d275995dfe
We continue migrating KCL stdlib functions to use keyword arguments. Next up is the `angledLine` family of functions (except `angledLineThatIntersects, which will be a quick follow-up).
Before vs. after:
`angledLine({angle = 90, length = 3}, %, $edge)`
=> `angledLine(angle = 90, length = 3, tag = $edge)`
`angledLineOfXLength({angle = 90, length = 3}, %, $edge)`
=> `angledLine(angle = 90, lengthX = 3, tag = $edge)`
`angledLineOfYLength({angle = 90, length = 3}, %, $edge)`
=> `angledLine(angle = 90, lengthY = 3, tag = $edge)`
`angledLineToX({angle = 90, length = 3}, %, $edge)`
=> `angledLine(angle = 90, endAbsoluteX = 3, tag = $edge)`
`angledLineToY({angle = 90, length = 3}, %, $edge)`
=> `angledLine(angle = 90, endAbsoluteY = 3, tag = $edge)`
58 lines
1.6 KiB
Plaintext
58 lines
1.6 KiB
Plaintext
export boltDiameter = 0.625
|
|
export boltLength = 2.500
|
|
export boltHeadLength = boltDiameter
|
|
export boltHeadDiameter = 0.938
|
|
export boltHexDrive = 1 / 2
|
|
export boltHexFlatLength = boltHexDrive / (2 * cos(toRadians(30)))
|
|
export boltThreadLength = 1.75
|
|
|
|
export fn bolt() {
|
|
// Create the head of the cap screw
|
|
boltHead = startSketchOn('XZ')
|
|
|> circle(center = [0, 0], radius = boltHeadDiameter / 2, tag = $topEdge)
|
|
|> extrude(length = -boltHeadLength)
|
|
|> fillet(radius = 0.020, tags = [topEdge, getOppositeEdge(topEdge)])
|
|
|
|
// Define the sketch of the hex pattern on the screw head
|
|
hexPatternSketch = startSketchOn(boltHead, 'start')
|
|
|> startProfileAt([
|
|
boltHexDrive / 2,
|
|
boltHexFlatLength / 2
|
|
], %)
|
|
|> angledLine(
|
|
angle = 270,
|
|
length = boltHexFlatLength,
|
|
)
|
|
|> angledLine(
|
|
angle = 210,
|
|
length = boltHexFlatLength,
|
|
)
|
|
|> angledLine(
|
|
angle = 150,
|
|
length = boltHexFlatLength,
|
|
)
|
|
|> angledLine(
|
|
angle = 90,
|
|
length = boltHexFlatLength,
|
|
)
|
|
|> angledLine(
|
|
angle = 30,
|
|
length = boltHexFlatLength,
|
|
)
|
|
|> close()
|
|
|> extrude(length = -boltHeadLength * 0.75)
|
|
|
|
boltBody = startSketchOn(boltHead, 'end')
|
|
|> circle(center = [0, 0], radius = boltDiameter / 2, tag = $filletEdge)
|
|
|> extrude(length = boltLength)
|
|
|> fillet(radius = .020, tags = [getOppositeEdge(filletEdge)])
|
|
|> appearance(color = "#4dd043", metalness = 90, roughness = 90)
|
|
|
|
return boltBody
|
|
}
|
|
|
|
bolt()
|
|
|> rotate(roll = 3.14, pitch = 3.14, yaw = 3.14)
|
|
|
|
// https://www.mcmaster.com/91251a404/
|