Add back old window detection heuristic

.codespellrc

@@ -1,3 +1,3 @@
 [codespell]
-ignore-words-list: crate,everytime,inout,co-ordinate,ot,nwo,atleast,ue,afterall,ser,fromM,FromM
+ignore-words-list: crate,everytime,inout,co-ordinate,ot,nwo,atleast,ue,afterall,ser
 skip: **/target,node_modules,build,dist,./out,**/Cargo.lock,./docs/kcl/*.md,.yarn.lock,**/yarn.lock,./openapi/*.json,./packages/codemirror-lang-kcl/test/all.test.ts,./public/kcl-samples,./rust/kcl-lib/tests/kcl_samples,tsconfig.tsbuildinfo

.github/ci-cd-scripts/start-vector-macos.sh

@@ -1,24 +0,0 @@
-#!/bin/bash
-set -euo pipefail
-
-# Install vector
-brew tap vectordotdev/brew && brew install vector
-
-# Configure vector
-mkdir -p /tmp/vector
-cp .github/workflows/vector.toml /tmp/vector.toml
-sed -i '' "s#OS_NAME#${OS_NAME}#g" /tmp/vector.toml
-sed -i '' "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
-sed -i '' "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
-sed -i '' "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
-sed -i '' "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
-sed -i '' "s#GH_ACTIONS_AXIOM_TOKEN#${GH_ACTIONS_AXIOM_TOKEN}#g" /tmp/vector.toml
-
-# Display settings
-echo
-echo 'Vector config:'
-cat /tmp/vector.toml
-echo
-
-# Start in the background
-$(brew --prefix)/opt/vector/bin/vector --config /tmp/vector.toml &

.github/ci-cd-scripts/start-vector-ubuntu.sh

@@ -1,24 +0,0 @@
-#!/bin/bash
-set -euo pipefail
-
-# Install vector
-curl --proto '=https' --tlsv1.2 -sSfL https://sh.vector.dev | bash -s -- -y
-
-# Configure vector
-mkdir -p /tmp/vector
-cp .github/workflows/vector.toml /tmp/vector.toml
-sed -i "s#OS_NAME#${OS_NAME}#g" /tmp/vector.toml
-sed -i "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
-sed -i "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
-sed -i "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
-sed -i "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
-sed -i "s#GH_ACTIONS_AXIOM_TOKEN#${GH_ACTIONS_AXIOM_TOKEN}#g" /tmp/vector.toml
-
-# Display settings
-echo
-echo 'Vector config:'
-cat /tmp/vector.toml
-echo
-
-# Start in background
-${HOME}/.vector/bin/vector --config /tmp/vector.toml &

.github/workflows/build-and-store-wasm.yml

@@ -24,7 +24,7 @@ jobs:
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
           cache: false # Configured below.
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
       - name: Rust Cache

.github/workflows/build-apps.yml

@@ -77,7 +77,7 @@ jobs:
         with:
           cache: false # Configured below.
 
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         if: ${{ steps.wasm.outputs.should-build-wasm == 'true' }}
         with:
           tool: wasm-pack
@@ -207,13 +207,6 @@ jobs:
           smctl.exe keypair ls
           C:\Windows\System32\certutil.exe -csp "DigiCert Signing Manager KSP" -key -user
           smksp_cert_sync.exe
-          smctl windows certsync
-        # This last line `smctl windows certsync` was added after windows codesign failures started happening
-        # with nightly-v25.4.10. It looks like `smksp_cert_sync.exe` used to do the sync to the local cert store,
-        # but stopped doing it overnight. This extra call that I randomly got from this azure-related doc page
-        # https://docs.digicert.com/en/digicert-keylocker/code-signing/sign-with-third-party-signing-tools/windows-applications/sign-azure-apps-with-signtool-using-ksp-library.html#sync-certificates--windows-only--618365
-        # seems to be doing that extra sync that we need for scripts/sign-win.js to work.
-        # TODO: we still need to make sign-win.js errors fail the workflow, see issue #6276
         shell: cmd
 
       - name: Build the app (debug)
@@ -385,7 +378,7 @@ jobs:
           NOTES: ${{ needs.prepare-files.outputs.notes }}
           PUB_DATE: ${{ github.event.repository.updated_at }}
           WEBSITE_DIR: ${{ env.IS_NIGHTLY == 'true' && 'dl.zoo.dev/releases/modeling-app/nightly' || 'dl.zoo.dev/releases/modeling-app' }}
-          URL_CODED_NAME: ${{ env.IS_NIGHTLY == 'true' && 'Zoo%20Design%20Studio%20%28Nightly%29' || 'Zoo%20Design%20Studio' }}
+          URL_CODED_NAME: ${{ env.IS_NIGHTLY == 'true' && 'Zoo%20Modeling%20App%20%28Nightly%29' || 'Zoo%20Modeling%20App' }}
         run: |
           RELEASE_DIR=https://${WEBSITE_DIR}
           jq --null-input \

.github/workflows/cargo-test.yml

@@ -34,11 +34,20 @@ jobs:
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
           cache: false # Configured below.
-      - name: Start Vector
-        run: .github/ci-cd-scripts/start-vector-ubuntu.sh
-        env:
-          GH_ACTIONS_AXIOM_TOKEN: ${{ secrets.GH_ACTIONS_AXIOM_TOKEN }}
-          OS_NAME: ${{ env.OS_NAME }}
+      - name: Install vector
+        run: |
+          curl --proto '=https' --tlsv1.2 -sSfL https://sh.vector.dev > /tmp/vector.sh
+          chmod +x /tmp/vector.sh
+          /tmp/vector.sh -y -no-modify-path
+          mkdir -p /tmp/vector
+          cp .github/workflows/vector.toml /tmp/vector.toml
+          sed -i "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
+          sed -i "s#GH_ACTIONS_AXIOM_TOKEN#${{secrets.GH_ACTIONS_AXIOM_TOKEN}}#g" /tmp/vector.toml
+          cat /tmp/vector.toml
+          ${HOME}/.vector/bin/vector --config /tmp/vector.toml &
       - uses: taiki-e/install-action@cargo-llvm-cov
       - uses: taiki-e/install-action@nextest
       - name: Install just

.github/workflows/e2e-tests.yml

@@ -140,7 +140,7 @@ jobs:
         with:
           cache: false # Configured below.
 
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         if: ${{ needs.conditions.outputs.should-run == 'true' && steps.wasm.outputs.should-build-wasm == 'true' }}
         with:
           tool: wasm-pack
@@ -231,11 +231,6 @@ jobs:
         env:
           token: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
           snapshottoken: ${{ secrets.KITTYCAD_API_TOKEN }}
-          TAB_API_URL: ${{ secrets.TAB_API_URL }}
-          TAB_API_KEY: ${{ secrets.TAB_API_KEY }}
-          CI_COMMIT_SHA: ${{ github.event.pull_request.head.sha }}
-          CI_PR_NUMBER: ${{ github.event.pull_request.number }}
-          TARGET: web
 
       - uses: actions/upload-artifact@v4
         if: ${{ needs.conditions.outputs.should-run == 'true' && !cancelled() && (success() || failure()) }}
@@ -286,7 +281,7 @@ jobs:
         os:
           - "runs-on=${{ github.run_id }}/family=i7ie.2xlarge/image=ubuntu22-full-x64"
           - namespace-profile-macos-8-cores
-          - windows-latest-8-cores
+          - windows-latest
         shardIndex: [1, 2, 3, 4]
         shardTotal: [4]
         # Disable macos and windows tests on hourly e2e tests since we only care
@@ -297,7 +292,7 @@ jobs:
         exclude:
           - os: namespace-profile-macos-8-cores
             isScheduled: true
-          - os: windows-latest-8-cores
+          - os: windows-latest
             isScheduled: true
         # TODO: add ref here for main and latest release tag
     runs-on: ${{ matrix.os }}
@@ -344,12 +339,22 @@ jobs:
         if: needs.conditions.outputs.should-run == 'true'
         run: yarn tronb:vite:dev
 
-      - name: Start Vector
-        if: ${{ needs.conditions.outputs.should-run == 'true' && !contains(matrix.os, 'windows') }}
-        run: .github/ci-cd-scripts/start-vector-${{ env.OS_NAME }}.sh
-        env:
-          GH_ACTIONS_AXIOM_TOKEN: ${{ secrets.GH_ACTIONS_AXIOM_TOKEN }}
-          OS_NAME: ${{ env.OS_NAME }}
+      - name: Install vector
+        if: ${{ needs.conditions.outputs.should-run == 'true' && contains(matrix.os, 'ubuntu') }}
+        shell: bash
+        run: |
+          curl --proto '=https' --tlsv1.2 -sSfL https://sh.vector.dev > /tmp/vector.sh
+          chmod +x /tmp/vector.sh
+          /tmp/vector.sh -y -no-modify-path
+          mkdir -p /tmp/vector
+          cp .github/workflows/vector.toml /tmp/vector.toml
+          sed -i "s#GITHUB_WORKFLOW#${GITHUB_WORKFLOW}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_REPOSITORY#${GITHUB_REPOSITORY}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_SHA#${GITHUB_SHA}#g" /tmp/vector.toml
+          sed -i "s#GITHUB_REF_NAME#${GITHUB_REF_NAME}#g" /tmp/vector.toml
+          sed -i "s#GH_ACTIONS_AXIOM_TOKEN#${{secrets.GH_ACTIONS_AXIOM_TOKEN}}#g" /tmp/vector.toml
+          cat /tmp/vector.toml
+          ${HOME}/.vector/bin/vector --config /tmp/vector.toml &
 
       - uses: actions/download-artifact@v4
         if: ${{ needs.conditions.outputs.should-run == 'true' && !cancelled() && (success() || failure()) }}
@@ -365,16 +370,11 @@ jobs:
         with:
           shell: bash
           command: .github/ci-cd-scripts/playwright-electron.sh ${{matrix.shardIndex}} ${{matrix.shardTotal}} ${{ env.OS_NAME }}
-          timeout_minutes: 30
-          max_attempts: 9
+          timeout_minutes: 45
+          max_attempts: 15
         env:
           FAIL_ON_CONSOLE_ERRORS: true
           token: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
-          TAB_API_URL: ${{ secrets.TAB_API_URL }}
-          TAB_API_KEY: ${{ secrets.TAB_API_KEY }}
-          CI_COMMIT_SHA: ${{ github.event.pull_request.head.sha }}
-          CI_PR_NUMBER: ${{ github.event.pull_request.number }}
-          TARGET: desktop
 
       - uses: actions/upload-artifact@v4
         if: ${{ needs.conditions.outputs.should-run == 'true' && always() }}

.github/workflows/nix.yml

@@ -1,55 +0,0 @@
-name: Test Nix Flake
-
-on:
-  push:
-    branches: [main]
-  pull_request:
-  workflow_dispatch:
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-jobs:
-  nix-flake-check:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          submodules: recursive
-
-      - uses: cachix/install-nix-action@v31
-        with:
-          nix_path: nixpkgs=channel:nixos-unstable
-
-      - name: nix flake check for all platforms
-        run: |
-          nix flake check --all-systems
-
-  nix-build-linux:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          submodules: recursive
-
-      - uses: cachix/install-nix-action@v31
-        with:
-          nix_path: nixpkgs=channel:nixos-unstable
-
-      - name: nix build . for x86_64-linux
-        run: nix build .
-
-  nix-build-macos:
-    runs-on: macos-latest
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          submodules: recursive
-
-      - uses: cachix/install-nix-action@v31
-        with:
-          nix_path: nixpkgs=channel:nixos-unstable
-
-      - name: nix build . for x86_64-darwin
-        run: nix build .
-

.github/workflows/static-analysis.yml

@@ -51,7 +51,7 @@ jobs:
         with:
           cache: false # Configured below.
 
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
 
@@ -191,7 +191,7 @@ jobs:
           cache: 'yarn'
 
       - run: yarn install
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
 
@@ -236,7 +236,7 @@ jobs:
           cache: 'yarn'
 
       - run: yarn install
-      - uses: taiki-e/install-action@d4635f2de61c8b8104d59cd4aede2060638378cc
+      - uses: taiki-e/install-action@37bdc826eaedac215f638a96472df572feab0f9b
         with:
           tool: wasm-pack
 

.github/workflows/vector.toml

@@ -8,7 +8,6 @@ include = ["/tmp/github-actions.log"]
 type = "remap"
 inputs = [ "github-actions-file" ]
 source = '''
-.platform = "OS_NAME"
 .action = "GITHUB_WORKFLOW"
 .repo = "GITHUB_REPOSITORY"
 .sha = "GITHUB_SHA"

.gitignore

@@ -26,7 +26,6 @@ yarn-error.log*
 .idea
 .vscode
 .helix
-result
 
 # rust
 rust/target

Makefile

@@ -5,18 +5,11 @@ all: install build check
 # INSTALL
 
 ifeq ($(OS),Windows_NT)
-export WINDOWS := true
-ifndef MSYSTEM
-export POWERSHELL := true
-endif
-endif
-
-ifdef WINDOWS
-CARGO ?= $(USERPROFILE)/.cargo/bin/cargo.exe
-WASM_PACK ?= $(USERPROFILE)/.cargo/bin/wasm-pack.exe
+	CARGO ?= ~/.cargo/bin/cargo.exe
+	WASM_PACK ?= ~/.cargo/bin/wasm-pack.exe
 else
-CARGO ?= ~/.cargo/bin/cargo
-WASM_PACK ?= ~/.cargo/bin/wasm-pack
+	CARGO ?= ~/.cargo/bin/cargo
+	WASM_PACK ?= ~/.cargo/bin/wasm-pack
 endif
 
 .PHONY: install
@@ -24,21 +17,21 @@ install: node_modules/.yarn-integrity $(CARGO) $(WASM_PACK) ## Install dependenc
 
 node_modules/.yarn-integrity: package.json yarn.lock
 	yarn install
-ifdef POWERSHELL
+ifeq ($(OS),Windows_NT)
 	@ type nul > $@
 else
 	@ touch $@
 endif
 
 $(CARGO):
-ifdef WINDOWS
+ifeq ($(OS),Windows_NT)
 	yarn install:rust:windows
 else
 	yarn install:rust
 endif
 
 $(WASM_PACK):
-ifdef WINDOWS
+ifeq ($(OS),Windows_NT)
 	yarn install:wasm-pack:cargo
 else
 	yarn install:wasm-pack:sh
@@ -64,7 +57,7 @@ build-web: install public/kcl_wasm_lib_bg.wasm build/index.html
 build-desktop: install public/kcl_wasm_lib_bg.wasm .vite/build/main.js
 
 public/kcl_wasm_lib_bg.wasm: $(CARGO_SOURCES) $(RUST_SOURCES)
-ifdef WINDOWS
+ifeq ($(OS),Windows_NT)
 	yarn build:wasm:dev:windows
 else
 	yarn build:wasm:dev
@@ -147,8 +140,8 @@ endif
 
 .PHONY: clean
 clean: ## Delete all artifacts
-ifdef POWERSHELL
-	git clean --force -d -x --exclude=.env* --exclude=**/*.env
+ifeq ($(OS),Windows_NT)
+	git clean --force -d -X
 else
 	rm -rf .vite/ build/
 	rm -rf trace.zip playwright-report/ test-results/
@@ -159,7 +152,7 @@ endif
 
 .PHONY: help
 help: install
-ifdef POWERSHELL
+ifeq ($(OS),Windows_NT)
 	@ powershell -Command "Get-Content $(MAKEFILE_LIST) | Select-String -Pattern '^[^\s]+:.*##\s.*$$' | ForEach-Object { $$line = $$_.Line -split ':.*?##\s+'; Write-Host -NoNewline $$line[0].PadRight(30) -ForegroundColor Cyan; Write-Host $$line[1] }"
 else
 	@ grep -E '^[^[:space:]]+:.*## .*$$' $(MAKEFILE_LIST) | awk 'BEGIN {FS = ":.*?## "}; {printf "\033[36m%-30s\033[0m %s\n", $$1, $$2}'

docs/kcl/abs.md

@@ -36,9 +36,9 @@ myAngle = -120
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [8, 0])
-  |> angledLine(angle = abs(myAngle), length = 5)
+  |> angledLine({ angle = abs(myAngle), length = 5 }, %)
   |> line(end = [-5, 0])
-  |> angledLine(angle = myAngle, length = 5)
+  |> angledLine({ angle = myAngle, length = 5 }, %)
   |> close()
 
 baseExtrusion = extrude(sketch001, length = 5)

docs/kcl/acos.md

@@ -33,7 +33,10 @@ acos(num: number): number
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = toDegrees(acos(0.5)), length = 10)
+  |> angledLine({
+       angle = toDegrees(acos(0.5)),
+       length = 10
+     }, %)
   |> line(end = [5, 0])
   |> line(endAbsolute = [12, 0])
   |> close()

docs/kcl/angleToMatchLengthX.md

@@ -36,7 +36,7 @@ angleToMatchLengthX(
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [2, 5], tag = $seg01)
-  |> angledLine(angle = -angleToMatchLengthX(seg01, 7, %), endAbsoluteX = 10)
+  |> angledLineToX([-angleToMatchLengthX(seg01, 7, %), 10], %)
   |> close()
 
 extrusion = extrude(sketch001, length = 5)

docs/kcl/angleToMatchLengthY.md

@@ -36,7 +36,10 @@ angleToMatchLengthY(
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [1, 2], tag = $seg01)
-  |> angledLine(angle = angleToMatchLengthY(seg01, 15, %), length = 5)
+  |> angledLine({
+       angle = angleToMatchLengthY(seg01, 15, %),
+       length = 5
+     }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/angledLine.md

@@ -10,13 +10,8 @@ Draw a line segment relative to the current origin using the polar measure of so
 
 ```js
 angledLine(
+  data: AngledLineData,
   sketch: Sketch,
-  angle: number,
-  length?: number,
-  lengthX?: number,
-  lengthY?: number,
-  endAbsoluteX?: number,
-  endAbsoluteY?: number,
   tag?: TagDeclarator,
 ): Sketch
 ```
@@ -26,14 +21,9 @@ angledLine(
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | Which sketch should this path be added to? | Yes |
-| `angle` | [`number`](/docs/kcl/types/number) | Which angle should the line be drawn at? | Yes |
-| `length` | [`number`](/docs/kcl/types/number) | Draw the line this distance along the given angle. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
-| `lengthX` | [`number`](/docs/kcl/types/number) | Draw the line this distance along the X axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
-| `lengthY` | [`number`](/docs/kcl/types/number) | Draw the line this distance along the Y axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
-| `endAbsoluteX` | [`number`](/docs/kcl/types/number) | Draw the line along the given angle until it reaches this point along the X axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
-| `endAbsoluteY` | [`number`](/docs/kcl/types/number) | Draw the line along the given angle until it reaches this point along the Y axis. Only one of `length`, `lengthX`, `lengthY`, `lengthAbsoluteEndX`, `lengthAbsoluteEndY` can be given. | No |
-| [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Create a new tag which refers to this line | No |
+| `data` | [`AngledLineData`](/docs/kcl/types/AngledLineData) | Data to draw an angled line. | Yes |
+| `sketch` | [`Sketch`](/docs/kcl/types/Sketch) |  | Yes |
+| [`tag`](/docs/kcl/types/tag) | [`TagDeclarator`](/docs/kcl/types#tag-declaration) |  | No |
 
 ### Returns
 
@@ -46,7 +36,7 @@ angledLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> yLine(endAbsolute = 15)
-  |> angledLine(angle = 30, length = 15)
+  |> angledLine({ angle = 30, length = 15 }, %)
   |> line(end = [8, -10])
   |> yLine(endAbsolute = 0)
   |> close()

docs/kcl/appearance.md

@@ -188,9 +188,9 @@ example = extrude(exampleSketch, length = 1)
 sweepPath = startSketchOn(XZ)
   |> startProfileAt([0.05, 0.05], %)
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90, radius = 5)
+  |> tangentialArc({ offset = 90, radius = 5 }, %)
   |> line(end = [-3, 0])
-  |> tangentialArc(angle = -90, radius = 5)
+  |> tangentialArc({ offset = -90, radius = 5 }, %)
   |> line(end = [0, 7])
 
 pipeHole = startSketchOn(XY)

docs/kcl/asin.md

@@ -33,7 +33,10 @@ asin(num: number): number
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = toDegrees(asin(0.5)), length = 20)
+  |> angledLine({
+       angle = toDegrees(asin(0.5)),
+       length = 20
+     }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/atan.md

@@ -33,7 +33,10 @@ atan(num: number): number
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = toDegrees(atan(1.25)), length = 20)
+  |> angledLine({
+       angle = toDegrees(atan(1.25)),
+       length = 20
+     }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/atan2.md

@@ -37,7 +37,10 @@ atan2(
 ```js
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = toDegrees(atan2(1.25, 2)), length = 20)
+  |> angledLine({
+       angle = toDegrees(atan2(1.25, 2)),
+       length = 20
+     }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/consts/std-math-E.md

@@ -17,10 +17,10 @@ std::math::E: number = 2.71828182845904523536028747135266250_
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(
+  |> angledLine({
     angle = 30,
     length = 2 * E ^ 2,
-  )
+  }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/consts/std-math-PI.md

@@ -18,7 +18,7 @@ std::math::PI: number = 3.14159265358979323846264338327950288_
 circumference = 70
 
 exampleSketch = startSketchOn(XZ)
- |> circle(center = [0, 0], radius = circumference / (2 * PI))
+ |> circle(center = [0, 0], radius = circumference/ (2 * PI))
 
 example = extrude(exampleSketch, length = 5)
 ```

docs/kcl/consts/std-math-TAU.md

@@ -17,10 +17,10 @@ std::math::TAU: number = 6.28318530717958647692528676655900577_
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(
+  |> angledLine({
     angle = 50,
     length = 10 * TAU,
-  )
+  }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/e.md

@@ -30,7 +30,7 @@ e(): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 30, length = 2 * e() ^ 2)
+  |> angledLine({ angle = 30, length = 2 * e() ^ 2 }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/getNextAdjacentEdge.md

@@ -30,10 +30,10 @@ getNextAdjacentEdge(tag: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
-  |> angledLine(angle = 60, length = 10)
-  |> angledLine(angle = 120, length = 10)
+  |> angledLine({ angle = 60, length = 10 }, %)
+  |> angledLine({ angle = 120, length = 10 }, %)
   |> line(end = [-10, 0])
-  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
+  |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/getOppositeEdge.md

@@ -30,10 +30,10 @@ getOppositeEdge(tag: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
-  |> angledLine(angle = 60, length = 10)
-  |> angledLine(angle = 120, length = 10)
+  |> angledLine({ angle = 60, length = 10 }, %)
+  |> angledLine({ angle = 120, length = 10 }, %)
   |> line(end = [-10, 0])
-  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
+  |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/getPreviousAdjacentEdge.md

@@ -30,10 +30,10 @@ getPreviousAdjacentEdge(tag: TagIdentifier): Uuid
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0])
-  |> angledLine(angle = 60, length = 10)
-  |> angledLine(angle = 120, length = 10)
+  |> angledLine({ angle = 60, length = 10 }, %)
+  |> angledLine({ angle = 120, length = 10 }, %)
   |> line(end = [-10, 0])
-  |> angledLine(angle = 240, length = 10, tag = $referenceEdge)
+  |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/hollow.md

@@ -65,7 +65,7 @@ case = startSketchOn(-XZ)
   |> startProfileAt([-size, -size], %)
   |> line(end = [2 * size, 0])
   |> line(end = [0, 2 * size])
-  |> tangentialArc(endAbsolute = [-size, size])
+  |> tangentialArcTo([-size, size], %)
   |> close()
   |> extrude(length = 65)
 

docs/kcl/index.md

@@ -43,7 +43,11 @@ layout: manual
   * [`angleToMatchLengthX`](kcl/angleToMatchLengthX)
   * [`angleToMatchLengthY`](kcl/angleToMatchLengthY)
   * [`angledLine`](kcl/angledLine)
+  * [`angledLineOfXLength`](kcl/angledLineOfXLength)
+  * [`angledLineOfYLength`](kcl/angledLineOfYLength)
   * [`angledLineThatIntersects`](kcl/angledLineThatIntersects)
+  * [`angledLineToX`](kcl/angledLineToX)
+  * [`angledLineToY`](kcl/angledLineToY)
   * [`appearance`](kcl/appearance)
   * [`arc`](kcl/arc)
   * [`arcTo`](kcl/arcTo)
@@ -61,15 +65,11 @@ layout: manual
   * [`chamfer`](kcl/chamfer)
   * [`circleThreePoint`](kcl/circleThreePoint)
   * [`close`](kcl/close)
+  * [`cm`](kcl/cm)
   * [`extrude`](kcl/extrude)
   * [`fillet`](kcl/fillet)
   * [`floor`](kcl/floor)
-  * [`fromCm`](kcl/fromCm)
-  * [`fromFt`](kcl/fromFt)
-  * [`fromInches`](kcl/fromInches)
-  * [`fromM`](kcl/fromM)
-  * [`fromMm`](kcl/fromMm)
-  * [`fromYd`](kcl/fromYd)
+  * [`ft`](kcl/ft)
   * [`getCommonEdge`](kcl/getCommonEdge)
   * [`getNextAdjacentEdge`](kcl/getNextAdjacentEdge)
   * [`getOppositeEdge`](kcl/getOppositeEdge)
@@ -77,7 +77,7 @@ layout: manual
   * [`helix`](kcl/std-helix)
   * [`hole`](kcl/hole)
   * [`hollow`](kcl/hollow)
-  * [`intersect`](kcl/intersect)
+  * [`inch`](kcl/inch)
   * [`lastSegX`](kcl/lastSegX)
   * [`lastSegY`](kcl/lastSegY)
   * [`legAngX`](kcl/legAngX)
@@ -89,9 +89,11 @@ layout: manual
   * [`log`](kcl/log)
   * [`log10`](kcl/log10)
   * [`log2`](kcl/log2)
+  * [`m`](kcl/m)
   * [`map`](kcl/map)
   * [`max`](kcl/max)
   * [`min`](kcl/min)
+  * [`mm`](kcl/mm)
   * [`offsetPlane`](kcl/offsetPlane)
   * [`patternCircular2d`](kcl/patternCircular2d)
   * [`patternCircular3d`](kcl/patternCircular3d)
@@ -99,6 +101,7 @@ layout: manual
   * [`patternLinear3d`](kcl/patternLinear3d)
   * [`patternTransform`](kcl/patternTransform)
   * [`patternTransform2d`](kcl/patternTransform2d)
+  * [`polar`](kcl/polar)
   * [`polygon`](kcl/polygon)
   * [`pop`](kcl/pop)
   * [`pow`](kcl/pow)
@@ -124,22 +127,22 @@ layout: manual
   * [`sqrt`](kcl/sqrt)
   * [`startProfileAt`](kcl/startProfileAt)
   * [`startSketchOn`](kcl/startSketchOn)
-  * [`subtract`](kcl/subtract)
   * [`sweep`](kcl/sweep)
   * [`tangentToEnd`](kcl/tangentToEnd)
   * [`tangentialArc`](kcl/tangentialArc)
+  * [`tangentialArcTo`](kcl/tangentialArcTo)
+  * [`tangentialArcToRelative`](kcl/tangentialArcToRelative)
   * [`toDegrees`](kcl/toDegrees)
   * [`toRadians`](kcl/toRadians)
   * [`translate`](kcl/translate)
-  * [`union`](kcl/union)
   * [`xLine`](kcl/xLine)
   * [`yLine`](kcl/yLine)
+  * [`yd`](kcl/yd)
 * **std::math**
   * [`E`](kcl/consts/std-math-E)
   * [`PI`](kcl/consts/std-math-PI)
   * [`TAU`](kcl/consts/std-math-TAU)
   * [`cos`](kcl/std-math-cos)
-  * [`polar`](kcl/std-math-polar)
   * [`sin`](kcl/std-math-sin)
   * [`tan`](kcl/std-math-tan)
 * **std::sketch**

docs/kcl/max.md

@@ -33,7 +33,10 @@ max(args: [number]): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 70, length = max(15, 31, 4, 13, 22))
+  |> angledLine({
+       angle = 70,
+       length = max(15, 31, 4, 13, 22)
+     }, %)
   |> line(end = [20, 0])
   |> close()
 

docs/kcl/min.md

@@ -33,7 +33,10 @@ min(args: [number]): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 70, length = min(15, 31, 4, 13, 22))
+  |> angledLine({
+       angle = 70,
+       length = min(15, 31, 4, 13, 22)
+     }, %)
   |> line(end = [20, 0])
   |> close()
 

docs/kcl/patternLinear3d.md

@@ -57,7 +57,7 @@ case = startSketchOn(XY)
   |> startProfileAt([-size, -size], %)
   |> line(end = [2 * size, 0])
   |> line(end = [0, 2 * size])
-  |> tangentialArc(endAbsolute = [-size, size])
+  |> tangentialArcTo([-size, size], %)
   |> close(%)
   |> extrude(length = 65)
 
@@ -88,7 +88,7 @@ case = startSketchOn(XY)
   |> startProfileAt([-size, -size], %)
   |> line(end = [2 * size, 0])
   |> line(end = [0, 2 * size])
-  |> tangentialArc(endAbsolute = [-size, size])
+  |> tangentialArcTo([-size, size], %)
   |> close(%)
   |> extrude(length = 65)
 

docs/kcl/pow.md

@@ -37,7 +37,7 @@ pow(
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 50, length = pow(5, 2))
+  |> angledLine({ angle = 50, length = pow(5, 2) }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/profileStart.md

@@ -29,8 +29,11 @@ profileStart(sketch: Sketch): [number]
 ```js
 sketch001 = startSketchOn(XY)
   |> startProfileAt([5, 2], %)
-  |> angledLine(angle = 120, length = 50, tag = $seg01)
-  |> angledLine(angle = segAng(seg01) + 120, length = 50)
+  |> angledLine({ angle = 120, length = 50 }, %, $seg01)
+  |> angledLine({
+       angle = segAng(seg01) + 120,
+       length = 50
+     }, %)
   |> line(end = profileStart(%))
   |> close()
   |> extrude(length = 20)

docs/kcl/reduce.md

@@ -78,7 +78,7 @@ assertEqual(sum, 6, 0.00001, "1 + 2 + 3 summed is 6")
 ```js
 // Declare a function that sketches a decagon.
 fn decagon(radius) {
-  // Each side of the decagon is turned this many radians from the previous angle.
+  // Each side of the decagon is turned this many degrees from the previous angle.
   stepAngle = 1 / 10 * TAU
 
   // Start the decagon sketch at this point.

docs/kcl/rotate.md

@@ -65,9 +65,9 @@ rotate(
 sweepPath = startSketchOn(XZ)
   |> startProfileAt([0.05, 0.05], %)
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90, radius = 5)
+  |> tangentialArc({ offset = 90, radius = 5 }, %)
   |> line(end = [-3, 0])
-  |> tangentialArc(angle = -90, radius = 5)
+  |> tangentialArc({ offset = -90, radius = 5 }, %)
   |> line(end = [0, 7])
 
 // Create a hole for the pipe.
@@ -90,9 +90,9 @@ sweepSketch = startSketchOn(XY)
 sweepPath = startSketchOn(XZ)
   |> startProfileAt([0.05, 0.05], %)
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90, radius = 5)
+  |> tangentialArc({ offset = 90, radius = 5 }, %)
   |> line(end = [-3, 0])
-  |> tangentialArc(angle = -90, radius = 5)
+  |> tangentialArc({ offset = -90, radius = 5 }, %)
   |> line(end = [0, 7])
 
 // Create a hole for the pipe.
@@ -115,9 +115,9 @@ sweepSketch = startSketchOn(XY)
 sweepPath = startSketchOn(XZ)
   |> startProfileAt([0.05, 0.05], %)
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90, radius = 5)
+  |> tangentialArc({ offset = 90, radius = 5 }, %)
   |> line(end = [-3, 0])
-  |> tangentialArc(angle = -90, radius = 5)
+  |> tangentialArc({ offset = -90, radius = 5 }, %)
   |> line(end = [0, 7])
 
 // Create a hole for the pipe.
@@ -151,9 +151,15 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
+  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       50.61
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
@@ -162,7 +168,7 @@ circleSketch = circle(sketch001, center = [200, -30.29], radius = 32.63)
 sketch002 = startSketchOn(YZ)
 sweepPath = startProfileAt([0, 0], sketch002)
   |> yLine(length = 231.81)
-  |> tangentialArc(radius = 80, angle = -90)
+  |> tangentialArc({ radius = 80, offset = -90 }, %)
   |> xLine(length = 384.93)
 
 parts = sweep([rectangleSketch, circleSketch], path = sweepPath)

docs/kcl/scale.md

@@ -49,9 +49,9 @@ scale(
 sweepPath = startSketchOn(XZ)
   |> startProfileAt([0.05, 0.05], %)
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90, radius = 5)
+  |> tangentialArc({ offset = 90, radius = 5 }, %)
   |> line(end = [-3, 0])
-  |> tangentialArc(angle = -90, radius = 5)
+  |> tangentialArc({ offset = -90, radius = 5 }, %)
   |> line(end = [0, 7])
 
 // Create a hole for the pipe.
@@ -85,9 +85,15 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
+  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       50.61
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
@@ -96,7 +102,7 @@ circleSketch = circle(sketch001, center = [200, -30.29], radius = 32.63)
 sketch002 = startSketchOn(YZ)
 sweepPath = startProfileAt([0, 0], sketch002)
   |> yLine(length = 231.81)
-  |> tangentialArc(radius = 80, angle = -90)
+  |> tangentialArc({ radius = 80, offset = -90 }, %)
   |> xLine(length = 384.93)
 
 parts = sweep([rectangleSketch, circleSketch], path = sweepPath)

docs/kcl/segAng.md

@@ -32,9 +32,9 @@ exampleSketch = startSketchOn(XZ)
   |> line(end = [10, 0])
   |> line(end = [5, 10], tag = $seg01)
   |> line(end = [-10, 0])
-  |> angledLine(angle = segAng(seg01), length = 10)
+  |> angledLine([segAng(seg01), 10], %)
   |> line(end = [-10, 0])
-  |> angledLine(angle = segAng(seg01), length = -15)
+  |> angledLine([segAng(seg01), -15], %)
   |> close()
 
 example = extrude(exampleSketch, length = 4)

docs/kcl/segLen.md

@@ -29,9 +29,9 @@ segLen(tag: TagIdentifier): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 60, length = 10, tag = $thing)
-  |> tangentialArc(angle = -120, radius = 5)
-  |> angledLine(angle = -60, length = segLen(thing))
+  |> angledLine({ angle = 60, length = 10 }, %, $thing)
+  |> tangentialArc({ offset = -120, radius = 5 }, %)
+  |> angledLine({ angle = -60, length = segLen(thing) }, %)
   |> close()
 
 example = extrude(exampleSketch, length = 5)

docs/kcl/settings.md

@@ -6,7 +6,7 @@ layout: manual
 
 # KCL Settings
 
-There are three levels of settings available in Zoo Design Studio:
+There are three levels of settings available in the KittyCAD Design Studiolication:
 
 1. [User Settings](/docs/kcl/settings/user): Global settings that apply to all projects, stored in `user.toml`
 2. [Project Settings](/docs/kcl/settings/project): Settings specific to a project, stored in `project.toml`
@@ -14,7 +14,7 @@ There are three levels of settings available in Zoo Design Studio:
 
 ## Configuration Files
 
-Zoo Design Studio uses TOML files for configuration:
+The KittyCAD Design Studio uses TOML files for configuration:
 
 * **User Settings**: `user.toml` - See [complete documentation](/docs/kcl/settings/user)
 * **Project Settings**: `project.toml` - See [complete documentation](/docs/kcl/settings/project)

docs/kcl/settings/user.md

@@ -96,7 +96,7 @@ Permanently dismiss the banner warning to download the desktop app. This setting
 
 ##### stream_idle_mode
 
-When the user is idle, teardown the stream after some time.
+When the user is idle, and this is true, the stream will be torn down.
 
 
 **Default:** None

docs/kcl/shell.md

@@ -103,7 +103,7 @@ case = startSketchOn(-XZ)
   |> startProfileAt([-size, -size], %)
   |> line(end = [2 * size, 0])
   |> line(end = [0, 2 * size])
-  |> tangentialArc(endAbsolute = [-size, size])
+  |> tangentialArcTo([-size, size], %)
   |> close()
   |> extrude(length = 65)
 
@@ -128,7 +128,7 @@ case = startSketchOn(XY)
   |> startProfileAt([-size, -size], %)
   |> line(end = [2 * size, 0])
   |> line(end = [0, 2 * size])
-  |> tangentialArc(endAbsolute = [-size, size])
+  |> tangentialArcTo([-size, size], %)
   |> close()
   |> extrude(length = 65)
 
@@ -156,7 +156,7 @@ case = startSketchOn(XY)
   |> startProfileAt([-size, -size], %)
   |> line(end = [2 * size, 0])
   |> line(end = [0, 2 * size])
-  |> tangentialArc(endAbsolute = [-size, size])
+  |> tangentialArcTo([-size, size], %)
   |> close()
   |> extrude(length = 65)
 

docs/kcl/sqrt.md

@@ -33,7 +33,7 @@ sqrt(num: number): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 50, length = sqrt(2500))
+  |> angledLine({ angle = 50, length = sqrt(2500) }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/std-helix.md

@@ -9,15 +9,7 @@ Create a helix.
 
 
 ```js
-helix(
-  revolutions: number(_),
-  angleStart: number(deg),
-  ccw?: bool,
-  radius?: number(mm),
-  axis?: Axis3d | Edge,
-  length?: number(mm),
-  cylinder?: Solid,
-): Helix
+helix(revolutions: number(_), angleStart: number(deg), ccw?: bool, radius?: number(mm), axis?: Axis3d | Edge, length?: number(mm), cylinder?: Solid): Helix
 ```
 
 

docs/kcl/std-math-cos.md

@@ -29,10 +29,10 @@ cos(@num: number(rad)): number(_)
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(
+  |> angledLine({
     angle = 30,
     length = 3 / cos(toRadians(30)),
-  )
+  }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/std-math-tan.md

@@ -29,10 +29,10 @@ tan(@num: number(rad)): number(_)
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(
+  |> angledLine({
     angle = 50,
     length = 50 * tan(1/2),
-  )
+  }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/std-sketch-circle.md

@@ -6,16 +6,10 @@ layout: manual
 
 
 
-Construct a 2-dimensional circle, of the specified radius, centered at
-the provided (x, y) origin point.
+Construct a 2-dimensional circle, of the specified radius, centered atthe provided (x, y) origin point.
 
 ```js
-circle(
-  @sketch_or_surface: Sketch | Plane | Face,
-  center: Point2d,
-  radius: number,
-  tag?: tag,
-): Sketch
+circle(@sketch_or_surface: Sketch | Plane | Face, center: Point2d, radius: number, tag?: tag): Sketch
 ```
 
 

docs/kcl/sweep.md

@@ -47,9 +47,9 @@ sweep(
 sweepPath = startSketchOn(XZ)
   |> startProfileAt([0.05, 0.05], %)
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90, radius = 5)
+  |> tangentialArc({ offset = 90, radius = 5 }, %)
   |> line(end = [-3, 0])
-  |> tangentialArc(angle = -90, radius = 5)
+  |> tangentialArc({ offset = -90, radius = 5 }, %)
   |> line(end = [0, 7])
 
 // Create a hole for the pipe.
@@ -91,9 +91,15 @@ springSketch = startSketchOn(YZ)
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
+  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       50.61
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
@@ -102,7 +108,7 @@ circleSketch = circle(sketch001, center = [200, -30.29], radius = 32.63)
 sketch002 = startSketchOn(YZ)
 sweepPath = startProfileAt([0, 0], sketch002)
   |> yLine(length = 231.81)
-  |> tangentialArc(radius = 80, angle = -90)
+  |> tangentialArc({ radius = 80, offset = -90 }, %)
   |> xLine(length = 384.93)
 
 sweep([rectangleSketch, circleSketch], path = sweepPath)
@@ -120,7 +126,7 @@ circleSketch = circle(sketch001, center = [200, -30.29], radius = 32.63)
 sketch002 = startSketchOn(YZ)
 sweepPath = startProfileAt([0, 0], sketch002)
   |> yLine(length = 231.81)
-  |> tangentialArc(radius = 80, angle = -90)
+  |> tangentialArc({ radius = 80, offset = -90 }, %)
   |> xLine(length = 384.93)
 
 sweep(circleSketch, path = sweepPath, sectional = true)

docs/kcl/tangentToEnd.md

@@ -31,9 +31,12 @@ tangentToEnd(tag: TagIdentifier): number
 pillSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [20, 0])
-  |> tangentialArc(end = [0, 10], tag = $arc1)
-  |> angledLine(angle = tangentToEnd(arc1), length = 20)
-  |> tangentialArc(end = [0, -10])
+  |> tangentialArcToRelative([0, 10], %, $arc1)
+  |> angledLine({
+       angle = tangentToEnd(arc1),
+       length = 20
+     }, %)
+  |> tangentialArcToRelative([0, -10], %)
   |> close()
 
 pillExtrude = extrude(pillSketch, length = 10)
@@ -46,9 +49,12 @@ pillExtrude = extrude(pillSketch, length = 10)
 pillSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [0, 20])
-  |> tangentialArc(endAbsolute = [10, 20], tag = $arc1)
-  |> angledLine(angle = tangentToEnd(arc1), length = 20)
-  |> tangentialArc(end = [-10, 0])
+  |> tangentialArcTo([10, 20], %, $arc1)
+  |> angledLine({
+       angle = tangentToEnd(arc1),
+       length = 20
+     }, %)
+  |> tangentialArcToRelative([-10, 0], %)
   |> close()
 
 pillExtrude = extrude(pillSketch, length = 10)
@@ -60,7 +66,10 @@ pillExtrude = extrude(pillSketch, length = 10)
 rectangleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> line(end = [10, 0], tag = $seg1)
-  |> angledLine(angle = tangentToEnd(seg1), length = 10)
+  |> angledLine({
+       angle = tangentToEnd(seg1),
+       length = 10
+     }, %)
   |> line(end = [0, 10])
   |> line(end = [-20, 0])
   |> close()
@@ -74,7 +83,7 @@ rectangleExtrude = extrude(rectangleSketch, length = 10)
 bottom = startSketchOn(XY)
   |> startProfileAt([0, 0], %)
   |> arcTo({ end = [10, 10], interior = [5, 1] }, %, $arc1)
-  |> angledLine(angle = tangentToEnd(arc1), length = 20)
+  |> angledLine([tangentToEnd(arc1), 20], %)
   |> close()
 ```
 
@@ -86,7 +95,7 @@ circSketch = startSketchOn(XY)
 
 triangleSketch = startSketchOn(XY)
   |> startProfileAt([-5, 0], %)
-  |> angledLine(angle = tangentToEnd(circ), length = 10)
+  |> angledLine([tangentToEnd(circ), 10], %)
   |> line(end = [-15, 0])
   |> close()
 ```

docs/kcl/tangentialArcTo.md

@@ -35,7 +35,7 @@ tangentialArcTo(
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 60, length = 10)
+  |> angledLine({ angle = 60, length = 10 }, %)
   |> tangentialArcTo([15, 15], %)
   |> line(end = [10, -15])
   |> close()

docs/kcl/tangentialArcToRelative.md

@@ -35,7 +35,7 @@ tangentialArcToRelative(
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 45, length = 10)
+  |> angledLine({ angle = 45, length = 10 }, %)
   |> tangentialArcToRelative([0, -10], %)
   |> line(end = [-10, 0])
   |> close()

docs/kcl/tau.md

@@ -30,7 +30,7 @@ tau(): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 50, length = 10 * tau())
+  |> angledLine({ angle = 50, length = 10 * tau() }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/toDegrees.md

@@ -33,7 +33,10 @@ toDegrees(num: number): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 50, length = 70 * cos(toDegrees(pi() / 4)))
+  |> angledLine({
+       angle = 50,
+       length = 70 * cos(toDegrees(pi() / 4))
+     }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/toRadians.md

@@ -33,7 +33,10 @@ toRadians(num: number): number
 ```js
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 50, length = 70 * cos(toRadians(45)))
+  |> angledLine({
+       angle = 50,
+       length = 70 * cos(toRadians(45))
+     }, %)
   |> yLine(endAbsolute = 0)
   |> close()
 

docs/kcl/translate.md

@@ -45,9 +45,9 @@ translate(
 sweepPath = startSketchOn(XZ)
   |> startProfileAt([0.05, 0.05], %)
   |> line(end = [0, 7])
-  |> tangentialArc(angle = 90, radius = 5)
+  |> tangentialArc({ offset = 90, radius = 5 }, %)
   |> line(end = [-3, 0])
-  |> tangentialArc(angle = -90, radius = 5)
+  |> tangentialArc({ offset = -90, radius = 5 }, %)
   |> line(end = [0, 7])
 
 // Create a hole for the pipe.
@@ -86,9 +86,15 @@ cube
 
 sketch001 = startSketchOn(XY)
 rectangleSketch = startProfileAt([-200, 23.86], sketch001)
-  |> angledLine(angle = 0, length = 73.47, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 50.61)
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
+  |> angledLine([0, 73.47], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       50.61
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 
@@ -97,7 +103,7 @@ circleSketch = circle(sketch001, center = [200, -30.29], radius = 32.63)
 sketch002 = startSketchOn(YZ)
 sweepPath = startProfileAt([0, 0], sketch002)
   |> yLine(length = 231.81)
-  |> tangentialArc(radius = 80, angle = -90)
+  |> tangentialArc({ radius = 80, offset = -90 }, %)
   |> xLine(length = 384.93)
 
 parts = sweep([rectangleSketch, circleSketch], path = sweepPath)

docs/kcl/types.md

@@ -184,17 +184,15 @@ way:
 ```norun
 startSketchOn('XZ')
   |> startProfileAt(origin, %)
-  |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
-  |> angledLine(
+  |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
+  |> angledLine({
        angle = segAng(rectangleSegmentA001) - 90,
        length = 196.99,
-       tag = $rectangleSegmentB001,
-     )
-  |> angledLine(
+     }, %, $rectangleSegmentB001)
+  |> angledLine({
        angle = segAng(rectangleSegmentA001),
        length = -segLen(rectangleSegmentA001),
-       tag = $rectangleSegmentC001,
-     )
+     }, %, $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 ```
@@ -219,17 +217,15 @@ However if the code was written like this:
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
-    |> angledLine(
+    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
+    |> angledLine({
          angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99,
-         tag = $rectangleSegmentB001,
-       )
-    |> angledLine(
+         length = 196.99
+       }, %, $rectangleSegmentB001)
+    |> angledLine({
          angle = segAng(rectangleSegmentA001),
          length = -segLen(rectangleSegmentA001)
-         tag = $rectangleSegmentC001,
-       )
+       }, %, $rectangleSegmentC001)
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }
@@ -249,17 +245,15 @@ For example the following code works.
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
-    |> angledLine(
+    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
+    |> angledLine({
          angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99,
-         tag = $rectangleSegmentB001,
-       )
-    |> angledLine(
+         length = 196.99
+       }, %, $rectangleSegmentB001)
+    |> angledLine({
          angle = segAng(rectangleSegmentA001),
          length = -segLen(rectangleSegmentA001)
-         tag = $rectangleSegmentC001,
-       )
+       }, %, $rectangleSegmentC001)
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }

docs/kcl/types/KclValue.md

@@ -252,7 +252,7 @@ Data for an imported geometry.
 
 | Property | Type | Description | Required |
 |----------|------|-------------|----------|
-| `type` |enum: `ImportedGeometry`|  | No |
+| `type` |enum: [`ImportedGeometry`](/docs/kcl/types/ImportedGeometry)|  | No |
 | `id` |[`string`](/docs/kcl/types/string)| The ID of the imported geometry. | No |
 | `value` |`[` [`string`](/docs/kcl/types/string) `]`| The original file paths. | No |
 

docs/kcl/types/PolarCoordsData.md

@@ -0,0 +1,22 @@
+---
+title: "PolarCoordsData"
+excerpt: "Data for polar coordinates."
+layout: manual
+---
+
+Data for polar coordinates.
+
+**Type:** `object`
+
+
+
+
+
+## Properties
+
+| Property | Type | Description | Required |
+|----------|------|-------------|----------|
+| `angle` |[`number`](/docs/kcl/types/number)| The angle of the line (in degrees). | No |
+| `length` |[`number`](/docs/kcl/types/number)| The length of the line. | No |
+
+

docs/kcl/types/tag.md

@@ -14,17 +14,15 @@ way:
 ```js
 startSketchOn('XZ')
   |> startProfileAt(origin, %)
-  |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
-  |> angledLine(
+  |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
+  |> angledLine({
        angle = segAng(rectangleSegmentA001) - 90,
        length = 196.99,
-       tag = $rectangleSegmentB001,
-     )
-  |> angledLine(
+     }, %, $rectangleSegmentB001)
+  |> angledLine({
        angle = segAng(rectangleSegmentA001),
        length = -segLen(rectangleSegmentA001),
-       tag = $rectangleSegmentC001,
-     )
+     }, %, $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 ```
@@ -48,16 +46,15 @@ However if the code was written like this:
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
-    |> angledLine(
+    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
+    |> angledLine({
          angle = segAng(rectangleSegmentA001) - 90,
-         length = 196.99,
-         tag = $rectangleSegmentB001)
-    |> angledLine(
+         length = 196.99
+       }, %, $rectangleSegmentB001)
+    |> angledLine({
          angle = segAng(rectangleSegmentA001),
-         length = -segLen(rectangleSegmentA001),
-         tag = $rectangleSegmentC001
-       )
+         length = -segLen(rectangleSegmentA001)
+       }, %, $rectangleSegmentC001)
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }
@@ -77,15 +74,15 @@ For example the following code works.
 fn rect(origin) {
   return startSketchOn('XZ')
     |> startProfileAt(origin, %)
-    |> angledLine(angle = 0, length = 191.26, tag = $rectangleSegmentA001)
-    |> angledLine(
+    |> angledLine({angle = 0, length = 191.26}, %, $rectangleSegmentA001)
+    |> angledLine({
          angle = segAng(rectangleSegmentA001) - 90,
          length = 196.99
-       , %, $rectangleSegmentB001)
-    |> angledLine(
+       }, %, $rectangleSegmentB001)
+    |> angledLine({
          angle = segAng(rectangleSegmentA001),
          length = -segLen(rectangleSegmentA001)
-       , %, $rectangleSegmentC001)
+       }, %, $rectangleSegmentC001)
     |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
     |> close()
 }

docs/kcl/xLine.md

@@ -38,10 +38,10 @@ xLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> xLine(length = 15)
-  |> angledLine(angle = 80, length = 15)
+  |> angledLine({ angle = 80, length = 15 }, %)
   |> line(end = [8, -10])
   |> xLine(length = 10)
-  |> angledLine(angle = 120, length = 30)
+  |> angledLine({ angle = 120, length = 30 }, %)
   |> xLine(length = -15)
   |> close()
 

docs/kcl/yLine.md

@@ -38,7 +38,7 @@ yLine(
 exampleSketch = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
   |> yLine(length = 15)
-  |> angledLine(angle = 30, length = 15)
+  |> angledLine({ angle = 30, length = 15 }, %)
   |> line(end = [8, -10])
   |> yLine(length = -5)
   |> close()

e2e/playwright/basic-sketch.spec.ts

@@ -137,7 +137,7 @@ async function doBasicSketch(
     await page.waitForTimeout(100)
   }
 
-  await page.getByRole('button', { name: 'constraints: open menu' }).click()
+  await page.getByRole('button', { name: 'Length: open menu' }).click()
   await page.getByRole('button', { name: 'Equal Length' }).click()
 
   // Open the code pane.

e2e/playwright/boolean.spec.ts

@@ -38,7 +38,7 @@ test.describe('Point and click for boolean workflows', () => {
         path.resolve(
           __dirname,
           '../../',
-          './rust/kcl-lib/e2e/executor/inputs/boolean-setup-with-sketch-on-faces.kcl'
+          './rust/kcl-lib/e2e/executor/inputs/boolean-setup-with'
         ),
         'utf-8'
       )

e2e/playwright/desktop-export.spec.ts

@@ -32,41 +32,54 @@ test(
     })
     await page.setBodyDimensions({ width: 1200, height: 500 })
 
-    await test.step('on open of project', async () => {
-      // Open the project
-      const projectName = page.getByText(`bracket`)
-      await expect(projectName).toBeVisible()
-      await projectName.click()
-      await scene.settled(cmdBar)
+    page.on('console', console.log)
 
-      // Expect zero errors in gutter
+    await test.step('on open of project', async () => {
+      await expect(page.getByText(`bracket`)).toBeVisible()
+
+      // open the project
+      await page.getByText(`bracket`).click()
+
+      // expect zero errors in guter
       await expect(page.locator('.cm-lint-marker-error')).not.toBeVisible()
 
-      // Click the export button
+      // export the model
       const exportButton = page.getByTestId('export-pane-button')
       await expect(exportButton).toBeVisible()
+
+      // Wait for the model to finish loading
+      await scene.settled(cmdBar)
+
+      const gltfOption = page.getByText('glTF')
+      const submitButton = page.getByText('Confirm Export')
+      const exportingToastMessage = page.getByText(`Exporting...`)
+      const errorToastMessage = page.getByText(`Error while exporting`)
+      const engineErrorToastMessage = page.getByText(`Nothing to export`)
+      const alreadyExportingToastMessage = page.getByText(`Already exporting`)
+      // The open file's name is `main.kcl`, so the export file name should be `main.gltf`
+      const exportFileName = `main.gltf`
+
+      // Click the export button
       await exportButton.click()
 
-      // Select the first format option
-      const gltfOption = cmdBar.selectOption({ name: 'glTF' })
-      const exportFileName = `main.gltf` // source file is named `main.kcl`
       await expect(gltfOption).toBeVisible()
+      await expect(page.getByText('STL')).toBeVisible()
+
       await page.keyboard.press('Enter')
 
       // Click the checkbox
-      const submitButton = page.getByText('Confirm Export')
       await expect(submitButton).toBeVisible()
+
+      await page.waitForTimeout(500)
+
       await page.keyboard.press('Enter')
 
+      // Find the toast.
       // Look out for the toast message
-      const exportingToastMessage = page.getByText(`Exporting...`)
-      const alreadyExportingToastMessage = page.getByText(`Already exporting`)
       await expect(exportingToastMessage).toBeVisible()
       await expect(alreadyExportingToastMessage).not.toBeVisible()
 
-      // Expect it to succeed
-      const errorToastMessage = page.getByText(`Error while exporting`)
-      const engineErrorToastMessage = page.getByText(`Nothing to export`)
+      // Expect it to succeed.
       await expect(errorToastMessage).not.toBeVisible()
       await expect(engineErrorToastMessage).not.toBeVisible()
 
@@ -74,7 +87,6 @@ test(
       await expect(successToastMessage).toBeVisible()
       await expect(exportingToastMessage).not.toBeVisible()
 
-      // Check for the exported file
       const firstFileFullPath = path.resolve(
         getPlaywrightDownloadDir(tronApp.projectDirName),
         exportFileName
@@ -101,50 +113,59 @@ test(
       const u = await getUtils(page)
       await u.openFilePanel()
 
-      // Click on the other file
       const otherKclButton = page.getByRole('button', { name: 'other.kcl' })
+
+      // Click the file
       await otherKclButton.click()
 
       // Close the file pane
       await u.closeFilePanel()
+
       await scene.settled(cmdBar)
 
-      // Expect zero errors in gutter
+      // expect zero errors in guter
       await expect(page.locator('.cm-lint-marker-error')).not.toBeVisible()
 
-      // Click the export button
+      // export the model
       const exportButton = page.getByTestId('export-pane-button')
       await expect(exportButton).toBeVisible()
+
+      const gltfOption = page.getByText('glTF')
+      const submitButton = page.getByText('Confirm Export')
+      const exportingToastMessage = page.getByText(`Exporting...`)
+      const errorToastMessage = page.getByText(`Error while exporting`)
+      const engineErrorToastMessage = page.getByText(`Nothing to export`)
+      const alreadyExportingToastMessage = page.getByText(`Already exporting`)
+      // The open file's name is `other.kcl`, so the export file name should be `other.gltf`
+      const exportFileName = `other.gltf`
+
+      // Click the export button
       await exportButton.click()
 
-      // Select the first format option
-      const gltfOption = cmdBar.selectOption({ name: 'glTF' })
-      const exportFileName = `other.gltf` // source file is named `other.kcl`
       await expect(gltfOption).toBeVisible()
+      await expect(page.getByText('STL')).toBeVisible()
+
       await page.keyboard.press('Enter')
 
       // Click the checkbox
-      const submitButton = page.getByText('Confirm Export')
       await expect(submitButton).toBeVisible()
+
       await page.keyboard.press('Enter')
 
+      // Find the toast.
       // Look out for the toast message
-      const exportingToastMessage = page.getByText(`Exporting...`)
-      const alreadyExportingToastMessage = page.getByText(`Already exporting`)
       await expect(exportingToastMessage).toBeVisible()
-      await expect(alreadyExportingToastMessage).not.toBeVisible()
-
-      // Expect it to succeed
-      const errorToastMessage = page.getByText(`Error while exporting`)
-      const engineErrorToastMessage = page.getByText(`Nothing to export`)
-      await expect(errorToastMessage).not.toBeVisible()
-      await expect(engineErrorToastMessage).not.toBeVisible()
 
       const successToastMessage = page.getByText(`Exported successfully`)
-      await expect(successToastMessage).toBeVisible()
-      await expect(exportingToastMessage).not.toBeVisible()
+      await test.step('Check the success toast message shows and nothing else', async () =>
+        Promise.all([
+          expect(alreadyExportingToastMessage).not.toBeVisible(),
+          expect(errorToastMessage).not.toBeVisible(),
+          expect(engineErrorToastMessage).not.toBeVisible(),
+          expect(successToastMessage).toBeVisible(),
+          expect(exportingToastMessage).not.toBeVisible(),
+        ]))
 
-      // Check for the exported file=
       const secondFileFullPath = path.resolve(
         getPlaywrightDownloadDir(tronApp.projectDirName),
         exportFileName

e2e/playwright/editor-tests.spec.ts

@@ -920,7 +920,7 @@ sketch001 = startSketchOn(XZ)
         `sketch001 = startSketchOn(XZ)
   |> startProfileAt([4.61, -14.01], %)
   |> line(end = [12.73, -0.09])
-  |> tangentialArc(endAbsolute = [24.95, -5.38])
+  |> tangentialArcTo([24.95, -5.38], %)
   |> close()`
       )
     })
@@ -969,7 +969,7 @@ sketch001 = startSketchOn(XZ)
 
     // expect the code to have changed
     await expect(page.locator('.cm-content')).toHaveText(
-      `sketch001 = startSketchOn(XZ)  |> startProfileAt([4.61, -14.01], %)  |> line(end = [12.73, -0.09])  |> tangentialArc(endAbsolute = [24.95, -5.38])  |> close()extrude001 = extrude(sketch001, length = 5)`
+      `sketch001 = startSketchOn(XZ)  |> startProfileAt([4.61, -14.01], %)  |> line(end = [12.73, -0.09])  |> tangentialArcTo([24.95, -5.38], %)  |> close()extrude001 = extrude(sketch001, length = 5)`
     )
 
     // Now hit undo
@@ -982,7 +982,7 @@ sketch001 = startSketchOn(XZ)
       .toHaveText(`sketch001 = startSketchOn(XZ)
   |> startProfileAt([4.61, -14.01], %)
   |> line(end = [12.73, -0.09])
-  |> tangentialArc(endAbsolute = [24.95, -5.38])
+  |> tangentialArcTo([24.95, -5.38], %)
   |> close()`)
   })
 
@@ -998,7 +998,7 @@ sketch001 = startSketchOn(XZ)
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([4.61, -10.01], %)
   |> line(end = [12.73, -0.09])
-  |> tangentialArc(endAbsolute = [24.95, -0.38])
+  |> tangentialArcTo([24.95, -0.38], %)
   |> close()
   |> extrude(length = 5)`
         )
@@ -1072,7 +1072,7 @@ sketch001 = startSketchOn(XZ)
       // we wait so it saves the code
       await page.waitForTimeout(800)
 
-      // drag tangentialArc handle
+      // drag tangentialArcTo handle
       const tangentEnd = await u.getBoundingBox('[data-overlay-index="1"]')
       await page.dragAndDrop('#stream', '#stream', {
         sourcePosition: { x: tangentEnd.x + 10, y: tangentEnd.y - 5 },
@@ -1089,7 +1089,7 @@ sketch001 = startSketchOn(XZ)
         `sketch001 = startSketchOn(XZ)
     |> startProfileAt([2.71, -2.71], %)
     |> line(end = [15.4, -2.78])
-    |> tangentialArc(endAbsolute = [27.6, -3.05])
+    |> tangentialArcTo([27.6, -3.05], %)
     |> close()
     |> extrude(length = 5)`,
         { shouldNormalise: true }
@@ -1104,7 +1104,7 @@ sketch001 = startSketchOn(XZ)
         `sketch001 = startSketchOn(XZ)
     |> startProfileAt([2.71, -2.71], %)
     |> line(end = [15.4, -2.78])
-    |> tangentialArc(endAbsolute = [24.95, -0.38])
+    |> tangentialArcTo([24.95, -0.38], %)
     |> close()
     |> extrude(length = 5)`,
         { shouldNormalise: true }
@@ -1119,7 +1119,7 @@ sketch001 = startSketchOn(XZ)
         `sketch001 = startSketchOn(XZ)
     |> startProfileAt([2.71, -2.71], %)
     |> line(end = [12.73, -0.09])
-    |> tangentialArc(endAbsolute = [24.95, -0.38])
+    |> tangentialArcTo([24.95, -0.38], %)
     |> close()
     |> extrude(length = 5)`,
         { shouldNormalise: true }
@@ -1135,7 +1135,7 @@ sketch001 = startSketchOn(XZ)
         `sketch001 = startSketchOn(XZ)
     |> startProfileAt([4.61, -10.01], %)
     |> line(end = [12.73, -0.09])
-    |> tangentialArc(endAbsolute = [24.95, -0.38])
+    |> tangentialArcTo([24.95, -0.38], %)
     |> close()
     |> extrude(length = 5)`,
         { shouldNormalise: true }
@@ -1144,7 +1144,7 @@ sketch001 = startSketchOn(XZ)
   )
 
   test(
-    `Can import a local OBJ file`,
+    `Can use the import stdlib function on a local OBJ file`,
     { tag: '@electron' },
     async ({ page, context }, testInfo) => {
       test.fixme(orRunWhenFullSuiteEnabled())
@@ -1194,7 +1194,7 @@ sketch001 = startSketchOn(XZ)
           .toBeLessThan(15)
       })
       await test.step(`Write the import function line`, async () => {
-        await u.codeLocator.fill(`import 'cube.obj'\ncube`)
+        await u.codeLocator.fill(`import('cube.obj')`)
         await page.waitForTimeout(800)
       })
       await test.step(`Reset the camera before checking`, async () => {
@@ -1319,85 +1319,4 @@ sketch001 = startSketchOn(XZ)
     const element = page.locator('[data-overlay-index="1"]')
     await expect(element).toHaveAttribute('data-overlay-visible', 'true')
   })
-
-  test(`Only show axis planes when there are no errors`, async ({
-    page,
-    homePage,
-    scene,
-    cmdBar,
-  }) => {
-    await page.addInitScript(async () => {
-      localStorage.setItem(
-        'persistCode',
-        `sketch001 = startSketchOn(XZ)
-    profile001 = circle(sketch001, center = [-100.0, -100.0], radius = 50.0)
-
-    sketch002 = startSketchOn(XZ)
-    profile002 = circle(sketch002, center = [-100.0, 100.0], radius = 50.0)
-    extrude001 = extrude(profile002, length = 0)` // length = 0 is causing the error
-      )
-    })
-
-    const viewportSize = { width: 1200, height: 800 }
-    await page.setBodyDimensions(viewportSize)
-
-    await homePage.goToModelingScene()
-
-    await scene.connectionEstablished()
-    await scene.settled(cmdBar)
-
-    await scene.expectPixelColor(
-      TEST_COLORS.DARK_MODE_BKGD,
-      // This is a position where the blue part of the axis plane is visible if its rendered
-      { x: viewportSize.width * 0.75, y: viewportSize.height * 0.2 },
-      15
-    )
-  })
-
-  test(`test-toolbar-buttons`, async ({
-    page,
-    homePage,
-    toolbar,
-    scene,
-    cmdBar,
-  }) => {
-    await test.step('Load an empty file', async () => {
-      await page.addInitScript(async () => {
-        localStorage.setItem('persistCode', '')
-      })
-      await page.setBodyDimensions({ width: 1200, height: 500 })
-      await homePage.goToModelingScene()
-
-      // wait until scene is ready to be interacted with
-      await scene.connectionEstablished()
-      await scene.settled(cmdBar)
-    })
-
-    await test.step('Test toolbar button correct selection', async () => {
-      await toolbar.expectToolbarMode.toBe('modeling')
-
-      await toolbar.startSketchPlaneSelection()
-
-      // Click on a default plane
-      await page.mouse.click(700, 200)
-
-      // tools cannot be selected immediately, couldn't find an event to await instead.
-      await page.waitForTimeout(1000)
-
-      await toolbar.selectCenterRectangle()
-
-      await expect(page.getByTestId('center-rectangle')).toHaveAttribute(
-        'aria-pressed',
-        'true'
-      )
-    })
-
-    await test.step('Test Toolbar dropdown remembering last selection', async () => {
-      // Select another tool
-      await page.getByTestId('circle-center').click()
-
-      // center-rectangle should still be the active option in the rectangle dropdown
-      await expect(page.getByTestId('center-rectangle')).toBeVisible()
-    })
-  })
 })

e2e/playwright/feature-tree-pane.spec.ts

@@ -19,7 +19,7 @@ length001 = timesFive(1) * 5
 sketch001 = startSketchOn(XZ)
   |> startProfileAt([20, 10], %)
   |> line(end = [10, 10])
-  |> angledLine(angle = -45, length = length001)
+  |> angledLine([-45, length001], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 revolve001 = revolve(sketch001, axis = X)
@@ -38,9 +38,15 @@ extrude001 = extrude(sketch002, length = 10)
 
 const FEATURE_TREE_SKETCH_CODE = `sketch001 = startSketchOn(XZ)
   |> startProfileAt([0, 0], %)
-  |> angledLine(angle = 0, length = 4, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 2, tag = $rectangleSegmentB001)
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $rectangleSegmentC001)
+  |> angledLine([0, 4], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       2
+     ], %, $rectangleSegmentB001)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %, $rectangleSegmentC001)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close(%)
 extrude001 = extrude(sketch001, length = 10)

e2e/playwright/fixtures/fixtureSetup.ts

@@ -154,6 +154,7 @@ export class ElectronZoo {
     if (!this.electron) {
       this.electron = await electron.launch(options)
 
+      this.page = await this.electron.firstWindow()
       // Mac takes quite a long time to create the first window in CI.
       // Turns out we can't trust firstWindow() either. So loop.
       let timeoutId: ReturnType<typeof setTimeout>

e2e/playwright/fixtures/homePageFixture.ts

@@ -99,6 +99,7 @@ export class HomePageFixture {
   createAndGoToProject = async (projectTitle = 'untitled') => {
     await this.projectsLoaded()
     await this.projectButtonNew.click()
+    await this.projectTextName.click()
     await this.projectTextName.fill(projectTitle)
     await this.projectButtonContinue.click()
   }

e2e/playwright/fixtures/sceneFixture.ts

@@ -49,9 +49,7 @@ export class SceneFixture {
   constructor(page: Page) {
     this.page = page
     this.streamWrapper = page.getByTestId('stream')
-    this.networkToggleConnected = page
-      .getByTestId('network-toggle-ok')
-      .or(page.getByTestId('network-toggle-other'))
+    this.networkToggleConnected = page.getByTestId('network-toggle-ok')
     this.startEditSketchBtn = page
       .getByRole('button', { name: 'Start Sketch' })
       .or(page.getByRole('button', { name: 'Edit Sketch' }))
@@ -233,7 +231,7 @@ export class SceneFixture {
   settled = async (cmdBar: CmdBarFixture) => {
     const u = await getUtils(this.page)
 
-    await expect(this.startEditSketchBtn).not.toBeDisabled({ timeout: 15_000 })
+    await expect(this.startEditSketchBtn).not.toBeDisabled()
     await expect(this.startEditSketchBtn).toBeVisible()
 
     await cmdBar.openCmdBar()

e2e/playwright/fixtures/toolbarFixture.ts

@@ -44,7 +44,6 @@ export class ToolbarFixture {
   featureTreePane!: Locator
   gizmo!: Locator
   gizmoDisabled!: Locator
-  insertButton!: Locator
 
   constructor(page: Page) {
     this.page = page
@@ -79,8 +78,6 @@ export class ToolbarFixture {
     // element or two different elements can represent these states.
     this.gizmo = page.getByTestId('gizmo')
     this.gizmoDisabled = page.getByTestId('gizmo-disabled')
-
-    this.insertButton = page.getByTestId('insert-pane-button')
   }
 
   get logoLink() {
@@ -169,7 +166,7 @@ export class ToolbarFixture {
   }
   selectCenterRectangle = async () => {
     await this.page
-      .getByRole('button', { name: 'caret down rectangles:' })
+      .getByRole('button', { name: 'caret down Corner rectangle:' })
       .click()
     await expect(
       this.page.getByTestId('dropdown-center-rectangle')
@@ -178,7 +175,7 @@ export class ToolbarFixture {
   }
   selectBoolean = async (operation: 'union' | 'subtract' | 'intersect') => {
     await this.page
-      .getByRole('button', { name: 'caret down booleans: open menu' })
+      .getByRole('button', { name: 'caret down Union: open menu' })
       .click()
     const operationTestId = `dropdown-boolean-${operation}`
     await expect(this.page.getByTestId(operationTestId)).toBeVisible()
@@ -186,19 +183,25 @@ export class ToolbarFixture {
   }
 
   selectCircleThreePoint = async () => {
-    await this.page.getByRole('button', { name: 'caret down circles:' }).click()
+    await this.page
+      .getByRole('button', { name: 'caret down Center circle:' })
+      .click()
     await expect(
       this.page.getByTestId('dropdown-circle-three-points')
     ).toBeVisible()
     await this.page.getByTestId('dropdown-circle-three-points').click()
   }
   selectArc = async () => {
-    await this.page.getByRole('button', { name: 'caret down arcs:' }).click()
+    await this.page
+      .getByRole('button', { name: 'caret down Tangential Arc:' })
+      .click()
     await expect(this.page.getByTestId('dropdown-arc')).toBeVisible()
     await this.page.getByTestId('dropdown-arc').click()
   }
   selectThreePointArc = async () => {
-    await this.page.getByRole('button', { name: 'caret down arcs:' }).click()
+    await this.page
+      .getByRole('button', { name: 'caret down Tangential Arc:' })
+      .click()
     await expect(
       this.page.getByTestId('dropdown-three-point-arc')
     ).toBeVisible()

e2e/playwright/import-ui.spec.ts

@@ -21,9 +21,15 @@ test.describe('Import UI tests', () => {
         path.join(projectDir, 'toBeImported.kcl'),
         `sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([281.54, 305.81], sketch001)
-  |> angledLine(angle = 0, length = 123.43, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 85.99)
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001))
+  |> angledLine([0, 123.43], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       85.99
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
 extrude(profile001, length = 100)`
@@ -38,9 +44,15 @@ importedCube
 
 sketch001 = startSketchOn(XZ)
 profile001 = startProfileAt([-134.53, -56.17], sketch001)
-  |> angledLine(angle = 0, length = 79.05, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = 76.28)
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $seg01)
+  |> angledLine([0, 79.05], %, $rectangleSegmentA001)
+  |> angledLine([
+       segAng(rectangleSegmentA001) - 90,
+       76.28
+     ], %)
+  |> angledLine([
+       segAng(rectangleSegmentA001),
+       -segLen(rectangleSegmentA001)
+     ], %, $seg01)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg02)
   |> close()
 extrude001 = extrude(profile001, length = 100)

e2e/playwright/lib/api-reporter.ts

@@ -1,63 +0,0 @@
-import type { Reporter, TestCase, TestResult } from '@playwright/test/reporter'
-
-class MyAPIReporter implements Reporter {
-  onTestEnd(test: TestCase, result: TestResult): void {
-    if (!process.env.TAB_API_URL || !process.env.TAB_API_KEY) {
-      return
-    }
-
-    const payload = {
-      // Required information
-      project: 'https://github.com/KittyCAD/modeling-app',
-      branch: process.env.GITHUB_HEAD_REF || process.env.GITHUB_REF_NAME || '',
-      commit: process.env.CI_COMMIT_SHA || process.env.GITHUB_SHA || '',
-      test: test.titlePath().slice(2).join(' › '),
-      status: result.status,
-      // Optional information
-      duration: result.duration / 1000,
-      message: result.error?.stack,
-      target: process.env.TARGET || null,
-      platform: process.env.RUNNER_OS || process.platform,
-      // Extra test and result data
-      annotations: test.annotations.map((a) => a.type),
-      retries: result.retry,
-      // Extra environment variables
-      CI_COMMIT_SHA: process.env.CI_COMMIT_SHA || null,
-      CI_PR_NUMBER: process.env.CI_PR_NUMBER || null,
-      GITHUB_BASE_REF: process.env.GITHUB_BASE_REF || null,
-      GITHUB_EVENT_NAME: process.env.GITHUB_EVENT_NAME || null,
-      GITHUB_HEAD_REF: process.env.GITHUB_HEAD_REF || null,
-      GITHUB_REF_NAME: process.env.GITHUB_REF_NAME || null,
-      GITHUB_REF: process.env.GITHUB_REF || null,
-      GITHUB_SHA: process.env.GITHUB_SHA || null,
-      GITHUB_WORKFLOW: process.env.GITHUB_WORKFLOW || null,
-      RUNNER_ARCH: process.env.RUNNER_ARCH || null,
-    }
-
-    void (async () => {
-      try {
-        const response = await fetch(`${process.env.TAB_API_URL}/api/results`, {
-          method: 'POST',
-          headers: new Headers({
-            'Content-Type': 'application/json',
-            'X-API-Key': process.env.TAB_API_KEY || '',
-          }),
-          body: JSON.stringify(payload),
-        })
-
-        if (!response.ok && !process.env.CI) {
-          console.error(
-            'TAB API - Failed to send test result:',
-            await response.text()
-          )
-        }
-      } catch {
-        if (!process.env.CI) {
-          console.error('TAB API - Unable to send test result')
-        }
-      }
-    })()
-  }
-}
-
-export default MyAPIReporter

e2e/playwright/named-views.spec.ts

@@ -6,9 +6,7 @@ import type { NamedView } from '@rust/kcl-lib/bindings/NamedView'
 
 import {
   createProject,
-  orRunWhenFullSuiteEnabled,
-  perProjectSettingsToToml,
-  runningOnMac,
+  perProjectsettingsToToml,
   tomlToPerProjectSettings,
 } from '@e2e/playwright/test-utils'
 import { expect, test } from '@e2e/playwright/zoo-test'
@@ -59,13 +57,10 @@ function tomlStringOverWriteNamedViewUuids(toml: string): string {
       settings.settings.app.named_views = remappedNamedViews
     }
   }
-  return perProjectSettingsToToml(settings)
+  return perProjectsettingsToToml(settings)
 }
 
 test.describe('Named view tests', () => {
-  if (runningOnMac()) {
-    test.fixme(orRunWhenFullSuiteEnabled())
-  }
   test('Verify project.toml is not created', async ({ page }, testInfo) => {
     // Create project and load it
     const projectName = 'named-views'
@@ -109,9 +104,6 @@ test.describe('Named view tests', () => {
       PROJECT_SETTINGS_FILE_NAME
     )
 
-    const toastMessage = page.getByText('Named view uuid1 created.')
-    await expect(toastMessage).toBeInViewport()
-
     // Expect project.toml to be generated on disk since a named view was created
     await expect(async () => {
       let exists = await fileExists(tempProjectSettingsFilePath)
@@ -137,6 +129,7 @@ test.describe('Named view tests', () => {
   }, testInfo) => {
     const projectName = 'named-views'
     const myNamedView1 = 'uuid1'
+    const myNamedView2 = 'uuid2'
 
     // Create project and go into the project
     await createProject({ name: projectName, page })
@@ -148,9 +141,6 @@ test.describe('Named view tests', () => {
     await cmdBar.argumentInput.fill(myNamedView1)
     await cmdBar.progressCmdBar(false)
 
-    let toastMessage = page.getByText('Named view uuid1 created.')
-    await expect(toastMessage).toBeInViewport()
-
     // Generate file paths for project.toml
     const projectDirName = testInfo.outputPath('electron-test-projects-dir')
     const tempProjectSettingsFilePath = join(
@@ -179,20 +169,17 @@ test.describe('Named view tests', () => {
     // Delete a named view
     await cmdBar.openCmdBar()
     await cmdBar.chooseCommand('delete named view')
-    cmdBar.selectOption({ name: myNamedView1 })
+    cmdBar.selectOption({ name: myNamedView2 })
     await cmdBar.progressCmdBar(false)
 
-    toastMessage = page.getByText('Named view uuid1 removed.')
-    await expect(toastMessage).toBeInViewport()
-
     await expect(async () => {
       // Read project.toml into memory again since we deleted a named view
       let tomlString = await fsp.readFile(tempProjectSettingsFilePath, 'utf-8')
       // Rewrite the uuids in the named views to match snapshot otherwise they will be randomly generated from rust and break
       tomlString = tomlStringOverWriteNamedViewUuids(tomlString)
 
-      // Write the entire tomlString to a snapshot.
-      // There are many key/value pairs to check this is a safer match.
+      // // Write the entire tomlString to a snapshot.
+      // // There are many key/value pairs to check this is a safer match.
       expect(tomlString).toMatchSnapshot('verify-named-view-gets-deleted')
     }).toPass()
   })
@@ -214,9 +201,6 @@ test.describe('Named view tests', () => {
     await cmdBar.argumentInput.fill(myNamedView)
     await cmdBar.progressCmdBar(false)
 
-    let toastMessage = page.getByText('Named view uuid1 created.')
-    await expect(toastMessage).toBeInViewport()
-
     // Generate file paths for project.toml
     const projectDirName = testInfo.outputPath('electron-test-projects-dir')
     const tempProjectSettingsFilePath = join(
@@ -273,19 +257,26 @@ test.describe('Named view tests', () => {
     await cmdBar.argumentInput.fill(myNamedView1)
     await cmdBar.progressCmdBar(false)
 
-    let toastMessage = page.getByText('Named view uuid1 created.')
-    await expect(toastMessage).toBeInViewport()
+    await page.waitForTimeout(1000)
 
-    await scene.moveCameraTo({ x: 608, y: 0, z: 0 }, { x: 0, y: 0, z: 0 })
-    await page.waitForTimeout(2500)
+    const orbitMouseStart = { x: 800, y: 130 }
+    const orbitMouseEnd = { x: 0, y: 130 }
+    await page.mouse.move(orbitMouseStart.x, orbitMouseStart.y)
+    await page.mouse.down({ button: 'middle' })
+    await page.mouse.move(orbitMouseEnd.x, orbitMouseEnd.y, {
+      steps: 3,
+    })
+    await page.mouse.up({ button: 'middle' })
+
+    await page.waitForTimeout(1000)
 
     await cmdBar.openCmdBar()
     await cmdBar.chooseCommand('create named view')
     await cmdBar.argumentInput.fill(myNamedView2)
     await cmdBar.progressCmdBar(false)
 
-    toastMessage = page.getByText('Named view uuid2 created.')
-    await expect(toastMessage).toBeInViewport()
+    // Wait a moment for the project.toml to get written to disk with the new view point
+    await page.waitForTimeout(1000)
 
     // Generate paths for the project.toml
     const tempProjectSettingsFilePath = join(

e2e/playwright/named-views.spec.ts-snapshots/verify-named-view-gets-created-chromium-darwin

@@ -1,16 +0,0 @@
-[settings]
-modeling = { }
-text_editor = { }
-command_bar = { }
-
-[settings.app.named_views.0656fb1a-9640-473e-b334-591dc70c0138]
-name = "uuid1"
-eye_offset = 1_378.0059
-fov_y = 45
-is_ortho = false
-ortho_scale_enabled = true
-ortho_scale_factor = 1.6
-pivot_position = [ 0, 0, 0 ]
-pivot_rotation = [ 0.5380994, 0.0, 0.0, 0.8428814 ]
-world_coord_system = "right_handed_up_z"
-version = 1