closer

Signed-off-by: Jess Frazelle <github@jessfraz.com>

.env.development

@@ -3,4 +3,3 @@ VITE_KC_API_BASE_URL=https://api.dev.zoo.dev
 VITE_KC_SITE_BASE_URL=https://dev.zoo.dev
 VITE_KC_SKIP_AUTH=false
 VITE_KC_CONNECTION_TIMEOUT_MS=5000
-VITE_KC_DEV_TOKEN="your token from dev.zoo.dev should go in .env.development.local"

.github/workflows/build-and-store-wasm.yml

@@ -1,33 +0,0 @@
-name: Build and Store WASM
-
-on:
-  push:
-    branches:
-      - main
-
-jobs:
-  build-and-upload:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - uses: actions/setup-node@v4
-        with:
-          node-version-file: '.nvmrc'
-          cache: 'yarn'
-      - name: Install dependencies
-        run: yarn
-      - name: Setup Rust
-        uses: dtolnay/rust-toolchain@stable
-      - name: Cache wasm
-        uses: Swatinem/rust-cache@v2
-        with:
-          workspaces: './src/wasm-lib'
-      - name: build wasm
-        run: yarn build:wasm
-
-
-      # Upload the WASM bundle as an artifact
-      - uses: actions/upload-artifact@v3
-        with:
-          name: wasm-bundle
-          path: src/wasm-lib/pkg

.github/workflows/cargo-clippy.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-latest
     strategy:
       matrix:
-        dir: ['src/wasm-lib', 'src-tauri']
+        dir: ['src/wasm-lib']
     steps:
       - uses: actions/checkout@v4
       - name: Install latest rust
@@ -31,22 +31,9 @@ jobs:
 
       - name: install dependencies
         if: matrix.dir ==  'src-tauri'
-        shell: bash
         run: |
           sudo apt-get update
-          sudo apt-get install -y \
+          sudo apt-get install -y libgtk-3-dev libwebkit2gtk-4.0-dev libappindicator3-dev librsvg2-dev patchelf
-            libgtk-3-dev \
-            libayatana-appindicator3-dev \
-            webkit2gtk-driver \
-            libsoup-3.0-dev \
-            libjavascriptcoregtk-4.1-dev \
-            libwebkit2gtk-4.1-dev \
-            at-spi2-core \
-            xvfb
-          yarn install
-          yarn build:wasm
-          yarn build:local
-
       - name: Rust Cache
         uses: Swatinem/rust-cache@v2.6.1
 

.github/workflows/cargo-test-tauri.yml

@@ -1,57 +0,0 @@
-on:
-  push:
-    branches:
-      - main
-    paths:
-      - 'src-tauri/**.rs'
-      - '**/Cargo.toml'
-      - '**/Cargo.lock'
-      - '**/rust-toolchain.toml'
-      - .github/workflows/cargo-test-tauri.yml
-  pull_request:
-    paths:
-      - 'src-tauri/**.rs'
-      - '**/Cargo.toml'
-      - '**/Cargo.lock'
-      - '**/rust-toolchain.toml'
-      - .github/workflows/cargo-test-tauri.yml
-  workflow_dispatch:
-permissions: read-all
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-name: cargo test of tauri
-jobs:
-  cargotest:
-    name: cargo test
-    runs-on: ubuntu-latest-8-cores
-    strategy:
-      matrix:
-        dir: ['src-tauri']
-    steps:
-      - uses: actions/checkout@v4
-      - name: Install latest rust
-        uses: actions-rs/toolchain@v1
-        with:
-          toolchain: stable
-          override: true
-      - name: install dependencies
-        if: matrix.dir ==  'src-tauri'
-        run: |
-          sudo apt-get update
-          sudo apt-get install -y \
-            libgtk-3-dev \
-            libayatana-appindicator3-dev \
-            webkit2gtk-driver \
-            libsoup-3.0-dev \
-            libjavascriptcoregtk-4.1-dev \
-            libwebkit2gtk-4.1-dev \
-            at-spi2-core \
-            xvfb
-      - name: Rust Cache
-        uses: Swatinem/rust-cache@v2.6.1
-      - name: cargo test
-        shell: bash
-        run: |-
-          cd "${{ matrix.dir }}"
-          cargo test --all

.github/workflows/ci.yml

@@ -13,7 +13,7 @@ on:
   # Will checkout the last commit from the default branch (main as of 2023-10-04)
 
 env:
-  BUILD_RELEASE: ${{ github.event_name == 'release' || github.event_name == 'schedule' || github.event_name == 'pull_request' && (contains(github.event.pull_request.title, 'Cut release v')) }}
+  BUILD_RELEASE: ${{ github.event_name == 'release' || github.event_name == 'schedule' || github.event_name == 'pull_request' && contains(github.event.pull_request.title, 'Cut release v') }}
 
 concurrency:
   group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
@@ -130,9 +130,7 @@ jobs:
       matrix:
         os: [macos-14, ubuntu-latest, windows-latest]
     env:
-      # Specific Apple Universal target for macos
       TAURI_ARGS_MACOS: ${{ matrix.os == 'macos-14' && '--target universal-apple-darwin' || '' }}
-      # Only build executable on linux (no appimage or deb)
       TAURI_ARGS_UBUNTU: ${{ matrix.os == 'ubuntu-latest' && '--bundles' || '' }}
     steps:
       - uses: actions/checkout@v4
@@ -149,17 +147,17 @@ jobs:
 
       - name: Install ubuntu system dependencies
         if: matrix.os == 'ubuntu-latest'
-        run: |
+        run: >
-          sudo apt-get update
+          sudo apt-get update &&
-          sudo apt-get install -y \
+          sudo apt-get install -y
-            libgtk-3-dev \
+          libgtk-3-dev
-            libayatana-appindicator3-dev \
+          libayatana-appindicator3-dev
-            webkit2gtk-driver \
+          webkit2gtk-driver
-            libsoup-3.0-dev \
+          libsoup-3.0-dev
-            libjavascriptcoregtk-4.1-dev \
+          libjavascriptcoregtk-4.1-dev
-            libwebkit2gtk-4.1-dev \
+          libwebkit2gtk-4.1-dev
-            at-spi2-core \
+          at-spi2-core
-            xvfb
+          xvfb
 
       - name: Sync node version and setup cache
         uses: actions/setup-node@v4
@@ -239,96 +237,6 @@ jobs:
           includeDebug: true
           args: "${{ env.TAURI_ARGS_MACOS }} ${{ env.TAURI_ARGS_UBUNTU }}"
 
-      - name: Build for Mac TestFlight (nightly)
-        if: ${{ github.event_name == 'schedule' && matrix.os == 'macos-14' }}
-        shell: bash
-        run: |
-          unset APPLE_SIGNING_IDENTITY
-          unset APPLE_CERTIFICATE
-          sign_app="3rd Party Mac Developer Application: KittyCAD Inc (${APPLE_TEAM_ID})"
-          sign_install="3rd Party Mac Developer Installer: KittyCAD Inc (${APPLE_TEAM_ID})"
-          profile="src-tauri/entitlements/Mac_App_Distribution.provisionprofile"
-
-          mkdir -p src-tauri/entitlements
-          echo -n "${APPLE_STORE_PROVISIONING_PROFILE}" | base64 --decode -o "${profile}"
-
-          echo -n "${APPLE_STORE_DISTRIBUTION_CERT}" | base64 --decode -o "dist.cer"
-          echo -n "${APPLE_STORE_INSTALLER_CERT}" | base64 --decode -o "installer.cer"
-
-          KEYCHAIN_PATH=$RUNNER_TEMP/app-signing.keychain-db
-          KEYCHAIN_PASSWORD="password"
-
-          # create temporary keychain
-          security create-keychain -p "$KEYCHAIN_PASSWORD" $KEYCHAIN_PATH
-          security set-keychain-settings -lut 21600 $KEYCHAIN_PATH
-          security unlock-keychain -p "$KEYCHAIN_PASSWORD" $KEYCHAIN_PATH
-
-          # import certificate to keychain
-          security import "dist.cer" -P "$APPLE_STORE_P12_PASSWORD" -k $KEYCHAIN_PATH -f pkcs12 -t cert -A
-          security import "installer.cer" -P "$APPLE_STORE_P12_PASSWORD" -k $KEYCHAIN_PATH -f pkcs12 -t cert -A
-
-          security set-key-partition-list -S apple-tool:,apple: -k "$KEYCHAIN_PASSWORD" $KEYCHAIN_PATH
-          security list-keychain -d user -s $KEYCHAIN_PATH
-
-          target="universal-apple-darwin"
-
-          # Turn off the default target
-          # We don't want to install the updater for the apple store build
-          sed -i.bu "s/default =/# default =/" src-tauri/Cargo.toml
-          rm src-tauri/Cargo.toml.bu
-          git diff src-tauri/Cargo.toml
-
-          yarn tauri build --target "${target}" --verbose --config src-tauri/tauri.app-store.conf.json
-
-          app_path="src-tauri/target/${target}/release/bundle/macos/Zoo Modeling App.app"
-          build_name="src-tauri/target/${target}/release/bundle/macos/Zoo Modeling App.pkg"
-          cp_dir="src-tauri/target/${target}/release/bundle/macos/Zoo Modeling App.app/Contents/embedded.provisionprofile"
-          entitlements="src-tauri/entitlements/app-store.entitlements"
-
-          cp "${profile}" "${cp_dir}"
-
-          codesign --deep --force -s "${sign_app}" --entitlements "${entitlements}" "${app_path}"
-
-          productbuild --component "${app_path}" /Applications/ --sign "${sign_install}" "${build_name}"
-
-          # Undo the changes to the Cargo.toml
-          git checkout src-tauri/Cargo.toml
-
-        env:
-          APPLE_TEAM_ID: ${{ secrets.APPLE_TEAM_ID }}
-          APPLE_STORE_PROVISIONING_PROFILE: ${{ secrets.APPLE_STORE_PROVISIONING_PROFILE }}
-          APPLE_STORE_DISTRIBUTION_CERT: ${{ secrets.APPLE_STORE_DISTRIBUTION_CERT }}
-          APPLE_STORE_INSTALLER_CERT: ${{ secrets.APPLE_STORE_INSTALLER_CERT }}
-          APPLE_STORE_P12_PASSWORD: ${{ secrets.APPLE_STORE_P12_PASSWORD }}
-
-
-      - name: 'Upload to Mac TestFlight (nightly)'
-        uses: apple-actions/upload-testflight-build@v1
-        if: ${{ github.event_name == 'schedule' && matrix.os == 'macos-14' }}
-        with:
-          app-path: 'src-tauri/target/universal-apple-darwin/release/bundle/macos/Zoo Modeling App.pkg'
-          issuer-id: ${{ secrets.APPLE_STORE_ISSUER_ID }}
-          api-key-id: ${{ secrets.APPLE_STORE_API_KEY_ID }}
-          api-private-key: ${{ secrets.APPLE_STORE_API_PRIVATE_KEY }}
-          app-type: osx
-
-
-      - name: Clean up after Mac TestFlight (nightly)
-        if: ${{ github.event_name == 'schedule' && matrix.os == 'macos-14' }}
-        shell: bash
-        run: |
-          git status
-          # remove our target builds because we want to make sure the later build
-          # includes the updater, and that anything we changed with the target
-          # does not persist
-          rm -rf src-tauri/target
-          # Lets get rid of the info.plist for the normal mac builds since its
-          # being sketchy.
-          rm src-tauri/Info.plist
-
-      # We do this after the apple store because the apple store build is
-      # specific and we want to overwrite it with the this new build after and
-      # not upload the apple store build to the public bucket
       - name: Build the app (release) and sign
         uses: tauri-apps/tauri-action@v0
         if: ${{ env.BUILD_RELEASE == 'true' }}
@@ -353,10 +261,11 @@ jobs:
         with:
           path: "${{ env.PREFIX }}/${{ env.MODE }}/bundle/*/*"
 
+      # TODO: re-enable linux e2e tests when possible
       - name: Run e2e tests (linux only)
-        if: ${{ matrix.os == 'ubuntu-latest' && github.event_name != 'release' && github.event_name != 'schedule' }}
+        if: false
         run: |
-          cargo install tauri-driver --force
+          cargo install tauri-driver
           source .env.${{ env.BUILD_RELEASE == 'true' && 'production' || 'development' }}
           export VITE_KC_API_BASE_URL
           xvfb-run yarn test:e2e:tauri
@@ -440,7 +349,7 @@ jobs:
             cat last_download.json
 
       - name: Authenticate to Google Cloud
-        uses: 'google-github-actions/auth@v2.1.3'
+        uses: 'google-github-actions/auth@v2.1.2'
         with:
           credentials_json: '${{ secrets.GOOGLE_CLOUD_DL_SA }}'
 

.github/workflows/create-release.yml

@@ -1,37 +0,0 @@
-name: Create Release
-
-on:
-  push:
-    branches:
-      - main
-
-jobs:
-  create-release:
-    runs-on: ubuntu-latest
-    permissions:
-      contents: write
-      pull-requests: read
-    if: contains(github.event.head_commit.message, 'Cut release v')
-    steps:
-      - uses: actions/github-script@v7
-        name: Read Cut release PR info and create release
-        with:
-          script: |
-            const { owner, repo } = context.repo
-            const pulls = await github.rest.repos.listPullRequestsAssociatedWithCommit({
-              owner,
-              repo,
-              commit_sha: context.sha,
-            })
-            const { title, body } = pulls.data[0]
-            const version = title.split('Cut release ')[1]
-
-            const result = await github.rest.repos.createRelease({
-              owner,
-              repo,
-              body,
-              tag_name: version,
-              name: version,
-              draft: true,
-            })
-            console.log(result)

.github/workflows/playwright.yml

@@ -12,31 +12,11 @@ concurrency:
 permissions:
   contents: write
   pull-requests: write
-  actions: read
-  
 
 jobs:
-
-  check-rust-changes:
-    runs-on: ubuntu-latest
-    outputs:
-      rust-changed: ${{ steps.filter.outputs.rust }}
-
-    steps:
-      - uses: actions/checkout@v4
-
-      - id: filter
-        name: Check for Rust changes
-        uses: dorny/paths-filter@v3
-        with:
-          filters: |
-            rust:
-              - 'src/wasm-lib/**'
-
   playwright-ubuntu:
     timeout-minutes: 60
     runs-on: ubuntu-latest-8-cores
-    needs: check-rust-changes
     steps:
     - uses: actions/checkout@v4
     - uses: actions/setup-node@v4
@@ -48,38 +28,13 @@ jobs:
       run: yarn
     - name: Install Playwright Browsers
       run: yarn playwright install --with-deps
-    - name: Download Wasm Cache
-      id: download-wasm
-      if: needs.check-rust-changes.outputs.rust-changed == 'false'
-      uses: dawidd6/action-download-artifact@v3
-      continue-on-error: true
-      with:
-        github_token: ${{secrets.GITHUB_TOKEN}}
-        name: wasm-bundle
-        workflow: build-and-store-wasm.yml
-        branch: main
-        path: src/wasm-lib/pkg
-    - name: copy wasm blob
-      if: needs.check-rust-changes.outputs.rust-changed == 'false'
-      run: cp src/wasm-lib/pkg/wasm_lib_bg.wasm public
-      continue-on-error: true
     - name: Setup Rust
       uses: dtolnay/rust-toolchain@stable
-    - name: Cache Wasm (because rust diff)
+    - name: Cache wasm
-      if: needs.check-rust-changes.outputs.rust-changed == 'true'
       uses: Swatinem/rust-cache@v2
       with:
         workspaces: './src/wasm-lib'
-    - name: OR Cache Wasm (because wasm cache failed)
+    - name: build wasm
-      if: steps.download-wasm.outcome == 'failure'
-      uses: Swatinem/rust-cache@v2
-      with:
-        workspaces: './src/wasm-lib'
-    - name: Build Wasm (because rust diff)
-      if: needs.check-rust-changes.outputs.rust-changed == 'true'
-      run: yarn build:wasm
-    - name: OR Build Wasm (because wasm cache failed)
-      if: steps.download-wasm.outcome == 'failure'
       run: yarn build:wasm
     - name: build web
       run: yarn build:local
@@ -134,7 +89,6 @@ jobs:
   playwright-macos:
     timeout-minutes: 60
     runs-on: macos-14
-    needs: check-rust-changes
     steps:
     - uses: actions/checkout@v4
     - uses: actions/setup-node@v4
@@ -145,38 +99,13 @@ jobs:
       run: yarn
     - name: Install Playwright Browsers
       run: yarn playwright install --with-deps
-    - name: Download Wasm Cache
-      id: download-wasm
-      if: needs.check-rust-changes.outputs.rust-changed == 'false'
-      uses: dawidd6/action-download-artifact@v3
-      continue-on-error: true
-      with:
-        github_token: ${{secrets.GITHUB_TOKEN}}
-        name: wasm-bundle
-        workflow: build-and-store-wasm.yml
-        branch: main
-        path: src/wasm-lib/pkg
-    - name: copy wasm blob
-      if: needs.check-rust-changes.outputs.rust-changed == 'false'
-      run: cp src/wasm-lib/pkg/wasm_lib_bg.wasm public
-      continue-on-error: true
     - name: Setup Rust
       uses: dtolnay/rust-toolchain@stable
-    - name: Cache Wasm (because rust diff)
+    - name: Cache wasm
-      if: needs.check-rust-changes.outputs.rust-changed == 'true'
       uses: Swatinem/rust-cache@v2
       with:
         workspaces: './src/wasm-lib'
-    - name: OR Cache Wasm (because wasm cache failed)
+    - name: build wasm
-      if: steps.download-wasm.outcome == 'failure'
-      uses: Swatinem/rust-cache@v2
-      with:
-        workspaces: './src/wasm-lib'
-    - name: Build Wasm (because rust diff)
-      if: needs.check-rust-changes.outputs.rust-changed == 'true'
-      run: yarn build:wasm
-    - name: OR Build Wasm (because wasm cache failed)
-      if: steps.download-wasm.outcome == 'failure'
       run: yarn build:wasm
     - name: build web
       run: yarn build:local

.gitignore

@@ -54,4 +54,3 @@ src/**/*.typegen.ts
 src-tauri/gen
 
 src/wasm-lib/grackle/stdlib_cube_partial.json
-Mac_App_Distribution.provisionprofile

.nvmrc

@@ -1 +1 @@
-v21.7.1
+v20.5.0

README.md

@@ -59,10 +59,6 @@ followed by:
 ```
 yarn build:wasm-dev
 ```
-or if you have the gh cli installed
-```
-./get-latest-wasm-bundle.sh # this will download the latest main wasm bundle
-```
 
 That will build the WASM binary and put in the `public` dir (though gitignored)
 
@@ -72,13 +68,7 @@ finally, to run the web app only, run:
 yarn start
 ```
 
-If you're not an KittyCAD employee you won't be able to access the dev environment, you should copy everything from `.env.production` to `.env.development` to make it point to production instead, then when you navigate to `localhost:3000` the easiest way to sign in is to paste `localStorage.setItem('TOKEN_PERSIST_KEY', "your-token-from-https://zoo.dev/account/api-tokens")` replacing the with a real token from https://zoo.dev/account/api-tokens ofcourse, then navigate to localhost:3000 again. Note that navigating to localhost:3000/signin removes your token so you will need to set the token again.
+## Developing in Chrome
-
-### Development environment variables
-
-The Copilot LSP plugin in the editor requires a Zoo API token to run. In production, we authenticate this with a token via cookie in the browser and device auth token in the desktop environment, but this token is inaccessible in the dev browser version because the cookie is considered "cross-site" (from `localhost` to `dev.zoo.dev`). There is an optional environment variable called `VITE_KC_DEV_TOKEN` that you can populate with a dev token in a `.env.development.local` file to not check it into Git, which will use that token instead of other methods for the LSP service.
-
-### Developing in Chrome
 
 Chrome is in the process of rolling out a new default which
 [blocks Third-Party Cookies](https://developer.chrome.com/en/docs/privacy-sandbox/third-party-cookie-phase-out/).

babel.config.js

@@ -1,3 +1,3 @@
 module.exports = {
-  presets: ['@babel/preset-env'],
+  presets: ["@babel/preset-env"],
 }

docs/kcl/index.md

@@ -31,6 +31,7 @@ layout: manual
 * [`fillet`](kcl/fillet)
 * [`floor`](kcl/floor)
 * [`getEdge`](kcl/getEdge)
+* [`getExtrudeWallTransform`](kcl/getExtrudeWallTransform)
 * [`getNextAdjacentEdge`](kcl/getNextAdjacentEdge)
 * [`getOppositeEdge`](kcl/getOppositeEdge)
 * [`getPreviousAdjacentEdge`](kcl/getPreviousAdjacentEdge)

e2e/playwright/flow-tests.spec.ts

@@ -1,5 +1,5 @@
 import { test, expect } from '@playwright/test'
-import { makeTemplate, getUtils } from './test-utils'
+import { getUtils } from './test-utils'
 import waitOn from 'wait-on'
 import { roundOff } from 'lib/utils'
 import { SaveSettingsPayload } from 'lib/settings/settingsTypes'
@@ -8,11 +8,9 @@ import {
   TEST_SETTINGS,
   TEST_SETTINGS_KEY,
   TEST_SETTINGS_CORRUPTED,
-  TEST_SETTINGS_ONBOARDING_EXPORT,
+  TEST_SETTINGS_ONBOARDING,
-  TEST_SETTINGS_ONBOARDING_START,
 } from './storageStates'
 import * as TOML from '@iarna/toml'
-import { Coords2d } from 'lang/std/sketch'
 
 /*
 debug helper: unfortunately we do rely on exact coord mouse clicks in a few places
@@ -106,7 +104,6 @@ test('Basic sketch', async ({ page }) => {
   |> startProfileAt(${commonPoints.startAt}, %)
   |> line([${commonPoints.num1}, 0], %)
   |> line([0, ${commonPoints.num1}], %)`)
-  await page.waitForTimeout(100)
   await page.mouse.click(startXPx, 500 - PUR * 20)
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
@@ -131,7 +128,6 @@ test('Basic sketch', async ({ page }) => {
   // selected two lines therefore there should be two cursors
   await expect(page.locator('.cm-cursor')).toHaveCount(2)
 
-  await page.getByRole('button', { name: 'Constrain' }).click()
   await page.getByRole('button', { name: 'Equal Length' }).click()
 
   await expect(page.locator('.cm-content'))
@@ -265,88 +261,6 @@ test('Can moving camera', async ({ page, context }) => {
   }, [1, -94, -94])
 })
 
-test('if you click the format button it formats your code', async ({
-  page,
-}) => {
-  const u = getUtils(page)
-  await page.setViewportSize({ width: 1000, height: 500 })
-  await page.goto('/')
-
-  await u.waitForAuthSkipAppStart()
-
-  // check no error to begin with
-  await expect(page.locator('.cm-lint-marker-error')).not.toBeVisible()
-
-  await page.click('.cm-content')
-  await page.keyboard.type(`const part001 = startSketchOn('XY')
-|> startProfileAt([-10, -10], %)
-|> line([20, 0], %)
-|> line([0, 20], %)
-|> line([-20, 0], %)
-|> close(%)`)
-  await page.click('#code-pane button:first-child')
-  await page.click('button:has-text("Format code")')
-
-  await expect(page.locator('.cm-content'))
-    .toHaveText(`const part001 = startSketchOn('XY')
-  |> startProfileAt([-10, -10], %)
-  |> line([20, 0], %)
-  |> line([0, 20], %)
-  |> line([-20, 0], %)
-  |> close(%)`)
-})
-
-test('if you use the format keyboard binding it formats your code', async ({
-  page,
-}) => {
-  const u = getUtils(page)
-  await page.addInitScript(async () => {
-    localStorage.setItem(
-      'persistCode',
-      `const part001 = startSketchOn('XY')
-|> startProfileAt([-10, -10], %)
-|> line([20, 0], %)
-|> line([0, 20], %)
-|> line([-20, 0], %)
-|> close(%)`
-    )
-  })
-  await page.setViewportSize({ width: 1000, height: 500 })
-  const lspStartPromise = page.waitForEvent('console', async (message) => {
-    // it would be better to wait for a message that the kcl lsp has started by looking for the message  message.text().includes('[lsp] [window/logMessage]')
-    // but that doesn't seem to make it to the console for macos/safari :(
-    if (message.text().includes('start kcl lsp')) {
-      await new Promise((resolve) => setTimeout(resolve, 200))
-      return true
-    }
-    return false
-  })
-  await page.goto('/')
-  await u.waitForAuthSkipAppStart()
-  await lspStartPromise
-
-  // check no error to begin with
-  await expect(page.locator('.cm-lint-marker-error')).not.toBeVisible()
-
-  await u.openDebugPanel()
-  await u.expectCmdLog('[data-message-type="execution-done"]')
-  await u.closeDebugPanel()
-
-  // focus the editor
-  await page.click('.cm-line')
-
-  // Hit alt+shift+f to format the code
-  await page.keyboard.press('Alt+Shift+KeyF')
-
-  await expect(page.locator('.cm-content'))
-    .toHaveText(`const part001 = startSketchOn('XY')
-  |> startProfileAt([-10, -10], %)
-  |> line([20, 0], %)
-  |> line([0, 20], %)
-  |> line([-20, 0], %)
-  |> close(%)`)
-})
-
 test('if you write invalid kcl you get inlined errors', async ({ page }) => {
   const u = getUtils(page)
   await page.setViewportSize({ width: 1000, height: 500 })
@@ -363,7 +277,7 @@ test('if you write invalid kcl you get inlined errors', async ({ page }) => {
     const bottomAng = 25
    */
   await page.click('.cm-content')
-  await page.keyboard.type('$ error')
+  await page.keyboard.type('# error')
 
   // press arrows to clear autocomplete
   await page.keyboard.press('ArrowLeft')
@@ -380,10 +294,10 @@ test('if you write invalid kcl you get inlined errors', async ({ page }) => {
 
   // error text on hover
   await page.hover('.cm-lint-marker-error')
-  await expect(page.getByText("found unknown token '$'")).toBeVisible()
+  await expect(page.getByText("found unknown token '#'")).toBeVisible()
 
   // select the line that's causing the error and delete it
-  await page.getByText('$ error').click()
+  await page.getByText('# error').click()
   await page.keyboard.press('End')
   await page.keyboard.down('Shift')
   await page.keyboard.press('Home')
@@ -414,7 +328,9 @@ test('if you write invalid kcl you get inlined errors', async ({ page }) => {
   await expect(page.locator('.cm-lint-marker-error')).not.toBeVisible()
 })
 
-test('if your kcl gets an error from the engine it is inlined', async ({
+/* Ignore this test for now since its causing engine to crash
+ *
+ * test('if your kcl gets an error from the engine it is inlined', async ({
   page,
 }) => {
   const u = getUtils(page)
@@ -433,7 +349,7 @@ const sketch001 = startSketchOn(box, "revolveAxis")
 |> startProfileAt([5, 10], %)
 |> line([0, -10], %)
 |> line([2, 0], %)
-|> line([0, -10], %)
+|> line([0, 10], %)
 |> close(%)
 |> revolve({
 axis: getEdge('revolveAxis', box),
@@ -448,7 +364,7 @@ angle: 90
 
   await u.waitForAuthSkipAppStart()
 
-  await u.openDebugPanel()
+  u.openDebugPanel()
   await u.expectCmdLog('[data-message-type="execution-done"]')
   await u.closeDebugPanel()
 
@@ -462,7 +378,7 @@ angle: 90
       'sketch profile must lie entirely on one side of the revolution axis'
     )
   ).toBeVisible()
-})
+})*/
 
 test('executes on load', async ({ page }) => {
   const u = getUtils(page)
@@ -650,9 +566,7 @@ test('Auto complete works', async ({ page }) => {
 
   await page.keyboard.press('Tab')
   await page.keyboard.type('12')
-  await page.waitForTimeout(100)
   await page.keyboard.press('Tab')
-  await page.waitForTimeout(100)
   await page.keyboard.press('Tab')
   await page.keyboard.press('Tab')
   await page.keyboard.press('Enter')
@@ -681,12 +595,13 @@ test('Auto complete works', async ({ page }) => {
 
 test('Stored settings are validated and fall back to defaults', async ({
   page,
+  context,
 }) => {
   const u = getUtils(page)
 
   // Override beforeEach test setup
   // with corrupted settings
-  await page.addInitScript(
+  await context.addInitScript(
     async ({ settingsKey, settings }) => {
       localStorage.setItem(settingsKey, settings)
     },
@@ -703,18 +618,18 @@ test('Stored settings are validated and fall back to defaults', async ({
   // Check the settings were reset
   const storedSettings = TOML.parse(
     await page.evaluate(
-      ({ settingsKey }) => localStorage.getItem(settingsKey) || '',
+      ({ settingsKey }) => localStorage.getItem(settingsKey) || '{}',
       { settingsKey: TEST_SETTINGS_KEY }
     )
   ) as { settings: SaveSettingsPayload }
 
-  expect(storedSettings.settings?.app?.theme).toBe(undefined)
+  expect(storedSettings.settings.app?.theme).toBe('dark')
 
   // Check that the invalid settings were removed
-  expect(storedSettings.settings?.modeling?.defaultUnit).toBe(undefined)
+  expect(storedSettings.settings.modeling?.defaultUnit).toBe(undefined)
-  expect(storedSettings.settings?.modeling?.mouseControls).toBe(undefined)
+  expect(storedSettings.settings.modeling?.mouseControls).toBe(undefined)
-  expect(storedSettings.settings?.app?.projectDirectory).toBe(undefined)
+  expect(storedSettings.settings.app?.projectDirectory).toBe(undefined)
-  expect(storedSettings.settings?.projects?.defaultProjectName).toBe(undefined)
+  expect(storedSettings.settings.projects?.defaultProjectName).toBe(undefined)
 })
 
 test('Project settings can be set and override user settings', async ({
@@ -765,45 +680,6 @@ test('Project settings can be set and override user settings', async ({
   await expect(page.locator('select[name="app-theme"]')).toHaveValue('light')
 })
 
-test('Click through each onboarding step', async ({ page }) => {
-  const u = getUtils(page)
-
-  // Override beforeEach test setup
-  await page.addInitScript(
-    async ({ settingsKey, settings }) => {
-      // Give no initial code, so that the onboarding start is shown immediately
-      localStorage.setItem('persistCode', '')
-      localStorage.setItem(settingsKey, settings)
-    },
-    {
-      settingsKey: TEST_SETTINGS_KEY,
-      settings: TOML.stringify({ settings: TEST_SETTINGS_ONBOARDING_START }),
-    }
-  )
-
-  await page.setViewportSize({ width: 1200, height: 1080 })
-  await page.goto('/')
-  await u.waitForAuthSkipAppStart()
-
-  // Test that the onboarding pane loaded
-  await expect(page.getByText('Welcome to Modeling App! This')).toBeVisible()
-
-  const nextButton = page.getByTestId('onboarding-next')
-
-  while ((await nextButton.innerText()) !== 'Finish') {
-    await expect(nextButton).toBeVisible()
-    await nextButton.click()
-  }
-
-  // Finish the onboarding
-  await expect(nextButton).toBeVisible()
-  await nextButton.click()
-
-  // Test that the onboarding pane is gone
-  await expect(page.getByTestId('onboarding-content')).not.toBeVisible()
-  await expect(page.url()).not.toContain('onboarding')
-})
-
 test('Onboarding redirects and code updating', async ({ page }) => {
   const u = getUtils(page)
 
@@ -816,7 +692,7 @@ test('Onboarding redirects and code updating', async ({ page }) => {
     },
     {
       settingsKey: TEST_SETTINGS_KEY,
-      settings: TOML.stringify({ settings: TEST_SETTINGS_ONBOARDING_EXPORT }),
+      settings: TOML.stringify({ settings: TEST_SETTINGS_ONBOARDING }),
     }
   )
 
@@ -860,7 +736,7 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
   await u.openDebugPanel()
 
   const xAxisClick = () =>
-    page.mouse.click(700, 253).then(() => page.waitForTimeout(100))
+    page.mouse.click(700, 250).then(() => page.waitForTimeout(100))
   const emptySpaceClick = () =>
     page.mouse.click(728, 343).then(() => page.waitForTimeout(100))
   const topHorzSegmentClick = () =>
@@ -885,7 +761,6 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${commonPoints.startAt}, %)`)
 
-  await page.waitForTimeout(100)
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
 
   await expect(page.locator('.cm-content'))
@@ -893,14 +768,12 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
   |> startProfileAt(${commonPoints.startAt}, %)
   |> line([${commonPoints.num1}, 0], %)`)
 
-  await page.waitForTimeout(100)
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 20)
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
   |> startProfileAt(${commonPoints.startAt}, %)
   |> line([${commonPoints.num1}, 0], %)
   |> line([0, ${commonPoints.num1}], %)`)
-  await page.waitForTimeout(100)
   await page.mouse.click(startXPx, 500 - PUR * 20)
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
@@ -913,14 +786,10 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
   await page.getByRole('button', { name: 'Line' }).click()
 
   await u.closeDebugPanel()
-  const selectionSequence = async (isSecondTime = false) => {
+  const selectionSequence = async () => {
     await expect(page.getByTestId('hover-highlight')).not.toBeVisible()
 
-    await page.waitForTimeout(100)
+    await page.mouse.move(startXPx + PUR * 15, 500 - PUR * 10)
-    await page.mouse.move(
-      startXPx + PUR * 15,
-      isSecondTime ? 430 : 500 - PUR * 10
-    )
 
     await expect(page.getByTestId('hover-highlight')).toBeVisible()
     // bg-yellow-200 is more brittle than hover-highlight, but is closer to the user experience
@@ -930,10 +799,7 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
     // check mousing off, than mousing onto another line
     await page.mouse.move(startXPx + PUR * 10, 500 - PUR * 15) // mouse off
     await expect(page.getByTestId('hover-highlight')).not.toBeVisible()
-    await page.mouse.move(
+    await page.mouse.move(startXPx + PUR * 10, 500 - PUR * 20) // mouse onto another line
-      startXPx + PUR * 10,
-      isSecondTime ? 295 : 500 - PUR * 20
-    ) // mouse onto another line
     await expect(page.getByTestId('hover-highlight')).toBeVisible()
 
     // now check clicking works including axis
@@ -941,31 +807,23 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
     // click a segment hold shift and click an axis, see that a relevant constraint is enabled
     await topHorzSegmentClick()
     await page.keyboard.down('Shift')
-    const constrainButton = page.getByRole('button', { name: 'Constrain' })
     const absYButton = page.getByRole('button', { name: 'ABS Y' })
-    await constrainButton.click()
     await expect(absYButton).toBeDisabled()
-    await page.waitForTimeout(100)
     await xAxisClick()
     await page.keyboard.up('Shift')
-    await constrainButton.click()
     await absYButton.and(page.locator(':not([disabled])')).waitFor()
     await expect(absYButton).not.toBeDisabled()
 
     // clear selection by clicking on nothing
     await emptySpaceClick()
 
-    await page.waitForTimeout(100)
     // same selection but click the axis first
     await xAxisClick()
-    await constrainButton.click()
     await expect(absYButton).toBeDisabled()
     await page.keyboard.down('Shift')
-    await page.waitForTimeout(100)
     await topHorzSegmentClick()
 
     await page.keyboard.up('Shift')
-    await constrainButton.click()
     await expect(absYButton).not.toBeDisabled()
 
     // clear selection by clicking on nothing
@@ -974,12 +832,9 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
     // check the same selection again by putting cursor in code first then selecting axis
     await page.getByText(`  |> line([-${commonPoints.num2}, 0], %)`).click()
     await page.keyboard.down('Shift')
-    await constrainButton.click()
     await expect(absYButton).toBeDisabled()
-    await page.waitForTimeout(100)
     await xAxisClick()
     await page.keyboard.up('Shift')
-    await constrainButton.click()
     await expect(absYButton).not.toBeDisabled()
 
     // clear selection by clicking on nothing
@@ -1020,16 +875,11 @@ test('Selections work on fresh and edited sketch', async ({ page }) => {
   await page.waitForTimeout(100)
 
   // enter sketch again
-  await u.doAndWaitForCmd(
+  await page.getByRole('button', { name: 'Edit Sketch' }).click()
-    () => page.getByRole('button', { name: 'Edit Sketch' }).click(),
-    'default_camera_get_settings'
-  )
-  await page.waitForTimeout(150)
-
   await page.waitForTimeout(300) // wait for animation
 
   // hover again and check it works
-  await selectionSequence(true)
+  await selectionSequence()
 })
 
 test.describe('Command bar tests', () => {
@@ -1041,8 +891,9 @@ test.describe('Command bar tests', () => {
     let cmdSearchBar = page.getByPlaceholder('Search commands')
 
     // First try opening the command bar and closing it
+    // It has a different label on mac and windows/linux, "Meta+K" and "Ctrl+/" respectively
     await page
-      .getByRole('button', { name: 'Commands', exact: false })
+      .getByRole('button', { name: 'Ctrl+/' })
       .or(page.getByRole('button', { name: '⌘K' }))
       .click()
     await expect(cmdSearchBar).toBeVisible()
@@ -1087,13 +938,13 @@ test.describe('Command bar tests', () => {
       localStorage.setItem(
         'persistCode',
         `const distance = sqrt(20)
-      const part001 = startSketchOn('-XZ')
+        const part001 = startSketchOn('-XZ')
-      |> startProfileAt([-6.95, 10.98], %)
+  |> startProfileAt([-6.95, 4.98], %)
-      |> line([25.1, 0.41], %)
+  |> line([25.1, 0.41], %)
-      |> line([0.73, -20.93], %)
+  |> line([0.73, -14.93], %)
-      |> line([-23.44, 0.52], %)
+  |> line([-23.44, 0.52], %)
-      |> close(%)
+  |> close(%)
-          `
+        `
       )
     })
 
@@ -1110,6 +961,7 @@ test.describe('Command bar tests', () => {
       page.getByRole('button', { name: 'Start Sketch' })
     ).not.toBeDisabled()
     await u.clearCommandLogs()
+    await page.getByText('|> line([0.73, -14.93], %)').click()
     await page.getByRole('button', { name: 'Extrude' }).isEnabled()
 
     let cmdSearchBar = page.getByPlaceholder('Search commands')
@@ -1119,12 +971,6 @@ test.describe('Command bar tests', () => {
     // Search for extrude command and choose it
     await page.getByRole('option', { name: 'Extrude' }).click()
 
-    // Assert that we're on the selection step
-    await expect(page.getByRole('button', { name: 'selection' })).toBeDisabled()
-    // Select a face
-    await page.mouse.move(700, 200)
-    await page.mouse.click(700, 200)
-
     // Assert that we're on the distance step
     await expect(page.getByRole('button', { name: 'distance' })).toBeDisabled()
 
@@ -1158,9 +1004,9 @@ test.describe('Command bar tests', () => {
       `const distance = sqrt(20)
 const distance001 = 5 + 7
 const part001 = startSketchOn('-XZ')
-    |> startProfileAt([-6.95, 10.98], %)
+    |> startProfileAt([-6.95, 4.98], %)
     |> line([25.1, 0.41], %)
-    |> line([0.73, -20.93], %)
+    |> line([0.73, -14.93], %)
     |> line([-23.44, 0.52], %)
     |> close(%)
     |> extrude(distance001, %)`.replace(/(\r\n|\n|\r)/gm, '') // remove newlines
@@ -1169,7 +1015,6 @@ const part001 = startSketchOn('-XZ')
 })
 
 test('Can add multiple sketches', async ({ page }) => {
-  test.skip(process.platform === 'darwin', 'Can add multiple sketches')
   const u = getUtils(page)
   await page.setViewportSize({ width: 1200, height: 500 })
   const PUR = 400 / 37.5 //pixeltoUnitRatio
@@ -1220,7 +1065,6 @@ test('Can add multiple sketches', async ({ page }) => {
   |> startProfileAt(${commonPoints.startAt}, %)
   |> line([${commonPoints.num1}, 0], %)
   |> line([0, ${commonPoints.num1}], %)`)
-  await page.waitForTimeout(100)
   await page.mouse.click(startXPx, 500 - PUR * 20)
   const finalCodeFirstSketch = `const part001 = startSketchOn('-XZ')
   |> startProfileAt(${commonPoints.startAt}, %)
@@ -1236,33 +1080,24 @@ test('Can add multiple sketches', async ({ page }) => {
 
   await u.expectCmdLog('[data-message-type="execution-done"]')
 
-  await u.updateCamPosition([100, 100, 100])
+  await u.updateCamPosition([0, 100, 100])
-  await page.waitForTimeout(250)
 
   // start a new sketch
   await u.clearCommandLogs()
   await page.getByRole('button', { name: 'Start Sketch' }).click()
-  await page.waitForTimeout(400)
+  await page.waitForTimeout(100)
-  await page.mouse.click(650, 450)
+  await page.mouse.click(673, 384)
 
   await page.waitForTimeout(500) // TODO detect animation ending, or disable animation
   await u.clearAndCloseDebugPanel()
 
-  // on mock os there are issues with getting the camera to update
-  // it should not be selecting the 'XZ' plane here if the camera updated
-  // properly, but if we just role with it we can still verify everything
-  // in the rest of the test
-  const plane = process.platform === 'darwin' ? 'XZ' : 'XY'
-
-  await page.waitForTimeout(100)
   await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-  const startAt2 =
+  const startAt2 = '[0.93,-1.25]'
-    process.platform === 'darwin' ? '[9.75, -13.16]' : '[0.93, -1.25]'
   await expect(
     (await page.locator('.cm-content').innerText()).replace(/\s/g, '')
   ).toBe(
     `${finalCodeFirstSketch}
-const part002 = startSketchOn('${plane}')
+const part002 = startSketchOn('XY')
   |> startProfileAt(${startAt2}, %)`.replace(/\s/g, '')
   )
   await page.waitForTimeout(100)
@@ -1271,12 +1106,12 @@ const part002 = startSketchOn('${plane}')
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
   await page.waitForTimeout(100)
 
-  const num2 = process.platform === 'darwin' ? 9.84 : 0.94
+  const num2 = 0.94
   await expect(
     (await page.locator('.cm-content').innerText()).replace(/\s/g, '')
   ).toBe(
     `${finalCodeFirstSketch}
-const part002 = startSketchOn('${plane}')
+const part002 = startSketchOn('XY')
   |> startProfileAt(${startAt2}, %)
   |> line([${num2}, 0], %)`.replace(/\s/g, '')
   )
@@ -1286,29 +1121,21 @@ const part002 = startSketchOn('${plane}')
     (await page.locator('.cm-content').innerText()).replace(/\s/g, '')
   ).toBe(
     `${finalCodeFirstSketch}
-const part002 = startSketchOn('${plane}')
+const part002 = startSketchOn('XY')
   |> startProfileAt(${startAt2}, %)
   |> line([${num2}, 0], %)
-  |> line([0, ${roundOff(
+  |> line([0, ${roundOff(num2 - 0.01)}], %)`.replace(/\s/g, '')
-    num2 + (process.platform === 'darwin' ? 0.01 : -0.01)
-  )}], %)`.replace(/\s/g, '')
   )
-  await page.waitForTimeout(100)
   await page.mouse.click(startXPx, 500 - PUR * 20)
   await expect(
     (await page.locator('.cm-content').innerText()).replace(/\s/g, '')
   ).toBe(
     `${finalCodeFirstSketch}
-const part002 = startSketchOn('${plane}')
+const part002 = startSketchOn('XY')
   |> startProfileAt(${startAt2}, %)
   |> line([${num2}, 0], %)
-  |> line([0, ${roundOff(
+  |> line([0, ${roundOff(num2 - 0.01)}], %)
-    num2 + (process.platform === 'darwin' ? 0.01 : -0.01)
+  |> line([-1.87, 0], %)`.replace(/\s/g, '')
-  )}], %)
-  |> line([-${process.platform === 'darwin' ? 19.59 : 1.87}, 0], %)`.replace(
-      /\s/g,
-      ''
-    )
   )
 })
 
@@ -1351,72 +1178,6 @@ test('ProgramMemory can be serialised', async ({ page }) => {
   })
 })
 
-test('Hovering over 3d features highlights code', async ({ page }) => {
-  const u = getUtils(page)
-  await page.addInitScript(async () => {
-    localStorage.setItem(
-      'persistCode',
-      `const part001 = startSketchOn('-XZ')
-  |> startProfileAt([20, 0], %)
-  |> line([7.13, 4 + 0], %)
-  |> angledLine({ angle: 3 + 0, length: 3.14 + 0 }, %)
-  |> lineTo([20.14 + 0, -0.14 + 0], %)
-  |> xLineTo(29 + 0, %)
-  |> yLine(-3.14 + 0, %, 'a')
-  |> xLine(1.63, %)
-  |> angledLineOfXLength({ angle: 3 + 0, length: 3.14 }, %)
-  |> angledLineOfYLength({ angle: 30, length: 3 + 0 }, %)
-  |> angledLineToX({ angle: 22.14 + 0, to: 12 }, %)
-  |> angledLineToY({ angle: 30, to: 11.14 }, %)
-  |> angledLineThatIntersects({
-        angle: 3.14,
-        intersectTag: 'a',
-        offset: 0
-      }, %)
-  |> tangentialArcTo([13.14 + 0, 13.14], %)
-  |> close(%)
-  |> extrude(5 + 7, %)    
-`
-    )
-  })
-  await page.setViewportSize({ width: 1000, height: 500 })
-  await page.goto('/')
-  await u.waitForAuthSkipAppStart()
-
-  const extrusionTop: Coords2d = [800, 240]
-  const flatExtrusionFace: Coords2d = [960, 160]
-  const arc: Coords2d = [840, 160]
-  const close: Coords2d = [720, 200]
-  const nothing: Coords2d = [600, 200]
-
-  await page.mouse.move(nothing[0], nothing[1])
-  await page.mouse.click(nothing[0], nothing[1])
-
-  await expect(page.getByTestId('hover-highlight')).not.toBeVisible()
-  await page.waitForTimeout(200)
-
-  await page.mouse.move(extrusionTop[0], extrusionTop[1])
-  await expect(page.getByTestId('hover-highlight')).toBeVisible()
-  await page.mouse.move(nothing[0], nothing[1])
-  await expect(page.getByTestId('hover-highlight')).not.toBeVisible()
-
-  await page.mouse.move(arc[0], arc[1])
-  await expect(page.getByTestId('hover-highlight')).toBeVisible()
-  await page.mouse.move(nothing[0], nothing[1])
-  await expect(page.getByTestId('hover-highlight')).not.toBeVisible()
-
-  await page.mouse.move(close[0], close[1])
-  await expect(page.getByTestId('hover-highlight')).toBeVisible()
-  await page.mouse.move(nothing[0], nothing[1])
-  await expect(page.getByTestId('hover-highlight')).not.toBeVisible()
-
-  await page.mouse.move(flatExtrusionFace[0], flatExtrusionFace[1])
-  await expect(page.getByTestId('hover-highlight')).toHaveCount(5) // multiple lines
-  await page.mouse.move(nothing[0], nothing[1])
-  await page.waitForTimeout(100)
-  await expect(page.getByTestId('hover-highlight')).not.toBeVisible()
-})
-
 test("Various pipe expressions should and shouldn't allow edit and or extrude", async ({
   page,
 }) => {
@@ -1551,7 +1312,7 @@ test('Deselecting line tool should mean nothing happens on click', async ({
     `const part001 = startSketchOn('-XZ')`
   )
 
-  await page.waitForTimeout(600)
+  await page.waitForTimeout(300)
 
   let previousCodeContent = await page.locator('.cm-content').innerText()
 
@@ -1578,12 +1339,10 @@ test('Deselecting line tool should mean nothing happens on click', async ({
   await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
   previousCodeContent = await page.locator('.cm-content').innerText()
 
-  await page.waitForTimeout(100)
   await page.mouse.click(700, 300)
   await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
   previousCodeContent = await page.locator('.cm-content').innerText()
 
-  await page.waitForTimeout(100)
   await page.mouse.click(750, 300)
   await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
   previousCodeContent = await page.locator('.cm-content').innerText()
@@ -1608,16 +1367,16 @@ test('Can edit segments by dragging their handles', async ({ page }) => {
     page.getByRole('button', { name: 'Start Sketch' })
   ).not.toBeDisabled()
 
-  const startPX = [665, 458]
+  const startPX = [652, 418]
-  const lineEndPX = [842, 458]
+  const lineEndPX = [794, 416]
-  const arcEndPX = [971, 342]
+  const arcEndPX = [893, 318]
 
   const dragPX = 30
 
   await page.getByText('startProfileAt([4.61, -14.01], %)').click()
   await expect(page.getByRole('button', { name: 'Edit Sketch' })).toBeVisible()
   await page.getByRole('button', { name: 'Edit Sketch' }).click()
-  await page.waitForTimeout(400)
+  await page.waitForTimeout(100)
   let prevContent = await page.locator('.cm-content').innerText()
 
   const step5 = { steps: 5 }
@@ -1627,7 +1386,7 @@ test('Can edit segments by dragging their handles', async ({ page }) => {
   await page.mouse.down()
   await page.mouse.move(startPX[0] + dragPX, startPX[1] - dragPX, step5)
   await page.mouse.up()
-
+  await page.waitForTimeout(100)
   await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
   prevContent = await page.locator('.cm-content').innerText()
 
@@ -1655,9 +1414,9 @@ test('Can edit segments by dragging their handles', async ({ page }) => {
   // expect the code to have changed
   await expect(page.locator('.cm-content'))
     .toHaveText(`const part001 = startSketchOn('-XZ')
-  |> startProfileAt([6.44, -12.07], %)
+  |> startProfileAt([7.01, -11.79], %)
-  |> line([14.04, 2.03], %)
+  |> line([14.69, 2.73], %)
-  |> tangentialArcTo([27.19, -4.2], %)`)
+  |> tangentialArcTo([27.6, -3.25], %)`)
 })
 
 const doSnapAtDifferentScales = async (
@@ -1776,46 +1535,38 @@ test('Sketch on face', async ({ page }) => {
   ).not.toBeDisabled()
 
   await page.getByRole('button', { name: 'Start Sketch' }).click()
-  await page.waitForTimeout(300)
 
   let previousCodeContent = await page.locator('.cm-content').innerText()
 
-  await u.openAndClearDebugPanel()
+  await page.mouse.click(793, 133)
-  await u.doAndWaitForCmd(
-    () => page.mouse.click(793, 133),
-    'default_camera_get_settings',
-    true
-  )
-  await page.waitForTimeout(150)
 
   const firstClickPosition = [612, 238]
   const secondClickPosition = [661, 242]
   const thirdClickPosition = [609, 267]
 
+  await page.waitForTimeout(300)
+
   await page.mouse.click(firstClickPosition[0], firstClickPosition[1])
   await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
   previousCodeContent = await page.locator('.cm-content').innerText()
 
-  await page.waitForTimeout(100)
   await page.mouse.click(secondClickPosition[0], secondClickPosition[1])
   await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
   previousCodeContent = await page.locator('.cm-content').innerText()
 
-  await page.waitForTimeout(100)
   await page.mouse.click(thirdClickPosition[0], thirdClickPosition[1])
   await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
   previousCodeContent = await page.locator('.cm-content').innerText()
 
-  await page.waitForTimeout(100)
   await page.mouse.click(firstClickPosition[0], firstClickPosition[1])
   await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
   previousCodeContent = await page.locator('.cm-content').innerText()
 
   await expect(page.locator('.cm-content'))
     .toContainText(`const part002 = startSketchOn(part001, 'seg01')
-  |> startProfileAt([-12.83, 6.7], %)
+  |> startProfileAt([1.03, 1.03], %)
-  |> line([2.87, -0.23], %)
+  |> line([4.18, -0.35], %)
-  |> line([-3.05, -1.47], %)
+  |> line([-4.44, -2.13], %)
   |> close(%)`)
 
   await u.openAndClearDebugPanel()
@@ -1825,14 +1576,9 @@ test('Sketch on face', async ({ page }) => {
   await u.updateCamPosition([1049, 239, 686])
   await u.closeDebugPanel()
 
-  await page.getByText('startProfileAt([-12.83, 6.7], %)').click()
+  await page.getByText('startProfileAt([1.03, 1.03], %)').click()
   await expect(page.getByRole('button', { name: 'Edit Sketch' })).toBeVisible()
-  await u.doAndWaitForCmd(
+  await page.getByRole('button', { name: 'Edit Sketch' }).click()
-    () => page.getByRole('button', { name: 'Edit Sketch' }).click(),
-    'default_camera_get_settings',
-    true
-  )
-  await page.waitForTimeout(150)
   await page.setViewportSize({ width: 1200, height: 1200 })
   await u.openAndClearDebugPanel()
   await u.updateCamPosition([452, -152, 1166])
@@ -1850,20 +1596,21 @@ test('Sketch on face', async ({ page }) => {
   await expect(page.locator('.cm-content')).not.toHaveText(previousCodeContent)
   previousCodeContent = await page.locator('.cm-content').innerText()
 
-  const result = makeTemplate`const part002 = startSketchOn(part001, 'seg01')
+  await expect(page.locator('.cm-content'))
-  |> startProfileAt([-12.83, 6.7], %)
+    .toContainText(`const part002 = startSketchOn(part001, 'seg01')
-  |> line([${[2.28, 2.35]}, -${0.07}], %)
+|> startProfileAt([1.03, 1.03], %)
-  |> line([-3.05, -1.47], %)
+|> line([${process?.env?.CI ? 2.74 : 2.93}, -${
-  |> close(%)`
+    process?.env?.CI ? 0.24 : 0.2
-
+  }], %)
-  await expect(page.locator('.cm-content')).toHaveText(result.regExp)
+|> line([-4.44, -2.13], %)
+|> close(%)`)
 
   // exit sketch
   await u.openAndClearDebugPanel()
   await page.getByRole('button', { name: 'Exit Sketch' }).click()
   await u.expectCmdLog('[data-message-type="execution-done"]')
 
-  await page.getByText('startProfileAt([-12.83, 6.7], %)').click()
+  await page.getByText('startProfileAt([1.03, 1.03], %)').click()
 
   await expect(page.getByRole('button', { name: 'Extrude' })).not.toBeDisabled()
   await page.getByRole('button', { name: 'Extrude' }).click()
@@ -1875,9 +1622,15 @@ test('Sketch on face', async ({ page }) => {
   await expect(page.getByText('Confirm Extrude')).toBeVisible()
   await page.keyboard.press('Enter')
 
-  const result2 = result.genNext`
+  await expect(page.locator('.cm-content'))
-  |> extrude(${[5, 5]} + 7, %)`
+    .toContainText(`const part002 = startSketchOn(part001, 'seg01')
-  await expect(page.locator('.cm-content')).toHaveText(result2.regExp)
+|> startProfileAt([1.03, 1.03], %)
+|> line([${process?.env?.CI ? 2.74 : 2.93}, -${
+    process?.env?.CI ? 0.24 : 0.2
+  }], %)
+|> line([-4.44, -2.13], %)
+|> close(%)
+|> extrude(5 + 7, %)`)
 })
 
 test('Can code mod a line length', async ({ page }) => {
@@ -1908,12 +1661,11 @@ test('Can code mod a line length', async ({ page }) => {
 
   // enter sketch again
   await page.getByRole('button', { name: 'Edit Sketch' }).click()
-  await page.waitForTimeout(350) // wait for animation
+  await page.waitForTimeout(300) // wait for animation
 
   const startXPx = 500
   await page.mouse.move(startXPx + PUR * 15, 250 - PUR * 10)
-  await page.mouse.click(615, 102)
+  await page.mouse.click(615, 133)
-  await page.getByRole('button', { name: 'Constrain', exact: true }).click()
   await page.getByRole('button', { name: 'length', exact: true }).click()
   await page.getByText('Add constraining value').click()
 
@@ -1921,42 +1673,3 @@ test('Can code mod a line length', async ({ page }) => {
     `const length001 = 20const part001 = startSketchOn('XY')  |> startProfileAt([-10, -10], %)  |> line([20, 0], %)  |> line([0, 20], %)  |> xLine(-length001, %)`
   )
 })
-
-test('Extrude from command bar selects extrude line after', async ({
-  page,
-}) => {
-  await page.addInitScript(async () => {
-    localStorage.setItem(
-      'persistCode',
-      `const part001 = startSketchOn('XY')
-  |> startProfileAt([-10, -10], %)
-  |> line([20, 0], %)
-  |> line([0, 20], %)
-  |> xLine(-20, %)
-  |> close(%)
-    `
-    )
-  })
-
-  const u = getUtils(page)
-  await page.setViewportSize({ width: 1200, height: 500 })
-  await page.goto('/')
-  await u.waitForAuthSkipAppStart()
-  await u.openDebugPanel()
-  await u.expectCmdLog('[data-message-type="execution-done"]')
-  await u.closeDebugPanel()
-
-  // Click the line of code for xLine.
-  await page.getByText(`close(%)`).click() // TODO remove this and reinstate // await topHorzSegmentClick()
-  await page.waitForTimeout(100)
-
-  await page.getByRole('button', { name: 'Extrude' }).click()
-  await page.waitForTimeout(100)
-  await page.keyboard.press('Enter')
-  await page.waitForTimeout(100)
-  await page.keyboard.press('Enter')
-  await page.waitForTimeout(100)
-  await expect(page.locator('.cm-activeLine')).toHaveText(
-    `  |> extrude(5 + 7, %)`
-  )
-})

e2e/playwright/snapshot-tests.spec.ts

@@ -507,7 +507,7 @@ test('Draft rectangles should look right', async ({ page, context }) => {
     `const part001 = startSketchOn('-XZ')`
   )
 
-  await page.waitForTimeout(500) // TODO detect animation ending, or disable animation
+  await page.waitForTimeout(300) // TODO detect animation ending, or disable animation
   await u.closeDebugPanel()
 
   const startXPx = 600
@@ -597,15 +597,12 @@ test.describe('Client side scene scale should match engine scale', () => {
 
     // exit sketch
     await u.openAndClearDebugPanel()
-    await u.doAndWaitForImageDiff(
+    await page.getByRole('button', { name: 'Exit Sketch' }).click()
-      () => page.getByRole('button', { name: 'Exit Sketch' }).click(),
-      200
-    )
 
     // wait for execution done
     await u.expectCmdLog('[data-message-type="execution-done"]')
     await u.clearAndCloseDebugPanel()
-    await page.waitForTimeout(300)
+    await page.waitForTimeout(200)
 
     // second screen shot should look almost identical, i.e. scale should be the same.
     await expect(page).toHaveScreenshot({
@@ -699,15 +696,12 @@ test.describe('Client side scene scale should match engine scale', () => {
 
     // exit sketch
     await u.openAndClearDebugPanel()
-    await u.doAndWaitForImageDiff(
+    await page.getByRole('button', { name: 'Exit Sketch' }).click()
-      () => page.getByRole('button', { name: 'Exit Sketch' }).click(),
-      200
-    )
 
     // wait for execution done
     await u.expectCmdLog('[data-message-type="execution-done"]')
     await u.clearAndCloseDebugPanel()
-    await page.waitForTimeout(300)
+    await page.waitForTimeout(200)
 
     // second screen shot should look almost identical, i.e. scale should be the same.
     await expect(page).toHaveScreenshot({

e2e/playwright/storageStates.ts

@@ -1,13 +1,12 @@
 import { SaveSettingsPayload } from 'lib/settings/settingsTypes'
 import { Themes } from 'lib/theme'
 
-export const TEST_SETTINGS_KEY = '/settings.toml'
+export const TEST_SETTINGS_KEY = '/user.toml'
 export const TEST_SETTINGS = {
   app: {
     theme: Themes.Dark,
     onboardingStatus: 'dismissed',
     projectDirectory: '',
-    enableSSAO: false,
   },
   modeling: {
     defaultUnit: 'in',
@@ -22,14 +21,9 @@ export const TEST_SETTINGS = {
   },
 } satisfies Partial<SaveSettingsPayload>
 
-export const TEST_SETTINGS_ONBOARDING_EXPORT = {
+export const TEST_SETTINGS_ONBOARDING = {
   ...TEST_SETTINGS,
-  app: { ...TEST_SETTINGS.app, onboardingStatus: '/export' },
+  app: { ...TEST_SETTINGS.app, onboardingStatus: '/export ' },
-} satisfies Partial<SaveSettingsPayload>
-
-export const TEST_SETTINGS_ONBOARDING_START = {
-  ...TEST_SETTINGS,
-  app: { ...TEST_SETTINGS.app, onboardingStatus: '' },
 } satisfies Partial<SaveSettingsPayload>
 
 export const TEST_SETTINGS_CORRUPTED = {

e2e/playwright/test-utils.ts

@@ -182,76 +182,3 @@ export function getUtils(page: Page) {
       }),
   }
 }
-
-type TemplateOptions = Array<number | Array<number>>
-
-type makeTemplateReturn = {
-  regExp: RegExp
-  genNext: (
-    templateParts: TemplateStringsArray,
-    ...options: TemplateOptions
-  ) => makeTemplateReturn
-}
-
-const escapeRegExp = (string: string) => {
-  return string.replace(/[.*+?^${}()|[\]\\]/g, '\\$&') // $& means the whole matched string
-}
-
-const _makeTemplate = (
-  templateParts: TemplateStringsArray,
-  ...options: TemplateOptions
-) => {
-  const length = Math.max(...options.map((a) => (Array.isArray(a) ? a[0] : 0)))
-  let reExpTemplate = ''
-  for (let i = 0; i < length; i++) {
-    const currentStr = templateParts.map((str, index) => {
-      const currentOptions = options[index]
-      return (
-        escapeRegExp(str) +
-        String(
-          Array.isArray(currentOptions)
-            ? currentOptions[i]
-            : typeof currentOptions === 'number'
-            ? currentOptions
-            : ''
-        )
-      )
-    })
-    reExpTemplate += '|' + currentStr.join('')
-  }
-  return new RegExp(reExpTemplate)
-}
-
-/**
- * Tool for making templates to match code snippets in the editor with some fudge factor,
- * as there's some level of non-determinism.
- *
- * Usage is as such:
- * ```typescript
- * const result = makeTemplate`const myVar = aFunc(${[1, 2, 3]})`
- * await expect(page.locator('.cm-content')).toHaveText(result.regExp)
- * ```
- * Where the value `1`, `2` or `3` are all valid and should make the test pass.
- *
- * The function also has a `genNext` function that allows you to chain multiple templates
- * together without having to repeat previous parts of the template.
- * ```typescript
- * const result2 = result.genNext`const myVar2 = aFunc(${[4, 5, 6]})`
- * ```
- */
-export const makeTemplate: (
-  templateParts: TemplateStringsArray,
-  ...values: TemplateOptions
-) => makeTemplateReturn = (templateParts, ...options) => {
-  return {
-    regExp: _makeTemplate(templateParts, ...options),
-    genNext: (
-      nextTemplateParts: TemplateStringsArray,
-      ...nextOptions: TemplateOptions
-    ) =>
-      makeTemplate(
-        [...templateParts, ...nextTemplateParts] as any as TemplateStringsArray,
-        [...options, ...nextOptions] as any
-      ),
-  }
-}

e2e/tauri/specs/auth.e2e.ts

@@ -2,7 +2,7 @@ import { browser, $, expect } from '@wdio/globals'
 import fs from 'fs/promises'
 
 const documentsDir = `${process.env.HOME}/Documents`
-const userSettingsDir = `${process.env.HOME}/.config/dev.zoo.modeling-app`
+const userSettingsFile = `${process.env.HOME}/.config/dev.zoo.modeling-app/user.toml`
 const defaultProjectDir = `${documentsDir}/zoo-modeling-app-projects`
 const newProjectDir = `${documentsDir}/a-different-directory`
 const userCodeDir = '/tmp/kittycad_user_code'
@@ -29,10 +29,8 @@ describe('ZMA (Tauri, Linux)', () => {
     // Clean up filesystem from previous tests
     await new Promise((resolve) => setTimeout(resolve, 100))
     await fs.rm(defaultProjectDir, { force: true, recursive: true })
-    await fs.rm(newProjectDir, { force: true, recursive: true })
     await fs.rm(userCodeDir, { force: true })
-    await fs.rm(userSettingsDir, { force: true, recursive: true })
+    await fs.rm(userSettingsFile, { force: true })
-    await fs.mkdir(defaultProjectDir, { recursive: true })
     await fs.mkdir(newProjectDir, { recursive: true })
 
     const signInButton = await $('[data-testid="sign-in-button"]')
@@ -72,9 +70,8 @@ describe('ZMA (Tauri, Linux)', () => {
     console.log(cr.status)
 
     // Now should be signed in
-    await new Promise((resolve) => setTimeout(resolve, 10000))
     const newFileButton = await $('[data-testid="home-new-file"]')
-    expect(await newFileButton.getText()).toEqual('New project')
+    expect(await newFileButton.getText()).toEqual('New file')
   })
 
   it('opens the settings page, checks filesystem settings, and closes the settings page', async () => {
@@ -120,8 +117,8 @@ describe('ZMA (Tauri, Linux)', () => {
   it('opens the new file and expects a loading stream', async () => {
     const projectLink = await $('[data-testid="project-link"]')
     await click(projectLink)
-    const errorText = await $('[data-testid="unexpected-error"]')
+    const loadingText = await $('[data-testid="loading-stream"]')
-    expect(await errorText.getText()).toContain('unexpected error')
+    expect(await loadingText.getText()).toContain('Loading stream...')
     await browser.execute('window.location.href = "tauri://localhost/home"')
   })
 

get-latest-wasm-bundle.sh

@@ -1,24 +0,0 @@
-#!/bin/bash
-
-# Set the repository owner and name
-REPO_OWNER="KittyCAD"
-REPO_NAME="modeling-app"
-WORKFLOW_NAME="build-and-store-wasm.yml"
-ARTIFACT_NAME="wasm-bundle"
-
-# Fetch the latest completed workflow run ID for the specified workflow
-# RUN_ID=$(gh api repos/$REPO_OWNER/$REPO_NAME/actions/workflows/$WORKFLOW_NAME/runs --paginate --jq '.workflow_runs[] | select(.status=="completed") | .id' | head -n 1)
-RUN_ID=$(gh api repos/$REPO_OWNER/$REPO_NAME/actions/workflows/$WORKFLOW_NAME/runs --paginate --jq '.workflow_runs[] | select(.status=="completed" and .conclusion=="success") | .id' | head -n 1)
-
-echo $RUN_ID
-
-# Check if a valid RUN_ID was found
-if [ -z "$RUN_ID" ]; then
-  echo "Failed to find a workflow run for $WORKFLOW_NAME."
-  exit 1
-fi
-
-gh run download $RUN_ID --repo $REPO_OWNER/$REPO_NAME --name $ARTIFACT_NAME --dir ./src/wasm-lib/pkg
-
-cp src/wasm-lib/pkg/wasm_lib_bg.wasm public
-echo "latest wasm copied to public folder"

index.html

@@ -15,7 +15,7 @@
     <script
       defer
       data-domain="app.zoo.dev"
-      src="https://plausible.corp.zoo.dev/js/script.tagged-events.js"
+      src="https://plausible.corp.zoo.dev/js/script.js"
     ></script>
     <title>Zoo Modeling App</title>
   </head>

make-release.sh

@@ -57,7 +57,7 @@ echo "New version number without 'v': $new_version_number"
 git checkout -b "cut-release-$new_version"
 
 echo "$(jq --arg v "$new_version_number" '.version=$v' package.json --indent 2)" > package.json
-echo "$(jq --arg v "$new_version_number" '.version=$v' src-tauri/tauri.conf.json --indent 2)" > src-tauri/tauri.conf.json
+echo "$(jq --arg v "$new_version_number" '.package.version=$v' src-tauri/tauri.conf.json --indent 2)" > src-tauri/tauri.conf.json
 
 git add package.json src-tauri/tauri.conf.json
 git commit -m "Cut release $new_version"