@settings(defaultLengthUnit = in)

sketch002 = startSketchOn(-XZ)

sketch002Profile000 = startProfile(sketch002, at = [-0.1625, 0.1875])
  |> xLine(length = 0.325)
  |> arc(
       angleStart = 90,
       angleEnd = 0,
       radius = 0.025,
    )
  |> yLine(length = -0.325)
  |> arc(
       angleStart = 360,
       angleEnd = 270,
       radius = 0.025,
    )
  |> xLine(length = -0.325)
  |> arc(
       angleStart = 270,
       angleEnd = 180,
       radius = 0.025,
    )
  |> yLine(length = 0.325)
  |> arc(
       angleStart = 180,
       angleEnd = 90,
       radius = 0.025,
    )
  |> close()
  |> subtract2d(tool = circle(
  center = [-0, -0],
  radius = 0.039062,
  tag = $hole001
))

extrude000 = extrude(sketch002Profile000, length = 0.0625)

sketch003 = startSketchOn(XY)

sketch003Profile000 = startProfile(sketch003, at = [-0.05582, -0.21875])
  |> line(end = [0.048496, 0.21875])
  |> xLine(length = -0.087793)
  |> line(end = [-0.026673, -0.120313])
  |> line(end = [0.058646, -0.098438])
  |> xLine(length = 0.007324)
  |> close()

sketch003Profile001 = startProfile(sketch003, at = [0.007324, 0])
  |> xLine(length = 0.087793)
  |> line(end = [0.026673, -0.120313])
  |> line(end = [-0.058646, -0.098438])
  |> xLine(length = -0.007324)
  |> line(end = [-0.048496, 0.21875])
  |> close()

extrude001 = extrude([sketch003Profile000, sketch003Profile001], length = 0.1, bidirectionalLength = 0.1)

sketch004 = startSketchOn(offsetPlane(-XZ, offset = 0.1))

sketch004Profile000 = circle(
  sketch004,
  center = [-0, -0],
  radius = 0.039062
)

cut000Extrude = extrude([sketch004Profile000], length = -1)

cut000 = subtract(extrude001, tools = cut000Extrude)

sketch005 = startSketchOn(offsetPlane(-XZ, offset = 0.07))

sketch005Profile000 = circle(
  sketch005,
  center = [0, 0],
  radius = 0.052734
)

sketch006 = startSketchOn(offsetPlane(-XZ, offset = 0.0325))

sketch006Profile000 = circle(
  sketch006,
  center = [0, 0],
  radius = 0.03
)

draftCut000Extrude = loft([sketch005Profile000, sketch006Profile000])

draftCut000 = subtract(extrude000, tools = draftCut000Extrude)