WIP

docs/kcl/angledLine.md

@@ -8,17 +8,17 @@ Draw a line segment relative to the current origin using the polar measure of so
 
 
 
-```kcl
+```js
 angledLine(
-  sketch: [Sketch](/docs/kcl/types/Sketch),
-  angle: [number](/docs/kcl/types/number),
-  length?: [number](/docs/kcl/types/number),
-  lengthX?: [number](/docs/kcl/types/number),
-  lengthY?: [number](/docs/kcl/types/number),
-  endAbsoluteX?: [number](/docs/kcl/types/number),
-  endAbsoluteY?: [number](/docs/kcl/types/number),
-  tag?: [TagDeclarator](/docs/kcl/types#tag-declaration),
-): [Sketch](/docs/kcl/types/Sketch)
+  sketch: Sketch,
+  angle: number,
+  length?: number,
+  lengthX?: number,
+  lengthY?: number,
+  endAbsoluteX?: number,
+  endAbsoluteY?: number,
+  tag?: TagDeclarator,
+): Sketch
 ```
 
 
@@ -33,7 +33,7 @@ angledLine(
 | `lengthY` | [`number`](/docs/kcl/types/number) | Draw the line this distance along the Y axis. Only one of `length`, `lengthX`, `lengthY`, `endAbsoluteX`, `endAbsoluteY` can be given. | No |
 | `endAbsoluteX` | [`number`](/docs/kcl/types/number) | Draw the line along the given angle until it reaches this point along the X axis. Only one of `length`, `lengthX`, `lengthY`, `endAbsoluteX`, `endAbsoluteY` can be given. | No |
 | `endAbsoluteY` | [`number`](/docs/kcl/types/number) | Draw the line along the given angle until it reaches this point along the Y axis. Only one of `length`, `lengthX`, `lengthY`, `endAbsoluteX`, `endAbsoluteY` can be given. | No |
-| `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Create a new tag which refers to this line | No |
+| [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Create a new tag which refers to this line | No |
 
 ### Returns
 
@@ -42,7 +42,7 @@ angledLine(
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> yLine(endAbsolute = 15)

docs/kcl/angledLineThatIntersects.md

@@ -8,14 +8,14 @@ Draw an angled line from the current origin, constructing a line segment such th
 
 
 
-```kcl
+```js
 angledLineThatIntersects(
-  sketch: [Sketch](/docs/kcl/types/Sketch),
-  angle: [number](/docs/kcl/types/number),
-  intersectTag: [TagIdentifier](/docs/kcl/types#tag-identifier),
-  offset?: [number](/docs/kcl/types/number),
-  tag?: [TagDeclarator](/docs/kcl/types#tag-declaration),
-): [Sketch](/docs/kcl/types/Sketch)
+  sketch: Sketch,
+  angle: number,
+  intersectTag: TagIdentifier,
+  offset?: number,
+  tag?: TagDeclarator,
+): Sketch
 ```
 
 
@@ -27,7 +27,7 @@ angledLineThatIntersects(
 | `angle` | [`number`](/docs/kcl/types/number) | Which angle should the line be drawn at? | Yes |
 | `intersectTag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The tag of the line to intersect with | Yes |
 | `offset` | [`number`](/docs/kcl/types/number) | The offset from the intersecting line. Defaults to 0. | No |
-| `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Create a new tag which refers to this line | No |
+| [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Create a new tag which refers to this line | No |
 
 ### Returns
 
@@ -36,7 +36,7 @@ angledLineThatIntersects(
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(endAbsolute = [5, 10])

docs/kcl/assert.md

@@ -8,15 +8,15 @@ Check a value meets some expected conditions at runtime. Program terminates with
 
 
 
-```kcl
+```js
 assert(
-  actual: [number](/docs/kcl/types/number),
-  isGreaterThan?: [number](/docs/kcl/types/number),
-  isLessThan?: [number](/docs/kcl/types/number),
-  isGreaterThanOrEqual?: [number](/docs/kcl/types/number),
-  isLessThanOrEqual?: [number](/docs/kcl/types/number),
-  isEqualTo?: [number](/docs/kcl/types/number),
-  tolerance?: [number](/docs/kcl/types/number),
+  actual: number,
+  isGreaterThan?: number,
+  isLessThan?: number,
+  isGreaterThanOrEqual?: number,
+  isLessThanOrEqual?: number,
+  isEqualTo?: number,
+  tolerance?: number,
   error?: String,
 ): ()
 ```
@@ -42,7 +42,7 @@ assert(
 
 ### Examples
 
-```kcl
+```js
 n = 10
 assert(n, isEqualTo = 10)
 assert(

docs/kcl/assertIs.md

@@ -8,9 +8,9 @@ Asserts that a value is the boolean value true.
 
 
 
-```kcl
+```js
 assertIs(
-  actual: [bool](/docs/kcl/types/bool),
+  actual: bool,
   error?: String,
 ): ()
 ```
@@ -30,7 +30,7 @@ assertIs(
 
 ### Examples
 
-```kcl
+```js
 kclIsFun = true
 assertIs(kclIsFun)
 ```

docs/kcl/bezierCurve.md

@@ -8,14 +8,14 @@ Draw a smooth, continuous, curved line segment from the current origin to the de
 
 
 
-```kcl
+```js
 bezierCurve(
-  sketch: [Sketch](/docs/kcl/types/Sketch),
-  control1: [[[number](/docs/kcl/types/number)]](/docs/kcl/types/[number](/docs/kcl/types/number)),
-  control2: [[[number](/docs/kcl/types/number)]](/docs/kcl/types/[number](/docs/kcl/types/number)),
-  end: [[[number](/docs/kcl/types/number)]](/docs/kcl/types/[number](/docs/kcl/types/number)),
-  tag?: [TagDeclarator](/docs/kcl/types#tag-declaration),
-): [Sketch](/docs/kcl/types/Sketch)
+  sketch: Sketch,
+  control1: [number],
+  control2: [number],
+  end: [number],
+  tag?: TagDeclarator,
+): Sketch
 ```
 
 
@@ -27,7 +27,7 @@ bezierCurve(
 | `control1` | [`[number]`](/docs/kcl/types/number) | First control point for the cubic | Yes |
 | `control2` | [`[number]`](/docs/kcl/types/number) | Second control point for the cubic | Yes |
 | `end` | [`[number]`](/docs/kcl/types/number) | How far away (along the X and Y axes) should this line go? | Yes |
-| `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Create a new tag which refers to this line | No |
+| [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Create a new tag which refers to this line | No |
 
 ### Returns
 
@@ -36,7 +36,7 @@ bezierCurve(
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [0, 10])

docs/kcl/circleThreePoint.md

@@ -8,14 +8,14 @@ Construct a circle derived from 3 points.
 
 
 
-```kcl
+```js
 circleThreePoint(
-  sketchSurfaceOrGroup: [[Sketch](/docs/kcl/types/Sketch)OrSurface](/docs/kcl/types/[Sketch](/docs/kcl/types/Sketch)OrSurface),
-  p1: [[[number](/docs/kcl/types/number)]](/docs/kcl/types/[number](/docs/kcl/types/number)),
-  p2: [[[number](/docs/kcl/types/number)]](/docs/kcl/types/[number](/docs/kcl/types/number)),
-  p3: [[[number](/docs/kcl/types/number)]](/docs/kcl/types/[number](/docs/kcl/types/number)),
-  tag?: [TagDeclarator](/docs/kcl/types#tag-declaration),
-): [Sketch](/docs/kcl/types/Sketch)
+  sketchSurfaceOrGroup: SketchOrSurface,
+  p1: [number],
+  p2: [number],
+  p3: [number],
+  tag?: TagDeclarator,
+): Sketch
 ```
 
 
@@ -27,7 +27,7 @@ circleThreePoint(
 | `p1` | [`[number]`](/docs/kcl/types/number) | 1st point to derive the circle. | Yes |
 | `p2` | [`[number]`](/docs/kcl/types/number) | 2nd point to derive the circle. | Yes |
 | `p3` | [`[number]`](/docs/kcl/types/number) | 3rd point to derive the circle. | Yes |
-| `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Identifier for the circle to reference elsewhere. | No |
+| [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Identifier for the circle to reference elsewhere. | No |
 
 ### Returns
 
@@ -36,7 +36,7 @@ circleThreePoint(
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XY)
   |> circleThreePoint(p1 = [10, 10], p2 = [20, 8], p3 = [15, 5])
   |> extrude(length = 5)

docs/kcl/consts/std-END.md

@@ -8,7 +8,7 @@ Identifies the ending face of an extrusion. I.e., the new face created by an ext
 
 
 
-```kcl
+```js
 std::END: string = 'end'
 ```
 

docs/kcl/consts/std-START.md

@@ -8,7 +8,7 @@ Identifies the starting face of an extrusion. I.e., the face which is extruded.
 
 
 
-```kcl
+```js
 std::START: string = 'start'
 ```
 

docs/kcl/consts/std-X.md

@@ -8,7 +8,7 @@ layout: manual
 
 
 
-```kcl
+```js
 std::X
 ```
 

docs/kcl/consts/std-XY.md

@@ -8,7 +8,7 @@ layout: manual
 
 
 
-```kcl
+```js
 std::XY
 ```
 

docs/kcl/consts/std-XZ.md

@@ -8,7 +8,7 @@ layout: manual
 
 
 
-```kcl
+```js
 std::XZ
 ```
 

docs/kcl/consts/std-Y.md

@@ -8,7 +8,7 @@ layout: manual
 
 
 
-```kcl
+```js
 std::Y
 ```
 

docs/kcl/consts/std-YZ.md

@@ -8,7 +8,7 @@ layout: manual
 
 
 
-```kcl
+```js
 std::YZ
 ```
 

docs/kcl/consts/std-Z.md

@@ -8,7 +8,7 @@ layout: manual
 
 
 
-```kcl
+```js
 std::Z
 ```
 

docs/kcl/consts/std-math-E.md

@@ -8,13 +8,13 @@ The value of Euler’s number `e`.
 
 
 
-```kcl
+```js
 std::math::E: number = 2.71828182845904523536028747135266250_
 ```
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(

docs/kcl/consts/std-math-PI.md

@@ -8,13 +8,13 @@ The value of `pi`, Archimedes’ constant (π).
 
 
 
-```kcl
+```js
 std::math::PI: number(_?) = 3.14159265358979323846264338327950288_?
 ```
 
 ### Examples
 
-```kcl
+```js
 circumference = 70
 
 exampleSketch = startSketchOn(XZ)

docs/kcl/consts/std-math-TAU.md

@@ -8,13 +8,13 @@ The value of `tau`, the full circle constant (τ). Equal to 2π.
 
 
 
-```kcl
+```js
 std::math::TAU: number = 6.28318530717958647692528676655900577_
 ```
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(

docs/kcl/consts/std-turns-HALF_TURN.md

@@ -8,7 +8,7 @@ layout: manual
 
 
 
-```kcl
+```js
 std::turns::HALF_TURN: number(deg) = 180deg
 ```
 

docs/kcl/consts/std-turns-QUARTER_TURN.md

@@ -8,7 +8,7 @@ layout: manual
 
 
 
-```kcl
+```js
 std::turns::QUARTER_TURN: number(deg) = 90deg
 ```
 

docs/kcl/consts/std-turns-THREE_QUARTER_TURN.md

@@ -8,7 +8,7 @@ layout: manual
 
 
 
-```kcl
+```js
 std::turns::THREE_QUARTER_TURN: number(deg) = 270deg
 ```
 

docs/kcl/consts/std-turns-ZERO.md

@@ -8,7 +8,7 @@ layout: manual
 
 
 
-```kcl
+```js
 std::turns::ZERO: number = 0
 ```
 

docs/kcl/getCommonEdge.md

@@ -8,8 +8,8 @@ Get the shared edge between two faces.
 
 
 
-```kcl
-getCommon[Edge](/docs/kcl/types/Edge)(faces: [[TagIdentifier](/docs/kcl/types#tag-identifier)]): Uuid
+```js
+getCommonEdge(faces: [TagIdentifier]): Uuid
 ```
 
 
@@ -26,7 +26,7 @@ getCommon[Edge](/docs/kcl/types/Edge)(faces: [[TagIdentifier](/docs/kcl/types#ta
 
 ### Examples
 
-```kcl
+```js
 // Get an edge shared between two faces, created after a chamfer.
 
 

docs/kcl/getNextAdjacentEdge.md

@@ -8,8 +8,8 @@ Get the next adjacent edge to the edge given.
 
 
 
-```kcl
-getNextAdjacent[Edge](/docs/kcl/types/Edge)(edge: [TagIdentifier](/docs/kcl/types#tag-identifier)): Uuid
+```js
+getNextAdjacentEdge(edge: TagIdentifier): Uuid
 ```
 
 
@@ -26,7 +26,7 @@ getNextAdjacent[Edge](/docs/kcl/types/Edge)(edge: [TagIdentifier](/docs/kcl/type
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [10, 0])

docs/kcl/getOppositeEdge.md

@@ -8,8 +8,8 @@ Get the opposite edge to the edge given.
 
 
 
-```kcl
-getOpposite[Edge](/docs/kcl/types/Edge)(edge: [TagIdentifier](/docs/kcl/types#tag-identifier)): Uuid
+```js
+getOppositeEdge(edge: TagIdentifier): Uuid
 ```
 
 
@@ -26,7 +26,7 @@ getOpposite[Edge](/docs/kcl/types/Edge)(edge: [TagIdentifier](/docs/kcl/types#ta
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [10, 0])

docs/kcl/getPreviousAdjacentEdge.md

@@ -8,8 +8,8 @@ Get the previous adjacent edge to the edge given.
 
 
 
-```kcl
-getPreviousAdjacent[Edge](/docs/kcl/types/Edge)(edge: [TagIdentifier](/docs/kcl/types#tag-identifier)): Uuid
+```js
+getPreviousAdjacentEdge(edge: TagIdentifier): Uuid
 ```
 
 
@@ -26,7 +26,7 @@ getPreviousAdjacent[Edge](/docs/kcl/types/Edge)(edge: [TagIdentifier](/docs/kcl/
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [10, 0])

docs/kcl/index.md

@@ -93,30 +93,30 @@ layout: manual
   * [`xLine`](kcl/xLine)
   * [`yLine`](kcl/yLine)
 * **std::math**
-  * [`E`](kcl/consts/std-math-E)
-  * [`PI`](kcl/consts/std-math-PI)
-  * [`TAU`](kcl/consts/std-math-TAU)
-  * [`abs`](kcl/std-math-abs)
-  * [`acos`](kcl/std-math-acos)
-  * [`asin`](kcl/std-math-asin)
-  * [`atan`](kcl/std-math-atan)
-  * [`atan2`](kcl/std-math-atan2)
-  * [`ceil`](kcl/std-math-ceil)
-  * [`cos`](kcl/std-math-cos)
-  * [`floor`](kcl/std-math-floor)
-  * [`ln`](kcl/std-math-ln)
-  * [`log`](kcl/std-math-log)
-  * [`log10`](kcl/std-math-log10)
-  * [`log2`](kcl/std-math-log2)
-  * [`max`](kcl/std-math-max)
-  * [`min`](kcl/std-math-min)
-  * [`polar`](kcl/std-math-polar)
-  * [`pow`](kcl/std-math-pow)
-  * [`rem`](kcl/std-math-rem)
-  * [`round`](kcl/std-math-round)
-  * [`sin`](kcl/std-math-sin)
-  * [`sqrt`](kcl/std-math-sqrt)
-  * [`tan`](kcl/std-math-tan)
+  * [`math::E`](kcl/consts/std-math-E)
+  * [`math::PI`](kcl/consts/std-math-PI)
+  * [`math::TAU`](kcl/consts/std-math-TAU)
+  * [`math::abs`](kcl/std-math-abs)
+  * [`math::acos`](kcl/std-math-acos)
+  * [`math::asin`](kcl/std-math-asin)
+  * [`math::atan`](kcl/std-math-atan)
+  * [`math::atan2`](kcl/std-math-atan2)
+  * [`math::ceil`](kcl/std-math-ceil)
+  * [`math::cos`](kcl/std-math-cos)
+  * [`math::floor`](kcl/std-math-floor)
+  * [`math::ln`](kcl/std-math-ln)
+  * [`math::log`](kcl/std-math-log)
+  * [`math::log10`](kcl/std-math-log10)
+  * [`math::log2`](kcl/std-math-log2)
+  * [`math::max`](kcl/std-math-max)
+  * [`math::min`](kcl/std-math-min)
+  * [`math::polar`](kcl/std-math-polar)
+  * [`math::pow`](kcl/std-math-pow)
+  * [`math::rem`](kcl/std-math-rem)
+  * [`math::round`](kcl/std-math-round)
+  * [`math::sin`](kcl/std-math-sin)
+  * [`math::sqrt`](kcl/std-math-sqrt)
+  * [`math::tan`](kcl/std-math-tan)
 * **std::sketch**
   * [`circle`](kcl/std-sketch-circle)
   * [`mirror2d`](kcl/std-sketch-mirror2d)

docs/kcl/involuteCircular.md

@@ -8,15 +8,15 @@ Extend the current sketch with a new involute circular curve.
 
 
 
-```kcl
+```js
 involuteCircular(
-  sketch: [Sketch](/docs/kcl/types/Sketch),
-  startRadius: [number](/docs/kcl/types/number),
-  endRadius: [number](/docs/kcl/types/number),
-  angle: [number](/docs/kcl/types/number),
-  reverse?: [bool](/docs/kcl/types/bool),
-  tag?: [TagDeclarator](/docs/kcl/types#tag-declaration),
-): [Sketch](/docs/kcl/types/Sketch)
+  sketch: Sketch,
+  startRadius: number,
+  endRadius: number,
+  angle: number,
+  reverse?: bool,
+  tag?: TagDeclarator,
+): Sketch
 ```
 
 
@@ -29,7 +29,7 @@ involuteCircular(
 | `endRadius` | [`number`](/docs/kcl/types/number) | The involute is described between two circles, end_radius is the radius of the outer circle. | Yes |
 | `angle` | [`number`](/docs/kcl/types/number) | The angle to rotate the involute by. A value of zero will produce a curve with a tangent along the x-axis at the start point of the curve. | Yes |
 | `reverse` | [`bool`](/docs/kcl/types/bool) | If reverse is true, the segment will start from the end of the involute, otherwise it will start from that start. Defaults to false. | No |
-| `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Create a new tag which refers to this line | No |
+| [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Create a new tag which refers to this line | No |
 
 ### Returns
 
@@ -38,7 +38,7 @@ involuteCircular(
 
 ### Examples
 
-```kcl
+```js
 a = 10
 b = 14
 startSketchOn(XZ)

docs/kcl/lastSegX.md

@@ -8,8 +8,8 @@ Extract the 'x' axis value of the last line segment in the provided 2-d sketch.
 
 
 
-```kcl
-lastSegX(sketch: [Sketch](/docs/kcl/types/Sketch)): [number](/docs/kcl/types/number)
+```js
+lastSegX(sketch: Sketch): number
 ```
 
 
@@ -26,7 +26,7 @@ lastSegX(sketch: [Sketch](/docs/kcl/types/Sketch)): [number](/docs/kcl/types/num
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [5, 0])

docs/kcl/lastSegY.md

@@ -8,8 +8,8 @@ Extract the 'y' axis value of the last line segment in the provided 2-d sketch.
 
 
 
-```kcl
-lastSegY(sketch: [Sketch](/docs/kcl/types/Sketch)): [number](/docs/kcl/types/number)
+```js
+lastSegY(sketch: Sketch): number
 ```
 
 
@@ -26,7 +26,7 @@ lastSegY(sketch: [Sketch](/docs/kcl/types/Sketch)): [number](/docs/kcl/types/num
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [5, 0])

docs/kcl/legAngX.md

@@ -8,11 +8,11 @@ Compute the angle of the given leg for x.
 
 
 
-```kcl
+```js
 legAngX(
-  hypotenuse: [number](/docs/kcl/types/number),
-  leg: [number](/docs/kcl/types/number),
-): [number](/docs/kcl/types/number)
+  hypotenuse: number,
+  leg: number,
+): number
 ```
 
 ### Tags
@@ -34,7 +34,7 @@ legAngX(
 
 ### Examples
 
-```kcl
+```js
 legAngX(hypotenuse = 5, leg = 3)
 ```
 

docs/kcl/legAngY.md

@@ -8,11 +8,11 @@ Compute the angle of the given leg for y.
 
 
 
-```kcl
+```js
 legAngY(
-  hypotenuse: [number](/docs/kcl/types/number),
-  leg: [number](/docs/kcl/types/number),
-): [number](/docs/kcl/types/number)
+  hypotenuse: number,
+  leg: number,
+): number
 ```
 
 ### Tags
@@ -34,7 +34,7 @@ legAngY(
 
 ### Examples
 
-```kcl
+```js
 legAngY(hypotenuse = 5, leg = 3)
 ```
 

docs/kcl/legLen.md

@@ -8,11 +8,11 @@ Compute the length of the given leg.
 
 
 
-```kcl
+```js
 legLen(
-  hypotenuse: [number](/docs/kcl/types/number),
-  leg: [number](/docs/kcl/types/number),
-): [number](/docs/kcl/types/number)
+  hypotenuse: number,
+  leg: number,
+): number
 ```
 
 ### Tags
@@ -34,7 +34,7 @@ legLen(
 
 ### Examples
 
-```kcl
+```js
 legLen(hypotenuse = 5, leg = 3)
 ```
 

docs/kcl/line.md

@@ -8,13 +8,13 @@ Extend the current sketch with a new straight line.
 
 
 
-```kcl
+```js
 line(
-  sketch: [Sketch](/docs/kcl/types/Sketch),
-  endAbsolute?: [[[number](/docs/kcl/types/number)]](/docs/kcl/types/[number](/docs/kcl/types/number)),
-  end?: [[[number](/docs/kcl/types/number)]](/docs/kcl/types/[number](/docs/kcl/types/number)),
-  tag?: [TagDeclarator](/docs/kcl/types#tag-declaration),
-): [Sketch](/docs/kcl/types/Sketch)
+  sketch: Sketch,
+  endAbsolute?: [number],
+  end?: [number],
+  tag?: TagDeclarator,
+): Sketch
 ```
 
 
@@ -25,7 +25,7 @@ line(
 | `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | Which sketch should this path be added to? | Yes |
 | `endAbsolute` | [`[number]`](/docs/kcl/types/number) | Which absolute point should this line go to? Incompatible with `end`. | No |
 | `end` | [`[number]`](/docs/kcl/types/number) | How far away (along the X and Y axes) should this line go? Incompatible with `endAbsolute`. | No |
-| `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Create a new tag which refers to this line | No |
+| [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Create a new tag which refers to this line | No |
 
 ### Returns
 
@@ -34,7 +34,7 @@ line(
 
 ### Examples
 
-```kcl
+```js
 triangle = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   // The END argument means it ends at exactly [10, 0].

docs/kcl/patternCircular2d.md

@@ -8,15 +8,15 @@ Repeat a 2-dimensional sketch some number of times along a partial or complete c
 
 
 
-```kcl
+```js
 patternCircular2d(
-  sketchSet: [[[Sketch](/docs/kcl/types/Sketch)]](/docs/kcl/types/[Sketch](/docs/kcl/types/Sketch)),
+  sketchSet: [Sketch],
   instances: integer,
-  center: [[[number](/docs/kcl/types/number)]](/docs/kcl/types/[number](/docs/kcl/types/number)),
-  arcDegrees: [number](/docs/kcl/types/number),
-  rotateDuplicates: [bool](/docs/kcl/types/bool),
-  useOriginal?: [bool](/docs/kcl/types/bool),
-): [[[Sketch](/docs/kcl/types/Sketch)]](/docs/kcl/types/[Sketch](/docs/kcl/types/Sketch))
+  center: [number],
+  arcDegrees: number,
+  rotateDuplicates: bool,
+  useOriginal?: bool,
+): [Sketch]
 ```
 
 
@@ -38,7 +38,7 @@ patternCircular2d(
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [.5, 25])
   |> line(end = [0, 5])

docs/kcl/patternCircular3d.md

@@ -8,16 +8,16 @@ Repeat a 3-dimensional solid some number of times along a partial or complete ci
 
 
 
-```kcl
+```js
 patternCircular3d(
-  solids: [[[Solid](/docs/kcl/types/Solid)]](/docs/kcl/types/[Solid](/docs/kcl/types/Solid)),
+  solids: [Solid],
   instances: integer,
-  axis: [[[number](/docs/kcl/types/number)]](/docs/kcl/types/[number](/docs/kcl/types/number)),
-  center: [[[number](/docs/kcl/types/number)]](/docs/kcl/types/[number](/docs/kcl/types/number)),
-  arcDegrees: [number](/docs/kcl/types/number),
-  rotateDuplicates: [bool](/docs/kcl/types/bool),
-  useOriginal?: [bool](/docs/kcl/types/bool),
-): [[[Solid](/docs/kcl/types/Solid)]](/docs/kcl/types/[Solid](/docs/kcl/types/Solid))
+  axis: [number],
+  center: [number],
+  arcDegrees: number,
+  rotateDuplicates: bool,
+  useOriginal?: bool,
+): [Solid]
 ```
 
 
@@ -40,7 +40,7 @@ patternCircular3d(
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> circle(center = [0, 0], radius = 1)
 

docs/kcl/patternLinear2d.md

@@ -8,14 +8,14 @@ Repeat a 2-dimensional sketch along some dimension, with a dynamic amount of dis
 
 
 
-```kcl
+```js
 patternLinear2d(
-  sketches: [[[Sketch](/docs/kcl/types/Sketch)]](/docs/kcl/types/[Sketch](/docs/kcl/types/Sketch)),
+  sketches: [Sketch],
   instances: integer,
-  distance: [number](/docs/kcl/types/number),
-  axis: [[[number](/docs/kcl/types/number)]](/docs/kcl/types/[number](/docs/kcl/types/number)),
-  useOriginal?: [bool](/docs/kcl/types/bool),
-): [[[Sketch](/docs/kcl/types/Sketch)]](/docs/kcl/types/[Sketch](/docs/kcl/types/Sketch))
+  distance: number,
+  axis: [number],
+  useOriginal?: bool,
+): [Sketch]
 ```
 
 
@@ -36,7 +36,7 @@ patternLinear2d(
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> circle(center = [0, 0], radius = 1)
   |> patternLinear2d(axis = [1, 0], instances = 7, distance = 4)

docs/kcl/patternTransform2d.md

@@ -8,13 +8,13 @@ Just like patternTransform, but works on 2D sketches not 3D solids.
 
 
 
-```kcl
+```js
 patternTransform2d(
-  sketches: [[[Sketch](/docs/kcl/types/Sketch)]](/docs/kcl/types/[Sketch](/docs/kcl/types/Sketch)),
+  sketches: [Sketch],
   instances: integer,
   transform: FunctionSource,
-  useOriginal?: [bool](/docs/kcl/types/bool),
-): [[[Sketch](/docs/kcl/types/Sketch)]](/docs/kcl/types/[Sketch](/docs/kcl/types/Sketch))
+  useOriginal?: bool,
+): [Sketch]
 ```
 
 
@@ -34,7 +34,7 @@ patternTransform2d(
 
 ### Examples
 
-```kcl
+```js
 // Each instance will be shifted along the X axis.
 fn transform(id) {
   return { translate = [4 * id, 0] }

docs/kcl/pop.md

@@ -8,8 +8,8 @@ Remove the last element from an array.
 
 Returns a new array with the last element removed.
 
-```kcl
-pop(array: [[[KclValue](/docs/kcl/types/KclValue)]](/docs/kcl/types/[KclValue](/docs/kcl/types/KclValue))): [KclValue](/docs/kcl/types/KclValue)
+```js
+pop(array: [KclValue]): KclValue
 ```
 
 
@@ -26,7 +26,7 @@ pop(array: [[[KclValue](/docs/kcl/types/KclValue)]](/docs/kcl/types/[KclValue](/
 
 ### Examples
 
-```kcl
+```js
 arr = [1, 2, 3, 4]
 new_arr = pop(arr)
 assert(

docs/kcl/profileStart.md

@@ -8,8 +8,8 @@ Extract the provided 2-dimensional sketch's profile's origin value.
 
 
 
-```kcl
-profileStart(profile: [Sketch](/docs/kcl/types/Sketch)): [[[number](/docs/kcl/types/number)]](/docs/kcl/types/[number](/docs/kcl/types/number))
+```js
+profileStart(profile: Sketch): [number]
 ```
 
 
@@ -26,7 +26,7 @@ profileStart(profile: [Sketch](/docs/kcl/types/Sketch)): [[[number](/docs/kcl/ty
 
 ### Examples
 
-```kcl
+```js
 sketch001 = startSketchOn(XY)
   |> startProfile(at = [5, 2])
   |> angledLine(angle = 120, length = 50, tag = $seg01)

docs/kcl/profileStartX.md

@@ -8,8 +8,8 @@ Extract the provided 2-dimensional sketch's profile's origin's 'x' value.
 
 
 
-```kcl
-profileStartX(profile: [Sketch](/docs/kcl/types/Sketch)): [number](/docs/kcl/types/number)
+```js
+profileStartX(profile: Sketch): number
 ```
 
 
@@ -26,7 +26,7 @@ profileStartX(profile: [Sketch](/docs/kcl/types/Sketch)): [number](/docs/kcl/typ
 
 ### Examples
 
-```kcl
+```js
 sketch001 = startSketchOn(XY)
   |> startProfile(at = [5, 2])
   |> angledLine(angle = -26.6, length = 50)

docs/kcl/profileStartY.md

@@ -8,8 +8,8 @@ Extract the provided 2-dimensional sketch's profile's origin's 'y' value.
 
 
 
-```kcl
-profileStartY(profile: [Sketch](/docs/kcl/types/Sketch)): [number](/docs/kcl/types/number)
+```js
+profileStartY(profile: Sketch): number
 ```
 
 
@@ -26,7 +26,7 @@ profileStartY(profile: [Sketch](/docs/kcl/types/Sketch)): [number](/docs/kcl/typ
 
 ### Examples
 
-```kcl
+```js
 sketch001 = startSketchOn(XY)
   |> startProfile(at = [5, 2])
   |> angledLine(angle = -60, length = 14)

docs/kcl/push.md

@@ -8,11 +8,11 @@ Append an element to the end of an array.
 
 Returns a new array with the element appended.
 
-```kcl
+```js
 push(
-  array: [[[KclValue](/docs/kcl/types/KclValue)]](/docs/kcl/types/[KclValue](/docs/kcl/types/KclValue)),
-  item: [KclValue](/docs/kcl/types/KclValue),
-): [KclValue](/docs/kcl/types/KclValue)
+  array: [KclValue],
+  item: KclValue,
+): KclValue
 ```
 
 
@@ -30,7 +30,7 @@ push(
 
 ### Examples
 
-```kcl
+```js
 arr = [1, 2, 3]
 new_arr = push(arr, item = 4)
 assert(

docs/kcl/segAng.md

@@ -8,8 +8,8 @@ Compute the angle (in degrees) of the provided line segment.
 
 
 
-```kcl
-segAng(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [number](/docs/kcl/types/number)
+```js
+segAng(tag: TagIdentifier): number
 ```
 
 
@@ -17,7 +17,7 @@ segAng(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [number](/docs/kcl
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
+| [`tag`](/docs/kcl/types/tag) | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
 
 ### Returns
 
@@ -26,7 +26,7 @@ segAng(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [number](/docs/kcl
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [10, 0])

docs/kcl/segEnd.md

@@ -8,8 +8,8 @@ Compute the ending point of the provided line segment.
 
 
 
-```kcl
-segEnd(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [[[number](/docs/kcl/types/number)]](/docs/kcl/types/[number](/docs/kcl/types/number))
+```js
+segEnd(tag: TagIdentifier): [number]
 ```
 
 
@@ -17,7 +17,7 @@ segEnd(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [[[number](/docs/k
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
+| [`tag`](/docs/kcl/types/tag) | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
 
 ### Returns
 
@@ -26,7 +26,7 @@ segEnd(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [[[number](/docs/k
 
 ### Examples
 
-```kcl
+```js
 w = 15
 cube = startSketchOn(XY)
   |> startProfile(at = [0, 0])

docs/kcl/segEndX.md

@@ -8,8 +8,8 @@ Compute the ending point of the provided line segment along the 'x' axis.
 
 
 
-```kcl
-segEndX(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [number](/docs/kcl/types/number)
+```js
+segEndX(tag: TagIdentifier): number
 ```
 
 
@@ -17,7 +17,7 @@ segEndX(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [number](/docs/kc
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
+| [`tag`](/docs/kcl/types/tag) | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
 
 ### Returns
 
@@ -26,7 +26,7 @@ segEndX(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [number](/docs/kc
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [20, 0], tag = $thing)

docs/kcl/segEndY.md

@@ -8,8 +8,8 @@ Compute the ending point of the provided line segment along the 'y' axis.
 
 
 
-```kcl
-segEndY(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [number](/docs/kcl/types/number)
+```js
+segEndY(tag: TagIdentifier): number
 ```
 
 
@@ -17,7 +17,7 @@ segEndY(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [number](/docs/kc
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
+| [`tag`](/docs/kcl/types/tag) | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
 
 ### Returns
 
@@ -26,7 +26,7 @@ segEndY(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [number](/docs/kc
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [20, 0])

docs/kcl/segLen.md

@@ -8,8 +8,8 @@ Compute the length of the provided line segment.
 
 
 
-```kcl
-segLen(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [number](/docs/kcl/types/number)
+```js
+segLen(tag: TagIdentifier): number
 ```
 
 
@@ -17,7 +17,7 @@ segLen(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [number](/docs/kcl
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
+| [`tag`](/docs/kcl/types/tag) | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
 
 ### Returns
 
@@ -26,7 +26,7 @@ segLen(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [number](/docs/kcl
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(angle = 60, length = 10, tag = $thing)

docs/kcl/segStart.md

@@ -8,8 +8,8 @@ Compute the starting point of the provided line segment.
 
 
 
-```kcl
-segStart(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [[[number](/docs/kcl/types/number)]](/docs/kcl/types/[number](/docs/kcl/types/number))
+```js
+segStart(tag: TagIdentifier): [number]
 ```
 
 
@@ -17,7 +17,7 @@ segStart(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [[[number](/docs
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
+| [`tag`](/docs/kcl/types/tag) | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
 
 ### Returns
 
@@ -26,7 +26,7 @@ segStart(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [[[number](/docs
 
 ### Examples
 
-```kcl
+```js
 w = 15
 cube = startSketchOn(XY)
   |> startProfile(at = [0, 0])

docs/kcl/segStartX.md

@@ -8,8 +8,8 @@ Compute the starting point of the provided line segment along the 'x' axis.
 
 
 
-```kcl
-segStartX(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [number](/docs/kcl/types/number)
+```js
+segStartX(tag: TagIdentifier): number
 ```
 
 
@@ -17,7 +17,7 @@ segStartX(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [number](/docs/
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
+| [`tag`](/docs/kcl/types/tag) | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
 
 ### Returns
 
@@ -26,7 +26,7 @@ segStartX(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [number](/docs/
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [20, 0], tag = $thing)

docs/kcl/segStartY.md

@@ -8,8 +8,8 @@ Compute the starting point of the provided line segment along the 'y' axis.
 
 
 
-```kcl
-segStartY(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [number](/docs/kcl/types/number)
+```js
+segStartY(tag: TagIdentifier): number
 ```
 
 
@@ -17,7 +17,7 @@ segStartY(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [number](/docs/
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
+| [`tag`](/docs/kcl/types/tag) | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
 
 ### Returns
 
@@ -26,7 +26,7 @@ segStartY(tag: [TagIdentifier](/docs/kcl/types#tag-identifier)): [number](/docs/
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [20, 0])

docs/kcl/std-math-abs.md

@@ -8,8 +8,8 @@ Compute the absolute value of a number.
 
 
 
-```kcl
-abs(@input: [number](/docs/kcl/types/number)): [number](/docs/kcl/types/number)
+```js
+abs(@input: number): number
 ```
 
 
@@ -26,14 +26,14 @@ abs(@input: [number](/docs/kcl/types/number)): [number](/docs/kcl/types/number)
 
 ### Examples
 
-```kcl
+```js
 myAngle = -120
 
 sketch001 = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(end = [8, 0])
   |> angledLine(
-    angle = abs(myAngle),
+    angle = math::abs(myAngle),
     length = 5,
   )
   |> line(end = [-5, 0])

docs/kcl/std-math-acos.md

@@ -8,8 +8,8 @@ Compute the arccosine of a number.
 
 
 
-```kcl
-acos(@num: [number](/docs/kcl/types/number)(_)): [number](/docs/kcl/types/number)(rad)
+```js
+acos(@num: number(_)): number(rad)
 ```
 
 
@@ -26,11 +26,11 @@ acos(@num: [number](/docs/kcl/types/number)(_)): [number](/docs/kcl/types/number
 
 ### Examples
 
-```kcl
+```js
 sketch001 = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = acos(0.5),
+    angle = math::acos(0.5),
     length = 10,
   )
   |> line(end = [5, 0])

docs/kcl/std-math-asin.md

@@ -8,8 +8,8 @@ Compute the arcsine of a number.
 
 
 
-```kcl
-asin(@num: [number](/docs/kcl/types/number)(_)): [number](/docs/kcl/types/number)(rad)
+```js
+asin(@num: number(_)): number(rad)
 ```
 
 
@@ -26,11 +26,11 @@ asin(@num: [number](/docs/kcl/types/number)(_)): [number](/docs/kcl/types/number
 
 ### Examples
 
-```kcl
+```js
 sketch001 = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = asin(0.5),
+    angle = math::asin(0.5),
     length = 20,
   )
   |> yLine(endAbsolute = 0)

docs/kcl/std-math-atan.md

@@ -8,8 +8,8 @@ Compute the arctangent of a number.
 
 Consider using `atan2()` instead for the true inverse of tangent.
 
-```kcl
-atan(@num: [number](/docs/kcl/types/number)(_)): [number](/docs/kcl/types/number)(rad)
+```js
+atan(@num: number(_)): number(rad)
 ```
 
 
@@ -26,11 +26,11 @@ atan(@num: [number](/docs/kcl/types/number)(_)): [number](/docs/kcl/types/number
 
 ### Examples
 
-```kcl
+```js
 sketch001 = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = atan(1.25),
+    angle = math::atan(1.25),
     length = 20,
   )
   |> yLine(endAbsolute = 0)

docs/kcl/std-math-atan2.md

@@ -8,11 +8,11 @@ Compute the four quadrant arctangent of Y and X.
 
 
 
-```kcl
+```js
 atan2(
-  y: [number](/docs/kcl/types/number)(Length),
-  x: [number](/docs/kcl/types/number)(Length),
-): [number](/docs/kcl/types/number)(rad)
+  y: number(Length),
+  x: number(Length),
+): number(rad)
 ```
 
 
@@ -30,11 +30,11 @@ atan2(
 
 ### Examples
 
-```kcl
+```js
 sketch001 = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
-    angle = atan2(y = 1.25, x = 2),
+    angle = math::atan2(y = 1.25, x = 2),
     length = 20,
   )
   |> yLine(endAbsolute = 0)

docs/kcl/std-math-ceil.md

@@ -8,8 +8,8 @@ Compute the smallest integer greater than or equal to a number.
 
 
 
-```kcl
-ceil(@input: [number](/docs/kcl/types/number)): [number](/docs/kcl/types/number)
+```js
+ceil(@input: number): number
 ```
 
 
@@ -26,11 +26,11 @@ ceil(@input: [number](/docs/kcl/types/number)): [number](/docs/kcl/types/number)
 
 ### Examples
 
-```kcl
+```js
 sketch001 = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> line(endAbsolute = [12, 10])
-  |> line(end = [ceil(7.02986), 0])
+  |> line(end = [math::ceil(7.02986), 0])
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/std-math-cos.md

@@ -8,8 +8,8 @@ Compute the cosine of a number.
 
 
 
-```kcl
-cos(@num: [number](/docs/kcl/types/number)(Angle)): [number](/docs/kcl/types/number)(_)
+```js
+cos(@num: number(Angle)): number(_)
 ```
 
 
@@ -26,12 +26,12 @@ cos(@num: [number](/docs/kcl/types/number)(Angle)): [number](/docs/kcl/types/num
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
     angle = 30,
-    length = 3 / cos(30deg),
+    length = 3 / math::cos(30deg),
   )
   |> yLine(endAbsolute = 0)
   |> close()

docs/kcl/std-math-floor.md

@@ -8,8 +8,8 @@ Compute the largest integer less than or equal to a number.
 
 
 
-```kcl
-floor(@input: [number](/docs/kcl/types/number)): [number](/docs/kcl/types/number)
+```js
+floor(@input: number): number
 ```
 
 
@@ -26,11 +26,11 @@ floor(@input: [number](/docs/kcl/types/number)): [number](/docs/kcl/types/number
 
 ### Examples
 
-```kcl
+```js
 sketch001 = startSketchOn(XZ)
    |> startProfile(at = [0, 0])
    |> line(endAbsolute = [12, 10])
-   |> line(end = [floor(7.02986), 0])
+   |> line(end = [math::floor(7.02986), 0])
    |> yLine(endAbsolute = 0)
    |> close()
 

docs/kcl/std-math-ln.md

@@ -8,8 +8,8 @@ Compute the natural logarithm of the number.
 
 
 
-```kcl
-ln(@input: [number](/docs/kcl/types/number)): [number](/docs/kcl/types/number)
+```js
+ln(@input: number): number
 ```
 
 
@@ -26,10 +26,10 @@ ln(@input: [number](/docs/kcl/types/number)): [number](/docs/kcl/types/number)
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> line(end = [ln(100), 15])
+  |> line(end = [math::ln(100), 15])
   |> line(end = [5, -6])
   |> line(end = [-10, -10])
   |> close()

docs/kcl/std-math-log.md

@@ -7,14 +7,14 @@ layout: manual
 Compute the logarithm of the number with respect to an arbitrary base.
 
 The result might not be correctly rounded owing to implementation
-details; `log2` can produce more accurate results for base 2,
-and `log10` can produce more accurate results for base 10.
+details; `math::log2` can produce more accurate results for base 2,
+and `math::log10` can produce more accurate results for base 10.
 
-```kcl
+```js
 log(
-  @input: [number](/docs/kcl/types/number),
-  base: [number](/docs/kcl/types/number)(_),
-): [number](/docs/kcl/types/number)
+  @input: number,
+  base: number(_),
+): number
 ```
 
 
@@ -32,10 +32,10 @@ log(
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> line(end = [log(100, base = 5), 0])
+  |> line(end = [math::log(100, base = 5), 0])
   |> line(end = [5, 8])
   |> line(end = [-10, 0])
   |> close()

docs/kcl/std-math-log10.md

@@ -8,8 +8,8 @@ Compute the base 10 logarithm of the number.
 
 
 
-```kcl
-log10(@input: [number](/docs/kcl/types/number)): [number](/docs/kcl/types/number)
+```js
+log10(@input: number): number
 ```
 
 
@@ -26,10 +26,10 @@ log10(@input: [number](/docs/kcl/types/number)): [number](/docs/kcl/types/number
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> line(end = [log10(100), 0])
+  |> line(end = [math::log10(100), 0])
   |> line(end = [5, 8])
   |> line(end = [-10, 0])
   |> close()

docs/kcl/std-math-log2.md

@@ -8,8 +8,8 @@ Compute the base 2 logarithm of the number.
 
 
 
-```kcl
-log2(@input: [number](/docs/kcl/types/number)): [number](/docs/kcl/types/number)
+```js
+log2(@input: number): number
 ```
 
 
@@ -26,10 +26,10 @@ log2(@input: [number](/docs/kcl/types/number)): [number](/docs/kcl/types/number)
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> line(end = [log2(100), 0])
+  |> line(end = [math::log2(100), 0])
   |> line(end = [5, 8])
   |> line(end = [-10, 0])
   |> close()

docs/kcl/std-math-max.md

@@ -8,8 +8,8 @@ Compute the maximum of the given arguments.
 
 
 
-```kcl
-max(@input: [[number](/docs/kcl/types/number); 1+]): [number](/docs/kcl/types/number)
+```js
+max(@input: [number; 1+]): number
 ```
 
 
@@ -26,12 +26,12 @@ max(@input: [[number](/docs/kcl/types/number); 1+]): [number](/docs/kcl/types/nu
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
     angle = 70,
-    length = max([15, 31, 4, 13, 22])
+    length = math::max([15, 31, 4, 13, 22])
   )
   |> line(end = [20, 0])
   |> close()

docs/kcl/std-math-min.md

@@ -8,8 +8,8 @@ Compute the minimum of the given arguments.
 
 
 
-```kcl
-min(@input: [[number](/docs/kcl/types/number); 1+]): [number](/docs/kcl/types/number)
+```js
+min(@input: [number; 1+]): number
 ```
 
 
@@ -26,12 +26,12 @@ min(@input: [[number](/docs/kcl/types/number); 1+]): [number](/docs/kcl/types/nu
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
     angle = 70,
-    length = min([15, 31, 4, 13, 22])
+    length = math::min([15, 31, 4, 13, 22])
   )
   |> line(end = [20, 0])
   |> close()

docs/kcl/std-math-polar.md

@@ -9,11 +9,11 @@ layout: manual
 Convert polar/sphere (azimuth, elevation, distance) coordinates to
 cartesian (x/y/z grid) coordinates.
 
-```kcl
+```js
 polar(
-  angle: [number](/docs/kcl/types/number)(rad),
-  length: [number](/docs/kcl/types/number)(Length),
-): [Point2d](/docs/kcl/types/Point2d)
+  angle: number(rad),
+  length: number(Length),
+): Point2d
 ```
 
 
@@ -31,10 +31,10 @@ polar(
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> line(end = polar(angle = 30, length = 5), tag = $thing)
+  |> line(end = math::polar(angle = 30, length = 5), tag = $thing)
   |> line(end = [0, 5])
   |> line(end = [segEndX(thing), 0])
   |> line(end = [-20, 10])

docs/kcl/std-math-pow.md

@@ -8,11 +8,11 @@ Compute the number to a power.
 
 
 
-```kcl
+```js
 pow(
-  @input: [number](/docs/kcl/types/number),
-  exp: [number](/docs/kcl/types/number)(_),
-): [number](/docs/kcl/types/number)
+  @input: number,
+  exp: number(_),
+): number
 ```
 
 
@@ -30,12 +30,12 @@ pow(
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
     angle = 50,
-    length = pow(5, exp = 2),
+    length = math::pow(5, exp = 2),
   )
   |> yLine(endAbsolute = 0)
   |> close()

docs/kcl/std-math-rem.md

@@ -9,11 +9,11 @@ layout: manual
 Compute the remainder after dividing `num` by `div`.
 If `num` is negative, the result will be too.
 
-```kcl
+```js
 rem(
-  @num: [number](/docs/kcl/types/number),
-  divisor: [number](/docs/kcl/types/number),
-): [number](/docs/kcl/types/number)
+  @num: number,
+  divisor: number,
+): number
 ```
 
 
@@ -31,7 +31,7 @@ rem(
 
 ### Examples
 
-```kcl
+```js
 import rem from "std::math"
 
 assert(rem( 7,    divisor =   4), isEqualTo =   3, error = "remainder is 3")

docs/kcl/std-math-round.md

@@ -8,8 +8,8 @@ Round a number to the nearest integer.
 
 
 
-```kcl
-round(@input: [number](/docs/kcl/types/number)): [number](/docs/kcl/types/number)
+```js
+round(@input: number): number
 ```
 
 
@@ -26,11 +26,11 @@ round(@input: [number](/docs/kcl/types/number)): [number](/docs/kcl/types/number
 
 ### Examples
 
-```kcl
+```js
 sketch001 = startSketchOn(XZ)
    |> startProfile(at = [0, 0])
    |> line(endAbsolute = [12, 10])
-   |> line(end = [round(7.02986), 0])
+   |> line(end = [math::round(7.02986), 0])
    |> yLine(endAbsolute = 0)
    |> close()
 

docs/kcl/std-math-sin.md

@@ -8,8 +8,8 @@ Compute the sine of a number.
 
 
 
-```kcl
-sin(@num: [number](/docs/kcl/types/number)(Angle)): [number](/docs/kcl/types/number)(_)
+```js
+sin(@num: number(Angle)): number(_)
 ```
 
 
@@ -26,12 +26,12 @@ sin(@num: [number](/docs/kcl/types/number)(Angle)): [number](/docs/kcl/types/num
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
     angle = 50,
-    length = 15 / sin(135deg),
+    length = 15 / math::sin(135deg),
   )
   |> yLine(endAbsolute = 0)
   |> close()

docs/kcl/std-math-sqrt.md

@@ -8,8 +8,8 @@ Compute the square root of a number.
 
 
 
-```kcl
-sqrt(@input: [number](/docs/kcl/types/number)): [number](/docs/kcl/types/number)
+```js
+sqrt(@input: number): number
 ```
 
 
@@ -26,7 +26,7 @@ sqrt(@input: [number](/docs/kcl/types/number)): [number](/docs/kcl/types/number)
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(

docs/kcl/std-math-tan.md

@@ -8,8 +8,8 @@ Compute the tangent of a number.
 
 
 
-```kcl
-tan(@num: [number](/docs/kcl/types/number)(Angle)): [number](/docs/kcl/types/number)(_)
+```js
+tan(@num: number(Angle)): number(_)
 ```
 
 
@@ -26,12 +26,12 @@ tan(@num: [number](/docs/kcl/types/number)(Angle)): [number](/docs/kcl/types/num
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
     angle = 50,
-    length = 50 * tan((1/2): number(rad)),
+    length = 50 * math::tan((1/2): number(rad)),
   )
   |> yLine(endAbsolute = 0)
   |> close()

docs/kcl/std-units-toCentimeters.md

@@ -8,8 +8,8 @@ Convert a number to centimeters from its current units.
 
 
 
-```kcl
-units::toCentimeters(@num: [number](/docs/kcl/types/number)(cm)): [number](/docs/kcl/types/number)(cm)
+```js
+toCentimeters(@num: number(cm)): number(cm)
 ```
 
 

docs/kcl/std-units-toDegrees.md

@@ -8,8 +8,8 @@ Converts a number to degrees from its current units.
 
 
 
-```kcl
-units::toDegrees(@num: [number](/docs/kcl/types/number)(deg)): [number](/docs/kcl/types/number)(deg)
+```js
+toDegrees(@num: number(deg)): number(deg)
 ```
 
 
@@ -26,12 +26,12 @@ units::toDegrees(@num: [number](/docs/kcl/types/number)(deg)): [number](/docs/kc
 
 ### Examples
 
-```kcl
+```js
 exampleSketch = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
   |> angledLine(
     angle = 50,
-    length = 70 * cos(units::toDegrees((PI/4): number(rad))),
+    length = 70 * math::cos(units::toDegrees((PI/4): number(rad))),
   )
   |> yLine(endAbsolute = 0)
   |> close()

docs/kcl/std-units-toFeet.md

@@ -8,8 +8,8 @@ Convert a number to feet from its current units.
 
 
 
-```kcl
-units::toFeet(@num: [number](/docs/kcl/types/number)(ft)): [number](/docs/kcl/types/number)(ft)
+```js
+toFeet(@num: number(ft)): number(ft)
 ```
 
 

docs/kcl/std-units-toInches.md

@@ -8,8 +8,8 @@ Convert a number to inches from its current units.
 
 
 
-```kcl
-units::toInches(@num: [number](/docs/kcl/types/number)(in)): [number](/docs/kcl/types/number)(in)
+```js
+toInches(@num: number(in)): number(in)
 ```