KCL: Improve error msg format when typechecking tag declarators

* Add number with units formatting as KCL

* Change type assertion helper to check what we need

* Fix rectangle unit test

.env.development

@@ -2,8 +2,8 @@ NODE_ENV=development
 DEV=true
 VITE_KC_API_WS_MODELING_URL=wss://api.dev.zoo.dev/ws/modeling/commands
 VITE_KC_API_BASE_URL=https://api.dev.zoo.dev
+BASE_URL=https://api.dev.zoo.dev
 VITE_KC_SITE_BASE_URL=https://dev.zoo.dev
-VITE_KC_SITE_APP_URL=https://app.dev.zoo.dev
 VITE_KC_SKIP_AUTH=false
 VITE_KC_CONNECTION_TIMEOUT_MS=5000
 # ONLY add your token in .env.development.local if you want to skip auth, otherwise this token takes precedence!

.env.production

@@ -1,7 +1,5 @@
-NODE_ENV=production
 VITE_KC_API_WS_MODELING_URL=wss://api.zoo.dev/ws/modeling/commands
 VITE_KC_API_BASE_URL=https://api.zoo.dev
 VITE_KC_SITE_BASE_URL=https://zoo.dev
-VITE_KC_SITE_APP_URL=https://app.zoo.dev
 VITE_KC_SKIP_AUTH=false
 VITE_KC_CONNECTION_TIMEOUT_MS=15000

.eslintrc

@@ -29,13 +29,6 @@
         {
           "name": "isNaN",
           "message": "Use Number.isNaN() instead."
-        },
-      ],
-      "no-restricted-syntax": [
-        "error",
-        {
-          "selector": "CallExpression[callee.object.name='Array'][callee.property.name='isArray']",
-          "message": "Use isArray() in lib/utils.ts instead of Array.isArray()."
         }
       ],
       "semi": [

.github/workflows/build-apps.yml

@@ -134,6 +134,8 @@ jobs:
           max_attempts: 3
           command: yarn install
 
+      - run: yarn tronb:vite
+
       - name: Prepare certificate and variables (Windows only)
         if: ${{ (env.IS_RELEASE == 'true' || env.IS_NIGHTLY == 'true') && matrix.os == 'windows-2022' }}
         run: |
@@ -163,8 +165,8 @@ jobs:
       - name: Build the app (debug)
         if: ${{ env.IS_RELEASE == 'false' && env.IS_NIGHTLY == 'false' }}
         # electron-builder doesn't have a concept of release vs debug,
-        # this is just not doing any codesign or release yml generation, and points to dev infra
-        run: yarn tronb:package:dev
+        # this is just not doing any codesign or release yml generation
+        run: yarn electron-builder --config
 
       - name: Build the app (release)
         if: ${{ env.IS_RELEASE == 'true' || env.IS_NIGHTLY == 'true' }}
@@ -183,7 +185,7 @@ jobs:
         with:
           timeout_minutes: 10
           max_attempts: 3
-          command: yarn tronb:package:prod
+          command: yarn electron-builder --config --publish always
 
       - name: List artifacts in out/
         run: ls -R out
@@ -244,7 +246,7 @@ jobs:
         with:
           timeout_minutes: 10
           max_attempts: 3
-          command: yarn tronb:package:prod
+          command: yarn electron-builder --config --publish always
 
       - uses: actions/upload-artifact@v4
         if: ${{ env.IS_RELEASE == 'true' }}
@@ -388,19 +390,19 @@ jobs:
 
       - name: Authenticate to Google Cloud
         if: ${{ env.IS_NIGHTLY == 'true' }}
-        uses: 'google-github-actions/auth@v2.1.8'
+        uses: 'google-github-actions/auth@v2.1.7'
         with:
           credentials_json: '${{ secrets.GOOGLE_CLOUD_DL_SA }}'
 
       - name: Set up Google Cloud SDK
         if: ${{ env.IS_NIGHTLY == 'true' }}
-        uses: google-github-actions/setup-gcloud@v2.1.4
+        uses: google-github-actions/setup-gcloud@v2.1.2
         with:
           project_id: ${{ env.GOOGLE_CLOUD_PROJECT_ID }}
 
       - name: Upload nightly files to public bucket
         if: ${{ env.IS_NIGHTLY == 'true' }}
-        uses: google-github-actions/upload-cloud-storage@v2.2.2
+        uses: google-github-actions/upload-cloud-storage@v2.2.1
         with:
           path: out
           glob: '*'

.github/workflows/e2e-tests.yml

@@ -3,6 +3,7 @@ on:
   push:
     branches: [ main ]
   pull_request:
+    branches: [ main ]
 
 concurrency:
   group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
@@ -45,15 +46,7 @@ jobs:
     runs-on: ${{ matrix.os }}
     needs: check-rust-changes
     steps:
-    - uses: actions/create-github-app-token@v1
-      id: app-token
-      with:
-        app-id: ${{ secrets.MODELING_APP_GH_APP_ID }}
-        private-key: ${{ secrets.MODELING_APP_GH_APP_PRIVATE_KEY }}
-        owner: ${{ github.repository_owner }}
     - uses: actions/checkout@v4
-      with:
-        token: ${{ steps.app-token.outputs.token }}
     - uses: actions/setup-node@v4
       with:
         node-version-file: '.nvmrc'
@@ -130,23 +123,23 @@ jobs:
       if: steps.download-wasm.outcome == 'failure'
       shell: bash
       run: yarn build:wasm
-    - name: build web
+    - name: build electron
       shell: bash
-      run: yarn tronb:vite:dev
-    - name: Run ubuntu/chrome snapshots
-      if: ${{ matrix.os == 'namespace-profile-ubuntu-8-cores' && matrix.shardIndex == 1 }}
-      shell: bash
-      # TODO: break this in its own job, for now it's not slowing down the overall execution as ubuntu is the quickest,
-      # but we could do better. This forces a large 1/1 shard of all 20 snapshot tests that runs in about 3 minutes.
-      run: |
-        PLATFORM=web yarn playwright test --config=playwright.config.ts --retries="3" --update-snapshots --grep=@snapshot  --shard=1/1
-      env:
-        CI: true
-        NODE_ENV: development
-        VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
-        VITE_KC_SKIP_AUTH: true
-        token: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
-        snapshottoken: ${{ secrets.KITTYCAD_API_TOKEN }}
+      run: yarn tron:package
+    # - name: Run ubuntu/chrome snapshots
+    #   if: ${{ matrix.os == 'namespace-profile-ubuntu-8-cores' && matrix.shardIndex == 1 }}
+    #   shell: bash
+    #   # TODO: break this in its own job, for now it's not slowing down the overall execution as ubuntu is the quickest,
+    #   # but we could do better. This forces a large 1/1 shard of all 20 snapshot tests that runs in about 3 minutes.
+    #   run: |
+    #     PLATFORM=web yarn playwright test --config=playwright.config.ts --retries="3" --update-snapshots --grep=@snapshot  --shard=1/1
+    #   env:
+    #     CI: true
+    #     NODE_ENV: development
+    #     VITE_KC_DEV_TOKEN: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
+    #     VITE_KC_SKIP_AUTH: true
+    #     token: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
+    #     snapshottoken: ${{ secrets.KITTYCAD_API_TOKEN }}
     - uses: actions/upload-artifact@v4
       if: ${{ !cancelled() && (success() || failure()) }}
       with:
@@ -160,29 +153,29 @@ jobs:
       continue-on-error: true
       run: rm -r test-results
     - name: check for changes
-      if: ${{ matrix.os == 'namespace-profile-ubuntu-8-cores' && matrix.shardIndex == 1 && github.ref != 'refs/heads/main' }}
+      if: ${{ matrix.os == 'namespace-profile-ubuntu-8-cores' && matrix.shardIndex == 1 }}
       shell: bash
       id: git-check
       run: |
-          git add e2e/playwright/snapshot-tests.spec.ts-snapshots
+          git add .
           if git status | grep -q "Changes to be committed"
           then echo "modified=true" >> $GITHUB_OUTPUT
           else echo "modified=false" >> $GITHUB_OUTPUT
           fi
-    - name: Commit changes, if any
-      if: steps.git-check.outputs.modified == 'true'
-      shell: bash
-      run: |
-        git add e2e/playwright/snapshot-tests.spec.ts-snapshots
-        git config --local user.email "github-actions[bot]@users.noreply.github.com"
-        git config --local user.name "github-actions[bot]"
-        git remote set-url origin https://${{ github.actor }}:${{ secrets.GITHUB_TOKEN }}@github.com/${{ github.repository }}.git
-        git fetch origin
-        echo ${{ github.head_ref }}
-        git checkout ${{ github.head_ref }}
-        git commit -m "A snapshot a day keeps the bugs away! 📷🐛 (OS: ${{matrix.os}})" || true
-        git push
-        git push origin ${{ github.head_ref }}
+    # - name: Commit changes, if any
+    #   if: steps.git-check.outputs.modified == 'true'
+    #   shell: bash
+    #   run: |
+    #     git add .
+    #     git config --local user.email "github-actions[bot]@users.noreply.github.com"
+    #     git config --local user.name "github-actions[bot]"
+    #     git remote set-url origin https://${{ github.actor }}:${{ secrets.GITHUB_TOKEN }}@github.com/${{ github.repository }}.git
+    #     git fetch origin
+    #     echo ${{ github.head_ref }}
+    #     git checkout ${{ github.head_ref }}
+    #     git commit -am "A snapshot a day keeps the bugs away! 📷🐛 (OS: ${{matrix.os}})" || true
+    #     git push
+    #     git push origin ${{ github.head_ref }}
     # only upload artifacts if there's actually changes
     - uses: actions/upload-artifact@v4
       if: steps.git-check.outputs.modified == 'true'

.github/workflows/publish-apps-release.yml

@@ -108,17 +108,17 @@ jobs:
         run: yarn files:set-notes
 
       - name: Authenticate to Google Cloud
-        uses: 'google-github-actions/auth@v2.1.8'
+        uses: 'google-github-actions/auth@v2.1.7'
         with:
           credentials_json: '${{ secrets.GOOGLE_CLOUD_DL_SA }}'
 
       - name: Set up Google Cloud SDK
-        uses: google-github-actions/setup-gcloud@v2.1.4
+        uses: google-github-actions/setup-gcloud@v2.1.2
         with:
           project_id: ${{ env.GOOGLE_CLOUD_PROJECT_ID }}
 
       - name: Upload release files to public bucket
-        uses: google-github-actions/upload-cloud-storage@v2.2.2
+        uses: google-github-actions/upload-cloud-storage@v2.2.1
         with:
           path: out
           glob: '*'

README.md

@@ -101,7 +101,7 @@ This will start the application and hot-reload on changes.
 
 Devtools can be opened with the usual Cmd-Opt-I (Mac) or Ctrl-Shift-I (Linux and Windows).
 
-To build with electron-builder, run `yarn tronb:package:dev` (or `yarn tronb:package:prod` to point to the .env.production variables)
+To build, run `yarn tron:package`.
 
 ## Checking out commits / Bisecting
 

docs/kcl/modules.md

@@ -57,55 +57,3 @@ Imported symbols can be renamed for convenience or to avoid name collisions.
 ```
 import increment as inc, decrement as dec from "util.kcl"
 ```
-
-## Importing files from other CAD systems
-
-`import` can also be used to import files from other CAD systems. The format of the statement is the
-same as for KCL files. You can only import the whole file, not items from it. E.g.,
-
-```
-import "tests/inputs/cube.obj"
-
-// Use `cube` just like a KCL object.
-```
-
-```
-import "tests/inputs/cube-2.sldprt" as cube
-
-// Use `cube` just like a KCL object.
-```
-
-You can make the file format explicit using a format attribute (useful if using a different
-extension), e.g.,
-
-```
-@(format = obj)
-import "tests/inputs/cube"
-```
-
-For formats lacking unit data (such as STL, OBJ, or PLY files), the default
-unit of measurement is millimeters. Alternatively you may specify the unit
-by using an attirbute. Likewise, you can also specify a coordinate system. E.g.,
-
-```
-@(unitLength = ft, coords = opengl)
-import "tests/inputs/cube.obj"
-```
-
-When importing a GLTF file, the bin file will be imported as well.
-
-Import paths are relative to the current project directory. Imports currently only work when
-using the native Modeling App, not in the browser.
-
-### Supported values
-
-File formats: `fbx`, `gltf`/`glb`, `obj`+, `ply`+, `sldprt`, `step`/`stp`, `stl`+. (Those marked with a
-'+' support customising the length unit and coordinate system).
-
-Length units: `mm` (the default), `cm`, `m`, `inch`, `ft`, `yd`.
-
-Coordinate systems:
-
-- `zoo` (the default), forward: -Y, up: +Z, handedness: right
-- `opengl`, forward: +Z, up: +Y, handedness: right
-- `vulkan`, forward: +Z, up: -Y, handedness: left

docs/kcl/offsetPlane.md

@@ -17,8 +17,8 @@ offsetPlane(std_plane: StandardPlane, offset: number) -> Plane
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `std_plane` | [`StandardPlane`](/docs/kcl/types/StandardPlane) | Which standard plane (e.g. XY) should this new plane be created from? | Yes |
-| `offset` | `number` | Distance from the standard plane this new plane will be created at. | Yes |
+| `std_plane` | [`StandardPlane`](/docs/kcl/types/StandardPlane) | One of the standard planes. | Yes |
+| `offset` | `number` |  | Yes |
 
 ### Returns
 
@@ -37,7 +37,7 @@ squareSketch = startSketchOn('XY')
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
-circleSketch = startSketchOn(offsetPlane('XY', offset = 150))
+circleSketch = startSketchOn(offsetPlane('XY', 150))
   |> circle({ center = [0, 100], radius = 50 }, %)
 
 loft([squareSketch, circleSketch])
@@ -55,7 +55,7 @@ squareSketch = startSketchOn('XZ')
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
-circleSketch = startSketchOn(offsetPlane('XZ', offset = 150))
+circleSketch = startSketchOn(offsetPlane('XZ', 150))
   |> circle({ center = [0, 100], radius = 50 }, %)
 
 loft([squareSketch, circleSketch])
@@ -73,7 +73,7 @@ squareSketch = startSketchOn('YZ')
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
-circleSketch = startSketchOn(offsetPlane('YZ', offset = 150))
+circleSketch = startSketchOn(offsetPlane('YZ', 150))
   |> circle({ center = [0, 100], radius = 50 }, %)
 
 loft([squareSketch, circleSketch])
@@ -91,7 +91,7 @@ squareSketch = startSketchOn('-XZ')
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
-circleSketch = startSketchOn(offsetPlane('-XZ', offset = -150))
+circleSketch = startSketchOn(offsetPlane('-XZ', -150))
   |> circle({ center = [0, 100], radius = 50 }, %)
 
 loft([squareSketch, circleSketch])
@@ -106,7 +106,7 @@ startSketchOn("XY")
   |> circle({ radius = 10, center = [0, 0] }, %)
 
 // Triangle on the plane 4 units above
-startSketchOn(offsetPlane("XY", offset = 4))
+startSketchOn(offsetPlane("XY", 4))
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
   |> line(end = [0, 10])

docs/kcl/segEndY.md

@@ -17,7 +17,7 @@ segEndY(tag: TagIdentifier) -> number
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
+| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) |  | Yes |
 
 ### Returns
 

docs/kcl/segStartY.md

@@ -17,7 +17,7 @@ segStartY(tag: TagIdentifier) -> number
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) | The line segment being queried by its tag | Yes |
+| `tag` | [`TagIdentifier`](/docs/kcl/types#tag-identifier) |  | Yes |
 
 ### Returns
 

docs/kcl/types.md

@@ -47,19 +47,6 @@ myObj = { a = 0, b = "thing" }
 We support two different ways of getting properties from objects, you can call
 `myObj.a` or `myObj["a"]` both work.
 
-## Binary expressions
-
-You can also do math! Let's show an example below:
-
-```
-myMathExpression = 3 + 1 * 2 / 3 - 7
-```
-
-You can nest expressions in parenthesis as well:
-
-```
-myMathExpression = 3 + (1 * 2 / (3 - 7))
-```
 
 ## Functions
 
@@ -74,107 +61,21 @@ fn myFn(x) {
 
 As you can see above `myFn` just returns whatever it is given.
 
-KCL's early drafts used positional arguments, but we now use keyword arguments. If you declare a
-function like this:
+
+## Binary expressions
+
+You can also do math! Let's show an example below:
 
 ```
-fn add(left, right) {
-  return left + right
-}
+myMathExpression = 3 + 1 * 2 / 3 - 7
 ```
 
-You can call it like this:
+You can nest expressions in parenthesis as well:
 
 ```
-total = add(left = 1, right = 2)
+myMathExpression = 3 + (1 * 2 / (3 - 7))
 ```
 
-Functions can also declare one *unlabeled* arg. If you do want to declare an unlabeled arg, it must
-be the first arg declared.
-
-```
-// The @ indicates an argument can be used without a label.
-// Note that only the first argument can use @.
-fn increment(@x) {
-  return x + 1
-}
-
-fn add(@x, delta) {
-  return x + delta
-}
-
-two = increment(1)
-three = add(1, delta = 2)
-```
-
-## Pipelines
-
-It can be hard to read repeated function calls, because of all the nested brackets.
-
-```
-i = 1
-x = h(g(f(i)))
-```
-
-You can make this easier to read by breaking it into many declarations, but that is a bit annoying.
-
-```
-i  = 1
-x0 = f(i)
-x1 = g(x0)
-x  = h(x1)
-```
-
-Instead, you can use the pipeline operator (`|>`) to simplify this.
-
-Basically, `x |> f(%)` is a shorthand for `f(x)`. The left-hand side of the `|>` gets put into
-the `%` in the right-hand side.
-
-So, this means `x |> f(%) |> g(%)` is shorthand for `g(f(x))`. The code example above, with its
-somewhat-clunky `x0` and `x1` constants could be rewritten as
-
-```
-i = 1
-x = i
-|> f(%)
-|> g(%)
-|> h(%)
-```
-
-This helps keep your code neat and avoid unnecessary declarations.
-
-## Pipelines and keyword arguments
-
-Say you have a long pipeline of sketch functions, like this:
-
-```
-startSketch()
-|> line(%, end = [3, 4])
-|> line(%, end = [10, 10])
-|> line(%, end = [-13, -14])
-|> close(%)
-```
-
-In this example, each function call outputs a sketch, and it gets put into the next function call via
-the `%`, into the first (unlabeled) argument.
-
-If a function call uses an unlabeled first parameter, it will default to `%` if it's not given. This
-means that `|> line(%, end = [3, 4])` and `|> line(end = [3, 4])` are equivalent! So the above
-could be rewritten as 
-
-```
-startSketch()
-|> line(end = [3, 4])
-|> line(end = [10, 10])
-|> line(end = [-13, -14])
-|> close()
-```
-
-Note that we are still in the process of migrating KCL's standard library to use keyword arguments. So some
-functions are still unfortunately using positional arguments. We're moving them over, so keep checking back.
-Some functions like `angledLine`, `startProfileAt` etc are still using the old positional argument syntax.
-Check the docs page for each function and look at its examples to see.
-
 ## Tags
 
 Tags are used to give a name (tag) to a specific path.
@@ -187,17 +88,17 @@ way:
 ```
 startSketchOn('XZ')
   |> startProfileAt(origin, %)
-  |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-  |> angledLine({
-       angle = segAng(rectangleSegmentA001) - 90,
-       length = 196.99,
-     }, %, $rectangleSegmentB001)
-  |> angledLine({
-       angle = segAng(rectangleSegmentA001),
-       length = -segLen(rectangleSegmentA001),
-     }, %, $rectangleSegmentC001)
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close()
+  |> angledLine([0, 191.26], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       196.99
+     ], %, $rectangleSegmentB001)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %, $rectangleSegmentC001)
+  |> lineTo([profileStartX(%), profileStartY(%)], %)
+  |> close(%)
 ```
 
 ### Tag Identifier
@@ -220,17 +121,17 @@ However if the code was written like this:
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-    |> angledLine({
-         angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99
-       }, %, $rectangleSegmentB001)
-    |> angledLine({
-         angle = segAng(rectangleSegmentA001),
-         length = -segLen(rectangleSegmentA001)
-       }, %, $rectangleSegmentC001)
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()
+    |> angledLine([0, 191.26], %, $rectangleSegmentA001)
+    |> angledLine([
+         segAng(rectangleSegmentA001) - 90,
+         196.99
+       ], %, $rectangleSegmentB001)
+    |> angledLine([
+         segAng(rectangleSegmentA001),
+         -segLen(rectangleSegmentA001)
+       ], %, $rectangleSegmentC001)
+    |> lineTo([profileStartX(%), profileStartY(%)], %)
+    |> close(%)
 }
 
 rect([0, 0])
@@ -248,17 +149,17 @@ For example the following code works.
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
-    |> angledLine({
-         angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99
-       }, %, $rectangleSegmentB001)
-    |> angledLine({
-         angle = segAng(rectangleSegmentA001),
-         length = -segLen(rectangleSegmentA001)
-       }, %, $rectangleSegmentC001)
-    |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-    |> close()
+    |> angledLine([0, 191.26], %, $rectangleSegmentA001)
+    |> angledLine([
+         segAng(rectangleSegmentA001) - 90,
+         196.99
+       ], %, $rectangleSegmentB001)
+    |> angledLine([
+         segAng(rectangleSegmentA001),
+         -segLen(rectangleSegmentA001)
+       ], %, $rectangleSegmentC001)
+    |> lineTo([profileStartX(%), profileStartY(%)], %)
+    |> close(%)
 }
 
 rect([0, 0])

docs/kcl/types/ArtifactId.md

@@ -1,15 +0,0 @@
----
-title: "ArtifactId"
-excerpt: ""
-layout: manual
----
-
-
-**Type:** `string` (`uuid`)
-
-
-
-
-
-
-

docs/kcl/types/CircularPattern2dData.md

@@ -20,6 +20,5 @@ Data for a circular pattern on a 2D sketch.
 | `center` |`[number, number]`| The center about which to make the pattern. This is a 2D vector. | No |
 | `arcDegrees` |`number`| The arc angle (in degrees) to place the repetitions. Must be greater than 0. | No |
 | `rotateDuplicates` |`boolean`| Whether or not to rotate the duplicates as they are copied. | No |
-| `useOriginal` |`boolean`| If the target being patterned is itself a pattern, then, should you use the original solid, or the pattern? | No |
 
 

docs/kcl/types/CircularPattern3dData.md

@@ -21,6 +21,5 @@ Data for a circular pattern on a 3D model.
 | `center` |`[number, number, number]`| The center about which to make the pattern. This is a 3D vector. | No |
 | `arcDegrees` |`number`| The arc angle (in degrees) to place the repetitions. Must be greater than 0. | No |
 | `rotateDuplicates` |`boolean`| Whether or not to rotate the duplicates as they are copied. | No |
-| `useOriginal` |`boolean`| If the target being patterned is itself a pattern, then, should you use the original solid, or the pattern? | No |
 
 

docs/kcl/types/EnvironmentRef.md

@@ -1,16 +0,0 @@
----
-title: "EnvironmentRef"
-excerpt: ""
-layout: manual
----
-
-
-[`SnapshotRef`](/docs/kcl/types/SnapshotRef)
-
-
-
-
-
-
-
-

docs/kcl/types/Face.md

@@ -17,10 +17,9 @@ A face.
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
 | `id` |`string`| The id of the face. | No |
-| `artifactId` |[`ArtifactId`](/docs/kcl/types/ArtifactId)| The artifact ID. | No |
 | `value` |`string`| The tag of the face. | No |
-| `xAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the face's X axis be? | No |
-| `yAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the face's Y axis be? | No |
+| `xAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the face’s X axis be? | No |
+| `yAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the face’s Y axis be? | No |
 | `zAxis` |[`Point3d`](/docs/kcl/types/Point3d)| The z-axis (normal). | No |
 | `solid` |[`Solid`](/docs/kcl/types/Solid)| The solid the face is on. | No |
 | `units` |[`UnitLen`](/docs/kcl/types/UnitLen)| A face. | No |

docs/kcl/types/Helix.md

@@ -17,7 +17,6 @@ A helix.
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
 | `value` |`string`| The id of the helix. | No |
-| `artifactId` |[`ArtifactId`](/docs/kcl/types/ArtifactId)| The artifact ID. | No |
 | `revolutions` |`number`| Number of revolutions. | No |
 | `angleStart` |`number`| Start angle (in degrees). | No |
 | `ccw` |`boolean`| Is the helix rotation counter clockwise? | No |

docs/kcl/types/HelixData.md

@@ -0,0 +1,26 @@
+---
+title: "HelixData"
+excerpt: "Data for a helix."
+layout: manual
+---
+
+Data for a helix.
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `revolutions` |`number`| Number of revolutions. | No |
+| `angleStart` |`number`| Start angle (in degrees). | No |
+| `ccw` |`boolean`| Is the helix rotation counter clockwise? The default is `false`. | No |
+| `length` |`number`| Length of the helix. This is not necessary if the helix is created around an edge. If not given the length of the edge is used. | No |
+| `radius` |`number`| Radius of the helix. | No |
+| `axis` |[`Axis3dOrEdgeReference`](/docs/kcl/types/Axis3dOrEdgeReference)| Axis to use as mirror. | No |
+
+

docs/kcl/types/HelixValue.md

@@ -17,7 +17,6 @@ A helix.
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
 | `value` |`string`| The id of the helix. | No |
-| `artifactId` |[`ArtifactId`](/docs/kcl/types/ArtifactId)| The artifact ID. | No |
 | `revolutions` |`number`| Number of revolutions. | No |
 | `angleStart` |`number`| Start angle (in degrees). | No |
 | `ccw` |`boolean`| Is the helix rotation counter clockwise? | No |

docs/kcl/types/KclValue.md

@@ -59,7 +59,23 @@ Any KCL value.
 |----------|------|-------------|----------|
 | `type` |enum: `Number`|  | No |
 | `value` |`number`|  | No |
-| `ty` |[`NumericType`](/docs/kcl/types/NumericType)| Any KCL value. | No |
+| `__meta` |`[` [`Metadata`](/docs/kcl/types/Metadata) `]`|  | No |
+
+
+----
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `type` |enum: `Int`|  | No |
+| `value` |`integer`|  | No |
 | `__meta` |`[` [`Metadata`](/docs/kcl/types/Metadata) `]`|  | No |
 
 
@@ -295,7 +311,7 @@ Data for an imported geometry.
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
 | `type` |enum: `Function`|  | No |
-| `memory` |[`EnvironmentRef`](/docs/kcl/types/EnvironmentRef)| Any KCL value. | No |
+| `memory` |[`ProgramMemory`](/docs/kcl/types/ProgramMemory)| Any KCL value. | No |
 | `__meta` |`[` [`Metadata`](/docs/kcl/types/Metadata) `]`|  | No |
 
 
@@ -335,23 +351,6 @@ Data for an imported geometry.
 
 ----
 
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Tombstone`|  | No |
-| `value` |`null`|  | No |
-| `__meta` |`[` [`Metadata`](/docs/kcl/types/Metadata) `]`|  | No |
-
-
-----
-
 
 
 

docs/kcl/types/NumericType.md

@@ -1,250 +0,0 @@
----
-title: "NumericType"
-excerpt: ""
-layout: manual
----
-
-
-
-
-
-
-**This schema accepts exactly one of the following:**
-
-
-**Type:** `object`
-
-
-
-**This schema accepts exactly one of the following:**
-
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Count`|  | No |
-
-
-----
-
-**Type:** `object`
-
-
-
-**This schema accepts exactly one of the following:**
-
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Mm`|  | No |
-
-
-----
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Cm`|  | No |
-
-
-----
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `M`|  | No |
-
-
-----
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Inches`|  | No |
-
-
-----
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Feet`|  | No |
-
-
-----
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Yards`|  | No |
-
-
-----
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Length`|  | No |
-
-
-----
-
-**Type:** `object`
-
-
-
-**This schema accepts exactly one of the following:**
-
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Degrees`|  | No |
-
-
-----
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Radians`|  | No |
-
-
-----
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Angle`|  | No |
-
-
-----
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Known`|  | No |
-
-
-----
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Default`|  | No |
-| `len` |[`UnitLen`](/docs/kcl/types/UnitLen)|  | No |
-| `angle` |[`UnitAngle`](/docs/kcl/types/UnitAngle)|  | No |
-
-
-----
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Unknown`|  | No |
-
-
-----
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `Any`|  | No |
-
-
-----
-
-
-
-

docs/kcl/types/Path.md

@@ -98,29 +98,6 @@ a complete arc
 | `__geoMeta` |[`GeoMeta`](/docs/kcl/types/GeoMeta)| Metadata. | No |
 
 
-----
-A base path.
-
-**Type:** `object`
-
-
-
-
-
-## Properties
-
-| Property | Type | Description | Required |
-|----------|------|-------------|----------|
-| `type` |enum: `CircleThreePoint`|  | No |
-| `p1` |`[number, number]`| Point 1 of the circle | No |
-| `p2` |`[number, number]`| Point 2 of the circle | No |
-| `p3` |`[number, number]`| Point 3 of the circle | No |
-| `from` |`[number, number]`| The from point. | No |
-| `to` |`[number, number]`| The to point. | No |
-| `tag` |[`TagDeclarator`](/docs/kcl/types#tag-declaration)| The tag of the path. | No |
-| `__geoMeta` |[`GeoMeta`](/docs/kcl/types/GeoMeta)| Metadata. | No |
-
-
 ----
 A path that is horizontal.
 

docs/kcl/types/Plane.md

@@ -17,11 +17,10 @@ A plane.
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
 | `id` |`string`| The id of the plane. | No |
-| `artifactId` |[`ArtifactId`](/docs/kcl/types/ArtifactId)| The artifact ID. | No |
 | `value` |[`PlaneType`](/docs/kcl/types/PlaneType)| A plane. | No |
 | `origin` |[`Point3d`](/docs/kcl/types/Point3d)| Origin of the plane. | No |
-| `xAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the plane's X axis be? | No |
-| `yAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the plane's Y axis be? | No |
+| `xAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the plane’s X axis be? | No |
+| `yAxis` |[`Point3d`](/docs/kcl/types/Point3d)| What should the plane’s Y axis be? | No |
 | `zAxis` |[`Point3d`](/docs/kcl/types/Point3d)| The z-axis (normal). | No |
 | `units` |[`UnitLen`](/docs/kcl/types/UnitLen)| A plane. | No |
 | `__meta` |`[` [`Metadata`](/docs/kcl/types/Metadata) `]`|  | No |