Cut release v0.20.1 (#2292)

bump jsons

Signed-off-by: Jess Frazelle <github@jessfraz.com>

.env.development

@@ -3,3 +3,4 @@ VITE_KC_API_BASE_URL=https://api.dev.zoo.dev
 VITE_KC_SITE_BASE_URL=https://dev.zoo.dev
 VITE_KC_SKIP_AUTH=false
 VITE_KC_CONNECTION_TIMEOUT_MS=5000
+VITE_KC_DEV_TOKEN="your token from dev.zoo.dev should go in .env.development.local"

.github/workflows/build-and-store-wasm.yml

@@ -0,0 +1,33 @@
+name: Build and Store WASM
+
+on:
+  push:
+    branches:
+      - main
+
+jobs:
+  build-and-upload:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - uses: actions/setup-node@v4
+        with:
+          node-version-file: '.nvmrc'
+          cache: 'yarn'
+      - name: Install dependencies
+        run: yarn
+      - name: Setup Rust
+        uses: dtolnay/rust-toolchain@stable
+      - name: Cache wasm
+        uses: Swatinem/rust-cache@v2
+        with:
+          workspaces: './src/wasm-lib'
+      - name: build wasm
+        run: yarn build:wasm
+
+
+      # Upload the WASM bundle as an artifact
+      - uses: actions/upload-artifact@v3
+        with:
+          name: wasm-bundle
+          path: src/wasm-lib/pkg

.github/workflows/cargo-clippy.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-latest
     strategy:
       matrix:
-        dir: ['src/wasm-lib']
+        dir: ['src/wasm-lib', 'src-tauri']
     steps:
       - uses: actions/checkout@v4
       - name: Install latest rust
@@ -31,9 +31,22 @@ jobs:
 
       - name: install dependencies
         if: matrix.dir ==  'src-tauri'
+        shell: bash
         run: |
           sudo apt-get update
-          sudo apt-get install -y libgtk-3-dev libwebkit2gtk-4.0-dev libappindicator3-dev librsvg2-dev patchelf
+          sudo apt-get install -y \
+            libgtk-3-dev \
+            libayatana-appindicator3-dev \
+            webkit2gtk-driver \
+            libsoup-3.0-dev \
+            libjavascriptcoregtk-4.1-dev \
+            libwebkit2gtk-4.1-dev \
+            at-spi2-core \
+            xvfb
+          yarn install
+          yarn build:wasm
+          yarn build:local
+
       - name: Rust Cache
         uses: Swatinem/rust-cache@v2.6.1
 

.github/workflows/cargo-test-tauri.yml

@@ -0,0 +1,57 @@
+on:
+  push:
+    branches:
+      - main
+    paths:
+      - 'src-tauri/**.rs'
+      - '**/Cargo.toml'
+      - '**/Cargo.lock'
+      - '**/rust-toolchain.toml'
+      - .github/workflows/cargo-test-tauri.yml
+  pull_request:
+    paths:
+      - 'src-tauri/**.rs'
+      - '**/Cargo.toml'
+      - '**/Cargo.lock'
+      - '**/rust-toolchain.toml'
+      - .github/workflows/cargo-test-tauri.yml
+  workflow_dispatch:
+permissions: read-all
+concurrency:
+  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
+name: cargo test of tauri
+jobs:
+  cargotest:
+    name: cargo test
+    runs-on: ubuntu-latest-8-cores
+    strategy:
+      matrix:
+        dir: ['src-tauri']
+    steps:
+      - uses: actions/checkout@v4
+      - name: Install latest rust
+        uses: actions-rs/toolchain@v1
+        with:
+          toolchain: stable
+          override: true
+      - name: install dependencies
+        if: matrix.dir ==  'src-tauri'
+        run: |
+          sudo apt-get update
+          sudo apt-get install -y \
+            libgtk-3-dev \
+            libayatana-appindicator3-dev \
+            webkit2gtk-driver \
+            libsoup-3.0-dev \
+            libjavascriptcoregtk-4.1-dev \
+            libwebkit2gtk-4.1-dev \
+            at-spi2-core \
+            xvfb
+      - name: Rust Cache
+        uses: Swatinem/rust-cache@v2.6.1
+      - name: cargo test
+        shell: bash
+        run: |-
+          cd "${{ matrix.dir }}"
+          cargo test --all

.github/workflows/ci.yml

@@ -13,7 +13,7 @@ on:
   # Will checkout the last commit from the default branch (main as of 2023-10-04)
 
 env:
-  BUILD_RELEASE: ${{ github.event_name == 'release' || github.event_name == 'schedule' || github.event_name == 'pull_request' && contains(github.event.pull_request.title, 'Cut release v') }}
+  BUILD_RELEASE: ${{ github.event_name == 'release' || github.event_name == 'schedule' || github.event_name == 'pull_request' && (contains(github.event.pull_request.title, 'Cut release v')) }}
 
 concurrency:
   group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
@@ -130,7 +130,9 @@ jobs:
       matrix:
         os: [macos-14, ubuntu-latest, windows-latest]
     env:
+      # Specific Apple Universal target for macos
       TAURI_ARGS_MACOS: ${{ matrix.os == 'macos-14' && '--target universal-apple-darwin' || '' }}
+      # Only build executable on linux (no appimage or deb)
       TAURI_ARGS_UBUNTU: ${{ matrix.os == 'ubuntu-latest' && '--bundles' || '' }}
     steps:
       - uses: actions/checkout@v4
@@ -147,17 +149,17 @@ jobs:
 
       - name: Install ubuntu system dependencies
         if: matrix.os == 'ubuntu-latest'
-        run: >
-          sudo apt-get update &&
-          sudo apt-get install -y
-          libgtk-3-dev
-          libayatana-appindicator3-dev
-          webkit2gtk-driver
-          libsoup-3.0-dev
-          libjavascriptcoregtk-4.1-dev
-          libwebkit2gtk-4.1-dev
-          at-spi2-core
-          xvfb
+        run: |
+          sudo apt-get update
+          sudo apt-get install -y \
+            libgtk-3-dev \
+            libayatana-appindicator3-dev \
+            webkit2gtk-driver \
+            libsoup-3.0-dev \
+            libjavascriptcoregtk-4.1-dev \
+            libwebkit2gtk-4.1-dev \
+            at-spi2-core \
+            xvfb
 
       - name: Sync node version and setup cache
         uses: actions/setup-node@v4
@@ -237,6 +239,96 @@ jobs:
           includeDebug: true
           args: "${{ env.TAURI_ARGS_MACOS }} ${{ env.TAURI_ARGS_UBUNTU }}"
 
+      - name: Mac App Store
+        if: ${{ env.BUILD_RELEASE == 'true' && matrix.os == 'macos-14' }}
+        shell: bash
+        run: |
+          unset APPLE_SIGNING_IDENTITY
+          unset APPLE_CERTIFICATE
+          sign_app="3rd Party Mac Developer Application: KittyCAD Inc (${APPLE_TEAM_ID})"
+          sign_install="3rd Party Mac Developer Installer: KittyCAD Inc (${APPLE_TEAM_ID})"
+          profile="src-tauri/entitlements/Mac_App_Distribution.provisionprofile"
+
+          mkdir -p src-tauri/entitlements
+          echo -n "${APPLE_STORE_PROVISIONING_PROFILE}" | base64 --decode -o "${profile}"
+
+          echo -n "${APPLE_STORE_DISTRIBUTION_CERT}" | base64 --decode -o "dist.cer"
+          echo -n "${APPLE_STORE_INSTALLER_CERT}" | base64 --decode -o "installer.cer"
+
+          KEYCHAIN_PATH=$RUNNER_TEMP/app-signing.keychain-db
+          KEYCHAIN_PASSWORD="password"
+
+          # create temporary keychain
+          security create-keychain -p "$KEYCHAIN_PASSWORD" $KEYCHAIN_PATH
+          security set-keychain-settings -lut 21600 $KEYCHAIN_PATH
+          security unlock-keychain -p "$KEYCHAIN_PASSWORD" $KEYCHAIN_PATH
+
+          # import certificate to keychain
+          security import "dist.cer" -P "$APPLE_STORE_P12_PASSWORD" -k $KEYCHAIN_PATH -f pkcs12 -t cert -A
+          security import "installer.cer" -P "$APPLE_STORE_P12_PASSWORD" -k $KEYCHAIN_PATH -f pkcs12 -t cert -A
+
+          security set-key-partition-list -S apple-tool:,apple: -k "$KEYCHAIN_PASSWORD" $KEYCHAIN_PATH
+          security list-keychain -d user -s $KEYCHAIN_PATH
+
+          target="universal-apple-darwin"
+
+          # Turn off the default target
+          # We don't want to install the updater for the apple store build
+          sed -i.bu "s/default =/# default =/" src-tauri/Cargo.toml
+          rm src-tauri/Cargo.toml.bu
+          git diff src-tauri/Cargo.toml
+
+          yarn tauri build --target "${target}" --verbose --config src-tauri/tauri.app-store.conf.json
+
+          app_path="src-tauri/target/${target}/release/bundle/macos/Zoo Modeling App.app"
+          build_name="src-tauri/target/${target}/release/bundle/macos/Zoo Modeling App.pkg"
+          cp_dir="src-tauri/target/${target}/release/bundle/macos/Zoo Modeling App.app/Contents/embedded.provisionprofile"
+          entitlements="src-tauri/entitlements/app-store.entitlements"
+
+          cp "${profile}" "${cp_dir}"
+
+          codesign --deep --force -s "${sign_app}" --entitlements "${entitlements}" "${app_path}"
+
+          productbuild --component "${app_path}" /Applications/ --sign "${sign_install}" "${build_name}"
+
+          # Undo the changes to the Cargo.toml
+          git checkout src-tauri/Cargo.toml
+
+        env:
+          APPLE_TEAM_ID: ${{ secrets.APPLE_TEAM_ID }}
+          APPLE_STORE_PROVISIONING_PROFILE: ${{ secrets.APPLE_STORE_PROVISIONING_PROFILE }}
+          APPLE_STORE_DISTRIBUTION_CERT: ${{ secrets.APPLE_STORE_DISTRIBUTION_CERT }}
+          APPLE_STORE_INSTALLER_CERT: ${{ secrets.APPLE_STORE_INSTALLER_CERT }}
+          APPLE_STORE_P12_PASSWORD: ${{ secrets.APPLE_STORE_P12_PASSWORD }}
+
+
+      - name: 'Upload app to TestFlight'
+        uses: apple-actions/upload-testflight-build@v1
+        if: ${{ env.BUILD_RELEASE == 'true' && matrix.os == 'macos-14' }}
+        with:
+          app-path: 'src-tauri/target/universal-apple-darwin/release/bundle/macos/Zoo Modeling App.pkg'
+          issuer-id: ${{ secrets.APPLE_STORE_ISSUER_ID }}
+          api-key-id: ${{ secrets.APPLE_STORE_API_KEY_ID }}
+          api-private-key: ${{ secrets.APPLE_STORE_API_PRIVATE_KEY }}
+          app-type: osx
+
+
+      - name: Clean up after Mac App Store
+        if: ${{ env.BUILD_RELEASE == 'true' && matrix.os == 'macos-14' }}
+        shell: bash
+        run: |
+          git status
+          # remove our target builds because we want to make sure the later build
+          # includes the updater, and that anything we changed with the target
+          # does not persist
+          rm -rf src-tauri/target
+          # Lets get rid of the info.plist for the normal mac builds since its
+          # being sketchy.
+          rm src-tauri/Info.plist
+
+      # We do this after the apple store because the apple store build is
+      # specific and we want to overwrite it with the this new build after and
+      # not upload the apple store build to the public bucket
       - name: Build the app (release) and sign
         uses: tauri-apps/tauri-action@v0
         if: ${{ env.BUILD_RELEASE == 'true' }}
@@ -261,11 +353,10 @@ jobs:
         with:
           path: "${{ env.PREFIX }}/${{ env.MODE }}/bundle/*/*"
 
-      # TODO: re-enable linux e2e tests when possible
       - name: Run e2e tests (linux only)
-        if: false
+        if: matrix.os == 'ubuntu-latest'
         run: |
-          cargo install tauri-driver
+          cargo install tauri-driver --force
           source .env.${{ env.BUILD_RELEASE == 'true' && 'production' || 'development' }}
           export VITE_KC_API_BASE_URL
           xvfb-run yarn test:e2e:tauri

.github/workflows/create-release.yml

@@ -0,0 +1,37 @@
+name: Create Release
+
+on:
+  push:
+    branches:
+      - main
+
+jobs:
+  create-release:
+    runs-on: ubuntu-latest
+    permissions:
+      contents: write
+      pull-requests: read
+    if: contains(github.event.head_commit.message, 'Cut release v')
+    steps:
+      - uses: actions/github-script@v7
+        name: Read Cut release PR info and create release
+        with:
+          script: |
+            const { owner, repo } = context.repo
+            const pulls = await github.rest.repos.listPullRequestsAssociatedWithCommit({
+              owner,
+              repo,
+              commit_sha: context.sha,
+            })
+            const { title, body } = pulls.data[0]
+            const version = title.split('Cut release ')[1]
+
+            const result = await github.rest.repos.createRelease({
+              owner,
+              repo,
+              body,
+              tag_name: version,
+              name: version,
+              draft: true,
+            })
+            console.log(result)

.github/workflows/playwright.yml

@@ -12,11 +12,31 @@ concurrency:
 permissions:
   contents: write
   pull-requests: write
+  actions: read
+  
 
 jobs:
+
+  check-rust-changes:
+    runs-on: ubuntu-latest
+    outputs:
+      rust-changed: ${{ steps.filter.outputs.rust }}
+
+    steps:
+      - uses: actions/checkout@v4
+
+      - id: filter
+        name: Check for Rust changes
+        uses: dorny/paths-filter@v3
+        with:
+          filters: |
+            rust:
+              - 'src/wasm-lib/**'
+
   playwright-ubuntu:
     timeout-minutes: 60
     runs-on: ubuntu-latest-8-cores
+    needs: check-rust-changes
     steps:
     - uses: actions/checkout@v4
     - uses: actions/setup-node@v4
@@ -28,13 +48,38 @@ jobs:
       run: yarn
     - name: Install Playwright Browsers
       run: yarn playwright install --with-deps
+    - name: Download Wasm Cache
+      id: download-wasm
+      if: needs.check-rust-changes.outputs.rust-changed == 'false'
+      uses: dawidd6/action-download-artifact@v3
+      continue-on-error: true
+      with:
+        github_token: ${{secrets.GITHUB_TOKEN}}
+        name: wasm-bundle
+        workflow: build-and-store-wasm.yml
+        branch: main
+        path: src/wasm-lib/pkg
+    - name: copy wasm blob
+      if: needs.check-rust-changes.outputs.rust-changed == 'false'
+      run: cp src/wasm-lib/pkg/wasm_lib_bg.wasm public
+      continue-on-error: true
     - name: Setup Rust
       uses: dtolnay/rust-toolchain@stable
-    - name: Cache wasm
+    - name: Cache Wasm (because rust diff)
+      if: needs.check-rust-changes.outputs.rust-changed == 'true'
       uses: Swatinem/rust-cache@v2
       with:
         workspaces: './src/wasm-lib'
-    - name: build wasm
+    - name: OR Cache Wasm (because wasm cache failed)
+      if: steps.download-wasm.outcome == 'failure'
+      uses: Swatinem/rust-cache@v2
+      with:
+        workspaces: './src/wasm-lib'
+    - name: Build Wasm (because rust diff)
+      if: needs.check-rust-changes.outputs.rust-changed == 'true'
+      run: yarn build:wasm
+    - name: OR Build Wasm (because wasm cache failed)
+      if: steps.download-wasm.outcome == 'failure'
       run: yarn build:wasm
     - name: build web
       run: yarn build:local
@@ -89,6 +134,7 @@ jobs:
   playwright-macos:
     timeout-minutes: 60
     runs-on: macos-14
+    needs: check-rust-changes
     steps:
     - uses: actions/checkout@v4
     - uses: actions/setup-node@v4
@@ -99,13 +145,38 @@ jobs:
       run: yarn
     - name: Install Playwright Browsers
       run: yarn playwright install --with-deps
+    - name: Download Wasm Cache
+      id: download-wasm
+      if: needs.check-rust-changes.outputs.rust-changed == 'false'
+      uses: dawidd6/action-download-artifact@v3
+      continue-on-error: true
+      with:
+        github_token: ${{secrets.GITHUB_TOKEN}}
+        name: wasm-bundle
+        workflow: build-and-store-wasm.yml
+        branch: main
+        path: src/wasm-lib/pkg
+    - name: copy wasm blob
+      if: needs.check-rust-changes.outputs.rust-changed == 'false'
+      run: cp src/wasm-lib/pkg/wasm_lib_bg.wasm public
+      continue-on-error: true
     - name: Setup Rust
       uses: dtolnay/rust-toolchain@stable
-    - name: Cache wasm
+    - name: Cache Wasm (because rust diff)
+      if: needs.check-rust-changes.outputs.rust-changed == 'true'
       uses: Swatinem/rust-cache@v2
       with:
         workspaces: './src/wasm-lib'
-    - name: build wasm
+    - name: OR Cache Wasm (because wasm cache failed)
+      if: steps.download-wasm.outcome == 'failure'
+      uses: Swatinem/rust-cache@v2
+      with:
+        workspaces: './src/wasm-lib'
+    - name: Build Wasm (because rust diff)
+      if: needs.check-rust-changes.outputs.rust-changed == 'true'
+      run: yarn build:wasm
+    - name: OR Build Wasm (because wasm cache failed)
+      if: steps.download-wasm.outcome == 'failure'
       run: yarn build:wasm
     - name: build web
       run: yarn build:local

.gitignore

@@ -54,3 +54,4 @@ src/**/*.typegen.ts
 src-tauri/gen
 
 src/wasm-lib/grackle/stdlib_cube_partial.json
+Mac_App_Distribution.provisionprofile

.nvmrc

@@ -1 +1 @@
-v20.5.0
+v21.7.1

README.md

@@ -59,6 +59,10 @@ followed by:
 ```
 yarn build:wasm-dev
 ```
+or if you have the gh cli installed
+```
+./get-latest-wasm-bundle.sh # this will download the latest main wasm bundle
+```
 
 That will build the WASM binary and put in the `public` dir (though gitignored)
 
@@ -68,7 +72,13 @@ finally, to run the web app only, run:
 yarn start
 ```
 
-## Developing in Chrome
+If you're not an KittyCAD employee you won't be able to access the dev environment, you should copy everything from `.env.production` to `.env.development` to make it point to production instead, then when you navigate to `localhost:3000` the easiest way to sign in is to paste `localStorage.setItem('TOKEN_PERSIST_KEY', "your-token-from-https://zoo.dev/account/api-tokens")` replacing the with a real token from https://zoo.dev/account/api-tokens ofcourse, then navigate to localhost:3000 again. Note that navigating to localhost:3000/signin removes your token so you will need to set the token again.
+
+### Development environment variables
+
+The Copilot LSP plugin in the editor requires a Zoo API token to run. In production, we authenticate this with a token via cookie in the browser and device auth token in the desktop environment, but this token is inaccessible in the dev browser version because the cookie is considered "cross-site" (from `localhost` to `dev.zoo.dev`). There is an optional environment variable called `VITE_KC_DEV_TOKEN` that you can populate with a dev token in a `.env.development.local` file to not check it into Git, which will use that token instead of other methods for the LSP service.
+
+### Developing in Chrome
 
 Chrome is in the process of rolling out a new default which
 [blocks Third-Party Cookies](https://developer.chrome.com/en/docs/privacy-sandbox/third-party-cookie-phase-out/).

babel.config.js

@@ -1,3 +1,3 @@
 module.exports = {
-  presets: ["@babel/preset-env"],
+  presets: ['@babel/preset-env'],
 }

e2e/playwright/flow-tests.spec.ts

@@ -1,16 +1,17 @@
 import { test, expect } from '@playwright/test'
-import { getUtils } from './test-utils'
+import { makeTemplate, getUtils } from './test-utils'
 import waitOn from 'wait-on'
 import { roundOff } from 'lib/utils'
-import * as TOML from '@iarna/toml'
 import { SaveSettingsPayload } from 'lib/settings/settingsTypes'
 import { secrets } from './secrets'
 import {
   TEST_SETTINGS,
   TEST_SETTINGS_KEY,
   TEST_SETTINGS_CORRUPTED,
-  TEST_SETTINGS_ONBOARDING,
+  TEST_SETTINGS_ONBOARDING_EXPORT,
+  TEST_SETTINGS_ONBOARDING_START,
 } from './storageStates'
+import * as TOML from '@iarna/toml'
 
 /*
 debug helper: unfortunately we do rely on exact coord mouse clicks in a few places
@@ -104,6 +105,7 @@ test('Basic sketch', async ({ page }) => {
   |> startProfileAt(${commonPoints.startAt}, %)
   |> line([${commonPoints.num1}, 0], %)
   |> line([0, ${commonPoints.num1}], %)`)
+  await page.waitForTimeout(100)
   await page.mouse.click(startXPx, 500 - PUR * 20)
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
@@ -277,7 +279,7 @@ test('if you write invalid kcl you get inlined errors', async ({ page }) => {
     const bottomAng = 25
    */
   await page.click('.cm-content')
-  await page.keyboard.type('# error')
+  await page.keyboard.type('$ error')
 
   // press arrows to clear autocomplete
   await page.keyboard.press('ArrowLeft')
@@ -294,10 +296,10 @@ test('if you write invalid kcl you get inlined errors', async ({ page }) => {
 
   // error text on hover
   await page.hover('.cm-lint-marker-error')
-  await expect(page.getByText("found unknown token '#'")).toBeVisible()
+  await expect(page.getByText("found unknown token '$'")).toBeVisible()
 
   // select the line that's causing the error and delete it
-  await page.getByText('# error').click()
+  await page.getByText('$ error').click()
   await page.keyboard.press('End')
   await page.keyboard.down('Shift')
   await page.keyboard.press('Home')
@@ -328,6 +330,56 @@ test('if you write invalid kcl you get inlined errors', async ({ page }) => {
   await expect(page.locator('.cm-lint-marker-error')).not.toBeVisible()
 })
 
+test('if your kcl gets an error from the engine it is inlined', async ({
+  page,
+}) => {
+  const u = getUtils(page)
+  await page.addInitScript(async () => {
+    localStorage.setItem(
+      'persistCode',
+      `const box = startSketchOn('XY')
+|> startProfileAt([0, 0], %)
+|> line([0, 10], %)
+|> line([10, 0], %)
+|> line([0, -10], %, 'revolveAxis')
+|> close(%)
+|> extrude(10, %)
+
+const sketch001 = startSketchOn(box, "revolveAxis")
+|> startProfileAt([5, 10], %)
+|> line([0, -10], %)
+|> line([2, 0], %)
+|> line([0, -10], %)
+|> close(%)
+|> revolve({
+axis: getEdge('revolveAxis', box),
+angle: 90
+}, %)
+    `
+    )
+  })
+
+  await page.setViewportSize({ width: 1000, height: 500 })
+  await page.goto('/')
+
+  await u.waitForAuthSkipAppStart()
+
+  await u.openDebugPanel()
+  await u.expectCmdLog('[data-message-type="execution-done"]')
+  await u.closeDebugPanel()
+
+  // error in guter
+  await expect(page.locator('.cm-lint-marker-error')).toBeVisible()
+
+  // error text on hover
+  await page.hover('.cm-lint-marker-error')
+  await expect(
+    page.getByText(
+      'sketch profile must lie entirely on one side of the revolution axis'
+    )
+  ).toBeVisible()
+})
+
 test('executes on load', async ({ page }) => {
   const u = getUtils(page)
   await page.addInitScript(async () => {
@@ -394,9 +446,11 @@ test('re-executes', async ({ page }) => {
   ).toBeVisible()
 })
 
-test('Can create sketches on all planes and their back sides', async ({
-  page,
-}) => {
+const sketchOnPlaneAndBackSideTest = async (
+  page: any,
+  plane: string,
+  clickCoords: { x: number; y: number }
+) => {
   const u = getUtils(page)
   const PUR = 400 / 37.5 //pixeltoUnitRatio
   await page.setViewportSize({ width: 1200, height: 500 })
@@ -404,81 +458,72 @@ test('Can create sketches on all planes and their back sides', async ({
   await u.waitForAuthSkipAppStart()
   await u.openDebugPanel()
 
-  const camPos: [number, number, number] = [100, 100, 100]
-
-  const TestSinglePlane = async ({
-    viewCmd,
-    expectedCode,
-    clickCoords,
-  }: {
-    viewCmd: [number, number, number]
-    expectedCode: string
-    clickCoords: { x: number; y: number }
-  }) => {
-    await u.openDebugPanel()
-
-    await u.clearCommandLogs()
-    await page.getByRole('button', { name: 'Start Sketch' }).click()
-    await u.updateCamPosition(viewCmd)
-
-    await u.closeDebugPanel()
-    await page.mouse.click(clickCoords.x, clickCoords.y)
-    await page.waitForTimeout(300) // wait for animation
-
-    await expect(page.getByRole('button', { name: 'Line' })).toBeVisible()
-
-    // draw a line
-    const startXPx = 600
-
-    await u.closeDebugPanel()
-    await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-
-    await expect(page.locator('.cm-content')).toHaveText(expectedCode)
-
-    await page.getByRole('button', { name: 'Line' }).click()
-    await u.openAndClearDebugPanel()
-    await page.getByRole('button', { name: 'Exit Sketch' }).click()
-    await u.expectCmdLog('[data-message-type="execution-done"]')
-
-    await u.clearCommandLogs()
-    await u.removeCurrentCode()
+  const camCmdBackSide: [number, number, number] = [-100, -100, -100]
+  let camPos: [number, number, number] = [100, 100, 100]
+  if (plane === '-XY' || plane === '-YZ' || plane === '-XZ') {
+    camPos = camCmdBackSide
   }
 
-  const codeTemplate = (
-    plane = 'XY'
-  ) => `const part001 = startSketchOn('${plane}')
+  const code = `const part001 = startSketchOn('${plane}')
   |> startProfileAt([1.14, -1.54], %)`
-  await TestSinglePlane({
-    viewCmd: camPos,
-    expectedCode: codeTemplate('XY'),
-    clickCoords: { x: 600, y: 388 }, // red plane
-    // clickCoords: { x: 600, y: 400 }, // red plane // clicks grid helper and that causes problems, should fix so that these coords work too.
+
+  await u.openDebugPanel()
+
+  await u.clearCommandLogs()
+  await page.getByRole('button', { name: 'Start Sketch' }).click()
+  await u.updateCamPosition(camPos)
+
+  await u.closeDebugPanel()
+  await page.mouse.click(clickCoords.x, clickCoords.y)
+  await page.waitForTimeout(300) // wait for animation
+
+  await expect(page.getByRole('button', { name: 'Line' })).toBeVisible()
+
+  // draw a line
+  const startXPx = 600
+
+  await u.closeDebugPanel()
+  await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
+
+  await expect(page.locator('.cm-content')).toHaveText(code)
+
+  await page.getByRole('button', { name: 'Line' }).click()
+  await u.openAndClearDebugPanel()
+  await page.getByRole('button', { name: 'Exit Sketch' }).click()
+  await u.expectCmdLog('[data-message-type="execution-done"]')
+
+  await u.clearCommandLogs()
+  await u.removeCurrentCode()
+}
+
+test.describe('Can create sketches on all planes and their back sides', () => {
+  test('XY', async ({ page }) => {
+    await sketchOnPlaneAndBackSideTest(
+      page,
+      'XY',
+      { x: 600, y: 388 } // red plane
+      // { x: 600, y: 400 }, // red plane // clicks grid helper and that causes problems, should fix so that these coords work too.
+    )
   })
-  await TestSinglePlane({
-    viewCmd: camPos,
-    expectedCode: codeTemplate('YZ'),
-    clickCoords: { x: 700, y: 250 }, // green plane
+
+  test('YZ', async ({ page }) => {
+    await sketchOnPlaneAndBackSideTest(page, 'YZ', { x: 700, y: 250 }) // green plane
   })
-  await TestSinglePlane({
-    viewCmd: camPos,
-    expectedCode: codeTemplate('XZ'),
-    clickCoords: { x: 700, y: 80 }, // blue plane
+
+  test('XZ', async ({ page }) => {
+    await sketchOnPlaneAndBackSideTest(page, 'XZ', { x: 700, y: 80 }) // blue plane
   })
-  const camCmdBackSide: [number, number, number] = [-100, -100, -100]
-  await TestSinglePlane({
-    viewCmd: camCmdBackSide,
-    expectedCode: codeTemplate('-XY'),
-    clickCoords: { x: 601, y: 118 }, // back of red plane
+
+  test('-XY', async ({ page }) => {
+    await sketchOnPlaneAndBackSideTest(page, '-XY', { x: 600, y: 118 }) // back of red plane
   })
-  await TestSinglePlane({
-    viewCmd: camCmdBackSide,
-    expectedCode: codeTemplate('-YZ'),
-    clickCoords: { x: 730, y: 219 }, // back of green plane
+
+  test('-YZ', async ({ page }) => {
+    await sketchOnPlaneAndBackSideTest(page, '-YZ', { x: 700, y: 219 }) // back of green plane
   })
-  await TestSinglePlane({
-    viewCmd: camCmdBackSide,
-    expectedCode: codeTemplate('-XZ'),
-    clickCoords: { x: 680, y: 427 }, // back of blue plane
+
+  test('-XZ', async ({ page }) => {
+    await sketchOnPlaneAndBackSideTest(page, '-XZ', { x: 700, y: 427 }) // back of blue plane
   })
 })
 
@@ -510,7 +555,7 @@ test('Auto complete works', async ({ page }) => {
   // expect there to be three auto complete options
   await expect(page.locator('.cm-completionLabel')).toHaveCount(3)
   await page.getByText('startSketchOn').click()
-  await page.keyboard.type("'XY'")
+  await page.keyboard.type("'XZ'")
   await page.keyboard.press('Tab')
   await page.keyboard.press('Enter')
   await page.keyboard.type('  |> startProfi')
@@ -520,7 +565,10 @@ test('Auto complete works', async ({ page }) => {
   await page.keyboard.press('Enter') // accepting the auto complete, not a new line
 
   await page.keyboard.press('Tab')
+  await page.keyboard.type('12')
+  await page.waitForTimeout(100)
   await page.keyboard.press('Tab')
+  await page.waitForTimeout(100)
   await page.keyboard.press('Tab')
   await page.keyboard.press('Tab')
   await page.keyboard.press('Enter')
@@ -542,20 +590,19 @@ test('Auto complete works', async ({ page }) => {
   await expect(page.locator('.cm-completionLabel')).not.toBeVisible()
 
   await expect(page.locator('.cm-content'))
-    .toHaveText(`const part001 = startSketchOn('XY')
-  |> startProfileAt([3.14, 3.14], %)
+    .toHaveText(`const part001 = startSketchOn('XZ')
+  |> startProfileAt([3.14, 12], %)
   |> xLine(5, %) // lin`)
 })
 
 test('Stored settings are validated and fall back to defaults', async ({
   page,
-  context,
 }) => {
   const u = getUtils(page)
 
   // Override beforeEach test setup
   // with corrupted settings
-  await context.addInitScript(
+  await page.addInitScript(
     async ({ settingsKey, settings }) => {
       localStorage.setItem(settingsKey, settings)
     },
@@ -572,18 +619,18 @@ test('Stored settings are validated and fall back to defaults', async ({
   // Check the settings were reset
   const storedSettings = TOML.parse(
     await page.evaluate(
-      ({ settingsKey }) => localStorage.getItem(settingsKey) || '{}',
+      ({ settingsKey }) => localStorage.getItem(settingsKey) || '',
       { settingsKey: TEST_SETTINGS_KEY }
     )
   ) as { settings: SaveSettingsPayload }
 
-  expect(storedSettings.settings.app?.theme).toBe('dark')
+  expect(storedSettings.settings?.app?.theme).toBe(undefined)
 
   // Check that the invalid settings were removed
-  expect(storedSettings.settings.modeling?.defaultUnit).toBe(undefined)
-  expect(storedSettings.settings.modeling?.mouseControls).toBe(undefined)
-  expect(storedSettings.settings.app?.projectDirectory).toBe(undefined)
-  expect(storedSettings.settings.projects?.defaultProjectName).toBe(undefined)
+  expect(storedSettings.settings?.modeling?.defaultUnit).toBe(undefined)
+  expect(storedSettings.settings?.modeling?.mouseControls).toBe(undefined)
+  expect(storedSettings.settings?.app?.projectDirectory).toBe(undefined)
+  expect(storedSettings.settings?.projects?.defaultProjectName).toBe(undefined)
 })
 
 test('Project settings can be set and override user settings', async ({
@@ -634,6 +681,45 @@ test('Project settings can be set and override user settings', async ({
   await expect(page.locator('select[name="app-theme"]')).toHaveValue('light')
 })
 
+test('Click through each onboarding step', async ({ page }) => {
+  const u = getUtils(page)
+
+  // Override beforeEach test setup
+  await page.addInitScript(
+    async ({ settingsKey, settings }) => {
+      // Give no initial code, so that the onboarding start is shown immediately
+      localStorage.setItem('persistCode', '')
+      localStorage.setItem(settingsKey, settings)
+    },
+    {
+      settingsKey: TEST_SETTINGS_KEY,
+      settings: TOML.stringify({ settings: TEST_SETTINGS_ONBOARDING_START }),
+    }
+  )
+
+  await page.setViewportSize({ width: 1200, height: 1080 })
+  await page.goto('/')
+  await u.waitForAuthSkipAppStart()
+
+  // Test that the onboarding pane loaded
+  await expect(page.getByText('Welcome to Modeling App! This')).toBeVisible()
+
+  const nextButton = page.getByTestId('onboarding-next')
+
+  while ((await nextButton.innerText()) !== 'Finish') {
+    await expect(nextButton).toBeVisible()
+    await nextButton.click()
+  }
+
+  // Finish the onboarding
+  await expect(nextButton).toBeVisible()
+  await nextButton.click()
+
+  // Test that the onboarding pane is gone
+  await expect(page.getByTestId('onboarding-content')).not.toBeVisible()
+  await expect(page.url()).not.toContain('onboarding')
+})
+
 test('Onboarding redirects and code updating', async ({ page }) => {
   const u = getUtils(page)
 
@@ -646,7 +732,7 @@ test('Onboarding redirects and code updating', async ({ page }) => {
     },
     {
       settingsKey: TEST_SETTINGS_KEY,
-      settings: TOML.stringify({ settings: TEST_SETTINGS_ONBOARDING }),
+      settings: TOML.stringify({ settings: TEST_SETTINGS_ONBOARDING_EXPORT }),
     }
   )
 
@@ -690,7 +776,7 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
   await u.openDebugPanel()
 
   const xAxisClick = () =>
-    page.mouse.click(700, 250).then(() => page.waitForTimeout(100))
+    page.mouse.click(700, 253).then(() => page.waitForTimeout(100))
   const emptySpaceClick = () =>
     page.mouse.click(728, 343).then(() => page.waitForTimeout(100))
   const topHorzSegmentClick = () =>
@@ -715,6 +801,7 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${commonPoints.startAt}, %)`)
 
+  await page.waitForTimeout(100)
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
 
   await expect(page.locator('.cm-content'))
@@ -722,12 +809,14 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
   |> startProfileAt(${commonPoints.startAt}, %)
   |> line([${commonPoints.num1}, 0], %)`)
 
+  await page.waitForTimeout(100)
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 20)
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${commonPoints.startAt}, %)
   |> line([${commonPoints.num1}, 0], %)
   |> line([0, ${commonPoints.num1}], %)`)
+  await page.waitForTimeout(100)
   await page.mouse.click(startXPx, 500 - PUR * 20)
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
@@ -740,10 +829,14 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
   await page.getByRole('button', { name: 'Line' }).click()
 
   await u.closeDebugPanel()
-  const selectionSequence = async () => {
+  const selectionSequence = async (isSecondTime = false) => {
     await expect(page.getByTestId('hover-highlight')).not.toBeVisible()
 
-    await page.mouse.move(startXPx + PUR * 15, 500 - PUR * 10)
+    await page.waitForTimeout(100)
+    await page.mouse.move(
+      startXPx + PUR * 15,
+      isSecondTime ? 430 : 500 - PUR * 10
+    )
 
     await expect(page.getByTestId('hover-highlight')).toBeVisible()
     // bg-yellow-200 is more brittle than hover-highlight, but is closer to the user experience
@@ -753,7 +846,10 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
     // check mousing off, than mousing onto another line
     await page.mouse.move(startXPx + PUR * 10, 500 - PUR * 15) // mouse off
     await expect(page.getByTestId('hover-highlight')).not.toBeVisible()
-    await page.mouse.move(startXPx + PUR * 10, 500 - PUR * 20) // mouse onto another line
+    await page.mouse.move(
+      startXPx + PUR * 10,
+      isSecondTime ? 295 : 500 - PUR * 20
+    ) // mouse onto another line
     await expect(page.getByTestId('hover-highlight')).toBeVisible()
 
     // now check clicking works including axis
@@ -763,6 +859,7 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
     await page.keyboard.down('Shift')
     const absYButton = page.getByRole('button', { name: 'ABS Y' })
     await expect(absYButton).toBeDisabled()
+    await page.waitForTimeout(100)
     await xAxisClick()
     await page.keyboard.up('Shift')
     await absYButton.and(page.locator(':not([disabled])')).waitFor()
@@ -771,10 +868,12 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
     // clear selection by clicking on nothing
     await emptySpaceClick()
 
+    await page.waitForTimeout(100)
     // same selection but click the axis first
     await xAxisClick()
     await expect(absYButton).toBeDisabled()
     await page.keyboard.down('Shift')
+    await page.waitForTimeout(100)
     await topHorzSegmentClick()
 
     await page.keyboard.up('Shift')
@@ -787,6 +886,7 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
     await page.getByText(`  |> line([-${commonPoints.num2}, 0], %)`).click()
     await page.keyboard.down('Shift')
     await expect(absYButton).toBeDisabled()
+    await page.waitForTimeout(100)
     await xAxisClick()
     await page.keyboard.up('Shift')
     await expect(absYButton).not.toBeDisabled()
@@ -829,11 +929,16 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
   await page.waitForTimeout(100)
 
   // enter sketch again
-  await page.getByRole('button', { name: 'Edit Sketch' }).click()
+  await u.doAndWaitForCmd(
+    () => page.getByRole('button', { name: 'Edit Sketch' }).click(),
+    'default_camera_get_settings'
+  )
+  await page.waitForTimeout(150)
+
   await page.waitForTimeout(300) // wait for animation
 
   // hover again and check it works
-  await selectionSequence()
+  await selectionSequence(true)
 })
 
 test.describe('Command bar tests', () => {
@@ -969,6 +1074,7 @@ const part001 = startSketchOn('-XZ')
 })
 
 test('Can add multiple sketches', async ({ page }) => {
+  test.skip(process.platform === 'darwin', 'Can add multiple sketches')
   const u = getUtils(page)
   await page.setViewportSize({ width: 1200, height: 500 })
   const PUR = 400 / 37.5 //pixeltoUnitRatio
@@ -1019,6 +1125,7 @@ test('Can add multiple sketches', async ({ page }) => {
   |> startProfileAt(${commonPoints.startAt}, %)
   |> line([${commonPoints.num1}, 0], %)
   |> line([0, ${commonPoints.num1}], %)`)
+  await page.waitForTimeout(100)
   await page.mouse.click(startXPx, 500 - PUR * 20)
   const finalCodeFirstSketch = `const part001 = startSketchOn('-XZ')
   |> startProfileAt(${commonPoints.startAt}, %)
@@ -1034,24 +1141,33 @@ test('Can add multiple sketches', async ({ page }) => {
 
   await u.expectCmdLog('[data-message-type="execution-done"]')
 
-  await u.updateCamPosition([0, 100, 100])
+  await u.updateCamPosition([100, 100, 100])
+  await page.waitForTimeout(250)
 
   // start a new sketch
   await u.clearCommandLogs()
   await page.getByRole('button', { name: 'Start Sketch' }).click()
-  await page.waitForTimeout(100)
-  await page.mouse.click(673, 384)
+  await page.waitForTimeout(400)
+  await page.mouse.click(650, 450)
 
   await page.waitForTimeout(500) // TODO detect animation ending, or disable animation
   await u.clearAndCloseDebugPanel()
 
+  // on mock os there are issues with getting the camera to update
+  // it should not be selecting the 'XZ' plane here if the camera updated
+  // properly, but if we just role with it we can still verify everything
+  // in the rest of the test
+  const plane = process.platform === 'darwin' ? 'XZ' : 'XY'
+
+  await page.waitForTimeout(100)
   await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-  const startAt2 = '[0.93,-1.25]'
+  const startAt2 =
+    process.platform === 'darwin' ? '[9.75, -13.16]' : '[0.93, -1.25]'
   await expect(
     (await page.locator('.cm-content').innerText()).replace(/\s/g, '')
   ).toBe(
     `${finalCodeFirstSketch}
-const part002 = startSketchOn('XY')
+const part002 = startSketchOn('${plane}')
   |> startProfileAt(${startAt2}, %)`.replace(/\s/g, '')
   )
   await page.waitForTimeout(100)
@@ -1060,12 +1176,12 @@ const part002 = startSketchOn('XY')
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
   await page.waitForTimeout(100)
 
-  const num2 = 0.94
+  const num2 = process.platform === 'darwin' ? 9.84 : 0.94
   await expect(
     (await page.locator('.cm-content').innerText()).replace(/\s/g, '')
   ).toBe(
     `${finalCodeFirstSketch}
-const part002 = startSketchOn('XY')
+const part002 = startSketchOn('${plane}')
   |> startProfileAt(${startAt2}, %)
   |> line([${num2}, 0], %)`.replace(/\s/g, '')
   )
@@ -1075,21 +1191,29 @@ const part002 = startSketchOn('XY')
     (await page.locator('.cm-content').innerText()).replace(/\s/g, '')
   ).toBe(
     `${finalCodeFirstSketch}
-const part002 = startSketchOn('XY')
+const part002 = startSketchOn('${plane}')
   |> startProfileAt(${startAt2}, %)
   |> line([${num2}, 0], %)
-  |> line([0, ${roundOff(num2 - 0.01)}], %)`.replace(/\s/g, '')
+  |> line([0, ${roundOff(
+    num2 + (process.platform === 'darwin' ? 0.01 : -0.01)
+  )}], %)`.replace(/\s/g, '')
   )
+  await page.waitForTimeout(100)
   await page.mouse.click(startXPx, 500 - PUR * 20)
   await expect(
     (await page.locator('.cm-content').innerText()).replace(/\s/g, '')
   ).toBe(
     `${finalCodeFirstSketch}
-const part002 = startSketchOn('XY')
+const part002 = startSketchOn('${plane}')
   |> startProfileAt(${startAt2}, %)
   |> line([${num2}, 0], %)
-  |> line([0, ${roundOff(num2 - 0.01)}], %)
-  |> line([-1.87, 0], %)`.replace(/\s/g, '')
+  |> line([0, ${roundOff(
+    num2 + (process.platform === 'darwin' ? 0.01 : -0.01)
+  )}], %)
+  |> line([-${process.platform === 'darwin' ? 19.59 : 1.87}, 0], %)`.replace(
+      /\s/g,
+      ''
+    )
   )
 })
 
@@ -1189,7 +1313,7 @@ fn yohey = (pos) => {
     },
     selectionsSnippets
   )
-  await page.setViewportSize({ width: 1200, height: 500 })
+  await page.setViewportSize({ width: 1200, height: 1000 })
   await page.goto('/')
   await u.waitForAuthSkipAppStart()
 
@@ -1293,10 +1417,12 @@ test('Deselecting line tool should mean nothing happens on click', async ({
   await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
   previousCodeContent = await page.locator('.cm-content').innerText()
 
+  await page.waitForTimeout(100)
   await page.mouse.click(700, 300)
   await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
   previousCodeContent = await page.locator('.cm-content').innerText()
 
+  await page.waitForTimeout(100)
   await page.mouse.click(750, 300)
   await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
   previousCodeContent = await page.locator('.cm-content').innerText()
@@ -1321,16 +1447,16 @@ test('Can edit segments by dragging their handles', async ({ page }) => {
     page.getByRole('button', { name: 'Start Sketch' })
   ).not.toBeDisabled()
 
-  const startPX = [652, 418]
-  const lineEndPX = [794, 416]
-  const arcEndPX = [893, 318]
+  const startPX = [665, 458]
+  const lineEndPX = [842, 458]
+  const arcEndPX = [971, 342]
 
   const dragPX = 30
 
   await page.getByText('startProfileAt([4.61, -14.01], %)').click()
   await expect(page.getByRole('button', { name: 'Edit Sketch' })).toBeVisible()
   await page.getByRole('button', { name: 'Edit Sketch' }).click()
-  await page.waitForTimeout(100)
+  await page.waitForTimeout(400)
   let prevContent = await page.locator('.cm-content').innerText()
 
   const step5 = { steps: 5 }
@@ -1340,7 +1466,7 @@ test('Can edit segments by dragging their handles', async ({ page }) => {
   await page.mouse.down()
   await page.mouse.move(startPX[0] + dragPX, startPX[1] - dragPX, step5)
   await page.mouse.up()
-  await page.waitForTimeout(100)
+
   await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
   prevContent = await page.locator('.cm-content').innerText()
 
@@ -1368,92 +1494,95 @@ test('Can edit segments by dragging their handles', async ({ page }) => {
   // expect the code to have changed
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
-  |> startProfileAt([7.01, -11.79], %)
-  |> line([14.69, 2.73], %)
-  |> tangentialArcTo([27.6, -3.25], %)`)
+  |> startProfileAt([6.44, -12.07], %)
+  |> line([14.04, 2.03], %)
+  |> tangentialArcTo([27.19, -4.2], %)`)
 })
 
-test('Snap to close works (at any scale)', async ({ page }) => {
+const doSnapAtDifferentScales = async (
+  page: any,
+  camPos: [number, number, number],
+  scale = 1,
+  fudge = 0
+) => {
   const u = getUtils(page)
   await page.setViewportSize({ width: 1200, height: 500 })
   await page.goto('/')
   await u.waitForAuthSkipAppStart()
   await u.openDebugPanel()
 
-  await expect(
-    page.getByRole('button', { name: 'Start Sketch' })
-  ).not.toBeDisabled()
-  await expect(page.getByRole('button', { name: 'Start Sketch' })).toBeVisible()
-
-  const doSnapAtDifferentScales = async (
-    camPos: [number, number, number],
-    expectedCode: string
-  ) => {
-    await u.clearCommandLogs()
-    await page.getByRole('button', { name: 'Start Sketch' }).click()
-    await page.waitForTimeout(100)
-
-    await u.openAndClearDebugPanel()
-    await u.updateCamPosition(camPos)
-    await u.closeDebugPanel()
-
-    // select a plane
-    await page.mouse.click(700, 200)
-    await expect(page.locator('.cm-content')).toHaveText(
-      `const part001 = startSketchOn('XZ')`
-    )
-
-    let prevContent = await page.locator('.cm-content').innerText()
-
-    const pointA = [700, 200]
-    const pointB = [900, 200]
-    const pointC = [900, 400]
-
-    // draw three lines
-    await page.mouse.click(pointA[0], pointA[1])
-    await page.waitForTimeout(100)
-    await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
-    prevContent = await page.locator('.cm-content').innerText()
-
-    await page.mouse.click(pointB[0], pointB[1])
-    await page.waitForTimeout(100)
-    await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
-    prevContent = await page.locator('.cm-content').innerText()
-
-    await page.mouse.click(pointC[0], pointC[1])
-    await page.waitForTimeout(100)
-    await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
-    prevContent = await page.locator('.cm-content').innerText()
-
-    await page.mouse.move(pointA[0] - 12, pointA[1] + 12)
-    const pointNotQuiteA = [pointA[0] - 7, pointA[1] + 7]
-    await page.mouse.move(pointNotQuiteA[0], pointNotQuiteA[1], { steps: 10 })
-
-    await page.mouse.click(pointNotQuiteA[0], pointNotQuiteA[1])
-    await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
-    prevContent = await page.locator('.cm-content').innerText()
-
-    await expect(page.locator('.cm-content')).toHaveText(expectedCode)
-
-    // exit sketch
-    await u.openAndClearDebugPanel()
-    await page.getByRole('button', { name: 'Exit Sketch' }).click()
-    await u.expectCmdLog('[data-message-type="execution-done"]')
-    await u.removeCurrentCode()
-  }
-
-  const codeTemplate = (
-    scale = 1,
-    fudge = 0
-  ) => `const part001 = startSketchOn('XZ')
+  const code = `const part001 = startSketchOn('XZ')
 |> startProfileAt([${roundOff(scale * 87.68)}, ${roundOff(scale * 43.84)}], %)
 |> line([${roundOff(scale * 175.36)}, 0], %)
 |> line([0, -${roundOff(scale * 175.36) + fudge}], %)
 |> close(%)`
 
-  await doSnapAtDifferentScales([0, 100, 100], codeTemplate(0.01, 0.01))
+  await expect(
+    page.getByRole('button', { name: 'Start Sketch' })
+  ).not.toBeDisabled()
+  await expect(page.getByRole('button', { name: 'Start Sketch' })).toBeVisible()
 
-  await doSnapAtDifferentScales([0, 10000, 10000], codeTemplate())
+  await u.clearCommandLogs()
+  await page.getByRole('button', { name: 'Start Sketch' }).click()
+  await page.waitForTimeout(100)
+
+  await u.openAndClearDebugPanel()
+  await u.updateCamPosition(camPos)
+  await u.closeDebugPanel()
+
+  // select a plane
+  await page.mouse.click(700, 200)
+  await expect(page.locator('.cm-content')).toHaveText(
+    `const part001 = startSketchOn('XZ')`
+  )
+
+  let prevContent = await page.locator('.cm-content').innerText()
+
+  const pointA = [700, 200]
+  const pointB = [900, 200]
+  const pointC = [900, 400]
+
+  // draw three lines
+  await page.mouse.click(pointA[0], pointA[1])
+  await page.waitForTimeout(100)
+  await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+  prevContent = await page.locator('.cm-content').innerText()
+
+  await page.mouse.click(pointB[0], pointB[1])
+  await page.waitForTimeout(100)
+  await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+  prevContent = await page.locator('.cm-content').innerText()
+
+  await page.mouse.click(pointC[0], pointC[1])
+  await page.waitForTimeout(100)
+  await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+  prevContent = await page.locator('.cm-content').innerText()
+
+  await page.mouse.move(pointA[0] - 12, pointA[1] + 12)
+  const pointNotQuiteA = [pointA[0] - 7, pointA[1] + 7]
+  await page.mouse.move(pointNotQuiteA[0], pointNotQuiteA[1], { steps: 10 })
+
+  await page.mouse.click(pointNotQuiteA[0], pointNotQuiteA[1])
+  await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+  prevContent = await page.locator('.cm-content').innerText()
+
+  await expect(page.locator('.cm-content')).toHaveText(code)
+
+  // exit sketch
+  await u.openAndClearDebugPanel()
+  await page.getByRole('button', { name: 'Exit Sketch' }).click()
+  await u.expectCmdLog('[data-message-type="execution-done"]')
+  await u.removeCurrentCode()
+}
+
+test.describe('Snap to close works (at any scale)', () => {
+  test('[0, 100, 100]', async ({ page }) => {
+    await doSnapAtDifferentScales(page, [0, 100, 100], 0.01, 0.01)
+  })
+
+  test('[0, 10000, 10000]', async ({ page }) => {
+    await doSnapAtDifferentScales(page, [0, 10000, 10000])
+  })
 })
 
 test('Sketch on face', async ({ page }) => {
@@ -1486,38 +1615,46 @@ test('Sketch on face', async ({ page }) => {
   ).not.toBeDisabled()
 
   await page.getByRole('button', { name: 'Start Sketch' }).click()
+  await page.waitForTimeout(300)
 
   let previousCodeContent = await page.locator('.cm-content').innerText()
 
-  await page.mouse.click(793, 133)
+  await u.openAndClearDebugPanel()
+  await u.doAndWaitForCmd(
+    () => page.mouse.click(793, 133),
+    'default_camera_get_settings',
+    true
+  )
+  await page.waitForTimeout(150)
 
   const firstClickPosition = [612, 238]
   const secondClickPosition = [661, 242]
   const thirdClickPosition = [609, 267]
 
-  await page.waitForTimeout(300)
-
   await page.mouse.click(firstClickPosition[0], firstClickPosition[1])
   await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
   previousCodeContent = await page.locator('.cm-content').innerText()
 
+  await page.waitForTimeout(100)
   await page.mouse.click(secondClickPosition[0], secondClickPosition[1])
   await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
   previousCodeContent = await page.locator('.cm-content').innerText()
 
+  await page.waitForTimeout(100)
   await page.mouse.click(thirdClickPosition[0], thirdClickPosition[1])
   await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
   previousCodeContent = await page.locator('.cm-content').innerText()
 
+  await page.waitForTimeout(100)
   await page.mouse.click(firstClickPosition[0], firstClickPosition[1])
   await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
   previousCodeContent = await page.locator('.cm-content').innerText()
 
   await expect(page.locator('.cm-content'))
     .toContainText(`const part002 = startSketchOn(part001, 'seg01')
-  |> startProfileAt([1.03, 1.03], %)
-  |> line([4.18, -0.35], %)
-  |> line([-4.44, -2.13], %)
+  |> startProfileAt([-12.83, 6.7], %)
+  |> line([2.87, -0.23], %)
+  |> line([-3.05, -1.47], %)
   |> close(%)`)
 
   await u.openAndClearDebugPanel()
@@ -1527,9 +1664,14 @@ test('Sketch on face', async ({ page }) => {
   await u.updateCamPosition([1049, 239, 686])
   await u.closeDebugPanel()
 
-  await page.getByText('startProfileAt([1.03, 1.03], %)').click()
+  await page.getByText('startProfileAt([-12.83, 6.7], %)').click()
   await expect(page.getByRole('button', { name: 'Edit Sketch' })).toBeVisible()
-  await page.getByRole('button', { name: 'Edit Sketch' }).click()
+  await u.doAndWaitForCmd(
+    () => page.getByRole('button', { name: 'Edit Sketch' }).click(),
+    'default_camera_get_settings',
+    true
+  )
+  await page.waitForTimeout(150)
   await page.setViewportSize({ width: 1200, height: 1200 })
   await u.openAndClearDebugPanel()
   await u.updateCamPosition([452, -152, 1166])
@@ -1547,21 +1689,20 @@ test('Sketch on face', async ({ page }) => {
   await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
   previousCodeContent = await page.locator('.cm-content').innerText()
 
-  await expect(page.locator('.cm-content'))
-    .toContainText(`const part002 = startSketchOn(part001, 'seg01')
-|> startProfileAt([1.03, 1.03], %)
-|> line([${process?.env?.CI ? 2.74 : 2.93}, -${
-    process?.env?.CI ? 0.24 : 0.2
-  }], %)
-|> line([-4.44, -2.13], %)
-|> close(%)`)
+  const result = makeTemplate`const part002 = startSketchOn(part001, 'seg01')
+  |> startProfileAt([-12.83, 6.7], %)
+  |> line([${[2.28, 2.35]}, -${0.07}], %)
+  |> line([-3.05, -1.47], %)
+  |> close(%)`
+
+  await expect(page.locator('.cm-content')).toHaveText(result.regExp)
 
   // exit sketch
   await u.openAndClearDebugPanel()
   await page.getByRole('button', { name: 'Exit Sketch' }).click()
   await u.expectCmdLog('[data-message-type="execution-done"]')
 
-  await page.getByText('startProfileAt([1.03, 1.03], %)').click()
+  await page.getByText('startProfileAt([-12.83, 6.7], %)').click()
 
   await expect(page.getByRole('button', { name: 'Extrude' })).not.toBeDisabled()
   await page.getByRole('button', { name: 'Extrude' }).click()
@@ -1573,13 +1714,87 @@ test('Sketch on face', async ({ page }) => {
   await expect(page.getByText('Confirm Extrude')).toBeVisible()
   await page.keyboard.press('Enter')
 
-  await expect(page.locator('.cm-content'))
-    .toContainText(`const part002 = startSketchOn(part001, 'seg01')
-|> startProfileAt([1.03, 1.03], %)
-|> line([${process?.env?.CI ? 2.74 : 2.93}, -${
-    process?.env?.CI ? 0.24 : 0.2
-  }], %)
-|> line([-4.44, -2.13], %)
-|> close(%)
-|> extrude(5 + 7, %)`)
+  const result2 = result.genNext`
+  |> extrude(${[5, 5]} + 7, %)`
+  await expect(page.locator('.cm-content')).toHaveText(result2.regExp)
+})
+
+test('Can code mod a line length', async ({ page }) => {
+  await page.addInitScript(async () => {
+    localStorage.setItem(
+      'persistCode',
+      `const part001 = startSketchOn('XY')
+  |> startProfileAt([-10, -10], %)
+  |> line([20, 0], %)
+  |> line([0, 20], %)
+  |> xLine(-20, %)
+`
+    )
+  })
+
+  const u = getUtils(page)
+  const PUR = 400 / 37.5 //pixeltoUnitRatio
+  await page.setViewportSize({ width: 1200, height: 500 })
+  await page.goto('/')
+  await u.waitForAuthSkipAppStart()
+  await u.openDebugPanel()
+  await u.expectCmdLog('[data-message-type="execution-done"]')
+  await u.closeDebugPanel()
+
+  // Click the line of code for xLine.
+  await page.getByText(`xLine(-20, %)`).click() // TODO remove this and reinstate // await topHorzSegmentClick()
+  await page.waitForTimeout(100)
+
+  // enter sketch again
+  await page.getByRole('button', { name: 'Edit Sketch' }).click()
+  await page.waitForTimeout(350) // wait for animation
+
+  const startXPx = 500
+  await page.mouse.move(startXPx + PUR * 15, 250 - PUR * 10)
+  await page.mouse.click(615, 102)
+  await page.getByRole('button', { name: 'length', exact: true }).click()
+  await page.getByText('Add constraining value').click()
+
+  await expect(page.locator('.cm-content')).toHaveText(
+    `const length001 = 20const part001 = startSketchOn('XY')  |> startProfileAt([-10, -10], %)  |> line([20, 0], %)  |> line([0, 20], %)  |> xLine(-length001, %)`
+  )
+})
+
+test('Extrude from command bar selects extrude line after', async ({
+  page,
+}) => {
+  await page.addInitScript(async () => {
+    localStorage.setItem(
+      'persistCode',
+      `const part001 = startSketchOn('XY')
+  |> startProfileAt([-10, -10], %)
+  |> line([20, 0], %)
+  |> line([0, 20], %)
+  |> xLine(-20, %)
+  |> close(%)
+    `
+    )
+  })
+
+  const u = getUtils(page)
+  await page.setViewportSize({ width: 1200, height: 500 })
+  await page.goto('/')
+  await u.waitForAuthSkipAppStart()
+  await u.openDebugPanel()
+  await u.expectCmdLog('[data-message-type="execution-done"]')
+  await u.closeDebugPanel()
+
+  // Click the line of code for xLine.
+  await page.getByText(`close(%)`).click() // TODO remove this and reinstate // await topHorzSegmentClick()
+  await page.waitForTimeout(100)
+
+  await page.getByRole('button', { name: 'Extrude' }).click()
+  await page.waitForTimeout(100)
+  await page.keyboard.press('Enter')
+  await page.waitForTimeout(100)
+  await page.keyboard.press('Enter')
+  await page.waitForTimeout(100)
+  await expect(page.locator('.cm-activeLine')).toHaveText(
+    `  |> extrude(5 + 7, %)`
+  )
 })

e2e/playwright/snapshot-tests.spec.ts

@@ -27,6 +27,16 @@ test.beforeEach(async ({ page }) => {
       settings: TOML.stringify({ settings: TEST_SETTINGS }),
     }
   )
+
+  // Make the user avatar image always 404
+  // so we see the fallback menu icon for all snapshot tests
+  await page.route('https://lh3.googleusercontent.com/**', async (route) => {
+    await route.fulfill({
+      status: 404,
+      contentType: 'text/plain',
+      body: 'Not Found!',
+    })
+  })
 })
 
 test.setTimeout(60_000)
@@ -326,10 +336,7 @@ const part001 = startSketchOn('-XZ')
   }
 })
 
-test('extrude on each default plane should be stable', async ({
-  page,
-  context,
-}) => {
+const extrudeDefaultPlane = async (context: any, page: any, plane: string) => {
   await context.addInitScript(async () => {
     localStorage.setItem(
       'SETTINGS_PERSIST_KEY',
@@ -346,8 +353,8 @@ test('extrude on each default plane should be stable', async ({
       })
     )
   })
-  const u = getUtils(page)
-  const makeCode = (plane = 'XY') => `const part001 = startSketchOn('${plane}')
+
+  const code = `const part001 = startSketchOn('${plane}')
   |> startProfileAt([7.00, 4.40], %)
   |> line([6.60, -0.20], %)
   |> line([2.80, 5.00], %)
@@ -356,9 +363,11 @@ test('extrude on each default plane should be stable', async ({
   |> close(%)
   |> extrude(10.00, %)
 `
-  await context.addInitScript(async (code) => {
+  await page.addInitScript(async (code: string) => {
     localStorage.setItem('persistCode', code)
-  }, makeCode('XY'))
+  })
+
+  const u = getUtils(page)
   await page.setViewportSize({ width: 1200, height: 500 })
   await page.goto('/')
   await u.waitForAuthSkipAppStart()
@@ -368,34 +377,48 @@ test('extrude on each default plane should be stable', async ({
   await u.expectCmdLog('[data-message-type="execution-done"]')
   await u.clearAndCloseDebugPanel()
   await page.waitForTimeout(200)
+  // clear code
+  await u.removeCurrentCode()
+  await u.openAndClearDebugPanel()
+  await u.doAndWaitForImageDiff(
+    () => page.locator('.cm-content').fill(code),
+    200
+  )
+  // wait for execution done
+  await u.expectCmdLog('[data-message-type="execution-done"]')
+  await u.clearAndCloseDebugPanel()
 
-  const runSnapshotsForOtherPlanes = async (plane = 'XY') => {
-    // clear code
-    await u.removeCurrentCode()
-    // add makeCode('XZ')
-    await u.openAndClearDebugPanel()
-    await u.doAndWaitForImageDiff(
-      () => page.locator('.cm-content').fill(makeCode(plane)),
-      200
-    )
-    // wait for execution done
-    await u.expectCmdLog('[data-message-type="execution-done"]')
-    await u.clearAndCloseDebugPanel()
+  await u.closeKclCodePanel()
+  await expect(page).toHaveScreenshot({
+    maxDiffPixels: 100,
+  })
+  await u.openKclCodePanel()
+}
 
-    await u.closeKclCodePanel()
-    await expect(page).toHaveScreenshot({
-      maxDiffPixels: 100,
-    })
-    await u.openKclCodePanel()
-  }
-  await runSnapshotsForOtherPlanes('XY')
-  await runSnapshotsForOtherPlanes('-XY')
+test.describe('extrude on default planes should be stable', () => {
+  test('XY', async ({ page, context }) => {
+    await extrudeDefaultPlane(context, page, 'XY')
+  })
 
-  await runSnapshotsForOtherPlanes('XZ')
-  await runSnapshotsForOtherPlanes('-XZ')
+  test('XZ', async ({ page, context }) => {
+    await extrudeDefaultPlane(context, page, 'XZ')
+  })
 
-  await runSnapshotsForOtherPlanes('YZ')
-  await runSnapshotsForOtherPlanes('-YZ')
+  test('YZ', async ({ page, context }) => {
+    await extrudeDefaultPlane(context, page, 'YZ')
+  })
+
+  test('-XY', async ({ page, context }) => {
+    await extrudeDefaultPlane(context, page, '-XY')
+  })
+
+  test('-XZ', async ({ page, context }) => {
+    await extrudeDefaultPlane(context, page, '-XZ')
+  })
+
+  test('-YZ', async ({ page, context }) => {
+    await extrudeDefaultPlane(context, page, '-YZ')
+  })
 })
 
 test('Draft segments should look right', async ({ page, context }) => {
@@ -457,6 +480,52 @@ test('Draft segments should look right', async ({ page, context }) => {
   })
 })
 
+test('Draft rectangles should look right', async ({ page, context }) => {
+  const u = getUtils(page)
+  await page.setViewportSize({ width: 1200, height: 500 })
+  const PUR = 400 / 37.5 //pixeltoUnitRatio
+  await page.goto('/')
+  await u.waitForAuthSkipAppStart()
+  await u.openDebugPanel()
+
+  await expect(
+    page.getByRole('button', { name: 'Start Sketch' })
+  ).not.toBeDisabled()
+  await expect(page.getByRole('button', { name: 'Start Sketch' })).toBeVisible()
+
+  // click on "Start Sketch" button
+  await u.clearCommandLogs()
+  await u.doAndWaitForImageDiff(
+    () => page.getByRole('button', { name: 'Start Sketch' }).click(),
+    200
+  )
+
+  // select a plane
+  await page.mouse.click(700, 200)
+
+  await expect(page.locator('.cm-content')).toHaveText(
+    `const part001 = startSketchOn('-XZ')`
+  )
+
+  await page.waitForTimeout(300) // TODO detect animation ending, or disable animation
+  await u.closeDebugPanel()
+
+  const startXPx = 600
+
+  // Equip the rectangle tool
+  await page.getByRole('button', { name: 'Line' }).click()
+  await page.getByRole('button', { name: 'Rectangle' }).click()
+
+  // Draw the rectangle
+  await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 30)
+  await page.mouse.move(startXPx + PUR * 10, 500 - PUR * 10, { steps: 5 })
+
+  // Ensure the draft rectangle looks the same as it usually does
+  await expect(page).toHaveScreenshot({
+    maxDiffPixels: 100,
+  })
+})
+
 test.describe('Client side scene scale should match engine scale', () => {
   test('Inch scale', async ({ page }) => {
     const u = getUtils(page)

e2e/playwright/storageStates.ts

@@ -1,12 +1,13 @@
 import { SaveSettingsPayload } from 'lib/settings/settingsTypes'
 import { Themes } from 'lib/theme'
 
-export const TEST_SETTINGS_KEY = '/user.toml'
+export const TEST_SETTINGS_KEY = '/settings.toml'
 export const TEST_SETTINGS = {
   app: {
     theme: Themes.Dark,
     onboardingStatus: 'dismissed',
     projectDirectory: '',
+    enableSSAO: false,
   },
   modeling: {
     defaultUnit: 'in',
@@ -21,9 +22,14 @@ export const TEST_SETTINGS = {
   },
 } satisfies Partial<SaveSettingsPayload>
 
-export const TEST_SETTINGS_ONBOARDING = {
+export const TEST_SETTINGS_ONBOARDING_EXPORT = {
   ...TEST_SETTINGS,
-  app: { ...TEST_SETTINGS.app, onboardingStatus: '/export ' },
+  app: { ...TEST_SETTINGS.app, onboardingStatus: '/export' },
+} satisfies Partial<SaveSettingsPayload>
+
+export const TEST_SETTINGS_ONBOARDING_START = {
+  ...TEST_SETTINGS,
+  app: { ...TEST_SETTINGS.app, onboardingStatus: '' },
 } satisfies Partial<SaveSettingsPayload>
 
 export const TEST_SETTINGS_CORRUPTED = {

e2e/playwright/test-utils.ts

@@ -182,3 +182,76 @@ export function getUtils(page: Page) {
       }),
   }
 }
+
+type TemplateOptions = Array<number | Array<number>>
+
+type makeTemplateReturn = {
+  regExp: RegExp
+  genNext: (
+    templateParts: TemplateStringsArray,
+    ...options: TemplateOptions
+  ) => makeTemplateReturn
+}
+
+const escapeRegExp = (string: string) => {
+  return string.replace(/[.*+?^${}()|[\]\\]/g, '\\$&') // $& means the whole matched string
+}
+
+const _makeTemplate = (
+  templateParts: TemplateStringsArray,
+  ...options: TemplateOptions
+) => {
+  const length = Math.max(...options.map((a) => (Array.isArray(a) ? a[0] : 0)))
+  let reExpTemplate = ''
+  for (let i = 0; i < length; i++) {
+    const currentStr = templateParts.map((str, index) => {
+      const currentOptions = options[index]
+      return (
+        escapeRegExp(str) +
+        String(
+          Array.isArray(currentOptions)
+            ? currentOptions[i]
+            : typeof currentOptions === 'number'
+            ? currentOptions
+            : ''
+        )
+      )
+    })
+    reExpTemplate += '|' + currentStr.join('')
+  }
+  return new RegExp(reExpTemplate)
+}
+
+/**
+ * Tool for making templates to match code snippets in the editor with some fudge factor,
+ * as there's some level of non-determinism.
+ *
+ * Usage is as such:
+ * ```typescript
+ * const result = makeTemplate`const myVar = aFunc(${[1, 2, 3]})`
+ * await expect(page.locator('.cm-content')).toHaveText(result.regExp)
+ * ```
+ * Where the value `1`, `2` or `3` are all valid and should make the test pass.
+ *
+ * The function also has a `genNext` function that allows you to chain multiple templates
+ * together without having to repeat previous parts of the template.
+ * ```typescript
+ * const result2 = result.genNext`const myVar2 = aFunc(${[4, 5, 6]})`
+ * ```
+ */
+export const makeTemplate: (
+  templateParts: TemplateStringsArray,
+  ...values: TemplateOptions
+) => makeTemplateReturn = (templateParts, ...options) => {
+  return {
+    regExp: _makeTemplate(templateParts, ...options),
+    genNext: (
+      nextTemplateParts: TemplateStringsArray,
+      ...nextOptions: TemplateOptions
+    ) =>
+      makeTemplate(
+        [...templateParts, ...nextTemplateParts] as any as TemplateStringsArray,
+        [...options, ...nextOptions] as any
+      ),
+  }
+}

e2e/tauri/specs/auth.e2e.ts

@@ -2,7 +2,7 @@ import { browser, $, expect } from '@wdio/globals'
 import fs from 'fs/promises'
 
 const documentsDir = `${process.env.HOME}/Documents`
-const userSettingsFile = `${process.env.HOME}/.config/dev.zoo.modeling-app/user.toml`
+const userSettingsDir = `${process.env.HOME}/.config/dev.zoo.modeling-app`
 const defaultProjectDir = `${documentsDir}/zoo-modeling-app-projects`
 const newProjectDir = `${documentsDir}/a-different-directory`
 const userCodeDir = '/tmp/kittycad_user_code'
@@ -29,8 +29,10 @@ describe('ZMA (Tauri, Linux)', () => {
     // Clean up filesystem from previous tests
     await new Promise((resolve) => setTimeout(resolve, 100))
     await fs.rm(defaultProjectDir, { force: true, recursive: true })
+    await fs.rm(newProjectDir, { force: true, recursive: true })
     await fs.rm(userCodeDir, { force: true })
-    await fs.rm(userSettingsFile, { force: true })
+    await fs.rm(userSettingsDir, { force: true, recursive: true })
+    await fs.mkdir(defaultProjectDir, { recursive: true })
     await fs.mkdir(newProjectDir, { recursive: true })
 
     const signInButton = await $('[data-testid="sign-in-button"]')
@@ -70,8 +72,9 @@ describe('ZMA (Tauri, Linux)', () => {
     console.log(cr.status)
 
     // Now should be signed in
+    await new Promise((resolve) => setTimeout(resolve, 10000))
     const newFileButton = await $('[data-testid="home-new-file"]')
-    expect(await newFileButton.getText()).toEqual('New file')
+    expect(await newFileButton.getText()).toEqual('New project')
   })
 
   it('opens the settings page, checks filesystem settings, and closes the settings page', async () => {
@@ -117,8 +120,8 @@ describe('ZMA (Tauri, Linux)', () => {
   it('opens the new file and expects a loading stream', async () => {
     const projectLink = await $('[data-testid="project-link"]')
     await click(projectLink)
-    const loadingText = await $('[data-testid="loading-stream"]')
-    expect(await loadingText.getText()).toContain('Loading stream...')
+    const errorText = await $('[data-testid="unexpected-error"]')
+    expect(await errorText.getText()).toContain('unexpected error')
     await browser.execute('window.location.href = "tauri://localhost/home"')
   })
 

get-latest-wasm-bundle.sh

@@ -0,0 +1,24 @@
+#!/bin/bash
+
+# Set the repository owner and name
+REPO_OWNER="KittyCAD"
+REPO_NAME="modeling-app"
+WORKFLOW_NAME="build-and-store-wasm.yml"
+ARTIFACT_NAME="wasm-bundle"
+
+# Fetch the latest completed workflow run ID for the specified workflow
+# RUN_ID=$(gh api repos/$REPO_OWNER/$REPO_NAME/actions/workflows/$WORKFLOW_NAME/runs --paginate --jq '.workflow_runs[] | select(.status=="completed") | .id' | head -n 1)
+RUN_ID=$(gh api repos/$REPO_OWNER/$REPO_NAME/actions/workflows/$WORKFLOW_NAME/runs --paginate --jq '.workflow_runs[] | select(.status=="completed" and .conclusion=="success") | .id' | head -n 1)
+
+echo $RUN_ID
+
+# Check if a valid RUN_ID was found
+if [ -z "$RUN_ID" ]; then
+  echo "Failed to find a workflow run for $WORKFLOW_NAME."
+  exit 1
+fi
+
+gh run download $RUN_ID --repo $REPO_OWNER/$REPO_NAME --name $ARTIFACT_NAME --dir ./src/wasm-lib/pkg
+
+cp src/wasm-lib/pkg/wasm_lib_bg.wasm public
+echo "latest wasm copied to public folder"

make-release.sh

@@ -57,7 +57,7 @@ echo "New version number without 'v': $new_version_number"
 git checkout -b "cut-release-$new_version"
 
 echo "$(jq --arg v "$new_version_number" '.version=$v' package.json --indent 2)" > package.json
-echo "$(jq --arg v "$new_version_number" '.package.version=$v' src-tauri/tauri.conf.json --indent 2)" > src-tauri/tauri.conf.json
+echo "$(jq --arg v "$new_version_number" '.version=$v' src-tauri/tauri.conf.json --indent 2)" > src-tauri/tauri.conf.json
 
 git add package.json src-tauri/tauri.conf.json
 git commit -m "Cut release $new_version"

package.json

@@ -1,27 +1,28 @@
 {
   "name": "untitled-app",
-  "version": "0.17.3",
+  "version": "0.20.1",
   "private": true,
   "dependencies": {
-    "@codemirror/autocomplete": "^6.15.0",
+    "@codemirror/autocomplete": "^6.16.0",
     "@fortawesome/fontawesome-svg-core": "^6.5.2",
     "@fortawesome/free-brands-svg-icons": "^6.5.2",
     "@fortawesome/free-solid-svg-icons": "^6.4.2",
     "@fortawesome/react-fontawesome": "^0.2.0",
-    "@headlessui/react": "^1.7.18",
+    "@headlessui/react": "^1.7.19",
     "@headlessui/tailwindcss": "^0.2.0",
-    "@iarna/toml": "^2.2.5",
-    "@kittycad/lib": "^0.0.56",
+    "@kittycad/lib": "^0.0.60",
     "@lezer/javascript": "^1.4.9",
     "@open-rpc/client-js": "^1.8.1",
     "@react-hook/resize-observer": "^1.2.6",
     "@replit/codemirror-interact": "^6.3.1",
-    "@tauri-apps/api": "2.0.0-beta.7",
+    "@tauri-apps/api": "2.0.0-beta.8",
     "@tauri-apps/plugin-dialog": "^2.0.0-beta.2",
     "@tauri-apps/plugin-fs": "^2.0.0-beta.2",
     "@tauri-apps/plugin-http": "^2.0.0-beta.2",
     "@tauri-apps/plugin-os": "^2.0.0-beta.2",
+    "@tauri-apps/plugin-process": "^2.0.0-beta.2",
     "@tauri-apps/plugin-shell": "^2.0.0-beta.2",
+    "@tauri-apps/plugin-updater": "^2.0.0-beta.2",
     "@testing-library/jest-dom": "^5.14.1",
     "@testing-library/react": "^15.0.2",
     "@testing-library/user-event": "^14.5.2",
@@ -55,7 +56,6 @@
     "sketch-helpers": "^0.0.4",
     "swr": "^2.2.5",
     "three": "^0.163.0",
-    "toml": "^3.0.0",
     "ts-node": "^10.9.2",
     "typescript": "^5.4.5",
     "ua-parser-js": "^1.0.37",
@@ -84,8 +84,9 @@
     "test:e2e:tauri": "E2E_TAURI_ENABLED=true TS_NODE_COMPILER_OPTIONS='{\"module\": \"commonjs\"}' wdio run wdio.conf.ts",
     "simpleserver:ci": "yarn pretest && http-server ./public --cors -p 3000 &",
     "simpleserver": "yarn pretest && http-server ./public --cors -p 3000",
-    "fmt": "prettier --write ./src && prettier --write ./e2e",
-    "fmt-check": "prettier --check ./src && prettier --check ./e2e",
+    "fmt": "prettier --write ./src *.ts *.json *.js ./e2e",
+    "fmt-check": "prettier --check ./src *.ts *.json *.js ./e2e",
+    "fetch:wasm": "./get-latest-wasm-bundle.sh",
     "build:wasm-dev": "(cd src/wasm-lib && wasm-pack build --dev --target web --out-dir pkg && cargo test -p kcl-lib export_bindings) && cp src/wasm-lib/pkg/wasm_lib_bg.wasm public && yarn fmt",
     "build:wasm": "(cd src/wasm-lib && wasm-pack build --target web --out-dir pkg && cargo test -p kcl-lib export_bindings) && cp src/wasm-lib/pkg/wasm_lib_bg.wasm public && yarn fmt",
     "build:wasm-clean": "yarn wasm-prep && yarn build:wasm",
@@ -117,10 +118,12 @@
   "devDependencies": {
     "@babel/plugin-proposal-private-property-in-object": "^7.21.11",
     "@babel/preset-env": "^7.24.3",
-    "@playwright/test": "^1.43.0",
+    "@iarna/toml": "^2.2.5",
+    "@playwright/test": "^1.43.1",
     "@tauri-apps/cli": "^2.0.0-beta.13",
     "@types/crypto-js": "^4.2.2",
     "@types/debounce-promise": "^3.1.9",
+    "@types/mocha": "^10.0.6",
     "@types/pixelmatch": "^5.2.6",
     "@types/pngjs": "^6.0.4",
     "@types/react-modal": "^3.16.3",
@@ -131,11 +134,12 @@
     "@types/wicg-file-system-access": "^2023.10.5",
     "@types/ws": "^8.5.10",
     "@vitejs/plugin-react": "^4.2.1",
+    "@vitest/web-worker": "^1.5.0",
     "@wdio/cli": "^8.24.3",
     "@wdio/globals": "^8.36.0",
-    "@wdio/local-runner": "^8.35.1",
+    "@wdio/local-runner": "^8.36.0",
     "@wdio/mocha-framework": "^8.36.0",
-    "@wdio/spec-reporter": "^8.32.4",
+    "@wdio/spec-reporter": "^8.36.0",
     "@xstate/cli": "^0.5.17",
     "autoprefixer": "^10.4.19",
     "eslint": "^8.57.0",
@@ -150,7 +154,7 @@
     "prettier": "^2.8.0",
     "setimmediate": "^1.0.5",
     "tailwindcss": "^3.4.1",
-    "vite": "^5.2.6",
+    "vite": "^5.2.9",
     "vite-plugin-eslint": "^1.8.1",
     "vite-plugin-package-version": "^1.1.0",
     "vite-tsconfig-paths": "^4.3.2",

playwright.config.ts

@@ -27,7 +27,7 @@ export default defineConfig({
     baseURL: 'http://localhost:3000',
 
     /* Collect trace when retrying the failed test. See https://playwright.dev/docs/trace-viewer */
-    trace: 'on-first-retry',
+    trace: 'retain-on-failure',
   },
 
   /* Configure projects for major browsers */
@@ -49,8 +49,6 @@ export default defineConfig({
     //   use: { ...devices['Desktop Chrome'] },
     // },
 
-
-
     /* Test against mobile viewports. */
     // {
     //   name: 'Mobile Chrome',

public/.well-known/apple-app-site-association

@@ -0,0 +1,15 @@
+{
+  "applinks": {
+    "details": [
+      {
+        "appIDs": ["92H8YB3B95.dev.zoo.modeling-app"],
+        "components": [
+          {
+            "/": "/file/*",
+            "comment": "Matches any URL whose path starts with /file/"
+          }
+        ]
+      }
+    ]
+  }
+}

src-tauri/Cargo.toml

@@ -1,37 +1,44 @@
 [package]
 name = "app"
 version = "0.1.0"
-description = "A Tauri App"
-authors = ["you"]
+description = "The Zoo Modeling App"
+authors = ["Zoo Engineers <eng@zoo.dev>"]
 license = ""
 repository = "https://github.com/KittyCAD/modeling-app"
 default-run = "app"
 edition = "2021"
 rust-version = "1.70"
-
 # See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
 
 [build-dependencies]
-tauri-build = { version = "2.0.0-beta.12", features = [] }
+tauri-build = { version = "2.0.0-beta.13", features = [] }
 
 [dependencies]
 anyhow = "1"
-kittycad = "0.2.67"
+kcl-lib = { version = "0.1.53", path = "../src/wasm-lib/kcl" }
+kittycad = "0.3.0"
+log = "0.4.21"
 oauth2 = "4.4.2"
-serde = { version = "1.0", features = ["derive"] }
 serde_json = "1.0"
 tauri = { version = "2.0.0-beta.15", features = [ "devtools", "unstable"] }
-tauri-plugin-dialog = { version = "2.0.0-beta.0" }
-tauri-plugin-fs = { version = "2.0.0-beta.0" }
-tauri-plugin-http = { version = "2.0.0-beta.0" }
-tauri-plugin-os = { version = "2.0.0-beta.0" }
-tauri-plugin-shell = { version = "2.0.0-beta.0" }
-tauri-plugin-updater = { version = "2.0.0-beta.0" }
-tokio = { version = "1.37.0", features = ["time"] }
+tauri-plugin-cli = { version = "2.0.0-beta.3" }
+tauri-plugin-deep-link = { version = "2.0.0-beta.3" }
+tauri-plugin-dialog = { version = "2.0.0-beta.6" }
+tauri-plugin-fs = { version = "2.0.0-beta.6" }
+tauri-plugin-http = { version = "2.0.0-beta.6" }
+tauri-plugin-log = { version = "2.0.0-beta.4" }
+tauri-plugin-os = { version = "2.0.0-beta.2" }
+tauri-plugin-process = { version = "2.0.0-beta.2" }
+tauri-plugin-shell = { version = "2.0.0-beta.2" }
+tauri-plugin-updater = { version = "2.0.0-beta.4" }
+tokio = { version = "1.37.0", features = ["time", "fs", "process"] }
 toml = "0.8.2"
+url = "2.5.0"
 
 [features]
+default = ["updater"]
 # this feature is used for production builds or when `devPath` points to the filesystem and the built-in dev server is disabled.
 # If you use cargo directly instead of tauri's cli you can use this feature flag to switch between tauri's `dev` and `build` modes.
 # DO NOT REMOVE!!
 custom-protocol = ["tauri/custom-protocol"]
+updater = []

src-tauri/Info.plist

@@ -0,0 +1,376 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
+<plist version="1.0">
+    <dict>
+        <key>CFBundleDevelopmentRegion</key>
+        <string>en</string>
+        <key>NSPrincipalClass</key>
+        <string>NSApplication</string>
+        <key>CFBundlePackageType</key>
+        <string>APPL</string>
+        <key>NSDesktopFolderUsageDescription</key>
+        <string>Zoo Modeling App accesses the Desktop to load and save your project files and/or exported files here</string>
+        <key>NSDocumentsFolderUsageDescription</key>
+        <string>Zoo Modeling App accesses the Documents folder to load and save your project files and/or exported files here</string>
+        <key>NSDownloadsFolderUsageDescription</key>
+        <string>Zoo Modeling App accesses the Downloads folder to load and save your project files and/or exported files here</string>
+        <key>ITSAppUsesNonExemptEncryption</key>
+        <false/>
+        <key>DTXcode</key>
+        <string>1501</string>
+        <key>DTXcodeBuild</key>
+        <string>15A507</string>
+        <key>CFBundleURLTypes</key>
+        <array>
+            <dict>
+                <key>CFBundleURLName</key>
+                <string>dev.zoo.modeling-app</string>
+                <key>CFBundleURLSchemes</key>
+                <array>
+                    <string>zoo-modeling-app</string>
+                    <string>zoo</string>
+                </array>
+            </dict>
+        </array>
+        <key>LSFileQuarantineEnabled</key>
+        <false/>
+        <key>CFBundleDocumentTypes</key>
+        <array>
+            <dict>
+                <key>LSItemContentTypes</key>
+                <array>
+                    <string>dev.zoo.kcl</string>
+                </array>
+                <key>CFBundleTypeName</key>
+                <string>KCL</string>
+                <key>CFBundleTypeRole</key>
+                <string>Editor</string>
+                <key>LSTypeIsPackage</key>
+                <false/>
+                <key>LSHandlerRank</key>
+                <string>Owner</string>
+            </dict>
+            <dict>
+                <key>LSItemContentTypes</key>
+                <array>
+                    <string>dev.zoo.toml</string>
+                </array>
+                <key>CFBundleTypeName</key>
+                <string>TOML</string>
+                <key>CFBundleTypeRole</key>
+                <string>Editor</string>
+                <key>LSTypeIsPackage</key>
+                <false/>
+                <key>LSHandlerRank</key>
+                <string>Default</string>
+            </dict>
+            <dict>
+                <key>LSItemContentTypes</key>
+                <array>
+                    <string>dev.zoo.gltf</string>
+                </array>
+                <key>CFBundleTypeName</key>
+                <string>glTF</string>
+                <key>CFBundleTypeRole</key>
+                <string>Editor</string>
+                <key>LSTypeIsPackage</key>
+                <false/>
+                <key>LSHandlerRank</key>
+                <string>Default</string>
+            </dict>
+            <dict>
+                <key>LSItemContentTypes</key>
+                <array>
+                    <string>dev.zoo.glb</string>
+                </array>
+                <key>CFBundleTypeName</key>
+                <string>glb</string>
+                <key>CFBundleTypeRole</key>
+                <string>Editor</string>
+                <key>LSTypeIsPackage</key>
+                <false/>
+                <key>LSHandlerRank</key>
+                <string>Default</string>
+            </dict>
+            <dict>
+                <key>LSItemContentTypes</key>
+                <array>
+                    <string>dev.zoo.step</string>
+                </array>
+                <key>CFBundleTypeName</key>
+                <string>STEP</string>
+                <key>CFBundleTypeRole</key>
+                <string>Editor</string>
+                <key>LSTypeIsPackage</key>
+                <false/>
+                <key>LSHandlerRank</key>
+                <string>Default</string>
+            </dict>
+            <dict>
+                <key>LSItemContentTypes</key>
+                <array>
+                    <string>dev.zoo.fbx</string>
+                </array>
+                <key>CFBundleTypeName</key>
+                <string>FBX</string>
+                <key>CFBundleTypeRole</key>
+                <string>Editor</string>
+                <key>LSTypeIsPackage</key>
+                <false/>
+                <key>LSHandlerRank</key>
+                <string>Default</string>
+            </dict>
+            <dict>
+                <key>LSItemContentTypes</key>
+                <array>
+                    <string>dev.zoo.sldprt</string>
+                </array>
+                <key>CFBundleTypeName</key>
+                <string>Solidworks Part</string>
+                <key>CFBundleTypeRole</key>
+                <string>Viewer</string>
+                <key>LSTypeIsPackage</key>
+                <false/>
+                <key>LSHandlerRank</key>
+                <string>Default</string>
+            </dict>
+            <dict>
+                <key>LSItemContentTypes</key>
+                <array>
+                    <string>public.geometry-definition-format</string>
+                </array>
+                <key>CFBundleTypeName</key>
+                <string>OBJ</string>
+                <key>CFBundleTypeRole</key>
+                <string>Editor</string>
+                <key>LSTypeIsPackage</key>
+                <false/>
+                <key>LSHandlerRank</key>
+                <string>Default</string>
+            </dict>
+            <dict>
+                <key>LSItemContentTypes</key>
+                <array>
+                    <string>public.polygon-file-format</string>
+                </array>
+                <key>CFBundleTypeName</key>
+                <string>PLY</string>
+                <key>CFBundleTypeRole</key>
+                <string>Editor</string>
+                <key>LSTypeIsPackage</key>
+                <false/>
+                <key>LSHandlerRank</key>
+                <string>Default</string>
+            </dict>
+            <dict>
+                <key>LSItemContentTypes</key>
+                <array>
+                    <string>public.standard-tesselated-geometry-format</string>
+                </array>
+                <key>CFBundleTypeName</key>
+                <string>STL</string>
+                <key>CFBundleTypeRole</key>
+                <string>Editor</string>
+                <key>LSTypeIsPackage</key>
+                <false/>
+                <key>LSHandlerRank</key>
+                <string>Default</string>
+            </dict>
+            <dict>
+                <key>LSItemContentTypes</key>
+                <array>
+                    <string>public.folder</string>
+                </array>
+                <key>CFBundleTypeName</key>
+                <string>Folders</string>
+                <key>CFBundleTypeRole</key>
+                <string>Viewer</string>
+                <key>LSHandlerRank</key>
+                <string>Alternate</string>
+            </dict>
+        </array>
+        <key>UTExportedTypeDeclarations</key>
+        <array>
+            <dict>
+                <key>UTTypeIdentifier</key>
+                <string>dev.zoo.kcl</string>
+                <key>UTTypeReferenceURL</key>
+                <string>https://zoo.dev/docs/kcl</string>
+                <key>UTTypeConformsTo</key>
+                <array>
+                    <string>public.source-code</string>
+                    <string>public.data</string>
+                    <string>public.text</string>
+                    <string>public.plain-text</string>
+                    <string>public.3d-content</string>
+                    <string>public.script</string>
+                </array>
+                <key>UTTypeDescription</key>
+                <string>KCL (KittyCAD Language) document</string>
+                <key>UTTypeTagSpecification</key>
+                <dict>
+                    <key>public.filename-extension</key>
+                    <array>
+                        <string>kcl</string>
+                    </array>
+                    <key>public.mime-type</key>
+                    <array>
+                        <string>text/vnd.zoo.kcl</string>
+                    </array>
+                </dict>
+            </dict>
+            <dict>
+                <key>UTTypeIdentifier</key>
+                <string>dev.zoo.gltf</string>
+                <key>UTTypeReferenceURL</key>
+                <string>https://registry.khronos.org/glTF/specs/2.0/glTF-2.0.html</string>
+                <key>UTTypeConformsTo</key>
+                <array>
+                    <string>public.data</string>
+                    <string>public.text</string>
+                    <string>public.plain-text</string>
+                    <string>public.3d-content</string>
+                    <string>public.json</string>
+                </array>
+                <key>UTTypeDescription</key>
+                <string>Graphics Library Transmission Format (glTF)</string>
+                <key>UTTypeTagSpecification</key>
+                <dict>
+                    <key>public.filename-extension</key>
+                    <array>
+                        <string>gltf</string>
+                    </array>
+                    <key>public.mime-type</key>
+                    <array>
+                        <string>model/gltf+json</string>
+                    </array>
+                </dict>
+            </dict>
+            <dict>
+                <key>UTTypeIdentifier</key>
+                <string>dev.zoo.glb</string>
+                <key>UTTypeReferenceURL</key>
+                <string>https://registry.khronos.org/glTF/specs/2.0/glTF-2.0.html</string>
+                <key>UTTypeConformsTo</key>
+                <array>
+                    <string>public.data</string>
+                    <string>public.3d-content</string>
+                </array>
+                <key>UTTypeDescription</key>
+                <string>Graphics Library Transmission Format (glTF) binary</string>
+                <key>UTTypeTagSpecification</key>
+                <dict>
+                    <key>public.filename-extension</key>
+                    <array>
+                        <string>glb</string>
+                    </array>
+                    <key>public.mime-type</key>
+                    <array>
+                        <string>model/gltf-binary</string>
+                    </array>
+                </dict>
+            </dict>
+            <dict>
+                <key>UTTypeIdentifier</key>
+                <string>dev.zoo.step</string>
+                <key>UTTypeReferenceURL</key>
+                <string>https://www.loc.gov/preservation/digital/formats/fdd/fdd000448.shtml</string>
+                <key>UTTypeConformsTo</key>
+                <array>
+                    <string>public.data</string>
+                    <string>public.3d-content</string>
+                    <string>public.text</string>
+                    <string>public.plain-text</string>
+                </array>
+                <key>UTTypeDescription</key>
+                <string>STEP-file, ISO 10303-21</string>
+                <key>UTTypeTagSpecification</key>
+                <dict>
+                    <key>public.filename-extension</key>
+                    <array>
+                        <string>step</string>
+                        <string>stp</string>
+                    </array>
+                    <key>public.mime-type</key>
+                    <array>
+                        <string>model/step</string>
+                    </array>
+                </dict>
+            </dict>
+            <dict>
+                <key>UTTypeIdentifier</key>
+                <string>dev.zoo.sldprt</string>
+                <key>UTTypeReferenceURL</key>
+                <string>https://docs.fileformat.com/cad/sldprt/</string>
+                <key>UTTypeConformsTo</key>
+                <array>
+                    <string>public.data</string>
+                    <string>public.3d-content</string>
+                </array>
+                <key>UTTypeDescription</key>
+                <string>Solidworks Part</string>
+                <key>UTTypeTagSpecification</key>
+                <dict>
+                    <key>public.filename-extension</key>
+                    <array>
+                        <string>sldprt</string>
+                    </array>
+                    <key>public.mime-type</key>
+                    <array>
+                        <string>model/vnd.solidworks.sldprt</string>
+                    </array>
+                </dict>
+            </dict>
+            <dict>
+                <key>UTTypeIdentifier</key>
+                <string>dev.zoo.fbx</string>
+                <key>UTTypeReferenceURL</key>
+                <string>https://en.wikipedia.org/wiki/FBX</string>
+                <key>UTTypeConformsTo</key>
+                <array>
+                    <string>public.data</string>
+                    <string>public.3d-content</string>
+                </array>
+                <key>UTTypeDescription</key>
+                <string>Autodesk Filmbox (FBX) format</string>
+                <key>UTTypeTagSpecification</key>
+                <dict>
+                    <key>public.filename-extension</key>
+                    <array>
+                        <string>fbx</string>
+                        <string>fbxb</string>
+                    </array>
+                    <key>public.mime-type</key>
+                    <array>
+                        <string>model/vnd.autodesk.fbx</string>
+                    </array>
+                </dict>
+            </dict>
+            <dict>
+                <key>UTTypeIdentifier</key>
+                <string>dev.zoo.toml</string>
+                <key>UTTypeReferenceURL</key>
+                <string>https://toml.io/en/</string>
+                <key>UTTypeConformsTo</key>
+                <array>
+                    <string>public.data</string>
+                    <string>public.text</string>
+                    <string>public.plain-text</string>
+                </array>
+                <key>UTTypeDescription</key>
+                <string>Tom's Obvious Minimal Language</string>
+                <key>UTTypeTagSpecification</key>
+                <dict>
+                    <key>public.filename-extension</key>
+                    <array>
+                        <string>kcl</string>
+                    </array>
+                    <key>public.mime-type</key>
+                    <array>
+                        <string>text/toml</string>
+                    </array>
+                </dict>
+            </dict>
+        </array>
+    </dict>
+</plist>

src-tauri/capabilities/desktop.json

@@ -7,6 +7,9 @@
     "main"
   ],
   "permissions": [
+    "cli:default",
+    "deep-link:default",
+    "log:default",
     "path:default",
     "event:default",
     "window:default",
@@ -23,7 +26,6 @@
     "fs:allow-copy-file",
     "fs:allow-mkdir",
     "fs:allow-remove",
-    "fs:allow-remove",
     "fs:allow-rename",
     "fs:allow-exists",
     "fs:allow-stat",
@@ -77,7 +79,9 @@
     "os:allow-arch",
     "os:allow-exe-extension",
     "os:allow-locale",
-    "os:allow-hostname"
+    "os:allow-hostname",
+    "process:allow-restart",
+    "updater:default"
   ],
   "platforms": [
     "linux",

src-tauri/entitlements/app-store.entitlements

@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
+<plist version="1.0">
+    <dict>
+        <key>com.apple.security.app-sandbox</key>
+        <true/>
+        <key>com.apple.security.network.server</key>
+        <true/>
+        <key>com.apple.security.network.client</key>
+        <true/>
+        <key>com.apple.security.files.user-selected.read-write</key>
+        <true/>
+        <key>com.apple.security.files.downloads.read-write</key>
+        <true/>
+        <key>com.apple.application-identifier</key>
+        <string>92H8YB3B95.dev.zoo.modeling-app</string>
+        <key>com.apple.developer.team-identifier</key>
+        <string>92H8YB3B95</string>
+        <key>com.apple.developer.associated-domains</key>
+        <array>
+            <string>applinks:app.zoo.dev</string>
+        </array>
+    </dict>
+</plist>