Revert "Revert "Remove Create with Text-to-CAD from toolbar, make commands in…"

This reverts commit 447069a97b.

.github/ci-cd-scripts/upload-results.sh

@@ -6,7 +6,6 @@ if [ -z "${TAB_API_URL:-}" ] || [ -z "${TAB_API_KEY:-}" ]; then
 fi
 
 project="https://github.com/KittyCAD/modeling-app"
-suite="${CI_SUITE:-unit}"
 branch="${GITHUB_HEAD_REF:-${GITHUB_REF_NAME:-}}"
 commit="${CI_COMMIT_SHA:-${GITHUB_SHA:-}}"
 
@@ -14,7 +13,6 @@ echo "Uploading batch results"
 curl --silent --request POST \
   --header "X-API-Key: ${TAB_API_KEY}" \
   --form "project=${project}" \
-  --form "suite=${suite}" \
   --form "branch=${branch}" \
   --form "commit=${commit}" \
   --form "tests=@test-results/junit.xml" \

.github/workflows/cargo-test.yml

@@ -1,22 +1,16 @@
-name: cargo test
-
 on:
   push:
     branches:
       - main
   pull_request:
   workflow_dispatch:
-  schedule:
-    - cron: 0 * * * *  # hourly
-
 permissions:
   contents: read
   pull-requests: write
-
 concurrency:
   group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
   cancel-in-progress: true
-
+name: cargo test
 jobs:
   build-test-artifacts:
     name: Build test artifacts
@@ -94,7 +88,6 @@ jobs:
           KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN_DEV}}
           ZOO_HOST: https://api.dev.zoo.dev
           RUST_BACKTRACE: full
-          RUST_MIN_STACK: 10485760000
       - name: Commit differences
         if: steps.path-changes.outputs.outside-kcl-samples == 'false' && steps.cargo-test-kcl-samples.outcome == 'failure'
         shell: bash
@@ -126,7 +119,6 @@ jobs:
           # Configure nextest when it's run by insta (via just).
           NEXTEST_PROFILE: ci
           RUST_BACKTRACE: full
-          RUST_MIN_STACK: 10485760000
       - name: Build and archive tests
         run: |
           cd rust
@@ -190,7 +182,6 @@ jobs:
         env:
           KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN_DEV}}
           ZOO_HOST: https://api.dev.zoo.dev
-          RUST_MIN_STACK: 10485760000
       - name: Upload results
         if: always()
         run: .github/ci-cd-scripts/upload-results.sh
@@ -199,7 +190,6 @@ jobs:
           TAB_API_KEY: ${{ secrets.TAB_API_KEY }}
           CI_COMMIT_SHA: ${{ github.event.pull_request.head.sha }}
           CI_PR_NUMBER: ${{ github.event.pull_request.number }}
-          CI_SUITE: e2e:kcl
   run-internal-kcl-samples:
     name: cargo test (internal-kcl-samples)
     runs-on:
@@ -248,7 +238,6 @@ jobs:
           KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN_DEV}}
           ZOO_HOST: https://api.dev.zoo.dev
           MODELING_APP_INTERNAL_SAMPLES_SECRET: ${{secrets.MODELING_APP_INTERNAL_SAMPLES_SECRET}}
-          RUST_MIN_STACK: 10485760000
   run-wasm-tests:
     name: Run wasm tests
     strategy:

.github/workflows/e2e-tests.yml

@@ -1,5 +1,4 @@
 name: E2E Tests
-
 on:
   push:
     branches:
@@ -144,7 +143,7 @@ jobs:
       - name: Install browsers
         run: npm run playwright install --with-deps
 
-      - name: Test snapshots
+      - name: Capture snapshots
         uses: nick-fields/retry@v3.0.2
         with:
           shell: bash
@@ -157,19 +156,6 @@ jobs:
           TAB_API_KEY: ${{ secrets.TAB_API_KEY }}
           CI_COMMIT_SHA: ${{ github.event.pull_request.head.sha }}
           CI_PR_NUMBER: ${{ github.event.pull_request.number }}
-          CI_SUITE: e2e:snapshots
-          TARGET: web
-
-      - name: Update snapshots
-        if: always()
-        run: npm run test:snapshots -- --last-failed --update-snapshots
-        env:
-          token: ${{ secrets.KITTYCAD_API_TOKEN_DEV }}
-          TAB_API_URL: ${{ secrets.TAB_API_URL }}
-          TAB_API_KEY: ${{ secrets.TAB_API_KEY }}
-          CI_COMMIT_SHA: ${{ github.event.pull_request.head.sha }}
-          CI_PR_NUMBER: ${{ github.event.pull_request.number }}
-          CI_SUITE: e2e:snapshots
           TARGET: web
 
       - uses: actions/upload-artifact@v4
@@ -187,7 +173,7 @@ jobs:
         id: git-check
         run: |
             git add e2e/playwright/snapshot-tests.spec.ts-snapshots e2e/playwright/snapshots
-            if git status | grep --quiet "Changes to be committed"
+            if git status | grep -q "Changes to be committed"
             then echo "modified=true" >> $GITHUB_OUTPUT
             else echo "modified=false" >> $GITHUB_OUTPUT
             fi
@@ -320,7 +306,6 @@ jobs:
           TAB_API_KEY: ${{ secrets.TAB_API_KEY }}
           CI_COMMIT_SHA: ${{ github.event.pull_request.head.sha }}
           CI_PR_NUMBER: ${{ github.event.pull_request.number }}
-          CI_SUITE: e2e:desktop
           TARGET: desktop
 
       - uses: actions/upload-artifact@v4

CONTRIBUTING.md

@@ -122,11 +122,12 @@ https://github.com/KittyCAD/modeling-app/issues/new
 
 #### 2. Push a new tag
 
-Decide on a `v`-prefixed semver `VERSION` (eg. `v1.2.3`) with the team and tag the repo, eg. on latest main:
+Create a new tag and push it to the repo. The `semantic-release.sh` script will automatically bump the minor part, which we use the most. For instance going from `v0.27.0` to `v0.28.0`.
 
 ```
+VERSION=$(./scripts/semantic-release.sh)
 git tag $VERSION
-git push origin $VERSION
+git push origin --tags
 ```
 
 This will trigger the `build-apps` workflow, set the version, build & sign the apps, and generate release files.

INSTALL.md

@@ -4,7 +4,7 @@ Compared to other CAD software, getting Zoo Design Studio up and running is quic
 
 ## Windows
 
-1. Download the [Zoo Design Studio installer](https://zoo.dev/design-studio/download) for Windows and for your processor type.
+1. Download the [Zoo Design Studio installer](https://zoo.dev/modeling-app/download) for Windows and for your processor type.
 
 2. Once downloaded, run the installer `Zoo Design Studio-{version}-{arch}-win.exe` which should take a few seconds.
 
@@ -12,7 +12,7 @@ Compared to other CAD software, getting Zoo Design Studio up and running is quic
 
 ## macOS
 
-1. Download the [Zoo Design Studio installer](https://zoo.dev/design-studio/download) for macOS and for your processor type.
+1. Download the [Zoo Design Studio installer](https://zoo.dev/modeling-app/download) for macOS and for your processor type.
 
 2. Once downloaded, open the disk image `Zoo Design Studio-{version}-{arch}-mac.dmg` and drag the applications to your `Applications` directory.
 
@@ -21,7 +21,7 @@ Compared to other CAD software, getting Zoo Design Studio up and running is quic
 
 ## Linux 
 
-1. Download the [Zoo Design Studio installer](https://zoo.dev/design-studio/download) for Linux and for your processor type.
+1. Download the [Zoo Design Studio installer](https://zoo.dev/modeling-app/download) for Linux and for your processor type.
 
 2. Install the dependencies needed to run the [AppImage format](https://appimage.org/).
     -  On Ubuntu, install the FUSE library with these commands in a terminal.

README.md

@@ -2,7 +2,7 @@
 
 # Zoo Design Studio
 
-[zoo.dev/design-studio](https://zoo.dev/design-studio)
+[zoo.dev/modeling-app](https://zoo.dev/modeling-app)
 
 A CAD application from the future, brought to you by the [Zoo team](https://zoo.dev).
 
@@ -40,8 +40,12 @@ The 3D view in Design Studio is just a video stream from our hosted geometry eng
 
 ## Get Started
 
-We recommend downloading the latest application binary from our [website](https://zoo.dev/design-studio/download). If you don't see your platform or architecture supported there, please file an issue. See the [installation guide](INSTALL.md) for additional instructions.
+We recommend downloading the latest application binary from our [releases](https://github.com/KittyCAD/modeling-app/releases) page. If you don't see your platform or architecture supported there, please file an issue.
 
 ## Developing
 
-Finally, if you'd like to run a development build or contribute to the project, please visit our [contributor guide](CONTRIBUTING.md) to get started. To contribute to the KittyCAD Language, see the dedicated [readme](rust/kcl-lib/README.md) for KCL.
+Finally, if you'd like to run a development build or contribute to the project, please visit our [contributor guide](CONTRIBUTING.md) to get started.
+
+## KCL
+
+To contribute to the KittyCAD Language, see the [README](https://github.com/KittyCAD/modeling-app/tree/main/rust/kcl-lib) for KCL.

docs/kcl-lang/index.md

@@ -4,7 +4,7 @@ excerpt: "Documentation of the KCL language for the Zoo Design Studio."
 layout: manual
 ---
 
-This is a reference for KCL. If you are learning KCL, you may prefer the [guide](https://zoo.dev/docs/kcl-book/intro.html) which explains
+This is a reference for KCL. If you are learning KCL, you may prefer the [guide]() which explains
 things in a more tutorial fashion. See also our documentation of the [standard library](/docs/kcl-std).
 
 ## Topics

docs/kcl-lang/modules.md

@@ -27,6 +27,9 @@ import increment from "util.kcl"
 answer = increment(41)
 ```
 
+Imported files _must_ be in the same project so that units are uniform across
+modules. This means that it must be in the same directory.
+
 Import statements must be at the top-level of a file. It is not allowed to have
 an `import` statement inside a function or in the body of an if‑else.
 
@@ -55,9 +58,6 @@ Imported symbols can be renamed for convenience or to avoid name collisions.
 import increment as inc, decrement as dec from "util.kcl"
 ```
 
-You can import files from the current directory or from subdirectories, but if importing from a
-subdirectory you can only import `main.kcl`.
-
 ---
 
 ## Functions vs `clone`
@@ -229,19 +229,6 @@ The final statement is what's important because it's the return value of the
 entire module. The module is expected to return a single object that can be used
 as a variable by the file that imports it.
 
-The name of the file or subdirectory is used as the name of the variable within the importing program.
-If you want to use a different name, you can do so by using the `as` keyword:
-
-```kcl,norun
-import "cube.kcl"                // Introduces a new variable called `cube`.
-import "cube.kcl" as block       // Introduces a new variable called `block`.
-import "cube/main.kcl"           // Introduces a new variable called `cube`.
-import "cube/main.kcl" as block  // Introduces a new variable called `block`.
-```
-
-If the filename includes hyphens (`-`) or starts with an underscore (`_`), then you must specify a
-variable name.
-
 ---
 
 ## Multiple instances of the same import

docs/kcl-std/functions/std-sketch-circle.md

@@ -11,8 +11,7 @@ layout: manual
 circle(
   @sketch_or_surface: Sketch | Plane | Face,
   center: Point2d,
-  radius?: number(Length),
-  diameter?: number(Length),
+  radius: number(Length),
   tag?: tag,
 ): Sketch
 ```
@@ -26,8 +25,7 @@ the provided (x, y) origin point.
 |----------|------|-------------|----------|
 | `sketch_or_surface` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) or [`Plane`](/docs/kcl-std/types/std-types-Plane) or [`Face`](/docs/kcl-std/types/std-types-Face) | Sketch to extend, or plane or surface to sketch on. | Yes |
 | `center` | [`Point2d`](/docs/kcl-std/types/std-types-Point2d) | The center of the circle. | Yes |
-| `radius` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The radius of the circle. Incompatible with `diameter`. | No |
-| `diameter` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The diameter of the circle. Incompatible with `radius`. | No |
+| `radius` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The radius of the circle. | Yes |
 | [`tag`](/docs/kcl-std/types/std-types-tag) | [`tag`](/docs/kcl-std/types/std-types-tag) | Create a new tag which refers to this circle. | No |
 
 ### Returns
@@ -53,7 +51,7 @@ exampleSketch = startSketchOn(XZ)
   |> line(end = [0, 30])
   |> line(end = [-30, 0])
   |> close()
-  |> subtract2d(tool = circle(center = [0, 15], diameter = 10))
+  |> subtract2d(tool = circle(center = [0, 15], radius = 5))
 
 example = extrude(exampleSketch, length = 5)
 ```

docs/kcl-std/index.md

@@ -65,7 +65,7 @@ layout: manual
   * [`line`](/docs/kcl-std/line)
   * [`loft`](/docs/kcl-std/loft)
   * [`patternCircular2d`](/docs/kcl-std/patternCircular2d)
-  * [`patternTransform2d`](/docs/kcl-std/functions/std-sketch-patternTransform2d)
+  * [`patternTransform2d`](/docs/kcl-std/patternTransform2d)
   * [`polygon`](/docs/kcl-std/polygon)
   * [`profileStart`](/docs/kcl-std/profileStart)
   * [`profileStartX`](/docs/kcl-std/profileStartX)
@@ -94,7 +94,7 @@ layout: manual
   * [`intersect`](/docs/kcl-std/intersect)
   * [`patternCircular3d`](/docs/kcl-std/patternCircular3d)
   * [`patternLinear3d`](/docs/kcl-std/patternLinear3d)
-  * [`patternTransform`](/docs/kcl-std/functions/std-solid-patternTransform)
+  * [`patternTransform`](/docs/kcl-std/patternTransform)
   * [`shell`](/docs/kcl-std/functions/std-solid-shell)
   * [`subtract`](/docs/kcl-std/subtract)
   * [`union`](/docs/kcl-std/union)

docs/kcl-std/modules/std-sketch.md

@@ -30,7 +30,7 @@ This module contains functions for creating and manipulating sketches, and makin
 * [`line`](/docs/kcl-std/line)
 * [`loft`](/docs/kcl-std/loft)
 * [`patternCircular2d`](/docs/kcl-std/patternCircular2d)
-* [`patternTransform2d`](/docs/kcl-std/functions/std-sketch-patternTransform2d)
+* [`patternTransform2d`](/docs/kcl-std/patternTransform2d)
 * [`polygon`](/docs/kcl-std/polygon)
 * [`profileStart`](/docs/kcl-std/profileStart)
 * [`profileStartX`](/docs/kcl-std/profileStartX)

docs/kcl-std/modules/std-solid.md

@@ -18,7 +18,7 @@ This module contains functions for modifying solids, e.g., by adding a fillet or
 * [`intersect`](/docs/kcl-std/intersect)
 * [`patternCircular3d`](/docs/kcl-std/patternCircular3d)
 * [`patternLinear3d`](/docs/kcl-std/patternLinear3d)
-* [`patternTransform`](/docs/kcl-std/functions/std-solid-patternTransform)
+* [`patternTransform`](/docs/kcl-std/patternTransform)
 * [`shell`](/docs/kcl-std/functions/std-solid-shell)
 * [`subtract`](/docs/kcl-std/subtract)
 * [`union`](/docs/kcl-std/union)

docs/kcl-std/modules/std.md

@@ -11,7 +11,7 @@ Contains frequently used constants, functions for interacting with the KittyCAD
 
 The standard library is organised into modules (listed below), but most things are always available in KCL programs. 
 
-You might also want the [KCL language reference](/docs/kcl-lang) or the [KCL guide](https://zoo.dev/docs/kcl-book/intro.html). 
+You might also want the [KCL language reference](/docs/kcl-lang) or the [KCL guide](). 
 
 ## Modules
 

docs/kcl-std/patternLinear3d.md

@@ -26,7 +26,7 @@ patternLinear3d(
 | `solids` | [`[Solid]`](/docs/kcl-std/types/std-types-Solid) | The solid(s) to duplicate | Yes |
 | `instances` | [`number`](/docs/kcl-std/types/std-types-number) | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
 | `distance` | [`number`](/docs/kcl-std/types/std-types-number) | Distance between each repetition. Also known as 'spacing'. | Yes |
-| `axis` | [`Point3d`](/docs/kcl-std/types/std-types-Point3d) | The axis of the pattern. A 3D vector. | Yes |
+| `axis` | [`Point3d`](/docs/kcl-std/types/std-types-Point3d) | The axis of the pattern. A 2D vector. | Yes |
 | `useOriginal` | [`bool`](/docs/kcl-std/types/std-types-bool) | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns

docs/kcl-std/patternTransform2d.md

@@ -1,19 +1,19 @@
 ---
 title: "patternTransform2d"
 subtitle: "Function in std::sketch"
-excerpt: "Just like `patternTransform`, but works on 2D sketches not 3D solids."
+excerpt: "Just like patternTransform, but works on 2D sketches not 3D solids."
 layout: manual
 ---
 
-Just like `patternTransform`, but works on 2D sketches not 3D solids.
+Just like patternTransform, but works on 2D sketches not 3D solids.
 
 ```kcl
 patternTransform2d(
-  @sketches: [Sketch; 1+],
-  instances: number(_),
-  transform: fn(number(_)): { },
-  useOriginal?: boolean,
-): [Sketch; 1+]
+  @sketches: [Sketch],
+  instances: number,
+  transform: FunctionSource,
+  useOriginal?: bool,
+): [Sketch]
 ```
 
 
@@ -22,14 +22,14 @@ patternTransform2d(
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketches` | [`[Sketch; 1+]`](/docs/kcl-std/types/std-types-Sketch) | The sketch(es) to duplicate. | Yes |
-| `instances` | [`number(_)`](/docs/kcl-std/types/std-types-number) | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
-| `transform` | [`fn(number(_)): { }`](/docs/kcl-std/types/std-types-fn) | How each replica should be transformed. The transform function takes a single parameter: an integer representing which number replication the transform is for. E.g. the first replica to be transformed will be passed the argument `1`. This simplifies your math: the transform function can rely on id `0` being the original instance passed into the `patternTransform`. See the examples. | Yes |
-| `useOriginal` | `boolean` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. | No |
+| `sketches` | [`[Sketch]`](/docs/kcl-std/types/std-types-Sketch) | The sketch(es) to duplicate | Yes |
+| `instances` | [`number`](/docs/kcl-std/types/std-types-number) | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
+| `transform` | `FunctionSource` | How each replica should be transformed. The transform function takes a single parameter: an integer representing which number replication the transform is for. E.g. the first replica to be transformed will be passed the argument `1`. This simplifies your math: the transform function can rely on id `0` being the original instance passed into the `patternTransform`. See the examples. | Yes |
+| `useOriginal` | [`bool`](/docs/kcl-std/types/std-types-bool) | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns
 
-[`[Sketch; 1+]`](/docs/kcl-std/types/std-types-Sketch)
+[`[Sketch]`](/docs/kcl-std/types/std-types-Sketch)
 
 
 ### Examples

e2e/playwright/code-pane-and-errors.spec.ts

@@ -78,10 +78,11 @@ extrude001 = extrude(sketch001, length = 5)`
 
     // Delete a character to break the KCL
     await editor.openPane()
-    await editor.scrollToText('extrude(%, length = width)')
-    await page.getByText('extrude(%, length = width)').click()
-
-    await page.keyboard.press(')')
+    await editor.scrollToText('bracketLeg1Sketch, length = thickness)')
+    await page
+      .getByText('extrude(bracketLeg1Sketch, length = thickness)')
+      .click()
+    await page.keyboard.press('Backspace')
 
     // Ensure that a badge appears on the button
     await expect(codePaneButtonHolder).toContainText('notification')
@@ -98,11 +99,16 @@ extrude001 = extrude(sketch001, length = 5)`
 
     await page.waitForTimeout(500)
 
+    // Ensure that a badge appears on the button
+    await expect(codePaneButtonHolder).toContainText('notification')
+    // Ensure we have no errors in the gutter.
+    await expect(page.locator('.cm-lint-marker-error')).not.toBeVisible()
+
     // Open the code pane
     await editor.openPane()
 
-    // Go to our problematic code again
-    await editor.scrollToText('extrude(%, length = w')
+    // Go to our problematic code again (missing closing paren!)
+    await editor.scrollToText('extrude(bracketLeg1Sketch, length = thickness')
 
     // Ensure that a badge appears on the button
     await expect(codePaneButtonHolder).toContainText('notification')
@@ -229,48 +235,6 @@ extrude001 = extrude(sketch001, length = 5)`
         .first()
     ).toBeVisible()
   })
-
-  test('KCL errors with functions show hints for the entire backtrace', async ({
-    page,
-    homePage,
-    scene,
-    cmdBar,
-    editor,
-    toolbar,
-  }) => {
-    await homePage.goToModelingScene()
-    await scene.settled(cmdBar)
-
-    const code = `fn check(@x) {
-  return assert(x, isGreaterThan = 0)
-}
-
-fn middle(@x) {
-  return check(x)
-}
-
-middle(1)
-middle(0)
-`
-    await test.step('Set the code with a KCL error', async () => {
-      await toolbar.openPane('code')
-      await editor.replaceCode('', code)
-    })
-    // This shows all the diagnostics in a way that doesn't require the mouse
-    // pointer hovering over a coordinate, which would be brittle.
-    await test.step('Open CodeMirror diagnostics list', async () => {
-      // Ensure keyboard focus is in the editor.
-      await page.getByText('fn check(').click()
-      await page.keyboard.press('ControlOrMeta+Shift+M')
-    })
-    await expect(
-      page.getByText(`assert failed: Expected 0 to be greater than 0 but it wasn't
-check()
-middle()`)
-    ).toBeVisible()
-    // There should be one hint inside middle() and one at the top level.
-    await expect(page.getByText('Part of the error backtrace')).toHaveCount(2)
-  })
 })
 
 test(

e2e/playwright/command-bar-tests.spec.ts

@@ -45,16 +45,15 @@ test.describe('Command bar tests', () => {
     await cmdBar.expectState({
       stage: 'arguments',
       commandName: 'Extrude',
-      currentArgKey: 'sketches',
-      currentArgValue: '',
+      currentArgKey: 'length',
+      currentArgValue: '5',
       headerArguments: {
-        Profiles: '',
+        Profiles: '1 profile',
         Length: '',
       },
-      highlightedHeaderArg: 'Profiles',
+      highlightedHeaderArg: 'length',
     })
     await cmdBar.progressCmdBar()
-    await cmdBar.progressCmdBar()
     await cmdBar.expectState({
       stage: 'review',
       commandName: 'Extrude',
@@ -685,33 +684,4 @@ c = 3 + a`
       highlightedHeaderArg: 'value',
     })
   })
-
-  test('Text-to-CAD command can be closed with escape while in prompt', async ({
-    page,
-    homePage,
-    cmdBar,
-  }) => {
-    await homePage.expectState({
-      projectCards: [],
-      sortBy: 'last-modified-desc',
-    })
-    await homePage.textToCadBtn.click()
-    await cmdBar.expectState({
-      stage: 'arguments',
-      commandName: 'Text-to-CAD Create',
-      currentArgKey: 'prompt',
-      currentArgValue: '',
-      headerArguments: {
-        Method: 'New project',
-        NewProjectName: 'untitled',
-        Prompt: '',
-      },
-      highlightedHeaderArg: 'prompt',
-    })
-    await page.keyboard.press('Escape')
-    await cmdBar.toBeClosed()
-    await cmdBar.expectState({
-      stage: 'commandBarClosed',
-    })
-  })
 })

e2e/playwright/editor-tests.spec.ts

@@ -1001,7 +1001,7 @@ a1 = startSketchOn(offsetPlane(XY, offset = 10))
       await expect(page.locator('.cm-content')).toHaveText(
         `@settings(defaultLengthUnit = in)
 sketch001 = startSketchOn(XZ)
-        |> startProfile(%, at = [0, 12])
+        |> startProfile(%, at = [3.14, 12])
         |> xLine(%, length = 5) // lin`.replaceAll('\n', '')
       )
 
@@ -1076,7 +1076,7 @@ sketch001 = startSketchOn(XZ)
       await expect(page.locator('.cm-content')).toHaveText(
         `@settings(defaultLengthUnit = in)
 sketch001 = startSketchOn(XZ)
-        |> startProfile(%, at = [0, 12])
+        |> startProfile(%, at = [3.14, 12])
         |> xLine(%, length = 5) // lin`.replaceAll('\n', '')
       )
     })
@@ -1134,7 +1134,6 @@ sketch001 = startSketchOn(XZ)
     // Wait for the selection to register (TODO: we need a definitive way to wait for this)
     await page.waitForTimeout(200)
     await toolbar.extrudeButton.click()
-    await cmdBar.progressCmdBar()
     await cmdBar.expectState({
       stage: 'arguments',
       currentArgKey: 'length',
@@ -1356,7 +1355,9 @@ sketch001 = startSketchOn(XZ)
       const u = await getUtils(page)
       const projectLink = page.getByRole('link', { name: 'cube' })
       const gizmo = page.locator('[aria-label*=gizmo]')
-      const resetCameraButton = page.getByRole('button', { name: 'Reset view' })
+      const resetCameraButton = page.getByRole('button', {
+        name: 'Reset view',
+      })
       const locationToHaveColor = async (
         position: { x: number; y: number },
         color: [number, number, number]
@@ -1590,38 +1591,4 @@ sketch001 = startSketchOn(XZ)
       await expect(page.getByTestId('center-rectangle')).toBeVisible()
     })
   })
-
-  test('syntax errors still show when reopening KCL pane', async ({
-    page,
-    homePage,
-    scene,
-    cmdBar,
-  }) => {
-    const u = await getUtils(page)
-    await page.setBodyDimensions({ width: 1200, height: 500 })
-
-    await homePage.goToModelingScene()
-
-    // Wait for connection, this is especially important for this test, because safeParse is invoked when
-    // connection is established which would interfere with the test if it happened during later steps.
-    await scene.connectionEstablished()
-    await scene.settled(cmdBar)
-
-    // Code with no error
-    await u.codeLocator.fill(`x = 7`)
-    await page.waitForTimeout(200) // allow some time for the error to show potentially
-    await expect(page.locator('.cm-lint-marker-error')).toHaveCount(0)
-
-    // Code with error
-    await u.codeLocator.fill(`x 7`)
-    await expect(page.locator('.cm-lint-marker-error')).toHaveCount(1)
-
-    // Close and reopen KCL code panel
-    await u.closeKclCodePanel()
-    await expect(page.locator('.cm-lint-marker-error')).toHaveCount(0) // error disappears on close
-    await u.openKclCodePanel()
-
-    // Verify error is still visible
-    await expect(page.locator('.cm-lint-marker-error')).toHaveCount(1)
-  })
 })

e2e/playwright/file-tree.spec.ts

@@ -238,26 +238,6 @@ test.describe('when using the file tree to', () => {
     }
   )
 
-  test(
-    `create new folders and that doesn't trigger a navigation`,
-    { tag: ['@electron', '@macos', '@windows'] },
-    async ({ page, homePage, scene, toolbar, cmdBar }) => {
-      await homePage.goToModelingScene()
-      await scene.settled(cmdBar)
-      await toolbar.openPane('files')
-      const { createNewFolder } = await getUtils(page, test)
-
-      await createNewFolder('folder')
-
-      await createNewFolder('folder.kcl')
-
-      await test.step(`Postcondition: folders are created and we didn't navigate`, async () => {
-        await toolbar.expectFileTreeState(['folder', 'folder.kcl', 'main.kcl'])
-        await expect(toolbar.fileName).toHaveText('main.kcl')
-      })
-    }
-  )
-
   test(
     'deleting all files recreates a default main.kcl with no code',
     { tag: '@electron' },

e2e/playwright/fixtures/cmdBarFixture.ts

@@ -105,19 +105,14 @@ export class CmdBarFixture {
   expectState = async (expected: CmdBarSerialised) => {
     return expect.poll(() => this._serialiseCmdBar()).toEqual(expected)
   }
-  /**
-   * This method is used to progress the command bar to the next step, defaulting to clicking the next button.
-   * Optionally, with the `shouldUseKeyboard` parameter, it will hit `Enter` to progress.
-   * * TODO: This method assumes the user has a valid input to the current stage,
+  /** The method will use buttons OR press enter randomly to progress the cmdbar,
+   * this could have unexpected results depending on what's focused
+   *
+   * TODO: This method assumes the user has a valid input to the current stage,
    * and assumes we are past the `pickCommand` step.
    */
-  progressCmdBar = async (shouldUseKeyboard = false) => {
+  progressCmdBar = async (shouldFuzzProgressMethod = true) => {
     await this.page.waitForTimeout(2000)
-    if (shouldUseKeyboard) {
-      await this.page.keyboard.press('Enter')
-      return
-    }
-
     const arrowButton = this.page.getByRole('button', {
       name: 'arrow right Continue',
     })
@@ -313,11 +308,6 @@ export class CmdBarFixture {
     await expect(this.cmdBarElement).toBeVisible({ timeout: 10_000 })
   }
 
-  async toBeClosed() {
-    // Check that the command bar is closed
-    await expect(this.cmdBarElement).not.toBeVisible({ timeout: 10_000 })
-  }
-
   async expectArgValue(value: string) {
     // Check the placeholder project name exists
     const actualArgument = await this.cmdBarElement

e2e/playwright/fixtures/homePageFixture.ts

@@ -26,7 +26,6 @@ export class HomePageFixture {
   sortByNameBtn!: Locator
   appHeader!: Locator
   tutorialBtn!: Locator
-  textToCadBtn!: Locator
 
   constructor(page: Page) {
     this.page = page
@@ -48,7 +47,6 @@ export class HomePageFixture {
     this.sortByNameBtn = this.page.getByTestId('home-sort-by-name')
     this.appHeader = this.page.getByTestId('app-header')
     this.tutorialBtn = this.page.getByTestId('home-tutorial-button')
-    this.textToCadBtn = this.page.getByTestId('home-text-to-cad')
   }
 
   private _serialiseSortBy = async (): Promise<

e2e/playwright/lib/api-reporter.ts

@@ -61,7 +61,6 @@ class MyAPIReporter implements Reporter {
     const payload = {
       // Required information
       project: 'https://github.com/KittyCAD/modeling-app',
-      suite: process.env.CI_SUITE || 'e2e',
       branch: process.env.GITHUB_HEAD_REF || process.env.GITHUB_REF_NAME || '',
       commit: process.env.CI_COMMIT_SHA || process.env.GITHUB_SHA || '',
       test: test.titlePath().slice(2).join(' › '),

e2e/playwright/point-click-assemblies.spec.ts

@@ -70,28 +70,22 @@ test.describe('Point-and-click assemblies tests', () => {
       await test.step('Setup parts and expect empty assembly scene', async () => {
         const projectName = 'assembly'
         await context.folderSetupFn(async (dir) => {
-          const projDir = path.join(dir, projectName)
-          const nestedProjDir = path.join(dir, projectName, 'nested', 'twice')
-          await fsp.mkdir(projDir, { recursive: true })
-          await fsp.mkdir(nestedProjDir, { recursive: true })
+          const bracketDir = path.join(dir, projectName)
+          await fsp.mkdir(bracketDir, { recursive: true })
           await Promise.all([
             fsp.copyFile(
               executorInputPath('cylinder.kcl'),
-              path.join(projDir, 'cylinder.kcl')
-            ),
-            fsp.copyFile(
-              executorInputPath('cylinder.kcl'),
-              path.join(nestedProjDir, 'main.kcl')
+              path.join(bracketDir, 'cylinder.kcl')
             ),
             fsp.copyFile(
               executorInputPath('e2e-can-sketch-on-chamfer.kcl'),
-              path.join(projDir, 'bracket.kcl')
+              path.join(bracketDir, 'bracket.kcl')
             ),
             fsp.copyFile(
               testsInputPath('cube.step'),
-              path.join(projDir, 'cube.step')
+              path.join(bracketDir, 'cube.step')
             ),
-            fsp.writeFile(path.join(projDir, 'main.kcl'), ''),
+            fsp.writeFile(path.join(bracketDir, 'main.kcl'), ''),
           ])
         })
         await page.setBodyDimensions({ width: 1000, height: 500 })
@@ -173,25 +167,6 @@ test.describe('Point-and-click assemblies tests', () => {
         await expect(
           page.getByText('This file is already imported')
         ).toBeVisible()
-        await cmdBar.closeCmdBar()
-      })
-
-      await test.step('Insert a nested kcl part', async () => {
-        await insertPartIntoAssembly(
-          'nested/twice/main.kcl',
-          'main',
-          toolbar,
-          cmdBar,
-          page
-        )
-        await toolbar.openPane('code')
-        await page.waitForTimeout(10000)
-        await editor.expectEditor.toContain(
-          `
-          import "nested/twice/main.kcl" as main 
-          `,
-          { shouldNormalise: true }
-        )
       })
     }
   )

e2e/playwright/point-click.spec.ts

@@ -74,15 +74,6 @@ test.describe('Point-and-click tests', () => {
 
     await test.step('do extrude flow and check extrude code is added to editor', async () => {
       await toolbar.extrudeButton.click()
-      await cmdBar.expectState({
-        stage: 'arguments',
-        currentArgKey: 'sketches',
-        currentArgValue: '',
-        headerArguments: { Profiles: '', Length: '' },
-        highlightedHeaderArg: 'Profiles',
-        commandName: 'Extrude',
-      })
-      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'length',
@@ -1654,15 +1645,6 @@ sketch002 = startSketchOn(plane001)
 
         await test.step(`Go through the command bar flow with preselected sketches`, async () => {
           await toolbar.loftButton.click()
-          await cmdBar.expectState({
-            stage: 'arguments',
-            currentArgKey: 'sketches',
-            currentArgValue: '',
-            headerArguments: { Profiles: '' },
-            highlightedHeaderArg: 'Profiles',
-            commandName: 'Loft',
-          })
-          await cmdBar.progressCmdBar()
           await cmdBar.expectState({
             stage: 'review',
             headerArguments: { Profiles: '2 profiles' },
@@ -1873,11 +1855,7 @@ sketch002 = startSketchOn(XZ)
           },
           stage: 'review',
         })
-        // Confirm we can submit from the review step with just `Enter`
-        await cmdBar.progressCmdBar(true)
-        await cmdBar.expectState({
-          stage: 'commandBarClosed',
-        })
+        await cmdBar.progressCmdBar()
       })
 
       await test.step(`Confirm code is added to the editor, scene has changed`, async () => {
@@ -2017,7 +1995,7 @@ profile001 = ${circleCode}`
         },
         stage: 'review',
       })
-      await cmdBar.progressCmdBar(true)
+      await cmdBar.progressCmdBar()
       await editor.expectEditor.toContain(sweepDeclaration)
     })
 
@@ -2110,18 +2088,6 @@ extrude001 = extrude(sketch001, length = -12)
     await test.step(`Apply fillet to the preselected edge`, async () => {
       await page.waitForTimeout(100)
       await toolbar.filletButton.click()
-      await cmdBar.expectState({
-        commandName: 'Fillet',
-        highlightedHeaderArg: 'selection',
-        currentArgKey: 'selection',
-        currentArgValue: '',
-        headerArguments: {
-          Selection: '',
-          Radius: '',
-        },
-        stage: 'arguments',
-      })
-      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         commandName: 'Fillet',
         highlightedHeaderArg: 'radius',
@@ -2651,18 +2617,6 @@ extrude001 = extrude(profile001, length = 5)
       await test.step(`Apply fillet`, async () => {
         await page.waitForTimeout(100)
         await toolbar.filletButton.click()
-        await cmdBar.expectState({
-          commandName: 'Fillet',
-          highlightedHeaderArg: 'selection',
-          currentArgKey: 'selection',
-          currentArgValue: '',
-          headerArguments: {
-            Selection: '',
-            Radius: '',
-          },
-          stage: 'arguments',
-        })
-        await cmdBar.progressCmdBar()
         await cmdBar.expectState({
           commandName: 'Fillet',
           highlightedHeaderArg: 'radius',
@@ -2768,19 +2722,6 @@ extrude001 = extrude(sketch001, length = -12)
     await test.step(`Apply chamfer to the preselected edge`, async () => {
       await page.waitForTimeout(100)
       await toolbar.chamferButton.click()
-      await cmdBar.expectState({
-        commandName: 'Chamfer',
-        highlightedHeaderArg: 'selection',
-        currentArgKey: 'selection',
-        currentArgValue: '',
-        headerArguments: {
-          Selection: '',
-          Length: '',
-        },
-        stage: 'arguments',
-      })
-      await cmdBar.progressCmdBar()
-      await page.waitForTimeout(1000)
       await cmdBar.expectState({
         commandName: 'Chamfer',
         highlightedHeaderArg: 'length',
@@ -3264,8 +3205,6 @@ extrude001 = extrude(sketch001, length = 30)
         await test.step(`Go through the command bar flow with a preselected face (cap)`, async () => {
           await toolbar.shellButton.click()
           await cmdBar.progressCmdBar()
-          await page.waitForTimeout(500)
-          await cmdBar.progressCmdBar()
           await cmdBar.expectState({
             stage: 'review',
             headerArguments: {
@@ -3699,12 +3638,13 @@ tag=$rectangleSegmentC002,
       // revolve
       await editor.scrollToText(codeToSelection)
       await page.getByText(codeToSelection).click()
+      // Wait for the selection to register (TODO: we need a definitive way to wait for this)
+      await page.waitForTimeout(200)
       await toolbar.revolveButton.click()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
       await cmdBar.progressCmdBar()
-      await cmdBar.progressCmdBar()
 
       const newCodeToFind = `revolve001 = revolve(sketch002, angle = 360, axis = X)`
       expect(editor.expectEditor.toContain(newCodeToFind)).toBeTruthy()
@@ -4633,18 +4573,6 @@ path001 = startProfile(sketch001, at = [0, 0])
 
     await test.step('Go through command bar flow', async () => {
       await toolbar.extrudeButton.click()
-      await cmdBar.expectState({
-        stage: 'arguments',
-        currentArgKey: 'sketches',
-        currentArgValue: '',
-        headerArguments: {
-          Profiles: '',
-          Length: '',
-        },
-        highlightedHeaderArg: 'Profiles',
-        commandName: 'Extrude',
-      })
-      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'length',
@@ -4727,19 +4655,6 @@ path001 = startProfile(sketch001, at = [0, 0])
 
     await test.step('Go through command bar flow', async () => {
       await toolbar.sweepButton.click()
-      await cmdBar.expectState({
-        stage: 'arguments',
-        currentArgKey: 'sketches',
-        currentArgValue: '',
-        headerArguments: {
-          Profiles: '',
-          Path: '',
-          Sectional: '',
-        },
-        highlightedHeaderArg: 'Profiles',
-        commandName: 'Sweep',
-      })
-      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'path',
@@ -4824,19 +4739,6 @@ path001 = startProfile(sketch001, at = [0, 0])
     await test.step('Go through command bar flow', async () => {
       await toolbar.closePane('code')
       await toolbar.revolveButton.click()
-      await cmdBar.expectState({
-        stage: 'arguments',
-        currentArgKey: 'sketches',
-        currentArgValue: '',
-        headerArguments: {
-          Profiles: '',
-          AxisOrEdge: '',
-          Angle: '',
-        },
-        highlightedHeaderArg: 'Profiles',
-        commandName: 'Revolve',
-      })
-      await cmdBar.progressCmdBar()
       await cmdBar.expectState({
         stage: 'arguments',
         currentArgKey: 'axisOrEdge',

e2e/playwright/projects.spec.ts

@@ -11,7 +11,6 @@ import {
   getPlaywrightDownloadDir,
   getUtils,
   isOutOfViewInScrollContainer,
-  runningOnWindows,
 } from '@e2e/playwright/test-utils'
 import { expect, test } from '@e2e/playwright/zoo-test'
 
@@ -1980,6 +1979,7 @@ test(
   }
 )
 
+// Flaky
 test(
   'Original project name persist after onboarding',
   { tag: '@electron' },
@@ -2064,55 +2064,3 @@ test(
     })
   }
 )
-
-test(
-  'import from nested directory',
-  { tag: ['@electron', '@windows', '@macos'] },
-  async ({ scene, cmdBar, context, page }) => {
-    await context.folderSetupFn(async (dir) => {
-      const bracketDir = path.join(dir, 'bracket')
-      await fsp.mkdir(bracketDir, { recursive: true })
-      const nestedDir = path.join(bracketDir, 'nested')
-      await fsp.mkdir(nestedDir, { recursive: true })
-
-      await fsp.copyFile(
-        executorInputPath('cylinder-inches.kcl'),
-        path.join(nestedDir, 'main.kcl')
-      )
-      await fsp.writeFile(
-        path.join(bracketDir, 'main.kcl'),
-        runningOnWindows()
-          ? `import 'nested\\main.kcl' as thing\n\nthing`
-          : `import 'nested/main.kcl' as thing\n\nthing`
-      )
-    })
-
-    await page.setBodyDimensions({ width: 1200, height: 500 })
-    const u = await getUtils(page)
-
-    const pointOnModel = { x: 630, y: 280 }
-
-    await test.step('Opening the bracket project should load the stream', async () => {
-      // expect to see the text bracket
-      await expect(page.getByText('bracket')).toBeVisible()
-
-      await page.getByText('bracket').click()
-
-      await scene.settled(cmdBar)
-
-      await expect(
-        page.getByRole('button', { name: 'Start Sketch' })
-      ).toBeEnabled({
-        timeout: 20_000,
-      })
-
-      // gray at this pixel means the stream has loaded in the most
-      // user way we can verify it (pixel color)
-      await expect
-        .poll(() => u.getGreatestPixDiff(pointOnModel, [125, 125, 125]), {
-          timeout: 10_000,
-        })
-        .toBeLessThan(15)
-    })
-  }
-)

e2e/playwright/sketch-tests.spec.ts

@@ -1016,7 +1016,6 @@ profile001 = startProfile(sketch001, at = [${roundOff(scale * 69.6)}, ${roundOff
 
     // sketch selection should already have been made.
     // otherwise the cmdbar would be waiting for a selection.
-    await cmdBar.progressCmdBar()
     await cmdBar.expectState({
       stage: 'arguments',
       currentArgKey: 'length',

e2e/playwright/test-utils.ts

@@ -557,14 +557,6 @@ export async function getUtils(page: Page, test_?: typeof test) {
       })
     },
 
-    createNewFolder: async (name: string) => {
-      return test?.step(`Create a folder named ${name}`, async () => {
-        await page.getByTestId('create-folder-button').click()
-        await page.getByTestId('tree-input-field').fill(name)
-        await page.keyboard.press('Enter')
-      })
-    },
-
     cloneFile: async (name: string) => {
       return test?.step(`Cloning file '${name}'`, async () => {
         await page

e2e/playwright/testing-samples-loading.spec.ts

@@ -103,8 +103,6 @@ test.describe('Testing loading external models', () => {
         file: 'ball-bearing' + FILE_EXT,
         title: 'Ball Bearing',
         file1: 'ball-bearing-1' + FILE_EXT,
-        folderName: 'ball-bearing',
-        folderName1: 'ball-bearing-1',
       }
       const projectCard = page.getByRole('link', { name: 'bracket' })
       const overwriteWarning = page.getByText(
@@ -156,10 +154,8 @@ test.describe('Testing loading external models', () => {
 
       await test.step(`Ensure we made and opened a new file`, async () => {
         await editor.expectEditor.toContain('// ' + sampleOne.title)
-        await expect(
-          page.getByTestId('file-tree-item').getByText(sampleOne.folderName)
-        ).toBeVisible()
-        await expect(projectMenuButton).toContainText('main.kcl')
+        await expect(newlyCreatedFile(sampleOne.file)).toBeVisible()
+        await expect(projectMenuButton).toContainText(sampleOne.file)
       })
 
       await test.step(`Load a KCL sample with the command palette`, async () => {
@@ -173,10 +169,8 @@ test.describe('Testing loading external models', () => {
 
       await test.step(`Ensure we made and opened a new file with a unique name`, async () => {
         await editor.expectEditor.toContain('// ' + sampleOne.title)
-        await expect(
-          page.getByTestId('file-tree-item').getByText(sampleOne.folderName1)
-        ).toBeVisible()
-        await expect(projectMenuButton).toContainText('main.kcl')
+        await expect(newlyCreatedFile(sampleOne.file1)).toBeVisible()
+        await expect(projectMenuButton).toContainText(sampleOne.file1)
       })
     }
   )

e2e/playwright/text-to-cad-tests.spec.ts

@@ -1,3 +1,5 @@
+import fs from 'fs'
+import { join } from 'path'
 import type { Page } from '@playwright/test'
 
 import { createProject, getUtils } from '@e2e/playwright/test-utils'
@@ -401,6 +403,106 @@ test.describe('Text-to-CAD tests', () => {
     await expect(page.getByText(promptWithNewline)).toBeVisible()
   })
 
+  // This will be fine once greg makes prompt at top of file deterministic
+  test('can do many at once and get many prompts back, and interact with many', async ({
+    page,
+    homePage,
+    cmdBar,
+  }) => {
+    // Let this test run longer since we've seen it timeout.
+    test.setTimeout(180_000)
+
+    const u = await getUtils(page)
+
+    await page.setBodyDimensions({ width: 1000, height: 500 })
+
+    await homePage.goToModelingScene()
+    await u.waitForPageLoad()
+
+    await sendPromptFromCommandBarAndSetExistingProject(
+      page,
+      'a 2x4 lego',
+      cmdBar
+    )
+
+    await sendPromptFromCommandBarAndSetExistingProject(
+      page,
+      'a 2x8 lego',
+      cmdBar
+    )
+
+    await sendPromptFromCommandBarAndSetExistingProject(
+      page,
+      'a 2x10 lego',
+      cmdBar
+    )
+
+    // Find the toast.
+    // Look out for the toast message
+    const submittingToastMessage = page.getByText(
+      `Submitting to Text-to-CAD API...`
+    )
+    await expect(submittingToastMessage.first()).toBeVisible()
+
+    const generatingToastMessage = page.getByText(
+      `Generating parametric model...`
+    )
+    await expect(generatingToastMessage.first()).toBeVisible({
+      timeout: 10_000,
+    })
+
+    const successToastMessage = page.getByText(`Text-to-CAD successful`)
+    // We should have three success toasts.
+    await expect(successToastMessage).toHaveCount(3, { timeout: 25_000 })
+
+    await expect(page.getByText(`a 2x4 lego`)).toBeVisible()
+    await expect(page.getByText(`a 2x8 lego`)).toBeVisible()
+    await expect(page.getByText(`a 2x10 lego`)).toBeVisible()
+
+    // Ensure if you reject one, the others stay.
+    const rejectButton = page.getByRole('button', { name: 'Reject' })
+    await expect(rejectButton.first()).toBeVisible()
+    // Click the reject button on the first toast.
+    await rejectButton.first().click()
+
+    // The first toast should disappear, but not the others.
+    await expect(page.getByText(`a 2x10 lego`)).not.toBeVisible()
+    await expect(page.getByText(`a 2x8 lego`)).toBeVisible()
+    await expect(page.getByText(`a 2x4 lego`)).toBeVisible()
+
+    // Ensure you can copy the code for one of the models remaining.
+    const copyToClipboardButton = page.getByRole('button', {
+      name: 'Accept',
+    })
+    await expect(copyToClipboardButton.first()).toBeVisible()
+    // Click the button.
+    await copyToClipboardButton.first().click()
+
+    // Do NOT do AI tests like this: "Expect the code to be pasted."
+    // Reason: AI tests are NONDETERMINISTIC. Thus we need to be as most
+    // general as we can for the assertion.
+    // We can use Kolmogorov complexity as a measurement of the
+    // "probably most minimal version of this program" to have a lower
+    // bound to work with. It is completely by feel because there are
+    // no proofs that any program is its smallest self.
+    const code2x8 = await page.locator('.cm-content').innerText()
+    await expect(code2x8.length).toBeGreaterThan(249)
+
+    // Ensure the final toast remains.
+    await expect(page.getByText(`a 2x10 lego`)).not.toBeVisible()
+    await expect(page.getByText(`Prompt: "a 2x8 lego`)).not.toBeVisible()
+    await expect(page.getByText(`a 2x4 lego`)).toBeVisible()
+
+    // Ensure you can copy the code for the final model.
+    await expect(copyToClipboardButton).toBeVisible()
+    // Click the button.
+    await copyToClipboardButton.click()
+
+    // Expect the code to be pasted.
+    const code2x4 = await page.locator('.cm-content').innerText()
+    await expect(code2x4.length).toBeGreaterThan(249)
+  })
+
   test('can do many at once with errors, clicking dismiss error does not dismiss all', async ({
     page,
     homePage,
@@ -573,6 +675,82 @@ async function sendPromptFromCommandBarAndSetExistingProject(
   })
 }
 
+test(
+  'Text-to-CAD functionality',
+  { tag: '@electron' },
+  async ({ context, page, cmdBar }, testInfo) => {
+    const projectName = 'project-000'
+    const prompt = 'lego 2x4'
+    const textToCadFileName = 'lego-2x4.kcl'
+
+    const { dir } = await context.folderSetupFn(async () => {})
+
+    const fileExists = () =>
+      fs.existsSync(join(dir, projectName, textToCadFileName))
+
+    const { openFilePanel, openKclCodePanel, waitForPageLoad } = await getUtils(
+      page,
+      test
+    )
+
+    await page.setBodyDimensions({ width: 1200, height: 500 })
+
+    // Locators
+    const projectMenuButton = page
+      .getByTestId('project-sidebar-toggle')
+      .filter({ hasText: projectName })
+    const textToCadFileButton = page.getByRole('listitem').filter({
+      has: page.getByRole('button', { name: textToCadFileName }),
+    })
+    const textToCadComment = page.getByText(
+      `// Generated by Text-to-CAD: ${prompt}`
+    )
+
+    // Create and navigate to the project
+    await createProject({ name: 'project-000', page })
+
+    // Wait for Start Sketch otherwise you will not have access Text-to-CAD command
+    await waitForPageLoad()
+    await openFilePanel()
+    await openKclCodePanel()
+
+    await test.step(`Test file creation`, async () => {
+      await sendPromptFromCommandBarAndSetExistingProject(
+        page,
+        prompt,
+        cmdBar,
+        projectName
+      )
+      // File is considered created if it shows up in the Project Files pane
+      await expect(textToCadFileButton).toBeVisible({ timeout: 20_000 })
+      expect(fileExists()).toBeTruthy()
+    })
+
+    await test.step(`Test file navigation`, async () => {
+      await expect(projectMenuButton).toContainText('main.kcl')
+      await textToCadFileButton.click()
+      // File can be navigated and loaded assuming a specific KCL comment is loaded into the KCL code pane
+      await expect(textToCadComment).toBeVisible({ timeout: 20_000 })
+      await expect(projectMenuButton).toContainText(textToCadFileName)
+    })
+
+    await test.step(`Test file deletion on rejection`, async () => {
+      const rejectButton = page.getByRole('button', { name: 'Reject' })
+      // A file is created and can be navigated to while this prompt is still opened
+      // Click the "Reject" button within the prompt and it will delete the file.
+      await rejectButton.click()
+
+      const submittingToastMessage = page.getByText(
+        `Successfully deleted file "lego-2x4.kcl"`
+      )
+      await expect(submittingToastMessage).toBeVisible()
+      expect(fileExists()).toBeFalsy()
+      // Confirm we've navigated back to the main.kcl file after deletion
+      await expect(projectMenuButton).toContainText('main.kcl')
+    })
+  }
+)
+
 /**
  * Below there are twelve (12) tests for testing the navigation and file creation
  * logic around text to cad. The Text to CAD command is now globally available
@@ -806,12 +984,12 @@ test.describe('Mocked Text-to-CAD API tests', { tag: ['@skipWin'] }, () => {
       )
       await expect(page.getByTestId('app-header-file-name')).toBeVisible()
       await expect(page.getByTestId('app-header-file-name')).toContainText(
-        'main.kcl'
+        '2x2x2-cube.kcl'
       )
 
       await u.openFilePanel()
       await expect(
-        page.getByTestId('file-tree-item').getByText('2x2x2-cube')
+        page.getByTestId('file-tree-item').getByText('2x2x2-cube.kcl')
       ).toBeVisible()
     }
   )
@@ -1006,13 +1184,13 @@ test.describe('Mocked Text-to-CAD API tests', { tag: ['@skipWin'] }, () => {
       )
       await expect(page.getByTestId('app-header-file-name')).toBeVisible()
       await expect(page.getByTestId('app-header-file-name')).toContainText(
-        'main.kcl'
+        '2x2x2-cube.kcl'
       )
 
       // Check file is created
       await u.openFilePanel()
       await expect(
-        page.getByTestId('file-tree-item').getByText('2x2x2-cube')
+        page.getByTestId('file-tree-item').getByText('2x2x2-cube.kcl')
       ).toBeVisible()
     }
   )
@@ -1298,13 +1476,13 @@ test.describe('Mocked Text-to-CAD API tests', { tag: ['@skipWin'] }, () => {
       )
       await expect(page.getByTestId('app-header-file-name')).toBeVisible()
       await expect(page.getByTestId('app-header-file-name')).toContainText(
-        'main.kcl'
+        '2x2x2-cube.kcl'
       )
 
       // Check file is created
       await u.openFilePanel()
       await expect(
-        page.getByTestId('file-tree-item').getByText('2x2x2-cube')
+        page.getByTestId('file-tree-item').getByText('2x2x2-cube.kcl')
       ).toBeVisible()
       await expect(
         page.getByTestId('file-tree-item').getByText('main.kcl')

e2e/playwright/various.spec.ts

@@ -573,7 +573,6 @@ profile001 = startProfile(sketch002, at = [-12.34, 12.34])
   await expect(page.getByTestId('command-bar')).toBeVisible()
   await page.waitForTimeout(100)
 
-  await cmdBar.progressCmdBar()
   await cmdBar.progressCmdBar()
   await expect(page.getByText('Confirm Extrude')).toBeVisible()
   await cmdBar.progressCmdBar()

index.html

@@ -16,6 +16,7 @@
     <link rel="apple-touch-icon" href="/logo192.png" />
     <link rel="manifest" href="/manifest.json" />
     <link rel="stylesheet" href="./inter/inter.css" />
+    <link rel="stylesheet" href="https://use.typekit.net/zzv8rvm.css" />
     <script
       defer
       data-domain="app.zoo.dev"

package-lock.json

@@ -2492,7 +2492,6 @@
     },
     "node_modules/@clack/prompts/node_modules/is-unicode-supported": {
       "version": "1.3.0",
-      "extraneous": true,
       "inBundle": true,
       "license": "MIT",
       "engines": {

public/announce_release.py

@@ -27,7 +27,7 @@ if len(modified_release_body) > max_length:
 # Message to send to Discord
 data = {
     "content": textwrap.dedent(f'''
-        **{release_version}** is now available! Check out the latest features and improvements here: <https://zoo.dev/design-studio>
+        **{release_version}** is now available! Check out the latest features and improvements here: <https://zoo.dev/modeling-app/download>
 
         {modified_release_body}
     '''),

public/kcl-samples/README.md

@@ -37,8 +37,6 @@ When you submit a PR to add or modify KCL samples, images will be generated and
 [![bottle](screenshots/bottle.png)](bottle/main.kcl)
 #### [bracket](bracket/main.kcl) ([screenshot](screenshots/bracket.png))
 [![bracket](screenshots/bracket.png)](bracket/main.kcl)
-#### [brake-rotor](brake-rotor/main.kcl) ([screenshot](screenshots/brake-rotor.png))
-[![brake-rotor](screenshots/brake-rotor.png)](brake-rotor/main.kcl)
 #### [car-wheel-assembly](car-wheel-assembly/main.kcl) ([screenshot](screenshots/car-wheel-assembly.png))
 [![car-wheel-assembly](screenshots/car-wheel-assembly.png)](car-wheel-assembly/main.kcl)
 #### [cold-plate](cold-plate/main.kcl) ([screenshot](screenshots/cold-plate.png))
@@ -143,14 +141,10 @@ When you submit a PR to add or modify KCL samples, images will be generated and
 [![spur-reduction-gearset](screenshots/spur-reduction-gearset.png)](spur-reduction-gearset/main.kcl)
 #### [surgical-drill-guide](surgical-drill-guide/main.kcl) ([screenshot](screenshots/surgical-drill-guide.png))
 [![surgical-drill-guide](screenshots/surgical-drill-guide.png)](surgical-drill-guide/main.kcl)
-#### [telemetry-antenna](telemetry-antenna/main.kcl) ([screenshot](screenshots/telemetry-antenna.png))
-[![telemetry-antenna](screenshots/telemetry-antenna.png)](telemetry-antenna/main.kcl)
 #### [thermal-block-insert](thermal-block-insert/main.kcl) ([screenshot](screenshots/thermal-block-insert.png))
 [![thermal-block-insert](screenshots/thermal-block-insert.png)](thermal-block-insert/main.kcl)
 #### [tooling-nest-block](tooling-nest-block/main.kcl) ([screenshot](screenshots/tooling-nest-block.png))
 [![tooling-nest-block](screenshots/tooling-nest-block.png)](tooling-nest-block/main.kcl)
-#### [truss-structure](truss-structure/main.kcl) ([screenshot](screenshots/truss-structure.png))
-[![truss-structure](screenshots/truss-structure.png)](truss-structure/main.kcl)
 #### [utility-sink](utility-sink/main.kcl) ([screenshot](screenshots/utility-sink.png))
 [![utility-sink](screenshots/utility-sink.png)](utility-sink/main.kcl)
 #### [walkie-talkie](walkie-talkie/main.kcl) ([screenshot](screenshots/walkie-talkie.png))

public/kcl-samples/brake-rotor/main.kcl

@@ -1,180 +0,0 @@
-// Brake Rotor
-// A 320mm vented brake disc (rotor), with straight vanes, 30mm thick. The disc bell should accommodate 5 M12 wheel studs on a 114.3mm pitch circle diameter.
-
-
-
-
-@settings(defaultLengthUnit = mm)
-
-// Define parameters.
-dDisc = 320
-dPitchCircle = 114.3
-dBore = 64
-nStuds = 5
-dStudDrilling = 12.5 // M12
-hFrictionSurface = 60
-tDiscHalf = 10
-
-// Vent parameters.
-tVent = 10
-wVent = 6
-rVentFillet = 2
-nVentBosses = 36
-
-// Drilling parameters.
-dDrillDia = 6
-aBase = 90
-aSweep = 30
-nArcs = 12
-
-// Bell parameters.
-aDraftBell = 5
-tBell = 5 // Wall thickness.
-hBellAboveDiscFace = 40
-hBellSubflush = 4
-wUndercut = 8
-
-fn drillHole(activeSketch, t) {
-  // Sketch a vent hole at line parameter value t on an arc drawn across the disc surface.
-  rInner = dDisc / 2 - hFrictionSurface
-  rOuter = dDisc / 2
-
-  aStart = aBase
-  aEnd = aBase - aSweep
-
-  // Linear interpolation of radius.
-  rCurrent = rInner + t * (rOuter - rInner)
-
-  // Linear interpolation of angle.
-  aCurrent = aStart + t * (aEnd - aStart)
-
-  // Calculate position.
-  xCenter = rCurrent * cos(aCurrent)
-  yCenter = rCurrent * sin(aCurrent)
-
-  // Draw.
-  drillCircle = circle(activeSketch, center = [xCenter, yCenter], radius = dDrillDia / 2)
-  return drillCircle
-}
-
-fn createDiscHalf(plane, dDiscParam, hFrictionSurfaceParam, tDiscHalfParam) {
-  // Create a disc half with a vent hole pattern.
-  sketchFace = startSketchOn(plane)
-  profileFace = circle(sketchFace, center = [0, 0], radius = dDiscParam / 2)
-    |> subtract2d(tool = circle(sketchFace, center = [0, 0], radius = dDiscParam / 2 - hFrictionSurfaceParam))
-
-  // Create three circles at t = 0, 0.5, and 1
-  hole1 = drillHole(activeSketch = sketchFace, t = 0.2)
-  hole2 = drillHole(activeSketch = sketchFace, t = 0.5)
-  hole3 = drillHole(activeSketch = sketchFace, t = 0.8)
-
-  // Pattern and cut.
-  holes = patternCircular2d(
-    [hole1, hole2, hole3],
-    instances = nArcs,
-    center = [0, 0],
-    arcDegrees = 360,
-    rotateDuplicates = true,
-  )
-  profileDrilled = subtract2d(profileFace, tool = holes)
-
-  // Extrude.
-  discHalf = extrude(profileFace, length = tDiscHalfParam)
-  return discHalf
-}
-
-// ---------------------------------------------------------------------------------------------------------------------
-
-// Create inboard half.
-discInboard = createDiscHalf(
-  plane = XY,
-  dDiscParam = dDisc,
-  hFrictionSurfaceParam = hFrictionSurface,
-  tDiscHalfParam = tDiscHalf,
-)
-
-// Create vents.
-planeVent = offsetPlane(XY, offset = tDiscHalf)
-sketchVent = startSketchOn(planeVent)
-profileVent = startProfile(sketchVent, at = [-wVent, dDisc / 2])
-  |> angledLine(angle = 0, length = wVent, tag = $rectangleSegmentA001)
-  |> angledLine(angle = segAng(rectangleSegmentA001) - 90, length = hFrictionSurface, tag = $seg02)
-  |> angledLine(angle = segAng(rectangleSegmentA001), length = -segLen(rectangleSegmentA001), tag = $seg03)
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)], tag = $seg01)
-  |> close()
-
-ventPad = extrude(profileVent, length = tVent)
-  |> fillet(
-       radius = rVentFillet,
-       tags = [
-         getCommonEdge(faces = [seg01, rectangleSegmentA001]),
-         getCommonEdge(faces = [seg02, rectangleSegmentA001]),
-         getCommonEdge(faces = [seg01, seg03]),
-         getCommonEdge(faces = [seg03, seg02])
-       ],
-     )
-ventSet = patternCircular3d(
-  ventPad,
-  instances = nVentBosses,
-  axis = [0, 0, 1],
-  center = [0, 0, tDiscHalf],
-  arcDegrees = 360,
-  rotateDuplicates = true,
-)
-
-// Create outboard half.
-planeOutboard = offsetPlane(XY, offset = tDiscHalf + tVent)
-discOutboard = createDiscHalf(
-  plane = planeOutboard,
-  dDiscParam = dDisc,
-  hFrictionSurfaceParam = hFrictionSurface,
-  tDiscHalfParam = tDiscHalf,
-)
-
-// Now create bell.
-rCenter = dDisc / 2 - hFrictionSurface - wUndercut
-rBore = dBore / 2
-lDraftExterior = hBellAboveDiscFace / tan(90 - aDraftBell)
-lDraftInterior = (hBellAboveDiscFace - tBell) / tan(90 - aDraftBell)
-
-// Inner and outer radius of outboard face of disc bell.
-rOuter = rCenter - lDraftExterior - rBore
-rInner = rOuter + lDraftExterior - (tBell + lDraftInterior)
-
-sketchDiscBell = startSketchOn(-YZ)
-bodyDiscBell = startProfile(
-       sketchDiscBell,
-       at = [
-         -dDisc / 2 + hFrictionSurface,
-         tDiscHalf * 2 + tVent
-       ],
-     )
-  |> arc(
-       %,
-       angleStart = -180,
-       angleEnd = 0,
-       radius = wUndercut / 2,
-     )
-  |> line(end = [lDraftExterior, hBellAboveDiscFace])
-  |> xLine(length = rOuter, tag = $seg04)
-  |> yLine(length = -tBell)
-  |> xLine(length = -rInner)
-  |> line(end = [-lDraftInterior, -hBellAboveDiscFace])
-  |> line(end = [0, -2]) // Wall thickness.
-  |> xLine(length = -1 * (tBell + wUndercut))
-  |> close(%)
-  |> revolve(axis = Y)
-
-// Drill lug holes.
-sketchLugs = startSketchOn(bodyDiscBell, face = seg04)
-profileStud = circle(sketchLugs, center = [0, dPitchCircle / 2], radius = dStudDrilling / 2)
-  |> patternCircular2d(
-       %,
-       instances = nStuds,
-       center = [0, 0],
-       arcDegrees = 360,
-       rotateDuplicates = true,
-     )
-
-clearance = 2 // Some margin on negative extrude.
-lugs = extrude(profileStud, length = -1 * (tBell + clearance))

public/kcl-samples/manifest.json

@@ -74,16 +74,6 @@
       "main.kcl"
     ]
   },
-  {
-    "file": "main.kcl",
-    "pathFromProjectDirectoryToFirstFile": "brake-rotor/main.kcl",
-    "multipleFiles": false,
-    "title": "Brake Rotor",
-    "description": "A 320mm vented brake disc (rotor), with straight vanes, 30mm thick. The disc bell should accommodate 5 M12 wheel studs on a 114.3mm pitch circle diameter.",
-    "files": [
-      "main.kcl"
-    ]
-  },
   {
     "file": "main.kcl",
     "pathFromProjectDirectoryToFirstFile": "car-wheel-assembly/main.kcl",
@@ -632,16 +622,6 @@
       "main.kcl"
     ]
   },
-  {
-    "file": "main.kcl",
-    "pathFromProjectDirectoryToFirstFile": "telemetry-antenna/main.kcl",
-    "multipleFiles": false,
-    "title": "Aircraft telemetry antenna plate",
-    "description": "Consists of a circular base plate 3 inches in diameter and 0.08 inches thick, with a tapered monopole antenna mounted at the top with a base diameter of 0.65 inches and height of 1.36 inches. Also consists of a mounting base and connector at the bottom of the plate. The plate also has 6 countersunk holes at a defined pitch circle diameter.",
-    "files": [
-      "main.kcl"
-    ]
-  },
   {
     "file": "main.kcl",
     "pathFromProjectDirectoryToFirstFile": "thermal-block-insert/main.kcl",
@@ -662,16 +642,6 @@
       "main.kcl"
     ]
   },
-  {
-    "file": "main.kcl",
-    "pathFromProjectDirectoryToFirstFile": "truss-structure/main.kcl",
-    "multipleFiles": false,
-    "title": "Truss Structure",
-    "description": "A truss structure is a framework composed of triangular units made from straight members connected at joints, often called nodes. Trusses are widely used in architecture, civil engineering, and construction for their ability to support large loads with minimal material.",
-    "files": [
-      "main.kcl"
-    ]
-  },
   {
     "file": "main.kcl",
     "pathFromProjectDirectoryToFirstFile": "utility-sink/main.kcl",

public/kcl-samples/pdu-faceplate/main.kcl

@@ -72,25 +72,25 @@ leftSpacerShape = boxModuleFn(width = leftSpacerWidth)
 
 // Module for power switch including front plate and red rocker button
 switchPosition = leftSpacerPosition + leftSpacerWidth / 2 + moduleWidth / 2
-switchWidth = moduleWidth
+swtichWidth = moduleWidth
 
 // Switch Body
 switchBody = boxModuleFn(width = moduleWidth)
 
 // Switch Plate
-switchPlateWidth = 20
+swtichPlateWidth = 20
 switchPlateHeight = 30
 switchPlateThickness = 3
 switchPlateShape = startSketchOn(switchBody, face = END)
   |> startProfile(
        %,
        at = [
-         -switchPlateWidth / 2,
+         -swtichPlateWidth / 2,
          -switchPlateHeight / 2
        ],
      )
   |> yLine(length = switchPlateHeight)
-  |> xLine(length = switchPlateWidth)
+  |> xLine(length = swtichPlateWidth)
   |> yLine(length = -switchPlateHeight)
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
@@ -104,8 +104,8 @@ switchPlateBody = extrude(switchPlateShape, length = switchPlateThickness)
 
 // Switch Button
 switchButtonHeight = 26
-switchButtonWidth = 15
-switchButtonShape = startSketchOn(offsetPlane(-YZ, offset = -switchButtonWidth / 2))
+swtichButtonWidth = 15
+switchButtonShape = startSketchOn(offsetPlane(-YZ, offset = -swtichButtonWidth / 2))
   |> startProfile(
        %,
        at = [
@@ -121,7 +121,7 @@ switchButtonShape = startSketchOn(offsetPlane(-YZ, offset = -switchButtonWidth /
      ])
   |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-switchButtonBody = extrude(switchButtonShape, length = switchButtonWidth)
+switchButtonBody = extrude(switchButtonShape, length = swtichButtonWidth)
   |> translate(
        %,
        x = switchPosition,
@@ -132,7 +132,7 @@ switchButtonBody = extrude(switchButtonShape, length = switchButtonWidth)
 
 // Spacer between switch and plug modules for layout alignment
 secondSpacerWidth = moduleWidth / 2
-secondSpacerPosition = switchPosition + switchWidth / 2 + secondSpacerWidth / 2
+secondSpacerPosition = switchPosition + swtichWidth / 2 + secondSpacerWidth / 2
 secondSpacerBody = boxModuleFn(width = secondSpacerWidth)
   |> translate(
        %,

public/kcl-samples/prosthetic-hip/main.kcl

@@ -33,9 +33,14 @@ stemLoftProfile2 = startSketchOn(offsetPlane(XY, offset = 75))
 // Draw the third profile for the lofted femur
 p3Z = 110
 p3A = 25
+plane003 = {
+  origin = [0, 0.0, p3Z],
+  xAxis = [cos(p3A), 0, sin(p3A)],
+  yAxis = [0.0, 1.0, 0.0]
+}
 l3 = 32
 r3 = 4
-stemLoftProfile3 = startSketchOn(XY)
+stemLoftProfile3 = startSketchOn(plane003)
   |> startProfile(at = [-15.5, -l3 / 2])
   |> yLine(length = l3, tag = $seg03)
   |> tangentialArc(angle = -120, radius = r3)
@@ -44,14 +49,18 @@ stemLoftProfile3 = startSketchOn(XY)
   |> angledLine(angle = 30, length = -segLen(seg03))
   |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-  |> translate(z = p3Z)
-  |> rotate(pitch = -p3A)
+
 // Draw the fourth profile for the lofted femur
 p4Z = 130
 p4A = 36.5
+plane004 = {
+  origin = [0, 0.0, p4Z],
+  xAxis = [cos(p4A), 0, sin(p4A)],
+  yAxis = [0.0, 1.0, 0.0]
+}
 l4 = 16
 r4 = 5
-stemLoftProfile4 = startSketchOn(XY)
+stemLoftProfile4 = startSketchOn(plane004)
   |> startProfile(at = [-23, -l4 / 2])
   |> yLine(length = l4, tag = $seg04)
   |> tangentialArc(angle = -120, radius = r4)
@@ -60,14 +69,18 @@ stemLoftProfile4 = startSketchOn(XY)
   |> angledLine(angle = 30, length = -segLen(seg04))
   |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-  |> translate(z = p4Z)
-  |> rotate(pitch = -p4A)
+
 // Draw the first profile for the femoral stem
 p5Z = 140
 p5A = 36.5
+plane005 = {
+  origin = [0, 0.0, p5Z],
+  xAxis = [cos(p5A), 0, sin(p5A)],
+  yAxis = [0.0, 1.0, 0.0]
+}
 l5 = 1.6
 r5 = 1.6
-stemLoftProfile5 = startSketchOn(XY)
+stemLoftProfile5 = startSketchOn(plane005)
   |> startProfile(at = [-19.5, -l5 / 2])
   |> yLine(length = l5, tag = $seg05)
   |> tangentialArc(angle = -120, radius = r5)
@@ -76,14 +89,18 @@ stemLoftProfile5 = startSketchOn(XY)
   |> angledLine(angle = 30, length = -segLen(seg05))
   |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-  |> translate(z = p5Z)
-  |> rotate(pitch = -p5A)
+
 // Draw the second profile for the femoral stem
 p6Z = 145
 p6A = 36.5
+plane006 = {
+  origin = [0, 0.0, p6Z],
+  xAxis = [cos(p6A), 0, sin(p6A)],
+  yAxis = [0.0, 1.0, 0.0]
+}
 l6 = 1
 r6 = 3
-stemLoftProfile6 = startSketchOn(XY)
+stemLoftProfile6 = startSketchOn(plane006)
   |> startProfile(at = [-23.4, -l6 / 2])
   |> yLine(length = l6, tag = $seg06)
   |> tangentialArc(angle = -120, radius = r6)
@@ -92,24 +109,27 @@ stemLoftProfile6 = startSketchOn(XY)
   |> angledLine(angle = 30, length = -segLen(seg06))
   |> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
   |> close()
-  |> translate(z = p6Z)
-  |> rotate(pitch = -p6A)
+
+// Draw the third profile for the femoral stem
+stemTab = clone(stemLoftProfile6)
+  |> extrude(%, length = 6)
+
 // Loft the femur using all profiles in sequence
+
 femur = loft([
   stemLoftProfile1,
   stemLoftProfile2,
   stemLoftProfile3,
   stemLoftProfile4
 ])
+
 // Loft the femoral stem
 femoralStem = loft([
   clone(stemLoftProfile4),
   stemLoftProfile5,
-  clone(stemLoftProfile6)
+  stemLoftProfile6
 ])
-// Draw the third profile for the femoral stem
-stemTab = stemLoftProfile6
-  |> extrude(length = 6)
+
 // Revolve a hollow socket to represent the femoral head
 femoralHead = startSketchOn(XZ)
   |> startProfile(at = [4, 0])

public/kcl-samples/spinning-highrise-tower/main.kcl

@@ -53,8 +53,8 @@ baseSlab = boxFn(plane = XY, width = slabWidth, height = -baseThickness)
   |> appearance(%, color = "#dbd7d2")
 
 // Create ground platform beneath the base
-groundSize = 50
-groundBody = boxFn(plane = offsetPlane(XY, offset = -baseThickness), width = groundSize, height = -5)
+goundSize = 50
+groundBody = boxFn(plane = offsetPlane(XY, offset = -baseThickness), width = goundSize, height = -5)
   |> appearance(%, color = "#3a3631")
 
 // Create a single slab with handrail height to be reused with pattern

public/kcl-samples/telemetry-antenna/main.kcl

@@ -1,63 +0,0 @@
-// Aircraft telemetry antenna plate
-// Consists of a circular base plate 3 inches in diameter and 0.08 inches thick, with a tapered monopole antenna mounted at the top with a base diameter of 0.65 inches and height of 1.36 inches. Also consists of a mounting base and connector at the bottom of the plate. The plate also has 6 countersunk holes at a defined pitch circle diameter.
-
-// Set units
-@settings(defaultLengthUnit = in)
-
-// Define parameters
-plateThickness = 0.08
-plateDia = 3
-antennaBaseDia = 0.65
-antennaAngle = 95
-antennaHeight = 1.36
-seatingDia = 0.625
-totalHeight = 2.14
-
-boltDiameter = .196
-boltPitchCircleDiameter = 2.5
-
-// 2D cross-sectional profile of the part that will later be revolved
-antennaCrossSectionSketch = startSketchOn(YZ)
-antennaCrossSectionProfile = startProfile(antennaCrossSectionSketch, at = [plateDia / 2, 0])
-  |> yLine(length = plateThickness)
-  |> xLine(length = -(plateDia - antennaBaseDia) / 2, tag = $seg03)
-  |> angledLine(angle = antennaAngle, length = 1.1, tag = $seg01)
-  |> tangentialArc(endAbsolute = [0.025, antennaHeight])
-  |> xLine(endAbsolute = 0, tag = $seg02)
-  |> yLine(length = -totalHeight)
-  |> xLine(length = .25)
-  |> yLine(length = .05)
-  |> angledLine(angle = 45, length = 0.025)
-  |> yLine(length = .125)
-  |> angledLine(angle = 135, length = 0.025)
-  |> yLine(length = .125)
-  |> xLine(length = .025)
-  |> yLine(length = .025)
-  |> xLine(endAbsolute = seatingDia / 2)
-  |> yLine(endAbsolute = -0.25)
-  |> xLine(endAbsolute = 0.6)
-  |> yLine(endAbsolute = 0)
-  |> close()
-
-// Revolution about y-axis of earlier profile
-antennaCrossSectionRevolve = revolve(antennaCrossSectionProfile, angle = 360, axis = Y)
-
-// Function to create a countersunk hole
-fn countersink(@holePosition) {
-  startSketchOn(antennaCrossSectionRevolve, face = seg03)
-    |> circle(center = holePosition, radius = boltDiameter / 2, tag = $hole01)
-    |> extrude(length = -plateThickness)
-    |> chamfer(length = 0.04, tags = [hole01])
-  return {  }
-}
-
-// PCD converted to radius for positioning the holes
-r = boltPitchCircleDiameter / 2
-
-// 6 countersunk holes using the countersink function
-countersink([r, 0]) // 0 °
-countersink([r * 0.5, r * 0.8660254]) // 60 °
-countersink([-r * 0.5, r * 0.8660254]) // 120 °
-countersink([-r, 0]) // 180 °
-countersink([-r * 0.5, -r * 0.8660254]) // 240 °
-countersink([r * 0.5, -r * 0.8660254]) // 300 °

public/kcl-samples/truss-structure/main.kcl

@@ -1,142 +0,0 @@
-// Truss Structure
-// A truss structure is a framework composed of triangular units made from straight members connected at joints, often called nodes. Trusses are widely used in architecture, civil engineering, and construction for their ability to support large loads with minimal material.
-
-
-
-
-@settings(defaultLengthUnit = in)
-
-// Define parameters
-thickness = 4
-totalLength = 180
-totalWidth = 120
-totalHeight = 120
-legHeight = 48
-topTrussAngle = 25
-beamWidth = 4
-beamLength = 2
-sparAngle = 30
-nFrames = 3
-crossBeamLength = 82
-
-// Sketch the top frame
-topFrameSketch = startSketchOn(YZ)
-profile001 = startProfile(topFrameSketch, at = [totalWidth / 2, 0])
-  |> xLine(length = -totalWidth, tag = $bottomFace)
-  |> yLine(length = 12)
-  |> angledLine(angle = topTrussAngle, endAbsoluteX = 0, tag = $tag001)
-  |> angledLine(angle = -topTrussAngle, endAbsoluteX = totalWidth / 2, tag = $tag002)
-  |> close()
-
-// Create two holes in the top frame sketch to create the center beam
-profile002 = startProfile(topFrameSketch, at = [totalWidth / 2 - thickness, thickness])
-  |> xLine(endAbsolute = thickness / 2)
-  |> yLine(endAbsolute = segEndY(tag001) - thickness)
-  |> angledLine(endAbsoluteX = profileStartX(%), angle = -topTrussAngle)
-  |> close(%)
-
-profile003 = startProfile(topFrameSketch, at = [-totalWidth / 2 + thickness, thickness])
-  |> xLine(endAbsolute = -thickness / 2)
-  |> yLine(endAbsolute = segEndY(tag001) - thickness)
-  |> angledLine(endAbsoluteX = profileStartX(%), angle = 180 + topTrussAngle)
-  |> close(%)
-profile004 = subtract2d(profile001, tool = profile002)
-subtract2d(profile001, tool = profile003)
-
-// Extrude the sketch to make the top frame
-topFrame = extrude(profile001, length = beamLength)
-
-// Spar 1
-sketch002 = startSketchOn(offsetPlane(YZ, offset = .1))
-profile006 = startProfile(sketch002, at = [thickness / 2 - 1, 14])
-  |> angledLine(angle = sparAngle, length = 25)
-  |> angledLine(angle = -topTrussAngle, length = 5)
-  |> angledLine(angle = 180 + sparAngle, endAbsoluteX = profileStartX(%))
-  |> close(%)
-
-spar001 = extrude(profile006, length = 1.8)
-
-// Spar2
-profile007 = startProfile(sketch002, at = [-thickness / 2 + 1, 14])
-  |> angledLine(angle = 180 - sparAngle, length = 25)
-  |> angledLine(angle = 180 + topTrussAngle, length = 5)
-  |> angledLine(angle = -sparAngle, endAbsoluteX = profileStartX(%))
-  |> close(%)
-
-spar002 = extrude(profile007, length = 1.8)
-
-// Combine the top frame with the intermediate support beams
-newFrame = topFrame + spar001 + spar002
-
-// Create the two legs on the frame
-leg001Sketch = startSketchOn(offsetPlane(XY, offset = .1))
-legProfile001 = startProfile(leg001Sketch, at = [0, -totalWidth / 2])
-  |> xLine(%, length = beamLength - .1)
-  |> yLine(%, length = beamWidth - 1)
-  |> xLine(%, endAbsolute = profileStartX(%))
-  |> close(%)
-
-legProfile002 = startProfile(leg001Sketch, at = [0, totalWidth / 2])
-  |> xLine(%, length = beamLength - .1)
-  |> yLine(%, length = -(beamWidth - 1))
-  |> xLine(%, endAbsolute = profileStartX(%))
-  |> close(%)
-leg001 = extrude(legProfile001, length = -legHeight - .1)
-leg002 = extrude(legProfile002, length = -legHeight - .1)
-
-// Combine the top frame with the legs and pattern
-fullFrame = newFrame + leg001 + leg002
-  |> patternLinear3d(
-       %,
-       instances = nFrames,
-       distance = crossBeamLength + beamLength,
-       axis = [-1, 0, 0],
-     )
-
-// Create the center cross beam
-centerCrossBeamSketch = startSketchOn(YZ)
-profile005 = startProfile(centerCrossBeamSketch, at = [0, segEndY(tag001) - 1])
-  |> angledLine(%, angle = -topTrussAngle, length = beamWidth * 3 / 8)
-  |> yLine(length = -beamWidth * 3 / 8)
-  |> angledLine(%, angle = 180 - topTrussAngle, length = beamWidth * 3 / 8)
-  |> angledLine(%, angle = 180 + topTrussAngle, length = beamWidth * 3 / 8)
-  |> yLine(length = beamWidth * 3 / 8)
-  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
-  |> close()
-
-// Extrude the center cross beam and pattern to every frame
-centerCrossBeam = extrude(profile005, length = -crossBeamLength)
-  |> patternLinear3d(
-       %,
-       instances = nFrames - 1,
-       distance = crossBeamLength + beamLength,
-       axis = [-1, 0, 0],
-     )
-
-// Create the two side cross beams
-sideCrossBeamSketch = startSketchOn(-YZ)
-profile008 = startProfile(
-       sideCrossBeamSketch,
-       at = [
-         -totalWidth / 2 + 0.5,
-         segEndY(tag002) - .5
-       ],
-     )
-  |> yLine(length = -beamLength)
-  |> xLine(length = 3 / 4 * beamWidth)
-  |> yLine(length = beamLength)
-  |> close()
-profile009 = startProfile(sideCrossBeamSketch, at = [totalWidth / 2, segEndY(tag002) - .5])
-  |> yLine(length = -beamLength)
-  |> xLine(%, length = -3 / 4 * beamWidth)
-  |> yLine(%, length = beamLength)
-  |> close(%)
-
-// Extrude the side cross beams and pattern to every frame.
-extrude([profile008, profile009], length = crossBeamLength)
-  |> patternLinear3d(
-       %,
-       instances = nFrames - 1,
-       distance = crossBeamLength + beamLength,
-       axis = [-1, 0, 0],
-     )

rust/Cargo.lock

@@ -1815,7 +1815,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-bumper"
-version = "0.1.76"
+version = "0.1.74"
 dependencies = [
  "anyhow",
  "clap",
@@ -1826,7 +1826,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-derive-docs"
-version = "0.1.76"
+version = "0.1.74"
 dependencies = [
  "Inflector",
  "anyhow",
@@ -1845,7 +1845,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-directory-test-macro"
-version = "0.1.76"
+version = "0.1.74"
 dependencies = [
  "convert_case",
  "proc-macro2",
@@ -1855,7 +1855,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-language-server"
-version = "0.2.76"
+version = "0.2.74"
 dependencies = [
  "anyhow",
  "clap",
@@ -1876,7 +1876,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-language-server-release"
-version = "0.1.76"
+version = "0.1.74"
 dependencies = [
  "anyhow",
  "clap",
@@ -1896,7 +1896,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-lib"
-version = "0.2.76"
+version = "0.2.74"
 dependencies = [
  "anyhow",
  "approx 0.5.1",
@@ -1973,7 +1973,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-python-bindings"
-version = "0.3.76"
+version = "0.3.74"
 dependencies = [
  "anyhow",
  "kcl-lib",
@@ -1988,7 +1988,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-test-server"
-version = "0.1.76"
+version = "0.1.74"
 dependencies = [
  "anyhow",
  "hyper 0.14.32",
@@ -2001,7 +2001,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-to-core"
-version = "0.1.76"
+version = "0.1.74"
 dependencies = [
  "anyhow",
  "async-trait",
@@ -2015,7 +2015,7 @@ dependencies = [
 
 [[package]]
 name = "kcl-wasm-lib"
-version = "0.1.76"
+version = "0.1.74"
 dependencies = [
  "anyhow",
  "bson",

rust/justfile

@@ -36,20 +36,20 @@ new-sim-test test_name render_to_png="true":
 
 # Run a KCL deterministic simulation test case and accept output.
 overwrite-sim-test-sample test_name:
-    ZOO_SIM_UPDATE=always EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} {{kcl_lib_flags}} --no-quiet -- simulation_tests::kcl_samples::parse_{{test_name}}
-    ZOO_SIM_UPDATE=always EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} {{kcl_lib_flags}} --no-quiet -- simulation_tests::kcl_samples::unparse_{{test_name}}
-    ZOO_SIM_UPDATE=always EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} {{kcl_lib_flags}} --no-quiet -- simulation_tests::kcl_samples::kcl_test_execute_{{test_name}}
-    ZOO_SIM_UPDATE=always EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} {{kcl_lib_flags}} --no-quiet -- simulation_tests::kcl_samples::test_after_engine
+    EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} {{kcl_lib_flags}} --no-quiet -- simulation_tests::kcl_samples::parse_{{test_name}}
+    EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} {{kcl_lib_flags}} --no-quiet -- simulation_tests::kcl_samples::unparse_{{test_name}}
+    EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} {{kcl_lib_flags}} --no-quiet -- simulation_tests::kcl_samples::kcl_test_execute_{{test_name}}
+    EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} {{kcl_lib_flags}} --no-quiet -- simulation_tests::kcl_samples::test_after_engine
 
 overwrite-sim-test test_name:
-    ZOO_SIM_UPDATE=always EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} {{kcl_lib_flags}} --no-quiet -- simulation_tests::{{test_name}}::parse
-    ZOO_SIM_UPDATE=always EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} {{kcl_lib_flags}} --no-quiet -- simulation_tests::{{test_name}}::unparse
-    ZOO_SIM_UPDATE=always EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} {{kcl_lib_flags}} --no-quiet -- simulation_tests::{{test_name}}::kcl_test_execute
-    [ {{test_name}} != "kcl_samples" ] || ZOO_SIM_UPDATE=always EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} {{kcl_lib_flags}} --no-quiet -- simulation_tests::{{test_name}}::test_after_engine
+    EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} {{kcl_lib_flags}} --no-quiet -- simulation_tests::{{test_name}}::parse
+    EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} {{kcl_lib_flags}} --no-quiet -- simulation_tests::{{test_name}}::unparse
+    EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} {{kcl_lib_flags}} --no-quiet -- simulation_tests::{{test_name}}::kcl_test_execute
+    [ {{test_name}} != "kcl_samples" ] || EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} {{kcl_lib_flags}} --no-quiet -- simulation_tests::{{test_name}}::test_after_engine
 
 # Regenerate all the simulation test output.
 redo-sim-tests:
-    ZOO_SIM_UPDATE=always EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} {{kcl_lib_flags}} --no-quiet -- simulation_tests
+    EXPECTORATE=overwrite TWENTY_TWENTY=overwrite {{cita}} {{kcl_lib_flags}} --no-quiet -- simulation_tests
 
 test:
     cargo install cargo-nextest

rust/kcl-bumper/Cargo.toml

@@ -1,7 +1,7 @@
 
 [package]
 name = "kcl-bumper"
-version = "0.1.76"
+version = "0.1.74"
 edition = "2021"
 repository = "https://github.com/KittyCAD/modeling-api"
 rust-version = "1.76"

rust/kcl-derive-docs/Cargo.toml

@@ -1,7 +1,7 @@
 [package]
 name = "kcl-derive-docs"
 description = "A tool for generating documentation from Rust derive macros"
-version = "0.1.76"
+version = "0.1.74"
 edition = "2021"
 license = "MIT"
 repository = "https://github.com/KittyCAD/modeling-app"

rust/kcl-derive-docs/src/example_tests.rs

@@ -1,139 +0,0 @@
-use proc_macro2::Span;
-use quote::{quote, ToTokens};
-
-pub fn do_for_each_example_test(item: proc_macro2::TokenStream) -> proc_macro2::TokenStream {
-    let item: syn::ItemFn = syn::parse2(item.clone()).unwrap();
-    let mut result = proc_macro2::TokenStream::new();
-    for name in TEST_NAMES {
-        let mut item = item.clone();
-        item.sig.ident = syn::Ident::new(
-            &format!("{}_{}", item.sig.ident, name.replace('-', "_")),
-            Span::call_site(),
-        );
-        let name = name.to_owned();
-        let stmts = &item.block.stmts;
-        let block = quote! {
-            {
-                const NAME: &str = #name;
-                #(#stmts)*
-            }
-        };
-        item.block = Box::new(syn::parse2(block).unwrap());
-        result.extend(Some(item.into_token_stream()));
-    }
-
-    result
-}
-
-pub fn do_for_all_example_test(item: proc_macro2::TokenStream) -> proc_macro2::TokenStream {
-    let mut item: syn::ItemFn = syn::parse2(item).unwrap();
-    let len = TEST_NAMES.len();
-
-    let stmts = &item.block.stmts;
-    let test_names = TEST_NAMES.iter().map(|n| n.to_owned());
-    let block = quote! {
-        {
-            const TEST_NAMES: [&str; #len] = [#(#test_names,)*];
-            #(#stmts)*
-        }
-    };
-    item.block = Box::new(syn::parse2(block).unwrap());
-
-    item.into_token_stream()
-}
-
-pub const TEST_NAMES: [&str; 93] = [
-    "std-array-map-0",
-    "std-array-map-1",
-    "std-array-pop-0",
-    "std-array-push-0",
-    "std-array-reduce-0",
-    "std-array-reduce-1",
-    "std-array-reduce-2",
-    "std-clone-0",
-    "std-clone-1",
-    "std-clone-2",
-    "std-clone-3",
-    "std-clone-4",
-    "std-clone-5",
-    "std-clone-6",
-    "std-clone-7",
-    "std-clone-8",
-    "std-clone-9",
-    "std-helix-0",
-    "std-helix-1",
-    "std-helix-2",
-    "std-helix-3",
-    "std-math-abs-0",
-    "std-math-acos-0",
-    "std-math-asin-0",
-    "std-math-atan-0",
-    "std-math-atan2-0",
-    "std-math-ceil-0",
-    "std-math-cos-0",
-    "std-math-floor-0",
-    "std-math-ln-0",
-    "std-math-legLen-0",
-    "std-math-legAngX-0",
-    "std-math-legAngY-0",
-    "std-math-log-0",
-    "std-math-log10-0",
-    "std-math-log2-0",
-    "std-math-max-0",
-    "std-math-min-0",
-    "std-math-polar-0",
-    "std-math-pow-0",
-    "std-math-rem-0",
-    "std-math-round-0",
-    "std-math-sin-0",
-    "std-math-sqrt-0",
-    "std-math-tan-0",
-    "std-offsetPlane-0",
-    "std-offsetPlane-1",
-    "std-offsetPlane-2",
-    "std-offsetPlane-3",
-    "std-offsetPlane-4",
-    "std-sketch-circle-0",
-    "std-sketch-circle-1",
-    "std-sketch-patternTransform2d-0",
-    "std-sketch-revolve-0",
-    "std-sketch-revolve-1",
-    "std-sketch-revolve-10",
-    "std-sketch-revolve-11",
-    "std-sketch-revolve-12",
-    "std-sketch-revolve-2",
-    "std-sketch-revolve-3",
-    "std-sketch-revolve-4",
-    "std-sketch-revolve-5",
-    "std-sketch-revolve-6",
-    "std-sketch-revolve-7",
-    "std-sketch-revolve-8",
-    "std-sketch-revolve-9",
-    "std-solid-chamfer-0",
-    "std-solid-chamfer-1",
-    "std-solid-fillet-0",
-    "std-solid-fillet-1",
-    "std-solid-hollow-0",
-    "std-solid-hollow-1",
-    "std-solid-hollow-2",
-    "std-solid-patternTransform-0",
-    "std-solid-patternTransform-1",
-    "std-solid-patternTransform-2",
-    "std-solid-patternTransform-3",
-    "std-solid-patternTransform-4",
-    "std-solid-patternTransform-5",
-    "std-solid-shell-0",
-    "std-solid-shell-1",
-    "std-solid-shell-2",
-    "std-solid-shell-3",
-    "std-solid-shell-4",
-    "std-solid-shell-5",
-    "std-solid-shell-6",
-    "std-transform-mirror2d-0",
-    "std-transform-mirror2d-1",
-    "std-transform-mirror2d-2",
-    "std-transform-mirror2d-3",
-    "std-transform-mirror2d-4",
-    "std-units-toDegrees-0",
-    "std-units-toRadians-0",
-];

rust/kcl-derive-docs/src/lib.rs

@@ -2,16 +2,16 @@
 // automated enforcement.
 #![allow(clippy::style)]
 
-mod example_tests;
 #[cfg(test)]
 mod tests;
 mod unbox;
 
-use std::collections::HashMap;
+use std::{collections::HashMap, fs};
 
 use convert_case::Casing;
 use inflector::{cases::camelcase::to_camel_case, Inflector};
 use once_cell::sync::Lazy;
+use proc_macro2::Span;
 use quote::{format_ident, quote, quote_spanned, ToTokens};
 use regex::Regex;
 use serde::Deserialize;
@@ -28,13 +28,8 @@ pub fn stdlib(attr: proc_macro::TokenStream, item: proc_macro::TokenStream) -> p
 }
 
 #[proc_macro_attribute]
-pub fn for_each_example_test(_attr: proc_macro::TokenStream, item: proc_macro::TokenStream) -> proc_macro::TokenStream {
-    example_tests::do_for_each_example_test(item.into()).into()
-}
-
-#[proc_macro_attribute]
-pub fn for_all_example_test(_attr: proc_macro::TokenStream, item: proc_macro::TokenStream) -> proc_macro::TokenStream {
-    example_tests::do_for_all_example_test(item.into()).into()
+pub fn for_each_std_mod(_attr: proc_macro::TokenStream, item: proc_macro::TokenStream) -> proc_macro::TokenStream {
+    do_for_each_std_mod(item.into()).into()
 }
 
 /// Describes an argument of a stdlib function.
@@ -47,14 +42,6 @@ struct ArgMetadata {
     /// Does not do anything if the argument is already required.
     #[serde(default)]
     include_in_snippet: bool,
-
-    /// The snippet should suggest this value for the arg.
-    #[serde(default)]
-    snippet_value: Option<String>,
-
-    /// The snippet should suggest this value for the arg.
-    #[serde(default)]
-    snippet_value_array: Option<Vec<String>>,
 }
 
 #[derive(Deserialize, Debug)]
@@ -82,6 +69,11 @@ struct StdlibMetadata {
     #[serde(default)]
     feature_tree_operation: bool,
 
+    /// If true, expects keyword arguments.
+    /// If false, expects positional arguments.
+    #[serde(default)]
+    keywords: bool,
+
     /// If true, the first argument is unlabeled.
     /// If false, all arguments require labels.
     #[serde(default)]
@@ -100,6 +92,34 @@ fn do_stdlib(
     do_stdlib_inner(metadata, attr, item)
 }
 
+fn do_for_each_std_mod(item: proc_macro2::TokenStream) -> proc_macro2::TokenStream {
+    let item: syn::ItemFn = syn::parse2(item.clone()).unwrap();
+    let mut result = proc_macro2::TokenStream::new();
+    for name in fs::read_dir("kcl-lib/std").unwrap().filter_map(|e| {
+        let e = e.unwrap();
+        let filename = e.file_name();
+        filename.to_str().unwrap().strip_suffix(".kcl").map(str::to_owned)
+    }) {
+        for i in 0..10_usize {
+            let mut item = item.clone();
+            item.sig.ident = syn::Ident::new(&format!("{}_{}_shard_{i}", item.sig.ident, name), Span::call_site());
+            let stmts = &item.block.stmts;
+            let block = quote! {
+                {
+                    const STD_MOD_NAME: &str = #name;
+                    const SHARD: usize = #i;
+                    const SHARD_COUNT: usize = 10;
+                    #(#stmts)*
+                }
+            };
+            item.block = Box::new(syn::parse2(block).unwrap());
+            result.extend(Some(item.into_token_stream()));
+        }
+    }
+
+    result
+}
+
 fn do_output(res: Result<(proc_macro2::TokenStream, Vec<Error>), Error>) -> proc_macro::TokenStream {
     match res {
         Err(err) => err.to_compile_error().into(),
@@ -287,6 +307,12 @@ fn do_stdlib_inner(
         quote! { false }
     };
 
+    let uses_keyword_arguments = if metadata.keywords {
+        quote! { true }
+    } else {
+        quote! { false }
+    };
+
     let docs_crate = get_crate(None);
 
     // When the user attaches this proc macro to a function with the wrong type
@@ -315,10 +341,6 @@ fn do_stdlib_inner(
         }
         .trim_start_matches('_')
         .to_string();
-        // These aren't really KCL args, they're just state that each stdlib function's impl needs.
-        if arg_name == "exec_state" || arg_name == "args" {
-            continue;
-        }
 
         let ty = match arg {
             syn::FnArg::Receiver(pat) => pat.ty.as_ref().into_token_stream(),
@@ -329,24 +351,27 @@ fn do_stdlib_inner(
 
         let ty_string = rust_type_to_openapi_type(&ty_string);
         let required = !ty_ident.to_string().starts_with("Option <");
-        let Some(arg_meta) = metadata.args.get(&arg_name) else {
-            errors.push(Error::new_spanned(arg, format!("arg {arg_name} not found")));
+        let arg_meta = metadata.args.get(&arg_name);
+        let description = if let Some(s) = arg_meta.map(|arg| &arg.docs) {
+            quote! { #s }
+        } else if metadata.keywords && ty_string != "Args" && ty_string != "ExecState" {
+            errors.push(Error::new_spanned(
+                &arg,
+                "Argument was not documented in the args block",
+            ));
             continue;
+        } else {
+            quote! { String::new() }
         };
-        let description = arg_meta.docs.clone();
-        let include_in_snippet = required || arg_meta.include_in_snippet;
-        let snippet_value = arg_meta.snippet_value.clone();
-        let snippet_value_array = arg_meta.snippet_value_array.clone();
-        if snippet_value.is_some() && snippet_value_array.is_some() {
-            errors.push(Error::new_spanned(arg, format!("arg {arg_name} has set both snippet_value and snippet_value array, but at most one of these may be set. Please delete one of them.")));
-        }
+        let include_in_snippet = required || arg_meta.map(|arg| arg.include_in_snippet).unwrap_or_default();
         let label_required = !(i == 0 && metadata.unlabeled_first);
         let camel_case_arg_name = to_camel_case(&arg_name);
         if ty_string != "ExecState" && ty_string != "Args" {
             let schema = quote! {
                 generator.root_schema_for::<#ty_ident>()
             };
-            let q0 = quote! {
+            arg_types.push(quote! {
+                #docs_crate::StdLibFnArg {
                     name: #camel_case_arg_name.to_string(),
                     type_: #ty_string.to_string(),
                     schema: #schema,
@@ -354,32 +379,6 @@ fn do_stdlib_inner(
                     label_required: #label_required,
                     description: #description.to_string(),
                     include_in_snippet: #include_in_snippet,
-            };
-            let q1 = if let Some(snippet_value) = snippet_value {
-                quote! {
-                    snippet_value: Some(#snippet_value.to_owned()),
-                }
-            } else {
-                quote! {
-                    snippet_value: None,
-                }
-            };
-            let q2 = if let Some(snippet_value_array) = snippet_value_array {
-                quote! {
-                    snippet_value_array: Some(vec![
-                        #(#snippet_value_array.to_owned()),*
-                    ]),
-                }
-            } else {
-                quote! {
-                    snippet_value_array: None,
-                }
-            };
-            arg_types.push(quote! {
-                #docs_crate::StdLibFnArg {
-                #q0
-                #q1
-                #q2
                 }
             });
         }
@@ -443,8 +442,6 @@ fn do_stdlib_inner(
                 label_required: true,
                 description: String::new(),
                 include_in_snippet: true,
-                snippet_value: None,
-                snippet_value_array: None,
             })
         }
     } else {
@@ -511,6 +508,10 @@ fn do_stdlib_inner(
                 vec![#(#tags),*]
             }
 
+            fn keyword_arguments(&self) -> bool {
+                #uses_keyword_arguments
+            }
+
             fn args(&self, inline_subschemas: bool) -> Vec<#docs_crate::StdLibFnArg> {
                 let mut settings = schemars::gen::SchemaSettings::openapi3();
                 // We set this to false so we can recurse them later.

rust/kcl-derive-docs/src/tests.rs

@@ -40,9 +40,6 @@ fn test_args_with_refs() {
     let (item, mut errors) = do_stdlib(
         quote! {
             name = "someFn",
-            args = {
-                data = { docs = "The data for this function"},
-            },
         },
         quote! {
             /// Docs
@@ -68,9 +65,6 @@ fn test_args_with_lifetime() {
     let (item, mut errors) = do_stdlib(
         quote! {
             name = "someFn",
-            args = {
-                data = { docs = "Arg for the function" },
-            }
         },
         quote! {
             /// Docs
@@ -123,8 +117,7 @@ fn test_stdlib_line_to() {
         quote! {
             name = "lineTo",
             args = {
-                data = { docs = "the sketch you're adding the line to" },
-                sketch = { docs = "the sketch you're adding the line to" },
+                sketch = { docs = "the sketch you're adding the line to" }
             }
         },
         quote! {

rust/kcl-derive-docs/tests/args_with_lifetime.gen

@@ -91,6 +91,10 @@ impl crate::docs::StdLibFn for SomeFn {
         vec![]
     }
 
+    fn keyword_arguments(&self) -> bool {
+        false
+    }
+
     fn args(&self, inline_subschemas: bool) -> Vec<crate::docs::StdLibFnArg> {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
@@ -101,10 +105,8 @@ impl crate::docs::StdLibFn for SomeFn {
             schema: generator.root_schema_for::<Foo>(),
             required: true,
             label_required: true,
-            description: "Arg for the function".to_string(),
+            description: String::new().to_string(),
             include_in_snippet: true,
-            snippet_value: None,
-            snippet_value_array: None,
         }]
     }
 
@@ -121,8 +123,6 @@ impl crate::docs::StdLibFn for SomeFn {
             label_required: true,
             description: String::new(),
             include_in_snippet: true,
-            snippet_value: None,
-            snippet_value_array: None,
         })
     }
 

rust/kcl-derive-docs/tests/args_with_refs.gen

@@ -91,6 +91,10 @@ impl crate::docs::StdLibFn for SomeFn {
         vec![]
     }
 
+    fn keyword_arguments(&self) -> bool {
+        false
+    }
+
     fn args(&self, inline_subschemas: bool) -> Vec<crate::docs::StdLibFnArg> {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
@@ -101,10 +105,8 @@ impl crate::docs::StdLibFn for SomeFn {
             schema: generator.root_schema_for::<str>(),
             required: true,
             label_required: true,
-            description: "The data for this function".to_string(),
+            description: String::new().to_string(),
             include_in_snippet: true,
-            snippet_value: None,
-            snippet_value_array: None,
         }]
     }
 
@@ -121,8 +123,6 @@ impl crate::docs::StdLibFn for SomeFn {
             label_required: true,
             description: String::new(),
             include_in_snippet: true,
-            snippet_value: None,
-            snippet_value_array: None,
         })
     }
 

rust/kcl-derive-docs/tests/array.gen

@@ -92,11 +92,23 @@ impl crate::docs::StdLibFn for Show {
         vec![]
     }
 
+    fn keyword_arguments(&self) -> bool {
+        false
+    }
+
     fn args(&self, inline_subschemas: bool) -> Vec<crate::docs::StdLibFnArg> {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        vec![]
+        vec![crate::docs::StdLibFnArg {
+            name: "args".to_string(),
+            type_: "[number]".to_string(),
+            schema: generator.root_schema_for::<[f64; 2usize]>(),
+            required: true,
+            label_required: true,
+            description: String::new().to_string(),
+            include_in_snippet: true,
+        }]
     }
 
     fn return_value(&self, inline_subschemas: bool) -> Option<crate::docs::StdLibFnArg> {
@@ -112,8 +124,6 @@ impl crate::docs::StdLibFn for Show {
             label_required: true,
             description: String::new(),
             include_in_snippet: true,
-            snippet_value: None,
-            snippet_value_array: None,
         })
     }
 

rust/kcl-derive-docs/tests/box.gen

@@ -92,11 +92,23 @@ impl crate::docs::StdLibFn for Show {
         vec![]
     }
 
+    fn keyword_arguments(&self) -> bool {
+        false
+    }
+
     fn args(&self, inline_subschemas: bool) -> Vec<crate::docs::StdLibFnArg> {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        vec![]
+        vec![crate::docs::StdLibFnArg {
+            name: "args".to_string(),
+            type_: "number".to_string(),
+            schema: generator.root_schema_for::<f64>(),
+            required: true,
+            label_required: true,
+            description: String::new().to_string(),
+            include_in_snippet: true,
+        }]
     }
 
     fn return_value(&self, inline_subschemas: bool) -> Option<crate::docs::StdLibFnArg> {
@@ -112,8 +124,6 @@ impl crate::docs::StdLibFn for Show {
             label_required: true,
             description: String::new(),
             include_in_snippet: true,
-            snippet_value: None,
-            snippet_value_array: None,
         })
     }
 

rust/kcl-derive-docs/tests/doc_comment_with_code.gen

@@ -93,11 +93,23 @@ impl crate::docs::StdLibFn for MyFunc {
         vec![]
     }
 
+    fn keyword_arguments(&self) -> bool {
+        false
+    }
+
     fn args(&self, inline_subschemas: bool) -> Vec<crate::docs::StdLibFnArg> {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        vec![]
+        vec![crate::docs::StdLibFnArg {
+            name: "args".to_string(),
+            type_: "kittycad::types::InputFormat".to_string(),
+            schema: generator.root_schema_for::<Option<kittycad::types::InputFormat>>(),
+            required: false,
+            label_required: true,
+            description: String::new().to_string(),
+            include_in_snippet: false,
+        }]
     }
 
     fn return_value(&self, inline_subschemas: bool) -> Option<crate::docs::StdLibFnArg> {
@@ -113,8 +125,6 @@ impl crate::docs::StdLibFn for MyFunc {
             label_required: true,
             description: String::new(),
             include_in_snippet: true,
-            snippet_value: None,
-            snippet_value_array: None,
         })
     }
 

rust/kcl-derive-docs/tests/lineTo.gen

@@ -93,6 +93,10 @@ impl crate::docs::StdLibFn for LineTo {
         vec![]
     }
 
+    fn keyword_arguments(&self) -> bool {
+        false
+    }
+
     fn args(&self, inline_subschemas: bool) -> Vec<crate::docs::StdLibFnArg> {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
@@ -104,10 +108,8 @@ impl crate::docs::StdLibFn for LineTo {
                 schema: generator.root_schema_for::<LineToData>(),
                 required: true,
                 label_required: true,
-                description: "the sketch you're adding the line to".to_string(),
+                description: String::new().to_string(),
                 include_in_snippet: true,
-                snippet_value: None,
-                snippet_value_array: None,
             },
             crate::docs::StdLibFnArg {
                 name: "sketch".to_string(),
@@ -117,8 +119,6 @@ impl crate::docs::StdLibFn for LineTo {
                 label_required: true,
                 description: "the sketch you're adding the line to".to_string(),
                 include_in_snippet: true,
-                snippet_value: None,
-                snippet_value_array: None,
             },
         ]
     }
@@ -136,8 +136,6 @@ impl crate::docs::StdLibFn for LineTo {
             label_required: true,
             description: String::new(),
             include_in_snippet: true,
-            snippet_value: None,
-            snippet_value_array: None,
         })
     }
 

rust/kcl-derive-docs/tests/min.gen

@@ -92,11 +92,23 @@ impl crate::docs::StdLibFn for Min {
         vec![]
     }
 
+    fn keyword_arguments(&self) -> bool {
+        false
+    }
+
     fn args(&self, inline_subschemas: bool) -> Vec<crate::docs::StdLibFnArg> {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        vec![]
+        vec![crate::docs::StdLibFnArg {
+            name: "args".to_string(),
+            type_: "[number]".to_string(),
+            schema: generator.root_schema_for::<Vec<f64>>(),
+            required: true,
+            label_required: true,
+            description: String::new().to_string(),
+            include_in_snippet: true,
+        }]
     }
 
     fn return_value(&self, inline_subschemas: bool) -> Option<crate::docs::StdLibFnArg> {
@@ -112,8 +124,6 @@ impl crate::docs::StdLibFn for Min {
             label_required: true,
             description: String::new(),
             include_in_snippet: true,
-            snippet_value: None,
-            snippet_value_array: None,
         })
     }
 

rust/kcl-derive-docs/tests/option.gen

@@ -92,11 +92,23 @@ impl crate::docs::StdLibFn for Show {
         vec![]
     }
 
+    fn keyword_arguments(&self) -> bool {
+        false
+    }
+
     fn args(&self, inline_subschemas: bool) -> Vec<crate::docs::StdLibFnArg> {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        vec![]
+        vec![crate::docs::StdLibFnArg {
+            name: "args".to_string(),
+            type_: "number".to_string(),
+            schema: generator.root_schema_for::<Option<f64>>(),
+            required: false,
+            label_required: true,
+            description: String::new().to_string(),
+            include_in_snippet: false,
+        }]
     }
 
     fn return_value(&self, inline_subschemas: bool) -> Option<crate::docs::StdLibFnArg> {
@@ -112,8 +124,6 @@ impl crate::docs::StdLibFn for Show {
             label_required: true,
             description: String::new(),
             include_in_snippet: true,
-            snippet_value: None,
-            snippet_value_array: None,
         })
     }
 

rust/kcl-derive-docs/tests/option_input_format.gen

@@ -92,11 +92,23 @@ impl crate::docs::StdLibFn for Import {
         vec![]
     }
 
+    fn keyword_arguments(&self) -> bool {
+        false
+    }
+
     fn args(&self, inline_subschemas: bool) -> Vec<crate::docs::StdLibFnArg> {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        vec![]
+        vec![crate::docs::StdLibFnArg {
+            name: "args".to_string(),
+            type_: "kittycad::types::InputFormat".to_string(),
+            schema: generator.root_schema_for::<Option<kittycad::types::InputFormat>>(),
+            required: false,
+            label_required: true,
+            description: String::new().to_string(),
+            include_in_snippet: false,
+        }]
     }
 
     fn return_value(&self, inline_subschemas: bool) -> Option<crate::docs::StdLibFnArg> {
@@ -112,8 +124,6 @@ impl crate::docs::StdLibFn for Import {
             label_required: true,
             description: String::new(),
             include_in_snippet: true,
-            snippet_value: None,
-            snippet_value_array: None,
         })
     }
 

rust/kcl-derive-docs/tests/return_vec_box_sketch.gen

@@ -92,11 +92,23 @@ impl crate::docs::StdLibFn for Import {
         vec![]
     }
 
+    fn keyword_arguments(&self) -> bool {
+        false
+    }
+
     fn args(&self, inline_subschemas: bool) -> Vec<crate::docs::StdLibFnArg> {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        vec![]
+        vec![crate::docs::StdLibFnArg {
+            name: "args".to_string(),
+            type_: "kittycad::types::InputFormat".to_string(),
+            schema: generator.root_schema_for::<Option<kittycad::types::InputFormat>>(),
+            required: false,
+            label_required: true,
+            description: String::new().to_string(),
+            include_in_snippet: false,
+        }]
     }
 
     fn return_value(&self, inline_subschemas: bool) -> Option<crate::docs::StdLibFnArg> {
@@ -112,8 +124,6 @@ impl crate::docs::StdLibFn for Import {
             label_required: true,
             description: String::new(),
             include_in_snippet: true,
-            snippet_value: None,
-            snippet_value_array: None,
         })
     }
 

rust/kcl-derive-docs/tests/return_vec_sketch.gen

@@ -92,11 +92,23 @@ impl crate::docs::StdLibFn for Import {
         vec![]
     }
 
+    fn keyword_arguments(&self) -> bool {
+        false
+    }
+
     fn args(&self, inline_subschemas: bool) -> Vec<crate::docs::StdLibFnArg> {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        vec![]
+        vec![crate::docs::StdLibFnArg {
+            name: "args".to_string(),
+            type_: "kittycad::types::InputFormat".to_string(),
+            schema: generator.root_schema_for::<Option<kittycad::types::InputFormat>>(),
+            required: false,
+            label_required: true,
+            description: String::new().to_string(),
+            include_in_snippet: false,
+        }]
     }
 
     fn return_value(&self, inline_subschemas: bool) -> Option<crate::docs::StdLibFnArg> {
@@ -112,8 +124,6 @@ impl crate::docs::StdLibFn for Import {
             label_required: true,
             description: String::new(),
             include_in_snippet: true,
-            snippet_value: None,
-            snippet_value_array: None,
         })
     }
 

rust/kcl-derive-docs/tests/show.gen

@@ -92,11 +92,23 @@ impl crate::docs::StdLibFn for Show {
         vec![]
     }
 
+    fn keyword_arguments(&self) -> bool {
+        false
+    }
+
     fn args(&self, inline_subschemas: bool) -> Vec<crate::docs::StdLibFnArg> {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
         let mut generator = schemars::gen::SchemaGenerator::new(settings);
-        vec![]
+        vec![crate::docs::StdLibFnArg {
+            name: "args".to_string(),
+            type_: "[number]".to_string(),
+            schema: generator.root_schema_for::<Vec<f64>>(),
+            required: true,
+            label_required: true,
+            description: String::new().to_string(),
+            include_in_snippet: true,
+        }]
     }
 
     fn return_value(&self, inline_subschemas: bool) -> Option<crate::docs::StdLibFnArg> {
@@ -112,8 +124,6 @@ impl crate::docs::StdLibFn for Show {
             label_required: true,
             description: String::new(),
             include_in_snippet: true,
-            snippet_value: None,
-            snippet_value_array: None,
         })
     }
 

rust/kcl-derive-docs/tests/test_args_with_exec_state.gen

@@ -91,6 +91,10 @@ impl crate::docs::StdLibFn for SomeFunction {
         vec![]
     }
 
+    fn keyword_arguments(&self) -> bool {
+        false
+    }
+
     fn args(&self, inline_subschemas: bool) -> Vec<crate::docs::StdLibFnArg> {
         let mut settings = schemars::gen::SchemaSettings::openapi3();
         settings.inline_subschemas = inline_subschemas;
@@ -111,8 +115,6 @@ impl crate::docs::StdLibFn for SomeFunction {
             label_required: true,
             description: String::new(),
             include_in_snippet: true,
-            snippet_value: None,
-            snippet_value_array: None,
         })
     }
 

rust/kcl-directory-test-macro/Cargo.toml

@@ -1,7 +1,7 @@
 [package]
 name = "kcl-directory-test-macro"
 description = "A tool for generating tests from a directory of kcl files"
-version = "0.1.76"
+version = "0.1.74"
 edition = "2021"
 license = "MIT"
 repository = "https://github.com/KittyCAD/modeling-app"

rust/kcl-language-server-release/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "kcl-language-server-release"
-version = "0.1.76"
+version = "0.1.74"
 edition = "2021"
 authors = ["KittyCAD Inc <kcl@kittycad.io>"]
 publish = false

rust/kcl-language-server/Cargo.toml

@@ -2,7 +2,7 @@
 name = "kcl-language-server"
 description = "A language server for KCL."
 authors = ["KittyCAD Inc <kcl@kittycad.io>"]
-version = "0.2.76"
+version = "0.2.74"
 edition = "2021"
 license = "MIT"
 # See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html

rust/kcl-lib/Cargo.toml

@@ -1,7 +1,7 @@
 [package]
 name = "kcl-lib"
 description = "KittyCAD Language implementation and tools"
-version = "0.2.76"
+version = "0.2.74"
 edition = "2021"
 license = "MIT"
 repository = "https://github.com/KittyCAD/modeling-app"

rust/kcl-lib/e2e/executor/main.rs

@@ -2,7 +2,7 @@ mod cache;
 
 use kcl_lib::{
     test_server::{execute_and_export_step, execute_and_snapshot, execute_and_snapshot_no_auth},
-    BacktraceItem, ExecError, ModuleId, SourceRange,
+    ExecError,
 };
 
 /// The minimum permissible difference between asserted twenty-twenty images.
@@ -441,15 +441,10 @@ async fn kcl_test_import_file_doesnt_exist() {
 model = cube"#;
 
     let result = execute_and_snapshot(code, None).await;
-    let err = result.unwrap_err();
-    let err = err.as_kcl_error().unwrap();
-    assert_eq!(err.message(), "File `thing.obj` does not exist.");
+    assert!(result.is_err());
     assert_eq!(
-        err.backtrace(),
-        vec![BacktraceItem {
-            source_range: SourceRange::new(0, 18, ModuleId::default()),
-            fn_name: None,
-        }]
+        result.err().unwrap().to_string(),
+        r#"semantic: KclErrorDetails { source_ranges: [SourceRange([0, 18, 0])], message: "File `thing.obj` does not exist." }"#
     );
 }
 
@@ -524,18 +519,10 @@ import 'e2e/executor/inputs/cube.gltf'
 model = cube"#;
 
     let result = execute_and_snapshot(code, None).await;
-    let err = result.unwrap_err();
-    let err = err.as_kcl_error().unwrap();
+    assert!(result.is_err());
     assert_eq!(
-        err.message(),
-        "The given format does not match the file extension. Expected: `gltf`, Given: `obj`"
-    );
-    assert_eq!(
-        err.backtrace(),
-        vec![BacktraceItem {
-            source_range: SourceRange::new(32, 70, ModuleId::default()),
-            fn_name: None,
-        }]
+        result.err().unwrap().to_string(),
+        r#"semantic: KclErrorDetails { source_ranges: [SourceRange([32, 70, 0])], message: "The given format does not match the file extension. Expected: `gltf`, Given: `obj`" }"#
     );
 }
 
@@ -1679,15 +1666,10 @@ example = extrude(exampleSketch, length = 10)
 "#;
 
     let result = execute_and_snapshot(code, None).await;
-    let err = result.unwrap_err();
-    let err = err.as_kcl_error().unwrap();
-    assert_eq!(err.message(), "Cannot have an x constrained angle of 90 degrees");
+    assert!(result.is_err());
     assert_eq!(
-        err.backtrace(),
-        vec![BacktraceItem {
-            source_range: SourceRange::new(70, 111, ModuleId::default()),
-            fn_name: Some("angledLine".to_owned())
-        }]
+        result.err().unwrap().to_string(),
+        r#"type: KclErrorDetails { source_ranges: [SourceRange([70, 111, 0])], message: "Cannot have an x constrained angle of 90 degrees" }"#
     );
 }
 
@@ -1704,15 +1686,10 @@ example = extrude(exampleSketch, length = 10)
 "#;
 
     let result = execute_and_snapshot(code, None).await;
-    let err = result.unwrap_err();
-    let err = err.as_kcl_error().unwrap();
-    assert_eq!(err.message(), "Cannot have an x constrained angle of 270 degrees");
+    assert!(result.is_err());
     assert_eq!(
-        err.backtrace(),
-        vec![BacktraceItem {
-            source_range: SourceRange::new(70, 112, ModuleId::default()),
-            fn_name: Some("angledLine".to_owned())
-        }]
+        result.err().unwrap().to_string(),
+        r#"type: KclErrorDetails { source_ranges: [SourceRange([70, 112, 0])], message: "Cannot have an x constrained angle of 270 degrees" }"#
     );
 }
 
@@ -1729,15 +1706,10 @@ example = extrude(exampleSketch, length = 10)
 "#;
 
     let result = execute_and_snapshot(code, None).await;
-    let err = result.unwrap_err();
-    let err = err.as_kcl_error().unwrap();
-    assert_eq!(err.message(), "Cannot have a y constrained angle of 0 degrees");
+    assert!(result.is_err());
     assert_eq!(
-        err.backtrace(),
-        vec![BacktraceItem {
-            source_range: SourceRange::new(70, 110, ModuleId::default()),
-            fn_name: Some("angledLine".to_owned())
-        }]
+        result.err().unwrap().to_string(),
+        r#"type: KclErrorDetails { source_ranges: [SourceRange([70, 110, 0])], message: "Cannot have a y constrained angle of 0 degrees" }"#
     );
 }
 
@@ -1754,15 +1726,10 @@ example = extrude(exampleSketch, length = 10)
 "#;
 
     let result = execute_and_snapshot(code, None).await;
-    let err = result.unwrap_err();
-    let err = err.as_kcl_error().unwrap();
-    assert_eq!(err.message(), "Cannot have a y constrained angle of 180 degrees");
+    assert!(result.is_err());
     assert_eq!(
-        err.backtrace(),
-        vec![BacktraceItem {
-            source_range: SourceRange::new(70, 112, ModuleId::default()),
-            fn_name: Some("angledLine".to_owned())
-        }]
+        result.err().unwrap().to_string(),
+        r#"type: KclErrorDetails { source_ranges: [SourceRange([70, 112, 0])], message: "Cannot have a y constrained angle of 180 degrees" }"#
     );
 }
 
@@ -1779,15 +1746,10 @@ extrusion = extrude(sketch001, length = 10)
 "#;
 
     let result = execute_and_snapshot(code, None).await;
-    let err = result.unwrap_err();
-    let err = err.as_kcl_error().unwrap();
-    assert_eq!(err.message(), "Cannot have an x constrained angle of 90 degrees");
+    assert!(result.is_err());
     assert_eq!(
-        err.backtrace(),
-        vec![BacktraceItem {
-            source_range: SourceRange::new(66, 116, ModuleId::default()),
-            fn_name: Some("angledLine".to_owned())
-        }]
+        result.err().unwrap().to_string(),
+        r#"type: KclErrorDetails { source_ranges: [SourceRange([66, 116, 0])], message: "Cannot have an x constrained angle of 90 degrees" }"#
     );
 }
 
@@ -1795,7 +1757,7 @@ extrusion = extrude(sketch001, length = 10)
 async fn kcl_test_angled_line_of_x_length_270() {
     let code = r#"sketch001 = startSketchOn(XZ)
   |> startProfile(at = [0, 0])
-  |> angledLine(angle = 270, lengthX = 90, tag = $edge1)
+  |> angledLine(angle = 90, lengthX = 90, tag = $edge1)
   |> angledLine(angle = -15, lengthX = -15, tag = $edge2)
   |> line(end = [0, -5])
   |> close(tag = $edge3)
@@ -1804,15 +1766,10 @@ extrusion = extrude(sketch001, length = 10)
 "#;
 
     let result = execute_and_snapshot(code, None).await;
-    let err = result.unwrap_err();
-    let err = err.as_kcl_error().unwrap();
-    assert_eq!(err.message(), "Cannot have an x constrained angle of 270 degrees");
+    assert!(result.is_err());
     assert_eq!(
-        err.backtrace(),
-        vec![BacktraceItem {
-            source_range: SourceRange::new(66, 117, ModuleId::default()),
-            fn_name: Some("angledLine".to_owned())
-        }]
+        result.err().unwrap().to_string(),
+        r#"type: KclErrorDetails { source_ranges: [SourceRange([66, 116, 0])], message: "Cannot have an x constrained angle of 90 degrees" }"#
     );
 }
 
@@ -1831,15 +1788,10 @@ example = extrude(exampleSketch, length = 10)
 "#;
 
     let result = execute_and_snapshot(code, None).await;
-    let err = result.unwrap_err();
-    let err = err.as_kcl_error().unwrap();
-    assert_eq!(err.message(), "Cannot have a y constrained angle of 0 degrees");
+    assert!(result.is_err());
     assert_eq!(
-        err.backtrace(),
-        vec![BacktraceItem {
-            source_range: SourceRange::new(95, 130, ModuleId::default()),
-            fn_name: Some("angledLine".to_owned())
-        }]
+        result.err().unwrap().to_string(),
+        r#"type: KclErrorDetails { source_ranges: [SourceRange([95, 130, 0])], message: "Cannot have a y constrained angle of 0 degrees" }"#
     );
 }
 
@@ -1858,15 +1810,10 @@ example = extrude(exampleSketch, length = 10)
 "#;
 
     let result = execute_and_snapshot(code, None).await;
-    let err = result.unwrap_err();
-    let err = err.as_kcl_error().unwrap();
-    assert_eq!(err.message(), "Cannot have a y constrained angle of 180 degrees");
+    assert!(result.is_err());
     assert_eq!(
-        err.backtrace(),
-        vec![BacktraceItem {
-            source_range: SourceRange::new(95, 132, ModuleId::default()),
-            fn_name: Some("angledLine".to_owned())
-        }]
+        result.err().unwrap().to_string(),
+        r#"type: KclErrorDetails { source_ranges: [SourceRange([95, 132, 0])], message: "Cannot have a y constrained angle of 180 degrees" }"#
     );
 }
 
@@ -1885,15 +1832,10 @@ example = extrude(exampleSketch, length = 10)
 "#;
 
     let result = execute_and_snapshot(code, None).await;
-    let err = result.unwrap_err();
-    let err = err.as_kcl_error().unwrap();
-    assert_eq!(err.message(), "Cannot have a y constrained angle of 180 degrees");
+    assert!(result.is_err());
     assert_eq!(
-        err.backtrace(),
-        vec![BacktraceItem {
-            source_range: SourceRange::new(95, 133, ModuleId::default()),
-            fn_name: Some("angledLine".to_owned())
-        }]
+        result.err().unwrap().to_string(),
+        r#"type: KclErrorDetails { source_ranges: [SourceRange([95, 133, 0])], message: "Cannot have a y constrained angle of 180 degrees" }"#
     );
 }
 
@@ -1907,31 +1849,10 @@ someFunction('INVALID')
 "#;
 
     let result = execute_and_snapshot(code, None).await;
-    let err = result.unwrap_err();
-    let err = err.as_kcl_error().unwrap();
+    assert!(result.is_err());
     assert_eq!(
-        err.message(),
-        "This function expected the input argument to be Solid or Plane but it's actually of type string"
-    );
-    assert_eq!(
-        err.source_ranges(),
-        vec![
-            SourceRange::new(46, 55, ModuleId::default()),
-            SourceRange::new(60, 83, ModuleId::default()),
-        ]
-    );
-    assert_eq!(
-        err.backtrace(),
-        vec![
-            BacktraceItem {
-                source_range: SourceRange::new(46, 55, ModuleId::default()),
-                fn_name: Some("someFunction".to_owned()),
-            },
-            BacktraceItem {
-                source_range: SourceRange::new(60, 83, ModuleId::default()),
-                fn_name: None,
-            },
-        ]
+        result.err().unwrap().to_string(),
+        r#"semantic: KclErrorDetails { source_ranges: [SourceRange([46, 55, 0]), SourceRange([60, 83, 0])], message: "This function expected the input argument to be Solid or Plane but it's actually of type string" }"#
     );
 }
 
@@ -1952,14 +1873,12 @@ async fn kcl_test_error_no_auth_websocket() {
 "#;
 
     let result = execute_and_snapshot_no_auth(code, None).await;
-    let err = result.unwrap_err();
-    let err = err.as_kcl_error().unwrap();
-    assert!(
-        err.message()
-            .contains("Please send the following object over this websocket"),
-        "actual: {}",
-        err.message()
-    );
+    assert!(result.is_err());
+    assert!(result
+        .err()
+        .unwrap()
+        .to_string()
+        .contains("Please send the following object over this websocket"));
 }
 
 #[tokio::test(flavor = "multi_thread")]