make delet of extrusions work for multi profile

Co-authored-by: Frank Noirot <frank@zoo.dev>

.gitattributes

@@ -1,13 +0,0 @@
-# Set default behavior to automatically normalize line endings.
-* text=auto
-
-# Force batch scripts to always use CRLF line endings so that if a repo is accessed
-# in Windows via a file share from Linux, the scripts will work.
-*.{cmd,[cC][mM][dD]} text working-tree-encoding=UTF-16LE eol=CRLF
-*.{bat,[bB][aA][tT]} text working-tree-encoding=UTF-16LE eol=CRLF
-*.{ics,[iI][cC][sS]} text working-tree-encoding=UTF-16LE eol=CRLF
-*.{ps1,[iP][sS][1]} text working-tree-encoding=UTF-16LE eol=CRLF
-
-# Force bash scripts to always use LF line endings so that if a repo is accessed
-# in Unix via a file share from Windows, the scripts will work.
-*.sh text eol=lfol=lf

.github/ci-cd-scripts/playwright-electron.sh

@@ -21,7 +21,7 @@ if [[ ! -f "test-results/.last-run.json" ]]; then
 fi
 
 retry=1
-max_retrys=1
+max_retrys=5
 
 # retry failed tests, doing our own retries because using inbuilt playwright retries causes connection issues
 while [[ $retry -le $max_retrys ]]; do

.github/workflows/build-and-store-wasm.yml

@@ -22,9 +22,6 @@ jobs:
         uses: Swatinem/rust-cache@v2
         with:
           workspaces: './src/wasm-lib'
-      - uses: taiki-e/install-action@2dbeb927f58939d3aa13bf06ba0c0a34b76b9bfb
-        with:
-          tool: wasm-pack
       - name: build wasm
         run: yarn build:wasm
 

.github/workflows/build-apps.yml

@@ -32,6 +32,7 @@ jobs:
       - uses: actions/setup-node@v4
         with:
           node-version-file: '.nvmrc'
+          cache: 'yarn'
 
       - run: yarn install
 
@@ -43,10 +44,6 @@ jobs:
           workspaces: './src/wasm-lib'
 
       # TODO: see if we can fetch from main instead if no diff at src/wasm-lib
-      - uses: taiki-e/install-action@2dbeb927f58939d3aa13bf06ba0c0a34b76b9bfb
-        with:
-          tool: wasm-pack
-
       - name: Run build:wasm
         run: "yarn build:wasm"
 
@@ -123,13 +120,15 @@ jobs:
           cp prepared-files/assets/icon.ico assets/icon.ico
           cp prepared-files/assets/icon.png assets/icon.png
 
-      - uses: actions/setup-node@v4
+      - name: Sync node version and setup cache
+        uses: actions/setup-node@v4
         with:
           node-version-file: '.nvmrc'
+          cache: 'yarn' # Set this to npm, yarn or pnpm.
 
       - name: yarn install
         # Windows is picky sometimes and fails on fetch. Step takes about ~30s
-        uses: nick-fields/retry@v3.0.1
+        uses: nick-fields/retry@v3.0.0
         with:
           timeout_minutes: 2
           max_attempts: 3
@@ -180,7 +179,7 @@ jobs:
           WINDOWS_CERTIFICATE_THUMBPRINT: ${{ secrets.WINDOWS_CERTIFICATE_THUMBPRINT }}
           DEBUG: "electron-notarize*"
         # TODO: Fix electron-notarize flakes. The logs above should help gather more data on failures
-        uses: nick-fields/retry@v3.0.1
+        uses: nick-fields/retry@v3.0.0
         with:
           timeout_minutes: 10
           max_attempts: 3
@@ -241,7 +240,7 @@ jobs:
           WINDOWS_CERTIFICATE_THUMBPRINT: ${{ secrets.WINDOWS_CERTIFICATE_THUMBPRINT }}
           DEBUG: "electron-notarize*"
         # TODO: Fix electron-notarize flakes. The logs above should help gather more data on failures
-        uses: nick-fields/retry@v3.0.1
+        uses: nick-fields/retry@v3.0.0
         with:
           timeout_minutes: 10
           max_attempts: 3

.github/workflows/cargo-test.yml

@@ -46,7 +46,7 @@ jobs:
         shell: bash
         run: |-
           cd "${{ matrix.dir }}"
-          cargo llvm-cov nextest --workspace --lcov --output-path lcov.info --test-threads=1 --retries=2 --no-fail-fast -P ci 2>&1 | tee /tmp/github-actions.log
+          cargo llvm-cov nextest --workspace --lcov --output-path lcov.info --test-threads=1 --no-fail-fast -P ci 2>&1 | tee /tmp/github-actions.log
         env:
           KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN}}
           RUST_MIN_STACK: 10485760000

.github/workflows/check-exampleKcl.yml

@@ -27,15 +27,6 @@ jobs:
             const owner = context.repo.owner;
             const repo = context.repo.repo;
 
-            const { data: comments } = await github.rest.issues.listComments({
-              owner,
-              repo,
-              issue_number
-            });
-
-            const commentExists = comments.some(comment => comment.body === message);
-
-            if (!commentExists) {
             // Post a comment on the PR
             await github.rest.issues.createComment({
               owner,
@@ -43,4 +34,3 @@ jobs:
               issue_number,
               body: message,
             });
-            }

.github/workflows/e2e-tests.yml

@@ -89,9 +89,6 @@ jobs:
       continue-on-error: true
     - name: Setup Rust
       uses: dtolnay/rust-toolchain@stable
-    - uses: taiki-e/install-action@2dbeb927f58939d3aa13bf06ba0c0a34b76b9bfb
-      with:
-        tool: wasm-pack
     - name: Cache Wasm (because rust diff)
       if: needs.check-rust-changes.outputs.rust-changed == 'true'
       uses: Swatinem/rust-cache@v2
@@ -203,11 +200,9 @@ jobs:
     - name: Run playwright/electron flow (with retries)
       id: retry
       if: ${{ !cancelled() && (success() || failure()) }}
-      uses: nick-fields/retry@v3.0.1
-      with:
-        command: .github/ci-cd-scripts/playwright-electron.sh ${{matrix.shardIndex}} ${{matrix.shardTotal}} ${{matrix.os}}
-        timeout_minutes: 30
-        max_attempts: 25
+      shell: bash
+      run: |
+        .github/ci-cd-scripts/playwright-electron.sh ${{matrix.shardIndex}} ${{matrix.shardTotal}} ${{matrix.os}}
       env:
         CI: true
         FAIL_ON_CONSOLE_ERRORS: true

.github/workflows/static-analysis.yml

@@ -37,9 +37,6 @@ jobs:
           node-version-file: '.nvmrc'
           cache: 'yarn'
       - run: yarn install
-      - uses: taiki-e/install-action@2dbeb927f58939d3aa13bf06ba0c0a34b76b9bfb
-        with:
-          tool: wasm-pack
       - run: yarn build:wasm
 
   yarn-tsc:
@@ -56,9 +53,6 @@ jobs:
         with:
           workspaces: './src/wasm-lib'
 
-      - uses: taiki-e/install-action@2dbeb927f58939d3aa13bf06ba0c0a34b76b9bfb
-        with:
-          tool: wasm-pack
       - run: yarn build:wasm
       - run: yarn tsc
 
@@ -98,9 +92,6 @@ jobs:
           cache: 'yarn'
 
       - run: yarn install
-      - uses: taiki-e/install-action@2dbeb927f58939d3aa13bf06ba0c0a34b76b9bfb
-        with:
-          tool: wasm-pack
       - run: yarn build:wasm
 
       - run: yarn simpleserver:bg
@@ -127,9 +118,6 @@ jobs:
           cache: 'yarn'
 
       - run: yarn install
-      - uses: taiki-e/install-action@2dbeb927f58939d3aa13bf06ba0c0a34b76b9bfb
-        with:
-          tool: wasm-pack
       - run: yarn build:wasm
 
       - run: yarn simpleserver:bg

.gitignore

@@ -24,7 +24,7 @@ yarn-debug.log*
 yarn-error.log*
 
 .idea
-# .vscode
+.vscode
 .helix
 src/wasm-lib/.idea
 src/wasm-lib/.vscode
@@ -41,12 +41,9 @@ e2e/playwright/playwright-secrets.env
 e2e/playwright/temp1.png
 e2e/playwright/temp2.png
 e2e/playwright/temp3.png
-# this will be overridden for specific directories
-e2e/playwright/**/*.png
 # exports from snapshot-tests.spec.ts "exports of each format should work"
 e2e/playwright/export-snapshots/*
 !e2e/playwright/export-snapshots/*.png
-!e2e/playwright/snapshot-tests.spec.ts-snapshots/*.png
 
 /kcl-samples
 /test-results/

.vscode/settings.json

@@ -1,5 +0,0 @@
-{
-    "rust-analyzer.linkedProjects": [
-        "src/wasm-lib/Cargo.toml"
-    ]
-}

README.md

@@ -48,49 +48,22 @@ We recommend downloading the latest application binary from [our Releases page](
 
 ## Running a development build
 
-Install a node version manager such as [fnm](https://github.com/Schniz/fnm?tab=readme-ov-#installation).
+First, [install Rust via `rustup`](https://www.rust-lang.org/tools/install). This project uses a lot of Rust compiled to [WASM](https://webassembly.org/) within it. We always use the latest stable version of Rust, so you may need to run `rustup update stable`. Then, run:
 
-On Windows, it's also recommended to [upgrade your PowerShell version](https://learn.microsoft.com/en-us/powershell/scripting/install/installing-powershell-on-windows?view=powershell-7.5#winget), we're using 7.
-
-Then in the repo run the following to install and use the node version specified in `.nvmrc`. You might need to specify your processor architecture with `--arch arm64` or `--arch x64` if it's not autodetected. 
-```
-fnm install --corepack-enabled
-fnm use
-```
-
-Install the NPM dependencies with:
 ```
 yarn install
 ```
 
-This project uses a lot of Rust compiled to [WASM](https://webassembly.org/) within it. We have package scripts to run rustup, see `package.json` for reference:
-```
-# macOS/Linux
-yarn install:rust
-yarn install:wasm-pack:sh
+followed by:
 
-# Windows
-yarn install:rust:windows
-yarn install:wasm-pack:cargo
 ```
-
-Then to build the WASM layer, run:
-```
-# macOS/Linux
 yarn build:wasm
-
-# Windows
-yarn build:wasm:windows
 ```
 
-Or if you have the `gh` cli installed and want to download the latest main wasm bundle. Note that on Windows, you need to associate .ps1 files with PowerShell, which can be done via the right click menu, selecting `C:\Program Files\PowerShell\7\pwsh.exe`, and you can install tools like `gh` via `yarn install:tools:windows`.
+or if you have the gh cli installed
 
 ```
-# macOS/Linux
-yarn fetch:wasm
-
-# Windows
-yarn fetch:wasm:windows
+./get-latest-wasm-bundle.sh # this will download the latest main wasm bundle
 ```
 
 That will build the WASM binary and put in the `public` dir (though gitignored).
@@ -101,7 +74,7 @@ Finally, to run the web app only, run:
 yarn start
 ```
 
-If you're not a Zoo employee you won't be able to access the dev environment, you should copy everything from `.env.production` to `.env.development` to make it point to production instead, then when you navigate to `localhost:3000` the easiest way to sign in is to paste `localStorage.setItem('TOKEN_PERSIST_KEY', "your-token-from-https://zoo.dev/account/api-tokens")` replacing the with a real token from https://zoo.dev/account/api-tokens of course, then navigate to localhost:3000 again. Note that navigating to `localhost:3000/signin` removes your token so you will need to set the token again.
+If you're not an KittyCAD employee you won't be able to access the dev environment, you should copy everything from `.env.production` to `.env.development` to make it point to production instead, then when you navigate to `localhost:3000` the easiest way to sign in is to paste `localStorage.setItem('TOKEN_PERSIST_KEY', "your-token-from-https://zoo.dev/account/api-tokens")` replacing the with a real token from https://zoo.dev/account/api-tokens of course, then navigate to localhost:3000 again. Note that navigating to `localhost:3000/signin` removes your token so you will need to set the token again.
 
 ### Development environment variables
 
@@ -128,7 +101,7 @@ This will start the application and hot-reload on changes.
 
 Devtools can be opened with the usual Cmd-Opt-I (Mac) or Ctrl-Shift-I (Linux and Windows).
 
-To package the app for your platform with electron-builder, run `yarn tronb:package:dev` (or `yarn tronb:package:prod` to point to the .env.production variables)
+To build with electron-builder, run `yarn tronb:package:dev` (or `yarn tronb:package:prod` to point to the .env.production variables)
 
 ## Checking out commits / Bisecting
 

docs/kcl/HALF_TURN.md

@@ -1,15 +0,0 @@
----
-title: "HALF_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-HALF_TURN: number(deg) = 180deg
-```
-
-

docs/kcl/QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-QUARTER_TURN: number(deg) = 90deg
-```
-
-

docs/kcl/THREE_QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "THREE_QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-THREE_QUARTER_TURN: number(deg) = 270deg
-```
-
-

docs/kcl/ZERO.md

@@ -1,15 +0,0 @@
----
-title: "ZERO"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-ZERO: number = 0
-```
-
-

docs/kcl/const_HALF_TURN.md

@@ -1,15 +0,0 @@
----
-title: "HALF_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-HALF_TURN: number(deg) = 180deg
-```
-
-

docs/kcl/const_QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-QUARTER_TURN: number(deg) = 90deg
-```
-
-

docs/kcl/const_THREE_QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "THREE_QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-THREE_QUARTER_TURN: number(deg) = 270deg
-```
-
-

docs/kcl/const_ZERO.md

@@ -1,15 +0,0 @@
----
-title: "ZERO"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-ZERO: number = 0
-```
-
-

docs/kcl/const_std-HALF_TURN.md

@@ -1,15 +0,0 @@
----
-title: "std::HALF_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::HALF_TURN: number(deg) = 180deg
-```
-
-

docs/kcl/const_std-QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "std::QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::QUARTER_TURN: number(deg) = 90deg
-```
-
-

docs/kcl/const_std-THREE_QUARTER_TURN.md

@@ -1,15 +0,0 @@
----
-title: "std::THREE_QUARTER_TURN"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::THREE_QUARTER_TURN: number(deg) = 270deg
-```
-
-

docs/kcl/const_std-ZERO.md

@@ -1,15 +0,0 @@
----
-title: "std::ZERO"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-```js
-std::ZERO: number = 0
-```
-
-

docs/kcl/e.md

@@ -4,11 +4,9 @@ excerpt: "Return the value of Euler’s number `e`."
 layout: manual
 ---
 
-**WARNING:** This function is deprecated.
-
 Return the value of Euler’s number `e`.
 
-**DEPRECATED** use the constant E
+
 
 ```js
 e() -> number

docs/kcl/index.md

@@ -9,116 +9,110 @@ layout: manual
 * [Types](kcl/types)
 * [Modules](kcl/modules)
 * [Known Issues](kcl/KNOWN-ISSUES)
-* **`std`**
-  * [`HALF_TURN`](kcl/const_std-HALF_TURN)
-  * [`QUARTER_TURN`](kcl/const_std-QUARTER_TURN)
-  * [`THREE_QUARTER_TURN`](kcl/const_std-THREE_QUARTER_TURN)
-  * [`ZERO`](kcl/const_std-ZERO)
-  * [`abs`](kcl/abs)
-  * [`acos`](kcl/acos)
-  * [`angleToMatchLengthX`](kcl/angleToMatchLengthX)
-  * [`angleToMatchLengthY`](kcl/angleToMatchLengthY)
-  * [`angledLine`](kcl/angledLine)
-  * [`angledLineOfXLength`](kcl/angledLineOfXLength)
-  * [`angledLineOfYLength`](kcl/angledLineOfYLength)
-  * [`angledLineThatIntersects`](kcl/angledLineThatIntersects)
-  * [`angledLineToX`](kcl/angledLineToX)
-  * [`angledLineToY`](kcl/angledLineToY)
-  * [`appearance`](kcl/appearance)
-  * [`arc`](kcl/arc)
-  * [`arcTo`](kcl/arcTo)
-  * [`asin`](kcl/asin)
-  * [`assert`](kcl/assert)
-  * [`assertEqual`](kcl/assertEqual)
-  * [`assertGreaterThan`](kcl/assertGreaterThan)
-  * [`assertGreaterThanOrEq`](kcl/assertGreaterThanOrEq)
-  * [`assertLessThan`](kcl/assertLessThan)
-  * [`assertLessThanOrEq`](kcl/assertLessThanOrEq)
-  * [`atan`](kcl/atan)
-  * [`atan2`](kcl/atan2)
-  * [`bezierCurve`](kcl/bezierCurve)
-  * [`ceil`](kcl/ceil)
-  * [`chamfer`](kcl/chamfer)
-  * [`circle`](kcl/circle)
-  * [`circleThreePoint`](kcl/circleThreePoint)
-  * [`close`](kcl/close)
-  * [`cm`](kcl/cm)
-  * [`extrude`](kcl/extrude)
-  * [`fillet`](kcl/fillet)
-  * [`floor`](kcl/floor)
-  * [`ft`](kcl/ft)
-  * [`getNextAdjacentEdge`](kcl/getNextAdjacentEdge)
-  * [`getOppositeEdge`](kcl/getOppositeEdge)
-  * [`getPreviousAdjacentEdge`](kcl/getPreviousAdjacentEdge)
-  * [`helix`](kcl/helix)
-  * [`helixRevolutions`](kcl/helixRevolutions)
-  * [`hole`](kcl/hole)
-  * [`hollow`](kcl/hollow)
-  * [`inch`](kcl/inch)
-  * [`lastSegX`](kcl/lastSegX)
-  * [`lastSegY`](kcl/lastSegY)
-  * [`legAngX`](kcl/legAngX)
-  * [`legAngY`](kcl/legAngY)
-  * [`legLen`](kcl/legLen)
-  * [`line`](kcl/line)
-  * [`ln`](kcl/ln)
-  * [`loft`](kcl/loft)
-  * [`log`](kcl/log)
-  * [`log10`](kcl/log10)
-  * [`log2`](kcl/log2)
-  * [`m`](kcl/m)
-  * [`map`](kcl/map)
-  * [`max`](kcl/max)
-  * [`min`](kcl/min)
-  * [`mirror2d`](kcl/mirror2d)
-  * [`mm`](kcl/mm)
-  * [`offsetPlane`](kcl/offsetPlane)
-  * [`patternCircular2d`](kcl/patternCircular2d)
-  * [`patternCircular3d`](kcl/patternCircular3d)
-  * [`patternLinear2d`](kcl/patternLinear2d)
-  * [`patternLinear3d`](kcl/patternLinear3d)
-  * [`patternTransform`](kcl/patternTransform)
-  * [`patternTransform2d`](kcl/patternTransform2d)
-  * [`polar`](kcl/polar)
-  * [`polygon`](kcl/polygon)
-  * [`pop`](kcl/pop)
-  * [`pow`](kcl/pow)
-  * [`profileStart`](kcl/profileStart)
-  * [`profileStartX`](kcl/profileStartX)
-  * [`profileStartY`](kcl/profileStartY)
-  * [`push`](kcl/push)
-  * [`reduce`](kcl/reduce)
-  * [`rem`](kcl/rem)
-  * [`revolve`](kcl/revolve)
-  * [`round`](kcl/round)
-  * [`segAng`](kcl/segAng)
-  * [`segEnd`](kcl/segEnd)
-  * [`segEndX`](kcl/segEndX)
-  * [`segEndY`](kcl/segEndY)
-  * [`segLen`](kcl/segLen)
-  * [`segStart`](kcl/segStart)
-  * [`segStartX`](kcl/segStartX)
-  * [`segStartY`](kcl/segStartY)
-  * [`shell`](kcl/shell)
-  * [`sqrt`](kcl/sqrt)
-  * [`startProfileAt`](kcl/startProfileAt)
-  * [`startSketchOn`](kcl/startSketchOn)
-  * [`sweep`](kcl/sweep)
-  * [`tangentToEnd`](kcl/tangentToEnd)
-  * [`tangentialArc`](kcl/tangentialArc)
-  * [`tangentialArcTo`](kcl/tangentialArcTo)
-  * [`tangentialArcToRelative`](kcl/tangentialArcToRelative)
-  * [`toDegrees`](kcl/toDegrees)
-  * [`toRadians`](kcl/toRadians)
-  * [`xLine`](kcl/xLine)
-  * [`xLineTo`](kcl/xLineTo)
-  * [`yLine`](kcl/yLine)
-  * [`yLineTo`](kcl/yLineTo)
-  * [`yd`](kcl/yd)
-* **`std::math`**
-  * [`E`](kcl/const_std-math-E)
-  * [`PI`](kcl/const_std-math-PI)
-  * [`TAU`](kcl/const_std-math-TAU)
-  * [`cos`](kcl/std-math-cos)
-  * [`sin`](kcl/std-math-sin)
-  * [`tan`](kcl/std-math-tan)
+* [`abs`](kcl/abs)
+* [`acos`](kcl/acos)
+* [`angleToMatchLengthX`](kcl/angleToMatchLengthX)
+* [`angleToMatchLengthY`](kcl/angleToMatchLengthY)
+* [`angledLine`](kcl/angledLine)
+* [`angledLineOfXLength`](kcl/angledLineOfXLength)
+* [`angledLineOfYLength`](kcl/angledLineOfYLength)
+* [`angledLineThatIntersects`](kcl/angledLineThatIntersects)
+* [`angledLineToX`](kcl/angledLineToX)
+* [`angledLineToY`](kcl/angledLineToY)
+* [`appearance`](kcl/appearance)
+* [`arc`](kcl/arc)
+* [`arcTo`](kcl/arcTo)
+* [`asin`](kcl/asin)
+* [`assert`](kcl/assert)
+* [`assertEqual`](kcl/assertEqual)
+* [`assertGreaterThan`](kcl/assertGreaterThan)
+* [`assertGreaterThanOrEq`](kcl/assertGreaterThanOrEq)
+* [`assertLessThan`](kcl/assertLessThan)
+* [`assertLessThanOrEq`](kcl/assertLessThanOrEq)
+* [`atan`](kcl/atan)
+* [`atan2`](kcl/atan2)
+* [`bezierCurve`](kcl/bezierCurve)
+* [`ceil`](kcl/ceil)
+* [`chamfer`](kcl/chamfer)
+* [`circle`](kcl/circle)
+* [`circleThreePoint`](kcl/circleThreePoint)
+* [`close`](kcl/close)
+* [`cm`](kcl/cm)
+* [`cos`](kcl/cos)
+* [`e`](kcl/e)
+* [`extrude`](kcl/extrude)
+* [`fillet`](kcl/fillet)
+* [`floor`](kcl/floor)
+* [`ft`](kcl/ft)
+* [`getNextAdjacentEdge`](kcl/getNextAdjacentEdge)
+* [`getOppositeEdge`](kcl/getOppositeEdge)
+* [`getPreviousAdjacentEdge`](kcl/getPreviousAdjacentEdge)
+* [`helix`](kcl/helix)
+* [`helixRevolutions`](kcl/helixRevolutions)
+* [`hole`](kcl/hole)
+* [`hollow`](kcl/hollow)
+* [`inch`](kcl/inch)
+* [`lastSegX`](kcl/lastSegX)
+* [`lastSegY`](kcl/lastSegY)
+* [`legAngX`](kcl/legAngX)
+* [`legAngY`](kcl/legAngY)
+* [`legLen`](kcl/legLen)
+* [`line`](kcl/line)
+* [`ln`](kcl/ln)
+* [`loft`](kcl/loft)
+* [`log`](kcl/log)
+* [`log10`](kcl/log10)
+* [`log2`](kcl/log2)
+* [`m`](kcl/m)
+* [`map`](kcl/map)
+* [`max`](kcl/max)
+* [`min`](kcl/min)
+* [`mirror2d`](kcl/mirror2d)
+* [`mm`](kcl/mm)
+* [`offsetPlane`](kcl/offsetPlane)
+* [`patternCircular2d`](kcl/patternCircular2d)
+* [`patternCircular3d`](kcl/patternCircular3d)
+* [`patternLinear2d`](kcl/patternLinear2d)
+* [`patternLinear3d`](kcl/patternLinear3d)
+* [`patternTransform`](kcl/patternTransform)
+* [`patternTransform2d`](kcl/patternTransform2d)
+* [`pi`](kcl/pi)
+* [`polar`](kcl/polar)
+* [`polygon`](kcl/polygon)
+* [`pop`](kcl/pop)
+* [`pow`](kcl/pow)
+* [`profileStart`](kcl/profileStart)
+* [`profileStartX`](kcl/profileStartX)
+* [`profileStartY`](kcl/profileStartY)
+* [`push`](kcl/push)
+* [`reduce`](kcl/reduce)
+* [`rem`](kcl/rem)
+* [`revolve`](kcl/revolve)
+* [`round`](kcl/round)
+* [`segAng`](kcl/segAng)
+* [`segEnd`](kcl/segEnd)
+* [`segEndX`](kcl/segEndX)
+* [`segEndY`](kcl/segEndY)
+* [`segLen`](kcl/segLen)
+* [`segStart`](kcl/segStart)
+* [`segStartX`](kcl/segStartX)
+* [`segStartY`](kcl/segStartY)
+* [`shell`](kcl/shell)
+* [`sin`](kcl/sin)
+* [`sqrt`](kcl/sqrt)
+* [`startProfileAt`](kcl/startProfileAt)
+* [`startSketchOn`](kcl/startSketchOn)
+* [`sweep`](kcl/sweep)
+* [`tan`](kcl/tan)
+* [`tangentToEnd`](kcl/tangentToEnd)
+* [`tangentialArc`](kcl/tangentialArc)
+* [`tangentialArcTo`](kcl/tangentialArcTo)
+* [`tangentialArcToRelative`](kcl/tangentialArcToRelative)
+* [`tau`](kcl/tau)
+* [`toDegrees`](kcl/toDegrees)
+* [`toRadians`](kcl/toRadians)
+* [`xLine`](kcl/xLine)
+* [`xLineTo`](kcl/xLineTo)
+* [`yLine`](kcl/yLine)
+* [`yLineTo`](kcl/yLineTo)
+* [`yd`](kcl/yd)

docs/kcl/line.md

@@ -9,7 +9,7 @@ Extend the current sketch with a new straight line.
 
 
 ```js
-line(sketch: Sketch, endAbsolute?: [number], end?: [number], tag?: TagDeclarator) -> Sketch
+line(sketch: Sketch, end_absolute?: [number], end?: [number], tag?: TagDeclarator) -> Sketch
 ```
 
 
@@ -18,7 +18,7 @@ line(sketch: Sketch, endAbsolute?: [number], end?: [number], tag?: TagDeclarator
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | Which sketch should this path be added to? | Yes |
-| `endAbsolute` | `[number]` | Which absolute point should this line go to? Incompatible with `end`. | No |
+| `end_absolute` | `[number]` | Which absolute point should this line go to? Incompatible with `end`. | No |
 | `end` | `[number]` | How far away (along the X and Y axes) should this line go? Incompatible with `endAbsolute`. | No |
 | `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Create a new tag which refers to this line | No |
 

docs/kcl/map.md

@@ -9,7 +9,7 @@ Apply a function to every element of a list.
 Given a list like `[a, b, c]`, and a function like `f`, returns `[f(a), f(b), f(c)]`
 
 ```js
-map(array: [KclValue], mapFn: FunctionSource) -> [KclValue]
+map(array: [KclValue], map_fn: FunctionParam) -> [KclValue]
 ```
 
 
@@ -18,7 +18,7 @@ map(array: [KclValue], mapFn: FunctionSource) -> [KclValue]
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `array` | [`[KclValue]`](/docs/kcl/types/KclValue) |  | Yes |
-| `mapFn` | `FunctionSource` |  | Yes |
+| `map_fn` | `FunctionParam` |  | Yes |
 
 ### Returns
 

docs/kcl/patternCircular2d.md

@@ -9,7 +9,7 @@ Repeat a 2-dimensional sketch some number of times along a partial or
 complete circle some specified number of times. Each object may additionally be rotated along the circle, ensuring orentation of the solid with respect to the center of the circle is maintained.
 
 ```js
-patternCircular2d(sketchSet: SketchSet, instances: integer, center: [number], arcDegrees: number, rotateDuplicates: bool, useOriginal?: bool) -> [Sketch]
+patternCircular2d(sketch_set: SketchSet, instances: integer, center: [number], arc_degrees: number, rotate_duplicates: bool, use_original?: bool) -> [Sketch]
 ```
 
 
@@ -17,12 +17,12 @@ patternCircular2d(sketchSet: SketchSet, instances: integer, center: [number], ar
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketchSet` | [`SketchSet`](/docs/kcl/types/SketchSet) | Which sketch(es) to pattern | Yes |
+| `sketch_set` | [`SketchSet`](/docs/kcl/types/SketchSet) | Which sketch(es) to pattern | Yes |
 | `instances` | `integer` | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
 | `center` | `[number]` | The center about which to make the pattern. This is a 2D vector. | Yes |
-| `arcDegrees` | `number` | The arc angle (in degrees) to place the repetitions. Must be greater than 0. | Yes |
-| `rotateDuplicates` | `bool` | Whether or not to rotate the duplicates as they are copied. | Yes |
-| `useOriginal` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
+| `arc_degrees` | `number` | The arc angle (in degrees) to place the repetitions. Must be greater than 0. | Yes |
+| `rotate_duplicates` | `bool` | Whether or not to rotate the duplicates as they are copied. | Yes |
+| `use_original` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns
 

docs/kcl/patternLinear3d.md

@@ -9,7 +9,7 @@ Repeat a 3-dimensional solid along a linear path, with a dynamic amount
 of distance between each repetition, some specified number of times.
 
 ```js
-patternLinear3d(solidSet: SolidSet, instances: integer, distance: number, axis: [number], useOriginal?: bool) -> [Solid]
+patternLinear3d(solid_set: SolidSet, instances: integer, distance: number, axis: [number], use_original?: bool) -> [Solid]
 ```
 
 
@@ -17,11 +17,11 @@ patternLinear3d(solidSet: SolidSet, instances: integer, distance: number, axis:
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `solidSet` | [`SolidSet`](/docs/kcl/types/SolidSet) | The solid(s) to duplicate | Yes |
+| `solid_set` | [`SolidSet`](/docs/kcl/types/SolidSet) | The solid(s) to duplicate | Yes |
 | `instances` | `integer` | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
 | `distance` | `number` | Distance between each repetition. Also known as 'spacing'. | Yes |
 | `axis` | `[number]` | The axis of the pattern. A 2D vector. | Yes |
-| `useOriginal` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
+| `use_original` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns
 

docs/kcl/pi.md

@@ -4,11 +4,9 @@ excerpt: "Return the value of `pi`. Archimedes’ constant (π)."
 layout: manual
 ---
 
-**WARNING:** This function is deprecated.
-
 Return the value of `pi`. Archimedes’ constant (π).
 
-**DEPRECATED** use the constant PI
+
 
 ```js
 pi() -> number

docs/kcl/polygon.md

@@ -9,7 +9,7 @@ Create a regular polygon with the specified number of sides that is either inscr
 
 
 ```js
-polygon(data: PolygonData, sketchSurfaceOrGroup: SketchOrSurface, tag?: TagDeclarator) -> Sketch
+polygon(data: PolygonData, sketch_surface_or_group: SketchOrSurface, tag?: TagDeclarator) -> Sketch
 ```
 
 
@@ -18,7 +18,7 @@ polygon(data: PolygonData, sketchSurfaceOrGroup: SketchOrSurface, tag?: TagDecla
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `data` | [`PolygonData`](/docs/kcl/types/PolygonData) | Data for drawing a polygon | Yes |
-| `sketchSurfaceOrGroup` | [`SketchOrSurface`](/docs/kcl/types/SketchOrSurface) | A sketch surface or a sketch. | Yes |
+| `sketch_surface_or_group` | [`SketchOrSurface`](/docs/kcl/types/SketchOrSurface) | A sketch surface or a sketch. | Yes |
 | `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) |  | No |
 
 ### Returns

docs/kcl/reduce.md

@@ -9,7 +9,7 @@ Take a starting value. Then, for each element of an array, calculate the next va
 using the previous value and the element.
 
 ```js
-reduce(array: [KclValue], start: KclValue, reduceFn: FunctionSource) -> KclValue
+reduce(array: [KclValue], start: KclValue, reduce_fn: FunctionParam) -> KclValue
 ```
 
 
@@ -19,7 +19,7 @@ reduce(array: [KclValue], start: KclValue, reduceFn: FunctionSource) -> KclValue
 |----------|------|-------------|----------|
 | `array` | [`[KclValue]`](/docs/kcl/types/KclValue) |  | Yes |
 | `start` | [`KclValue`](/docs/kcl/types/KclValue) | Any KCL value. | Yes |
-| `reduceFn` | `FunctionSource` |  | Yes |
+| `reduce_fn` | `FunctionParam` |  | Yes |
 
 ### Returns
 
@@ -76,7 +76,7 @@ assertEqual(sum, 6, 0.00001, "1 + 2 + 3 summed is 6")
 // Declare a function that sketches a decagon.
 fn decagon(radius) {
   // Each side of the decagon is turned this many degrees from the previous angle.
-  stepAngle = 1 / 10 * TAU
+  stepAngle = 1 / 10 * tau()
 
   // Start the decagon sketch at this point.
   startOfDecagonSketch = startSketchOn('XY')
@@ -97,7 +97,7 @@ fn decagon(radius) {
 
 /* The `decagon` above is basically like this pseudo-code:
 fn decagon(radius):
-    stepAngle = (1/10) * TAU
+    stepAngle = (1/10) * tau()
     plane = startSketchOn('XY')
     startOfDecagonSketch = startProfileAt([(cos(0)*radius), (sin(0) * radius)], plane)
 

docs/kcl/types.md

@@ -266,10 +266,10 @@ myRect = rect([20, 0])
 
 myRect
   |> extrude(10, %)
-  |> fillet(
+  |> fillet({
        radius = 0.5,
        tags = [myRect.tags.rectangleSegmentA001]
-     )
+     }, %)
 ```
 
 See how we use the tag `rectangleSegmentA001` in the `fillet` function outside

docs/kcl/types/BasePath.md

@@ -18,7 +18,6 @@ A base path.
 |----------|------|-------------|----------|
 | `from` |`[number, number]`| The from point. | No |
 | `to` |`[number, number]`| The to point. | No |
-| `units` |[`UnitLen`](/docs/kcl/types/UnitLen)| A unit of length. | No |
 | `tag` |[`TagDeclarator`](/docs/kcl/types#tag-declaration)| The tag of the path. | No |
 | `__geoMeta` |[`GeoMeta`](/docs/kcl/types/GeoMeta)| Metadata. | No |