145 lines
4.5 KiB
Plaintext
145 lines
4.5 KiB
Plaintext
// Food Service Spatula
|
|
// Use these spatulas for mixing, flipping, and scraping.
|
|
|
|
// Set units
|
|
@settings(defaultLengthUnit = mm)
|
|
|
|
// Define parameters
|
|
flipperThickness = 3.5
|
|
flipperLength = 70.0
|
|
handleWidth = 15.0
|
|
gripLength = 150.0
|
|
flipperFilletRadius = 5.0
|
|
flipperSlotWidth = 10.0
|
|
gripWidth = 10.0
|
|
gripHeight = 20.0
|
|
gripFilletRadius = 3.0
|
|
gripSlotWidth = 8.0
|
|
|
|
// Function for drawing slots on a sketch given the start and end points as well as a width
|
|
fn slot(sketch1, start, end, width) {
|
|
angle = if start[0] == end[0] {
|
|
if end[1] > start[1] {
|
|
90
|
|
} else {
|
|
270
|
|
}
|
|
} else {
|
|
if end[0] < start[0] {
|
|
toDegrees(atan((end[1] - start[1]) / (end[0] - start[0]))) + 180
|
|
} else {
|
|
toDegrees( atan((end[1] - start[1]) / (end[0] - start[0])))
|
|
}
|
|
}
|
|
dist = sqrt(pow(end[1] - start[1], 2) + pow(end[0] - start[0], 2))
|
|
xstart = width / 2 * cos(toRadians(angle - 90)) + start[0]
|
|
ystart = width / 2 * sin(toRadians(angle - 90)) + start[1]
|
|
slotSketch = startProfileAt([xstart, ystart], sketch1)
|
|
|> angledLine(angle = angle, length = dist)
|
|
|> tangentialArc(radius = width / 2, angle = 180)
|
|
|> angledLine(angle = angle, length = -dist)
|
|
|> tangentialArc(endAbsolute = [profileStartX(%), profileStartY(%)])
|
|
|> close()
|
|
return slotSketch
|
|
}
|
|
|
|
// Create a sketch on the "XY" plane for the flipper
|
|
flipperSketch = startSketchOn(XY)
|
|
|
|
// Create a profile of the flipper
|
|
flipperProfile = startProfileAt([-flipperLength, -32.0], flipperSketch)
|
|
|> line(end = [flipperLength, 2.0])
|
|
|> yLine(length = 60.0, tag = $backEdge)
|
|
|> line(end = [-flipperLength, 2.0])
|
|
|> arc(angleStart = 163.087610, angleEnd = 196.912390, radius = 110.0)
|
|
|> close()
|
|
|
|
// Create a profile of the middle
|
|
slotProfile000 = slot(flipperSketch, [-25, 0], [-55, 0], flipperSlotWidth)
|
|
|
|
// Create a profile of the top slot
|
|
slotProfile001 = slot(flipperSketch, [-25, 18], [-55, 19], flipperSlotWidth)
|
|
|
|
// Create a profile of the bottom slot
|
|
slotProfile002 = slot(flipperSketch, [-25, -18], [-55, -19], flipperSlotWidth)
|
|
|
|
// Create a profile with slots for the spatula
|
|
spatulaProfile = flipperProfile
|
|
|> hole(slotProfile000, %)
|
|
|> hole(slotProfile001, %)
|
|
|> hole(slotProfile002, %)
|
|
|
|
// Extrude the profile to create the spatula flipper
|
|
flipper = extrude(spatulaProfile, length = flipperThickness)
|
|
|
|
// Fillet the edges of the flipper
|
|
fillet(
|
|
flipper,
|
|
radius = flipperFilletRadius,
|
|
tags = [
|
|
getNextAdjacentEdge(backEdge),
|
|
getPreviousAdjacentEdge(backEdge)
|
|
],
|
|
)
|
|
|
|
// Create a sketch on the "XZ" plane offset by half the thickness
|
|
handleSketch = startSketchOn(offsetPlane(XZ, offset = -handleWidth / 2))
|
|
|
|
// Create a profile of the spatula handle
|
|
handleProfile = startProfileAt([0.0, flipperThickness], handleSketch)
|
|
|> line(end = [31.819805, 31.819805], tag = $handleBottomEdge)
|
|
|> line(end = [140.953893, 51.303021])
|
|
|> line(end = [-1.710101, 4.698463])
|
|
|> line(end = [-141.995517, -51.682142], tag = $handleTopEdge)
|
|
|> line(end = [-36.139148, -36.139148])
|
|
|> xLine(length = 7.071068)
|
|
|> close()
|
|
|
|
// Create an extrusion
|
|
handle = extrude(handleProfile, length = handleWidth)
|
|
|
|
// Fillet the bend of the spatula handle
|
|
fillet(
|
|
handle,
|
|
radius = 4,
|
|
tags = [
|
|
getNextAdjacentEdge(handleBottomEdge),
|
|
getNextAdjacentEdge(handleTopEdge)
|
|
],
|
|
)
|
|
|
|
// Define a plane which is at the end of the handle
|
|
handlePlane = {
|
|
origin = [208.593833, 0.0, 75.921946],
|
|
xAxis = [0.342020, -0.0, -0.939693],
|
|
yAxis = [0.0, 1.0, 0.0],
|
|
zAxis = [0.939693, -0.0, 0.342020]
|
|
}
|
|
|
|
// Create a sketch on the handle plane
|
|
gripSketch = startSketchOn(handlePlane)
|
|
|
|
// Create a profile of the grip
|
|
gripProfile = startProfileAt([-26.806746, -10.0], gripSketch)
|
|
|> xLine(length = gripWidth - (2 * gripFilletRadius))
|
|
|> arc(angleStart = -90.0, angleEnd = 0.0, radius = gripFilletRadius)
|
|
|> yLine(length = gripHeight - (2 * gripFilletRadius))
|
|
|> arc(angleStart = 0.0, angleEnd = 90.0, radius = gripFilletRadius)
|
|
|> xLine(length = -(gripWidth - (2 * gripFilletRadius)))
|
|
|> arc(angleStart = 90.0, angleEnd = 180.0, radius = gripFilletRadius)
|
|
|> yLine(length = -(gripHeight - (2 * gripFilletRadius)), tag = $gripEdgeTop)
|
|
|> arc(angleStart = 180.0, angleEnd = 270.0, radius = gripFilletRadius)
|
|
|> close()
|
|
|
|
// Extrude the grip profile to create the grip
|
|
grip = extrude(gripProfile, length = -gripLength)
|
|
|
|
// Create a sketch on the grip for the hole
|
|
holeSketch = startSketchOn(grip, face = gripEdgeTop)
|
|
|
|
// Create a profile for the grip hole
|
|
gripHoleProfile = slot(holeSketch, [0, 200], [0, 210], gripSlotWidth)
|
|
|
|
// Cut a hole in the grip
|
|
extrude(gripHoleProfile, length = -gripWidth - 20)
|