biump

Signed-off-by: Jess Frazelle <github@jessfraz.com>

.github/workflows/black.yml

@@ -1,38 +0,0 @@
-name: black
-on:
-  push:
-    branches: main
-    paths:
-      - '**.py'
-      - .github/workflows/black.yml
-      - 'pyproject.toml'
-  pull_request:
-    paths:
-      - '**.py'
-      - .github/workflows/black.yml
-      - 'pyproject.toml'
-jobs:
-  black:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v3
-      - name: Set up Python
-        uses: actions/setup-python@v4
-
-      # Installation instructions are from: https://python-poetry.org/docs/
-      - name: Install dependencies
-        shell: bash
-        run: |
-          pip install \
-          poetry
-
-      - name: Build
-        shell: bash
-        run: |
-          poetry install
-          poetry build
-
-      - name: Run black
-        shell: bash
-        run: |
-          poetry run black --check --diff . generate/generate.py docs/conf.py kittycad/client_test.py kittycad/examples_test.py

.github/workflows/build-test.yml

@@ -5,26 +5,22 @@ on:
     paths:
       - '**.py'
       - .github/workflows/build-test.yml
-      - 'pyproject.toml'
-      - 'spec.json'
   pull_request:
     paths:
       - '**.py'
       - .github/workflows/build-test.yml
-      - 'pyproject.toml'
-      - 'spec.json'
 jobs:
   build-test:
 
     runs-on: ubuntu-latest
     strategy:
       matrix:
-        python-version: [3.8, 3.9]
+        python-version: [3.6, 3.7, 3.8, 3.9]
 
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v2
       - name: Set up Python ${{ matrix.python-version }}
-        uses: actions/setup-python@v4
+        uses: actions/setup-python@v2
         with:
           python-version: ${{ matrix.python-version }}
 
@@ -41,6 +37,14 @@ jobs:
           poetry install
           poetry build
 
+      - name: Lint with flake8
+        shell: bash
+        run: |
+          # stop the build if there are Python syntax errors or undefined names
+          poetry run flake8 . --count --select=E9,F63,F7,F82 --show-source --statistics
+          # exit-zero treats all errors as warnings. The GitHub editor is 127 chars wide
+          poetry run flake8 . --count --exit-zero --max-complexity=10 --max-line-length=127 --statistics
+
       - name: Run pytest
         shell: bash
         run: |
@@ -49,7 +53,7 @@ jobs:
           KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN}}
 
       - name: Upload coverage to Codecov
-        uses: codecov/codecov-action@v3
+        uses: codecov/codecov-action@v2
         with:
           token: ${{ secrets.CODECOV_TOKEN }}
           fail_ci_if_error: true

.github/workflows/generate-docs.yml

@@ -9,15 +9,21 @@ on:
       - '**.rst'
       - '**.py'
       - .github/workflows/generate-docs.yml
+  pull_request:
+    paths:
+      - docs/conf.py
+      - '**.rst'
+      - '**.py'
+      - .github/workflows/generate-docs.yml
 jobs:
   generate-docs:
 
     runs-on: ubuntu-latest
 
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v2
       - name: Set up Python
-        uses: actions/setup-python@v4
+        uses: actions/setup-python@v2
         with:
           python-version: 3.x
 

.github/workflows/generate.yml

@@ -6,8 +6,6 @@ on:
     paths:
       - 'Makefile'
       - .github/workflows/generate.yml
-      - 'spec.json'
-      - 'generate/generate.py'
   workflow_dispatch:
     inputs:
 jobs:
@@ -16,15 +14,13 @@ jobs:
     if: ${{ github.event.pull_request.head.repo.full_name == github.repository }}
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v2
         with:
           ref: ${{ github.event.pull_request.head.ref }}
       - name: Run generate
         shell: bash
         run: |
           make generate
-        env:
-          KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN}}
 
       - name: Check for modified files
         id: git-check
@@ -37,6 +33,5 @@ jobs:
           git config --local user.name "github-actions[bot]"
           git remote set-url origin https://${{ github.actor }}:${{ secrets.GITHUB_TOKEN }}@github.com/${{ github.repository }}.git
           git fetch origin
-          git add .
           git commit -am "I have generated the latest API!" || true
           git push origin ${{github.event.pull_request.head.ref }} || true

.github/workflows/make-release.yml

@@ -8,8 +8,8 @@ jobs:
     name: make-release
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
-      - uses: actions/setup-python@v4
+      - uses: actions/checkout@v2
+      - uses: actions/setup-python@v2
         with:
           python-version: '3.x'
       # Installation instructions are from: https://python-poetry.org/docs/

.github/workflows/mypy.yml

@@ -1,38 +0,0 @@
-name: mypy
-on:
-  push:
-    branches: main
-    paths:
-      - '**.py'
-      - .github/workflows/mypy.yml
-      - 'pyproject.toml'
-  pull_request:
-    paths:
-      - '**.py'
-      - .github/workflows/mypy.yml
-      - 'pyproject.toml'
-jobs:
-  mypy:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v3
-      - name: Set up Python
-        uses: actions/setup-python@v4
-
-      # Installation instructions are from: https://python-poetry.org/docs/
-      - name: Install dependencies
-        shell: bash
-        run: |
-          pip install \
-          poetry
-
-      - name: Build
-        shell: bash
-        run: |
-          poetry install
-          poetry build
-
-      - name: Run mypy
-        shell: bash
-        run: |
-          poetry run mypy .

.github/workflows/ruff.yml

@@ -1,38 +0,0 @@
-name: ruff
-on:
-  push:
-    branches: main
-    paths:
-      - '**.py'
-      - .github/workflows/ruff.yml
-      - 'pyproject.toml'
-  pull_request:
-    paths:
-      - '**.py'
-      - .github/workflows/ruff.yml
-      - 'pyproject.toml'
-jobs:
-  ruff:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v3
-      - name: Set up Python
-        uses: actions/setup-python@v4
-
-      # Installation instructions are from: https://python-poetry.org/docs/
-      - name: Install dependencies
-        shell: bash
-        run: |
-          pip install \
-          poetry
-
-      - name: Build
-        shell: bash
-        run: |
-          poetry install
-          poetry build
-
-      - name: Run ruff
-        shell: bash
-        run: |
-          poetry run ruff check --format=github .

.github/workflows/update-spec-for-docs.yml

@@ -1,67 +0,0 @@
-on:
-  push:
-    tags:
-      - v*
-  pull_request:
-    paths:
-      - .github/workflows/update-spec-for-docs.yml
-  workflow_dispatch:
-name: update spec for docs
-concurrency:
-  group: docs-${{ github.ref }}
-  cancel-in-progress: true
-jobs:
-  update-spec:
-    name: update-spec
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v3
-      - name: make generate
-        shell: bash
-        run: |
-          make generate
-        env:
-          KITTYCAD_API_TOKEN: ${{secrets.KITTYCAD_API_TOKEN}}
-      # Ensure no files changed.
-      - name: Ensure no files changed
-        shell: bash
-        run: |
-          if [[ `git status --porcelain kittycad/` ]]; then
-            echo "Files changed, exiting";
-            exit 1;
-          else
-            # No changes
-            echo "No files changed, proceeding";
-          fi
-      # Checkout the docs repo since we will want to update the files there.
-      - uses: actions/checkout@v3
-        with:
-          repository: 'kittycad/website'
-          path: 'docs'
-          token: ${{secrets.PAT_GITHUB}}
-      - name: move spec to docs
-        shell: bash
-        run: |
-          rm docs/kittycad.py.patch.json || true
-          cp kittycad.py.patch.json docs/kittycad.py.patch.json
-      - name: commit the changes in the docs repo
-        shell: bash
-        run: |
-          cd docs
-          git config --local user.email "github-actions[bot]@users.noreply.github.com"
-          git config --local user.name "github-actions[bot]"
-          git add .
-          git commit -am "YOYO NEW SPEC PYTHON DOCS!" || exit 0
-          git fetch origin
-          git rebase origin/main || exit 0
-          export NEW_BRANCH="update-spec-python"
-          git checkout -b "$NEW_BRANCH"
-          git push -f origin "$NEW_BRANCH"
-          gh pr create --title "Update lang spec docs for python" \
-              --body "Updating the generated docs for python" \
-              --head "$NEW_BRANCH" \
-              --base main || true
-        env:
-          GITHUB_TOKEN: ${{secrets.PAT_GITHUB}}
-
-

.gitignore

@@ -23,9 +23,3 @@ dmypy.json
 /.coverage
 
 poetry.lock
-testing
-
-# Sphinx documentation
-docs/_build/
-docs/_autosummary/
-docs/html/_sources/

Dockerfile

@@ -1,13 +1,7 @@
-FROM python:3.9
+FROM python:latest
 
 RUN pip install \
-	poetry
-
-WORKDIR /home/user/src/
-
-COPY . /home/user/src/
-
-RUN poetry update && poetry install
+	openapi-python-client
 
 # Set the default command to bash.
 CMD ["bash"]

Makefile

@@ -10,25 +10,14 @@ endif
 VERSION := $(shell toml get $(CURDIR)/pyproject.toml tool.poetry.version | jq -r .)
 
 .PHONY: generate
-generate: docker-image ## Generate the api client.
+generate: docker-image
 	docker run --rm -i $(DOCKER_FLAGS) \
 		--name python-generator \
-		-e KITTYCAD_API_TOKEN \
-		--disable-content-trust \
-		-v $(CURDIR):/home/user/src \
-		--workdir /home/user/src \
-		$(DOCKER_IMAGE_NAME) ./generate/run.sh
-
-.PHONY: shell
-shell: docker-image ## Pop into a shell in the docker image.
-	docker run --rm -i $(DOCKER_FLAGS) \
-		--name python-generator-shell \
-		-e KITTYCAD_API_TOKEN \
-		--disable-content-trust \
-		-v $(CURDIR):/home/user/src \
-		--workdir /home/user/src \
-		$(DOCKER_IMAGE_NAME) /bin/bash
-
+		-v $(CURDIR):/usr/kittycad \
+		--workdir /usr \
+		$(DOCKER_IMAGE_NAME) openapi-python-client update \
+			--url https://api.kittycad.io \
+			--config /usr/kittycad/config.yml
 
 .PHONY: docker-image
 docker-image:

README.md

@@ -1,9 +1,10 @@
-![image](https://user-images.githubusercontent.com/19377312/165883233-3bdbc9fb-ddf9-4173-8cf2-d1b70ab7127d.png)
-
 # kittycad.py
 
 The Python API client for KittyCAD.
 
+This is generated from
+[openapi-generators/openapi-python-client](https://github.com/openapi-generators/openapi-python-client).
+
 - [PyPI](https://pypi.org/project/kittycad/)
 - [Python docs](https://python.api.docs.kittycad.io/)
 - [KittyCAD API Docs](https://docs.kittycad.io/?lang=python)
@@ -25,3 +26,44 @@ $ make generate
 
 Please do not change the code directly since it is generated. PRs that change
 the code directly will be automatically closed by a bot.
+
+## Usage
+First, create an authenticated client:
+
+```python
+from kittycad import AuthenticatedClient
+
+client = AuthenticatedClient(token="your_token")
+```
+
+If you want to use the environment variable `KITTYCAD_API_TOKEN` to do
+authentication and not pass one to the client, do the following:
+
+```python
+from kittycad import AuthenticatedClientFromEnv
+
+client = AuthenticatedClientFromEnv()
+```
+
+Now call your endpoint and use your models:
+
+```python
+from kittycad.models import AuthSession
+from kittycad.api.meta import meta_debug_session
+from kittycad.types import Response
+
+session: AuthSession = meta_debug_session.sync(client=client)
+# or if you need more info (e.g. status_code)
+response: Response[AuthSession] = meta_debug_session.sync_detailed(client=client)
+```
+
+Or do the same thing with an async version:
+
+```python
+from kittycad.models import AuthSession
+from kittycad.api.meta import meta_debug_session
+from kittycad.types import Response
+
+session: AuthSession = await meta_debug_session.asyncio(client=client)
+response: Response[AuthSession] = await meta_debug_session.asyncio_detailed(client=client)
+```

config.yml

@@ -0,0 +1,2 @@
+project_name_override: kittycad
+package_name_override: kittycad

docs/_templates/custom-class-template.rst

@@ -1,33 +0,0 @@
-{{ fullname | escape | underline}}
-
-.. currentmodule:: {{ module }}
-
-.. autoclass:: {{ objname }}
-   :members:
-   :show-inheritance:
-   :inherited-members:
-
-   {% block methods %}
-   .. automethod:: __init__
-
-   {% if methods %}
-   .. rubric:: {{ _('Methods') }}
-
-   .. autosummary::
-   {% for item in methods %}
-      ~{{ name }}.{{ item }}
-   {%- endfor %}
-   {% endif %}
-   {% endblock %}
-
-   {% block attributes %}
-   {% if attributes %}
-   .. rubric:: {{ _('Attributes') }}
-
-   .. autosummary::
-   {% for item in attributes %}
-      ~{{ name }}.{{ item }}
-   {%- endfor %}
-   {% endif %}
-   {% endblock %}
-

docs/_templates/custom-module-template.rst

@@ -1,67 +0,0 @@
-{{ fullname | escape | underline}}
-
-.. automodule:: {{ fullname }}
-
-   {% block attributes %}
-   {% if attributes %}
-   .. rubric:: Module Attributes
-
-   .. autosummary::
-      :toctree:
-   {% for item in attributes %}
-      {{ item }}
-   {%- endfor %}
-   {% endif %}
-   {% endblock %}
-
-   {% block functions %}
-   {% if functions %}
-   .. rubric:: {{ _('Functions') }}
-
-   .. autosummary::
-      :toctree:
-   {% for item in functions %}
-      {{ item }}
-   {%- endfor %}
-   {% endif %}
-   {% endblock %}
-
-   {% block classes %}
-   {% if classes %}
-   .. rubric:: {{ _('Classes') }}
-
-   .. autosummary::
-      :toctree:
-      :template: custom-class-template.rst
-   {% for item in classes %}
-      {{ item }}
-   {%- endfor %}
-   {% endif %}
-   {% endblock %}
-
-   {% block exceptions %}
-   {% if exceptions %}
-   .. rubric:: {{ _('Exceptions') }}
-
-   .. autosummary::
-      :toctree:
-   {% for item in exceptions %}
-      {{ item }}
-   {%- endfor %}
-   {% endif %}
-   {% endblock %}
-
-{% block modules %}
-{% if modules %}
-.. rubric:: Modules
-
-.. autosummary::
-   :toctree:
-   :template: custom-module-template.rst
-   :recursive:
-{% for item in modules %}
-   {{ item }}
-{%- endfor %}
-{% endif %}
-{% endblock %}
-

docs/api/kittycad.AuthenticatedClient.rst

@@ -0,0 +1,17 @@
+AuthenticatedClient
+===================
+
+.. currentmodule:: kittycad
+
+.. autoclass:: AuthenticatedClient
+   :show-inheritance:
+
+   .. rubric:: Methods Summary
+
+   .. autosummary::
+
+      ~AuthenticatedClient.get_headers
+
+   .. rubric:: Methods Documentation
+
+   .. automethod:: get_headers

docs/api/kittycad.Client.rst

@@ -0,0 +1,27 @@
+Client
+======
+
+.. currentmodule:: kittycad
+
+.. autoclass:: Client
+   :show-inheritance:
+
+   .. rubric:: Methods Summary
+
+   .. autosummary::
+
+      ~Client.get_cookies
+      ~Client.get_headers
+      ~Client.get_timeout
+      ~Client.with_cookies
+      ~Client.with_headers
+      ~Client.with_timeout
+
+   .. rubric:: Methods Documentation
+
+   .. automethod:: get_cookies
+   .. automethod:: get_headers
+   .. automethod:: get_timeout
+   .. automethod:: with_cookies
+   .. automethod:: with_headers
+   .. automethod:: with_timeout

docs/api/kittycad.api.file.file_conversion_by_id.asyncio.rst

@@ -0,0 +1,6 @@
+asyncio
+=======
+
+.. currentmodule:: kittycad.api.file.file_conversion_by_id
+
+.. autofunction:: asyncio

docs/api/kittycad.api.file.file_conversion_by_id.asyncio_detailed.rst

@@ -0,0 +1,6 @@
+asyncio_detailed
+================
+
+.. currentmodule:: kittycad.api.file.file_conversion_by_id
+
+.. autofunction:: asyncio_detailed

docs/api/kittycad.api.file.file_conversion_by_id.sync.rst

@@ -0,0 +1,6 @@
+sync
+====
+
+.. currentmodule:: kittycad.api.file.file_conversion_by_id
+
+.. autofunction:: sync

docs/api/kittycad.api.file.file_conversion_by_id.sync_detailed.rst

@@ -0,0 +1,6 @@
+sync_detailed
+=============
+
+.. currentmodule:: kittycad.api.file.file_conversion_by_id
+
+.. autofunction:: sync_detailed

docs/api/kittycad.api.file.file_conversion_by_id_with_base64_helper.asyncio.rst

@@ -0,0 +1,6 @@
+asyncio
+=======
+
+.. currentmodule:: kittycad.api.file.file_conversion_by_id_with_base64_helper
+
+.. autofunction:: asyncio

docs/api/kittycad.api.file.file_conversion_by_id_with_base64_helper.sync.rst

@@ -0,0 +1,6 @@
+sync
+====
+
+.. currentmodule:: kittycad.api.file.file_conversion_by_id_with_base64_helper
+
+.. autofunction:: sync

docs/api/kittycad.api.file.file_convert.asyncio.rst

@@ -0,0 +1,6 @@
+asyncio
+=======
+
+.. currentmodule:: kittycad.api.file.file_convert
+
+.. autofunction:: asyncio

docs/api/kittycad.api.file.file_convert.asyncio_detailed.rst

@@ -0,0 +1,6 @@
+asyncio_detailed
+================
+
+.. currentmodule:: kittycad.api.file.file_convert
+
+.. autofunction:: asyncio_detailed

docs/api/kittycad.api.file.file_convert.sync.rst

@@ -0,0 +1,6 @@
+sync
+====
+
+.. currentmodule:: kittycad.api.file.file_convert
+
+.. autofunction:: sync

docs/api/kittycad.api.file.file_convert.sync_detailed.rst

@@ -0,0 +1,6 @@
+sync_detailed
+=============
+
+.. currentmodule:: kittycad.api.file.file_convert
+
+.. autofunction:: sync_detailed

docs/api/kittycad.api.file.file_convert_with_base64_helper.asyncio.rst

@@ -0,0 +1,6 @@
+asyncio
+=======
+
+.. currentmodule:: kittycad.api.file.file_convert_with_base64_helper
+
+.. autofunction:: asyncio

docs/api/kittycad.api.file.file_convert_with_base64_helper.sync.rst

@@ -0,0 +1,6 @@
+sync
+====
+
+.. currentmodule:: kittycad.api.file.file_convert_with_base64_helper
+
+.. autofunction:: sync

docs/api/kittycad.api.meta.meta_debug_instance.asyncio.rst

@@ -0,0 +1,6 @@
+asyncio
+=======
+
+.. currentmodule:: kittycad.api.meta.meta_debug_instance
+
+.. autofunction:: asyncio

docs/api/kittycad.api.meta.meta_debug_instance.asyncio_detailed.rst

@@ -0,0 +1,6 @@
+asyncio_detailed
+================
+
+.. currentmodule:: kittycad.api.meta.meta_debug_instance
+
+.. autofunction:: asyncio_detailed

docs/api/kittycad.api.meta.meta_debug_instance.sync.rst

@@ -0,0 +1,6 @@
+sync
+====
+
+.. currentmodule:: kittycad.api.meta.meta_debug_instance
+
+.. autofunction:: sync

docs/api/kittycad.api.meta.meta_debug_instance.sync_detailed.rst

@@ -0,0 +1,6 @@
+sync_detailed
+=============
+
+.. currentmodule:: kittycad.api.meta.meta_debug_instance
+
+.. autofunction:: sync_detailed

docs/api/kittycad.api.meta.meta_debug_session.asyncio.rst

@@ -0,0 +1,6 @@
+asyncio
+=======
+
+.. currentmodule:: kittycad.api.meta.meta_debug_session
+
+.. autofunction:: asyncio

docs/api/kittycad.api.meta.meta_debug_session.asyncio_detailed.rst

@@ -0,0 +1,6 @@
+asyncio_detailed
+================
+
+.. currentmodule:: kittycad.api.meta.meta_debug_session
+
+.. autofunction:: asyncio_detailed

docs/api/kittycad.api.meta.meta_debug_session.sync.rst

@@ -0,0 +1,6 @@
+sync
+====
+
+.. currentmodule:: kittycad.api.meta.meta_debug_session
+
+.. autofunction:: sync

docs/api/kittycad.api.meta.meta_debug_session.sync_detailed.rst

@@ -0,0 +1,6 @@
+sync_detailed
+=============
+
+.. currentmodule:: kittycad.api.meta.meta_debug_session
+
+.. autofunction:: sync_detailed

docs/api/kittycad.api.meta.ping.asyncio.rst

@@ -0,0 +1,6 @@
+asyncio
+=======
+
+.. currentmodule:: kittycad.api.meta.ping
+
+.. autofunction:: asyncio

docs/api/kittycad.api.meta.ping.asyncio_detailed.rst

@@ -0,0 +1,6 @@
+asyncio_detailed
+================
+
+.. currentmodule:: kittycad.api.meta.ping
+
+.. autofunction:: asyncio_detailed

docs/api/kittycad.api.meta.ping.sync.rst

@@ -0,0 +1,6 @@
+sync
+====
+
+.. currentmodule:: kittycad.api.meta.ping
+
+.. autofunction:: sync

docs/api/kittycad.api.meta.ping.sync_detailed.rst

@@ -0,0 +1,6 @@
+sync_detailed
+=============
+
+.. currentmodule:: kittycad.api.meta.ping
+
+.. autofunction:: sync_detailed

docs/api/kittycad.client.AuthenticatedClient.rst

@@ -0,0 +1,17 @@
+AuthenticatedClient
+===================
+
+.. currentmodule:: kittycad.client
+
+.. autoclass:: AuthenticatedClient
+   :show-inheritance:
+
+   .. rubric:: Methods Summary
+
+   .. autosummary::
+
+      ~AuthenticatedClient.get_headers
+
+   .. rubric:: Methods Documentation
+
+   .. automethod:: get_headers

docs/api/kittycad.client.AuthenticatedClientFromEnv.rst

@@ -0,0 +1,17 @@
+AuthenticatedClientFromEnv
+==========================
+
+.. currentmodule:: kittycad.client
+
+.. autoclass:: AuthenticatedClientFromEnv
+   :show-inheritance:
+
+   .. rubric:: Methods Summary
+
+   .. autosummary::
+
+      ~AuthenticatedClientFromEnv.get_headers
+
+   .. rubric:: Methods Documentation
+
+   .. automethod:: get_headers

docs/api/kittycad.client.Client.rst

@@ -0,0 +1,27 @@
+Client
+======
+
+.. currentmodule:: kittycad.client
+
+.. autoclass:: Client
+   :show-inheritance:
+
+   .. rubric:: Methods Summary
+
+   .. autosummary::
+
+      ~Client.get_cookies
+      ~Client.get_headers
+      ~Client.get_timeout
+      ~Client.with_cookies
+      ~Client.with_headers
+      ~Client.with_timeout
+
+   .. rubric:: Methods Documentation
+
+   .. automethod:: get_cookies
+   .. automethod:: get_headers
+   .. automethod:: get_timeout
+   .. automethod:: with_cookies
+   .. automethod:: with_headers
+   .. automethod:: with_timeout

docs/api/kittycad.models.AuthSession.rst

@@ -0,0 +1,29 @@
+AuthSession
+===========
+
+.. currentmodule:: kittycad.models
+
+.. autoclass:: AuthSession
+   :show-inheritance:
+
+   .. rubric:: Attributes Summary
+
+   .. autosummary::
+
+      ~AuthSession.additional_keys
+
+   .. rubric:: Methods Summary
+
+   .. autosummary::
+
+      ~AuthSession.from_dict
+      ~AuthSession.to_dict
+
+   .. rubric:: Attributes Documentation
+
+   .. autoattribute:: additional_keys
+
+   .. rubric:: Methods Documentation
+
+   .. automethod:: from_dict
+   .. automethod:: to_dict

docs/api/kittycad.models.Environment.rst

@@ -0,0 +1,21 @@
+Environment
+===========
+
+.. currentmodule:: kittycad.models
+
+.. autoclass:: Environment
+   :show-inheritance:
+
+   .. rubric:: Attributes Summary
+
+   .. autosummary::
+
+      ~Environment.DEVELOPMENT
+      ~Environment.PREVIEW
+      ~Environment.PRODUCTION
+
+   .. rubric:: Attributes Documentation
+
+   .. autoattribute:: DEVELOPMENT
+   .. autoattribute:: PREVIEW
+   .. autoattribute:: PRODUCTION

docs/api/kittycad.models.ErrorMessage.rst

@@ -0,0 +1,29 @@
+ErrorMessage
+============
+
+.. currentmodule:: kittycad.models
+
+.. autoclass:: ErrorMessage
+   :show-inheritance:
+
+   .. rubric:: Attributes Summary
+
+   .. autosummary::
+
+      ~ErrorMessage.additional_keys
+
+   .. rubric:: Methods Summary
+
+   .. autosummary::
+
+      ~ErrorMessage.from_dict
+      ~ErrorMessage.to_dict
+
+   .. rubric:: Attributes Documentation
+
+   .. autoattribute:: additional_keys
+
+   .. rubric:: Methods Documentation
+
+   .. automethod:: from_dict
+   .. automethod:: to_dict

docs/api/kittycad.models.FileConversion.rst

@@ -0,0 +1,29 @@
+FileConversion
+==============
+
+.. currentmodule:: kittycad.models
+
+.. autoclass:: FileConversion
+   :show-inheritance:
+
+   .. rubric:: Attributes Summary
+
+   .. autosummary::
+
+      ~FileConversion.additional_keys
+
+   .. rubric:: Methods Summary
+
+   .. autosummary::
+
+      ~FileConversion.from_dict
+      ~FileConversion.to_dict
+
+   .. rubric:: Attributes Documentation
+
+   .. autoattribute:: additional_keys
+
+   .. rubric:: Methods Documentation
+
+   .. automethod:: from_dict
+   .. automethod:: to_dict

docs/api/kittycad.models.FileConversionStatus.rst

@@ -0,0 +1,25 @@
+FileConversionStatus
+====================
+
+.. currentmodule:: kittycad.models
+
+.. autoclass:: FileConversionStatus
+   :show-inheritance:
+
+   .. rubric:: Attributes Summary
+
+   .. autosummary::
+
+      ~FileConversionStatus.COMPLETED
+      ~FileConversionStatus.FAILED
+      ~FileConversionStatus.IN_PROGRESS
+      ~FileConversionStatus.QUEUED
+      ~FileConversionStatus.UPLOADED
+
+   .. rubric:: Attributes Documentation
+
+   .. autoattribute:: COMPLETED
+   .. autoattribute:: FAILED
+   .. autoattribute:: IN_PROGRESS
+   .. autoattribute:: QUEUED
+   .. autoattribute:: UPLOADED

docs/api/kittycad.models.InstanceMetadata.rst

@@ -0,0 +1,29 @@
+InstanceMetadata
+================
+
+.. currentmodule:: kittycad.models
+
+.. autoclass:: InstanceMetadata
+   :show-inheritance:
+
+   .. rubric:: Attributes Summary
+
+   .. autosummary::
+
+      ~InstanceMetadata.additional_keys
+
+   .. rubric:: Methods Summary
+
+   .. autosummary::
+
+      ~InstanceMetadata.from_dict
+      ~InstanceMetadata.to_dict
+
+   .. rubric:: Attributes Documentation
+
+   .. autoattribute:: additional_keys
+
+   .. rubric:: Methods Documentation
+
+   .. automethod:: from_dict
+   .. automethod:: to_dict

docs/api/kittycad.models.Message.rst

@@ -0,0 +1,29 @@
+Message
+=======
+
+.. currentmodule:: kittycad.models
+
+.. autoclass:: Message
+   :show-inheritance:
+
+   .. rubric:: Attributes Summary
+
+   .. autosummary::
+
+      ~Message.additional_keys
+
+   .. rubric:: Methods Summary
+
+   .. autosummary::
+
+      ~Message.from_dict
+      ~Message.to_dict
+
+   .. rubric:: Attributes Documentation
+
+   .. autoattribute:: additional_keys
+
+   .. rubric:: Methods Documentation
+
+   .. automethod:: from_dict
+   .. automethod:: to_dict

docs/api/kittycad.models.ValidFileTypes.rst

@@ -0,0 +1,25 @@
+ValidFileTypes
+==============
+
+.. currentmodule:: kittycad.models
+
+.. autoclass:: ValidFileTypes
+   :show-inheritance:
+
+   .. rubric:: Attributes Summary
+
+   .. autosummary::
+
+      ~ValidFileTypes.DWG
+      ~ValidFileTypes.DXF
+      ~ValidFileTypes.OBJ
+      ~ValidFileTypes.STEP
+      ~ValidFileTypes.STL
+
+   .. rubric:: Attributes Documentation
+
+   .. autoattribute:: DWG
+   .. autoattribute:: DXF
+   .. autoattribute:: OBJ
+   .. autoattribute:: STEP
+   .. autoattribute:: STL

docs/api/kittycad.models.auth_session.AuthSession.rst

@@ -0,0 +1,29 @@
+AuthSession
+===========
+
+.. currentmodule:: kittycad.models.auth_session
+
+.. autoclass:: AuthSession
+   :show-inheritance:
+
+   .. rubric:: Attributes Summary
+
+   .. autosummary::
+
+      ~AuthSession.additional_keys
+
+   .. rubric:: Methods Summary
+
+   .. autosummary::
+
+      ~AuthSession.from_dict
+      ~AuthSession.to_dict
+
+   .. rubric:: Attributes Documentation
+
+   .. autoattribute:: additional_keys
+
+   .. rubric:: Methods Documentation
+
+   .. automethod:: from_dict
+   .. automethod:: to_dict

docs/api/kittycad.models.environment.Environment.rst

@@ -0,0 +1,21 @@
+Environment
+===========
+
+.. currentmodule:: kittycad.models.environment
+
+.. autoclass:: Environment
+   :show-inheritance:
+
+   .. rubric:: Attributes Summary
+
+   .. autosummary::
+
+      ~Environment.DEVELOPMENT
+      ~Environment.PREVIEW
+      ~Environment.PRODUCTION
+
+   .. rubric:: Attributes Documentation
+
+   .. autoattribute:: DEVELOPMENT
+   .. autoattribute:: PREVIEW
+   .. autoattribute:: PRODUCTION

docs/api/kittycad.models.error_message.ErrorMessage.rst

@@ -0,0 +1,29 @@
+ErrorMessage
+============
+
+.. currentmodule:: kittycad.models.error_message
+
+.. autoclass:: ErrorMessage
+   :show-inheritance:
+
+   .. rubric:: Attributes Summary
+
+   .. autosummary::
+
+      ~ErrorMessage.additional_keys
+
+   .. rubric:: Methods Summary
+
+   .. autosummary::
+
+      ~ErrorMessage.from_dict
+      ~ErrorMessage.to_dict
+
+   .. rubric:: Attributes Documentation
+
+   .. autoattribute:: additional_keys
+
+   .. rubric:: Methods Documentation
+
+   .. automethod:: from_dict
+   .. automethod:: to_dict

docs/api/kittycad.models.file_conversion.FileConversion.rst

@@ -0,0 +1,29 @@
+FileConversion
+==============
+
+.. currentmodule:: kittycad.models.file_conversion
+
+.. autoclass:: FileConversion
+   :show-inheritance:
+
+   .. rubric:: Attributes Summary
+
+   .. autosummary::
+
+      ~FileConversion.additional_keys
+
+   .. rubric:: Methods Summary
+
+   .. autosummary::
+
+      ~FileConversion.from_dict
+      ~FileConversion.to_dict
+
+   .. rubric:: Attributes Documentation
+
+   .. autoattribute:: additional_keys
+
+   .. rubric:: Methods Documentation
+
+   .. automethod:: from_dict
+   .. automethod:: to_dict

docs/api/kittycad.models.file_conversion.FileConversionStatus.rst

@@ -0,0 +1,25 @@
+FileConversionStatus
+====================
+
+.. currentmodule:: kittycad.models.file_conversion
+
+.. autoclass:: FileConversionStatus
+   :show-inheritance:
+
+   .. rubric:: Attributes Summary
+
+   .. autosummary::
+
+      ~FileConversionStatus.COMPLETED
+      ~FileConversionStatus.FAILED
+      ~FileConversionStatus.IN_PROGRESS
+      ~FileConversionStatus.QUEUED
+      ~FileConversionStatus.UPLOADED
+
+   .. rubric:: Attributes Documentation
+
+   .. autoattribute:: COMPLETED
+   .. autoattribute:: FAILED
+   .. autoattribute:: IN_PROGRESS
+   .. autoattribute:: QUEUED
+   .. autoattribute:: UPLOADED

docs/api/kittycad.models.file_conversion_status.FileConversionStatus.rst

@@ -0,0 +1,25 @@
+FileConversionStatus
+====================
+
+.. currentmodule:: kittycad.models.file_conversion_status
+
+.. autoclass:: FileConversionStatus
+   :show-inheritance:
+
+   .. rubric:: Attributes Summary
+
+   .. autosummary::
+
+      ~FileConversionStatus.COMPLETED
+      ~FileConversionStatus.FAILED
+      ~FileConversionStatus.IN_PROGRESS
+      ~FileConversionStatus.QUEUED
+      ~FileConversionStatus.UPLOADED
+
+   .. rubric:: Attributes Documentation
+
+   .. autoattribute:: COMPLETED
+   .. autoattribute:: FAILED
+   .. autoattribute:: IN_PROGRESS
+   .. autoattribute:: QUEUED
+   .. autoattribute:: UPLOADED

docs/api/kittycad.models.instance_metadata.InstanceMetadata.rst

@@ -0,0 +1,29 @@
+InstanceMetadata
+================
+
+.. currentmodule:: kittycad.models.instance_metadata
+
+.. autoclass:: InstanceMetadata
+   :show-inheritance:
+
+   .. rubric:: Attributes Summary
+
+   .. autosummary::
+
+      ~InstanceMetadata.additional_keys
+
+   .. rubric:: Methods Summary
+
+   .. autosummary::
+
+      ~InstanceMetadata.from_dict
+      ~InstanceMetadata.to_dict
+
+   .. rubric:: Attributes Documentation
+
+   .. autoattribute:: additional_keys
+
+   .. rubric:: Methods Documentation
+
+   .. automethod:: from_dict
+   .. automethod:: to_dict

docs/api/kittycad.models.message.Message.rst

@@ -0,0 +1,29 @@
+Message
+=======
+
+.. currentmodule:: kittycad.models.message
+
+.. autoclass:: Message
+   :show-inheritance:
+
+   .. rubric:: Attributes Summary
+
+   .. autosummary::
+
+      ~Message.additional_keys
+
+   .. rubric:: Methods Summary
+
+   .. autosummary::
+
+      ~Message.from_dict
+      ~Message.to_dict
+
+   .. rubric:: Attributes Documentation
+
+   .. autoattribute:: additional_keys
+
+   .. rubric:: Methods Documentation
+
+   .. automethod:: from_dict
+   .. automethod:: to_dict

docs/api/kittycad.models.valid_file_types.ValidFileTypes.rst

@@ -0,0 +1,25 @@
+ValidFileTypes
+==============
+
+.. currentmodule:: kittycad.models.valid_file_types
+
+.. autoclass:: ValidFileTypes
+   :show-inheritance:
+
+   .. rubric:: Attributes Summary
+
+   .. autosummary::
+
+      ~ValidFileTypes.DWG
+      ~ValidFileTypes.DXF
+      ~ValidFileTypes.OBJ
+      ~ValidFileTypes.STEP
+      ~ValidFileTypes.STL
+
+   .. rubric:: Attributes Documentation
+
+   .. autoattribute:: DWG
+   .. autoattribute:: DXF
+   .. autoattribute:: OBJ
+   .. autoattribute:: STEP
+   .. autoattribute:: STL

docs/api/kittycad.types.File.rst

@@ -0,0 +1,17 @@
+File
+====
+
+.. currentmodule:: kittycad.types
+
+.. autoclass:: File
+   :show-inheritance:
+
+   .. rubric:: Methods Summary
+
+   .. autosummary::
+
+      ~File.to_tuple
+
+   .. rubric:: Methods Documentation
+
+   .. automethod:: to_tuple

docs/api/kittycad.types.Response.rst

@@ -0,0 +1,7 @@
+Response
+========
+
+.. currentmodule:: kittycad.types
+
+.. autoclass:: Response
+   :show-inheritance:

docs/conf.py

@@ -4,39 +4,36 @@
 # list see the documentation:
 # https://www.sphinx-doc.org/en/master/usage/configuration.html
 
-import datetime
+# -- Path setup --------------------------------------------------------------
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#
 import os
-import pathlib
 import sys
-from typing import List
 
-import toml
-
-# The full version, including alpha/beta/rc tags
-# Get the version from the pyproject file.
-
-ROOT = pathlib.Path(__file__).parent.parent
-PACKAGE_SRC = ROOT / "kittycad"
 
 sys.path.insert(1, os.path.dirname(os.path.abspath(__file__)))
-sys.path.append(os.path.abspath("../kittycad"))
+sys.path.append(os.path.abspath('../kittycad'))
+
 
 # -- Project information -----------------------------------------------------
 
-project = "kittycad"
-author = "KittyCAD Team Members"
-year = datetime.date.today().year
-copyright = str(year) + ", " + author
+project = 'kittycad'
+author = 'KittyCAD Team Members'
+copyright = author
 
-with open(os.path.abspath("../pyproject.toml"), "r") as f:
+# The full version, including alpha/beta/rc tags
+# Get the version from the poetry file.
+import toml
+
+with open(os.path.abspath('../pyproject.toml'), 'r') as f:
     parsed_toml = toml.load(f)
-    version = parsed_toml["tool"]["poetry"]["version"]
-    version = "v" + version
-
+    version = parsed_toml['tool']['poetry']['version']
+    version = 'v'+version
 
 release = version
-language = "en"
-default_role = "any"
 
 
 # -- General configuration ---------------------------------------------------
@@ -45,34 +42,25 @@ default_role = "any"
 # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
 # ones.
 extensions = [
-    "autoclasstoc",
-    "sphinx.ext.autodoc",
-    "sphinx.ext.autosectionlabel",
-    "sphinx.ext.autosummary",
-    "sphinx.ext.coverage",
-    "sphinx.ext.doctest",
-    "sphinx.ext.graphviz",
-    "sphinx.ext.imgconverter",
-    "sphinx.ext.intersphinx",
-    "sphinx.ext.linkcode",
-    "sphinx.ext.mathjax",
-    "sphinx.ext.napoleon",
-    "sphinx.ext.viewcode",
-    "sphinx_autodoc_typehints",
-    "sphinx_rtd_theme",
-    "sphinx_copybutton",
-    "sphinxext.opengraph",
+    'sphinx.ext.autodoc',
+    'sphinx_autodoc_typehints',
+    'sphinx.ext.intersphinx',
+    'sphinx.ext.linkcode',
+    'sphinx_automodapi.automodapi',
+    'sphinx_rtd_theme'
 ]
 
 numpydoc_show_class_members = False
 
+automodapi_inheritance_diagram = False
+
 # Add any paths that contain templates here, relative to this directory.
-templates_path = ["_templates"]
+templates_path = ['_templates']
 
 # List of patterns, relative to source directory, that match files and
 # directories to ignore when looking for source files.
 # This pattern also affects html_static_path and html_extra_path.
-exclude_patterns = ["_build", "Thumbs.db", ".DS_Store"]
+exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store']
 
 
 # -- Options for HTML output -------------------------------------------------
@@ -80,62 +68,35 @@ exclude_patterns = ["_build", "Thumbs.db", ".DS_Store"]
 # The theme to use for HTML and HTML Help pages.  See the documentation for
 # a list of builtin themes.
 #
-html_theme = "sphinx_rtd_theme"
+html_theme = 'sphinx_rtd_theme'
 
 # Add any paths that contain custom themes here, relative to this directory.
-html_theme_path: List[str] = []
+html_theme_path = [
+]
 
 # Add any paths that contain custom static files (such as style sheets) here,
 # relative to this directory. They are copied after the builtin static files,
 # so a file named "default.css" will overwrite the builtin "default.css".
-html_static_path: List[str] = []
+html_static_path = []
 
 # The name of the Pygments (syntax highlighting) style to use.
-pygments_style = "trac"
-
-# pygments_style = "lovelace"
-# pygments_dark_style = "one-dark"
-
-# -- autodoc --
-
-autodoc_default_options = {
-    "members": True,
-    "special-members": True,
-    "private-members": True,
-    "inherited-members": True,
-    "undoc-members": True,
-    "exclude-members": "__weakref__",
-}
-
-autodoc_inherit_docstrings = True
-
-# -- autosummary --
-
-autosummary_generate = True
-autoclass_content = "both"
-html_show_sourcelink = False
-set_type_checking_flag = True
-
-# -- autosectionlabel --
-
-autosectionlabel_prefix_document = True
-
-# -- intersphinx --
+pygments_style = 'trac'
 
+# Intersphinx configuration.
+# FROM: https://www.sphinx-doc.org/en/master/usage/extensions/intersphinx.html#module-sphinx.ext.intersphinx
 intersphinx_mapping = {
-    "python": ("https://docs.python.org/3", None),
+    'python': ('https://python.readthedocs.io/en/latest/', None),
 }
 
-
 # This is a function linkcode_resolve(domain, info), which should return the URL
 # to source code corresponding to the object in given domain with given information.
 # FROM: https://www.sphinx-doc.org/en/master/usage/extensions/linkcode.html
 def linkcode_resolve(domain, info):
-    if domain != "py":
+    if domain != 'py':
         return None
-    if not info["module"]:
+    if not info['module']:
         return None
-    filename = info["module"].replace(".", "/")
+    filename = info['module'].replace('.', '/')
     return "https://github.com/kittycad/kittycad.py/%s.py" % filename
 
 
@@ -143,10 +104,10 @@ def linkcode_resolve(domain, info):
 try:
     import enchant  # noqa # pylint: disable=unused-import
 except ImportError as ex:
-    print(
-        "enchant module import failed:\n" "{0}\n" "Spell checking disabled.".format(ex),
-        file=sys.stderr,
-    )
+    print("enchant module import failed:\n"
+          "{0}\n"
+          "Spell checking disabled.".format(ex),
+          file=sys.stderr)
 else:
-    extensions.append("sphinxcontrib.spelling")
+    extensions.append('sphinxcontrib.spelling')
     spelling_show_suggestions = True

docs/html/.buildinfo

@@ -1,4 +1,4 @@
 # Sphinx build info version 1
 # This file hashes the configuration used when building these files. When it is not found, a full rebuild will be done.
-config: c495e8d8690101e5ddd92e67eb0d0059
+config: fedaf56120cb91b327d8a023250f850a
 tags: 645f666f9bcd5a90fca523b33c5a78b7