modeling-app/public/kcl-samples/poopy-shoe/main.kcl

// Poopy Shoe
// poop shute for bambu labs printer - optimized for printing.

// Set units
@settings(defaultLengthUnit = in)

wallThickness = 0.125
wallsWidth = 3
height = 5.125
filletRadius = 0.050
backLength = 6
exitHeight = 1
frontLength = 7

sketch001 = startSketchOn("-YZ")
  |> startProfileAt([wallsWidth / 2, 0], %)
  |> xLine(length = wallThickness / 2)
  |> angledLineToX({ angle = 60, to = wallsWidth }, %, $seg01)
  |> yLine(endAbsolute = height)
  |> xLine(length = -wallThickness)
  |> yLine(endAbsolute = segEndY(seg01))
  |> angledLineToX({
       angle = 60,
       to = wallsWidth / 2 + wallThickness / 2
     }, %)
  |> xLine(length = -wallThickness)
  |> angledLineToX({ angle = 180 - 60, to = wallThickness }, %)
  |> yLine(endAbsolute = height)
  |> xLine(endAbsolute = 0)
  |> yLine(endAbsolute = segEndY(seg01))
  |> angledLineToY({ angle = 180 - 60, to = 0 }, %)
  |> close()
part001 = revolve(
  sketch001,
  angle = 90,
  axis = {
    custom = {
      axis = [1.0, 0.0],
      origin = [0.0, height + .0001]
    }
  }
)

sketch002 = startSketchOn('-YZ')
  |> startProfileAt([wallsWidth / 2, 0], %)
  |> xLine(length = wallThickness / 2)
  |> angledLineToX({ angle = 60, to = wallsWidth }, %, $seg02)
  |> yLine(endAbsolute = height)
  |> xLine(length = -wallThickness)
  |> yLine(endAbsolute = segEndY(seg01))
  |> angledLineToX({
       angle = 60,
       to = wallsWidth / 2 + wallThickness / 2
     }, %)
  |> xLine(length = -wallThickness)
  |> angledLineToX({ angle = 180 - 60, to = wallThickness }, %)
  |> yLine(endAbsolute = height)
  |> xLine(endAbsolute = 0)
  |> yLine(endAbsolute = segEndY(seg02))
  |> angledLineToY({ angle = 180 - 60, to = 0 }, %)
  |> close()
  |> extrude(length = backLength - height)

customPlane = {
  plane = {
    origin = {
      x = 0,
      y = -(wallsWidth / 2 - (wallThickness / 2)),
      z = 0
    },
    xAxis = { x = 1, y = 0, z = 0 },
    yAxis = { x = 0, y = 0, z = 1 },
    zAxis = { x = 0, y = -1, z = 0 }
  }
}
sketch003 = startSketchOn(customPlane)
  |> startProfileAt([0, 0], %)
  |> tangentialArc({ offset = 60, radius = height }, %)
  |> angledLineToY({ angle = 60, to = 0 }, %)
  |> close()
  |> extrude(length = wallThickness)

sketch004 = startSketchOn(sketch002, 'END')
  |> startProfileAt([0, 0], %)
  |> yLine(endAbsolute = height)
  |> xLine(endAbsolute = wallThickness)
  |> yLine(endAbsolute = segEndY(seg01))
  |> angledLineToX({
       angle = 180 - 60,
       to = wallsWidth / 2 - (wallThickness / 2)
     }, %)
  |> xLine(length = wallThickness)
  |> angledLineToY({ angle = 60, to = segEndY(seg01) }, %)
  |> yLine(endAbsolute = height)
  |> xLine(length = wallThickness)
  |> tangentialArcTo([
       (frontLength - wallsWidth) / 2 + wallsWidth,
       height - ((height - exitHeight) / 2)
     ], %)
  |> tangentialArcTo([frontLength, exitHeight], %)
  |> yLine(endAbsolute = 0)
  |> close(tag = $seg04)
  |> extrude(length = wallThickness)

customPlane2 = {
  plane = {
    origin = {
      x = -1 * (backLength - height + wallsWidth),
      y = 0,
      z = 0
    },
    xAxis = { x = 0, y = -1, z = 0 },
    yAxis = { x = 0, y = 0, z = 1 },
    zAxis = { x = 1, y = 0, z = 0 }
  }
}
sketch005 = startSketchOn(customPlane2)
  |> startProfileAt([0, 0], %)
  |> yLine(endAbsolute = height)
  |> xLine(endAbsolute = wallsWidth)
  |> tangentialArcTo([
       (frontLength - wallsWidth) / 2 + wallsWidth,
       height - ((height - exitHeight) / 2)
     ], %)
  |> tangentialArcTo([frontLength, exitHeight], %)
  |> yLine(endAbsolute = 0, tag = $seg03)
  |> close()
  |> extrude(length = wallThickness)

sketch006 = startSketchOn(sketch005, seg03)
  |> startProfileAt([0, -1 * (backLength - height)], %)
  |> xLine(endAbsolute = -exitHeight)
  |> yLine(length = -wallsWidth)
  |> xLine(endAbsolute = 0)
  |> close()
  |> extrude(length = wallThickness)

sketch007 = startSketchOn(sketch004, 'END')
  |> startProfileAt([0, 0], %)
  |> xLine(endAbsolute = wallThickness)
  |> yLine(endAbsolute = height)
  |> xLine(endAbsolute = 0)
  |> close()
  |> extrude(length = wallsWidth - (2 * wallThickness))

customPlane3 = {
  plane = {
    origin = {
      x = -1 * (backLength - height + wallsWidth),
      y = 0,
      z = wallThickness
    },
    xAxis = { x = 0, y = -1, z = 0 },
    yAxis = { x = 1, y = 0, z = 0 },
    zAxis = { x = 0, y = 0, z = 1 }
  }
}

sketch008 = startSketchOn(customPlane3)
  |> startProfileAt([wallThickness, wallThickness], %)
  |> xLine(endAbsolute = frontLength)
  |> yLine(length = wallsWidth - (2 * wallThickness))
  |> xLine(endAbsolute = wallThickness)
  |> close()
  |> extrude(length = -wallThickness)