-points').click()
   }
   selectArc = async () => {
-    await this.page.getByRole('button', { name: 'caret down arcs:' }).click()
+    await this.page
+      .getByRole('button', { name: 'caret down Tangential Arc:' })
+      .click()
     await expect(this.page.getByTestId('dropdown-arc')).toBeVisible()
     await this.page.getByTestId('dropdown-arc').click()
   }
   selectThreePointArc = async () => {
-    await this.page.getByRole('button', { name: 'caret down arcs:' }).click()
+    await this.page
+      .getByRole('button', { name: 'caret down Tangential Arc:' })
+      .click()
     await expect(
       this.page.getByTestId('dropdown-three-point-arc')
     ).toBeVisible()

e2e/playwright/import-ui.spec.ts

@@ -10,7 +10,6 @@ test.describe('Import UI tests', () => {
     toolbar,
     scene,
     editor,
-    cmdBar,
   }) => {
     await context.folderSetupFn(async (dir) => {
       const projectDir = path.join(dir, 'import-test')
@@ -21,9 +20,15 @@ test.describe('Import UI tests', () => {
         path.join(projectDir, 'toBeImported.kcl'),
         `sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([281.54, 305.81], sketch001)
-  |> angledLine(angle = 0, length = 123.43, tag = $rectangleSegmentA001)
+  |> angledLine([0, 123.43], %, $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 85.99)
+  |> angledLine([
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
+       segAng(rectangleSegmentA001) - 90,
+       85.99
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 extrude(profile001, length = 100)`
@@ -38,9 +43,15 @@ importedCube
 
 sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([-134.53, -56.17], sketch001)
-  |> angledLine(angle = 0, length = 79.05, tag = $rectangleSegmentA001)
+  |> angledLine([0, 79.05], %, $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 76.28)
+  |> angledLine([
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $seg01)
+       segAng(rectangleSegmentA001) - 90,
+       76.28
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %, $seg01)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg02)
   |> close()
 extrude001 = extrude(profile001, length = 100)
@@ -50,7 +61,7 @@ sketch002 = startSketchOn(extrude001, seg01)`
     })
 
     await homePage.openProject('import-test')
-    await scene.settled(cmdBar)
+    await scene.waitForExecutionDone()
 
     await scene.moveCameraTo(
       {

e2e/playwright/machines.spec.ts

@@ -7,7 +7,7 @@ import { expect, test } from '@e2e/playwright/zoo-test'
 test(
   'When machine-api server not found butt is disabled and shows the reason',
   { tag: '@electron' },
-  async ({ context, page, scene, cmdBar }, testInfo) => {
+  async ({ context, page }, testInfo) => {
     await context.folderSetupFn(async (dir) => {
       const bracketDir = join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
@@ -23,7 +23,10 @@ test(
 
     await page.getByText('bracket').click()
 
-    await scene.settled(cmdBar)
+    await expect(page.getByTestId('loading')).toBeAttached()
+    await expect(page.getByTestId('loading')).not.toBeAttached({
+      timeout: 20_000,
+    })
 
     const notFoundText = 'Machine API server was not discovered'
     await expect(page.getByText(notFoundText).first()).not.toBeVisible()
@@ -44,7 +47,7 @@ test(
 test(
   'When machine-api server not found home screen & project status shows the reason',
   { tag: '@electron' },
-  async ({ context, page, scene, cmdBar }, testInfo) => {
+  async ({ context, page }, testInfo) => {
     await context.folderSetupFn(async (dir) => {
       const bracketDir = join(dir, 'bracket')
       await fsp.mkdir(bracketDir, { recursive: true })
@@ -68,7 +71,10 @@ test(
 
     await page.getByText('bracket').click()
 
-    await scene.settled(cmdBar)
+    await expect(page.getByTestId('loading')).toBeAttached()
+    await expect(page.getByTestId('loading')).not.toBeAttached({
+      timeout: 20_000,
+    })
 
     await expect(page.getByText(notFoundText).nth(1)).not.toBeVisible()
 

e2e/playwright/named-views.spec.ts

@@ -61,7 +61,6 @@ function tomlStringOverWriteNamedViewUuids(toml: string): string {
 }
 
 test.describe('Named view tests', () => {
-  test.skip() // TODO: Jace is working on these
   test('Verify project.toml is not created', async ({ page }, testInfo) => {
     // Create project and load it
     const projectName = 'named-views'
@@ -89,7 +88,7 @@ test.describe('Named view tests', () => {
 
     // Create and load project
     await createProject({ name: projectName, page })
-    await scene.settled(cmdBar)
+    await scene.waitForExecutionDone()
 
     // Create named view
     const projectDirName = testInfo.outputPath('electron-test-projects-dir')
@@ -111,17 +110,14 @@ test.describe('Named view tests', () => {
       expect(exists).toBe(true)
     }).toPass()
 
-    await expect(async () => {
     // Read project.toml into memory
     let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
-
     // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
     tomlString = tomlStringOverWriteNamedViewUuids(tomlString)
 
     // Write the entire tomlString to a snapshot.
     // There are many key/value pairs to check this is a safer match.
     expect(tomlString).toMatchSnapshot('verify-named-view-gets-created')
-    }).toPass()
   })
   test('Verify named view gets deleted', async ({
     cmdBar,
@@ -134,7 +130,7 @@ test.describe('Named view tests', () => {
 
     // Create project and go into the project
     await createProject({ name: projectName, page })
-    await scene.settled(cmdBar)
+    await scene.waitForExecutionDone()
 
     // Create a new named view
     await cmdBar.openCmdBar()
@@ -156,7 +152,6 @@ test.describe('Named view tests', () => {
       expect(exists).toBe(true)
     }).toPass()
 
-    await expect(async () => {
     // Read project.toml into memory
     let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
     // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
@@ -165,7 +160,6 @@ test.describe('Named view tests', () => {
     // Write the entire tomlString to a snapshot.
     // There are many key/value pairs to check this is a safer match.
     expect(tomlString).toMatchSnapshot('verify-named-view-gets-created')
-    }).toPass()
 
     // Delete a named view
     await cmdBar.openCmdBar()
@@ -173,16 +167,14 @@ test.describe('Named view tests', () => {
     cmdBar.selectOption({ name: myNamedView2 })
     await cmdBar.progressCmdBar(false)
 
-    await expect(async () => {
     // Read project.toml into memory again since we deleted a named view
-      let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
+    tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
     // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
     tomlString = tomlStringOverWriteNamedViewUuids(tomlString)
 
     // // Write the entire tomlString to a snapshot.
     // // There are many key/value pairs to check this is a safer match.
     expect(tomlString).toMatchSnapshot('verify-named-view-gets-deleted')
-    }).toPass()
   })
   test('Verify named view gets loaded', async ({
     cmdBar,
@@ -194,7 +186,7 @@ test.describe('Named view tests', () => {
 
     // Create project and go into the project
     await createProject({ name: projectName, page })
-    await scene.settled(cmdBar)
+    await scene.waitForExecutionDone()
 
     // Create a new named view
     await cmdBar.openCmdBar()
@@ -216,7 +208,6 @@ test.describe('Named view tests', () => {
       expect(exists).toBe(true)
     }).toPass()
 
-    await expect(async () => {
     // Read project.toml into memory
     let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
     // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
@@ -225,7 +216,6 @@ test.describe('Named view tests', () => {
     // Write the entire tomlString to a snapshot.
     // There are many key/value pairs to check this is a safer match.
     expect(tomlString).toMatchSnapshot('verify-named-view-gets-created')
-    }).toPass()
 
     // Create a load a named view
     await cmdBar.openCmdBar()
@@ -249,7 +239,7 @@ test.describe('Named view tests', () => {
 
     // Create and load project
     await createProject({ name: projectName, page })
-    await scene.settled(cmdBar)
+    await scene.waitForExecutionDone()
 
     // Create named view
     const projectDirName = testInfo.outputPath('electron-test-projects-dir')
@@ -292,7 +282,6 @@ test.describe('Named view tests', () => {
       expect(exists).toBe(true)
     }).toPass()
 
-    await expect(async () => {
     // Read project.toml into memory
     let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
     // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
@@ -301,6 +290,5 @@ test.describe('Named view tests', () => {
     // Write the entire tomlString to a snapshot.
     // There are many key/value pairs to check this is a safer match.
     expect(tomlString).toMatchSnapshot('verify-two-named-view-gets-created')
-    }).toPass()
   })
 })