Update docs

YOYO NEW API SPEC!

Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>

docs/kcl/angleToMatchLengthX.md

@@ -9,7 +9,7 @@ Returns the angle to match the given length for x.
 
 
 ```js
-angleToMatchLengthX(segment_name: TagIdentifier, to: number, sketch_group: SketchGroup) -> number
+angleToMatchLengthX(tag: TagIdentifier, to: number, sketch_group: SketchGroup) -> number
 ```
 
 ### Examples
@@ -28,9 +28,95 @@ const extrusion = extrude(5, sketch001)
 
 ### Arguments
 
-* `segment_name`: `TagIdentifier` (REQUIRED)
+* `tag`: `TagIdentifier` (REQUIRED)
 ```js
 {
+	// Engine information for a tag.
+	info: {
+	// The id of the tagged object.
+	id: uuid,
+	// The path the tag is on.
+	path: {
+	// The from point.
+	from: [number, number],
+	// The tag of the path.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	// The to point.
+	to: [number, number],
+},
+	// The sketch group the tag is on.
+	sketchGroup: uuid,
+	// The surface information for the tag.
+	surface: {
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "extrudePlane",
+} |
+{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
+},
+},
 	value: string,
 }
 ```
@@ -38,7 +124,7 @@ const extrusion = extrude(5, sketch001)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -80,15 +166,21 @@ const extrusion = extrude(5, sketch001)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -106,7 +198,7 @@ const extrusion = extrude(5, sketch001)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -257,6 +349,38 @@ const extrusion = extrude(5, sketch001)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/angleToMatchLengthY.md

@@ -9,7 +9,7 @@ Returns the angle to match the given length for y.
 
 
 ```js
-angleToMatchLengthY(segment_name: TagIdentifier, to: number, sketch_group: SketchGroup) -> number
+angleToMatchLengthY(tag: TagIdentifier, to: number, sketch_group: SketchGroup) -> number
 ```
 
 ### Examples
@@ -32,9 +32,95 @@ const extrusion = extrude(5, sketch001)
 
 ### Arguments
 
-* `segment_name`: `TagIdentifier` (REQUIRED)
+* `tag`: `TagIdentifier` (REQUIRED)
 ```js
 {
+	// Engine information for a tag.
+	info: {
+	// The id of the tagged object.
+	id: uuid,
+	// The path the tag is on.
+	path: {
+	// The from point.
+	from: [number, number],
+	// The tag of the path.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	// The to point.
+	to: [number, number],
+},
+	// The sketch group the tag is on.
+	sketchGroup: uuid,
+	// The surface information for the tag.
+	surface: {
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "extrudePlane",
+} |
+{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
+},
+},
 	value: string,
 }
 ```
@@ -42,7 +128,7 @@ const extrusion = extrude(5, sketch001)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -84,15 +170,21 @@ const extrusion = extrude(5, sketch001)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -110,7 +202,7 @@ const extrusion = extrude(5, sketch001)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -261,6 +353,38 @@ const extrusion = extrude(5, sketch001)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/angledLine.md

@@ -33,7 +33,7 @@ const example = extrude(10, exampleSketch)
 * `data`: `AngledLineData` - Data to draw an angled line. (REQUIRED)
 ```js
 {
-	// The angle of the line.
+	// The angle of the line (in degrees).
 	angle: number,
 	// The length of the line.
 	length: number,
@@ -43,7 +43,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -85,15 +85,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -111,7 +117,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -262,6 +268,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -417,7 +455,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -459,15 +497,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -485,7 +529,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -636,6 +680,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/angledLineOfXLength.md

@@ -32,7 +32,7 @@ const extrusion = extrude(10, sketch001)
 * `data`: `AngledLineData` - Data to draw an angled line. (REQUIRED)
 ```js
 {
-	// The angle of the line.
+	// The angle of the line (in degrees).
 	angle: number,
 	// The length of the line.
 	length: number,
@@ -42,7 +42,7 @@ const extrusion = extrude(10, sketch001)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -84,15 +84,21 @@ const extrusion = extrude(10, sketch001)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -110,7 +116,7 @@ const extrusion = extrude(10, sketch001)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -261,6 +267,38 @@ const extrusion = extrude(10, sketch001)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -416,7 +454,7 @@ const extrusion = extrude(10, sketch001)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -458,15 +496,21 @@ const extrusion = extrude(10, sketch001)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -484,7 +528,7 @@ const extrusion = extrude(10, sketch001)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -635,6 +679,38 @@ const extrusion = extrude(10, sketch001)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/angledLineOfYLength.md

@@ -34,7 +34,7 @@ const example = extrude(10, exampleSketch)
 * `data`: `AngledLineData` - Data to draw an angled line. (REQUIRED)
 ```js
 {
-	// The angle of the line.
+	// The angle of the line (in degrees).
 	angle: number,
 	// The length of the line.
 	length: number,
@@ -44,7 +44,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -86,15 +86,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -112,7 +118,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -263,6 +269,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -418,7 +456,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -460,15 +498,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -486,7 +530,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -637,6 +681,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/angledLineThatIntersects.md

@@ -22,7 +22,7 @@ const exampleSketch = startSketchOn('XZ')
   |> lineTo([0, 20], %)
   |> angledLineThatIntersects({
        angle: 80,
-       intersectTag: 'lineToIntersect',
+       intersectTag: lineToIntersect,
        offset: 10
      }, %)
   |> close(%)
@@ -41,6 +41,92 @@ const example = extrude(10, exampleSketch)
 	angle: number,
 	// The tag of the line to intersect with.
 	intersectTag: {
+	// Engine information for a tag.
+	info: {
+	// The id of the tagged object.
+	id: uuid,
+	// The path the tag is on.
+	path: {
+	// The from point.
+	from: [number, number],
+	// The tag of the path.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	// The to point.
+	to: [number, number],
+},
+	// The sketch group the tag is on.
+	sketchGroup: uuid,
+	// The surface information for the tag.
+	surface: {
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "extrudePlane",
+} |
+{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
+},
+},
 	value: string,
 },
 	// The offset from the intersecting line.
@@ -50,7 +136,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -92,15 +178,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -118,7 +210,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -269,6 +361,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -424,7 +548,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -466,15 +590,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -492,7 +622,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -643,6 +773,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/angledLineToX.md

@@ -41,7 +41,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -83,15 +83,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -109,7 +115,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -260,6 +266,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -415,7 +453,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -457,15 +495,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -483,7 +527,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -634,6 +678,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/angledLineToY.md

@@ -41,7 +41,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -83,15 +83,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -109,7 +115,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -260,6 +266,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -415,7 +453,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -457,15 +495,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -483,7 +527,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -634,6 +678,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/arc.md

@@ -19,8 +19,8 @@ const exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> line([10, 0], %)
   |> arc({
-       angle_start: 0,
-       angle_end: 280,
+       angleStart: 0,
+       angleEnd: 280,
        radius: 16
      }, %)
   |> close(%)
@@ -34,9 +34,9 @@ const exampleSketch = startSketchOn('XZ')
 ```js
 {
 	// The end angle.
-	angle_end: number,
+	angleEnd: number,
 	// The start angle.
-	angle_start: number,
+	angleStart: number,
 	// The radius.
 	radius: number,
 } |
@@ -52,7 +52,7 @@ const exampleSketch = startSketchOn('XZ')
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -94,15 +94,21 @@ const exampleSketch = startSketchOn('XZ')
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -120,7 +126,7 @@ const exampleSketch = startSketchOn('XZ')
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -271,6 +277,38 @@ const exampleSketch = startSketchOn('XZ')
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -426,7 +464,7 @@ const exampleSketch = startSketchOn('XZ')
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -468,15 +506,21 @@ const exampleSketch = startSketchOn('XZ')
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -494,7 +538,7 @@ const exampleSketch = startSketchOn('XZ')
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -645,6 +689,38 @@ const exampleSketch = startSketchOn('XZ')
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/bezierCurve.md

@@ -47,7 +47,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -89,15 +89,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -115,7 +121,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -266,6 +272,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -421,7 +459,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -463,15 +501,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -489,7 +533,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -640,6 +684,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/chamfer.md

@@ -31,10 +31,10 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
   |> chamfer({
        length: chamferLength,
        tags: [
-         getNextAdjacentEdge(edge1, %),
-         getNextAdjacentEdge(edge2, %),
-         getNextAdjacentEdge(edge3, %),
-         getNextAdjacentEdge(edge4, %)
+         getNextAdjacentEdge(edge1),
+         getNextAdjacentEdge(edge2),
+         getNextAdjacentEdge(edge3),
+         getNextAdjacentEdge(edge4)
        ]
      }, %)
 ```
@@ -51,6 +51,92 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	// The tags of the paths you want to chamfer.
 	tags: [uuid |
 {
+	// Engine information for a tag.
+	info: {
+	// The id of the tagged object.
+	id: uuid,
+	// The path the tag is on.
+	path: {
+	// The from point.
+	from: [number, number],
+	// The tag of the path.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	// The to point.
+	to: [number, number],
+},
+	// The sketch group the tag is on.
+	sketchGroup: uuid,
+	// The surface information for the tag.
+	surface: {
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "extrudePlane",
+} |
+{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
+},
+},
 	value: string,
 }],
 }
@@ -63,15 +149,21 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -89,7 +181,7 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -131,15 +223,21 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -191,6 +289,38 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -364,6 +494,38 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 }
 ```
@@ -387,15 +549,21 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -413,7 +581,7 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -455,15 +623,21 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -515,6 +689,38 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -688,6 +894,38 @@ const mountingPlate = extrude(thickness, mountingPlateSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 }
 ```

docs/kcl/circle.md

@@ -82,15 +82,21 @@ const example = extrude(5, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -108,7 +114,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -259,6 +265,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -286,7 +324,7 @@ const example = extrude(5, exampleSketch)
 },
 } |
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -328,15 +366,21 @@ const example = extrude(5, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -388,6 +432,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -543,7 +619,7 @@ const example = extrude(5, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -585,15 +661,21 @@ const example = extrude(5, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -611,7 +693,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -762,6 +844,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/close.md

@@ -15,7 +15,7 @@ close(sketch_group: SketchGroup, tag?: TagDeclarator) -> SketchGroup
 ### Examples
 
 ```js
-startSketchOn('XZ')
+const exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> line([10, 10], %)
   |> line([10, 0], %)
@@ -42,7 +42,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -84,15 +84,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -110,7 +116,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -261,6 +267,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -416,7 +454,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -458,15 +496,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -484,7 +528,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -635,6 +679,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/extrude.md

@@ -19,8 +19,8 @@ const example = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> line([10, 0], %)
   |> arc({
-       angle_end: 0,
-       angle_start: 120,
+       angleStart: 120,
+       angleEnd: 0,
        radius: 5
      }, %)
   |> line([5, 0], %)
@@ -41,8 +41,8 @@ const example = startSketchOn('XZ')
 const exampleSketch = startSketchOn('XZ')
   |> startProfileAt([-10, 0], %)
   |> arc({
-       angle_end: -60,
-       angle_start: 120,
+       angleStart: 120,
+       angleEnd: -60,
        radius: 5
      }, %)
   |> line([10, 0], %)
@@ -67,7 +67,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group_set`: `SketchGroupSet` - A sketch group or a group of sketch groups. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -109,15 +109,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -135,7 +141,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -286,6 +292,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -441,15 +479,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -467,7 +511,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -509,15 +553,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -569,6 +619,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -743,6 +825,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 } |
 {

docs/kcl/helix.md

@@ -19,10 +19,9 @@ const part001 = startSketchOn('XY')
   |> circle([5, 5], 10, %)
   |> extrude(10, %)
   |> helix({
-       angle_start: 0,
+       angleStart: 0,
        ccw: true,
-       revolutions: 16,
-       angle_start: 0
+       revolutions: 16
      }, %)
 ```
 
@@ -34,7 +33,7 @@ const part001 = startSketchOn('XY')
 ```js
 {
 	// Start angle (in degrees).
-	angle_start: number,
+	angleStart: number,
 	// Is the helix rotation counter clockwise? The default is `false`.
 	ccw: string,
 	// Length of the helix. If this argument is not provided, the height of the extrude group is used.
@@ -51,15 +50,21 @@ const part001 = startSketchOn('XY')
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -77,7 +82,7 @@ const part001 = startSketchOn('XY')
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -119,15 +124,21 @@ const part001 = startSketchOn('XY')
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -179,6 +190,38 @@ const part001 = startSketchOn('XY')
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -352,6 +395,38 @@ const part001 = startSketchOn('XY')
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 }
 ```
@@ -366,15 +441,21 @@ const part001 = startSketchOn('XY')
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -392,7 +473,7 @@ const part001 = startSketchOn('XY')
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -434,15 +515,21 @@ const part001 = startSketchOn('XY')
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -494,6 +581,38 @@ const part001 = startSketchOn('XY')
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -667,6 +786,38 @@ const part001 = startSketchOn('XY')
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 }
 ```

docs/kcl/hole.md

@@ -53,7 +53,7 @@ const example = extrude(1, exampleSketch)
 * `hole_sketch_group`: `SketchGroupSet` - A sketch group or a group of sketch groups. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -95,15 +95,21 @@ const example = extrude(1, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -121,7 +127,7 @@ const example = extrude(1, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -272,6 +278,38 @@ const example = extrude(1, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -419,7 +457,7 @@ const example = extrude(1, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -461,15 +499,21 @@ const example = extrude(1, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -487,7 +531,7 @@ const example = extrude(1, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -638,6 +682,38 @@ const example = extrude(1, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -784,7 +860,7 @@ const example = extrude(1, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -826,15 +902,21 @@ const example = extrude(1, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -852,7 +934,7 @@ const example = extrude(1, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -1003,6 +1085,38 @@ const example = extrude(1, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/index.md

@@ -20,6 +20,11 @@ layout: manual
 * [`angledLineToY`](kcl/angledLineToY)
 * [`arc`](kcl/arc)
 * [`asin`](kcl/asin)
+* [`assert`](kcl/assert)
+* [`assertGreaterThan`](kcl/assertGreaterThan)
+* [`assertGreaterThanOrEq`](kcl/assertGreaterThanOrEq)
+* [`assertLessThan`](kcl/assertLessThan)
+* [`assertLessThanOrEq`](kcl/assertLessThanOrEq)
 * [`atan`](kcl/atan)
 * [`bezierCurve`](kcl/bezierCurve)
 * [`ceil`](kcl/ceil)
@@ -31,13 +36,13 @@ layout: manual
 * [`extrude`](kcl/extrude)
 * [`fillet`](kcl/fillet)
 * [`floor`](kcl/floor)
-* [`getEdge`](kcl/getEdge)
 * [`getNextAdjacentEdge`](kcl/getNextAdjacentEdge)
 * [`getOppositeEdge`](kcl/getOppositeEdge)
 * [`getPreviousAdjacentEdge`](kcl/getPreviousAdjacentEdge)
 * [`helix`](kcl/helix)
 * [`hole`](kcl/hole)
 * [`import`](kcl/import)
+* [`int`](kcl/int)
 * [`lastSegX`](kcl/lastSegX)
 * [`lastSegY`](kcl/lastSegY)
 * [`legAngX`](kcl/legAngX)
@@ -57,6 +62,7 @@ layout: manual
 * [`patternLinear3d`](kcl/patternLinear3d)
 * [`patternTransform`](kcl/patternTransform)
 * [`pi`](kcl/pi)
+* [`polar`](kcl/polar)
 * [`pow`](kcl/pow)
 * [`profileStart`](kcl/profileStart)
 * [`profileStartX`](kcl/profileStartX)

docs/kcl/lastSegX.md

@@ -33,7 +33,7 @@ const example = extrude(5, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -75,15 +75,21 @@ const example = extrude(5, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -101,7 +107,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -252,6 +258,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/lastSegY.md

@@ -33,7 +33,7 @@ const example = extrude(5, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -75,15 +75,21 @@ const example = extrude(5, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -101,7 +107,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -252,6 +258,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/line.md

@@ -46,7 +46,7 @@ const example = extrude(5, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -88,15 +88,21 @@ const example = extrude(5, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -114,7 +120,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -265,6 +271,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -420,7 +458,7 @@ const example = extrude(5, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -462,15 +500,21 @@ const example = extrude(5, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -488,7 +532,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -639,6 +683,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/lineTo.md

@@ -33,7 +33,7 @@ const example = extrude(5, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -75,15 +75,21 @@ const example = extrude(5, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -101,7 +107,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -252,6 +258,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -407,7 +445,7 @@ const example = extrude(5, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -449,15 +487,21 @@ const example = extrude(5, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -475,7 +519,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -626,6 +670,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/patternCircular2d.md

@@ -51,7 +51,7 @@ const example = extrude(1, exampleSketch)
 * `sketch_group_set`: `SketchGroupSet` - A sketch group or a group of sketch groups. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -93,15 +93,21 @@ const example = extrude(1, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -119,7 +125,7 @@ const example = extrude(1, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -270,6 +276,38 @@ const example = extrude(1, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/patternCircular3d.md

@@ -55,15 +55,21 @@ const example = extrude(-5, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -81,7 +87,7 @@ const example = extrude(-5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -123,15 +129,21 @@ const example = extrude(-5, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -183,6 +195,38 @@ const example = extrude(-5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -357,6 +401,38 @@ const example = extrude(-5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 } |
 {

docs/kcl/patternLinear2d.md

@@ -44,7 +44,7 @@ const example = extrude(1, exampleSketch)
 * `sketch_group_set`: `SketchGroupSet` - A sketch group or a group of sketch groups. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -86,15 +86,21 @@ const example = extrude(1, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -112,7 +118,7 @@ const example = extrude(1, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -263,6 +269,38 @@ const example = extrude(1, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/patternLinear3d.md

@@ -53,15 +53,21 @@ const example = extrude(1, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -79,7 +85,7 @@ const example = extrude(1, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -121,15 +127,21 @@ const example = extrude(1, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -181,6 +193,38 @@ const example = extrude(1, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -355,6 +399,38 @@ const example = extrude(1, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 } |
 {

docs/kcl/patternTransform.md

@@ -55,15 +55,21 @@ let vase = layer()
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -81,7 +87,7 @@ let vase = layer()
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -123,15 +129,21 @@ let vase = layer()
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -183,6 +195,38 @@ let vase = layer()
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -357,6 +401,38 @@ let vase = layer()
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 } |
 {

docs/kcl/profileStart.md

@@ -19,7 +19,7 @@ const sketch001 = startSketchOn('XY')
   |> startProfileAt([5, 2], %)
   |> angledLine({ angle: 120, length: 50 }, %, $seg01)
   |> angledLine({
-       angle: segAng(seg01, %) + 120,
+       angle: segAng(seg01) + 120,
        length: 50
      }, %)
   |> lineTo(profileStart(%), %)
@@ -34,7 +34,7 @@ const sketch001 = startSketchOn('XY')
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -76,15 +76,21 @@ const sketch001 = startSketchOn('XY')
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -102,7 +108,7 @@ const sketch001 = startSketchOn('XY')
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -253,6 +259,38 @@ const sketch001 = startSketchOn('XY')
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/profileStartX.md

@@ -29,7 +29,7 @@ const sketch001 = startSketchOn('XY')
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -71,15 +71,21 @@ const sketch001 = startSketchOn('XY')
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -97,7 +103,7 @@ const sketch001 = startSketchOn('XY')
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -248,6 +254,38 @@ const sketch001 = startSketchOn('XY')
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/profileStartY.md

@@ -28,7 +28,7 @@ const sketch001 = startSketchOn('XY')
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -70,15 +70,21 @@ const sketch001 = startSketchOn('XY')
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -96,7 +102,7 @@ const sketch001 = startSketchOn('XY')
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -247,6 +253,38 @@ const sketch001 = startSketchOn('XY')
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/revolve.md

@@ -107,7 +107,7 @@ const sketch001 = startSketchOn(box, "END")
   |> circle([10, 10], 4, %)
   |> revolve({
        angle: 90,
-       axis: getOppositeEdge(revolveAxis, box)
+       axis: getOppositeEdge(revolveAxis)
      }, %)
 ```
 
@@ -157,6 +157,92 @@ const part001 = revolve({
 } |
 uuid |
 {
+	// Engine information for a tag.
+	info: {
+	// The id of the tagged object.
+	id: uuid,
+	// The path the tag is on.
+	path: {
+	// The from point.
+	from: [number, number],
+	// The tag of the path.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	// The to point.
+	to: [number, number],
+},
+	// The sketch group the tag is on.
+	sketchGroup: uuid,
+	// The surface information for the tag.
+	surface: {
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "extrudePlane",
+} |
+{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
+},
+},
 	value: string,
 },
 }
@@ -164,7 +250,7 @@ uuid |
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -206,15 +292,21 @@ uuid |
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -232,7 +324,7 @@ uuid |
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -383,6 +475,38 @@ uuid |
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -534,15 +658,21 @@ uuid |
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -560,7 +690,7 @@ uuid |
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -602,15 +732,21 @@ uuid |
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -662,6 +798,38 @@ uuid |
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -835,6 +1003,38 @@ uuid |
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 }
 ```

docs/kcl/segAng.md

@@ -9,7 +9,7 @@ Returns the angle of the segment.
 
 
 ```js
-segAng(segment_name: TagIdentifier, sketch_group: SketchGroup) -> number
+segAng(tag: TagIdentifier) -> number
 ```
 
 ### Examples
@@ -20,9 +20,9 @@ const exampleSketch = startSketchOn('XZ')
   |> line([10, 0], %)
   |> line([5, 10], %, $seg01)
   |> line([-10, 0], %)
-  |> angledLine([segAng(seg01, %), 10], %)
+  |> angledLine([segAng(seg01), 10], %)
   |> line([-10, 0], %)
-  |> angledLine([segAng(seg01, %), -15], %)
+  |> angledLine([segAng(seg01), -15], %)
   |> close(%)
 
 const example = extrude(4, exampleSketch)
@@ -32,89 +32,15 @@ const example = extrude(4, exampleSketch)
 
 ### Arguments
 
-* `segment_name`: `TagIdentifier` (REQUIRED)
+* `tag`: `TagIdentifier` (REQUIRED)
 ```js
 {
-	value: string,
-}
-```
-* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
-```js
-{
-	// The id of the sketch group.
+	// Engine information for a tag.
+	info: {
+	// The id of the tagged object.
 	id: uuid,
-	// What the sketch is on (can be a plane or a face).
-	on: {
-	// The id of the plane.
-	id: uuid,
-	// Origin of the plane.
-	origin: {
-	x: number,
-	y: number,
-	z: number,
-},
-	type: "plane",
-	// Type for a plane.
-	value: "XY" | "XZ" | "YZ" | "Custom",
-	// What should the plane’s X axis be?
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// What should the plane’s Y axis be?
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis (normal).
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-} |
-{
-	// The extrude group the face is on.
-	extrudeGroup: {
-	// The id of the extrusion end cap
-	endCapId: uuid,
-	// Chamfers or fillets on this extrude group.
-	filletOrChamfers: [{
-	// The engine id of the edge to fillet.
-	edge_id: uuid,
-	// The id of the engine command that called this fillet.
-	id: uuid,
-	radius: number,
-	type: "fillet",
-} |
-{
-	// The engine id of the edge to chamfer.
-	edge_id: uuid,
-	// The id of the engine command that called this chamfer.
-	id: uuid,
-	length: number,
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	type: "chamfer",
-}],
-	// The height of the extrude group.
-	height: number,
-	// The id of the extrude group.
-	id: uuid,
-	// The sketch group.
-	sketchGroup: {
-	// The id of the sketch group.
-	id: uuid,
-	// What the sketch is on (can be a plane or a face).
-	on: SketchSurface,
-	// The starting path.
-	start: {
+	// The path the tag is on.
+	path: {
 	// The from point.
 	from: [number, number],
 	// The tag of the path.
@@ -127,109 +53,10 @@ const example = extrude(4, exampleSketch)
 	// The to point.
 	to: [number, number],
 },
-	// Tag identifiers that have been declared in this sketch group.
-	tags: {
-},
-	// The paths in the sketch group.
-	value: [{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "ToPoint",
-} |
-{
-	// arc's direction
-	ccw: string,
-	// the arc's center
-	center: [number, number],
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "TangentialArcTo",
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "TangentialArc",
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "Horizontal",
-	// The x coordinate.
-	x: number,
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "AngledLineTo",
-	// The x coordinate.
-	x: number,
-	// The y coordinate.
-	y: number,
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "Base",
-}],
-},
-	// The id of the extrusion start cap
-	startCapId: uuid,
-	// The extrude surfaces.
-	value: [{
+	// The sketch group the tag is on.
+	sketchGroup: uuid,
+	// The surface information for the tag.
+	surface: {
 	// The face id for the extrude plane.
 	faceId: uuid,
 	// The id of the geometry.
@@ -260,144 +87,41 @@ const example = extrude(4, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
-}],
-},
-	// The id of the face.
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
 	id: uuid,
-	type: "face",
-	// The tag of the face.
-	value: string,
-	// What should the face’s X axis be?
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// What should the face’s Y axis be?
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis (normal).
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-},
-	// The starting path.
-	start: {
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
 	tag: {
 	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
 	end: number,
 	start: number,
 	value: string,
 },
-	// The to point.
-	to: [number, number],
-},
-	// Tag identifiers that have been declared in this sketch group.
-	tags: {
-},
-	// The paths in the sketch group.
-	value: [{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "ToPoint",
+	type: "chamfer",
 } |
 {
-	// arc's direction
-	ccw: string,
-	// the arc's center
-	center: [number, number],
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
 	tag: {
 	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
 	end: number,
 	start: number,
 	value: string,
 },
-	// The to point.
-	to: [number, number],
-	type: "TangentialArcTo",
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
+	type: "fillet",
 },
-	// The to point.
-	to: [number, number],
-	type: "TangentialArc",
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
 },
-	// The to point.
-	to: [number, number],
-	type: "Horizontal",
-	// The x coordinate.
-	x: number,
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
 	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "AngledLineTo",
-	// The x coordinate.
-	x: number,
-	// The y coordinate.
-	y: number,
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "Base",
-}],
 }
 ```
 

docs/kcl/segEndX.md

@@ -9,7 +9,7 @@ Returns the segment end of x.
 
 
 ```js
-segEndX(segment_name: TagIdentifier, sketch_group: SketchGroup) -> number
+segEndX(tag: TagIdentifier) -> number
 ```
 
 ### Examples
@@ -19,7 +19,7 @@ const exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> line([20, 0], %, $thing)
   |> line([0, 5], %)
-  |> line([segEndX(thing, %), 0], %)
+  |> line([segEndX(thing), 0], %)
   |> line([-20, 10], %)
   |> close(%)
 
@@ -30,89 +30,15 @@ const example = extrude(5, exampleSketch)
 
 ### Arguments
 
-* `segment_name`: `TagIdentifier` (REQUIRED)
+* `tag`: `TagIdentifier` (REQUIRED)
 ```js
 {
-	value: string,
-}
-```
-* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
-```js
-{
-	// The id of the sketch group.
+	// Engine information for a tag.
+	info: {
+	// The id of the tagged object.
 	id: uuid,
-	// What the sketch is on (can be a plane or a face).
-	on: {
-	// The id of the plane.
-	id: uuid,
-	// Origin of the plane.
-	origin: {
-	x: number,
-	y: number,
-	z: number,
-},
-	type: "plane",
-	// Type for a plane.
-	value: "XY" | "XZ" | "YZ" | "Custom",
-	// What should the plane’s X axis be?
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// What should the plane’s Y axis be?
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis (normal).
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-} |
-{
-	// The extrude group the face is on.
-	extrudeGroup: {
-	// The id of the extrusion end cap
-	endCapId: uuid,
-	// Chamfers or fillets on this extrude group.
-	filletOrChamfers: [{
-	// The engine id of the edge to fillet.
-	edge_id: uuid,
-	// The id of the engine command that called this fillet.
-	id: uuid,
-	radius: number,
-	type: "fillet",
-} |
-{
-	// The engine id of the edge to chamfer.
-	edge_id: uuid,
-	// The id of the engine command that called this chamfer.
-	id: uuid,
-	length: number,
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	type: "chamfer",
-}],
-	// The height of the extrude group.
-	height: number,
-	// The id of the extrude group.
-	id: uuid,
-	// The sketch group.
-	sketchGroup: {
-	// The id of the sketch group.
-	id: uuid,
-	// What the sketch is on (can be a plane or a face).
-	on: SketchSurface,
-	// The starting path.
-	start: {
+	// The path the tag is on.
+	path: {
 	// The from point.
 	from: [number, number],
 	// The tag of the path.
@@ -125,109 +51,10 @@ const example = extrude(5, exampleSketch)
 	// The to point.
 	to: [number, number],
 },
-	// Tag identifiers that have been declared in this sketch group.
-	tags: {
-},
-	// The paths in the sketch group.
-	value: [{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "ToPoint",
-} |
-{
-	// arc's direction
-	ccw: string,
-	// the arc's center
-	center: [number, number],
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "TangentialArcTo",
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "TangentialArc",
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "Horizontal",
-	// The x coordinate.
-	x: number,
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "AngledLineTo",
-	// The x coordinate.
-	x: number,
-	// The y coordinate.
-	y: number,
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "Base",
-}],
-},
-	// The id of the extrusion start cap
-	startCapId: uuid,
-	// The extrude surfaces.
-	value: [{
+	// The sketch group the tag is on.
+	sketchGroup: uuid,
+	// The surface information for the tag.
+	surface: {
 	// The face id for the extrude plane.
 	faceId: uuid,
 	// The id of the geometry.
@@ -258,144 +85,41 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
-}],
-},
-	// The id of the face.
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
 	id: uuid,
-	type: "face",
-	// The tag of the face.
-	value: string,
-	// What should the face’s X axis be?
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// What should the face’s Y axis be?
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis (normal).
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-},
-	// The starting path.
-	start: {
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
 	tag: {
 	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
 	end: number,
 	start: number,
 	value: string,
 },
-	// The to point.
-	to: [number, number],
-},
-	// Tag identifiers that have been declared in this sketch group.
-	tags: {
-},
-	// The paths in the sketch group.
-	value: [{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "ToPoint",
+	type: "chamfer",
 } |
 {
-	// arc's direction
-	ccw: string,
-	// the arc's center
-	center: [number, number],
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
 	tag: {
 	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
 	end: number,
 	start: number,
 	value: string,
 },
-	// The to point.
-	to: [number, number],
-	type: "TangentialArcTo",
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
+	type: "fillet",
 },
-	// The to point.
-	to: [number, number],
-	type: "TangentialArc",
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
 },
-	// The to point.
-	to: [number, number],
-	type: "Horizontal",
-	// The x coordinate.
-	x: number,
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
 	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "AngledLineTo",
-	// The x coordinate.
-	x: number,
-	// The y coordinate.
-	y: number,
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "Base",
-}],
 }
 ```
 

docs/kcl/segEndY.md

@@ -9,7 +9,7 @@ Returns the segment end of y.
 
 
 ```js
-segEndY(segment_name: TagIdentifier, sketch_group: SketchGroup) -> number
+segEndY(tag: TagIdentifier) -> number
 ```
 
 ### Examples
@@ -20,7 +20,7 @@ const exampleSketch = startSketchOn('XZ')
   |> line([20, 0], %)
   |> line([0, 3], %, $thing)
   |> line([-10, 0], %)
-  |> line([0, segEndY(thing, %)], %)
+  |> line([0, segEndY(thing)], %)
   |> line([-10, 0], %)
   |> close(%)
 
@@ -31,89 +31,15 @@ const example = extrude(5, exampleSketch)
 
 ### Arguments
 
-* `segment_name`: `TagIdentifier` (REQUIRED)
+* `tag`: `TagIdentifier` (REQUIRED)
 ```js
 {
-	value: string,
-}
-```
-* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
-```js
-{
-	// The id of the sketch group.
+	// Engine information for a tag.
+	info: {
+	// The id of the tagged object.
 	id: uuid,
-	// What the sketch is on (can be a plane or a face).
-	on: {
-	// The id of the plane.
-	id: uuid,
-	// Origin of the plane.
-	origin: {
-	x: number,
-	y: number,
-	z: number,
-},
-	type: "plane",
-	// Type for a plane.
-	value: "XY" | "XZ" | "YZ" | "Custom",
-	// What should the plane’s X axis be?
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// What should the plane’s Y axis be?
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis (normal).
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-} |
-{
-	// The extrude group the face is on.
-	extrudeGroup: {
-	// The id of the extrusion end cap
-	endCapId: uuid,
-	// Chamfers or fillets on this extrude group.
-	filletOrChamfers: [{
-	// The engine id of the edge to fillet.
-	edge_id: uuid,
-	// The id of the engine command that called this fillet.
-	id: uuid,
-	radius: number,
-	type: "fillet",
-} |
-{
-	// The engine id of the edge to chamfer.
-	edge_id: uuid,
-	// The id of the engine command that called this chamfer.
-	id: uuid,
-	length: number,
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	type: "chamfer",
-}],
-	// The height of the extrude group.
-	height: number,
-	// The id of the extrude group.
-	id: uuid,
-	// The sketch group.
-	sketchGroup: {
-	// The id of the sketch group.
-	id: uuid,
-	// What the sketch is on (can be a plane or a face).
-	on: SketchSurface,
-	// The starting path.
-	start: {
+	// The path the tag is on.
+	path: {
 	// The from point.
 	from: [number, number],
 	// The tag of the path.
@@ -126,109 +52,10 @@ const example = extrude(5, exampleSketch)
 	// The to point.
 	to: [number, number],
 },
-	// Tag identifiers that have been declared in this sketch group.
-	tags: {
-},
-	// The paths in the sketch group.
-	value: [{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "ToPoint",
-} |
-{
-	// arc's direction
-	ccw: string,
-	// the arc's center
-	center: [number, number],
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "TangentialArcTo",
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "TangentialArc",
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "Horizontal",
-	// The x coordinate.
-	x: number,
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "AngledLineTo",
-	// The x coordinate.
-	x: number,
-	// The y coordinate.
-	y: number,
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "Base",
-}],
-},
-	// The id of the extrusion start cap
-	startCapId: uuid,
-	// The extrude surfaces.
-	value: [{
+	// The sketch group the tag is on.
+	sketchGroup: uuid,
+	// The surface information for the tag.
+	surface: {
 	// The face id for the extrude plane.
 	faceId: uuid,
 	// The id of the geometry.
@@ -259,144 +86,41 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
-}],
-},
-	// The id of the face.
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
 	id: uuid,
-	type: "face",
-	// The tag of the face.
-	value: string,
-	// What should the face’s X axis be?
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// What should the face’s Y axis be?
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis (normal).
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-},
-	// The starting path.
-	start: {
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
 	tag: {
 	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
 	end: number,
 	start: number,
 	value: string,
 },
-	// The to point.
-	to: [number, number],
-},
-	// Tag identifiers that have been declared in this sketch group.
-	tags: {
-},
-	// The paths in the sketch group.
-	value: [{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "ToPoint",
+	type: "chamfer",
 } |
 {
-	// arc's direction
-	ccw: string,
-	// the arc's center
-	center: [number, number],
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
 	tag: {
 	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
 	end: number,
 	start: number,
 	value: string,
 },
-	// The to point.
-	to: [number, number],
-	type: "TangentialArcTo",
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
+	type: "fillet",
 },
-	// The to point.
-	to: [number, number],
-	type: "TangentialArc",
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
 },
-	// The to point.
-	to: [number, number],
-	type: "Horizontal",
-	// The x coordinate.
-	x: number,
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
 	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "AngledLineTo",
-	// The x coordinate.
-	x: number,
-	// The y coordinate.
-	y: number,
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "Base",
-}],
 }
 ```
 

docs/kcl/segLen.md

@@ -9,7 +9,7 @@ Returns the length of the segment.
 
 
 ```js
-segLen(segment_name: TagIdentifier, sketch_group: SketchGroup) -> number
+segLen(tag: TagIdentifier) -> number
 ```
 
 ### Examples
@@ -19,7 +19,7 @@ const exampleSketch = startSketchOn("XZ")
   |> startProfileAt([0, 0], %)
   |> angledLine({ angle: 60, length: 10 }, %, $thing)
   |> tangentialArc({ offset: -120, radius: 5 }, %)
-  |> angledLine({ angle: -60, length: segLen(thing, %) }, %)
+  |> angledLine({ angle: -60, length: segLen(thing) }, %)
   |> close(%)
 
 const example = extrude(5, exampleSketch)
@@ -29,89 +29,15 @@ const example = extrude(5, exampleSketch)
 
 ### Arguments
 
-* `segment_name`: `TagIdentifier` (REQUIRED)
+* `tag`: `TagIdentifier` (REQUIRED)
 ```js
 {
-	value: string,
-}
-```
-* `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
-```js
-{
-	// The id of the sketch group.
+	// Engine information for a tag.
+	info: {
+	// The id of the tagged object.
 	id: uuid,
-	// What the sketch is on (can be a plane or a face).
-	on: {
-	// The id of the plane.
-	id: uuid,
-	// Origin of the plane.
-	origin: {
-	x: number,
-	y: number,
-	z: number,
-},
-	type: "plane",
-	// Type for a plane.
-	value: "XY" | "XZ" | "YZ" | "Custom",
-	// What should the plane’s X axis be?
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// What should the plane’s Y axis be?
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis (normal).
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-} |
-{
-	// The extrude group the face is on.
-	extrudeGroup: {
-	// The id of the extrusion end cap
-	endCapId: uuid,
-	// Chamfers or fillets on this extrude group.
-	filletOrChamfers: [{
-	// The engine id of the edge to fillet.
-	edge_id: uuid,
-	// The id of the engine command that called this fillet.
-	id: uuid,
-	radius: number,
-	type: "fillet",
-} |
-{
-	// The engine id of the edge to chamfer.
-	edge_id: uuid,
-	// The id of the engine command that called this chamfer.
-	id: uuid,
-	length: number,
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	type: "chamfer",
-}],
-	// The height of the extrude group.
-	height: number,
-	// The id of the extrude group.
-	id: uuid,
-	// The sketch group.
-	sketchGroup: {
-	// The id of the sketch group.
-	id: uuid,
-	// What the sketch is on (can be a plane or a face).
-	on: SketchSurface,
-	// The starting path.
-	start: {
+	// The path the tag is on.
+	path: {
 	// The from point.
 	from: [number, number],
 	// The tag of the path.
@@ -124,109 +50,10 @@ const example = extrude(5, exampleSketch)
 	// The to point.
 	to: [number, number],
 },
-	// Tag identifiers that have been declared in this sketch group.
-	tags: {
-},
-	// The paths in the sketch group.
-	value: [{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "ToPoint",
-} |
-{
-	// arc's direction
-	ccw: string,
-	// the arc's center
-	center: [number, number],
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "TangentialArcTo",
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "TangentialArc",
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "Horizontal",
-	// The x coordinate.
-	x: number,
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "AngledLineTo",
-	// The x coordinate.
-	x: number,
-	// The y coordinate.
-	y: number,
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "Base",
-}],
-},
-	// The id of the extrusion start cap
-	startCapId: uuid,
-	// The extrude surfaces.
-	value: [{
+	// The sketch group the tag is on.
+	sketchGroup: uuid,
+	// The surface information for the tag.
+	surface: {
 	// The face id for the extrude plane.
 	faceId: uuid,
 	// The id of the geometry.
@@ -257,144 +84,41 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
-}],
-},
-	// The id of the face.
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
 	id: uuid,
-	type: "face",
-	// The tag of the face.
-	value: string,
-	// What should the face’s X axis be?
-	xAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// What should the face’s Y axis be?
-	yAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-	// The z-axis (normal).
-	zAxis: {
-	x: number,
-	y: number,
-	z: number,
-},
-},
-	// The starting path.
-	start: {
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
 	tag: {
 	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
 	end: number,
 	start: number,
 	value: string,
 },
-	// The to point.
-	to: [number, number],
-},
-	// Tag identifiers that have been declared in this sketch group.
-	tags: {
-},
-	// The paths in the sketch group.
-	value: [{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "ToPoint",
+	type: "chamfer",
 } |
 {
-	// arc's direction
-	ccw: string,
-	// the arc's center
-	center: [number, number],
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
 	tag: {
 	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
 	end: number,
 	start: number,
 	value: string,
 },
-	// The to point.
-	to: [number, number],
-	type: "TangentialArcTo",
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
+	type: "fillet",
 },
-	// The to point.
-	to: [number, number],
-	type: "TangentialArc",
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
 },
-	// The to point.
-	to: [number, number],
-	type: "Horizontal",
-	// The x coordinate.
-	x: number,
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
 	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "AngledLineTo",
-	// The x coordinate.
-	x: number,
-	// The y coordinate.
-	y: number,
-} |
-{
-	// The from point.
-	from: [number, number],
-	// The tag of the path.
-	tag: {
-	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
-	end: number,
-	start: number,
-	value: string,
-},
-	// The to point.
-	to: [number, number],
-	type: "Base",
-}],
 }
 ```
 

docs/kcl/shell.md

@@ -37,6 +37,92 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	// The faces you want removed.
 	faces: ["start" | "end" |
 {
+	// Engine information for a tag.
+	info: {
+	// The id of the tagged object.
+	id: uuid,
+	// The path the tag is on.
+	path: {
+	// The from point.
+	from: [number, number],
+	// The tag of the path.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	// The to point.
+	to: [number, number],
+},
+	// The sketch group the tag is on.
+	sketchGroup: uuid,
+	// The surface information for the tag.
+	surface: {
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "extrudePlane",
+} |
+{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
+},
+},
 	value: string,
 }],
 	// The thickness of the shell.
@@ -51,15 +137,21 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -77,7 +169,7 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -119,15 +211,21 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -179,6 +277,38 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -352,6 +482,38 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 }
 ```
@@ -366,15 +528,21 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -392,7 +560,7 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -434,15 +602,21 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -494,6 +668,38 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -667,6 +873,38 @@ shell({ faces: ['end'], thickness: 0.25 }, firstSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 }
 ```

docs/kcl/startProfileAt.md

@@ -97,15 +97,21 @@ const example = extrude(5, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -123,7 +129,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -331,6 +337,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -373,7 +411,7 @@ const example = extrude(5, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -415,15 +453,21 @@ const example = extrude(5, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -441,7 +485,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -592,6 +636,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/startSketchAt.md

@@ -59,7 +59,7 @@ const example = extrude(5, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -101,15 +101,21 @@ const example = extrude(5, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -127,7 +133,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -278,6 +284,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/startSketchOn.md

@@ -55,7 +55,7 @@ const exampleSketch = startSketchOn("XY")
 
 const example = extrude(10, exampleSketch)
 
-const exampleSketch002 = startSketchOn(example, 'sketchingFace')
+const exampleSketch002 = startSketchOn(example, sketchingFace)
   |> startProfileAt([1, 1], %)
   |> line([8, 0], %)
   |> line([0, 8], %)
@@ -64,7 +64,7 @@ const exampleSketch002 = startSketchOn(example, 'sketchingFace')
 
 const example002 = extrude(10, exampleSketch002)
 
-const exampleSketch003 = startSketchOn(example002, 'sketchingFace002')
+const exampleSketch003 = startSketchOn(example002, sketchingFace002)
   |> startProfileAt([-8, 12], %)
   |> line([0, 6], %)
   |> line([6, 0], %)
@@ -106,9 +106,9 @@ const example002 = extrude(5, exampleSketch002)
 const a1 = startSketchOn({
        plane: {
          origin: { x: 0, y: 0, z: 0 },
-         x_axis: { x: 1, y: 0, z: 0 },
-         y_axis: { x: 0, y: 1, z: 0 },
-         z_axis: { x: 0, y: 0, z: 1 }
+         xAxis: { x: 1, y: 0, z: 0 },
+         yAxis: { x: 0, y: 1, z: 0 },
+         zAxis: { x: 0, y: 0, z: 1 }
        }
      })
   |> startProfileAt([0, 0], %)
@@ -141,19 +141,19 @@ const a1 = startSketchOn({
 	z: number,
 },
 	// What should the plane’s X axis be?
-	x_axis: {
+	xAxis: {
 	x: number,
 	y: number,
 	z: number,
 },
 	// What should the plane’s Y axis be?
-	y_axis: {
+	yAxis: {
 	x: number,
 	y: number,
 	z: number,
 },
 	// The z-axis (normal).
-	z_axis: {
+	zAxis: {
 	x: number,
 	y: number,
 	z: number,
@@ -166,15 +166,21 @@ const a1 = startSketchOn({
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -192,7 +198,7 @@ const a1 = startSketchOn({
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -400,6 +406,38 @@ const a1 = startSketchOn({
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 }
 ```
@@ -407,6 +445,92 @@ const a1 = startSketchOn({
 ```js
 "start" | "end" |
 {
+	// Engine information for a tag.
+	info: {
+	// The id of the tagged object.
+	id: uuid,
+	// The path the tag is on.
+	path: {
+	// The from point.
+	from: [number, number],
+	// The tag of the path.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	// The to point.
+	to: [number, number],
+},
+	// The sketch group the tag is on.
+	sketchGroup: uuid,
+	// The surface information for the tag.
+	surface: {
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "extrudePlane",
+} |
+{
+	// The face id for the extrude plane.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
+},
+},
 	value: string,
 }
 ```
@@ -454,15 +578,21 @@ const a1 = startSketchOn({
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -480,7 +610,7 @@ const a1 = startSketchOn({
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -688,6 +818,38 @@ const a1 = startSketchOn({
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/tangentialArc.md

@@ -42,7 +42,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -84,15 +84,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -110,7 +116,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -261,6 +267,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -416,7 +454,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -458,15 +496,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -484,7 +528,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -635,6 +679,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/tangentialArcTo.md

@@ -33,7 +33,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -75,15 +75,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -101,7 +107,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -252,6 +258,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -407,7 +445,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -449,15 +487,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -475,7 +519,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -626,6 +670,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/xLine.md

@@ -36,7 +36,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -78,15 +78,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -104,7 +110,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -255,6 +261,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -410,7 +448,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -452,15 +490,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -478,7 +522,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -629,6 +673,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/xLineTo.md

@@ -36,7 +36,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -78,15 +78,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -104,7 +110,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -255,6 +261,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -410,7 +448,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -452,15 +490,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -478,7 +522,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -629,6 +673,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/yLine.md

@@ -34,7 +34,7 @@ const example = extrude(10, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -76,15 +76,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -102,7 +108,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -253,6 +259,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -408,7 +446,7 @@ const example = extrude(10, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -450,15 +488,21 @@ const example = extrude(10, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -476,7 +520,7 @@ const example = extrude(10, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -627,6 +671,38 @@ const example = extrude(10, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

docs/kcl/yLineTo.md

@@ -32,7 +32,7 @@ const example = extrude(5, exampleSketch)
 * `sketch_group`: `SketchGroup` - A sketch group is a collection of paths. (REQUIRED)
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -74,15 +74,21 @@ const example = extrude(5, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -100,7 +106,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -251,6 +257,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.
@@ -406,7 +444,7 @@ const example = extrude(5, exampleSketch)
 `SketchGroup` - A sketch group is a collection of paths.
 ```js
 {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: {
@@ -448,15 +486,21 @@ const example = extrude(5, exampleSketch)
 	// Chamfers or fillets on this extrude group.
 	filletOrChamfers: [{
 	// The engine id of the edge to fillet.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this fillet.
 	id: uuid,
 	radius: number,
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
 	type: "fillet",
 } |
 {
 	// The engine id of the edge to chamfer.
-	edge_id: uuid,
+	edgeId: uuid,
 	// The id of the engine command that called this chamfer.
 	id: uuid,
 	length: number,
@@ -474,7 +518,7 @@ const example = extrude(5, exampleSketch)
 	id: uuid,
 	// The sketch group.
 	sketchGroup: {
-	// The id of the sketch group.
+	// The id of the sketch group (this will change when the engine's reference to it changes.
 	id: uuid,
 	// What the sketch is on (can be a plane or a face).
 	on: SketchSurface,
@@ -625,6 +669,38 @@ const example = extrude(5, exampleSketch)
 	value: string,
 },
 	type: "extrudeArc",
+} |
+{
+	// The id for the chamfer surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "chamfer",
+} |
+{
+	// The id for the fillet surface.
+	faceId: uuid,
+	// The id of the geometry.
+	id: uuid,
+	// The source range.
+	sourceRange: [number, number],
+	// The tag.
+	tag: {
+	digest: [number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number, number],
+	end: number,
+	start: number,
+	value: string,
+},
+	type: "fillet",
 }],
 },
 	// The id of the face.

e2e/playwright/flow-tests.spec.ts

@@ -26,7 +26,7 @@ import * as TOML from '@iarna/toml'
 import { LineInputsType } from 'lang/std/sketchcombos'
 import { Coords2d } from 'lang/std/sketch'
 import { KCL_DEFAULT_LENGTH } from 'lib/constants'
-import { EngineCommand } from 'lang/std/engineConnection'
+import { EngineCommand } from 'lang/std/artifactMap'
 import { onboardingPaths } from 'routes/Onboarding/paths'
 import { bracket } from 'lib/exampleKcl'
 
@@ -48,8 +48,6 @@ const commonPoints = {
   startAt: '[7.19, -9.7]',
   num1: 7.25,
   num2: 14.44,
-  // num1: 9.64,
-  // num2: 19.19,
 }
 
 test.afterEach(async ({ context, page }, testInfo) => {
@@ -141,8 +139,9 @@ async function doBasicSketch(page: Page, openPanes: string[]) {
     await expect(u.codeLocator)
       .toHaveText(`const sketch001 = startSketchOn('XZ')
   |> startProfileAt(${commonPoints.startAt}, %)`)
+  } else {
+    await page.waitForTimeout(500)
   }
-  await page.waitForTimeout(500)
 
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 10)
   await page.waitForTimeout(500)
@@ -152,8 +151,9 @@ async function doBasicSketch(page: Page, openPanes: string[]) {
       .toHaveText(`const sketch001 = startSketchOn('XZ')
   |> startProfileAt(${commonPoints.startAt}, %)
   |> line([${commonPoints.num1}, 0], %)`)
+  } else {
+    await page.waitForTimeout(500)
   }
-  await page.waitForTimeout(500)
 
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 20)
   if (openPanes.includes('code')) {
@@ -162,8 +162,9 @@ async function doBasicSketch(page: Page, openPanes: string[]) {
   |> startProfileAt(${commonPoints.startAt}, %)
   |> line([${commonPoints.num1}, 0], %)
   |> line([0, ${commonPoints.num1 + 0.01}], %)`)
+  } else {
+    await page.waitForTimeout(500)
   }
-  await page.waitForTimeout(500)
   await page.mouse.click(startXPx, 500 - PUR * 20)
   if (openPanes.includes('code')) {
     await expect(u.codeLocator)
@@ -175,7 +176,7 @@ async function doBasicSketch(page: Page, openPanes: string[]) {
   }
 
   // deselect line tool
-  await page.getByRole('button', { name: 'Line' }).click()
+  await page.getByRole('button', { name: 'Line', exact: true }).click()
   await page.waitForTimeout(500)
 
   const line1 = await u.getSegmentBodyCoords(`[data-overlay-index="${0}"]`, 0)
@@ -203,7 +204,7 @@ async function doBasicSketch(page: Page, openPanes: string[]) {
     await expect(page.locator('.cm-cursor')).toHaveCount(2)
   }
 
-  await page.getByRole('button', { name: 'Constraints' }).click()
+  await page.getByRole('button', { name: 'Length: open menu' }).click()
   await page.getByRole('button', { name: 'Equal Length' }).click()
 
   // Open the code pane.
@@ -212,7 +213,7 @@ async function doBasicSketch(page: Page, openPanes: string[]) {
   |> startProfileAt(${commonPoints.startAt}, %)
   |> line([${commonPoints.num1}, 0], %, $seg01)
   |> line([0, ${commonPoints.num1 + 0.01}], %)
-  |> angledLine([180, segLen(seg01, %)], %)`)
+  |> angledLine([180, segLen(seg01)], %)`)
 }
 
 test.describe('Basic sketch', () => {
@@ -452,7 +453,7 @@ test.describe('Testing Camera Movement', () => {
     // await expect(u.codeLocator).toHaveText(code)
 
     // click the line button
-    await page.getByRole('button', { name: 'Line' }).click()
+    await page.getByRole('button', { name: 'Line', exact: true }).click()
 
     const hoverOverNothing = async () => {
       // await u.canvasLocator.hover({position: {x: 700, y: 325}})
@@ -924,10 +925,10 @@ test.describe('Editor tests', () => {
 
     await expect(page.locator('.cm-lint-marker-error')).toBeVisible()
     await expect(
-      page.locator('.cm-lintRange.cm-lintRange-error').first()
+      page.locator('.cm-lint-marker.cm-lint-marker-error')
     ).toBeVisible()
 
-    await page.locator('.cm-lintRange.cm-lintRange-error').hover()
+    await page.locator('.cm-lint-marker.cm-lint-marker-error').hover()
     await expect(page.locator('.cm-diagnosticText').first()).toBeVisible()
     await expect(
       page.getByText('Cannot redefine `topAng`').first()
@@ -1015,18 +1016,18 @@ test.describe('Editor tests', () => {
   |> startProfileAt([0, 0], %)
   |> line([0, 10], %)
   |> line([10, 0], %)
-  |> line([0, -10], %, 'revolveAxis')
+  |> line([0, -10], %, $revolveAxis)
   |> close(%)
   |> extrude(10, %)
   
-  const sketch001 = startSketchOn(box, "revolveAxis")
+  const sketch001 = startSketchOn(box, revolveAxis)
   |> startProfileAt([5, 10], %)
   |> line([0, -10], %)
   |> line([2, 0], %)
   |> line([0, -10], %)
   |> close(%)
   |> revolve({
-  axis: getEdge('revolveAxis', box),
+  axis: revolveAxis,
   angle: 90
   }, %)
       `
@@ -1044,7 +1045,7 @@ test.describe('Editor tests', () => {
     await page.hover('.cm-lint-marker-error')
     const searchText =
       'sketch profile must lie entirely on one side of the revolution axis'
-    await expect(page.getByText(searchText).first()).toBeVisible()
+    await expect(page.getByText(searchText)).toBeVisible()
   })
   test.describe('Autocomplete works', () => {
     test('with enter/click to accept the completion', async ({ page }) => {
@@ -1063,7 +1064,7 @@ test.describe('Editor tests', () => {
       await page.keyboard.type('const sketch001 = start')
 
       // expect there to be six auto complete options
-      await expect(page.locator('.cm-completionLabel')).toHaveCount(6)
+      await expect(page.locator('.cm-completionLabel')).toHaveCount(8)
       // this makes sure we can accept a completion with click
       await page.getByText('startSketchOn').click()
       await page.keyboard.type("'XZ'")
@@ -1462,7 +1463,9 @@ test.describe('Can create sketches on all planes and their back sides', () => {
     await page.mouse.click(clickCoords.x, clickCoords.y)
     await page.waitForTimeout(300) // wait for animation
 
-    await expect(page.getByRole('button', { name: 'Line' })).toBeVisible()
+    await expect(
+      page.getByRole('button', { name: 'Line', exact: true })
+    ).toBeVisible()
 
     // draw a line
     const startXPx = 600
@@ -1472,7 +1475,7 @@ test.describe('Can create sketches on all planes and their back sides', () => {
 
     await expect(page.locator('.cm-content')).toHaveText(code)
 
-    await page.getByRole('button', { name: 'Line' }).click()
+    await page.getByRole('button', { name: 'Line', exact: true }).click()
     await u.openAndClearDebugPanel()
     await page.getByRole('button', { name: 'Exit Sketch' }).click()
     await u.expectCmdLog('[data-message-type="execution-done"]')
@@ -1511,6 +1514,8 @@ test.describe('Can create sketches on all planes and their back sides', () => {
 })
 
 test.describe('Copilot ghost text', () => {
+  test.skip(true, 'Needs to get covered again')
+
   test('completes code in empty file', async ({ page }) => {
     const u = await getUtils(page)
     // const PUR = 400 / 37.5 //pixeltoUnitRatio
@@ -1549,7 +1554,9 @@ test.describe('Copilot ghost text', () => {
     await expect(page.locator('.cm-ghostText')).not.toBeVisible()
   })
 
-  test('copilot disabled in sketch mode no select plane', async ({ page }) => {
+  test.skip('copilot disabled in sketch mode no select plane', async ({
+    page,
+  }) => {
     const u = await getUtils(page)
     // const PUR = 400 / 37.5 //pixeltoUnitRatio
     await page.setViewportSize({ width: 1200, height: 500 })
@@ -2096,7 +2103,7 @@ test.describe('Testing settings', () => {
       .hover()
     await page
       .getByRole('button', {
-        name: 'Roll back theme ; Has tooltip: Roll back to match default',
+        name: 'Roll back theme',
       })
       .click()
     await expect(page.locator('select[name="app-theme"]')).toHaveValue('system')
@@ -2148,7 +2155,7 @@ test.describe('Testing settings', () => {
       .hover()
     await page
       .getByRole('button', {
-        name: 'Roll back theme ; Has tooltip: Roll back to match default',
+        name: 'Roll back theme',
       })
       .click()
     await expect(page.locator('select[name="app-theme"]')).toHaveValue('system')
@@ -2258,6 +2265,50 @@ test.describe('Onboarding tests', () => {
     await expect(page.locator('.cm-content')).toContainText('// Shelf Bracket')
   })
 
+  test('Code resets after confirmation', async ({ page }) => {
+    const initialCode = `const sketch001 = startSketchOn('XZ')`
+
+    // Load the page up with some code so we see the confirmation warning
+    // when we go to replay onboarding
+    await page.addInitScript((code) => {
+      localStorage.setItem('persistCode', code)
+    }, initialCode)
+
+    const u = await getUtils(page)
+    await page.setViewportSize({ width: 1200, height: 500 })
+    await u.waitForAuthSkipAppStart()
+
+    // Replay the onboarding
+    await page.getByRole('link', { name: 'Settings' }).last().click()
+    const replayButton = page.getByRole('button', { name: 'Replay onboarding' })
+    await expect(replayButton).toBeVisible()
+    await replayButton.click()
+
+    // Ensure we see the warning, and that the code has not yet updated
+    await expect(
+      page.getByText('Replaying onboarding resets your code')
+    ).toBeVisible()
+    await expect(page.locator('.cm-content')).toHaveText(initialCode)
+
+    const nextButton = page.getByTestId('onboarding-next')
+    await expect(nextButton).toBeVisible()
+    await nextButton.click()
+
+    // Ensure we see the introduction and that the code has been reset
+    await expect(page.getByText('Welcome to Modeling App!')).toBeVisible()
+    await expect(page.locator('.cm-content')).toContainText('// Shelf Bracket')
+
+    // Ensure we persisted the code to local storage.
+    // Playwright's addInitScript method unfortunately will reset
+    // this code if we try reloading the page as a test,
+    // so this is our best way to test persistence afaik.
+    expect(
+      await page.evaluate(() => {
+        return localStorage.getItem('persistCode')
+      })
+    ).toContain('// Shelf Bracket')
+  })
+
   test('Click through each onboarding step', async ({ page }) => {
     const u = await getUtils(page)
 
@@ -2562,7 +2613,7 @@ test.describe('Testing selections', () => {
     |> line([-${commonPoints.num2}, 0], %)`)
 
     // deselect line tool
-    await page.getByRole('button', { name: 'Line' }).click()
+    await page.getByRole('button', { name: 'Line', exact: true }).click()
 
     await u.closeDebugPanel()
     const selectionSequence = async () => {
@@ -2587,8 +2638,10 @@ test.describe('Testing selections', () => {
       // click a segment hold shift and click an axis, see that a relevant constraint is enabled
       await topHorzSegmentClick()
       await page.keyboard.down('Shift')
-      const constrainButton = page.getByRole('button', { name: 'Constraints' })
-      const absYButton = page.getByRole('button', { name: 'ABS Y' })
+      const constrainButton = page.getByRole('button', {
+        name: 'Length: open menu',
+      })
+      const absYButton = page.getByRole('button', { name: 'Absolute Y' })
       await constrainButton.click()
       await expect(absYButton).toBeDisabled()
       await page.waitForTimeout(100)
@@ -3160,7 +3213,7 @@ const extrude001 = extrude(10, sketch001)`
       },
       {
         pos: [816, 244],
-        expectedCode: 'angledLine([segAng(seg01, %), yo], %)',
+        expectedCode: 'angledLine([segAng(seg01), yo], %)',
       },
       {
         pos: [1107, 161],
@@ -3412,21 +3465,6 @@ const extrude001 = extrude(50, sketch001)
     await expect(
       page.getByRole('button', { name: 'Edit Sketch' })
     ).not.toBeVisible()
-
-    // selecting an editable sketch but clicking "start sketch" should start a new sketch and not edit the existing one
-    await page.getByText(selectionsSnippets.extrudeAndEditAllowed).click()
-    await page.getByRole('button', { name: 'Start Sketch' }).click()
-    await page.waitForTimeout(200)
-    await page.getByTestId('KCL Code').click()
-    await page.waitForTimeout(200)
-    await page.mouse.click(734, 134)
-    await page.waitForTimeout(100)
-    await page.getByTestId('KCL Code').click()
-    // expect main content to contain `sketch005` i.e. started a new sketch
-    await page.waitForTimeout(300)
-    await expect(page.locator('.cm-content')).toHaveText(
-      /sketch001 = startSketchOn\('XZ'\)/
-    )
   })
 
   test('Deselecting line tool should mean nothing happens on click', async ({
@@ -3463,7 +3501,7 @@ const extrude001 = extrude(50, sketch001)
     let previousCodeContent = await page.locator('.cm-content').innerText()
 
     // deselect the line tool by clicking it
-    await page.getByRole('button', { name: 'Line' }).click()
+    await page.getByRole('button', { name: 'Line', exact: true }).click()
 
     await page.mouse.click(700, 200)
     await page.waitForTimeout(100)
@@ -3476,7 +3514,7 @@ const extrude001 = extrude(50, sketch001)
     await expect(page.locator('.cm-content')).toHaveText(previousCodeContent)
 
     // select line tool again
-    await page.getByRole('button', { name: 'Line' }).click()
+    await page.getByRole('button', { name: 'Line', exact: true }).click()
 
     await u.closeDebugPanel()
 
@@ -3809,13 +3847,24 @@ const extrude001 = extrude(distance001, sketch001)`.replace(
     const sketchButton = page.getByRole('button', { name: 'Start Sketch' })
     const cmdBarButton = page.getByRole('button', { name: 'Commands' })
     const rectangleToolCommand = page.getByRole('option', {
-      name: 'Rectangle',
+      name: 'rectangle',
+    })
+    const rectangleToolButton = page.getByRole('button', {
+      name: 'Corner rectangle',
+      exact: true,
+    })
+    const lineToolCommand = page.getByRole('option', {
+      name: 'Line',
+    })
+    const lineToolButton = page.getByRole('button', {
+      name: 'Line',
+      exact: true,
     })
-    const rectangleToolButton = page.getByRole('button', { name: 'Rectangle' })
-    const lineToolCommand = page.getByRole('option', { name: 'Line' })
-    const lineToolButton = page.getByRole('button', { name: 'Line' })
     const arcToolCommand = page.getByRole('option', { name: 'Tangential Arc' })
-    const arcToolButton = page.getByRole('button', { name: 'Tangential Arc' })
+    const arcToolButton = page.getByRole('button', {
+      name: 'Tangential Arc',
+      exact: true,
+    })
 
     // Start a sketch
     await sketchButton.click()
@@ -3862,10 +3911,7 @@ test.describe('Regression tests', () => {
     await u.waitForAuthSkipAppStart()
 
     // expand variables section
-    const variablesTabButton = page.getByRole('tab', {
-      name: 'Variables',
-      exact: false,
-    })
+    const variablesTabButton = page.getByTestId('variables-pane-button')
     await variablesTabButton.click()
 
     // can find sketch001 in the variables summary (pretty-json-container, makes sure we're not looking in the code editor)
@@ -3890,10 +3936,7 @@ test.describe('Regression tests', () => {
 
     await u.waitForAuthSkipAppStart()
 
-    const variablesTabButton = page.getByRole('tab', {
-      name: 'Variables',
-      exact: false,
-    })
+    const variablesTabButton = page.getByTestId('variables-pane-button')
     await variablesTabButton.click()
     // expect to see "myVar:5"
     await expect(
@@ -3976,16 +4019,19 @@ test.describe('Regression tests', () => {
       )
     })
 
-    await page.goto('/')
-    await u.waitForPageLoad()
-
-    // error in guter
-    await expect(page.locator('.cm-lint-marker-error')).toBeVisible()
-    await page.waitForTimeout(200)
-    // expect it still to be there (sometimes it just clears for a bit?)
-    await expect(page.locator('.cm-lint-marker-error')).toBeVisible({
-      timeout: 10_000,
-    })
+    await expect(async () => {
+      await page.goto('/')
+      await u.waitForPageLoad()
+      // error in guter
+      await expect(page.locator('.cm-lint-marker-error')).toBeVisible({
+        timeout: 1_000,
+      })
+      await page.waitForTimeout(200)
+      // expect it still to be there (sometimes it just clears for a bit?)
+      await expect(page.locator('.cm-lint-marker-error')).toBeVisible({
+        timeout: 1_000,
+      })
+    }).toPass({ timeout: 40_000, intervals: [1_000] })
 
     // error text on hover
     await page.hover('.cm-lint-marker-error')
@@ -4133,12 +4179,15 @@ test.describe('Sketch tests', () => {
     await page.setViewportSize({ width: 1200, height: 500 })
 
     await u.waitForAuthSkipAppStart()
-    await page.getByText('tangentialArcTo([24.95, -5.38], %)').click()
 
-    await expect(
-      page.getByRole('button', { name: 'Edit Sketch' })
-    ).toBeEnabled()
-    await page.getByRole('button', { name: 'Edit Sketch' }).click()
+    await expect(async () => {
+      await page.mouse.click(700, 200)
+      await page.getByText('tangentialArcTo([24.95, -5.38], %)').click()
+      await expect(
+        page.getByRole('button', { name: 'Edit Sketch' })
+      ).toBeEnabled({ timeout: 1000 })
+      await page.getByRole('button', { name: 'Edit Sketch' }).click()
+    }).toPass({ timeout: 40_000, intervals: [1_000] })
 
     await page.waitForTimeout(600) // wait for animation
 
@@ -4154,7 +4203,7 @@ test.describe('Sketch tests', () => {
     await u.expectCmdLog('[data-message-type="execution-done"]', 10_000)
     await page.waitForTimeout(100)
 
-    await page.getByRole('button', { name: 'Line' }).click()
+    await page.getByRole('button', { name: 'Line', exact: true }).click()
     await page.waitForTimeout(100)
 
     await page.mouse.click(700, 200)
@@ -4181,9 +4230,7 @@ test.describe('Sketch tests', () => {
       page.getByRole('button', { name: 'Exit Sketch' })
     ).toBeVisible()
 
-    await expect(
-      page.getByText('click plane or face to sketch on')
-    ).toBeVisible()
+    await expect(page.getByText('select a plane or face')).toBeVisible()
 
     await page.keyboard.press('Escape')
     await expect(
@@ -4734,7 +4781,7 @@ test.describe('Sketch tests', () => {
       await expect(page.locator('.cm-content')).toHaveText(code)
       // Assert the tool was unequipped
       await expect(
-        page.getByRole('button', { name: 'Line' })
+        page.getByRole('button', { name: 'Line', exact: true })
       ).not.toHaveAttribute('aria-pressed', 'true')
 
       // exit sketch
@@ -4896,8 +4943,7 @@ test.describe('Testing constraints', () => {
     await page.mouse.click(834, 244)
     await page.keyboard.up('Shift')
 
-    await page.getByRole('button', { name: 'Constraints', exact: true }).click()
-    await page.getByRole('button', { name: 'length', exact: true }).click()
+    await page.getByRole('button', { name: 'Length', exact: true }).click()
     await page.getByText('Add constraining value').click()
 
     await expect(page.locator('.cm-content')).toHaveText(
@@ -4927,13 +4973,13 @@ const part001 = startSketchOn('XZ')
   |> startProfileAt([-7.54, -26.74], %)
   |> line([74.36, 130.4], %, $seg01)
   |> line([78.92, -120.11], %)
-  |> angledLine([segAng(seg01, %), yo], %)
+  |> angledLine([segAng(seg01), yo], %)
   |> line([41.19, 28.97 + 5], %)
 const part002 = startSketchOn('XZ')
   |> startProfileAt([299.05, 231.45], %)
   |> xLine(-425.34, %, $seg_what)
   |> yLine(-264.06, %)
-  |> xLine(segLen(seg_what, %), %)
+  |> xLine(segLen(seg_what), %)
   |> lineTo([profileStartX(%), profileStartY(%)], %)`
       )
     })
@@ -4951,12 +4997,10 @@ const part002 = startSketchOn('XZ')
     await page.waitForTimeout(100) // this wait is needed for webkit - not sure why
     await page
       .getByRole('button', {
-        name: 'Constraints',
+        name: 'Length: open menu',
       })
       .click()
-    await page
-      .getByRole('button', { name: 'remove constraints', exact: true })
-      .click()
+    await page.getByRole('button', { name: 'remove constraints' }).click()
 
     await page.getByText('line([39.13, 68.63], %)').click()
     const activeLinesContent = await page.locator('.cm-activeLine').all()
@@ -4987,13 +5031,13 @@ const part001 = startSketchOn('XZ')
   |> startProfileAt([-7.54, -26.74], %)
   |> line([74.36, 130.4], %, $seg01)
   |> line([78.92, -120.11], %)
-  |> angledLine([segAng(seg01, %), 78.33], %)
+  |> angledLine([segAng(seg01), 78.33], %)
   |> line([41.19, 28.97], %)
 const part002 = startSketchOn('XZ')
   |> startProfileAt([299.05, 231.45], %)
   |> xLine(-425.34, %, $seg_what)
   |> yLine(-264.06, %)
-  |> xLine(segLen(seg_what, %), %)
+  |> xLine(segLen(seg_what), %)
   |> lineTo([profileStartX(%), profileStartY(%)], %)`
           )
         })
@@ -5017,11 +5061,11 @@ const part002 = startSketchOn('XZ')
         await page.keyboard.up('Shift')
         await page
           .getByRole('button', {
-            name: 'Constraints',
+            name: 'Length: open menu',
           })
           .click()
         await page
-          .getByRole('button', { name: 'perpendicular distance', exact: true })
+          .getByRole('button', { name: 'Perpendicular Distance' })
           .click()
 
         const createNewVariableCheckbox = page.getByTestId(
@@ -5058,22 +5102,22 @@ const part002 = startSketchOn('XZ')
       {
         testName: 'Add variable',
         constraint: 'horizontal distance',
-        value: 'segEndX(seg01, %) + xDis001, 61.34',
+        value: 'segEndX(seg01) + xDis001, 61.34',
       },
       {
         testName: 'No variable',
         constraint: 'horizontal distance',
-        value: 'segEndX(seg01, %) + 88.08, 61.34',
+        value: 'segEndX(seg01) + 88.08, 61.34',
       },
       {
         testName: 'Add variable',
         constraint: 'vertical distance',
-        value: '154.9, segEndY(seg01, %) - yDis001',
+        value: '154.9, segEndY(seg01) - yDis001',
       },
       {
         testName: 'No variable',
         constraint: 'vertical distance',
-        value: '154.9, segEndY(seg01, %) - 42.32',
+        value: '154.9, segEndY(seg01) - 42.32',
       },
     ] as const
     for (const { testName, value, constraint } of cases) {
@@ -5092,7 +5136,7 @@ const part002 = startSketchOn('XZ')
   |> startProfileAt([299.05, 231.45], %)
   |> xLine(-425.34, %, $seg_what)
   |> yLine(-264.06, %)
-  |> xLine(segLen(seg_what, %), %)
+  |> xLine(segLen(seg_what), %)
   |> lineTo([profileStartX(%), profileStartY(%)], %)`
           )
         })
@@ -5116,12 +5160,10 @@ const part002 = startSketchOn('XZ')
         await page.keyboard.up('Shift')
         await page
           .getByRole('button', {
-            name: 'Constraints',
+            name: 'Length: open menu',
           })
           .click()
-        await page
-          .getByRole('button', { name: constraint, exact: true })
-          .click()
+        await page.getByRole('button', { name: constraint }).click()
 
         const createNewVariableCheckbox = page.getByTestId(
           'create-new-variable-checkbox'
@@ -5162,25 +5204,25 @@ const part002 = startSketchOn('XZ')
       {
         testName: 'Add variable',
         addVariable: true,
-        constraint: 'ABS X',
+        constraint: 'Absolute X',
         value: 'xDis001, 61.34',
       },
       {
         testName: 'No variable',
         addVariable: false,
-        constraint: 'ABS X',
+        constraint: 'Absolute X',
         value: '154.9, 61.34',
       },
       {
         testName: 'Add variable',
         addVariable: true,
-        constraint: 'ABS Y',
+        constraint: 'Absolute Y',
         value: '154.9, yDis001',
       },
       {
         testName: 'No variable',
         addVariable: false,
-        constraint: 'ABS Y',
+        constraint: 'Absolute Y',
         value: '154.9, 61.34',
       },
     ] as const
@@ -5200,7 +5242,7 @@ const part002 = startSketchOn('XZ')
   |> startProfileAt([299.05, 231.45], %)
   |> xLine(-425.34, %, $seg_what)
   |> yLine(-264.06, %)
-  |> xLine(segLen(seg_what, %), %)
+  |> xLine(segLen(seg_what), %)
   |> lineTo([profileStartX(%), profileStartY(%)], %)`
           )
         })
@@ -5216,7 +5258,7 @@ const part002 = startSketchOn('XZ')
           u.getSegmentBodyCoords(`[data-overlay-index="${2}"]`),
         ])
 
-        if (constraint === 'ABS X') {
+        if (constraint === 'Absolute X') {
           await page.mouse.click(600, 130)
         } else {
           await page.mouse.click(900, 250)
@@ -5227,7 +5269,7 @@ const part002 = startSketchOn('XZ')
         await page.keyboard.up('Shift')
         await page
           .getByRole('button', {
-            name: 'Constraints',
+            name: 'Length: open menu',
           })
           .click()
         await page
@@ -5270,13 +5312,13 @@ const part002 = startSketchOn('XZ')
         testName: 'Add variable',
         addVariable: true,
         axisSelect: false,
-        value: 'segAng(seg01, %) + angle001',
+        value: 'segAng(seg01) + angle001',
       },
       {
         testName: 'No variable',
         addVariable: false,
         axisSelect: false,
-        value: 'segAng(seg01, %) + 22.69',
+        value: 'segAng(seg01) + 22.69',
       },
       {
         testName: 'Add variable, selecting axis',
@@ -5307,7 +5349,7 @@ const part002 = startSketchOn('XZ')
   |> startProfileAt([299.05, 231.45], %)
   |> xLine(-425.34, %, $seg_what)
   |> yLine(-264.06, %)
-  |> xLine(segLen(seg_what, %), %)
+  |> xLine(segLen(seg_what), %)
   |> lineTo([profileStartX(%), profileStartY(%)], %)`
           )
         })
@@ -5335,10 +5377,10 @@ const part002 = startSketchOn('XZ')
         await page.keyboard.up('Shift')
         await page
           .getByRole('button', {
-            name: 'Constraints',
+            name: 'Length: open menu',
           })
           .click()
-        await page.getByTestId('angle').click()
+        await page.getByTestId('dropdown-constraint-angle').click()
 
         const createNewVariableCheckbox = page.getByTestId(
           'create-new-variable-checkbox'
@@ -5417,7 +5459,7 @@ const part002 = startSketchOn('XZ')
   |> startProfileAt([299.05, 231.45], %)
   |> xLine(-425.34, %, $seg_what)
   |> yLine(-264.06, %)
-  |> xLine(segLen(seg_what, %), %)
+  |> xLine(segLen(seg_what), %)
   |> lineTo([profileStartX(%), profileStartY(%)], %)`
           )
         })
@@ -5436,10 +5478,10 @@ const part002 = startSketchOn('XZ')
         await page.mouse.click(line3.x, line3.y)
         await page
           .getByRole('button', {
-            name: 'Constraints',
+            name: 'Length: open menu',
           })
           .click()
-        await page.getByTestId(constraint).click()
+        await page.getByTestId('dropdown-constraint-' + constraint).click()
 
         if (!addVariable) {
           await page.getByTestId('create-new-variable-checkbox').click()
@@ -5493,7 +5535,7 @@ const part002 = startSketchOn('XZ')
   |> startProfileAt([299.05, 231.45], %)
   |> xLine(-425.34, %, $seg_what)
   |> yLine(-264.06, %)
-  |> xLine(segLen(seg_what, %), %)
+  |> xLine(segLen(seg_what), %)
   |> lineTo([profileStartX(%), profileStartY(%)], %)`
           )
         })
@@ -5527,7 +5569,7 @@ const part002 = startSketchOn('XZ')
         await expect(activeLinesContent).toHaveLength(codeAfter.length)
 
         const constraintMenuButton = page.getByRole('button', {
-          name: 'Constraints',
+          name: 'Length: open menu',
         })
         const constraintButton = page
           .getByRole('button', {
@@ -5558,19 +5600,19 @@ const part002 = startSketchOn('XZ')
   test.describe('Two segment - no modal constraints', () => {
     const cases = [
       {
-        codeAfter: `|> angledLine([83, segLen(seg01, %)], %)`,
+        codeAfter: `|> angledLine([83, segLen(seg01)], %)`,
         constraintName: 'Equal Length',
       },
       {
-        codeAfter: `|> angledLine([segAng(seg01, %), 78.33], %)`,
+        codeAfter: `|> angledLine([segAng(seg01), 78.33], %)`,
         constraintName: 'Parallel',
       },
       {
-        codeAfter: `|> lineTo([segEndX(seg01, %), 61.34], %)`,
+        codeAfter: `|> lineTo([segEndX(seg01), 61.34], %)`,
         constraintName: 'Vertically Align',
       },
       {
-        codeAfter: `|> lineTo([154.9, segEndY(seg01, %)], %)`,
+        codeAfter: `|> lineTo([154.9, segEndY(seg01)], %)`,
         constraintName: 'Horizontally Align',
       },
     ] as const
@@ -5589,7 +5631,7 @@ const part002 = startSketchOn('XZ')
   |> startProfileAt([299.05, 231.45], %)
   |> xLine(-425.34, %, $seg_what)
   |> yLine(-264.06, %)
-  |> xLine(segLen(seg_what, %), %)
+  |> xLine(segLen(seg_what), %)
   |> lineTo([profileStartX(%), profileStartY(%)], %)`
           )
         })
@@ -5610,7 +5652,7 @@ const part002 = startSketchOn('XZ')
         await page.mouse.click(line3.x - 3, line3.y + 20)
         await page.keyboard.up('Shift')
         const constraintMenuButton = page.getByRole('button', {
-          name: 'Constraints',
+          name: 'Length: open menu',
         })
         const constraintButton = page.getByRole('button', {
           name: constraintName,
@@ -5666,7 +5708,7 @@ const part002 = startSketchOn('XZ')
   |> startProfileAt([299.05, 231.45], %)
   |> xLine(-425.34, %, $seg_what)
   |> yLine(-264.06, %)
-  |> xLine(segLen(seg_what, %), %)
+  |> xLine(segLen(seg_what), %)
   |> lineTo([profileStartX(%), profileStartY(%)], %)`
           )
         })
@@ -5687,7 +5729,7 @@ const part002 = startSketchOn('XZ')
         await page.mouse.click(axisClick.x, axisClick.y)
         await page.keyboard.up('Shift')
         const constraintMenuButton = page.getByRole('button', {
-          name: 'Constraints',
+          name: 'Length: open menu',
         })
         const constraintButton = page.getByRole('button', {
           name: constraintName,
@@ -5746,10 +5788,10 @@ const part002 = startSketchOn('XZ')
 
     await page
       .getByRole('button', {
-        name: 'Constraints',
+        name: 'Length: open menu',
       })
       .click()
-    await page.getByRole('button', { name: 'horizontal', exact: true }).click()
+    await page.getByRole('button', { name: 'Horizontal', exact: true }).click()
 
     let activeLinesContent = await page.locator('.cm-activeLine').all()
     await expect(activeLinesContent[0]).toHaveText(`|> xLine(3.13, %)`)
@@ -5770,13 +5812,13 @@ const part002 = startSketchOn('XZ')
     await page.waitForTimeout(300)
     await page
       .getByRole('button', {
-        name: 'Constraints',
+        name: 'Length: open menu',
       })
       .click()
     // await expect(page.getByRole('button', { name: 'length', exact: true })).toBeVisible()
     await page.waitForTimeout(200)
     // await page.getByRole('button', { name: 'length', exact: true }).click()
-    await page.locator('[data-testid="length"]').click()
+    await page.getByTestId('dropdown-constraint-length').click()
 
     await page.getByLabel('length Value').fill('10')
     await page.getByRole('button', { name: 'Add constraining value' }).click()
@@ -6834,8 +6876,8 @@ const part001 = startSketchOn('XZ')
   |> startProfileAt([5, 6], %)
   |> ${lineToBeDeleted}
   |> line([-10, -15], %)
-  |> angledLine([-176, segLen(seg01, %)], %)        
-${extraLine ? 'const myVar = segLen(seg01, part001)' : ''}`
+  |> angledLine([-176, segLen(seg01)], %)        
+${extraLine ? 'const myVar = segLen(seg01)' : ''}`
               )
             },
             {
@@ -6994,7 +7036,7 @@ ${extraLine ? 'const myVar = segLen(seg01, part001)' : ''}`
   |> startProfileAt([5, 6], %)
   |> ${lineToBeDeleted}
   |> line([-10, -15], %)
-  |> angledLine([-176, segLen(seg01, %)], %)`
+  |> angledLine([-176, segLen(seg01)], %)`
             )
           },
           {
@@ -7068,6 +7110,8 @@ test.describe('Test network and connection issues', () => {
 
     await u.waitForAuthSkipAppStart()
 
+    const networkToggle = page.getByTestId('network-toggle')
+
     // This is how we wait until the stream is online
     await expect(
       page.getByRole('button', { name: 'Start Sketch' })
@@ -7081,7 +7125,7 @@ test.describe('Test network and connection issues', () => {
     await expect(networkPopover).not.toBeVisible()
 
     // (First check) Expect the network to be up
-    await expect(page.getByText('Network Health (Connected)')).toBeVisible()
+    await expect(networkToggle).toContainText('Connected')
 
     // Click the network widget
     await networkWidget.click()
@@ -7103,7 +7147,7 @@ test.describe('Test network and connection issues', () => {
     })
 
     // Expect the network to be down
-    await expect(page.getByText('Network Health (Offline)')).toBeVisible()
+    await expect(networkToggle).toContainText('Offline')
 
     // Click the network widget
     await networkWidget.click()
@@ -7129,7 +7173,7 @@ test.describe('Test network and connection issues', () => {
     ).not.toBeDisabled({ timeout: 15000 })
 
     // (Second check) expect the network to be up
-    await expect(page.getByText('Network Health (Connected)')).toBeVisible()
+    await expect(networkToggle).toContainText('Connected')
   })
 
   test('Engine disconnect & reconnect in sketch mode', async ({
@@ -7141,6 +7185,8 @@ test.describe('Test network and connection issues', () => {
       browserName === 'webkit',
       'Skip on Safari until `window.tearDown` is working there'
     )
+    const networkToggle = page.getByTestId('network-toggle')
+
     const u = await getUtils(page)
     await page.setViewportSize({ width: 1200, height: 500 })
     const PUR = 400 / 37.5 //pixeltoUnitRatio
@@ -7183,7 +7229,7 @@ test.describe('Test network and connection issues', () => {
     |> line([${commonPoints.num1}, 0], %)`)
 
     // Expect the network to be up
-    await expect(page.getByText('Network Health (Connected)')).toBeVisible()
+    await expect(networkToggle).toContainText('Connected')
 
     // simulate network down
     await u.emulateNetworkConditions({
@@ -7195,7 +7241,7 @@ test.describe('Test network and connection issues', () => {
     })
 
     // Expect the network to be down
-    await expect(page.getByText('Network Health (Offline)')).toBeVisible()
+    await expect(networkToggle).toContainText('Offline')
 
     // Ensure we are not in sketch mode
     await expect(
@@ -7220,7 +7266,8 @@ test.describe('Test network and connection issues', () => {
     ).not.toBeDisabled({ timeout: 15000 })
 
     // Expect the network to be up
-    await expect(page.getByText('Network Health (Connected)')).toBeVisible()
+    await expect(networkToggle).toContainText('Connected')
+    await expect(page.getByTestId('loading-stream')).not.toBeAttached()
 
     // Click off the code pane.
     await page.mouse.click(100, 100)
@@ -7236,7 +7283,7 @@ test.describe('Test network and connection issues', () => {
     await page.waitForTimeout(150)
 
     // Click the line tool
-    await page.getByRole('button', { name: 'Line' }).click()
+    await page.getByRole('button', { name: 'Line', exact: true }).click()
 
     await page.waitForTimeout(150)
 
@@ -7246,15 +7293,15 @@ test.describe('Test network and connection issues', () => {
       .toHaveText(`const sketch001 = startSketchOn('XZ')
     |> startProfileAt(${commonPoints.startAt}, %)
     |> line([${commonPoints.num1}, 0], %)
-    |> line([-9.16, 8.81], %)`)
+    |> line([-8.84, 8.75], %)`)
     await page.waitForTimeout(100)
     await page.mouse.click(startXPx, 500 - PUR * 20)
     await expect(page.locator('.cm-content'))
       .toHaveText(`const sketch001 = startSketchOn('XZ')
     |> startProfileAt(${commonPoints.startAt}, %)
     |> line([${commonPoints.num1}, 0], %)
-    |> line([-9.16, 8.81], %)
-    |> line([-5.28, 0], %)`)
+    |> line([-8.84, 8.75], %)
+    |> line([-5.6, 0], %)`)
 
     // Unequip line tool
     await page.keyboard.press('Escape')
@@ -7263,7 +7310,7 @@ test.describe('Test network and connection issues', () => {
       page.getByRole('button', { name: 'Exit Sketch' })
     ).toBeVisible()
     await expect(
-      page.getByRole('button', { name: 'Line' })
+      page.getByRole('button', { name: 'Line', exact: true })
     ).not.toHaveAttribute('aria-pressed', 'true')
 
     // Exit sketch
@@ -7564,19 +7611,19 @@ const part001 = startSketchOn('-XZ')
         offset: -armThick,
         intersectTag: seg04
       }, %)
-  |> angledLineToY([segAng(seg04, %) + 180, ZERO], %)
+  |> angledLineToY([segAng(seg04) + 180, ZERO], %)
   |> angledLineToY({
         angle: -bottomAng,
         to: -totalHeightHalf - armThick,
       }, %, $seg02)
-  |> xLineTo(segEndX(seg03, %) + 0, %)
-  |> yLine(-segLen(seg01, %), %)
+  |> xLineTo(segEndX(seg03) + 0, %)
+  |> yLine(-segLen(seg01), %)
   |> angledLineThatIntersects({
         angle: HALF_TURN,
         offset: -armThick,
         intersectTag: seg02
       }, %)
-  |> angledLineToY([segAng(seg02, %) + 180, -baseHeight], %)
+  |> angledLineToY([segAng(seg02) + 180, -baseHeight], %)
   |> xLineTo(ZERO, %)
   |> close(%)
   |> extrude(4, %)`
@@ -7668,7 +7715,7 @@ test('Keyboard shortcuts can be viewed through the help menu', async ({
     .waitFor({ state: 'visible' })
 
   // Open the help menu
-  await page.getByRole('button', { name: 'Help', exact: false }).click()
+  await page.getByRole('button', { name: 'Help and resources' }).click()
 
   // Open the keyboard shortcuts
   await page.getByRole('button', { name: 'Keyboard Shortcuts' }).click()
@@ -7692,8 +7739,11 @@ test('First escape in tool pops you out of tool, second exits sketch mode', asyn
   await u.expectCmdLog('[data-message-type="execution-done"]')
   await u.closeDebugPanel()
 
-  const lineButton = page.getByRole('button', { name: 'Line' })
-  const arcButton = page.getByRole('button', { name: 'Tangential Arc' })
+  const lineButton = page.getByRole('button', { name: 'Line', exact: true })
+  const arcButton = page.getByRole('button', {
+    name: 'Tangential Arc',
+    exact: true,
+  })
 
   // Test these hotkeys perform actions when
   // focus is on the canvas
@@ -7705,6 +7755,7 @@ test('First escape in tool pops you out of tool, second exits sketch mode', asyn
   await page.mouse.move(800, 300)
   await page.mouse.click(800, 300)
   await page.waitForTimeout(1000)
+  await expect(lineButton).toBeVisible()
   await expect(lineButton).toHaveAttribute('aria-pressed', 'true')
 
   // Draw a line
@@ -7774,9 +7825,12 @@ test('Basic default modeling and sketch hotkeys work', async ({ page }) => {
   await u.closeDebugPanel()
 
   const codePane = page.getByRole('textbox').locator('div')
-  const codePaneButton = page.getByRole('tab', { name: 'KCL Code' })
-  const lineButton = page.getByRole('button', { name: 'Line' })
-  const arcButton = page.getByRole('button', { name: 'Tangential Arc' })
+  const codePaneButton = page.getByTestId('code-pane-button')
+  const lineButton = page.getByRole('button', { name: 'Line', exact: true })
+  const arcButton = page.getByRole('button', {
+    name: 'Tangential Arc',
+    exact: true,
+  })
   const extrudeButton = page.getByRole('button', { name: 'Extrude' })
 
   // Test that the hotkeys do nothing when
@@ -7797,7 +7851,7 @@ test('Basic default modeling and sketch hotkeys work', async ({ page }) => {
   await page.mouse.click(600, 250)
 
   // work-around: to stop "keyboard.press('s')" from typing in the editor even when it should be blurred
-  await page.getByRole('button', { name: 'Commands ⌘K' }).click()
+  await page.getByRole('button', { name: 'Commands' }).click()
   await page.waitForTimeout(100)
   await page.keyboard.press('Escape')
   await page.waitForTimeout(100)
@@ -8043,3 +8097,34 @@ test('Sketch on face', async ({ page }) => {
 const sketch002 = extrude(${[5, 5]} + 7, sketch002)`
   await expect(page.locator('.cm-content')).toHaveText(result2.regExp)
 })
+
+test('Typing KCL errors induces a badge on the error logs pane button', async ({
+  page,
+}) => {
+  const u = await getUtils(page)
+
+  // Load the app with the working starter code
+  await page.addInitScript((code) => {
+    localStorage.setItem('persistCode', code)
+  }, bracket)
+
+  await page.setViewportSize({ width: 1200, height: 500 })
+  await u.waitForAuthSkipAppStart()
+
+  // wait for execution done
+  await u.openDebugPanel()
+  await u.expectCmdLog('[data-message-type="execution-done"]')
+  await u.closeDebugPanel()
+
+  // Ensure no badge is present
+  const errorLogsButton = page.getByRole('button', { name: 'KCL Code pane' })
+  await expect(errorLogsButton).not.toContainText('notification')
+
+  // Delete a character to break the KCL
+  await u.openKclCodePanel()
+  await page.getByText('extrude(').click()
+  await page.keyboard.press('Backspace')
+
+  // Ensure that a badge appears on the button
+  await expect(errorLogsButton).toContainText('notification')
+})

e2e/playwright/snapshot-tests.spec.ts

@@ -64,27 +64,27 @@ const part001 = startSketchOn('-XZ')
   |> angledLineToY({
         angle: topAng,
         to: totalHeightHalf,
-      }, %, 'seg04')
-  |> xLineTo(totalLen, %, 'seg03')
-  |> yLine(-armThick, %, 'seg01')
+      }, %, $seg04)
+  |> xLineTo(totalLen, %, $seg03')
+  |> yLine(-armThick, %, $seg01)
   |> angledLineThatIntersects({
         angle: HALF_TURN,
         offset: -armThick,
-        intersectTag: 'seg04'
+        intersectTag: seg04
       }, %)
-  |> angledLineToY([segAng('seg04', %) + 180, ZERO], %)
+  |> angledLineToY([segAng(seg04, %) + 180, ZERO], %)
   |> angledLineToY({
         angle: -bottomAng,
         to: -totalHeightHalf - armThick,
-      }, %, 'seg02')
-  |> xLineTo(segEndX('seg03', %) + 0, %)
-  |> yLine(-segLen('seg01', %), %)
+      }, %, $seg02)
+  |> xLineTo(segEndX(seg03, %) + 0, %)
+  |> yLine(-segLen(seg01, %), %)
   |> angledLineThatIntersects({
         angle: HALF_TURN,
         offset: -armThick,
-        intersectTag: 'seg02'
+        intersectTag: seg02
       }, %)
-  |> angledLineToY([segAng('seg02', %) + 180, -baseHeight], %)
+  |> angledLineToY([segAng(seg02, %) + 180, -baseHeight], %)
   |> xLineTo(ZERO, %)
   |> close(%)
   |> extrude(4, %)`
@@ -431,7 +431,9 @@ test('Draft segments should look right', async ({ page, context }) => {
   |> line([7.25, 0], %)`
   await expect(page.locator('.cm-content')).toHaveText(code)
 
-  await page.getByRole('button', { name: 'Tangential Arc' }).click()
+  await page
+    .getByRole('button', { name: 'Tangential Arc', exact: true })
+    .click()
 
   await page.mouse.move(startXPx + PUR * 30, 500 - PUR * 20, { steps: 10 })
 
@@ -475,8 +477,10 @@ test('Draft rectangles should look right', async ({ page, context }) => {
   const startXPx = 600
 
   // Equip the rectangle tool
-  await page.getByRole('button', { name: 'Line' }).click()
-  await page.getByRole('button', { name: 'Rectangle' }).click()
+  await page.getByRole('button', { name: 'Line', exact: true }).click()
+  await page
+    .getByRole('button', { name: 'Corner rectangle', exact: true })
+    .click()
 
   // Draw the rectangle
   await page.mouse.click(startXPx + PUR * 20, 500 - PUR * 30)
@@ -535,7 +539,9 @@ test.describe('Client side scene scale should match engine scale', () => {
   |> line([7.25, 0], %)`
     await expect(u.codeLocator).toHaveText(code)
 
-    await page.getByRole('button', { name: 'Tangential Arc' }).click()
+    await page
+      .getByRole('button', { name: 'Tangential Arc', exact: true })
+      .click()
     await page.waitForTimeout(100)
 
     await page.mouse.click(startXPx + PUR * 30, 500 - PUR * 20)
@@ -545,7 +551,9 @@ test.describe('Client side scene scale should match engine scale', () => {
     await expect(u.codeLocator).toHaveText(code)
 
     // click tangential arc tool again to unequip it
-    await page.getByRole('button', { name: 'Tangential Arc' }).click()
+    await page
+      .getByRole('button', { name: 'Tangential Arc', exact: true })
+      .click()
     await page.waitForTimeout(100)
 
     // screen shot should show the sketch
@@ -634,7 +642,9 @@ test.describe('Client side scene scale should match engine scale', () => {
   |> line([184.3, 0], %)`
     await expect(u.codeLocator).toHaveText(code)
 
-    await page.getByRole('button', { name: 'Tangential Arc' }).click()
+    await page
+      .getByRole('button', { name: 'Tangential Arc', exact: true })
+      .click()
     await page.waitForTimeout(100)
 
     await page.mouse.click(startXPx + PUR * 30, 500 - PUR * 20)
@@ -643,7 +653,9 @@ test.describe('Client side scene scale should match engine scale', () => {
   |> tangentialArcTo([551.2, -62.01], %)`
     await expect(u.codeLocator).toHaveText(code)
 
-    await page.getByRole('button', { name: 'Tangential Arc' }).click()
+    await page
+      .getByRole('button', { name: 'Tangential Arc', exact: true })
+      .click()
     await page.waitForTimeout(100)
 
     // screen shot should show the sketch

e2e/playwright/storageStates.ts

@@ -71,7 +71,7 @@ export const TEST_CODE_GIZMO = `const part001 = startSketchOn('XZ')
 |> angledLine({ angle: 3 + 0, length: 3.14 + 0 }, %)
 |> lineTo([20.14 + 0, -0.14 + 0], %)
 |> xLineTo(29 + 0, %)
-|> yLine(-3.14 + 0, %, 'a')
+|> yLine(-3.14 + 0, %, $a)
 |> xLine(1.63, %)
 |> angledLineOfXLength({ angle: 3 + 0, length: 3.14 }, %)
 |> angledLineOfYLength({ angle: 30, length: 3 + 0 }, %)
@@ -79,7 +79,7 @@ export const TEST_CODE_GIZMO = `const part001 = startSketchOn('XZ')
 |> angledLineToY({ angle: 30, to: 11.14 }, %)
 |> angledLineThatIntersects({
   angle: 3.14,
-  intersectTag: 'a',
+  intersectTag: a,
   offset: 0
 }, %)
 |> tangentialArcTo([13.14 + 0, 13.14], %)

e2e/playwright/test-utils.ts

@@ -1,5 +1,5 @@
-import { test, expect, Page, Download } from '@playwright/test'
-import { EngineCommand } from '../../src/lang/std/engineConnection'
+import { expect, Page, Download } from '@playwright/test'
+import { EngineCommand } from 'lang/std/artifactMap'
 import os from 'os'
 import fsp from 'fs/promises'
 import pixelMatch from 'pixelmatch'
@@ -16,14 +16,14 @@ export const TEST_COLORS = {
 } as const
 
 async function waitForPageLoad(page: Page) {
-  // wait for 'Loading stream...' spinner
-  await page.getByTestId('loading-stream').waitFor()
   // wait for all spinners to be gone
-  await page
-    .getByTestId('loading')
-    .waitFor({ state: 'detached', timeout: 20_000 })
+  await expect(page.getByTestId('loading')).not.toBeAttached({
+    timeout: 20_000,
+  })
 
-  await page.getByTestId('start-sketch').waitFor()
+  await expect(page.getByRole('button', { name: 'Start Sketch' })).toBeEnabled({
+    timeout: 20_000,
+  })
 }
 
 async function removeCurrentCode(page: Page) {
@@ -58,44 +58,45 @@ async function waitForDefaultPlanesToBeVisible(page: Page) {
 }
 
 async function openKclCodePanel(page: Page) {
-  const paneLocator = page.getByRole('tab', { name: 'KCL Code', exact: false })
-  const isOpen = (await paneLocator?.getAttribute('aria-selected')) === 'true'
+  const paneLocator = page.getByTestId('code-pane-button')
+  const ariaSelected = await paneLocator?.getAttribute('aria-pressed')
+  const isOpen = ariaSelected === 'true'
 
   if (!isOpen) {
     await paneLocator.click()
-    await paneLocator.and(page.locator('[aria-selected="true"]')).waitFor()
+    await expect(paneLocator).toHaveAttribute('aria-pressed', 'true')
   }
 }
 
 async function closeKclCodePanel(page: Page) {
-  const paneLocator = page.getByRole('tab', { name: 'KCL Code', exact: false })
-  const isOpen = (await paneLocator?.getAttribute('aria-selected')) === 'true'
+  const paneLocator = page.getByTestId('code-pane-button')
+  const ariaSelected = await paneLocator?.getAttribute('aria-pressed')
+  const isOpen = ariaSelected === 'true'
+
   if (isOpen) {
     await paneLocator.click()
-    await paneLocator
-      .and(page.locator(':not([aria-selected="true"])'))
-      .waitFor()
+    await expect(paneLocator).not.toHaveAttribute('aria-pressed', 'true')
   }
 }
 
 async function openDebugPanel(page: Page) {
-  const debugLocator = page.getByRole('tab', { name: 'Debug', exact: false })
-  const isOpen = (await debugLocator?.getAttribute('aria-selected')) === 'true'
+  const debugLocator = page.getByTestId('debug-pane-button')
+  await expect(debugLocator).toBeVisible()
+  const isOpen = (await debugLocator?.getAttribute('aria-pressed')) === 'true'
 
   if (!isOpen) {
     await debugLocator.click()
-    await debugLocator.and(page.locator('[aria-selected="true"]')).waitFor()
+    await expect(debugLocator).toHaveAttribute('aria-pressed', 'true')
   }
 }
 
 async function closeDebugPanel(page: Page) {
-  const debugLocator = page.getByRole('tab', { name: 'Debug', exact: false })
-  const isOpen = (await debugLocator?.getAttribute('aria-selected')) === 'true'
+  const debugLocator = page.getByTestId('debug-pane-button')
+  await expect(debugLocator).toBeVisible()
+  const isOpen = (await debugLocator?.getAttribute('aria-pressed')) === 'true'
   if (isOpen) {
     await debugLocator.click()
-    await debugLocator
-      .and(page.locator(':not([aria-selected="true"])'))
-      .waitFor()
+    await expect(debugLocator).not.toHaveAttribute('aria-pressed', 'true')
   }
 }
 
@@ -265,7 +266,7 @@ export async function getUtils(page: Page) {
     getSegmentBodyCoords: async (locator: string, px = 30) => {
       const overlay = page.locator(locator)
       const bbox = await overlay
-        .boundingBox()
+        .boundingBox({ timeout: 5000 })
         .then((box) => ({ ...box, x: box?.x || 0, y: box?.y || 0 }))
       const angle = Number(await overlay.getAttribute('data-overlay-angle'))
       const angleXOffset = Math.cos(((angle - 180) * Math.PI) / 180) * px
@@ -471,8 +472,11 @@ export const doExport = async (
   page: Page
 ): Promise<Paths> => {
   await page.getByRole('button', { name: APP_NAME }).click()
-  await expect(page.getByRole('button', { name: 'Export Part' })).toBeVisible()
-  await page.getByRole('button', { name: 'Export Part' }).click()
+  const exportMenuButton = page.getByRole('button', {
+    name: 'Export current part',
+  })
+  await expect(exportMenuButton).toBeVisible()
+  await exportMenuButton.click()
   await expect(page.getByTestId('command-bar')).toBeVisible()
 
   // Go through export via command bar

e2e/tauri/specs/app.spec.ts

@@ -77,7 +77,7 @@ describe('ZMA authorized user flows', () => {
     const menuButton = await $('[data-testid="user-sidebar-toggle"]')
     await click(menuButton)
 
-    const settingsButton = await $('[data-testid="settings-button"]')
+    const settingsButton = await $('[data-testid="user-settings"]')
     await click(settingsButton)
 
     const projectDirInput = await $('[data-testid="project-directory-input"]')

package.json

@@ -1,6 +1,6 @@
 {
   "name": "untitled-app",
-  "version": "0.24.3",
+  "version": "0.24.7",
   "private": true,
   "dependencies": {
     "@codemirror/autocomplete": "^6.17.0",
@@ -109,7 +109,7 @@
   },
   "devDependencies": {
     "@babel/plugin-proposal-private-property-in-object": "^7.21.11",
-    "@babel/preset-env": "^7.24.3",
+    "@babel/preset-env": "^7.25.0",
     "@iarna/toml": "^2.2.5",
     "@lezer/generator": "^1.7.1",
     "@playwright/test": "^1.45.1",

packages/codemirror-lsp-client/src/client/server-capability-registration.ts

@@ -42,8 +42,8 @@ function registerServerCapability(
   serverCapabilities: ServerCapabilities,
   registration: Registration
 ): ServerCapabilities | Error {
-  const serverCapabilitiesCopy = JSON.parse(
-    JSON.stringify(serverCapabilities)
+  const serverCapabilitiesCopy = structuredClone(
+    serverCapabilities
   ) as IFlexibleServerCapabilities
   const { method, registerOptions } = registration
   const providerName = ServerCapabilitiesProviders[method]
@@ -54,7 +54,7 @@ function registerServerCapability(
     } else {
       serverCapabilitiesCopy[providerName] = Object.assign(
         {},
-        JSON.parse(JSON.stringify(registerOptions))
+        structuredClone(registerOptions)
       )
     }
   } else {
@@ -68,8 +68,8 @@ function unregisterServerCapability(
   serverCapabilities: ServerCapabilities,
   unregistration: Unregistration
 ): ServerCapabilities {
-  const serverCapabilitiesCopy = JSON.parse(
-    JSON.stringify(serverCapabilities)
+  const serverCapabilitiesCopy = structuredClone(
+    serverCapabilities
   ) as IFlexibleServerCapabilities
   const { method } = unregistration
   const providerName = ServerCapabilitiesProviders[method]

packages/codemirror-lsp-client/src/plugin/hover.ts

@@ -1,5 +1,10 @@
 import { Extension } from '@codemirror/state'
-import { hoverTooltip, tooltips, ViewPlugin } from '@codemirror/view'
+import {
+  hoverTooltip,
+  tooltips,
+  ViewPlugin,
+  EditorView,
+} from '@codemirror/view'
 
 import { LanguageServerPlugin } from './lsp'
 import { offsetToPos } from './util'
@@ -17,6 +22,13 @@ export default function lspHoverExt(
     }),
     tooltips({
       position: 'absolute',
+      parent: document.body,
+    }),
+    EditorView.baseTheme({
+      '.cm-tooltip': {
+        fontSize: '12px',
+        maxWidth: '400px',
+      },
     }),
   ]
 }

packages/codemirror-lsp-client/src/plugin/lint.ts

@@ -1,12 +0,0 @@
-import { Extension } from '@codemirror/state'
-import { linter, forEachDiagnostic, Diagnostic } from '@codemirror/lint'
-
-export default function lspLintExt(): Extension {
-  return linter((view) => {
-    let diagnostics: Diagnostic[] = []
-    forEachDiagnostic(view.state, (d: Diagnostic, from: number, to: number) => {
-      diagnostics.push(d)
-    })
-    return diagnostics
-  })
-}

packages/codemirror-lsp-client/src/plugin/lsp.ts

@@ -18,6 +18,7 @@ import type {
   ViewPlugin,
 } from '@codemirror/view'
 import { EditorView, Tooltip } from '@codemirror/view'
+import { linter } from '@codemirror/lint'
 
 import type { PublishDiagnosticsParams } from 'vscode-languageserver-protocol'
 import type * as LSP from 'vscode-languageserver-protocol'
@@ -35,7 +36,6 @@ import lspAutocompleteExt from './autocomplete'
 import lspHoverExt from './hover'
 import lspFormatExt from './format'
 import lspIndentExt from './indent'
-import lspLintExt from './lint'
 import lspSemanticTokensExt from './semantic-tokens'
 
 const useLast = (values: readonly any[]) => values.reduce((_, v) => v, '')
@@ -214,6 +214,7 @@ export class LanguageServerPlugin implements PluginValue {
     }
 
     if (!this.client.ready) return
+
     try {
       // Update the state (not the editor) with the new code.
       this.client.textDocumentDidChange({
@@ -571,8 +572,8 @@ export class LanguageServerPluginSpec
       lspFormatExt(plugin),
       lspHoverExt(plugin),
       lspIndentExt(),
-      lspLintExt(),
       lspSemanticTokensExt(),
+      linter(null),
     ]
   }
 }

playwright.config.ts

@@ -23,6 +23,7 @@ export default defineConfig({
   reporter: [
     [process.env.CI ? 'dot' : 'list'],
     ['json', { outputFile: './test-results/report.json' }],
+    ['html'],
   ],
   /* Shared settings for all the projects below. See https://playwright.dev/docs/api/class-testoptions. */
   use: {

src-tauri/Cargo.lock

@@ -188,7 +188,7 @@ dependencies = [
  "tauri-plugin-shell",
  "tauri-plugin-updater",
  "tokio",
- "toml 0.8.14",
+ "toml 0.8.19",
  "url",
 ]
 
@@ -332,7 +332,7 @@ checksum = "3b43422f69d8ff38f95f1b2bb76517c91589a924d1559a0e935d7c8ce0274c11"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -367,7 +367,7 @@ checksum = "6e0c28dcc82d7c8ead5cb13beb15405b57b8546e93215673ff8ca0349a028107"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -407,7 +407,7 @@ checksum = "3c87f3f15e7794432337fc718554eaa4dc8f04c9677a950ffe366f20a162ae42"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -550,7 +550,7 @@ dependencies = [
  "proc-macro-crate 3.1.0",
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
  "syn_derive",
 ]
 
@@ -648,6 +648,12 @@ version = "1.5.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "1fd0f2584146f6f2ef48085050886acf353beff7305ebd1ae69500e27c67f64b"
 
+[[package]]
+name = "byteorder-lite"
+version = "0.1.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "8f1fe948ff07f4bd06c30984e69f5b4899c516a3ef74f34df92a2df2ab535495"
+
 [[package]]
 name = "bytes"
 version = "1.6.0"
@@ -721,7 +727,7 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "8a969e13a7589e9e3e4207e153bae624ade2b5622fb4684a4923b23ec3d57719"
 dependencies = [
  "serde",
- "toml 0.8.14",
+ "toml 0.8.19",
 ]
 
 [[package]]
@@ -792,9 +798,9 @@ dependencies = [
 
 [[package]]
 name = "clap"
-version = "4.5.9"
+version = "4.5.13"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "64acc1846d54c1fe936a78dc189c34e28d3f5afc348403f28ecf53660b9b8462"
+checksum = "0fbb260a053428790f3de475e304ff84cdbc4face759ea7a3e64c1edd938a7fc"
 dependencies = [
  "clap_builder",
  "clap_derive",
@@ -802,9 +808,9 @@ dependencies = [
 
 [[package]]
 name = "clap_builder"
-version = "4.5.9"
+version = "4.5.13"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "6fb8393d67ba2e7bfaf28a23458e4e2b543cc73a99595511eb207fdb8aede942"
+checksum = "64b17d7ea74e9f833c7dbf2cbe4fb12ff26783eda4782a8975b72f895c9b4d99"
 dependencies = [
  "anstream",
  "anstyle",
@@ -816,14 +822,14 @@ dependencies = [
 
 [[package]]
 name = "clap_derive"
-version = "4.5.8"
+version = "4.5.13"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "2bac35c6dafb060fd4d275d9a4ffae97917c13a6327903a8be2153cd964f7085"
+checksum = "501d359d5f3dcaf6ecdeee48833ae73ec6e42723a1e52419c79abf9507eec0a0"
 dependencies = [
  "heck 0.5.0",
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -1073,7 +1079,7 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "13b588ba4ac1a99f7f2964d24b3d896ddc6bf847ee3855dbd4366f058cfcd331"
 dependencies = [
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -1083,7 +1089,7 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "edb49164822f3ee45b17acd4a208cfc1251410cf0cad9a833234c9890774dd9f"
 dependencies = [
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -1107,7 +1113,7 @@ dependencies = [
  "proc-macro2",
  "quote",
  "strsim 0.10.0",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -1118,7 +1124,7 @@ checksum = "a668eda54683121533a393014d8692171709ff57a7d61f187b6e782719f8933f"
 dependencies = [
  "darling_core",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -1179,7 +1185,7 @@ checksum = "4078275de501a61ceb9e759d37bdd3d7210e654dbc167ac1a3678ef4435ed57b"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
  "synstructure",
 ]
 
@@ -1206,7 +1212,7 @@ dependencies = [
 
 [[package]]
 name = "derive-docs"
-version = "0.1.20"
+version = "0.1.21"
 dependencies = [
  "Inflector",
  "convert_case 0.6.0",
@@ -1216,7 +1222,7 @@ dependencies = [
  "regex",
  "serde",
  "serde_tokenstream",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -1227,7 +1233,7 @@ checksum = "67e77553c4162a157adbf834ebae5b415acbecbeafc7a74b0e886657506a7611"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -1288,7 +1294,7 @@ checksum = "487585f4d0c6655fe74905e2504d8ad6908e4db67f744eb140876906c2f3175d"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -1320,7 +1326,7 @@ checksum = "f2b99bf03862d7f545ebc28ddd33a665b50865f4dfd84031a393823879bd4c54"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -1383,7 +1389,7 @@ dependencies = [
  "cc",
  "memchr",
  "rustc_version",
- "toml 0.8.14",
+ "toml 0.8.19",
  "vswhom",
  "winreg 0.52.0",
 ]
@@ -1427,7 +1433,7 @@ checksum = "5c785274071b1b420972453b306eeca06acf4633829db4223b58a2a8c5953bc4"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -1588,7 +1594,7 @@ checksum = "1a5c6c585bc94aaf2c7b51dd4c2ba22680844aba4c687be581871a6f518c5742"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -1704,7 +1710,7 @@ checksum = "87750cf4b7a4c0625b1529e4c543c2182106e4dedc60a2a6455e00d212c489ac"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -1980,7 +1986,7 @@ dependencies = [
  "proc-macro-error",
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -2008,7 +2014,7 @@ dependencies = [
  "inflections",
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -2083,7 +2089,7 @@ dependencies = [
  "proc-macro-error",
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -2399,6 +2405,18 @@ dependencies = [
  "unicode-normalization",
 ]
 
+[[package]]
+name = "image"
+version = "0.25.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "99314c8a2152b8ddb211f924cdae532d8c5e4c8bb54728e12fff1b0cd5963a10"
+dependencies = [
+ "bytemuck",
+ "byteorder-lite",
+ "num-traits",
+ "png",
+]
+
 [[package]]
 name = "indexmap"
 version = "1.9.3"
@@ -2571,7 +2589,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-lib"
-version = "0.1.72"
+version = "0.2.3"
 dependencies = [
  "anyhow",
  "approx",
@@ -2581,6 +2599,7 @@ dependencies = [
  "bson",
  "chrono",
  "clap",
+ "convert_case 0.6.0",
  "dashmap 6.0.1",
  "databake",
  "derive-docs",
@@ -2588,6 +2607,7 @@ dependencies = [
  "futures",
  "git_rev",
  "gltf-json",
+ "image",
  "js-sys",
  "kittycad",
  "lazy_static",
@@ -2602,10 +2622,11 @@ dependencies = [
  "thiserror",
  "tokio",
  "tokio-tungstenite",
- "toml 0.8.14",
+ "toml 0.8.19",
  "tower-lsp",
  "ts-rs",
  "url",
+ "urlencoding",
  "uuid",
  "validator",
  "wasm-bindgen",
@@ -2628,9 +2649,9 @@ dependencies = [
 
 [[package]]
 name = "kittycad"
-version = "0.3.7"
+version = "0.3.9"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e1777b503442fa4666564cc3ab237d456df853a09648a4b2bb09622d25d021a5"
+checksum = "36b87a9cca545825ba18005c1944b8525fac28867d99984178bf22c79fb5ec25"
 dependencies = [
  "anyhow",
  "async-trait",
@@ -2930,13 +2951,14 @@ dependencies = [
 
 [[package]]
 name = "mio"
-version = "0.8.11"
+version = "1.0.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "a4a650543ca06a924e8b371db273b2756685faae30f8487da1b56505a8f78b0c"
+checksum = "4569e456d394deccd22ce1c1913e6ea0e54519f577285001215d33557431afe4"
 dependencies = [
+ "hermit-abi",
  "libc",
  "wasi 0.11.0+wasi-snapshot-preview1",
- "windows-sys 0.48.0",
+ "windows-sys 0.52.0",
 ]
 
 [[package]]
@@ -3067,16 +3089,6 @@ dependencies = [
  "autocfg",
 ]
 
-[[package]]
-name = "num_cpus"
-version = "1.16.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "4161fcb6d602d4d2081af7c3a45852d875a03dd337a6bfdd6e06407b61342a43"
-dependencies = [
- "hermit-abi",
- "libc",
-]
-
 [[package]]
 name = "num_enum"
 version = "0.5.11"
@@ -3377,7 +3389,7 @@ dependencies = [
  "regex",
  "regex-syntax 0.8.3",
  "structmeta",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -3496,7 +3508,7 @@ dependencies = [
  "phf_shared 0.11.2",
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -3528,9 +3540,9 @@ dependencies = [
 
 [[package]]
 name = "phonenumber"
-version = "0.3.5+8.13.36"
+version = "0.3.6+8.13.36"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f174c8db59b620032bd52b655fc97000458850fec0db35fcd4e802b668517ec0"
+checksum = "11756237b57b8cc5e97dc8b1e70ea436324d30e7075de63b14fd15073a8f692a"
 dependencies = [
  "bincode",
  "either",
@@ -3564,7 +3576,7 @@ checksum = "2f38a4412a78282e09a2cf38d195ea5420d15ba0602cb375210efbc877243965"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -4438,7 +4450,7 @@ dependencies = [
  "proc-macro2",
  "quote",
  "serde_derive_internals",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -4558,7 +4570,7 @@ checksum = "e0cd7e117be63d3c3678776753929474f3b04a43a080c744d6b0ae2a8c28e222"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -4569,17 +4581,18 @@ checksum = "330f01ce65a3a5fe59a60c82f3c9a024b573b8a6e875bd233fe5f934e71d54e3"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
 name = "serde_json"
-version = "1.0.120"
+version = "1.0.121"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "4e0d21c9a8cae1235ad58a00c11cb40d4b1e5c784f1ef2c537876ed6ffd8b7c5"
+checksum = "4ab380d7d9f22ef3f21ad3e6c1ebe8e4fc7a2000ccba2e4d71fc96f15b2cb609"
 dependencies = [
  "indexmap 2.2.6",
  "itoa 1.0.11",
+ "memchr",
  "ryu",
  "serde",
 ]
@@ -4602,14 +4615,14 @@ checksum = "6c64451ba24fc7a6a2d60fc75dd9c83c90903b19028d4eff35e88fc1e86564e9"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
 name = "serde_spanned"
-version = "0.6.6"
+version = "0.6.7"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "79e674e01f999af37c49f70a6ede167a8a60b2503e56c5599532a65baa5969a0"
+checksum = "eb5b1b31579f3811bf615c144393417496f152e12ac8b7663bf664f4a815306d"
 dependencies = [
  "serde",
 ]
@@ -4623,7 +4636,7 @@ dependencies = [
  "proc-macro2",
  "quote",
  "serde",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -4665,7 +4678,7 @@ dependencies = [
  "darling",
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -4933,7 +4946,7 @@ dependencies = [
  "proc-macro2",
  "quote",
  "structmeta-derive",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -4944,7 +4957,7 @@ checksum = "152a0b65a590ff6c3da95cabe2353ee04e6167c896b28e3b14478c2636c922fc"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -4966,7 +4979,7 @@ dependencies = [
  "proc-macro2",
  "quote",
  "rustversion",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -4999,9 +5012,9 @@ dependencies = [
 
 [[package]]
 name = "syn"
-version = "2.0.70"
+version = "2.0.72"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "2f0209b68b3613b093e0ec905354eccaedcfe83b8cb37cbdeae64026c3064c16"
+checksum = "dc4b9b9bf2add8093d3f2c0204471e951b2285580335de42f9d2534f3ae7a8af"
 dependencies = [
  "proc-macro2",
  "quote",
@@ -5017,7 +5030,7 @@ dependencies = [
  "proc-macro-error",
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -5034,7 +5047,7 @@ checksum = "c8af7666ab7b6390ab78131fb5b0fce11d6b7a6951602017c35fa82800708971"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -5076,7 +5089,7 @@ dependencies = [
  "cfg-expr",
  "heck 0.5.0",
  "pkg-config",
- "toml 0.8.14",
+ "toml 0.8.19",
  "version-compare",
 ]
 
@@ -5229,7 +5242,7 @@ dependencies = [
  "serde_json",
  "tauri-utils",
  "tauri-winres",
- "toml 0.8.14",
+ "toml 0.8.19",
  "walkdir",
 ]
 
@@ -5251,7 +5264,7 @@ dependencies = [
  "serde",
  "serde_json",
  "sha2",
- "syn 2.0.70",
+ "syn 2.0.72",
  "tauri-utils",
  "thiserror",
  "time",
@@ -5269,7 +5282,7 @@ dependencies = [
  "heck 0.5.0",
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
  "tauri-codegen",
  "tauri-utils",
 ]
@@ -5287,7 +5300,7 @@ dependencies = [
  "serde",
  "serde_json",
  "tauri-utils",
- "toml 0.8.14",
+ "toml 0.8.19",
  "walkdir",
 ]
 
@@ -5571,7 +5584,7 @@ dependencies = [
  "serde_with",
  "swift-rs",
  "thiserror",
- "toml 0.8.14",
+ "toml 0.8.19",
  "url",
  "urlpattern",
  "walkdir",
@@ -5627,22 +5640,22 @@ checksum = "8eaa81235c7058867fa8c0e7314f33dcce9c215f535d1913822a2b3f5e289f3c"
 
 [[package]]
 name = "thiserror"
-version = "1.0.61"
+version = "1.0.63"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c546c80d6be4bc6a00c0f01730c08df82eaa7a7a61f11d656526506112cc1709"
+checksum = "c0342370b38b6a11b6cc11d6a805569958d54cfa061a29969c3b5ce2ea405724"
 dependencies = [
  "thiserror-impl",
 ]
 
 [[package]]
 name = "thiserror-impl"
-version = "1.0.61"
+version = "1.0.63"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "46c3384250002a6d5af4d114f2845d37b57521033f30d5c3f46c4d70e1197533"
+checksum = "a4558b58466b9ad7ca0f102865eccc95938dca1a74a856f2b57b6629050da261"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -5714,33 +5727,32 @@ checksum = "1f3ccbac311fea05f86f61904b462b55fb3df8837a366dfc601a0161d0532f20"
 
 [[package]]
 name = "tokio"
-version = "1.38.0"
+version = "1.39.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ba4f4a02a7a80d6f274636f0aa95c7e383b912d41fe721a31f29e29698585a4a"
+checksum = "daa4fb1bc778bd6f04cbfc4bb2d06a7396a8f299dc33ea1900cedaa316f467b1"
 dependencies = [
  "backtrace",
  "bytes",
  "libc",
  "mio",
- "num_cpus",
  "parking_lot 0.12.1",
  "pin-project-lite",
  "signal-hook-registry",
  "socket2",
  "tokio-macros",
  "tracing",
- "windows-sys 0.48.0",
+ "windows-sys 0.52.0",
 ]
 
 [[package]]
 name = "tokio-macros"
-version = "2.3.0"
+version = "2.4.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "5f5ae998a069d4b5aba8ee9dad856af7d520c3699e6159b185c2acd48155d39a"
+checksum = "693d596312e88961bc67d7f1f97af8a70227d9f90c31bba5806eec004978d752"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -5819,21 +5831,21 @@ dependencies = [
 
 [[package]]
 name = "toml"
-version = "0.8.14"
+version = "0.8.19"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "6f49eb2ab21d2f26bd6db7bf383edc527a7ebaee412d17af4d40fdccd442f335"
+checksum = "a1ed1f98e3fdc28d6d910e6737ae6ab1a93bf1985935a1193e68f93eeb68d24e"
 dependencies = [
  "serde",
  "serde_spanned",
  "toml_datetime",
- "toml_edit 0.22.14",
+ "toml_edit 0.22.20",
 ]
 
 [[package]]
 name = "toml_datetime"
-version = "0.6.6"
+version = "0.6.8"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "4badfd56924ae69bcc9039335b2e017639ce3f9b001c393c1b2d1ef846ce2cbf"
+checksum = "0dd7358ecb8fc2f8d014bf86f6f638ce72ba252a2c3a2572f2a795f1d23efb41"
 dependencies = [
  "serde",
 ]
@@ -5875,15 +5887,15 @@ dependencies = [
 
 [[package]]
 name = "toml_edit"
-version = "0.22.14"
+version = "0.22.20"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f21c7aaf97f1bd9ca9d4f9e73b0a6c74bd5afef56f2bc931943a6e1c37e04e38"
+checksum = "583c44c02ad26b0c3f3066fe629275e50627026c51ac2e595cca4c230ce1ce1d"
 dependencies = [
  "indexmap 2.2.6",
  "serde",
  "serde_spanned",
  "toml_datetime",
- "winnow 0.6.6",
+ "winnow 0.6.18",
 ]
 
 [[package]]
@@ -5940,7 +5952,7 @@ checksum = "84fd902d4e0b9a4b27f2f440108dc034e1758628a9b702f8ec61ad66355422fa"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -5969,7 +5981,7 @@ checksum = "34704c8d6ebcbc939824180af020566b01a7c01f80641264eba0999f6c2b6be7"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -6099,7 +6111,7 @@ checksum = "c88cc88fd23b5a04528f3a8436024f20010a16ec18eb23c164b1242f65860130"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
  "termcolor",
 ]
 
@@ -6247,6 +6259,12 @@ dependencies = [
  "serde",
 ]
 
+[[package]]
+name = "urlencoding"
+version = "2.1.3"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "daf8dba3b7eb870caf1ddeed7bc9d2a049f3cfdfae7cb521b087cc33ae4c49da"
+
 [[package]]
 name = "urlpattern"
 version = "0.2.0"
@@ -6316,7 +6334,7 @@ dependencies = [
  "proc-macro-error",
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -6415,7 +6433,7 @@ dependencies = [
  "once_cell",
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
  "wasm-bindgen-shared",
 ]
 
@@ -6449,7 +6467,7 @@ checksum = "e94f17b526d0a461a191c78ea52bbce64071ed5c04c9ffe424dcb38f74171bb7"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
  "wasm-bindgen-backend",
  "wasm-bindgen-shared",
 ]
@@ -6590,7 +6608,7 @@ checksum = "ac1345798ecd8122468840bcdf1b95e5dc6d2206c5e4b0eafa078d061f59c9bc"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -6696,7 +6714,7 @@ checksum = "9107ddc059d5b6fbfbffdfa7a7fe3e22a226def0b2608f72e9d552763d3e1ad7"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -6707,7 +6725,7 @@ checksum = "29bee4b38ea3cde66011baa44dba677c432a78593e202392d1e9070cf2a7fca7"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]
@@ -6954,9 +6972,9 @@ dependencies = [
 
 [[package]]
 name = "winnow"
-version = "0.6.6"
+version = "0.6.18"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f0c976aaaa0e1f90dbb21e9587cdaf1d9679a1cde8875c0d6bd83ab96a208352"
+checksum = "68a9bda4691f099d435ad181000724da8e5899daa10713c2d432552b9ccd3a6f"
 dependencies = [
  "memchr",
 ]
@@ -7159,7 +7177,7 @@ checksum = "9ce1b18ccd8e73a9321186f97e46f9f04b778851177567b1975109d26a08d2a6"
 dependencies = [
  "proc-macro2",
  "quote",
- "syn 2.0.70",
+ "syn 2.0.72",
 ]
 
 [[package]]

src-tauri/Cargo.toml

@@ -15,7 +15,7 @@ tauri-build = { version = "2.0.0-beta.18", features = [] }
 
 [dependencies]
 anyhow = "1"
-kcl-lib = { version = "0.1.53", path = "../src/wasm-lib/kcl" }
+kcl-lib = { version = "0.2", path = "../src/wasm-lib/kcl" }
 kittycad = "0.3.7"
 log = "0.4.21"
 oauth2 = "4.4.2"

src-tauri/src/main.rs

@@ -218,7 +218,7 @@ async fn parse_project_route(configuration: Configuration, route: &str) -> Resul
 
 #[tauri::command]
 async fn read_dir_recursive(path: &str) -> Result<FileEntry, InvokeError> {
-    kcl_lib::settings::utils::walk_dir(&Path::new(path).to_path_buf())
+    kcl_lib::settings::utils::walk_dir(Path::new(path).to_path_buf())
         .await
         .map_err(InvokeError::from_anyhow)
 }

src-tauri/tauri.conf.json

@@ -80,5 +80,5 @@
     }
   },
   "productName": "Zoo Modeling App",
-  "version": "0.24.3"
+  "version": "0.24.7"
 }

src/App.tsx

@@ -2,7 +2,7 @@ import { MouseEventHandler, useEffect, useMemo, useRef } from 'react'
 import { uuidv4 } from 'lib/utils'
 import { useHotKeyListener } from './hooks/useHotKeyListener'
 import { Stream } from './components/Stream'
-import { EngineCommand } from './lang/std/engineConnection'
+import { EngineCommand } from 'lang/std/artifactMap'
 import { throttle } from './lib/utils'
 import { AppHeader } from './components/AppHeader'
 import { useHotkeys } from 'react-hotkeys-hook'
@@ -95,16 +95,16 @@ export function App() {
     })
 
     const newCmdId = uuidv4()
-    if (context.store?.buttonDownInStream === undefined) {
-      debounceSocketSend({
-        type: 'modeling_cmd_req',
-        cmd: {
-          type: 'highlight_set_entity',
-          selected_at_window: { x, y },
-        },
-        cmd_id: newCmdId,
-      })
-    }
+    if (state.matches('idle.showPlanes')) return
+    if (context.store?.buttonDownInStream !== undefined) return
+    debounceSocketSend({
+      type: 'modeling_cmd_req',
+      cmd: {
+        type: 'highlight_set_entity',
+        selected_at_window: { x, y },
+      },
+      cmd_id: newCmdId,
+    })
   }
 
   return (

src/Toolbar.tsx

@@ -1,4 +1,4 @@
-import { WheelEvent, useRef, useMemo } from 'react'
+import { useRef, useMemo, memo } from 'react'
 import { isCursorInSketchCommandRange } from 'lang/util'
 import { engineCommandManager, kclManager } from 'lib/singletons'
 import { useModelingContext } from 'hooks/useModelingContext'
@@ -12,11 +12,14 @@ import { ActionButtonDropdown } from 'components/ActionButtonDropdown'
 import { useHotkeys } from 'react-hotkeys-hook'
 import Tooltip from 'components/Tooltip'
 import { useAppState } from 'AppState'
+import { CustomIcon } from 'components/CustomIcon'
 import {
-  canRectangleTool,
-  isEditingExistingSketch,
-} from 'machines/modelingMachine'
-import { DEV } from 'env'
+  toolbarConfig,
+  ToolbarItem,
+  ToolbarItemCallbackProps,
+  ToolbarItemResolved,
+  ToolbarModeName,
+} from 'lib/toolbar'
 
 export function Toolbar({
   className = '',
@@ -25,12 +28,14 @@ export function Toolbar({
   const { state, send, context } = useModelingContext()
   const { commandBarSend } = useCommandsContext()
   const iconClassName =
-    'group-disabled:text-chalkboard-50 group-enabled:group-hover:!text-primary dark:group-enabled:group-hover:!text-inherit group-pressed:!text-chalkboard-10 group-ui-open:!text-chalkboard-10 dark:group-ui-open:!text-chalkboard-10'
-  const bgClassName =
-    'group-disabled:!bg-transparent group-enabled:group-hover:bg-primary/10 dark:group-enabled:group-hover:bg-primary group-pressed:bg-primary group-ui-open:bg-primary'
-  const buttonClassName =
-    'bg-chalkboard-10 dark:bg-chalkboard-100 enabled:hover:bg-chalkboard-10 dark:enabled:hover:bg-chalkboard-100 pressed:!border-primary ui-open:!border-primary'
-  const pathId = useMemo(() => {
+    'group-disabled:text-chalkboard-50 !text-inherit dark:group-enabled:group-hover:!text-inherit'
+  const bgClassName = '!bg-transparent'
+  const buttonBgClassName =
+    'bg-chalkboard-transparent dark:bg-transparent disabled:bg-transparent dark:disabled:bg-transparent enabled:hover:bg-chalkboard-10 dark:enabled:hover:bg-chalkboard-100 pressed:!bg-primary pressed:enabled:hover:!text-chalkboard-10'
+  const buttonBorderClassName =
+    '!border-transparent hover:!border-chalkboard-20 dark:enabled:hover:!border-primary pressed:!border-primary ui-open:!border-primary'
+
+  const sketchPathId = useMemo(() => {
     if (!isSingleCursorInPipe(context.selectionRanges, kclManager.ast)) {
       return false
     }
@@ -51,401 +56,295 @@ export function Toolbar({
     isExecuting ||
     !isStreamReady
 
-  const disableLineButton =
-    state.matches('Sketch.Rectangle tool.Awaiting second corner') ||
-    disableAllButtons
-  useHotkeys(
-    'l',
-    () =>
-      state.matches('Sketch.Line tool')
-        ? send('CancelSketch')
-        : send({
-            type: 'change tool',
-            data: { tool: 'line' },
-          }),
-    { enabled: !disableLineButton, scopes: ['sketch'] }
-  )
-  const disableTangentialArc =
-    (!isEditingExistingSketch(context) &&
-      !state.matches('Sketch.Tangential arc to')) ||
-    disableAllButtons
-  useHotkeys(
-    'a',
-    () =>
-      state.matches('Sketch.Tangential arc to')
-        ? send('CancelSketch')
-        : send({
-            type: 'change tool',
-            data: { tool: 'tangentialArc' },
-          }),
-    { enabled: !disableTangentialArc, scopes: ['sketch'] }
-  )
-  const disableRectangle =
-    (!canRectangleTool(context) && !state.matches('Sketch.Rectangle tool')) ||
-    disableAllButtons
-  useHotkeys(
-    'r',
-    () =>
-      state.matches('Sketch.Rectangle tool')
-        ? send('CancelSketch')
-        : send({
-            type: 'change tool',
-            data: { tool: 'rectangle' },
-          }),
-    { enabled: !disableRectangle, scopes: ['sketch'] }
-  )
-  useHotkeys(
-    's',
-    () =>
-      state.nextEvents.includes('Enter sketch') && pathId
-        ? send({ type: 'Enter sketch' })
-        : send({ type: 'Enter sketch', data: { forceNewSketch: true } }),
-    { enabled: !disableAllButtons, scopes: ['modeling'] }
-  )
-  useHotkeys(
-    'esc',
-    () =>
-      ['Sketch no face', 'Sketch.SketchIdle'].some(state.matches)
-        ? send('Cancel')
-        : send('CancelSketch'),
-    { enabled: !disableAllButtons, scopes: ['sketch'] }
-  )
-  useHotkeys(
-    'e',
-    () =>
-      commandBarSend({
-        type: 'Find and select command',
-        data: { name: 'Extrude', groupId: 'modeling' },
-      }),
-    { enabled: !disableAllButtons, scopes: ['modeling'] }
-  )
-  const disableFillet = !state.can('Fillet') || disableAllButtons
-  useHotkeys(
-    'f',
-    () =>
-      commandBarSend({
-        type: 'Find and select command',
-        data: { name: 'Fillet', groupId: 'modeling' },
-      }),
-    { enabled: !disableFillet, scopes: ['modeling'] }
+  const currentMode =
+    (Object.entries(toolbarConfig).find(([_, mode]) =>
+      mode.check(state)
+    )?.[0] as ToolbarModeName) || 'modeling'
+
+  /** These are the props that will be passed to the callbacks in the toolbar config
+   * They are memoized to prevent unnecessary re-renders,
+   * but they still get a lot of churn from the state machine
+   * so I think there's a lot of room for improvement here
+   */
+  const configCallbackProps: ToolbarItemCallbackProps = useMemo(
+    () => ({
+      modelingStateMatches: state.matches,
+      modelingSend: send,
+      commandBarSend,
+      sketchPathId,
+    }),
+    [state.matches, send, commandBarSend, sketchPathId]
   )
 
-  function handleToolbarButtonsWheelEvent(ev: WheelEvent<HTMLSpanElement>) {
-    const span = toolbarButtonsRef.current
-    if (!span) {
-      return
+  /**
+   * Resolve all the callbacks and values for the current mode,
+   * so we don't need to worry about the other modes
+   */
+  const currentModeItems: (
+    | ToolbarItemResolved
+    | ToolbarItemResolved[]
+    | 'break'
+  )[] = useMemo(() => {
+    return toolbarConfig[currentMode].items.map((maybeIconConfig) => {
+      if (maybeIconConfig === 'break') {
+        return 'break'
+      } else if (Array.isArray(maybeIconConfig)) {
+        return maybeIconConfig.map(resolveItemConfig)
+      } else {
+        return resolveItemConfig(maybeIconConfig)
+      }
+    })
+
+    function resolveItemConfig(
+      maybeIconConfig: ToolbarItem
+    ): ToolbarItemResolved {
+      return {
+        ...maybeIconConfig,
+        title:
+          typeof maybeIconConfig.title === 'string'
+            ? maybeIconConfig.title
+            : maybeIconConfig.title(configCallbackProps),
+        description: maybeIconConfig.description,
+        links: maybeIconConfig.links || [],
+        isActive: maybeIconConfig.isActive?.(state),
+        hotkey:
+          typeof maybeIconConfig.hotkey === 'string'
+            ? maybeIconConfig.hotkey
+            : maybeIconConfig.hotkey?.(state),
+        disabled:
+          disableAllButtons ||
+          maybeIconConfig.status !== 'available' ||
+          maybeIconConfig.disabled?.(state) === true,
+        disableHotkey: maybeIconConfig.disableHotkey?.(state),
+        status: maybeIconConfig.status,
+      }
     }
+  }, [currentMode, disableAllButtons, configCallbackProps])
 
-    span.scrollLeft = span.scrollLeft += ev.deltaY
-  }
-  const nextEvents = useMemo(() => state.nextEvents, [state.nextEvents])
-  const splitMenuItems = useMemo(
-    () =>
-      nextEvents
-        .filter(
-          (eventName) =>
-            eventName.includes('Make segment') ||
-            eventName.includes('Constrain')
-        )
-        .sort((a, b) => {
-          const aisEnabled = nextEvents
-            .filter((event) => state.can(event as any))
-            .includes(a)
-          const bIsEnabled = nextEvents
-            .filter((event) => state.can(event as any))
-            .includes(b)
-          if (aisEnabled && !bIsEnabled) {
-            return -1
-          }
-          if (!aisEnabled && bIsEnabled) {
-            return 1
-          }
-          return 0
-        })
-        .map((eventName) => ({
-          label: eventName
-            .replace('Make segment ', '')
-            .replace('Constrain ', ''),
-          onClick: () => send(eventName),
-          disabled:
-            !nextEvents
-              .filter((event) => state.can(event as any))
-              .includes(eventName) || disableAllButtons,
-        })),
-
-    [JSON.stringify(nextEvents), state]
-  )
   return (
-    <menu className="max-w-full whitespace-nowrap rounded px-1.5 py-0.5 backdrop-blur-sm bg-chalkboard-10/80 dark:bg-chalkboard-110/70 relative">
+    <menu className="max-w-full whitespace-nowrap rounded-b px-2 py-1 bg-chalkboard-10 dark:bg-chalkboard-90 relative border border-chalkboard-20 dark:border-chalkboard-80 border-t-0 shadow-sm">
       <ul
         {...props}
         ref={toolbarButtonsRef}
-        onWheel={handleToolbarButtonsWheelEvent}
-        className={'m-0 py-1 rounded-l-sm flex gap-2 items-center ' + className}
-        style={{ scrollbarWidth: 'thin' }}
+        className={
+          'has-[[aria-expanded=true]]:!pointer-events-none m-0 py-1 rounded-l-sm flex gap-1.5 items-center ' +
+          className
+        }
       >
-        {nextEvents.includes('Enter sketch') && (
-          <li className="contents">
-            <ActionButton
-              className={buttonClassName}
-              Element="button"
-              onClick={() =>
-                send({ type: 'Enter sketch', data: { forceNewSketch: true } })
-              }
-              iconStart={{
-                icon: 'sketch',
-                iconClassName,
-                bgClassName,
-              }}
-              disabled={disableAllButtons}
-            >
-              <span data-testid="start-sketch">Start Sketch</span>
-              <Tooltip
-                delay={1250}
-                position="bottom"
-                className="!px-2 !text-xs"
-              >
-                Shortcut: S
-              </Tooltip>
-            </ActionButton>
-          </li>
-        )}
-        {nextEvents.includes('Enter sketch') && pathId && (
-          <li className="contents">
-            <ActionButton
-              className={buttonClassName}
-              Element="button"
-              onClick={() => send({ type: 'Enter sketch' })}
-              iconStart={{
-                icon: 'sketch',
-                iconClassName,
-                bgClassName,
-              }}
-              disabled={disableAllButtons}
-            >
-              Edit Sketch
-              <Tooltip
-                delay={1250}
-                position="bottom"
-                className="!px-2 !text-xs"
-              >
-                Shortcut: S
-              </Tooltip>
-            </ActionButton>
-          </li>
-        )}
-        {nextEvents.includes('Cancel') && !state.matches('idle') && (
-          <li className="contents">
-            <ActionButton
-              className={buttonClassName}
-              Element="button"
-              onClick={() => send({ type: 'Cancel' })}
-              iconStart={{
-                icon: 'arrowLeft',
-                iconClassName,
-                bgClassName,
-              }}
-              disabled={disableAllButtons}
-            >
-              Exit Sketch
-              <Tooltip
-                delay={1250}
-                position="bottom"
-                className="!px-2 !text-xs"
-              >
-                Shortcut: Esc
-              </Tooltip>
-            </ActionButton>
-          </li>
-        )}
-        {state.matches('Sketch no face') && (
-          <li className="contents">
-            <div className="mx-2 text-sm">click plane or face to sketch on</div>
-          </li>
-        )}
-        {state.matches('Sketch') && !state.matches('idle') && (
-          <>
-            <li className="contents" key="line-button">
-              <ActionButton
-                className={buttonClassName}
+        {/* A menu item will either be a vertical line break, a button with a dropdown, or a single button */}
+        {currentModeItems.map((maybeIconConfig, i) => {
+          if (maybeIconConfig === 'break') {
+            return (
+              <div
+                key={'break-' + i}
+                className="h-5 w-[1px] block bg-chalkboard-30 dark:bg-chalkboard-80"
+              />
+            )
+          } else if (Array.isArray(maybeIconConfig)) {
+            return (
+              <ActionButtonDropdown
                 Element="button"
-                onClick={() =>
-                  state?.matches('Sketch.Line tool')
-                    ? send('CancelSketch')
-                    : send({
-                        type: 'change tool',
-                        data: { tool: 'line' },
-                      })
+                key={maybeIconConfig[0].id}
+                data-testid={maybeIconConfig[0].id + '-dropdown'}
+                id={maybeIconConfig[0].id + '-dropdown'}
+                name={maybeIconConfig[0].title}
+                className={
+                  'group/wrapper ' +
+                  buttonBorderClassName +
+                  ' !bg-transparent relative group !gap-0'
                 }
-                aria-pressed={state?.matches('Sketch.Line tool')}
-                iconStart={{
-                  icon: 'line',
-                  iconClassName,
-                  bgClassName,
-                }}
-                disabled={disableLineButton}
+                splitMenuItems={maybeIconConfig.map((itemConfig) => ({
+                  id: itemConfig.id,
+                  label: itemConfig.title,
+                  hotkey: itemConfig.hotkey,
+                  onClick: () => itemConfig.onClick(configCallbackProps),
+                  disabled:
+                    disableAllButtons ||
+                    itemConfig.status !== 'available' ||
+                    itemConfig.disabled === true,
+                  status: itemConfig.status,
+                }))}
               >
-                Line
-                <Tooltip
-                  delay={1250}
-                  position="bottom"
-                  className="!px-2 !text-xs"
+                <ActionButton
+                  Element="button"
+                  id={maybeIconConfig[0].id}
+                  data-testid={maybeIconConfig[0].id}
+                  iconStart={{
+                    icon: maybeIconConfig[0].icon,
+                    className: iconClassName,
+                    bgClassName: bgClassName,
+                  }}
+                  className={
+                    '!border-transparent !px-0 pressed:!text-chalkboard-10 pressed:enabled:hovered:!text-chalkboard-10 ' +
+                    buttonBgClassName
+                  }
+                  aria-pressed={maybeIconConfig[0].isActive}
+                  disabled={
+                    disableAllButtons ||
+                    maybeIconConfig[0].status !== 'available' ||
+                    maybeIconConfig[0].disabled
+                  }
+                  name={maybeIconConfig[0].title}
+                  aria-description={maybeIconConfig[0].description}
+                  onClick={() =>
+                    maybeIconConfig[0].onClick(configCallbackProps)
+                  }
                 >
-                  Shortcut: L
-                </Tooltip>
-              </ActionButton>
-            </li>
-            <li className="contents" key="tangential-arc-button">
+                  <span
+                    className={!maybeIconConfig[0].showTitle ? 'sr-only' : ''}
+                  >
+                    {maybeIconConfig[0].title}
+                  </span>
+                </ActionButton>
+                <ToolbarItemTooltip
+                  itemConfig={maybeIconConfig[0]}
+                  configCallbackProps={configCallbackProps}
+                />
+              </ActionButtonDropdown>
+            )
+          }
+          const itemConfig = maybeIconConfig
+
+          return (
+            <div className="relative" key={itemConfig.id}>
               <ActionButton
-                className={buttonClassName}
                 Element="button"
-                onClick={() =>
-                  state.matches('Sketch.Tangential arc to')
-                    ? send('CancelSketch')
-                    : send({
-                        type: 'change tool',
-                        data: { tool: 'tangentialArc' },
-                      })
-                }
-                aria-pressed={state.matches('Sketch.Tangential arc to')}
+                key={itemConfig.id}
+                id={itemConfig.id}
+                data-testid={itemConfig.id}
                 iconStart={{
-                  icon: 'arc',
-                  iconClassName,
-                  bgClassName,
+                  icon: itemConfig.icon,
+                  className: iconClassName,
+                  bgClassName: bgClassName,
                 }}
-                disabled={disableTangentialArc}
-              >
-                Tangential Arc
-                <Tooltip
-                  delay={1250}
-                  position="bottom"
-                  className="!px-2 !text-xs"
-                >
-                  Shortcut: A
-                </Tooltip>
-              </ActionButton>
-            </li>
-            <li className="contents" key="rectangle-button">
-              <ActionButton
-                className={buttonClassName}
-                Element="button"
-                onClick={() =>
-                  state.matches('Sketch.Rectangle tool')
-                    ? send('CancelSketch')
-                    : send({
-                        type: 'change tool',
-                        data: { tool: 'rectangle' },
-                      })
+                className={
+                  'pressed:!text-chalkboard-10 pressed:enabled:hovered:!text-chalkboard-10 ' +
+                  buttonBorderClassName +
+                  ' ' +
+                  buttonBgClassName +
+                  (!itemConfig.showTitle ? ' !px-0' : '')
                 }
-                aria-pressed={state.matches('Sketch.Rectangle tool')}
-                iconStart={{
-                  icon: 'rectangle',
-                  iconClassName,
-                  bgClassName,
-                }}
-                disabled={disableRectangle}
-                title={
-                  canRectangleTool(context)
-                    ? 'Rectangle'
-                    : 'Can only be used when a sketch is empty currently'
+                name={itemConfig.title}
+                aria-description={itemConfig.description}
+                aria-pressed={itemConfig.isActive}
+                disabled={
+                  disableAllButtons ||
+                  itemConfig.status !== 'available' ||
+                  itemConfig.disabled
                 }
+                onClick={() => itemConfig.onClick(configCallbackProps)}
               >
-                Rectangle
-                <Tooltip
-                  delay={1250}
-                  position="bottom"
-                  className="!px-2 !text-xs"
-                >
-                  Shortcut: R
-                </Tooltip>
+                <span className={!itemConfig.showTitle ? 'sr-only' : ''}>
+                  {itemConfig.title}
+                </span>
               </ActionButton>
-            </li>
-          </>
-        )}
-        {state.matches('Sketch.SketchIdle') &&
-          nextEvents.filter(
-            (eventName) =>
-              eventName.includes('Make segment') ||
-              eventName.includes('Constrain')
-          ).length > 0 && (
-            <ActionButtonDropdown
-              splitMenuItems={splitMenuItems}
-              className={buttonClassName}
-              Element="button"
-              iconStart={{
-                icon: 'dimension',
-                iconClassName,
-                bgClassName,
-              }}
-            >
-              Constraints
-            </ActionButtonDropdown>
-          )}
-        {state.matches('idle') && (
-          <li className="contents">
-            <ActionButton
-              className={buttonClassName}
-              Element="button"
-              onClick={() =>
-                commandBarSend({
-                  type: 'Find and select command',
-                  data: { name: 'Extrude', groupId: 'modeling' },
-                })
-              }
-              disabled={!state.can('Extrude') || disableAllButtons}
-              title={
-                state.can('Extrude')
-                  ? 'extrude'
-                  : 'sketches need to be closed, or not already extruded'
-              }
-              iconStart={{
-                icon: 'extrude',
-                iconClassName,
-                bgClassName,
-              }}
-            >
-              Extrude
-              <Tooltip
-                delay={1250}
-                position="bottom"
-                className="!px-2 !text-xs"
-              >
-                Shortcut: E
-              </Tooltip>
-            </ActionButton>
-          </li>
-        )}
-        {state.matches('idle') && (DEV || (window as any)._enableFillet) && (
-          <li className="contents">
-            <ActionButton
-              className={buttonClassName}
-              Element="button"
-              onClick={() =>
-                commandBarSend({
-                  type: 'Find and select command',
-                  data: { name: 'Fillet', groupId: 'modeling' },
-                })
-              }
-              disabled={disableFillet}
-              title={disableFillet ? 'fillet' : "edge can't be filleted"}
-              iconStart={{
-                icon: 'fillet', // todo: add fillet icon
-                iconClassName,
-                bgClassName,
-              }}
-            >
-              Fillet
-              <Tooltip
-                delay={1250}
-                position="bottom"
-                className="!px-2 !text-xs"
-              >
-                Shortcut: F
-              </Tooltip>
-            </ActionButton>
-          </li>
-        )}
+              <ToolbarItemTooltip
+                itemConfig={itemConfig}
+                configCallbackProps={configCallbackProps}
+              />
+            </div>
+          )
+        })}
       </ul>
+      {state.matches('Sketch no face') && (
+        <div className="absolute top-full left-1/2 -translate-x-1/2 mt-2 py-1 px-2 bg-chalkboard-10 dark:bg-chalkboard-90 border border-chalkboard-20 dark:border-chalkboard-80 rounded shadow-lg">
+          <p className="text-xs">Select a plane or face to start sketching</p>
+        </div>
+      )}
     </menu>
   )
 }
+
+/**
+ * The single button and dropdown button share content, so we extract it here
+ * It contains a tooltip with the title, description, and links
+ * and a hotkey listener
+ */
+const ToolbarItemTooltip = memo(function ToolbarItemContents({
+  itemConfig,
+  configCallbackProps,
+}: {
+  itemConfig: ToolbarItemResolved
+  configCallbackProps: ToolbarItemCallbackProps
+}) {
+  useHotkeys(
+    itemConfig.hotkey || '',
+    () => {
+      itemConfig.onClick(configCallbackProps)
+    },
+    {
+      enabled:
+        itemConfig.status === 'available' &&
+        !!itemConfig.hotkey &&
+        !itemConfig.disabled &&
+        !itemConfig.disableHotkey,
+    }
+  )
+
+  return (
+    <Tooltip
+      inert={false}
+      position="bottom"
+      wrapperClassName="!p-4 !pointer-events-auto"
+      contentClassName="!text-left text-wrap !text-xs !p-0 !pb-2 flex gap-2 !max-w-none !w-72 flex-col items-stretch"
+    >
+      <div className="rounded-top flex items-center gap-2 pt-3 pb-2 px-2 bg-chalkboard-20/50 dark:bg-chalkboard-80/50">
+        <span
+          className={`text-sm flex-1 ${
+            itemConfig.status !== 'available'
+              ? 'text-chalkboard-70 dark:text-chalkboard-40'
+              : ''
+          }`}
+        >
+          {itemConfig.title}
+        </span>
+        {itemConfig.status === 'available' && itemConfig.hotkey ? (
+          <kbd className="flex-none hotkey">{itemConfig.hotkey}</kbd>
+        ) : itemConfig.status === 'kcl-only' ? (
+          <>
+            <span className="text-wrap font-sans flex-0 text-chalkboard-70 dark:text-chalkboard-40">
+              KCL code only
+            </span>
+            <CustomIcon
+              name="code"
+              className="w-5 h-5 text-chalkboard-70 dark:text-chalkboard-40"
+            />
+          </>
+        ) : (
+          itemConfig.status === 'unavailable' && (
+            <>
+              <span className="text-wrap font-sans flex-0 text-chalkboard-70 dark:text-chalkboard-40">
+                In development
+              </span>
+              <CustomIcon
+                name="lockClosed"
+                className="w-5 h-5 text-chalkboard-70 dark:text-chalkboard-40"
+              />
+            </>
+          )
+        )}
+      </div>
+      <p className="px-2 text-ch font-sans">{itemConfig.description}</p>
+      {itemConfig.links.length > 0 && (
+        <>
+          <hr className="border-chalkboard-20 dark:border-chalkboard-80" />
+          <ul className="p-0 px-1 m-0 flex flex-col">
+            {itemConfig.links.map((link) => (
+              <li key={link.label} className="contents">
+                <a
+                  href={link.url}
+                  target="_blank"
+                  rel="noreferrer"
+                  className="flex items-center rounded-sm p-1 no-underline text-inherit hover:bg-primary/10 hover:text-primary dark:hover:bg-chalkboard-70 dark:hover:text-inherit"
+                >
+                  <span className="flex-1">Open {link.label}</span>
+                  <CustomIcon name="link" className="w-4 h-4" />
+                </a>
+              </li>
+            ))}
+          </ul>
+        </>
+      )}
+    </Tooltip>
+  )
+})

src/clientSideScene/CameraControls.ts

@@ -17,11 +17,11 @@ import {
   ZOOM_MAGIC_NUMBER,
 } from './sceneInfra'
 import {
-  EngineCommand,
   Subscription,
   EngineCommandManager,
   UnreliableSubscription,
 } from 'lang/std/engineConnection'
+import { EngineCommand } from 'lang/std/artifactMap'
 import { uuidv4 } from 'lib/utils'
 import { deg2Rad } from 'lib/utils2d'
 import { isReducedMotion, roundOff, throttle } from 'lib/utils'
@@ -585,10 +585,6 @@ export class CameraControls {
       .add(direction.multiplyScalar(-distanceAfter))
     this.camera.position.copy(newPosition)
 
-    const { z_near, z_far } = calculateNearFarFromFOV(this.lastPerspectiveFov)
-    this.camera.near = z_near
-    this.camera.far = z_far
-
     if (splitEngineCalls) {
       await this.engineCommandManager.sendSceneCommand({
         type: 'modeling_cmd_req',
@@ -1144,9 +1140,6 @@ function convertThreeCamValuesToEngineCam({
   up: Vector3
   vantage: Vector3
 } {
-  // Something to consider is that the orbit controls have a target,
-  // we're kind of deriving the target/lookAtVector here when it might not be needed
-  // leaving for now since it's working but maybe revisit later
   const euler = new Euler().setFromQuaternion(quaternion, 'XYZ')
 
   const upVector = new Vector3(0, 1, 0).applyEuler(euler).normalize()
@@ -1157,18 +1150,50 @@ function convertThreeCamValuesToEngineCam({
       vantage: position,
     }
   }
-  const lookAtVector = new Vector3(0, 0, -1)
-    .applyEuler(euler)
-    .normalize()
-    .add(position)
-  const fudgeFactor2 = zoom * 0.9979224466814468 - 0.03473692325839295
-  const zoomFactor = (-ZOOM_MAGIC_NUMBER + fudgeFactor2) / zoom
-  const direction = lookAtVector.clone().sub(position).normalize()
-  const newVantage = position.clone().add(direction.multiplyScalar(zoomFactor))
+
+  // re-implementing stuff here, though this is a bunch of Mike's code
+  // if we need to pull him in again, at least it will be familiar to him
+  // and it's all simple functions.
+  interface Coord3d {
+    x: number
+    y: number
+    z: number
+  }
+
+  function buildLookAt(distance: number, center: Coord3d, eye: Coord3d) {
+    const eyeVector = normalized(sub(eye, center))
+    return { center: center, eye: add(center, mult(eyeVector, distance)) }
+  }
+
+  function mult(vecA: Coord3d, sc: number): Coord3d {
+    return { x: vecA.x * sc, y: vecA.y * sc, z: vecA.z * sc }
+  }
+
+  function add(vecA: Coord3d, vecB: Coord3d): Coord3d {
+    return { x: vecA.x + vecB.x, y: vecA.y + vecB.y, z: vecA.z + vecB.z }
+  }
+
+  function sub(vecA: Coord3d, vecB: Coord3d): Coord3d {
+    return { x: vecA.x - vecB.x, y: vecA.y - vecB.y, z: vecA.z - vecB.z }
+  }
+
+  function dot(vecA: Coord3d, vecB: Coord3d) {
+    return vecA.x * vecB.x + vecA.y * vecB.y + vecA.z * vecB.z
+  }
+
+  function length(vecA: Coord3d) {
+    return Math.sqrt(dot(vecA, vecA))
+  }
+
+  function normalized(vecA: Coord3d) {
+    return mult(vecA, 1.0 / length(vecA))
+  }
+
+  const lookAt = buildLookAt(64 / zoom, target, position)
   return {
-    center: lookAtVector,
-    up: upVector,
-    vantage: newVantage,
+    center: new Vector3(lookAt.center.x, lookAt.center.y, lookAt.center.z),
+    up: new Vector3(0, 0, 1),
+    vantage: new Vector3(lookAt.eye.x, lookAt.eye.y, lookAt.eye.z),
   }
 }
 
@@ -1224,7 +1249,7 @@ export async function letEngineAnimateAndSyncCamAfter(
       type: 'enable_sketch_mode',
       adjust_camera: true,
       animated: !isReducedMotion(),
-      ortho: false,
+      ortho: true,
       entity_id: entityId,
     },
   })
@@ -1241,25 +1266,4 @@ export async function letEngineAnimateAndSyncCamAfter(
       type: 'default_camera_get_settings',
     },
   })
-  await engineCommandManager.sendSceneCommand({
-    type: 'modeling_cmd_req',
-    cmd_id: uuidv4(),
-    cmd: {
-      type: 'enable_sketch_mode',
-      adjust_camera: true,
-      animated: false,
-      ortho: true,
-      entity_id: entityId,
-    },
-  })
-  await new Promise((resolve) => setTimeout(resolve, 50))
-  await engineCommandManager.sendSceneCommand({
-    // CameraControls subscribes to default_camera_get_settings response events
-    // firing this at connection ensure the camera's are synced initially
-    type: 'modeling_cmd_req',
-    cmd_id: uuidv4(),
-    cmd: {
-      type: 'default_camera_get_settings',
-    },
-  })
 }

src/clientSideScene/ClientSideSceneComp.tsx

@@ -102,6 +102,7 @@ export const ClientSideScene = ({
     canvas.addEventListener('mousedown', sceneInfra.onMouseDown, false)
     canvas.addEventListener('mouseup', sceneInfra.onMouseUp, false)
     sceneInfra.setSend(send)
+    engineCommandManager.modelingSend = send
     return () => {
       canvas?.removeEventListener('mousemove', sceneInfra.onMouseMove)
       canvas?.removeEventListener('mousedown', sceneInfra.onMouseDown)

src/clientSideScene/sceneEntities.ts

@@ -22,11 +22,9 @@ import {
 import {
   ARROWHEAD,
   AXIS_GROUP,
-  DEFAULT_PLANES,
-  DefaultPlane,
-  defaultPlaneColor,
   getSceneScale,
   INTERSECTION_PLANE_LAYER,
+  OnClickCallbackArgs,
   OnMouseEnterLeaveArgs,
   RAYCASTABLE_PLANE,
   SEGMENT_LENGTH_LABEL,
@@ -47,7 +45,6 @@ import {
   PipeExpression,
   Program,
   ProgramMemory,
-  programMemoryInit,
   recast,
   SketchGroup,
   ExtrudeGroup,
@@ -79,6 +76,7 @@ import {
 } from 'lang/std/sketch'
 import { isOverlap, normaliseAngle, roundOff, throttle } from 'lib/utils'
 import {
+  addStartProfileAt,
   createArrayExpression,
   createCallExpressionStdLib,
   createLiteral,
@@ -96,10 +94,7 @@ import { createGridHelper, orthoScale, perspScale } from './helpers'
 import { Models } from '@kittycad/lib'
 import { uuidv4 } from 'lib/utils'
 import { SegmentOverlayPayload, SketchDetails } from 'machines/modelingMachine'
-import {
-  ArtifactMapCommand,
-  EngineCommandManager,
-} from 'lang/std/engineConnection'
+import { EngineCommandManager } from 'lang/std/engineConnection'
 import {
   getRectangleCallExpressions,
   updateRectangleSketch,
@@ -130,7 +125,7 @@ export const HIDE_HOVER_SEGMENT_LENGTH = 60 // in pixels
 export class SceneEntities {
   engineCommandManager: EngineCommandManager
   scene: Scene
-  sceneProgramMemory: ProgramMemory = { root: {}, return: null }
+  sceneProgramMemory: ProgramMemory = ProgramMemory.empty()
   activeSegments: { [key: string]: Group } = {}
   intersectionPlane: Mesh | null = null
   axisGroup: Group | null = null
@@ -204,6 +199,7 @@ export class SceneEntities {
 
   createIntersectionPlane() {
     if (sceneInfra.scene.getObjectByName(RAYCASTABLE_PLANE)) {
+      // this.removeIntersectionPlane()
       console.warn('createIntersectionPlane called when it already exists')
       return
     }
@@ -300,6 +296,51 @@ export class SceneEntities {
     if (intersectionPlane) this.scene.remove(intersectionPlane)
   }
 
+  setupNoPointsListener({
+    sketchDetails,
+    afterClick,
+  }: {
+    sketchDetails: SketchDetails
+    afterClick: (args: OnClickCallbackArgs) => void
+  }) {
+    // Create a THREEjs plane to raycast clicks onto
+    this.createIntersectionPlane()
+    const quaternion = quaternionFromUpNForward(
+      new Vector3(...sketchDetails.yAxis),
+      new Vector3(...sketchDetails.zAxis)
+    )
+
+    // Position the click raycast plane
+    if (this.intersectionPlane) {
+      this.intersectionPlane.setRotationFromQuaternion(quaternion)
+      this.intersectionPlane.position.copy(
+        new Vector3(...(sketchDetails?.origin || [0, 0, 0]))
+      )
+    }
+    sceneInfra.setCallbacks({
+      onClick: async (args) => {
+        if (!args) return
+        if (args.mouseEvent.which !== 1) return
+        const { intersectionPoint } = args
+        if (!intersectionPoint?.twoD || !sketchDetails?.sketchPathToNode) return
+        const addStartProfileAtRes = addStartProfileAt(
+          kclManager.ast,
+          sketchDetails.sketchPathToNode,
+          [intersectionPoint.twoD.x, intersectionPoint.twoD.y]
+        )
+
+        if (trap(addStartProfileAtRes)) return
+        const { modifiedAst } = addStartProfileAtRes
+
+        await kclManager.updateAst(modifiedAst, false)
+        this.removeIntersectionPlane()
+
+        // Now perform the caller-specified action
+        afterClick(args)
+      },
+    })
+  }
+
   async setupSketch({
     sketchPathToNode,
     forward,
@@ -539,7 +580,7 @@ export class SceneEntities {
     segmentName: 'line' | 'tangentialArcTo' = 'line',
     shouldTearDown = true
   ) => {
-    const _ast = JSON.parse(JSON.stringify(kclManager.ast))
+    const _ast = structuredClone(kclManager.ast)
 
     const _node1 = getNodeFromPath<VariableDeclaration>(
       _ast,
@@ -550,9 +591,9 @@ export class SceneEntities {
     const variableDeclarationName =
       _node1.node?.declarations?.[0]?.id?.name || ''
 
-    const sg = kclManager.programMemory.root[
+    const sg = kclManager.programMemory.get(
       variableDeclarationName
-    ] as SketchGroup
+    ) as SketchGroup
     const lastSeg = sg.value.slice(-1)[0] || sg.start
 
     const index = sg.value.length // because we've added a new segment that's not in the memory yet, no need for `-1`
@@ -676,21 +717,6 @@ export class SceneEntities {
       ...this.mouseEnterLeaveCallbacks(),
     })
   }
-  setupRectangleOriginListener = () => {
-    sceneInfra.setCallbacks({
-      onClick: (args) => {
-        const twoD = args.intersectionPoint?.twoD
-        if (!twoD) {
-          console.warn(`This click didn't have a 2D intersection`, args)
-          return
-        }
-        sceneInfra.modelingSend({
-          type: 'Add rectangle origin',
-          data: [twoD.x, twoD.y],
-        })
-      },
-    })
-  }
   setupDraftRectangle = async (
     sketchPathToNode: PathToNode,
     forward: [number, number, number],
@@ -698,7 +724,7 @@ export class SceneEntities {
     sketchOrigin: [number, number, number],
     rectangleOrigin: [x: number, y: number]
   ) => {
-    let _ast = JSON.parse(JSON.stringify(kclManager.ast))
+    let _ast = structuredClone(kclManager.ast)
 
     const _node1 = getNodeFromPath<VariableDeclaration>(
       _ast,
@@ -708,6 +734,8 @@ export class SceneEntities {
     if (trap(_node1)) return Promise.reject(_node1)
     const variableDeclarationName =
       _node1.node?.declarations?.[0]?.id?.name || ''
+    const startSketchOn = _node1.node?.declarations
+    const startSketchOnInit = startSketchOn?.[0]?.init
 
     const tags: [string, string, string] = [
       findUniqueName(_ast, 'rectangleSegmentA'),
@@ -715,21 +743,14 @@ export class SceneEntities {
       findUniqueName(_ast, 'rectangleSegmentC'),
     ]
 
-    const _node2 = getNodeFromPath<VariableDeclaration>(
-      _ast,
-      sketchPathToNode || [],
-      'VariableDeclaration'
-    )
-    if (trap(_node2)) return Promise.reject(_node2)
-    const startSketchOn = _node2.node?.declarations
-
-    const startSketchOnInit = startSketchOn?.[0]?.init
     startSketchOn[0].init = createPipeExpression([
       startSketchOnInit,
       ...getRectangleCallExpressions(rectangleOrigin, tags),
     ])
 
-    _ast = parse(recast(_ast))
+    let _recastAst = parse(recast(_ast))
+    if (trap(_recastAst)) return Promise.reject(_recastAst)
+    _ast = _recastAst
 
     const { programMemoryOverride, truncatedAst } = await this.setupSketch({
       sketchPathToNode,
@@ -743,7 +764,7 @@ export class SceneEntities {
     sceneInfra.setCallbacks({
       onMove: async (args) => {
         // Update the width and height of the draft rectangle
-        const pathToNodeTwo = JSON.parse(JSON.stringify(sketchPathToNode))
+        const pathToNodeTwo = structuredClone(sketchPathToNode)
         pathToNodeTwo[1][0] = 0
 
         const _node = getNodeFromPath<VariableDeclaration>(
@@ -768,9 +789,9 @@ export class SceneEntities {
           programMemoryOverride,
         })
         this.sceneProgramMemory = programMemory
-        const sketchGroup = programMemory.root[
+        const sketchGroup = programMemory.get(
           variableDeclarationName
-        ] as SketchGroup
+        ) as SketchGroup
         const sgPaths = sketchGroup.value
         const orthoFactor = orthoScale(sceneInfra.camControls.camera)
 
@@ -805,7 +826,9 @@ export class SceneEntities {
         if (sketchInit.type === 'PipeExpression') {
           updateRectangleSketch(sketchInit, x, y, tags[0])
 
-          _ast = parse(recast(_ast))
+          let _recastAst = parse(recast(_ast))
+          if (trap(_recastAst)) return Promise.reject(_recastAst)
+          _ast = _recastAst
 
           // Update the primary AST and unequip the rectangle tool
           await kclManager.executeAstMock(_ast)
@@ -820,9 +843,9 @@ export class SceneEntities {
 
           // Prepare to update the THREEjs scene
           this.sceneProgramMemory = programMemory
-          const sketchGroup = programMemory.root[
+          const sketchGroup = programMemory.get(
             variableDeclarationName
-          ] as SketchGroup
+          ) as SketchGroup
           const sgPaths = sketchGroup.value
           const orthoFactor = orthoScale(sceneInfra.camControls.camera)
 
@@ -1009,10 +1032,14 @@ export class SceneEntities {
       PROFILE_START,
     ])
     if (!group) return
-    const pathToNode: PathToNode = JSON.parse(
-      JSON.stringify(group.userData.pathToNode)
-    )
-    const varDecIndex = JSON.parse(JSON.stringify(pathToNode[1][0]))
+    const pathToNode: PathToNode = structuredClone(group.userData.pathToNode)
+    const varDecIndex = pathToNode[1][0]
+    if (typeof varDecIndex !== 'number') {
+      console.error(
+        `Expected varDecIndex to be a number, but found: ${typeof varDecIndex} ${varDecIndex}`
+      )
+      return
+    }
     if (draftInfo) {
       pathToNode[1][0] = 0
     }
@@ -1081,9 +1108,9 @@ export class SceneEntities {
       })
       this.sceneProgramMemory = programMemory
 
-      const maybeSketchGroup = programMemory.root[variableDeclarationName]
+      const maybeSketchGroup = programMemory.get(variableDeclarationName)
       let sketchGroup = undefined
-      if (maybeSketchGroup.type === 'SketchGroup') {
+      if (maybeSketchGroup?.type === 'SketchGroup') {
         sketchGroup = maybeSketchGroup
       } else if ((maybeSketchGroup as ExtrudeGroup).sketchGroup) {
         sketchGroup = (maybeSketchGroup as ExtrudeGroup).sketchGroup
@@ -1473,150 +1500,6 @@ export class SceneEntities {
       this._tearDownSketch(0, resolve, reject, { removeAxis })
     })
   }
-  setupDefaultPlaneHover() {
-    sceneInfra.setCallbacks({
-      onMouseEnter: ({ selected }) => {
-        if (!(selected instanceof Mesh && selected.parent)) return
-        if (selected.parent.userData.type !== DEFAULT_PLANES) return
-        const type: DefaultPlane = selected.userData.type
-        selected.material.color = defaultPlaneColor(type, 0.5, 1)
-      },
-      onMouseLeave: ({ selected }) => {
-        if (!(selected instanceof Mesh && selected.parent)) return
-        if (selected.parent.userData.type !== DEFAULT_PLANES) return
-        const type: DefaultPlane = selected.userData.type
-        selected.material.color = defaultPlaneColor(type)
-      },
-      onClick: async (args) => {
-        const { entity_id } = await sendSelectEventToEngine(
-          args?.mouseEvent,
-          document.getElementById('video-stream') as HTMLVideoElement,
-          sceneInfra._streamDimensions
-        )
-
-        let _entity_id = entity_id
-        if (!_entity_id) return
-        if (
-          engineCommandManager.defaultPlanes?.xy === _entity_id ||
-          engineCommandManager.defaultPlanes?.xz === _entity_id ||
-          engineCommandManager.defaultPlanes?.yz === _entity_id ||
-          engineCommandManager.defaultPlanes?.negXy === _entity_id ||
-          engineCommandManager.defaultPlanes?.negXz === _entity_id ||
-          engineCommandManager.defaultPlanes?.negYz === _entity_id
-        ) {
-          const defaultPlaneStrMap: Record<string, DefaultPlaneStr> = {
-            [engineCommandManager.defaultPlanes.xy]: 'XY',
-            [engineCommandManager.defaultPlanes.xz]: 'XZ',
-            [engineCommandManager.defaultPlanes.yz]: 'YZ',
-            [engineCommandManager.defaultPlanes.negXy]: '-XY',
-            [engineCommandManager.defaultPlanes.negXz]: '-XZ',
-            [engineCommandManager.defaultPlanes.negYz]: '-YZ',
-          }
-          // TODO can we get this information from rust land when it creates the default planes?
-          // maybe returned from make_default_planes (src/wasm-lib/src/wasm.rs)
-          let zAxis: [number, number, number] = [0, 0, 1]
-          let yAxis: [number, number, number] = [0, 1, 0]
-
-          // get unit vector from camera position to target
-          const camVector = sceneInfra.camControls.camera.position
-            .clone()
-            .sub(sceneInfra.camControls.target)
-
-          if (engineCommandManager.defaultPlanes?.xy === _entity_id) {
-            zAxis = [0, 0, 1]
-            yAxis = [0, 1, 0]
-            if (camVector.z < 0) {
-              zAxis = [0, 0, -1]
-              _entity_id = engineCommandManager.defaultPlanes?.negXy || ''
-            }
-          } else if (engineCommandManager.defaultPlanes?.yz === _entity_id) {
-            zAxis = [1, 0, 0]
-            yAxis = [0, 0, 1]
-            if (camVector.x < 0) {
-              zAxis = [-1, 0, 0]
-              _entity_id = engineCommandManager.defaultPlanes?.negYz || ''
-            }
-          } else if (engineCommandManager.defaultPlanes?.xz === _entity_id) {
-            zAxis = [0, 1, 0]
-            yAxis = [0, 0, 1]
-            _entity_id = engineCommandManager.defaultPlanes?.negXz || ''
-            if (camVector.y < 0) {
-              zAxis = [0, -1, 0]
-              _entity_id = engineCommandManager.defaultPlanes?.xz || ''
-            }
-          }
-
-          sceneInfra.modelingSend({
-            type: 'Select default plane',
-            data: {
-              type: 'defaultPlane',
-              planeId: _entity_id,
-              plane: defaultPlaneStrMap[_entity_id],
-              zAxis,
-              yAxis,
-            },
-          })
-          return
-        }
-        const artifact = this.engineCommandManager.artifactMap[_entity_id]
-        // If we clicked on an extrude wall, we climb up the parent Id
-        // to get the sketch profile's face ID. If we clicked on an endcap,
-        // we already have it.
-        const targetId =
-          'additionalData' in artifact &&
-          artifact.additionalData?.type === 'cap'
-            ? _entity_id
-            : artifact.parentId
-
-        // tsc cannot infer that target can have extrusions
-        // from the commandType (why?) so we need to cast it
-        const target = this.engineCommandManager.artifactMap?.[
-          targetId || ''
-        ] as ArtifactMapCommand & { extrusions?: string[] }
-
-        // TODO: We get the first extrusion command ID,
-        // which is fine while backend systems only support one extrusion.
-        // but we need to more robustly handle resolving to the correct extrusion
-        // if there are multiple.
-        const extrusions =
-          this.engineCommandManager.artifactMap?.[target?.extrusions?.[0] || '']
-
-        if (artifact?.commandType !== 'solid3d_get_extrusion_face_info') return
-
-        const faceInfo = await getFaceDetails(_entity_id)
-        if (!faceInfo?.origin || !faceInfo?.z_axis || !faceInfo?.y_axis) return
-        const { z_axis, y_axis, origin } = faceInfo
-        const sketchPathToNode = getNodePathFromSourceRange(
-          kclManager.ast,
-          artifact.range
-        )
-
-        const extrudePathToNode = extrusions?.range
-          ? getNodePathFromSourceRange(kclManager.ast, extrusions.range)
-          : []
-
-        sceneInfra.modelingSend({
-          type: 'Select default plane',
-          data: {
-            type: 'extrudeFace',
-            zAxis: [z_axis.x, z_axis.y, z_axis.z],
-            yAxis: [y_axis.x, y_axis.y, y_axis.z],
-            position: [origin.x, origin.y, origin.z].map(
-              (num) => num / sceneInfra._baseUnitMultiplier
-            ) as [number, number, number],
-            sketchPathToNode,
-            extrudePathToNode,
-            cap:
-              artifact?.additionalData?.type === 'cap'
-                ? artifact.additionalData.info
-                : 'none',
-            faceId: _entity_id,
-          },
-        })
-        return
-      },
-    })
-  }
   mouseEnterLeaveCallbacks() {
     return {
       onMouseEnter: ({ selected, dragSelected }: OnMouseEnterLeaveArgs) => {
@@ -1763,7 +1646,7 @@ function prepareTruncatedMemoryAndAst(
     }
   | Error {
   const bodyIndex = Number(sketchPathToNode?.[1]?.[0]) || 0
-  const _ast = JSON.parse(JSON.stringify(ast))
+  const _ast = structuredClone(ast)
 
   const _node = getNodeFromPath<VariableDeclaration>(
     _ast,
@@ -1773,7 +1656,7 @@ function prepareTruncatedMemoryAndAst(
   if (err(_node)) return _node
   const variableDeclarationName = _node.node?.declarations?.[0]?.id?.name || ''
   const lastSeg = (
-    programMemory.root[variableDeclarationName] as SketchGroup
+    programMemory.get(variableDeclarationName) as SketchGroup
   ).value.slice(-1)[0]
   if (draftSegment) {
     // truncatedAst needs to setup with another segment at the end
@@ -1822,35 +1705,29 @@ function prepareTruncatedMemoryAndAst(
   }
   const truncatedAst: Program = {
     ..._ast,
-    body: [JSON.parse(JSON.stringify(_ast.body[bodyIndex]))],
+    body: [structuredClone(_ast.body[bodyIndex])],
   }
-  const programMemoryOverride = programMemoryInit()
-  if (err(programMemoryOverride)) return programMemoryOverride
 
   // Grab all the TagDeclarators and TagIdentifiers from memory.
   let start = _node.node.start
-  for (const key in programMemory.root) {
-    const value = programMemory.root[key]
-    if (!('__meta' in value)) {
-      continue
-    }
+  const programMemoryOverride = programMemory.filterVariables(true, (value) => {
     if (
+      !('__meta' in value) ||
       value.__meta === undefined ||
       value.__meta.length === 0 ||
       value.__meta[0].sourceRange === undefined
     ) {
-      continue
+      return false
     }
 
     if (value.__meta[0].sourceRange[0] >= start) {
       // We only want things before our start point.
-      continue
+      return false
     }
 
-    if (value.type === 'TagIdentifier') {
-      programMemoryOverride.root[key] = JSON.parse(JSON.stringify(value))
-    }
-  }
+    return value.type === 'TagIdentifier'
+  })
+  if (err(programMemoryOverride)) return programMemoryOverride
 
   for (let i = 0; i < bodyIndex; i++) {
     const node = _ast.body[i]
@@ -1858,12 +1735,12 @@ function prepareTruncatedMemoryAndAst(
       continue
     }
     const name = node.declarations[0].id.name
-    // const memoryItem = kclManager.programMemory.root[name]
-    const memoryItem = programMemory.root[name]
+    const memoryItem = programMemory.get(name)
     if (!memoryItem) {
       continue
     }
-    programMemoryOverride.root[name] = JSON.parse(JSON.stringify(memoryItem))
+    const error = programMemoryOverride.set(name, structuredClone(memoryItem))
+    if (err(error)) return error
   }
   return {
     truncatedAst,
@@ -1900,7 +1777,7 @@ export function sketchGroupFromPathToNode({
   )
   if (err(_varDec)) return _varDec
   const varDec = _varDec.node
-  const result = programMemory.root[varDec?.id?.name || '']
+  const result = programMemory.get(varDec?.id?.name || '')
   if (result?.type === 'ExtrudeGroup') {
     return result.sketchGroup
   }
@@ -2026,13 +1903,17 @@ export async function getFaceDetails(
       entity_id: entityId,
     },
   })
-  const faceInfo: Models['GetSketchModePlane_type'] = (
-    await engineCommandManager.sendSceneCommand({
-      type: 'modeling_cmd_req',
-      cmd_id: uuidv4(),
-      cmd: { type: 'get_sketch_mode_plane' },
-    })
-  )?.data?.data
+  const resp = await engineCommandManager.sendSceneCommand({
+    type: 'modeling_cmd_req',
+    cmd_id: uuidv4(),
+    cmd: { type: 'get_sketch_mode_plane' },
+  })
+  const faceInfo =
+    resp?.success &&
+    resp?.resp.type === 'modeling' &&
+    resp?.resp?.data?.modeling_response?.type === 'get_sketch_mode_plane'
+      ? resp?.resp?.data?.modeling_response.data
+      : ({} as Models['GetSketchModePlane_type'])
   await engineCommandManager.sendSceneCommand({
     type: 'modeling_cmd_req',
     cmd_id: uuidv4(),

src/clientSideScene/sceneInfra.ts

@@ -11,10 +11,8 @@ import {
   Raycaster,
   Vector2,
   Group,
-  PlaneGeometry,
   MeshBasicMaterial,
   Mesh,
-  DoubleSide,
   Intersection,
   Object3D,
   Object3DEventMap,
@@ -48,7 +46,6 @@ export const DEBUG_SHOW_INTERSECTION_PLANE: false = false
 export const DEBUG_SHOW_BOTH_SCENES: false = false
 
 export const RAYCASTABLE_PLANE = 'raycastable-plane'
-export const DEFAULT_PLANES = 'default-planes'
 
 export const X_AXIS = 'xAxis'
 export const Y_AXIS = 'yAxis'
@@ -72,7 +69,7 @@ interface OnDragCallbackArgs extends OnMouseEnterLeaveArgs {
   }
   intersects: Intersection<Object3D<Object3DEventMap>>[]
 }
-interface OnClickCallbackArgs {
+export interface OnClickCallbackArgs {
   mouseEvent: MouseEvent
   intersectionPoint?: {
     twoD: Vector2
@@ -325,16 +322,9 @@ export class SceneInfra {
       this.camControls.camera,
       this.camControls.target
     )
-    const planesGroup = this.scene.getObjectByName(DEFAULT_PLANES)
     const axisGroup = this.scene
       .getObjectByName(AXIS_GROUP)
       ?.getObjectByName('gridHelper')
-    planesGroup &&
-      planesGroup.scale.set(
-        scale / this._baseUnitMultiplier,
-        scale / this._baseUnitMultiplier,
-        scale / this._baseUnitMultiplier
-      )
     axisGroup?.name === 'gridHelper' && axisGroup.scale.set(scale, scale, scale)
   }
 
@@ -632,59 +622,6 @@ export class SceneInfra {
       this.onClickCallback({ mouseEvent, intersects })
     }
   }
-  showDefaultPlanes() {
-    const addPlane = (
-      rotation: { x: number; y: number; z: number }, //
-      type: DefaultPlane
-    ): Mesh => {
-      const planeGeometry = new PlaneGeometry(100, 100)
-      const planeMaterial = new MeshBasicMaterial({
-        color: defaultPlaneColor(type),
-        transparent: true,
-        opacity: 0.0,
-        side: DoubleSide,
-        depthTest: false, // needed to avoid transparency issues
-      })
-      const plane = new Mesh(planeGeometry, planeMaterial)
-      plane.rotation.x = rotation.x
-      plane.rotation.y = rotation.y
-      plane.rotation.z = rotation.z
-      plane.userData.type = type
-      plane.name = type
-      return plane
-    }
-    const planes = [
-      addPlane({ x: 0, y: Math.PI / 2, z: 0 }, YZ_PLANE),
-      addPlane({ x: 0, y: 0, z: 0 }, XY_PLANE),
-      addPlane({ x: -Math.PI / 2, y: 0, z: 0 }, XZ_PLANE),
-    ]
-    const planesGroup = new Group()
-    planesGroup.userData.type = DEFAULT_PLANES
-    planesGroup.name = DEFAULT_PLANES
-    planesGroup.add(...planes)
-    planesGroup.traverse((child) => {
-      if (child instanceof Mesh) {
-        child.layers.enable(SKETCH_LAYER)
-      }
-    })
-    planesGroup.layers.enable(SKETCH_LAYER)
-    const sceneScale = getSceneScale(
-      this.camControls.camera,
-      this.camControls.target
-    )
-    planesGroup.scale.set(
-      sceneScale / this._baseUnitMultiplier,
-      sceneScale / this._baseUnitMultiplier,
-      sceneScale / this._baseUnitMultiplier
-    )
-    this.scene.add(planesGroup)
-  }
-  removeDefaultPlanes() {
-    const planesGroup = this.scene.children.find(
-      ({ userData }) => userData.type === DEFAULT_PLANES
-    )
-    if (planesGroup) this.scene.remove(planesGroup)
-  }
   updateOtherSelectionColors = (otherSelections: Axis[]) => {
     const axisGroup = this.scene.children.find(
       ({ userData }) => userData?.type === AXIS_GROUP
@@ -742,28 +679,3 @@ function baseUnitTomm(baseUnit: BaseUnit) {
       return 914.4
   }
 }
-
-export type DefaultPlane =
-  | 'xy-default-plane'
-  | 'xz-default-plane'
-  | 'yz-default-plane'
-
-export const XY_PLANE: DefaultPlane = 'xy-default-plane'
-export const XZ_PLANE: DefaultPlane = 'xz-default-plane'
-export const YZ_PLANE: DefaultPlane = 'yz-default-plane'
-
-export function defaultPlaneColor(
-  plane: DefaultPlane,
-  lowCh = 0.1,
-  highCh = 0.7
-): Color {
-  switch (plane) {
-    case XY_PLANE:
-      return new Color(highCh, lowCh, lowCh)
-    case XZ_PLANE:
-      return new Color(lowCh, lowCh, highCh)
-    case YZ_PLANE:
-      return new Color(lowCh, highCh, lowCh)
-  }
-  return new Color(lowCh, lowCh, lowCh)
-}

src/components/ActionButtonDropdown.tsx

@@ -1,56 +1,93 @@
 import { Popover } from '@headlessui/react'
-import { ActionButton, ActionButtonProps } from './ActionButton'
+import { ActionButtonProps } from './ActionButton'
+import { CustomIcon } from './CustomIcon'
 
-type ActionButtonSplitProps = Omit<ActionButtonProps, 'iconEnd'> & {
+type ActionButtonSplitProps = ActionButtonProps & { Element: 'button' } & {
+  name?: string
   splitMenuItems: {
+    id: string
     label: string
     shortcut?: string
     onClick: () => void
     disabled?: boolean
+    status?: 'available' | 'unavailable' | 'kcl-only'
   }[]
 }
 
 export function ActionButtonDropdown({
   splitMenuItems,
   className,
+  children,
   ...props
 }: ActionButtonSplitProps) {
+  const baseClassNames = `action-button p-0 m-0 group mono text-xs leading-none flex items-center gap-2 rounded-sm border-solid border border-chalkboard-30 hover:border-chalkboard-40 enabled:dark:border-chalkboard-70 dark:hover:border-chalkboard-60 dark:bg-chalkboard-90/50 text-chalkboard-100 dark:text-chalkboard-10`
   return (
-    <Popover className="relative">
-      <Popover.Button
-        as={ActionButton}
-        className={className}
-        {...props}
-        Element="button"
-        iconEnd={{
-          icon: 'caretDown',
-          className: 'ui-open:rotate-180',
-          bgClassName:
-            'bg-chalkboard-20 dark:bg-chalkboard-80 ui-open:bg-primary ui-open:text-chalkboard-10',
-        }}
-      />
-      <Popover.Panel
-        as="ul"
-        className="absolute z-20 left-1/2 -translate-x-1/2 top-full mt-1 w-fit max-h-[80vh] overflow-y-auto py-2 flex flex-col gap-1 align-stretch text-inherit dark:text-chalkboard-10 bg-chalkboard-10 dark:bg-chalkboard-100 rounded shadow-lg border border-solid border-chalkboard-30 dark:border-chalkboard-80 text-sm m-0 p-0"
-      >
-        {splitMenuItems.map((item) => (
-          <li className="contents" key={item.label}>
-            <button
-              onClick={item.onClick}
-              className="block px-3 py-1 hover:bg-primary/10 dark:hover:bg-chalkboard-80 border-0 m-0 text-sm w-full rounded-none text-left disabled:!bg-transparent dark:disabled:text-chalkboard-60"
-              disabled={item.disabled}
-              data-testid={item.label}
-            >
-              <span className="capitalize">{item.label}</span>
-              {item.shortcut && (
-                <kbd className="bg-primary/10 dark:bg-chalkboard-80 dark:group-hover:bg-primary font-mono rounded-sm dark:text-inherit inline-block px-1 border-primary dark:border-chalkboard-90">
-                  {item.shortcut}
-                </kbd>
-              )}
-            </button>
-          </li>
-        ))}
-      </Popover.Panel>
+    <Popover className={`${baseClassNames} ${className}`}>
+      {({ close }) => (
+        <>
+          {children}
+          <Popover.Button className="border-transparent dark:border-transparent p-0 m-0 rounded-none !outline-none ui-open:border-primary ui-open:bg-primary">
+            <CustomIcon
+              name="caretDown"
+              className={
+                'w-3.5 h-5 text-chalkboard-70 dark:text-chalkboard-40 rounded-none ' +
+                'ui-open:rotate-180 ui-open:!text-chalkboard-10'
+              }
+            />
+            <span className="sr-only">
+              {props.name ? props.name + ': ' : ''}open menu
+            </span>
+          </Popover.Button>
+          <Popover.Panel
+            as="ul"
+            className="!pointer-events-auto absolute z-20 left-1/2 -translate-x-1/2 top-full mt-4 w-fit max-w-[280px] max-h-[80vh] overflow-y-auto py-2 flex flex-col align-stretch text-inherit dark:text-chalkboard-10 bg-chalkboard-10 dark:bg-chalkboard-100 rounded shadow-lg border border-solid border-chalkboard-30 dark:border-chalkboard-80 text-sm m-0 p-0"
+          >
+            {splitMenuItems.map((item) => (
+              <li className="contents" key={item.label}>
+                <button
+                  onClick={() => {
+                    item.onClick()
+                    // Close the popover
+                    close()
+                  }}
+                  className="group/button flex items-center gap-6 px-3 py-1 font-sans text-xs hover:bg-primary/10 dark:hover:bg-chalkboard-80 border-0 m-0 w-full rounded-none text-left disabled:!bg-transparent dark:disabled:text-chalkboard-60"
+                  disabled={item.disabled}
+                  data-testid={'dropdown-' + item.id}
+                >
+                  <span className="capitalize flex-grow text-left">
+                    {item.label}
+                  </span>
+                  {item.status === 'unavailable' ? (
+                    <div className="flex flex-none items-center gap-1">
+                      <span className="text-chalkboard-70 dark:text-chalkboard-40">
+                        In development
+                      </span>
+                      <CustomIcon
+                        name="lockClosed"
+                        className="w-4 h-4 text-chalkboard-70 dark:text-chalkboard-40"
+                      />
+                    </div>
+                  ) : item.status === 'kcl-only' ? (
+                    <div className="flex flex-none items-center gap-1">
+                      <span className="text-chalkboard-70 dark:text-chalkboard-40">
+                        KCL code only
+                      </span>
+                      <CustomIcon
+                        name="code"
+                        className="w-4 h-4 text-chalkboard-70 dark:text-chalkboard-40"
+                      />
+                    </div>
+                  ) : item.shortcut ? (
+                    <kbd className="hotkey flex-none group-disabled/button:text-chalkboard-50 dark:group-disabled/button:text-chalkboard-70 group-disabled/button:border-chalkboard-20 dark:group-disabled/button:border-chalkboard-80">
+                      {item.shortcut}
+                    </kbd>
+                  ) : null}
+                </button>
+              </li>
+            ))}
+          </Popover.Panel>
+        </>
+      )}
     </Popover>
   )
 }

src/components/AppHeader.tsx

@@ -30,7 +30,7 @@ export const AppHeader = ({
       className={
         'w-full grid ' +
         styles.header +
-        ' overlaid-panes sticky top-0 z-20 px-2 items-center ' +
+        ' overlaid-panes sticky top-0 z-20 px-2 items-start ' +
         className
       }
     >
@@ -49,9 +49,9 @@ export const AppHeader = ({
           <>
             <CommandBarOpenButton />
             <RefreshButton />
-            <UserSidebarMenu user={user} />
           </>
         )}
+        <UserSidebarMenu user={user} />
       </div>
     </header>
   )

src/components/AvailableVarsHelpers.tsx

@@ -1,5 +1,5 @@
 import { useEffect, useState, useRef } from 'react'
-import { parse, BinaryPart, Value } from '../lang/wasm'
+import { parse, BinaryPart, Value, ProgramMemory } from '../lang/wasm'
 import {
   createIdentifier,
   createLiteral,
@@ -120,8 +120,7 @@ export function useCalc({
   }, [])
 
   useEffect(() => {
-    const allVarNames = Object.keys(programMemory.root)
-    if (allVarNames.includes(newVariableName)) {
+    if (programMemory.has(newVariableName)) {
       setIsNewVariableNameUnique(false)
     } else {
       setIsNewVariableNameUnique(true)
@@ -143,17 +142,20 @@ export function useCalc({
       const code = `const __result__ = ${value}`
       const ast = parse(code)
       if (trap(ast)) return
-      const _programMem: any = { root: {}, return: null }
-      availableVarInfo.variables.forEach(({ key, value }) => {
-        _programMem.root[key] = { type: 'userVal', value, __meta: [] }
-      })
+      const _programMem: ProgramMemory = ProgramMemory.empty()
+      for (const { key, value } of availableVarInfo.variables) {
+        const error = _programMem.set(key, {
+          type: 'UserVal',
+          value,
+          __meta: [],
+        })
+        if (trap(error)) return
+      }
       executeAst({
         ast,
         engineCommandManager,
         useFakeExecutor: true,
-        programMemoryOverride: JSON.parse(
-          JSON.stringify(kclManager.programMemory)
-        ),
+        programMemoryOverride: kclManager.programMemory.clone(),
       }).then(({ programMemory }) => {
         const resultDeclaration = ast.body.find(
           (a) =>
@@ -163,7 +165,7 @@ export function useCalc({
         const init =
           resultDeclaration?.type === 'VariableDeclaration' &&
           resultDeclaration?.declarations?.[0]?.init
-        const result = programMemory?.root?.__result__?.value
+        const result = programMemory?.get('__result__')?.value
         setCalcResult(typeof result === 'number' ? String(result) : 'NAN')
         init && setValueNode(init)
       })