// Fan
// Spinning axial fan that moves airflow

// Set units
@settings(defaultLengthUnit = mm, kclVersion = 1.0)

// Import parameters
import * from "parameters.kcl"

// Model the center of the fan
fanCenter = startSketchOn(XZ)
  |> startProfile(at = [-0.0001, fanHeight])
  |> xLine(endAbsolute = -15 + 1.5)
  |> tangentialArc(radius = 1.5, angle = 90)
  |> yLine(endAbsolute = 4.5)
  |> xLine(endAbsolute = -13)
  |> yLine(endAbsolute = profileStartY(%) - 5)
  |> tangentialArc(radius = 1, angle = -90)
  |> xLine(endAbsolute = -1)
  |> yLine(length = 2)
  |> xLine(length = -0.15)
  |> line(endAbsolute = [
       profileStartX(%) - 1,
       profileStartY(%) - 1.4
     ])
  |> xLine(endAbsolute = profileStartX(%))
  |> yLine(endAbsolute = profileStartY(%))
  |> close()
  |> revolve(axis = {
       direction = [0.0, 1.0],
       origin = [0.0, 0.0]
     })
  |> appearance(color = "#f3e2d8")

// Create a function for a lofted fan blade cross section that rotates about the center hub of the fan
fn fanBlade(offsetHeight, startAngle: number(deg)) {
  fanBlade = startSketchOn(offsetPlane(XY, offset = offsetHeight))
    |> startProfile(at = [
         15 * cos(startAngle),
         15 * sin(startAngle)
       ])
    |> arc(angleStart = startAngle, angleEnd = startAngle + 14, radius = 15)
    |> arc(
         endAbsolute = [
           fanSize * 22 / 50 * cos(startAngle - 20),
           fanSize * 22 / 50 * sin(startAngle - 20)
         ],
         interiorAbsolute = [
           fanSize * 11 / 50 * cos(startAngle + 3),
           fanSize * 11 / 50 * sin(startAngle + 3)
         ],
       )
    |> arc(
         endAbsolute = [
           fanSize * 22 / 50 * cos(startAngle - 24),
           fanSize * 22 / 50 * sin(startAngle - 24)
         ],
         interiorAbsolute = [
           fanSize * 22 / 50 * cos(startAngle - 22),
           fanSize * 22 / 50 * sin(startAngle - 22)
         ],
       )
    |> arc(
         endAbsolute = [profileStartX(%), profileStartY(%)],
         interiorAbsolute = [
           fanSize * 11 / 50 * cos(startAngle - 5),
           fanSize * 11 / 50 * sin(startAngle - 5)
         ],
       )
    |> close()
  return fanBlade
}

// Loft the fan blade cross sections into a single blade, then pattern them about the fan center
crossSections = [
  fanBlade(offsetHeight = 4.5, startAngle = 50),
  fanBlade(offsetHeight = (fanHeight - 2 - 4) / 2, startAngle = 30),
  fanBlade(offsetHeight = fanHeight - 2, startAngle = 0)
]
loft(crossSections)
  |> appearance(color = "#f3e2d8")
  |> patternCircular3d(
       instances = 9,
       axis = [0, 0, 1],
       center = [0, 0, 0],
       arcDegrees = 360,
       rotateDuplicates = true,
     )