hacky shit

Signed-off-by: Jess Frazelle <github@jessfraz.com>

.codespellrc

@@ -1,3 +1,3 @@
 [codespell]
-ignore-words-list: crate,everytime,inout,co-ordinate,ot,nwo,atleast,ue,afterall,ser,fromM,FromM
+ignore-words-list: crate,everytime,inout,co-ordinate,ot,nwo,atleast,ue,afterall,ser
 skip: **/target,node_modules,build,dist,./out,**/Cargo.lock,./docs/kcl/*.md,.yarn.lock,**/yarn.lock,./openapi/*.json,./packages/codemirror-lang-kcl/test/all.test.ts,./public/kcl-samples,./rust/kcl-lib/tests/kcl_samples,tsconfig.tsbuildinfo

.github/ci-cd-scripts/start-vector-macos.sh

@@ -1,24 +0,0 @@
-#!/bin/bash
-set -euo pipefail
-
-# Install vector
-brew tap vectordotdev/brew && brew install vector
-
-# Configure vector
-mkdir -p /tmp/vector
-cp .github/workflows/vector.toml /tmp/vector.toml
-sed -i '' "s#OS_NAME#${OS_NAME}#g" /tmp/vector.toml
-sed -i '' "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
-sed -i '' "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
-sed -i '' "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
-sed -i '' "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
-sed -i '' "s#GH_ACTIONS_AXIOM_TOKEN#${GH_ACTIONS_AXIOM_TOKEN}#g" /tmp/vector.toml
-
-# Display settings
-echo
-echo 'Vector config:'
-cat /tmp/vector.toml
-echo
-
-# Start in the background
-$(brew --prefix)/opt/vector/bin/vector --config /tmp/vector.toml &

.github/ci-cd-scripts/start-vector-ubuntu.sh

@@ -1,24 +0,0 @@
-#!/bin/bash
-set -euo pipefail
-
-# Install vector
-curl --proto '=https' --tlsv1.2 -sSfL https://sh.vector.dev | bash -s -- -y
-
-# Configure vector
-mkdir -p /tmp/vector
-cp .github/workflows/vector.toml /tmp/vector.toml
-sed -i "s#OS_NAME#${OS_NAME}#g" /tmp/vector.toml
-sed -i "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
-sed -i "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
-sed -i "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
-sed -i "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
-sed -i "s#GH_ACTIONS_AXIOM_TOKEN#${GH_ACTIONS_AXIOM_TOKEN}#g" /tmp/vector.toml
-
-# Display settings
-echo
-echo 'Vector config:'
-cat /tmp/vector.toml
-echo
-
-# Start in background
-${HOME}/.vector/bin/vector --config /tmp/vector.toml &

.github/workflows/build-and-store-wasm.yml

@@ -24,7 +24,7 @@ jobs:
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
           cache: false # Configured below.
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
       - name: Rust Cache

.github/workflows/build-apps.yml

@@ -77,7 +77,7 @@ jobs:
         with:
           cache: false # Configured below.
 
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         if: ${{ steps.wasm.outputs.should-build-wasm == 'true' }}
         with:
           tool: wasm-pack
@@ -378,7 +378,7 @@ jobs:
           NOTES: ${{ needs.prepare-files.outputs.notes }}
           PUB_DATE: ${{ github.event.repository.updated_at }}
           WEBSITE_DIR: ${{ env.IS_NIGHTLY == 'true' && 'dl.zoo.dev/releases/modeling-app/nightly' || 'dl.zoo.dev/releases/modeling-app' }}
-          URL_CODED_NAME: ${{ env.IS_NIGHTLY == 'true' && 'Zoo%20Design%20Studio%20%28Nightly%29' || 'Zoo%20Design%20Studio' }}
+          URL_CODED_NAME: ${{ env.IS_NIGHTLY == 'true' && 'Zoo%20Modeling%20App%20%28Nightly%29' || 'Zoo%20Modeling%20App' }}
         run: |
           RELEASE_DIR=https://${WEBSITE_DIR}
           jq --null-input \

.github/workflows/cargo-test.yml

@@ -34,11 +34,20 @@ jobs:
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
           cache: false # Configured below.
-      - name: Start Vector
-        run: .github/ci-cd-scripts/start-vector-ubuntu.sh
-        env:
-          GH_ACTIONS_AXIOM_TOKEN: ${{ secrets.GH_ACTIONS_AXIOM_TOKEN }}
-          OS_NAME: ${{ env.OS_NAME }}
+      - name: Install vector
+        run: |
+          curl --proto '=https' --tlsv1.2 -sSfL https://sh.vector.dev > /tmp/vector.sh
+          chmod +x /tmp/vector.sh
+          /tmp/vector.sh -y -no-modify-path
+          mkdir -p /tmp/vector
+          cp .github/workflows/vector.toml /tmp/vector.toml
+          sed -i "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
+          sed -i "s#GH_ACTIONS_AXIOM_TOKEN#${{secrets.GH_ACTIONS_AXIOM_TOKEN}}#g" /tmp/vector.toml
+          cat /tmp/vector.toml
+          ${HOME}/.vector/bin/vector --config /tmp/vector.toml &
       - uses: taiki-e/install-action@cargo-llvm-cov
       - uses: taiki-e/install-action@nextest
       - name: Install just

.github/workflows/e2e-tests.yml

@@ -140,7 +140,7 @@ jobs:
         with:
           cache: false # Configured below.
 
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         if: ${{ needs.conditions.outputs.should-run == 'true' && steps.wasm.outputs.should-build-wasm == 'true' }}
         with:
           tool: wasm-pack
@@ -339,12 +339,22 @@ jobs:
         if: needs.conditions.outputs.should-run == 'true'
         run: yarn tronb:vite:dev
 
-      - name: Start Vector
-        if: ${{ needs.conditions.outputs.should-run == 'true' && !contains(matrix.os, 'windows') }}
-        run: .github/ci-cd-scripts/start-vector-${{ env.OS_NAME }}.sh
-        env:
-          GH_ACTIONS_AXIOM_TOKEN: ${{ secrets.GH_ACTIONS_AXIOM_TOKEN }}
-          OS_NAME: ${{ env.OS_NAME }}
+      - name: Install vector
+        if: ${{ needs.conditions.outputs.should-run == 'true' && contains(matrix.os, 'ubuntu') }}
+        shell: bash
+        run: |
+          curl --proto '=https' --tlsv1.2 -sSfL https://sh.vector.dev > /tmp/vector.sh
+          chmod +x /tmp/vector.sh
+          /tmp/vector.sh -y -no-modify-path
+          mkdir -p /tmp/vector
+          cp .github/workflows/vector.toml /tmp/vector.toml
+          sed -i "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
+          sed -i "s#GH_ACTIONS_AXIOM_TOKEN#${{secrets.GH_ACTIONS_AXIOM_TOKEN}}#g" /tmp/vector.toml
+          cat /tmp/vector.toml
+          ${HOME}/.vector/bin/vector --config /tmp/vector.toml &
 
       - uses: actions/download-artifact@v4
         if: ${{ needs.conditions.outputs.should-run == 'true' && !cancelled() && (success() || failure()) }}

.github/workflows/static-analysis.yml

@@ -51,7 +51,7 @@ jobs:
         with:
           cache: false # Configured below.
 
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
 
@@ -191,7 +191,7 @@ jobs:
           cache: 'yarn'
 
       - run: yarn install
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
 
@@ -236,7 +236,7 @@ jobs:
           cache: 'yarn'
 
       - run: yarn install
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
 

.github/workflows/vector.toml

@@ -8,7 +8,6 @@ include = ["/tmp/github-actions.log"]
 type = "remap"
 inputs = [ "github-actions-file" ]
 source = '''
-.platform = "OS_NAME"
 .action = "GITHUB_WORKFLOW"
 .repo = "GITHUB_REPOSITORY"
 .sha = "GITHUB_SHA"

.gitignore

@@ -26,7 +26,6 @@ yarn-error.log*
 .idea
 .vscode
 .helix
-result
 
 # rust
 rust/target

Makefile

@@ -5,18 +5,11 @@ all: install build check
 # INSTALL
 
 ifeq ($(OS),Windows_NT)
-export WINDOWS := true
-ifndef MSYSTEM
-export POWERSHELL := true
-endif
-endif
-
-ifdef WINDOWS
-CARGO ?= $(USERPROFILE)/.cargo/bin/cargo.exe
-WASM_PACK ?= $(USERPROFILE)/.cargo/bin/wasm-pack.exe
+	CARGO ?= ~/.cargo/bin/cargo.exe
+	WASM_PACK ?= ~/.cargo/bin/wasm-pack.exe
 else
-CARGO ?= ~/.cargo/bin/cargo
-WASM_PACK ?= ~/.cargo/bin/wasm-pack
+	CARGO ?= ~/.cargo/bin/cargo
+	WASM_PACK ?= ~/.cargo/bin/wasm-pack
 endif
 
 .PHONY: install
@@ -24,21 +17,21 @@ install: node_modules/.yarn-integrity $(CARGO) $(WASM_PACK) ## Install dependenc
 
 node_modules/.yarn-integrity: package.json yarn.lock
 	yarn install
-ifdef POWERSHELL
+ifeq ($(OS),Windows_NT)
 	@ type nul > $@
 else
 	@ touch $@
 endif
 
 $(CARGO):
-ifdef WINDOWS
+ifeq ($(OS),Windows_NT)
 	yarn install:rust:windows
 else
 	yarn install:rust
 endif
 
 $(WASM_PACK):
-ifdef WINDOWS
+ifeq ($(OS),Windows_NT)
 	yarn install:wasm-pack:cargo
 else
 	yarn install:wasm-pack:sh
@@ -64,7 +57,7 @@ build-web: install public/kcl_wasm_lib_bg.wasm build/index.html
 build-desktop: install public/kcl_wasm_lib_bg.wasm .vite/build/main.js
 
 public/kcl_wasm_lib_bg.wasm: $(CARGO_SOURCES) $(RUST_SOURCES)
-ifdef WINDOWS
+ifeq ($(OS),Windows_NT)
 	yarn build:wasm:dev:windows
 else
 	yarn build:wasm:dev
@@ -147,8 +140,8 @@ endif
 
 .PHONY: clean
 clean: ## Delete all artifacts
-ifdef POWERSHELL
-	git clean --force -d -x --exclude=.env* --exclude=**/*.env
+ifeq ($(OS),Windows_NT)
+	git clean --force -d -X
 else
 	rm -rf .vite/ build/
 	rm -rf trace.zip playwright-report/ test-results/
@@ -159,7 +152,7 @@ endif
 
 .PHONY: help
 help: install
-ifdef POWERSHELL
+ifeq ($(OS),Windows_NT)
 	@ powershell -Command "Get-Content $(MAKEFILE_LIST) | Select-String -Pattern '^[^\s]+:.*##\s.*$$' | ForEach-Object { $$line = $$_.Line -split ':.*?##\s+'; Write-Host -NoNewline $$line[0].PadRight(30) -ForegroundColor Cyan; Write-Host $$line[1] }"
 else
 	@ grep -E '^[^[:space:]]+:.*## .*$$' $(MAKEFILE_LIST) | awk 'BEGIN {FS = ":.*?## "}; {printf "\033[36m%-30s\033[0m %s\n", $$1, $$2}'

docs/kcl/abs.md

@@ -36,9 +36,9 @@ myAngle = -120
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [8, 0])
-  |> angledLine(angle = abs(myAngle), length = 5)
+  |> angledLine({ angle = abs(myAngle), length = 5 }, %)
   |> line(end = [-5, 0])
-  |> angledLine(angle = myAngle, length = 5)
+  |> angledLine({ angle = myAngle, length = 5 }, %)
   |> close()
 
 baseExtrusion = extrude(sketch001, length = 5)

docs/kcl/acos.md

@@ -33,7 +33,10 @@ acos(num: number): number
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = toDegrees(acos(0.5)), length = 10)
+  |> angledLine({
+       angle = toDegrees(acos(0.5)),
+       length = 10
+     }, %)
   |> line(end = [5, 0])
   |> line(endAbsolute = [12, 0])
   |> close()

docs/kcl/angleToMatchLengthX.md

@@ -36,7 +36,7 @@ angleToMatchLengthX(
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [2, 5], tag = $seg01)
-  |> angledLine(angle = -angleToMatchLengthX(seg01, 7, %), endAbsoluteX = 10)
+  |> angledLineToX([-angleToMatchLengthX(seg01, 7, %), 10], %)
   |> close()
 
 extrusion = extrude(sketch001, length = 5)

docs/kcl/angleToMatchLengthY.md

@@ -36,7 +36,10 @@ angleToMatchLengthY(
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [1, 2], tag = $seg01)
-  |> angledLine(angle = angleToMatchLengthY(seg01, 15, %), length = 5)
+  |> angledLine({
+       angle = angleToMatchLengthY(seg01, 15, %),
+       length = 5
+     }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/angledLine.md

@@ -10,13 +10,8 @@ Draw a line segment relative to the current origin using the polar measure of so
 
 ```js
 angledLine(
+  data: AngledLineData,
   sketch: Sketch,
-  angle: number,
-  length?: number,
-  lengthX?: number,
-  lengthY?: number,
-  endAbsoluteX?: number,
-  endAbsoluteY?: number,
   tag?: TagDeclarator,
 ): Sketch
 ```
@@ -26,14 +21,9 @@ angledLine(
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | Which sketch should this path be added to? | Yes |
-| `angle` | [`number`](/docs/kcl/types/number) | Which angle should the line be drawn at? | Yes |
-| `length` | [`number`](/docs/kcl/types/number) | Draw the line this distance along the given angle. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
-| `lengthX` | [`number`](/docs/kcl/types/number) | Draw the line this distance along the X axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
-| `lengthY` | [`number`](/docs/kcl/types/number) | Draw the line this distance along the Y axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
-| `endAbsoluteX` | [`number`](/docs/kcl/types/number) | Draw the line along the given angle until it reaches this point along the X axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
-| `endAbsoluteY` | [`number`](/docs/kcl/types/number) | Draw the line along the given angle until it reaches this point along the Y axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
-| [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Create a new tag which refers to this line | No |
+| `data` | [`AngledLineData`](/docs/kcl/types/AngledLineData) | Data to draw an angled line. | Yes |
+| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) |  | Yes |
+| [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) |  | No |
 
 ### Returns
 
@@ -46,7 +36,7 @@ angledLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> yLine(endAbsolute = 15)
-  |> angledLine(angle = 30, length = 15)
+  |> angledLine({ angle = 30, length = 15 }, %)
   |> line(end = [8, -10])
   |> yLine(endAbsolute = 0)
   |> close()

docs/kcl/asin.md

@@ -33,7 +33,10 @@ asin(num: number): number
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = toDegrees(asin(0.5)), length = 20)
+  |> angledLine({
+       angle = toDegrees(asin(0.5)),
+       length = 20
+     }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/atan.md

@@ -33,7 +33,10 @@ atan(num: number): number
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = toDegrees(atan(1.25)), length = 20)
+  |> angledLine({
+       angle = toDegrees(atan(1.25)),
+       length = 20
+     }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/atan2.md

@@ -24,8 +24,8 @@ atan2(
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `y` | [`number`](/docs/kcl/types/number) | Y | Yes |
-| `x` | [`number`](/docs/kcl/types/number) | X | Yes |
+| `y` | [`number`](/docs/kcl/types/number) |  | Yes |
+| `x` | [`number`](/docs/kcl/types/number) |  | Yes |
 
 ### Returns
 
@@ -37,7 +37,10 @@ atan2(
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = toDegrees(atan2(y = 1.25, x = 2)), length = 20)
+  |> angledLine({
+       angle = toDegrees(atan2(1.25, 2)),
+       length = 20
+     }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/chamfer.md

@@ -80,7 +80,7 @@ part001 = cube([0, 0], 20)
   // We tag the chamfer to reference it later.
   |> chamfer(length = 10, tags = [getOppositeEdge(line1)], tag = $chamfer1)
 
-sketch001 = startSketchOn(part001, face = chamfer1)
+sketch001 = startSketchOn(part001, chamfer1)
   |> startProfileAt([10, 10], %)
   |> line(end = [2, 0])
   |> line(end = [0, 2])

docs/kcl/consts/std-math-E.md

@@ -17,10 +17,10 @@ std::math::E: number = 2.71828182845904523536028747135266250_
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(
+  |> angledLine({
     angle = 30,
     length = 2 * E ^ 2,
-  )
+  }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/consts/std-math-PI.md

@@ -18,7 +18,7 @@ std::math::PI: number = 3.14159265358979323846264338327950288_
 circumference = 70
 
 exampleSketch = startSketchOn(XZ)
- |> circle(center = [0, 0], radius = circumference / (2 * PI))
+ |> circle(center = [0, 0], radius = circumference/ (2 * PI))
 
 example = extrude(exampleSketch, length = 5)
 ```

docs/kcl/consts/std-math-TAU.md

@@ -17,10 +17,10 @@ std::math::TAU: number = 6.28318530717958647692528676655900577_
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(
+  |> angledLine({
     angle = 50,
     length = 10 * TAU,
-  )
+  }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/e.md

@@ -30,7 +30,7 @@ e(): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 30, length = 2 * e() ^ 2)
+  |> angledLine({ angle = 30, length = 2 * e() ^ 2 }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/getNextAdjacentEdge.md

@@ -30,10 +30,10 @@ getNextAdjacentEdge(tag: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
-  |> angledLine(angle = 60, length = 10)
-  |> angledLine(angle = 120, length = 10)
+  |> angledLine({ angle = 60, length = 10 }, %)
+  |> angledLine({ angle = 120, length = 10 }, %)
   |> line(end = [-10, 0])
-  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
+  |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/getOppositeEdge.md

@@ -30,10 +30,10 @@ getOppositeEdge(tag: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
-  |> angledLine(angle = 60, length = 10)
-  |> angledLine(angle = 120, length = 10)
+  |> angledLine({ angle = 60, length = 10 }, %)
+  |> angledLine({ angle = 120, length = 10 }, %)
   |> line(end = [-10, 0])
-  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
+  |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/getPreviousAdjacentEdge.md

@@ -30,10 +30,10 @@ getPreviousAdjacentEdge(tag: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
-  |> angledLine(angle = 60, length = 10)
-  |> angledLine(angle = 120, length = 10)
+  |> angledLine({ angle = 60, length = 10 }, %)
+  |> angledLine({ angle = 120, length = 10 }, %)
   |> line(end = [-10, 0])
-  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
+  |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/hollow.md

@@ -69,11 +69,11 @@ case = startSketchOn(-XZ)
   |> close()
   |> extrude(length = 65)
 
-thing1 = startSketchOn(case, face = 'end')
+thing1 = startSketchOn(case, 'end')
   |> circle(center = [-size / 2, -size / 2], radius = 25)
   |> extrude(length = 50)
 
-thing2 = startSketchOn(case, face = 'end')
+thing2 = startSketchOn(case, 'end')
   |> circle(center = [size / 2, -size / 2], radius = 25)
   |> extrude(length = 50)
 

docs/kcl/index.md

@@ -43,7 +43,11 @@ layout: manual
   * [`angleToMatchLengthX`](kcl/angleToMatchLengthX)
   * [`angleToMatchLengthY`](kcl/angleToMatchLengthY)
   * [`angledLine`](kcl/angledLine)
+  * [`angledLineOfXLength`](kcl/angledLineOfXLength)
+  * [`angledLineOfYLength`](kcl/angledLineOfYLength)
   * [`angledLineThatIntersects`](kcl/angledLineThatIntersects)
+  * [`angledLineToX`](kcl/angledLineToX)
+  * [`angledLineToY`](kcl/angledLineToY)
   * [`appearance`](kcl/appearance)
   * [`arc`](kcl/arc)
   * [`arcTo`](kcl/arcTo)
@@ -61,15 +65,11 @@ layout: manual
   * [`chamfer`](kcl/chamfer)
   * [`circleThreePoint`](kcl/circleThreePoint)
   * [`close`](kcl/close)
+  * [`cm`](kcl/cm)
   * [`extrude`](kcl/extrude)
   * [`fillet`](kcl/fillet)
   * [`floor`](kcl/floor)
-  * [`fromCm`](kcl/fromCm)
-  * [`fromFt`](kcl/fromFt)
-  * [`fromInches`](kcl/fromInches)
-  * [`fromM`](kcl/fromM)
-  * [`fromMm`](kcl/fromMm)
-  * [`fromYd`](kcl/fromYd)
+  * [`ft`](kcl/ft)
   * [`getCommonEdge`](kcl/getCommonEdge)
   * [`getNextAdjacentEdge`](kcl/getNextAdjacentEdge)
   * [`getOppositeEdge`](kcl/getOppositeEdge)
@@ -77,7 +77,7 @@ layout: manual
   * [`helix`](kcl/std-helix)
   * [`hole`](kcl/hole)
   * [`hollow`](kcl/hollow)
-  * [`intersect`](kcl/intersect)
+  * [`inch`](kcl/inch)
   * [`lastSegX`](kcl/lastSegX)
   * [`lastSegY`](kcl/lastSegY)
   * [`legAngX`](kcl/legAngX)
@@ -89,9 +89,11 @@ layout: manual
   * [`log`](kcl/log)
   * [`log10`](kcl/log10)
   * [`log2`](kcl/log2)
+  * [`m`](kcl/m)
   * [`map`](kcl/map)
   * [`max`](kcl/max)
   * [`min`](kcl/min)
+  * [`mm`](kcl/mm)
   * [`offsetPlane`](kcl/offsetPlane)
   * [`patternCircular2d`](kcl/patternCircular2d)
   * [`patternCircular3d`](kcl/patternCircular3d)
@@ -99,6 +101,7 @@ layout: manual
   * [`patternLinear3d`](kcl/patternLinear3d)
   * [`patternTransform`](kcl/patternTransform)
   * [`patternTransform2d`](kcl/patternTransform2d)
+  * [`polar`](kcl/polar)
   * [`polygon`](kcl/polygon)
   * [`pop`](kcl/pop)
   * [`pow`](kcl/pow)
@@ -124,7 +127,6 @@ layout: manual
   * [`sqrt`](kcl/sqrt)
   * [`startProfileAt`](kcl/startProfileAt)
   * [`startSketchOn`](kcl/startSketchOn)
-  * [`subtract`](kcl/subtract)
   * [`sweep`](kcl/sweep)
   * [`tangentToEnd`](kcl/tangentToEnd)
   * [`tangentialArc`](kcl/tangentialArc)
@@ -133,15 +135,14 @@ layout: manual
   * [`toDegrees`](kcl/toDegrees)
   * [`toRadians`](kcl/toRadians)
   * [`translate`](kcl/translate)
-  * [`union`](kcl/union)
   * [`xLine`](kcl/xLine)
   * [`yLine`](kcl/yLine)
+  * [`yd`](kcl/yd)
 * **std::math**
   * [`E`](kcl/consts/std-math-E)
   * [`PI`](kcl/consts/std-math-PI)
   * [`TAU`](kcl/consts/std-math-TAU)
   * [`cos`](kcl/std-math-cos)
-  * [`polar`](kcl/std-math-polar)
   * [`sin`](kcl/std-math-sin)
   * [`tan`](kcl/std-math-tan)
 * **std::sketch**

docs/kcl/max.md

@@ -33,7 +33,10 @@ max(args: [number]): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 70, length = max(15, 31, 4, 13, 22))
+  |> angledLine({
+       angle = 70,
+       length = max(15, 31, 4, 13, 22)
+     }, %)
   |> line(end = [20, 0])
   |> close()
 

docs/kcl/min.md

@@ -33,7 +33,10 @@ min(args: [number]): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 70, length = min(15, 31, 4, 13, 22))
+  |> angledLine({
+       angle = 70,
+       length = min(15, 31, 4, 13, 22)
+     }, %)
   |> line(end = [20, 0])
   |> close()
 

docs/kcl/offsetPlane.md

@@ -20,7 +20,7 @@ offsetPlane(
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `plane` | [`PlaneData`](/docs/kcl/types/PlaneData) | The plane (e.g. XY) which this new plane is created from. | Yes |
+| `plane` | [`PlaneData`](/docs/kcl/types/PlaneData) | The plane (e.g. 'XY') which this new plane is created from. | Yes |
 | `offset` | [`number`](/docs/kcl/types/number) | Distance from the standard plane this new plane will be created at. | Yes |
 
 ### Returns

docs/kcl/patternLinear3d.md

@@ -61,11 +61,11 @@ case = startSketchOn(XY)
   |> close(%)
   |> extrude(length = 65)
 
-thing1 = startSketchOn(case, face = 'end')
+thing1 = startSketchOn(case, 'end')
   |> circle(center = [-size / 2, -size / 2], radius = 25)
   |> extrude(length = 50)
 
-thing2 = startSketchOn(case, face = 'end')
+thing2 = startSketchOn(case, 'end')
   |> circle(center = [size / 2, -size / 2], radius = 25)
   |> extrude(length = 50)
 
@@ -92,7 +92,7 @@ case = startSketchOn(XY)
   |> close(%)
   |> extrude(length = 65)
 
-thing1 = startSketchOn(case, face = 'end')
+thing1 = startSketchOn(case, 'end')
   |> circle(center = [-size / 2, -size / 2], radius = 25)
   |> extrude(length = 50)
 

docs/kcl/pow.md

@@ -37,7 +37,7 @@ pow(
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 50, length = pow(5, 2))
+  |> angledLine({ angle = 50, length = pow(5, 2) }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/profileStart.md

@@ -29,8 +29,11 @@ profileStart(sketch: Sketch): [number]
 ```js
 sketch001 = startSketchOn(XY)
   |> startProfileAt([5, 2], %)
-  |> angledLine(angle = 120, length = 50, tag = $seg01)
-  |> angledLine(angle = segAng(seg01) + 120, length = 50)
+  |> angledLine({ angle = 120, length = 50 }, %, $seg01)
+  |> angledLine({
+       angle = segAng(seg01) + 120,
+       length = 50
+     }, %)
   |> line(end = profileStart(%))
   |> close()
   |> extrude(length = 20)

docs/kcl/reduce.md

@@ -78,7 +78,7 @@ assertEqual(sum, 6, 0.00001, "1 + 2 + 3 summed is 6")
 ```js
 // Declare a function that sketches a decagon.
 fn decagon(radius) {
-  // Each side of the decagon is turned this many radians from the previous angle.
+  // Each side of the decagon is turned this many degrees from the previous angle.
   stepAngle = 1 / 10 * TAU
 
   // Start the decagon sketch at this point.

docs/kcl/rotate.md

@@ -151,9 +151,15 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
+  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       50.61
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 

docs/kcl/scale.md

@@ -85,9 +85,15 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
+  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       50.61
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 

docs/kcl/segAng.md

@@ -32,9 +32,9 @@ exampleSketch = startSketchOn(XZ)
   |> line(end = [10, 0])
   |> line(end = [5, 10], tag = $seg01)
   |> line(end = [-10, 0])
-  |> angledLine(angle = segAng(seg01), length = 10)
+  |> angledLine([segAng(seg01), 10], %)
   |> line(end = [-10, 0])
-  |> angledLine(angle = segAng(seg01), length = -15)
+  |> angledLine([segAng(seg01), -15], %)
   |> close()
 
 example = extrude(exampleSketch, length = 4)

docs/kcl/segLen.md

@@ -29,9 +29,9 @@ segLen(tag: TagIdentifier): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 60, length = 10, tag = $thing)
+  |> angledLine({ angle = 60, length = 10 }, %, $thing)
   |> tangentialArc({ offset = -120, radius = 5 }, %)
-  |> angledLine(angle = -60, length = segLen(thing))
+  |> angledLine({ angle = -60, length = segLen(thing) }, %)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/settings.md

@@ -6,7 +6,7 @@ layout: manual
 
 # KCL Settings
 
-There are three levels of settings available in Zoo Design Studio:
+There are three levels of settings available in the KittyCAD Design Studiolication:
 
 1. [User Settings](/docs/kcl/settings/user): Global settings that apply to all projects, stored in `user.toml`
 2. [Project Settings](/docs/kcl/settings/project): Settings specific to a project, stored in `project.toml`
@@ -14,7 +14,7 @@ There are three levels of settings available in Zoo Design Studio:
 
 ## Configuration Files
 
-Zoo Design Studio uses TOML files for configuration:
+The KittyCAD Design Studio uses TOML files for configuration:
 
 * **User Settings**: `user.toml` - See [complete documentation](/docs/kcl/settings/user)
 * **Project Settings**: `project.toml` - See [complete documentation](/docs/kcl/settings/project)

docs/kcl/settings/user.md

@@ -96,7 +96,7 @@ Permanently dismiss the banner warning to download the desktop app. This setting
 
 ##### stream_idle_mode
 
-When the user is idle, teardown the stream after some time.
+When the user is idle, and this is true, the stream will be torn down.
 
 
 **Default:** None

docs/kcl/shell.md

@@ -107,11 +107,11 @@ case = startSketchOn(-XZ)
   |> close()
   |> extrude(length = 65)
 
-thing1 = startSketchOn(case, face = 'end')
+thing1 = startSketchOn(case, 'end')
   |> circle(center = [-size / 2, -size / 2], radius = 25)
   |> extrude(length = 50)
 
-thing2 = startSketchOn(case, face = 'end')
+thing2 = startSketchOn(case, 'end')
   |> circle(center = [size / 2, -size / 2], radius = 25)
   |> extrude(length = 50)
 
@@ -132,11 +132,11 @@ case = startSketchOn(XY)
   |> close()
   |> extrude(length = 65)
 
-thing1 = startSketchOn(case, face = 'end')
+thing1 = startSketchOn(case, 'end')
   |> circle(center = [-size / 2, -size / 2], radius = 25)
   |> extrude(length = 50)
 
-thing2 = startSketchOn(case, face = 'end')
+thing2 = startSketchOn(case, 'end')
   |> circle(center = [size / 2, -size / 2], radius = 25)
   |> extrude(length = 50)
 
@@ -160,11 +160,11 @@ case = startSketchOn(XY)
   |> close()
   |> extrude(length = 65)
 
-thing1 = startSketchOn(case, face = 'end')
+thing1 = startSketchOn(case, 'end')
   |> circle(center = [-size / 2, -size / 2], radius = 25)
   |> extrude(length = 50)
 
-thing2 = startSketchOn(case, face = 'end')
+thing2 = startSketchOn(case, 'end')
   |> circle(center = [size / 2, -size / 2], radius = 25)
   |> extrude(length = 50)
 

docs/kcl/sqrt.md

@@ -33,7 +33,7 @@ sqrt(num: number): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 50, length = sqrt(2500))
+  |> angledLine({ angle = 50, length = sqrt(2500) }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/startSketchOn.md

@@ -18,8 +18,8 @@ The point is if you want to export the result of a sketch on a face, you only ne
 
 ```js
 startSketchOn(
-  planeOrSolid: SketchData,
-  face?: FaceTag,
+  data: SketchData,
+  tag?: FaceTag,
 ): SketchSurface
 ```
 
@@ -28,8 +28,8 @@ startSketchOn(
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `planeOrSolid` | [`SketchData`](/docs/kcl/types/SketchData) | The plane or solid to sketch on | Yes |
-| `face` | [`FaceTag`](/docs/kcl/types/FaceTag) | Identify a face of a solid if a solid is specified as the input argument (`plane_or_solid`) | No |
+| `data` | [`SketchData`](/docs/kcl/types/SketchData) | Data for start sketch on. You can start a sketch on a plane or an solid. | Yes |
+| [`tag`](/docs/kcl/types/tag) | [`FaceTag`](/docs/kcl/types/FaceTag) | A tag for a face. | No |
 
 ### Returns
 
@@ -48,7 +48,7 @@ exampleSketch = startSketchOn(XY)
 
 example = extrude(exampleSketch, length = 5)
 
-exampleSketch002 = startSketchOn(example, face = 'end')
+exampleSketch002 = startSketchOn(example, 'end')
   |> startProfileAt([1, 1], %)
   |> line(end = [8, 0])
   |> line(end = [0, 8])
@@ -57,7 +57,7 @@ exampleSketch002 = startSketchOn(example, face = 'end')
 
 example002 = extrude(exampleSketch002, length = 5)
 
-exampleSketch003 = startSketchOn(example002, face = 'end')
+exampleSketch003 = startSketchOn(example002, 'end')
   |> startProfileAt([2, 2], %)
   |> line(end = [6, 0])
   |> line(end = [0, 6])
@@ -82,7 +82,7 @@ exampleSketch = startSketchOn(XY)
 
 example = extrude(exampleSketch, length = 5, tagEnd = $end01)
 
-exampleSketch002 = startSketchOn(example, face = end01)
+exampleSketch002 = startSketchOn(example, end01)
   |> startProfileAt([1, 1], %)
   |> line(end = [8, 0])
   |> line(end = [0, 8])
@@ -91,7 +91,7 @@ exampleSketch002 = startSketchOn(example, face = end01)
 
 example002 = extrude(exampleSketch002, length = 5, tagEnd = $end02)
 
-exampleSketch003 = startSketchOn(example002, face = end02)
+exampleSketch003 = startSketchOn(example002, end02)
   |> startProfileAt([2, 2], %)
   |> line(end = [6, 0])
   |> line(end = [0, 6])
@@ -113,7 +113,7 @@ exampleSketch = startSketchOn(XY)
 
 example = extrude(exampleSketch, length = 10)
 
-exampleSketch002 = startSketchOn(example, face = sketchingFace)
+exampleSketch002 = startSketchOn(example, sketchingFace)
   |> startProfileAt([1, 1], %)
   |> line(end = [8, 0])
   |> line(end = [0, 8])
@@ -122,7 +122,7 @@ exampleSketch002 = startSketchOn(example, face = sketchingFace)
 
 example002 = extrude(exampleSketch002, length = 10)
 
-exampleSketch003 = startSketchOn(example002, face = sketchingFace002)
+exampleSketch003 = startSketchOn(example002, sketchingFace002)
   |> startProfileAt([-8, 12], %)
   |> line(end = [0, 6])
   |> line(end = [6, 0])
@@ -148,7 +148,7 @@ exampleSketch = startSketchOn(XY)
 
 example = revolve(exampleSketch, axis = Y, angle = 180)
 
-exampleSketch002 = startSketchOn(example, face = 'end')
+exampleSketch002 = startSketchOn(example, 'end')
   |> startProfileAt([4.5, -5], %)
   |> line(end = [0, 5])
   |> line(end = [5, 0])
@@ -182,7 +182,7 @@ example = revolve(
   tagEnd = $end01,
 )
 
-exampleSketch002 = startSketchOn(example, face = end01)
+exampleSketch002 = startSketchOn(example, end01)
   |> startProfileAt([4.5, -5], %)
   |> line(end = [0, 5])
   |> line(end = [5, 0])
@@ -196,10 +196,12 @@ example002 = extrude(exampleSketch002, length = 5)
 
 ```js
 a1 = startSketchOn({
+       plane = {
          origin = { x = 0, y = 0, z = 0 },
          xAxis = { x = 1, y = 0, z = 0 },
          yAxis = { x = 0, y = 1, z = 0 },
          zAxis = { x = 0, y = 0, z = 1 }
+       }
      })
   |> startProfileAt([0, 0], %)
   |> line(end = [100.0, 0])

docs/kcl/std-helix.md

@@ -9,15 +9,7 @@ Create a helix.
 
 
 ```js
-helix(
-  revolutions: number(_),
-  angleStart: number(Angle),
-  ccw?: bool,
-  radius?: number(Length),
-  axis?: Axis3d | Edge,
-  length?: number(Length),
-  cylinder?: Solid,
-): Helix
+helix(revolutions: number(_), angleStart: number(deg), ccw?: bool, radius?: number(mm), axis?: Axis3d | Edge, length?: number(mm), cylinder?: Solid): Helix
 ```
 
 
@@ -26,11 +18,11 @@ helix(
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `revolutions` | `number(_)` | Number of revolutions. | Yes |
-| `angleStart` | `number(Angle)` | Start angle (in degrees). | Yes |
+| `angleStart` | `number(deg)` | Start angle (in degrees). | Yes |
 | `ccw` | [`bool`](/docs/kcl/types/bool) | Is the helix rotation counter clockwise? The default is `false`. | No |
-| `radius` | `number(Length)` | Radius of the helix. | No |
+| `radius` | `number(mm)` | Radius of the helix. | No |
 | `axis` | `Axis3d | Edge` | Axis to use for the helix. | No |
-| `length` | `number(Length)` | Length of the helix. This is not necessary if the helix is created around an edge. If not given the length of the edge is used. | No |
+| `length` | `number(mm)` | Length of the helix. This is not necessary if the helix is created around an edge. If not given the length of the edge is used. | No |
 | `cylinder` | [`Solid`](/docs/kcl/types/Solid) | Cylinder to create the helix on. | No |
 
 ### Returns

docs/kcl/std-math-cos.md

@@ -9,7 +9,7 @@ Compute the cosine of a number (in radians).
 
 
 ```js
-cos(@num: number(Angle)): number(_)
+cos(@num: number(rad)): number(_)
 ```
 
 
@@ -17,7 +17,7 @@ cos(@num: number(Angle)): number(_)
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `num` | `number(Angle)` |  | Yes |
+| `num` | `number(rad)` |  | Yes |
 
 ### Returns
 
@@ -29,10 +29,10 @@ cos(@num: number(Angle)): number(_)
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(
+  |> angledLine({
     angle = 30,
     length = 3 / cos(toRadians(30)),
-  )
+  }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/std-math-tan.md

@@ -9,7 +9,7 @@ Compute the tangent of a number (in radians).
 
 
 ```js
-tan(@num: number(Angle)): number(_)
+tan(@num: number(rad)): number(_)
 ```
 
 
@@ -17,7 +17,7 @@ tan(@num: number(Angle)): number(_)
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `num` | `number(Angle)` |  | Yes |
+| `num` | `number(rad)` |  | Yes |
 
 ### Returns
 
@@ -29,10 +29,10 @@ tan(@num: number(Angle)): number(_)
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(
+  |> angledLine({
     angle = 50,
     length = 50 * tan(1/2),
-  )
+  }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/std-sketch-circle.md

@@ -6,16 +6,10 @@ layout: manual
 
 
 
-Construct a 2-dimensional circle, of the specified radius, centered at
-the provided (x, y) origin point.
+Construct a 2-dimensional circle, of the specified radius, centered atthe provided (x, y) origin point.
 
 ```js
-circle(
-  @sketch_or_surface: Sketch | Plane | Face,
-  center: Point2d,
-  radius: number(Length),
-  tag?: tag,
-): Sketch
+circle(@sketch_or_surface: Sketch | Plane | Face, center: Point2d, radius: number, tag?: tag): Sketch
 ```
 
 
@@ -25,7 +19,7 @@ circle(
 |----------|------|-------------|----------|
 | `sketch_or_surface` | [`Sketch`](/docs/kcl/types/Sketch) OR [`Plane`](/docs/kcl/types/Plane) OR [`Face`](/docs/kcl/types/Face) | Sketch to extend, or plane or surface to sketch on. | Yes |
 | `center` | [`Point2d`](/docs/kcl/types/Point2d) | The center of the circle. | Yes |
-| `radius` | `number(Length)` | The radius of the circle. | Yes |
+| `radius` | [`number`](/docs/kcl/types/number) | The radius of the circle. | Yes |
 | [`tag`](/docs/kcl/types/tag) | [`tag`](/docs/kcl/types/tag) | Create a new tag which refers to this circle. | No |
 
 ### Returns

docs/kcl/std-sketch-mirror2d.md

@@ -11,10 +11,7 @@ Only works on unclosed sketches for now.
 Mirror occurs around a local sketch axis rather than a global axis.
 
 ```js
-mirror2d(
-  @sketches: [Sketch; 1+],
-  axis: Axis2d | Edge,
-): Sketch
+mirror2d(@sketches: [Sketch; 1+], axis: Axis2d | Edge): Sketch
 ```
 
 
@@ -110,7 +107,7 @@ sketch0011 = startSketchOn(XY)
      |> mirror2d( axis = X )
      |> extrude(length = 10)
 
-sketch002 = startSketchOn(sketch0011, face = 'END')
+sketch002 = startSketchOn(sketch0011, 'END')
     |> circle( center = [-0.01, 1.58], radius = 1.2 )
     |> extrude(length = 1.2)
 

docs/kcl/sweep.md

@@ -91,9 +91,15 @@ springSketch = startSketchOn(YZ)
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
+  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       50.61
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 

docs/kcl/tangentToEnd.md

@@ -32,7 +32,10 @@ pillSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [20, 0])
   |> tangentialArcToRelative([0, 10], %, $arc1)
-  |> angledLine(angle = tangentToEnd(arc1), length = 20)
+  |> angledLine({
+       angle = tangentToEnd(arc1),
+       length = 20
+     }, %)
   |> tangentialArcToRelative([0, -10], %)
   |> close()
 
@@ -47,7 +50,10 @@ pillSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [0, 20])
   |> tangentialArcTo([10, 20], %, $arc1)
-  |> angledLine(angle = tangentToEnd(arc1), length = 20)
+  |> angledLine({
+       angle = tangentToEnd(arc1),
+       length = 20
+     }, %)
   |> tangentialArcToRelative([-10, 0], %)
   |> close()
 
@@ -60,7 +66,10 @@ pillExtrude = extrude(pillSketch, length = 10)
 rectangleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0], tag = $seg1)
-  |> angledLine(angle = tangentToEnd(seg1), length = 10)
+  |> angledLine({
+       angle = tangentToEnd(seg1),
+       length = 10
+     }, %)
   |> line(end = [0, 10])
   |> line(end = [-20, 0])
   |> close()
@@ -74,7 +83,7 @@ rectangleExtrude = extrude(rectangleSketch, length = 10)
 bottom = startSketchOn(XY)
   |> startProfileAt([0, 0], %)
   |> arcTo({ end = [10, 10], interior = [5, 1] }, %, $arc1)
-  |> angledLine(angle = tangentToEnd(arc1), length = 20)
+  |> angledLine([tangentToEnd(arc1), 20], %)
   |> close()
 ```
 
@@ -86,7 +95,7 @@ circSketch = startSketchOn(XY)
 
 triangleSketch = startSketchOn(XY)
   |> startProfileAt([-5, 0], %)
-  |> angledLine(angle = tangentToEnd(circ), length = 10)
+  |> angledLine([tangentToEnd(circ), 10], %)
   |> line(end = [-15, 0])
   |> close()
 ```

docs/kcl/tangentialArc.md

@@ -35,9 +35,9 @@ tangentialArc(
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 60, length = 10)
+  |> angledLine({ angle = 60, length = 10 }, %)
   |> tangentialArc({ radius = 10, offset = -120 }, %)
-  |> angledLine(angle = -60, length = 10)
+  |> angledLine({ angle = -60, length = 10 }, %)
   |> close()
 
 example = extrude(exampleSketch, length = 10)

docs/kcl/tangentialArcTo.md

@@ -35,7 +35,7 @@ tangentialArcTo(
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 60, length = 10)
+  |> angledLine({ angle = 60, length = 10 }, %)
   |> tangentialArcTo([15, 15], %)
   |> line(end = [10, -15])
   |> close()

docs/kcl/tangentialArcToRelative.md

@@ -35,7 +35,7 @@ tangentialArcToRelative(
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 45, length = 10)
+  |> angledLine({ angle = 45, length = 10 }, %)
   |> tangentialArcToRelative([0, -10], %)
   |> line(end = [-10, 0])
   |> close()

docs/kcl/tau.md

@@ -30,7 +30,7 @@ tau(): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 50, length = 10 * tau())
+  |> angledLine({ angle = 50, length = 10 * tau() }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/toDegrees.md

@@ -33,7 +33,10 @@ toDegrees(num: number): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 50, length = 70 * cos(toDegrees(pi() / 4)))
+  |> angledLine({
+       angle = 50,
+       length = 70 * cos(toDegrees(pi() / 4))
+     }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/toRadians.md

@@ -33,7 +33,10 @@ toRadians(num: number): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 50, length = 70 * cos(toRadians(45)))
+  |> angledLine({
+       angle = 50,
+       length = 70 * cos(toRadians(45))
+     }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/translate.md

@@ -86,9 +86,15 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
+  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       50.61
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 

docs/kcl/types.md

@@ -184,17 +184,15 @@ way:
 ```norun
 startSketchOn('XZ')
   |> startProfileAt(origin, %)
-  |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
-  |> angledLine(
+  |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
+  |> angledLine({
        angle = segAng(rectangleSegmentA001) - 90,
        length = 196.99,
-       tag = $rectangleSegmentB001,
-     )
-  |> angledLine(
+     }, %, $rectangleSegmentB001)
+  |> angledLine({
        angle = segAng(rectangleSegmentA001),
        length = -segLen(rectangleSegmentA001),
-       tag = $rectangleSegmentC001,
-     )
+     }, %, $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 ```
@@ -219,17 +217,15 @@ However if the code was written like this:
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
-    |> angledLine(
+    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
+    |> angledLine({
          angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99,
-         tag = $rectangleSegmentB001,
-       )
-    |> angledLine(
+         length = 196.99
+       }, %, $rectangleSegmentB001)
+    |> angledLine({
          angle = segAng(rectangleSegmentA001),
          length = -segLen(rectangleSegmentA001)
-         tag = $rectangleSegmentC001,
-       )
+       }, %, $rectangleSegmentC001)
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }
@@ -249,17 +245,15 @@ For example the following code works.
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
-    |> angledLine(
+    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
+    |> angledLine({
          angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99,
-         tag = $rectangleSegmentB001,
-       )
-    |> angledLine(
+         length = 196.99
+       }, %, $rectangleSegmentB001)
+    |> angledLine({
          angle = segAng(rectangleSegmentA001),
          length = -segLen(rectangleSegmentA001)
-         tag = $rectangleSegmentC001,
-       )
+       }, %, $rectangleSegmentC001)
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }

docs/kcl/types/AngledLineData.md

@@ -0,0 +1,46 @@
+---
+title: "AngledLineData"
+excerpt: "Data to draw an angled line."
+layout: manual
+---
+
+Data to draw an angled line.
+
+
+
+
+**This schema accepts any of the following:**
+
+An angle and length with explicitly named parameters
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `angle` |[`number`](/docs/kcl/types/number)| The angle of the line (in degrees). | No |
+| `length` |[`number`](/docs/kcl/types/number)| The length of the line. | No |
+
+
+----
+An angle and length given as a pair
+
+**Type:** `array`
+
+`[number, number]`
+
+
+
+
+
+----
+
+
+
+
+

docs/kcl/types/AngledLineThatIntersectsData.md

@@ -16,8 +16,8 @@ Data for drawing an angled line that intersects with a given line.
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `angle` |`TyF64`| The angle of the line. | No |
+| `angle` |[`number`](/docs/kcl/types/number)| The angle of the line. | No |
 | `intersectTag` |[`TagIdentifier`](/docs/kcl/types#tag-identifier)| The tag of the line to intersect with. | No |
-| `offset` |`TyF64`| The offset from the intersecting line. | No |
+| `offset` |[`number`](/docs/kcl/types/number)| The offset from the intersecting line. | No |
 
 

docs/kcl/types/AngledLineToData.md

@@ -0,0 +1,22 @@
+---
+title: "AngledLineToData"
+excerpt: "Data to draw an angled line to a point."
+layout: manual
+---
+
+Data to draw an angled line to a point.
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `angle` |[`number`](/docs/kcl/types/number)| The angle of the line. | No |
+| `to` |[`number`](/docs/kcl/types/number)| The point to draw to. | No |
+
+

docs/kcl/types/ArcData.md

@@ -23,9 +23,9 @@ Angles and radius with an optional tag.
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `angleStart` |`TyF64`| The start angle. | No |
-| `angleEnd` |`TyF64`| The end angle. | No |
-| `radius` |`TyF64`| The radius. | No |
+| `angleStart` |[`number`](/docs/kcl/types/number) (**maximum:** 360.0) (**minimum:** -360.0)| The start angle. | No |
+| `angleEnd` |[`number`](/docs/kcl/types/number) (**maximum:** 360.0) (**minimum:** -360.0)| The end angle. | No |
+| `radius` |[`number`](/docs/kcl/types/number)| The radius. | No |
 
 
 ----
@@ -41,9 +41,9 @@ Center, to and radius with an optional tag.
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `center` |`[, `TyF64`, `TyF64`]`| The center. | No |
-| `to` |`[, `TyF64`, `TyF64`]`| The to point. | No |
-| `radius` |`TyF64`| The radius. | No |
+| `center` |`[number, number]`| The center. | No |
+| `to` |`[number, number]`| The to point. | No |
+| `radius` |[`number`](/docs/kcl/types/number)| The radius. | No |
 
 
 ----

docs/kcl/types/ArcToData.md

@@ -16,7 +16,7 @@ Data to draw a three point arc (arcTo).
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `end` |`[, `TyF64`, `TyF64`]`| End point of the arc. A point in 3D space | No |
-| `interior` |`[, `TyF64`, `TyF64`]`| Interior point of the arc. A point in 3D space | No |
+| `end` |`[number, number]`| End point of the arc. A point in 3D space | No |
+| `interior` |`[number, number]`| Interior point of the arc. A point in 3D space | No |
 
 

docs/kcl/types/BezierData.md

@@ -16,8 +16,8 @@ Data to draw a bezier curve.
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `to` |`[, `TyF64`, `TyF64`]`| The to point. | No |
-| `control1` |`[, `TyF64`, `TyF64`]`| The first control point. | No |
-| `control2` |`[, `TyF64`, `TyF64`]`| The second control point. | No |
+| `to` |`[number, number]`| The to point. | No |
+| `control1` |`[number, number]`| The first control point. | No |
+| `control2` |`[number, number]`| The second control point. | No |
 
 

docs/kcl/types/EdgeCut.md

@@ -26,7 +26,7 @@ A fillet.
 |----------|------|-------------|----------|
 | `type` |enum: `fillet`|  | No |
 | `id` |[`string`](/docs/kcl/types/string)| The id of the engine command that called this fillet. | No |
-| `radius` |`TyF64`|  | No |
+| `radius` |[`number`](/docs/kcl/types/number)|  | No |
 | `edgeId` |[`string`](/docs/kcl/types/string)| The engine id of the edge to fillet. | No |
 | [`tag`](/docs/kcl/types/tag) |[`TagDeclarator`](/docs/kcl/types#tag-declaration)|  | No |
 
@@ -46,7 +46,7 @@ A chamfer.
 |----------|------|-------------|----------|
 | `type` |enum: `chamfer`|  | No |
 | `id` |[`string`](/docs/kcl/types/string)| The id of the engine command that called this chamfer. | No |
-| `length` |`TyF64`|  | No |
+| `length` |[`number`](/docs/kcl/types/number)|  | No |
 | `edgeId` |[`string`](/docs/kcl/types/string)| The engine id of the edge to chamfer. | No |
 | [`tag`](/docs/kcl/types/tag) |[`TagDeclarator`](/docs/kcl/types#tag-declaration)|  | No |
 

docs/kcl/types/KclValue.md

@@ -252,7 +252,7 @@ Data for an imported geometry.
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `type` |enum: `ImportedGeometry`|  | No |
+| `type` |enum: [`ImportedGeometry`](/docs/kcl/types/ImportedGeometry)|  | No |
 | `id` |[`string`](/docs/kcl/types/string)| The ID of the imported geometry. | No |
 | `value` |`[` [`string`](/docs/kcl/types/string) `]`| The original file paths. | No |
 

docs/kcl/types/NumericType.md

@@ -130,21 +130,6 @@ A unit of length.
 | `type` |enum: `Yards`|  | No |
 
 
-----
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Unknown`|  | No |
-
-
 ----
 
 
@@ -193,21 +178,6 @@ A unit of angle.
 | `type` |enum: `Radians`|  | No |
 
 
-----
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Unknown`|  | No |
-
-
 ----
 
 

docs/kcl/types/Point2d.md

@@ -7,7 +7,7 @@ layout: manual
 A point in two dimensional space.
 
 ```kcl
-type Point2d = [number(Length); 2]
+type Point2d = [number; 2]
 ```
 
 [`Point2d`](/docs/kcl/types/Point2d) is an alias for a two-element array of [number](/docs/kcl/types/number)s. To write a value

docs/kcl/types/Point3d.md

@@ -7,7 +7,7 @@ layout: manual
 A point in three dimensional space.
 
 ```kcl
-type Point3d = [number(Length); 3]
+type Point3d = [number; 3]
 ```
 
 [`Point3d`](/docs/kcl/types/Point3d) is an alias for a three-element array of [number](/docs/kcl/types/number)s. To write a value

docs/kcl/types/PolarCoordsData.md

@@ -0,0 +1,22 @@
+---
+title: "PolarCoordsData"
+excerpt: "Data for polar coordinates."
+layout: manual
+---
+
+Data for polar coordinates.
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `angle` |[`number`](/docs/kcl/types/number)| The angle of the line (in degrees). | No |
+| `length` |[`number`](/docs/kcl/types/number)| The length of the line. | No |
+
+

docs/kcl/types/PolygonData.md

@@ -16,9 +16,9 @@ Data for drawing a polygon
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `radius` |`TyF64`| The radius of the polygon | No |
+| `radius` |[`number`](/docs/kcl/types/number)| The radius of the polygon | No |
 | `numSides` |`integer`| The number of sides in the polygon | No |
-| `center` |`[, `TyF64`, `TyF64`]`| The center point of the polygon | No |
+| `center` |`[number, number]`| The center point of the polygon | No |
 | `inscribed` |`boolean`| Whether the polygon is inscribed (true) or circumscribed (false) about a circle with the specified radius | No |
 
 

docs/kcl/types/TangentialArcData.md

@@ -16,7 +16,7 @@ Data to draw a tangential arc.
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `radius` |`TyF64`| Radius of the arc. Not to be confused with Raiders of the Lost Ark. | No |
-| `offset` |`TyF64`| Offset of the arc, in degrees. | No |
+| `radius` |[`number`](/docs/kcl/types/number)| Radius of the arc. Not to be confused with Raiders of the Lost Ark. | No |
+| `offset` |[`number`](/docs/kcl/types/number)| Offset of the arc, in degrees. | No |
 
 

docs/kcl/types/UnitAngle.md

@@ -43,21 +43,6 @@ A unit of angle.
 
 ----
 
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Unknown`|  | No |
-
-
-----
-
 
 
 

docs/kcl/types/UnitLen.md

@@ -103,21 +103,6 @@ A unit of length.
 
 ----
 
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Unknown`|  | No |
-
-
-----
-
 
 
 

docs/kcl/types/tag.md

@@ -14,17 +14,15 @@ way:
 ```js
 startSketchOn('XZ')
   |> startProfileAt(origin, %)
-  |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
-  |> angledLine(
+  |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
+  |> angledLine({
        angle = segAng(rectangleSegmentA001) - 90,
        length = 196.99,
-       tag = $rectangleSegmentB001,
-     )
-  |> angledLine(
+     }, %, $rectangleSegmentB001)
+  |> angledLine({
        angle = segAng(rectangleSegmentA001),
        length = -segLen(rectangleSegmentA001),
-       tag = $rectangleSegmentC001,
-     )
+     }, %, $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 ```
@@ -48,16 +46,15 @@ However if the code was written like this:
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
-    |> angledLine(
+    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
+    |> angledLine({
          angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99,
-         tag = $rectangleSegmentB001)
-    |> angledLine(
+         length = 196.99
+       }, %, $rectangleSegmentB001)
+    |> angledLine({
          angle = segAng(rectangleSegmentA001),
-         length = -segLen(rectangleSegmentA001),
-         tag = $rectangleSegmentC001
-       )
+         length = -segLen(rectangleSegmentA001)
+       }, %, $rectangleSegmentC001)
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }
@@ -77,15 +74,15 @@ For example the following code works.
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
-    |> angledLine(
+    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
+    |> angledLine({
          angle = segAng(rectangleSegmentA001) - 90,
          length = 196.99
-       , %, $rectangleSegmentB001)
-    |> angledLine(
+       }, %, $rectangleSegmentB001)
+    |> angledLine({
          angle = segAng(rectangleSegmentA001),
          length = -segLen(rectangleSegmentA001)
-       , %, $rectangleSegmentC001)
+       }, %, $rectangleSegmentC001)
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }

docs/kcl/xLine.md

@@ -38,10 +38,10 @@ xLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> xLine(length = 15)
-  |> angledLine(angle = 80, length = 15)
+  |> angledLine({ angle = 80, length = 15 }, %)
   |> line(end = [8, -10])
   |> xLine(length = 10)
-  |> angledLine(angle = 120, length = 30)
+  |> angledLine({ angle = 120, length = 30 }, %)
   |> xLine(length = -15)
   |> close()