0ea0d1703e
* Remove deprecated syntax Signed-off-by: Nick Cameron <nrc@ncameron.org> * fix one test * fix sketch on revolved face test * fix test: empty-scene default-planes act as expected * fix up more tests * another fix * remove another const --------- Signed-off-by: Nick Cameron <nrc@ncameron.org> Co-authored-by: Kurt Hutten Irev-Dev <k.hutten@protonmail.ch>
45 lines
1.5 KiB
Plaintext
45 lines
1.5 KiB
Plaintext
// Shelf Bracket
|
|
// This is a shelf bracket made out of 6061-T6 aluminum sheet metal. The required thickness is calculated based on a point load of 300 lbs applied to the end of the shelf. There are two brackets holding up the shelf, so the moment experienced is divided by 2. The shelf is 1 foot long from the wall.
|
|
|
|
// Define our bracket feet lengths
|
|
shelfMountL = 8 // The length of the bracket holding up the shelf is 6 inches
|
|
wallMountL = 6 // the length of the bracket
|
|
|
|
// Define constants required to calculate the thickness needed to support 300 lbs
|
|
sigmaAllow = 35000 // psi
|
|
width = 6 // inch
|
|
p = 300 // Force on shelf - lbs
|
|
L = 12 // inches
|
|
M = L * p / 2 // Moment experienced at fixed end of bracket
|
|
FOS = 2 // Factor of safety of 2 to be conservative
|
|
|
|
// Calculate the thickness off the bending stress and factor of safety
|
|
thickness = sqrt(6 * M * FOS / (width * sigmaAllow))
|
|
|
|
// 0.25 inch filradius
|
|
filletR = 0.25
|
|
|
|
// Sketch the bracket and extrude with fillets
|
|
bracket = startSketchOn(XY)
|
|
|> startProfile(at = [0, 0])
|
|
|> line(end = [0, wallMountL], tag = 'outerEdge')
|
|
|> line(end = [-shelfMountL, 0])
|
|
|> line(end = [0, -thickness])
|
|
|> line(end = [shelfMountL - thickness, 0], tag = 'innerEdge')
|
|
|> line(end = [0, -wallMountL + thickness])
|
|
|> close()
|
|
|> extrude(length = width)
|
|
|> fillet(
|
|
radius = filletR,
|
|
tags = [
|
|
getPreviousAdjacentEdge('innerEdge', %)
|
|
]
|
|
)
|
|
|> fillet(
|
|
radius = filletR + thickness,
|
|
tags = [
|
|
getPreviousAdjacentEdge('outerEdge', %)
|
|
]
|
|
)
|
|
|