74 lines
2.6 KiB
Plaintext
74 lines
2.6 KiB
Plaintext
// Lego Brick
|
|
// A standard Lego brick. This is a small, plastic construction block toy that can be interlocked with other blocks to build various structures, models, and figures. There are a lot of hacks used in this code.
|
|
|
|
// Set Units
|
|
@settings(defaultLengthUnit = in, kclVersion = 1.0)
|
|
|
|
// Define parameters
|
|
lbumps = 3 // number of bumps long
|
|
wbumps = 2 // number of bumps wide
|
|
pitch = 8.0
|
|
clearance = 0.1
|
|
bumpDiam = 4.8
|
|
bumpHeight = 1.8
|
|
height = 3.2
|
|
t = (pitch - (2 * clearance) - bumpDiam) / 2.0
|
|
postDiam = pitch - t // works out to 6.5
|
|
totalLength = lbumps * pitch - (2.0 * clearance)
|
|
totalWidth = wbumps * pitch - (2.0 * clearance)
|
|
|
|
// Calculate the number of segments in the length and width
|
|
lSegments = totalLength / lbumps
|
|
wSegments = totalWidth / wbumps
|
|
|
|
// Add assertions to ensure that the number of bumps are greater than 1
|
|
assert(lbumps, isGreaterThan = 1, error = "lbumps must be greater than 1")
|
|
assert(wbumps, isGreaterThan = 1, error = "wbumps must be greater than 1")
|
|
|
|
// Make the base
|
|
base = startSketchOn(XY)
|
|
|> startProfile(at = [-totalWidth / 2, -totalLength / 2])
|
|
|> line(end = [totalWidth, 0])
|
|
|> line(end = [0, totalLength])
|
|
|> line(end = [-totalWidth, 0])
|
|
|> close()
|
|
|> extrude(length = height)
|
|
|
|
// Sketch and extrude a rectangular shape to create the shell underneath the lego. Will replace with shell function when able to call a face created from shell.
|
|
shellExtrude = startSketchOn(base, face = START)
|
|
|> startProfile(at = [
|
|
-(totalWidth / 2 - t),
|
|
-(totalLength / 2 - t)
|
|
])
|
|
|> line(end = [totalWidth - (2 * t), 0])
|
|
|> line(end = [0, totalLength - (2 * t)])
|
|
|> line(end = [-(totalWidth - (2 * t)), 0])
|
|
|> close()
|
|
|> extrude(length = -(height - t))
|
|
|
|
// Create the pegs on the top of the base
|
|
peg = startSketchOn(base, face = END)
|
|
|> circle(
|
|
center = [
|
|
-(pitch * (wbumps - 1) / 2),
|
|
-(pitch * (lbumps - 1) / 2)
|
|
],
|
|
radius = bumpDiam / 2,
|
|
)
|
|
|> patternLinear2d(axis = [1, 0], instances = wbumps, distance = pitch)
|
|
|> patternLinear2d(axis = [0, 1], instances = lbumps, distance = pitch)
|
|
|> extrude(length = bumpHeight)
|
|
|
|
// Create the pegs on the bottom of the base
|
|
tubePattern = startSketchOn(shellExtrude, face = START)
|
|
|> circle(
|
|
center = [
|
|
-(pitch * (wbumps - 1) / 2 - (pitch / 2)),
|
|
-(pitch * (lbumps - 1) / 2 - (pitch / 2))
|
|
],
|
|
radius = bumpDiam / 2,
|
|
)
|
|
|> patternLinear2d(axis = [1, 0], instances = wbumps - 1, distance = pitch)
|
|
|> patternLinear2d(axis = [0, 1], instances = lbumps - 1, distance = pitch)
|
|
|> extrude(length = bumpHeight)
|