Cut release v0.22.5 (#2751)

Signed-off-by: Jess Frazelle <github@jessfraz.com>

docs/kcl/chamfer.md

@@ -62,8 +62,80 @@ string],
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The sketch group paths.
+	// The sketch group.
-	sketchGroupValues: [{
+	sketchGroup: {
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
 	// The from point.
 	from: [number, number],
 	// The name of the path.
@@ -127,6 +199,7 @@ string],
 	to: [number, number],
 	type: "Base",
 }],
+},
 	// The id of the extrusion start cap
 	startCapId: uuid,
 	// The extrude surfaces.
@@ -152,24 +225,6 @@ string],
 	sourceRange: [number, number],
 	type: "extrudeArc",
 }],
-	// The x-axis of the extrude group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the extrude group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the extrude group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 
@@ -184,8 +239,80 @@ string],
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The sketch group paths.
+	// The sketch group.
-	sketchGroupValues: [{
+	sketchGroup: {
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
 	// The from point.
 	from: [number, number],
 	// The name of the path.
@@ -249,6 +376,7 @@ string],
 	to: [number, number],
 	type: "Base",
 }],
+},
 	// The id of the extrusion start cap
 	startCapId: uuid,
 	// The extrude surfaces.
@@ -274,24 +402,6 @@ string],
 	sourceRange: [number, number],
 	type: "extrudeArc",
 }],
-	// The x-axis of the extrude group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the extrude group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the extrude group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/extrude.md

@@ -220,8 +220,80 @@ const example = extrude(10, exampleSketch)
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The sketch group paths.
+	// The sketch group.
-	sketchGroupValues: [{
+	sketchGroup: {
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
 	// The from point.
 	from: [number, number],
 	// The name of the path.
@@ -285,6 +357,7 @@ const example = extrude(10, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
+},
 	// The id of the extrusion start cap
 	startCapId: uuid,
 	type: "extrudeGroup",
@@ -311,24 +384,6 @@ const example = extrude(10, exampleSketch)
 	sourceRange: [number, number],
 	type: "extrudeArc",
 }],
-	// The x-axis of the extrude group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the extrude group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the extrude group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 } |
 {
 	type: "extrudeGroups",

docs/kcl/fillet.md

@@ -62,8 +62,80 @@ string],
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The sketch group paths.
+	// The sketch group.
-	sketchGroupValues: [{
+	sketchGroup: {
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
 	// The from point.
 	from: [number, number],
 	// The name of the path.
@@ -127,6 +199,7 @@ string],
 	to: [number, number],
 	type: "Base",
 }],
+},
 	// The id of the extrusion start cap
 	startCapId: uuid,
 	// The extrude surfaces.
@@ -152,24 +225,6 @@ string],
 	sourceRange: [number, number],
 	type: "extrudeArc",
 }],
-	// The x-axis of the extrude group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the extrude group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the extrude group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 
@@ -184,8 +239,80 @@ string],
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The sketch group paths.
+	// The sketch group.
-	sketchGroupValues: [{
+	sketchGroup: {
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
 	// The from point.
 	from: [number, number],
 	// The name of the path.
@@ -249,6 +376,7 @@ string],
 	to: [number, number],
 	type: "Base",
 }],
+},
 	// The id of the extrusion start cap
 	startCapId: uuid,
 	// The extrude surfaces.
@@ -274,24 +402,6 @@ string],
 	sourceRange: [number, number],
 	type: "extrudeArc",
 }],
-	// The x-axis of the extrude group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the extrude group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the extrude group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/getEdge.md

@@ -49,8 +49,80 @@ const revolution = startSketchOn(box, "revolveAxis")
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The sketch group paths.
+	// The sketch group.
-	sketchGroupValues: [{
+	sketchGroup: {
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
 	// The from point.
 	from: [number, number],
 	// The name of the path.
@@ -114,6 +186,7 @@ const revolution = startSketchOn(box, "revolveAxis")
 	to: [number, number],
 	type: "Base",
 }],
+},
 	// The id of the extrusion start cap
 	startCapId: uuid,
 	// The extrude surfaces.
@@ -139,24 +212,6 @@ const revolution = startSketchOn(box, "revolveAxis")
 	sourceRange: [number, number],
 	type: "extrudeArc",
 }],
-	// The x-axis of the extrude group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the extrude group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the extrude group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/getNextAdjacentEdge.md

@@ -47,8 +47,80 @@ const example = extrude(5, exampleSketch)
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The sketch group paths.
+	// The sketch group.
-	sketchGroupValues: [{
+	sketchGroup: {
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
 	// The from point.
 	from: [number, number],
 	// The name of the path.
@@ -112,6 +184,7 @@ const example = extrude(5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
+},
 	// The id of the extrusion start cap
 	startCapId: uuid,
 	// The extrude surfaces.
@@ -137,24 +210,6 @@ const example = extrude(5, exampleSketch)
 	sourceRange: [number, number],
 	type: "extrudeArc",
 }],
-	// The x-axis of the extrude group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the extrude group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the extrude group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/getOppositeEdge.md

@@ -45,8 +45,80 @@ const example = extrude(5, exampleSketch)
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The sketch group paths.
+	// The sketch group.
-	sketchGroupValues: [{
+	sketchGroup: {
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
 	// The from point.
 	from: [number, number],
 	// The name of the path.
@@ -110,6 +182,7 @@ const example = extrude(5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
+},
 	// The id of the extrusion start cap
 	startCapId: uuid,
 	// The extrude surfaces.
@@ -135,24 +208,6 @@ const example = extrude(5, exampleSketch)
 	sourceRange: [number, number],
 	type: "extrudeArc",
 }],
-	// The x-axis of the extrude group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the extrude group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the extrude group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/getPreviousAdjacentEdge.md

@@ -47,8 +47,80 @@ const example = extrude(5, exampleSketch)
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The sketch group paths.
+	// The sketch group.
-	sketchGroupValues: [{
+	sketchGroup: {
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
 	// The from point.
 	from: [number, number],
 	// The name of the path.
@@ -112,6 +184,7 @@ const example = extrude(5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
+},
 	// The id of the extrusion start cap
 	startCapId: uuid,
 	// The extrude surfaces.
@@ -137,24 +210,6 @@ const example = extrude(5, exampleSketch)
 	sourceRange: [number, number],
 	type: "extrudeArc",
 }],
-	// The x-axis of the extrude group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the extrude group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the extrude group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/helix.md

@@ -52,8 +52,80 @@ const part001 = startSketchOn('XY')
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The sketch group paths.
+	// The sketch group.
-	sketchGroupValues: [{
+	sketchGroup: {
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
 	// The from point.
 	from: [number, number],
 	// The name of the path.
@@ -117,6 +189,7 @@ const part001 = startSketchOn('XY')
 	to: [number, number],
 	type: "Base",
 }],
+},
 	// The id of the extrusion start cap
 	startCapId: uuid,
 	// The extrude surfaces.
@@ -142,24 +215,6 @@ const part001 = startSketchOn('XY')
 	sourceRange: [number, number],
 	type: "extrudeArc",
 }],
-	// The x-axis of the extrude group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the extrude group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the extrude group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 
@@ -174,8 +229,80 @@ const part001 = startSketchOn('XY')
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The sketch group paths.
+	// The sketch group.
-	sketchGroupValues: [{
+	sketchGroup: {
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
 	// The from point.
 	from: [number, number],
 	// The name of the path.
@@ -239,6 +366,7 @@ const part001 = startSketchOn('XY')
 	to: [number, number],
 	type: "Base",
 }],
+},
 	// The id of the extrusion start cap
 	startCapId: uuid,
 	// The extrude surfaces.
@@ -264,24 +392,6 @@ const part001 = startSketchOn('XY')
 	sourceRange: [number, number],
 	type: "extrudeArc",
 }],
-	// The x-axis of the extrude group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the extrude group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the extrude group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/patternCircular3d.md

@@ -56,8 +56,80 @@ const example = extrude(-5, exampleSketch)
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The sketch group paths.
+	// The sketch group.
-	sketchGroupValues: [{
+	sketchGroup: {
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
 	// The from point.
 	from: [number, number],
 	// The name of the path.
@@ -121,6 +193,7 @@ const example = extrude(-5, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
+},
 	// The id of the extrusion start cap
 	startCapId: uuid,
 	type: "extrudeGroup",
@@ -147,24 +220,6 @@ const example = extrude(-5, exampleSketch)
 	sourceRange: [number, number],
 	type: "extrudeArc",
 }],
-	// The x-axis of the extrude group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the extrude group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the extrude group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 } |
 {
 	type: "extrudeGroups",

docs/kcl/patternLinear3d.md

@@ -54,8 +54,80 @@ const example = extrude(1, exampleSketch)
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The sketch group paths.
+	// The sketch group.
-	sketchGroupValues: [{
+	sketchGroup: {
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
 	// The from point.
 	from: [number, number],
 	// The name of the path.
@@ -119,6 +191,7 @@ const example = extrude(1, exampleSketch)
 	to: [number, number],
 	type: "Base",
 }],
+},
 	// The id of the extrusion start cap
 	startCapId: uuid,
 	type: "extrudeGroup",
@@ -145,24 +218,6 @@ const example = extrude(1, exampleSketch)
 	sourceRange: [number, number],
 	type: "extrudeArc",
 }],
-	// The x-axis of the extrude group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the extrude group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the extrude group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 } |
 {
 	type: "extrudeGroups",

docs/kcl/revolve.md

@@ -311,8 +311,80 @@ string,
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The sketch group paths.
+	// The sketch group.
-	sketchGroupValues: [{
+	sketchGroup: {
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
 	// The from point.
 	from: [number, number],
 	// The name of the path.
@@ -376,6 +448,7 @@ string,
 	to: [number, number],
 	type: "Base",
 }],
+},
 	// The id of the extrusion start cap
 	startCapId: uuid,
 	// The extrude surfaces.
@@ -401,24 +474,6 @@ string,
 	sourceRange: [number, number],
 	type: "extrudeArc",
 }],
-	// The x-axis of the extrude group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the extrude group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the extrude group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/shell.md

@@ -50,8 +50,80 @@ string],
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The sketch group paths.
+	// The sketch group.
-	sketchGroupValues: [{
+	sketchGroup: {
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
 	// The from point.
 	from: [number, number],
 	// The name of the path.
@@ -115,6 +187,7 @@ string],
 	to: [number, number],
 	type: "Base",
 }],
+},
 	// The id of the extrusion start cap
 	startCapId: uuid,
 	// The extrude surfaces.
@@ -140,24 +213,6 @@ string],
 	sourceRange: [number, number],
 	type: "extrudeArc",
 }],
-	// The x-axis of the extrude group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the extrude group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the extrude group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 
@@ -172,8 +227,80 @@ string],
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The sketch group paths.
+	// The sketch group.
-	sketchGroupValues: [{
+	sketchGroup: {
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
 	// The from point.
 	from: [number, number],
 	// The name of the path.
@@ -237,6 +364,7 @@ string],
 	to: [number, number],
 	type: "Base",
 }],
+},
 	// The id of the extrusion start cap
 	startCapId: uuid,
 	// The extrude surfaces.
@@ -262,24 +390,6 @@ string],
 	sourceRange: [number, number],
 	type: "extrudeArc",
 }],
-	// The x-axis of the extrude group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the extrude group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the extrude group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 

docs/kcl/startSketchOn.md

@@ -167,8 +167,80 @@ const a1 = startSketchOn({
 	height: number,
 	// The id of the extrude group.
 	id: uuid,
-	// The sketch group paths.
+	// The sketch group.
-	sketchGroupValues: [{
+	sketchGroup: {
+	// The id of the sketch group.
+	id: uuid,
+	// What the sketch is on (can be a plane or a face).
+	on: {
+	// The id of the plane.
+	id: uuid,
+	// Origin of the plane.
+	origin: {
+	x: number,
+	y: number,
+	z: number,
+},
+	type: "plane",
+	// Type for a plane.
+	value: "XY" | "XZ" | "YZ" | "Custom",
+	// What should the plane’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the plane’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+} |
+{
+	// The id of the face.
+	id: uuid,
+	// The original sketch group id of the object we are sketching on.
+	sketchGroupId: uuid,
+	type: "face",
+	// The tag of the face.
+	value: string,
+	// What should the face’s X axis be?
+	xAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// What should the face’s Y axis be?
+	yAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+	// The z-axis (normal).
+	zAxis: {
+	x: number,
+	y: number,
+	z: number,
+},
+},
+	// The starting path.
+	start: {
+	// The from point.
+	from: [number, number],
+	// The name of the path.
+	name: string,
+	// The to point.
+	to: [number, number],
+},
+	// The paths in the sketch group.
+	value: [{
 	// The from point.
 	from: [number, number],
 	// The name of the path.
@@ -232,6 +304,7 @@ const a1 = startSketchOn({
 	to: [number, number],
 	type: "Base",
 }],
+},
 	// The id of the extrusion start cap
 	startCapId: uuid,
 	// The extrude surfaces.
@@ -257,24 +330,6 @@ const a1 = startSketchOn({
 	sourceRange: [number, number],
 	type: "extrudeArc",
 }],
-	// The x-axis of the extrude group base plane in the 3D space
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The y-axis of the extrude group base plane in the 3D space
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis of the extrude group base plane in the 3D space
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
 }
 ```
 * `tag`: `SketchOnFaceTag` - A tag for sketch on face. (OPTIONAL)

e2e/playwright/flow-tests.spec.ts

@@ -6,6 +6,7 @@ import {
   wiggleMove,
   doExport,
   metaModifier,
+  TEST_COLORS,
 } from './test-utils'
 import waitOn from 'wait-on'
 import { XOR, roundOff, uuidv4 } from 'lib/utils'
@@ -77,7 +78,7 @@ test.beforeEach(async ({ context, page }) => {
 
 test.setTimeout(60000)
 
-test('Basic sketch', async ({ page }) => {
+async function doBasicSketch(page: Page, openPanes: string[]) {
   const u = await getUtils(page)
   await page.setViewportSize({ width: 1200, height: 500 })
   const PUR = 400 / 37.5 //pixeltoUnitRatio
@@ -85,6 +86,14 @@ test('Basic sketch', async ({ page }) => {
   await u.waitForAuthSkipAppStart()
   await u.openDebugPanel()
 
+  // If we have the code pane open, we should see the code.
+  if (openPanes.includes('code')) {
+    await expect(u.codeLocator).toHaveText(``)
+  } else {
+    // Ensure we don't see the code.
+    await expect(u.codeLocator).not.toBeVisible()
+  }
+
   await expect(
     page.getByRole('button', { name: 'Start Sketch' })
   ).not.toBeDisabled()
@@ -98,51 +107,72 @@ test('Basic sketch', async ({ page }) => {
   // select a plane
   await page.mouse.click(700, 200)
 
-  await expect(u.codeLocator).toHaveText(
+  if (openPanes.includes('code')) {
-    `const sketch001 = startSketchOn('XZ')`
+    await expect(u.codeLocator).toHaveText(
-  )
+      `const sketch001 = startSketchOn('XZ')`
+    )
+  }
   await u.closeDebugPanel()
 
-  await page.waitForTimeout(500) // TODO detect animation ending, or disable animation
+  await page.waitForTimeout(1000) // TODO detect animation ending, or disable animation
 
   const startXPx = 600
   await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 10)
-  await expect(u.codeLocator).toHaveText(`const sketch001 = startSketchOn('XZ')
+  if (openPanes.includes('code')) {
+    await expect(u.codeLocator)
+      .toHaveText(`const sketch001 = startSketchOn('XZ')
   |> startProfileAt(${commonPoints.startAt}, %)`)
-  await page.waitForTimeout(100)
+  }
+  await page.waitForTimeout(500)
 
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
-  await page.waitForTimeout(100)
+  await page.waitForTimeout(500)
 
-  await expect(u.codeLocator).toHaveText(`const sketch001 = startSketchOn('XZ')
+  if (openPanes.includes('code')) {
+    await expect(u.codeLocator)
+      .toHaveText(`const sketch001 = startSketchOn('XZ')
   |> startProfileAt(${commonPoints.startAt}, %)
   |> line([${commonPoints.num1}, 0], %)`)
+  }
+  await page.waitForTimeout(500)
 
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 20)
-  await expect(u.codeLocator).toHaveText(`const sketch001 = startSketchOn('XZ')
+  if (openPanes.includes('code')) {
+    await expect(u.codeLocator)
+      .toHaveText(`const sketch001 = startSketchOn('XZ')
   |> startProfileAt(${commonPoints.startAt}, %)
   |> line([${commonPoints.num1}, 0], %)
   |> line([0, ${commonPoints.num1 + 0.01}], %)`)
-  await page.waitForTimeout(100)
+  }
+  await page.waitForTimeout(500)
   await page.mouse.click(startXPx, 500 - PUR * 20)
-  await expect(u.codeLocator).toHaveText(`const sketch001 = startSketchOn('XZ')
+  if (openPanes.includes('code')) {
+    await expect(u.codeLocator)
+      .toHaveText(`const sketch001 = startSketchOn('XZ')
   |> startProfileAt(${commonPoints.startAt}, %)
   |> line([${commonPoints.num1}, 0], %)
   |> line([0, ${commonPoints.num1 + 0.01}], %)
   |> line([-${commonPoints.num2}, 0], %)`)
+  }
 
   // deselect line tool
   await page.getByRole('button', { name: 'Line' }).click()
-  await page.waitForTimeout(100)
+  await page.waitForTimeout(500)
 
   const line1 = await u.getSegmentBodyCoords(`[data-overlay-index="${0}"]`, 0)
-  await expect(await u.getGreatestPixDiff(line1, [249, 249, 249])).toBeLessThan(
+  if (openPanes.includes('code')) {
-    3
+    expect(await u.getGreatestPixDiff(line1, TEST_COLORS.WHITE)).toBeLessThan(3)
-  )
+    await expect(
+      await u.getGreatestPixDiff(line1, [249, 249, 249])
+    ).toBeLessThan(3)
+  }
   // click between first two clicks to get center of the line
   await page.mouse.click(startXPx + PUR * 15, 500 - PUR * 10)
   await page.waitForTimeout(100)
-  await expect(await u.getGreatestPixDiff(line1, [0, 0, 255])).toBeLessThan(3)
+  if (openPanes.includes('code')) {
+    expect(await u.getGreatestPixDiff(line1, TEST_COLORS.BLUE)).toBeLessThan(3)
+    await expect(await u.getGreatestPixDiff(line1, [0, 0, 255])).toBeLessThan(3)
+  }
 
   // hold down shift
   await page.keyboard.down('Shift')
@@ -150,16 +180,55 @@ test('Basic sketch', async ({ page }) => {
   await page.mouse.click(startXPx + PUR * 10, 500 - PUR * 20)
 
   // selected two lines therefore there should be two cursors
-  await expect(page.locator('.cm-cursor')).toHaveCount(2)
+  if (openPanes.includes('code')) {
+    await expect(page.locator('.cm-cursor')).toHaveCount(2)
+  }
 
   await page.getByRole('button', { name: 'Constrain' }).click()
   await page.getByRole('button', { name: 'Equal Length' }).click()
 
+  // Open the code pane.
+  await u.openKclCodePanel()
   await expect(u.codeLocator).toHaveText(`const sketch001 = startSketchOn('XZ')
   |> startProfileAt(${commonPoints.startAt}, %)
   |> line([${commonPoints.num1}, 0], %, 'seg01')
   |> line([0, ${commonPoints.num1 + 0.01}], %)
   |> angledLine([180, segLen('seg01', %)], %)`)
+}
+
+test.describe('Basic sketch', () => {
+  test('code pane open at start', async ({ page }) => {
+    // Load the app with the code panes
+    await page.addInitScript(async () => {
+      localStorage.setItem(
+        'store',
+        JSON.stringify({
+          state: {
+            openPanes: ['code'],
+          },
+          version: 0,
+        })
+      )
+    })
+
+    await doBasicSketch(page, ['code'])
+  })
+
+  test('code pane closed at start', async ({ page }) => {
+    // Load the app with the code panes
+    await page.addInitScript(async () => {
+      localStorage.setItem(
+        'store',
+        JSON.stringify({
+          state: {
+            openPanes: [],
+          },
+          version: 0,
+        })
+      )
+    })
+    await doBasicSketch(page, [])
+  })
 })
 
 test.describe('Testing Camera Movement', () => {
@@ -2559,7 +2628,173 @@ const part002 = startSketchOn('-XZ')
   await expect(page.getByRole('button', { name: 'Edit Sketch' })).toBeVisible()
 })
 
-test('Can edit segments by dragging their handles', async ({ page }) => {
+async function doEditSegmentsByDraggingHandle(page: Page, openPanes: string[]) {
+  // Load the app with the code panes
+  await page.addInitScript(async () => {
+    localStorage.setItem(
+      'persistCode',
+      `const sketch001 = startSketchOn('XZ')
+  |> startProfileAt([4.61, -14.01], %)
+  |> line([12.73, -0.09], %)
+  |> tangentialArcTo([24.95, -5.38], %)
+  |> close(%)`
+    )
+  })
+
+  const u = await getUtils(page)
+  await page.setViewportSize({ width: 1200, height: 500 })
+  await page.goto('/')
+  await u.waitForAuthSkipAppStart()
+  await expect(
+    page.getByRole('button', { name: 'Start Sketch' })
+  ).not.toBeDisabled()
+
+  await page.waitForTimeout(100)
+  await u.openAndClearDebugPanel()
+  await u.sendCustomCmd({
+    type: 'modeling_cmd_req',
+    cmd_id: uuidv4(),
+    cmd: {
+      type: 'default_camera_look_at',
+      vantage: { x: 0, y: -1250, z: 580 },
+      center: { x: 0, y: 0, z: 0 },
+      up: { x: 0, y: 0, z: 1 },
+    },
+  })
+  await page.waitForTimeout(100)
+  await u.sendCustomCmd({
+    type: 'modeling_cmd_req',
+    cmd_id: uuidv4(),
+    cmd: {
+      type: 'default_camera_get_settings',
+    },
+  })
+  await page.waitForTimeout(100)
+  await u.closeDebugPanel()
+
+  // If we have the code pane open, we should see the code.
+  if (openPanes.includes('code')) {
+    await expect(u.codeLocator)
+      .toHaveText(`const sketch001 = startSketchOn('XZ')
+  |> startProfileAt([4.61, -14.01], %)
+  |> line([12.73, -0.09], %)
+  |> tangentialArcTo([24.95, -5.38], %)
+  |> close(%)`)
+  } else {
+    // Ensure we don't see the code.
+    await expect(u.codeLocator).not.toBeVisible()
+  }
+
+  const startPX = [665, 458]
+
+  const dragPX = 30
+  let prevContent = ''
+
+  if (openPanes.includes('code')) {
+    await page.getByText('startProfileAt([4.61, -14.01], %)').click()
+  } else {
+    // Wait for the render.
+    await page.waitForTimeout(1000)
+    // Select the sketch
+    await page.mouse.click(700, 370)
+  }
+  await expect(page.getByRole('button', { name: 'Edit Sketch' })).toBeVisible()
+  await page.getByRole('button', { name: 'Edit Sketch' }).click()
+  await page.waitForTimeout(400)
+  if (openPanes.includes('code')) {
+    prevContent = await page.locator('.cm-content').innerText()
+  }
+
+  const step5 = { steps: 5 }
+
+  await expect(page.getByTestId('segment-overlay')).toHaveCount(2)
+
+  // drag startProfieAt handle
+  await page.mouse.move(startPX[0], startPX[1])
+  await page.mouse.down()
+  await page.mouse.move(startPX[0] + dragPX, startPX[1] - dragPX, step5)
+  await page.mouse.up()
+
+  if (openPanes.includes('code')) {
+    await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+    prevContent = await page.locator('.cm-content').innerText()
+  }
+
+  // drag line handle
+  await page.waitForTimeout(100)
+
+  const lineEnd = await u.getBoundingBox('[data-overlay-index="0"]')
+  await page.mouse.move(lineEnd.x - 5, lineEnd.y)
+  await page.mouse.down()
+  await page.mouse.move(lineEnd.x + dragPX, lineEnd.y - dragPX, step5)
+  await page.mouse.up()
+  await page.waitForTimeout(100)
+  if (openPanes.includes('code')) {
+    await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+    prevContent = await page.locator('.cm-content').innerText()
+  }
+
+  // drag tangentialArcTo handle
+  const tangentEnd = await u.getBoundingBox('[data-overlay-index="1"]')
+  await page.mouse.move(tangentEnd.x, tangentEnd.y - 5)
+  await page.mouse.down()
+  await page.mouse.move(tangentEnd.x + dragPX, tangentEnd.y - dragPX, step5)
+  await page.mouse.up()
+  await page.waitForTimeout(100)
+  if (openPanes.includes('code')) {
+    await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+  }
+
+  // Open the code pane
+  await u.openKclCodePanel()
+
+  // expect the code to have changed
+  await expect(page.locator('.cm-content'))
+    .toHaveText(`const sketch001 = startSketchOn('XZ')
+  |> startProfileAt([6.44, -12.07], %)
+  |> line([14.72, 1.97], %)
+  |> tangentialArcTo([24.95, -5.38], %)
+  |> line([1.97, 2.06], %)
+  |> close(%)`)
+}
+
+test.describe('Can edit segments by dragging their handles', () => {
+  test('code pane open at start', async ({ page }) => {
+    // Load the app with the code panes
+    await page.addInitScript(async () => {
+      localStorage.setItem(
+        'store',
+        JSON.stringify({
+          state: {
+            openPanes: ['code'],
+          },
+          version: 0,
+        })
+      )
+    })
+    await doEditSegmentsByDraggingHandle(page, ['code'])
+  })
+
+  test('code pane closed at start', async ({ page }) => {
+    // Load the app with the code panes
+    await page.addInitScript(async () => {
+      localStorage.setItem(
+        'store',
+        JSON.stringify({
+          state: {
+            openPanes: [],
+          },
+          version: 0,
+        })
+      )
+    })
+    await doEditSegmentsByDraggingHandle(page, [])
+  })
+})
+
+test('Can edit a sketch that has been extruded in the same pipe', async ({
+  page,
+}) => {
   const u = await getUtils(page)
   await page.addInitScript(async () => {
     localStorage.setItem(
@@ -2567,7 +2802,9 @@ test('Can edit segments by dragging their handles', async ({ page }) => {
       `const sketch001 = startSketchOn('XZ')
   |> startProfileAt([4.61, -14.01], %)
   |> line([12.73, -0.09], %)
-  |> tangentialArcTo([24.95, -5.38], %)`
+  |> tangentialArcTo([24.95, -5.38], %)
+  |> close(%)
+  |> extrude(5, %)`
     )
   })
 
@@ -2648,8 +2885,111 @@ test('Can edit segments by dragging their handles', async ({ page }) => {
   await expect(page.locator('.cm-content'))
     .toHaveText(`const sketch001 = startSketchOn('XZ')
   |> startProfileAt([6.44, -12.07], %)
-  |> line([14.72, 1.97], %)
+  |> line([14.72, 2.01], %)
-  |> tangentialArcTo([26.92, -3.32], %)`)
+  |> tangentialArcTo([24.95, -5.38], %)
+  |> line([1.97, 2.06], %)
+  |> close(%)
+  |> extrude(5, %)`)
+})
+
+test('Can edit a sketch that has been revolved in the same pipe', async ({
+  page,
+}) => {
+  const u = await getUtils(page)
+  await page.addInitScript(async () => {
+    localStorage.setItem(
+      'persistCode',
+      `const sketch001 = startSketchOn('XZ')
+  |> startProfileAt([4.61, -14.01], %)
+  |> line([12.73, -0.09], %)
+  |> tangentialArcTo([24.95, -5.38], %)
+  |> close(%)
+  |> revolve({ axis: "X",}, %)`
+    )
+  })
+
+  await page.setViewportSize({ width: 1200, height: 500 })
+  await page.goto('/')
+  await u.waitForAuthSkipAppStart()
+  await expect(
+    page.getByRole('button', { name: 'Start Sketch' })
+  ).not.toBeDisabled()
+
+  await page.waitForTimeout(100)
+  await u.openAndClearDebugPanel()
+  await u.sendCustomCmd({
+    type: 'modeling_cmd_req',
+    cmd_id: uuidv4(),
+    cmd: {
+      type: 'default_camera_look_at',
+      vantage: { x: 0, y: -1250, z: 580 },
+      center: { x: 0, y: 0, z: 0 },
+      up: { x: 0, y: 0, z: 1 },
+    },
+  })
+  await page.waitForTimeout(100)
+  await u.sendCustomCmd({
+    type: 'modeling_cmd_req',
+    cmd_id: uuidv4(),
+    cmd: {
+      type: 'default_camera_get_settings',
+    },
+  })
+  await page.waitForTimeout(100)
+
+  const startPX = [665, 458]
+
+  const dragPX = 30
+
+  await page.getByText('startProfileAt([4.61, -14.01], %)').click()
+  await expect(page.getByRole('button', { name: 'Edit Sketch' })).toBeVisible()
+  await page.getByRole('button', { name: 'Edit Sketch' }).click()
+  await page.waitForTimeout(400)
+  let prevContent = await page.locator('.cm-content').innerText()
+
+  const step5 = { steps: 5 }
+
+  await expect(page.getByTestId('segment-overlay')).toHaveCount(2)
+
+  // drag startProfieAt handle
+  await page.mouse.move(startPX[0], startPX[1])
+  await page.mouse.down()
+  await page.mouse.move(startPX[0] + dragPX, startPX[1] - dragPX, step5)
+  await page.mouse.up()
+
+  await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+  prevContent = await page.locator('.cm-content').innerText()
+
+  // drag line handle
+  await page.waitForTimeout(100)
+
+  const lineEnd = await u.getBoundingBox('[data-overlay-index="0"]')
+  await page.mouse.move(lineEnd.x - 5, lineEnd.y)
+  await page.mouse.down()
+  await page.mouse.move(lineEnd.x + dragPX, lineEnd.y - dragPX, step5)
+  await page.mouse.up()
+  await page.waitForTimeout(100)
+  await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+  prevContent = await page.locator('.cm-content').innerText()
+
+  // drag tangentialArcTo handle
+  const tangentEnd = await u.getBoundingBox('[data-overlay-index="1"]')
+  await page.mouse.move(tangentEnd.x, tangentEnd.y - 5)
+  await page.mouse.down()
+  await page.mouse.move(tangentEnd.x + dragPX, tangentEnd.y - dragPX, step5)
+  await page.mouse.up()
+  await page.waitForTimeout(100)
+  await expect(page.locator('.cm-content')).not.toHaveText(prevContent)
+
+  // expect the code to have changed
+  await expect(page.locator('.cm-content'))
+    .toHaveText(`const sketch001 = startSketchOn('XZ')
+  |> startProfileAt([6.44, -12.07], %)
+  |> line([14.72, 2.01], %)
+  |> tangentialArcTo([24.95, -5.38], %)
+  |> line([1.97, 2.06], %)
+  |> close(%)
+  |> revolve({ axis: "X" }, %)`)
 })
 
 const doSnapAtDifferentScales = async (
@@ -3769,6 +4109,81 @@ const part002 = startSketchOn('XZ')
       })
     }
   })
+
+  test('Horizontally constrained line remains selected after applying constraint', async ({
+    page,
+  }) => {
+    await page.addInitScript(async () => {
+      localStorage.setItem(
+        'persistCode',
+        `const sketch001 = startSketchOn('XY')
+  |> startProfileAt([-1.05, -1.07], %)
+  |> line([3.79, 2.68], %, 'seg01')
+  |> line([3.13, -2.4], %)`
+      )
+    })
+    const u = await getUtils(page)
+    await page.setViewportSize({ width: 1200, height: 500 })
+    await page.goto('/')
+    await u.waitForAuthSkipAppStart()
+
+    await page.getByText("line([3.79, 2.68], %, 'seg01')").click()
+    await page.getByRole('button', { name: 'Edit Sketch' }).click()
+
+    await page.waitForTimeout(100)
+    const lineBefore = await u.getSegmentBodyCoords(
+      `[data-overlay-index="1"]`,
+      0
+    )
+    expect(
+      await u.getGreatestPixDiff(lineBefore, TEST_COLORS.WHITE)
+    ).toBeLessThan(3)
+    await page.mouse.move(lineBefore.x, lineBefore.y)
+    await page.waitForTimeout(50)
+    await page.mouse.click(lineBefore.x, lineBefore.y)
+    expect(
+      await u.getGreatestPixDiff(lineBefore, TEST_COLORS.BLUE)
+    ).toBeLessThan(3)
+
+    await page
+      .getByRole('button', {
+        name: 'Constrain',
+      })
+      .click()
+    await page.getByRole('button', { name: 'horizontal', exact: true }).click()
+
+    let activeLinesContent = await page.locator('.cm-activeLine').all()
+    await expect(activeLinesContent[0]).toHaveText(`|> xLine(3.13, %)`)
+
+    // If the overlay-angle is updated the THREE.js scene is in a good state
+    await expect(
+      await page.locator('[data-overlay-index="1"]')
+    ).toHaveAttribute('data-overlay-angle', '0')
+
+    const lineAfter = await u.getSegmentBodyCoords(
+      `[data-overlay-index="1"]`,
+      0
+    )
+    expect(
+      await u.getGreatestPixDiff(lineAfter, TEST_COLORS.BLUE)
+    ).toBeLessThan(3)
+
+    await page
+      .getByRole('button', {
+        name: 'Constrain',
+      })
+      .click()
+    await page.getByRole('button', { name: 'length', exact: true }).click()
+
+    await page.getByLabel('length Value').fill('10')
+    await page.getByRole('button', { name: 'Add constraining value' }).click()
+
+    activeLinesContent = await page.locator('.cm-activeLine').all()
+    await expect(activeLinesContent[0]).toHaveText(`|> xLine(length001, %)`)
+
+    // checking the count of the overlays is a good proxy check that the client sketch scene is in a good state
+    await expect(page.getByTestId('segment-overlay')).toHaveCount(2)
+  })
 })
 
 test.describe('Testing segment overlays', () => {

e2e/playwright/test-utils.ts

@@ -8,6 +8,13 @@ import { Protocol } from 'playwright-core/types/protocol'
 import type { Models } from '@kittycad/lib'
 import { APP_NAME } from 'lib/constants'
 
+type TestColor = [number, number, number]
+export const TEST_COLORS = {
+  WHITE: [249, 249, 249] as TestColor,
+  YELLOW: [255, 255, 0] as TestColor,
+  BLUE: [0, 0, 255] as TestColor,
+} as const
+
 async function waitForPageLoad(page: Page) {
   // wait for 'Loading stream...' spinner
   await page.getByTestId('loading-stream').waitFor()

package.json

@@ -1,6 +1,6 @@
 {
   "name": "untitled-app",
-  "version": "0.22.4",
+  "version": "0.22.5",
   "private": true,
   "dependencies": {
     "@codemirror/autocomplete": "^6.16.0",

src-tauri/Cargo.toml

@@ -20,7 +20,7 @@ kittycad = "0.3.5"
 log = "0.4.21"
 oauth2 = "4.4.2"
 serde_json = "1.0"
-tauri = { version = "2.0.0-beta.22", features = [ "devtools", "unstable"] }
+tauri = { version = "2.0.0-beta.15", features = [ "devtools", "unstable"] }
 tauri-plugin-cli = { version = "2.0.0-beta.3" }
 tauri-plugin-deep-link = { version = "2.0.0-beta.3" }
 tauri-plugin-dialog = { version = "2.0.0-beta.6" }

src-tauri/tauri.conf.json

@@ -63,17 +63,16 @@
       "subcommands": {}
     },
     "deep-link": {
-      "mobile": [],
+      "domains": [
-      "desktop": {
+        {
-        "schemes": [
+          "host": "app.zoo.dev"
-          "app.zoo.dev"
+        }
-        ]
+      ]
-      }
     },
     "shell": {
       "open": true
     }
   },
   "productName": "Zoo Modeling App",
-  "version": "0.22.4"
+  "version": "0.22.5"
 }

src/clientSideScene/sceneEntities.ts

@@ -73,7 +73,7 @@ import {
   changeSketchArguments,
   updateStartProfileAtArgs,
 } from 'lang/std/sketch'
-import { normaliseAngle, roundOff, throttle } from 'lib/utils'
+import { isOverlap, normaliseAngle, roundOff, throttle } from 'lib/utils'
 import {
   createArrayExpression,
   createCallExpressionStdLib,
@@ -83,6 +83,7 @@ import {
   findUniqueName,
 } from 'lang/modifyAst'
 import {
+  Selections,
   getEventForSegmentSelection,
   sendSelectEventToEngine,
 } from 'lib/selections'
@@ -300,6 +301,7 @@ export class SceneEntities {
     position,
     maybeModdedAst,
     draftExpressionsIndices,
+    selectionRanges,
   }: {
     sketchPathToNode: PathToNode
     maybeModdedAst: Program
@@ -307,6 +309,7 @@ export class SceneEntities {
     forward: [number, number, number]
     up: [number, number, number]
     position?: [number, number, number]
+    selectionRanges?: Selections
   }): Promise<{
     truncatedAst: Program
     programMemoryOverride: ProgramMemory
@@ -396,6 +399,12 @@ export class SceneEntities {
         draftExpressionsIndices &&
         index <= draftExpressionsIndices.end &&
         index >= draftExpressionsIndices.start
+      const isSelected = selectionRanges?.codeBasedSelections.some(
+        (selection) => {
+          return isOverlap(selection.range, segment.__geoMeta.sourceRange)
+        }
+      )
+
       let seg
       const callExpName = getNodeFromPath<CallExpression>(
         maybeModdedAst,
@@ -413,6 +422,7 @@ export class SceneEntities {
           scale: factor,
           texture: sceneInfra.extraSegmentTexture,
           theme: sceneInfra._theme,
+          isSelected,
         })
         callbacks.push(
           this.updateTangentialArcToSegment({
@@ -434,6 +444,7 @@ export class SceneEntities {
           callExpName,
           texture: sceneInfra.extraSegmentTexture,
           theme: sceneInfra._theme,
+          isSelected,
         })
         callbacks.push(
           this.updateStraightSegment({
@@ -1388,11 +1399,12 @@ export class SceneEntities {
       },
       onClick: async (args) => {
         const { streamDimensions } = useStore.getState()
-        const { entity_id, ...rest } = await sendSelectEventToEngine(
+        const { entity_id } = await sendSelectEventToEngine(
           args?.mouseEvent,
           document.getElementById('video-stream') as HTMLVideoElement,
           streamDimensions
         )
+
         let _entity_id = entity_id
         if (!_entity_id) return
         if (
@@ -1762,7 +1774,11 @@ export function sketchGroupFromPathToNode({
     pathToNode,
     'VariableDeclarator'
   ).node
-  return programMemory.root[varDec?.id?.name || ''] as SketchGroup
+  const result = programMemory.root[varDec?.id?.name || '']
+  if (result?.type === 'ExtrudeGroup') {
+    return result.sketchGroup
+  }
+  return result as SketchGroup
 }
 
 function colorSegment(object: any, color: number) {

src/clientSideScene/segments.ts

@@ -45,18 +45,21 @@ export function profileStart({
   pathToNode,
   scale = 1,
   theme,
+  isSelected,
 }: {
   from: Coords2d
   id: string
   pathToNode: PathToNode
   scale?: number
   theme: Themes
+  isSelected?: boolean
 }) {
   const group = new Group()
 
   const geometry = new BoxGeometry(12, 12, 12) // in pixels scaled later
   const baseColor = getThemeColorForThreeJs(theme)
-  const body = new MeshBasicMaterial({ color: baseColor })
+  const color = isSelected ? 0x0000ff : baseColor
+  const body = new MeshBasicMaterial({ color })
   const mesh = new Mesh(geometry, body)
 
   group.add(mesh)
@@ -66,7 +69,8 @@ export function profileStart({
     id,
     from,
     pathToNode,
-    isSelected: false,
+    isSelected,
+    baseColor,
   }
   group.name = PROFILE_START
   group.position.set(from[0], from[1], 0)
@@ -84,6 +88,7 @@ export function straightSegment({
   callExpName,
   texture,
   theme,
+  isSelected = false,
 }: {
   from: Coords2d
   to: Coords2d
@@ -94,6 +99,7 @@ export function straightSegment({
   callExpName: string
   texture: Texture
   theme: Themes
+  isSelected?: boolean
 }): Group {
   const group = new Group()
 
@@ -119,7 +125,8 @@ export function straightSegment({
 
   const baseColor =
     callExpName === 'close' ? 0x444444 : getThemeColorForThreeJs(theme)
-  const body = new MeshBasicMaterial({ color: baseColor })
+  const color = isSelected ? 0x0000ff : baseColor
+  const body = new MeshBasicMaterial({ color })
   const mesh = new Mesh(geometry, body)
   mesh.userData.type = isDraftSegment
     ? STRAIGHT_SEGMENT_DASH
@@ -132,7 +139,7 @@ export function straightSegment({
     from,
     to,
     pathToNode,
-    isSelected: false,
+    isSelected,
     callExpName,
     baseColor,
   }
@@ -141,7 +148,7 @@ export function straightSegment({
   const length = Math.sqrt(
     Math.pow(to[0] - from[0], 2) + Math.pow(to[1] - from[1], 2)
   )
-  const arrowGroup = createArrowhead(scale, theme)
+  const arrowGroup = createArrowhead(scale, theme, color)
   arrowGroup.position.set(to[0], to[1], 0)
   const dir = new Vector3()
     .subVectors(new Vector3(to[0], to[1], 0), new Vector3(from[0], from[1], 0))
@@ -169,9 +176,10 @@ export function straightSegment({
   return group
 }
 
-function createArrowhead(scale = 1, theme: Themes): Group {
+function createArrowhead(scale = 1, theme: Themes, color?: number): Group {
+  const baseColor = getThemeColorForThreeJs(theme)
   const arrowMaterial = new MeshBasicMaterial({
-    color: getThemeColorForThreeJs(theme),
+    color: color || baseColor,
   })
   // specify the size of the geometry in pixels (i.e. cone height = 20px, cone radius = 4.5px)
   // we'll scale the group to the correct size later to match these sizes in screen space
@@ -232,6 +240,7 @@ export function tangentialArcToSegment({
   scale = 1,
   texture,
   theme,
+  isSelected,
 }: {
   prevSegment: SketchGroup['value'][number]
   from: Coords2d
@@ -242,6 +251,7 @@ export function tangentialArcToSegment({
   scale?: number
   texture: Texture
   theme: Themes
+  isSelected?: boolean
 }): Group {
   const group = new Group()
 
@@ -273,7 +283,8 @@ export function tangentialArcToSegment({
   })
 
   const baseColor = getThemeColorForThreeJs(theme)
-  const body = new MeshBasicMaterial({ color: baseColor })
+  const color = isSelected ? 0x0000ff : baseColor
+  const body = new MeshBasicMaterial({ color })
   const mesh = new Mesh(geometry, body)
   mesh.userData.type = isDraftSegment
     ? TANGENTIAL_ARC_TO__SEGMENT_DASH
@@ -286,12 +297,12 @@ export function tangentialArcToSegment({
     to,
     prevSegment,
     pathToNode,
-    isSelected: false,
+    isSelected,
     baseColor,
   }
   group.name = TANGENTIAL_ARC_TO_SEGMENT
 
-  const arrowGroup = createArrowhead(scale, theme)
+  const arrowGroup = createArrowhead(scale, theme, color)
   arrowGroup.position.set(to[0], to[1], 0)
   const arrowheadAngle = endAngle + (Math.PI / 2) * (ccw ? 1 : -1)
   arrowGroup.quaternion.setFromUnitVectors(

src/components/ModelingMachineProvider.tsx

@@ -275,9 +275,9 @@ export const ModelingMachineProvider = ({
         ),
         'Set selection': assign(({ selectionRanges, sketchDetails }, event) => {
           const setSelections = event.data as SetSelections // this was needed for ts after adding 'Set selection' action to on done modal events
-          if (!editorManager.editorView) return {}
           const dispatchSelection = (selection?: EditorSelection) => {
             if (!selection) return // TODO less of hack for the below please
+            if (!editorManager.editorView) return
             editorManager.lastSelectionEvent = Date.now()
             setTimeout(() => {
               if (editorManager.editorView) {
@@ -507,7 +507,6 @@ export const ModelingMachineProvider = ({
         },
         'animate-to-face': async (_, { data }) => {
           if (data.type === 'extrudeFace') {
-            console.log('data', data)
             const { modifiedAst, pathToNode: pathToNewSketchNode } =
               sketchOnExtrudedFace(
                 kclManager.ast,

src/editor/manager.ts

@@ -160,9 +160,6 @@ export default class EditorManager {
     if (selections.codeBasedSelections.length === 0) {
       return
     }
-    if (!this.editorView) {
-      return
-    }
     let codeBasedSelections = []
     for (const selection of selections.codeBasedSelections) {
       codeBasedSelections.push(
@@ -177,6 +174,9 @@ export default class EditorManager {
         ].range[1]
       )
     )
+    if (!this.editorView) {
+      return
+    }
     this.editorView.dispatch({
       selection: EditorSelection.create(codeBasedSelections, 1),
     })

src/lang/artifact.test.ts

@@ -86,32 +86,36 @@ const mySketch001 = startSketchOn('XY')
           sourceRange: [108, 132],
         },
       ],
-      sketchGroupValues: [
+      sketchGroup: {
-        {
+        id: expect.any(String),
-          type: 'ToPoint',
+        __meta: expect.any(Array),
-          from: [0, 0],
+        on: expect.any(Object),
-          to: [-1.59, -1.54],
+        start: expect.any(Object),
-          name: '',
+        type: 'SketchGroup',
-          __geoMeta: {
+        value: [
-            id: expect.any(String),
+          {
-            sourceRange: [77, 102],
+            type: 'ToPoint',
+            from: [0, 0],
+            to: [-1.59, -1.54],
+            name: '',
+            __geoMeta: {
+              id: expect.any(String),
+              sourceRange: [77, 102],
+            },
           },
-        },
+          {
-        {
+            type: 'ToPoint',
-          type: 'ToPoint',
+            from: [-1.59, -1.54],
-          from: [-1.59, -1.54],
+            to: [0.46, -5.82],
-          to: [0.46, -5.82],
+            name: '',
-          name: '',
+            __geoMeta: {
-          __geoMeta: {
+              id: expect.any(String),
-            id: expect.any(String),
+              sourceRange: [108, 132],
-            sourceRange: [108, 132],
+            },
           },
-        },
+        ],
-      ],
+      },
       height: 2,
-      xAxis: { x: 1, y: 0, z: 0 },
-      yAxis: { x: 0, y: 1, z: 0 },
-      zAxis: { x: 0, y: 0, z: 1 },
       startCapId: expect.any(String),
       endCapId: expect.any(String),
       __meta: [{ sourceRange: [46, 71] }],
@@ -170,42 +174,46 @@ const sk2 = startSketchOn('XY')
             sourceRange: [124, 143],
           },
         ],
-        sketchGroupValues: [
+        sketchGroup: {
-          {
+          id: expect.any(String),
-            type: 'ToPoint',
+          __meta: expect.any(Array),
-            from: [0, 0],
+          on: expect.any(Object),
-            to: [-2.5, 0],
+          start: expect.any(Object),
-            name: '',
+          type: 'SketchGroup',
-            __geoMeta: {
+          value: [
-              id: expect.any(String),
+            {
-              sourceRange: [69, 89],
+              type: 'ToPoint',
+              from: [0, 0],
+              to: [-2.5, 0],
+              name: '',
+              __geoMeta: {
+                id: expect.any(String),
+                sourceRange: [69, 89],
+              },
             },
-          },
+            {
-          {
+              type: 'ToPoint',
-            type: 'ToPoint',
+              from: [-2.5, 0],
-            from: [-2.5, 0],
+              to: [0, 10],
-            to: [0, 10],
+              name: 'p',
-            name: 'p',
+              __geoMeta: {
-            __geoMeta: {
+                id: expect.any(String),
-              id: expect.any(String),
+                sourceRange: [95, 118],
-              sourceRange: [95, 118],
+              },
             },
-          },
+            {
-          {
+              type: 'ToPoint',
-            type: 'ToPoint',
+              from: [0, 10],
-            from: [0, 10],
+              to: [2.5, 0],
-            to: [2.5, 0],
+              name: '',
-            name: '',
+              __geoMeta: {
-            __geoMeta: {
+                id: expect.any(String),
-              id: expect.any(String),
+                sourceRange: [124, 143],
-              sourceRange: [124, 143],
+              },
             },
-          },
+          ],
-        ],
+        },
         height: 2,
-        xAxis: { x: 1, y: 0, z: 0 },
-        yAxis: { x: 0, y: 1, z: 0 },
-        zAxis: { x: 0, y: 0, z: 1 },
         startCapId: expect.any(String),
         endCapId: expect.any(String),
         __meta: [{ sourceRange: [38, 63] }],
@@ -236,42 +244,46 @@ const sk2 = startSketchOn('XY')
             sourceRange: [428, 447],
           },
         ],
-        sketchGroupValues: [
+        sketchGroup: {
-          {
+          id: expect.any(String),
-            type: 'ToPoint',
+          __meta: expect.any(Array),
-            from: [0, 0],
+          on: expect.any(Object),
-            to: [-2.5, 0],
+          start: expect.any(Object),
-            name: '',
+          type: 'SketchGroup',
-            __geoMeta: {
+          value: [
-              id: expect.any(String),
+            {
-              sourceRange: [374, 394],
+              type: 'ToPoint',
+              from: [0, 0],
+              to: [-2.5, 0],
+              name: '',
+              __geoMeta: {
+                id: expect.any(String),
+                sourceRange: [374, 394],
+              },
             },
-          },
+            {
-          {
+              type: 'ToPoint',
-            type: 'ToPoint',
+              from: [-2.5, 0],
-            from: [-2.5, 0],
+              to: [0, 3],
-            to: [0, 3],
+              name: 'p',
-            name: 'p',
+              __geoMeta: {
-            __geoMeta: {
+                id: expect.any(String),
-              id: expect.any(String),
+                sourceRange: [400, 422],
-              sourceRange: [400, 422],
+              },
             },
-          },
+            {
-          {
+              type: 'ToPoint',
-            type: 'ToPoint',
+              from: [0, 3],
-            from: [0, 3],
+              to: [2.5, 0],
-            to: [2.5, 0],
+              name: '',
-            name: '',
+              __geoMeta: {
-            __geoMeta: {
+                id: expect.any(String),
-              id: expect.any(String),
+                sourceRange: [428, 447],
-              sourceRange: [428, 447],
+              },
             },
-          },
+          ],
-        ],
+        },
         height: 2,
-        xAxis: { x: 1, y: 0, z: 0 },
-        yAxis: { x: 0, y: 1, z: 0 },
-        zAxis: { x: 0, y: 0, z: 1 },
         startCapId: expect.any(String),
         endCapId: expect.any(String),
         __meta: [{ sourceRange: [343, 368] }],

src/lang/queryAst.ts

@@ -661,14 +661,6 @@ export function isSingleCursorInPipe(
   ast: Program
 ) {
   if (selectionRanges.codeBasedSelections.length !== 1) return false
-  if (
-    doesPipeHaveCallExp({
-      ast,
-      selection: selectionRanges.codeBasedSelections[0],
-      calleeName: 'extrude',
-    })
-  )
-    return false
   const selection = selectionRanges.codeBasedSelections[0]
   const pathToNode = getNodePathFromSourceRange(ast, selection.range)
   const nodeTypes = pathToNode.map(([, type]) => type)

src/lang/std/sketchcombos.ts

@@ -1583,7 +1583,10 @@ export function transformAstSketchLines({
     })
 
     const varName = varDec.id.name
-    const sketchGroup = programMemory.root?.[varName]
+    let sketchGroup = programMemory.root?.[varName]
+    if (sketchGroup.type === 'ExtrudeGroup') {
+      sketchGroup = sketchGroup.sketchGroup
+    }
     if (!sketchGroup || sketchGroup.type !== 'SketchGroup')
       throw new Error('not a sketch group')
     const seg = getSketchSegmentFromPathToNode(

src/lang/util.ts

@@ -59,9 +59,11 @@ export function isCursorInSketchCommandRange(
           artifact.commandType === 'close_path')
     )
   )
-  return overlapingEntries.length && overlapingEntries[0][1].parentId
+  let result =
-    ? overlapingEntries[0][1].parentId
+    overlapingEntries.length && overlapingEntries[0][1].parentId
-    : overlapingEntries.find(
+      ? overlapingEntries[0][1].parentId
-        ([, artifact]) => artifact.commandType === 'start_path'
+      : overlapingEntries.find(
-      )?.[0] || false
+          ([, artifact]) => artifact.commandType === 'start_path'
+        )?.[0] || false
+  return result
 }

src/lib/selections.ts

@@ -278,7 +278,7 @@ export function processCodeMirrorRanges({
   }
 }
 
-function updateSceneObjectColors(codeBasedSelections: Selection[]) {
+export function updateSceneObjectColors(codeBasedSelections: Selection[]) {
   let updated: Program
   try {
     updated = parse(recast(kclManager.ast))
@@ -301,6 +301,7 @@ function updateSceneObjectColors(codeBasedSelections: Selection[]) {
     const groupHasCursor = codeBasedSelections.some((selection) => {
       return isOverlap(selection.range, [node.start, node.end])
     })
+
     const color = groupHasCursor
       ? 0x0000ff
       : segmentGroup?.userData?.baseColor || 0xffffff

src/machines/modelingMachine.ts

@@ -900,7 +900,10 @@ export const modelingMachine = createMachine(
           sceneInfra.modelingSend('Equip Line tool')
         }
       },
-      'setup client side sketch segments': ({ sketchDetails }) => {
+      'setup client side sketch segments': ({
+        sketchDetails,
+        selectionRanges,
+      }) => {
         if (!sketchDetails) return
         ;(async () => {
           if (Object.keys(sceneEntitiesManager.activeSegments).length > 0) {
@@ -913,6 +916,7 @@ export const modelingMachine = createMachine(
             up: sketchDetails.yAxis,
             position: sketchDetails.origin,
             maybeModdedAst: kclManager.ast,
+            selectionRanges,
           })
           sceneInfra.resetMouseListeners()
           sceneEntitiesManager.setupSketchIdleCallbacks({

src/wasm-lib/kcl/src/executor.rs

@@ -570,16 +570,10 @@ pub struct ExtrudeGroup {
     pub id: uuid::Uuid,
     /// The extrude surfaces.
     pub value: Vec<ExtrudeSurface>,
-    /// The sketch group paths.
+    /// The sketch group.
-    pub sketch_group_values: Vec<Path>,
+    pub sketch_group: SketchGroup,
     /// The height of the extrude group.
     pub height: f64,
-    /// The x-axis of the extrude group base plane in the 3D space
-    pub x_axis: Point3d,
-    /// The y-axis of the extrude group base plane in the 3D space
-    pub y_axis: Point3d,
-    /// The z-axis of the extrude group base plane in the 3D space
-    pub z_axis: Point3d,
     /// The id of the extrusion start cap
     pub start_cap_id: Option<uuid::Uuid>,
     /// The id of the extrusion end cap

src/wasm-lib/kcl/src/std/chamfer.rs

@@ -94,7 +94,8 @@ async fn inner_chamfer(
             EdgeReference::Uuid(uuid) => uuid,
             EdgeReference::Tag(tag) => {
                 extrude_group
-                    .sketch_group_values
+                    .sketch_group
+                    .value
                     .iter()
                     .find(|p| p.get_name() == tag)
                     .ok_or_else(|| {

src/wasm-lib/kcl/src/std/extrude.rs

@@ -239,11 +239,8 @@ pub(crate) async fn do_post_extrude(
         // sketch group.
         id: sketch_group.id,
         value: new_value,
-        sketch_group_values: sketch_group.value.clone(),
+        sketch_group: sketch_group.clone(),
         height: length,
-        x_axis: sketch_group.on.x_axis(),
-        y_axis: sketch_group.on.y_axis(),
-        z_axis: sketch_group.on.z_axis(),
         start_cap_id,
         end_cap_id,
         meta: sketch_group.meta,

src/wasm-lib/kcl/src/std/fillet.rs

@@ -95,7 +95,8 @@ async fn inner_fillet(
             EdgeReference::Uuid(uuid) => uuid,
             EdgeReference::Tag(tag) => {
                 extrude_group
-                    .sketch_group_values
+                    .sketch_group
+                    .value
                     .iter()
                     .find(|p| p.get_name() == tag)
                     .ok_or_else(|| {
@@ -177,7 +178,8 @@ async fn inner_get_opposite_edge(tag: String, extrude_group: Box<ExtrudeGroup>,
         return Ok(Uuid::new_v4());
     }
     let tagged_path = extrude_group
-        .sketch_group_values
+        .sketch_group
+        .value
         .iter()
         .find(|p| p.get_name() == tag)
         .ok_or_else(|| {
@@ -268,7 +270,8 @@ async fn inner_get_next_adjacent_edge(
         return Ok(Uuid::new_v4());
     }
     let tagged_path = extrude_group
-        .sketch_group_values
+        .sketch_group
+        .value
         .iter()
         .find(|p| p.get_name() == tag)
         .ok_or_else(|| {
@@ -364,7 +367,8 @@ async fn inner_get_previous_adjacent_edge(
         return Ok(Uuid::new_v4());
     }
     let tagged_path = extrude_group
-        .sketch_group_values
+        .sketch_group
+        .value
         .iter()
         .find(|p| p.get_name() == tag)
         .ok_or_else(|| {

src/wasm-lib/kcl/src/std/revolve.rs

@@ -336,7 +336,8 @@ async fn inner_get_edge(tag: String, extrude_group: Box<ExtrudeGroup>, args: Arg
         return Ok(Uuid::new_v4());
     }
     let tagged_path = extrude_group
-        .sketch_group_values
+        .sketch_group
+        .value
         .iter()
         .find(|p| p.get_name() == tag)
         .ok_or_else(|| {

src/wasm-lib/kcl/src/std/sketch.rs

@@ -1074,9 +1074,9 @@ async fn start_sketch_on_face(
         value: tag.to_string(),
         sketch_group_id: extrude_group.id,
         // TODO: get this from the extrude plane data.
-        x_axis: extrude_group.x_axis,
+        x_axis: extrude_group.sketch_group.on.x_axis(),
-        y_axis: extrude_group.y_axis,
+        y_axis: extrude_group.sketch_group.on.y_axis(),
-        z_axis: extrude_group.z_axis,
+        z_axis: extrude_group.sketch_group.on.z_axis(),
         meta: vec![args.source_range.into()],
     }))
 }