// Bench
// This is a slight remix of Depep1's original 3D Boaty (https://www.printables.com/model/1141963-3d-boaty). This is a tool used for benchmarking 3D FDM printers for bed adhesion, overhangs, bridging and top surface quality. The name of this file is a bit of misnomer, the shape of the object is a typical park bench.

// Set units in millimeters (mm)
@settings(defaultLengthUnit = mm, kclVersion = 1.0)

// Define the bench length
benchLength = 56

// Import various constants and functions from our library
import dividerThickness from "bench-parts.kcl"
import divider from "bench-parts.kcl"
import connector from "bench-parts.kcl"
import seatSlats from "bench-parts.kcl"
import backSlats from "bench-parts.kcl"
import armRest from "bench-parts.kcl"

// Create the dividers, these hold the seat and back slats
divider(YZ)
divider(offsetPlane(YZ, offset = benchLength / 2))
divider(offsetPlane(YZ, offset = -benchLength / 2))

// Create the connectors to join the dividers
connector(offsetPlane(YZ, offset = -benchLength / 2), length = benchLength)

// Create the seat slats
seatSlats(offsetPlane(YZ, offset = -benchLength / 2 - (dividerThickness / 2)), length = benchLength + dividerThickness)

// Create the back slats
backSlats(offsetPlane(YZ, offset = -benchLength / 2 - (dividerThickness / 2)), length = benchLength + dividerThickness)

// Create the arm rests
armRest(YZ, offset = benchLength / 2)
armRest(YZ, offset = -benchLength / 2)