Update test snaps

Both the Lego brick base, the first bump, and the second bump are all ExtrudeGroups. They all share the same ID -- the ID of the original path that formed the base of the brick.

When running a pattern on the lego *bump* (not the lego *base*), the pattern target ID is the extrude group ID. But like I said, that's the same ID as the rest of the entire extrude! So whether you pattern the base or the brick, the result will be the same -- the entire extrude gets patterned.

Solution: send the ID of the original sketch group (either base or bump)

.github/workflows/cargo-test.yml

@@ -2,28 +2,8 @@ on:
   push:
     branches:
       - main
-    paths:
-      - 'src/wasm-lib/**.rs'
-      - 'src/wasm-lib/**.hbs'
-      - 'src/wasm-lib/**.gen'
-      - 'src/wasm-lib/**.snap'
-      - '**/Cargo.toml'
-      - '**/Cargo.lock'
-      - '**/rust-toolchain.toml'
-      - 'src/wasm-lib/**.kcl'
-      - .github/workflows/cargo-test.yml
 
   pull_request:
-    paths:
-      - 'src/wasm-lib/**.rs'
-      - 'src/wasm-lib/**.hbs'
-      - 'src/wasm-lib/**.gen'
-      - 'src/wasm-lib/**.snap'
-      - '**/Cargo.toml'
-      - '**/Cargo.lock'
-      - '**/rust-toolchain.toml'
-      - 'src/wasm-lib/**.kcl'
-      - .github/workflows/cargo-test.yml
   workflow_dispatch:
 permissions: read-all
 concurrency:
@@ -71,7 +51,7 @@ jobs:
           KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN}}
           RUST_MIN_STACK: 10485760000
       - name: Upload to codecov.io
-        uses: codecov/codecov-action@v4
+        uses: codecov/codecov-action@v5
         with:
           token: ${{secrets.CODECOV_TOKEN}}
           fail_ci_if_error: true

docs/kcl/index.md

@@ -30,6 +30,7 @@ layout: manual
 * [`assertLessThan`](kcl/assertLessThan)
 * [`assertLessThanOrEq`](kcl/assertLessThanOrEq)
 * [`atan`](kcl/atan)
+* [`atan2`](kcl/atan2)
 * [`bezierCurve`](kcl/bezierCurve)
 * [`ceil`](kcl/ceil)
 * [`chamfer`](kcl/chamfer)
@@ -102,6 +103,7 @@ layout: manual
 * [`startProfileAt`](kcl/startProfileAt)
 * [`startSketchAt`](kcl/startSketchAt)
 * [`startSketchOn`](kcl/startSketchOn)
+* [`sweep`](kcl/sweep)
 * [`tan`](kcl/tan)
 * [`tangentToEnd`](kcl/tangentToEnd)
 * [`tangentialArc`](kcl/tangentialArc)

docs/kcl/reduce.md

@@ -43,7 +43,7 @@ fn sum(arr) {
 
 /* The above is basically like this pseudo-code:
 fn sum(arr):
-    let sumSoFar = 0
+    sumSoFar = 0
     for i in arr:
         sumSoFar = add(sumSoFar, i)
     return sumSoFar */
@@ -96,14 +96,14 @@ fn decagon(radius) {
 
 /* The `decagon` above is basically like this pseudo-code:
 fn decagon(radius):
-    let stepAngle = (1/10) * tau()
-    let startOfDecagonSketch = startSketchAt([(cos(0)*radius), (sin(0) * radius)])
+    stepAngle = (1/10) * tau()
+    startOfDecagonSketch = startSketchAt([(cos(0)*radius), (sin(0) * radius)])
 
     // Here's the reduce part.
-    let partialDecagon = startOfDecagonSketch
+    partialDecagon = startOfDecagonSketch
     for i in [1..10]:
-        let x = cos(stepAngle * i) * radius
-        let y = sin(stepAngle * i) * radius
+        x = cos(stepAngle * i) * radius
+        y = sin(stepAngle * i) * radius
         partialDecagon = lineTo([x, y], partialDecagon)
     fullDecagon = partialDecagon // it's now full
     return fullDecagon */

docs/kcl/types/KclNone.md

@@ -12,5 +12,10 @@ KCL value for an optional parameter which was not given an argument. (remember,
 
 
 
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `digest` |`[, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`, `integer`]`|  | No |
 
 

docs/kcl/types/Sketch.md

@@ -21,6 +21,7 @@ A sketch is a collection of paths.
 | `on` |[`SketchSurface`](/docs/kcl/types/SketchSurface)| What the sketch is on (can be a plane or a face). | No |
 | `start` |[`BasePath`](/docs/kcl/types/BasePath)| The starting path. | No |
 | `tags` |`object`| Tag identifiers that have been declared in this sketch. | No |
+| `originalId` |`string`| The original id of the sketch. This stays the same even if the sketch is sketched on face etc. | No |
 | `__meta` |`[` [`Metadata`](/docs/kcl/types/Metadata) `]`| Metadata. | No |
 
 

docs/kcl/types/SketchSet.md

@@ -30,6 +30,7 @@ A sketch is a collection of paths.
 | `on` |[`SketchSurface`](/docs/kcl/types/SketchSurface)| What the sketch is on (can be a plane or a face). | No |
 | `start` |[`BasePath`](/docs/kcl/types/BasePath)| The starting path. | No |
 | `tags` |`object`| Tag identifiers that have been declared in this sketch. | No |
+| `originalId` |`string`| The original id of the sketch. This stays the same even if the sketch is sketched on face etc. | No |
 | `__meta` |`[` [`Metadata`](/docs/kcl/types/Metadata) `]`| Metadata. | No |
 
 

docs/kcl/types/SweepData.md

@@ -0,0 +1,23 @@
+---
+title: "SweepData"
+excerpt: "Data for a sweep."
+layout: manual
+---
+
+Data for a sweep.
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `path` |[`Sketch`](/docs/kcl/types/Sketch)| The path to sweep along. | No |
+| `sectional` |`boolean`| If true, the sweep will be broken up into sub-sweeps (extrusions, revolves, sweeps) based on the trajectory path components. | No |
+| `tolerance` |`number`| Tolerance for the sweep operation. | No |
+
+

e2e/playwright/basic-sketch.spec.ts

@@ -57,23 +57,26 @@ async function doBasicSketch(page: Page, openPanes: string[]) {
   const startXPx = 600
   await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
   if (openPanes.includes('code')) {
-    await expect(u.codeLocator).toHaveText(`sketch001 = startSketchOn('XZ')
-  |> startProfileAt(${commonPoints.startAt}, %)`)
+    await expect(u.codeLocator).toContainText(
+      `sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${commonPoints.startAt}, sketch001)`
+    )
   }
   await page.waitForTimeout(500)
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
   await page.waitForTimeout(500)
 
   if (openPanes.includes('code')) {
-    await expect(u.codeLocator).toHaveText(`sketch001 = startSketchOn('XZ')
-  |> startProfileAt(${commonPoints.startAt}, %)
+    await expect(u.codeLocator)
+      .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${commonPoints.startAt}, sketch001)
   |> xLine(${commonPoints.num1}, %)`)
   }
   await page.waitForTimeout(500)
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 20)
   if (openPanes.includes('code')) {
-    await expect(u.codeLocator).toHaveText(`sketch001 = startSketchOn('XZ')
-  |> startProfileAt(${commonPoints.startAt}, %)
+    await expect(u.codeLocator)
+      .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${
+      commonPoints.startAt
+    }, sketch001)
   |> xLine(${commonPoints.num1}, %)
   |> yLine(${commonPoints.num1 + 0.01}, %)`)
   } else {
@@ -82,8 +85,10 @@ async function doBasicSketch(page: Page, openPanes: string[]) {
   await page.waitForTimeout(200)
   await page.mouse.click(startXPx, 500 - PUR * 20)
   if (openPanes.includes('code')) {
-    await expect(u.codeLocator).toHaveText(`sketch001 = startSketchOn('XZ')
-  |> startProfileAt(${commonPoints.startAt}, %)
+    await expect(u.codeLocator)
+      .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${
+      commonPoints.startAt
+    }, sketch001)
   |> xLine(${commonPoints.num1}, %)
   |> yLine(${commonPoints.num1 + 0.01}, %)
   |> xLine(${commonPoints.num2 * -1}, %)`)
@@ -140,8 +145,10 @@ async function doBasicSketch(page: Page, openPanes: string[]) {
 
   // Open the code pane.
   await u.openKclCodePanel()
-  await expect(u.codeLocator).toHaveText(`sketch001 = startSketchOn('XZ')
-  |> startProfileAt(${commonPoints.startAt}, %)
+  await expect(u.codeLocator)
+    .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${
+    commonPoints.startAt
+  }, sketch001)
   |> xLine(${commonPoints.num1}, %, $seg01)
   |> yLine(${commonPoints.num1 + 0.01}, %)
   |> xLine(-segLen(seg01), %)`)

e2e/playwright/can-create-sketches-on-all-planes-and-their-back-sides.spec.ts

@@ -44,8 +44,7 @@ test.describe('Can create sketches on all planes and their back sides', () => {
       },
     }
 
-    const code = `sketch001 = startSketchOn('${plane}')
-    |> startProfileAt([0.9, -1.22], %)`
+    const code = `sketch001 = startSketchOn('${plane}')profile001 = startProfileAt([0.9, -1.22], sketch001)`
 
     await u.openDebugPanel()
 

e2e/playwright/editor-tests.spec.ts

@@ -94,6 +94,51 @@ test.describe('Editor tests', () => {
     |> close(%)`)
   })
 
+  test('ensure we use the cache, and do not re-execute', async ({ page }) => {
+    const u = await getUtils(page)
+    await page.setViewportSize({ width: 1000, height: 500 })
+
+    await u.waitForAuthSkipAppStart()
+
+    await u.codeLocator.click()
+    await page.keyboard.type(`sketch001 = startSketchOn('XY')
+  |> startProfileAt([-10, -10], %)
+  |> line([20, 0], %)
+  |> line([0, 20], %)
+  |> line([-20, 0], %)
+  |> close(%)`)
+
+    // Ensure we execute the first time.
+    await u.openDebugPanel()
+    await expect(
+      page.locator('[data-receive-command-type="scene_clear_all"]')
+    ).toHaveCount(2)
+    await expect(
+      page.locator('[data-message-type="execution-done"]')
+    ).toHaveCount(2)
+
+    // Add whitespace to the end of the code.
+    await u.codeLocator.click()
+    await page.keyboard.press('ArrowUp')
+    await page.keyboard.press('ArrowUp')
+    await page.keyboard.press('ArrowUp')
+    await page.keyboard.press('ArrowUp')
+    await page.keyboard.press('Home')
+    await page.keyboard.type('    ')
+    await page.keyboard.press('Enter')
+    await page.keyboard.type('    ')
+
+    // Ensure we don't execute the second time.
+    await u.openDebugPanel()
+    // Make sure we didn't clear the scene.
+    await expect(
+      page.locator('[data-message-type="execution-done"]')
+    ).toHaveCount(3)
+    await expect(
+      page.locator('[data-receive-command-type="scene_clear_all"]')
+    ).toHaveCount(2)
+  })
+
   test('if you click the format button it formats your code and executes so lints are still there', async ({
     page,
   }) => {

e2e/playwright/fixtures/sceneFixture.ts

@@ -11,6 +11,7 @@ import {
 
 type mouseParams = {
   pixelDiff?: number
+  shouldDbClick?: boolean
 }
 type mouseDragToParams = mouseParams & {
   fromPoint: { x: number; y: number }
@@ -75,11 +76,16 @@ export class SceneFixture {
         if (clickParams?.pixelDiff) {
           return doAndWaitForImageDiff(
             this.page,
-            () => this.page.mouse.click(x, y),
+            () =>
+              clickParams?.shouldDbClick
+                ? this.page.mouse.dblclick(x, y)
+                : this.page.mouse.click(x, y),
             clickParams.pixelDiff
           )
         }
-        return this.page.mouse.click(x, y)
+        return clickParams?.shouldDbClick
+          ? this.page.mouse.dblclick(x, y)
+          : this.page.mouse.click(x, y)
       },
       (moveParams?: mouseParams) => {
         if (moveParams?.pixelDiff) {
@@ -210,27 +216,11 @@ export class SceneFixture {
   }
 
   expectPixelColor = async (
-    colour: [number, number, number],
+    colour: [number, number, number] | [number, number, number][],
     coords: { x: number; y: number },
     diff: number
   ) => {
-    let finalValue = colour
-    await expect
-      .poll(async () => {
-        const pixel = (await getPixelRGBs(this.page)(coords, 1))[0]
-        if (!pixel) return null
-        finalValue = pixel
-        return pixel.every(
-          (channel, index) => Math.abs(channel - colour[index]) < diff
-        )
-      })
-      .toBeTruthy()
-      .catch((cause) => {
-        throw new Error(
-          `ExpectPixelColor: expecting ${colour} got ${finalValue}`,
-          { cause }
-        )
-      })
+    await expectPixelColor(this.page, colour, coords, diff)
   }
 
   get gizmo() {
@@ -246,3 +236,42 @@ export class SceneFixture {
     await buttonToTest.click()
   }
 }
+
+function isColourArray(
+  colour: [number, number, number] | [number, number, number][]
+): colour is [number, number, number][] {
+  return Array.isArray(colour[0])
+}
+
+export async function expectPixelColor(
+  page: Page,
+  colour: [number, number, number] | [number, number, number][],
+  coords: { x: number; y: number },
+  diff: number
+) {
+  let finalValue = colour
+  await expect
+    .poll(
+      async () => {
+        const pixel = (await getPixelRGBs(page)(coords, 1))[0]
+        if (!pixel) return null
+        finalValue = pixel
+        if (!isColourArray(colour)) {
+          return pixel.every(
+            (channel, index) => Math.abs(channel - colour[index]) < diff
+          )
+        }
+        return colour.some((c) =>
+          c.every((channel, index) => Math.abs(pixel[index] - channel) < diff)
+        )
+      },
+      { timeout: 10_000 }
+    )
+    .toBeTruthy()
+    .catch((cause) => {
+      throw new Error(
+        `ExpectPixelColor: expecting ${colour} got ${finalValue}`,
+        { cause }
+      )
+    })
+}

e2e/playwright/fixtures/toolbarFixture.ts

@@ -11,7 +11,10 @@ export class ToolbarFixture {
   offsetPlaneButton!: Locator
   startSketchBtn!: Locator
   lineBtn!: Locator
+  tangentialArcBtn!: Locator
+  circleBtn!: Locator
   rectangleBtn!: Locator
+  lengthConstraintBtn!: Locator
   exitSketchBtn!: Locator
   editSketchBtn!: Locator
   fileTreeBtn!: Locator
@@ -33,7 +36,10 @@ export class ToolbarFixture {
     this.offsetPlaneButton = page.getByTestId('plane-offset')
     this.startSketchBtn = page.getByTestId('sketch')
     this.lineBtn = page.getByTestId('line')
+    this.tangentialArcBtn = page.getByTestId('tangential-arc')
+    this.circleBtn = page.getByTestId('circle-center')
     this.rectangleBtn = page.getByTestId('corner-rectangle')
+    this.lengthConstraintBtn = page.getByTestId('constraint-length')
     this.exitSketchBtn = page.getByTestId('sketch-exit')
     this.editSketchBtn = page.getByText('Edit Sketch')
     this.fileTreeBtn = page.locator('[id="files-button-holder"]')
@@ -91,4 +97,13 @@ export class ToolbarFixture {
       await expect(this.exeIndicator).toBeVisible({ timeout: 15_000 })
     }
   }
+  selectCenterRectangle = async () => {
+    await this.page
+      .getByRole('button', { name: 'caret down Corner rectangle:' })
+      .click()
+    await expect(
+      this.page.getByTestId('dropdown-center-rectangle')
+    ).toBeVisible()
+    await this.page.getByTestId('dropdown-center-rectangle').click()
+  }
 }

e2e/playwright/onboarding-tests.spec.ts

@@ -19,6 +19,7 @@ import {
   TEST_SETTINGS_ONBOARDING_USER_MENU,
 } from './storageStates'
 import * as TOML from '@iarna/toml'
+import { expectPixelColor } from './fixtures/sceneFixture'
 
 test.beforeEach(async ({ context, page }, testInfo) => {
   if (testInfo.tags.includes('@electron')) {
@@ -45,7 +46,7 @@ test.describe('Onboarding tests', () => {
       { settingsKey: TEST_SETTINGS_KEY }
     )
 
-    await page.setViewportSize({ width: 1200, height: 500 })
+    await page.setViewportSize({ width: 1200, height: 1000 })
 
     await u.waitForAuthSkipAppStart()
 
@@ -54,6 +55,12 @@ test.describe('Onboarding tests', () => {
 
     // *and* that the code is shown in the editor
     await expect(page.locator('.cm-content')).toContainText('// Shelf Bracket')
+
+    // Make sure the model loaded
+    const XYPlanePoint = { x: 774, y: 116 } as const
+    const modelColor: [number, number, number] = [45, 45, 45]
+    await page.mouse.move(XYPlanePoint.x, XYPlanePoint.y)
+    expect(await u.getGreatestPixDiff(XYPlanePoint, modelColor)).toBeLessThan(8)
   })
 
   test(
@@ -72,7 +79,7 @@ test.describe('Onboarding tests', () => {
 
       const u = await getUtils(page)
 
-      const viewportSize = { width: 1200, height: 500 }
+      const viewportSize = { width: 1200, height: 1000 }
       await page.setViewportSize(viewportSize)
 
       await test.step(`Create a project and open to the onboarding`, async () => {
@@ -92,6 +99,14 @@ test.describe('Onboarding tests', () => {
         await expect(page.locator('.cm-content')).toContainText(
           '// Shelf Bracket'
         )
+
+        // TODO: jess make less shit
+        // Make sure the model loaded
+        //const XYPlanePoint = { x: 986, y: 522 } as const
+        //const modelColor: [number, number, number] = [76, 76, 76]
+        //await page.mouse.move(XYPlanePoint.x, XYPlanePoint.y)
+
+        //await expectPixelColor(page, modelColor, XYPlanePoint, 8)
       })
 
       await electronApp.close()
@@ -108,7 +123,7 @@ test.describe('Onboarding tests', () => {
     }, initialCode)
 
     const u = await getUtils(page)
-    await page.setViewportSize({ width: 1200, height: 500 })
+    await page.setViewportSize({ width: 1200, height: 1000 })
     await u.waitForAuthSkipAppStart()
 
     // Replay the onboarding
@@ -140,6 +155,12 @@ test.describe('Onboarding tests', () => {
         return localStorage.getItem('persistCode')
       })
     ).toContain('// Shelf Bracket')
+
+    // Make sure the model loaded
+    const XYPlanePoint = { x: 986, y: 522 } as const
+    const modelColor: [number, number, number] = [76, 76, 76]
+    await page.mouse.move(XYPlanePoint.x, XYPlanePoint.y)
+    await expectPixelColor(page, modelColor, XYPlanePoint, 8)
   })
 
   test('Click through each onboarding step', async ({ page }) => {
@@ -179,6 +200,17 @@ test.describe('Onboarding tests', () => {
     // Test that the onboarding pane is gone
     await expect(page.getByTestId('onboarding-content')).not.toBeVisible()
     await expect(page.url()).not.toContain('onboarding')
+
+    await u.openAndClearDebugPanel()
+    await u.expectCmdLog('[data-message-type="execution-done"]')
+    await u.closeDebugPanel()
+
+    // TODO: jess to fix
+    // Make sure the model loaded
+    //const XYPlanePoint = { x: 774, y: 516 } as const
+    // const modelColor: [number, number, number] = [129, 129, 129]
+    // await page.mouse.move(XYPlanePoint.x, XYPlanePoint.y)
+    // await expectPixelColor(page, modelColor, XYPlanePoint, 20)
   })
 
   test('Onboarding redirects and code updating', async ({ page }) => {
@@ -439,7 +471,7 @@ test(
     })
 
     await test.step('Navigate into project', async () => {
-      await page.setViewportSize({ width: 1200, height: 500 })
+      await page.setViewportSize({ width: 1200, height: 1000 })
 
       page.on('console', console.log)
 
@@ -462,7 +494,15 @@ test(
     await test.step('Confirm that the onboarding has restarted', async () => {
       await expect(tutorialProjectIndicator).toBeVisible()
       await expect(tutorialModalText).toBeVisible()
+      // Make sure the model loaded
+      const XYPlanePoint = { x: 988, y: 523 } as const
+      const modelColor: [number, number, number] = [76, 76, 76]
+
+      await page.mouse.move(XYPlanePoint.x, XYPlanePoint.y)
+      await expectPixelColor(page, modelColor, XYPlanePoint, 8)
       await tutorialDismissButton.click()
+      // Make sure model still there.
+      await expectPixelColor(page, modelColor, XYPlanePoint, 8)
     })
 
     await test.step('Clear code and restart onboarding from settings', async () => {

e2e/playwright/point-click.spec.ts

@@ -135,7 +135,9 @@ test.describe('verify sketch on chamfer works', () => {
           pixelDiff: 50,
         })
         await rectangle2ndClick()
-        await editor.expectEditor.toContain(afterRectangle2ndClickSnippet)
+        await editor.expectEditor.toContain(afterRectangle2ndClickSnippet, {
+          shouldNormalise: true,
+        })
       })
 
       await test.step('Clean up so that `_sketchOnAChamfer` util can be called again', async () => {
@@ -177,18 +179,13 @@ test.describe('verify sketch on chamfer works', () => {
 
         afterChamferSelectSnippet:
           'sketch002 = startSketchOn(extrude001, seg03)',
-        afterRectangle1stClickSnippet: 'startProfileAt([205.96, 254.59], %)',
-        afterRectangle2ndClickSnippet: `angledLine([0, 11.39], %, $rectangleSegmentA002)
-    |> angledLine([
-         segAng(rectangleSegmentA002) - 90,
-         105.26
-       ], %, $rectangleSegmentB001)
-    |> angledLine([
-         segAng(rectangleSegmentA002),
-         -segLen(rectangleSegmentA002)
-       ], %, $rectangleSegmentC001)
-    |> lineTo([profileStartX(%), profileStartY(%)], %)
-    |> close(%)`,
+        afterRectangle1stClickSnippet:
+          'startProfileAt([205.96, 254.59], sketch002)',
+        afterRectangle2ndClickSnippet: `angledLine([0,11.39],%,$rectangleSegmentA002)
+        |>angledLine([segAng(rectangleSegmentA002)-90,105.26],%)
+        |>angledLine([segAng(rectangleSegmentA002),-segLen(rectangleSegmentA002)],%)
+        |>lineTo([profileStartX(%),profileStartY(%)],%)
+        |>close(%)`,
       })
 
       await sketchOnAChamfer({
@@ -209,19 +206,15 @@ test.describe('verify sketch on chamfer works', () => {
 
         afterChamferSelectSnippet:
           'sketch003 = startSketchOn(extrude001, seg04)',
-        afterRectangle1stClickSnippet: 'startProfileAt([-209.64, 255.28], %)',
-        afterRectangle2ndClickSnippet: `angledLine([0, 11.56], %, $rectangleSegmentA003)
-    |> angledLine([
-         segAng(rectangleSegmentA003) - 90,
-         106.84
-       ], %, $rectangleSegmentB002)
-    |> angledLine([
-         segAng(rectangleSegmentA003),
-         -segLen(rectangleSegmentA003)
-       ], %, $rectangleSegmentC002)
-    |> lineTo([profileStartX(%), profileStartY(%)], %)
-    |> close(%)`,
+        afterRectangle1stClickSnippet:
+          'startProfileAt([-209.64, 255.28], sketch003)',
+        afterRectangle2ndClickSnippet: `angledLine([0,11.56],%,$rectangleSegmentA003)
+        |>angledLine([segAng(rectangleSegmentA003)-90,106.84],%)
+        |>angledLine([segAng(rectangleSegmentA003),-segLen(rectangleSegmentA003)],%)
+        |>lineTo([profileStartX(%),profileStartY(%)],%)
+        |>close(%)`,
       })
+
       await sketchOnAChamfer({
         clickCoords: { x: 677, y: 87 },
         cameraPos: { x: -6200, y: 1500, z: 6200 },
@@ -234,19 +227,14 @@ test.describe('verify sketch on chamfer works', () => {
          ]
        }, %)`,
         afterChamferSelectSnippet:
-          'sketch003 = startSketchOn(extrude001, seg04)',
-        afterRectangle1stClickSnippet: 'startProfileAt([-209.64, 255.28], %)',
-        afterRectangle2ndClickSnippet: `angledLine([0, 11.56], %, $rectangleSegmentA003)
-    |> angledLine([
-         segAng(rectangleSegmentA003) - 90,
-         106.84
-       ], %, $rectangleSegmentB002)
-    |> angledLine([
-         segAng(rectangleSegmentA003),
-         -segLen(rectangleSegmentA003)
-       ], %, $rectangleSegmentC002)
-    |> lineTo([profileStartX(%), profileStartY(%)], %)
-    |> close(%)`,
+          'sketch004 = startSketchOn(extrude001, seg05)',
+        afterRectangle1stClickSnippet:
+          'startProfileAt([82.57, 322.96], sketch004)',
+        afterRectangle2ndClickSnippet: `angledLine([0,11.16],%,$rectangleSegmentA004)
+        |>angledLine([segAng(rectangleSegmentA004)-90,103.07],%)
+        |>angledLine([segAng(rectangleSegmentA004),-segLen(rectangleSegmentA004)],%)
+        |>lineTo([profileStartX(%),profileStartY(%)],%)|
+        >close(%)`,
       })
       /// last one
       await sketchOnAChamfer({
@@ -259,25 +247,18 @@ test.describe('verify sketch on chamfer works', () => {
        }, %)`,
         afterChamferSelectSnippet:
           'sketch005 = startSketchOn(extrude001, seg06)',
-        afterRectangle1stClickSnippet: 'startProfileAt([-23.43, 19.69], %)',
-        afterRectangle2ndClickSnippet: `angledLine([0, 9.1], %, $rectangleSegmentA005)
-
-    |> angledLine([
-         segAng(rectangleSegmentA005) - 90,
-         84.07
-       ], %, $rectangleSegmentB004)
-    |> angledLine([
-         segAng(rectangleSegmentA005),
-         -segLen(rectangleSegmentA005)
-       ], %, $rectangleSegmentC004)
-    |> lineTo([profileStartX(%), profileStartY(%)], %)
-    |> close(%)`,
+        afterRectangle1stClickSnippet:
+          'startProfileAt([-23.43, 19.69], sketch005)',
+        afterRectangle2ndClickSnippet: `angledLine([0,9.1],%,$rectangleSegmentA005)
+        |>angledLine([segAng(rectangleSegmentA005)-90,84.07],%)
+        |>angledLine([segAng(rectangleSegmentA005),-segLen(rectangleSegmentA005)],%)
+        |>lineTo([profileStartX(%),profileStartY(%)],%)
+        |>close(%)`,
       })
 
       await test.step('verify at the end of the test that final code is what is expected', async () => {
         await editor.expectEditor.toContain(
           `sketch001 = startSketchOn('XZ')
-
   |> startProfileAt([75.8, 317.2], %) // [$startCapTag, $EndCapTag]
   |> angledLine([0, 268.43], %, $rectangleSegmentA001)
   |> angledLine([
@@ -290,7 +271,7 @@ test.describe('verify sketch on chamfer works', () => {
      ], %, $yo)
   |> lineTo([profileStartX(%), profileStartY(%)], %, $seg02)
   |> close(%)
-    extrude001 = extrude(100, sketch001)
+extrude001 = extrude(100, sketch001)
   |> chamfer({
        length = 30,
        tags = [getOppositeEdge(seg01)]
@@ -304,59 +285,59 @@ test.describe('verify sketch on chamfer works', () => {
        length = 30,
        tags = [getNextAdjacentEdge(yo)]
      }, %, $seg06)
-    sketch005 = startSketchOn(extrude001, seg06)
-      |> startProfileAt([-23.43, 19.69], %)
+sketch005 = startSketchOn(extrude001, seg06)
+profile004 = startProfileAt([-23.43, 19.69], sketch005)
   |> angledLine([0, 9.1], %, $rectangleSegmentA005)
   |> angledLine([
        segAng(rectangleSegmentA005) - 90,
        84.07
-         ], %, $rectangleSegmentB004)
+     ], %)
   |> angledLine([
        segAng(rectangleSegmentA005),
        -segLen(rectangleSegmentA005)
-         ], %, $rectangleSegmentC004)
+     ], %)
   |> lineTo([profileStartX(%), profileStartY(%)], %)
   |> close(%)
-    sketch004 = startSketchOn(extrude001, seg05)
-      |> startProfileAt([82.57, 322.96], %)
+sketch004 = startSketchOn(extrude001, seg05)
+profile003 = startProfileAt([82.57, 322.96], sketch004)
   |> angledLine([0, 11.16], %, $rectangleSegmentA004)
   |> angledLine([
        segAng(rectangleSegmentA004) - 90,
        103.07
-         ], %, $rectangleSegmentB003)
+     ], %)
   |> angledLine([
        segAng(rectangleSegmentA004),
        -segLen(rectangleSegmentA004)
-         ], %, $rectangleSegmentC003)
+     ], %)
   |> lineTo([profileStartX(%), profileStartY(%)], %)
   |> close(%)
-    sketch003 = startSketchOn(extrude001, seg04)
-      |> startProfileAt([-209.64, 255.28], %)
+sketch003 = startSketchOn(extrude001, seg04)
+profile002 = startProfileAt([-209.64, 255.28], sketch003)
   |> angledLine([0, 11.56], %, $rectangleSegmentA003)
   |> angledLine([
        segAng(rectangleSegmentA003) - 90,
        106.84
-         ], %, $rectangleSegmentB002)
+     ], %)
   |> angledLine([
        segAng(rectangleSegmentA003),
        -segLen(rectangleSegmentA003)
-         ], %, $rectangleSegmentC002)
+     ], %)
   |> lineTo([profileStartX(%), profileStartY(%)], %)
   |> close(%)
-    sketch002 = startSketchOn(extrude001, seg03)
-      |> startProfileAt([205.96, 254.59], %)
+sketch002 = startSketchOn(extrude001, seg03)
+profile001 = startProfileAt([205.96, 254.59], sketch002)
   |> angledLine([0, 11.39], %, $rectangleSegmentA002)
   |> angledLine([
        segAng(rectangleSegmentA002) - 90,
        105.26
-         ], %, $rectangleSegmentB001)
+     ], %)
   |> angledLine([
        segAng(rectangleSegmentA002),
        -segLen(rectangleSegmentA002)
-         ], %, $rectangleSegmentC001)
+     ], %)
   |> lineTo([profileStartX(%), profileStartY(%)], %)
   |> close(%)
-    `,
+`,
           { shouldNormalise: true }
         )
       })
@@ -392,18 +373,13 @@ test.describe('verify sketch on chamfer works', () => {
         beforeChamferSnippetEnd: '}, extrude001)',
         afterChamferSelectSnippet:
           'sketch002 = startSketchOn(extrude001, seg03)',
-        afterRectangle1stClickSnippet: 'startProfileAt([205.96, 254.59], %)',
-        afterRectangle2ndClickSnippet: `angledLine([0, 11.39], %, $rectangleSegmentA002)
-    |> angledLine([
-         segAng(rectangleSegmentA002) - 90,
-         105.26
-       ], %, $rectangleSegmentB001)
-    |> angledLine([
-         segAng(rectangleSegmentA002),
-         -segLen(rectangleSegmentA002)
-       ], %, $rectangleSegmentC001)
-    |> lineTo([profileStartX(%), profileStartY(%)], %)
-    |> close(%)`,
+        afterRectangle1stClickSnippet:
+          'startProfileAt([205.96, 254.59], sketch002)',
+        afterRectangle2ndClickSnippet: `angledLine([0,11.39],%,$rectangleSegmentA002)
+        |>angledLine([segAng(rectangleSegmentA002)-90,105.26],%)
+        |>angledLine([segAng(rectangleSegmentA002),-segLen(rectangleSegmentA002)],%)
+        |>lineTo([profileStartX(%),profileStartY(%)],%)
+        |>close(%)`,
       })
       await editor.expectEditor.toContain(
         `sketch001 = startSketchOn('XZ')
@@ -433,16 +409,16 @@ chamf = chamfer({
        ]
      }, %)
 sketch002 = startSketchOn(extrude001, seg03)
-  |> startProfileAt([205.96, 254.59], %)
+profile001 = startProfileAt([205.96, 254.59], sketch002)
   |> angledLine([0, 11.39], %, $rectangleSegmentA002)
   |> angledLine([
        segAng(rectangleSegmentA002) - 90,
        105.26
-     ], %, $rectangleSegmentB001)
+     ], %)
   |> angledLine([
        segAng(rectangleSegmentA002),
        -segLen(rectangleSegmentA002)
-     ], %, $rectangleSegmentC001)
+     ], %)
   |> lineTo([profileStartX(%), profileStartY(%)], %)
   |> close(%)
 `,
@@ -504,10 +480,10 @@ test(`Verify axis, origin, and horizontal snapping`, async ({
 
   const expectedCodeSnippets = {
     sketchOnXzPlane: `sketch001 = startSketchOn('XZ')`,
-    pointAtOrigin: `startProfileAt([${originSloppy.kcl[0]}, ${originSloppy.kcl[1]}], %)`,
+    pointAtOrigin: `startProfileAt([${originSloppy.kcl[0]}, ${originSloppy.kcl[1]}], sketch001)`,
     segmentOnXAxis: `xLine(${xAxisSloppy.kcl[0]}, %)`,
-    afterSegmentDraggedOffYAxis: `startProfileAt([${offYAxis.kcl[0]}, ${offYAxis.kcl[1]}], %)`,
-    afterSegmentDraggedOnYAxis: `startProfileAt([${yAxisSloppy.kcl[0]}, ${yAxisSloppy.kcl[1]}], %)`,
+    afterSegmentDraggedOffYAxis: `startProfileAt([${offYAxis.kcl[0]}, ${offYAxis.kcl[1]}], sketch001)`,
+    afterSegmentDraggedOnYAxis: `startProfileAt([${yAxisSloppy.kcl[0]}, ${yAxisSloppy.kcl[1]}], sketch001)`,
   }
 
   await app.initialise()

e2e/playwright/snapshot-tests.spec.ts

@@ -446,8 +446,7 @@ test(
 
     const startXPx = 600
     await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-    code += `
-  |> startProfileAt([7.19, -9.7], %)`
+    code += `profile001 = startProfileAt([7.19, -9.7], sketch001)`
     await expect(page.locator('.cm-content')).toHaveText(code)
     await page.waitForTimeout(100)
 
@@ -469,6 +468,10 @@ test(
       .getByRole('button', { name: 'arc Tangential Arc', exact: true })
       .click()
 
+    // click to continue profile
+    await page.mouse.move(813, 392, { steps: 10 })
+    await page.waitForTimeout(100)
+
     await page.mouse.move(startXPx + PUR * 30, 500 - PUR * 20, { steps: 10 })
 
     await page.waitForTimeout(1000)
@@ -591,8 +594,7 @@ test(
       mask: [page.getByTestId('model-state-indicator')],
     })
     await expect(page.locator('.cm-content')).toHaveText(
-      `sketch001 = startSketchOn('XZ')
-  |> circle({ center = [14.44, -2.44], radius = 1 }, %)`
+      `sketch001 = startSketchOn('XZ')profile001 = circle({ center = [14.44, -2.44], radius = 1 }, sketch001)`
     )
   }
 )
@@ -636,8 +638,7 @@ test.describe(
 
       const startXPx = 600
       await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-      code += `
-  |> startProfileAt([7.19, -9.7], %)`
+      code += `profile001 = startProfileAt([7.19, -9.7], sketch001)`
       await expect(u.codeLocator).toHaveText(code)
       await page.waitForTimeout(100)
 
@@ -655,6 +656,10 @@ test.describe(
         .click()
       await page.waitForTimeout(100)
 
+      // click to continue profile
+      await page.mouse.click(813, 392)
+      await page.waitForTimeout(100)
+
       await page.mouse.click(startXPx + PUR * 30, 500 - PUR * 20)
 
       code += `
@@ -741,8 +746,7 @@ test.describe(
 
       const startXPx = 600
       await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-      code += `
-  |> startProfileAt([182.59, -246.32], %)`
+      code += `profile001 = startProfileAt([182.59, -246.32], sketch001)`
       await expect(u.codeLocator).toHaveText(code)
       await page.waitForTimeout(100)
 
@@ -760,6 +764,10 @@ test.describe(
         .click()
       await page.waitForTimeout(100)
 
+      // click to continue profile
+      await page.mouse.click(813, 392)
+      await page.waitForTimeout(100)
+
       await page.mouse.click(startXPx + PUR * 30, 500 - PUR * 20)
 
       code += `
@@ -1164,3 +1172,109 @@ test.fixme('theme persists', async ({ page, context }) => {
     maxDiffPixels: 100,
   })
 })
+
+test.describe('code color goober', { tag: '@snapshot' }, () => {
+  test('code color goober', async ({ page, context }) => {
+    const u = await getUtils(page)
+    await context.addInitScript(async () => {
+      localStorage.setItem(
+        'persistCode',
+        `// Create a pipe using a sweep.
+
+// Create a path for the sweep.
+sweepPath = startSketchOn('XZ')
+  |> startProfileAt([0.05, 0.05], %)
+  |> line([0, 7], %)
+  |> tangentialArc({ offset = 90, radius = 5 }, %)
+  |> line([-3, 0], %)
+  |> tangentialArc({ offset = -90, radius = 5 }, %)
+  |> line([0, 7], %)
+
+sweepSketch = startSketchOn('XY')
+  |> startProfileAt([2, 0], %)
+  |> arc({
+       angleEnd = 360,
+       angleStart = 0,
+       radius = 2
+     }, %)
+  |> sweep({
+    path = sweepPath,
+  }, %)
+  |> appearance({
+       color = "#bb00ff",
+       metalness = 90,
+       roughness = 90
+     }, %)
+`
+      )
+    })
+
+    await page.setViewportSize({ width: 1200, height: 1000 })
+
+    await u.waitForAuthSkipAppStart()
+
+    await u.openDebugPanel()
+    await u.expectCmdLog('[data-message-type="execution-done"]')
+    await u.clearAndCloseDebugPanel()
+
+    await expect(page, 'expect small color widget').toHaveScreenshot({
+      maxDiffPixels: 100,
+    })
+  })
+
+  test('code color goober opening window', async ({ page, context }) => {
+    const u = await getUtils(page)
+    await context.addInitScript(async () => {
+      localStorage.setItem(
+        'persistCode',
+        `// Create a pipe using a sweep.
+
+// Create a path for the sweep.
+sweepPath = startSketchOn('XZ')
+  |> startProfileAt([0.05, 0.05], %)
+  |> line([0, 7], %)
+  |> tangentialArc({ offset = 90, radius = 5 }, %)
+  |> line([-3, 0], %)
+  |> tangentialArc({ offset = -90, radius = 5 }, %)
+  |> line([0, 7], %)
+
+sweepSketch = startSketchOn('XY')
+  |> startProfileAt([2, 0], %)
+  |> arc({
+       angleEnd = 360,
+       angleStart = 0,
+       radius = 2
+     }, %)
+  |> sweep({
+    path = sweepPath,
+  }, %)
+  |> appearance({
+       color = "#bb00ff",
+       metalness = 90,
+       roughness = 90
+     }, %)
+`
+      )
+    })
+
+    await page.setViewportSize({ width: 1200, height: 1000 })
+
+    await u.waitForAuthSkipAppStart()
+
+    await u.openDebugPanel()
+    await u.expectCmdLog('[data-message-type="execution-done"]')
+    await u.clearAndCloseDebugPanel()
+
+    await expect(page.locator('.cm-css-color-picker-wrapper')).toBeVisible()
+
+    // Click the color widget
+    await page.locator('.cm-css-color-picker-wrapper input').click()
+
+    await expect(
+      page,
+      'expect small color widget to have window open'
+    ).toHaveScreenshot({
+      maxDiffPixels: 100,
+    })
+  })
+})

e2e/playwright/storageStates.ts

@@ -14,7 +14,7 @@ export const TEST_SETTINGS = {
   },
   modeling: {
     defaultUnit: 'in',
-    mouseControls: 'KittyCAD',
+    mouseControls: 'Zoo',
     cameraProjection: 'perspective',
     showDebugPanel: true,
   },

e2e/playwright/test-network-and-connection-issues.spec.ts

@@ -1,6 +1,8 @@
 import { test, expect } from '@playwright/test'
 
 import { commonPoints, getUtils, setup, tearDown } from './test-utils'
+import { uuidv4 } from 'lib/utils'
+import { EngineCommand } from 'lang/std/artifactGraph'
 
 test.beforeEach(async ({ context, page }, testInfo) => {
   await setup(context, page, testInfo)
@@ -130,17 +132,16 @@ test.describe('Test network and connection issues', () => {
 
     const startXPx = 600
     await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-    await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn('XZ')
-    |> startProfileAt(${commonPoints.startAt}, %)`)
+    await expect(page.locator('.cm-content')).toHaveText(
+      `sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${commonPoints.startAt}, sketch001)`
+    )
     await page.waitForTimeout(100)
 
     await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
     await page.waitForTimeout(100)
 
     await expect(page.locator('.cm-content'))
-      .toHaveText(`sketch001 = startSketchOn('XZ')
-    |> startProfileAt(${commonPoints.startAt}, %)
+      .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${commonPoints.startAt}, sketch001)
     |> xLine(${commonPoints.num1}, %)`)
 
     // Expect the network to be up
@@ -188,7 +189,9 @@ test.describe('Test network and connection issues', () => {
     await page.mouse.click(100, 100)
 
     // select a line
-    await page.getByText(`startProfileAt(${commonPoints.startAt}, %)`).click()
+    await page
+      .getByText(`startProfileAt(${commonPoints.startAt}, sketch001)`)
+      .click()
 
     // enter sketch again
     await u.doAndWaitForCmd(
@@ -202,11 +205,36 @@ test.describe('Test network and connection issues', () => {
 
     await page.waitForTimeout(150)
 
+    const camCommand: EngineCommand = {
+      type: 'modeling_cmd_req',
+      cmd_id: uuidv4(),
+      cmd: {
+        type: 'default_camera_look_at',
+        center: { x: 109, y: 0, z: -152 },
+        vantage: { x: 115, y: -505, z: -152 },
+        up: { x: 0, y: 0, z: 1 },
+      },
+    }
+    const updateCamCommand: EngineCommand = {
+      type: 'modeling_cmd_req',
+      cmd_id: uuidv4(),
+      cmd: {
+        type: 'default_camera_get_settings',
+      },
+    }
+    await u.sendCustomCmd(camCommand)
+    await page.waitForTimeout(100)
+    await u.sendCustomCmd(updateCamCommand)
+    await page.waitForTimeout(100)
+
+    // click to continue profile
+    await page.mouse.click(1007, 400)
+    await page.waitForTimeout(100)
     // Ensure we can continue sketching
     await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 20)
     await expect.poll(u.normalisedEditorCode)
       .toBe(`sketch001 = startSketchOn('XZ')
-  |> startProfileAt([12.34, -12.34], %)
+profile001 = startProfileAt([12.34, -12.34], sketch001)
   |> xLine(12.34, %)
   |> line([-12.34, 12.34], %)
 
@@ -216,7 +244,7 @@ test.describe('Test network and connection issues', () => {
 
     await expect.poll(u.normalisedEditorCode)
       .toBe(`sketch001 = startSketchOn('XZ')
-  |> startProfileAt([12.34, -12.34], %)
+profile001 = startProfileAt([12.34, -12.34], sketch001)
   |> xLine(12.34, %)
   |> line([-12.34, 12.34], %)
   |> xLine(-12.34, %)

e2e/playwright/testing-camera-movement.spec.ts

@@ -479,4 +479,26 @@ test.describe('Testing Camera Movement', () => {
       })
     }
   })
+
+  test('Right-click opens context menu when not dragged', async ({ page }) => {
+    const u = await getUtils(page)
+    await u.waitForAuthSkipAppStart()
+
+    await test.step(`The menu should not show if we drag the mouse`, async () => {
+      await page.mouse.move(900, 200)
+      await page.mouse.down({ button: 'right' })
+      await page.mouse.move(900, 300)
+      await page.mouse.up({ button: 'right' })
+
+      await expect(page.getByTestId('view-controls-menu')).not.toBeVisible()
+    })
+
+    await test.step(`The menu should show if we don't drag the mouse`, async () => {
+      await page.mouse.move(900, 200)
+      await page.mouse.down({ button: 'right' })
+      await page.mouse.up({ button: 'right' })
+
+      await expect(page.getByTestId('view-controls-menu')).toBeVisible()
+    })
+  })
 })

e2e/playwright/testing-constraints.spec.ts

@@ -21,7 +21,7 @@ test.describe('Testing constraints', () => {
   |> line([20, 0], %)
   |> line([0, 20], %)
   |> xLine(-20, %)
-  `
+`
       )
     })
 

e2e/playwright/testing-selections.spec.ts

@@ -77,30 +77,31 @@ test.describe('Testing selections', () => {
       const startXPx = 600
       await u.closeDebugPanel()
       await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-      await expect(page.locator('.cm-content'))
-        .toHaveText(`sketch001 = startSketchOn('XZ')
-    |> startProfileAt(${commonPoints.startAt}, %)`)
+      await expect(page.locator('.cm-content')).toHaveText(
+        `sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${commonPoints.startAt}, sketch001)`
+      )
 
       await page.waitForTimeout(100)
       await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
 
       await expect(page.locator('.cm-content'))
-        .toHaveText(`sketch001 = startSketchOn('XZ')
-    |> startProfileAt(${commonPoints.startAt}, %)
+        .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${commonPoints.startAt}, sketch001)
     |> xLine(${commonPoints.num1}, %)`)
 
       await page.waitForTimeout(100)
       await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 20)
       await expect(page.locator('.cm-content'))
-        .toHaveText(`sketch001 = startSketchOn('XZ')
-    |> startProfileAt(${commonPoints.startAt}, %)
+        .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${
+        commonPoints.startAt
+      }, sketch001)
     |> xLine(${commonPoints.num1}, %)
     |> yLine(${commonPoints.num1 + 0.01}, %)`)
       await page.waitForTimeout(100)
       await page.mouse.click(startXPx, 500 - PUR * 20)
       await expect(page.locator('.cm-content'))
-        .toHaveText(`sketch001 = startSketchOn('XZ')
-    |> startProfileAt(${commonPoints.startAt}, %)
+        .toHaveText(`sketch001 = startSketchOn('XZ')profile001 = startProfileAt(${
+        commonPoints.startAt
+      }, sketch001)
     |> xLine(${commonPoints.num1}, %)
     |> yLine(${commonPoints.num1 + 0.01}, %)
     |> xLine(${commonPoints.num2 * -1}, %)`)
@@ -330,6 +331,28 @@ part009 = startSketchOn('XY')
   |> angledLineToX({ angle = 60, to = pipeLargeDia }, %)
   |> close(%)
 rev = revolve({ axis = 'y' }, part009)
+sketch006 = startSketchOn('XY')
+profile001 = circle({
+  center = [42.91, -70.42],
+  radius = 17.96
+}, sketch006)
+profile002 = startProfileAt([86.92, -63.81], sketch006)
+  |> angledLine([0, 63.81], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       17.05
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)
+  |> close(%)
+profile003 = startProfileAt([40.16, -120.48], sketch006)
+  |> line([26.95, 24.21], %)
+  |> line([20.91, -28.61], %)
+  |> line([32.46, 18.71], %)
+
 `
       )
     }, KCL_DEFAULT_LENGTH)
@@ -362,9 +385,10 @@ rev = revolve({ axis = 'y' }, part009)
     })
     await page.waitForTimeout(100)
 
-    const revolve = { x: 646, y: 248 }
+    const revolve = { x: 635, y: 253 }
     const parentExtrude = { x: 915, y: 133 }
     const solid2d = { x: 770, y: 167 }
+    const individualProfile = { x: 694, y: 432 }
 
     // DELETE REVOLVE
     await page.mouse.click(revolve.x, revolve.y)
@@ -430,6 +454,20 @@ rev = revolve({ axis = 'y' }, part009)
     await u.expectCmdLog('[data-message-type="execution-done"]', 10_000)
     await page.waitForTimeout(200)
     await expect(u.codeLocator).not.toContainText(`sketch005 = startSketchOn({`)
+
+    // Delete a single profile
+    await page.mouse.click(individualProfile.x, individualProfile.y)
+    await page.waitForTimeout(100)
+    const codeToBeDeletedSnippet =
+      'profile003 = startProfileAt([40.16, -120.48], sketch006)'
+    await expect(page.locator('.cm-activeLine')).toHaveText(
+      '  |> line([20.91, -28.61], %)'
+    )
+    await u.clearCommandLogs()
+    await page.keyboard.press('Backspace')
+    await u.expectCmdLog('[data-message-type="execution-done"]', 10_000)
+    await page.waitForTimeout(200)
+    await expect(u.codeLocator).not.toContainText(codeToBeDeletedSnippet)
   })
   test("Deleting solid that the AST mod can't handle results in a toast message", async ({
     page,
@@ -1258,12 +1296,15 @@ extrude001 = extrude(50, sketch001)
 
     await page.waitForTimeout(600)
 
+    const firstClickCoords = { x: 650, y: 200 } as const
     // Place a point because the line tool will exit if no points are pressed
-    await page.mouse.click(650, 200)
+    await page.mouse.click(firstClickCoords.x, firstClickCoords.y)
     await page.waitForTimeout(600)
 
     // Code before exiting the tool
-    let previousCodeContent = await page.locator('.cm-content').innerText()
+    let previousCodeContent = (
+      await page.locator('.cm-content').innerText()
+    ).replace(/\s+/g, '')
 
     // deselect the line tool by clicking it
     await page.getByRole('button', { name: 'line Line', exact: true }).click()
@@ -1275,14 +1316,23 @@ extrude001 = extrude(50, sketch001)
     await page.mouse.click(750, 200)
     await page.waitForTimeout(100)
 
-    // expect no change
-    await expect(page.locator('.cm-content')).toHaveText(previousCodeContent)
+    await expect
+      .poll(async () => {
+        let str = await page.locator('.cm-content').innerText()
+        str = str.replace(/\s+/g, '')
+        return str
+      })
+      .toBe(previousCodeContent)
 
     // select line tool again
     await page.getByRole('button', { name: 'line Line', exact: true }).click()
 
     await u.closeDebugPanel()
 
+    // Click to continue profile
+    await page.mouse.click(firstClickCoords.x, firstClickCoords.y)
+    await page.waitForTimeout(100)
+
     // line tool should work as expected again
     await page.mouse.click(700, 200)
     await expect(page.locator('.cm-content')).not.toHaveText(

e2e/playwright/various.spec.ts

@@ -224,8 +224,13 @@ test('First escape in tool pops you out of tool, second exits sketch mode', asyn
   // Draw a line
   await page.mouse.move(700, 200, { steps: 5 })
   await page.mouse.click(700, 200)
-  await page.mouse.move(800, 250, { steps: 5 })
-  await page.mouse.click(800, 250)
+
+  const secondMousePosition = { x: 800, y: 250 }
+
+  await page.mouse.move(secondMousePosition.x, secondMousePosition.y, {
+    steps: 5,
+  })
+  await page.mouse.click(secondMousePosition.x, secondMousePosition.y)
   // Unequip line tool
   await page.keyboard.press('Escape')
   // Make sure we didn't pop out of sketch mode.
@@ -234,9 +239,17 @@ test('First escape in tool pops you out of tool, second exits sketch mode', asyn
   // Equip arc tool
   await page.keyboard.press('a')
   await expect(arcButton).toHaveAttribute('aria-pressed', 'true')
+
+  // click in the same position again to continue the profile
+  await page.mouse.move(secondMousePosition.x, secondMousePosition.y, {
+    steps: 5,
+  })
+  await page.mouse.click(secondMousePosition.x, secondMousePosition.y)
+
   await page.mouse.move(1000, 100, { steps: 5 })
   await page.mouse.click(1000, 100)
   await page.keyboard.press('Escape')
+  await expect(arcButton).toHaveAttribute('aria-pressed', 'false')
   await page.keyboard.press('l')
   await expect(lineButton).toHaveAttribute('aria-pressed', 'true')
 
@@ -537,9 +550,9 @@ test('Sketch on face', async ({ page }) => {
 
   await expect.poll(u.normalisedEditorCode).toContain(
     u.normalisedCode(`sketch002 = startSketchOn(extrude001, seg01)
-  |> startProfileAt([-12.94, 6.6], %)
-  |> line([2.45, -0.2], %)
-  |> line([-2.6, -1.25], %)
+profile001 = startProfileAt([-12.88, 6.66], sketch002)
+  |> line([2.71, -0.22], %)
+  |> line([-2.87, -1.38], %)
   |> lineTo([profileStartX(%), profileStartY(%)], %)
   |> close(%)`)
   )
@@ -554,8 +567,7 @@ test('Sketch on face', async ({ page }) => {
   await page.getByText('startProfileAt([-12').click()
   await expect(page.getByRole('button', { name: 'Edit Sketch' })).toBeVisible()
   await page.getByRole('button', { name: 'Edit Sketch' }).click()
-  await page.waitForTimeout(400)
-  await page.waitForTimeout(150)
+  await page.waitForTimeout(500)
   await page.setViewportSize({ width: 1200, height: 1200 })
   await u.openAndClearDebugPanel()
   await u.updateCamPosition([452, -152, 1166])

public/kcl-samples-manifest-fallback.json

@@ -119,6 +119,11 @@
     "title": "Pipe and Flange Assembly",
     "description": "A crucial component in various piping systems, designed to facilitate the connection, disconnection, and access to piping for inspection, cleaning, and modifications. This assembly combines pipes (long cylindrical conduits) with flanges (plate-like fittings) to create a secure yet detachable joint."
   },
+  {
+    "file": "pipe-with-bend.kcl",
+    "title": "Pipe with bend",
+    "description": "A tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances that can flow."
+  },
   {
     "file": "poopy-shoe.kcl",
     "title": "Poopy Shoe",

src/Toolbar.tsx

@@ -6,7 +6,6 @@ import { useCommandsContext } from 'hooks/useCommandsContext'
 import { useNetworkContext } from 'hooks/useNetworkContext'
 import { NetworkHealthState } from 'hooks/useNetworkStatus'
 import { ActionButton } from 'components/ActionButton'
-import { isSingleCursorInPipe } from 'lang/queryAst'
 import { useKclContext } from 'lang/KclProvider'
 import { ActionButtonDropdown } from 'components/ActionButtonDropdown'
 import { useHotkeys } from 'react-hotkeys-hook'
@@ -22,6 +21,7 @@ import {
 } from 'lib/toolbar'
 import { isDesktop } from 'lib/isDesktop'
 import { openExternalBrowserIfDesktop } from 'lib/openWindow'
+import { isCursorInFunctionDefinition } from 'lang/queryAst'
 
 export function Toolbar({
   className = '',
@@ -38,7 +38,12 @@ export function Toolbar({
     '!border-transparent hover:!border-chalkboard-20 dark:enabled:hover:!border-primary pressed:!border-primary ui-open:!border-primary'
 
   const sketchPathId = useMemo(() => {
-    if (!isSingleCursorInPipe(context.selectionRanges, kclManager.ast))
+    if (
+      isCursorInFunctionDefinition(
+        kclManager.ast,
+        context.selectionRanges.graphSelections[0]
+      )
+    )
       return false
     return isCursorInSketchCommandRange(
       engineCommandManager.artifactGraph,

src/clientSideScene/CameraControls.ts

@@ -105,7 +105,7 @@ export class CameraControls {
   pendingZoom: number | null = null
   pendingRotation: Vector2 | null = null
   pendingPan: Vector2 | null = null
-  interactionGuards: MouseGuard = cameraMouseDragGuards.KittyCAD
+  interactionGuards: MouseGuard = cameraMouseDragGuards.Zoo
   isFovAnimationInProgress = false
   perspectiveFovBeforeOrtho = 45
   get isPerspective() {

src/clientSideScene/ClientSideSceneComp.tsx

@@ -433,6 +433,8 @@ export async function deleteSegment({
   if (!sketchDetails) return
   await sceneEntitiesManager.updateAstAndRejigSketch(
     pathToNode,
+    sketchDetails.sketchNodePaths,
+    sketchDetails.planeNodePath,
     modifiedAst,
     sketchDetails.zAxis,
     sketchDetails.yAxis,

src/clientSideScene/segments.ts

@@ -691,19 +691,21 @@ export function createProfileStartHandle({
   scale = 1,
   theme,
   isSelected,
+  size = 12,
   ...rest
 }: {
   from: Coords2d
   scale?: number
   theme: Themes
   isSelected?: boolean
+  size?: number
 } & (
   | { isDraft: true }
   | { isDraft: false; id: string; pathToNode: PathToNode }
 )) {
   const group = new Group()
 
-  const geometry = new BoxGeometry(12, 12, 12) // in pixels scaled later
+  const geometry = new BoxGeometry(size, size, size) // in pixels scaled later
   const baseColor = getThemeColorForThreeJs(theme)
   const color = isSelected ? 0x0000ff : baseColor
   const body = new MeshBasicMaterial({ color })

src/components/ContextMenu.tsx

@@ -1,13 +1,23 @@
 import toast from 'react-hot-toast'
 import { ActionIcon, ActionIconProps } from './ActionIcon'
-import { RefObject, useEffect, useMemo, useRef, useState } from 'react'
+import {
+  MouseEvent,
+  RefObject,
+  useCallback,
+  useEffect,
+  useMemo,
+  useRef,
+  useState,
+} from 'react'
 import { useHotkeys } from 'react-hotkeys-hook'
 import { Dialog } from '@headlessui/react'
 
-interface ContextMenuProps
+export interface ContextMenuProps
   extends Omit<React.HTMLAttributes<HTMLUListElement>, 'children'> {
   items?: React.ReactElement[]
   menuTargetElement?: RefObject<HTMLElement>
+  guard?: (e: globalThis.MouseEvent) => boolean
+  event?: 'contextmenu' | 'mouseup'
 }
 
 const DefaultContextMenuItems = [
@@ -20,6 +30,8 @@ export function ContextMenu({
   items = DefaultContextMenuItems,
   menuTargetElement,
   className,
+  guard,
+  event = 'contextmenu',
   ...props
 }: ContextMenuProps) {
   const dialogRef = useRef<HTMLDivElement>(null)
@@ -32,6 +44,15 @@ export function ContextMenu({
   useHotkeys('esc', () => setOpen(false), {
     enabled: open,
   })
+  const handleContextMenu = useCallback(
+    (e: globalThis.MouseEvent) => {
+      if (guard && !guard(e)) return
+      e.preventDefault()
+      setPosition({ x: e.clientX, y: e.clientY })
+      setOpen(true)
+    },
+    [guard, setPosition, setOpen]
+  )
 
   const dialogPositionStyle = useMemo(() => {
     if (!dialogRef.current)
@@ -78,21 +99,9 @@ export function ContextMenu({
 
   // Add context menu listener to target once mounted
   useEffect(() => {
-    const handleContextMenu = (e: MouseEvent) => {
-      console.log('context menu', e)
-      e.preventDefault()
-      setPosition({ x: e.x, y: e.y })
-      setOpen(true)
-    }
-    menuTargetElement?.current?.addEventListener(
-      'contextmenu',
-      handleContextMenu
-    )
+    menuTargetElement?.current?.addEventListener(event, handleContextMenu)
     return () => {
-      menuTargetElement?.current?.removeEventListener(
-        'contextmenu',
-        handleContextMenu
-      )
+      menuTargetElement?.current?.removeEventListener(event, handleContextMenu)
     }
   }, [menuTargetElement?.current])
 
@@ -100,7 +109,10 @@ export function ContextMenu({
     <Dialog open={open} onClose={() => setOpen(false)}>
       <div
         className="fixed inset-0 z-50 w-screen h-screen"
-        onContextMenu={(e) => e.preventDefault()}
+        onContextMenu={(e) => {
+          e.preventDefault()
+          setPosition({ x: e.clientX, y: e.clientY })
+        }}
       >
         <Dialog.Backdrop className="fixed z-10 inset-0" />
         <Dialog.Panel

src/components/Gizmo.tsx

@@ -1,6 +1,6 @@
 import { SceneInfra } from 'clientSideScene/sceneInfra'
 import { sceneInfra } from 'lib/singletons'
-import { MutableRefObject, useEffect, useMemo, useRef } from 'react'
+import { MutableRefObject, useEffect, useRef } from 'react'
 import {
   WebGLRenderer,
   Scene,
@@ -19,16 +19,14 @@ import {
   Intersection,
   Object3D,
 } from 'three'
-import {
-  ContextMenu,
-  ContextMenuDivider,
-  ContextMenuItem,
-  ContextMenuItemRefresh,
-} from './ContextMenu'
 import { Popover } from '@headlessui/react'
 import { CustomIcon } from './CustomIcon'
 import { reportRejection } from 'lib/trap'
-import { useModelingContext } from 'hooks/useModelingContext'
+import {
+  useViewControlMenuItems,
+  ViewControlContextMenu,
+} from './ViewControlMenu'
+import { AxisNames } from 'lib/constants'
 
 const CANVAS_SIZE = 80
 const FRUSTUM_SIZE = 0.5
@@ -40,64 +38,14 @@ enum AxisColors {
   Z = '#6689ef',
   Gray = '#c6c7c2',
 }
-enum AxisNames {
-  X = 'x',
-  Y = 'y',
-  Z = 'z',
-  NEG_X = '-x',
-  NEG_Y = '-y',
-  NEG_Z = '-z',
-}
-const axisNamesSemantic: Record<AxisNames, string> = {
-  [AxisNames.X]: 'Right',
-  [AxisNames.Y]: 'Back',
-  [AxisNames.Z]: 'Top',
-  [AxisNames.NEG_X]: 'Left',
-  [AxisNames.NEG_Y]: 'Front',
-  [AxisNames.NEG_Z]: 'Bottom',
-}
 
 export default function Gizmo() {
+  const menuItems = useViewControlMenuItems()
   const wrapperRef = useRef<HTMLDivElement | null>(null)
   const canvasRef = useRef<HTMLCanvasElement | null>(null)
   const raycasterIntersect = useRef<Intersection<Object3D> | null>(null)
   const cameraPassiveUpdateTimer = useRef(0)
   const raycasterPassiveUpdateTimer = useRef(0)
-  const { send: modelingSend } = useModelingContext()
-  const menuItems = useMemo(
-    () => [
-      ...Object.entries(axisNamesSemantic).map(([axisName, axisSemantic]) => (
-        <ContextMenuItem
-          key={axisName}
-          onClick={() => {
-            sceneInfra.camControls
-              .updateCameraToAxis(axisName as AxisNames)
-              .catch(reportRejection)
-          }}
-        >
-          {axisSemantic} view
-        </ContextMenuItem>
-      )),
-      <ContextMenuDivider />,
-      <ContextMenuItem
-        onClick={() => {
-          sceneInfra.camControls.resetCameraPosition().catch(reportRejection)
-        }}
-      >
-        Reset view
-      </ContextMenuItem>,
-      <ContextMenuItem
-        onClick={() => {
-          modelingSend({ type: 'Center camera on selection' })
-        }}
-      >
-        Center view on selection
-      </ContextMenuItem>,
-      <ContextMenuDivider />,
-      <ContextMenuItemRefresh />,
-    ],
-    [axisNamesSemantic]
-  )
 
   useEffect(() => {
     if (!canvasRef.current) return
@@ -161,7 +109,7 @@ export default function Gizmo() {
         className="grid place-content-center rounded-full overflow-hidden border border-solid border-primary/50 pointer-events-auto bg-chalkboard-10/70 dark:bg-chalkboard-100/80 backdrop-blur-sm"
       >
         <canvas ref={canvasRef} />
-        <ContextMenu menuTargetElement={wrapperRef} items={menuItems} />
+        <ViewControlContextMenu menuTargetElement={wrapperRef} />
       </div>
       <GizmoDropdown items={menuItems} />
     </div>

src/components/ModelingMachineProvider.tsx

@@ -24,7 +24,7 @@ import { useSetupEngineManager } from 'hooks/useSetupEngineManager'
 import { useSettingsAuthContext } from 'hooks/useSettingsAuthContext'
 import {
   isCursorInSketchCommandRange,
-  updatePathToNodeFromMap,
+  updateSketchDetailsNodePaths,
 } from 'lang/util'
 import {
   kclManager,
@@ -71,14 +71,24 @@ import {
   replaceValueAtNodePath,
   sketchOnExtrudedFace,
   sketchOnOffsetPlane,
+  splitPipedProfile,
   startSketchOnDefault,
 } from 'lang/modifyAst'
-import { PathToNode, Program, parse, recast, resultIsOk } from 'lang/wasm'
+import {
+  PathToNode,
+  Program,
+  VariableDeclaration,
+  parse,
+  recast,
+  resultIsOk,
+} from 'lang/wasm'
 import {
   doesSceneHaveExtrudedSketch,
   doesSceneHaveSweepableSketch,
-  getNodePathFromSourceRange,
-  isSingleCursorInPipe,
+  doesSketchPipeNeedSplitting,
+  getNodeFromPath,
+  isCursorInFunctionDefinition,
+  traverse,
 } from 'lang/queryAst'
 import { exportFromEngine } from 'lib/exportFromEngine'
 import { Models } from '@kittycad/lib/dist/types/src'
@@ -86,7 +96,7 @@ import toast from 'react-hot-toast'
 import { EditorSelection, Transaction } from '@codemirror/state'
 import { useLoaderData, useNavigate, useSearchParams } from 'react-router-dom'
 import { letEngineAnimateAndSyncCamAfter } from 'clientSideScene/CameraControls'
-import { err, reportRejection, trap } from 'lib/trap'
+import { err, reportRejection, trap, reject } from 'lib/trap'
 import { useCommandsContext } from 'hooks/useCommandsContext'
 import { modelingMachineEvent } from 'editor/manager'
 import { hasValidEdgeTreatmentSelection } from 'lang/modifyAst/addEdgeTreatment'
@@ -100,6 +110,10 @@ import { useFileContext } from 'hooks/useFileContext'
 import { uuidv4 } from 'lib/utils'
 import { IndexLoaderData } from 'lib/types'
 import { Node } from 'wasm-lib/kcl/bindings/Node'
+import {
+  getPathsFromArtifact,
+  getPlaneFromArtifact,
+} from 'lang/std/artifactGraph'
 
 type MachineContext<T extends AnyStateMachine> = {
   state: StateFrom<T>
@@ -290,7 +304,7 @@ export const ModelingMachineProvider = ({
           return {
             sketchDetails: {
               ...sketchDetails,
-              sketchPathToNode: event.data,
+              sketchEntryNodePath: event.data,
             },
           }
         }),
@@ -413,9 +427,17 @@ export const ModelingMachineProvider = ({
                 selectionRanges: setSelections.selection,
                 sketchDetails: {
                   ...sketchDetails,
-                  sketchPathToNode:
-                    setSelections.updatedPathToNode ||
-                    sketchDetails?.sketchPathToNode ||
+                  sketchEntryNodePath:
+                    setSelections.updatedSketchEntryNodePath ||
+                    sketchDetails?.sketchEntryNodePath ||
+                    [],
+                  sketchNodePaths:
+                    setSelections.updatedSketchNodePaths ||
+                    sketchDetails?.sketchNodePaths ||
+                    [],
+                  planeNodePath:
+                    setSelections.updatedPlaneNodePath ||
+                    sketchDetails?.planeNodePath ||
                     [],
                 },
               }
@@ -625,7 +647,6 @@ export const ModelingMachineProvider = ({
           }
 
           const canShell = canShellSelection(selectionRanges)
-          console.log('canShellSelection', canShellSelection(selectionRanges))
           if (err(canShell)) return false
           return canShell
         },
@@ -648,7 +669,12 @@ export const ModelingMachineProvider = ({
         'Selection is on face': ({ context: { selectionRanges }, event }) => {
           if (event.type !== 'Enter sketch') return false
           if (event.data?.forceNewSketch) return false
-          if (!isSingleCursorInPipe(selectionRanges, kclManager.ast))
+          if (
+            isCursorInFunctionDefinition(
+              kclManager.ast,
+              selectionRanges.graphSelections[0]
+            )
+          )
             return false
           return !!isCursorInSketchCommandRange(
             engineCommandManager.artifactGraph,
@@ -679,10 +705,32 @@ export const ModelingMachineProvider = ({
               // this assumes no changes have been made to the sketch besides what we did when entering the sketch
               // i.e. doesn't account for user's adding code themselves, maybe we need store a flag userEditedSinceSketchMode?
               const newAst = structuredClone(kclManager.ast)
-              const varDecIndex = sketchDetails.sketchPathToNode[1][0]
+              const varDecIndex = sketchDetails.planeNodePath[1][0]
+
+              const varDec = getNodeFromPath<VariableDeclaration>(
+                newAst,
+                sketchDetails.planeNodePath,
+                'VariableDeclaration'
+              )
+              if (err(varDec)) return reject(new Error('No varDec'))
+              const variableName = varDec.node.declaration.id.name
+              let isIdentifierUsed = false
+              traverse(newAst, {
+                enter: (node) => {
+                  if (
+                    node.type === 'Identifier' &&
+                    node.name === variableName
+                  ) {
+                    isIdentifierUsed = true
+                  }
+                },
+              })
+              if (isIdentifierUsed) return
+
               // remove body item at varDecIndex
               newAst.body = newAst.body.filter((_, i) => i !== varDecIndex)
               await kclManager.executeAstMock(newAst)
+              await codeManager.updateEditorWithAstAndWriteToFile(newAst)
             }
             sceneInfra.setCallbacks({
               onClick: () => {},
@@ -692,7 +740,7 @@ export const ModelingMachineProvider = ({
           }
         ),
         'animate-to-face': fromPromise(async ({ input }) => {
-          if (!input) return undefined
+          if (!input) return null
           if (input.type === 'extrudeFace' || input.type === 'offsetPlane') {
             const sketched =
               input.type === 'extrudeFace'
@@ -719,7 +767,9 @@ export const ModelingMachineProvider = ({
             await letEngineAnimateAndSyncCamAfter(engineCommandManager, id)
             sceneInfra.camControls.syncDirection = 'clientToEngine'
             return {
-              sketchPathToNode: pathToNewSketchNode,
+              sketchEntryNodePath: [],
+              planeNodePath: pathToNewSketchNode,
+              sketchNodePaths: [],
               zAxis: input.zAxis,
               yAxis: input.yAxis,
               origin: input.position,
@@ -739,7 +789,9 @@ export const ModelingMachineProvider = ({
           )
 
           return {
-            sketchPathToNode: pathToNode,
+            sketchEntryNodePath: [],
+            planeNodePath: pathToNode,
+            sketchNodePaths: [],
             zAxis: input.zAxis,
             yAxis: input.yAxis,
             origin: [0, 0, 0],
@@ -747,12 +799,14 @@ export const ModelingMachineProvider = ({
         }),
         'animate-to-sketch': fromPromise(
           async ({ input: { selectionRanges } }) => {
-            const sourceRange =
-              selectionRanges.graphSelections[0]?.codeRef?.range
-            const sketchPathToNode = getNodePathFromSourceRange(
-              kclManager.ast,
-              sourceRange
+            const sketchPathToNode =
+              selectionRanges.graphSelections[0]?.codeRef?.pathToNode
+            const plane = getPlaneFromArtifact(
+              selectionRanges.graphSelections[0].artifact,
+              engineCommandManager.artifactGraph
             )
+            if (err(plane)) return Promise.reject(plane)
+
             const info = await getSketchOrientationDetails(
               sketchPathToNode || []
             )
@@ -760,8 +814,17 @@ export const ModelingMachineProvider = ({
               engineCommandManager,
               info?.sketchDetails?.faceId || ''
             )
-            return {
+            const sketchPaths = getPathsFromArtifact({
+              artifact: selectionRanges.graphSelections[0].artifact,
               sketchPathToNode: sketchPathToNode || [],
+            })
+            if (err(sketchPaths)) return Promise.reject(sketchPaths)
+            if (!plane.codeRef)
+              return Promise.reject(new Error('No plane codeRef'))
+            return {
+              sketchEntryNodePath: sketchPathToNode || [],
+              sketchNodePaths: sketchPaths,
+              planeNodePath: plane.codeRef.pathToNode,
               zAxis: info.sketchDetails.zAxis || null,
               yAxis: info.sketchDetails.yAxis || null,
               origin: info.sketchDetails.origin.map(
@@ -773,7 +836,7 @@ export const ModelingMachineProvider = ({
 
         'Get horizontal info': fromPromise(
           async ({ input: { selectionRanges, sketchDetails } }) => {
-            const { modifiedAst, pathToNodeMap } =
+            const { modifiedAst, pathToNodeMap, exprInsertIndex } =
               await applyConstraintHorzVertDistance({
                 constraint: 'setHorzDistance',
                 selectionRanges,
@@ -785,13 +848,23 @@ export const ModelingMachineProvider = ({
 
             if (!sketchDetails)
               return Promise.reject(new Error('No sketch details'))
-            const updatedPathToNode = updatePathToNodeFromMap(
-              sketchDetails.sketchPathToNode,
-              pathToNodeMap
-            )
+
+            const {
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
+            } = updateSketchDetailsNodePaths({
+              sketchEntryNodePath: sketchDetails.sketchEntryNodePath,
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              planeNodePath: sketchDetails.planeNodePath,
+              exprInsertIndex,
+            })
+
             const updatedAst =
               await sceneEntitiesManager.updateAstAndRejigSketch(
-                updatedPathToNode,
+                updatedSketchEntryNodePath,
+                updatedSketchNodePaths,
+                updatedPlaneNodePath,
                 _modifiedAst,
                 sketchDetails.zAxis,
                 sketchDetails.yAxis,
@@ -812,13 +885,15 @@ export const ModelingMachineProvider = ({
             return {
               selectionType: 'completeSelection',
               selection,
-              updatedPathToNode,
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
             }
           }
         ),
         'Get vertical info': fromPromise(
           async ({ input: { selectionRanges, sketchDetails } }) => {
-            const { modifiedAst, pathToNodeMap } =
+            const { modifiedAst, pathToNodeMap, exprInsertIndex } =
               await applyConstraintHorzVertDistance({
                 constraint: 'setVertDistance',
                 selectionRanges,
@@ -829,13 +904,23 @@ export const ModelingMachineProvider = ({
             const _modifiedAst = pResult.program
             if (!sketchDetails)
               return Promise.reject(new Error('No sketch details'))
-            const updatedPathToNode = updatePathToNodeFromMap(
-              sketchDetails.sketchPathToNode,
-              pathToNodeMap
-            )
+
+            const {
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
+            } = updateSketchDetailsNodePaths({
+              sketchEntryNodePath: sketchDetails.sketchEntryNodePath,
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              planeNodePath: sketchDetails.planeNodePath,
+              exprInsertIndex,
+            })
+
             const updatedAst =
               await sceneEntitiesManager.updateAstAndRejigSketch(
-                updatedPathToNode,
+                updatedSketchEntryNodePath,
+                updatedSketchNodePaths,
+                updatedPlaneNodePath,
                 _modifiedAst,
                 sketchDetails.zAxis,
                 sketchDetails.yAxis,
@@ -856,7 +941,9 @@ export const ModelingMachineProvider = ({
             return {
               selectionType: 'completeSelection',
               selection,
-              updatedPathToNode,
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
             }
           }
         ),
@@ -866,7 +953,8 @@ export const ModelingMachineProvider = ({
               selectionRanges,
             })
             if (err(info)) return Promise.reject(info)
-            const { modifiedAst, pathToNodeMap } = await (info.enabled
+            const { modifiedAst, pathToNodeMap, exprInsertIndex } =
+              await (info.enabled
                 ? applyConstraintAngleBetween({
                     selectionRanges,
                   })
@@ -882,13 +970,23 @@ export const ModelingMachineProvider = ({
 
             if (!sketchDetails)
               return Promise.reject(new Error('No sketch details'))
-            const updatedPathToNode = updatePathToNodeFromMap(
-              sketchDetails.sketchPathToNode,
-              pathToNodeMap
-            )
+
+            const {
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
+            } = updateSketchDetailsNodePaths({
+              sketchEntryNodePath: sketchDetails.sketchEntryNodePath,
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              planeNodePath: sketchDetails.planeNodePath,
+              exprInsertIndex,
+            })
+
             const updatedAst =
               await sceneEntitiesManager.updateAstAndRejigSketch(
-                updatedPathToNode,
+                updatedSketchEntryNodePath,
+                updatedSketchNodePaths,
+                updatedPlaneNodePath,
                 _modifiedAst,
                 sketchDetails.zAxis,
                 sketchDetails.yAxis,
@@ -909,7 +1007,9 @@ export const ModelingMachineProvider = ({
             return {
               selectionType: 'completeSelection',
               selection,
-              updatedPathToNode,
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
             }
           }
         ),
@@ -924,20 +1024,30 @@ export const ModelingMachineProvider = ({
               length: lengthValue,
             })
             if (err(constraintResult)) return Promise.reject(constraintResult)
-            const { modifiedAst, pathToNodeMap } = constraintResult
+            const { modifiedAst, pathToNodeMap, exprInsertIndex } =
+              constraintResult
             const pResult = parse(recast(modifiedAst))
             if (trap(pResult) || !resultIsOk(pResult))
               return Promise.reject(new Error('Unexpected compilation error'))
             const _modifiedAst = pResult.program
             if (!sketchDetails)
               return Promise.reject(new Error('No sketch details'))
-            const updatedPathToNode = updatePathToNodeFromMap(
-              sketchDetails.sketchPathToNode,
-              pathToNodeMap
-            )
+
+            const {
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
+            } = updateSketchDetailsNodePaths({
+              sketchEntryNodePath: sketchDetails.sketchEntryNodePath,
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              planeNodePath: sketchDetails.planeNodePath,
+              exprInsertIndex,
+            })
             const updatedAst =
               await sceneEntitiesManager.updateAstAndRejigSketch(
-                updatedPathToNode,
+                updatedSketchEntryNodePath,
+                updatedSketchNodePaths,
+                updatedPlaneNodePath,
                 _modifiedAst,
                 sketchDetails.zAxis,
                 sketchDetails.yAxis,
@@ -958,13 +1068,15 @@ export const ModelingMachineProvider = ({
             return {
               selectionType: 'completeSelection',
               selection,
-              updatedPathToNode,
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
             }
           }
         ),
         'Get perpendicular distance info': fromPromise(
           async ({ input: { selectionRanges, sketchDetails } }) => {
-            const { modifiedAst, pathToNodeMap } =
+            const { modifiedAst, pathToNodeMap, exprInsertIndex } =
               await applyConstraintIntersect({
                 selectionRanges,
               })
@@ -974,13 +1086,22 @@ export const ModelingMachineProvider = ({
             const _modifiedAst = pResult.program
             if (!sketchDetails)
               return Promise.reject(new Error('No sketch details'))
-            const updatedPathToNode = updatePathToNodeFromMap(
-              sketchDetails.sketchPathToNode,
-              pathToNodeMap
-            )
+
+            const {
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
+            } = updateSketchDetailsNodePaths({
+              sketchEntryNodePath: sketchDetails.sketchEntryNodePath,
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              planeNodePath: sketchDetails.planeNodePath,
+              exprInsertIndex,
+            })
             const updatedAst =
               await sceneEntitiesManager.updateAstAndRejigSketch(
-                updatedPathToNode,
+                updatedSketchEntryNodePath,
+                updatedSketchNodePaths,
+                updatedPlaneNodePath,
                 _modifiedAst,
                 sketchDetails.zAxis,
                 sketchDetails.yAxis,
@@ -1001,13 +1122,15 @@ export const ModelingMachineProvider = ({
             return {
               selectionType: 'completeSelection',
               selection,
-              updatedPathToNode,
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
             }
           }
         ),
         'Get ABS X info': fromPromise(
           async ({ input: { selectionRanges, sketchDetails } }) => {
-            const { modifiedAst, pathToNodeMap } =
+            const { modifiedAst, pathToNodeMap, exprInsertIndex } =
               await applyConstraintAbsDistance({
                 constraint: 'xAbs',
                 selectionRanges,
@@ -1018,13 +1141,22 @@ export const ModelingMachineProvider = ({
             const _modifiedAst = pResult.program
             if (!sketchDetails)
               return Promise.reject(new Error('No sketch details'))
-            const updatedPathToNode = updatePathToNodeFromMap(
-              sketchDetails.sketchPathToNode,
-              pathToNodeMap
-            )
+
+            const {
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
+            } = updateSketchDetailsNodePaths({
+              sketchEntryNodePath: sketchDetails.sketchEntryNodePath,
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              planeNodePath: sketchDetails.planeNodePath,
+              exprInsertIndex,
+            })
             const updatedAst =
               await sceneEntitiesManager.updateAstAndRejigSketch(
-                updatedPathToNode,
+                updatedSketchEntryNodePath,
+                updatedSketchNodePaths,
+                updatedPlaneNodePath,
                 _modifiedAst,
                 sketchDetails.zAxis,
                 sketchDetails.yAxis,
@@ -1045,13 +1177,15 @@ export const ModelingMachineProvider = ({
             return {
               selectionType: 'completeSelection',
               selection,
-              updatedPathToNode,
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
             }
           }
         ),
         'Get ABS Y info': fromPromise(
           async ({ input: { selectionRanges, sketchDetails } }) => {
-            const { modifiedAst, pathToNodeMap } =
+            const { modifiedAst, pathToNodeMap, exprInsertIndex } =
               await applyConstraintAbsDistance({
                 constraint: 'yAbs',
                 selectionRanges,
@@ -1062,13 +1196,22 @@ export const ModelingMachineProvider = ({
             const _modifiedAst = pResult.program
             if (!sketchDetails)
               return Promise.reject(new Error('No sketch details'))
-            const updatedPathToNode = updatePathToNodeFromMap(
-              sketchDetails.sketchPathToNode,
-              pathToNodeMap
-            )
+
+            const {
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
+            } = updateSketchDetailsNodePaths({
+              sketchEntryNodePath: sketchDetails.sketchEntryNodePath,
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              planeNodePath: sketchDetails.planeNodePath,
+              exprInsertIndex,
+            })
             const updatedAst =
               await sceneEntitiesManager.updateAstAndRejigSketch(
-                updatedPathToNode,
+                updatedSketchEntryNodePath,
+                updatedSketchNodePaths,
+                updatedPlaneNodePath,
                 _modifiedAst,
                 sketchDetails.zAxis,
                 sketchDetails.yAxis,
@@ -1089,7 +1232,9 @@ export const ModelingMachineProvider = ({
             return {
               selectionType: 'completeSelection',
               selection,
-              updatedPathToNode,
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
             }
           }
         ),
@@ -1109,9 +1254,11 @@ export const ModelingMachineProvider = ({
             let result: {
               modifiedAst: Node<Program>
               pathToReplaced: PathToNode | null
+              exprInsertIndex: number
             } = {
               modifiedAst: parsed,
               pathToReplaced: null,
+              exprInsertIndex: -1,
             }
             // If the user provided a constant name,
             // we need to insert the named constant
@@ -1141,6 +1288,7 @@ export const ModelingMachineProvider = ({
               result = {
                 modifiedAst: parseResultAfterInsertion.program,
                 pathToReplaced: astAfterReplacement.pathToReplaced,
+                exprInsertIndex: astAfterReplacement.exprInsertIndex,
               }
             } else if ('valueText' in data.namedValue) {
               // If they didn't provide a constant name,
@@ -1171,10 +1319,22 @@ export const ModelingMachineProvider = ({
             parsed = parsed as Node<Program>
             if (!result.pathToReplaced)
               return Promise.reject(new Error('No path to replaced node'))
+            const {
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
+            } = updateSketchDetailsNodePaths({
+              sketchEntryNodePath: sketchDetails.sketchEntryNodePath,
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              planeNodePath: sketchDetails.planeNodePath,
+              exprInsertIndex: result.exprInsertIndex,
+            })
 
             const updatedAst =
               await sceneEntitiesManager.updateAstAndRejigSketch(
-                result.pathToReplaced || [],
+                updatedSketchEntryNodePath,
+                updatedSketchNodePaths,
+                updatedPlaneNodePath,
                 parsed,
                 sketchDetails.zAxis,
                 sketchDetails.yAxis,
@@ -1195,7 +1355,140 @@ export const ModelingMachineProvider = ({
             return {
               selectionType: 'completeSelection',
               selection,
-              updatedPathToNode: result.pathToReplaced,
+              updatedSketchEntryNodePath,
+              updatedSketchNodePaths,
+              updatedPlaneNodePath,
+            }
+          }
+        ),
+        'set-up-draft-circle': fromPromise(
+          async ({ input: { sketchDetails, data } }) => {
+            if (!sketchDetails || !data)
+              return reject('No sketch details or data')
+            await sceneEntitiesManager.tearDownSketch({ removeAxis: false })
+
+            const result = await sceneEntitiesManager.setupDraftCircle(
+              sketchDetails.sketchEntryNodePath,
+              sketchDetails.sketchNodePaths,
+              sketchDetails.planeNodePath,
+              sketchDetails.zAxis,
+              sketchDetails.yAxis,
+              sketchDetails.origin,
+              data
+            )
+            if (err(result)) return reject(result)
+            await codeManager.updateEditorWithAstAndWriteToFile(kclManager.ast)
+
+            return result
+          }
+        ),
+        'set-up-draft-rectangle': fromPromise(
+          async ({ input: { sketchDetails, data } }) => {
+            if (!sketchDetails || !data)
+              return reject('No sketch details or data')
+            await sceneEntitiesManager.tearDownSketch({ removeAxis: false })
+
+            const result = await sceneEntitiesManager.setupDraftRectangle(
+              sketchDetails.sketchEntryNodePath,
+              sketchDetails.sketchNodePaths,
+              sketchDetails.planeNodePath,
+              sketchDetails.zAxis,
+              sketchDetails.yAxis,
+              sketchDetails.origin,
+              data
+            )
+            if (err(result)) return reject(result)
+            await codeManager.updateEditorWithAstAndWriteToFile(kclManager.ast)
+
+            return result
+          }
+        ),
+        'set-up-draft-center-rectangle': fromPromise(
+          async ({ input: { sketchDetails, data } }) => {
+            if (!sketchDetails || !data)
+              return reject('No sketch details or data')
+            await sceneEntitiesManager.tearDownSketch({ removeAxis: false })
+            const result = await sceneEntitiesManager.setupDraftCenterRectangle(
+              sketchDetails.sketchEntryNodePath,
+              sketchDetails.sketchNodePaths,
+              sketchDetails.planeNodePath,
+              sketchDetails.zAxis,
+              sketchDetails.yAxis,
+              sketchDetails.origin,
+              data
+            )
+            if (err(result)) return reject(result)
+            await codeManager.updateEditorWithAstAndWriteToFile(kclManager.ast)
+
+            return result
+          }
+        ),
+        'setup-client-side-sketch-segments': fromPromise(
+          async ({ input: { sketchDetails, selectionRanges } }) => {
+            if (!sketchDetails) return
+            if (!sketchDetails.sketchEntryNodePath.length) return
+            if (Object.keys(sceneEntitiesManager.activeSegments).length > 0) {
+              sceneEntitiesManager.tearDownSketch({ removeAxis: false })
+            }
+            sceneInfra.resetMouseListeners()
+            await sceneEntitiesManager.setupSketch({
+              sketchEntryNodePath: sketchDetails?.sketchEntryNodePath || [],
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              forward: sketchDetails.zAxis,
+              up: sketchDetails.yAxis,
+              position: sketchDetails.origin,
+              maybeModdedAst: kclManager.ast,
+              selectionRanges,
+            })
+            sceneInfra.resetMouseListeners()
+
+            sceneEntitiesManager.setupSketchIdleCallbacks({
+              sketchEntryNodePath: sketchDetails?.sketchEntryNodePath || [],
+              forward: sketchDetails.zAxis,
+              up: sketchDetails.yAxis,
+              position: sketchDetails.origin,
+              sketchNodePaths: sketchDetails.sketchNodePaths,
+              planeNodePath: sketchDetails.planeNodePath,
+            })
+            return undefined
+          }
+        ),
+        'split-sketch-pipe-if-needed': fromPromise(
+          async ({ input: { sketchDetails } }) => {
+            if (!sketchDetails) return reject('No sketch details')
+            const existingSketchInfoNoOp = {
+              updatedEntryNodePath: sketchDetails.sketchEntryNodePath,
+              updatedSketchNodePaths: sketchDetails.sketchNodePaths,
+              updatedPlaneNodePath: sketchDetails.planeNodePath,
+            } as const
+            if (
+              !sketchDetails.sketchNodePaths.length &&
+              sketchDetails.planeNodePath.length
+            ) {
+              // new sketch, no profiles yet
+              return existingSketchInfoNoOp
+            }
+            const doesNeedSplitting = doesSketchPipeNeedSplitting(
+              kclManager.ast,
+              sketchDetails.sketchEntryNodePath
+            )
+            if (err(doesNeedSplitting)) return reject(doesNeedSplitting)
+            if (!doesNeedSplitting) return existingSketchInfoNoOp
+
+            const splitResult = splitPipedProfile(
+              kclManager.ast,
+              sketchDetails.sketchEntryNodePath
+            )
+            if (err(splitResult)) return reject(splitResult)
+
+            await kclManager.executeAstMock(splitResult.modifiedAst)
+            await codeManager.updateEditorWithAstAndWriteToFile(
+              splitResult.modifiedAst
+            )
+            return {
+              updatedEntryNodePath: splitResult.pathToProfile,
+              updatedSketchNodePaths: [splitResult.pathToProfile],
+              updatedPlaneNodePath: sketchDetails.planeNodePath,
             }
           }
         ),

src/components/ModelingSidebar/ModelingPane.tsx

@@ -6,6 +6,7 @@ import Tooltip from 'components/Tooltip'
 import { CustomIconName } from 'components/CustomIcon'
 import { IconDefinition } from '@fortawesome/free-solid-svg-icons'
 import { ActionIcon } from 'components/ActionIcon'
+import { onboardingPaths } from 'routes/Onboarding/paths'
 
 export interface ModelingPaneProps {
   id: string
@@ -70,7 +71,7 @@ export const ModelingPane = ({
   const { settings } = useSettingsAuthContext()
   const onboardingStatus = settings.context.app.onboardingStatus
   const pointerEventsCssClass =
-    onboardingStatus.current === 'camera'
+    onboardingStatus.current === onboardingPaths.CAMERA
       ? 'pointer-events-none '
       : 'pointer-events-auto '
   return (

src/components/ModelingSidebar/ModelingSidebar.tsx

@@ -19,6 +19,7 @@ import { useCommandsContext } from 'hooks/useCommandsContext'
 import { IconDefinition } from '@fortawesome/free-solid-svg-icons'
 import { useKclContext } from 'lang/KclProvider'
 import { MachineManagerContext } from 'components/MachineManagerProvider'
+import { onboardingPaths } from 'routes/Onboarding/paths'
 
 interface ModelingSidebarProps {
   paneOpacity: '' | 'opacity-20' | 'opacity-40'
@@ -41,7 +42,7 @@ export function ModelingSidebar({ paneOpacity }: ModelingSidebarProps) {
   const onboardingStatus = settings.context.app.onboardingStatus
   const { send, context } = useModelingContext()
   const pointerEventsCssClass =
-    onboardingStatus.current === 'camera' ||
+    onboardingStatus.current === onboardingPaths.CAMERA ||
     context.store?.openPanes.length === 0
       ? 'pointer-events-none '
       : 'pointer-events-auto '

src/components/Spinner.tsx

@@ -2,7 +2,12 @@ import { SVGProps } from 'react'
 
 export const Spinner = (props: SVGProps<SVGSVGElement>) => {
   return (
-    <svg viewBox="0 0 10 10" className={'w-8 h-8'} {...props}>
+    <svg
+      data-testid="spinner"
+      viewBox="0 0 10 10"
+      className={'w-8 h-8'}
+      {...props}
+    >
       <circle
         cx="5"
         cy="5"

src/components/Stream.tsx

@@ -20,6 +20,7 @@ import { IndexLoaderData } from 'lib/types'
 import { useCommandsContext } from 'hooks/useCommandsContext'
 import { err, reportRejection } from 'lib/trap'
 import { getArtifactOfTypes } from 'lang/std/artifactGraph'
+import { ViewControlContextMenu } from './ViewControlMenu'
 
 enum StreamState {
   Playing = 'playing',
@@ -30,6 +31,7 @@ enum StreamState {
 
 export const Stream = () => {
   const [isLoading, setIsLoading] = useState(true)
+  const videoWrapperRef = useRef<HTMLDivElement>(null)
   const videoRef = useRef<HTMLVideoElement>(null)
   const { settings } = useSettingsAuthContext()
   const { state, send } = useModelingContext()
@@ -258,7 +260,7 @@ export const Stream = () => {
     setIsLoading(false)
   }, [mediaStream])
 
-  const handleMouseUp: MouseEventHandler<HTMLDivElement> = (e) => {
+  const handleClick: MouseEventHandler<HTMLDivElement> = (e) => {
     // If we've got no stream or connection, don't do anything
     if (!isNetworkOkay) return
     if (!videoRef.current) return
@@ -320,10 +322,11 @@ export const Stream = () => {
 
   return (
     <div
+      ref={videoWrapperRef}
       className="absolute inset-0 z-0"
       id="stream"
       data-testid="stream"
-      onClick={handleMouseUp}
+      onClick={handleClick}
       onDoubleClick={enterSketchModeIfSelectingSketch}
       onContextMenu={(e) => e.preventDefault()}
       onContextMenuCapture={(e) => e.preventDefault()}
@@ -384,6 +387,14 @@ export const Stream = () => {
           </Loading>
         </div>
       )}
+      <ViewControlContextMenu
+        event="mouseup"
+        guard={(e) =>
+          sceneInfra.camControls.wasDragging === false &&
+          btnName(e).right === true
+        }
+        menuTargetElement={videoWrapperRef}
+      />
     </div>
   )
 }

src/components/Toolbar/Intersect.tsx

@@ -136,6 +136,7 @@ export async function applyConstraintIntersect({
 }): Promise<{
   modifiedAst: Node<Program>
   pathToNodeMap: PathToNodeMap
+  exprInsertIndex: number
 }> {
   const info = intersectInfo({
     selectionRanges,
@@ -174,6 +175,7 @@ export async function applyConstraintIntersect({
     return {
       modifiedAst,
       pathToNodeMap,
+      exprInsertIndex: -1,
     }
   }
   // transform again but forcing certain values
@@ -192,6 +194,7 @@ export async function applyConstraintIntersect({
   const { modifiedAst: _modifiedAst, pathToNodeMap: _pathToNodeMap } =
     transform2
 
+  let exprInsertIndex = -1
   if (variableName) {
     const newBody = [..._modifiedAst.body]
     newBody.splice(
@@ -204,9 +207,11 @@ export async function applyConstraintIntersect({
       const index = pathToNode.findIndex((a) => a[0] === 'body') + 1
       pathToNode[index][0] = Number(pathToNode[index][0]) + 1
     })
+    exprInsertIndex = newVariableInsertIndex
   }
   return {
     modifiedAst: _modifiedAst,
     pathToNodeMap: _pathToNodeMap,
+    exprInsertIndex,
   }
 }

src/components/Toolbar/RemoveConstrainingValues.tsx

@@ -28,7 +28,7 @@ export function removeConstrainingValuesInfo({
   | Error {
   const _nodes = selectionRanges.graphSelections.map(({ codeRef }) => {
     const tmp = getNodeFromPath<Expr>(kclManager.ast, codeRef.pathToNode)
-    if (err(tmp)) return tmp
+    if (tmp instanceof Error) return tmp
     return tmp.node
   })
   const _err1 = _nodes.find(err)

src/components/Toolbar/SetAbsDistance.tsx

@@ -93,6 +93,7 @@ export async function applyConstraintAbsDistance({
 }): Promise<{
   modifiedAst: Program
   pathToNodeMap: PathToNodeMap
+  exprInsertIndex: number
 }> {
   const info = absDistanceInfo({
     selectionRanges,
@@ -132,6 +133,7 @@ export async function applyConstraintAbsDistance({
   if (err(transform2)) return Promise.reject(transform2)
   const { modifiedAst: _modifiedAst, pathToNodeMap } = transform2
 
+  let exprInsertIndex = -1
   if (variableName) {
     const newBody = [..._modifiedAst.body]
     newBody.splice(
@@ -144,8 +146,9 @@ export async function applyConstraintAbsDistance({
       const index = pathToNode.findIndex((a) => a[0] === 'body') + 1
       pathToNode[index][0] = Number(pathToNode[index][0]) + 1
     })
+    exprInsertIndex = newVariableInsertIndex
   }
-  return { modifiedAst: _modifiedAst, pathToNodeMap }
+  return { modifiedAst: _modifiedAst, pathToNodeMap, exprInsertIndex }
 }
 
 export function applyConstraintAxisAlign({

src/components/Toolbar/SetAngleBetween.tsx

@@ -86,6 +86,7 @@ export async function applyConstraintAngleBetween({
 }): Promise<{
   modifiedAst: Program
   pathToNodeMap: PathToNodeMap
+  exprInsertIndex: number
 }> {
   const info = angleBetweenInfo({ selectionRanges })
   if (err(info)) return Promise.reject(info)
@@ -122,6 +123,7 @@ export async function applyConstraintAngleBetween({
     return {
       modifiedAst,
       pathToNodeMap,
+      exprInsertIndex: -1,
     }
   }
 
@@ -141,6 +143,7 @@ export async function applyConstraintAngleBetween({
   const { modifiedAst: _modifiedAst, pathToNodeMap: _pathToNodeMap } =
     transformed2
 
+  let exprInsertIndex = -1
   if (variableName) {
     const newBody = [..._modifiedAst.body]
     newBody.splice(
@@ -153,9 +156,11 @@ export async function applyConstraintAngleBetween({
       const index = pathToNode.findIndex((a) => a[0] === 'body') + 1
       pathToNode[index][0] = Number(pathToNode[index][0]) + 1
     })
+    exprInsertIndex = newVariableInsertIndex
   }
   return {
     modifiedAst: _modifiedAst,
     pathToNodeMap: _pathToNodeMap,
+    exprInsertIndex,
   }
 }

src/components/Toolbar/SetHorzVertDistance.tsx

@@ -87,15 +87,13 @@ export function horzVertDistanceInfo({
 export async function applyConstraintHorzVertDistance({
   selectionRanges,
   constraint,
-  // TODO align will always be false (covered by synconous applyConstraintHorzVertAlign), remove it
-  isAlign = false,
 }: {
   selectionRanges: Selections
   constraint: 'setHorzDistance' | 'setVertDistance'
-  isAlign?: false
 }): Promise<{
   modifiedAst: Program
   pathToNodeMap: PathToNodeMap
+  exprInsertIndex: number
 }> {
   const info = horzVertDistanceInfo({
     selectionRanges: selectionRanges,
@@ -133,13 +131,12 @@ export async function applyConstraintHorzVertDistance({
     return {
       modifiedAst,
       pathToNodeMap,
+      exprInsertIndex: -1,
     }
   } else {
     if (!isExprBinaryPart(valueNode))
       return Promise.reject('Invalid valueNode, is not a BinaryPart')
-    let finalValue = isAlign
-      ? createLiteral(0)
-      : removeDoubleNegatives(valueNode, sign, variableName)
+    let finalValue = removeDoubleNegatives(valueNode, sign, variableName)
     // transform again but forcing certain values
     const transformed = transformSecondarySketchLinesTagFirst({
       ast: kclManager.ast,
@@ -152,6 +149,7 @@ export async function applyConstraintHorzVertDistance({
 
     if (err(transformed)) return Promise.reject(transformed)
     const { modifiedAst: _modifiedAst, pathToNodeMap } = transformed
+    let exprInsertIndex = -1
     if (variableName) {
       const newBody = [..._modifiedAst.body]
       newBody.splice(
@@ -164,10 +162,12 @@ export async function applyConstraintHorzVertDistance({
         const index = pathToNode.findIndex((a) => a[0] === 'body') + 1
         pathToNode[index][0] = Number(pathToNode[index][0]) + 1
       })
+      exprInsertIndex = newVariableInsertIndex
     }
     return {
       modifiedAst: _modifiedAst,
       pathToNodeMap,
+      exprInsertIndex,
     }
   }
 }

src/components/Toolbar/setAngleLength.tsx

@@ -70,10 +70,14 @@ export async function applyConstraintLength({
 }: {
   length: KclCommandValue
   selectionRanges: Selections
-}) {
+}): Promise<{
+  modifiedAst: Program
+  pathToNodeMap: PathToNodeMap
+  exprInsertIndex: number
+}> {
   const ast = kclManager.ast
   const angleLength = angleLengthInfo({ selectionRanges })
-  if (err(angleLength)) return angleLength
+  if (err(angleLength)) return Promise.reject(angleLength)
   const { transforms } = angleLength
 
   let distanceExpression: Expr = length.valueAst
@@ -94,7 +98,7 @@ export async function applyConstraintLength({
   }
 
   if (!isExprBinaryPart(distanceExpression)) {
-    return new Error('Invalid valueNode, is not a BinaryPart')
+    return Promise.reject('Invalid valueNode, is not a BinaryPart')
   }
 
   const retval = transformAstSketchLines({
@@ -112,6 +116,12 @@ export async function applyConstraintLength({
   return {
     modifiedAst: _modifiedAst,
     pathToNodeMap,
+    exprInsertIndex:
+      'variableName' in length &&
+      length.variableName &&
+      length.insertIndex !== undefined
+        ? length.insertIndex
+        : -1,
   }
 }
 
@@ -124,6 +134,7 @@ export async function applyConstraintAngleLength({
 }): Promise<{
   modifiedAst: Program
   pathToNodeMap: PathToNodeMap
+  exprInsertIndex: number
 }> {
   const angleLength = angleLengthInfo({ selectionRanges, angleOrLength })
   if (err(angleLength)) return Promise.reject(angleLength)
@@ -208,5 +219,6 @@ export async function applyConstraintAngleLength({
   return {
     modifiedAst: _modifiedAst,
     pathToNodeMap,
+    exprInsertIndex: variableName ? newVariableInsertIndex : -1,
   }
 }

src/components/ViewControlMenu.tsx

@@ -0,0 +1,66 @@
+import { reportRejection } from 'lib/trap'
+import {
+  ContextMenu,
+  ContextMenuDivider,
+  ContextMenuItem,
+  ContextMenuItemRefresh,
+  ContextMenuProps,
+} from './ContextMenu'
+import { AxisNames, VIEW_NAMES_SEMANTIC } from 'lib/constants'
+import { useModelingContext } from 'hooks/useModelingContext'
+import { useMemo } from 'react'
+import { sceneInfra } from 'lib/singletons'
+
+export function useViewControlMenuItems() {
+  const { send: modelingSend } = useModelingContext()
+  const menuItems = useMemo(
+    () => [
+      ...Object.entries(VIEW_NAMES_SEMANTIC).map(([axisName, axisSemantic]) => (
+        <ContextMenuItem
+          key={axisName}
+          onClick={() => {
+            sceneInfra.camControls
+              .updateCameraToAxis(axisName as AxisNames)
+              .catch(reportRejection)
+          }}
+        >
+          {axisSemantic} view
+        </ContextMenuItem>
+      )),
+      <ContextMenuDivider />,
+      <ContextMenuItem
+        onClick={() => {
+          sceneInfra.camControls.resetCameraPosition().catch(reportRejection)
+        }}
+      >
+        Reset view
+      </ContextMenuItem>,
+      <ContextMenuItem
+        onClick={() => {
+          modelingSend({ type: 'Center camera on selection' })
+        }}
+      >
+        Center view on selection
+      </ContextMenuItem>,
+      <ContextMenuDivider />,
+      <ContextMenuItemRefresh />,
+    ],
+    [VIEW_NAMES_SEMANTIC]
+  )
+  return menuItems
+}
+
+export function ViewControlContextMenu({
+  menuTargetElement: wrapperRef,
+  ...props
+}: ContextMenuProps) {
+  const menuItems = useViewControlMenuItems()
+  return (
+    <ContextMenu
+      data-testid="view-controls-menu"
+      menuTargetElement={wrapperRef}
+      items={menuItems}
+      {...props}
+    />
+  )
+}

src/editor/plugins/lsp/kcl/colors.ts

@@ -0,0 +1,327 @@
+import {
+  EditorView,
+  WidgetType,
+  ViewUpdate,
+  ViewPlugin,
+  DecorationSet,
+  Decoration,
+} from '@codemirror/view'
+import { Range, Extension, Text } from '@codemirror/state'
+import { NodeProp, Tree } from '@lezer/common'
+import { language, syntaxTree } from '@codemirror/language'
+
+interface PickerState {
+  from: number
+  to: number
+  alpha: string
+  colorType: ColorType
+}
+
+export interface WidgetOptions extends PickerState {
+  color: string
+}
+
+export type ColorData = Omit<WidgetOptions, 'from' | 'to'>
+
+const pickerState = new WeakMap<HTMLInputElement, PickerState>()
+
+export enum ColorType {
+  hex = 'HEX',
+}
+
+const hexRegex = /(^|\b)(#[0-9a-f]{3,9})(\b|$)/i
+
+function discoverColorsInKCL(
+  syntaxTree: Tree,
+  from: number,
+  to: number,
+  typeName: string,
+  doc: Text,
+  language?: string
+): WidgetOptions | Array<WidgetOptions> | null {
+  switch (typeName) {
+    case 'Program':
+    case 'VariableDeclaration':
+    case 'CallExpression':
+    case 'ObjectExpression':
+    case 'ObjectProperty':
+    case 'ArgumentList':
+    case 'PipeExpression': {
+      let innerTree = syntaxTree.resolveInner(from, 0).tree
+
+      if (!innerTree) {
+        innerTree = syntaxTree.resolveInner(from, 1).tree
+        if (!innerTree) {
+          return null
+        }
+      }
+
+      const overlayTree = innerTree.prop(NodeProp.mounted)?.tree
+
+      if (overlayTree?.type.name !== 'Styles') {
+        return null
+      }
+
+      const ret: Array<WidgetOptions> = []
+      overlayTree.iterate({
+        from: 0,
+        to: overlayTree.length,
+        enter: ({ type, from: overlayFrom, to: overlayTo }) => {
+          const maybeWidgetOptions = discoverColorsInKCL(
+            syntaxTree,
+            // We add one because the tree doesn't include the
+            // quotation mark from the style tag
+            from + 1 + overlayFrom,
+            from + 1 + overlayTo,
+            type.name,
+            doc,
+            language
+          )
+
+          if (maybeWidgetOptions) {
+            if (Array.isArray(maybeWidgetOptions)) {
+              console.error('Unexpected nested overlays')
+              ret.push(...maybeWidgetOptions)
+            } else {
+              ret.push(maybeWidgetOptions)
+            }
+          }
+        },
+      })
+
+      return ret
+    }
+
+    case 'String': {
+      const result = parseColorLiteral(doc.sliceString(from, to))
+      if (!result) {
+        return null
+      }
+      return {
+        ...result,
+        from,
+        to,
+      }
+    }
+
+    default:
+      return null
+  }
+}
+
+export function parseColorLiteral(colorLiteral: string): ColorData | null {
+  const literal = colorLiteral.replace(/"/g, '')
+  const match = hexRegex.exec(literal)
+  if (!match) {
+    return null
+  }
+  const [color, alpha] = toFullHex(literal)
+
+  return {
+    colorType: ColorType.hex,
+    color,
+    alpha,
+  }
+}
+
+function colorPickersDecorations(
+  view: EditorView,
+  discoverColors: typeof discoverColorsInKCL
+) {
+  const widgets: Array<Range<Decoration>> = []
+
+  const st = syntaxTree(view.state)
+
+  for (const range of view.visibleRanges) {
+    st.iterate({
+      from: range.from,
+      to: range.to,
+      enter: ({ type, from, to }) => {
+        const maybeWidgetOptions = discoverColors(
+          st,
+          from,
+          to,
+          type.name,
+          view.state.doc,
+          view.state.facet(language)?.name
+        )
+
+        if (!maybeWidgetOptions) {
+          return
+        }
+
+        if (!Array.isArray(maybeWidgetOptions)) {
+          widgets.push(
+            Decoration.widget({
+              widget: new ColorPickerWidget(maybeWidgetOptions),
+              side: 1,
+            }).range(maybeWidgetOptions.from)
+          )
+
+          return
+        }
+
+        for (const wo of maybeWidgetOptions) {
+          widgets.push(
+            Decoration.widget({
+              widget: new ColorPickerWidget(wo),
+              side: 1,
+            }).range(wo.from)
+          )
+        }
+      },
+    })
+  }
+
+  return Decoration.set(widgets)
+}
+
+function toFullHex(color: string): string[] {
+  if (color.length === 4) {
+    // 3-char hex
+    return [
+      `#${color[1].repeat(2)}${color[2].repeat(2)}${color[3].repeat(2)}`,
+      '',
+    ]
+  }
+
+  if (color.length === 5) {
+    // 4-char hex (alpha)
+    return [
+      `#${color[1].repeat(2)}${color[2].repeat(2)}${color[3].repeat(2)}`,
+      color[4].repeat(2),
+    ]
+  }
+
+  if (color.length === 9) {
+    // 8-char hex (alpha)
+    return [`#${color.slice(1, -2)}`, color.slice(-2)]
+  }
+
+  return [color, '']
+}
+
+export const wrapperClassName = 'cm-css-color-picker-wrapper'
+
+class ColorPickerWidget extends WidgetType {
+  private readonly state: PickerState
+  private readonly color: string
+
+  constructor({ color, ...state }: WidgetOptions) {
+    super()
+    this.state = state
+    this.color = color
+  }
+
+  eq(other: ColorPickerWidget) {
+    return (
+      other.state.colorType === this.state.colorType &&
+      other.color === this.color &&
+      other.state.from === this.state.from &&
+      other.state.to === this.state.to &&
+      other.state.alpha === this.state.alpha
+    )
+  }
+
+  toDOM() {
+    const picker = document.createElement('input')
+    pickerState.set(picker, this.state)
+    picker.type = 'color'
+    picker.value = this.color
+
+    const wrapper = document.createElement('span')
+    wrapper.appendChild(picker)
+    wrapper.className = wrapperClassName
+
+    return wrapper
+  }
+
+  ignoreEvent() {
+    return false
+  }
+}
+
+export const colorPickerTheme = EditorView.baseTheme({
+  [`.${wrapperClassName}`]: {
+    display: 'inline-block',
+    outline: '1px solid #eee',
+    marginRight: '0.6ch',
+    height: '1em',
+    width: '1em',
+    transform: 'translateY(1px)',
+  },
+  [`.${wrapperClassName} input[type="color"]`]: {
+    cursor: 'pointer',
+    height: '100%',
+    width: '100%',
+    padding: 0,
+    border: 'none',
+    '&::-webkit-color-swatch-wrapper': {
+      padding: 0,
+    },
+    '&::-webkit-color-swatch': {
+      border: 'none',
+    },
+    '&::-moz-color-swatch': {
+      border: 'none',
+    },
+  },
+})
+
+interface IFactoryOptions {
+  discoverColors: typeof discoverColorsInKCL
+}
+
+export const makeColorPicker = (options: IFactoryOptions) =>
+  ViewPlugin.fromClass(
+    class ColorPickerViewPlugin {
+      decorations: DecorationSet
+
+      constructor(view: EditorView) {
+        this.decorations = colorPickersDecorations(view, options.discoverColors)
+      }
+
+      update(update: ViewUpdate) {
+        if (update.docChanged || update.viewportChanged) {
+          this.decorations = colorPickersDecorations(
+            update.view,
+            options.discoverColors
+          )
+        }
+      }
+    },
+    {
+      decorations: (v) => v.decorations,
+      eventHandlers: {
+        change: (e, view) => {
+          const target = e.target as HTMLInputElement
+          if (
+            target.nodeName !== 'INPUT' ||
+            !target.parentElement ||
+            !target.parentElement.classList.contains(wrapperClassName)
+          ) {
+            return false
+          }
+
+          const data = pickerState.get(target)!
+
+          let converted = '"' + target.value + data.alpha + '"'
+
+          view.dispatch({
+            changes: {
+              from: data.from,
+              to: data.to,
+              insert: converted,
+            },
+          })
+
+          return true
+        },
+      },
+    }
+  )
+
+export const colorPicker: Extension = [
+  makeColorPicker({ discoverColors: discoverColorsInKCL }),
+  colorPickerTheme,
+]

src/editor/plugins/lsp/kcl/language.ts

@@ -17,6 +17,7 @@ import { kclPlugin } from '.'
 import type * as LSP from 'vscode-languageserver-protocol'
 // @ts-ignore: No types available
 import { parser } from './kcl.grammar'
+import { colorPicker } from './colors'
 
 export interface LanguageOptions {
   workspaceFolders: LSP.WorkspaceFolder[]
@@ -54,14 +55,14 @@ export const KclLanguage = LRLanguage.define({
 })
 
 export function kcl(options: LanguageOptions) {
-  return new LanguageSupport(
-    KclLanguage,
+  return new LanguageSupport(KclLanguage, [
+    colorPicker,
     kclPlugin({
       documentUri: options.documentUri,
       workspaceFolders: options.workspaceFolders,
       allowHTMLContent: true,
       client: options.client,
       processLspNotification: options.processLspNotification,
-    })
-  )
+    }),
+  ])
 }

src/lang/KclSingleton.ts

@@ -311,8 +311,6 @@ export class KclManager {
     // Do not send send scene commands if the program was interrupted, go to clean up
     if (!isInterrupted) {
       this.addDiagnostics(await lintAst({ ast: ast }))
-
-      sceneInfra.modelingSend({ type: 'code edit during sketch' })
       setSelectionFilterToDefault(execState.memory, this.engineCommandManager)
 
       if (args.zoomToFit) {
@@ -358,7 +356,11 @@ export class KclManager {
       this.lastSuccessfulProgramMemory = execState.memory
     }
     this.ast = { ...ast }
+    // updateArtifactGraph relies on updated executeState/programMemory
+    await this.engineCommandManager.updateArtifactGraph(this.ast)
     this._executeCallback()
+    if (!isInterrupted)
+      sceneInfra.modelingSend({ type: 'code edit during sketch' })
     this.engineCommandManager.addCommandLog({
       type: 'execution-done',
       data: null,
@@ -400,6 +402,7 @@ export class KclManager {
 
     this._logs = logs
     this.addDiagnostics(kclErrorsToDiagnostics(errors))
+
     this._execState = execState
     this._programMemory = execState.memory
     if (!errors.length) {
@@ -411,7 +414,7 @@ export class KclManager {
     // problem this solves, but either way we should strive to remove it.
     Array.from(this.engineCommandManager.artifactGraph).forEach(
       ([commandId, artifact]) => {
-        if (!('codeRef' in artifact)) return
+        if (!('codeRef' in artifact && artifact.codeRef)) return
         const _node1 = getNodeFromPath<Node<CallExpression>>(
           this.ast,
           artifact.codeRef.pathToNode,

src/lang/artifact.test.ts

@@ -22,6 +22,7 @@ const mySketch001 = startSketchOn('XY')
       value: {
         type: 'Sketch',
         on: expect.any(Object),
+        originalId: expect.any(String),
         start: {
           to: [0, 0],
           from: [0, 0],
@@ -91,6 +92,7 @@ const mySketch001 = startSketchOn('XY')
       ],
       sketch: {
         id: expect.any(String),
+        originalId: expect.any(String),
         __meta: expect.any(Array),
         on: expect.any(Object),
         start: expect.any(Object),
@@ -185,6 +187,7 @@ const sk2 = startSketchOn('XY')
         ],
         sketch: {
           id: expect.any(String),
+          originalId: expect.any(String),
           __meta: expect.any(Array),
           on: expect.any(Object),
           start: expect.any(Object),
@@ -277,6 +280,7 @@ const sk2 = startSketchOn('XY')
         ],
         sketch: {
           id: expect.any(String),
+          originalId: expect.any(String),
           __meta: expect.any(Array),
           on: expect.any(Object),
           start: expect.any(Object),

src/lang/executor.test.ts

@@ -160,6 +160,7 @@ const newVar = myVar + 1`
       value: {
         type: 'Sketch',
         on: expect.any(Object),
+        originalId: expect.any(String),
         start: {
           to: [0, 0],
           from: [0, 0],

src/lang/langHelpers.ts

@@ -1,6 +1,6 @@
 import {
   Program,
-  _executor,
+  executor,
   ProgramMemory,
   kclLint,
   emptyExecState,
@@ -64,12 +64,9 @@ export async function executeAst({
   try {
     const execState = await (programMemoryOverride
       ? enginelessExecutor(ast, programMemoryOverride)
-      : _executor(ast, engineCommandManager))
-
-    await engineCommandManager.waitForAllCommands(
-      programMemoryOverride !== undefined
-    )
+      : executor(ast, engineCommandManager))
 
+    await engineCommandManager.waitForAllCommands()
     return {
       logs: [],
       errors: [],

src/lang/modifyAst.test.ts

@@ -16,6 +16,7 @@ import {
   deleteSegmentFromPipeExpression,
   removeSingleConstraintInfo,
   deleteFromSelection,
+  splitPipedProfile,
 } from './modifyAst'
 import { enginelessExecutor } from '../lib/testHelpers'
 import { findUsesOfTagInPipe, getNodePathFromSourceRange } from './queryAst'
@@ -918,3 +919,63 @@ sketch002 = startSketchOn({
     }
   )
 })
+
+describe('Testing splitPipedProfile', () => {
+  it('should split the pipe expression correctly', () => {
+    const codeBefore = `part001 = startSketchOn('XZ')
+  |> startProfileAt([1, 2], %)
+  |> line([3, 4], %)
+  |> line([5, 6], %)
+  |> close(%)
+extrude001 = extrude(5, part001)
+    `
+
+    const expectedCodeAfter = `sketch001 = startSketchOn('XZ')
+part001 = startProfileAt([1, 2], sketch001)
+  |> line([3, 4], %)
+  |> line([5, 6], %)
+  |> close(%)
+extrude001 = extrude(5, part001)
+    `
+
+    const ast = assertParse(codeBefore)
+
+    const codeOfInterest = `startSketchOn('XZ')`
+    const range: [number, number, boolean] = [
+      codeBefore.indexOf(codeOfInterest),
+      codeBefore.indexOf(codeOfInterest) + codeOfInterest.length,
+      true,
+    ]
+    const pathToPipe = getNodePathFromSourceRange(ast, range)
+
+    const result = splitPipedProfile(ast, pathToPipe)
+
+    if (err(result)) throw result
+
+    const newCode = recast(result.modifiedAst)
+    if (err(newCode)) throw newCode
+    expect(newCode.trim()).toBe(expectedCodeAfter.trim())
+  })
+  it('should return error for already split pipe', () => {
+    const codeBefore = `sketch001 = startSketchOn('XZ')
+part001 = startProfileAt([1, 2], sketch001)
+  |> line([3, 4], %)
+  |> line([5, 6], %)
+  |> close(%)
+extrude001 = extrude(5, part001)
+    `
+
+    const ast = assertParse(codeBefore)
+
+    const codeOfInterest = `startProfileAt([1, 2], sketch001)`
+    const range: [number, number, boolean] = [
+      codeBefore.indexOf(codeOfInterest),
+      codeBefore.indexOf(codeOfInterest) + codeOfInterest.length,
+      true,
+    ]
+    const pathToPipe = getNodePathFromSourceRange(ast, range)
+
+    const result = splitPipedProfile(ast, pathToPipe)
+    expect(result instanceof Error).toBe(true)
+  })
+})

src/lang/modifyAst.ts

@@ -29,6 +29,8 @@ import {
   getNodePathFromSourceRange,
   isNodeSafeToReplace,
   traverse,
+  getBodyIndex,
+  isCallExprWithName,
 } from './queryAst'
 import { addTagForSketchOnFace, getConstraintInfo } from './std/sketch'
 import {
@@ -46,6 +48,7 @@ import { Models } from '@kittycad/lib'
 import { ExtrudeFacePlane } from 'machines/modelingMachine'
 import { Node } from 'wasm-lib/kcl/bindings/Node'
 import { KclExpressionWithVariable } from 'lib/commandTypes'
+import { Artifact, getPathsFromArtifact } from './std/artifactGraph'
 
 export function startSketchOnDefault(
   node: Node<Program>,
@@ -78,41 +81,54 @@ export function startSketchOnDefault(
   }
 }
 
-export function addStartProfileAt(
+export function insertNewStartProfileAt(
   node: Node<Program>,
-  pathToNode: PathToNode,
-  at: [number, number]
-): { modifiedAst: Node<Program>; pathToNode: PathToNode } | Error {
-  const _node1 = getNodeFromPath<VariableDeclaration>(
-    node,
-    pathToNode,
-    'VariableDeclaration'
-  )
-  if (err(_node1)) return _node1
-  const variableDeclaration = _node1.node
-  if (variableDeclaration.type !== 'VariableDeclaration') {
-    return new Error('variableDeclaration.init.type !== PipeExpression')
+  sketchEntryNodePath: PathToNode,
+  sketchNodePaths: PathToNode[],
+  planeNodePath: PathToNode,
+  at: [number, number],
+  insertType: 'start' | 'end' = 'end'
+):
+  | {
+      modifiedAst: Node<Program>
+      updatedSketchNodePaths: PathToNode[]
+      updatedEntryNodePath: PathToNode
     }
-  const _node = { ...node }
-  const init = variableDeclaration.declaration.init
-  const startProfileAt = createCallExpressionStdLib('startProfileAt', [
+  | Error {
+  const varDec = getNodeFromPath<VariableDeclarator>(
+    node,
+    planeNodePath,
+    'VariableDeclarator'
+  )
+  if (err(varDec)) return varDec
+  if (varDec.node.type !== 'VariableDeclarator') return new Error('not a var')
+
+  const newExpression = createVariableDeclaration(
+    findUniqueName(node, 'profile'),
+    createCallExpressionStdLib('startProfileAt', [
       createArrayExpression([
         createLiteral(roundOff(at[0])),
         createLiteral(roundOff(at[1])),
       ]),
-    createPipeSubstitution(),
+      createIdentifier(varDec.node.id.name),
     ])
-  if (init.type === 'PipeExpression') {
-    init.body.splice(1, 0, startProfileAt)
-  } else {
-    variableDeclaration.declaration.init = createPipeExpression([
-      init,
-      startProfileAt,
-    ])
-  }
+  )
+  const insertIndex = getInsertIndex(sketchNodePaths, planeNodePath, insertType)
+
+  const _node = structuredClone(node)
+  // TODO the rest of this function will not be robust to work for sketches defined within a function declaration
+  _node.body.splice(insertIndex, 0, newExpression)
+
+  const { updatedEntryNodePath, updatedSketchNodePaths } =
+    updateSketchNodePathsWithInsertIndex({
+      insertIndex,
+      insertType,
+      sketchNodePaths,
+    })
   return {
     modifiedAst: _node,
-    pathToNode,
+    updatedSketchNodePaths,
+    updatedEntryNodePath,
   }
 }
 
@@ -253,7 +269,7 @@ export function mutateObjExpProp(
 export function extrudeSketch(
   node: Node<Program>,
   pathToNode: PathToNode,
-  shouldPipe = false,
+  artifact?: Artifact,
   distance: Expr = createLiteral(4)
 ):
   | {
@@ -262,10 +278,14 @@ export function extrudeSketch(
       pathToExtrudeArg: PathToNode
     }
   | Error {
+  const orderedSketchNodePaths = getPathsFromArtifact({
+    artifact: artifact,
+    sketchPathToNode: pathToNode,
+  })
+  if (err(orderedSketchNodePaths)) return orderedSketchNodePaths
   const _node = structuredClone(node)
   const _node1 = getNodeFromPath(_node, pathToNode)
   if (err(_node1)) return _node1
-  const { node: sketchExpression } = _node1
 
   // determine if sketchExpression is in a pipeExpression or not
   const _node2 = getNodeFromPath<PipeExpression>(
@@ -274,9 +294,6 @@ export function extrudeSketch(
     'PipeExpression'
   )
   if (err(_node2)) return _node2
-  const { node: pipeExpression } = _node2
-
-  const isInPipeExpression = pipeExpression.type === 'PipeExpression'
 
   const _node3 = getNodeFromPath<VariableDeclarator>(
     _node,
@@ -284,49 +301,23 @@ export function extrudeSketch(
     'VariableDeclarator'
   )
   if (err(_node3)) return _node3
-  const { node: variableDeclarator, shallowPath: pathToDecleration } = _node3
+  const { node: variableDeclarator } = _node3
 
   const extrudeCall = createCallExpressionStdLib('extrude', [
     distance,
-    shouldPipe
-      ? createPipeSubstitution()
-      : createIdentifier(variableDeclarator.id.name),
+    createIdentifier(variableDeclarator.id.name),
   ])
 
-  if (shouldPipe) {
-    const pipeChain = createPipeExpression(
-      isInPipeExpression
-        ? [...pipeExpression.body, extrudeCall]
-        : [sketchExpression as any, extrudeCall]
-    )
-
-    variableDeclarator.init = pipeChain
-    const pathToExtrudeArg: PathToNode = [
-      ...pathToDecleration,
-      ['init', 'VariableDeclarator'],
-      ['body', ''],
-      [pipeChain.body.length - 1, 'index'],
-      ['arguments', 'CallExpression'],
-      [0, 'index'],
-    ]
-
-    return {
-      modifiedAst: _node,
-      pathToNode,
-      pathToExtrudeArg,
-    }
-  }
-
   // We're not creating a pipe expression,
   // but rather a separate constant for the extrusion
   const name = findUniqueName(node, KCL_DEFAULT_CONSTANT_PREFIXES.EXTRUDE)
   const VariableDeclaration = createVariableDeclaration(name, extrudeCall)
 
-  const sketchIndexInPathToNode =
-    pathToDecleration.findIndex((a) => a[0] === 'body') + 1
-  const sketchIndexInBody = pathToDecleration[
-    sketchIndexInPathToNode
-  ][0] as number
+  const lastSketchNodePath =
+    orderedSketchNodePaths[orderedSketchNodePaths.length - 1]
+
+  console.log('lastSketchNodePath', lastSketchNodePath, orderedSketchNodePaths)
+  const sketchIndexInBody = Number(lastSketchNodePath[1][0])
   _node.body.splice(sketchIndexInBody + 1, 0, VariableDeclaration)
 
   const pathToExtrudeArg: PathToNode = [
@@ -1295,7 +1286,8 @@ export async function deleteFromSelection(
     const pipeBody = varDec.node.init.body
     if (
       pipeBody[0].type === 'CallExpression' &&
-      pipeBody[0].callee.name === 'startSketchOn'
+      (pipeBody[0].callee.name === 'startSketchOn' ||
+        pipeBody[0].callee.name === 'startProfileAt')
     ) {
       // remove varDec
       const varDecIndex = varDec.shallowPath[1][0] as number
@@ -1310,3 +1302,149 @@ export async function deleteFromSelection(
 const nonCodeMetaEmpty = () => {
   return { nonCodeNodes: {}, startNodes: [], start: 0, end: 0 }
 }
+
+export function getInsertIndex(
+  sketchNodePaths: PathToNode[],
+  planeNodePath: PathToNode,
+  insertType: 'start' | 'end'
+) {
+  let minIndex = 0
+  let maxIndex = 0
+  for (const path of sketchNodePaths) {
+    const index = Number(path[1][0])
+    if (index < minIndex) minIndex = index
+    if (index > maxIndex) maxIndex = index
+  }
+
+  const insertIndex = !sketchNodePaths.length
+    ? Number(planeNodePath[1][0]) + 1
+    : insertType === 'start'
+    ? minIndex
+    : maxIndex + 1
+  return insertIndex
+}
+
+export function updateSketchNodePathsWithInsertIndex({
+  insertIndex,
+  insertType,
+  sketchNodePaths,
+}: {
+  insertIndex: number
+  insertType: 'start' | 'end'
+  sketchNodePaths: PathToNode[]
+}): {
+  updatedEntryNodePath: PathToNode
+  updatedSketchNodePaths: PathToNode[]
+} {
+  // TODO the rest of this function will not be robust to work for sketches defined within a function declaration
+  const newExpressionPathToNode: PathToNode = [
+    ['body', ''],
+    [insertIndex, 'index'],
+    ['declaration', 'VariableDeclaration'],
+    ['init', 'VariableDeclarator'],
+  ]
+  let updatedSketchNodePaths = structuredClone(sketchNodePaths)
+  if (insertType === 'start') {
+    updatedSketchNodePaths = updatedSketchNodePaths.map((path) => {
+      path[1][0] = Number(path[1][0]) + 1
+      return path
+    })
+    updatedSketchNodePaths.unshift(newExpressionPathToNode)
+  } else {
+    updatedSketchNodePaths.push(newExpressionPathToNode)
+  }
+  return {
+    updatedSketchNodePaths,
+    updatedEntryNodePath: newExpressionPathToNode,
+  }
+}
+
+/**
+ * 
+ * Split the following pipe expression into 
+ * ```ts
+ * part001 = startSketchOn('XZ')
+  |> startProfileAt([1, 2], %)
+  |> line([3, 4], %)
+  |> line([5, 6], %)
+  |> close(%)
+extrude001 = extrude(5, part001)
+```
+into
+```ts
+sketch001 = startSketchOn('XZ')
+part001 = startProfileAt([1, 2], sketch001)
+  |> line([3, 4], %)
+  |> line([5, 6], %)
+  |> close(%)
+extrude001 = extrude(5, part001)
+```
+Notice that the `startSketchOn` is what gets the new variable name, this is so part001 still has the same data as before
+making it safe for later code that uses part001 (the extrude in this example)
+ * 
+ */
+export function splitPipedProfile(
+  ast: Program,
+  pathToPipe: PathToNode
+):
+  | {
+      modifiedAst: Program
+      pathToProfile: PathToNode
+      pathToPlane: PathToNode
+    }
+  | Error {
+  const _ast = structuredClone(ast)
+  const varDec = getNodeFromPath<VariableDeclaration>(
+    _ast,
+    pathToPipe,
+    'VariableDeclaration'
+  )
+  if (err(varDec)) return varDec
+  if (
+    varDec.node.type !== 'VariableDeclaration' ||
+    varDec.node.declaration.init.type !== 'PipeExpression'
+  ) {
+    return new Error('pathToNode does not point to pipe')
+  }
+  const init = varDec.node.declaration.init
+  const firstCall = init.body[0]
+  if (!isCallExprWithName(firstCall, 'startSketchOn'))
+    return new Error('First call is not startSketchOn')
+  const secondCall = init.body[1]
+  if (!isCallExprWithName(secondCall, 'startProfileAt'))
+    return new Error('Second call is not startProfileAt')
+
+  const varName = varDec.node.declaration.id.name
+  const newVarName = findUniqueName(_ast, 'sketch')
+  const secondCallArgs = structuredClone(secondCall.arguments)
+  secondCallArgs[1] = createIdentifier(newVarName)
+  const firstCallOfNewPipe = createCallExpression(
+    'startProfileAt',
+    secondCallArgs
+  )
+  const newSketch = createVariableDeclaration(
+    newVarName,
+    varDec.node.declaration.init.body[0]
+  )
+  const newProfile = createVariableDeclaration(
+    varName,
+    varDec.node.declaration.init.body.length <= 2
+      ? firstCallOfNewPipe
+      : createPipeExpression([
+          firstCallOfNewPipe,
+          ...varDec.node.declaration.init.body.slice(2),
+        ])
+  )
+  const index = getBodyIndex(pathToPipe)
+  if (err(index)) return index
+  _ast.body.splice(index, 1, newSketch, newProfile)
+  const pathToPlane = structuredClone(pathToPipe)
+  const pathToProfile = structuredClone(pathToPipe)
+  pathToProfile[1][0] = index + 1
+
+  return {
+    modifiedAst: _ast,
+    pathToProfile,
+    pathToPlane,
+  }
+}

src/lang/modifyAst/addEdgeTreatment.test.ts

@@ -247,7 +247,7 @@ extrude003 = extrude(-15, sketch003)`
       selectedSegmentSnippet,
       expectedExtrudeSnippet
     )
-  })
+  }, 5_000)
 })
 
 const runModifyAstCloneWithEdgeTreatmentAndTag = async (
@@ -275,7 +275,7 @@ const runModifyAstCloneWithEdgeTreatmentAndTag = async (
   const selection: Selections = {
     graphSelections: segmentRanges.map((segmentRange) => {
       const maybeArtifact = [...artifactGraph].find(([, a]) => {
-        if (!('codeRef' in a)) return false
+        if (!('codeRef' in a && a.codeRef)) return false
         return isOverlap(a.codeRef.range, segmentRange)
       })
       return {
@@ -477,7 +477,7 @@ extrude001 = extrude(-15, sketch001)
   |> lineTo([profileStartX(%), profileStartY(%)], %)
   |> close(%)
 extrude001 = extrude(-15, sketch001)
-  |> chamfer({ length: 5, tags: [seg01] }, %)`
+  |> chamfer({ length = 5, tags = [seg01] }, %)`
         const segmentSnippets = ['line([-20, 0], %)']
         const expectedCode = `sketch001 = startSketchOn('XY')
   |> startProfileAt([-10, 10], %)
@@ -487,8 +487,8 @@ extrude001 = extrude(-15, sketch001)
   |> lineTo([profileStartX(%), profileStartY(%)], %)
   |> close(%)
 extrude001 = extrude(-15, sketch001)
-  |> chamfer({ length: 5, tags: [seg01] }, %)
-  |> ${edgeTreatmentType}({ ${parameterName}: 3, tags: [seg02] }, %)`
+  |> chamfer({ length = 5, tags = [seg01] }, %)
+  |> ${edgeTreatmentType}({ ${parameterName} = 3, tags = [seg02] }, %)`
 
         await runModifyAstCloneWithEdgeTreatmentAndTag(
           code,

src/lang/modifyAst/addRevolve.ts

@@ -5,7 +5,6 @@ import {
   PathToNode,
   Expr,
   CallExpression,
-  PipeExpression,
   VariableDeclarator,
 } from 'lang/wasm'
 import { Selections } from 'lib/selections'
@@ -15,7 +14,6 @@ import {
   createCallExpressionStdLib,
   createObjectExpression,
   createIdentifier,
-  createPipeExpression,
   findUniqueName,
   createVariableDeclaration,
 } from 'lang/modifyAst'
@@ -24,12 +22,13 @@ import {
   mutateAstWithTagForSketchSegment,
   getEdgeTagCall,
 } from 'lang/modifyAst/addEdgeTreatment'
+import { Artifact, getPathsFromArtifact } from 'lang/std/artifactGraph'
 export function revolveSketch(
   ast: Node<Program>,
   pathToSketchNode: PathToNode,
-  shouldPipe = false,
   angle: Expr = createLiteral(4),
-  axis: Selections
+  axis: Selections,
+  artifact?: Artifact
 ):
   | {
       modifiedAst: Node<Program>
@@ -37,6 +36,11 @@ export function revolveSketch(
       pathToRevolveArg: PathToNode
     }
   | Error {
+  const orderedSketchNodePaths = getPathsFromArtifact({
+    artifact: artifact,
+    sketchPathToNode: pathToSketchNode,
+  })
+  if (err(orderedSketchNodePaths)) return orderedSketchNodePaths
   const clonedAst = structuredClone(ast)
   const sketchNode = getNodeFromPath(clonedAst, pathToSketchNode)
   if (err(sketchNode)) return sketchNode
@@ -67,29 +71,13 @@ export function revolveSketch(
   if (err(tagResult)) return tagResult
   const { tag } = tagResult
 
-  /* Original Code */
-  const { node: sketchExpression } = sketchNode
-
-  // determine if sketchExpression is in a pipeExpression or not
-  const sketchPipeExpressionNode = getNodeFromPath<PipeExpression>(
-    clonedAst,
-    pathToSketchNode,
-    'PipeExpression'
-  )
-  if (err(sketchPipeExpressionNode)) return sketchPipeExpressionNode
-  const { node: sketchPipeExpression } = sketchPipeExpressionNode
-  const isInPipeExpression = sketchPipeExpression.type === 'PipeExpression'
-
   const sketchVariableDeclaratorNode = getNodeFromPath<VariableDeclarator>(
     clonedAst,
     pathToSketchNode,
     'VariableDeclarator'
   )
   if (err(sketchVariableDeclaratorNode)) return sketchVariableDeclaratorNode
-  const {
-    node: sketchVariableDeclarator,
-    shallowPath: sketchPathToDecleration,
-  } = sketchVariableDeclaratorNode
+  const { node: sketchVariableDeclarator } = sketchVariableDeclaratorNode
 
   const axisSelection = axis?.graphSelections[0]?.artifact
 
@@ -103,37 +91,13 @@ export function revolveSketch(
     createIdentifier(sketchVariableDeclarator.id.name),
   ])
 
-  if (shouldPipe) {
-    const pipeChain = createPipeExpression(
-      isInPipeExpression
-        ? [...sketchPipeExpression.body, revolveCall]
-        : [sketchExpression as any, revolveCall]
-    )
-
-    sketchVariableDeclarator.init = pipeChain
-    const pathToRevolveArg: PathToNode = [
-      ...sketchPathToDecleration,
-      ['init', 'VariableDeclarator'],
-      ['body', ''],
-      [pipeChain.body.length - 1, 'index'],
-      ['arguments', 'CallExpression'],
-      [0, 'index'],
-    ]
-
-    return {
-      modifiedAst: clonedAst,
-      pathToSketchNode,
-      pathToRevolveArg,
-    }
-  }
-
   // We're not creating a pipe expression,
   // but rather a separate constant for the extrusion
   const name = findUniqueName(clonedAst, KCL_DEFAULT_CONSTANT_PREFIXES.REVOLVE)
   const VariableDeclaration = createVariableDeclaration(name, revolveCall)
-  const sketchIndexInPathToNode =
-    sketchPathToDecleration.findIndex((a) => a[0] === 'body') + 1
-  const sketchIndexInBody = sketchPathToDecleration[sketchIndexInPathToNode][0]
+  const lastSketchNodePath =
+    orderedSketchNodePaths[orderedSketchNodePaths.length - 1]
+  const sketchIndexInBody = Number(lastSketchNodePath[1][0])
   if (typeof sketchIndexInBody !== 'number')
     return new Error('expected sketchIndexInBody to be a number')
   clonedAst.body.splice(sketchIndexInBody + 1, 0, VariableDeclaration)

src/lang/queryAst.ts

@@ -33,6 +33,7 @@ import { err, Reason } from 'lib/trap'
 import { ImportStatement } from 'wasm-lib/kcl/bindings/ImportStatement'
 import { Node } from 'wasm-lib/kcl/bindings/Node'
 import { ArtifactGraph, codeRefFromRange } from './std/artifactGraph'
+import { FunctionExpression } from 'wasm-lib/kcl/bindings/FunctionExpression'
 
 /**
  * Retrieves a node from a given path within a Program node structure, optionally stopping at a specified node type.
@@ -596,7 +597,13 @@ export function findAllPreviousVariables(
 type ReplacerFn = (
   _ast: Node<Program>,
   varName: string
-) => { modifiedAst: Node<Program>; pathToReplaced: PathToNode } | Error
+) =>
+  | {
+      modifiedAst: Node<Program>
+      pathToReplaced: PathToNode
+      exprInsertIndex: number
+    }
+  | Error
 
 export function isNodeSafeToReplacePath(
   ast: Program,
@@ -648,7 +655,7 @@ export function isNodeSafeToReplacePath(
     if (err(_nodeToReplace)) return _nodeToReplace
     const nodeToReplace = _nodeToReplace.node as any
     nodeToReplace[last[0]] = identifier
-    return { modifiedAst: _ast, pathToReplaced }
+    return { modifiedAst: _ast, pathToReplaced, exprInsertIndex: index }
   }
 
   const hasPipeSub = isTypeInValue(finVal as Expr, 'PipeSubstitution')
@@ -767,8 +774,15 @@ export function isLinesParallelAndConstrained(
     if (err(_primarySegment)) return _primarySegment
     const primarySegment = _primarySegment.segment
 
+    const _varDec2 = getNodeFromPath(ast, secondaryPath, 'VariableDeclaration')
+    if (err(_varDec2)) return _varDec2
+    const varDec2 = _varDec2.node
+    const varName2 = (varDec2 as VariableDeclaration)?.declaration.id?.name
+    const sg2 = sketchFromKclValue(programMemory?.get(varName2), varName2)
+    if (err(sg2)) return sg2
+
     const _segment = getSketchSegmentFromSourceRange(
-      sg,
+      sg2,
       secondaryLine?.codeRef?.range
     )
     if (err(_segment)) return _segment
@@ -1101,3 +1115,57 @@ export function getObjExprProperty(
   if (index === -1) return null
   return { expr: node.properties[index].value, index }
 }
+
+export function isCursorInFunctionDefinition(
+  ast: Node<Program>,
+  selectionRanges: Selection
+): boolean {
+  if (!selectionRanges?.codeRef?.pathToNode) return false
+  const node = getNodeFromPath<FunctionExpression>(
+    ast,
+    selectionRanges.codeRef.pathToNode,
+    'FunctionExpression'
+  )
+  if (err(node)) return false
+  if (node.node.type === 'FunctionExpression') return true
+  return false
+}
+
+export function getBodyIndex(pathToNode: PathToNode): number | Error {
+  const index = Number(pathToNode[1][0])
+  if (Number.isInteger(index)) return index
+  return new Error('Expected number index')
+}
+
+export function isCallExprWithName(
+  expr: Expr | CallExpression,
+  name: string
+): expr is CallExpression {
+  if (expr.type === 'CallExpression' && expr.callee.type === 'Identifier') {
+    return expr.callee.name === name
+  }
+  return false
+}
+
+export function doesSketchPipeNeedSplitting(
+  ast: Node<Program>,
+  pathToPipe: PathToNode
+): boolean | Error {
+  const varDec = getNodeFromPath<VariableDeclarator>(
+    ast,
+    pathToPipe,
+    'VariableDeclarator'
+  )
+  if (err(varDec)) return varDec
+  if (varDec.node.type !== 'VariableDeclarator') return new Error('Not a var')
+  const pipeExpression = varDec.node.init
+  if (pipeExpression.type !== 'PipeExpression') return false
+  const [firstPipe, secondPipe] = pipeExpression.body
+  if (!firstPipe || !secondPipe) return false
+  if (
+    isCallExprWithName(firstPipe, 'startSketchOn') &&
+    isCallExprWithName(secondPipe, 'startProfileAt')
+  )
+    return true
+  return false
+}

src/lang/std/__snapshots__/artifactGraph.test.ts.snap

@@ -13,7 +13,7 @@ Map {
       "range": [
         12,
         31,
-        0,
+        true,
       ],
     },
     "id": "UUID",
@@ -33,7 +33,7 @@ Map {
       "range": [
         37,
         64,
-        0,
+        true,
       ],
     },
     "id": "UUID",
@@ -60,7 +60,7 @@ Map {
       "range": [
         70,
         86,
-        0,
+        true,
       ],
     },
     "edgeIds": [
@@ -83,7 +83,7 @@ Map {
       "range": [
         92,
         119,
-        0,
+        true,
       ],
     },
     "edgeCutId": "UUID",
@@ -107,7 +107,7 @@ Map {
       "range": [
         125,
         150,
-        0,
+        true,
       ],
     },
     "edgeIds": [
@@ -130,7 +130,7 @@ Map {
       "range": [
         156,
         203,
-        0,
+        true,
       ],
     },
     "edgeIds": [
@@ -153,7 +153,7 @@ Map {
       "range": [
         209,
         217,
-        0,
+        true,
       ],
     },
     "edgeIds": [],
@@ -177,7 +177,7 @@ Map {
       "range": [
         231,
         254,
-        0,
+        true,
       ],
     },
     "edgeIds": [
@@ -212,6 +212,7 @@ Map {
     "type": "wall",
   },
   "UUID-10" => {
+    "codeRef": undefined,
     "edgeCutEdgeIds": [],
     "id": "UUID",
     "pathIds": [
@@ -320,7 +321,7 @@ Map {
       "range": [
         260,
         299,
-        0,
+        true,
       ],
     },
     "consumedEdgeId": "UUID",
@@ -340,7 +341,7 @@ Map {
       "range": [
         350,
         377,
-        0,
+        true,
       ],
     },
     "id": "UUID",
@@ -366,7 +367,7 @@ Map {
       "range": [
         383,
         398,
-        0,
+        true,
       ],
     },
     "edgeIds": [
@@ -389,7 +390,7 @@ Map {
       "range": [
         404,
         420,
-        0,
+        true,
       ],
     },
     "edgeIds": [
@@ -412,7 +413,7 @@ Map {
       "range": [
         426,
         473,
-        0,
+        true,
       ],
     },
     "edgeIds": [
@@ -435,7 +436,7 @@ Map {
       "range": [
         479,
         487,
-        0,
+        true,
       ],
     },
     "edgeIds": [],
@@ -459,7 +460,7 @@ Map {
       "range": [
         501,
         522,
-        0,
+        true,
       ],
     },
     "edgeIds": [
@@ -478,7 +479,6 @@ Map {
       "UUID",
       "UUID",
       "UUID",
-      "UUID",
     ],
     "type": "sweep",
   },
@@ -507,14 +507,6 @@ Map {
     "type": "wall",
   },
   "UUID-34" => {
-    "edgeCutEdgeIds": [],
-    "id": "UUID",
-    "pathIds": [],
-    "subType": "start",
-    "sweepId": "UUID",
-    "type": "cap",
-  },
-  "UUID-35" => {
     "edgeCutEdgeIds": [],
     "id": "UUID",
     "pathIds": [],
@@ -522,42 +514,42 @@ Map {
     "sweepId": "UUID",
     "type": "cap",
   },
-  "UUID-36" => {
+  "UUID-35" => {
     "id": "UUID",
     "segId": "UUID",
     "subType": "opposite",
     "sweepId": "UUID",
     "type": "sweepEdge",
   },
+  "UUID-36" => {
+    "id": "UUID",
+    "segId": "UUID",
+    "subType": "adjacent",
+    "sweepId": "UUID",
+    "type": "sweepEdge",
+  },
   "UUID-37" => {
     "id": "UUID",
     "segId": "UUID",
-    "subType": "adjacent",
+    "subType": "opposite",
     "sweepId": "UUID",
     "type": "sweepEdge",
   },
   "UUID-38" => {
     "id": "UUID",
     "segId": "UUID",
-    "subType": "opposite",
+    "subType": "adjacent",
     "sweepId": "UUID",
     "type": "sweepEdge",
   },
   "UUID-39" => {
-    "id": "UUID",
-    "segId": "UUID",
-    "subType": "adjacent",
-    "sweepId": "UUID",
-    "type": "sweepEdge",
-  },
-  "UUID-40" => {
     "id": "UUID",
     "segId": "UUID",
     "subType": "opposite",
     "sweepId": "UUID",
     "type": "sweepEdge",
   },
-  "UUID-41" => {
+  "UUID-40" => {
     "id": "UUID",
     "segId": "UUID",
     "subType": "adjacent",

src/lang/std/artifactGraph.test.ts

@@ -22,6 +22,7 @@ import * as d3 from 'd3-force'
 import path from 'path'
 import pixelmatch from 'pixelmatch'
 import { PNG } from 'pngjs'
+import { Node } from 'wasm-lib/kcl/bindings/Node'
 
 /*
 Note this is an integration test, these tests connect to our real dev server and make websocket commands.
@@ -171,7 +172,7 @@ afterAll(() => {
 
 describe('testing createArtifactGraph', () => {
   describe('code with offset planes and a sketch:', () => {
-    let ast: Program
+    let ast: Node<Program>
     let theMap: ReturnType<typeof createArtifactGraph>
 
     it('setup', () => {
@@ -217,7 +218,7 @@ describe('testing createArtifactGraph', () => {
     })
   })
   describe('code with an extrusion, fillet and sketch of face:', () => {
-    let ast: Program
+    let ast: Node<Program>
     let theMap: ReturnType<typeof createArtifactGraph>
     it('setup', () => {
       // putting this logic in here because describe blocks runs before beforeAll has finished
@@ -259,11 +260,13 @@ describe('testing createArtifactGraph', () => {
         if (err(extrusion)) throw extrusion
         expect(extrusion.type).toBe('sweep')
         const firstExtrusionIsACubeIE6Sides = 6
-        const secondExtrusionIsATriangularPrismIE5Sides = 5
+        // Each face of the triangular prism (5), but without the bottom cap.
+        // The engine doesn't generate that.
+        const secondExtrusionIsATriangularPrism = 4
         expect(extrusion.surfaces.length).toBe(
           !index
             ? firstExtrusionIsACubeIE6Sides
-            : secondExtrusionIsATriangularPrismIE5Sides
+            : secondExtrusionIsATriangularPrism
         )
       })
     })
@@ -310,7 +313,7 @@ describe('testing createArtifactGraph', () => {
   })
 
   describe(`code with sketches but no extrusions or other 3D elements`, () => {
-    let ast: Program
+    let ast: Node<Program>
     let theMap: ReturnType<typeof createArtifactGraph>
     it(`setup`, () => {
       // putting this logic in here because describe blocks runs before beforeAll has finished
@@ -375,7 +378,7 @@ describe('testing createArtifactGraph', () => {
 
 describe('capture graph of sketchOnFaceOnFace...', () => {
   describe('code with an extrusion, fillet and sketch of face:', () => {
-    let ast: Program
+    let ast: Node<Program>
     let theMap: ReturnType<typeof createArtifactGraph>
     it('setup', async () => {
       // putting this logic in here because describe blocks runs before beforeAll has finished
@@ -397,7 +400,9 @@ describe('capture graph of sketchOnFaceOnFace...', () => {
   })
 })
 
-function getCommands(codeKey: CodeKey): CacheShape[CodeKey] & { ast: Program } {
+function getCommands(
+  codeKey: CodeKey
+): CacheShape[CodeKey] & { ast: Node<Program> } {
   const ast = assertParse(codeKey)
   const file = fs.readFileSync(fullPath, 'utf-8')
   const parsed: CacheShape = JSON.parse(file)
@@ -659,7 +664,7 @@ describe('testing getArtifactsToUpdate', () => {
         sweepId: '',
         codeRef: {
           pathToNode: [['body', '']],
-          range: [37, 64, 0],
+          range: [37, 64, true],
         },
       },
     ])
@@ -672,7 +677,7 @@ describe('testing getArtifactsToUpdate', () => {
         surfaceIds: [],
         edgeIds: [],
         codeRef: {
-          range: [231, 254, 0],
+          range: [231, 254, true],
           pathToNode: [['body', '']],
         },
       },
@@ -683,7 +688,7 @@ describe('testing getArtifactsToUpdate', () => {
         planeId: expect.any(String),
         sweepId: expect.any(String),
         codeRef: {
-          range: [37, 64, 0],
+          range: [37, 64, true],
           pathToNode: [['body', '']],
         },
         solid2dId: expect.any(String),
@@ -697,7 +702,7 @@ describe('testing getArtifactsToUpdate', () => {
         surfaceId: '',
         edgeIds: [],
         codeRef: {
-          range: [70, 86, 0],
+          range: [70, 86, true],
           pathToNode: [['body', '']],
         },
       },
@@ -708,7 +713,7 @@ describe('testing getArtifactsToUpdate', () => {
         planeId: expect.any(String),
         sweepId: expect.any(String),
         codeRef: {
-          range: [37, 64, 0],
+          range: [37, 64, true],
           pathToNode: [['body', '']],
         },
         solid2dId: expect.any(String),
@@ -723,7 +728,7 @@ describe('testing getArtifactsToUpdate', () => {
         edgeIds: [],
         surfaceId: '',
         codeRef: {
-          range: [260, 299, 0],
+          range: [260, 299, true],
           pathToNode: [['body', '']],
         },
       },
@@ -734,7 +739,7 @@ describe('testing getArtifactsToUpdate', () => {
         surfaceId: expect.any(String),
         edgeIds: expect.any(Array),
         codeRef: {
-          range: [92, 119, 0],
+          range: [92, 119, true],
           pathToNode: [['body', '']],
         },
         edgeCutId: expect.any(String),
@@ -756,7 +761,7 @@ describe('testing getArtifactsToUpdate', () => {
         surfaceId: expect.any(String),
         edgeIds: expect.any(Array),
         codeRef: {
-          range: [156, 203, 0],
+          range: [156, 203, true],
           pathToNode: [['body', '']],
         },
       },
@@ -768,7 +773,7 @@ describe('testing getArtifactsToUpdate', () => {
         surfaceIds: expect.any(Array),
         edgeIds: expect.any(Array),
         codeRef: {
-          range: [231, 254, 0],
+          range: [231, 254, true],
           pathToNode: [['body', '']],
         },
       },
@@ -787,7 +792,7 @@ describe('testing getArtifactsToUpdate', () => {
         surfaceId: expect.any(String),
         edgeIds: expect.any(Array),
         codeRef: {
-          range: [125, 150, 0],
+          range: [125, 150, true],
           pathToNode: [['body', '']],
         },
       },
@@ -799,7 +804,7 @@ describe('testing getArtifactsToUpdate', () => {
         surfaceIds: expect.any(Array),
         edgeIds: expect.any(Array),
         codeRef: {
-          range: [231, 254, 0],
+          range: [231, 254, true],
           pathToNode: [['body', '']],
         },
       },
@@ -818,7 +823,7 @@ describe('testing getArtifactsToUpdate', () => {
         surfaceId: expect.any(String),
         edgeIds: expect.any(Array),
         codeRef: {
-          range: [92, 119, 0],
+          range: [92, 119, true],
           pathToNode: [['body', '']],
         },
         edgeCutId: expect.any(String),
@@ -831,7 +836,7 @@ describe('testing getArtifactsToUpdate', () => {
         surfaceIds: expect.any(Array),
         edgeIds: expect.any(Array),
         codeRef: {
-          range: [231, 254, 0],
+          range: [231, 254, true],
           pathToNode: [['body', '']],
         },
       },
@@ -850,7 +855,7 @@ describe('testing getArtifactsToUpdate', () => {
         surfaceId: expect.any(String),
         edgeIds: expect.any(Array),
         codeRef: {
-          range: [70, 86, 0],
+          range: [70, 86, true],
           pathToNode: [['body', '']],
         },
       },
@@ -862,7 +867,7 @@ describe('testing getArtifactsToUpdate', () => {
         surfaceIds: expect.any(Array),
         edgeIds: expect.any(Array),
         codeRef: {
-          range: [231, 254, 0],
+          range: [231, 254, true],
           pathToNode: [['body', '']],
         },
       },
@@ -882,7 +887,7 @@ describe('testing getArtifactsToUpdate', () => {
         surfaceIds: expect.any(Array),
         edgeIds: expect.any(Array),
         codeRef: {
-          range: [231, 254, 0],
+          range: [231, 254, true],
           pathToNode: [['body', '']],
         },
       },
@@ -902,7 +907,7 @@ describe('testing getArtifactsToUpdate', () => {
         surfaceIds: expect.any(Array),
         edgeIds: expect.any(Array),
         codeRef: {
-          range: [231, 254, 0],
+          range: [231, 254, true],
           pathToNode: [['body', '']],
         },
       },

src/lang/std/artifactGraph.ts

@@ -1,7 +1,19 @@
-import { PathToNode, Program, SourceRange } from 'lang/wasm'
+import {
+  Expr,
+  PathToNode,
+  Program,
+  SourceRange,
+  VariableDeclaration,
+} from 'lang/wasm'
 import { Models } from '@kittycad/lib'
-import { getNodePathFromSourceRange } from 'lang/queryAst'
+import {
+  getNodeFromPath,
+  getNodePathFromSourceRange,
+  traverse,
+} from 'lang/queryAst'
 import { err } from 'lib/trap'
+import { engineCommandManager, kclManager } from 'lib/singletons'
+import { Node } from 'wasm-lib/kcl/bindings/Node'
 
 export type ArtifactId = string
 
@@ -34,14 +46,14 @@ export interface PathArtifact extends BaseArtifact {
   codeRef: CodeRef
 }
 
-interface solid2D extends BaseArtifact {
+interface Solid2DArtifact extends BaseArtifact {
   type: 'solid2D'
   pathId: ArtifactId
 }
 export interface PathArtifactRich extends BaseArtifact {
   type: 'path'
   /** A path must always lie on a plane */
-  plane: PlaneArtifact | WallArtifact
+  plane: PlaneArtifact | WallArtifact | CapArtifact
   /** A path must always contain 0 or more segments */
   segments: Array<SegmentArtifact>
   /** A path may not result in a sweep artifact */
@@ -61,7 +73,7 @@ interface SegmentArtifactRich extends BaseArtifact {
   type: 'segment'
   path: PathArtifact
   surf: WallArtifact
-  edges: Array<SweepEdge>
+  edges: Array<SweepEdgeArtifact>
   edgeCut?: EdgeCut
   codeRef: CodeRef
 }
@@ -80,7 +92,7 @@ interface SweepArtifactRich extends BaseArtifact {
   subType: 'extrusion' | 'revolve'
   path: PathArtifact
   surfaces: Array<WallArtifact | CapArtifact>
-  edges: Array<SweepEdge>
+  edges: Array<SweepEdgeArtifact>
   codeRef: CodeRef
 }
 
@@ -90,6 +102,9 @@ interface WallArtifact extends BaseArtifact {
   edgeCutEdgeIds: Array<ArtifactId>
   sweepId: ArtifactId
   pathIds: Array<ArtifactId>
+  // codeRef is for the sketchOnFace plane, not for the wall itself
+  // traverse to the extrude and or segment to get the wall's codeRef
+  codeRef?: CodeRef
 }
 interface CapArtifact extends BaseArtifact {
   type: 'cap'
@@ -97,9 +112,12 @@ interface CapArtifact extends BaseArtifact {
   edgeCutEdgeIds: Array<ArtifactId>
   sweepId: ArtifactId
   pathIds: Array<ArtifactId>
+  // codeRef is for the sketchOnFace plane, not for the wall itself
+  // traverse to the extrude and or segment to get the wall's codeRef
+  codeRef?: CodeRef
 }
 
-interface SweepEdge extends BaseArtifact {
+interface SweepEdgeArtifact extends BaseArtifact {
   type: 'sweepEdge'
   segId: ArtifactId
   sweepId: ArtifactId
@@ -129,10 +147,10 @@ export type Artifact =
   | SweepArtifact
   | WallArtifact
   | CapArtifact
-  | SweepEdge
+  | SweepEdgeArtifact
   | EdgeCut
   | EdgeCutEdge
-  | solid2D
+  | Solid2DArtifact
 
 export type ArtifactGraph = Map<ArtifactId, Artifact>
 
@@ -159,7 +177,7 @@ export function createArtifactGraph({
 }: {
   orderedCommands: Array<OrderedCommand>
   responseMap: ResponseMap
-  ast: Program
+  ast: Node<Program>
 }) {
   const myMap = new Map<ArtifactId, Artifact>()
 
@@ -238,7 +256,7 @@ export function getArtifactsToUpdate({
   /** Passing in a getter because we don't wan this function to update the map directly */
   getArtifact: (id: ArtifactId) => Artifact | undefined
   currentPlaneId: ArtifactId
-  ast: Program
+  ast: Node<Program>
 }): Array<{
   id: ArtifactId
   artifact: Artifact
@@ -274,6 +292,13 @@ export function getArtifactsToUpdate({
       plane?.type === 'plane' ? plane?.codeRef : { range, pathToNode }
     const existingPlane = getArtifact(currentPlaneId)
     if (existingPlane?.type === 'wall') {
+      let existingPlaneCodeRef = existingPlane.codeRef
+      if (!existingPlaneCodeRef) {
+        const astWalkCodeRef = getWallOrCapPlaneCodeRef(ast, codeRef.pathToNode)
+        if (!err(astWalkCodeRef)) {
+          existingPlaneCodeRef = astWalkCodeRef
+        }
+      }
       return [
         {
           id: currentPlaneId,
@@ -284,6 +309,29 @@ export function getArtifactsToUpdate({
             edgeCutEdgeIds: existingPlane.edgeCutEdgeIds,
             sweepId: existingPlane.sweepId,
             pathIds: existingPlane.pathIds,
+            codeRef: existingPlaneCodeRef,
+          },
+        },
+      ]
+    } else if (existingPlane?.type === 'cap') {
+      let existingPlaneCodeRef = existingPlane.codeRef
+      if (!existingPlaneCodeRef) {
+        const astWalkCodeRef = getWallOrCapPlaneCodeRef(ast, codeRef.pathToNode)
+        if (!err(astWalkCodeRef)) {
+          existingPlaneCodeRef = astWalkCodeRef
+        }
+      }
+      return [
+        {
+          id: currentPlaneId,
+          artifact: {
+            type: 'cap',
+            subType: existingPlane.subType,
+            id: currentPlaneId,
+            edgeCutEdgeIds: existingPlane.edgeCutEdgeIds,
+            sweepId: existingPlane.sweepId,
+            pathIds: existingPlane.pathIds,
+            codeRef: existingPlaneCodeRef,
           },
         },
       ]
@@ -328,6 +376,18 @@ export function getArtifactsToUpdate({
           pathIds: [id],
         },
       })
+    } else if (plane?.type === 'cap') {
+      returnArr.push({
+        id: currentPlaneId,
+        artifact: {
+          type: 'cap',
+          id: currentPlaneId,
+          subType: plane.subType,
+          edgeCutEdgeIds: plane.edgeCutEdgeIds,
+          sweepId: plane.sweepId,
+          pathIds: [id],
+        },
+      })
     }
     return returnArr
   } else if (cmd.type === 'extend_path' || cmd.type === 'close_path') {
@@ -733,7 +793,7 @@ export function getCapCodeRef(
 }
 
 export function getSolid2dCodeRef(
-  solid2D: solid2D,
+  solid2D: Solid2DArtifact,
   artifactGraph: ArtifactGraph
 ): CodeRef | Error {
   const path = getArtifactOfTypes(
@@ -757,7 +817,7 @@ export function getWallCodeRef(
 }
 
 export function getSweepEdgeCodeRef(
-  edge: SweepEdge,
+  edge: SweepEdgeArtifact,
   artifactGraph: ArtifactGraph
 ): CodeRef | Error {
   const seg = getArtifactOfTypes(
@@ -872,14 +932,280 @@ export function codeRefFromRange(range: SourceRange, ast: Program): CodeRef {
   }
 }
 
-export function isSolid2D(artifact: Artifact): artifact is solid2D {
-  return (artifact as solid2D).pathId !== undefined
+function getPlaneFromPath(
+  path: PathArtifact,
+  graph: ArtifactGraph
+): PlaneArtifact | WallArtifact | CapArtifact | Error {
+  const plane = getArtifactOfTypes(
+    { key: path.planeId, types: ['plane', 'wall', 'cap'] },
+    graph
+  )
+  if (err(plane)) return plane
+  return plane
 }
 
-export function isSegment(artifact: Artifact): artifact is SegmentArtifact {
-  return (artifact as SegmentArtifact).pathId !== undefined
+function getPlaneFromSegment(
+  segment: SegmentArtifact,
+  graph: ArtifactGraph
+): PlaneArtifact | WallArtifact | CapArtifact | Error {
+  const path = getArtifactOfTypes(
+    { key: segment.pathId, types: ['path'] },
+    graph
+  )
+  if (err(path)) return path
+  return getPlaneFromPath(path, graph)
+}
+function getPlaneFromSolid2D(
+  solid2D: Solid2DArtifact,
+  graph: ArtifactGraph
+): PlaneArtifact | WallArtifact | CapArtifact | Error {
+  const path = getArtifactOfTypes(
+    { key: solid2D.pathId, types: ['path'] },
+    graph
+  )
+  if (err(path)) return path
+  return getPlaneFromPath(path, graph)
+}
+function getPlaneFromCap(
+  cap: CapArtifact,
+  graph: ArtifactGraph
+): PlaneArtifact | WallArtifact | CapArtifact | Error {
+  const sweep = getArtifactOfTypes(
+    { key: cap.sweepId, types: ['sweep'] },
+    graph
+  )
+  if (err(sweep)) return sweep
+  const path = getArtifactOfTypes({ key: sweep.pathId, types: ['path'] }, graph)
+  if (err(path)) return path
+  return getPlaneFromPath(path, graph)
+}
+function getPlaneFromWall(
+  wall: WallArtifact,
+  graph: ArtifactGraph
+): PlaneArtifact | WallArtifact | CapArtifact | Error {
+  const sweep = getArtifactOfTypes(
+    { key: wall.sweepId, types: ['sweep'] },
+    graph
+  )
+  if (err(sweep)) return sweep
+  const path = getArtifactOfTypes({ key: sweep.pathId, types: ['path'] }, graph)
+  if (err(path)) return path
+  return getPlaneFromPath(path, graph)
+}
+function getPlaneFromSweepEdge(edge: SweepEdgeArtifact, graph: ArtifactGraph) {
+  const sweep = getArtifactOfTypes(
+    { key: edge.sweepId, types: ['sweep'] },
+    graph
+  )
+  if (err(sweep)) return sweep
+  const path = getArtifactOfTypes({ key: sweep.pathId, types: ['path'] }, graph)
+  if (err(path)) return path
+  return getPlaneFromPath(path, graph)
 }
 
-export function isSweep(artifact: Artifact): artifact is SweepArtifact {
-  return (artifact as SweepArtifact).pathId !== undefined
+export function getPlaneFromArtifact(
+  artifact: Artifact | undefined,
+  graph: ArtifactGraph
+): PlaneArtifact | WallArtifact | CapArtifact | Error {
+  if (!artifact) return new Error(`Artifact is undefined`)
+  if (artifact.type === 'plane') return artifact
+  if (artifact.type === 'path') return getPlaneFromPath(artifact, graph)
+  if (artifact.type === 'segment') return getPlaneFromSegment(artifact, graph)
+  if (artifact.type === 'solid2D') return getPlaneFromSolid2D(artifact, graph)
+  if (artifact.type === 'cap') return getPlaneFromCap(artifact, graph)
+  if (artifact.type === 'wall') return getPlaneFromWall(artifact, graph)
+  if (artifact.type === 'sweepEdge')
+    return getPlaneFromSweepEdge(artifact, graph)
+  return new Error(`Artifact type ${artifact.type} does not have a plane`)
+}
+
+const isExprSafe = (index: number): boolean => {
+  const expr = kclManager.ast.body?.[index]
+  if (!expr) {
+    return false
+  }
+  if (expr.type === 'ImportStatement' || expr.type === 'ReturnStatement') {
+    return false
+  }
+  if (expr.type === 'VariableDeclaration') {
+    const init = expr.declaration?.init
+    if (!init) return false
+    if (init.type === 'CallExpression') {
+      return false
+    }
+    if (init.type === 'BinaryExpression' && isNodeSafe(init)) {
+      return true
+    }
+    if (init.type === 'Literal' || init.type === 'MemberExpression') {
+      return true
+    }
+  }
+  return false
+}
+
+const onlyConsecutivePaths = (
+  orderedNodePaths: PathToNode[],
+  originalPath: PathToNode
+): PathToNode[] => {
+  const originalIndex = Number(
+    orderedNodePaths.find(
+      (path) => path[1][0] === originalPath[1][0]
+    )?.[1]?.[0] || 0
+  )
+
+  const minIndex = Number(orderedNodePaths[0][1][0])
+  const maxIndex = Number(orderedNodePaths[orderedNodePaths.length - 1][1][0])
+  const pathIndexMap: any = {}
+  orderedNodePaths.forEach((path) => {
+    const bodyIndex = Number(path[1][0])
+    pathIndexMap[bodyIndex] = path
+  })
+  const safePaths: PathToNode[] = []
+
+  // traverse expressions in either direction from the profile selected
+  // when the user entered sketch mode
+  for (let i = originalIndex; i <= maxIndex; i++) {
+    if (pathIndexMap[i]) {
+      safePaths.push(pathIndexMap[i])
+    } else if (!isExprSafe(i)) {
+      break
+    }
+  }
+  for (let i = originalIndex - 1; i >= minIndex; i--) {
+    if (pathIndexMap[i]) {
+      safePaths.unshift(pathIndexMap[i])
+    } else if (!isExprSafe(i)) {
+      break
+    }
+  }
+  return safePaths
+}
+
+export function getPathsFromPlaneArtifact(planeArtifact: PlaneArtifact) {
+  const nodePaths: PathToNode[] = []
+  for (const pathId of planeArtifact.pathIds) {
+    const path = engineCommandManager.artifactGraph.get(pathId)
+    if (!path) continue
+    if ('codeRef' in path && path.codeRef) {
+      // TODO should figure out why upstream the path is bad
+      const isNodePathBad = path.codeRef.pathToNode.length < 2
+      nodePaths.push(
+        isNodePathBad
+          ? getNodePathFromSourceRange(kclManager.ast, path.codeRef.range)
+          : path.codeRef.pathToNode
+      )
+    }
+  }
+  return onlyConsecutivePaths(nodePaths, nodePaths[0])
+}
+
+export function getPathsFromArtifact({
+  sketchPathToNode,
+  artifact,
+}: {
+  sketchPathToNode: PathToNode
+  artifact?: Artifact
+}): PathToNode[] | Error {
+  const plane = getPlaneFromArtifact(
+    artifact,
+    engineCommandManager.artifactGraph
+  )
+  if (err(plane)) return plane
+  const paths = getArtifactsOfTypes(
+    { keys: plane.pathIds, types: ['path'] },
+    engineCommandManager.artifactGraph
+  )
+  let nodePaths = [...paths.values()]
+    .map((path) => path.codeRef.pathToNode)
+    .sort((a, b) => Number(a[1][0]) - Number(b[1][0]))
+  return onlyConsecutivePaths(nodePaths, sketchPathToNode)
+}
+
+function isNodeSafe(node: Expr): boolean {
+  if (node.type === 'Literal' || node.type === 'MemberExpression') {
+    return true
+  }
+  if (node.type === 'BinaryExpression') {
+    return isNodeSafe(node.left) && isNodeSafe(node.right)
+  }
+  return false
+}
+
+/** {@deprecated} this information should come from the ArtifactGraph not digging around in the AST */
+function getWallOrCapPlaneCodeRef(
+  ast: Node<Program>,
+  pathToNode: PathToNode
+): CodeRef | Error {
+  const varDec = getNodeFromPath<VariableDeclaration>(
+    ast,
+    pathToNode,
+    'VariableDeclaration'
+  )
+  if (err(varDec)) return varDec
+  if (varDec.node.type !== 'VariableDeclaration')
+    return new Error('Expected VariableDeclaration')
+  const init = varDec.node.declaration.init
+  let varName = ''
+  if (
+    init.type === 'CallExpression' &&
+    init.callee.type === 'Identifier' &&
+    (init.callee.name === 'circle' || init.callee.name === 'startProfileAt')
+  ) {
+    const secondArg = init.arguments[1]
+    if (secondArg.type === 'Identifier') {
+      varName = secondArg.name
+    }
+  } else if (init.type === 'PipeExpression') {
+    const firstExpr = init.body[0]
+    if (
+      firstExpr.type === 'CallExpression' &&
+      firstExpr.callee.type === 'Identifier' &&
+      firstExpr.callee.name === 'startProfileAt'
+    ) {
+      const secondArg = firstExpr.arguments[1]
+      if (secondArg.type === 'Identifier') {
+        varName = secondArg.name
+      }
+    }
+  }
+  if (varName === '') return new Error('Could not find variable name')
+
+  let currentVariableName = ''
+  const planeCodeRef: Array<{
+    path: PathToNode
+    sketchName: string
+    range: SourceRange
+  }> = []
+  traverse(ast, {
+    leave: (node) => {
+      if (node.type === 'VariableDeclaration') {
+        currentVariableName = ''
+      }
+    },
+    enter: (node, path) => {
+      if (node.type === 'VariableDeclaration') {
+        currentVariableName = node.declaration.id.name
+      }
+      if (
+        // match `${varName} = startSketchOn(...)`
+        node.type === 'CallExpression' &&
+        node.callee.name === 'startSketchOn' &&
+        node.arguments[0].type === 'Identifier' &&
+        currentVariableName === varName
+      ) {
+        planeCodeRef.push({
+          path,
+          sketchName: currentVariableName,
+          range: [node.start, node.end, true],
+        })
+      }
+    },
+  })
+  if (!planeCodeRef.length)
+    return new Error('No paths found depending on extrude')
+
+  return {
+    pathToNode: planeCodeRef[0].path,
+    range: planeCodeRef[0].range,
+  }
 }

src/lang/std/engineConnection.ts

@@ -1,4 +1,11 @@
-import { defaultSourceRange, SourceRange } from 'lang/wasm'
+import {
+  defaultRustSourceRange,
+  defaultSourceRange,
+  Program,
+  RustSourceRange,
+  SourceRange,
+  sourceRangeFromRust,
+} from 'lang/wasm'
 import { VITE_KC_API_WS_MODELING_URL, VITE_KC_DEV_TOKEN } from 'env'
 import { Models } from '@kittycad/lib'
 import { exportSave } from 'lib/exportSave'
@@ -30,6 +37,7 @@ import { KclManager } from 'lang/KclSingleton'
 import { reportRejection } from 'lib/trap'
 import { markOnce } from 'lib/performance'
 import { MachineManager } from 'components/MachineManagerProvider'
+import { Node } from 'wasm-lib/kcl/bindings/Node'
 
 // TODO(paultag): This ought to be tweakable.
 const pingIntervalMs = 5_000
@@ -1302,8 +1310,8 @@ export enum EngineCommandManagerEvents {
 
 interface PendingMessage {
   command: EngineCommand
-  range: SourceRange
-  idToRangeMap: { [key: string]: SourceRange }
+  range: RustSourceRange
+  idToRangeMap: { [key: string]: RustSourceRange }
   resolve: (data: [Models['WebSocketResponse_type']]) => void
   reject: (reason: string) => void
   promise: Promise<[Models['WebSocketResponse_type']]>
@@ -1993,7 +2001,7 @@ export class EngineCommandManager extends EventTarget {
       {
         command,
         idToRangeMap: {},
-        range: defaultSourceRange(),
+        range: defaultRustSourceRange(),
       },
       true // isSceneCommand
     )
@@ -2024,9 +2032,9 @@ export class EngineCommandManager extends EventTarget {
       return Promise.reject(new Error('rangeStr is undefined'))
     if (commandStr === undefined)
       return Promise.reject(new Error('commandStr is undefined'))
-    const range: SourceRange = JSON.parse(rangeStr)
+    const range: RustSourceRange = JSON.parse(rangeStr)
     const command: EngineCommand = JSON.parse(commandStr)
-    const idToRangeMap: { [key: string]: SourceRange } =
+    const idToRangeMap: { [key: string]: RustSourceRange } =
       JSON.parse(idToRangeStr)
 
     // Current executeAst is stale, going to interrupt, a new executeAst will trigger
@@ -2069,10 +2077,14 @@ export class EngineCommandManager extends EventTarget {
     if (message.command.type === 'modeling_cmd_req') {
       this.orderedCommands.push({
         command: message.command,
-        range: message.range,
+        range: sourceRangeFromRust(message.range),
       })
     } else if (message.command.type === 'modeling_cmd_batch_req') {
       message.command.requests.forEach((req) => {
+        const cmdId = req.cmd_id || ''
+        const range = cmdId
+          ? sourceRangeFromRust(message.idToRangeMap[cmdId])
+          : defaultSourceRange()
         const cmd: EngineCommand = {
           type: 'modeling_cmd_req',
           cmd_id: req.cmd_id,
@@ -2080,7 +2092,7 @@ export class EngineCommandManager extends EventTarget {
         }
         this.orderedCommands.push({
           command: cmd,
-          range: message.idToRangeMap[req.cmd_id || ''],
+          range,
         })
       })
     }
@@ -2099,30 +2111,23 @@ export class EngineCommandManager extends EventTarget {
    * When an execution takes place we want to wait until we've got replies for all of the commands
    * When this is done when we build the artifact map synchronously.
    */
-  async waitForAllCommands(useFakeExecutor = false) {
-    await Promise.all(Object.values(this.pendingCommands).map((a) => a.promise))
-    setTimeout(() => {
-      // the ast is wrong without this one tick timeout.
-      // an example is `Solids should be select and deletable` e2e test will fail
-      // because the out of date ast messes with selections
-      // TODO: race condition
-      if (!this?.kclManager) return
+  waitForAllCommands() {
+    return Promise.all(
+      Object.values(this.pendingCommands).map((a) => a.promise)
+    )
+  }
+  updateArtifactGraph(ast: Node<Program>) {
     this.artifactGraph = createArtifactGraph({
       orderedCommands: this.orderedCommands,
       responseMap: this.responseMap,
-        ast: this.kclManager.ast,
+      ast,
     })
-      if (useFakeExecutor) {
-        // mock executions don't produce an artifactGraph, so this will always be empty
-        // skipping the below logic to wait for the next real execution
-        return
-      }
+    // TODO check if these still need to be deferred once e2e tests are working again.
     if (this.artifactGraph.size) {
       this.deferredArtifactEmptied(null)
     } else {
       this.deferredArtifactPopulated(null)
     }
-    })
   }
 
   /**
@@ -2209,7 +2214,11 @@ export class EngineCommandManager extends EventTarget {
     commandTypeToTarget: string
   ): string | undefined {
     for (const [artifactId, artifact] of this.artifactGraph) {
-      if ('codeRef' in artifact && isOverlap(range, artifact.codeRef.range)) {
+      if (
+        'codeRef' in artifact &&
+        artifact.codeRef &&
+        isOverlap(range, artifact.codeRef.range)
+      ) {
         if (commandTypeToTarget === artifact.type) return artifactId
       }
     }

src/lang/std/sketch.ts

@@ -297,14 +297,20 @@ export const lineTo: SketchLineHelper = {
   add: ({ node, pathToNode, segmentInput, replaceExistingCallback }) => {
     if (segmentInput.type !== 'straight-segment') return STRAIGHT_SEGMENT_ERR
     const to = segmentInput.to
-    const _node = { ...node }
+    const _node = structuredClone(node)
     const nodeMeta = getNodeFromPath<PipeExpression>(
       _node,
       pathToNode,
       'PipeExpression'
     )
     if (err(nodeMeta)) return nodeMeta
-    const { node: pipe } = nodeMeta
+    const varDec = getNodeFromPath<VariableDeclaration>(
+      _node,
+      pathToNode,
+      'VariableDeclaration'
+    )
+    if (err(varDec)) return varDec
+    const dec = varDec.node.declaration
 
     const newVals: [Expr, Expr] = [
       createLiteral(roundOff(to[0], 2)),
@@ -333,14 +339,20 @@ export const lineTo: SketchLineHelper = {
       ])
       if (err(result)) return result
       const { callExp, valueUsedInTransform } = result
-      pipe.body[callIndex] = callExp
+      if (dec.init.type === 'PipeExpression') {
+        dec.init.body[callIndex] = callExp
+      } else {
+        dec.init = callExp
+      }
       return {
         modifiedAst: _node,
         pathToNode,
         valueUsedInTransform: valueUsedInTransform,
       }
+    } else if (dec.init.type === 'PipeExpression') {
+      dec.init.body = [...dec.init.body, newLine]
     } else {
-      pipe.body = [...pipe.body, newLine]
+      dec.init = createPipeExpression([dec.init, newLine])
     }
     return {
       modifiedAst: _node,
@@ -663,11 +675,11 @@ export const xLine: SketchLineHelper = {
   add: ({ node, pathToNode, segmentInput, replaceExistingCallback }) => {
     if (segmentInput.type !== 'straight-segment') return STRAIGHT_SEGMENT_ERR
     const { from, to } = segmentInput
-    const _node = { ...node }
+    const _node = structuredClone(node)
     const getNode = getNodeFromPathCurry(_node, pathToNode)
-    const _node1 = getNode<PipeExpression>('PipeExpression')
-    if (err(_node1)) return _node1
-    const { node: pipe } = _node1
+    const varDec = getNode<VariableDeclaration>('VariableDeclaration')
+    if (err(varDec)) return varDec
+    const dec = varDec.node.declaration
 
     const newVal = createLiteral(roundOff(to[0] - from[0], 2))
 
@@ -682,7 +694,11 @@ export const xLine: SketchLineHelper = {
       ])
       if (err(result)) return result
       const { callExp, valueUsedInTransform } = result
-      pipe.body[callIndex] = callExp
+      if (dec.init.type === 'PipeExpression') {
+        dec.init.body[callIndex] = callExp
+      } else {
+        dec.init = callExp
+      }
       return {
         modifiedAst: _node,
         pathToNode,
@@ -694,7 +710,11 @@ export const xLine: SketchLineHelper = {
       newVal,
       createPipeSubstitution(),
     ])
-    pipe.body = [...pipe.body, newLine]
+    if (dec.init.type === 'PipeExpression') {
+      dec.init.body = [...dec.init.body, newLine]
+    } else {
+      dec.init = createPipeExpression([dec.init, newLine])
+    }
     return { modifiedAst: _node, pathToNode }
   },
   updateArgs: ({ node, pathToNode, input }) => {
@@ -731,11 +751,11 @@ export const yLine: SketchLineHelper = {
   add: ({ node, pathToNode, segmentInput, replaceExistingCallback }) => {
     if (segmentInput.type !== 'straight-segment') return STRAIGHT_SEGMENT_ERR
     const { from, to } = segmentInput
-    const _node = { ...node }
+    const _node = structuredClone(node)
     const getNode = getNodeFromPathCurry(_node, pathToNode)
-    const _node1 = getNode<PipeExpression>('PipeExpression')
-    if (err(_node1)) return _node1
-    const { node: pipe } = _node1
+    const varDec = getNode<VariableDeclaration>('VariableDeclaration')
+    if (err(varDec)) return varDec
+    const dec = varDec.node.declaration
     const newVal = createLiteral(roundOff(to[1] - from[1], 2))
     if (replaceExistingCallback) {
       const { index: callIndex } = splitPathAtPipeExpression(pathToNode)
@@ -748,7 +768,11 @@ export const yLine: SketchLineHelper = {
       ])
       if (err(result)) return result
       const { callExp, valueUsedInTransform } = result
-      pipe.body[callIndex] = callExp
+      if (dec.init.type === 'PipeExpression') {
+        dec.init.body[callIndex] = callExp
+      } else {
+        dec.init = callExp
+      }
       return {
         modifiedAst: _node,
         pathToNode,
@@ -760,7 +784,11 @@ export const yLine: SketchLineHelper = {
       newVal,
       createPipeSubstitution(),
     ])
-    pipe.body = [...pipe.body, newLine]
+    if (dec.init.type === 'PipeExpression') {
+      dec.init.body = [...dec.init.body, newLine]
+    } else {
+      dec.init = createPipeExpression([dec.init, newLine])
+    }
     return { modifiedAst: _node, pathToNode }
   },
   updateArgs: ({ node, pathToNode, input }) => {
@@ -2145,8 +2173,6 @@ function addTagToChamfer(
   if (err(variableDec)) return variableDec
   const isPipeExpression = pipeExpr.node.type === 'PipeExpression'
 
-  console.log('pipeExpr', pipeExpr, variableDec)
-  // const callExpr = isPipeExpression ? pipeExpr.node.body[pipeIndex] : variableDec.node.init
   const callExpr = isPipeExpression
     ? pipeExpr.node.body[pipeIndex]
     : variableDec.node.init
@@ -2227,7 +2253,6 @@ function addTagToChamfer(
   if (isPipeExpression) {
     pipeExpr.node.body.splice(pipeIndex, 0, newExpressionToInsert)
   } else {
-    console.log('yo', createPipeExpression([newExpressionToInsert, callExpr]))
     callExpr.arguments[1] = createPipeSubstitution()
     variableDec.node.init = createPipeExpression([
       newExpressionToInsert,

src/lang/util.ts

@@ -9,20 +9,47 @@ import {
 import { ArtifactGraph, filterArtifacts } from 'lang/std/artifactGraph'
 import { isOverlap } from 'lib/utils'
 
-export function updatePathToNodeFromMap(
-  oldPath: PathToNode,
-  pathToNodeMap: { [key: number]: PathToNode }
+/**
+ * Updates pathToNode body indices to account for the insertion of an expression
+ * PathToNode expression is after the insertion index, that the body index is incremented
+ * Negative insertion index means no insertion
+ */
+export function updatePathToNodePostExprInjection(
+  pathToNode: PathToNode,
+  exprInsertIndex: number
 ): PathToNode {
-  const updatedPathToNode = structuredClone(oldPath)
-  let max = 0
-  Object.values(pathToNodeMap).forEach((path) => {
-    const index = Number(path[1][0])
-    if (index > max) {
-      max = index
+  if (exprInsertIndex < 0) return pathToNode
+  const bodyIndex = Number(pathToNode[1][0])
+  if (bodyIndex < exprInsertIndex) return pathToNode
+  const clone = structuredClone(pathToNode)
+  clone[1][0] = bodyIndex + 1
+  return clone
+}
+
+export function updateSketchDetailsNodePaths({
+  sketchEntryNodePath,
+  sketchNodePaths,
+  planeNodePath,
+  exprInsertIndex,
+}: {
+  sketchEntryNodePath: PathToNode
+  sketchNodePaths: Array<PathToNode>
+  planeNodePath: PathToNode
+  exprInsertIndex: number
+}) {
+  return {
+    updatedSketchEntryNodePath: updatePathToNodePostExprInjection(
+      sketchEntryNodePath,
+      exprInsertIndex
+    ),
+    updatedSketchNodePaths: sketchNodePaths.map((path) =>
+      updatePathToNodePostExprInjection(path, exprInsertIndex)
+    ),
+    updatedPlaneNodePath: updatePathToNodePostExprInjection(
+      planeNodePath,
+      exprInsertIndex
+    ),
   }
-  })
-  updatedPathToNode[1][0] = max
-  return updatedPathToNode
 }
 
 export function isCursorInSketchCommandRange(
@@ -31,7 +58,7 @@ export function isCursorInSketchCommandRange(
 ): string | false {
   const overlappingEntries = filterArtifacts(
     {
-      types: ['segment', 'path'],
+      types: ['segment', 'path', 'plane'],
       predicate: (artifact) => {
         return selectionRanges.graphSelections.some(
           (selection) =>

src/lang/wasm.ts

@@ -65,6 +65,7 @@ export type { BinaryPart } from '../wasm-lib/kcl/bindings/BinaryPart'
 export type { Literal } from '../wasm-lib/kcl/bindings/Literal'
 export type { LiteralValue } from '../wasm-lib/kcl/bindings/LiteralValue'
 export type { ArrayExpression } from '../wasm-lib/kcl/bindings/ArrayExpression'
+export type { SourceRange as RustSourceRange } from 'wasm-lib/kcl/bindings/SourceRange'
 
 export type SyntaxType =
   | 'Program'
@@ -117,6 +118,13 @@ export function defaultSourceRange(): SourceRange {
   return [0, 0, true]
 }
 
+/**
+ * Create a default RustSourceRange for testing or as a placeholder.
+ */
+export function defaultRustSourceRange(): RustSourceRange {
+  return [0, 0, 0]
+}
+
 export const wasmUrl = () => {
   // For when we're in electron (file based) or web server (network based)
   // For some reason relative paths don't work as expected. Otherwise we would
@@ -491,26 +499,6 @@ export const executor = async (
   if (programMemoryOverride !== null && err(programMemoryOverride))
     return Promise.reject(programMemoryOverride)
 
-  // eslint-disable-next-line @typescript-eslint/no-floating-promises
-  engineCommandManager.startNewSession()
-  const _programMemory = await _executor(
-    node,
-    engineCommandManager,
-    programMemoryOverride
-  )
-  await engineCommandManager.waitForAllCommands()
-
-  return _programMemory
-}
-
-export const _executor = async (
-  node: Node<Program>,
-  engineCommandManager: EngineCommandManager,
-  programMemoryOverride: ProgramMemory | Error | null = null
-): Promise<ExecState> => {
-  if (programMemoryOverride !== null && err(programMemoryOverride))
-    return Promise.reject(programMemoryOverride)
-
   try {
     let jsAppSettings = default_app_settings()
     if (!TEST) {

src/lib/cameraControls.ts

@@ -10,7 +10,7 @@ const noModifiersPressed = (e: MouseEvent) =>
   !e.ctrlKey && !e.shiftKey && !e.altKey && !e.metaKey
 
 export type CameraSystem =
-  | 'KittyCAD'
+  | 'Zoo'
   | 'OnShape'
   | 'Trackpad Friendly'
   | 'Solidworks'
@@ -19,7 +19,7 @@ export type CameraSystem =
   | 'AutoCAD'
 
 export const cameraSystems: CameraSystem[] = [
-  'KittyCAD',
+  'Zoo',
   'OnShape',
   'Trackpad Friendly',
   'Solidworks',
@@ -34,9 +34,8 @@ export function mouseControlsToCameraSystem(
   switch (mouseControl) {
     // TODO: understand why the values come back without underscores and fix the root cause
     // @ts-ignore: TS2678
-    case 'kittycad':
-    case 'kitty_cad':
-      return 'KittyCAD'
+    case 'zoo':
+      return 'Zoo'
     // TODO: understand why the values come back without underscores and fix the root cause
     // @ts-ignore: TS2678
     case 'onshape':
@@ -86,7 +85,7 @@ export const btnName = (e: MouseEvent) => ({
 })
 
 export const cameraMouseDragGuards: Record<CameraSystem, MouseGuard> = {
-  KittyCAD: {
+  Zoo: {
     pan: {
       description: 'Shift + Right click drag or middle click drag',
       callback: (e) =>

src/lib/commandBarConfigs/validators.ts

@@ -3,7 +3,6 @@ import { engineCommandManager } from 'lib/singletons'
 import { uuidv4 } from 'lib/utils'
 import { CommandBarContext } from 'machines/commandBarMachine'
 import { Selections } from 'lib/selections'
-import { isSolid2D, isSegment, isSweep } from 'lang/std/artifactGraph'
 
 export const disableDryRunWithRetry = async (numberOfRetries = 3) => {
   for (let tries = 0; tries < numberOfRetries; tries++) {
@@ -64,7 +63,7 @@ export const revolveAxisValidator = async ({
     return 'Unable to revolve, sketch not found'
   }
 
-  if (!(isSolid2D(artifact) || isSegment(artifact) || isSweep(artifact))) {
+  if (!('pathId' in artifact)) {
     return 'Unable to revolve, sketch has no path'
   }
 

src/lib/constants.ts

@@ -118,3 +118,21 @@ export const KCL_AXIS_Y = 'Y'
 export const KCL_AXIS_NEG_X = '-X'
 export const KCL_AXIS_NEG_Y = '-Y'
 export const KCL_DEFAULT_AXIS = 'X'
+
+export enum AxisNames {
+  X = 'x',
+  Y = 'y',
+  Z = 'z',
+  NEG_X = '-x',
+  NEG_Y = '-y',
+  NEG_Z = '-z',
+}
+/** Semantic names of views from AxisNames */
+export const VIEW_NAMES_SEMANTIC = {
+  [AxisNames.X]: 'Right',
+  [AxisNames.Y]: 'Back',
+  [AxisNames.Z]: 'Top',
+  [AxisNames.NEG_X]: 'Left',
+  [AxisNames.NEG_Y]: 'Front',
+  [AxisNames.NEG_Z]: 'Bottom',
+} as const

src/lib/rectangleTool.ts

@@ -29,7 +29,7 @@ import {
  */
 export const getRectangleCallExpressions = (
   rectangleOrigin: [number, number],
-  tags: [string, string, string]
+  tag: string
 ) => [
   createCallExpressionStdLib('angledLine', [
     createArrayExpression([
@@ -37,30 +37,28 @@ export const getRectangleCallExpressions = (
       createLiteral(0), // This will be the width of the rectangle
     ]),
     createPipeSubstitution(),
-    createTagDeclarator(tags[0]),
+    createTagDeclarator(tag),
   ]),
   createCallExpressionStdLib('angledLine', [
     createArrayExpression([
       createBinaryExpression([
-        createCallExpressionStdLib('segAng', [createIdentifier(tags[0])]),
+        createCallExpressionStdLib('segAng', [createIdentifier(tag)]),
         '+',
         createLiteral(90),
       ]), // 90 offset from the previous line
       createLiteral(0), // This will be the height of the rectangle
     ]),
     createPipeSubstitution(),
-    createTagDeclarator(tags[1]),
   ]),
   createCallExpressionStdLib('angledLine', [
     createArrayExpression([
-      createCallExpressionStdLib('segAng', [createIdentifier(tags[0])]), // same angle as the first line
+      createCallExpressionStdLib('segAng', [createIdentifier(tag)]), // same angle as the first line
       createUnaryExpression(
-        createCallExpressionStdLib('segLen', [createIdentifier(tags[0])]),
+        createCallExpressionStdLib('segLen', [createIdentifier(tag)]),
         '-'
       ), // negative height
     ]),
     createPipeSubstitution(),
-    createTagDeclarator(tags[2]),
   ]),
   createCallExpressionStdLib('lineTo', [
     createArrayExpression([
@@ -85,12 +83,12 @@ export function updateRectangleSketch(
   y: number,
   tag: string
 ) {
-  ;((pipeExpression.body[2] as CallExpression)
+  ;((pipeExpression.body[1] as CallExpression)
     .arguments[0] as ArrayExpression) = createArrayExpression([
     createLiteral(x >= 0 ? 0 : 180),
     createLiteral(Math.abs(x)),
   ])
-  ;((pipeExpression.body[3] as CallExpression)
+  ;((pipeExpression.body[2] as CallExpression)
     .arguments[0] as ArrayExpression) = createArrayExpression([
     createBinaryExpression([
       createCallExpressionStdLib('segAng', [createIdentifier(tag)]),
@@ -120,7 +118,7 @@ export function updateCenterRectangleSketch(
   let startY = originY - Math.abs(deltaY)
 
   // pipeExpression.body[1] is startProfileAt
-  let callExpression = pipeExpression.body[1]
+  let callExpression = pipeExpression.body[0]
   if (isCallExpression(callExpression)) {
     const arrayExpression = callExpression.arguments[0]
     if (isArrayExpression(arrayExpression)) {
@@ -134,7 +132,7 @@ export function updateCenterRectangleSketch(
   const twoX = deltaX * 2
   const twoY = deltaY * 2
 
-  callExpression = pipeExpression.body[2]
+  callExpression = pipeExpression.body[1]
   if (isCallExpression(callExpression)) {
     const arrayExpression = callExpression.arguments[0]
     if (isArrayExpression(arrayExpression)) {
@@ -148,7 +146,7 @@ export function updateCenterRectangleSketch(
     }
   }
 
-  callExpression = pipeExpression.body[3]
+  callExpression = pipeExpression.body[2]
   if (isCallExpression(callExpression)) {
     const arrayExpression = callExpression.arguments[0]
     if (isArrayExpression(arrayExpression)) {

src/lib/routeLoaders.ts

@@ -15,6 +15,7 @@ import { fileSystemManager } from 'lang/std/fileSystemManager'
 import { getProjectInfo } from './desktop'
 import { createSettings } from './settings/initialSettings'
 import { normalizeLineEndings } from 'lib/codeEditor'
+import { OnboardingStatus } from 'wasm-lib/kcl/bindings/OnboardingStatus'
 
 // The root loader simply resolves the settings and any errors that
 // occurred during the settings load
@@ -53,14 +54,15 @@ export const telemetryLoader: LoaderFunction = async ({
 // Redirect users to the appropriate onboarding page if they haven't completed it
 export const onboardingRedirectLoader: ActionFunction = async (args) => {
   const { settings } = await loadAndValidateSettings()
-  const onboardingStatus = settings.app.onboardingStatus.current || ''
+  const onboardingStatus: OnboardingStatus =
+    settings.app.onboardingStatus.current || ''
   const notEnRouteToOnboarding = !args.request.url.includes(
     PATHS.ONBOARDING.INDEX
   )
-  // '' is the initial state, 'done' and 'dismissed' are the final states
+  // '' is the initial state, 'completed' and 'dismissed' are the final states
   const hasValidOnboardingStatus =
     onboardingStatus.length === 0 ||
-    !(onboardingStatus === 'done' || onboardingStatus === 'dismissed')
+    !(onboardingStatus === 'completed' || onboardingStatus === 'dismissed')
   const shouldRedirectToOnboarding =
     notEnRouteToOnboarding && hasValidOnboardingStatus
 

src/lib/selections.ts

@@ -280,18 +280,19 @@ export function getEventForSegmentSelection(
   }
   if (!id || !group) return null
   const artifact = engineCommandManager.artifactGraph.get(id)
-  const codeRefs = getCodeRefsByArtifactId(
-    id,
-    engineCommandManager.artifactGraph
-  )
-  if (!artifact || !codeRefs) return null
+  if (!artifact) return null
+  const node = getNodeFromPath<Expr>(kclManager.ast, group.userData.pathToNode)
+  if (err(node)) return null
   return {
     type: 'Set selection',
     data: {
       selectionType: 'singleCodeCursor',
       selection: {
         artifact,
-        codeRef: codeRefs[0],
+        codeRef: {
+          pathToNode: group?.userData?.pathToNode,
+          range: [node.node.start, node.node.end, true],
+        },
       },
     },
   }
@@ -675,8 +676,7 @@ export function getSelectionTypeDisplayText(
   const selectionsByType = getSelectionCountByType(selection)
   if (selectionsByType === 'none') return null
 
-  return selectionsByType
-    .entries()
+  return [...selectionsByType.entries()]
     .map(
       // Hack for showing "face" instead of "extrude-wall" in command bar text
       ([type, count]) =>
@@ -685,7 +685,6 @@ export function getSelectionTypeDisplayText(
           .replace('solid2D', 'face')
           .replace('segment', 'face')}${count > 1 ? 's' : ''}`
     )
-    .toArray()
     .join(', ')
 }
 
@@ -695,7 +694,7 @@ export function canSubmitSelectionArg(
 ) {
   return (
     selectionsByType !== 'none' &&
-    selectionsByType.entries().every(([type, count]) => {
+    [...selectionsByType.entries()].every(([type, count]) => {
       const foundIndex = argument.selectionTypes.findIndex((s) => s === type)
       return (
         foundIndex !== -1 &&
@@ -718,7 +717,7 @@ export function codeToIdSelections(
       // TODO #868: loops over all artifacts will become inefficient at a large scale
       const overlappingEntries = Array.from(engineCommandManager.artifactGraph)
         .map(([id, artifact]) => {
-          if (!('codeRef' in artifact)) return null
+          if (!('codeRef' in artifact && artifact.codeRef)) return null
           return isOverlap(artifact.codeRef.range, selection.range)
             ? {
                 artifact,
@@ -961,7 +960,6 @@ export function updateSelections(
             JSON.stringify(pathToNode)
           ) {
             artifact = a
-            console.log('found artifact', a)
             break
           }
         }

src/lib/settings/initialSettings.tsx

@@ -19,6 +19,7 @@ import Tooltip from 'components/Tooltip'
 import { toSync } from 'lib/utils'
 import { reportRejection } from 'lib/trap'
 import { CameraProjectionType } from 'wasm-lib/kcl/bindings/CameraProjectionType'
+import { OnboardingStatus } from 'wasm-lib/kcl/bindings/OnboardingStatus'
 
 /**
  * A setting that can be set at the user or project level
@@ -189,8 +190,10 @@ export function createSettings() {
           inputType: 'boolean',
         },
       }),
-      onboardingStatus: new Setting<string>({
+      onboardingStatus: new Setting<OnboardingStatus>({
         defaultValue: '',
+        // TODO: this could be better but we don't have a TS side real enum
+        // for this yet
         validate: (v) => typeof v === 'string',
         hideOnPlatform: 'both',
       }),
@@ -283,7 +286,7 @@ export function createSettings() {
        * The controls for how to navigate the 3D view
        */
       mouseControls: new Setting<CameraSystem>({
-        defaultValue: 'KittyCAD',
+        defaultValue: 'Zoo',
         description: 'The controls for how to navigate the 3D view',
         validate: (v) => cameraSystems.includes(v as CameraSystem),
         hideOnLevel: 'project',

src/lib/testHelpers.ts

@@ -1,20 +1,16 @@
 import {
   Program,
   ProgramMemory,
-  _executor,
+  executor,
   SourceRange,
   ExecState,
 } from '../lang/wasm'
-import {
-  EngineCommandManager,
-  EngineCommandManagerEvents,
-} from 'lang/std/engineConnection'
+import { EngineCommandManager } from 'lang/std/engineConnection'
 import { EngineCommand } from 'lang/std/artifactGraph'
 import { Models } from '@kittycad/lib'
 import { v4 as uuidv4 } from 'uuid'
 import { DefaultPlanes } from 'wasm-lib/kcl/bindings/DefaultPlanes'
-import { err, reportRejection } from 'lib/trap'
-import { toSync } from './utils'
+import { err } from 'lib/trap'
 import { Node } from 'wasm-lib/kcl/bindings/Node'
 
 type WebSocketResponse = Models['WebSocketResponse_type']
@@ -94,36 +90,7 @@ export async function enginelessExecutor(
   }) as any as EngineCommandManager
   // eslint-disable-next-line @typescript-eslint/no-floating-promises
   mockEngineCommandManager.startNewSession()
-  const execState = await _executor(ast, mockEngineCommandManager, pmo)
+  const execState = await executor(ast, mockEngineCommandManager, pmo)
   await mockEngineCommandManager.waitForAllCommands()
   return execState
 }
-
-export async function executor(
-  ast: Node<Program>,
-  pmo: ProgramMemory = ProgramMemory.empty()
-): Promise<ExecState> {
-  const engineCommandManager = new EngineCommandManager()
-  engineCommandManager.start({
-    setIsStreamReady: () => {},
-    setMediaStream: () => {},
-    width: 0,
-    height: 0,
-    makeDefaultPlanes: () => {
-      return new Promise((resolve) => resolve(defaultPlanes))
-    },
-  })
-
-  return new Promise((resolve) => {
-    engineCommandManager.addEventListener(
-      EngineCommandManagerEvents.SceneReady,
-      toSync(async () => {
-        // eslint-disable-next-line @typescript-eslint/no-floating-promises
-        engineCommandManager.startNewSession()
-        const execState = await _executor(ast, engineCommandManager, pmo)
-        await engineCommandManager.waitForAllCommands()
-        resolve(execState)
-      }, reportRejection)
-    )
-  })
-}

src/lib/toolbar.ts

@@ -2,8 +2,6 @@ import { CustomIconName } from 'components/CustomIcon'
 import { DEV } from 'env'
 import { commandBarMachine } from 'machines/commandBarMachine'
 import {
-  canRectangleOrCircleTool,
-  isClosedSketch,
   isEditingExistingSketch,
   modelingMachine,
   pipeHasCircle,
@@ -73,7 +71,7 @@ export const toolbarConfig: Record<ToolbarModeName, ToolbarMode> = {
         status: 'available',
         disabled: (state) => !state.matches('idle'),
         title: ({ sketchPathId }) =>
-          `${sketchPathId ? 'Edit' : 'Start'} Sketch`,
+          sketchPathId ? 'Edit Sketch' : 'Start Sketch',
         showTitle: true,
         hotkey: 'S',
         description: 'Start drawing a 2D sketch',
@@ -315,13 +313,6 @@ export const toolbarConfig: Record<ToolbarModeName, ToolbarMode> = {
       {
         id: 'line',
         onClick: ({ modelingState, modelingSend }) => {
-          if (modelingState.matches({ Sketch: { 'Line tool': 'No Points' } })) {
-            // Exit the sketch state if there are no points and they press ESC
-            modelingSend({
-              type: 'Cancel',
-            })
-          } else {
-            // Exit the tool if there are points and they press ESC
           modelingSend({
             type: 'change tool',
             data: {
@@ -330,7 +321,6 @@ export const toolbarConfig: Record<ToolbarModeName, ToolbarMode> = {
                 : 'none',
             },
           })
-          }
         },
         icon: 'line',
         status: 'available',
@@ -341,8 +331,7 @@ export const toolbarConfig: Record<ToolbarModeName, ToolbarMode> = {
           }) ||
           state.matches({
             Sketch: { 'Circle tool': 'Awaiting Radius' },
-          }) ||
-          isClosedSketch(state.context),
+          }),
         title: 'Line',
         hotkey: (state) =>
           state.matches({ Sketch: 'Line tool' }) ? ['Esc', 'L'] : 'L',
@@ -422,10 +411,7 @@ export const toolbarConfig: Record<ToolbarModeName, ToolbarMode> = {
           icon: 'circle',
           status: 'available',
           title: 'Center circle',
-          disabled: (state) =>
-            state.matches('Sketch no face') ||
-            (!canRectangleOrCircleTool(state.context) &&
-              !state.matches({ Sketch: 'Circle tool' })),
+          disabled: (state) => state.matches('Sketch no face'),
           isActive: (state) => state.matches({ Sketch: 'Circle tool' }),
           hotkey: (state) =>
             state.matches({ Sketch: 'Circle tool' }) ? ['Esc', 'C'] : 'C',
@@ -464,10 +450,7 @@ export const toolbarConfig: Record<ToolbarModeName, ToolbarMode> = {
             }),
           icon: 'rectangle',
           status: 'available',
-          disabled: (state) =>
-            state.matches('Sketch no face') ||
-            (!canRectangleOrCircleTool(state.context) &&
-              !state.matches({ Sketch: 'Rectangle tool' })),
+          disabled: (state) => state.matches('Sketch no face'),
           title: 'Corner rectangle',
           hotkey: (state) =>
             state.matches({ Sketch: 'Rectangle tool' }) ? ['Esc', 'R'] : 'R',
@@ -490,10 +473,7 @@ export const toolbarConfig: Record<ToolbarModeName, ToolbarMode> = {
             }),
           icon: 'arc',
           status: 'available',
-          disabled: (state) =>
-            state.matches('Sketch no face') ||
-            (!canRectangleOrCircleTool(state.context) &&
-              !state.matches({ Sketch: 'Center Rectangle tool' })),
+          disabled: (state) => state.matches('Sketch no face'),
           title: 'Center rectangle',
           hotkey: (state) =>
             state.matches({ Sketch: 'Center Rectangle tool' })

src/lib/trap.ts

@@ -97,3 +97,7 @@ export function trap<T>(
     })
   return true
 }
+
+export function reject(errOrString: Error | string): Promise<never> {
+  return Promise.reject(errOrString)
+}